Thank you for buying a Samsung Camera. This manual will guide you through using the Digimax 410/Digimax 340, including taking
images, downloading images and using MGI PhotoSuite III SE software. Please read this manual before using your new camera.
ENGLISH
SPECIAL FEATURES
Thank you for buying a Samsung Digital Camera.
This digital camera has the following features.
Digimax 410 : A high resolution of 4.0 mega pixels
Digimax 340 : A high resolution of 3.2 mega pixels
A 3 X optical and 2 X digital zoom lens
Movie clip recording function
Voice Recording & Playback for still image
An easy and fast PC interface with USB Storage Driver & Digimax viewer
An FCC warning
This device has been tested in accordance with the limits of a class B digital device
under item 15 of the FCC rules. These limits are designed to provide protection against
harmful interference in commercial installation.
This equipment generates, absorbs and can emit radio frequency energy. If it is not
installed and used in accordance with the instructions, it may cause harmful interference
to radio communication.
There is however, no guarantee that interference will not occur in some situations.
Should any interference occur when this device is in operation, please try one or more of
the following measures.
Change the location and direction of any aerial.
Increase distance between camera and affected device.
Use a different socket away from the affected device.
Please contact a Samsung agent or a radio/TV engineer.
This device complies with part 15 of the FCC Rules.
MANUFACTURER’S CONTENTS
READY
Manufacturer's contents
Please check that you have the correct contents before using this product.
CompactFlashTM
card (CF CARD)
Digital camera
4 AA Alkaline Batteries
Pouch
Video cable
USB cable
Camera strap
Applications S/ W ,
Driver CD-ROM
User manual
Product warranty
Accessories (optional)
AC Adapter
THIS DIGITAL CAMERA CAN BE USED FOR
Viewing images
on TV
Recording images
onto CD
Printing images
Editing images
on a PC
THIS DIGITAL CAMERA CAN BE USED FOR
Inserting images
directly into any
electronic document
Taking a self-portrait
and using the image
to personalize name
cards
You can even create your
own unique gift-wrap paper
by using your digital
images.
READY
Creation of
a digital photo album
CONTENTS
Ready
Getting to Know your camera
Safety note
Identification of features
Product Exterior
Viewfinder
LCD panel indicator
LCD monitor indicator
LCD monitor menu indicator
Preparation
Connecting to Power
Using the batteries
Using the AC power adapter
Attaching the strap
Inserting the CF CARD
Removing the CF CARD
Instructions on how to use the CF CARD
Selecting the date and time
7
8
10
10
12
14
15
17
19
19
19
20
20
21
21
23
24
Advanced
Camera working mode
Taking photos
Setting up the shooting function
Movie clip shot
Using the camera buttons
to adjust the camera
Using the LCD monitor
to adjust the camera
Setting up play back functions
Starting play mode
26
27
30
30
31
38
53
53
Setting up play function
by using the camera button
54
Setting up play back function using the LCD
monitor
59
Setting up the camera system
65
Starting Set up mode
65
Connecting to an external monitor
74
PC mode
75
Important notes
76
Caution
76
Warning indicator
78
Before contacting a service center
79
Specification
82
Software
Software manual
How to set up the software for Windows
Setting up USB driver for Windows
Setting up DirectX 8.1 for windows
Setting up Digimax Viewer
Setting up the MGI PhotoSuite III SE
Connecting the camera for Windows
Removable Disk
How to use the software
Digimax Viewer
MGI PhotoSuite III SE
Removing USB Driver for Windows
Connecting the camera for MAC
How to install and
use the USB driver for MAC
FAQ
84
85
86
88
90
92
95
95
97
97
98
111
113
114
115
GETTING TO KNOW YOUR CAMERA
Keep the manual in a safe place.
Symbol Explanations
This manual contains instructions on using this camera that will help you to use this camera
safely and correctly. This will help prevent danger and injury to others.
Warning
This is a descriptive statement warning of the result if the instructions are ignored or not
understood.
Note
This explains use of the camera, please refer to this.
Reference
This should further assist camera operation.
READY
Prior to using this camera, please read the user manual thoroughly.
SAFETY NOTE
WARNING
Do not attempt to modify this camera in any way. This may result in fire, injury, electric
shock or severe damage to you or your camera. Internal inspection, maintenance and
repairs should be carried out by your dealer or Samsung Camera Service Center.
Do not use the flash in close proximity to the people or animals. Positioning the flash too
close to your subject’s eyes, may cause eyesight damage. Do not attempt to photograph
children using a flash closer than 1 meter proximity.
When taking photographs, never point the lens of the camera directly into very strong
light. This may result in permanent damage to the camera or your eyesight.
Please do not use this product in close proximity to flammable or explosive gases, as this
could increase the risk of explosion.
For safety reasons keep this product and accessories out of reach of children or animals
to prevent accidents e.g.:
Swallowing batteries or small camera accessories.
In case of accidents, please consult a doctor immediately.
There is a risk of permanent eye damage if the flash is operated at a distance of less
than one meter from a person’s eyes.
There is a possibility of injury from the camera’s moving parts.
Should any form of liquid enter the camera, do not use it. Switch off the camera, and then
disconnect the power source (batteries or AC Power Adapter). You must contact your
dealer or Samsung Camera Service Center. Do not continue to use the camera as this
may cause a fire or electric shock.
Do not insert or drop metallic or inflammable foreign objects into the camera through
access points e.g. CARD slot and battery chamber. This may cause a fire or electric
shock.
Do not operate this camera with wet hands. This could pose a risk of electric shock.
SAFETY NOTE
Do not leave this camera in places subject to extremely high temperatures, such as a
sealed vehicle, direct sunlight or other places of extreme variances in temperature.
Exposure to extreme temperatures may adversely affect the camera’s internal
components and could cause a fire.
When in use, do not cover the camera or AC Power Adapter. This may cause heat to build
up and distort the camera case or cause a fire.
Always use the camera and its accessories in a well-ventilated area.
Leakage, overheating, or burst batteries could result in fire or injury.
Do not short circuit, heat or dispose of batteries in fire.
Do not use old batteries with new ones, or mix brands of batteries.
Ensure the batteries are positioned correctly with regard to polarity (+ / -).
When the camera is not in use for long periods, always unplug the camera from its power
source (batteries or AC Power Adapter) for safety purposes.
Leaking batteries can cause fire and pollution to the environment.
Allowing dust to accumulate in the camera over a long period is hazardous as extreme
circumstances may cause a fire. It is best to clean your camera prior to seasonal periods
of high humidity.
Consult your dealer or Samsung Camera Service Center for information on the cost of
cleaning your camera.
Do not move the camera while it is switched on, if you are using the AC Power Adapter.
After use, always switch off the camera before unplugging the adapter from the AC Power
wall socket. Then make sure that any connector cords or cables to other devices are
disconnected before moving the camera.
Failure to do so may damage the cords or cables and cause a fire or electric shock.
READY
NOTE
IDENTIFICATION OF FEATURES
Product Exterior (Front / Top / Bottom)
Microphone
Shutter button
(page 31)
Flash fading control
sensor
LCD panel
Mode dial (page 26)
Viewfinder
Strap eyelet
Self-timer lamp
Flash
Lens
Battery chamber cover
Cover lock
Tripod socket
IDENTIFICATION OF FEATURES
READY
Product Exterior (Back)
LCD monitor
Zoom ( W ) / Thumbnail
button
(page 33 / page 54)
Autofocus
indicator (Green)
lamp
Zoom (T) /Digital zoom
button
(page 33 / page 55)
Viewfinder
Power button (page 31)
LCD button
MENU button
Speaker
Flash indicator
(Red) lamp
LANDSCAPE /
DELETE button
5-function button
MIC / UP button (page 57 / page 34)
SELF-TIMER / RIGHT button (page 37)
FLASH/LEFT button (page 35)
OK button (page 34 / page 55 )
/II
PLAY&PAUSE/DOWN button (page 57 / page 34)
IDENTIFICATION OF FEATURES
Product Exterior (side)
DC input connection point (DC 6V IN)
Video connection terminal
USB connection terminal
Card cover
CF CARD
Card eject lever
Viewfinder
Close range picture area mark
Optimum picture area within 0.8m ~ 1.5m
Picture area frame
Optimum picture area over 1.5m
Autofocus frame
IDENTIFICATION OF FEATURES
Vertical and Horizontal shots are taken in the same way.
Avoid obstructing the lens or the flash when you take a picture.
[ Horizontal grip ]
[ Vertical grip ]
Note
As there can be some differences between what is seen through the Viewfinder and the
resulting image when taken at a range closer than 1.5m, it is recommended that you use the
LCD monitor to compose the shot.
READY
Reference
IDENTIFICATION OF FEATURES
LCD panel indicator
The LCD panel displays information about the shooting conditions.
Flash
Image size
Digimax 410
Digimax 340
L : 2272X1704
M : 1600X1200
S : 0640X0480
L : 2048X1536
M : 1024X0768
S : 640X0480
Auto flash and Red eye reduction :
Slow synchro : No indicator
Auto flash :
Fill in flash :
Flash off :
Shooting information
MACRO SHOT mode : Number of available shots remaining
STILL IMAGE mode : Number of available shots remaining
MOVIE CLIP mode : Available recording time
PLAY mode :
Number of available shots remaining
SETUP mode :
Number of available shots remaining
PC mode :
USB
Battery condition indicator
: The batteries are fully charged
: Prepare new batteries
: There is no battery capacity
Replace new batteries
IDENTIFICATION OF FEATURES
The LCD monitor displays information about the shooting conditions.
SHOT mode
Whenever you press the LCD button, the LCD monitor will change in the following order :
Image & Status
Image only
LCD Off.
Image & Status
1
Battery condition
page 14
2
Flash
page 36
3
Self-timer
page 37
4
Landscape shot
page 32
5
Macro shot
page 26
6
White balance
page 44
7
Metering methods
8
Exposure compensation
page 48
-2.0 ~ 0 ~ +2.0
page 46
READY
LCD monitor indicator
IDENTIFICATION OF FEATURES
AUTO 200 400
9
ISO
page 49
10
Focusing Methods
page 39
11
Sharpness
page 50
12
Image quality
page 43
13
Image size
page 42
9
14
Number of available shots remaining
15
Zoom / Digital zoom
page 33
16
Movie clip shot
page 30
17
Shooting mode
page 40
PLAY mode
DPOF (page 61)
Movie clip shot
This indicator will display when you set
DPOF.
Battery condition (page 14)
X 2.0
Sound indicator
When an image that has sound
information is selected, this indicator
will be displayed.
Sound recording
When you press the MIC ( )
button, this indicator will blink and
sound recording starts.
15SEC
Movie clip running time
13/13
Number of stored images
The last stored image number is
displayed.
Image magnification
REC
2002/ 01/ 01 00 : 00
Image & Status
Date / Time
IDENTIFICATION OF FEATURES
Each mode has a menu as shown below. The default settings in each mode are printed below.
STILL IMAGE / MACRO SHOT mode
FOCUSING
CENTRAL
SINGLE
2272X1704
FINE
AUTO
P1
SELECT
OK SET
Sub Menu
FOCUSING : select focusing methods (page 39)
SHOOTING MODE : select shooting mode (page 40)
IMAGE SIZE : select image size (page 42)
Digimax 410 : 2272X1704
Digimax 340 : 2048X1536
QUALITY : select image quality (page 43)
WHITE BALANCE : select white balance (page 44)
Main Menu
EXPOSURE
EV
0.0
METERING
FULL
EXPOSURE : select exposure value(page 46)
Select metering methods(page 48)
ISO : select ISO sensitivity (page 49)
SHARPNESS : select image sharpness(page 50)
LCD : select LCD brightness (page 51)
AUTO
NORMAL
BRIGHTNESS 5
P2
SELECT
OK SET
MOVIE CLIP mode
REC. TIME
REC. TIME
15SEC
SELECT
OK SET
REC.TIME : select recording time (page 52)
VOICE : set the voice recording function ON/OFF
READY
LCD monitor menu indicator
IDENTIFICATION OF FEATURES
PLAY mode
DELETE ALL
NO
START
QUANTITY
100SSCAM
BRIGHTNESS 5
SELECT
OK SET
DELETE ALL : delete all stored images (page 59)
SLIDE SHOW : select slide show function (page 60)
DPOF : select DPOF function (page 61)
FOLDER : change the folder name to 100SSCAM
(page 64)
LCD : select LCD brightness (page 64)
SETUP mode
FORMAT
FORMAT
FORMAT : format CF CARD (page 65)
POWER OFF : select auto power off time (page 66)
DATE/TIME : select date/time (page 67)
BEEP : set the beep sound ON/OFF (page 68)
VIDEO OUT : select video out signal (page 69)
NO
3 MIN
02/ 01/ 01
ON
NTSC
P1
SELECT
OK SET
FORMAT
LANGUAGE : select OSD(On Screen Display)
language (page 70)
RESET : select the default camera setting (page 71)
ENGLISH
NO
P2
SELECT
OK SET
Reference
There is no associated menu in PC mode and the LCD monitor is always turned off in PC
mode.
PREPARATION
There are two ways in which to provide the camera with power. You can use batteries (AA
Alkaline, Ni-MH), or alternatively, you can use an AC Adapter (DC 6V / 2.0A).
Using the batteries
1
Pull the battery chamber cover lock in the direction of the
arrow( ) and open the battery chamber cover by pushing
in the direction of the arrow( ).
2
3
Insert the batteries taking note of the polarity (+ / -).
To close the battery chamber cover, push it until it clicks.
Reference
This camera will automatically switch off when not in use for a period of time.
We recommend high–capacity ALKALINE batteries (2000mAh) as manganese batteries
cannot deliver sufficient power.
Note
Important information about battery usage
Please remove the batteries if the camera will not be used for long periods.
Batteries can lose power over time and are prone to leaking if kept inside the camera.
Low temperatures (below O°C) can affect the performance of the batteries and you may
experience reduced battery life.
Batteries will normally recover at normal temperatures.
Do not use old and new batteries at the same time.
During extended use of the camera, the camera body may become warm. This is perfectly
normal. If you are planning to use this camera for long periods of time, it is advisable to
use an AC adapter.
READY
Connecting to Power
PREPARATION
Using the AC power adapter
If you have access to a mains supply, using an AC Adapter allows the camera to be used
for long periods of time. If you connect the camera to a computer, it is advisable to use an
AC adapter, as this will enable extended use.
Plug the adapter into the connection point (DC IN 6V) on the
camera. Please ensure that you use an AC adapter with the
correct specification for the camera (6v /2.0A).
Failure to do so may affect your warranty.
WARNING
Always turn off the power before taking the AC adapter out of the mains supply.
As with all mains powered devices, safety is important. Ensure that neither the camera nor
adapter comes into contact with water or metallic materials.
Attaching the strap
To prevent accidental damage to the camera, always use the strap.
Refer to the illustrations below
1
2
PREPARATION
READY
Inserting the CF CARD
1
2
Pull the card cover in the direction of the arrow to open.
3
To close the card cover, push the card cover against the
arrow(step 1) until you hear a click.
Insert the card towards the arrow. The back side of the CF
CARD and the LCD monitor should face in the same
direction when the card is inserted.
Removing the CF CARD
1
2
3
Turn the power off using the power button (
).
Open the card cover and push the Card eject lever (
down.
)
Remove CF CARD as shown in the picture.
CompactFlashTM card is the registered trademark of Sandisk.
Note
Repeated use of a CF CARD will eventually reduce the card’s performance.
Should this be the case, you will need to purchase a new CF CARD.
PREPARATION
Reference
Using a 16/ 32MB CF CARD, the specified shooting capacity will be as follows.
(These figures are intended as an indication of expected performance)
Number of shots
Recorded image size
Recorded image quality
Digimax 340
Digimax 410
16MB
32MB
16MB
32MB
(Large)
Super Fine
8
17
6
12
D-410 : 2272X1704
Fine
12
25
12
25
D-340 : 2048X1536
Normal
19
38
25
51
(Medium)
Super Fine
19
38
12
25
D-410 : 1600X1200
Fine
38
77
25
51
D-340 : 1024X0768
Normal
77
155
51
103
Super Fine
77
155
77
155
D-410 : 640X480
Fine
124
249
124
249
D-340 : 640X480
Normal
182
366
182
366
(Small)
These figures are approximate as image capacities can be affected by variables such as
card performance and subject matter.
PREPARATION
Using a new CF CARD for the first time
Before using the CF CARD, it must be initialized.
Initializing prepares the CF CARD for recording data.
For more details, please refer to page 65.
Preserving the CF CARD data
If the card is subjected to any of the following, the recorded data may become corrupted :
- When the CF CARD is used incorrectly.
- If the power is switched off while recording, deleting, formatting) or reading.
It is advisable to copy important data onto other media as back-up e.g. floppy disks,
hard disks, CD etc.
Samsung cannot be held responsible for lost data.
Important information on the use of the CF CARD
If you switch off this camera while it is reading, initializing or playing, the information on the
CF CARD may be corrupted.
The CF CARD is an electronic precision device. Do not bend, drop or subject the card to any
heavy impact.
Do not store the CF CARD in an environment with strong electronic or magnetic fields, e.g.
near loud speakers or TV receivers.
Please do not use or store in an environment where there are extremes of temperature.
Do not allow the CF CARD to become dirty or to come into contact with any liquid.
Should this happen, clean the card with a soft cloth.
Please keep the CF CARD in its case when not in use.
During and after periods of extended use, you may notice that the CF CARD is warm.
This is perfectly normal.
READY
Instructions on how to use the CF CARD
PREPARATION
Selecting the date and time
You will need to check and select the correct Date / Time when : The camera is used for the first
time. The batteries have been removed.
The DATE / TIME will only be displayed on the LCD monitor. When you print the image, the DATE
/TIME will not be printed.
The DATE and TIME will be displayed on the lower end of the LCD monitor in PLAY mode.
The DATE and TIME will not be displayed in SHOT(STILL IMAGE/MACRO SHOT/MOVIE CLIP)
mode.
1
2
3
4
5
5-function button
Turn on the power by pressing the Power button.
Set the mode dial to the SETUP mode (
).
The setup menu will be displayed on the LCD monitor.
DATE / TIME
DATE
Move to [ DATE / TIME ] menu by using the DOWN button
( ) on the 5-function button.
Move to [ DATE / TIME ] sub menu by using the RIGHT
button ( ) on the 5-function button.
2002/ 01/
01
00 : 00
SELECT
Selecting DATE
In step 5, select [ DATE ] by pressing UP(
) / DOWN(
) button and press OK button.
Selecting TIME
In step 5, select [ TIME ] by pressing UP(
) / DOWN(
) button and press OK button.
OK SET
PREPARATION
To select YEAR/ MONTH / DAY or HOUR / MINUTE, press LEFT (
To change the numbers, press UP ( ) / DOWN ( ) button.
) / RIGHT (
Press the OK button to confirm the setting at the [DAY] or [MINUTE] sub menu.
The camera can now be used with the selected camera mode.
Reference
The selection range for date/time setup covers from 2002~2100.
(It is automatically programmed to allow for a leap year/ month)
It is originally set as [2002/01/01 00:00]
) button.
READY
6
7
CAMERA WORKING MODE
Camera working mode
You can select the desired working mode by using the mode dial located on the top of the
camera.
This digital camera has 6 working modes. These are listed below.
STILL IMAGE mode (
)
This mode is used for taking still images from 0.8 ~ infinity and
taking a moving subject continuously.
MACRO SHOT mode (
)
This mode is used for macro shots between 0.2m ~ 0.8m and
taking a moving subject continuously. The flash mode is
changed to FLASH OFF when this mode is selected, but you
can change the flash mode.
Mode dial information
MOVIE CLIP mode (
)
This mode is used for movie clips.
The flash is changed to FLASH OFF when this mode is selected.
PLAY mode (
)
In this mode, the stored images on the CF CARD can be viewed on the LCD monitor on
the back of the camera or on an external monitor using a video output terminal. If you view
an image which has additional sound recording, the sound will play back whilst the image
is viewed.You can use single image play back, 6 thumbnail screen, slide show, one image
deletion, all image deletion , sound recording and digital zoom in this mode.
PC mode (
)
Your computer will recognize the camera as a Removable Disk when connected by the
USB cable. You can transfer images between the computer and the camera.
SETUP mode (
)
In this mode, you can set up basic settings such as format, auto power off, date / time,
beep sound, video out and language.
TAKING PHOTOS
Now let's take a picture
To switch on the camera, press the POWER button ( ).
2
3
Select the desired shot mode (STILL IMAGE / MACRO SHOT / MOVIE CLIP ) according
to the image range or subject by using the mode dial ( ) on the top of the camera.
4
5
Change the camera functions by using the LCD monitor and select the appropriate
settings (image quality, image size etc.).
Refer to pages 30~73 for information on camera setting.
Decide the image composition that you want to achieve by using the optical viewfinder or
the LCD monitor.
When taking images, squeeze the shutter button gently to avoid camera shake.
Pressing the shutter button down halfway activates the autofocus and checks the
condition of the flash.
Pressing the shutter button down halfway activates the autofocus. After selecting the
focus, the Green lamp will light up.
To prevent camera shake, press the Shutter button gently as the autofocus might be
changed by camera shake.
When the green lamp illuminate, you can take a picture and store the relevant data for
shot.
ADVANCED
1
TAKING PHOTOS
Note
Select MACRO SHOT mode when the subject is between 0.2m ~ 0.8m from the camera.
Refer to page 26 for information on MACRO SHOT.
If you do not select the correct shot mode appropriate to the distance from the subject to the
camera, you will not be able to obtain a clear shot of the subject.
Avoid obstructing the Flash control sensor when you take an image. An image can be
spoiled when a finger, hair or camera strap is in front of the Flash control sensor.
Using the LCD monitor extensively will drain the batteries. We recommend using the optical
viewfinder as often as possible in order to extend battery life.
If you take an image in a dark place a " LOW LUMINANCE" message will display on the
LCD monitor. In addition, it may cause the camera to fix the focus as listed below.
Normal shot mode : 2.0M Macro shot mode : 0.5M
In this case, increase the lighting value or take an image in a bright place.
Reference
If there is no card, [NO CARD] message will show in the LCD monitor.
If there is insufficient memory available, the following message is displayed
and the camera will not operate.
CARD FULL
To optimize the amount of memory in the camera, replace the CF CARD or delete
unnecessary images stored on the CF CARD.
TAKING PHOTOS
Reference
Note
Under certain conditions the auto focus system may not perform as expected.
When photographing a subject that has little contrast.
If the subject is highly reflective or shiny.
If the subject is moving at high speed.
When the subject matter has only horizontal lines or the subject is very narrow
(such as a stick or flagpole).
When there is strong reflected light, or when the background is very bright.
Backlight compensated shot
When taking an outdoor shot, avoid facing the sun, as the image may be dark because of
backlight. In backlight conditions, please use the exposure compensation (refer to page
46). Alternatively, use SPOT metering function (refer to page 48) and the exposure will be
adjusted accordingly.
ADVANCED
There are two LED lamps (one green, one red) positioned
next to the viewfinder.
If the camera is in focus when you press the shutter button
halfway, the green LED will light up and you can take an image.
If the red lamp lights up, the flash can fire.
If the red lamp blinks, the flash is being charged.
When an image is being stored onto the CF CARD, the green lamp blinks slowly.
When the image data has been stored, the green LED light will go out.
After the green LED light has gone out, you can resume taking images.
SETTING UP THE SHOOTING FUNCTION
Movie clip shot
In a movie clip shot, sound and movie clip are recorded at the same time.
Sound recording is optional in MOVIE CLIP mode.
When the mode dial is rotated to MOVIE CLIP mode, the LCD monitor will be displayed as
shown below.
Available recording time
Press the shutter button once and movie clips are recorded for as long as the available
recording time allows. Movie clips will still be recorded if the shutter button is released.
If you wish to stop recording, press the shutter button again.
The self-timer lamp (red) on the front of the camera will illuminate during the recording.
Image size and type are listed below.
- Image size : QVGA (320 x 240)
- File type : *.AVI
When the movie clip is being recorded to the CF CARD, the Green lamp blinks.
[RECORDING] message will be displayed on the LCD monitor.
Note
Due to the CF CARD capacity the recording may be suspended during the available
recording time.
SETTING UP THE SHOOTING FUNCTION
Using the camera button to adjust the camera
Shot mode(STILL IMAGE / MACRO SHOT / MOVIE CLIP ) functions can be set up using
the camera button.
POWER button
SHUTTER button
- Used for taking images in shot mode (STILL IMAGE / MACRO SHOT / MOVIE CLIP ).
- Pressing the shutter button down halfway activates the autofocus and checks the condition of the
flash. Pressing the shutter down fully takes the image and stores the relevant data regarding the
shot.
ADVANCED
- Used for turning the camera power on / off.
- The camera power will be turned off automatically during periods of inactivity.
The camera can be reactivated by pressing the power button again.
SETTING UP THE SHOOTING FUNCTION
LCD button
- Pressing the LCD button in the shot (STILL IMAGE / MACRO SHOT / MOVIE CLIP)mode will
change the display as shown below.
Image & Status
Image
LCD Off
MENU button
- When you press the MENU button, a menu related to each camera mode will be displayed
on the LCD monitor. Pressing it again will return the LCD to the initial display.
- A menu option can be displayed when the following are selected : shot(STILL IMAGE /
MACRO SHOT / MOVIE CLIP )mode, PLAY mode and SETUP mode.
There is no menu available when PC mode is selected.
LANDSCAPE button
- Used for taking landscape scenes.
Note
After taking the landscape scene, the focus will be adjusted for landscape scene. If you want
to take a normal scene, press the LANDSCAPE button to change the focus mode.
SETTING UP THE SHOOTING FUNCTION
ZOOM (W/T) button
Used for digital or optical zooming in / out in SHOT mode (STILL IMAGE / MACRO SHOT
/ MOVIE CLIP).
Digital zooming is not available in MOVIE CLIP mode
When you press the zoom (W/T) button, the zoom bar will display in the upper centre of
the LCD monitor.
Optical zoom
Digital zoom
To use digital zoom, the LCD monitor has to be turned on.
The digital zoom will operate only when the optical zoom is at its maximum i.e. when
the subject appears to be at its closest. Pressing the T button again will operate the
digital zoom.
Cancel Digital zoom
Pressing the W button will reduce the digital zoom and pressing the W button again will
proceed to reduce the optical zoom until the minimum setting is reached or the button is
released.
ADVANCED
Digital zoom
Optical zoom
1. Zoom TELE
Press zoom button T.
This will zoom into the subject i.e. the subject will appear
nearer.
2. Zoom WIDE
Press zoom button W.
This will zoom out from the subject i.e. the subject will appear
further away. Pressing the W button continuously will set the camera to its minimum zoom
setting i.e. the subject appears at its furthest from the camera.
SETTING UP THE SHOOTING FUNCTION
Reference
Images taken using the digital zoom may take a little longer for the camera to process.
Allow time for this to take place.
The digital zoom cannot be used in movie clip shots.
You may notice a decrease in image quality when using digital zoom.
Note
Take care not to touch the lens during the zoom operation as this may cause damage.
Take care not to touch the lens to avoid taking a dim image and camera malfunction.
When the camera is turned on, take care not to touch the camera’s moving parts of lens as
this may make the image dim.
Take care not to touch the lens during the zoom operation as this may make the image dim.
If the image is dim, turn the camera power off and turn on again to modify the lens position.
OK button
Used as a confirming data that is changed by using
/
/
/
buttons.
UP button
When the menu is displayed on the LCD monitor, pressing the UP (
cursor shift to up, or changes the sub menu.
) button makes the
DOWN button
When the menu is displayed on the LCD monitor, pressing the DOWN (
the cursor shift to down or changes the sub menu.
) button makes
SETTING UP THE SHOOTING FUNCTION
FLASH / LEFT button
When the menu is displayed on the LCD monitor, pressing the LEFT (
) button makes
the cursor shift to the left or to the main menu.
When the menu is not displayed on the LCD monitor, the LEFT (
) button operates as
the FLASH ( ) button.
Use the correct flash to suit the environment.
< Selecting Auto flash >
Note
Photograph within the flash range. The flash ranges are listed below.
ISO
MACRO SHOT mode
A
STILL IMAGE mode
A
W
T
0.5 ~ 0.8m
0.8 ~ 3m
0.8 ~ 2m
The image quality is not guaranteed if the subject is too close or highly reflective.
ADVANCED
1. Turn the camera power on.
2. Rotate the mode dial to the STILL IMAGE mode or
MACRO SHOT mode.
3. Do not turn the LCD monitor off.
4. Press the FLASH ( ) button until the desired FLASH
mode indicator displays on the LCD monitor.
5. Take a picture.
SETTING UP THE SHOOTING FUNCTION
Flash mode indicator
Auto flash and Red eye reduction
: If a subject or background is dark, the camera flash will work automatically
and will reduce the red-eye effect by using the red-eye reduction function.
Slow synchro : The flash will operate in conjunction with a slow shutter speed in order
to obtain the correct exposure. We recommend using a tripod.
Auto flash : If the subject or background is dark, the camera flash will operate
automatically.
Fill in flash : The flash fires regardless of available light. The intensity of the flash will be
controlled, according to the prevailing conditions. The brighter the
background or subject is, the less intense the flash will be.
Flash off : The flash does not fire.
Reference
Using the flash frequently will reduce the life of the batteries.
Under normal operating conditions the charging time for the flash is normally within 7
seconds. If the batteries are weak, the charging time will be longer.
The default of each mode is listed below.
- STILL IMAGE mode : Auto flash and Red eye reduction
- MACRO SHOT mode : Flash off (user selectable)
- MOVIE CLIP mode : Flash off (fixed)
SETTING UP THE SHOOTING FUNCTION
SELF-TIMER / RIGHT button
When the menu is displayed on the LCD monitor, pressing the RIGHT (
) button makes
the cursor shift to the sub menu.
When the menu is not displayed on the LCD monitor, the RIGHT (
) button operates as
the SELF-TIMER (
) button.
This function is used when the photographer would also like to be in the image.
Reference
The default is OFF
The self-timer LED lamp(red) and Self timer indicator on the LCD monitor will blink for 10
seconds after the SELF-TIMER button has been pressed.
- For the first seven seconds, the LED blinks at one second intervals.
- For the final three seconds, the LED blinks quickly at 0.5-second intervals.
ADVANCED
1. Turn the camera power on.
2. Rotate the mode dial to the shot mode (STILL IMAGE /
MACRO SHOT).
3. Do not turn the LCD monitor off.
4. If the self-timer indicator is displayed on the LCD monitor and
LCD panel by pressing the SELF TIMER (
) button, the
< Selecting Self-timer >
setting is completed.
5. Pressing the shutter button will allow an interval of 10 seconds before the image is taken.
After that, the self-timer is cancelled.
SETTING UP THE SHOOTING FUNCTION
Using the LCD monitor to adjust the camera
Shooting functions can be changed by using the LCD monitor.
In the shot mode, pressing the MENU button displays the menu on the LCD monitor.
The following functions are available, depending on the mode you have selected
(STILL IMAGE / MACRO SHOT / MOVIE CLIP ).
STILL IMAGE mode
MACRO SHOT mode
MOVIE CLIP mode
FOCUSING
X
SHOOTING MODE
X
IMAGE SIZE
X
QUALITY
X
WHITE BALANCE
X
EXPOSURE
X
ISO
X
SHARPNESS
X
LCD
REC.TIME
X
X
X
Reference
The menu will not be displayed on the LCD monitor under the following conditions :
- When another button is being operated.
- While image data is being processed. ( when the green LED next to the viewfinder flashes)
- When there is no battery capacity.
Explanation of the 5-function button .
UP button ( ) :
Pressing the UP button ( ) makes the cursor move
up.
DOWN button ( ) : Pressing the DOWN button ( ) makes the cursor
move down.
LEFT button ( ) : Pressing the LEFT button ( ) makes the cursor move
to the left.
RIGHT button ( ) : Pressing the RIGHT button ( ) makes the cursor
move to the right
OK button :
Pressing the OK button confirms the selection.
When the menu is showing on the LCD monitor, it is not possible to operate the shutter
button i.e. take an image. To take an image, simply cancel the menu display by pressing the
MENU button. The menu will no longer show and the camera is ready to take an image.
SETTING UP THE SHOOTING FUNCTION
FOCUSING
In STILL IMAGE and MACRO SHOT mode, you can select the focusing range.
FOCUSING
CENTRAL
SPOT
P1
SELECT
OK SET
< STILL IMAGE mode >
FOCUSING
CENTRAL
SPOT
P1
SELECT
OK SET
< MACRO SHOT mode >
ADVANCED
1. Turn the camera power on.
2. Rotate the mode dial to the STILL IMAGE mode or MACRO
SHOT mode.
3. Do not turn the LCD monitor off.
4. Press MENU button to display the menu on the LCD monitor.
5. Press UP ( ) / DOWN ( ) button and select [FOCUSING].
6. The cursor can be moved by pressing the RIGHT ( ) button
to the [FOCUSING] sub menu.
7. Select the desired sub menu by pressing the UP ( ) /
DOWN ( ) buttons. The default is CENTRAL.
8. After selecting the desired sub menu, press the OK button to
confirm the setting.
9. Press the MENU button to cancel the menu display.
SETTING UP THE SHOOTING FUNCTION
SHOOTING MODE
This allows continuous shooting.
In this mode, you can take moving subjects continuously.
Once a continuous shooting sequence has been completed, the camera resets to single
shooting mode.
1. Turn the camera power on.
2. Rotate the mode dial to the STILL IMAGE mode or MACRO
SHOT mode.
3. Do not turn the LCD monitor off.
4. Press MENU button to display the menu on the LCD monitor.
5. Press UP ( ) / DOWN ( ) button and select [SHOOTING
MODE].
6. The cursor can be moved by pressing the RIGHT ( )
button to the [SHOOTING MODE ] sub menu.
7. Select the desired sub menu by pressing the UP ( ) /
DOWN ( ) buttons. The default is SINGLE
8. After selecting the desired sub menu, press the OK button to
confirm the setting.
9. Press the MENU button to cancel the menu display.
SHOOTING MODE
SINGLE
CONTINUOUS
P1
SELECT
OK SET
< STILL IMAGE mode >
SHOOTING MODE
SINGLE
CONTINUOUS
P1
SELECT
OK SET
< MACRO SHOT mode >
SETTING UP THE SHOOTING FUNCTION
Reference
When [CONTINUOUS] is selected, the flash will automatically be cancelled.
To stop the CONTINUOUS shooting, release the shutter button.
ADVANCED
SETTING UP THE SHOOTING FUNCTION
SIZE
In STILL IMAGE and MACRO SHOT mode, you can select the image size.
A large image uses more memory, so increasing image size will reduce the total number of
shots you can store on a CF CARD. The image sizes are listed below.
Digimax 410
2272x1704
1600x1200
640x480
Digimax 340
2048x1536
1024x768
640x480
1. Turn the camera power on.
2. Rotate the mode dial to the STILL IMAGE mode or MACRO
SHOT mode.
3. Do not turn the LCD monitor off.
4. Press MENU button to display the menu on the LCD
monitor.
5. Press UP ( ) / DOWN ( ) button and select [IMAGE
SIZE].
6. The cursor can be moved by pressing the RIGHT ( )
button to the [IMAGE SIZE] sub menu.
7. Select the desired sub menu by pressing the UP ( ) /
DOWN ( ) buttons.
The default is Digimax 410 : 2272x1704
Digimax 340 : 2048x1536.
8. After selecting the desired sub menu, press the OK button to
confirm the setting.
9. Press the MENU button to cancel the menu display.
IMAGE SIZE
P1
(D-410)
(D-340)
2272X1704
2048X1536
1600X1200
1024X768
640X480
640X480
SELECT
OK SET
< STILL IMAGE mode >
IMAGE SIZE
P1
(D-410)
(D-340)
2272X1704
2048X1536
1600X1200
1024X768
640X480
640X480
SELECT
OK SET
< MACRO SHOT mode >
SETTING UP THE SHOOTING FUNCTION
QUALITY
In STILL IMAGE and MACRO SHOT mode, you can select the image data compression rate.
The higher the QUALITY setting, the better the final image will be. However, the high quality
setting will require more memory and therefore reduce the number of images you can store
on the CF CARD.
SUPER FINE is the highest quality and NORMAL is the lowest setting. Choose the setting
appropriate for your needs.
1. Turn the camera power on.
QUALITY
SUPER FINE
FINE
NORMAL
P1
SELECT
OK SET
< STILL IMAGE mode >
QUALITY
SUPER FINE
FINE
NORMAL
P1
SELECT
OK SET
< MACRO SHOT mode >
Reference
The image file is stored in *.jpg.
This file format complies with DCF(Design rule for Camera File system).
ADVANCED
2. Rotate the mode dial to the STILL IMAGE mode or MACRO
SHOT mode.
3. Do not turn the LCD monitor off.
4. Press MENU button to display the menu on the LCD
monitor.
5. Press UP ( ) / DOWN ( ) button and select [QUALITY].
6. The cursor can be moved by pressing the RIGHT ( )
button to the [QUALITY] sub menu.
7. Select the desired sub menu by pressing the UP ( ) /
DOWN ( ) buttons. The default is SUPER FINE.
8. After selecting the desired sub menu, press the OK button to
confirm the setting.
9. Press the MENU button to cancel the menu display.
SETTING UP THE SHOOTING FUNCTION
WHITE BALANCE
Different lighting conditions may cause a color cast on your images.
The white balance control allows you to adjust the colors to appear more natural looking.
The setting remains until the power is turned off.
1. Turn the camera power on.
2. Rotate the mode dial to the STILL IMAGE mode or MACRO
SHOT mode.
3. Do not turn the LCD monitor off.
4. Press MENU button to display the menu on the LCD
) / DOWN(
) button and select
monitor. Press UP (
[WHITE BALANCE].
5. The cursor can be moved by pressing the RIGHT (
)
WHITE BALANCE
AUTO
DAYLIGHT
FLUORESCENT
TUNGSTEN
P1
SELECT
OK SET
< STILL IMAGE mode >
button to the [WHITE BALANCE] sub menu.
6. Select the desired sub menu by pressing the UP (
)/
DOWN (
) buttons. The default is AUTO.
7. After selecting the desired sub menu, press the OK button to
confirm the setting.
8. Press the MENU button to cancel the menu display.
WHITE BALANCE
AUTO
DAYLIGHT
FLUORESCENT
TUNGSTEN
P1
SELECT
OK SET
< MACRO SHOT mode >
SETTING UP THE SHOOTING FUNCTION
Reference
W.BALANCE sub menu explained
- AUTO :
The camera automatically selects the appropriate white balance settings,
depending on the prevailing lighting conditions.
- DAYLIGHT :
For taking images outside.
- FLUORESCENT : For shooting under fluorescent lighting.
- TUNGSTEN :
For shooting under tungsten (standard light bulb) and halogen lighting.
ADVANCED
SETTING UP THE SHOOTING FUNCTION
EXPOSURE
This camera automatically adjusts the exposure according to the ambient lighting
conditions. However, you can select the exposure value by using [EXPOSURE] sub menu.
This function can be used in STILL IMAGE and MACRO SHOT mode.
If you increase the exposure value, the image will be brighter.
If you decrease the exposure value, the image will be darker.
1. Turn the camera power on.
2. Rotate the mode dial to the STILL IMAGE mode or
MACRO SHOT mode.
3. Do not turn the LCD monitor off.
4. Press MENU button to display the menu on the LCD
) / DOWN (
) button and select
monitor. Press UP (
[EXPOSURE].
5. To select [EV], press the RIGHT (
) button
6. The cursor can be moved by pressing the RIGHT (
)
button to the [EV] sub menu.
EXPOSURE
EV
+0.5
0.0
-0.5
P2
SELECT
OK SET
< STILL IMAGE mode >
EXPOSURE
EV
+0.5
0.0
-0.5
P2
SELECT
OK SET
< MACRO SHOT mode >
SETTING UP THE SHOOTING FUNCTION
7 Select the desired sub menu by pressing the UP (
) / DOWN (
) buttons.
The default setting is 0.0 EV. The camera calculates the exposure value automatically.
8. After selecting the desired sub menu, press the OK button to confirm the setting.
9. Press the MENU button to cancel the menu display.
Reference
ADVANCED
Exposure compensation setting range : -2.0 ~ +2.0 EV (0.5 EV steps)
This change to the exposure will remain until the camera is switched off.
When the camera is turned on again, the exposure compensation setting returns to 0.0EV
(discarding the exposure compensation).
When you have selected a change in exposure value, the value is displayed on the LCD.
Decreasing or increasing the exposure value may lead to images being under or over
exposed (too dark or too bright).
Review your images using the LCD monitor to check that they have been successful.
SETTING UP THE SHOOTING FUNCTION
METERING
This button can be used to obtain the right exposure.
1. Turn the camera power on.
2. Rotate the mode dial to the STILL IMAGE mode or MACRO
SHOT mode.
3. Do not turn the LCD monitor off.
4. Press MENU button to display the menu on the LCD
) / DOWN (
) button and select
monitor. Press UP (
[EXPOSURE].
5. The cursor can be moved by pressing the RIGHT (
)
button to the [EV] sub menu.
6. Press UP (
) / DOWN (
) button and select
[METERING].
7. The cursor can be moved by pressing the RIGHT (
)
button to the [METERING] sub menu.
8. Select the desired sub menu by pressing the UP (
)/
DOWN (
) buttons. After selecting the desired sub menu,
press the OK button to confirm the setting.
The default is FULL.
9. Press the MENU button to cancel the menu display.
EXPOSURE
EV
METERING
FULL
CENTRAL
SPOT
P2
SELECT
OK SET
< STILL IMAGE mode >
EXPOSURE
EV
METERING
FULL
CENTRAL
SPOT
P2
SELECT
OK SET
< MACRO SHOT mode >
METERING mode indicator
- FULL :
Exposure will be calculated based on an average of the light available in the
whole image area.
- CENTER : Exposure will be calculated based on an average of the light available in the
image area. However, the calculation will be biased towards the centre of the
image area.
- SPOT :
Use this function when there is backlight or when photographing a subject
that has little contrast.
In backlighting conditions adjust the light metering to suit the subject matter.
SETTING UP THE SHOOTING FUNCTION
ISO
You can select the camera’s sensitivity to light by selecting the ISO sub menu.
Raising the ISO sensitivity will mean that the camera needs less light in order to take an
image. However, the higher the ISO value is, the grainier the image will be.
- AUTO : The camera's sensitivity is automatically changed by variables such as lighting
value or subject brightness.
- 200/400 : In the same lighting condition, the higher ISO value is, the faster the shutter
speed will be. However, the images can be saturated with the high brightness
condition.
ADVANCED
1. Turn the camera power on.
2. Rotate the mode dial to the STILL IMAGE mode or MACRO
SHOT mode.
3. Do not turn the LCD monitor off.
4. Press MENU button to display the menu on the LCD
monitor. Press UP ( ) / DOWN ( ) button and select
[ISO].
5. The cursor can be moved by pressing the RIGHT ( )
button to the [ISO] sub menu.
6. Select the desired sub menu by pressing the UP ( ) /
DOWN ( ) buttons. The default is AUTO.
7. After selecting the desired sub menu, press the OK button to
confirm the setting.
8. Press the MENU button to cancel the menu display.
ISO
AUTO
ISO 200
ISO 400
P2
SELECT
OK SET
< STILL IMAGE mode >
ISO
AUTO
ISO 200
ISO 400
P2
SELECT
OK SET
< MACRO SHOT mode >
SETTING UP THE SHOOTING FUNCTION
SHARPNESS
In STILL IMAGE and MACRO SHOT mode, you can select the image sharpness.
Select the desired SHARPNESS (SOFT/ NORMAL/ HARD) depending on the subject
matter.
1. Turn the camera power on.
2. Rotate the mode dial to the STILL IMAGE mode or MACRO
SHOT mode.
3. Do not turn the LCD monitor off.
4. Press MENU button to display the menu on the LCD
monitor.
5. Press UP ( ) / DOWN ( ) button and select
[SHARPNESS].
6. The cursor can be moved by pressing the RIGHT ( )
button to the [SHARPNESS] sub menu.
7. Select the desired sub menu by pressing the UP ( ) /
DOWN ( ) buttons. The default is NORMAL.
8. After selecting the desired sub menu, press the OK button to
confirm the setting.
9. Press the MENU button to cancel the menu display.
SHARPNESS
SOFT
NORMAL
HARD
P2
SELECT
OK SET
< STILL IMAGE mode >
SHARPNESS
SOFT
NORMAL
HARD
P2
SELECT
OK SET
< MACRO SHOT mode >
Reference
Explanation of SHARPNESS sub menu
SOFT :
This gives smooth edges and the final image will have a soft appearance.
NORMAL : This setting will give a standard finish to the final image.
HARD :
This will give the image a crisp and clear appearance.
SETTING UP THE SHOOTING FUNCTION
LCD
You may adjust the LCD brightness.
1. Turn the camera power on.
2. Rotate the mode dial to the STILL IMAGE mode or MACRO
SHOT mode.
3. Do not turn the LCD monitor off.
4. Press MENU button to display the menu on the LCD monitor.
Press UP ( ) / DOWN ( ) button and select [LCD].
BRIGHTNESS
P2
SELECT
OK SET
LCD
5
8
6
4
2
0
SELECT
OK SET
ADVANCED
5. The cursor can be moved by pressing the RIGHT ( ) button
to the [BRIGHTNESS] sub menu.
6. LCD BRIGHTNESS SELECTION SCREEN as shown
alongside will be displayed by pressing the RIGHT ( )
button.
7. Select the desired brightness value by pressing the UP ( ) /
DOWN ( ) buttons.
The LCD monitor has 9 brightness settings.
8. After selecting the desired brightness value, press the OK
button to confirm the setting.
9. Press the MENU button to cancel the menu display.
LCD
SETTING UP THE SHOOTING FUNCTION
REC. TIME
You can select available recording time.
This menu can be used in MOVIE CLIP mode.
1. Turn the camera power on.
2. Rotate the mode dial to the MOVIE CLIP mode.
3. Do not turn the LCD monitor off.
4. Press MENU button to display the menu on the LCD monitor.
Press UP ( ) / DOWN ( ) button and select [REC.TIME].
5. Press RIGHT ( ) button and [REC.TIME] will be displayed.
6. The cursor can be moved by pressing the RIGHT ( ) button
to the [REC.TIME] sub menu.
7. Select the desired sub menu by pressing the UP ( ) /
DOWN ( ) buttons. The default is 15SEC.
8. After selecting the desired sub menu, press the OK button to
confirm the setting.
9. Press the MENU button to cancel the menu display.
REC.TIME
REC. TIME
20SEC
15SEC
10SEC
SELECT
OK SET
< MOVIE CLIP mode >
SETTING UP PLAY BACK FUNCTIONS
Starting PLAY Mode
Turn the camera on and select PLAY mode (
) on the mode dial. The camera can now play
back the images stored on the CF CARD. Sound can also be added to images in this mode.
You can setup the PLAY mode function by using the camera buttons and LCD monitor.
PLAY mode functions are listed below.
THUMBNAIL, ZOOM
DELETE
VOICE RECORDING
PLAY & PAUSE
SLIDE SHOW, LCD brightness
Play back
LCD monitor
DELETE ALL, FOLDER
QUANTITY, INDEX
Print setting
CANCEL
Reference
The last image stored on the CF CARD will be displayed on the LCD monitor.
The LCD monitor will remain in operation until the camera is switched off.
The menu will not display on the LCD monitor under the following circumstances :
When another button is being pressed.
While image data is being processed.
When there is no battery capacity.
ADVANCED
Camera button
SETTING UP PLAY BACK FUNCTIONS
Setting up play back function by using the camera button
The PLAY mode can be set using the camera button.
THUMBNAIL / ZOOM W button
You can view up to 6 images at a time by using the THUMBNAIL function.
1. Turn the camera power on.
2. Rotate the mode dial to the PLAY mode.
3. An image displays on the LCD monitor.
4. Press the THUMBNAIL (
) button.
The thumbnail display will highlight the image that had been showing at the time the
thumbnail mode was selected.
S410(340)0001.JPG
13/13
Press THUMBNAIL button
2002/ 01/ 01 00 : 00
[ Single display mode ]
Highlighted image
(selected image)
1
2
3
4
5
6
SELECT
OK SET
[ Thumbnail display mode ]
/
/
/
buttons to move to the desired image. Selected image is
5. Press the
highlighted. Icons are displayed to indicate the type of file selected.
6. When viewing a thumbnail image, press the [ZOOM T] button and the selected shot will
show in single display mode.
-
: Movie clip file
-
: DPOF indicator
-
: Sound recorded file
SETTING UP PLAY BACK FUNCTIONS
ZOOM T button
When viewing a single image in PLAY mode, use the zoom T button to enlarge the
selected image.
X2.0
MOVE
EXIT W
< 2X scale of enlargement >
Reference
If an image is enlarged, the ratio indicator will display on the left upper side of the LCD monitor.
Movie clips cannot be enlarged.
If an image is enlarged, a loss of quality may occour.
MENU button
Pressing the MENU button will display the PLAY mode menu. Pressing the MENU button
again will cancel the menu display.
A menu option can be displayed when the following are selected : shot (STILL IMAGE /
MACRO SHOT / MOVIE CLIP )mode, PLAY mode and SETUP mode.
There is no menu available when PC mode is selected.
OK button
When the LCD monitor is turned on, pressing this button allows the changed sub menu to
confirm.
ADVANCED
1. Turn the camera on.
2. Rotate the mode dial to the PLAY mode (
).
3. Select the desired image.
4. Enlarge the image to 2X scale of enlargement by using
the ZOOM T button.
5. Different parts of the image can be viewed by pressing the
/
/
/
buttons.
6. Pressing the ZOOM W button will zoom back to the
original full sized image.
SETTING UP PLAY BACK FUNCTIONS
DELETE button
This deletes images stored on the CF CARD.
1. Turn the camera power on.
2. Rotate the mode dial to the PLAY mode.
) / RIGHT (
) buttons to select the image that you wish to delete.
3. Press the LEFT (
4. When you press the DELETE (
) button, a message will be displayed on the LCD
monitor.
DELETE IMAGE ?
NO
YES
5. Select YES or NO by pressing UP (
) / DOWN (
) button.
- Selecting NO : Press OK button.
The image will be displayed on the LCD monitor.
- Selecting YES : Press OK button.
Once an image has been deleted, the next image in the sequence will
appear on the LCD display.
SETTING UP PLAY BACK FUNCTIONS
MIC / UP button
When the LCD monitor is turned on, pressing the UP (
) button will either cause the
cursor to move up or change a selected sub menu.
When the LCD monitor is not turned on, pressing the UP (
) button will allow a sound
recording to be added to a stored still image.
10SEC
REC
2002/ 01/ 01 00 : 00
[ Being recorded ]
PLAY & PAUSE / DOWN button
When the LCD monitor is turned on, pressing the DOWN (
) button will move the cursor
down or change the sub menu.
When the LCD monitor is not turned on, the DOWN (
) button is used as the PLAY &
PAUSE (
) button.
The PLAY & PAUSE (
) button is used for playing and pausing a sound recorded still
image, movie clip or slide show.
1. Turn the camera power on.
2. Rotate the mode dial to PLAY mode.
) / RIGHT (
) buttons to select a sound recorded still image or a
3. Press the LEFT (
movie clip. Or, select slide show.
4. Press PLAY & PAUSE (
) button.
ADVANCED
1. Turn the camera on.
2. Rotate the mode dial to PLAY mode.
) / RIGHT (
) buttons to select the
3. Press the LEFT (
image that you wish to add sound to.
4. Press MIC (
) button and the sound recording
indicator will display. The sound is being recorded.
5. Recording can be stopped by pressing the MIC (
)
button again. The sound will record for 10 seconds.
SETTING UP PLAY BACK FUNCTIONS
PLAY & PAUSE explained
If an image is showing, but there is no sound (or movement) :
Press the PLAY& PAUSE (
) button to play the sound clip or to start the movie clip.
12/ 13
13/ 13
2002/ 01/ 01 00 : 00
2002/ 01/ 01 00 : 00
[ A sound recorded still image ]
[ A movie clip ]
If the image is playing : The progress is paused.
9SEC
PAUSE
2002/ 01/ 01 00 : 00
[ A sound recorded still image ]
If the PLAY & PAUSE (
or movement will resume.
9SEC
PAUSE
2002/ 01/ 01 00 : 00
[ A movie clip ]
2/ 13
PAUSE
2002/ 01/ 01 00 : 00
[ Slide show ]
) button is pressed when the image is paused, the sound
Reference
When an image is being played back, press the MENU button to cancel the progress.
SETTING UP PLAY BACK FUNCTIONS
Setting up play back function using the LCD monitor
DELETE ALL
This enables you to clear all images from the CF CARD.
Remember that this will permanently delete images. Important shots should be stored on a
computer before deletion takes place.
DELETE ALL
NO
YES
ALL].
5. Shift the cursor to the [DELETE ALL] sub menu by pressing the
SELECT
OK SET
RIGHT ( ) button.
6. Select the desired sub menu by pressing the UP ( ) / DOWN ( ) button and then press the
OK button.
7. Selecting YES or NO.
- Selecting NO : The display is returned to the initial menu, and [DELETE ALL] menu is
highlighted. Press the MENU button, and the menu display will no longer show.
- Selecting YES : [ARE YOU SURE?] message will display. Selecting [NO] makes the menu
display return to the initial display. If you select [YES], [WAITING] message will
display and all the images are deleted.
The menu display will return to the initial display. [NO IMAGES] message will be shown by
pressing the MENU button.
ADVANCED
1. Turn the camera on.
2. Rotate the mode dial to PLAY mode.
3. Press the MENU button to display the menu on the LCD
monitor.
4. Press the UP ( ) / DOWN ( ) button and select [DELETE
SETTING UP PLAY BACK FUNCTIONS
SLIDE SHOW
Images can be displayed continuously at pre-set intervals.
1. Turn the camera power on.
2. Rotate the mode dial to PLAY mode.
3. Do not turn the LCD monitor off.
4. Press the MENU button to display the menu on the LCD monitor.
Press the UP ( ) / DOWN ( ) button and select [SLIDE
SHOW].
5. Shift the cursor to the [SLIDE SHOW] sub menu by pressing
RIGHT ( ) button.
6. Press UP ( ) / DOWN ( ) button and select [START].
7. Press the OK button to start the menu display.
8. To stop the SLIDE SHOW, press the PLAY&PAUSE (
) button.
SLIDE SHOW
START
DIRECTION
TIME
SELECT
Selecting direction
Select SLIDE SHOW DIRECTION
1. Select [DIRECTION] in step 6 by pressing the UP (
) / DOWN (
) button.
2. Shift the cursor to the [DIRECTION] sub menu by pressing RIGHT (
) button.
3. Select the desired sub menu by pressing the UP (
) / DOWN (
) buttons.
4. After selecting the desired sub menu, press the OK button to confirm the setting.
Selecting TIME
Select SLIDE SHOW delay time.
You can select 2 SEC, 3 SEC, 5 SEC, 10 SEC delay time.
1. Select [TIME] in step 6 by pressing the UP (
) / DOWN (
) button.
2. Shift the cursor to the [TIME] sub menu by pressing RIGHT (
) button.
3. Select the desired sub menu by pressing the UP (
) / DOWN (
) buttons.
4. After selecting the desired sub menu, press the OK button to confirm the setting.
OK SET
SETTING UP PLAY BACK FUNCTIONS
DPOF (Digital Print Order Format)
DPOF stores printing information onto the CF CARD, enabling you to have images printed
directly from the CF CARD.
Images can then be printed on DPOF printers, or at an increasing number of photo
laboratories.
This function is not adjusted to Movie clip.
You can select the number of the printing copies.
1. Turn the camera power on.
S410(340)0001.JPG
2. Rotate the mode dial to the PLAY mode.
3. Press MENU button to display the menu on the LCD
1
2
3
monitor.
4. Press UP (
) / DOWN (
) button and select [DPOF].
4
5
6
5. The cursor can be moved by pressing the RIGHT (
)
button to the [DPOF] sub menu.
SHEET
MOVE OK SET
6. Press UP (
) / DOWN (
) button and select
[QUANTITY].
7. Press the RIGHT(
) button, then a menu confirming the number of copies will be
displayed.
- UP (
) / DOWN (
) button : selecting the number of copies.
- RIGHT (
) / LEFT (
) button : selecting the image that you want to print.
8. After you select the number of copies, DPOF indicator and the number of copies will be
displayed.
9. Press the OK button to confirm the setting and the initial menu will be displayed.
10. Press the MENU button to cancel the menu display.
ADVANCED
QUANTITY
SETTING UP PLAY BACK FUNCTIONS
INDEX
The images are printed as a thumbnail on a page by this function.
1. Turn the camera power on.
DPOF
2. Rotate the mode dial to the PLAY mode.
3. Press the MENU button to display the menu on the LCD
monitor.
QUANTITY
4. Press UP (
) / DOWN (
) button and select [DPOF].
INDEX
5. The cursor can be moved by pressing the RIGHT (
)
CANCEL
button to the [DPOF] sub menu.
SELECT
OK SET
6. Press UP (
) / DOWN (
) button and select
[INDEX].
7. Press the OK button to confirm the setting, and [ARE YOU SURE?] message will display.
Selecting [NO] makes the menu display return to the initial display.
If you select [YES], [WAITING] message will display and the INDEX DPOF function is
applied to the stored images.
8. Press the MENU button to cancel the menu display.
SETTING UP PLAY BACK FUNCTIONS
CANCEL
This will cancel the STD(standard) and INDEX DPOF function.
1. Turn the camera power on.
2. Rotate the mode dial to the PLAY mode.
3. Press the MENU button to display the menu on the LCD
monitor.
4. Press UP (
) / DOWN (
) button and select [DPOF].
DPOF
QUANTITY
INDEX
ADVANCED
5. The cursor can be moved by pressing the RIGHT (
)
CANCEL
button to the [DPOF] sub menu.
SELECT
OK SET
6. Press UP (
) / DOWN (
) button and select
[CANCEL].
) / DOWN (
)
7. Press the OK button and select [INDEX] or [STD] by pressing the UP (
button.
8. Press the OK button and [ARE YOU SURE?] message will display.
Selecting [NO] makes the menu display return to the initial display.
If you select [YES], [WAITING] message will display and the [INDEX] or [STD] DPOF
function will be cancelled.
9. Press the MENU button to cancel the menu display.
SETTING UP PLAY BACK FUNCTIONS
FOLDER
Used for changing the folder name to 100SSCAM.
After changing the folder name, this camera will recognize an image that was taken by another digital camera.
1. Turn the camera power on.
2. Rotate the mode dial to the PLAY mode.
3. Press MENU button to display the menu on the LCD
monitor.
4. Press UP( ) / DOWN( ) button and select [FOLDER].
5. The cursor can be moved by pressing the RIGHT( )
button to the [FOLDER] sub menu.
6. Press the OK button to change the folder name.
FOLDER
100SSCAM
SELECT
OK SET
LCD
You may adjust the LCD brightness.
1. Turn the camera power on.
2. Rotate the mode dial to the PLAY mode.
3. Do not turn the LCD monitor off.
4. Press MENU button to display the menu on the LCD monitor.
Press UP ( ) / DOWN ( ) button and select [LCD].
LCD
5
5. Press the RIGHT ( ) button to select [BRIGHTNESS].
6. The cursor can be moved by pressing the RIGHT ( )
SELECT
button to the [BRIGHTNESS] sub menu.
7. Select the desired sub menu by pressing the UP ( ) /
DOWN ( ) buttons. The LCD monitor has 9 brightness settings.
8. After selecting the desired sub menu, press the OK button to confirm the setting.
9. Press the MENU button to cancel the menu display.
8
6
4
2
0
OK SET
SETTING UP THE CAMERA SYSTEM
Starting SETUP mode
Rotate the mode dial to SETUP mode, allowing you to set up the basic camera settings.
FORMAT
This is used for formatting the CF CARD.
Note
All the files in the CF CARD are deleted by [FORMAT] function.
Before formatting the CF CARD, it is advisable to copy important data onto other media as
back-up e.g. floppy disks, hard disks, CD etc.
ADVANCED
1. Turn the camera power on.
FORMAT
2. Rotate the mode dial to the SETUP mode.
NO
FORMAT
3. A menu will display on the LCD monitor.
YES
3 MIN
4. Press UP (
) / DOWN (
) button and select
02/ 01/ 01
[FORMAT].
ON
5. The cursor can be moved by pressing the RIGHT (
)
NTSC
button to the [FORMAT] sub menu.
P1
SELECT
OK SET
6. Select the desired sub menu by pressing the UP (
)/
DOWN (
) buttons.
< SETUP mode >
After selecting the desired sub menu, press the OK
button to confirm the setting.
7. - Selecting [NO] : The menu display returns to the initial display.
- Selecting [YES] : [ARE YOU SURE?] message will display. Selecting [NO] makes the
menu display return to the initial display. If you select [YES], [WAITING] message will
display and the CF CARD is formatted.
SETTING UP THE CAMERA SYSTEM
POWER OFF
This function switches the camera off after a set amount of time in order to prevent
unnecessary battery drainage.
You can set the power to switch off at any specified time(1, 3, 5, 10, 30MIN) from the last
operation. Note that the automatic power off does not operate if the camera is in slide
show or PC mode.
1. Turn the camera power on.
2. Rotate the mode dial to the SETUP mode.
3. A menu will display on the LCD monitor.
4. Press UP ( ) / DOWN ( ) button and select [POWER
OFF].
5. The cursor can be moved by pressing the RIGHT ( )
button to the [POWER OFF] sub menu.
6. Select the desired sub menu by pressing the UP ( ) /
DOWN ( ) buttons. The default is 3MIN.
7. After selecting the desired sub menu, press the OK button to
confirm the setting.
POWER OFF
FORMAT
01 MIN
3 MIN
03 MIN
02/ 01/ 01
05 MIN
ON
10 MIN
NTSC
P1
30 MIN
SELECT
OK SET
SETTING UP THE CAMERA SYSTEM
DATE / TIME
This alters the time and date stored with the images.
The DATE / TIME will only be displayed on the LCD monitor.
When you print the image, the DATE / TIME will not be printed.
Range : 2002~2100 year (leap years and months are corrected automatically).
The default is 2002/01/01 00:00
You will need to check and select the correct Date / Time when : The camera is used for
the first time.The batteries have been removed.
Note
The DATE and TIME will be displayed on the lower end of the LCD monitor in PLAY mode.
The DATE and TIME will not be displayed in SHOT mode and will not printed.
ADVANCED
1. Turn the camera power on.
DATE / TIME
2. Rotate the mode dial to the SETUP mode.
DATE
3. A menu will display on the LCD monitor.
4. Press UP (
) / DOWN (
) button and select
2002/ 01/ 01
00 : 00
[DATE/TIME].
5. Move to [DATE / TIME] sub menu by using the RIGHT
button (
) on the 5-function button.
SELECT
OK SET
Selecting DATE
In step 5, select [DATE] by pressing UP (
)/
DOWN (
) button and press OK button.
Selecting TIME
In step 5, select [TIME] by pressing UP (
) / DOWN (
) button and press OK
button.
6. To select YEAR/ MONTH / DAY or HOUR / MINUTE, press LEFT (
) / RIGHT (
)
button. To change the numbers, press UP (
) / DOWN (
) button.
7. Press the OK button to confirm the setting at the [DAY] or [MINUTE] sub menu.
SETTING UP THE CAMERA SYSTEM
BEEP
A beep will sound when you press the camera button.
1. Turn the camera power on.
2. Rotate the mode dial to the SETUP mode.
3. A menu will display on the LCD monitor.
4. Press UP (
) / DOWN (
) button and select [BEEP].
5. The cursor can be moved by pressing the RIGHT (
)
button to the [BEEP] sub menu.
6. Select the desired sub menu by pressing the UP (
)/
DOWN (
) buttons. The default is ON.
7. After selecting the desired sub menu, press the OK
button to confirm the setting.
BEEP
FORMAT
3 MIN
02/ 01/ 01
ON
ON
NTSC
P1
OFF
SELECT
OK SET
SETTING UP THE CAMERA SYSTEM
VIDEO OUT
The video output signal from the camera can be NTSC or PAL. Your choice of output will
be governed by the type of machine (monitor or TV, etc.) to which the camera is
connected.
Select the correct video standard for the outer monitor. PAL mode can support only
BDGHI.
VIDEO OUT
FORMAT
3 MIN
02/ 01/ 01
P1
ON
NTSC
NTSC
PAL
SELECT
OK SET
ADVANCED
1. Turn the camera power on.
2. Rotate the mode dial to the SETUP mode.
3. A menu will display on the LCD monitor.
4. Press UP (
) / DOWN (
) button and select [VIDEO
OUT].
)
5. The cursor can be moved by pressing the RIGHT (
button to the [VIDEO OUT] sub menu.
6. Select the desired sub menu by pressing the UP (
)/
DOWN (
) buttons. The default is NTSC.
7. After selecting the desired sub menu, press the OK
button to confirm the setting.
The camera will be restarted.
SETTING UP THE CAMERA SYSTEM
LANGUAGE
There is a choice of languages that can be displayed on the LCD monitor.
1. Turn the camera power on.
LANGUAGE
2. Rotate the mode dial to the SETUP mode.
ENGLISH
ENGLISH
3. A menu will display on the LCD monitor.
KOREAN
4. Press UP (
) / DOWN (
) button and select
[LANGUAGE].
5. The cursor can be moved by pressing the RIGHT (
)
button to the [LANGUAGE] sub menu.
P2
SELECT
OK SET
6. Select the desired sub menu by pressing the UP (
)/
DOWN (
) buttons.
7. After selecting the desired sub menu, press the OK button to confirm the setting.
SETTING UP THE CAMERA SYSTEM
RESET
This menu allows you to reset all the camera settings to the default.
1. Turn the camera power on.
2. Rotate the mode dial to the SETUP mode.
3. A menu will display on the LCD monitor.
4. Press UP (
) / DOWN (
) button and select
NO
NO
YES
)
P2
SELECT
OK SET
)/
- Selecting [NO] : The menu display returns to the initial display.
- Selecting [YES] : [ARE YOU SURE?] message will display. Selecting [NO] makes the
menu display return to the initial display. If you select [YES], the
camera setting is returned to the default.
ADVANCED
[RESET].
5. The cursor can be moved by pressing the RIGHT (
button to the [RESET] sub menu.
6. Select the desired sub menu by pressing the UP (
DOWN (
) buttons.
RESET
ENGLISH
SETTING UP THE CAMERA SYSTEM
< TABLE 1 > List of menu and sub menu
: Default.
x : There is no associated menu.
- Remarks
: The setting is maintained even if the power button is turned off.
: The setting is returned to default, once the camera power has been switched off.
: The setting is returned to default after the function has been completed.
Main menu
SHOOTING
FOCUSING
FLASH
Sub menu
SINGLE
x
x
x
x
CONTINUOUS
x
x
x
x
CENTRAL
x
x
x
x
SPOT
x
x
x
AUTO&RED EYE
x
x
x
SLOW SYNCH
x
x
x
x
AUTO
x
x
x
Fill in
x
x
x
x
x
x
x
OFF
LARGE
SIZE
QUALITY
WHITE
BALANCE
EV
METERING
x
x
x
MEDIUM
x
x
x
x
SMALL
x
x
x
x
SUPER FINE
x
x
x
x
FINE
x
x
x
x
NORMAL
x
x
x
x
AUTO
x
x
x
x
DAYLIGHT
x
x
x
x
FLUORESCENT
x
x
x
x
TUNGSTEN
x
x
x
x
+0.2 EV
x
x
x
x
0.0 EV
x
x
x
x
-2.0 EV
x
x
x
x
FULL
x
x
x
x
CENTRAL
x
x
x
x
SPOT
x
x
x
x
x
x
x
Auto
ISO
200
x
x
x
x
400
x
x
x
x
SETTING UP THE CAMERA SYSTEM
x
DPOF
POWER OFF
DATE / TIME
BEEP
VIDEO OUT
LANGUAGE
RESET
QUANTITY
INDEX
CANCEL
FORMAT
1 MIN
3 MIN
5, 10, 30 MIN
DATE
TIME
ON
OFF
NTSC
PAL
ENGLISH
KOREAN
NO
YES
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Menus are subject to change without prior notice.
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
ADVANCED
SOFT
NORMAL
HARD
FORDER
9
LCD
5
BRIGHTNESS
0
30 SEC
REC.
15 SEC
TIME
05 SEC
ON
VOICE
OFF
ON
SELF TIMER
OFF
ON
LANDSCAPE
OFF
DELETE ALL
SLIDE SHOW
SHARPNESS
CONNECTING TO AN EXTERNAL MONITOR
Connecting to an external monitor
In PLAY mode, you can view the stored images or movie clips by connecting the camera
to an external monitor via the video cable. When the camera is connected to an external
monitor, the LCD monitor will be turned off automatically.
When the camera is connected to an external monitor, the menu will be visible on the
external monitor and the menu functions are the same as those indicated on the LCD
monitor.
Selecting the Video output type
You can select an NTSC or PAL video output signal, depending on the external
equipment (monitor or TV) that you wish to connect to.
Refer to page 69 [VIDEO OUT] about selecting the video output from the camera.
Reference
When using a TV as an external monitor, you will need to select the external or AV channel
of the TV.
There will be a digital noise on the external monitor, but it is not a malfunction.
If the image is not in the centre of the screen, use the TV controls to centre it.
PC MODE
Functions of PC mode
Downloading stored images
Once you have downloaded images to your PC, they can be edited and printed.
Refer to the software manual part( page 92, 98) regarding editing software
installation and usage.
In this mode, you can download stored images to your PC through the USB cable.
There is no menu in the PC mode.
When you connect the camera to a PC, ensure that the mode dial is set on PC mode (
).
The Auto focus indicator(green) lamp blinks when the files are transferring via the USB
connection.
Note
The USB Storage Driver must be installed before using PC mode.
Refer to page 86 regarding installation.
To save battery power, it is recommended that you use an AC adaptor(Optional) when
connecting the camera to a computer.
ADVANCED
(1) Rotate the mode dial to PC mode, and turn the camera on.
(2) Connect the camera to your PC with the USB cable.
(3) On your computer’s desktop display, select [My computer] and double click
[Removable Disk]. The image files will then be displayed. Use the COPY or MOVE
function to download the images to your PC.
(4) By using [Digimax Viewer], you can see the stored images in the CF CARD
directly on the PC monitor and you can copy or move the image files.
(5) If you wish to edit downloaded images, you can use [MGI PhotoSuite III SE].
IMPORTANT NOTES
Caution!
Your new Samsung camera is a precision instrument. Whilst it is designed to withstand
general wear and tear, there are some important points that will help you get maximum
service and reliability from your camera.
The following should be avoided :
Severe changes in temperature and humidity.
Dust and dirt.
Direct sunlight or the inside of a vehicle in hot weather.
Environments where there is high magnetism or excessive vibration.
Areas with high explosives or highly flammable materials.
Pesticides, etc.
Sand can be particularly troublesome to cameras.
Sand or other small particulates can cause severe malfunctions.
Ensure that there is no contact with sand or similar particles.
Extremes in temperature may cause problems.
If the camera is transferred from a cold to a warm and humid environment, condensation
can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait
for at least 1 hour until all moisture is dispersed. Moisture build up can also occur in CF
CARD. If this happens, turn off the camera and remove the CF CARD.
Wait until the moisture has dispersed.
IMPORTANT NOTE
If the digital camera is not used for a long period, an electric discharge can occur. It is a
good idea to remove the batteries and CF CARD if the camera is not used for some time.
If the camera is exposed to electronic interference, it will turn itself off to protect the CF
CARD.
DO NOT attempt to disassemble or modify the camera. It contains delicate parts and
there are high voltage circuits that can cause electric shocks.
Under certain conditions, static electricity can cause the flash unit to fire.
This is not harmful to the camera and is not a malfunction.
When images are uploaded or downloaded, the data transfer may be affected by static
electricity. In this case, disconnect and re-connect the USB cable before trying the transfer
again.
ADVANCED
Maintenance
Use a soft brush (available from photo stores) to GENTLY clean the lens and LCD
assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid can be
used.
Clean the camera body with a soft cloth. Do not allow this camera to come into contact
with solvent materials such as benzol, insecticide, thinners etc.
This may damage the body shell of the camera and also affect its performance.
Rough handling can damage the LCD monitor. Take care to avoid damage and keep
the camera in its protective carry case at all times.
IMPORTANT NOTE
Warning indicator
There are several warnings that may appear in the LCD display :
Warning message
Reason for message
Remedy
No CF CARD.
The camera cannot
recognize the CF CARD.
Insert a CF CARD.
Remove and re-insert the CF
CARD.
Turn the camera off, wait a few
seconds and turn it on again.
NO IMAGES
There are no images stored
on the CF CARD.
Take images.
Insert a CF CARD that is
holding some images.
CARD FULL
There is insufficient memory
capacity to take an image.
Insert a new CF CARD, or
delete stored images to free
up some memory.
NO CARD
BEFORE CONTACTING A SERVICE CENTER
Please check the following
Symptom
Cause
The camera
doesn’t switch on.
There is low battery capacity.
AC Power Adapter is not
connected.
Insert fresh batteries.
Connect AC Power Adapter.
Batteries drain
quickly.
The batteries are exhausted.
Insert fresh batteries.
Camera is turned off
automatically due to the Auto
power function.
Adapter plug is not connected
securely.
Press power switch to reactivate camera.
Camera being used in low
temperatures.
Keep camera in warm conditions
(i.e. inside a coat or jacket) and
only remove it in order to take
images.
Insert fresh batteries (all of
which should be of the same
type)
Mixing old and new batteries or
battery types.
CF CARD is not inserted
Camera does not
take images when
pressing the Shutter
button.
The CF CARD has not been
formatted.
The CF CARD is full.
The camera power is off.
The batteries are exhausted
The mode dial is positioned
incorrectly.
Remove and re-insert plug.
After turning the camera off,
insert card.
Format the card.
Insert new CF CARD.
Turn the camera power on.
Insert fresh batteries
Rotate the mode dial to
SHOT mode.
ADVANCED
The camera powers
down whilst in use.
Remedy
BEFORE CONTACTING A SERVICE CENTER
Please check the following
Symptom
Cause
Remedy
The focus mode is not
correct.
If the subject is closer than
0.8m, select MACRO SHOT
mode.
The flash does not
fire.
FLASH OFF mode has been
selected.
Dis-engage FLASH OFF
mode.
Incorrect date and
time is displayed.
The date and time have been
set incorrectly or the camera
has adopted the default
settings.
Reset the date and time
correctly.
Refer to page 67.
Camera malfunction
Remove /re-insert batteries
and switch camera on.
Incorrect CF CARD format
Re-format the CF CARD.
Refer to page 65.
WHITE BALANCE setting is
incorrect.
Select appropriate WHITE
BALANCE.
Refer to page 44.
Exposure is excessive.
Reset exposure compensation.
Refer to page 46.
The images are
unclear.
The camera buttons
do not operate.
CF CARD error.
Color of image
different to original
scene.
Images are too
bright.
BEFORE CONTACTING A SERVICE CENTER
Symptom
Cause
The play back
display is not very
clear
The lens or LCD monitor is
smudged or dirty.
Clean the lens or LCD
No image on
external monitor
The external monitor has not
been connected properly with
the camera.
There are incorrect files in the
CF CARD.
Check the connection
cables.
Check the connection.
When using the
PC’s explorer,
‘Removable Disk’
file does not show.
Cable connection is
incorrect.
The camera is off.
There are no batteries, the
batteries are exhausted or
the AC adapter is not
connected.
The operating system is not
Windows 98, 98SE, 2000,
ME, XP. Alternatively the PC
does not support USB.
USB driver is not installed.
The mode dial is not set on
PC mode.
Remedy
Turn the camera on.
Insert new batteries or check
the adapter connection.
Install Windows 98, 98SE,
2000, ME, XP to PC that
supports USB.
Install “USB Storage Driver”
Rotate the mode dial to PC
mode
ADVANCED
Insert CF CARD that has
correct files.
SPECIFICATIONS
Image Sensor
Lens
Viewfinder
Focusing
Shutter
Exposure
Flash
Sharpness
White Balance
Voice memo
Shooting
Self-timer
Storage
Type
Effective Pixels
Total Pixels
Focal Length
F No.
Digital Zoom
Optical
Viewfinder
LCD Monitor
Type
Range
Type
Speed
Control
Compensation
ISO Equivalent
Modes
Range
Recharging Time
Still image
/Macro shot
Movie Clip
Media
File Format
Image Size
1/1.8” CCD
Approx. 4.0 (Digimax 340 : 3.2) Mega pixels
Approx. 4.1 (Digimax 340 : 3.3) Mega pixels
SHD Lens f = 7.0 ~ 21.0mm (35mm film equivalent : 34 ~ 102mm)
F2.6 ~ F4.5
STILL IMAGE/MACRO SHOT mode : 2X
PLAY mode : 2X
Real image optical viewfinder
1.6" color TFT LCD
TTL autofocus (Central / Spot)
Normal : 0.8m ~ infinity
Macro shot : 0.2 ~ 0.8m
Mechanical and Electronic shutter
2 ~ 1/2,000 sec.
Program AE (Full / Central / Spot)
2EV (0.5EV steps)
Auto, 200, 400
Auto & Red - eye reduction / Slow sync / Auto / Fill-in flash / Flash off
Wide : 0.5 ~ 3.0m, Tele : 0.5 ~ 2.0m
Approx. 7 sec.
Soft / Normal / Hard
Auto / Daylight / Fluorescent / Tungsten
Voice recording and play back for still image
Modes : Single / Continuous
Size : 320x240
Recording time : 5 ~ 30 sec. (5sec. steps)
10 sec.
CompactFlashTM card (Up to 512MB guaranteed)
Still image/Macro shot : JPEG (DCF), DPOF
Movie Clip : AVI (MJPEG)
D-410 L : 2272x1704 pixels, M : 1600x1200 pixels, S : 640x480 pixels
D-340 L : 2048x1536 pixels, M : 1024x768 pixels, S : 640x480 pixels
SPECIFICATIONS
Capacity
(16/32MB)
Image Play
Interface
Camera Driver
Application
System Requirements
For Windows
For Macintosh
Digimax 410 / Digimax 340
PC with processor better than MMX Pentium 233MHz (XP : Pentium II 300MHz)
Windows 98/98SE/2000/ME/XP
Minimum 32MB RAM (XP : 128MB)
110MB of available hard-disk space
USB port
CD-ROM drive
800 x 600 pixels, 16-bit color display compatible monitor
(24-bit color display recommended)
Power Mac G3 or later
Mac OS 9.0~10.1.3
Minimum 32MB RAM
110MB of available hard-disk space
USB port
CD-ROM drive
QuickTime 4.0 or later for Movie Clip
Specifications are subject to change without prior notice.
ADVANCED
Power Source
Dimensions (WxHxD)
Weight
Software
D-410 Large : Super fine 6/12, Fine 12/25, Normal 25/51
Medium : Super fine 12/25, Fine 25/51, Normal 51/103
Small : Super fine 77/155, Fine 124/249, Normal 182/366
D-340 Large : Super fine 8/17, Fine 12/25, Normal 19/38
Medium : Super fine 19/38, Fine 38/77, Normal 77/155
Small : Super fine 77/155, Fine 124/249, Normal 182/366
* These figures are measured under Samsung’s standard conditions and
may vary depending on shooting conditions and camera settings.
Single image/ Thumbnails / Slide show
Digital output connector : USB
DC power input connector : 6.0V
Video output : NTSC / PAL (user selectable)
Audio : Mono
4 x AA alkaline / 4 x Ni-MH batteries
AC adapter (optional)
118.7x66.5x50mm / 4.7x2.6x2.0 in
245g / 8.6oz (without batteries and card)
Storage Driver (Windows98/98SE/2000/ME/XP, Mac OS 9.0~10.1.3)
MGI PhotoSuite, Digimax Viewer
SOFTWARE MANUAL
Please ensure that you read the instruction manual carefully before use
Software Notes
The attached software is a camera driver and image editing software tool for Windows.
Under no circumstances should all or part of either the software or the user manual be
reproduced.
Copyright for the software is licensed only for use with a camera.
In the unlikely event of a manufacturing fault, we will repair or exchange your camera.
We cannot, however, be held responsible in any way for damage caused by
inappropriate use.
Using a Hand-made PC or a PC that has not been guaranteed by a manufacturer is not
covered by the Samsung warranty.
Before reading this manual, you should have a basic knowledge of computers and O/S
(Operating Systems).
Windows is a registered trademark of Microsoft.
Macintosh, Mac is the registered trademark of Apple computer, USA.
About software
USB Storage Driver
This camera uses a USB Storage Driver as the camera driver. You can use the camera
as a USB card reader. After installing the driver and connecting this camera to the PC,
you can find [Removable Disk] in [Windows Explorer] or [My computer].
USB Storage Driver is provided only for Windows.
USB Driver for MAC is not included with the Application CD. But you can use the
camera with Mac OS 9.0~10.1.3.
Digimax Viewer
You can view the stored images in the CF CARD directly on the PC monitor. And you
can copy, move, delete the image and scale up /downscale the image size with Digimax
Viewer. For windows only.
MGI PhotoSuite
SE
Image editing program for downloaded images.
For Windows only.
HOW TO SET UP THE SOFTWARE FOR WINDOWS
How to set up the software
After inserting the CD-ROM provided with this camera into the CD-ROM drive, the
following frame is automatically run.
1. Driver : This enables images to transfer between the camera and PC.
Driver installation for Windows : refer to page 86
2. Image Viewer : Digimax Viewer. Refer to page 90
3. Application : MGI PhotoSuite SE : image editing program. Refer to page 92.
4. Web Site Link : You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
If you insert application CD for Digimax 340 in the CD-ROM drive, all the ‘Digimax 410’ text
will be changed to ‘Digimax 340’
Check the system requirements (page 83) before setting up the driver.
You should allow 5~10 seconds for running the automatic setup program according to the
capability of the computer. If the frame does not show, run the [Windows Explorer] and select
[Samsung.exe] in the CD-ROM Drive root directory.
SOFTWARE
Reference
HOW TO SET UP THE SOFTWARE FOR WINDOWS
Setting up USB driver for Windows
To use this camera with a PC, install the Camera Driver first. After this has been done, the
stored images in the camera can be moved to the PC and can be edited by an image editing
program.
1
Click [Storage Driver] menu on the Autorun
frame and the ‘Welcome’ Window will open.
Click [Next >].
2
[Storage Driver] installation has started.
3
Installation is complete.
Restart your computer.
HOW TO SET UP THE SOFTWARE FOR WINDOWS
Setting up USB driver for Windows
4
5
6
After restarting the computer, connect the PC to the camera with the USB cable.
Turn the camera power on with the mode dial set on PC mode.
[Found New Hardware Wizard] will appear and the computer
will recognize the camera.
USB Driver installation is complete. After installation,
[Removable Disk] will be displayed under [My computer] as
shown alongside.
Note
SOFTWARE
Before connecting the camera to the PC, you must install the camera driver.
After driver installation, you have to restart the computer.
If the camera is connected to PC before Driver installation, [Add Found New Hardware
Wizard] will appear. In this case, follow [Add Found New Hardware Wizard] to install the
camera driver.
When windows search for new drivers in its database on your hard drive,
select [Driver Setup] folder by browsing the Application CD.
Should the computer not find the Camera Driver after installation, please try one or more of
the following measures.
1. Delete the camera driver, and re-install the driver.
2. Refer to FAQ(refer to page 115) to check for a possible solution to the problem.
If your PC’s central processing unit is VIA Chip (This is shown in the USB Host Controller),
download the patch file from the Samsung Camera web page.
(http://www.samsungcamera.com).
HOW TO SET UP THE SOFTWARE FOR WINDOWS
Setting up DirectX 8.1 for Windows
DirectX is a windows technology that enables higher performance in graphics and sound
when you’re playing games or watching video on your PC.
1
After driver installation, [Microsoft DirectX 8.1
Setup] window will open automatically. Click
[Yes].
2
The software license agreement window will
open. If you agree to it, click [Yes]. This will
take you to the next step.
If you disagree, click [No] and the installation
program will be canceled.
3
[DirectX 8.1] installation has started.
HOW TO SET UP THE SOFTWARE FOR WINDOWS
Setting up DirectX 8.1 for windows
4
Your system will be updated.
5
Installation is complete. Restart your computer.
SOFTWARE
HOW TO SET UP THE SOFTWARE FOR WINDOWS
Setting up Digimax Viewer
This software is only compatible with Windows.
1
2
Click [Digimax Viewer] on the Autorun frame.
3
The Software License Agreement window will
display.
If you agree to it, click [Yes]. This will take you
to the next step. If you disagree, click [No] and
the installation program will be canceled.
4
Select destination folder and click [Next].
The installation window will be displayed as
shown alongside. Click [Next].
HOW TO SET UP THE SOFTWARE FOR WINDOWS
Setting up Digimax Viewer
Select Program folder and click [Next].
6
The setup status window will be displayed.
7
Installation is completed.
If you wish to open this program automatically
whenever the camera connects to PC,
click [I would like to launch Digimax Viewer]
Checkbox. And click [Finish].
SOFTWARE
5
HOW TO SET UP THE SOFTWARE FOR WINDOWS
Setting up the MGI PhotoSuite lll SE
This software is only compatible with Windows.
1
2
Click the MGI PhotoSuite lll SE menu on autorun frame.
3
A Welcome window will be displayed.
Click [Next >] to move to the next step.
4
The Software License Agreement window will
be displayed. If you agree to this, click [Yes],
the window will then move to the next step.
If you disagree, click [ No ] and the installation
program will be canceled.
Select language.
HOW TO SET UP THE SOFTWARE FOR WINDOWS
Select setup type and click [Next]
Full :
the program will be installed with all
the options.
Custom : you can choose what you would like
to install.
6
Start Copying Files window will be displayed.
Click [Next >] to start installation.
7
The MGI Registration window will be displayed
before completing installation.
Register : send your personal information to
MGI for registration.
Cancel : postpone registration.
SOFTWARE
5
HOW TO SET UP THE SOFTWARE FOR WINDOWS
8
Installation is complete.
If installation is completed correctly, Autoplay is
registered automatically into the start menu
program as shown alongside.
CONNECTING THE CAMERA FOR WINDOWS
Connecting USB cable to the Camera for Windows
To download images, you will need Windows 98 or later and a USB port on your
computer.
1
2
3
4
Connect the USB cable to the USB port on the
computer.
Connect the other end of the USB cable to the
USB connection terminal on the camera.
Set the mode dial to PC mode (
).
Switch the camera on.
Removable Disk
To use this camera as a Removable Disk, install the USB Driver.
Before turning the camera power on, connect the camera to the PC with the USB cable
and rotate the mode dial to PC mode.
Click [Removable Disk] under [My computer] or [Windows Explorer].
Image files stored in the Removable Disk can be transferred to the PC.
SOFTWARE
1
2
3
REMOVABLE DISK
Note
Important information whilst using the Removable Disk
The [Removable Disk] indicator will not show when the camera power is off.
We recommend that you should copy the images to the PC to view them. Opening images
directly from the removable disk may be subject to unexpected disconnection.
When uploading images from the PC to the camera, ensure that the uploaded file names
are not the same as those already stored on the CF CARD.
Files with the same file name but different extensions
(e.g : S4100001.jpg/S4100001.avi), JPG file format will
appear first. And if the displayed file is deleted, all the same
file name images are deleted.
When you upload a file that is not taken by this camera to Removable Disk, the ERROR
FILE message will be displayed on the LCD monitor in PLAY mode, and nothing is
displayed in THUMBNAIL mode.
The green lamp next to the viewfinder will blink, when a file is transferred (copy or
deletion) between the PC and camera. Do not remove the USB cable or rotate the mode
dial until the lamp stops blinking. To remove the USB cable, use the [Unplug or Eject
Hardware] icon on the task bar. In Windows 2000, take extra care, as the following may
occur.
1. When an image file from the Removable Disk is deleted : The green lamp will blink for
about 10 seconds after file deletion is completed.
2. When an image file is transferred between PC and Removable Disk : The green lamp
will blink again 15-20 seconds after the first time when it blinks.
The work is not completed until the lamp has finished blinking.
When uploading the sound recorded image to the camera, you should upload both WAV
and JPG files. For example, if you upload S4100001.wav file to the camera, the
S4100001.jpg file has to be uploaded too.
HOW TO USE THE SOFTWARE
Digimax Viewer
This software is only compatible with Windows.
To open Digimax Viewer, click the [ Start
Programs
Samsung
Digimax Viewer 1.0 ] and Digimax Viewer 1.0 will then open.
The stored images will be displayed as thumbnail image.
You can easily copy, move and delete the stored images.
Digimax Viewer 1.0
If the Auto Launch option is selected, the program will execute automatically after
recognizing the camera.
SOFTWARE
Refer to [Help] menu in Digimax viewer for further information.
HOW TO USE THE SOFTWARE
MGI PhotoSuite
SE
This software is only compatible with Windows.
To open MGI PhotoSuite lll SE, click the [Start
Programs
MGI PhotoSuite lll SE
MGI PhotoSuite lll SE] and MGI PhotoSuite lll SE will then open.
HOW TO USE THE SOFTWARE
MGI PhotoSuite
SE
An introduction to the Welcome screen
Get
Get images.
Prepare
A number of photo editing activities can be performed within this
module.
Compose
Use your photos in a variety of fun, creative and interesting ways.
Organize
Organize your photos and other media files into albums.
Save your results to show to others.
Print
Print hard copies of photos and projects.
SOFTWARE
Share
HOW TO USE THE SOFTWARE
Introduciton to the navigation bar
Back
Return to the previous step.
Home
Return to Welcome screen.
Help
Display help window.
Get
Get images.
Prepare
A number of photo editing activities can be performed within this
module.
Compose
Use your photos in a variety of fun and interesting ways.
Organize
Organize your photos and other media files into albums.
Share
Save your results to show to others.
Print
Print hard copies of photos and projects.
Browse
Browse the web site.
HOW TO USE THE SOFTWARE
MGI PhotoSuite lll SE
GET
: Get images
To obtain images from the computer
To acquire images, Click the large [Get] button
on the Welcome screen, or the [Get] button on
the Navigation bar. Click [Computer] from the
list of options displayed on the activity panel.
2
The Open file selector is displayed. Now select
the image file and click [open].
3
The Welcome screen will change to the next
work step, with the selected image displayed.
SOFTWARE
1
HOW TO USE THE SOFTWARE
MGI PhotoSuite lll SE
When you obtain images from the digital camera.
Note
When you connect a PC to the Camera, use the following sequence :
1. Turn the Mode dial to PC mode.
2. Turn the power on.
3. Connect the USB cable.
Refer to page 95 for more information about connecting the cable.
1
To acquire images, click the large [Get] button
on the Welcome screen, or the [Get] button on
the Navigation bar. Click [Computer] from the
list of options displayed on the activity panel.
2
The Open file selector is displayed. Click [Look
in :] to choose [Removable Disk( :)] and click
[open] for the open file window to be displayed.
HOW TO USE THE SOFTWARE
MGI PhotoSuite lll SE
3
Select [Dcim
100sscam] folder. Then select
image and click [Open].
4
The Welcome screen will change to the next
work step, with the selected image displayed.
When you use the Digimax camera, only [Computer] and [Album]
from the list of options displayed are available. You will be able to
obtain images from the digital camera.
[Computer and Album Only]
SOFTWARE
Note
HOW TO USE THE SOFTWARE
MGI PhotoSuite lll SE
Acquiring images from an Album.
1
To acquire images, click the large [Get] button
on the Welcome screen, or the [Get] button on
the Navigation bar. Click [Album] from the list of
options displayed on the activity panel.
2
After selecting Album on the [ Choose a
photo album], click an image in the album and
click [Open].
3
The Welcome screen will change to the next
work step, with the selected image displayed.
Refer to page 108 for more information about creating an Album.
HOW TO USE THE SOFTWARE
MGI PhotoSuite lll SE
PREPARE
When the image is loaded, the step changes to Prepare automatically.
Menu for the [PREPARE] step
Rotate & Crop
You can rotate, flip or crop images along with a
host of others.
Touchup
Remove Red eye, Remove Scratches etc.. are
available in this menu.
Special Effects
A number of special effects can be applied.
Stitching
Join a series of photos together to create a
sweeping panoramic effect.
SOFTWARE
HOW TO USE THE SOFTWARE
MGI PhotoSuite lll SE
COMPOSE
Add Text , Compound Images etc.. are available in this step.
Menu for the [COMPOSE] steps
Collages : A collage consists of several photos
or sections of photos arranged together on a
common background.
Photo Layouts : The Photo Layouts activity
includes many collage and layout options.
Cards & tags : Use your photos to create items
such as Gift Tags, Greeting Cards, Invitations,
Postcards, and Sports Cards.
Calendars : Use your photos to create a variety
of calendars (monthly, quarterly, seasonal,
yearly).
Collections : Photos can also be used to create
a variety of items for business purposes.
Add frames and boarder effects to your photos with
the predefined templates.
HOW TO USE THE SOFTWARE
MGI PhotoSuite lll SE
ORGANIZE
Organize your photos and other media files into albums.
Menu for the [ORGANIZE] step
Choose a photo album to view or edit
Select Album : To create an Album, click
[Organize] in the welcome screen or navigation
bar.
Album.. : Open Master Album.
SOFTWARE
Select a photo, and choose an action below.
Open : Open selected image.
Delete : Delete selected image.
Properties.. : view image information.
Choose an action to manage your album.
Add : click [Add] to add an image to an Album.
Sort : click [Sort] to Sort saved images.
Search : click [Search] to Search saved images.
Reset : click [Reset] to reset the setting.
Update : click [Update] to update images.
Create Slide Show.. : click [Create Slide Show]
to create a Slide Show.
Always start on this page : If you select this
option, the program will start in [Organize].
HOW TO USE THE SOFTWARE
MGI PhotoSuite lll SE
Creating an Album
1
To create an Album, click the large Organize button on the Welcome screen, or the
Organize button on the Navigation bar.
2
Click [Album..] in [
view or edit.]
3
The Master Album window will be displayed,
then click [New..].
4
Enter a new Album name in the New Album
window and click [OK]. A new album will now
be created.
Choose a photo album to
HOW TO USE THE SOFTWARE
MGI PhotoSuite lll SE
SHARE
Saving images
Saving or sharing images.
Menu for the [SHARE] step
Save
To save the active file according to its
current name and path.
Save As
To assign a new name or path to the file.
Send E-mail
e-mailing images.
Slide Show
Viewing images as a slide show.
2
Click [SAVE] and the Save Project window will
be displayed. Enter the file name and click
[Save] to save an image.
SOFTWARE
1
HOW TO USE THE SOFTWARE
MGI PhotoSuite lll SE
PRINT
Printing images
1
You can print images.
2
Choose a printer, an orientation, the print size,
and the number of copies. You can then print
the images.
Menu for the [PRINT] step
Print
Printing images.
Print Multiples
Print multiple copies of a photo or project,
or one copy of each of the photos included
in an album, according to a predefined
template.
Reference
For more information, please refer to the Help file in [Help
MGI PhotoSuite lll help].
REMOVING THE USB DRIVER FOR WINDOWS
Removing USB Driver for Windows
1
Click [Add/Remove programs] in Controller.
2
After selecting [Samsung Digimax 410], click
[Add/Remove] and the following window will be
displayed.
SOFTWARE
REMOVING THE USB DRIVER FOR WINDOWS
Reference
If you are a Windows 2000/ME/XP user, follow the procedure below to remove the USB
Driver.
1. Connect the PC to the camera (PC mode, power on)
2. As mentioned above, remove [Samsung Digimax 410]
in [Add/Remove programs]
3. Click [Unplug or Eject Hardware] icon on the task bar.
Click [Stop] on the [Unplug or Eject Hardware] window
and click [Ok] on the next window.
4. Click [System] on Control Panel.
Trace [Device Manager Universal serial bus
controller Samsung USB Mass Storage Device]
and click the right mouse button. Then the
following window will be displayed.
Click [Remove] to remove the USB Driver.
Restart the computer
CONNECTING THE CAMERA FOR MAC
Connecting the USB cable to the camera for MAC
The USB port has to be in the Macintosh or keyboard.
1
2
3
4
Connect the USB cable to the USB port on the
Macintosh.
Connect the other end of the USB cable to the
USB port of the camera.
Rotate the mode dial to PC mode (
).
Switch the camera on.
SOFTWARE
HOW TO INSTALL AND USE THE USB DRIVER FOR MAC
Setting up the USB Driver for MAC
1
2
The USB Driver for MAC is not included with the Application CD as MAC OS support the
camera driver.
Check MAC OS.
This camera is available in MAC OS 9.0~10.1.3.
Note
Before connecting the camera to MAC, check that the CF CARD is inserted in the card slot.
3
4
Connect the camera to the Macintosh and turn the camera power on in PC mode.
A new icon (Untitled) will be displayed on the desktop after connecting the camera to the
MAC.
Using a USB Driver for MAC
1
2
Double click a new icon (Untitled) on the desktop and the folder in the CF CARD will be
displayed.
Select an image file and copy or move it to MAC.
FAQ
About USB
Please check the following if the USB connection malfunctions.
[Case 1] The camera power is off.
Turn the camera power on.
We recommend using an AC power adapter in PC mode. If you use batteries,
check the battery condition.
[Case 2] The mode dial is not set to PC mode.
Rotate the mode dial to PC mode.
PC interfacing is available only in PC mode.
[Case 3] USB Driver is not installed correctly.
Install the USB Driver correctly. Refer to pages 86
[Case 4] The USB cable is not connected or you are using a cable with an incorrect
specification.
Use a USB cable with the correct specification.
[Case 5] The CF CARD is not inserted or the camera can’t recognize the CF CARD.
Turn the camera power off and insert the CF CARD again.
[Case 6] Occasionally the computer recognizes the USB as another device.
Install the camera driver correctly.
Connect the USB cable again and turn the camera power on.
Then the computer should now recognize the camera.
SOFTWARE
Turn the camera power off and remove the USB cable.
FAQ
About USB
[Case 7] There is an unexpected error during file transfer.
Turn the camera power off and on again. Transfer the file again.
[Case 8] How do I know my computer supports a USB Interface?
Check the USB port in your computer or keyboard.
Check OS version. USB Interface is available in Windows 98, 98SE, 2000, ME
.XP.
Check [Universal serial bus controller] in Device Manager.
Do the following to check [Universal serial bus controller].
Win 98/ME : Trace [start
setting
controller
system
Device Manager
Universal serial bus controller].
Win 2K : Trace [start
Manager
Win XP : Trace [start
system
setting
controller
system
Hardware
Device
Universal serial bus controller].
Control Panel
Hardware
Performance and Maintenance
Device Manager
Universal Serial Bus
controller].
There must be USB Host Controller and USB root hub under [Universal serial bus
controller].
When all the conditions mentioned above are met, the computer can support the
USB interface.
[Case 9] When using USB hub.
There may be a problem in connecting the camera to the PC through the USB
hub if the PC and the hub are not compatible. Wherever possible, connect the
camera to the PC directly.
[Case 10] Are other USB cables connected to the PC?
The camera may malfunction when it is connected to the PC at the same time as
another USB cable. In this case, disconnect the other USB cable, and connect
only one USB cable to the camera.
MEMO
SOFTWARE
MEMO
MEMO
SOFTWARE
SAMSUNG TECHWIN CO., LTD.
OPTICS & DIGITAL IMAGING DIVISION
145-3, SANGDAEWON 1-DONG, JUNGWONGU,SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121
TEL : (82) 31-740-8086,8088, 8090, 8092, 8099
FAX : (82) 31-740-8398, 8399
SAMSUNG OPTO-ELECTRONICS GMBH
SAMSUNG HAUS
AM KRONBERGER HANG 6, 65824 SCHWALBACH,
GERMANY
TEL : (49) 6196-66 53 03
FAX : (49) 6196-66 53 66
SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
HEADQUARTERS
40 SEAVIEW DRIVE, SECAUCUS, NJ07094
TEL : (1) 201-902-0347
FAX : (1) 201-902-9342
SAMSUNG FRANCE S.A.S.
BP 51 TOUR MAINE MONTPARNASSE
33, AV .DU MAINE
75755, PARIS CEDEX 15, FRANCE
HOTLINE PHOTO NUMÉRIQUE : (33) 1-44757389
TEL : (33) 1-4279-2282/5
FAX : (33) 1-4320-4510
WESTERN REGIONAL OFFICE
18600 BROADWICK ST.,
RANCHO DOMINGUEZ, CA 90220
TEL : (1) 310-537-7000
FAX : (1) 310-537-1566
SAMSUNG OPTO-ELECTRONICS UK LTD.
SAMSUNG HOUSE, 3 RIVERBANK WAY,
GREAT WEST ROAD, BRENTFORD,
MIDDLESEX,TW8 9RE, U.K.
TEL : (44) 20-8232-3280
FAX : (44) 20-8569-8385
Internet address - http : //www.samsungcamera.com/
The CE Mark is a Directive conformity mark of the
European Community (EC)
SAMSUNG TECHWIN MOSCOW OFFICE
KORP. 14 37-A LENNINGRADSKY PRO-KT
MOSCOW, 125167, RUSSIA
TEL : (7) 095-258-9296, 9298, 9299
FAX : (7) 095-258-9297
TIANJIN SAMSUNG OPTO-ELECTRONICS CO.,LTD.
7 PINGCHANG ROAD NANKAI DIST., TIANJIN
P.R CHINA
POST CODE:300190
TEL : (86) 22-2761-8867
FAX : (86) 22-2761-8864