advertisement
Community
Application Solutions
iHP1296
12-INCH, LARGE FORMAT 2-WAY, INSTALLATION LOUDSPEAKER
♦ Theatre/Auditoria.
♦ Houses of Worship.
♦ Dance Clubs/Discotheques.
♦ Live Sound Reinforcement.
♦ Multi-Use Sports Facilities & Stadiums.
♦ Audio Visual. iHP1296 OPTIONS
“W” suffix
“U” suffix
“P” suffix
White paint finish with white grille and hardware
Unfinished with black grille and hardware
Portable version with built-in handles, rubber feet and stacking cups on four recessed corner mounting points
♦ 90° x 60° Rotatable Horn Pattern.
♦ Large format waveguide delivers excellent pattern control.
♦ 1.4” (36 mm) Exit / 2.87” (72.2mm) VC
HF Device.
♦ 12” (300mm) LF Device.
♦ Passive and Biamp Operating Modes.
♦ (23) Load-rated M10 Rigging Points.
♦ (4) M8 Omnimount™ 120 inserts.
♦ Robust Tuf-Coat™ Finish.
♦ Dual NL4-compatible locking connectors and Barrier Strip Inputs.
The iHP1296 is a premium quality, large format, full range loudspeaker system. The driver complement consists of a 12” (300mm) high power low frequency driver and a 1.4” (36mm) exit / 2.87” (72.2 mm) edgewound voice coil compression driver. The large format rotatable horn flare delivers well controlled 90˚ x 60˚ dispersion, and utilizes high order crossovers to minimize band overlap.
The well controlled off-axis response enhances system performance when combined with other iBOX Mid/Hi and subwoofer elements in clusters / arrays. The i112S and i212S subwoofer elements share the same cabinet profile and have been designed for integration with the iHP1296 for aesthetically pleasing clusters / arrays.
The iHP1296 can be used in both passive and bi-amp operating modes. The passive mode is designed to deliver outstanding performance without the use of a processor, while the bi-amp mode allows greater system flexibility. A compatible processor be used to enhance the LF response, provide a crossover function for use with iBOX subwoofer elements, and much more.
The rugged 13-ply Baltic birch enclosure is finished with Community’s new, robust, smooth Tuf-Coat™ finish. The enclosure also incorporates 23 load-rated M10 rigging points and 4 M8 Omnimount™ 120 inserts in the rear of the enclosure. Simple and flexible installation is achieved using optional hardware from an extensive range designed specifically for the iBOX series.
See the iBOX Hardware Guide for more details.
Community Professional Loudspeakers
333 East Fifth Street, Chester, PA 19013-4511 USA
610-876-3400 • Fax 610-874-0190 www.communitypro.com
iHP1296
12-INCH, LARGE FORMAT 2-WAY, INSTALLATION LOUDSPEAKER
Community
True to Specification
FULL-RANGE FREQUENCY RESPONSE
Resolution <500 Hz = 10 Hz, >500 Hz = 40 Hz, 1/8 octave smoothing
Loudspeaker Type:
Frequency Response (+/-4dB):
-10dB Point:
Max Input Ratings (Passive):
Max Input Ratings (Biamp):
2-Way full-range
80 Hz - 18 kHz
60Hz
RMS 600W, Program 1500W
LF: RMS 600W, Program 1500W @8 Ohms
HF: RMS 90W, Program 180W @8 Ohms
Recommended Power Amplifier:
Sensitivity 1W/1m:
Maximum Output:
Nominal Impedance:
Min Impedance:
Nominal -6dB Beamwidth:
1,200W to 1,800W @ 8 Ohms
98 dB SPL
126 dB SPL / 133 dB SPL (peak)
8 Ohms
7.1 Ohms
90° H x 60° V
Crossover Frequency: 1.5 kHz
Recommended Signal Processing: 60Hz 24dB / Octave High pass filter
Drivers:
Input Connection:
Controls:
Enclosure:
Mounting / Rigging Provisions:
Grille:
Optional Accessories:
Dimensions:
Weight:
Shipping Weight:
LF (1) 12"
HF (1) 2.87” VC/ 1.4" Exit
(2) NL4-compatible locking connectors
(4) Terminal Barrier Strip
Operating Mode Switch (Biamp / Passive)
13-ply Baltic birch
30° total pitch angle
(23) M10 flying / rigging inserts
(4) M8 Omnimount™ Inserts
Steel, foam backed.
Mounting / Rigging hardware - See the iBOX
Hardware Guide for more information.
Height: 30.42 in. / 773 mm
Width: 16.00 in. / 407 mm
Depth: 18.26 in. / 464 mm
85 lbs. / 38.6 kg
98 lbs. / 44.5 kg
1. Sensitivity: Free field pink noise measurement at 35 ft / 10.6 m at 50% power; extrapolated to 1 meter and an input of 2.83 volts RMS.
2. Watts: All wattage figures are calculated using the rated nominal impedance.
BEAMWIDTH
FREQUENCY IN HERTZ FREQUENCY IN HERTZ
The loudspeaker system shall be a two-way, full-range bass reflex trapezoidal design with one 12 in. (300 mm) LF driver and one 1.4 in. exit HF driver with a titanium diaphragm mounted to a 90° x 60˚ HF fiberglass horn. Drivers shall be connected to an integral crossover with a crossover frequency of 1.5 kHz. There shall be one four-terminal barrier strip and two NL4-compatible locking connectors. The terminal panel shall have a switch to select Biamp or Passive operating modes. The loudspeaker enclosure shall be 13-ply Baltic birch plywood and shall be fitted with 23 x M10 and 4 x M8 flying/rigging inserts and finished with Tuf-
Coat™. The front of the enclosure shall be fitted with a 16 gauge perforated steel grille backed with foam. The system shall have an amplitude response of 80 Hz to 18 kHz (+/- 4 dB), input capability of 69V RMS, 98 dB sensitivity at one meter and 2.83V / 8 ohms nominal impedance. The nominal dispersion shall be 90° H x
60° V from 1.5 kHz to 10 kHz. The loudspeaker shall be 30.42 in. (773 mm) H x 16.00 in. (407 mm) W(front) x 6.83 in. (173 mm) W(rear) x 18.26 in. (464 mm) D and weigh 85 lbs (38.6 kg).
Community Professional Loudspeakers
333 East Fifth Street, Chester, PA 19013-4511 USA
610-876-3400 • Fax 610-874-0190 www.communitypro.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project