Poly RealPresence OTX Studio Deployment Guide

Add to my manuals
81 Pages

advertisement

Poly RealPresence OTX Studio Deployment Guide | Manualzz

DEPLOYMENT GUIDE

Polycom

®

Immersive

Telepresence (ITP)

5.0.0 | September 2015 | 3725-26703-003A

Copyright

©

2015, Polycom, Inc. All rights reserved. No part of this document may be reproduced, translated into another language or format, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Polycom, Inc.

6001 America Center Drive

San Jose, CA 95002

USA

Trademarks

Polycom

®

, the Polycom logo and the names and marks associated with Polycom products are trademarks and/or service marks of Polycom, Inc. and are registered and/or common law marks in the United States and various other countries.

All other trademarks are property of their respective owners. No portion hereof may be reproduced or transmitted in any form or by any means, for any purpose other than the recipient's personal use, without the express written permission of Polycom.

Disclaimer

While Polycom uses reasonable efforts to include accurate and up-to-date information in this document,

Polycom makes no warranties or representations as to its accuracy. Polycom assumes no liability or responsibility for any typographical or other errors or omissions in the content of this document.

Limitation of Liability

Polycom and/or its respective suppliers make no representations about the suitability of the information contained in this document for any purpose. Information is provided "as is" without warranty of any kind and is subject to change without notice. The entire risk arising out of its use remains with the recipient. In no event shall

Polycom and/or its respective suppliers be liable for any direct, consequential, incidental, special, punitive or other damages whatsoever (including without limitation, damages for loss of business profits, business interruption, or loss of business information), even if Polycom has been advised of the possibility of such damages.

End User License Agreement

By installing, copying, or otherwise using this product, you acknowledge that you have read, understand and agree to be bound by the terms and conditions of the End User License Agreement for this product. The EULA for this product is available on the Polycom Support page for the product.

Patent Information

The accompanying product may be protected by one or more U.S. and foreign patents and/or pending patent applications held by Polycom, Inc.

Open Source Software Used in this Product

This product may contain open source software. You may receive the open source software from Polycom up to three (3) years after the distribution date of the applicable product or software at a charge not greater than the cost to Polycom of shipping or distributing the software to you. To receive software information, as well as the open source software code used in this product, contact Polycom by email at

[email protected].

Customer Feedback

We are striving to improve our documentation quality and we appreciate your feedback. Email your opinions and comments to [email protected]

.

Polycom Support

Visit the Polycom Support Center for End User License Agreements, software downloads, product documents, product licenses, troubleshooting tips, service requests, and more.

2

Before You Begin

The Polycom Immersive Telepresence (ITP) Deployment Guide provides the best practices for configuring multipoint conferences on Polycom

®

RealPresence

®

Collaboration Server 4000 and Polycom

®

RealPresence

®

Collaboration Server 2000 real-time multimedia conference platforms with the following telepresence solutions:

● Polycom RealPresence OTX Studio

● Polycom RealPresence ®

Experience (RPX™) 400 Series

● Polycom RPX 200 Series

● Polycom Open Telepresence Experience™ (OTX™) 300

● Polycom OTX 100

● Polycom Telepresence Experience ®

(TPX

®

) 306M

● Polycom TPX 204M

● Polycom Architected Telepresence Experience™ (ATX™) HD 300

● Polycom ATX SDK (which supports the ATX 200, ATX 300, and ATX 400 hardware platforms)

● Polycom RealPresence ®

Immersive Studio 9-seat and 21-seat

This guide is intended for Immersive Telepresence (ITP) administrators and for Polycom RealPresence

Collaboration Server 4000 and 2000 administrators who manage telepresence calls. The ITP and

RealPresence Collaboration Server administrators should have:

● Prior knowledge and experience with the RealPresence Collaboration Server 4000 and 2000 conference platforms and with the Polycom Multipoint Layout Application (MLA).

● Familiarity with configuring both overall conference settings and with configuring the personal layouts of the conference sites.

● Access to Polycom RealPresence Collaboration Server 4000 and 2000, RPX, OTX, TPX, ATX, MLA, and RealPresence Immersive Studio product documentation.

Polycom, Inc. 3

Contents

Conventions Used in This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Information Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Typographic Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

User-Initiated Multipoint Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Multipoint Best Practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Calculating and Naming Conference Sites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Calculating Total Conference Sites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Naming Sites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Understanding Multipoint with OTX, TPX, and ATX Systems . . . . . . . . . . . . . . . . . . . . . . . . . 10

Recording Telepresence Conferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Multiple Cascade Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Other Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Configuring RealPresence Collaboration Server Settings for ITP Systems . . . 13

Configuring the RealPresence Collaboration Server Settings for 1080p HD Video . . . . . . . . 13

Configuring the RealPresence Collaboration Server Settings for 720p/60 HD Video . . . . . . . 17

Configuring the RealPresence Collaboration Server Settings for 720p/30 HD Video . . . . . . . 20

Configuring Other RealPresence Collaboration Server Settings . . . . . . . . . . . . . . . . . . . . . . . 23

Configuring RealPresence Collaboration Server Settings for Large Conferences . . . . . . . . . 24

Multipoint Framing Scenarios for Immersive Telepresence . . . . . . . . . . . . . . . . 25

Manual Video Layout Framing Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

ITP Compatibility History (Version 3.1.0 and Earlier) . . . . . . . . . . . . . . . . . . . . . 76

ITP Compatibility History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

ITP Software Version Matrices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Polycom, Inc. 4

Conventions Used in This Guide

This guide contains terms, graphical elements, and a few typographic conventions. Familiarizing yourself with these terms, elements, and conventions will help you successfully perform tasks.

Information Elements

This guide may include any of the following icons to alert you to important information.

Icons Used in this Guide

Icon Name

Note

Caution

Warning

Web Info

Administrator Tip

Description

The Note icon highlights information of interest or important information needed to be successful in accomplishing a procedure or to understand a concept.

The Caution icon highlights information you need to know to avoid a hazard that could potentially impact device performance, application functionality, or successful feature configuration.

The Warning icon highlights an action you must perform (or avoid) to prevent issues that may cause you to lose information or your configuration setup, and/or affect phone, video, or network performance.

The Web Info icon highlights supplementary information available online such as documents or downloads on support.polycom.com or other locations.

The Administrator Tip icon highlights techniques, shortcuts, or productivity related tips.

User Tip

Troubleshooting

The User Tip icon highlights techniques, shortcuts, or productivity related tips.

The Troubleshooting icon highlights information that may help you solve a relevant problem or to refer you to other relevant troubleshooting resources.

Polycom, Inc. 5

Conventions Used in This Guide

Typographic Conventions

A

A few typographic conventions, listed next, may be used in this guide to distinguish types of in-text information.

Typographic Conventions

Convention

Bold

Italics

Blue Text

Courier

Description

Highlights interface items such as menus, menu selections, window and dialog names, soft keys, file names, and directory names when they are involved in a procedure or user action. Also used to highlight text to be entered or typed.

Used to emphasize text, to show example values or inputs (in this form: <example>), and to show titles of reference documents available from the Polycom Support Web site and other reference sites.

Used for cross references to other sections within this document and for hyperlinks to external sites and documents.

Used for code fragments and parameter names.

Polycom, Inc. 6

User-Initiated Multipoint Dialing

This chapter contains information about user-initiated multipoint dialing.

For information about ITP software and hardware compatibility for software versions newer than 3.1.0, refer to the ITP Release Notes for the specific version or the current Polycom Supported Products matrix located at

PolycomService/support/us/support/service_policies.html

.

For information about ITP software and hardware compatibility for software versions 3.1.0 and earlier, refer to

Appendix C

or the ITP Release Notes for the specific version.

You can configure your ITP solution (RPX, OTX, TPX, or ATX) to enable four different types of user-initiated multipoint conferences:

Polycom Conferencing for Microsoft Outlook: Users can view a list of scheduled meetings and join those meetings.

Meeting Composer: Users can launch multipoint calls directly from the ITP room by choosing all of the conference participants. Once the conference is connected, users can add and drop conference participants as needed.

Group Dialing or Multipoint Speed Dialing:

Users can launch Polycom RealPresence

Collaboration Server calls to multiple sites at one time simply by pressing a Favorite or a Speed Dial button that the administrator has configured to dial a pre-determined list of sites.

Single Touch Multipoint: Users can call a Polycom RealPresence Collaboration Server Virtual

Meeting Room (VMR) simply by pressing a Favorite or a Speed Dial button that the administrator has configured to dial into the VMR.

For information about RealPresence Immersive Studio software and hardware compatibility, refer to the RealPresence Immersive Studio Release Notes for the specific version or the current Polycom Supported Products matrix located at

PolycomService/support/us/support/service_policies.html

.

You can configure your RealPresence Immersive Studio system and RealPresence OTX Studio system to enable three different types of user-initiated multipoint conferences:

Polycom Conferencing for Microsoft Outlook: Users can view a list of scheduled meetings and join those meetings.

Polycom, Inc. 7

User-Initiated Multipoint Dialing

Meeting Composer: Users can launch multipoint calls directly from the RealPresence Immersive

Studio room or from the RealPresence OTX Studio room by choosing all of the conference participants from Favorites or from the Directory. Once the conference is connected, users can add conference participants as needed. Users can also make a point-to-point call and then add a participant. The end point must have Polycom Distributed Media Application 7000 configured.

Single Touch Multipoint: Users can call a Polycom RealPresence Collaboration Server Virtual

Meeting Room (VMR) simply by pressing a Favorite or a Speed Dial button that the administrator has configured to dial into the VMR.

These user-initiated multipoint conference features are available to sites using a RealPresence

Collaboration Server without MLA. Two modes are supported:

Speaker Priority: In Speaker Priority mode, each room system reserves screens to provide high visibility according to maximum number of room-screens in the conference, displaying the active speaker in the largest video layout cell available.

Voice Activated Room Switching (VARS): In VARS mode, the speaker's site is the only site seen by others. The view of the speaker's site is sized to be as large as possible on all of the other participants' displays. The current speaker sees the previous speaker's site (that is, the speaker's layout remains unchanged). While you can also use VARS mode with MLA, Polycom recommends using VARS mode with RealPresence Collaboration Server and without MLA.

These user-initiated multipoint conference features are available to sites using a RealPresence

Collaboration Server and the MLA in automatic conference layout mode. MLA supports two types of automatic conference layout modes:

Room Continuous Presence: In this standard mode, the multipoint view is automatically generated either to follow the general principles of Polycom Immersive Telepresence multipoint (that is, all participants are "present" during a multipoint conference) or to fit a custom-set view configured by the conference administrator for the combination of sites in a particular conference.

Voice Activated Room Switching (VARS): In VARS mode the speaker's site is the only site seen by others. The view of the speaker's site is sized to be as large as possible on all of the other participants' displays. The current speaker sees the previous speaker's site (that is, the speaker's layout remains unchanged). Layouts used in VARS are not customizable. While you can use VARS mode with MLA, Polycom recommends using VARS mode with RealPresence Collaboration Server and without MLA.

For releases earlier than ITP 3.0.3 and RealPresence Collaboration Server 7.6, VARS should not be used during Polycom Conferencing for Microsoft Outlook or Single Touch Multipoint conferences that have participants at OTX, TPX, or ATX sites. Instead, you should configure those conferences for

Room Continuous Presence mode.

Polycom, Inc. 8

Multipoint Best Practices

In Polycom Immersive Telepresence Series suites, the video is delivered using two, three, or four independent Polycom HDX codecs. In Polycom RealPresence Immersive Studio and Polycom

RealPresence OTX Studio rooms, the video is delivered using three Polycom RealPresence Group Series codecs. This creates additional multipoint complexity over traditional video conferencing because, from the perspective of the Polycom RealPresence Collaboration Server, all of the codecs in an RPX, OTX, TPX,

ATX, or RealPresence Immersive Studio site would typically be treated as though they were separate sites.

Continuous presence transcoding is normally used for telepresence multipoint today. In previous releases, the endpoints in telepresence rooms were “framed” together on the RealPresence Collaboration Server by the multipoint conference platform administrator, using the personal layout control of each conference site.

This approach ensured that the rooms appeared properly within the various continuous presence views.

With the introduction of Version 2.0 of the Polycom Multipoint Layout Application (MLA), the process of managing telepresence conferences became greatly simplified. With MLA, layouts are applied automatically for each telepresence site in a conference.

When Speaker Priority mode is selected each room system reserves screens to provide high visibility according to maximum number of room-screens in the conference, displaying the active speaker in the largest video layout cell available.

For VARS mode, Polycom’s suggested best practice is to use RealPresence Collaboration Server to do

VARS mode internally without MLA. For more information, refer to the RealPresence Collaboration Server documentation. For Room Continuous Presence mode, Polycom suggests setting up the MLA to configure the telepresence conference layouts automatically. You can also use MLA to define custom layout templates for automatic application. For more information, refer to the Polycom Multipoint Layout Application User

Guide for use with Polycom Telepresence Solutions.

Calculating and Naming Conference Sites

As the RealPresence Collaboration Server administrator, you must be familiar with configuring both the overall conference settings and the personal layouts of the conference sites. For more information, refer to the Polycom RealPresence Collaboration Server Administrator’s Guide.

Calculating Total Conference Sites

To calculate the total site connections required for a multipoint conference, use the following formula:

(RPX 200 Series suites * 2) +

(RPX 400 Series suites and ATX 400 sites * 4) +

(OTX 300 sites, TPX 306 sites, and ATX 300 sites * 3) +

(TPX 204 sites and ATX 200 sites *2) +

(OTX 100 and traditional videoconferencing systems * 1) +

Polycom, Inc. 9

Multipoint Best Practices

(OTX Studio sites * 3) =

Total conference sites required for the conference

Naming Sites

Naming the telepresence sites appropriately in the RealPresence Collaboration Server 4000 and 2000 address book is a critical step towards helping to frame the sites correctly.

When naming the sites, you must follow the naming conventions described in the “Setting Up Naming on the HDX Codecs” section of the Polycom Immersive Telepresence (ITP) Administrator’s Guide.

Understanding Multipoint with OTX, TPX, and ATX

Systems

In Room Continuous Presence multipoint calls, the camera views with OTX, TPX, ATX 200, and ATX 300 systems are handled differently than with RPX, ATX 400, OTX Studio and RealPresence Immersive Studio systems. While OTX, TPX, ATX 200, and ATX 300 systems use one camera to capture the full-room view,

RPX, ATX 400, OTX Studio and RealPresence Immersive Studio systems capture a full-room view using all the cameras, with each camera capturing a different portion of the room.

At sites with TPX systems with Eagle Eye 1080 cameras, the cameras capture only the center four seats, not all six, when showing the full room view. TPX systems with Eagle Eye HD or Eagle Eye II cameras show the outer two seats partially obscured from view. This also applies to ATX sites where the table is placed at 110” (2.79 m).

When viewing a 3x3 layout on an OTX, TPX, or ATX screen, the video may be shifted slightly to the right side of the screen.

This camera positioning makes multipoint video layouts straightforward. For an OTX, TPX, ATX 200, or ATX

300 site to be seen by another site, it needs only a single window in a continuous presence layout. If there are few sites in the conference, this could even be a single window with full screen layout. The camera view also allows a wide aspect ratio window to be used, such as in the layout illustrated below. For the wide viewing windows, the top and bottom of the OTX, TPX, ATX 200, and ATX 300 view are cropped, but the people are still visible.

Polycom, Inc. 10

Sample Layout Showing Wide Aspect Ratio Views

Multipoint Best Practices

You can use any of the cameras in the OTX, TPX, ATX 200, or ATX 300 room as the source for video from the room. However, to achieve optimal eye contact, choose the camera closest to the display where the other site’s people are seen.

For example, suppose TPX site A is viewing site B on the left display (codec number 2). When choosing the layout for site B, use the video from the right camera (codec number 3) in the TPX room because camera

3 is closest to display 2.

TPX 306M Framing Example Illustrating Optimal Eye Contact

Recording Telepresence Conferences

With MLA, you can use the Polycom RSS™ 2000 Single Point Recording feature with the RealPresence

Collaboration Server 4000 or 2000 to easily record ITP conferences.

When an ITP conference that is under management by the MLA has recording enabled, the recorded video on the RSS 2000 will feature the layout view normally sent to a one-screen, traditional video conferencing system. The remaining sites in the conference will see the layout that they would typically see if recording was not enabled.

Polycom, Inc. 11

Multipoint Best Practices

Multiple Cascade Links

Multi-codec telepresence conferences are not supported across cascaded RealPresence Collaboration

Server links. However, an RealPresence Collaboration Server 4000 or 2000 that is hosting a telepresence conference can be cascaded to another RealPresence Collaboration Server 4000 or 2000 conference with traditional endpoints. From the perspective of the telepresence conference, the video source from the cascaded link will be treated as a traditional endpoint. Note that this feature is not currently supported in

DMA.

Other Considerations

Note the following considerations regarding multipoint conferences:

● When participants drop out of a multipoint call, the remaining sites must be re-framed to account for the change in the number of codecs. If you have configured the MLA to automatically apply layouts for your conference, MLA will re-frame the sites for you.

● If one of the HDX codecs at a telepresence site inadvertently becomes disconnected from a multipoint call, you may have to disconnect all of the remaining HDX codecs from that site in order to reconnect properly. This is because the system can be configured to disallow incoming calls to the

HDX codecs when one or more of the codecs is in a call. For more information, refer to the Do Not

Disturb timer information in the Polycom Immersive Telepresence (ITP) Administrator’s Guide.

● When using the MLA user interface with an ATX 200 or ATX 400 system:

 The MLA treats ATX 200 systems the same way as TPX 204 systems. Therefore, the MLA user interface will display ATX 200 systems as site type TPX 204. Additionally, if you create a layout template for an ATX 200 system, you must select TPX 204 as the Type.

 The MLA treats ATX 400 systems the same way as RPX 400 systems. Therefore, the MLA user interface will display ATX 400 systems as site type RPX 400. Additionally, if you create a layout template for an ATX 400 system, you must select RPX 400 as the Type.

Polycom, Inc. 12

Configuring RealPresence Collaboration

Server Settings for ITP Systems

This chapter lists the RealPresence Collaboration Server settings for:

● 1080p HD video

● 720p/60 HD video

● 720p/30 HD video

In addition, this chapter lists the other RealPresence Collaboration Server settings that you should configure, as well as the settings you should configure for large conferences.

For ITP systems using HDX codecs, the ITP Meeting Composer dialing mechanism does not take advantage of DMA load balancing with a pool of RealPresence

Collaboration Servers. The ITP endpoint is pre-configured to use a particular

RealPresence Collaboration Server. Refer to the Polycom DMA 7000 System

Getting Started Guide or the Polycom DMA 7000 System Operations Guide for more information.

For ITP systems using RealPresence Group Series codecs, the system uses DMA for Meeting Composer and load balancing is supported.

Configuring the RealPresence Collaboration Server

Settings for 1080p HD Video

1080p HD video requires MPMRx hardware for RealPresence Collaboration Server running software version 8.6 or MPMx hardware for RealPresence Collaboration Server running software version 8.5. In addition, you must use one of the RealPresence Collaboration Server versions shown in the Polycom

Immersive Telepresence (ITP) Release Notes or Polycom RealPresence Immersive Studio Release Notes.

Polycom, Inc. 13

Configuring RealPresence Collaboration Server Settings for ITP Systems

You must also use one of the HDX software versions shown in the Polycom Immersive Telepresence (ITP)

Release Notes or one of the Group Series software versions shown in the Polycom RealPresence

Immersive Studio Release Notes.

By configuring the RealPresence Collaboration Server settings as described in this section, the

RealPresence Collaboration Server will send the following:

● 1080p HD resolution continuous presence video to endpoints that support 1080 resolution.

● 720p/30 HD resolution continuous presence video to endpoints that support 720 resolution. Lower resolution is provided to lower resolution endpoints.

You might see occasional video stuttering (jerkiness) when using this conference profile on a RealPresence Collaboration Server with MPMx or MPMRx hardware.

Polycom, Inc. 14

Configuring RealPresence Collaboration Server Settings for ITP Systems

1080p HD Video Conference Profile Settings

This setting....

General

Advanced

Gathering Settings

Video Quality

Video Settings

Skins

IVR

Recording

Line Rate

High Definition Video Switching

Operator Conference

LPR

Encryption

Should be set to...

4096 Kbps (3072 Kbps for

MPMRx if all ITP systems in the call are enabled for H.264 High

Profile)

Unchecked

Unchecked

Checked

Optional

Auto Terminate

Echo Suppression

Keyboard Suppression

Enable Gathering

People Video: Video Quality

People Video: Video Clarity

Content Video: Content Settings

Content Video: Content Protocol

Telepresence Mode

Telepresence Layout Mode

All other check boxes

Optional

Checked

Optional

Optional

Motion

Unchecked

Optional

Up to H.264 high profile

Auto

Continuous Presence

Unchecked

Not Applicable

(If desired, create an IVR service that disables the video splash screen and audio greetings.

NOTE: If you are planning to include OTX, TPX, or ATX systems, you must create an IVR service that disables the video splash screen and audio greetings.

There is a known issue where the interaction of IVR and 16:9 displays results in video with an incorrect aspect ratio on the 16:9 display.)

Conference Requires Chairperson Optional

Optional

Polycom, Inc. 15

Configuring RealPresence Collaboration Server Settings for ITP Systems

When configuring the RealPresence Collaboration Server settings for 1080p HD video, note the following:

● Beginning with RealPresence Collaboration Server Version 7.0.2 there is a new system flag,

ITP_CERTIFICATION. This flag must be set to YES. Note that in order for the RealPresence

Collaboration Server to support ITP, the customer must purchase the RealPresence Collaboration

Server Telepresence License.

For more information about configuring RealPresence Collaboration Server system flags, refer to the

Polycom RealPresence Collaboration Server Administrator’s Guide.

● You should validate that the parameter Maximum CP Resolution (system wide) and Maximum

Resolution (conference profile) are set to HD1080 for the 1080p HD profile. (HD1080 is the default setting.)

For more information about setting this flag for large conferences, see

Configuring RealPresence

Collaboration Server Settings for Large Conferences .

Polycom, Inc. 16

Configuring RealPresence Collaboration Server Settings for ITP Systems

Configuring the RealPresence Collaboration Server

Settings for 720p/60 HD Video

720p/60 HD video MPMRx hardware for RealPresence Collaboration Server running software version or

8.6 or MPMx hardware for RealPresence Collaboration Server running software version 8.5. In addition, you must use one of the RealPresence Collaboration Server versions shown in the Polycom Immersive

Telepresence (ITP) Release Notes or Polycom RealPresence Immersive Studio Release Notes.

You must also use one of the HDX or RealPresence Group Series software versions as shown in the

Polycom Immersive Telepresence (ITP) Release Notes or Polycom RealPresence Immersive Studio

Release Notes.

By configuring the RealPresence Collaboration Server settings as described in this section, the

RealPresence Collaboration Server will send the following:

● 720p/60 HD resolution continuous presence video to ITP sites with HDX 8000 Series codecs and with

RealPresence Group Series codecs.

● SD/60 resolution continuous presence video to ITP sites with HDX 9004 codecs (RPX sites receive

4SIF 4:3 aspect ratio at 60 fps; TPX sites receive 720x400 16:9 aspect ratio at 60 fps).

Polycom, Inc. 17

Configuring RealPresence Collaboration Server Settings for ITP Systems

You might see occasional video stuttering (jerkiness) when using this conference profile on a RealPresence Collaboration Server with MPMx or MPMRx hardware.

720p/60 HD Video Conference Profile Settings

This setting...

General Line Rate

Advanced

Gathering Settings

Video Quality

Video Settings

High Definition Video Switching

Operator Conference

LPR

Encryption

Auto Terminate

Echo Suppression

Keyboard Suppression

Enable Gathering

People Video: Video Quality

Content Video: Content Settings

Content Video: Content Protocol

Telepresence Mode

Telepresence Layout Mode

All other check boxes

Skins

Should be set to...

4096 Kbps (3072 Kbps for

MPMRx if all ITP systems in the call are enabled for H.264 High

Profile)

Unchecked

Unchecked

Checked

Optional

Optional

Checked

Optional

Optional

Motion

Optional

Up to H.264 high profile

Auto

Continuous Presence

Unchecked

Not Applicable

Polycom, Inc. 18

Configuring RealPresence Collaboration Server Settings for ITP Systems

This setting...

IVR

Should be set to...

(If desired, create an IVR service that disables the video splash screen and audio greetings.

NOTE: If you are planning to include OTX, TPX, or ATX systems, you must create an IVR service that disables the video splash screen and audio greetings. There is a known issue where the interaction of IVR and 16:9 displays results in video with an incorrect aspect ratio on the 16:9 display.)

Conference Requires Chairperson Optional

Optional Recording

When configuring the RealPresence Collaboration Server settings for 720p/60 HD video, note the following:

● The system flag, ITP_CERTIFICATION must be set to YES.

For more information about configuring RealPresence Collaboration Server system flags, refer to the

Polycom RealPresence Collaboration Server Administrator’s Guide.

● You should validate that the parameter Maximum CP Resolution (system wide) and Maximum

Resolution (conference profile) are set to either HD720 or HD1080 for the 720p/60 HD conference profile.

For more information about setting this flag for large conferences, see

Configuring RealPresence

Collaboration Server Settings for Large Conferences .

Polycom, Inc. 19

Configuring RealPresence Collaboration Server Settings for ITP Systems

Configuring the RealPresence Collaboration Server

Settings for 720p/30 HD Video

720p/30 HD video is supported on all RealPresence Collaboration Server hardware platforms. However, you must use one of the RealPresence Collaboration Server versions shown in the Polycom Immersive

Telepresence (ITP) Release Notes or Polycom RealPresence Immersive Studio Release Notes.

You must also use one of the HDX or RealPresence Group Series software versions shown in the Polycom

Immersive Telepresence (ITP) Release Notes or Polycom RealPresence Immersive Studio Release Notes.

By configuring the RealPresence Collaboration Server settings as described in this section, the

RealPresence Collaboration Server will send the following:

● 720p/30 HD resolution continuous presence to all ITP sites except those described in the following bullet.

● 1080p video to H.264 High Profile-enabled ITP sites connecting to the RealPresence Collaboration

Server.

Polycom, Inc. 20

Configuring RealPresence Collaboration Server Settings for ITP Systems

720p/30 HD Video Conference Profile Settings

This setting...

General

Advanced

Gathering Settings

Video Quality

Line Rate

High Definition Video Switching

Operator Conference

LPR

Encryption

Auto Terminate

Echo Suppression

Keyboard Suppression

Enable Gathering

People Video: Video Quality

People Video: Video Clarity

Content Video: Content Settings

Content Video: Content Protocol

Should be set to...

1920 Kbps

Unchecked

Unchecked

Checked

Optional

Optional

Checked

Optional

Optional

Sharpness

Unchecked

Optional

Up to H.264 high profile

Polycom, Inc. 21

Configuring RealPresence Collaboration Server Settings for ITP Systems

This setting...

Video Settings

Skins

IVR

Telepresence Mode

Telepresence Layout Mode

All other check boxes

Should be set to...

Auto

Continuous Presence

Unchecked

Not Applicable

(If desired, create an IVR service that disables the video splash screen and audio greetings.

NOTE: If you are planning to include

OTX, TPX, or ATX systems, you must create an IVR service that disables the video splash screen and audio greetings. There is a known issue where the interaction of

IVR and 16:9 displays results in video with an incorrect aspect ratio on the 16:9 display.)

Conference Requires Chairperson Optional

Optional Recording

When configuring the RealPresence Collaboration Server settings for 720p/30 HD video, note the following:

● Beginning with RealPresence Collaboration Server Version 7.0.2 there is a new system flag,

ITP_CERTIFICATION. This flag must be set to YES.

For more information about configuring RealPresence Collaboration Server system flags, refer to the

Polycom RealPresence Collaboration Server Administrator’s Guide or Polycom RealPresence

Immersive Studio Administrator’s Guide.

● You should validate that the system flag Maximum CP Resolution (system wide) and Maximum

Resolution (conference profile) are set to either HD720 or HD1080 for the 720p/30 HD conference profile. You can limit some of the conferences to CIF/SD if the limitation is only at conference profile.

For more information about setting this flag for large conferences, see

Configuring RealPresence

Collaboration Server Settings for Large Conferences .

Polycom, Inc. 22

Configuring RealPresence Collaboration Server Settings for ITP Systems

Configuring Other RealPresence Collaboration Server

Settings

This section lists other RealPresence Collaboration Server settings that you should set.

RealPresence Collaboration Server Settings

This setting...

RealPresence Collaboration Server LAN connection to network switch or router

HDX LAN connection to network switch or router

Address Book

IVR

(If desired, create an IVR service that disables the video splash screen and audio greetings.)

Name

Should be set to...

1 Gbps (not 100 Mbps)

100 Mbps or 1 Gbps

Use the naming convention

described in the Naming Sites section on page 10

, with a common name for each HDX codec at a telepresence site followed by the numeral 1, 2, 3, or 4

Enable Welcome Messages Unchecked

Enable Chairperson

Messages

Unchecked

Unchecked Enable Password

Messages

Enable Roll Call Unchecked

Click & View Unchecked

Optionally, if you do not want the “on hold” music to be heard at the participating sites, set the system flag

IVR_MUSIC_VOLUME to 0, and the music will not be heard.

When configuring the RealPresence Collaboration Server settings for Immersive Telepresence systems with MLA, note the following:

● The system flag, PRESERVE_PARTY_CELL_ON_FORCE_LAYOUT should be set to YES. This flag indicates that forced parties in personal layouts will display as blank cells if video stops.

For more information about configuring RealPresence Collaboration Server system flags, refer to the

Polycom RealPresence Collaboration Server Administrator’s Guide.

Configuring RealPresence Collaboration Server

Settings for Large Conferences

For very large conferences, with the total number of ITP participants approaching the resource capacity limits, you will need to configure the RealPresence Collaboration Server to use a lower video resolution. For

Polycom, Inc. 23

Configuring RealPresence Collaboration Server Settings for ITP Systems more information on resource capacity refer to the RealPresence Collaboration Server hardware guides at support.polycom.com

.

Configure the RealPresence Collaboration Server as described in the previous sections except for the following:

● For SD30 resolution, use the parameter Maximum CP Resolution = SD30.

Additionally in the conference profile, set Video Quality = Sharpness and Line Rate = 384Kbps.

Higher line rates may result in the RealPresence Collaboration Server sending 2CIF instead of SD30.

● For CIF resolution, use the parameter Maximum CP Resolution = CIF.

Content video will have a low frame rate.

Polycom, Inc. 24

Multipoint Framing Scenarios for

Immersive Telepresence

This appendix contains diagrams that illustrate many supported framing combinations for multipoint conferences on an RealPresence Collaboration Server 4000 or 2000 multimedia conference platform with

RPX, OTX, TPX, and ATX suites in the same conference. All of these scenarios are currently supported by the automatic layout features in MLA. All scenarios are supported at:

● 1080p/30, 720p/60, or 720p/30 when running on RealPresence Collaboration Server 4000 or 2000 with MPM+ and MPMx. Note that MPM+ is only supported with RealPresence Collaboration Server versions earlier than 8.1 and is not supported with RealPresence Immersive Studio.

With the introduction of additional ITP system models such as TPX HD 204M, OTX, ATX, and RealPresence

Immersive Studio, the number of multipoint framing combinations involving all types of telepresence suites increased dramatically. Therefore, every framing scenario is not shown in this appendix. For example, every scenario that includes a TPX HD 306M has not been updated to show corresponding TPX HD 204M layout views.

When framing combinations that are not shown in this appendix, you should follow these Polycom principles of multipoint design:

1

Every seat should be seen at all times.

2

You should try to align the most important sites around middle of the screens to provide the best possible eye contact for those sites.

These principles have been adopted by MLA when automatically generating multipoint layouts for scenarios not listed in this appendix.

Many of the scenarios listed in this appendix include a representative full room view of a TPX system. However, TPX systems with Eagle Eye 1080 cameras capture only the center four seats, not all six, when showing the full room view.

TPX systems with Eagle Eye HD or Eagle Eye II cameras show the outer two seats partially obscured from view.

Although some ITP systems are not shown in this appendix, the scenarios shown for RPX 400 systems are equivalent to ATX 400 systems, TPX 306M systems are equivalent to OTX 300 and ATX 300 systems, TPX 204 systems are equivalent to ATX 200 systems, and OTX 100 systems are equivalent to HDX systems.

Polycom, Inc. 25

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 26

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 27

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 28

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 29

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 30

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 31

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 32

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 33

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 34

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 35

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 36

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 37

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 38

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 39

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 40

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 41

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 42

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 43

Multipoint Framing Scenarios for Immersive Telepresence

Category G: RPX 400 PARTICIPANTS

Scenario 1: RPX 400 to HDX - MCU recommended

HDX

HDX View

Scenario 1a: RPX 400 to HDX - point to point, no MCU

HDX

HDX View

Only center right side of RPX 400 room seen

Scenario 2: 2 RPX 400s - point to point; no MCU

Polycom, Inc. 44

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 45

Multipoint Framing Scenarios for Immersive Telepresence

Layout scenarios 6 through 10 are available in 720p/30 HD on RealPresence Collaboration Server with

MPM+ only. Layout Scenario 11 is available at SD on RealPresence Collaboration Server with MPM+.

Layout scenarios 6 through 11 can be used at SD/15fps on RealPresence Collaboration Server with MPM.

Polycom, Inc. 46

Multipoint Framing Scenarios for Immersive Telepresence

Layout scenarios 6 through 10 are available in 720p/30 HD on RealPresence Collaboration Server with

MPM+ only. Layout Scenario 11 is available at SD on RealPresence Collaboration Server with MPM+.

Layout scenarios 6 through 11 can be used at SD/15fps on RealPresence Collaboration Server with MPM.

Polycom, Inc. 47

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 48

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 49

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 50

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 51

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 52

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 53

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 54

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 55

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 56

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 57

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 58

Multipoint Framing Scenarios for Immersive Telepresence

Category J: RPX 400 and HDX PARTICIPANTS

Scenario 1: 2 RPX 400s, up to 2 HDXs

HDX

Scenario 2: 2 RPX 400s, 3 or 4 HDXs

HDX

Scenario 3: 2 RPX 400s, 5 HDXs

HDX

HDX

HDX

Scenario 4: 2 RPX 400s, 6 HDXs

HDX

HDX HDX

HDX

HDX

HDX

HDX HDX

HDX

HDX

HDX

HDX

Polycom, Inc. 59

Multipoint Framing Scenarios for Immersive Telepresence

Category J: RPX 400 and HDX PARTICIPANTS

Scenario 5: 2 RPX 400s, 7 HDXs

HDX HDX HDX

HDX

Scenario 6: 2 RPX 400s, 8 HDXs

HDX

HDX

HDX

Scenario 7: 2 RPX 400s, 9 HDXs

HDX

HDX

HDX

Scenario 8: 2 RPX 400s, 10 HDXs

HDX

HDX

HDX

HDX

HDX

HDX

HDX

HDX

HDX

HDX

HDX

HDX

HDX

HDX HDX HDX HDX HDX

HDX

HDX

HDX

HDX

HDX

HDX

Polycom, Inc. 60

Multipoint Framing Scenarios for Immersive Telepresence

Category J: RPX 400 and HDX PARTICIPANTS

HDX View: Scenarios 1-8

HDX HDX HDX HDX

RPX participant video is zoomed and cropped to fill screen as seen below.

HDX HDX HDX HDX

Scenario 9: 3 RPX 400s, up to 2 HDXs

HDX

Scenario 10: 3 RPX 400s, 3 HDXs

HDX

HDX

Scenario 11: 3 RPX 400s, 4 HDXs

HDX

HDX HDX

HDX

HDX

HDX

Polycom, Inc. 61

Multipoint Framing Scenarios for Immersive Telepresence

Category J: RPX 400 and HDX PARTICIPANTS

Scenario 12: 3 RPX 400s, 5 HDXs

HDX

HDX

HDX

HDX

Scenario 13: 3 RPX 400s, 6 HDXs

HDX

HDX HDX

Scenario 14: 3 RPX 400s, 7 HDXs

HDX

HDX

HDX

HDX

HDX HDX

HDX HDX

Scenario 15: 3 RPX 400s, 8 HDXs

HDX

HDX HDX

HDX

HDX

HDX

HDX

HDX

HDX

HDX

HDX

Polycom, Inc. 62

Multipoint Framing Scenarios for Immersive Telepresence

Category J: RPX 400 and HDX PARTICIPANTS

HDX View: Scenarios 9-15

HDX HDX HDX HDX

Top and bottom of RPX 400 systems are slightly cropped.

Some HDX participants not seen (can only accommodate up to 5).

Scenario 16: 4 RPX 400s, up to 4 HDXs

HDX HDX HDX HDX

Scenario 17: 4 RPX 400s, 5 HDXs

HDX HDX

HDX HDX

Scenario 18: 4 RPX 400s, 6 HDXs

HDX

HDX HDX

HDX HDX HDX HDX

Layout scenarios 17 through 20 are available in 720p HD on RealPresence Collaboration Server with

MPM+ only. Layout scenarios 17 through 20 can be used at SD/15fps on RealPresence Collaboration

Server with MPM.

Polycom, Inc. 63

Multipoint Framing Scenarios for Immersive Telepresence

Category J: RPX 400 and HDX PARTICIPANTS

Scenario 19: 4 RPX 400s, 7 HDXs

HDX HDX HDX

HDX HDX

HDX HDX

Scenario 20: 4 RPX 400s, 8 HDXs

HDX HDX HDX HDX

HDX

HDX

HDX

HDX

HDX View: 4 RPX 400s - Scenarios 16 - 20

Top and bottom of RPX 400 systems are slightly cropped.

Other HDX participants not seen.

Layout scenarios 17 through 20 are available in 720p HD on RealPresence Collaboration Server with

MPM+ only. Layout scenarios 17 through 20 can be used at SD/15fps on RealPresence Collaboration

Server with MPM.

Polycom, Inc. 64

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 65

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 66

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 67

Multipoint Framing Scenarios for Immersive Telepresence

Polycom, Inc. 68

Multipoint Framing Scenarios for Immersive Telepresence

Category K: Voice Activated Room Switching (VARS) Layouts

Scenario 5a: RPX 400 speaker viewed on HDX

RPX participant video is zoomed and cropped to fill screen as seen below.

Scenario 5b: TPX 306 speaker viewed on HDX

Scenario 5c: RPX 200 speaker viewed on HDX

Scenario 5d: RPX 204 speaker viewed on HDX

Scenario 5e: HDX speaker viewed on HDX

HDX

Polycom, Inc. 69

Multipoint Framing Scenarios for Immersive Telepresence

Category L: TPX, 3 Screen, and HDX PARTICIPANTS

1 TPX, 2 3 Screens, 1 HDX (HDX View)

TPX

1 TPX, 2 3 Screens, 1 HDX (TPX View)

HDX

1 TPX, 2 3 Screens, 1 HDX (3 Screen View)

HDX

TPX

Polycom, Inc. 70

Manual Video Layout Framing Examples

This appendix illustrates sample personal layouts for multipoint conferences that you can manually frame.

However, Polycom recommends that you use the Multipoint Layout Application to automatically frame multipoint conferences.

In most cases, you should follow these guidelines:

● For multipoint conferences with only RPX suites: Either the two site side-by-side window layout option or the quad window layout option are typically suitable for framing the Suite.

● For multipoint conferences with both RPX and TPX suites in the same conference: Special window layout options are required, and these layouts are only available with RealPresence Collaboration

Server 4000 and 2000.

Example one: Multipoint meeting with three RPX HD 200 Series

Site records involved:

RPX 200 Boston 140 CommAve 1

RPX 200 Boston 140 CommAve 2

RPX 200 LA Tower 1

RPX 200 LA Tower 2

RPX 200 NY MadAve 10 th

FL 1

RPX 200 NY MadAve 10 th

FL 2

Once all sites are connected, each site must be manually framed as shown on the next slide using the MCU’s two site side-by-side window layout option

Polycom, Inc. 71

Manual Video Layout Framing Examples

Example one: Site framing for three R PX HD 200 Series suites

NY RPX

(

LEFT 2 ) (R IGHT 1)

Boston RPX

(

LE FT 2) (RIGHT 1 )

LA L EF T LA RIGHT

Boston RPX

(

L EFT 2) (RIGHT 1)

LA RPX

(

L EFT 2 ) (RIGHT 1)

N Y L EF T NY RI GHT

LA RPX

(

LEFT 2 ) ( RIGH T 1)

NY RPX

(

LE FT 2) (RIGH T 1 )

Bo sto n L EFT B osto n RIGH T

Polycom, Inc. 72

Manual Video Layout Framing Examples

Site records involved:

RPX 200 Boston 140 CommAve 1

RPX 200 Boston 140 CommAve 2

RPX 200 LA Tow er 1

RPX 200 LA Tow er 2

RPX 200 N Y MadAve 10th FL 1

RPX 200 N Y MadAve 10th FL 2

VSX 7000 Toronto

VSX 3000 Calgary

Polycom, Inc.

Once all sites are connected, each site must be manually framed as show n on the next slide using the MCU quad wind ow layo ut option

73

Manual Video Layout Framing Examples

Example Three: Site framing for three RPX HD 200 Series suites and

(

2)

(

2) (1)

(

2 )

(

2 ) ( 1)

(

2)

(

2) (1)

(

2 )

(

2 )

Polycom, Inc. 74

Manual Video Layout Framing Examples

Polycom, Inc. 75

ITP Compatibility History (Version 3.1.0 and Earlier)

This appendix includes compatibility information for versions 3.1.0 and earlier. For information about versions newer than 3.1.0, refer to the ITP Release Notes for the specific version or the current Polycom

Supported Products matrix located at

PolycomService/support/us/support/service_policies.html

.

ITP Compatibility History

History of ITP and RealPresence Collaboration Server Software Compatibility

ITP Software

Version

Version 3.1.0

Version 3.0.5

Version 3.0.3

Version 3.0.2

Version 3.0.1

Version 2.7.1

Version 2.7

Version 2.6

Version 2.5

Version 2.0.3

Version 1.5

ATX SDK

Software

Version

Version 3.1.0

Version 3.0.5

6.0.1

RealPresence Collaboration Server Software Version

6.0.1

7.0.2

7.1.0

7.2.0

7.2.1

7.2.1.

25

7.2.2.

64

7.6.0.

170 7.6.1

7.7.0

7.8.0

  

  

       

   

   

     

   

— —

  

  

 

 

7.0.2

7.1.0

7.2.0

7.2.1

7.2.1.

25

7.2.2.

64

7.6.0.

170 7.6.1

7.7.0

7.8.0

  

 

Polycom, Inc. 76

ITP Compatibility History (Version 3.1.0 and Earlier)

ITP Software

Version

Version 3.1.0

Version 3.0.5

Version 3.0.3

Version 3.0.2

Version 3.0.1

Version 2.7.1

Version 2.7

Version 2.6

Version 2.5

Version 2.0.3

Version 1.5

ATX SDK

Software

Version

Version 3.0.3

Version 2.0.2

Version 2.0 and 2.0.1

Version 1.1

Version 1.0

RealPresence Collaboration Server Software Version

6.0.1

7.0.2

7.1.0

7.2.0

7.2.1

7.2.1.

25

7.2.2.

64

7.6.0.

170 7.6.1

7.7.0

7.8.0

  

  

       

   

   

     

   

— —

  

  

 

 

6.0.1

7.0.2

7.1.0

7.2.0

7.2.1

7.2.1.

25

7.2.2.

64

7.6.0.

170 7.6.1

7.7.0

      

— — —

  

   

— —

7.8.0

Polycom, Inc. 77

History of ITP and CMA Software Compatibility

ITP Software Version

Version 3.1.0

Version 3.0.5

Version 3.0.3

Version 3.0.2

Version 3.0.1

Version 2.7.1

Version 2.7

5.0.0

5.3.0

CMA Software Version

5.4.0

5.5

History of ITP and DMA Software Compatibility

ITP Software Version

Version 3.1.0

Version 3.0.5

Version 3.0.3

4.0

DMA Software Version

4.0.x

5.0

ITP Compatibility History (Version 3.1.0 and Earlier)

6.0.1

Polycom, Inc. 78

ITP Compatibility History (Version 3.1.0 and Earlier)

ITP Software Version Matrices

Software Versions Used with ITP 3.1.0

Product

RPX

OTX

TPX 306M

ATX 300

ATX SDK

HDX

®

Software

Version

3.1.0-23277

3.1.0-23277

3.1.0-23277

3.1.0-23277

3.1.0-23277

Crestron

Software

Version

RPX_3.1-3

TPX_3.1-3

TPX_3.1-3

TPX_3.1-3

ITP 3.1.0

Polycom

Telepresence

Tool

Version

3.1.0.0

3.1.0.0

3.1.0.0

3.1.0.0

3.1.0.0

Polycom

Touch Control Operating System

Version

1.6.0-29

1.6.0-29

1.6.0-29

1.6.0-29

Polycom

Touch Control Applications

Version

1.6.0-69

1.6.0-69

1.6.0-69

1.6.0-69

Polycom

Multipoint

Layout

Application (MLA)

Version

3.0.5.4

3.0.5.4

3.0.5.4

3.0.5.4

3.0.5.4

Software Versions Used with ITP 3.0.5

Product

RPX

OTX

TPX 306M

ATX 300

ATX SDK

HDX

®

Software

Version

3.0.5-22695

3.0.5-22695

3.0.5-22695

3.0.5-22695

3.0.5-22695

Crestron

Software

Version

RPX_3.0.5-2

TPX_3.0.5-2

TPX_3.0.5-2

TPX_3.0.5-2

ITP 3.0.5

Polycom

Telepresence

Tool

Version

3.0.5.4

3.0.5.4

3.0.5.4

3.0.5.4

3.0.5.4

Polycom

Touch Control Operating System

Version

1.5.0-18

1.5.0-18

1.5.0-18

1.5.0-18

Polycom

Touch Control Applications

Version

1.5.0-60

1.5.0-60

1.5.0-60

1.5.0-60

Polycom

Multipoint

Layout

Application (MLA)

Version

3.0.5.4

3.0.5.4

3.0.5.4

3.0.5.4

3.0.5.4

Polycom, Inc. 79

ITP Compatibility History (Version 3.1.0 and Earlier)

Software Versions Used with ITP 3.0.3

Product

RPX

OTX

TPX 306M

ATX 300

ATX SDK

HDX

Software

Version

3.0.3-14451

3.0.3-14451

3.0.3-14451

3.0.3-14451

3.0.3-14451

Crestron

Software

Version

RPX_3.0.3-4

TPX_3.0.3-4

TPX_3.0.3-4

TPX_3.0.3-4

ITP 3.0.3

Polycom

Telepresence

Tool

Version

3.0.3.5

3.0.3.5

3.0.3.5

3.0.3.5

3.0.3.5

Polycom

Touch Control Operating System

Version

1.3.0-17

1.3.0-17

1.3.0-17

1.3.0-17

Polycom

Touch Control Applications

Version

1.3.0-103

1.3.0-103

1.3.0-103

1.3.0-103

Polycom

Multipoint

Layout

Application (MLA)

Version

3.0.3.5

3.0.3.5

3.0.3.5

3.0.3.5

3.0.3.5

Software Versions Used with ITP 3.0.2

Product

RPX

OTX

TPX 306M

ATX 300

ATX SDK

HDX

Software

Version

Crestron

Software

Version

3.0.2-11176 RPX_3.0.2-2

3.0.2-11176 TPX_3.0.2-2

3.0.2-11176 TPX_3.0.2-2

3.0.2-11176 TPX_3.0.2-2

3.0.2-11176 —

ITP 3.0.2

Polycom

Telepresence

Tool

Version

3.0.2.5

3.0.2.5

3.0.2.5

3.0.2.5

3.0.2.5

Polycom

Touch Control Operating System

Version

1.2.0.65

1.2.0.65

1.2.0.65

Polycom

Touch Control Applications

Version

1.2.0.38

1.2.0.38

1.2.0.38

Polycom

Multipoint

Layout

Application (MLA)

Version

3.0.1.3

3.0.1.3

3.0.1.3

3.0.1.3

3.0.1.3

Polycom, Inc. 80

ITP Compatibility History (Version 3.1.0 and Earlier)

Software Versions Used with ITP 3.0.1

Product

RPX

OTX

TPX 306M

ATX 300

ATX SDK

HDX

Software

Version

3.0.1-10628

3.0.1-10628

3.0.1-10628

3.0.1-10628

Crestron

Software

Version

RPX_3.0.1-3

TPX_3.0.1-4

TPX_3.0.1-4

TPX_3.0.1-4

ITP 3.0.1

Polycom

Telepresence

Tool

Version

3.0.1.5

3.0.1.5

3.0.1.5

3.0.1.5

Polycom

Touch Control Operating System

Version

1.0.3-17

1.0.3-17

1.0.3-17

Polycom

Touch Control Applications

Version

1.1.0.73

1.1.0.73

1.1.0.73

Polycom

Multipoint

Layout

Application (MLA)

Version

3.0.1.3

3.0.1.3

3.0.1.3

3.0.1.3

Software Versions Used with ITP 2.7.1

Product

RPX

OTX

TPX 306M

ATX 300

ATX SDK

HDX

Software

Version

ITP271-5267

ITP271-5267

ITP271-5267

ITP271-5267

ITP271-5267

Crestron

Software

Version

RPX_2.7.1-1

TPX_2.7.1-3

TPX_2.7.1-3

TPX_2.7.1-3

ITP 2.7.1

Polycom

Telepresence

Tool

Version

2.7.1.1

2.7.1.1

2.7.1.1

2.7.1.1

2.7.1.1

Polycom

Touch Control Operating System

Version

Polycom

Touch Control Applications

Version

Polycom

Multipoint

Layout

Application (MLA)

Version

2.7.1.1

2.7.1.1

2.7.1.1

2.7.1.1

2.7.1.1

Polycom, Inc. 81

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals