U
DESKTOP AUDIO SYSTEM
SYSTEME AUDIO DESKTOP
TSX-140
OWNER’S MANUAL
MODE D’EMPLOI
MANUAL DE INSTRUCCIONES
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK DO
NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
1
2
3
4
5
6
7
8
9
• Explanation of Graphical Symbols
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert you to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert you to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
10
11
12
IMPORTANT
Please record the serial number of this unit in the space
below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit. Retain
this Owner’s Manual in a safe place for future reference.
13
14
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of
the obsolete outlet.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or
when unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
We Want You Listening For A Lifetime
Yamaha and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out
of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without
annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing. Since hearing
damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic Industries
Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive
volume levels.
i En
English
FCC INFORMATION (for US customers)
1 IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved
by Yamaha may void your authority, granted by the
FCC, to use the product.
2 IMPORTANT: When connecting this product to
accessories and/or another product use only high
quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation
instructions. Failure to follow instructions could void
your FCC authorization to use this product in the
USA.
3 NOTE: This product has been tested and found to
comply with the requirements listed in FCC
Regulations, Part 15 for Class “B” digital devices.
Compliance with these requirements provides a
reasonable level of assurance that your use of this
product in a residential environment will not result in
harmful interference with other electronic devices.
This equipment generates/uses radio frequencies and,
if not installed and used according to the instructions
found in the users manual, may cause interference
harmful to the operation of other electronic devices.
Compliance with FCC regulations does not guarantee
that interference will not occur in all installations. If
this product is found to be the source of interference,
which can be determined by turning the unit “OFF”
and “ON”, please try to eliminate the problem by
using one of the following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch
(circuit breaker or fuse) circuits or install AC line
filter/s.
In the case of radio or TV interference, relocate/
reorient the antenna. If the antenna lead-in is 300 ohm
ribbon lead, change the lead-in to coaxial type cable.
If these corrective measures do not produce
satisfactory results, please contact the local retailer
authorized to distribute this type of product. If you can
not locate the appropriate retailer, please contact
Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe
Ave., Buena Park, CA 90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
FCC WARNING
Change or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
FOR CANADIAN CUSTOMERS
This Class B digital apparatus complies with Canadian
ICES-003.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
ii En
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
Install this unit in a well ventilated, cool, dry, clean
place - away from direct sunlight, heat sources,
vibration, dust, moisture and cold. For proper
ventilation, allow the following minimum clearances.
Top: 15 cm (6 in)
Rear: 10 cm (4 in)
Sides: 10 cm (4 in)
Locate this unit away from other electrical
appliances, motors, or transformers to avoid
humming sounds.
Do not expose this unit to sudden temperature
changes from cold to hot, and do not locate this unit
in an environment with high humidity (i.e. a room
with a humidifier) to prevent condensation inside this
unit, which may cause an electrical shock, fire,
damage to this unit, and/or personal injury.
Avoid installing this unit where foreign object may
fall onto this unit and/or this unit may be exposed to
liquid dripping or splashing. On the top of this unit,
do not place:
– Other components, as they may cause damage
and/or discoloration on the surface of this unit.
– Burning objects (i.e. candles), as they may cause
fire, damage to this unit, and/or personal injury.
– Containers with liquid in them, as they may fall
and liquid may cause electrical shock to the user
and/or damage to this unit.
Do not cover this unit with a newspaper, tablecloth,
curtain, etc. in order not to obstruct heat radiation. If
the temperature inside this unit rises, it may cause
fire, damage to this unit, and/or personal injury.
Do not plug in this unit to a wall outlet until all
connections are complete.
Do not operate this unit upside-down. It may
overheat, possibly causing damage.
Do not use force on switches, knobs and/or cords.
When disconnecting the power cable from the wall
outlet, grasp the plug; do not pull the cable.
Do not clean this unit with chemical solvents; this
might damage the finish. Use a clean, dry cloth.
Only voltage specified on this unit must be used.
Using this unit with a higher voltage than specified is
dangerous and may cause fire, damage to this unit,
and/or personal injury. Yamaha will not be held
responsible for any damage resulting from use of this
unit with a voltage other than specified.
To prevent damage by lightning, keep the power
cable disconnected from a wall outlet or this unit
during a lightning storm.
Do not attempt to modify or fix this unit. Contact
qualified Yamaha service personnel when any
service is needed. The cabinet should never be
opened for any reasons.
iii En
15 When not planning to use this unit for long periods of
time (i.e. vacation), disconnect the AC power plug
from the wall outlet.
16 Be sure to read the “TROUBLESHOOTING” section
on common operating errors before concluding that
this unit is faulty.
17 Before moving this unit, press
to set the system to
off, and disconnect the AC power plug from the wall
outlet.
18 Condensation will form when the surrounding
temperature changes suddenly. Disconnect the power
cable from the outlet, then leave this unit alone.
19 When using this unit for a long time, this unit may
become warm. Turn the system off, then leave this
unit alone for cooling.
20 Install this unit near the wall outlet and where the AC
power plug can be reached easily.
21 The batteries shall not be exposed to excessive heat
such as sunshine, fire or the like. When you dispose
of batteries, follow your regional regulations.
22 Be sure to use the AC adaptor supplied with this unit.
Using an AC adaptor other than the one provided
may cause fire or damage to this unit.
23 Excessive sound pressure from earphones and
headphones can cause hearing loss.
This unit is not disconnected from the AC power source
as long as it is connected to the wall outlet, even if this
unit itself is turned off by . In this state, this unit is
designed to consume a very small quantity of power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
There is a chance that placing this unit too close to a
CRT-based (Braun tube) TV set might impair picture
color. Should this happen, move this unit away from the
TV set.
English
CONTENTS
SHUFFLE/REPEAT PLAYBACK ............. 12
USING SLEEP FUNCTION...................... 12
TONE CONTROL..................................... 12
TROUBLESHOOTING ............................. 13
NOTES ON DISCS AND USB DEVICES
................................................................. 16
SPECIFICATIONS ................................... 17
Español
X Features
– iPod/iPhone, CD, USB device, radio and external device using AUX are playable.
– Synchronization iPod/iPhone with iTunes through this unit is available (iPod
iTunes Sync function).
– Providing comfortable wake-up by the music set with your preferred volume with alarm function.
Music, beep sound, or both can be set as alarm sound (IntelliAlarm function).
– Storing/calling your five favorite radio stations easily.
– Bass, middle, treble can be controlled depending on your favorite.
X About this manual
• “iPod” described in this manual may also refer to “iPhone”.
• This manual describes how to operate this unit using buttons on the unit. Some of these operations are also
available using the remote control.
X Supplied accessories
Remote
control
AC
adaptor
Power
cable
Indoor FM
antenna
AM loop
antenna
Dock
cover
USB cap
Note
(With CR2025
battery)
Keep the USB cap out
of the reach of
children, so that it is
not mistakenly
swallowed.
(DC 15 V, more
than 2.56 A
Model number:
EADP-38EB A or
NU40-2150266-I3)
X Using the remote
control
X Replacing the battery in the remote
control
While pushing the release tab in direction
battery holder in direction
.
, slide out the
1
Within 6 m
(20’)
CR2025
battery
Battery insulation
sheet: Remove
before using.
Français
NAMES OF PARTS AND THEIR
FUNCTIONS...............................................2
ADJUSTING THE CLOCK..........................5
LISTENING TO iPod ..................................6
LISTENING TO CD AND USB DEVICE .....7
LISTENING TO RADIO STATIONS ...........8
LISTENING TO EXTERNAL SOURCE ......8
USING ALARM FUNCTION .......................9
2
3
1 En
PREPARATION
NAMES OF PARTS AND THEIR FUNCTIONS
X Top panel
Set your iPod in the iPod dock.
y
An iPod is charged when set in the iPod dock. During power save mode, the iPod is not
charged.
Notes
Dock
Adaptor
• Be sure to use a dock adaptor that is compatible with your iPod. If you do not use the
adaptor or the adopter is not compatible, the connection could be loose or poor, which
could cause damage to the connector.
• If an iPod in protective case is connected by force, the connector may be damaged.
Remove the protective case before connection.
• When the iPod is not in use, set the dock cover to protect the connector.
1 iPod dock: Set an iPod.
2 USB port (☞ P. 7)
4 DIMMER: Setting brightness of the front panel
A (auto) 3 (brightest) 2 1 (darkest) back to A
y
Note
When A (auto) is set, the brightness of the front panel is
adjusted automatically depending on the brightness of the
room.
When the USB device is not in use, set the USB cover to
protect the connector.
3
5 ALARM: Alarm on/off (☞ P. 11)
: Press to turn the system on/off.
Time is displayed even when the system is off.
6 SET: Alarm setting (☞ P. 9)
y
7 SNOOZE/SLEEP (☞ P. 11, 12)
• Press and hold
on the top of the unit for more than 3
seconds to set the system to power save mode. All the
information on the front panel display is not displayed
in power save mode. This can reduce power
consumption. To cancel power save mode, press
on
the top of the unit.
• Even in system off/standby mode, the alarm function is
available.
8 TUNING (☞ P. 8)
2 En
9 Audio control buttons: Skip, search backward/
forward, play/pause, stop
0
: Ejecting the CD.
A Disc slot (☞ P. 7)
NAMES OF PARTS AND THEIR FUNCTIONS
English
X Front panel
1 Front panel display: Displays the clock and various
information.
6 SOURCE: Change sources.
2 Preset indicator: Shows preset radio station
number (☞ P. 8)
8
3 PLAY indicator
Shuffle indicator
Repeat indicator
: Shows playback status. (☞ P. 10, 12)
7 VOLUME: Volume control
knob
(During playing data CD/USB): Change folders
(During receiving radios): Select the preset radio
station. (☞ P. 8)
9 Headphones jack: Connect headphones.
0 MEMORY: Memories preset radio station. (☞ P. 8)
4 Source indicator: Shows selected source.
A EQ: Tone control (☞ P. 12)
5 Illumination sensor: Measuring surrounding
illuminance. Do not cover this sensor.
B SYNC: iPod
(☞ P. 6)
iTunes Sync function on/off
3 En
NAMES OF PARTS AND THEIR FUNCTIONS
X Rear panel (Connecting antenna)
Notes
• The antenna should be
stretched out.
• If you use an outdoor
antenna instead of the
supplied antenna, reception
will be better.
• If radio reception is poor,
change the height, direction,
or placement of the antenna.
5 USB FOR SYNC.: Connect to PC. (☞ P. 6)
1 FM antenna terminal: Connect the supplied indoor
FM antenna.
2 AM antenna terminal: Connect the supplied AM
loop antenna.
6 15V
: Connect supplied AC adaptor and power
cable.
7 CLOCK: Adjust the clock. (☞ P. 5)
3 GND: Connect the cable core of the Indoor FM
antenna (see below).
8 ALARM TYPE: Set alarm type of IntelliAlarm
function. (☞ P. 9)
4 AUX: Connect an external device. (☞ P. 8)
9 Indoor FM antenna (supplied)
Connecting an indoor FM antenna to the GND terminal
It is recommended to connect the indoor FM antenna to the GND terminal before connecting to the FM antenna terminal.
Ring
1
2
3
1 Remove insulation and twist
the edge of the cord.
2 Fully screw down the GND terminal.
3 Wind the cord around the GND terminal.
Make sure the cord is wound inside of the ring part.
Assembling AM loop antenna
4 En
4
4 Tighten the GND terminal taking care
not to slip the cord off from the
terminal.
ADJUSTING THE CLOCK
English
X Remote control
iPod control buttons
1 Infrared signal transmitter
2
7
: System on/off
3 Source buttons: Change sources.
4 FOLDER (during playback): When source contains
folders, change played folder.
PRESET (during receiving radio): Select the preset
radio station (☞ P. 8)
5
(Shuffle),
6
: Stop playback.
(Repeat) (☞ P. 12)
8
,
(during playback): Skip and search
backward/forward
TUNING (during receiving radio): Tuning radio
(☞ P. 8)
: Play/pause
9 MUTE: Mute/resume the sound.
0 VOLUME: Volume control
A SNOOZE/SLEEP: Snooze/sleep setting
(☞ P. 11, 12)
B ALARM: Alarm on/off (☞ P. 11)
C SYNC: iPod
(☞ P. 6)
iTunes Sync function on/off
ADJUSTING THE CLOCK
1
1 Set CLOCK to SET.
2
2 Set the time.
Set the time with
knob.
3 Set CLOCK to LOCK to
complete.
Rear panel
Front panel
At the time LOCK is set, it will be 00
second and time count starts.
y
3
• On step 2, you can copy the time of iPod
instead of setting time manually by setting the
iPod to the iPod dock. If iPod is already in the
iPod dock when CLOCK is set to SET, the
time in the iPod is not copied to this unit.
• Press SNOOZE/SLEEP to switch between
the 12 and 24 hour clock display.
Note
The time settings are lost about one week after
unplugging the unit.
5 En
OPERATION
LISTENING TO iPod
Listening to iPod
For details on compatible iPod models, refer to “SPECIFICATIONS” (☞ P. 17).
1
1 Set your iPod in the iPod dock.
2
2 Set SOURCE to iPod.
3 Play the iPod.
Playback operations are available with
the remote control, iPod and this unit.
y
• You can remove the iPod whenever you
want.
• When music/video in the iPod is played
back, this unit turns the system on
automatically and plays back the iPod
even if the unit is system off.
Front panel
Synchronizing with iTunes (iPod
iTunes Sync function)
You can synchronize your iPod with your iTunes through this unit.
1
1 Connect this unit to PC with
commercially available USB 2.0
cable (A/Mini-B).
2
Note
Use USB 2.0 cable shorter than 2 m (6.6').
2 Set your iPod in the iPod dock.
Rear panel
3 Turn the system on.
3
SYNC indicator located on the left
side of the SYNC lights up.
4
4 Set SOURCE to iPod.
5 Press and hold SYNC.
Top panel
5
SYNC indicator flashes. After that,
synchronize to iPod with iTunes using
PC. For details on synchronization,
refer to the manual of iPod.
Front panel
6
Press and
hold
Synchronize
Press and
hold
6 Press and hold SYNC to
complete after disconnecting the
iPod on iTunes.
y
During synchronizing, source other than iPod
can be played back.
Notes
Front panel
6 En
• During synchronizing, system cannot be
turned off.
• Do not remove the iPod, USB cable, AC
adaptor and power cable during synchronizing.
• During synchronizing, alarm function does
not work.
English
LISTENING TO CD AND USB DEVICE
X Listening to CD
1 Set SOURCE to CD.
1
2
2 Insert a CD.
Playback starts automatically.
Playback operations are available with
the remote control and this unit.
Note
Insert the CD with the label side facing
toward the front of the unit.
Front panel
X Listening to USB device
1
1 Set SOURCE to USB.
2
2 Connect a USB device.
Playback starts automatically.
Playback operations are available with
the remote control and this unit.
y
• You can remove your USB device
whenever you want.
• USB playback order is determined as
follows:
– Folders are played in alphabetical order of
the first three characters in the folder name.
Other characters come after the alphabet.
– Files are played in recording order.
Front panel
y
• If button on the top panel is pressed during playback, next time playback starts from the beginning of the track you
listened to last time. If
button is pressed again while playback is stopped, next time playback starts as follows:
– For audio CD: from the first track of the CD.
– For data CD/USB device: from the first track of the folder contains the track you listened to last time.
• For details on playable discs and files, refer to “NOTES ON DISCS AND USB DEVICES” (☞ P. 16).
• This unit automatically turns off the system 60 minutes after CD/USB device playback is stopped.
X Display information
Track or folder and file number appears for a while when playback starts.
Playing back audio CD
Playing back data CD/USB device
Folder number
Track number
X Skipping folder for data CD/USB device
File number
Select the folder with
knob
when data CD/USB device is
played back.
Front panel
7 En
LISTENING TO RADIO STATIONS
X Tuning radio stations
1 Set SOURCE to FM/AM.
1
2
2 For automatic tuning, press and
hold TUNING.
For manual tuning, press
TUNING repeatedly.
Top Panel
Front panel
Note
If you tune to a station manually, the sound
is monaural.
X Presetting radio stations
You can store your favorite 5 radio stations with the preset function.
1
2
3
4
1 Tune into a favorite radio station.
2 Press MEMORY.
3 Select the PRESET number you
want to store to.
Top Panel
y
Front panel
To cancel the preset, press TUNING again.
4 Press MEMORY to complete.
Front panel
X Selecting preset radio stations
1
2
1 Set SOURCE to FM/AM.
2 Select the preset radio station
with
knob.
Front panel
Front panel
LISTENING TO EXTERNAL SOURCE
1
1 Connect your portable audio
device to AUX using a
commercially available 3.5 mm
(1/8 in) mini plug cable.
2
Note
Turn down the volume of this unit and your
portable audio device before connection.
Rear Panel
Front panel
2 Set SOURCE to AUX.
3 Start playback on the connected
portable audio device.
8 En
English
USING ALARM FUNCTION
Features of IntelliAlarm
This unit can play back your favorite music and/or beep sound at the set time. The alarm function
(IntelliAlarm) has following features.
• This unit has 3 alarm types combining music and beep sound:
SOURCE+BEEP Selected audio source and the beep sound are played at the set time. Source playback begins to fade
in 3 minutes before the set time and the volume gradually increases to the set volume. Then, at the set
time, the beep sound is activated. This mode is recommended for a comfortable wake-up.
SOURCE
Selected source plays at the set time. Fade-in volume gradually increases to the set volume.
BEEP
Only beep sound is played back at the set time.
• Alarm source played back at the set time can be selected from iPod, audio CD, data CD, USB
device, and radio. Depending on the source, followings also can be selected:
SOURCE
iPod
Audio CD
Data CD/USB
FM/AM
Selectable item
Function
Playlist
The specified playlist is played back repeatedly. When you want to play
a playlist, create “ALARM Yamaha DTA” playlist in advance. Make
sure it is named exactly as shown here, with spaces between the words
and the same upper/lower case letters.
Resume play
When the “ALARM Yamaha DTA” playlist is not in the iPod, the track
you listened to last time is resumed.
Track
The Selected track is played back repeatedly.
Resume play
The track you listened to last time is played back.
Folder
The Selected folder is played back repeatedly.
Resume play
The folder you listened to last time is played back.
Preset
The selected preset radio station is played.
Resume play
The radio station you listened to last time is played.
• You can check the sound of the set alarm when making the alarm setting.
• Snooze function is also available.
Alarm setting
X Setting the alarm time and sound
1
1 Press SET.
Alarm indicator (
items flash.
2
) and setting
2 Set the alarm time with
knob.
Top panel
Front panel
9 En
USING ALARM FUNCTION
3
3 Set ALARM TYPE.
4
(As required)
Select from SOURCE+BEEP,
SOURCE or BEEP. For the details
on alarm type, Refer to “Features of
IntelliAlarm (☞ P. 9)”.
4 Select SOURCE (as required).
Rear panel
Front panel
When you select SOURCE+BEEP or
SOURCE, select source. A source
other than AUX can be selected.
5 Select a track, folder or radio
station (as required).
5
When the source is CD/USB/FM/AM,
select a track, folder or radio station
for alarm with
/
.
6
y
(As required)
Top panel
Front panel
7
• When iPod is set as source, this unit plays
back “ALARM Yamaha DTA” playlist at
the set time. If the playlist is not in the
iPod, the track you listened to last time is
resumed.
• When CD/USB is selected and “0” is set
as track/folder number, the track you
listened to last time is resumed.
• When FM/AM is selected and number of
preset indicator (☞ P. 3) is not displayed,
the radio station you listened to last time
is played.
Note
When selected source is not set, setting on
step 5 cannot be set.
6 Set the alarm volume with
VOLUME.
y
Top panel
When PLAY indicator flashes, set alarm
can be played back by pressing
. Press
to stop the alarm.
7 Press SET to complete.
Alarm is set and the alarm indicator
(
) lights up.
10 En
USING ALARM FUNCTION
Switch on/off the alarm function.
y
When the alarm is on, the alarm indicator
(
) lights up and alarm time is displayed
for a while.
Top panel
Operations during playing back alarm sound
At the set time, alarm sound plays back. During playback, operations below are available.
Note
If source cannot be played back at the alarm time (ex. iPod is not set), beep sound is played back.
X Using the snooze function
Press SNOOZE/SLEEP.
The alarm sound stops and resumes
after 5 minutes.
y
Top panel
X Stopping the alarm
• When SOURCE+BEEP is set, press
SNOOZE/SLEEP to stop the beep sound.
press SNOOZE/SLEEP again to stop the
source. After 5 minutes from the source is
stopped, the source with fading in and beep
sound resumes.
• When the snooze function is activated, alarm
indicator flashes.
Press ALARM or
.
y
Top panel
Top panel
• Unless you stop the alarm, the alarm stops
after 60 minutes automatically.
• The alarm function turns off when you
stop the alarm, but settings such as the
alarm time are saved for convenient use
next time. To set the alarm again, press
ALARM.
11 En
English
X Switching the alarm on/off
SHUFFLE/REPEAT PLAYBACK
Shuffle playback
Repeat playback
Press repeatedly
Press repeatedly
Remote control
Remote control
Shuffle indicator lights up as follows.
Repeat indicator lights up as follows.
(folder shuffle)
(all shuffle)
(No display: Off)
Back to the top.
(folder repeat)
(all repeat)
(single repeat)
(No display: Off)
Back to the top.
y
• When source contains folders, folder shuffle/repeat can be selected.
• For some iPod models, the shuffle and repeat functions may not be displayed or supported.
• When iPod is played back, the setting order of shuffle and repeat depends on the iPod model.
USING SLEEP FUNCTION
You can set the time to turn off the system automatically.
Select the sleep time.
You can set 30, 60, 90 or 120 minutes.
When the time is set, the sleep
function is set to on, and the sleep
indicator (
) lights up.
Press repeatedly
y
To cancel the sleep, press SNOOZE/
SLEEP.
Top panel
TONE CONTROL
1
2
1 Press EQ during playback.
LOW, MID and HIGH light up.
2 Adjust the tone with LOW, MID
and HIGH.
3 Press EQ to complete.
Front panel
Front panel
3
12 En
ADDITIONAL INFORMATION
English
TROUBLESHOOTING
In case of a problem with the unit, check the following list first. If you cannot solve your problem with the
suggested solutions or if your problem is not listed below, turn off and unplug the unit, and consult the nearest
authorized Yamaha dealer or service center.
General
Problem
The speakers make no
sound.
Cause
The volume may be set to the minimum
level.
Solution
Adjust the volume level.
The source may be incorrect.
Select the correct source.
Headphones are connected.
Remove the headphones.
Sound suddenly turns off.
The sleep (☞ P. 12) may be set.
Turn on the system and play the source
again.
Sound is cracked/distorted
or there is abnormal noise.
Input source volume is excessive, or
volume of this unit is excessive
(especially Bass).
Adjust volume with VOLUME, or adjust
Bass with EQ (☞ P. 3, 12).
The unit does not operate
properly.
The unit may have received a strong
electrical shock such as lightning or
excessive static electricity, or power
supply may have dropped.
Set the system to off, and disconnect the
power cable. Wait about 30 seconds,
reconnect the power cable, and turn on the
system.
The system turns on but
immediately shuts off.
The unit may be placed too close to the
A digital or high-frequency
equipment produces noises. digital or high-frequency equipment.
Place the unit farther away from the
equipment.
The clock setting has been
cleared.
The unit is left more than one week after Plug the power cable into the wall outlet
you disconnect the power cable from the firmly, and set the clock again (☞ P. 5).
wall outlet.
iPod does not play back at
the alarm time even if
SOURCE is set to iPod.
The iPod is not set in the iPod dock.
Set the iPod in the iPod dock (☞ P. 2).
ALARM TYPE is set to BEEP.
Set ALARM TYPE to SOURCE+BEEP or
SOURCE (☞ P. 9).
Clock flashes and the unit
cannot be operated.
CLOCK on the rear panel is set to SET,
and this unit is in clock setting mode.
Set CLOCK to LOCK.
13 En
TROUBLESHOOTING
iPod
Problem
No sound
Cause
The iPod is not set in the iPod dock
firmly.
Solution
Set the iPod firmly.
Earphones are connected.
Remove the earphones.
The iPod software version has not been
updated.
Download the latest iTunes software to
update the iPod software version to the
latest.
The iPod does not charge up. The iPod is set in the iPod dock
improperly.
The system is set to power save mode
(☞ P. 2).
Remove the iPod from the unit, and then set
it in the iPod dock again (☞ P. 2).
Press
to cancel the power save mode.
Flashing iPod indicator twice The iPod being used is not supported by Use a supported iPod (☞ P. 17).
the unit.
is repeated 3 times after
connecting the iPod.
Synchronization with iTunes Depending on the PC or USB cable,
signal damping is increased and the
cannot be performed using
connection might be failed.
this unit.
Use shorter USB 2.0 cable.
Disc playback
Problem
Cause
Solution
Disc cannot be inserted.
The system is set to power save mode
(☞ P. 2).
Some button operations do
not work.
The disc loaded into the unit may not be Use a disc supported by the unit (☞ P. 16).
compatible.
Playback does not start
immediately after pressing
.
The disc may be dirty.
Press
to cancel the power save mode.
Wipe the disc clean.
The disc loaded into the unit may not be Use a disc supported by the unit (☞ P. 16).
compatible.
If the unit was moved from a cold to
warm place, condensation may have
formed on the disc reading lens.
Wait for an hour or two until the unit
adjusts to the room temperature, and try
again.
CD indicator repeats flashing The disc loaded into the unit may not be Use a disc supported by the unit (☞ P. 16).
twice 3 times, and the disc is compatible.
unloaded.
The disc may be dirty.
Wipe the disc clean.
The disc is loaded back to front.
Insert a disc facing the label side to near
side.
The disc does not contain playable files.
Use a disc contains playable files
(☞ P. 16).
“Err” is displayed in the front An error occurs in the unit.
panel display after loading a
disc.
14 En
Unload the disc with
.
TROUBLESHOOTING
English
USB device playback
Problem
MP3/WMA file in the USB
device does not play.
Cause
The USB device is not recognized.
Solution
Turn off the system and reconnect the USB
device to the unit.
Connect an AC adapter if supplied with the
device.
If the solutions above do not resolve the
problem, the USB device is not playable on
the unit.
Flashing USB indicator twice An incompatible USB device is
connected to the unit.
is repeated 3 times after
connecting a USB device.
The USB device does not contain
playable files.
“Err” is displayed in the front An incompatible USB device is
connected to the unit.
panel display after
connecting a USB device.
An overcurrent is detected.
Turn off the system and reconnect the USB
device to the unit. If it does not resolve the
problem, the USB device is not playable on
the unit.
Use a USB device contains playable files
(☞ P. 16).
Turn off the system and reconnect the USB
device to the unit. If it does not resolve the
problem, the USB device is not playable on
the unit.
Radio reception
Problem
Too much noise during
stereo broadcast.
Cause
The antenna may be connected
improperly.
Solution
Make sure the antenna is connected
properly (☞ P. 4).
The radio station you selected may be far Try manual tuning to improve the signal
from your area, or the radio wave
quality (☞ P. 8) or use a multi-channel
reception is weak in your area.
outdoor antenna.
Even with an outdoor
antenna, radio wave
reception is weak. (Sound is
distorted.)
Multipath reflection or other radio
interferences may have occurred.
Change the height, direction, or placement
of the antenna.
Remote control
Problem
Cause
The remote control does not The remote control may be operated
outside its operation range.
work properly.
Solution
For information on the remote control
operation range, refer to “Using the remote
control” (☞ P. 1).
The remote control sensor on the unit
may be exposed to direct sunlight or
lighting (inverted fluorescent lamps).
Change the lighting or orientation of the
unit.
The battery may be worn out.
Replace the battery with a new one.
There are obstacles between the sensor of Remove the obstacles.
the unit and the remote control.
15 En
NOTES ON DISCS AND USB DEVICES
Disc information
This unit is designed for use with audio CD, CD-R*,
and CD-RW* with the logos followings.
• If a disc becomes
dirty, wipe it with a
clean, dry cloth from
the center out to the
edge. Do not use
record cleaner or
paint thinner.
• To avoid
malfunction, do not
use a commercially
available lens
cleaner.
USB device information
* ISO 9660
y
This unit can play back discs bearing any of the logo marks
above. A disc logo mark is printed on the disc and the disc
jacket.
Notes
• Do not load any other type of disc into this unit. Doing so
may damage this unit.
• CD-R/RW cannot be played back unless finalized.
• Some discs cannot be played back depending on the disc
characteristics or recording conditions.
• Do not use any non-standard shaped discs such as a heartshaped disc.
• Do not use discs with many scratches on their surface.
Handling a disc
• Do not touch the surface of
the disc. Hold a disc by its
edge (and the center hole).
• Do not use a pencil or
pointed marker to write on
the disc.
• Do not put a tape, seal, glue, etc., on a disc.
• Do not use a protective cover to prevent scratches.
• Do not load more than one disc into this unit at one time.
This can cause damage to both this unit and the discs.
• Do not insert any foreign objects into the disc slot.
• Do not load a cracked, warped, or glued disc.
• Do not expose a disc
to direct sunlight,
Caution
high temperature,
high humidity, or a
lot of dust.
16 En
This unit supports USB mass storage class devices
(e.g., flash memories or portable audio players) using
FAT16 or FAT32 format.
Notes
• Some devices may not work properly even if they meet the
requirements.
• Do not connect devices other than USB mass storage class
devices (such as USB chargers or USB hubs), PCs, card
readers, an external HDD, etc.
• Yamaha will not be held responsible for any damage to or
data loss on the USB device occurring while the device is
connected to this unit.
• Playability of and power supply to all kind of USB devices
are not guaranteed.
About MP3 or WMA files
Notes
• The unit can play back:
File
MP3
WMA
Bitrate (kbps)
8 - 320**
16 - 320**
Sampling
frequency (kHz)
16 - 48
22.05 - 48
** Both constant and variable bitrates are supported.
• The maximum numbers of files/folders that can be
displayed on the unit are as follows.
Data CD
512
USB
9999
Maximum folder number
255
128
Maximum file number per folder
511
255
Maximum total number of file
• Copyright-protected files cannot be played back.
English
SPECIFICATIONS
X PLAYER SECTION
LASER SAFETY
iPod (Digital connection)
This unit employs a laser. Due to possible eye injury, only a
qualified service person should remove the cover or attempt
to service this device.
• Made for ............. iPod touch(1st, 2nd, and 3rd generation)
iPod classic
iPod nano (2nd, 3rd, 4th, and 5th generation)
iPhone 4
iPhone 3GS
iPhone 3G
iPhone
CD
• Media........................................................... CD, CD-R/RW
• Audio format ................................. Audio CD, MP3, WMA
Laser
• Type.............................Semiconductor laser GaAs/GaAlAs
• Wave length .............................................................790 nm
• Output Power ............................................................. 7 mW
USB
• Audio format ....................................................MP3, WMA
AUX
• Input connector
.................................... 3.5 mm (1/8 in) STEREO mini Jack
X AMPLIFIER SECTION
• Maximum output power ................................. 15 W + 15 W
(6 Ω 1 kHz, 10% THD)
• Headphones ............................ 3.5 mm STEREO mini Jack
(Adaptive Impedance 16 to 32 Ω)
X TUNER SECTION
• Tuning range
FM ...................................................87.50 to 107.90 MHz
AM ......................................................... 530 to 1710 kHz
X GENERAL
•
•
•
•
•
•
Power Supply ...........................................AC 120 V, 60 Hz
Power consumption ..................................................... 20 W
System off consumption ............................................. 1.5 W
Power save consumption .................................0.5 W or less
USB FOR SYNC. terminal ..............................USB mini-B
Dimensions (W × H × D) ................... 399 × 181 × 137 mm
(15 3/4 × 7 1/8 × 5 3/8 in)
• Weight .........................................................3.2 kg (7.1 lbs.)
DANGER
This unit emits visible laser radiation when open. Avoid
direct eye exposure to beam. When this unit is plugged into
the wall outlet, do not place your eyes close to the opening of
the disc tray and other openings to look into inside.
The laser component in this product is capable of
emitting radiation exceeding the limit for Class 1.
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party: Yamaha Electronics Corporation,
U.S.A.
Address:
6660 Orangethorpe Avenue
Buena Park, CA 90620
Telephone:
714-522-9105
Fax:
714-670-0108
Type of Equipment:
DESKTOP AUDIO SYSTEM
Model Name:
TSX-140
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received
including interference that may cause undesired
operation.
See user manual instructions if interference to radio
reception is suspected.
• The name plate is located on the bottom of the unit.
Specifications are subject to change without notice.
iPod, iPhone
“Made for iPod,” and “Made for iPhone” mean that an
electronic accessory has been designed to connect
specifically to iPod, or iPhone, respectively, and has been
certified by the developer to meet Apple performance
standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
iPhone, iPod, iPod classic, iPod nano, iPod touch and iTunes
are trademarks of Apple Inc., registered in the U.S. and other
countries.
17 En
© 2010 Yamaha Corporation
Printed in China
WV77940