Sharp DV-MX1U Operating instructions

DV-MX1U
INFORMATION
FUNCTIONS
SETUP
OPERATION MANUAL
PREFACE
PRECAUTIONS
DVD Video Player
MODEL
DV- M X 1
PROGRESSIVE
POWER
STOP
PLAY
The region number for this DVD player is 1.
ESPAÑOL
EJECT
LABEL-SIDE
Please read this Operation Manual carefully
before using your DVD Video Player.
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
1
–1–
E61U1UD_1.indd 1
EN
8/8/2005 11:49:28 AM
PRECAUTIONS
For Customer Use:
For future reference, record the serial number (located at the
bottom of the unit) in the space provided.
PRECAUTIONS
WARNING:
Model No.:
_______DV-MX1U_______
Serial No.:
______________________
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITAR LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE
ET POUSSER JUSQU’AU FOND.
CAUTION
This symbol warns the user of uninsulated
voltage within the unit that can cause dangerous electric shocks.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
This symbol alerts the user that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
“WARNING—FCC Regulations state that any unauthorized changes or modifications
to this equipment not expressly approved by the manufacturer could void the user’s
authority to operate this equipment.”
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Este aparato digital de la Clase B cumple con la norma ICES-003 de Canadá.
CAUTION:
THIS UNIT IS A CLASS 1 LASER PRODUCT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
AS THE LASER BEAM USED IN THIS UNIT IS HARMFUL TO THE EYES, DO NOT ATTEMPT TO DISASSEMBLE THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
Products that have earned ENERGY STAR® are designed to protect the environment through superior energy efficiency.
–2–
E61U1UD_1.indd 2
EN
8/8/2005 11:50:00 AM
1) Read Instructions - All the safety and operating instructions should be read before the product is operated.
2) Retain Instructions - The safety and operating instructions
should be retained for future reference.
3) Heed Warnings - All warnings on the product and in the
operating instructions should be adhered to.
4) Follow Instructions - All operating and use instructions
should be followed.
5) Cleaning - Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
6) Attachments - Do not use attachments not recommended
by the product manufacturer as they may cause hazards.
7) Water and Moisture - Do not use this product near water
- for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool;
and the like.
PORTABLE CART WARNING
8) Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The product
may fall, causing serious injury to a
child or adult, and serious damage
to the product. Use only with a cart,
stand, tripod, bracket or table recom- S3125A
mended by the manufacturer or sold
with the product. Any mounting of the product should
follow the manufacturer’s instructions, and should use a
mounting accessory recommended by the manufacturer.
9) A product and cart combination should be moved with
care. Quick stops, excessive force and uneven surfaces
may cause the product and cart combination to overturn.
10) Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of
the product and to protect it from overheating, and these
openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed,
sofa, rug or other similar surface. This product should not
be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
11) Power Sources - This product should be operated only
from the type of power source indicated on the marking label. If you are not sure of the type of power supply
to your home, consult your product dealer or local power
company. For products intended to operate from battery
power, or other sources, refer to the operating instructions.
12) Grounding or Polarization - This product may be equipped
with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety feature. If
you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
13) Power-Cord Protection - Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.
14) Lightning - For added protection for this product during a
lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and powerline surges.
15) Power lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact with
them might be fatal.
16) Overloading - Do not overload wall outlets, extension
cords or integral convenience receptacles as this can
result in a risk of fire or electric shock.
17) Object and Liquid Entry - Never push objects of any kind
into this product through openings as they may touch
dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any
kind on the product.
18) Servicing - Do not attempt to service this product yourself
as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19) Damage Requiring Service - Unplug this product from the
wall outlet and refer servicing to qualified service personnel under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the
product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as
an improper adjustment of other controls may result
in damage and will often require extensive work by a
qualified technician to restore the product to its normal
operation,
e) If the product has been dropped or damaged in any
way, and
f ) When the product exhibits a distinct change in performance - this indicates a need for service.
20) Replacement Parts - When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock or other hazards.
21) Safety Check - Upon completion of any service or repairs
to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
22) Heat - The product should be situated away from heat
sources such as radiators, heat registers, stoves or other
products (including amplifiers) that produce heat.
–3–
E61U1UD_1.indd 3
PRECAUTIONS
IMPORTANT SAFEGUARDS
EN
8/8/2005 11:50:01 AM
PREFACE
Setting the Main Unit
Table of Contents
You can install this unit horizontally or vertically. Attach the Foot to
the bottom of the unit (for Horizontal installation) or bottom of the
Stand (for Vertical installation).
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
PRECAUTIONS
PREFACE
Stand
(supplied)
Foot
(supplied/1 set)
Setting the Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Symbols Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Supplied Accessory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
About Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Copy Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Copyright Warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Notice for Progressive Scan Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Nonuse Periods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
No Fingers or Other Objects Inside . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Location and Handling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Warning of Dew Formation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
ABOUT THE DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Unplayable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ABOUT THE REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Installing the Batteries for the Remote Control . . . . . . . . . . . . . . . . . . . . 7
Operable Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Bottom of the unit
Horizontal installation (laying position):
Place the unit as POWER comes on your right.
DV- MX 1
DV- MX 1
PREFACE
label
SETUP
Hint
• Insert a disc with the label facing up.
Vertical installation (standing position):
Place the unit as its dent matches the catch of the Stand. As you position the unit be sure POWER is located at the top.
DV-M X 1
Catch
labe
l
DV- M X 1
Stand
Front
Hint
• Insert a disc with its label facing to the left.
Symbols Used in This Manual
The following symbols appear in some headings and notes in
this manual.
Description refers to playback of DVD-Video discs (including DVD-RW/-R and DVD+RW/+R discs (Video mode only)).
Description refers to playback of VR mode (Video Recording
format). The VR mode (Video Recording format) is a recording mode to enjoy editing the program or manual mode
for recording in desired resolution and time.
Description refers to playback of Audio CDs.
Description refers to playback of MP3 discs.
CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Connection to a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
RF Modulator Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Connection to an Audio System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Rear Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
FUNCTIONS
PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
DISC Menu / Resume / Paused and Step-by-Step Playback /
Fast Forward/Reverse Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Slow Forward/Slow Reverse / Zoom / Rapid Play / Playing
the Disc Recorded in VR Mode (Video Recording Format) . . . . . . . 11
MP3 PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
ONSCREEN DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
SEARCH FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Track Search / Title/Chapter Search / Time Search . . . . . . . . . . . . . . . . 13
MARKER SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
REPEAT / RANDOM / PROGRAMMED PLAYBACK . . . . . . . . . . . .14
Repeat Playback / Repeat A-B Playback / Random Playback /
Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
SPECIAL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Subtitle Language / Audio Language / Camera Angles /
Black Level Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Stereo Sound Mode / Virtual Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
DVD SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
QUICK SETUP Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
CUSTOM Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
LANGUAGE Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
DISPLAY Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
AUDIO Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PARENTAL Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
OTHERS Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Reset to the Default Setting (except for PARENTAL Setting) . . . . . . . 19
INFORMATION
LANGUAGE LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
TROUBLESHOOTING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
SERVICE INFORMATION FOR THE U.S.. . . . . . . . . . . . . . . . . . . . .20
ESPAÑOL
IMPORTANTES MEDIDAS DE SEGURIDAD Y PRECAUCIONES . . . . . .22
CONSUMER LIMITED WARRANTY . . . . . . . . BACK COVER
Supplied Accessory
• Remote control with two
AA size batteries
• Video/Audio cables
• Foot (1 set)
• Stand
• Operation Manual
DVD Video Player
MODEL
DV-MX1U
OPERATION MANUAL
DV- M X 1 U
PROGRESSIVE
POWER
STOP
PLAY
EJECT
LABEL-SIDE
1
–4–
E61U1UD_1.indd 4
EN
8/8/2005 11:50:02 AM
About Copyright
Unauthorized copying, broadcasting, public performance and lending
of discs are prohibited.
Copy Protection
This unit supports Macrovision copy protection.
On DVD discs that include a copy protection code, if the contents of
the DVD disc are copied using a VCR, the copy protection code prevents the videotape copy from playing normally.
U.S. Patent Nos. 4,631,603; 4,819,098; 4,907,093; 5,315,448; and
6,516,132.
This product incorporates copyright protection technology that
is protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized
by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
It is the intent of SHARP that this product be used in full compliance
with the copyright laws of the United States and that prior permission
be obtained from copyright owners whenever necessary.
Notice for Progressive Scan Outputs
Consumers should note that not all high definition television sets are
fully compatible with this product and may cause artifacts to be displayed in the picture. In case of picture problems with 525 progressive scan output, it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions regarding
your TV set compatibility with this 525p DVD player, please contact
our customer service center.
NOTE:
This unit can be used only where the power supply is AC
120 V, 60 Hz. It cannot be used elsewhere.
Laser Diode Properties
Material:
GaAs
Wave length:
DVD: 655 nm
CD:
790 nm
Emission Duration: Continuous
Laser output:
Max. 0.8 mW
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater
Systems, Inc.
is a trademark of DVD Format/Logo Licensing Corporation.
Nonuse Periods
• When the unit is not being used, switch the unit to the standby
mode.
• When left unused for a long period of time, the unit should be
unplugged from the household AC outlet.
No Fingers or Other Objects Inside
Do not put your fingers or objects in the disc slot.
Dew may form inside the unit under the following conditions:
• Immediately after a heater is turned on.
• In a steamy or humid room.
• When the unit is suddenly moved from a cold to warm environment.
If dew forms inside this unit, it may not operate properly. In such case,
turn on the power and wait for more than 2 hours for the moisture to
evaporate.
PREFACE
Warning of Dew Formation
Copyright Warning
“Licensed under one or more of U.S. Pat. 4,972,484, 5,214,678,
5,323,396, 5,530,655, 5,539,829, 5,544,247, 5,606,618, 5,610,985,
5,740,317, 5,777,992, 5,878,080, or 5,960,037.”
• Do not place the unit in direct sunlight, or near heat sources.
• Depending on the environment, the temperature of the unit may
increase slightly. This is not a malfunction.
• Keep the unit away from strong magnetic objects.
• Do not place any object containing water or other liquids on the
unit. In the event that liquid should enter the cabinet, unplug the
unit immediately and contact the retailer or service center approved
by SHARP immediately.
• Do not remove the unit’s cabinet. Touching parts inside the cabinet
could result in electric shock and/or damage to the unit. For service
and adjustment inside the cabinet, call a qualified dealer or service
center approved by SHARP.
• Be sure to remove a disc and unplug the AC power cord from the
output before carrying the unit.
Maintenance
Servicing
1. Please refer to relevant topics in the “TROUBLESHOOTING GUIDE”
on page 20 before returning the product.
2. Do not attempt to service this unit yourself. Instead, unplug it and
contact a SHARP Approved Service Center for inspection.
(See CONSUMER LIMITED WARRANTY at the end of this manual.)
3. Be sure the service technician uses authorized replacement parts
or their equivalents. Unauthorized parts may cause fire, electrical
shock, or other hazards.
4. Following any service or repair, be sure the service technician performs safety checks to certify that this unit is in safe operating order.
5. If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off,
unplug the power plug, and please call our help line mentioned on
page 20 to locate an Authorized Service Center.
Cleaning the Cabinet
• Use a soft cloth slightly moistened with a mild detergent solution. Do
not use a solution containing alcohol, spirits, ammonia or abrasive.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the
disc from the center out. Do not wipe in a circular motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray
intended for analog records.
Recommended Measures for Optimum Picture Excellence
This unit is a precision device constructed using extremely accurate
technology.
• The disc cannot be played if the disc drive component is worn out
or if the internal pick up lens is dirty.
• If this unit still does not perform properly although you refer to
the relevant sections and to “TROUBLESHOOTING GUIDE” on page
20, the laser optical pickup unit may be dirty. Consult a SHARP
Approved Service Center for inspection and cleaning of the laser
optical pickup unit.
Disc Handling
• When you handle a disc, hold it by its edge and try not to touch the
surface of the disc.
• Always store a disc in its protective case when it is not used.
Location and Handling
• Do not place anything directly on top of the unit. Do not place the
unit directly on top of the TV.
• Depending on the TV, noise or disturbance of the picture and/or
sound may be generated if the unit is placed too close to your TV.
In this case, please ensure enough space between your TV and the
unit.
• Do not cover or place the unit in enclosed spaces to prevent excessive temperature build up.
–5–
E61U1UD_1.indd 5
EN
8/8/2005 11:50:05 AM
ABOUT THE DISCS
Playable Discs
Playable discs
Mark (logo)
Region code
Recorded
signals
PREFACE
DVD-Video
*1, 2, 3
OR
DVD-RW
DVD-R
* 1, 3, 4, 5,
6, 8, 9
-
DVD+RW
DVD+R
* 1, 3, 4, 5,
7, 8, 9
-
Audio CD
* 3, 5, 10
-
Digital audio
CD-RW
CD-R
* 3, 4, 5,
8, 9, 10
-
Digital audio
or
MP3
Disc types
&YBNQMF
Digital video
(MPEG2)
5JUMF
5JUMF
$IBQUFS $IBQUFS $IBQUFS $IBQUFS $IBQUFS $IBQUFS
&YBNQMF
Only 5 inch discs are available on this unit.
5SBDL
.1
&YBNQMF
5SBDL
5SBDL
5SBDL
5SBDL
5SBDL
5SBDL
5SBDL
(SPVQ
5SBDL
5SBDL
5SBDL
(SPVQ
5SBDL
Unplayable Discs
If you cannot play back a disc which bears one of the marks
above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in
other color systems such as PAL cannot be played back.
*2: Certain DVD-Video discs do not operate as described in this
manual due to the intentions of the disc’s producers.
*3: Scratched or stained discs may not be played back.
*4: Some discs cannot be played back because of incompatible
recording conditions, characteristics of the recorder or special
properties of discs.
*5: You can play back discs which bear the marks above. If you use
nonstandardized discs, this unit may not play them back. Even if
they are played back, the sound or video quality will be compromized.
*6: Depending on the recording status of a disc, the disc may not
be played back at all or normally (the picture or sound may not
be smooth, etc.). In this case, you need to finalize the disc with
the DVD recorder. Refer to the manual accompanying the DVD
recorder.
*7: Only the discs recorded in the video mode and finalized can be
played back. Unfinalized discs cannot be played back. Depending
on the recording status of a disc, the disc may not be played back
at all or the picture or sound may not be smooth, etc.
*8: If the recorded portion of the disc is too small (less than 2 3/16
inches (55 mm) across), it may not play back properly.
*9: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.
*10: Also DTS CD is available when the unit is connected to the DTS
decoder.
• NEVER play back the following discs. Otherwise, malfunction
may result:
3 inch (8 cm) disc, DVD-RAM, CD-I, Photo CD, Video CD, DVD with
region codes other than 1 or ALL, DVD-ROM for personal computers,
CD-ROM for personal computers
Hint
• Never insert a disc which is broken or abnormal shape (other than
5 inch (12 cm) round disc).
• Do not use a single CD adaptor which makes 3 inch (8 cm) to 5
inch (12 cm) disc.
• On the following disc, the sound MAY NOT be heard.
Super Audio CD
Hint
• Only the sound recorded on the normal CD layer can be delivered.
The sound recorded on the high density Super Audio CD layer
cannot be delivered.
• Any other discs without compatibility indications.
:This label indicates playback compatibility with DVD-RW discs
recorded in VR mode (Video Recording Format).
Hint
• This unit cannot play back the DVD-RW/-R recorded of the oncecopy programs.
• This unit cannot play back the DVD-R discs recorded in VR mode
(Video Recording Format).
–6–
E61U1UD_1.indd 6
EN
8/8/2005 11:50:06 AM
ABOUT THE REMOTE CONTROL
POWER
SEARCH
MODE
EJECT
1
2
3
4
5
6
7
8
9
DISPLAY
AUDIO
SUB
TITLE
ANGLE
REPEAT
CLEAR
A-B
PAUSE
0
Disc type
Button
(Alphabetical order)
+10
• To select chapter or title
directly.
• To select track directly.
SKIP
• To move the cursor and deter- • To move the cursor and determine its position.
mine its position.
%.4%2
PLAY
REV
FWD
STOP
MENU
TOP MENU
• To repeat between your chosen point A and B.
• To change the camera angle
to see the sequence being
played back from a different
angle. (DVD-Video)
• To select a desired audio language or sound mode.
!"
MODE
ENTER
ZOOM
RETURN
!.',%
DVD VIDEO PLAYER
!5$)/
Installing the Batteries for the Remote
Control
Install two AA size batteries (supplied) matching the
polarity indicated inside battery compartment of the
remote control.
Hint
• Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.
$)30,!9
%*%#4
2%6
&7$
-%.5
Operable Range
Keep in mind the following when using the remote
control:
• Make sure that there is no obstacle between the
remote control and the remote sensor on the unit.
• The maximum operable range as follows;
Line of sight:
approximately 23 feet (7 m)
Either side of center:
approximately 16 feet (5 m) within 30 degrees
Above: approximately 16 feet (5 m) within 15 degrees
Below: approximately 10 feet (3 m) within 30 degrees
-/$%
0!53%
0,!9
0/7%2
2%0%!4
DV-M X 1
PROGRESSIVE
POWER
2%452.
STOP
PLAY
EJECT
3%!2#(
-/$%
LABEL-SIDE
3%450
3+)0
34/0
35"
4)4,%
4/0-%.5
–7–
E61U1UD_1.indd 7
• To display the current disc
mode.
• To eject the disc.
• To eject the disc.
• To search forward/backward
through a disc.
• To search forward/backward
• To begin slow forward/reverse
through a disc.
playback during the pause
mode.
• To call up the menu on a disc.
• To call up the file list. (MP3)
• To set rapid play off/x1.3/x0.8.
• To set black level on/off.
• To set virtual surround on/off.
• To pause disc playback.
• To advance playback one
frame at a time.
• To arrange the playing order
or play randomly.
• To set virtual surround on/off.
• To begin disc playback.
• To begin disc playback.
• To turn the unit on or off.
• To turn the unit on or off.
• To pause disc playback.
• To play a track or disc repeatedly. (CD)
• To play a track, group or disc
repeatedly. (MP3)
• To return to the previous
• To return to the previous
operation.
operation.
•
To
search track.
• To search chapter, title or time. • To search
(CD)
• To rapidly return to a location • To rapidly time.
return to a location
of disc.
of disc.
• Search the markers.
• Search the markers. (CD)
• To enter the setup mode or to • To enter the setup mode or to
change setup items.
change setup items.
• To play a chapter or title
repeatedly.
• To skip chapters or titles.
• To skip tracks.
• To stop playback.
• To stop playback.
• To select subtitles on a disc.
—
• To call up the top menu on a
disc. (DVD-Video)
• To return to the top file of the
highest hierarchy in the program and file list. (MP3)
• To magnify the part of the
picture. (x2/x4)
://-
—
• To select a desired sound
mode. (CD)
• To clear the markers. (CD)
• To remove status number in
program input.
• To clear the numbers entered
incorrectly.
• To cancel the point for A-B
repeat. (CD)
• To display the current disc
mode.
• To clear the markers.
• To clear the numbers entered
incorrectly.
• To cancel the point for A-B
repeat.
#,%!2
• To repeat between your chosen point A and B. (CD)
PREFACE
SETUP
—
EN
8/8/2005 11:50:08 AM
SETUP
CONNECTIONS
Connection to a TV
CAUTION:
• Be sure to turn off the unit and equipment to be connected before connecting.
• Read through the Operation Manual for the equipment to be connected.
• Be sure that the colors of the jacks and plugs match up when connecting the cable.
• Be sure to keep the unit connection cables separate from the TV antenna cable when you install the unit, because it may cause electrical
interference when you are watching television programs.
DV- MX1
CAUTION:
• Connect the unit directly to the TV. Do not connect the unit to a VCR, then connect the VCR to the TV. Copyright protection in the VCR could distort the picture
playing on the unit.
Basic Audio
TV
Method 1
Good picture
PROGRESSIVE
POWER
STOP
PLAY
VCR
TV
Method 2
Better picture
Method 3
Best picture
COMPONENT
VIDEO IN
AUDIO IN
L
EJECT
This unit
LABEL-SIDE
R
Y
S-VIDEO IN
VIDEO IN
Y
PB
CB
or
PR
AUDIO
OUT
Y
VIDEO
OUT
CR / PR
CB / P B
COMPONENT
VIDEO OUT
CB /
CR /
COMPONENT
VIDEO OUT
S-VIDEO OUT
AUDIO
OUT
CR / PR
CB / P B
COMPONENT S-VIDEO
OUT
VIDEO OUT
Y
VIDEO
OUT
Y
VIDEO
OUT
AUDIO
OUT
AUDIO
OUT
VIDEO OUT
L
R
Y
VIDEO
OUT
L
R
AUDIO
OUT
L
L
R
R
DIGITAL
AUDIO OUT
COAXIAL
DIGITAL
AUDIO OUT
COAXIAL
DIGITAL
AUDIO OUT
COAXIAL
SETUP
This unit
Component
video cable
(commercially
available)
DIGITAL
AUDIO OUT
COAXIAL
L
R
Audio cable
(supplied)
(Analog) AUDIO OUT
CR
S-video cable
(commercially
available)
DIGITAL
AUDIO OUT
COAXIAL
Video cable
(supplied)
COMPONENT VIDEO OUT
Hint
• The unit is sending each video signals simultaneously. If you connected an S-VIDEO OUT and/or a COMPONENT VIDEO OUT with the VIDEO
OUT, make sure your TV’s input mode is set correctly according to the connection you made.
• If you want to listen to the audio through audio equipment, connect only the S-video, component video cable or video cable to the TV.
• You will not be able to hear all of the sound being output by the unit if you use the video/audio cable (supplied) to a monaural TV that has
only one audio input jack.
If your TV is compatible with 525 progressive scanning and you want to enjoy that high quality picture;
You must select the connection Method 3 above and progressive scanning mode. To set the mode, set “PROGRESSIVE” to “ON” in the DISPLAY
menu, so that the PROGRESSIVE indicator on the front panel lights on. See pages 16, 17 for more details.
• When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO OUT and S-VIDEO OUT jacks will be distorted or not be output at all.
If your TV is not compatible with progressive scanning;
Use this unit in interlace mode and set “PROGRESSIVE” to “OFF” either in the DISPLAY menu or by pressing and holding PLAY B on the front of the
unit for more than 5 seconds, so that the PROGRESSIVE indicator on the front panel lights off.
RF Modulator Connection
DIGITAL
AUDIO OUT
COAXIAL
If your TV has Antenna input jack only, it is still possible to connect this unit to your TV by using a STEREO AUDIO/VIDEO RF Modulator
(commercially available).
In this case, follow the instructions below.
(Back of this unit)
Cable Antenna
1. Connect the AUDIO/VIDEO output jacks of this unit to the AUDIO/
Signal
(Back of TV)
VIDEO input jacks of your RF Modulator by audio and video cables.
2. The antenna input jack of your TV may have been already occupied.
Stereo Audio/Video RF Modulator
1
(commercially available)
If so, disconnect the RF cable from your TV, and then connect the
CHANNEL
TO TV VIDEO
AUDIO
AC 120V ANT IN
RF cable to your RF Modulator (usually marked “ANT IN”).
3
4
R
L
Video/Audio
3. Connect your RF modulator to your TV by another RF cable.
cables
4. Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the
(supplied)
TV channel is least used in your area. If your RF modulator has a Modulator/
Antenna switch, set it according to your RF modulator’s manual.
2
5. Turn on your TV and choose the same channel as you set the RF modcable
3 RF(commercially
available) Antenna input jack
ulator’s channel 3/4 switch to. For more details, follow the instructions
supplied with the RF Modulator.
L
R
AUDIO
OUT
Y
VIDEO
OUT
C B / PB
CR / P R
COMPONENT S-VIDEO
OUT
VIDEO OUT
E175216
Hint
• The quality of picture may become poor if the unit is connected to an RF Modulator.
–8–
E61U1UD_1.indd 8
EN
8/8/2005 11:50:13 AM
Connection to an Audio System
Method 1
Stereo system
Analog audio
input jacks
AUDIO
L
Method 2
Dolby Digital decoder, DTS decoder,
MD deck or DAT deck
COAXIAL
R
Coaxial digital
audio cable
(commercially available)
Audio cable
(supplied)
This unit
DIGITAL
AUDIO OUT
COAXIAL
L
AUDIO
OUT
SETUP >
DOLBY DIGITAL
DPCM
DIGITAL AUDIO OUT
Setting
(QUICK) >
DTS
OFF
Connection
Connecting to a Dolby Digital
or DTS decoder for Dolby
Digital or DTS audio output.
* To complete these settings, refer to pages 16, 18.
Hint
• Playing back a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
• AUDIO OUT jacks are not available on the DTS audio.
Connecting to the other
equipment (an MD deck or
DAT deck etc.) without Dolby
Digital decoder.
C Digital Connection to Audio Equipment or MD deck without a Dolby Digital Decoder
• Audio CD
Audio CDs can be transferred digitally to other equipment such as
an MD deck or DAT deck, play the disc as you would normally with
the connection shown above. Audio CDs recorded in the DTS format cannot be transferred digitally or via analog.
• Some Audio CDs have a short silent section between musical tracks.
When sound from discs such as these is digitally recorded by connecting the unit directly to a digital recorder (such as an MD deck or
DAT deck), the music may be recorded continuously and track numbers may be lost.
• DVD
DVDs recorded in Dolby Digital 5.1 channel surround sound or DTS
cannot be connected digitally to external recording equipment
such as an MD deck or DAT deck.
It may be possible to record “Dolby Digital” via a digital connection
if the unit’s output is set to “DPCM” (see page 18 “AUDIO Setting”).
Analog recording is possible but not for DTS recorded audio.
SETUP >
DOLBY DIGITAL
(QUICK) >
DTS
SETUP
Connection
Connecting to Stereo System.
Y
VIDEO
OUT
Y
VIDEO
OUT
Setting
L
R
DIGITAL
AUDIO OUT
COAXIAL
R
AUDIO
OUT
(Analog) AUDIO OUT
BITSTREAM
DPCM
OFF
* To complete these settings, refer to pages 16, 18.
Hint
• The audio source on a disc in a Dolby Digital 5.1 channel surround
format cannot be recorded as digital sound by an MD or DAT
deck.
• Playing back a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
• By hooking this unit up to a Multi-channel Dolby Digital decoder,
you can enjoy high-quality Dolby Digital 5.1 channel surround
sound as heard in the movie theatres.
• By hooking this unit up to the DTS decoder, you can enjoy 5.1
channel surround system which reproduces the original sound as
truthfully as possible. 5.1 channel surround system is developed
by the Digital Theater System Inc.
Rear Terminals
DIGITAL
AUDIO OUT
COAXIAL
L
Y
VIDEO
OUT
3. VIDEO OUT jack
Connect the supplied video cable (yellow) here
through the TV’s video input jack.
4. COMPONENT VIDEO OUT jacks
Connect an optional component video cable
here through the component video input jacks
of TV.
5. S-VIDEO OUT jack
Connect an optional S-video cable here
through the S-video input jack of a TV.
C R / PR
CB / PB
COMPONENT S-VIDEO
OUT
VIDEO OUT
4
AUDIO
OUT
3
R
1
2
1. DIGITAL AUDIO OUT COAXIAL jack
Connect an optional coaxial digital audio cable
here through the coaxial digital audio input
jack of a decoder or audio receiver.
2. AUDIO OUT jacks
Connect the supplied audio cable (red/white)
here through the audio input jacks of a TV or
other audio equipment.
5
–9–
E61U1UD_1.indd 9
EN
8/8/2005 11:50:15 AM
FUNCTIONS
PLAYBACK
Before: Turn on the TV, amplifier and any other equipments which
are connected to this unit. Make sure the TV and audio receiver (commercially available) are set to the correct channel.
(
page 12)
Resume
Press STOP C during playback.
Resume message will appear on the
TV screen.
Press PLAY B, playback will resume
from the point at which playback was
stopped.
Hint
You can change the On-Screen language in “PLAYER MENU” setting.
(Refer to pages 16, 17.)
Resume ON
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
DV-MX1
1
4
3
<Example : DVD>
PROGRESSIVE
POWER
STOP
PLAY
POWER
1
SEARCH
MODE
EJECT
1
2
3
4
5
7
8
9
0
+10
DISPLAY
Hint
• To cancel resume, press STOP C one more time during the stop
mode. On some discs, STOP C will not work while the Resume
message appears. Please wait until the message disappears.
• For MP3, playback will resume from the beginning of the track at
which playback was stopped.
• The resume information will be kept even when the power is
turned off.
AUDIO
SUB
TITLE
EJECT
6
ANGLE
REPEAT
CLEAR
LABEL-SIDE
A-B
3
4
PAUSE
SKIP
PLAY
REV
FWD
STOP
SETUP
MENU
TOP MENU
MODE
ENTER
ZOOM
RETURN
2
Paused and Step-by-Step Playback
DVD VIDEO PLAYER
Press PAUSE F during playback.
• Playback will be paused and sound will be muted.
To continue playback, press PLAY B.
1.
2. Insert a disc with label
facing to the left.
The disc goes forward by one frame each time PAUSE F is pressed
during the pause mode.
To continue playback, press PLAY B.
LABEL-SIDE
FUNCTIONS
3. To start playback.
Hint
• On DVDs, set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in the pause mode are blurred. (Refer to pages 16, 17.)
4. To stop playback.
Fast Forward/Reverse Search
Hint
• When you play MP3 files, details are on page 12.
• A “prohibited icon” may appear at the top-right on the TV
screen when the operation is prohibited by the disc or this
unit.
• Some DVDs may start playback from title 2 or 3 due to specific
programs.
• During the playback of a 2-layered disc, pictures may stop for a
moment. This happens while the 1st layer is being switched to the
2nd layer. This is not a malfunction.
• A DVD-RW disc recorded in the VR mode may freeze momentarily
during playback depending on how the playlist was made and
edited (deleted titles, repeated recording).
DISC Menu
Some discs contain menus which allow you to customize disc playback.
Use Cursor K / L / s / B or the Number buttons to select an item,
then press ENTER or PLAY B.
Press FWD g or REV h repeatedly during playback to select the required forward or reverse speed.
E1
To continue playback, press PLAY B.
Hint
• On DVDs, set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures during Fast Forward and Reverse Search are blurred.
• For DVDs, Fast Forward or Reverse Search speed is different
depending on the disc.
• For DVDs, approximate speed is 1(x2), 2(x8), 3(x20), 4(x50) and 5(x100).
• For Audio CDs and MP3, approximate speed is 1(x2), 2(x8) and
3(x30).
• For Audio CDs and MP3, sound will be output during Fast Forward
or Reverse Search.
Calling up a Menu Screen (for playback of a DVD Video)
• Press MENU to call up the DVD menu.
• Press TOP MENU to call up the title menu.
Hint
• If the feature is not available,
symbol may appear on the TV
screen.
• Menu operations may vary depending on the disc. Refer to the
manual accompanying the disc for more details.
– 10 –
E61U1UD_2.indd 10
EN
8/8/2005 11:51:52 AM
Slow Forward/Slow Reverse
2. Press ENTER to switch among “
(x1.3)”, “
(x0.8)” and “OFF”.
or
Press FWD g or REV h repeatedly during the
pause mode to select the required forward or reverse
speed.
To continue playback, press PLAY B.
or
1
Hint
• Slow Forward or Reverse speed is different depending on the disc.
Approximate speed is 1(1/16), 2(1/8) and 3(1/2).
• On DVDs, set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in the slow playback mode are blurred. (Refer to pages 16, 17.)
Zoom
The zoom function allows you to enlarge the video image and to pan
through the enlarged image.
1. During playback, press ZOOM.
: Plays back approximately at 0.8 times of normal playback.
: Plays back approximately at 1.3 times of normal playback.
OFF : No effects.
3. To continue normal playback, press PLAY B.
Hint
• Audio (language) setting cannot be changed while using this mode.
• Virtual Surround and Black Level Setting cannot be changed while
using this mode.
• Virtual Surround does not function while using this mode.
• This feature may not work at some point in a disc.
• When using digital audio connection, the DPCM sound will be
output.
Playing the Disc Recorded in VR Mode
(Video Recording Format)
• The picture becomes twice as large.
2. Press ZOOM repeatedly to change the
zoom factor: “x2”, “x4” or “OFF”.
DVDs recorded in VR mode can have a PLAYLIST assigned to alter the
order or content to be played. If a PLAYLIST has been created, you can
choose the ORIGINAL or PLAYLIST option.
1. Press MENU in stop mode.
3. Once a desired zoom factor is set, use
ORIGINAL
Cursor K / L / s / B to move the
zoomed picture across the screen.
PLAYLIST
1 ORIGINAL1
2 ORIGINAL2
3 ORIGINAL3
4 ORIGINAL4
5 ORIGINAL5
6 ORIGINAL6
FUNCTIONS
• The current setting screen will appear.
• Pressing MENU during playback is not valid.
2.
4. To exit zoom function, press ZOOM repeatedly to select “OFF”.
or
ORIGINAL
PLAYLIST
1 PLAYLIST1
2 PLAYLIST2
3 PLAYLIST3
4 PLAYLIST4
5 PLAYLIST5
ORIGINAL : A list of titles which are recorded with a DVD recorder.
PLAYLIST : A list of titles which is made based on the ORIGINAL
edited list.
Hint
• Zooming function does not work while the disc menu is showing up.
• x4 zoom is not available on some discs.
• Zooming function is also available during pause mode.
3. To select the desired title.
or
Rapid Play function is available only during playback.
Available only on discs recorded in the Dolby Digital format, Rapid
Play plays back in slightly faster/slower speed with sound that is close
to normal playback quality.
1. During playback, press MODE.
OFF
• The current setting appears.
1 ORIGINAL1
2 ORIGINAL2
3 ORIGINAL3
4 ORIGINAL4
5 ORIGINAL5
To decide.
Hint
• PLAYLIST will not be displayed when it has not been made.
• Resume playback will not be possible if you change the setting.
• When discs recorded in VR mode, changing the audio (MAIN,
SUB or MAIN+SUB) is effective only when using an analog connection. Although you may be able to change the settings of the
on-screen display, it will not affect the sound when using a digital
connection.
– 11 –
E61U1UD_2.indd 11
ORIGINAL
or
Rapid Play
EN
8/8/2005 11:52:19 AM
MP3 PLAYBACK
MP3 is a method of compressing files. You can copy MP3 files on CD-RW/-Rs from the computer and play back the files on this unit.
Insert a MP3-format disc, then press MENU to call up the FILE LIST on
the TV screen.
1.
FILE LIST
or
FOLDER
MP3
DISC NAME
folder name 1
folder name 2
folder name 3
folder name 4
file name 1
file name 2
ENTER
PLAY
1/
2
folder name 1
When selecting the folder:
• Press Cursor B when you want to go to the next hierarchy.
• Press Cursor s when you want to go back to the previous
hierarchy (except for the top hierarchy).
2.
Refer to “Resume” on page 10.
This unit recommends the files recorded under the following
circumstances:
Applicable MP3 file
Remarks
Sampling frequency:
For
MP3
file
recorded in Variable
44.1 kHz or 48 kHz
Bit Rate (VBR), the unit may not
Constant bit rate:
display the actual elapsed time.
32 kbps ~ 320 kbps
Hint
• Some selections may take a while to be recognized.
• Press TOP MENU to return to the 1st item.
• Press MENU or RETURN to go back to the opening display.
• Folders are known as Groups; files are known as Tracks.
• Folders and MP3 files are displayed respectively as and .
• A maximum of 255 folders or 999 files may be recognized in one disc.
• Up to 8 hierarchies can be recognized in one folder. Files in the
9th or deeper hierarchies cannot be played back.
• This unit can play back sounds from data recorded in MP3 format
on CD-RW/-R discs.
• A file with an extension of “.mp3 (MP3)” is called an “MP3 file”.
• The unit can run an image file conforming to the Exif specification.
Exif is a file format, Exchangeable Image File format established
by Japan Electronics and Information Technology Industries
Association (JEITA).
• Files whose extension is other than “.mp3 (MP3)” will not be listed
in the MP3 menu.
• If the file is not recorded in MP3 format, noise may be produced
even if the file extension is either “.mp3 (MP3)”.
• The name of group and track can be displayed in up to 25 characters. Unrecognisable characters will be replaced with asterisks.
• Unplayable groups or tracks may be displayed depending on the
recording conditions.
• If TOP MENU is pressed when a FILE LIST is displayed, the 1st item
will be highlighted.
ON-SCREEN DISPLAY
You can check the information about the current disc by pressing DISPLAY on the remote control.
Each time you press DISPLAY, On-Screen Display changes as examples below.
Current playback status
Angle icon, appears only when available on the DVD.
1
4/12 0:03:21 - 0:02:15
2
4/12 0:13:45 - 0:45:40
T
Remaining time of the current track
Elapsed time of the current track
T (Track):
Current track number / Total tracks
Current playback status
1
11/16 0:00:00 - 0:03:30
Remaining time of the current chapter
Elapsed time of the current chapter
FUNCTIONS
C (Chapter):
Current chapter number /
Total chapters
2
1/3
T
ALL:
Current track number / Total tracks
Current repeat setting appears only
when the repeat setting is active.
T : Track repeat
A : All tracks repeat
A B : A-B repeat
0:00:00 - 1:23:45
Remaining time of the current title
Elapsed time of the current title
Remaining time of the entire disc
T (Title):
Current title number / Total titles
Elapsed time of the entire disc
3
3
T
L1
Layer numbers, appears only when
playing a two-layered disc.
L0 : Layer 0 is playing
L1 : Layer 1 is playing
Hint
• When you are playing a disc in PROGRAM or RANDOM mode,
“
PROGRAM” (or “RANDOM”) will be displayed instead of 2 .
Current playback status
1
Current repeat setting appears only
when the repeat setting is active.
C : Chapter repeat
T : Title repeat
A B : A-B repeat
The name of the file currently in playback will be displayed.
2
BIT RATE: The amount of audio and
video data currently being read.
A
TRACK 01
T (Track):
Current track number / Total tracks
1/36 0:01:15
Current Repeat setting, if active
T : Track repeat
G : Group (folder) repeat
A : Disc repeat
Elapsed playing time of the current track
ORG
List status
ORG : Original is playing
PL : Playlist is playing
3
Current repeat setting appears only
when the repeat setting is active.
C : Chapter repeat
T : Title repeat
A B : A-B repeat
A : All repeat
PROGRAM
or
RANDOM
(Only when you are playing a disc in PROGRAM or
RANDOM mode.)
4
4
– 12 –
E61U1UD_2.indd 12
T
EN
8/8/2005 11:52:25 AM
SEARCH FUNCTION
Track Search
2.
/12
within 30 seconds.
Using SEARCH MODE
1.
/29
Using SKIP H / G
1.
Current Chapter
(C)
C1 C2 C3 C4
2.
within 30 seconds.
/29
SKIP H
Hint
• For the discs with less than 10 tracks, press the track number directly.
• +10 button can also bring up the Track Search display.
• For discs with 10 or more but less than 100 tracks, to play a singledigit track, press 0 first, then the track number (e.g. for track 3,
press 0, 3). To play a double-digit track, press the track number.
• For discs with 100 or more tracks, to play a single or a double-digit
track, press 0 first, then the track number (e.g. for track 3, press 0,
0, 3, and for track 26, press 0, 2, 6). To play a triple-digit track, press
the track number.
• SEARCH MODE dose not work during Programmed or Random
Playback.
G SKIP
or
Current Title
(T)
T1 T2 T3 T4
SKIP H
G SKIP
(If the disc has no chapters.)
Hint
• Depending on the disc being played, this function can also be
performed by directly entering the desired chapter number with
the Number buttons. Refer to the manual accompanying the
disc.
Time Search
Using SKIP H / G
Current Track
(T)
T1 T2 T3 T4
1.
SKIP H
1.
TOTAL
1:29:00
G SKIP
Hint
• SKIP H / G are not available when playback is stopped.
• Previous tracks cannot search at Random Playback by using SKIP H.
Press SEARCH MODE repeatedly until “
” appears.
2.
within 30 seconds.
TOTAL
1:29:00
Hint
• When there is no need to enter a number, “0” appears automatically. For example, “0: 0_ : _ _” appears in the Time Search display if
the total time of the title or track is less than 10 minutes.
• Press CLEAR to erase the incorrect input at step 2.
Using SEARCH MODE
1.
/12
Press SEARCH MODE once for the Chapter Search.
Press SEARCH MODE twice for the Title Search.
FUNCTIONS
Title / Chapter Search
MARKER SETUP
2.
or
This feature allows you to assign a specific point on a disc to be called
back later.
To set a marker
3.
1.
At the desired marker
• Playback will restart from the specific point which you set.
Press SEARCH MODE repeatedly until the Marker display appears.
2.
or
3.
To return to the marker later
1.
Press SEARCH MODE repeatedly until the Marker display appears.
To exit the Marker display
1.
Hint
• The Marker display will disappear in about 30 seconds when there
is no input.
• To clear a marker, select the marker to be cleared at step 2 in the
section “To set a marker” or “To return to the marker later”, and
then press CLEAR.
• Ejecting the disc or turning off the power will erase all markers.
• Selecting “AC” at step 2 in the section “To set a marker” or “To
return to the marker later” will also erase all markers.
• You can mark up to 10 points.
– 13 –
E61U1UD_2.indd 13
EN
8/8/2005 12:12:51 PM
REPEAT / RANDOM / PROGRAMMED PLAYBACK
Repeat Playback
Random Playback
Repeat function is available only during playback.
This function shuffles the playing order of tracks instead of playback in
the sequence.
1.
1.
RANDOM
CD-DA
RANDOM PROGRAM
--no indication--
Each time you press REPEAT, repeat function changes as examples below.
Press twice.
OFF
(repeat off)
CHAPTER
(current chapter repeat)
TITLE
(current title repeat)
OFF
(repeat off)
CHAPTER
(current chapter repeat)
TITLE
(current title repeat)
ALL
(entire disc repeat)
TOTAL 0:45:55
PLAY
2.
Hint
• To repeat the current track in the random selections, press
REPEAT repeatedly until “ TRACK” appears during playback.
• To repeat the entire random selections, press REPEAT repeatedly
until “ ALL” appears during playback.
Programmed Playback
You may determine the order in which tracks will play.
1.
PROGRAM
CD-DA
OFF
(repeat off)
Press once.
T
T
T
T
T
T
T
ENTER
TRACK
ALL
(entire disc repeat)
2.
FUNCTIONS
TRACK
(current track repeat)
GROUP
(current group repeat)
ALL
(entire disc repeat)
ENTER
Repeat A-B Playback
1.
A-
At your desired starting point (A)
2.
A-B
At your desired end point (B)
• Point B should be in the same title or track as point A.
Hint
• To exit the sequence, press A-B so that “OFF” appears.
• To cancel Point A, press CLEAR.
• This function does not work in the other repeat modes.
3/ 3
T 4
T 16
0:08:22
3:58
4:24
1/ 1
T 16 4:24
• Up to 99 tracks can be ordered.
• If 8 or more tracks were in a program, use SKIP H / G to
see all the tracks.
• While a MP3 folder is open:
– Press Cursor B when you want to go to the next hierarchy.
– Press Cursor s when you want to go back to the previous
hierarchy (except for the 1st hierarchy).
– Press TOP MENU when you want to go back to the 1st
hierarchy.
3.
Hint
• Press CLEAR at step 2 to erase the most recently entered track.
• To erase all programmed tracks at once, select “ALL CLEAR’’ and
press ENTER at step 2.
• While a program is being played back, STOP C works as follows:
- Press STOP C and PLAY B next, so that the programmed playback restarts. (CD playback restarts from the current point. MP3
playback restarts from the beginning of the current track.)
- Press STOP C twice and PLAY B next, so that playback restarts
from the first track in the original order. However, your programmed playback can be restarted when you follow the above
steps. (Your programs are still stored until either the disc is
ejected or power is turned off.) On some discs, STOP C will not
work while the Resume message appears. Please wait until the
message disappears.
• To repeat the current track in the program, press REPEAT repeatedly until “ TRACK’’ appears during playback.
• To repeat the entire program, press REPEAT repeatedly until
“ ALL’’ appears during playback.
– 14 –
E61U1UD_2.indd 14
TOTAL
T 15 3:18
T 16 4:24
ALL CLEAR
PLAY
CLEAR
Hint
• Repeat setting will be cleared when moving to another title, chapter, track or group.
• Repeat playback may not function with some discs or during
Repeat A-B Playback.
1/ 1
T 1 3:31
CD-DA
(repeat off)
0:00:00
PROGRAM
or
OFF
TOTAL
3:31
4:28
4:19
3:58
4:12
4:02
3:55
1/ 3
PLAY
CLEAR
(current track repeat)
1
2
3
4
5
6
7
EN
8/8/2005 11:52:38 AM
SPECIAL SETTINGS
Subtitle Language
This unit allows you to select a subtitle language (if available) during
DVD playback.
1.
1.ENG/6
Subtitles can be
varied on the
displayed number.
(no subtitles)
ENG
(English subtitles)
FRE
(French subtitles)
Current subtitles
language.
...
OFF
To Set Subtitle ON/OFF
Mode
1.
MAIN
1.ENG/6
SUB
2.
or press SUBTITLE
repeatedly until
“OFF” appears.
or
OFF
MAIN
SUB
AUDIO OUTPUT
L
Main Audio
R
Main Audio
L
Sub Audio
R
Sub Audio
L
Main Audio
R
Sub Audio
Display on the TV screen
MAIN
SUB
MAIN+
SUB
Camera Angles
Hint
• If your language is not shown after pressing SUBTITLE several
times, the disc may not have that language. However, some discs
allow you to change subtitle languages setting in the disc menu.
(Operation varies depending on the disc, so refer to the manual
included in the disc.)
• When “NOT AVAILABLE” appears on the TV screen, it means no
subtitle is recorded on the scene.
• If you choose a language that has 3-letter-language code, the
code will be displayed every time you change the subtitle language setting. If you choose any other languages, “---” will be
displayed instead. (Refer to page 19.)
Some DVD discs may contain scenes which have been
shot simultaneously from various angles. You can change
the camera angle if “ ” appears on the screen. If the
ANGLE ICON setting is “OFF” in the OTHERS menu,
“ ” will not appear. (Refer to pages 16, 19.)
1.
FUNCTIONS
Each time you press SUBTITLE,
subtitle language changes as example below.
Hint
• The sound mode cannot be changed during playback of discs not
recorded in double sound.
• Audio language selection cannot be made during Rapid Play.
(Refer to page 11.)
• If your language is not shown after pressing AUDIO several times,
the disc may not have that language. However, some discs allow
you to change multiple audio languages setting in the disc menu.
(Operation varies depending on the disc, so refer to the manual
included in the disc.)
• When “NOT AVAILABLE” appears on the TV screen, it means no
audio is recorded on the scene.
• If you choose a language that has 3-letter-language code, the
code will be displayed every time you change the audio language
setting. If you choose any other languages, “---” will be displayed
instead. (Refer to page 19.)
For VR mode only:
• Pressing AUDIO cycles the sound mode through MAIN, SUB, MAIN + SUB.
• DVD-RW discs recorded in double sound (2 languages) can be
played back in either sound mode of MAIN, SUB or MAIN + SUB.
• With discs recorded in VR mode, changing the audio (MAIN, SUB
or MAIN+SUB) is effective only when using an analog connection.
Although you may be able to change the settings of the on-screen
display, it will not affect the sound when using a digital connection.
1/8
Audio Language
Black Level Setting
This unit allows you to select an audio language (if multiple languages are available) during DVD playback.
Adjust the Black Level Setting to make the dark areas of the TV picture
brighter.
1.
1.
1.ENG
Each time you press AUDIO,
audio language changes as example below.
ENG
(English audio)
SPA
Audio can be
varied on the
displayed number.
Press MODE repeatedly until “
2.
or
or
Current audio
language.
” appears.
OFF
ON : Makes the dark areas brighter.
OFF : Shows the original picture as recorded.
(Spanish audio)
...
3.
FRE
(French audio)
– 15 –
E61U1UD_2.indd 15
ON
3/2.1ch 48k/3
EN
8/8/2005 1:27:43 PM
Stereo Sound Mode
Virtual Surround
This unit allows you to select a sound mode during CD playback.
You can enjoy stereophonic virtual world on your existing 2 channel
stereo system.
1.
STEREO
1.
Each time you press AUDIO, sound mode changes as example below.
STEREO
(Right and left channels are active.)
L-ch
(Left channel is active.)
R-ch
(Right channel is active.)
OFF
Press MODE repeatedly until “
2.
” appears.
or
1
or
1
: Natural effect.
2
: Emphasized effect.
OFF : No effects (original sound).
3.
Hint
• Virtual Surround cannot be changed when the sound mode is set
to either L-ch or R-ch.
• Stereo Sound Mode is not available on DTS CD.
Hint
• The setting will be kept even if the unit is turned off.
• On Audio CDs, Virtual Surround will not be effective if the sound
mode is set to something other than “STEREO”. Refer to “Stereo
Sound Mode”.
• Turn down the level or select “OFF” if the sound is distorted.
• This function cannot be used during Rapid Play.
DVD SETUP
QUICK SETUP Menu
You can select the “PLAYER MENU”, “TV ASPECT”, “PROGRESSIVE”, “DOLBY DIGITAL” or “DTS” from the QUICK SETUP menu quickly.
Select the desired item.
or
FUNCTIONS
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
DTS
QUICK SETUP
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
DTS
p.17 LANGUAGE Setting (Step 1)
QUICK SETUP
<SETUP MENU>
Confirm that “ (QUICK)” is highlighted.
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
OFF
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
OFF
p.17 DISPLAY Setting
(Step 1)
p.17 DISPLAY Setting
(Step 1)
p.18 AUDIO Setting
(Step 1)
p.18 AUDIO Setting
(Step 1)
ENTER
• Refer to the sections “PLAYER MENU”, “TV ASPECT” or “PROGRESSIVE” on page 17 and “DOLBY DIGITAL” or “DTS” on page 18.
CUSTOM Menu
You can change the settings of the unit.
• QUICK on pages 17, 18 indicates DVD Setup menus also accessible from the QUICK SETUP menu.
or
or
Select
“ (CUSTOM)”.
<SETUP MENU>
QUICK SETUP
QUICK SETUP
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
DTS
To decide.
To select the desired item.
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
DTS
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
OFF
LANGUAGE
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
OFF
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ENTER
ENTER
ORIGINAL
OFF
ENGLISH
ENGLISH
ENTER
LANGUAGE menu
DISPLAY menu
TV ASPECT
STILL MODE
PROGRESSIVE
ORIGINAL
OFF
ENGLISH
ENGLISH
PARENTAL menu
AUDIO
DISPLAY
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
AUDIO menu
ENTER
OTHERS
PARENTAL
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
DTS
OFF
4:3 LETTER BOX
AUTO
OFF
OTHERS menu
ENTER
ANGLE ICON
ON
AUTO POWER OFF ON
PARENTAL LEVEL ALL
ENTER
ENTER
ENTER
LANGUAGE Setting (p.17)
DISPLAY Setting (p.17)
AUDIO Setting (p.18)
– 16 –
E61U1UD_2.indd 16
PARENTAL Setting (p.18)
OTHERS Setting (p.19)
EN
8/8/2005 11:52:51 AM
LANGUAGE Setting
DISPLAY Setting
Follow the steps in the “CUSTOM Menu” on page 16.
You can change the display functions. Follow the steps in the
“CUSTOM Menu” on page 16.
1. Select the desired item.
1. Select the desired item.
LANGUAGE
or
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ORIGINAL
OFF
ENGLISH
ENGLISH
or
DISPLAY
TV ASPECT
STILL MODE
PROGRESSIVE
ENTER
LANGUAGE menu
4:3 LETTER BOX
AUTO
OFF
ENTER
DISPLAY menu
AUDIO: ✽1 ✽2
(Default: ORIGINAL)
Sets the audio language.
AUDIO
ORIGINAL
ENGLISH
FRENCH
SUBTITLE: ✽1 ✽2
(Default: OFF)
Sets the subtitle language.
SUBTITLE
OFF
ENGLISH
FRENCH
DISC MENU: ✽1
(Default: ENGLISH)
Sets the language in DVD
menu.
PLAYER MENU: QUICK
(Default: ENGLISH)
Sets the language for the
On-Screen Display.
DISC MENU
ENGLISH
FRENCH
SPANISH
TV ASPECT: QUICK
(Default: 4:3 LETTER BOX)
See hint below.
TV ASPECT
STILL MODE
PROGRESSIVE
4:3 LETTERBOX
AUTO
OFF
Select the
desired
setting.
TV ASPECT
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
STILL MODE:
(Default: AUTO)
See hint below.
TV ASPECT
STILL MODE
PROGRESSIVE
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
4:3 LETTERBOX
AUTO
OFF
PROGRESSIVE:
(Default: OFF)
See hint below.
2. Select the desired language.
TV ASPECT
STILL MODE
PROGRESSIVE
or
or
Select the
desired
setting.
STILL MODE
AUTO
FIELD
FRAME
or
QUICK
4:3 LETTERBOX
AUTO
OFF
3. To exit the menu.
4:3 LETTERBOX
AUTO
ON
Select
YES.
"EFOREPROCEEDINGx
./4% )FTHEREISNOPICTUREORPICTUREISDISTORTED
AFTERSELECTINGh9%3v
7AITABOUTSECONDSFORAUTORECOVERY
!CTIVATE0ROGRESSIVE
./
9%3
3%,%#4,-3%4/+
Hint
✽1
• Language options are not available with some discs.
• If “OTHER” is selected in the AUDIO, SUBTITLE or DISC MENU
screen, press four-digit number to enter the code for the desired
language. (Refer to “LANGUAGE LIST” on page 19.)
• Only the languages supported by the disc can be selected.
✽2
• Language Setting for Audio and Subtitle are not available with
some discs. Then use AUDIO and SUBTITLE. Details are on page
15.
Select
YES.
#ONFIRMAGAINTOUSEPROGRESSIVESCAN
)F0ICTUREISGOOD3ELECTh9%3v
FUNCTIONS
-AKESUREYOUR46HASPROGRESSIVESCAN
#ONNECTWITHCOMPONENTVIDEOCABLE
or
or
./
9%3
3%,%#4,-3%4%.4%2
2. To confirm the PROGRESSIVE.
• The PROGRESSIVE indicator
on the front panel lights on.
To exit the TV ASPECT or
STILL MODE screen.
Hint
TV ASPECT:
• Select “4:3 LETTER BOX”, so that black bars may appear on the top
and bottom of the screen.
• Select “4:3 PAN & SCAN” for a full height picture with both sides adjusted.
• Select “16:9 WIDE” if a wide-screen TV is connected to this unit.
STILL MODE:
• Select “AUTO” usually.
• If you select “FIELD”, the picture in the still mode will be stabilized.
• If you select “FRAME”, the picture in the still mode will be highly defined.
PROGRESSIVE:
• You can set “PROGRESSIVE” to “OFF” either in the DISPLAY menu or
by pressing and holding PLAY B on the front of the unit for more
than 5 seconds, so that the PROGRESSIVE indicator on the front
panel lights off.
• When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO
OUT and S-VIDEO OUT jacks will be distorted or not be output at
all.
– 17 –
E61U1UD_2.indd 17
EN
8/8/2005 11:52:58 AM
AUDIO Setting
1. Enter your desired four-digit password (except for 4737).
PARENTAL menu
Choose the appropriate audio settings for your equipments. It only
affects during the playback of DVD discs. Follow the steps in the
“CUSTOM Menu” on page 16.
PARENTAL
PASSWORD
Please enter a 4-digit password.
1. Select the desired item.
ENTER
or
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
PASSWORD
Please enter a 4-digit password.
ON
ON
BITSTREAM
OFF
ENTER
AUDIO menu
Don’t forget the password.
Press ‘ENTER’ to activate password.
DRC (Dynamic Range Control): (Default: ON)
Set to “ON” to compress the range between soft and loud
sounds.
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
ON
ON
BITSTREAM
OFF
If you have set a password already,
enter the current four-digit password.
PARENTAL
Enter current password.
ENTER
OFF
ON
BITSTREAM
2. Select “PARENTAL LEVEL”.
OFF
PARENTAL LEVEL
PASSWORD CHANGE
ALL
or
DOWN SAMPLING: (Default: ON)
Set to “ON” when outputting in 48 kHz.
Set to “OFF” when outputting the original sound.
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
ON
ON
BITSTREAM
OFF
3. Select the desired level.
or
ON
OFF
BITSTREAM
OFF
4. To exit the menu.
DOLBY DIGITAL: QUICK (Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby
Digital receiver.
• BITSTREAM: Outputs a Dolby Digital Signals.
• DPCM: Convert the Dolby Digital into DPCM (2 channel).
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
ON
ON
BITSTREAM
OFF
FUNCTIONS
CONTROL LEVELS
• ALL:
All parental locks are cancelled.
• Level 8:
DVD softwares of any grades (adult/general/children) can be played back.
• Levels 7 to 2:
Only DVD softwares intended for general use and children can be
played back.
• Level 1:
Only DVD softwares intended for children can be played back, with
those intended for adult and general use prohibited.
ON
ON
DPCM
OFF
DTS: QUICK (Default: OFF)
Set to “BITSTREAM” when the unit is connected to DTS
decoder.
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
ON
ON
BITSTREAM
OFF
PARENTAL LEVEL
ALL
8
7
6
Hint
• DVD-Video discs may not respond to the parental lock settings.
Make sure this function works with your DVD-Video discs.
ON
ON
BITSTREAM
BITSTREAM
To Change the Password for Parental Controls
You can change your password for parental controls. Follow the steps
in the “CUSTOM Menu” on page 16.
1. Enter your four-digit password.
PARENTAL menu
2. To exit the menu.
PARENTAL
Hint
DRC:
• This function is available only to the discs which are recorded in
the Dolby Digital format.
DOWN SAMPLING:
• When playing back a 96 kHz disc with the copyright protection
or when Virtual Surround is set to 1 or 2, the sound will be down
sampled at 48 kHz and output as digital audio even if the “DOWN
SAMPLING” is set to “OFF”.
• This function is available only on digital outputting of a disc
recorded in 96 kHz.
Enter current password.
ENTER
2. Select “PASSWORD CHANGE”.
or
PASSWORD
Please enter a 4-digit password.
4. To exit the menu.
Parental Control limits the disc viewing that exceed your settings. (An
incorrect password will not play.)
This feature prevents your children from viewing inappropriate materials.
Hint
• Record the password in case you forget it.
• If you forget the password, press 4, 7, 3, 7 at step 1, then enter
your new password.
• Password will be cleared and parental levels will be set to “ALL”.
– 18 –
E61U1UD_2.indd 18
ALL
3. Enter your new four-digit password (except for 4737).
PARENTAL Setting
Parental Levels
Parental Level allows you to set the rating levels of your DVD discs.
Playback will stop if the ratings exceed the levels you set. Follow the
steps in the “CUSTOM Menu” on page 16.
PARENTAL LEVEL
PASSWORD CHANGE
EN
8/8/2005 11:53:05 AM
OTHERS Setting
You can change the other functions. Follow the steps in the “CUSTOM
Menu” on page 16.
1. Select the desired item.
Reset to the Default Setting
(except for PARENTAL Setting)
1. Select the desired item.
OTHERS menu
SETUP menu
QUICK SETUP
or
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
DTS
OTHERS
ANGLE ICON
ON
AUTO POWER OFF ON
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
OFF
ENTER
ENTER
2. Select “ (INITIALIZE)”.
ANGLE ICON: (Default: ON)
Set to “ON” to show the angle icon when multiple
camera angles are available during DVD playback.
ANGLE ICON
AUTO POWER OFF
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
DTS
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
OFF
ENTER
OFF
ON
ON
ON
QUICK SETUP
or
3. Select “YES”.
INITIALIZE
AUTO POWER OFF: (Default: ON)
Set to “ON” to turn this unit off automatically after
30 minutes of no use.
ANGLE ICON
AUTO POWER OFF
or
Press twice.
ON
OFF
ON
ON
Initialize?
NO
YES
ENTER
4. To exit the menu.
2. To exit the menu.
Hint
• When you cancel to initialize at step 3, select “NO”.
INFORMATION
LANGUAGE LIST
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
Language
French [FRE]
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
Code
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
Language
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian [NOR]
O-R
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Code
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
Language
Siswat
Slovak
Slovenian
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
6565
6557
6558
6561
5165
6567
6569
6568
FUNCTIONS
A-B
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
F-H
Faroese
Fiji
Finnish [FIN]
Code
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
INFORMATION
Language
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
If you choose a language that has a 3 letter language code, the code will be displayed every time you change the Audio or Subtitle Language
setting on page 15. If you choose any other languages, “---” will be displayed instead. (3 letter language code is written in bracket.)
– 19 –
E61U1UD_2.indd 19
EN
8/8/2005 11:53:12 AM
SPECIFICATIONS
PRODUCT TYPE
DVD Video Player
DISCS PLAYBACK COMPATIBILITY
DVD-Video / DVD-RW/-R / DVD+RW/+R / Audio CD / CD-RW/-R
FREQUENCY RESPONSE
DVD (linear sound) :
20 Hz to 22 kHz (sample rate: 48 kHz)
20 Hz to 44 kHz (sample rate: 96 kHz)
CD :
20 Hz to 20 kHz
SIGNALTONOISE RATIO S/N RATIO
CD :
120 dB (JEITA)
DYNAMIC RANGE
DVD (linear sound) :
102 dB
CD :
99 dB (JEITA)
TOTAL DISTORTION FACTOR
DVD :
1 KHz
0.0045% (JEITA)
CD :
1 KHz
0.0035% (JEITA)
WOW AND FLUTTER
Below the measurement limitation (+/-0.001% W PEAK) (JEITA)
• Designs and specifications are subject to change without notice.
CONNECTIONS
Video output
Component video output
S-video output
Analog audio output
One RCA connector, 1 Vpp (75 Ω)
One pin jack (Y), 1 Vpp (75 Ω)
Two pin jacks (CR/PR, CB/PB),
700 mVpp (75 Ω)
Mini DIN 4-pin jack (75 Ω)
Two RCA connectors
(one left channel, one right channel)
2 Vrms (47 kΩ)
One pin jack, 500 mVpp (75 Ω)
Coaxial digital audio output
POWER SOURCE
120 V ~ +/- 10%, 60 Hz +/- 0.5%
POWER CONSUMPTION
10 W (standby: 0.8 W)
OPERATING TEMPERATURE
41 F° to 104 F° (5 °C to 40 °C)
DIMENSIONS
W: 2.5 inch (62 mm) H: 9.8 inch (248.5 mm) D: 9.4 inch (238 mm)
WEIGHT
Approx 2.9 lbs. (1.3 kg)
TROUBLESHOOTING GUIDE
If this unit does not perform properly when operated as instructed in this Operation Manual, check this unit consulting the following checklist.
PROBLEM
No power.
The unit turns off suddenly.
This unit does not respond to the remote
control.
No picture.
Disc cannot be played.
No sound.
INFORMATION
No DTS audio is output.
Distorted picture.
Audio or subtitle language does not
match the set up.
The camera angle cannot be changed.
Audio or subtitle language cannot be
changed.
“Prohibited icon” appears on the screen,
prohibiting an operation.
CORRECTIVE ACTION
• Make sure the power plug is connected to an AC outlet.
• Make sure the power is turned on.
• Check if the “AUTO POWER OFF” is set to “OFF”.
• Check if the power plug is connected to an AC outlet.
• Check the batteries in the remote control.
• Aim the remote control directly at the remote sensor. If necessary, remove all the obstacles
between the sensor and the remote.
• You have to be within 23 feet (7 m) of this unit.
• Connect the video cable firmly.
• Insert a correct video disc that plays on this unit.
• Insert the disc.
• Clean the disc.
• Insert the disc correctly with the label facing to the left when the unit is installed vertically.
• Insert the disc correctly with the label facing up when the unit is installed horizontally.
• Cancel the parental lock or change the control levels.
• Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.
• If the recorded portion of the disc is too small (less than 2 3/16 inches (55 mm)), it may not play
back properly.
• Connect the audio cable firmly.
• Turn the power of the audio component on.
• Correct the audio output settings.
• Correct the input settings on the audio component.
• Use a DIGITAL AUDIO OUT jack when outputting the DTS audio.
• Connect this unit directly to the TV.
• There are some cases where picture may be slightly distorted, and those are not a sign of a malfunction.
• During the playback of a 2-layered disc, pictures may stop for a moment. This happens while the
1st layer is being switched to the 2nd layer. This is not a malfunction.
• Check if the INTERLACE/PROGRESSIVE mode is set correctly according to your TV. See page 8.
• This happens right after fast forwarding or rewinding. This is not a malfunction.
• The selected language is not available for audio or subtitles on the DVD.
This is not a malfunction.
• The DVD does not contain sequences recorded from different camera angles.
This is not a malfunction.
• The DVD does not contain audio source or subtitles in the selected language.
This is not a malfunction.
• That operation is prohibited by this unit or the disc. This is not a malfunction.
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Operation Manual for details on correct operations.
• Playback from a desired track and random playback are not available during programmed playback.
• Some functions are prohibited on some discs.
SERVICE INFORMATION (FOR THE U.S.)
For the location of the nearest SHARP Authorized Service Center, or to obtain product literature, accessories, supplies or customer assistance,
please call 1-800-BE-SHARP (1-800-237-4277) or visit SHARP’s website (http://www.sharpusa.com).
– 20 –
E61U1UD_2.indd 20
EN
8/8/2005 11:53:16 AM
ESPAÑOL
Para uso del cliente:
Para futura referencia, anote los números de modelo y de
serie (indicados en la parte posterior esta unidad) en el espacio provisto.
AVISO:
Nº de modelo:
________DV-MX1U________
Nº de serie:
________________________
PARA REDUCIR EL RIESGO DE INCENDIO O ELECTROCHOQUE NO
EXPONGA ESTE APARATO A LA HUMEDAD.
PRECAUCIÓN: PARA EVITAR DESCARGAS ELÉCTRICAS, HAGA QUE LA PALETA ANCHA
DEL ENCHUFE COINCIDA CON LA RANURA ANCHA E INTRODÚZCALA
HASTA EL FONDO.
PRECAUCION
Este símbolo previene al usuario del voltaje
aislado dentro de la unidad que puede provocar descargas eléctricas peligrosas.
PELIGRO DE DESCARGA ELECTRICA NO
ABRIR DECLARACIÓN DE CONFORMIDAD
PRECAUCION:
TPARA REDUCIR EL RIESGO DE DESCARGA ELECTRICA, NO
QUITE LA CUBIERTA. EL USUARIO NO DEBERA DAR NINGUN
TIPO DE SERVICIO A NINGUNA PARTE INTERNA. DEBERA SER
REALIZADO SOLO POR PERSONAL DE SERVICIO CALIFICADO.
Este símbolo advierte al usuario que existen
instrucciones de operación y de mantenimiento en la literatura incluida en esta
unidad.
“ADVERTENCIA—Las reglas de la FCC (Comisión Federal de Comunicaciones) estipulan
que cualquier modificación o cambio a este equipo no aprobado expresamente por el
fabricante podrá anular la autorización del usuario para operar este equipo”.
Este dispositivo cumple con la Parte 15 de las reglas de la FCC (Comisión Federal de Comunicaciones). La operación se encuentra sujeta a las dos condiciones siguientes:
(1) Este dispositivo no debería producir interferencias perjudiciales, y
(2) este dispositivo debe aceptar cualquier interferencia recibida, incluyendo las que puedan producir una operación indeseable.
INFORMACION
Este equipo se ha sometido a todo tipo de pruebas y cumple con las normas establecidas para dispositivo digital de Clase B, de
conformidad con la Parte 15 de las reglas de la FCC (Comisión Federal de Comunicaciones). Estas reglas están diseñadas para
asegurar una protección razonable contra interferencias perjudiciales en las instalaciones residenciales. Este equipo genera,
utiliza y puede emitir energía de radiofrecuencia y, si no se instala y utiliza debidamente, es decir, conforme a las instrucciones,
podrían producirse interferencias perjudiciales en las radiocomunicaciones. Sin embargo, no se garantiza que estas interferencias no se produzcan en una instalación determinada. Si este equipo ocasiona interferencias en la recepción de radio o
televisión, lo cual puede comprobarse con sólo apagar y encender el equipo, intente corregir el problema mediante una o una
combinación de las siguientes medidas:
—Reoriente la antena receptora o cámbiela de lugar.
—Aumente la separación entre el equipo y el receptor.
—Enchufe el equipo a una toma de corriente situada en un circuito distinto del receptor.
—Consulte a su distribuidor o a un técnico experto en radio/televisión.
ESPAÑOL
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Este aparato digital de la Clase B cumple con la norma ICES-003 de Canadá.
PRECAUCION:
ESTA UNIDAD HA SIDO CLASIFICADA COMO PRODUCTO CLASS 1 LASER.
EL USO DE MANDOS O AJUSTES O LA REALIZACION DE PROCEDIMIENTOS DISTINTOS DE LOS INDICADOS EN LA PRESENTE
IMPLICA EL RIESGO DE EXPOSICION A UNA RADIACION PELIGROSA.
COMO LOS RAYOS LASER UTILIZADOS EN ESTA UNIDAD PUEDEN RESULTAR PERJUDICIALES PARA SUS OJOS, NO INTENTE
DESARMAR EL GABINETE. SOLICITE EL SERVICIO UNICAMENTE A PERSONAL CUALIFICADO.
Los productos que han ganado la marca ENERGY STAR® han sido diseñados para proteger el medio ambiente mediante una eficiencia superior en el uso de la energía.
– 21 –
E61U1UD_2.indd 21
SP
8/8/2005 11:53:17 AM
IMPORTANTES MEDIDAS DE SEGURIDAD Y PRECAUCIONES
ESPAÑOL
1) Lea las instrucciones - Lea detenidamente todas las instrucciones de seguridad y operación antes de usar el producto.
2) Conserve las instrucciones - Conserve las instrucciones de
seguridad y operación para consultas futuras.
3) Respete las advertencias - Observe estrictamente todas las
advertencias impresas en el producto y las incluidas en el
manual de instrucciones.
4) Siga las instrucciones - Siga todas las instrucciones de operación.
5) Limpieza - Desconecte el producto del tomacorriente mural
antes de limpiarlo. No use limpiadores líquidos ni aerosol. Use
un paño húmedo para la limpieza del producto.
6) Enchufes - No use enchfes no recomendados por el fabricante del producto, ya que podría ser peligroso.
7) Agua y humedad - No use este producto cerca del agua, por
ejemplo, cerca de una bañera o lavamanos, cerca del fregadero de la cocina o lavandería, en un piso mojado, cerca de una
piscina, etc.
ADVERTENCIA SOBRE EL USO
8) Accesorios - No instale este proDE CARROS PORTÁTILES
ducto en un carro, soporte, trípode o mesa inestables. El grabador de videocassettes podría
caerse, causando serias lesiones a
un niño o adulto, resultando también severamente dañado. Uselo
sólo el un carro, soporte, trípode
S3125A
o mesa recomendados por el fabricante, o vendidos con el producto. Toda instalación del producto deberán hacerse de acuerdo a las instrucciones del fabricante, empleando los accesorios de instalación recomendados por el mismo.
9) La combinación de producto y carro debe ser movida con
cuidado. Las detenciones bruscas, la fuerza excesiva y las
superficies disparejas podrán hacer que el producto y el carro
se vuelquen.
10) Ventilación - El gabinete del producto tiene renuras y aberturas de ventilación que garantizan el funcionamiento confiable del producto, evitando que se recaliente. Estas aberturas
no deberán ser bloquear las aberturas, nunca setúe el grabador de videocassettes encima de una cama, sofá, alfombra u
otra superficie similar. El grabador de videocassettes no debe
ser instalado en un mueble emportado, como una repisa para
libros o bastidor, a menos que se pueda garantizar una ventilación adecuada, o cuando las instrucciones del fabricante así
lo especifiquen.
11) Alimentación - Este grabador de videocassettes sólo debe ser
operado mediante el tipo de fuente de alimentación especificado en la etiqueta indicadora. Si no seta seturo del tipo de
fuente de alimentación que tiene en su casa, consulte a su
distribuidor o a la compañía de electricidad local En el caso
de grabador de doseñados para funcionar a pilas o con otras
fuentes de alimentación, consulte el manuel de instrucciones
respectivo.
12) Conexión a tierra o polarización - Este producto está equipado con una clavija polarizada de corriente alterna (una clavija
que tiene una espiga más ancha que la otra). Esta clavija solamente pordá ser insertada en el tomacorriente en una sola
dirección. Esta es una medida de seguridad. Si no puediera
insertar completamente la clavija en el tomacorriente, vuelva a intentarlo invirtiendo la clavija. Si aún no fuera posible
insertar la clavija, tome contacto con un electricista para que
repare su tomacorriente obsoleto . No modifique las características de seguridad de la clavija polarizada.
13) Protección del cable de alimentación - Los cables de alimentación deberán ser tendidos de manera tal que la probabilidad
de que sean pisados o aplastados por otros objetos sea mínima. Preste especial atención a las clavijas de los cables, a los
receptáculos, y al punto por donde salen del producto.
14) Tormentas eléctricas - Como medida adicional de protección durante tormentas eléctricas, o cuando el producto permanezca sin uso durante períodos prolongados de tiempo,
desconéctelo del tomoacorriente mural y desconecte la antena o sistema de cable. Esto evitará que el grabador de videocassettes resulte dañado por tormentas eléctricas o sobretensiones en la línea de alimentación.
15) Líneas de alimentación - Un antena exterior no debe ser
instalada en la cercanía de líneas de alimentación aéreas ni
de otros circuitos de potencial para iluminación eléctrica, o
donde pueda caerse y hacer contacto con tales líneas o circuitos. Al instalar un sistema de antena exterior, enta mucho cuidado de no tocar tales líneas o circuitos de alimentación, ya
que el contacto con ellos podría será fatal.
16) Sobrecarga - No sobrecargue los tomacorrientes murales ni
los cables de extensión, ya que esto podría causar incendios o
descargas eléctricas.
17) Entrada de objetos y líquidos - Nunca introduzca objetos de
ningún tipo por las aberturas de sete producto, ya que pordría tocar peligrosos puntos de alta tensión o cortocircuitar
partes, provocando incendios o descargas elécticas. Nunca
derrame ningún tipo de líquido sobre el producto.
18) Servicio - No intente reparar el producto usted mismo; al abrir
o desmontar las cobiertas usted se expondrá a alta tensión y
a otros peligros. Solicite todo servicio a personal calificado.
19) Daños que requieran reparación - En los siguientes casos,
desconecte el producto del tomacorriente mural y llame a un
técnico de servicio calificado:
a) Cuando el cable de alimentación o la clavija estén dañados,
b) Si se ha derramado líquido sobre la unidad, o si algún objeto ha caído dentro del producto,
c) Si el producto ha sido expuesto a la lluvia o al agua,
d) Cuando a pesar de haber sebuido las instrucciones de
operación, el producto no funcione normalmente. Ajuste
solamente los controles mencionados en el manual de
instrucciones; el ajuste incorrecto de otros controles podrá
causar daños a la unidad, la que por lo general requerirá de
un prolongado trabajo de reparación (por un técnico calificado) para que sus condiciones normales de operación
puedan ser restablecidas,
e) Si el producto se ha caído o si el gabinete se ha dañado.
f ) Cuando el producto muestre un cambio notorio en su rendimiento.
20) Piezas de requesto - Cuando sea necesario reemplazar piezas,
asegúrese de que el técnico de servicio emplee las piezas de
requesto especificadas por el fabricante, o piezas que tengan
las mismas características que las piezas originales. Las sustituciones no autorizadas podrán causar incendios, descargas
eléctricas y otoros problemas.
21) Revisión de seguridad - Al finalizar cualquier servicio de mantenimiento o reparación de este producto, solicítele al técnico
que efectúe comprobaciones de seguridad para determinar
si el producto se encuentra o no en condiciones óptimas de
operación.
22) Calor - Este producto debe colocarse fuera del alcance de
fuentes de calor tales como radiadores, rejillas de calefacción,
estufas o cualquier otro producto destinado a producir calor,
incluyendo los amplificadores.
– 22 –
E61U1UD_2.indd 22
SP
8/8/2005 11:53:18 AM
Conexiones
Reproducción
Si su televisor tlene entradas de AUDIO/
VIDEO vea la sección “Connection to a TV”
en la página 8 en el Manual de Manejo, En
caso contrario, vea la sección “RF Modulator
Connection” en la página 8 en el Manual de
Manejo.
Antes:
Encienda el televisor, amplificador y
otros equipos conectados a esta uni1.
dad. Asegúrese que el televisor y el
sintonizador de audio (de venta en los
comercios) están en el canal correcto.
1
POWER
SEARCH
MODE
EJECT
1
2
3
4
5
7
8
9
0
+10
DISPLAY
2. Ponga un disco con la
etiquetahacia izquierda.
LABEL-SIDE
AUDIO
SUB
TITLE
Instalación de las pilas en el mando a
distancia
6
ANGLE
REPEAT
A-B
PAUSE
REV
reproducción.
SKIP
PLAY
4
3. Para empezar la
CLEAR
FWD
4. Para parar la reproducción.
3
STOP
SETUP
TOP MENU
MENU
Mando a distancia
Tipo de disco
Botón
(Orden alfabético)
Para cambiar el idioma en la pantalla
• Para seleccionar directamente el capítulo o título.
• Para seleccionar directamente la
canción.
• Para mover el cursor y determinar la
posición.
• Para mover el cursor y determinar la
posición.
1.
%.4%2
• Para repetir entre su punto A y B selec- • Para repetir entre su punto A y B seleccionado.
cionado. (CD)
• Para cambiar el ángulo de la cámara
de modo de ver la misma secuencia
—
reproducida desde un ángulo diferente. (DVD-Video)
• Para seleccionar un idioma para el audio • Para seleccionar un modo de sonido
o un modo de sonido deseados.
deseado. (CD)
• Para borrar los marcadores. (CD)
• Para borrar los marcadores.
• Para eliminar el Nº de estado en la
• Para borrar los números mal entrados.
entrada de programa.
• Para borrar el punto para la repetición • Para borrar los números mal entrados.
• Para borrar el punto para la repetición
A-B.
A-B. (CD)
QUICK SETUP
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
OFF
ENTER
Confirme que ha seleccionado “
(QUICK)”.
2.
3.
Confirme que ha seleccionado
“PLAYER MENU”.
QUICK SETUP
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
DTS
4.
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
OFF
2%6
&7$
Seleccione el idioma deseado para las
indicaciones en la pantalla.
o
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
0,!9
5.
Para salir del menú.
• Para mostrar el modo de disco actual.
• Para mostrar el modo de disco actual.
• Para expulsar el disco.
• Para expulsar el disco.
• Para buscar en avance/retroceso por
un disco.
• Para empezar la reproducción en
avance lento/retroceso durante el
modo de pausa.
• Para buscar en avance/retroceso por
un disco.
• Para llamar el Menú en un disco.
• Para llamar la lista de archivo. (MP3)
• Para desactivar/x1.3/x0.8 el reproducción rápído.
• Para activar/desactivar el nivel del negro.
• Para activar/desactivar el ambiental virtual.
• Para hacer una pausa en la reproducción.
• Para avanzar la reproducción un
cuadro cada vez.
• Para empezar la reproducción del
disco.
• Para disponer el orden de reproducción
o la reproducción aleatoria.
• Para activar/desactivar el ambiental virtual.
• Para activar o desactivar la unidad.
• Para activar o desactivar la unidad.
• Para empezar la reproducción del
disco.
• Para reproducir repetidamente una
• Para reproducir repetidamente un capí- cancióno disco. (CD)
tulo o título.
• Para reproducir repetidamente
una canción, grupo o disco. (MP3)
3+)0
34/0
• Para volver a la operación anterior.
• Para volver a la operación anterior.
• Para buscar un capítulo, título u hora.
• Para volver rápidamente a un lugar o
disco.
• Buscar los marcadores.
• Para ingresar al modo de configuración
o para cambiar las configuración de los
elementos.
•
•
•
•
•
• Para saltar capítulos o títulos.
• Para saltar canciones.
• Para parar la reproducción.
• Para parar la reproducción.
Para buscar una canción.
Para buscar la hora. (CD)
Para volver rápidamente a un lugar o disco.
Buscar los marcadores. (CD)
Para ingresar al modo de configuración
o para cambiar las configuración de los
elementos.
• Para seleccionar subtítulos en un disco.
—
• Para llamar el menú inicial en un disco.
(DVD-Video)
• Para volver al archivo superior de la
jerarquía más alta en el programa y en
la lista de archivo. (MP3)
• Para ampliar una parte de la
imagen(x2/x4).
– 23 –
E61U1UD_2.indd 23
• Para hacer una pausa en la reproducción del disco.
ESPAÑOL
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
DTS
—
SP
8/8/2005 11:53:18 AM
CONSUMER LIMITED WARRANTY
(Valid for warranty service in the U.S. only)
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it
will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured
equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below
nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or
other misuse, abnormal service or handling, or which has been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide
proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL
IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE
LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow
limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those
described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and
exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described
herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.
In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused
by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any
way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion of
incidental or consequential damages, so the above exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE.
Model Specific Section
Your Product Model Number & Description: DV-MX1U DVD Video Player
(Be sure to have this information available when you need service for
your Product.)
Warranty Period for this Product:
One (1) year parts and ninety (90) days labor from date of purchase.
Additional Item(s) Excluded from warranty
Coverage (if any):
Non-rechargeable batteries.
Where to Obtain Service:
Call Sharp Electronics corporation toll free at 1-800-BE-SHARP for
instructions on how to obtain service on your DVD player.
What to do to Obtain Service:
Ship your product, prepaid, as per the instruction given by the Sharp
representative at the toll free number (1-800-BE-SHARP). BE sure to
have your proof of purchase available. Be sure to ship the product
securely packaged and insured against shipping damage.
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, GO TO OUR WEBSITE AT www.sharpusa.com OR
CALL 1-800-BE-SHARP.
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
9HS1VMN21486
E61U1UD*****
1VMN21486
E61U1UD_2.indd 24
SHARP CORPORATION
Osaka, Japan
Printed in China
8/8/2005 11:53:26 AM