advertisement
COLOUR TELEVISION
INSTRUCTIONS
Contents
Safety precautions ......................... 2
Connections .................................. 3
Initial settings ................................. 3
This illustration shows AV-14UMG7.
AV-21B17
AV-21BMG7
AV-21BMG7B
AV-21BMG7S
AV-21Q17
AV-21QMG7
AV-21QMG7B
AV-21Y17
AV-21YMG7
AV-21YMG7B
AV-14A17
AV-14AMG7
AV-14U17
AV-14UMG7
AV-14UMG7B
Remote control buttons and functions ................................. 4
TV buttons and functions ............... 4
Using the TV’s MENU .................... 5
Presetting TV channels ................. 6
Using the timer .............................. 7
Playing game ................................. 7
Sound and Colour system in your country or region ........................... 7
Troubleshooting ............. Back cover
Specifi cations ................ Back cover
The illustrations of AV-14UMG7 is used in this instruction manual for explanation purpose. Your TV may not look exactly the same as illustrated.
Downloaded From TV-Manual.com Manuals
GGT0130-001B-H
Thank you for buying this JVC colour television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
• The apparatus shall not be exposed to dripping or splashing and that no objects fi lled with liquids, such as vases, shall be placed on the apparatus.
• Do not allow objects or liquid into the cabinet openings.
CAUTION
TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING
RULES REGARDING THE USE OF THIS TV.
• Never block or cover the ventilation openings.
• Never install the TV where good ventilation is unattainable.
• When installing this TV, leave spaces for ventilation around the TV of more than the minimum distances as shown.
• Operate only from the power source indicated on the rear of the TV.
• Avoid damaging the power cord and mains plug. When unplugging the TV, grasp the mains plug. Do not pull on the power cord.
• This TV can be turned on/off power by connecting/disconnecting the AC plug into
AC outlet. While this TV is being installed, enough space should be reserved for connection/disconnecting the AC plug into
AC outlet by hand.
In the event of a fault, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover.
POWER /
ON TIMER
• The surface of the TV screen is easily damaged.
Be very careful with it when handling the TV.
Should the TV screen become soiled, wipe it with a soft dry cloth.
Never rub it forcefully. Never use any cleaner or detergent on it.
• Insert two batteries by following the and polarities and inserting
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work properly, fi t new batteries.
The supplied batteries are for testing, not regular use.
Connections
CAUTION
Ensure to turn off all equipments including the TV before connecting the
AC mains plug to the AC outlet.
Connecting to the aerial cable and VCR
* This illustration
shows AV-14UMG7.
TV rear terminals
VHF/UHF outdoor aerial
1
Initial settings
Turn on the TV.
2
JVC logo appears.
Select a language.
LANGUAGE or wait 15 seconds to run Setup Tour
75-ohm coaxial cable (not supplied)
FRANÇAIS
OK : AUTO PROGRAM
DISPLAY : BACK
MENU : EXIT
Select
Searching for the channels.
AUTO PROGRAM
VH
OK : MANUAL PROGRAM to stop or wait until AUTO
PROGRAM fi nishes
OR
VCR (for recording)
Connecting to the TV front terminals
* This illustration shows AV-14UMG7.
VCR
3
Proceed to AUTO PROGRAM
Note
This Language Menu’s on screen is used for explanation purpose only.
Your TV may not show the same as this on screen.
Search a channel manually or fi ne-tune a channel.
MANUAL PROGRAM
CH / CC
To perform manual
CH
08
10
12 search and fi ne-tune
VOLUME-/+ : SEARCH-/+
(FINE),
\ page 6.
/ : FINE-/+
DISPLAY : SOUND SYSTEM
or
To complete
Setup Tour
To restart Setup Tour after above setup has completed
(while the cursor is pointing to PICTURE
MODE and within 3 seconds)
Headphones TV front terminals Camcorder
After all the connections have been made, insert the mains plug to the AC outlet.
Downloaded From TV-Manual.com Manuals
TV game
If you press when LANGUAGE is displayed (Step 2), the screen will exit to MENU.
3
Remote control buttons and functions
Select PICTURE MODE (
\ page 5)
RETURN PLUS function
Return to the frequently viewed channel.
Choose the channel you want to programme
RETURN PLUS
PROGRAMMED!
Press and hold
To cancel
RETURN PLUS
CANCELED!
Press and hold
RETURN function
If you have not set or have canceled the RETURN PLUS channel, this will return to the previously viewed channel.
Display the programme number or video terminal number.
Turn the TV on from standby and vice versa
Set OFF TIMER (
\ page 7)
Select ECO MODE (
\ page 5)
Select programme number
For two digits programme number
Select TV or video input
Operating the menus (
\ page 5)
Turn the volume Off / On
Adjust the volume level, Turn off Muting
Select Channel
Select the desired channel number.
For Hyper Scan:
Press and hold
PR changes without changing the picture. Once you stop pressing CHANNEL+ or CHANNEL- button, picture will change to the desired PR.
TV buttons and functions
* This illustration shows AV-14UMG7.
Select Channel
Video and audio input jack
Headphone jack
Display the TV’s MENU,
Exit after fi nish setting
Adjust volume level
POWER /
ON TIMER
Remote control sensor
TV’s main power on/off
POWER lamp - Indicates the TV’s status.
No colour : TV’s main power is being turned off.
Red
Blink
: TV’s main power is being turned on.
: While the TV is in standby mode, ON
TIMER function is in used. While the
TV is in turn on mode, OFF TIMER function is in used.
Note: When you turn off the power switch while
TV is in standby mode, the power lamp will go off in 5 -10 seconds. When you operate the TV,
POWER Lamp will blink.
Using the TV’s MENU
Operating the menus
Display MENU
(1 / 3) MENU
PICTURE MODE
PICTURE SETTING
WHITE BALANCE
ECO MODE
ON TIMER
OFF TIMER
NORMAL
Showing MENU page 1 of 3
/ Select function, go to previous/next page
On-screen guide
/ Display function setting.
/ Change setting
To return to previous screen
To exit from Menu or
MENU
PICTURE MODE
PICTURE SETTING
PICTURE SETTING can operate when PICTURE
MODE is set to USER
(
\ PICTURE MODE)
On screen scale colour
Center position : Yellow
Others position : Green
WHITE BALANCE
ECO MODE
Adjust picture contrast according to room
Item
USER
Description
(Setting / Adjustment)
Change picture settings
(
\ PICTURE SETTING)
Heightens contrast and sharpness VIVID
SOFT Softens contrast and sharpness
CONTRAST Adjust contrast (Lower j Higher)
BRIGHT Adjust brightness
(Darker j Brighter)
SHARP
COLOUR
TINT
RESET
Adjust sharpness
(Softer j Higher)
Adjust colour (Lighter j Deeper)
Adjust colour tint
(Reddish j Greenish)
Reset all items level to center
NORMAL Normal white balance
COOL
WARM
OFF
ECO-1
ECO-2
Bluish white
Reddish white
Cancel the function
Mild contrast (recommended)
Even contrast
ON TIMER
OFF TIMER
AI VOLUME
CHILD LOCK
BLUE BACK
VNR
To reduces the picture noise
GAME
LANGUAGE
AUTO PROGRAM
MANUAL PROGRAM
INSERT / DELETE
COLOUR SYSTEM
SOUND SYSTEM
Turns on the TV from standby mode (
\ page 7)
Turns off the TV to standby mode (
\ page 7)
ON Sets the volume level for all channels and video inputs automatically depends on the strength of signal from the source.
OFF Volume can be adjusted individually for each channel
ON
OFF
ON
Disable the front buttons of the TV
Cancel the function
Displays a blue screen and mutes the sound when signal from the aerial is weak or absent
OFF
AUTO
MIN
MAX
OFF
Cancel the function
Effect of VNR is automatically controlled
Effect of VNR becomes minimum
Effect of VNR becomes maximum
Cancel the function
Select a game to play (PUZZLE / TWINS)
(
\ page 7)
Choose your desired on screen display language.
Automatically registers channels (
\ page 6)
Manually search channels and fine-tunes channels (
\ page 6)
Add, delete and move registered channels
(
\ page 6)
Select the appropriate system
In TV mode :
(AV-14A17 / AV-14U17 / AV-21B17 / AV-21Q17 /
AV-21Y17 : AUTO / PAL / SECAM)
(Other models : AUTO / PAL / SECAM /
NTSC3.58 / NTSC4.43)
In VIDEO mode (All models) :
(AUTO / PAL / SECAM / NTSC3.58 / NTSC4.43)
(
\ page 7)
Select the appropriate system
(AV-14A17 / AV-14U17 / AV-21B17 / AV-21Q17 /
AV-21Y17 :BG / I / DK) (Other models : BG / I /
DK / M) (
\ page 7)
5
1
2
Presetting TV channels
AUTO PROGRAM
MENU AUTO PROGRAM or
AUTO PROGRAM
VH
OK : MANUAL PROGRAM
3
to stop or when AUTO PROGRAM fi nishes.
4
MANUAL PROGRAM screen appears (
\ MANUAL PROGRAM).
MANUAL PROGRAM
1
2
MENU MANUAL PROGRAM or
MANUAL PROGRAM
CH / CC
05 B/G
CH
07 B/G
10
09 B/G
VOLUME-/+ : SEARCH-/+
/ : FINE-/+
DISPLAY : SOUND SYSTEM
3
4
To search for a channel manually
(SEARCH)
To fi ne-tune a channel
(FINE)
1. Select the PR number you wish to store the channel.
2. Press the VOLUME +/- button to start searching from the present channel. Searching stops when the following channel is found.
1. Select the channel you wish to fi ne-tune.
2. Press the or button until a clear picture is obtained.
If noisy sound is heard and unsuitable sound system for your broadcasting (
\ Page 7)
1. Press DISPLAY button then on screen will change to Sound System,
2. Choose an appropriate sound system.
to exit.
1
2
INSERT / DELETE
After this operation, other channel's PR number will be changed.
MENU INSERT / DELETE or
INSERT / DELETE
CH / CC
05 B/G
05
07 B/G
CH
09 B/G
VOLUME+ : INSERT
MOVE
MUTING : DELETE
3
To add the new channel (INSERT)
1. Select the PR number you wish to store the new channel.
2. Press the VOLUME+ button.
3. Press button to choose “CH” or “CC”.
4. Enter the CH/CC number for the channel you wish to add. The TV starts to search for the channel.
Certain channels are not available in some countries.
If you cannot receive a channel by INSERT, use
MANUAL PROGRAM.
To delete a channel (DELETE)
To change the PR number (MOVE)
Select the channel you wish to delete and press .
1. Select the PR number you wish to move.
2. Press the button.
3. Press or button to move it to the new PR number.
4. Press button.
4
to exit.
Channel table
CH/CC
CH02
CH03
CH04
CH05
CH06
CH07
CH08
CH09
CH10
CH11
CH12
CCIR
E2
E3
E4
E5
E6
E7
E8
E9
E10
E11
E12
OIRT
R1
R2
R6
R7
R8
R9
R10
R11
R12
CH/CC
CH21
CH22
CH69
CCIR
E21
E22
E69
CCIR: Middle East, Southeast Asia, etc..
OIRT CH/CC
CC01
CC02
CCIR
S-1
S-2
CC41
CC75
CC76
CC77
CC78
CC79
OIRT: Russia etc..
S-41
X
Y
Z
Z+1
Z+2
OIRT
R3
R4
R5
1
2
Using the timer
ON TIMER
3
4
5
MENU or
ON TIMER
ON TIMER
Choose the PR (channel) that you want to watch when the TV turns on. External input, AV position and any un-preset channel cannot be chosen for PR.
Set the ON TIMER to your desired period of time. When the ON TIMER is set to other than 00:00, the ON TIMER is activated. You can set the period of time to a maximum of 12 hours in 15-minute intervals.
To off the ON TIMER, set the time to 00:00.
Playing game
1
MENU GAME
2
Select a game.
PUZZLE
TWINS
This game needs you to rearrange the numbers 1 to 15 in order by swapping the blank card with the numbered card.
This game needs you to fi nd all the matching pairs of cards. If you open a correct pair, the card will stay uncovered. If you miss, they will fl ip back.
Instructions to play
Left
Up
Down
To move
Right
OR
Down Up Left
To move
Right
To open a card (TWINS only) To restart the game To exit the game
OFF TIMER
1
2
3
4
MENU OFF TIMER
Note You can select OFF TIMER function by direct key.
You can set the period of time to a maximum of 120 minutes in 10 minutes intervals.
When the remaining elapse time is one minute, “GOOD NIGHT!” appears on the screen.
You can display the OFF TIMER screen again to confi rm or change the remaining time.
5
To off the OFF TIMER, select OFF or turn off the TV’s main power.
Downloaded From TV-Manual.com Manuals
Sound and Colour system in your country or region
Area Country or Region
Sound
System
Asia,
Middle
East
Bahrain, Kuwait, Oman, Qatar, United Arab
Emirates, Yemen, etc.
Indonesia, Malaysia, Singapore, Thailand, India, etc
China, Vietnam, etc.
B/G
Hong Kong, etc.
D/K
I
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
B/G
Philippines, Taiwan, Myanmar, etc.
M
Russia, etc.
Czech Republic, Poland, etc.
D/K
Europe
Germany, Holland, Belgium, etc.
UK, etc.
Oceania
Australia, New Zealand, etc.
Republic of South Africa, etc.
B/G
B/G
I
I
Africa
Nigeria, etc.
Egypt, Morocco, etc.
B/G
Colour
System
PAL
SECAM
NTSC
SECAM
PAL
PAL
PAL
SECAM
7
Troubleshooting
If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.
Problem
No or poor picture
Snowy picture
Stripes or coloured patches appeared
Double-picture
(ghosting)
No or poor sound
White and bright still image looks as if it is coloured
Image from video input is distorted
Cannot operate the remote control
Cannot operate the
MENU
Cannot operate the front panel buttons
Image takes a while to be displayed
TV emits crackling sound
Static shock when touch the TV screen
The TV turns off suddenly
Cause / Solution
• Turn OFF BLUE BACK if it is ON. (
\ page 5)
• Adjust the COLOUR or BRIGHT setting. Refer to
“PICTURE SETTING”. (
\ page 5)
• Choose the appropriate colour system. (
\ page 5)
• Check the aerial and TV connections. (
\ page 3)
• Interference caused by electrical appliances or speakers. Move them away from the TV.
• Interference caused by signal reflecting from mountains or buildings. Adjust the aerial’s direction or use another antenna.
• Choose the appropriate sound system. (
\ page 5)
• Inevitable phenomenon due to the nature of the picture tube. This is not a malfunction.
• The image was not properly recorded. This is not a malfunction.
• Replace the batteries. (
\ page 2)
• Operate it at less than 7 meters from the TV.
• Exit and enter the MENU again.
• Turn OFF CHILD LOCK if it is ON.
• Image requires time to stabilize before display.
This is not a malfunction.
• Caused by a sudden change in temperature and it is not a malfunction. Call a service technician for inspection.
• Caused by static electricity of the picture tube and it will not harm the human body. This is not a malfunction.
• This is not a malfunction. If you had set the BLUE
BACK function to ON, TV will be turned off automatically when no signals are received from an antenna for about
15 minutes or longer.
Specifi cations
TV RF systems AV-14A17 / AV-14U17 / AV-21B17 / AV-21Q17 / AV-21Y17 :
B, G, I, D, K
Others models : B, G, I, D, K, M
Colour systems AV-14A17 / AV-14U17 / AV-21B17 / AV-21Q17 / AV-21Y17 :
PAL, SECAM, NTSC 3.58 MHz / NTSC 4.43 MHz
(in VIDEO mode only)
Others models : PAL, SECAM, NTSC 3.58 MHz /
NTSC 4.43 MHz
Receiving channels
VHF low channel (VL), VHF high channel (VH), UHF channel (U)
Receives cable channels in mid band, super band and hyper band.
Power requirements
For Malaysia /
Australia
AC 160 to 240 V, 50 Hz / 60 Hz
For others AC 110 to 240 V, 50 Hz / 60 Hz
External input / output
INPUT
OUTPUT
VIDEO input, AUDIO input
VIDEO output, AUDIO output
Headphone jack Stereo mini jack (3.5 mm diameter)
Design and specifi cations are subject to change without notice.
© 2007 Victor Company of Japan, Limited
Downloaded From TV-Manual.com Manuals
0307SCT-NF-MT
COLOUR TELEVISION
INSTRUCTIONS
Contents
Safety precautions ......................... 2
Connections .................................. 3
Initial settings ................................. 3
AV-2100BE
AV-2100QE
AV-2100YE
AV-1400AE
AV-1410AE
AV-1400UE
AV-1410UE
Remote control buttons and functions ................................. 4
TV buttons and functions ............... 4
Using the TV’s MENU .................... 5
Presetting TV channels ................. 6
Using the timer .............................. 7
Playing game ................................. 7
Sound and Colour system in your country or region ........................... 7
Troubleshooting ............. Back cover
Specifi cations ................ Back cover
This illustration shows AV-1400UE.
The illustrations of AV-1400UE is used in this instruction manual for explanation purpose. Your TV may not look exactly the same as illustrated.
Downloaded From TV-Manual.com Manuals
GGT0144-001B-H
Thank you for buying this JVC colour television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
• The apparatus shall not be exposed to dripping or splashing and that no objects fi lled with liquids, such as vases, shall be placed on the apparatus.
• Do not allow objects or liquid into the cabinet openings.
CAUTION
TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING
RULES REGARDING THE USE OF THIS TV.
• Never block or cover the ventilation openings.
• Never install the TV where good ventilation is unattainable.
• When installing this TV, leave spaces for ventilation around the TV of more than the minimum distances as shown.
• Operate only from the power source indicated on the rear of the TV.
• Avoid damaging the power cord and mains plug. When unplugging the TV, grasp the mains plug. Do not pull on the power cord.
• This TV can be turned on/off power by connecting/disconnecting the AC plug into
AC outlet. While this TV is being installed, enough space should be reserved for connection/disconnecting the AC plug into
AC outlet by hand.
In the event of a fault, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover.
POWER /
ON TIMER
• The surface of the TV screen is easily damaged.
Be very careful with it when handling the TV.
Should the TV screen become soiled, wipe it with a soft dry cloth.
Never rub it forcefully. Never use any cleaner or detergent on it.
• Insert two batteries by following the and polarities and inserting
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work properly, fi t new batteries.
The supplied batteries are for testing, not regular use.
Connections
CAUTION
Ensure to turn off all equipments including the TV before connecting the
AC mains plug to the AC outlet.
Connecting to the aerial cable and VCR
* This illustration
shows AV-1400UE.
TV rear terminals
VHF/UHF outdoor aerial
75-ohm coaxial cable (not supplied)
1
Initial settings
Turn on the TV.
2
JVC logo appears.
Select a language.
LANGUAGE
УKPAЇHCЬKA
OK : AUTO PROGRAM
DISPLAY : BACK
MENU
: EXIT
Select
OR
VCR (for recording)
Connecting to the TV front terminals
* This illustration shows AV-1400UE.
VCR or wait 15 seconds to run Setup Tour
Searching for the channels.
AUTO PROGRAM
VH
OK : MANUAL PROGRAM to stop or wait until AUTO
PROGRAM fi nishes
3
Proceed to AUTO PROGRAM
Search a channel manually or fi ne-tune a channel.
MANUAL PROGRAM
CH/CC
06 D/K
12
08 D/K
10 D/K search and fi ne-tune
VOLUME-/+ : SEARCH-/+
(FINE),
\ page 6.
/ : FINE-/+
To perform manual
or
To complete
Setup Tour
To restart Setup Tour after above setup has completed
(while the cursor is pointing to PICTURE
MODE and within 3 seconds)
Headphones TV front terminals Camcorder
After all the connections have been made, insert the mains plug to the AC outlet.
Downloaded From TV-Manual.com Manuals
TV game
If you press when LANGUAGE is displayed (Step 2), the screen will exit to MENU.
3
Remote control buttons and functions
Select PICTURE MODE (
\ page 5)
RETURN PLUS function
Return to the frequently viewed channel.
Choose the channel you want to programme
RETURN PLUS
PROGRAMMED!
Press and hold
To cancel
RETURN PLUS
CANCELED!
Press and hold
RETURN function
If you have not set or have canceled the RETURN PLUS channel, this will return to the previously viewed channel.
Display the programme number or video terminal number.
Turn the TV on from standby and vice versa
Set OFF TIMER (
\ page 7)
Select ECO MODE (
\ page 5)
Select programme number
For two digits programme number
Select TV or video input
Operating the menus (
\ page 5)
Turn the volume Off / On
Adjust the volume level, Turn off Muting
Select Channel
Select the desired channel number.
For Hyper Scan:
Press and hold
PR changes without changing the picture. Once you stop pressing CHANNEL+ or CHANNEL- button, picture will change to the desired PR.
TV buttons and functions
* This illustration shows AV-1400UE.
Select Channel
Video and audio input jack
Headphone jack
Display the TV’s MENU,
Exit after fi nish setting
Adjust volume level
POWER /
ON TIMER
Remote control sensor
TV’s main power on/off
POWER lamp - Indicates the TV’s status.
No colour : TV’s main power is being turned off.
Red
Blink
: TV’s main power is being turned on.
: While the TV is in standby mode, ON
TIMER function is in used. While the
TV is in turn on mode, OFF TIMER function is in used.
Note: When you turn off the power switch while
TV is in standby mode, the power lamp will go off in 5 -10 seconds. When you operate the TV,
POWER Lamp will blink.
Using the TV’s MENU
Operating the menus
Display MENU
(1 / 3) MENU
PICTURE MODE
PICTURE SETTING
WHITE BALANCE
ECO MODE
ON TIMER
OFF TIMER
NORMAL
Showing MENU page 1 of 3
/ Select function, go to previous/next page
On-screen guide
/ Display function setting.
/ Change setting
To return to previous screen
To exit from Menu or
MENU
PICTURE MODE
PICTURE SETTING
PICTURE SETTING can operate when PICTURE
MODE is set to USER
(
\ PICTURE MODE)
On screen scale colour
Center position : Yellow
Others position : Green
WHITE BALANCE
Item
USER
Description
(Setting / Adjustment)
Change picture settings
(
\ PICTURE SETTING)
Heightens contrast and sharpness VIVID
SOFT Softens contrast and sharpness
CONTRAST Adjust contrast (Lower j Higher)
BRIGHT
SHARP
COLOUR
TINT
RESET
Adjust brightness
(Darker j Brighter)
Adjust sharpness
(Softer j Higher)
Adjust colour (Lighter j Deeper)
Adjust colour tint
(Reddish j Greenish)
Reset all items level to center
NORMAL
COOL
WARM
Normal white balance
Bluish white
Reddish white
Downloaded From TV-Manual.com Manuals
ECO MODE
Adjust picture contrast according to room brightness
ON TIMER
OFF TIMER
AI VOLUME
CHILD LOCK
BLUE BACK
VNR
To reduces the picture noise
GAME
LANGUAGE
AUTO PROGRAM
MANUAL PROGRAM
INSERT / DELETE
COLOUR SYSTEM
SOUND SYSTEM
OFF
ECO-1
ECO-2
Cancel the function
Mild contrast (recommended)
Even contrast
Turns on the TV from standby mode (
\ page 7)
Turns off the TV to standby mode (
\ page 7)
ON Sets the volume level for all channels and video inputs automatically depends on the strength of signal from the source.
OFF Volume can be adjusted individually for each channel
ON
OFF
ON
Disable the front buttons of the TV
Cancel the function
Displays a blue screen and mutes the sound when signal from the aerial is weak or absent
OFF
AUTO
MIN
MAX
Cancel the function
Effect of VNR is automatically controlled
Effect of VNR becomes minimum
Effect of VNR becomes maximum
OFF Cancel the function
Select a game to play (PUZZLE / TWINS)
(
\ page 7)
Choose your desired on screen display language.
Automatically registers channels (
\ page 6)
Manually search channels and fine-tunes channels (
\ page 6)
Add, delete and move registered channels
(
\ page 6)
Select the appropriate system
(In TV mode: AUTO / PAL / SECAM)
(In VIDEO mode: AUTO / PAL / SECAM /
NTSC 3.58 / NTSC 4.43) (
\ page 7)
Select the appropriate system (BG / I / DK)
(
\ page 7)
5
1
2
Presetting TV channels
AUTO PROGRAM
MENU AUTO PROGRAM or
AUTO PROGRAM
VH
OK : MANUAL PROGRAM
3
to stop or when AUTO PROGRAM fi nishes.
4
MANUAL PROGRAM screen appears (
\ MANUAL PROGRAM).
MANUAL PROGRAM
1
2
MENU MANUAL PROGRAM or
MANUAL PROGRAM
CH/CC
01 D/K
CH
03 D/K
50
05 D/K
VOLUME-/+ : SEARCH-/+
/ : FINE-/+
3
4
To search for a channel manually
(SEARCH)
To fi ne-tune a channel
(FINE)
1. Select the PR number you wish to store the channel.
2. Press the VOLUME +/- button to start searching from the present channel. Searching stops when the following channel is found.
1. Select the channel you wish to fi ne-tune.
2. Press the or button until a clear picture is obtained.
If noisy sound is heard and unsuitable sound system for your broadcasting (
\ Page 7)
1. Press DISPLAY button then on screen will change to Sound System,
2. Choose an appropriate sound system.
to exit.
1
2
INSERT / DELETE
After this operation, other channel's PR number will be changed.
MENU INSERT / DELETE or
INSERT / DELETE
PR
01
02
03
04
05
CH/CC
D/K CC 20
D/K CH 30
D/K CH 40
D/K CH 50
D/K CH 60
VOLUME+ : INSERT
MOVE
MUTING : DELETE
3
To add the new channel (INSERT)
1. Select the PR number you wish to store the new channel.
2. Press the VOLUME+ button.
3. Press button to choose “CH” or “CC”.
4. Enter the CH/CC number for the channel you wish to add. The TV starts to search for the channel.
Certain channels are not available in some countries.
If you cannot receive a channel by INSERT, use
MANUAL PROGRAM.
To delete a channel (DELETE)
To change the PR number (MOVE)
Select the channel you wish to delete and press .
1. Select the PR number you wish to move.
2. Press the button.
3. Press or button to move it to the new PR number.
4. Press button.
4
to exit.
Channel table
CH/CC
CH02
CH03
CH04
CH05
CH06
CH07
CH08
CH09
CH10
CH11
CH12
CCIR
E2
E3
E4
E5
E6
E7
E8
E9
E10
E11
E12
OIRT
R1
R2
R6
R7
R8
R9
R10
R11
R12
CH/CC
CH21
CH22
CH69
CCIR
E21
E22
E69
CCIR: Middle East, Southeast Asia, etc..
OIRT CH/CC
CC01
CC02
CCIR
S-1
S-2
CC41
CC75
CC76
CC77
CC78
CC79
OIRT: Russia etc..
S-41
X
Y
Z
Z+1
Z+2
OIRT
R3
R4
R5
1
2
Using the timer
ON TIMER
3
4
MENU or
ON TIMER
ON TIMER
Choose the PR (channel) that you want to watch when the TV turns on. External input, AV position and any un-preset channel cannot be chosen for PR.
Set the ON TIMER to your desired period of time. When the ON TIMER is set to other than 00:00, the ON TIMER is activated. You can set the period of time to a maximum of 12 hours in 15-minute intervals.
Playing game
1
MENU GAME
2
Select a game.
PUZZLE
This game needs you to rearrange the numbers 1 to 15 in order by swapping the blank card with the numbered card.
TWINS
This game needs you to fi nd all the matching pairs of cards. If you open a correct pair, the card will stay uncovered. If you miss, they will fl ip back.
Instructions to play
Left
Up
OR
Down
To move
Right
Down Up Left
To move
Right
5
To off the ON TIMER, set the time to 00:00.
To open a card
(TWINS only)
To restart the game To exit the game
OFF TIMER
1
2
3
4
MENU OFF TIMER
Note You can select OFF TIMER function by direct key.
You can set the period of time to a maximum of 120 minutes in 10 minutes intervals.
When the remaining elapse time is one minute, “GOOD NIGHT!” appears on the screen.
You can display the OFF TIMER screen again to confi rm or change the remaining time.
5
To off the OFF TIMER, select OFF or turn off the TV’s main power.
Downloaded From TV-Manual.com Manuals
Sound and Colour system in your country or region
Area Country or Region
Sound
System
Asia,
Middle
East
Bahrain, Kuwait, Oman, Qatar, United Arab
Emirates, Yemen, etc.
Indonesia, Malaysia, Singapore, Thailand, India, etc
China, Vietnam, etc.
B/G
Hong Kong, etc.
D/K
I
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
B/G
Philippines, Taiwan, Myanmar, etc.
M
Russia, etc.
Czech Republic, Poland, etc.
D/K
Europe
Germany, Holland, Belgium, etc.
UK, etc.
Oceania
Australia, New Zealand, etc.
Republic of South Africa, etc.
B/G
B/G
I
I
Africa
Nigeria, etc.
Egypt, Morocco, etc.
B/G
Colour
System
PAL
SECAM
NTSC
SECAM
PAL
PAL
PAL
SECAM
7
Troubleshooting
If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.
Problem
No or poor picture
Snowy picture
Stripes or coloured patches appeared
Double-picture
(ghosting)
No or poor sound
White and bright still image looks as if it is coloured
Image from video input is distorted
Cannot operate the remote control
Cannot operate the
MENU
Cannot operate the front panel buttons
Image takes a while to be displayed
TV emits crackling sound
Static shock when touch the TV screen
The TV turns off suddenly
Cause / Solution
• Turn OFF BLUE BACK if it is ON. (
\ page 5)
• Adjust the COLOUR or BRIGHT setting. Refer to
“PICTURE SETTING”. (
\ page 5)
• Choose the appropriate colour system. (
\ page 5)
• Check the aerial and TV connections. (
\ page 3)
• Interference caused by electrical appliances or speakers. Move them away from the TV.
• Interference caused by signal reflecting from mountains or buildings. Adjust the aerial’s direction or use another antenna.
• Choose the appropriate sound system. (
\ page 5)
• Inevitable phenomenon due to the nature of the picture tube. This is not a malfunction.
• The image was not properly recorded. This is not a malfunction.
• Replace the batteries. (
\ page 2)
• Operate it at less than 7 meters from the TV.
• Exit and enter the MENU again.
• Turn OFF CHILD LOCK if it is ON.
• Image requires time to stabilize before display.
This is not a malfunction.
• Caused by a sudden change in temperature and it is not a malfunction. Call a service technician for inspection.
• Caused by static electricity of the picture tube and it will not harm the human body. This is not a malfunction.
• This is not a malfunction. If you had set the BLUE
BACK function to ON, TV will be turned off automatically when no signals are received from an antenna for about
15 minutes or longer.
Specifi cations
TV RF systems B, G, I, D, K
Colour systems PAL, SECAM, NTSC 3.58 MHz / NTSC 4.43 MHz
(in VIDEO mode only)
Receiving channels
VHF low channel (VL), VHF high channel (VH), UHF channel (U)
Receives cable channels in mid band, super band and hyper band.
Power requirements
AC 160 to 240 V, 50 Hz / 60 Hz
External input / output
INPUT
OUTPUT
VIDEO input, AUDIO input
VIDEO output, AUDIO output
Headphone jack Stereo mini jack (3.5 mm diameter)
Design and specifi cations are subject to change without notice.
© 2007 Victor Company of Japan, Limited
Downloaded From TV-Manual.com Manuals
0307SCT-NF-MT
COLOUR TELEVISION
INSTRUCTIONS
AV-14A17
Contents
Safety precautions ......................... 2
Connections .................................. 3
Initial settings ................................. 3
Remote control buttons and functions ................................. 4
TV buttons and functions ............... 4
Using the TV’s MENU .................... 5
Presetting TV channels ................. 6
Using the timer .............................. 7
Playing game ................................. 7
Sound and Colour system in your country or region ........................... 7
Troubleshooting ............. Back cover
Specifi cations ................ Back cover
GGT0149-001A-H
Downloaded From TV-Manual.com Manuals
Thank you for buying this JVC colour television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
• The apparatus shall not be exposed to dripping or splashing and that no objects fi lled with liquids, such as vases, shall be placed on the apparatus.
• Do not allow objects or liquid into the cabinet openings.
CAUTION
TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING
RULES REGARDING THE USE OF THIS TV.
• Never block or cover the ventilation openings.
• Never install the TV where good ventilation is unattainable.
• When installing this TV, leave spaces for ventilation around the TV of more than the minimum distances as shown.
• Operate only from the power source indicated on the rear of the TV.
• Avoid damaging the power cord and mains plug. When unplugging the TV, grasp the mains plug. Do not pull on the power cord.
• This TV can be turned on/off power by connecting/disconnecting the AC plug into
AC outlet. While this TV is being installed, enough space should be reserved for connection/disconnecting the AC plug into
AC outlet by hand.
In the event of a fault, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover.
• The surface of the TV screen is easily damaged.
Be very careful with it when handling the TV.
Should the TV screen become soiled, wipe it with a soft dry cloth.
Never rub it forcefully. Never use any cleaner or detergent on it.
• Insert two batteries by following the and polarities and inserting
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work properly, fi t new batteries.
The supplied batteries are for testing, not regular use.
Connections
CAUTION
Ensure to turn off all equipments including the TV before connecting the
AC mains plug to the AC outlet.
Connecting to the aerial cable and VCR
TV rear terminals
VHF/UHF outdoor aerial
1
Initial settings
Turn on the TV.
2
JVC logo appears.
Select a language.
LANGUAGE
: AUTO PROGRAM
DISPLAY
: BACK
MENU : EXIT
75-ohm coaxial cable (not supplied)
Select
OR
VCR (for recording)
Connecting to the TV front terminals
VCR or wait 15 seconds to run Setup Tour
Searching for the channels.
AUTO PROGRAM
VH
OK : MANUAL PROGRAM to stop or wait until AUTO
PROGRAM fi nishes
3
Proceed to AUTO PROGRAM
Search a channel manually or fi ne-tune a channel.
MANUAL PROGRAM
CH/CC
06 I
12
08 I
10 I search and fi ne-tune
VOLUME-/+ : SEARCH-/+
(FINE),
\ page 6.
/ : FINE-/+
To perform manual
or
To complete
Setup Tour
To restart Setup Tour after above setup has completed
(while the cursor is pointing to PICTURE
MODE and within 3 seconds)
Headphones TV front terminals Camcorder
After all the connections have been made, insert the mains plug to the AC outlet.
Downloaded From TV-Manual.com Manuals
TV game
If you press when LANGUAGE is displayed (Step 2), the screen will exit to MENU.
3
Remote control buttons and functions
Select PICTURE MODE (
\ page 5)
RETURN PLUS function
Return to the frequently viewed channel.
Choose the channel you want to programme
RETURN PLUS
PROGRAMMED!
Press and hold
To cancel
RETURN PLUS
CANCELED!
Press and hold
RETURN function
If you have not set or have canceled the RETURN PLUS channel, this will return to the previously viewed channel.
Display the programme number or video terminal number.
Turn the TV on from standby and vice versa
Set OFF TIMER (
\ page 7)
Select ECO MODE (
\ page 5)
Select programme number
For two digits programme number
Select TV or video input
Operating the menus (
\ page 5)
Turn the volume Off / On
Adjust the volume level, Turn off Muting
Select Channel
Select the desired channel number.
For Hyper Scan:
Press and hold
PR changes without changing the picture. Once you stop pressing CHANNEL+ or CHANNEL- button, picture will change to the desired PR.
TV buttons and functions
Select Channel
Video and audio input jack
Headphone jack
Display the TV’s MENU,
Exit after fi nish setting
Adjust volume level
Remote control sensor
TV’s main power on/off
POWER lamp - Indicates the TV’s status.
No colour : TV’s main power is being turned off.
Red
Blink
: TV’s main power is being turned on.
: While the TV is in standby mode, ON
TIMER function is in used. While the
TV is in turn on mode, OFF TIMER function is in used.
Note: When you turn off the power switch while
TV is in standby mode, the power lamp will go off in 5 -10 seconds. When you operate the TV,
POWER Lamp will blink.
Using the TV’s MENU
Operating the menus
Display MENU
(1 / 3) MENU
PICTURE MODE
PICTURE SETTING
WHITE BALANCE
ECO MODE
ON TIMER
OFF TIMER
NORMAL
Showing MENU page 1 of 3
/ Select function, go to previous/next page
On-screen guide
/ Display function setting.
/ Change setting
To return to previous screen
To exit from Menu or
MENU
PICTURE MODE
PICTURE SETTING
PICTURE SETTING can operate when PICTURE
MODE is set to USER
(
\ PICTURE MODE)
On screen scale colour
Center position : Yellow
Others position : Green
WHITE BALANCE
Item
USER
Description
(Setting / Adjustment)
Change picture settings
(
\ PICTURE SETTING)
Heightens contrast and sharpness VIVID
SOFT Softens contrast and sharpness
CONTRAST Adjust contrast (Lower j Higher)
BRIGHT
SHARP
COLOUR
TINT
RESET
Adjust brightness
(Darker j Brighter)
Adjust sharpness
(Softer j Higher)
Adjust colour (Lighter j Deeper)
Adjust colour tint
(Reddish j Greenish)
Reset all items level to center
NORMAL
COOL
WARM
Normal white balance
Bluish white
Reddish white
Downloaded From TV-Manual.com Manuals
ECO MODE
Adjust picture contrast according to room brightness
ON TIMER
OFF TIMER
AI VOLUME
CHILD LOCK
BLUE BACK
VNR
To reduces the picture noise
GAME
LANGUAGE
AUTO PROGRAM
MANUAL PROGRAM
INSERT / DELETE
COLOUR SYSTEM
SOUND SYSTEM
OFF
ECO-1
ECO-2
Cancel the function
Mild contrast (recommended)
Even contrast
Turns on the TV from standby mode (
\ page 7)
Turns off the TV to standby mode (
\ page 7)
ON Sets the volume level for all channels and video inputs automatically depends on the strength of signal from the source.
OFF Volume can be adjusted individually for each channel
ON
OFF
ON
Disable the front buttons of the TV
Cancel the function
Displays a blue screen and mutes the sound when signal from the aerial is weak or absent
OFF
AUTO
MIN
MAX
Cancel the function
Effect of VNR is automatically controlled
Effect of VNR becomes minimum
Effect of VNR becomes maximum
OFF Cancel the function
Select a game to play (PUZZLE / TWINS)
(
\ page 7)
Choose your desired on screen display language.
Automatically registers channels (
\ page 6)
Manually search channels and fine-tunes channels (
\ page 6)
Add, delete and move registered channels
(
\ page 6)
Select the appropriate system
(In TV mode: AUTO / PAL / SECAM)
(In VIDEO mode: AUTO / PAL / SECAM /
NTSC 3.58 / NTSC 4.43) (
\ page 7)
Select the appropriate system (BG / I / DK)
(
\ page 7)
5
1
2
Presetting TV channels
AUTO PROGRAM
MENU AUTO PROGRAM or
AUTO PROGRAM
VH
OK : MANUAL PROGRAM
3
to stop or when AUTO PROGRAM fi nishes.
4
MANUAL PROGRAM screen appears (
\ MANUAL PROGRAM).
MANUAL PROGRAM
1
2
MENU MANUAL PROGRAM or
MANUAL PROGRAM
CH/CC
01 I
CH
03 I
50
05 I
VOLUME-/+ : SEARCH-/+
/ : FINE-/+
3
4
To search for a channel manually
(SEARCH)
To fi ne-tune a channel
(FINE)
1. Select the PR number you wish to store the channel.
2. Press the VOLUME +/- button to start searching from the present channel. Searching stops when the following channel is found.
1. Select the channel you wish to fi ne-tune.
2. Press the or button until a clear picture is obtained.
If noisy sound is heard and unsuitable sound system for your broadcasting (
\ Page 7)
1. Press DISPLAY button then on screen will change to Sound System,
2. Choose an appropriate sound system.
to exit.
1
2
INSERT / DELETE
After this operation, other channel's PR number will be changed.
MENU INSERT / DELETE or
INSERT / DELETE
CH/CC
01 I
30
40
50
05 I
VOLUME+ : INSERT
MOVE
MUTING : DELETE
3
To add the new channel (INSERT)
1. Select the PR number you wish to store the new channel.
2. Press the VOLUME+ button.
3. Press button to choose “CH” or “CC”.
4. Enter the CH/CC number for the channel you wish to add. The TV starts to search for the channel.
Certain channels are not available in some countries.
If you cannot receive a channel by INSERT, use
MANUAL PROGRAM.
To delete a channel (DELETE)
To change the PR number (MOVE)
Select the channel you wish to delete and press .
1. Select the PR number you wish to move.
2. Press the button.
3. Press or button to move it to the new PR number.
4. Press button.
4
to exit.
Channel table
CH/CC
CH02
CH03
CH04
CH05
CH06
CH07
CH08
CH09
CH10
CH11
CH12
CCIR
E2
E3
E4
E5
E6
E7
E8
E9
E10
E11
E12
OIRT
R1
R2
R6
R7
R8
R9
R10
R11
R12
CH/CC
CH21
CH22
CH69
CCIR
E21
E22
E69
CCIR: Middle East, Southeast Asia, etc..
OIRT CH/CC
CC01
CC02
CCIR
S-1
S-2
CC41
CC75
CC76
CC77
CC78
CC79
OIRT: Russia etc..
S-41
X
Y
Z
Z+1
Z+2
OIRT
R3
R4
R5
1
2
Using the timer
ON TIMER
3
4
MENU or
ON TIMER
ON TIMER
Choose the PR (channel) that you want to watch when the TV turns on. External input, AV position and any un-preset channel cannot be chosen for PR.
Set the ON TIMER to your desired period of time. When the ON TIMER is set to other than 00:00, the ON TIMER is activated. You can set the period of time to a maximum of 12 hours in 15-minute intervals.
Playing game
1
MENU GAME
2
Select a game.
PUZZLE
This game needs you to rearrange the numbers 1 to 15 in order by swapping the blank card with the numbered card.
TWINS
This game needs you to fi nd all the matching pairs of cards. If you open a correct pair, the card will stay uncovered. If you miss, they will fl ip back.
Instructions to play
Left
Up
OR
Down
To move
Right
Down Up Left
To move
Right
5
To off the ON TIMER, set the time to 00:00.
To open a card
(TWINS only)
To restart the game To exit the game
OFF TIMER
1
2
3
4
MENU OFF TIMER
Note You can select OFF TIMER function by direct key.
You can set the period of time to a maximum of 120 minutes in 10 minutes intervals.
When the remaining elapse time is one minute, “GOOD NIGHT!” appears on the screen.
You can display the OFF TIMER screen again to confi rm or change the remaining time.
5
To off the OFF TIMER, select OFF or turn off the TV’s main power.
Downloaded From TV-Manual.com Manuals
Sound and Colour system in your country or region
Area Country or Region
Sound
System
Asia,
Middle
East
Bahrain, Kuwait, Oman, Qatar, United Arab
Emirates, Yemen, etc.
Indonesia, Malaysia, Singapore, Thailand, India, etc
China, Vietnam, etc.
B/G
Hong Kong, etc.
D/K
I
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
B/G
Philippines, Taiwan, Myanmar, etc.
M
Russia, etc.
Czech Republic, Poland, etc.
D/K
Europe
Germany, Holland, Belgium, etc.
UK, etc.
Oceania
Australia, New Zealand, etc.
Republic of South Africa, etc.
B/G
B/G
I
I
Africa
Nigeria, etc.
Egypt, Morocco, etc.
B/G
Colour
System
PAL
SECAM
NTSC
SECAM
PAL
PAL
PAL
SECAM
7
Troubleshooting
If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.
Problem
No or poor picture
Snowy picture
Stripes or coloured patches appeared
Double-picture
(ghosting)
Cause / Solution
• Turn OFF BLUE BACK if it is ON. (
\ page 5)
• Adjust the COLOUR or BRIGHT setting. Refer to
“PICTURE SETTING”. (
\ page 5)
• Choose the appropriate colour system. (
\ page 5)
• Check the aerial and TV connections. (
\ page 3)
• Interference caused by electrical appliances or speakers. Move them away from the TV.
• Interference caused by signal reflecting from mountains or buildings. Adjust the aerial’s direction or use another antenna.
• Choose the appropriate sound system. (
\ page 5)
• Inevitable phenomenon due to the nature of the picture tube. This is not a malfunction.
No or poor sound
White and bright still image looks as if it is coloured
Image from video input is distorted
Cannot operate the remote control
Cannot operate the
MENU
Cannot operate the front panel buttons
Image takes a while to be displayed
TV emits crackling sound
Static shock when touch the TV screen
The TV turns off suddenly
• The image was not properly recorded. This is not a malfunction.
• Replace the batteries. (
\ page 2)
• Operate it at less than 7 meters from the TV.
• Exit and enter the MENU again.
• Turn OFF CHILD LOCK if it is ON.
• Image requires time to stabilize before display.
This is not a malfunction.
• Caused by a sudden change in temperature and it is not a malfunction. Call a service technician for inspection.
• Caused by static electricity of the picture tube and it will not harm the human body. This is not a malfunction.
• This is not a malfunction. If you had set the BLUE BACK function to ON, TV will be turned off automatically when no signals are received from an antenna for about 15 minutes or longer.
Specifi cations
TV RF systems B, G, I, D, K
Colour systems PAL, SECAM, NTSC 3.58 MHz / NTSC 4.43 MHz
(in VIDEO mode only)
Receiving channels
VHF low channel (VL), VHF high channel (VH), UHF channel (U)
Receives cable channels in mid band, super band and hyper band.
Power requirements
AC 160 to 240 V, 50 Hz / 60 Hz
External input / output
INPUT
OUTPUT
VIDEO input, AUDIO input
VIDEO output, AUDIO output
Headphone jack Stereo mini jack (3.5 mm diameter)
Design and specifi cations are subject to change without notice.
© 2007 Victor Company of Japan, Limited
Downloaded From TV-Manual.com Manuals
0307SCT-NF-JMT
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 Safety precautions
- 3 Connections
- 3 Initial settings
- 4 and functions
- 4 TV buttons and functions
- 5 Using the TV’s MENU
- 6 Presetting TV channels
- 7 Using the timer
- 7 Playing game
- 7 country or region
- 10 Safety precautions
- 11 Connections
- 11 Initial settings
- 12 and functions
- 12 TV buttons and functions
- 13 Using the TV’s MENU
- 14 Presetting TV channels
- 15 Using the timer
- 15 Playing game
- 15 country or region
- 18 Safety precautions
- 19 Connections
- 19 Initial settings
- 20 and functions
- 20 TV buttons and functions
- 21 Using the TV’s MENU
- 22 Presetting TV channels
- 23 Using the timer
- 23 Playing game
- 23 country or region