Samsung YP-U2JQB/XAA Product specifications

this manual carefully to ensure proper use of the player and
For Your Safety Read
to avoid any danger or physical damage.
WARNING
Failing to heed the player instructions may cause serious injury.
Product Use
Improper use can result in explosion,
fire or electric shock.
Do not disassemble, repair
or modify this player on
your own.
Do not get the player wet
or drop it in water.
If the player gets wet, do not
switch it on. Contact a Service
Center.
Do not place the player in
damp, dusty or sooty areas,
as it could result in fire or
electric shock.
Do not leave the player in
areas above 35°C(95°F)
(such as a sauna or inside
a parked car).
During hot weather, the
temperature inside a car may
rise up to 80°C(176°F).
2
To avoid your hearing damage
Avoid using your player at
high volume levels, as it may
result in permanent
hearing damage.
If you experience ringing in
your ears while using the
earphone, remove the
earphone immediately and
lower the volume.
To avoid a risk of traffic accident
Do not use the earphones while you are
driving a bicycle, automobile or motorcycle.
It can cause a serious accident and furthermore,
is prohibited by law in some areas.
Using the earphones while walking, in particular,
on a crosswalk, can lead to a serious accident.
Take care not to tangle the earphone cable
around your arms or neighboring objects
while driving, working out or walking, as it
could result in a car accident or other
injuries.
Failure to follow all instructions lead to physical injuries or damage to the player.
Product Use
Management of Important Data
Be sure to back up
important data.
Please be aware that we
claim no responsibility for
damage from data loss due
to breakdown, repair or other
causes.
Avoid malfunction
Do not cause excessive
impact on the player by
dropping it. Do not place
heavy objects on top of the
player.
Prevent any foreign
particles or dust from
entering into the player.
Avoid malfunction
Chapter 1. Preparation
CAUTION
Always use the accessories
provided by or approved by
Samsung.
Do not spray water on the
player. Never clean the
player with chemical
substances such as
benzene or thinner, as it may
cause fire, electric shock or
deteriorate the surface.
Do not place the player near
magnetic objects, as it may
cause a malfunction.
3
Contents
For Your Safety ..........................................2
Contents .......................................................4
Chapter 3. Multimedia function
Listening to Music ....................................22
Chapter 1. Preparation
Basic Information .......................................6
Components...............................................6
Screen Display Information........................9
Button Functions ......................................10
Charging the battery ................................12
Basic Use.................................................13
Chapter 2. Loading Your Desired File
Loading Your Desired File ......................16
Installing Samsung Media Studio ............16
Connecting to your PC.............................17
Adding Files/Folders in
Samsung Media Studio............................18
Transferring Files to the Player with
Samsung Media Studio............................20
4
Listening to Music ....................................22
Creating a Playlist Using
Samsung Media Studio............................26
To Play a Playlist......................................28
Using the Music Option Menu..................29
Photo Viewing ...........................................31
Photo Viewing ..........................................31
Using the Photo Option Menu..................32
Listening to FM Radio .............................33
Listening to FM Radio..............................33
Setting FM Presets ..................................36
To Delete Presets.....................................38
Setting FM Radio .....................................39
Chapter 4. Setting
Chapter 6. Appendix
Settings .......................................................40
Menu Tree ...................................................53
Product Specifications ............................54
Setting Alarm............................................40
Setting Display .........................................42
Setting Time ............................................44
Setting Language.....................................46
Setting the System ..................................47
Chapter 5. Troubleshooting
To Upgrade Firmware ..............................49
Troubleshooting ........................................51
5
Basic Information
Components
Checking the Accessories
Player
■
6
Earphones
AH59-01748A
USB Cable
AH39-00899A
Installation CD
AH80-00137A
Design of accessories is subject to change for the purpose of improvement, without notice.
Power &
Hold Switch
Components
Screen Display
Back Button
Chapter 1. Preparation
Front, Right Side and Top
All buttons are 'Light-touch' buttons.
Speaker
Button
Play/Pause &
Select Button
Menu Button
7
Basic Information
Components (Continued)
Bottom/Rear
USB
Connection
Port
Earphone
Jack
[Bottom]
[Rear]
Reset Hole
Earphone Connection
√ Bottom
Earphones
8
Basic Information
Screen Display Information
6
1
7
Normal
2
1.Life is cool
4
5
0002/0020
√ 00:02:20
8
9
1 Repeat Play Display
2 Equalizer
3 Music Information
6 Alarm Display
7 Battery Status Display
4 Play Status Bar
5 Current Music Number/
9 Play/Pause Display
8 Play Time Indicator
Total Number Display
■
NOTE
Components/Screen Display Information
3
Chapter 1. Preparation
Music
The screen pictures are for illustration purposes only. The actual screen may differ.
9
Basic Information
Button Functions
Buttons
Functions and Use
■
■
■
■
■
Slide and hold the button in the opposite direction of the arrow to turn the
power on/off.
Slide and release it in the arrow direction to lock the buttons.
Long tap to move to the main menu.
Short tap to move to the previous screen.
Moving up, down, left and right and Function Selection.
Tap to move up or down by one selection.
Tap to move left or right by one selection.
Press and hold to move up or down continuously.
Short tap to select the play/pause and function, move to the
next screen.
■
Search for a track and control volume while listening to music.
Press and hold to scan to a point on the current track.
Tap to move to the previous track or to play the current track
from the start.
Press and hold to scan to a point on the current track.
Tap and release to move to the next track.
Tap to reduce/increase the volume.
■
10
Tap to display the option menu.
on touch screen with your
fingertip.
Do not use any sharp object other than your fingers to operate the touch screen.
Otherwise, touch screen may be damaged.
■
Do not tap on the touch screen if your fingers are not clean.
Button Functions
■
CAUTION
Chapter 1. Preparation
✽ Tap
11
Charging the battery
Fully charge the rechargeable battery before using the
player for the first time or when it has not been used for a while.
the USB cable to the USB port
1 Connect
( ) on your PC.
the other end of the USB
2 Connect
cable to the USB Connection Port on
the bottom of the player.
■
When connected with the USB cable, it takes
about 4 hours for the player to fully charge
although this may vary depending on your PC
environment.
Battery Use
■
NOTE
12
■
Recharge and store within the temperature range
of 5°C~35°C(40°F~95°F).
■
Do not overcharge (longer than 12 hours).
Excessive charging or discharging may shorten
the battery’s life.
■
Battery life naturally shortens slowly over time.
If you are charging the player while it is connected to your Notebook, make sure the Notebook's
battery is also fully charged.
Basic Use
Turning the Power On
Slide and hold the [ HOLD √] switch in the opposite direction of
the arrow.
■
Turning the Power Off
Slide and hold the [ HOLD √] switch in the opposite direction of
the arrow again.
■
■
Power is turned off.
Power is automatically turned off when none of the buttons have been tapped for a preset
period of time (Default: 1 minute) in the pause mode. √ Page 44
Playing Music
1 Press and hold [ ] to move to the main menu.
2 Tap [ ] to select <Music> and then tap [ ].
Normal
■
1.Life is cool
√ 00:02:20
0002/0020
3 Use [
4 Tap [
■
■
NOTE
■
The Music Menu will appear.
] and [
Charging the battery/Basic Use
Music
NOTE
Power is turned on.
Chapter 1. Preparation
Turning the Power On & Off
] to select a music file of your choice.
].
The music file will begin playing.
Tap [
] to move to the previous screen.
Press and hold [
] to move to the main menu screen.
13
Basic Use (Continued)
Volume Control
Normal
Tap [
].
■
You will see a volume control icon.
■
Tap [
] to increase the volume or [
] to decrease it.
1.Life is cool
0002/0020
√ 00:02:20
Lock Function
Normal
In Hold mode, all buttons are disabled. This function is useful
when you are walking or jogging.
1 Slide the [ HOLD
1.Life is cool
0002/0020
14
√] switch in the direction of the arrow.
Slide the [ HOLD ] switch in the opposite direction of the
2 arrow
to release the Lock function.
√
√ 00:02:20
Slide the middle of the player in the arrow
direction while listening to music or the
radio.
You can listen to music through the speaker.
■
If you want to use the earphone for enjoying the
music, close the speaker by sliding back to the
original position.
■
Please position the player horizontally when using
the speaker.
■
If you close the slide panel, the speaker will shut off.
Normal
Basic Use
■
Chapter 1. Preparation
Using the Speaker
1.Life is cool
0002/0020
√ 00:02:20
Reset Function
Reset hole
If a player malfunction occurs, you can
re-initialize the system by pressing the
Reset hole.
Press the Reset hole at the rear of the
player with a pointed object such as a
safety clip.
■
The system will be initialized.
■
Your settings and files will not be affected.
15
Loading Your Desired File
Installing Samsung Media Studio
Before you start!
Use Media Studio to transfer music
files from your PC to the player.
Insert the installation CD provided with the player into the CD-ROM drive.
1 Click <Install now>.
2 Click <NEXT>.
■
Media Studio installation starts.
■
An icon is created on the desktop after
installation is complete and Media Studio
starts.
The K5 gives you freedom!
- Fill up your K5 now, free!
- Get Unlimited Downloads
- Choose from over 2 Million Songs
- Manage your existing MP3 Library with any of
these great music services
Choose a service and get your first 30
days on us.
16
Loading Your Desired File
Connecting to your PC
Before you start!
Use the USB Cable provided when connecting the player to your PC.
PC Requirements
The PC system must meet the following minimum specifications:
■
■
■
■
Pentium 300MHz or higher
DirectX 9.0 or higher
100MB of free hard disc space
Windows Media Player 10.0 or higher
■
CAUTION
■
■
■
■
Connecting to your PC
1 Connect the USB cable to the USB port ( ) on your PC.
Connect the other end of the USB cable to the USB Connection Port on the
2 bottom
of the player.
Chapter 2. Loading Your Desired File Installing Media Studio/
1
2
Windows XP Service Pack 2 or higher
USB Port 2.0
CD Rom Drive (2X or higher)
Resolution 1024 X 768 or higher
If you connect the player through a USB hub, the connection may be unstable. Please connect the
player to your PC directly.
17
Loading Your Desired File
Adding Files/Folders in Samsung Media Studio
Media Studio enables you to select and organize files and folders in preparation
for transfer to your player.
[YP-K5[MTP]]
[YP-K5
2
3
3
Please refer to Help for more information on how to use Media Studio.
■
18
Click <MENU> ➝ <Help> ➝ <Help> from the menu at the top of the Media Studio program.
Before you start!
■
■
Connect the player to your PC.
Media Studio must be installed on your PC.
■
If the program does not start automatically, double Click the Media Studio icon on the desktop.
2 Click the desired file icon.
■
■
Choose the file type you want to transfer by clicking on one of these icons.
represents a music file and
represents a photo.
Click
icon to display etc list. The ETC list includes file types (ex: TXT, XOV, etc) other than
music and photo files.
Samsung Media Studio
To add folders
3 Click <Add Folder> on the bottom of Media Studio.
■
The Open Folder window will appear.
4 Select the folder to add and click <OK>.
■
The selected folder is added to the list on the left side the
Media Studio Screen.
4
Chapter 2. Loading Your Desired File Adding Files/Folders in
1 Media Studio will automatically start when the player is connected to your PC.
To add files
3 Click <Add File> on the bottom of Media Studio.
■
The Open window will appear.
4 Select the files to add and click <Open>.
■
The selected files are added to the list.
4
19
Loading Your Desired File
Transferring Files to the Player with Samsung Media Studio
Perform the following steps to transfer files from your PC to the player.
2
[YP-K5[MTP]]
[YP-K5
3
4
Portable
window
■
Music recognition technology and related data are provided by Gracenote and
Gracenote CDDB® Music Recognition ServiceSM.
■
CDDB is a registered trademark of Gracenote. The Gracenote logo and logotype, the Gracenote
CDDB logo and logotype, and the "Powered by Gracenote CDDB" logo are
trademarks of Gracenote. Music Recognition Service and MRS are service marks of Gracenote.
NOTE
20
■
■
Connect the player to your PC.
Media Studio must be installed on your PC.
1 Media Studio will automatically start when the player is connected to your PC.
■
If the program does not start automatically, double click the Media Studio icon on the desktop.
2 Click the desired file icon.
■
Click
icon to display etc list. The ETC list includes file types (ex: TXT, XOV, etc) other than
music and photo files.
3 Select the file to transfer in the left file list.
4 Click icon.
■
The Selected file is transferred to the player.
■
Do not disconnect the USB cable during file transfer. This may cause damage to the player or your PC.
■
When transferring a photo file to the player using <Media Studio>, it is automatically converted into
JPG format before transfer. The file size is automatically adjusted, too.
■
A photo file that is transferred to the player without using <Media Studio> can look different from
the source on the screen of the player.
CAUTION
NOTE
Player with Samsung Media Studio
■
Choose the file type you want to transfer by clicking on one of these icons.
represents a music file and
represents a photo.
Chapter 2. Loading Your Desired File Transferring Files to the
Before you start!
21
Listening to Music
Listening to Music
Before you start!
Connect the earphones, then switch on the player, and check the battery.
E.g. Playing by Artist
1 Press and hold [
2 Tap [
■
] to move to the main menu.
] to select <Music> and then tap [
].
The Music Menu will appear.
Music
3 Tap [
] to select <Artists> and then tap [
].
1
2,3
■
NOTE
■
■
■
22
Music Menu
■ <Now Playing> : You can see information on the current song.
■ <Artists> : To play by artist
■ <Albums> : To play by album
■ <Tracks> : To play in numeric or alphabetical order
■ <Genres> : To play by genre
■ <Playlists> : To play by Playlist
The music files compatible with the player are MP3 and WMA .
MP1 or MP2 files which only have a changed extension to MP3, may not play on the player.
A file without an ID3 Tag is displayed as [Unknown].
Files with an ID3 tag will automatically be organized on the player by Artists, albums etc.
An ID3 tag is a hidden part of each music file and is used to categorize.
■
] to select an artist, then tap [
].
The albums for the artist will appear.
Now Playing
Artists
Tracks
5 Tap [
Genres
■
Albums
] to select an album, then tap [
].
The music files for the selected album will appear.
Playlists
6 Tap [
tap [
■
4,5,6
] to select a music file to play, then
].
The music will start playing.
Chapter 3. Multimedia Function Listening to Music
4 Tap [
Music
23
Listening to Music
Listening to Music (Continued)
To Pause
1 Tap [
■
2 Tap [
■
] again.
The music will play from the point where it stopped.
■
NOTE
] while the music is playing.
The music playback will be paused.
The screen Display window automatically turns off when none of the buttons have been tapped for a
preset period of time (Default: 1 minute) in the pause mode.
You can set the time duration before closing the screen display. √page 44
To search within a track
1 Press and hold [
■
] while the selected track is playing.
It searches to the beginning or the end of the track.
2 Release the button at the point you wish to start.
■
24
It starts playing from the point you release the button.
To Play from the beginning of the current track
Tap [
] after 3 seconds of play.
The current track starts playing from the beginning.
Chapter 3. Multimedia Function Listening to Music
■
To play the previous/next track
Tap [
■
] within 3 seconds of play.
The previous track will start playing.
Tap [
■
].
The next track will start playing.
■
CAUTION
When playing VBR files, the previous track may not play even if you tap [
3 seconds of play.
] within
25
Listening to Music
Creating a Playlist Using Samsung Media Studio
A playlist is a list of your favorite songs.
1
[YP-K5[MTP]]
3
3
2
1 Click <My Album> on the top of Media Studio.
■
The <My Album> window appears.
2 Click <New Album> on the bottom.
■
The Creation window appears.
3 Type in the album title and click <OK>.
26
■
A new album (playlist) will be created and stored in the My Album section of Media Studio.
Adding Music files to a Playlist
1 Click <My PC> on the top of Media Studio.
1
■
5
<My Album> in the right corner of the
2 Click
window.
■
The Album window appears.
3
files that you want to transfer in the
4 Select
<My PC> window.
Double click on a desired album in the right
window.
■
icon.
The selected files will be added to the album (playlist).
Exporting a Playlist to your Player Using Media Studio
1
3
2
4
1 Click <My Album> on the top of Media Studio.
<Portable> in the right corner of the
2 Click
window.
■
The <My Album> window appears.
■
The <Portable> window appears.
Samsung Media Studio
5 Click
Chapter 3. Multimedia Function Creating a Playlist Using
2
4
The <My PC> window appears. Click on <To Album>
to the right.
3 Select a desired album in the <My Album> list.
4 Click icon.
■
The selected album will be transferred to the player
and stored in <Navigation> ➝ <Playlists>.
27
Listening to Music
To Play a Playlist
Before you start!
Music
Now Playing
Artists
Albums
Tracks
Genres
For more information, see pages 26~27 to see how to create and transfer playlists
to your player.
1 Press and hold [ ] to move to the main menu.
2 Tap [ ] to select <Music> and then tap [ ].
■
The Music Menu will appear.
Playlists
3 Tap [
].
The Playlist(s) will appear.
■
If there is no playlist found, you will see a message of <No File> on the
screen.
4 Tap [
■
■
] to select the playlist of your choice, then tap [
The music files saved in the selected Playlist will appear.
5 Tap [
28
] to select <Playlists> and then tap [
■
] to select a music file to play, then tap [
The music file will start playing.
].
].
Listening to Music
Using the Music Option Menu
To select the sound effect
Different sound effects can be selected that enable you to enhance the music you
are listening to.
■
Sound Effect
Graphic EQ
Play Mode
Add to Alarm
2 Tap [
■
] to select <Sound Effect> and then tap [
].
The sound effect menu appears.
3 Tap [
■
] while listening to music.
The music option menu appears.
] to select the desired sound effect and then tap [
1 Tap [
■
Sound Effect
Graphic EQ
Play Mode
Add to Alarm
2 Tap [
■
■
■
NOTE
] to select <Graphic EQ> and then tap [
].
The graphic equalizer menu appears.
3 Tap [
■
] while listening to music.
The music option menu appears.
] to select <On> or <Off> and then tap [
].
<On>: The graphic equalizer will be displayed on the screen.
<Off>: The graphic equalizer will not be displayed on the screen.
The EQ cannot be adjusted.
Using the Music Option Menu
To select the graphic EQ display
Normal
].
You can select either <Normal> <Vocal> <Bass Boost> <3D Sound>
or <Concert Hall>.
Chapter 3. Multimedia Function To Play a Playlist/
1 Tap [
Normal
29
Listening to Music
Using the Music Option Menu (Continued)
To select the play mode
Normal
1 Tap [
■
Sound Effect
Graphic EQ
Play Mode
Add to Alarm
2 Tap [
■
] to select <Play Mode> and then tap [
].
The play mode menu appears.
3 Tap [
■
] while listening to music.
The music option menu appears.
] to select the desired mode and then tap [
].
You can select either <Normal> <Repeat One> <Repeat> or <Shuffle>.
■
■
■
■
<Normal> : To play all the tracks in order one time.
<Repeat One> : To repeat one file.
<Repeat> : To repeat all files.
<Shuffle> : To play files at random.
To add to alarm sound
You can add your favorite music file to the alarm sound list, so it can be heard the
next time the alarm goes off. See page 40 to set the alarm.
Normal
1 Tap [
■
Sound Effect
Graphic EQ
Play Mode
Add to Alarm
2 Tap [
3 Tap [
■
30
] while listening to music.
The music option menu appears.
] to select <Add to Alarm> and then tap [
] to select <Yes> and then tap [
].
].
The selected music will be added to the alarm sound list.
You can add only one music file at a time to the alarm sound list.
Photo Viewing
Photo Viewing
Before you start!
See pages 20-21 to transfer Photo files to your player.
and hold [
1 Press
menu.
[
■
Photo
] to select <Photo> and then tap
].
The Photo list will appear.
3 Tap [
] to select the photo file of
your choice, then tap [ ].
1
■
■
Slideshow Viewing
You can view you picture files in order as a
Slide show.
1 Tap [
■
■
NOTE
You will see thumbnail
photos if the appropriate
information is included in
the file.
For a file with no
information, you will
see
instead.
2
] in Photo Viewing mode.
The slideshow will start.
Tap [
] to stop the slideshow.
To view the previous / next photo
Tap [
■
Photo Viewing
1,2
2,3
The selected file will appear.
Large photos may take longer to display.
Chapter 3. Multimedia Function Using the Music Option Menu/
2 Tap [
] to move to the main
].
You can see the previous or next photo on the display.
31
Photo Viewing
Using the Photo Option Menu
To listen to music while viewing your photo
You can listen to the song that you last played while viewing your photo.
1 Tap [
■
] while viewing a photo.
The photo option menu appears.
2 Tap [
] to select <Background Music On> or <Background
Music Off>.
Background Mu
Add to Screen S
■
■
<Background Music On> : You can listen to the song that you last
played while viewing your photo.
<Background Music Off> : No background music is played while
viewing a photo.
To add a photo to the screen saver list
1 Select a photo file that you want to add to the screen saver list.
2 Tap [ ] while viewing a photo.
■
Background Mu
Add to Screen S
3 Tap [
[
■
■
NOTE
32
■
The photo option menu appears.
] to select <Add to Screen Saver> and then tap
].
The selected photo file is added to the list.
Select <Photo> from <Settings> → <Display> → <Screen Saver> and the selected photo is
displayed on the screen as a screen saver. √ page 43
If you reset the player, the screen saver will be initialized to <Analog Clock>.
Listening to FM Radio
Listening to FM Radio
Before you start!
Connect the earphones, then switch on the player, and check the battery.
2 Tap [
[
■
] to move to the main
] to select <FM Radio> and then tap
].
FM radio reception will start.
FM Radio
To use Mute function
Tap [
] while listening to the FM radio.
■
Sound is muted.
■
Tap [
] once again to hear sound.
2
■
CAUTION
Always connect your earphones to the player when searching or setting frequencies. The earphones are
used as antennas to receive FM radio reception.
Listening to FM Radio
1
Chapter 3. Multimedia Function Using the Photo Option Menu/
and hold [
1 Press
menu.
33
Listening to FM Radio
Listening to FM Radio (Continued)
To switch to Manual Tuning mode
Select this mode if you want to manually search through the FM band one frequency
at a time.
1 Tap [
Preset Mode
Go to Manual M
Delete Preset
Auto Preset
Preset List
FM Sensitivity
] in <Preset Mode>.
2 Tap [
[
■
] to select <Go to Manual Mode> and then tap
].
You will see <Manual Mode> on the screen.
To switch to Preset Mode
Select this mode if you want to search through your saved FM presets one preset at
a time.
Manual Mode
Go to Preset ..
Add Preset
Auto Preset
FM Sensitivity
1 Tap [
2 Tap [
■
■
NOTE
34
■
■
] to select <Go to Preset Mode> and then tap [
You will see <Preset Mode> on the screen.
3 Tap [
■
] in <Manual Mode>.
] to select the preset frequency.
Once <Preset Mode> appears on the screen, you can select a radio
frequency and listen to it.
If no preset frequencies are set, you will see <Preset list does not exist> and the player will not
switch to <Preset Mode>.
If you select (Preset List) on the FM option menu, you will see the preset frequencies.
For more information on the preset setup, refer to pages 36~37.
].
To automatically search for frequencies
Manual Mode
Press and hold [
] in <Manual Mode>.
The broadcast station frequency nearest from the point the button is
released will be searched.
To manually search for frequencies
Manual Mode
Tap [
■
] in <Manual Mode>.
Moves to next frequency whenever the button is tapped.
Chapter 3. Multimedia Function Listening to FM Radio
■
35
Listening to FM Radio
Setting FM Presets
You can set up to 30 presets in FM Radio mode.
To automatically set Presets
1 Tap [
2 Tap [
Manual Mode
Go to Preset ..
Add Preset
Auto Preset
FM Sensitivity
■
] to select <Auto Preset> and then tap [
You will see the Auto Preset window on the screen.
3 Tap [
■
] in FM Radio mode.
] to select <Yes> and then tap [
Up to 30 presets are automatically saved.
To cancel during setting
Tap [
■
] to cancel during auto scanning.
The auto preset setting is canceled and frequencies set up to then are stored.
■
NOTE
36
Using <Auto Preset> deletes all previous presets.
].
].
To manually set Presets
Manual Mode
■
The selected frequency will be added to the preset list. A maximum of 30
preset numbers are added to the list in sequential order.
set a preset number for other frequencies, follow 1-3 steps
4 Toabove.
■
NOTE
If a frequency that you try to add already exists in the list, you will see <This preset already exists.> and
the selected frequency is not added to the preset list.
To search for presets in Preset mode
Preset Mode
Tap [
■
■
NOTE
] in <Preset Mode>.
The preset number is selected and you can listen to the stored radio
frequency.
If you want to check the preset list in <Preset Mode>, Tap [
] to select <Preset List> and Tap [
Chapter 3. Multimedia Function Setting FM Presets
Go to Preset ..
Add Preset
Auto Preset
FM Sensitivity
1 In <Manual Mode>, Tap [ ] to select the desired frequency.
2 Tap [ ].
3 Tap [ ] to select <Add Preset> and then tap [ ].
].
37
Listening to FM Radio
To Delete Presets
Delete Preset
89.1MHz
1 Tap [
] in <Preset Mode>.
89.2MHz
89.3MHz
89.4MHz
2 Tap [
■
] to select <Delete Preset> and then tap [
].
The preset frequencies will appear.
3 Tap [
] to select the preset frequency you want to delete
and then tap [
].
■
The confirmation window will appear.
4 Tap [
■
] to select <Yes> and then tap [
].
The selected preset will be deleted.
select and delete other preset numbers, follow 1-4 steps
5 Toabove.
38
Listening to FM Radio
Setting FM Radio
To set FM Sensitivity
Manual Mode
2 Tap [
■
] in FM Radio mode.
] to select <FM Sensitivity> and then tap [
].
The FM Sensitivity menu appears.
3 Tap [
] to select the sensitivity and then tap [
].
■
You can select from <High>, <Middle> and <Low>.
■
The higher FM sensitivity is, the more frequencies that can be received.
Setting FM Radio
Chapter 3. Multimedia Function To Delete Presets/
Go to Preset ..
Add Preset
Auto Preset
FM Sensitivity
1 Tap [
39
Settings
Setting Alarm
Before you start!
This player has an alarm which can be set to go off at a scheduled time.
First, you should set the clock for the current time. √ page 43
1 Press and hold [ ] to move to the main menu.
2 Tap [ ] to select <Alarm> and then tap [ ].
3 Tap [ ] to select <New Alarm Set> and then tap [
■
Alarm
4 Tap [
■
New Alarm Set
Once
12
AM
00
Alarm Sound 2
Interval : 5 min
■
NOTE
You can set
up to 6 alarm
settings.
40
].
] to select <AM> or <PM> and then tap [
] to set the hour and then tap [
] to set the minute and then tap [
].
] to select an alarm sound and then tap [
] to select an interval and then tap [
] to select <Yes> and then tap [
The alarm setting is added to the alarm list.
].
].
The Confirmation window will appear.
10 Tap [
■
] to select a frequency and then tap [
Select either <Once>, <Off>, <Saturday~Sunday>, <Monday~Saturday>,
<Monday~Friday>, or <Everyday>.
5 Tap [
6 Tap [
7 Tap [
8 Tap [
9 Tap [
■
].
The Alarm Settings menu appears.
].
].
].
To edit the alarm setting
Edit Alarm
Once
12
AM
00
Alarm Sound 2
4 Use the [
] and [
] to edit the setting.
To delete the alarm setting
[
] to select the alarm setting to delete in the alarm list and
1 Tap
then tap [
].
■
The Delete window will appear.
3 Tap [
■
] to select <Yes> and then tap [
].
The selected alarm setting will be deleted.
■
The player will sound the alarm when it reaches the scheduled time. Then, tap [
] and use the
[ ] to select <Alarm after 3 min> or <Alarm Off>. To end the alarm, press and hold [ ] button.
You will return to the main menu.
■
If the USB cable is connected to the player, the alarm function does not work.
NOTE
CAUTION
].
The Confirmation window will appear.
Setting Alarm
2 Tap [
■
Chapter 4. Setting
Interval : 5 min
1 Press and hold [ ] to move to the main menu.
2 Tap [ ] to select <Alarm> and then tap [ ].
[
] to select the alarm setting to edit in the alarm list
3 Tap
and then tap [
].
41
Settings
Setting Display
You can adjust the screen saver and the turn-off time for the screen display.
1 Press and hold [
Settings
Display
] to move to the main menu.
Time
Language
System
2 Tap [
■
3 Tap [
■
42
].
] to select <Display> and then tap [
].
The Display menu appears.
4 Use the [
NOTE
] to select <Settings> and then tap [
The Settings menu appears.
] and [
Button Operation
■ Tap [
] to move up or down in the list.
■
Tap [
] to select and confirm your settings.
■
Tap [
] to return to the previous screen.
] to set the desired functions.
■
<Screen Saver>: You can set an image to use as a screen saver.
Select either <Analog Clock>, <Animation1>, <Animation2> <Animation3>, and <Photo> and set
the wait time. <Photo> is a photo you designated as a screen saver in <Add to Screen Saver>.
√ page 32
You can select from <15sec>, <30sec>, <1min>, <3min>, <5min>, and <Off>. If no button is
tapped within the time set shown above, the player will display the screen saver image.
■
<Display Off> : If no button is tapped within the time set shown below, the display screen will
automatically turn off. Select either <15sec>, <30sec>, <1min>, <3min>, <5min>, and <Always
On>. With the display turned off, tap any button to turn back on the display and the buttons.
Screen Saver
Photo
15 sec
1 Tap [
■
] to select <Screen Saver> and then tap [
2 Tap [
tap [
] to select a wait time and then tap [
].
The Confirmation window will appear.
4 Tap [
■
] to select the desired screen saver image and then
].
] to select <Yes> and then tap [
].
Setting Display
3 Tap [
■
].
The screen saver menu appears.
Chapter 4. Setting
Screen Saver Setting
The screen saver setting is complete.
If you set the <Screen Saver> to <15sec>, and then the <Display Off> to <15sec>.
NOTE
The set screen saver will appear in 15 seconds if no button is tapped. With the screen saver open,
the display will turn off in 15 seconds if no button is tapped.
43
Settings
Setting Time
Settings
Display
You can not only set the current Date/time set but also Sleep Timer and
Auto Power Off.
1 Press and hold [
] to move to the main menu.
Time
Language
System
2 Tap [
■
3 Tap [
■
].
] to select <Time> and then tap [
].
The Time menu appears.
4 Use the [
44
] to select <Settings> and then tap [
The Settings menu appears.
] and [
] to set the desired functions.
■
<Sleep Timer> : Turns off power automatically after the preset time.
Select either <Off>, <15 min >, <30 min>, <60 min>, <90 min>, or <120 min>.
■
<Auto Power Off> : Automatically turns power off when there is no
button operation after the preset time in the pause mode.
Select either <15 sec>, <30 sec>, <1 min>, <3 min>, or <5 min>.
■
<Date/Time Set> : You can set the current date and time. √ Page 45
Date/Time Set
1 Tap [
Date/Time Set
«•±‚ «¸Ωƒ
Display
Type
■
2 Tap [
YY «•±‚MM
«¸Ωƒ
DD
02
35
4 Tap [
■
5 Tap [
■
].
The confirmation window will appear.
] to select <Yes> and then tap [
The date/time setting will be saved.
].
Setting Time
06
].
] to move to <YY(year), MM(month), DD(day), AM/PM,
Hour, Minute> and use the [
] to set the date and time.
06
PM
] to set the date format and then tap [
3 Tap [
Date/Time Set
06
].
Chapter 4. Setting
YYMMDD
MMDDYY
DDMMYY
] to select <Date/Time set> and then tap [
The date format menu appears.
45
Settings
Setting Language
You can set the language for the menu.
1 Press and hold [
Settings
Display
] to move to the main menu.
Time
Language
System
2 Tap [
■
3 Tap [
4 Use the [
■
] to select <Settings> and then tap [
] to select <Language> and then tap [
] and [
Select from <English>, <
■
46
The supported languages can be changed or added.
].
] to select the language for the menu.
>, <Français>, <Deutsch>, <Italiano>,
<
>, <
>, <
>, <Español>, <
<Nederlands>, <Polski>, <Português>, and <Svenska>.
NOTE
].
The Settings menu appears.
>, <Magyar>,
Settings
Setting the System You can set various functions of the player.
1 Press and hold [
Settings
Display
] to move to the main menu.
Time
Language
System
2 Tap [
■
].
] to select <System> and then tap [
].
The System menu appears.
4 Use the [
] and [
] to set the desired functions
<Resume>: You can set the start point where the player resumes playback after you stop
playing the music. Selecting <On> will resume playback from the last stopped point while <Off>
will resume playback from the beginning of the last played file.
■
<Beep>: Enables button sounds. Select either <Off> or <On>.
■
<Volume Limit>: You can avoid hearing damage by setting the limit of the volume when using
the earphone. <On> will limit the maximum volume level up to 20. The maximum volume level
when Volume Limit is set to <Off> is 30.
■
<FM Region>: You can select your regional area for FM radio. Select from <Other Countries>,
<Korea/USA> and <Japan>.
■
NOTE
■
■
.
Frequency range by region
- Other Countries: Search for FM frequencies in 50 kHz increments between 87.50 MHz~108.00 MHz.
- Korea/USA: Search for FM frequencies in 100 kHz increments between 87.5 MHz~108.0 MHz.
- Japan: Search for FM frequencies in 100 kHz increments between 76.0 MHz~108.0 MHz.
FM region can be deleted or changed according to the target region of the player.
If you change the FM region, the previously stored radio frequencies are deleted.
Setting Language/
Setting the System
■
Chapter 4. Setting
3 Tap [
■
] to select <Settings> and then tap [
The Settings menu appears.
47
Settings
Setting the System (Continued)
■
<Default Set> : Returns all settings to the default value.
■
<About>: You can check the firmware version, memory capacity and track number.
■
■
■
Firmware Version : Displays the current firmware version.
Memory : Indicates the remaining memory capacity. <Used> indicates the usage, <Remaining> indicates
the remaining capacity and <Total> indicates the total memory capacity.
Files : <Music> indicates the number of music files, <Photo> for the number of photos, and <Total> for the
number of entire files.
Default Set
1 Tap [
Settings
Resume
■
Beep
] to select <Default Set> and then tap [
].
The Confirmation window will appear.
Volume Limit
FM Region
Default Set
About
NOTE
48
2 Tap [
] to select <Yes> and then tap [
■
<Yes> : Initializes all settings to default.
■
<No> : Cancels default settings.
].
■
If you reset the player, all functions you set are initialized to the default(factory) settings.
■
Regarding the Built-In Memory
The actual built-in memory available is slightly less than indicated as the internal firmware uses a
portion of the memory.
To Upgrade Firmware
Future upgrades may be available for this player to enhance performance and
compatibility.
to http://www.samsung.com, select [SUPPORT] → [DOWNLOAD CENTER]
1 Connect
and then select your player.
the player page appears, select [Firmware] below the model name to
2 When
download the latest firmware.
■
The uncompressed files will be displayed.
4 Connect the player to your PC with the USB cable.
click on the Start button on the
5 Right
bottom left of your PC's screen,
■
[Samsung YP-K5] is displayed in Windows
Explorer.
Setting the System/
To Upgrade Firmware
then choose Explore to Open
Windows Explorer on your PC.
Chapter 5. Troubleshooting
3 Uncompress the downloaded file onto your Desktop.
49
To Upgrade Firmware (Continued)
and click on the Desktop icon in
6 Locate
Windows Explorer (left column).
The contents of the Desktop will appear in
the right column.
and select the Firmware update files
7 Locate
(right column) and drag-and-drop it into the
Data folder of [Samsung YP-K5] → [Data].
8 After disconnecting USB Cable, the player will be turned off automatically.
9 Push and hold the [ HOLD ] switch in the opposite direction of the arrow.
œ
■
The firmware will be upgraded.
■
When upgrading is complete, the player will be turned off automatically.
■
NOTE
50
Check the battery charge status of the player. If the battery is not sufficiently charged, the firmware
will not be upgraded.
Troubleshooting
Check points & Troubleshooting
Problem
■
Power will not turn on.
■
■
Buttons do not work.
If a malfunction is experienced, check the following.
If the problem persists, contact 1-800-SAMSUNG for assistance.
■
■
Power will not turn on if the battery is fully discharged.
Recharge the battery and turn the power on again.
Press the Reset hole.
Check if the [HOLD] switch is in the direction of the arrow position.
Check if you tapped the right button, then tap again. √ Page 11
Press the Reset hole.
If <Display Off> is selected from <Settings> → <Display> the
LCD will be turned off. Tap any button to turn on the LCD or
check the Display settings. √page 43
■ The screen may not be visible under direct sunlight.
■
The screen will not turn on.
■
■
Check the battery status.
The power is automatically turned off when the battery is fully
discharged. Recharge the battery.
The battery time can vary, depending on the sound mode and
display setting.
The battery life may be shortened when left for extended periods
in low or high temperatures.
■
Program Malfunction
Please check if your PC requirements are met.
Connection to your PC
is disabled.
Press <Start> on the toolbar of your PC to run Windows Update.
Select Key Updates and Service Packs, then update all.
Reboot your PC and reconnect.
Troubleshooting
Battery life differs from
the Manual.
Chapter 5. Troubleshooting To Upgrade Firmware/
■
Power is turning off.
51
Troubleshooting (Continued)
Check points & Troubleshooting
Problem
■
Playing is disabled.
■
■
■
File upload is disabled.
■
■
52
Check if the available file has been saved in the memory.
Check if the music file is damaged.
Check if there is enough battery power.
Check if the USB cable is securely connected.
Reconnect if necessary.
Check if the memory is full.
Press the Reset hole.
Files or Data are Missing.
Check if the USB cable has been disconnected during file or data
transmission. If this is the case, it may cause serious damage not
only to files/data but also to the player. You have to be extra
cautious as Samsung cannot be not held responsible for data loss.
Abnormal Play Time
Display during Play.
Check if the file is in VBR (Variable Bit Rate) format.
The player is hot.
Heat may be generated during recharging. This has no effect on
the player life or functions.
Menu Tree
You can quickly view the menu structure.
Menu Select Screen
Music
FM Radio
Photo
Alarm
Settings
Chapter 6. Appendix
Time
Screen saver
Sleep Timer
Display Off
Auto Power Off
Beep
Date/Time Set
Volume Limit
Language
System
Resume
FM Region
Default Set
Troubleshooting/
Menu Tree
»≠∏È
º≥¡§
Display
About
53
Product Specifications
Model Name
Power
Built-in Battery Power
Compatibility
File
YP-K5
3.7V (Li-Polymer Rechargeable)
830 mAh
Music : MPEG1/2/2.5 Layer3(8kbps~320kbps, 22kHz~48kHz)
WMA(48kbps~192kbps, 22kHz~48kHz)
Image : JPEG(ISO/IEC 10918-1/Annex F-Sequential DCT-based mode
of operation)
Earphone Output
20mW(16Ω)
Output Frequency Range
20Hz~20KHz
Noise Ratio
Play Time
90 dB with 20kHz LPF(based on 1KHz 0 dB)
Music 30 hrs (based on MP3 128kbps, volume level 15 and normal mode)
Temperature Range for Operation -5~35 °C (23~95°F)
Case
Weight
Dimension (WxHxD)
FM Frequency
FM Signal to Noise Ratio
FM T.H.D
FM Useable Sensitiivity
Power Output
Speaker
Impedance
Frequency Range
54
Magnesium, Stainless
3.74 oz (106g)
1.87 X 3.86 X 0.7 inches (47.5 X 98 X 18.1 mm)
87.5~108.0MHz
50dB
1%
38dBµ
0.7W/Ch x 2Ch
8Ω
400 Hz ~ 20 KHz
● The contents of this Manual are subject to change without prior notice for further
improvement.
License
The product unit accompanying this user manual is licensed under certain intellectual
property rights of certain third parties. In particular, this product is licensed under the
following US patents : 5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396,
5,539,829, 5,606,618, 5,530,655, 5,777,992, 6,289,308, 5,610,985, 5,481,643,
5,544,247, 5,960,037, 6,023,490, 5,878,080, and under US Published Patent Application
No. 2001-44713-A1.
This license is limited to private non-commercial use by end-user consumers for licensed
contents. No rights are granted for commercial use. The license does not cover any
product unit other than this product unit and the license does not extend to any unli-censed
product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used
or sold in combination with this product unit. The license only covers the use of this
product unit to encode and/or decode audio files conforming to the ISO/IEC 11172-3 or
ISO/IEC 13818-3. No rights are granted under this license for product features or func-tions
that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
55
Safety Information
FCC
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Caution: Any changes or modifications in
construction of this device which are not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment
Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate
radio frequency ener-gy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications, However, there is no guarantee
that interference will not occur in a particular
installation.
56
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
◆
Reorient or relocate the receiving antenna.
◆
Increase the separation between the equipment
and receiver.
◆
Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected.
◆
Consult the dealer or an experienced radio/TV
technician for help.
FCC
Any changes or modifications not expressly
approved by the grantee of this device could
void the user’s authority to operate the device.
EMI/EMC: FCC Part 15 Subpart B
Compliance
Operation is subject to the following two
conditions:
This device complies with part 15 of the FCC
Rules.
This product conforms to the following
Council Directive:
◆
Directive 89/336/EEC, 92/31/EEC(EMC)
Declaration of Conformity
Name: Samsung Electronics Co., Ltd
Address: 416, Maetan-3Dong, Yeongtong-Gu,
Suwon City, Kyungki-Do, Korea 442-742
declares under its sole responsibility that the
product
Trade Name: Samsung Electronics Co., Ltd
Model Number: YP-K5
has been tested according to the
FCC/CISPR22/95 requirements for Class B
devices and found compliant with the following
standards
1.This device may not cause harmful
interference, and
2.This device must accept any interference
received, including interference that may
cause undesirable operation.
Party Responsible for Product Compliance
Samsung Electronics America
QA Lab.
3351 Michelson Dr. Suite #290
Irvine, CA92612
57
Warranty
Samsung warrants this product as free of
defects in material, design and workmanship
for a period of twelve(12) months from the
original date of purchase.
If during the period of warranty this product
proves defective under normal use and service,
you should return the product to the retailer
from whom it was originally purchased. The liability of Samsung and its appointed maintenance company is limited to the cost of repair
and/or replacement of the unit under warranty.
Return of the product for defective reasons
should be to the original purchaser; however,
Samsung Authorized Dealers and Authorized
Service Centers will comply with the warranty
on the terms issued to purchasers in the country concerned. For further information relating to
the Authorized Service Centers contact;
1-800-SAMSUNG (1-800-726-7864)
www.samsung.com
WARRANTY CONDITIONS:
1.The warranty is only valid when the warranty card
is properly completed, and upon presentation of the
proof of purchase consisting of original invoice or
sales slip confirmation, indicating the date of purchase, dealer’s name, model, serial No. and product
number.
Samsung reserves the right to refuse warranty service if this information has been removed or changed
after the original purchase of the product from the
dealer.
2.Samsung's obligations are to the repair of the
defective part, and at its discretion, replacement of
the product (service exchange unit).
3.Warranty repairs must be carried out by an
Authorized Samsung Dealer/Service Center. No
reimbursement will be made for repairs carried out
by non Samsung Centers, and warranty coverage
will not be valid for any repairs or damage caused by
such repairs.
4.Repair or replacement under the terms of this warranty does not give right to extension to or a new
starting of the period of warranty. Repair or direct
replacement under the terms of this warranty may be
fulfilled with functionally equivalent service exchange
units.
58
5. The warranty is not applicable in cases other
than defects in material, design and workmanship. The warranty does not cover the following:
◆
Periodic checks, maintenance, repair and
replacement of parts due to normal wear and
tear.
◆
Abuse or misuse, including but not solely limited to the failure to use this product for its normal
purposed or in accordance with Samsung's
instructions usage and maintenance.
◆
Use of the product in conjunction with accessories not approved by Samsung for use with
this product.
◆ Unauthorized modifications carried out for the
product to comply with local or national technical
standards in countries for which the Samsung
product was not originally designed.
◆ Repairs performed by non-authorized service
centers such as opening of the product by a nonauthorized person.
◆ The model, serial No. and product number on
the product has been altered, deleted, removed
or made illegible.
6. This warranty does not affect the consumer’s
statutory rights nor the consumers rights against
the dealer from their purchase/sales agreement.
◆
Failure of the product arising from incorrect
installationor use not consistent with technical or
safety standardsin current force, or failure to
comply with productmanual instructions.
◆
Accidents, Acts of God or any cause beyond
the control of Samsung caused by lightning,
water, fire, public disturbances and improper
ventilation.
59
Warranty
THERE ARE NO EXPRESS WARRANTIES
OTHER THAN THOSE LISTED AND
DESCRIBED ABOVE, AND NO WARRANTIES
WHETHER EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE,
SHALL APPLY AFTER THE EXPRESS WARRANTY
PERIODS STATED ABOVE, AND NO OTHER
EXPRESS WARRANTY OR GUARANTY GIVEN
BY ANY PERSON, FIRM OR
CORPORATION WITH RESPECT TO THIS
PRODUCT SHALL BE BINDING ON SAMSUNG,
SAMSUNG SHALL NOT BE LIABLE FOR LOSS
OF REVENUE OR PROFITS,FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY
OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE,
MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY
ON WHICH THE CLAIM IS BASED, AND EVEN
IF SAMSUNG HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. NOR
SHALL RECOVERY OF ANY KIND AGAINST
SAMSUNG BE GREATER IN AMOUNT THAN
THE PURCHASE PRICE OF THE PRODUCT
SOLD BY SAMSUNG AND CAUSING THE
ALLEGED DAMAGE.
WITHOUT LIMITING THE FOREGOING,
PURCHASER
60
ASSUMES ALL RISK AND LIABILITY FOR LOSS,
DAMAGE OR INJURY TO PURCHASER AND
PURCHASER’S PROPERTY AND TO OTHERS
AND THEIR PROPERTY ARISING OUT OF THE
USE, MISUSE OR INABILITY TO USE THIS
PRODUCT SOLD BY SAMSUNG NOT CAUSED
DIRECTLY BY THE NEGLIGENCE OF SAMSUNG.
THIS LIMITED WARRANTY SHALL NOT EXTEND
TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an
implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above
limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
This product is for personal use only, and is only for use in
compliance with the limitations of copyright and other laws.
To obtain warranty service, please contact SAMSUNG at:
Samsung Electronics America, Inc. 400 Valley Road, Suite
201 Mount Arlington, NJ 07856
1-800-SAMSUNG (1-800-726-7864) www.samsung.com
081299
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.
Samsung Electronics America, Inc.
1-800-SAMSUNG (7267864)
www.samsung.com
REV 0.0