advertisement
DIGITAL CAMERA
Reference Manual
En
Basic Shooting and Playback Operations 12
Recording and Playing Back Movies 69
Using the Wi-Fi (Wireless LAN) Function 117
Connecting the Camera to a TV, Printer, or Computer 121
Introduction
Read This First
To get the most from this Nikon product, be sure to read “For Your Safety”
(
vi–viii) and “Wi-Fi (Wireless LAN Network)” (
A xi), and all other instructions
thoroughly and keep them where they will be read by all who use the camera.
•
If you want to start using the camera right away, see “Preparing for
7) and “Basic Shooting and Playback Operations” (
Other Information
•
Symbols and Conventions
S ym bol
B
Description
This icon marks cautions and information that should be read before using the camera.
C
This icon marks notes and information that should be read before using the camera.
A
This icon marks other pages containing relevant information.
•
SD, SDHC, and SDXC memory cards are referred to as “memory cards” in this manual.
•
The setting at the time of purchase is referred to as the “default setting.”
•
The names of menu items displayed in the camera monitor, and the names of buttons or messages displayed on a computer monitor appear in bold.
•
In this manual, images are sometimes omitted from monitor display samples so that monitor indicators can be more clearly shown.
i
ii
How to Attach the Camera Strap
Information and Precautions
Life-Long Learning
As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education, continually updated information is available online at the following websites:
•
For users in the U.S.A.: http://www.nikonusa.com/
•
For users in Europe and Africa: http://www.europe-nikon.com/support/
•
For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/
Visit these websites to keep up-to-date with the latest product information, tips, answers to frequently asked questions (FAQs), and general advice on digital imaging and photography. Additional information may be available from the Nikon representative in your area. Visit the website below for contact information.
http://imaging.nikon.com/
Use Only Nikon Brand Electronic Accessories
Nikon COOLPIX cameras are designed to the highest standards and include complex electronic circuitry. Only Nikon brand electronic accessories (including battery chargers, batteries, Charging AC Adapters, AC adapters and, USB cables) certified by
Nikon specifically for use with this Nikon digital camera are engineered and proven to operate within the operational and safety requirements of this electronic circuitry.
T
HE USE OF NON-
N
IKON ELECTRONIC ACCESSORIES COULD DAMAGE THE CAMERA
AND MAY VOID YOUR
N
IKON WARRANTY.
The use of third-party rechargeable Li-ion batteries not bearing the Nikon holographic seal could interfere with normal operation of the camera or result in the batteries overheating, igniting, rupturing, or leaking.
Holographic seal:
Identifies this device as an authentic Nikon product.
For more information about Nikon brand accessories, contact a local authorized
Nikon dealer.
Before Taking Important Pictures
Before taking pictures on important occasions (such as at weddings or before taking the camera on a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable for damages or lost profits that may result from product malfunction.
iii
iv
About the Manuals
•
No part of the manuals included with this product may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without Nikon’s prior written permission.
•
Illustrations and monitor content shown in this manual may differ from the actual product.
•
Nikon reserves the right to change the specifications of the hardware and software described in these manuals at any time and without prior notice.
•
Nikon will not be held liable for any damages resulting from the use of this product.
•
While every effort was made to ensure that the information in these manuals is accurate and complete, we would appreciate it were you to bring any errors or omissions to the attention of the Nikon representative in your area (address provided separately).
Notice Concerning Prohibition of Copying or Reproduction
Note that simply being in possession of material that was digitally copied or reproduced by means of a scanner, digital camera or other device may be punishable by law.
•
Items prohibited by law from being copied or reproduced
Do not copy or reproduce paper money, coins, securities, government bonds or local government bonds, even if such copies or reproductions are stamped “Sample.” The copying or reproduction of paper money, coins, or securities which are circulated in a foreign country is prohibited. Unless the prior permission of the government was obtained, the copying or reproduction of unused postage stamps or post cards issued by the government is prohibited.
The copying or reproduction of stamps issued by the government and of certified documents stipulated by law is prohibited.
•
Cautions on certain copies and reproductions
The government has issued cautions on copies or reproductions of securities issued by private companies (shares, bills, checks, gift certificates, etc.), commuter passes, or coupon tickets, except when a minimum of necessary copies are to be provided for business use by a company. Also, do not copy or reproduce passports issued by the government, licenses issued by public agencies and private groups, ID cards and tickets, such as passes and meal coupons.
•
Comply with copyright notices
The copying or reproduction of copyrighted creative works such as books, music, paintings, woodcut prints, maps, drawings, movies, and photographs is governed by national and international copyright laws. Do not use this product for the purpose of making illegal copies or to infringe copyright laws.
Disposing of Data Storage Devices
Please note that deleting images or formatting data storage devices such as memory cards or built-in camera memory does not completely erase the original image data.
Deleted files can sometimes be recovered from discarded storage devices using commercially available software, potentially resulting in the malicious use of personal image data. Ensuring the privacy of such data is the user’s responsibility.
Before discarding a data storage device or transferring ownership to another person, erase all data using commercial deletion software, or format the device and then completely refill it with images containing no private information (for example, images of empty sky). Care should be taken to avoid injury or damage to property when physically destroying data storage devices.
To delete the Wi-Fi settings, select
Restore default settings
in the Wi-Fi options menu (
Conformity Marking
Follow the procedure below to display some of the conformity markings that the camera complies with.
Press the d
button
M z
menu icon
M
Conformity marking
M k
button
v
vi
For Your Safety
To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them.
The consequences that could result from failure to observe the precautions listed in this section are indicated by the following symbol:
This icon marks warnings, information that should be read before using this Nikon product, to prevent possible injury.
WARNINGS
Turn off in the event of malfunction
Should you notice smoke or an unusual smell coming from the camera or
Charging AC Adapter, unplug the Charging AC Adapter and remove the battery immediately, taking care to avoid burns. Continued operation could result in injury. After removing or disconnecting the power source, take the equipment to a Nikon-authorized service representative for inspection.
Do not disassemble
Touching the internal parts of the camera or Charging AC Adapter could result in injury. Repairs should be performed only by qualified technicians. Should the camera or Charging AC Adapter break open as the result of a fall or other accident, take the product to a Nikon-authorized service representative for inspection, after unplugging the product and/or removing the battery.
Do not use the camera or Charging AC Adapter in the presence of flammable gas
Do not use electronic equipment in the presence of flammable gas, as this could result in explosion or fire.
Handle the camera strap with care
Never place the strap around the neck of an infant or child.
Keep out of reach of children
Particular care should be taken to prevent infants from putting the battery or other small parts into their mouths.
Do not remain in contact with the camera, Charging AC Adapter, or AC adapter for extended periods while the devices are on or in use
Parts of the devices become hot. Leaving the devices in direct contact with the skin for extended periods may result in low-temperature burns.
Do not leave the product where it will be exposed to extremely high temperatures, such as in an enclosed automobile or in direct sunlight
Failure to observe this precaution could cause damage or fire.
Observe caution when handling the battery
The battery may leak, overheat, or explode if improperly handled. Observe the following precautions when handling the battery for use in this product:
•
Before replacing the battery, turn the product off. If you are using the
Charging AC Adapter/AC adapter, be sure it is unplugged.
•
Use only the EN-EL19 Rechargeable Li-ion Battery (included). Charge the battery by using a camera that supports battery charging. To perform this operation, use the EH-71P/EH-71PCH/EH-73P/EH-73PCH Charging AC
Adapter (included) and UC-E21 USB Cable (included). The MH-66 Battery
Charger (available separately) is also available to charge the battery without using a camera.
•
When inserting the battery, do not attempt to insert it upside down or backwards.
•
Do not short or disassemble the battery or attempt to remove or break the battery insulation or casing.
•
Do not expose the battery to flame or to excessive heat.
•
Do not immerse in or expose to water.
•
Put the battery in a plastic bag, etc. in order to insulate it before transporting.
Do not transport or store with metal objects such as necklaces or hairpins.
•
The battery is prone to leakage when fully discharged. To avoid damage to the product, be sure to remove the battery when no charge remains.
•
Discontinue use immediately should you notice any change in the battery, such as discoloration or deformation.
•
If liquid from the damaged battery comes in contact with clothing or skin, rinse immediately with plenty of water.
Observe the following precautions when handling the Charging
AC Adapter
•
Keep dry. Failure to observe this precaution could result in fire or electric shock.
•
Dust on or near the metal parts of the plug should be removed with a dry cloth. Continued use could result in fire.
•
Do not handle the plug or go near the Charging AC Adapter during lightning storms. Failure to observe this precaution could result in electric shock.
vii
viii
•
Do not damage, modify, forcibly tug or bend the USB cable, place it under heavy objects, or expose it to heat or flames. Should the insulation be damaged and the wires become exposed, take it to a Nikon-authorized service representative for inspection. Failure to observe these precautions could result in fire or electric shock.
•
Do not handle the plug or Charging AC Adapter with wet hands. Failure to observe this precaution could result in electric shock.
•
Do not use with travel converters or adapters designed to convert from one voltage to another or with DC-to-AC inverters. Failure to observe this precaution could damage the product or cause overheating or fire.
Use the appropriate power supply (battery, Charging AC adapter,
AC adapter, USB cable)
Using a power supply other than those provided or sold by Nikon could result in damage or malfunction.
Use appropriate cables
When connecting cables to the input and output jacks, use only the cables provided or sold by Nikon for the purpose, to maintain compliance with product regulations.
Do not touch the moving parts of the lens
Failure to observe this precaution could result in injury.
Handle moving parts with care
Be careful that your fingers or other objects are not pinched by the lens cover or other moving parts.
Using the flash close to your subject’s eyes could cause temporary visual impairment
The flash should be no less than 1 meter (3 ft 4 in.) from the subject.
Particular care should be observed when photographing infants.
Do not operate the flash with the flash window touching a person or object
Failure to observe this precaution could result in burns or fire.
Avoid contact with liquid crystal
Should the monitor break, care should be taken to avoid injury caused by broken glass and to prevent liquid crystal from the monitor touching the skin or entering the eyes or mouth.
Follow the instructions of airline and hospital personnel
Notices
Notices for Customers in the U.S.A.
IMPORTANT SAFETY INSTRUCTIONS -
SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS
For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet if needed.
The power supply unit is intended to be correctly orientated in a vertical or floor mount position.
Federal Communications Commission (FCC) Radio Frequency
Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/television technician for help.
CAUTIONS
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Nikon Corporation may void the user’s authority to operate the equipment.
Interface Cables
Use the interface cables sold or provided by Nikon for your equipment. Using other interface cables may exceed the limits of Class B Part 15 of the FCC rules.
ix
x
Notice for Customers in the State of California
WARNING
Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Wash hands after handling.
Nikon Inc.,
1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A.
Tel: 631-547-4200
Notice for Customers in Canada
CAN ICES-3 B / NMB-3 B
Notices for Customers in Europe
CAUTIONS
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
This symbol indicates that electrical and electronic equipment is to be collected separately.
The following apply only to users in European countries:
•
This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
•
Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
•
For more information, contact the retailer or the local authorities in charge of waste management.
This symbol on the battery indicates that the battery is to be collected separately.
The following apply only to users in European countries:
•
All batteries, whether marked with this symbol or not, are designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
•
For more information, contact the retailer or the local authorities in charge of waste management.
Wi-Fi (Wireless LAN Network)
This product is controlled by the United States Export Administration
Regulations, and you are required to obtain permission from the United States government if you export or re-export this product to any country to which the
United States embargoes goods. The following countries were subject to embargo: Cuba, Iran, North Korea, Sudan, and Syria. Since the target countries are subject to change, please contact the United States Department of
Commerce for the latest information.
Restrictions on Wireless Devices
The wireless transceiver included in this product conforms to wireless regulations in the country of sale and is not for use in other countries (products purchased in the EU or EFTA can be used anywhere within the EU and EFTA).
Nikon does not accept liability for use in other countries. Users who are unsure as to the original country of sale should consult with their local Nikon service center or Nikon-authorized service representative. This restriction applies to wireless operation only and not to any other use of the product.
Notice for Customers in the U.S.A. and Canada
Federal Communications Commission (FCC) and Industry of Canada
(IC)
Declaration of Conformity
This device complies with Part 15 of FCC Rules and Industry Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.
FCC/IC RF Exposure Statement
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research.
xi
xii
COOLPIX S7000, which is equipped with a WSDB-686GN (FCC
ID:2AAD3AA1G0J0 / IC ID: 4634A-2150EC) Wireless LAN Module, has been tested and found to comply with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF)
Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. Please refer to the SAR test report that was uploaded to FCC website.
Declaration of Conformity (Europe)
Hereby, Nikon Corporation, declares that COOLPIX S7000 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/
EC. The declaration of conformity may be consulted at http://imaging.nikon.com/support/pdf/DoC_S7000.pdf
.
Notice for Customers in Jamaica
This product contains a Type Approved Module by Jamaica: “SMA – WSDB-
686GN”
Precautions when Using Radio Transmissions
Always keep in mind that radio transmission or reception of data is subject to interception by third parties. Note that Nikon is not responsible for data or information leaks that may occur during data transfer.
Personal Information Management and Disclaimer
•
User information registered and configured on the product, including wireless LAN connection settings and other personal information, is susceptible to alteration and loss resulting from operational error, static electricity, accident, malfunction, repair or other handling. Always keep separate copies of important information. Nikon is not responsible for any direct or indirect damages or lost profits resulting from alteration or loss of content that is not attributable to Nikon.
•
Before discarding this product or transferring it to another owner, perform
Reset all
76) to delete all user information registered
and configured with the product, including wireless LAN connection settings and other personal information.
xiii
xiv
Table of Contents
Turn the Ca m era On and Set the Displa y Language, Date, and Ti m e ................. 10
Basic Shooting and Pla y back Operations ....................................................... 12
Special Effects Mode (Appl y ing Effects When Shooting)......................................... 33
S m art Portrait Mode (Enhancing Hu m an Faces When Shooting)......................... 35
Short Movie Show Mode (Co m bining Movie Clips to Create Short Movies) .... 38
Creative Slider (Adjusting Brightness (E x posure Co m pensation),
Functions That Cannot Be Used Si m ultaneousl y When Shooting........................ 56
xv
xvi
Viewing and Deleting I m ages Captured Continuousl y (Sequence)..................... 61
Red-eye Correction: Correcting Red-eye When Shooting with the Flash ............. 65
The Shooting Menu (The Co mm on Shooting Options)............................................ 78
(Auto) Mode) .................................................................... 80
Copy (Copy Between the Memory Card and Internal Memory).................................. 94
Using the Wi-Fi (Wireless LAN) Function ..................................................... 117
xvii
xviii
Connecting the Ca m era to a TV, Printer, or Co m puter........................... 121
Parts of the Camera
The Camera Body
1 2 3 4 5
14
13
12
11
6
7
8
9
10
Lens cover closed
1
Flash............................................................ 41
2
Mode dial......................................... 12, 19
3
Shutter-release button.................... 13
4
Zoom control........................................ 15
f
: Wide-angle................................ 15
g
: Telephoto..................................... 15
h
: Thumbnail playback
........................................................... 16, 59
i
: Playback zoom.................. 16, 58
j
: Help ............................................... 23
5
Power switch/power-on lamp... 10
6
Self-timer lamp .................................... 44
AF-assist illuminator
7
Microphone (stereo)......................... 12
8
Lens
9
Lens cover
10
Speaker
11
Eyelet for camera strap ...................... ii
12
Connector cover......................... 8, 121
13
HDMI micro connector (Type D)
.................................................................... 121
14
Micro-USB connector............... 8, 121
1
2
13
12
3
4
5
6
7
8
1
2
11
9
10
1
2
Charge lamp.............................................8
Flash lamp............................................... 41
b
( e
movie-record) button
............................................................... 20, 69
3
c
(playback) button ...................... 16
4
Z
(Wi-Fi) button........117, 118, 120
5
Multi selector ........................ 16, 20, 76
6
k
(apply selection) button ......... 10
7
l
(delete) button ...................... 17, 62
8
9
d
(menu) button
............................................ 33, 68, 76, 126
Battery-chamber/
memory card slot cover ....................7
10
Power connector cover (for optional AC adapter)
11
Tripod socket ..................................... 151
12
Monitor........................................................3
13
N-Mark (NFC antenna)........118, 120
The Monitor
The information that is displayed in the monitor during shooting and playback changes depending on the camera’s settings and state of use.
By default, information is displayed when the camera is turned on and when you operate the camera, and turns off after a few seconds (when
Photo info
is set to
Auto info
in
Monitor settings
(
Shooting Mode
6
2
3 4
5
7
8
1
+1.0
29m 0s
12
9
10
11
13
14
15
18 17 16
1
Shooting mode
................................19, 21, 22, 33, 35, 38
2
Flash mode............................................. 41
3
Macro mode .......................................... 45
4
Zoom indicator............................ 15, 45
5
Focus indicator .................................... 13
6
Movie options (normal speed
movies) ..................................................... 97
7
Movie options (HS movies) .......... 98
8
Image mode .......................................... 78
9
Easy panorama..................................... 30
10
Photo VR icon .................................... 111
11
Movie VR icon.................................... 102
12
Wind noise reduction ................... 103
13
Exposure compensation value
............................................................... 47, 49
14
Remaining movie recording time
....................................................................... 69
15
Number of exposures remaining
(still images)........................................... 12
16
Internal memory indicator............ 12
17
Aperture value ..................................... 15
18
Shutter speed ....................................... 15
3
4
40
33
32
37
38
H LL
35
34
31
120 60
36
30
29
28
41
39
27
26
45
43
25 24
23
44
22
46
22
42
+1.0
29m 0s
21 20 19
19
20
21
Focus area (target finding AF)
............................................................... 52, 86
Focus area (manual or center)
............................................................... 55, 85
Focus area (face detection,
pet detection)................27, 35, 53, 85
22
Focus area (subject tracking)
............................................................... 86, 87
23
ISO sensitivity........................................ 84
24
Battery level indicator...................... 12
25
Charging AC Adapter connection indicator
26
Date stamp.......................................... 110
27
“Date not set” indicator ............... 141
28
Wi-Fi communication indicator
..........................................................104, 118
29
Travel destination icon................. 106
30
Soft .............................................................. 35
31
Foundation makeup......................... 35
32
White balance mode........................ 80
33
Special effects....................................... 33
34
Skin softening....................................... 35
35
Hue...................................................... 35, 46
36
Vividness .......................................... 35, 46
37
Continuous shooting mode........ 82
38
Time-lapse movie............................... 28
39
Blink proof icon.................................... 90
40
Hand-held/tripod....................... 24, 25
41
Backlighting (HDR) ............................ 24
42
Self-timer indicator............................ 43
43
Smile timer ............................................. 36
44
Pet portrait auto release................. 27
45
Self-Collage ............................................ 37
46
Still image capture (during movie
recording) ............................................... 72
Playback Mode
1
2
3
4
5
6
7 8 9
10
11
9999. JPG
15/11/2015 15:30
1
List by date icon .................................. 60
2
Protect icon............................................ 93
3
Sequence display (when
Individual pictures
is selected)
....................................................................... 95
4
Glamour retouch icon ..................... 66
5
Quick effects icon............................... 63
6
D-Lighting icon.................................... 64
7
Quick retouch icon............................ 64
8
Red-eye correction icon................. 65
9
Internal memory indicator
10
Current image number/ total number of images
11
Movie length or elapsed playback time
5
6
15
16
12
13
14
24
23 22
9999. JPG
15/11/2015 15:30
21 20
19 18 17
12
Image mode .......................................... 78
13
Easy panorama..................................... 32
14
Movie options....................................... 97
15
Small picture icon .............................. 67
16
Crop icon ......................................... 58, 68
17
Volume indicator ................................ 73
18
Quick effects guide
19
Easy panorama playback guide
Sequence playback guide
Movie playback guide
20
Time of recording
21
Date of recording
22
Battery level indicator...................... 12
23
Charging AC Adapter connection indicator
24
File number and type ................... 147
Preparing for Shooting
Insert the Battery and Memory Card
Batter y latch Me m or y card slot
•
With the battery’s positive and negative terminals oriented correctly, move the orange battery latch (
3
), and fully insert the battery (
4
).
•
Slide the memory card in until it clicks into place (
5
).
•
Be careful not to insert the battery or memory card upside-down or backward, as this could cause a malfunction.
B
Formatting a Memory Card
The first time you insert a memory card that has been used in another device into this camera, make sure to format it with this camera. Insert the memory card into the camera, press the d
button, and select
Format card
in the setup menu (
Removing the Battery or Memory Card
Turn the camera off and make sure that the power-on lamp and monitor have turned off, and then open the battery-chamber/memory card slot cover.
•
Move the battery latch to eject the battery.
•
Gently push the memory card into the camera to partially eject the memory card.
•
Be careful when handling the camera, battery, and memory card immediately after using the camera, as they may become hot .
Memory Cards and Internal Memory
Camera data, including images and movies, can be saved either on a memory card or in the camera’s internal memory. To use the camera’s internal memory, remove the memory card.
7
Charge the Battery
1
With the batter
y
installed, connect the ca
m
era to an electrical outlet.
Charging AC Adapter
Electrical outlet
8
USB cable (included)
Charge la m p
If a plug adapter* is included with your camera, securely connect it to the
Charging AC Adapter. Once the two are connected, attempting to forcibly remove the plug adapter could damage the product.
* The shape of the plug adapter varies according to the country or region in which the camera was purchased. This step can be omitted if the plug adapter comes permanently bonded to the Charging AC Adapter.
•
The charge lamp slowly flashes green to indicate that the battery is charging.
•
When charging is complete, the charge lamp turns off. It takes about 1 hour and 50 minutes to charge a fully exhausted battery.
•
The battery cannot be charged when the charge lamp quickly flashes green, possibly due to one of the reasons described below.
- The ambient temperature is not suited to charging.
- The USB cable or Charging AC Adapter is not properly connected.
- The battery is damaged.
2
Disconnect the Charging AC Adapter fro
m
the electrical outlet and then disconnect the USB cable.
B
Notes About the USB Cable
•
Do not use a USB cable other than the UC-E21. Using a USB cable other than the
UC-E21 could result in overheating, fire or electric shock.
•
Make sure that the plugs are properly oriented. Do not insert or remove the plugs at an angle when connecting or disconnecting them.
B
Notes About Charging the Battery
•
The camera can be operated while the battery is charging, but the charging time increases.
•
If the battery level is extremely low, you may not be able to operate the camera while the battery is charging.
•
Do not, under any circumstances, use another make or model of AC adapter other than the EH-71P/EH-71PCH/EH-73P/EH-73PCH Charging AC Adapter, and do not use a commercially available USB-AC adapter or a battery charger for a mobile phone. Failure to observe this precaution could result in overheating or in damage to the camera.
C
Charging Using a Computer or Battery Charger
•
You can also charge the battery by connecting the camera to a computer.
•
You can use the MH-66 Battery Charger (available separately) to charge the battery without using the camera.
9
10
Turn the Camera On and Set the Display
Language, Date, and Time
When the camera is turned on for the first time, the language-selection screen and the date and time setting screen for the camera clock are displayed.
1
Press the power switch to turn on the ca
m
era.
•
The monitor turns on.
•
To turn the camera off, press the power switch again.
2
Use the
m
ulti selector
HI
to select the desired language and press the
k
button.
Language
Български
Čeština
Dansk
Deutsch
English
Español
Cancel
3
Select
Yes
and press the
k
button.
4
Select
y
our ho
m
e ti
m
e zone and press the
k
button.
•
Press
H
to display
W above the map and enable daylight saving time. Press
I
to disable it.
London, Casablanca
Back
5
Use
HI
to select the date for
m
at and press the
k
button.
6
Set the date and ti
m
e, and press the
k
button.
•
Use
JK
to select a field and then use
HI to set the date and time.
•
Select the minute field and press the k button to confirm the setting.
Date and time
D M Y h m
15 11 2015 15 30
Edit
7
When the confir
m
ation dialog is displa
y
ed, use
HI
to select
Yes
and press the
k
button.
•
When settings are finished, the lens extends and the camera switches to shooting mode.
C
Changing the Language or the Date and Time Setting
•
You can change these settings using the
Language
and
Time zone and date
settings in the z
•
You can enable or disable daylight saving time in the z
setup menu by selecting
Time zone and date
followed by
Time zone
. Press the multi selector
K
and then
H
to enable daylight saving time and move the clock forward one hour, or
I
to disable daylight saving time and move the clock back one hour.
C
The Clock Battery
•
The camera’s clock is powered by a built-in backup battery.
The backup battery charges when the main battery is inserted into the camera or when the camera is connected to an optional AC adapter, and it can run the clock for several days after about 10 hours of charging.
•
If the camera’s backup battery becomes exhausted, the date and time setting screen is displayed when the camera is turned on. Set the date and time again
11
12
Basic Shooting and Playback
Operations
Shooting with
A
(Auto) Mode
1
Rotate the
m
ode dial to
A
.
•
The camera enters
A
(auto) mode and can be used for general shooting.
•
Battery level indicator b
: The battery level is high.
B
: The battery level is low.
•
Number of exposures remaining
C
is displayed when no memory card is inserted in the camera, and images are saved in the internal memory.
Nu m ber of e x posures re m aining
2
Hold the ca
m
era stead
y
.
•
Keep fingers and other objects away from the lens, flash, AF assist-illuminator, microphone, and speaker.
Batter y level indicator
•
When taking pictures in portrait (“tall”) orientation, turn the camera so that the flash is above the lens.
3
Fra
m
e the picture.
•
Move the zoom control to change the zoom lens position.
Zoo m out Zoo m in
4
Press the shutter-release button halfwa
y
.
•
When the subject is in focus, the focus area or focus indicator is displayed in green.
•
When you are using digital zoom, the camera focuses in the center of the frame and the focus area is not displayed.
•
If the focus area or focus indicator flashes, the camera is unable to focus.
Modify the composition and try pressing the shutter-release button halfway again.
5
Without lifting
y
our finger, press the shutter-release button the rest of the wa
y
down.
13
14
B
Notes About Saving Images or Movies
The indicator showing the number of exposures remaining or the indicator showing the remaining recording time flashes while images or movies are being saved.
Do not open the battery-chamber/memory card slot cover or remove the battery or memory card
while an indicator is flashing. Doing this could result in loss of data, or in damage to the camera or the memory card.
C
The Auto Off Function
•
When no operations are performed for about one minute, the monitor turns off, the camera enters standby mode, and then the power-on lamp flashes. The camera turns off after remaining in standby mode for about three minutes.
•
To turn the monitor back on while the camera is in standby mode, perform an operation such as pressing the power switch or shutter-release button.
C
When Using a Tripod
•
We recommend using a tripod to stabilize the camera in the following situations:
- When shooting in dim lighting with the flash mode (
W
(off)
- When the zoom is at a telephoto position
•
When using a tripod to stabilize the camera during shooting, set
Photo VR
to
Off
76) to prevent potential errors caused by this function.
Using the Zoom
When you move the zoom control, the zoom lens position changes.
•
To zoom in: Move toward g
•
To zoom out: Move toward f
When you turn the camera on, the zoom moves to the maximum wide-angle position.
Wide-angle Telephoto
•
A zoom indicator is displayed on the shooting screen when the zoom control is moved.
•
Digital zoom, which allows you to further magnify the subject up to approximately 4×
Optical zoo m
Digital zoo m the maximum optical zoom ratio, can be activated by moving and holding the zoom control toward g
when the camera is zoomed in to the maximum optical zoom position.
C
Digital Zoom
The zoom indicator changes to blue when the digital zoom is activated, and it changes to yellow when the zoom magnification is increased further.
•
Zoom indicator is blue: Image quality is not noticeably reduced by using the
Dynamic Fine Zoom.
•
Zoom indicator is yellow: There may be cases in which image quality is noticeably reduced.
•
The indicator remains blue across a wider area when the image size is smaller.
•
The zoom indicator may not change to blue when using certain continuous shooting settings or other settings.
The Shutter-release Button
Press halfwa y
Press all the wa y
To set focus and exposure (shutter speed and aperture value), press the shutter-release button lightly until you feel a slight resistance. Focus and exposure remain locked while the shutter-release button is pressed halfway.
Press the shutter-release button all the way to release the shutter and take a picture.
Do not use force when pressing the shutter-release button, as this may result in camera shake and blurred images. Press the button gently.
15
16
Play Back Images
1
Press the
c
(pla
y
back) button to enter pla
y
back
m
ode.
•
If you press and hold down the c
button while the camera is turned off, the camera turns on in playback mode.
2
Use the
m
ulti selector to select an i
m
age to displa
y
.
•
Press and hold down
HIJK
to scroll through the images quickly.
•
To return to shooting mode, press the c button or shutter-release button.
Displa y the previous i m age
Displa y the ne x t i m age
•
When e
is displayed in full-frame playback mode, you can press the k button to apply an effect to the image.
0004. JPG
15/11/2015 15:30
•
Move the zoom control toward g
( i
) in full-frame playback mode to zoom in on an image.
•
In full-frame playback mode, move the zoom control toward f
( h
) to switch to thumbnail playback mode and display multiple images on the screen.
Delete Images
1
Press the
l
(delete) button to delete the i
m
age currentl
y
displa
y
ed in the
m
onitor.
2
Use the
m
ulti selector
HI
to select the desired deletion
m
ethod and press the
k
button.
•
To exit without deleting, press the d button.
3
Select
Yes
and press the
k
button.
•
Deleted images cannot be recovered.
Delete
Current image
Erase selected images
All images
Erase 1 image?
Yes
No
B
Deleting Images Captured Continuously (Sequence)
•
Images captured continuously are saved as a sequence, and only the first image of the sequence (the key picture) is displayed in playback mode.
•
If you press the l
button while a key picture is displayed for a sequence of images, all images in the sequence are deleted.
0004. JPG
15/11/2015 15:30
•
To delete individual images in a sequence, press the k
button to display them one at a time and press the l
button.
C
Deleting the Image Captured While in Shooting Mode
When using shooting mode, press the l
button to delete the last image that was saved.
17
18
Operating the Erase Selected Images Screen
1
Use the
m
ulti selector
JK
to select an i
m
age to be deleted, and then use
HI
to displa
y
K
.
•
To undo the selection, press
HI
to remove
K
.
•
g
( i
) to switch to full-frame playback or f
( h
) to switch to thumbnail playback.
Erase selected images
Back
2
Add
K
to all i
m
ages that
y
ou want to delete and then press the
k
button to confir
m
the selection.
•
A confirmation dialog is displayed. Follow the on-screen instructions to complete operations.
Changing the Shooting Mode
Rotate the mode dial to select one of the following shooting modes.
•
A
(Auto) mode
Used for general shooting. Settings can be changed to suit the shooting conditions and the type of shot that you want to capture.
•
x
,
y
,
X
,
W
(Scene) modes
Camera settings are optimized according to the scene that you select.
x
(scene auto selector): The camera automatically recognizes the shooting scene when you frame a picture, making it easier to shoot pictures using settings that suit the scene.
y
: Press the d
button and select a scene.
In time-lapse movie scene mode, the camera can automatically capture
300 still images at a specified interval to create time-lapse movies
( e
1080/30p
) that are approximately 10 seconds long.
-
X
(night landscape): Use this mode to shoot night landscapes.
-
W
(backlighting): Fill flash fires to prevent the backlit subject from being hidden in shadow, or the HDR function can be used to shoot scenes with high contrast.
•
u
(Special effects) mode
Effects can be applied to images during shooting. Press the d
button to select the effect.
•
F
(Smart portrait) mode
Use glamour retouch to enhance human faces during shooting, and use the smile timer or self-collage function to take pictures.
•
n
(Short movie show) mode
You can create a short movie ( e
1080/30p
or
S
1080/25p
) that is up to 30 seconds long by recording and automatically combining multiple movie clips that are several seconds long.
19
20
Using the Flash, Self-timer, Etc.
When the shooting screen is displayed, you can press the multi selector
H
( m
)
J
( n
)
I
( p
)
K
( o
) to set the functions described below.
•
m
Flash mode
You can select a flash mode to match the shooting conditions.
•
n
Self-timer
The camera releases the shutter 10 seconds or 2 seconds after you press the shutter-release button.
•
p
Macro mode
Use macro mode when you take close-up pictures.
•
o
Creative slider
( o
brightness (e x posure co m pensation),
G
vividness, and
F
hue)
In
A
(auto) mode, you can adjust overall image brightness, vividness, and hue.
In scene mode, special effects mode, or short movie show mode, you can adjust overall image brightness (exposure compensation).
In smart portrait mode, you can apply glamour retouch to enhance human faces.
The functions that can be set vary depending on the shooting mode.
Recording Movies
Display the shooting screen and press the b
( e movie-record) button to start recording a movie.
Press the b
( e
) button again to end recording.
•
To play back a movie, select a movie in fullframe playback mode and press the k
button.
Shooting Features
A
(Auto) Mode
Used for general shooting. Settings can be adjusted to suit the shooting conditions and the type of shot you want to capture.
•
You can change how the camera selects the area of the frame to focus on by changing the
AF area mode
The default setting is
Target finding AF
(
Functions Available in
A
(Auto) Mode
•
•
•
•
Creative slider (
•
21
22
Scene Mode (Shooting Suited to Scenes)
When a scene is selected, camera settings are automatically optimized for the selected scene.
x
(Scene auto selector) (
When you frame a picture, the camera automatically selects the optimum scene for simpler shooting.
X
(Night landscape)
(
1,2
W
(Backlighting)
(
2
Rotate the mode dial to
X
, or
W
and take pictures.
y
(Scene)
Press the d
button to display the scene menu and select one of the following shooting scenes.
b
Portrait (default setting) c
Landscape
1, 2
N
Time-lapse movie (
d
2 e
Night portrait (
f
2
Z
Beach
2 z
Snow
2 h
Sunset
2, 3 i
Dusk/dawn
1, 2, 3 k
u
Food (
m
Fireworks show
1, 3 p
O
Pet portrait (
Portrait
Landscape
Time-lapse movie
Sports
Night portrait
Party/indoor
1
2
3
The camera focuses at infinity.
The camera focuses on the area in the center of the frame.
Use of a tripod is recommended, because the shutter speed is slow. Set
Photo VR
Off
in the setup menu when using a tripod to stabilize the camera during shooting.
Displaying a Description of Each Scene Mode (Help Display)
Select a scene and move the zoom control
(
g
( j
) to view a description of that scene. To return to the previous screen, move the zoom control toward g
( j
) again.
Portrait
Landscape
Time-lapse movie
Sports
Night portrait
Party/indoor
Tips and Notes
x
Scene auto selector
•
When you point the camera at the subject, the camera automatically recognizes the shooting scene mode from the list below and adjusts the shooting settings accordingly.
e
Portrait (for taking close-up portraits of one or two people) b
Portrait (for taking portraits of large numbers of people, or images in which the background takes up a large portion of the frame)
Landscape f h c
Night portrait (for taking close-up portraits of one or two people)
Night portrait (for taking portraits of large numbers of people, or images in which the background takes up a large portion of the frame) g i j d d
Night landscape
Close-up
Backlighting (for taking pictures of subjects other than people)
Backlighting (for taking portrait pictures)
Other scenes
•
The focus area depends on the composition of the image. When the camera detects a human face, it focuses on that face (
•
Depending on shooting conditions, the camera may not select the desired scene mode. In this case, select another shooting mode (
23
24
X
Night landscape
•
Press the d
button, and select u
Hand-held
or w
Tripod
from
Night landscape
.
•
u
Hand-held
(default setting):
- While the j
icon on the shooting screen is displayed in green, press the shutter-release button all the way to capture a series of images which are combined into a single image and saved.
- Once the shutter-release button is pressed all the way, hold the camera still until a still image is displayed. After taking a picture, do not turn the camera off before the monitor switches to the shooting screen.
- The angle of view (i.e., the area visible in the frame) seen in the saved image is narrower than that seen in the monitor at the time of shooting.
•
w
Tripod
:
- One image is captured at a slow shutter speed when the shutter-release button is pressed all the way.
- Vibration reduction is disabled even when
Photo VR
is set to
On
.
W
Backlighting
•
Press the d
button, and select
On
or
Off
to enable or disable
HDR
(high dynamic range) composition from
Backlighting
based on the type of image you want to capture.
•
Off
(default setting): The flash fires to prevent the subject from being hidden in shadow.
- When the shutter-release button is pressed all the way down, one image is captured.
•
On
: Use when taking pictures with very bright and dark areas in the same frame.
- When the shutter-release button is pressed all the way, the camera shoots images continuously at high speed, and saves the following two images:
- A non-HDR composite image
- An HDR composite image in which the loss of details in highlights or shadows is minimized
- If there is only enough memory to save one image, an image processed by D-
Lighting (
64) at the time of shooting, in which dark areas of the image are
corrected, is the only image saved.
- Once the shutter-release button is pressed all the way, hold the camera still until a still image is displayed. After taking a picture, do not turn the camera off before the monitor switches to the shooting screen.
- The angle of view (i.e., the area visible in the frame) seen in the saved image is narrower than that seen in the monitor at the time of shooting.
y M d
Sports
•
While the shutter-release button is held all the way down, the camera shoots up to about 7 images continuously at a rate of about 7.9 fps (when image mode is set to
P
).
•
The frame rate for continuous shooting may vary depending on the current image mode setting, the memory card used, or shooting conditions.
•
Focus, exposure, and hue are fixed at the values determined with the first image in each series.
y M e
Night portrait
•
On the screen displayed when e
Night portrait
is selected, select u
Hand-held
or w
Tripod
.
•
u
Hand-held
(default setting):
- While the e
icon on the shooting screen is displayed in green, press the shutter-release button all the way to capture a series of images which are combined into a single image and saved.
- Once the shutter-release button is pressed all the way, hold the camera still until a still image is displayed. After taking a picture, do not turn the camera off before the monitor switches to the shooting screen.
- If the subject moves while the camera is shooting continuously, the image may be distorted, overlapped, or blurred.
•
w
Tripod
:
- One image is captured at a slow shutter speed when the shutter-release button is pressed all the way.
- Vibration reduction is disabled even when
Photo VR
is set to
On
.
y M f
Part y /indoor
•
To avoid the effects of camera shake, hold the camera steady. Set
Photo VR
Off
in the setup menu when using a tripod to stabilize the camera during shooting.
25
26
y M k
Close-up
•
45) is enabled and the camera automatically zooms to the closest
position at which it can focus.
•
You can move the focus area. Press the k
button, use the multi selector
HIJK to move the focus area, and press the k
button to apply the setting.
y M u
Food
•
45) is enabled and the camera automatically zooms to the closest
position at which it can focus.
•
You can adjust hue by using the multi selector
HI
. The hue setting is saved in the camera’s memory even after the camera is turned off.
•
You can move the focus area. Press the k
button, use the multi selector
HIJK
to move the focus area, and press the k
button to apply the setting.
y M m
Fireworks show
•
The shutter speed is fixed at 4 seconds.
•
The zoom is restricted to 4 fixed positions.
y M
O
Pet portrait
•
When you point the camera at a dog or cat, the camera detects the pet’s face and focuses on it. By default, the camera detects a dog or cat face and automatically releases the shutter (pet portrait auto release).
•
On the screen displayed when
O
Pet portrait
is selected, select
U
Single
or
V
Continuous
.
-
U
Single
: The camera captures one image when a dog or cat face is detected.
-
V
Continuous
: The camera captures three images continuously when a dog or cat face is detected.
B
Pet Portrait Auto Release
•
Press the multi selector
J
( n
) to change the
Pet portrait auto release
setting.
-
Y
: The camera detects a dog or cat face and automatically releases the shutter.
k
: The camera does not release the shutter automatically, even if a dog or cat face is detected. Press the shutter-release button. The camera also detects human faces when k
is selected.
•
Pet portrait auto release
is set to k
after 5 bursts have been taken.
•
Shooting is also possible by pressing the shutter-release button, regardless of the
Pet portrait auto release
setting.
When
V
Continuous
is selected, you can take pictures continuously while holding down the shutter-release button all the way.
B
Focus Area
•
When the camera detects a face, the face is displayed inside a yellow border. When the camera acquires focus on a face displayed inside a double border (focus area), the double border changes to green. If no faces are detected, the camera focuses on the subject in the center of the frame.
•
Under some shooting conditions, the pet face may not be detected and other subjects may be displayed inside a border.
27
28
Shooting Time-lapse Movies
The camera can automatically capture 300 still images at a specified interval to create time-lapse movies ( e
1080/30p
) that are approximately 10 seconds long.
Rotate the m ode dial to y M d
button
M
N
Ti m e-lapse m ovie
M k
button
T y pe
O
Cit y scape (10 m inutes)
(default setting)
P
Landscape (25 m inutes)
Interval ti m e
2 s
5 s
Recording ti m e
10 min
25 min
Q
Sunset (50 m inutes)
R
Night sk y (150 m inutes)
1, 2
10 s
30 s
50 min
2 h 30 min
S
Star trails (150 m inutes)
2, 3
30 s 2 h 30 min
1
2
3
Suited for recording the movement of stars. The focus is fixed at infinity.
The zoom is restricted to 4 fixed positions.
Star movement appears as lines of light due to image processing. The focus is fixed at infinity.
1
Use the
m
ulti selector
HI
to select a t
y
pe, and press the
k
button.
Time-lapse movie
Cityscape (10 minutes)
Landscape (25 minutes)
Sunset (50 minutes)
Night sky (150 minutes)
Star trails (150 minutes)
2
Select whether or not to fi
x
e
x
posure (brightness), and press the
k
button (e
x
cept Night sk
y
and Star trails).
•
If
AE-L on
is selected, the exposure used for the first image is used for all images. Use of
AE-L off
is recommended when the changes in brightness of the subject are significant, such as in the twilight.
Time-lapse movie
AE-L on
AE-L off
3
Stabilize the ca
m
era b
y
using a tool such as a tripod.
4
Press the shutter-release button to capture the first i
m
age.
•
Set exposure compensation (
releasing the shutter for the first image.
Exposure compensation cannot be changed after the first image is captured. Focus and hue are fixed when the first image is captured.
End recording
•
The shutter is automatically released for the second and subsequent images.
•
The monitor may turn off while the camera is not capturing images.
•
Shooting ends automatically when 300 images are captured.
•
To end shooting manually before 300 images are captured, press the k button.
•
Sound and still images cannot be saved.
B
Notes About Time-lapse Movie
•
The camera cannot capture images if a memory card is not inserted. Do not exchange the memory card until shooting is complete.
•
Use a fully charged battery to prevent the camera from turning off unexpectedly.
•
Time-lapse movies cannot be recorded by pressing the b
( e
) button.
•
Do not rotate the mode dial until shooting is complete.
•
Vibration reduction is disabled even when
Photo VR
set to
On
.
29
30
Shooting with Easy Panorama
Rotate the m ode dial to y M d
button
M p
Eas y panora m a
M k
button
1
Select
W
Normal
or
X
Wide
as the shooting range and press the
k
button.
Easy panorama
Normal
•
When the camera is readied in the horizontal position, the image size (width × height) is as follows:
-
W
Normal
: 4800 × 920 when moved
Wide horizontally, 1536 × 4800 when moved vertically
-
X
Wide
: 9600 × 920 when moved horizontally, 1536 × 9600 when moved vertically
2
Fra
m
e the first edge of the panora
m
a scene, and then press the shutter-release button halfwa
y
to focus.
•
The zoom position is fixed at wide-angle position.
•
The camera focuses in the center of the frame.
3
Press the shutter-release button all the wa
y
, and then re
m
ove
y
our finger fro
m
the shutter-release button.
•
KLJI
are displayed to indicate the direction of camera movement.
4
Move the ca
m
era in one of the four directions until the guide indicator reaches the end.
•
When the camera detects which direction it is moving in, shooting begins.
•
Shooting ends when the camera captures the specified shooting range.
•
Focus and exposure are locked until shooting ends.
Guide
Example of camera movement
•
Using your body as the axis of rotation, move the camera slowly in an arc, in the direction of the marking (
KLJI
).
•
Shooting stops if the guide does not reach the edge within about 15 seconds (when
W
Normal
is selected) or within about 30 seconds (when
X
Wide
is selected) after shooting starts.
B
Notes About Easy Panorama Shooting
•
The range of the image seen in the saved image is narrower than that seen in the monitor at the time of shooting.
•
If the camera is moved too quickly or shaken too much, or if the subject is too uniform (e.g. walls or darkness), an error may occur.
•
If shooting is stopped before the camera reaches the half-way point in the panorama range, a panorama image is not saved.
•
If more than half of the panorama range is captured but shooting ends before reaching the edge of the range, the range not captured is recorded and displayed in gray.
31
32
Playback with Easy Panorama
Switch to playback mode (
image captured using easy panorama in fullframe playback mode, and then press the k button to scroll the image in the direction that was used when shooting.
Playback controls are displayed in the monitor during playback.
Use the multi selector
JK
to select a control, and then press the k
button to perform the operations described below.
0004. JPG
15/11/2015 15:30
Function
Rewind
Advance
Pause
End
Icon
A
B
E
G
Description
Hold down the k
button to scroll backward quickly.
Hold down the k
button to scroll forward quickly.
Pause playback. The operations listed below can be performed while paused.
C
D
Hold down the k
button to rewind.
Hold down the k
button to scroll.
F
Resume automatic scrolling.
Switch to full-frame playback mode.
B
Notes About Easy Panorama Images
•
The images cannot be edited on this camera.
•
This camera may not be able to scroll the playback of, or zoom in on, easy panorama images captured with another make or model of digital camera.
B
Notes About Printing Panorama Images
The entire image may not be able to be printed depending on the printer’s settings.
Additionally, printing may not be possible depending on the printer.
Special Effects Mode (Applying Effects
When Shooting)
Effects can be applied to images during shooting.
Image mode
Special effects
Special effects
Soft
Press the d
(menu) button to display the special effects menu and select an effect using the multi selector.
T y pe
O
Soft*
(default setting)
P
Nostalgic sepia*
F
High-contrast m ono.*
I
Selective color l
Pop o
Cross process m
To y ca m era effect 1*
Description
Softens the image by adding a slight blur to the entire image.
Adds a sepia tone and reduces the contrast to simulate the qualities of an old photograph.
Changes the image to black and white and gives it sharp contrast.
Creates a black and white image in which only the specified color remains.
Increases the color saturation of the entire image to create a bright look.
Gives the image a mysterious appearance based on a specific color.
Gives the entire image a yellowish hue and darkens the image periphery.
33
34
b y pe n
To y ca m era effect 2*
T
Mirror*
Description
Decreases the color saturation of the entire image and darkens the image periphery.
Creates a bilaterally symmetric image whose right half is an inverted mirror image of the left half.
* Certain
Movie options
(
•
The camera focuses on the area in the center of the frame.
•
When
Selective color
or
Cross process
is selected, use the multi selector
HI
to select the desired color, and press the k
button to apply the color. To change the color selection, press the k
button again.
Save
Smart Portrait Mode (Enhancing Human
Faces When Shooting)
You can take a picture with the glamour retouch function to enhance human faces.
1
Press the
m
ulti selector
K
.
2
Appl
y
an effect.
•
Use
JK
to select the desired effect.
•
Use
HI
to select the amount of effect.
•
You can simultaneously apply multiple effects.
B
Skin softening
, l
Foundation makeup
,
Q
Soft
,
G
Vividness
, o
Brightness (Exp. +/-)
•
Select f
Exit
to hide the slider.
•
After configuring the desired effects, press the k
button to apply them.
Skin softening
Effects
Slider
3
Fra
m
e the picture and press the shutter-release button.
B
Notes About Smart Portrait Mode
•
The amount of effect may differ between the image on the shooting screen and the saved image.
•
When
Soft
is set, some
Movie options
35
36
Functions Available in Smart Portrait Mode
•
Glamour retouch (
•
Smile timer (
•
•
•
•
Using Smile Timer
When you press the multi selector
J
to select a
Smile timer
and press the k
button, the camera automatically releases the shutter whenever a smiling face is detected.
•
Set the glamour retouch function before selecting smile timer (
•
When you press the shutter-release button to take a picture, smile timer is terminated.
Smile timer
B
Notes About Smile Timer
•
Under some shooting conditions, the camera may be unable to detect faces or
53). The shutter-release button can also be used for shooting.
•
This function may not be available to use in combination with other functions
C
When the Self-timer Lamp Flashes
When using smile timer, the self-timer lamp flashes when the camera detects a face and flashes quickly immediately after the shutter is released.
Using Self-Collage
The camera can capture a series of 4 or 9 images at intervals and save them as a one-frame image
(a collage image).
0004. JPG
15/11/2015 15:30
1
Press the
m
ulti selector
J
to select
n
Self-Collage
, and press the
k
button.
•
A confirmation dialog is displayed.
•
When you press the d
button and select
Self-Collage
before pressing
J
, you can configure the settings for
Number of shots
,
Interval
, and
Shutter sound
(
•
If you want to apply glamour retouch when shooting, set the effect before selecting
Self-Collage
2
Take a picture.
•
When you press the shutter-release button, a countdown starts (about five seconds) and the shutter is automatically released.
•
The camera automatically releases the shutter for the remaining pictures. A countdown starts about three seconds before shooting.
•
The number of shots is indicated by
U
in the monitor. It is displayed in green during shooting and it changes to white after shooting.
•
When the camera finishes taking the specified number of shots, the collage image is saved.
•
Each captured image is saved as an individual image separate from the collage image.
B
Notes About Self-Collage
•
If you press the shutter-release button before the camera takes the specified number of shots, shooting is canceled and the collage image is not saved. The pictures that were taken before shooting was canceled are saved as individual images.
•
This function may not be available to use in combination with other functions
37
Short Movie Show Mode (Combining
Movie Clips to Create Short Movies)
You can create a short movie ( e
1080/30p
or
S
1080/25p
) that is up to 30 seconds long by recording and automatically combining multiple movie clips that are several seconds long.
38
1
Press the
d
(
m
enu) button and configure the settings for
Number of shots
Special effects
recording
m
ovies.
•
Number of shots
: Set the number of movie clips that the camera records and the recording time for each movie clip. By default, the camera records 15 movie clips
Background music
End recording that are 2 seconds each to create a 30second short movie.
•
Special effects
: Apply various effects to movies when shooting (
Effects can be changed for each movie clip.
•
Background music
: Select the background music. Move the zoom control
(
g
( i
) to preview it.
•
After the settings are complete, press the d
button or shutter-release button to exit the menu.
2
Press the
b
(
e m
ovie-record) button to record a
m
ovie clip.
•
The camera stops recording the movie clip when the time specified in step 1 elapses.
•
Movie clip recording can be paused temporarily.
See “Pausing Movie Recording” (
0
15
3
Check the recorded
m
ovie clip, or delete it.
•
To check it, press the k
button.
•
To delete it, press the l
button. The last recorded movie clip or all movie clips can be deleted.
•
To continue recording movie clips, repeat the operation in step 2.
•
To change the effects, return to step 1.
Preview
12
15
Nu m ber of m ovie clips recorded
4
Save the short
m
ovie show.
•
The short movie show is saved when the camera finishes recording the specified number of movie clips.
•
To save a short movie show before the camera finishes recording the specified number of movie clips, press the d
button on the shooting screen while a movie clip is not being recorded, and then select
End recording
.
•
Movie clips are deleted when a short movie show is saved.
Operations During Movie Clip Playback
To adjust the volume, move the zoom control while a movie clip is playing (
Playback controls are displayed in the monitor.
The operations described below can be performed by using the multi selector
JK
to select a control and then pressing the k button.
Pla y back controls
Function
Rewind
Advance
Pause
Icon
A
B
E
Description
Hold down the k
button to rewind the movie.
Hold down the k
button to advance the movie.
Pause playback. The operations listed below can be performed while paused.
C
D
F
Rewind the movie one frame. Hold down the k
button for continuous rewinding.
Advance the movie one frame. Hold down the k
button for continuous advancing.
Resume playback.
End pla y back
End recording
G p
Return to the shooting screen.
Save the short movie show using the recorded movie clips.
B
Notes About Recording a Short Movie Show
•
The camera cannot record movies if a memory card is not inserted.
•
Do not exchange the memory card until a short movie show is saved.
39
40
C
Pausing Movie Recording
•
A still image ( l
4608×2592
) can be captured if you press the shutter-release button on the shooting screen while a movie is not being recorded.
•
You can pause movie recording and play back images or enter other shooting modes to take pictures. Movie recording resumes when you enter n
(short movie show) mode again.
Functions Available in Short Movie Show Mode
•
•
•
Exposure compensation (
•
Flash Mode
You can select a flash mode to match the shooting conditions.
1
Press the
m
ulti selector
H
(
m
).
2
Select the desired flash
m
ode
(
42) and press the
k
button.
•
If the setting is not applied by pressing the k
button within a few seconds, the selection will be canceled.
Auto
C
The Flash Lamp
•
The status of the flash can be confirmed by pressing the shutter-release button halfway.
- On: The flash fires when you press the shutter-release button all the way down.
- Flashing: The flash is charging. The camera cannot shoot images.
- Off: The flash does not fire when a picture is taken.
•
If the battery level is low, the monitor turns off while the flash is charging.
41
42
Available Flash Modes
U Auto
The flash fires when necessary, such as in dim lighting.
•
The flash mode icon on the shooting screen is displayed only immediately after the setting is made.
V
Auto with red-e y e reduction
W
Reduce “red-eye” in portraits caused by the flash.
Off
The flash does not fire.
•
We recommend using a tripod to stabilize the camera when shooting in dark surroundings.
Fill flash
X
The flash fires whenever a picture is taken. Use to “fill-in” (illuminate) shadows and backlit subjects.
Y
Slow s y nc
Suited to evening and night portraits that include background scenery.
The flash fires when necessary to illuminate the main subject; slow shutter speeds are used to capture background at night or under dim lighting.
B
Notes About Using the Flash
When you use the flash at the wide-angle zoom position, the edge of the image may be dark depending on the shooting distance.
When you adjust the zoom slightly to a telephoto position, this phenomenon may be improved.
C
The Flash Mode Setting
•
The setting may not be available with some shooting modes (
•
The setting applied in
A
(auto) mode is saved in the camera’s memory even after the camera is turned off.
C
Red-eye Reduction
If the camera detects red eye while saving an image, the affected area is processed to reduce red-eye before the image is saved.
Note the following when shooting:
•
More time than usual is required to save images.
•
Red-eye reduction may not produce the desired results in some situations.
•
In rare cases, red-eye reduction may be applied unnecessarily to other areas of the image. In these cases, select another flash mode and take the picture again.
Self-timer
The camera is equipped with a self-timer that releases the shutter 10 seconds or 2 seconds after you press the shutter-release button.
Set
Photo VR
Off
in the setup menu when using a tripod to stabilize the camera during shooting.
1
Press the
m
ulti selector
J
(
n
).
2
Select
n
10s
or
n
2s
, and press the
k
button.
Self-timer
•
n
10s
(10 seconds): Use on important occasions, such as weddings.
•
n
2s
(2 seconds): Use to prevent camera shake.
•
If the setting is not applied by pressing the k
button within a few seconds, the selection will be canceled.
•
When the shooting mode is
Pet portrait
scene mode,
Y
(pet portrait auto release) is displayed (
27). The self-timer cannot be used.
•
When the shooting mode is smart portrait mode, a
(smile timer) or n
(self-
collage) can also be selected (
3
Fra
m
e the picture and press the shutter-release button halfwa
y
.
•
Focus and exposure are set.
43
44
4
Press the shutter-release button the rest of the wa
y
down.
•
Countdown starts. The self-timer lamp flashes and then glows steadily about one second before the shutter is released.
•
When the shutter is released, the self-timer is set to k
.
•
To stop the countdown, press the shutter-release button again.
99
Macro Mode (Taking Close-up Pictures)
Use macro mode when taking close-up pictures.
1
Press the
m
ulti selector
I
(
p
).
2
Select
o
and press the
k
button.
•
If the setting is not applied by pressing the k
button within a few seconds, the selection will be canceled.
Macro mode
3
Move the zoo
m
control to set the zoo
m
ratio to a position where
F
and the zoo
m
indicator are displa
y
ed in green.
•
When the zoom ratio is set to a position where the zoom indicator is displayed in green, the camera can focus on subjects as close as approximately 10 cm (4 in.) from the lens.
When the zoom is at the position where
G
is displayed, the camera can focus on subjects as close as approximately 1 cm (0.4 in.) from the lens.
C
The Macro Mode Setting
•
The setting may not be available with some shooting modes (
•
If the setting is applied in
A
(auto) mode, it will remain saved in the camera’s memory even after the camera is turned off.
45
46
Creative Slider (Adjusting Brightness
(Exposure Compensation), Vividness, and
Hue)
When the shooting mode is set to
A
(auto) mode, use the creative slider to adjust brightness (exposure compensation), vividness, and hue for capturing images.
1
Press the
m
ulti selector
K
(
o
).
2
Select the ite
m
and
m
ake an adjust
m
ent.
Slider
Brightness (Exp. +/-)
•
JK
: Select an item.
o
: “Brightness (Exposure Compensation)”
+ 2.0
+ 0.3
-
G
: “Vividness (Saturation Adjustment)”
- 2.0
-
F
: “Hue (White Balance Adjustment)”
•
HI
: The slider moves. The effect can be adjusted while confirming the results on the monitor.
•
To turn off the effects of the creative slider, select
P
and press the k button.
3
When adjust
m
ent is co
m
plete, select
y
and press the
k
button.
•
If the k
button (except when
P
is selected) or the shutter-release button is pressed in step 2, the selected amount of effect is applied. When the effect is applied, the camera returns to the shooting screen.
Exit
C
Creative Slider Settings
The settings for Brightness (Exp. +/-), Vividness and Hue are saved in the camera’s memory even after the camera is turned off.
Brightness (Exposure Compensation)
Adjust the overall brightness of the image.
•
To brighten the image, set a positive (+) value.
•
To darken the image, set a negative (–) value.
Brightness (Exp. +/-)
Slider
+ 2.0
+ 0.3
- 2.0
Histogra m
E x posure co m pensation value
C
Using the Histogram
A histogram is a graph showing the distribution of tones in the image. Use as a guide when using exposure compensation and shooting without the flash.
•
The horizontal axis corresponds to pixel brightness, with dark tones to the left and bright tones to the right. The vertical axis shows the number of pixels.
•
Increasing exposure compensation shifts tone distribution to the right, and decreasing it shifts tone distribution to the left.
47
48
Vividness (Saturation Adjustment)
Adjust the overall vividness of the image.
•
The overall image vividness increases as the slider is moved up. The overall image vividness decreases as the slider is moved down.
Vividness
Slider
Hue (White Balance Adjustment)
Adjust the overall hue of the image.
•
The overall image becomes more reddish as the slider is moved up. The overall image becomes more bluish as the slider is moved down.
Hue
Slider
B
Notes About Hue Adjustment
This function may not be available to use in combination with other functions
(
Exposure Compensation (Adjusting
Brightness)
When the shooting mode is set to scene mode, special effects mode or short movie show mode, you can adjust the brightness (exposure compensation).
1
Press the
m
ulti selector
K
(
o
).
2
Select a co
m
pensation value and press the
k
button.
•
To brighten the image, set a positive (+) value.
•
To darken the image, set a negative (–) value.
•
The compensation value is applied, even without pressing the k
button.
Exposure compensation
Histogra m
+ 2.0
+ 0.3
-2.0
C
Exposure Compensation Value
The setting may not be available with some shooting modes (
49
50
Default Settings (Flash, Self-timer, Etc.)
Default settings for each shooting mode are listed below.
Flash
A
(auto) x
(scene auto selector)
X
(night landscape)
W
(backlighting) y b
(portrait) c
(landscape)
N
(ti m e-lapse m ovie)
U
U
W
4
X
/
W
V
W
W
4
4
2
5 d
(sports)
S
(night portrait) f
(part y /indoor) h
(sunset) i
(dusk/dawn)
W
4
V
4
V
7
U Z
(beach) z
(snow) k
(close-up) u
(food) W
4 m
(fireworks show) W
4 p
(eas y panora m a)
W
4
U
W
4
W
4
W
O
(pet portrait) W
4 u
(special effects)
W
F
(s m art portrait)
U
9 n
(short m ovie show)
W
4 k k k k
4 k k k k k k k k k
4 k
4
Y
8 k k
10 k
Self-ti m er
(
k
(
Macro
k
k k k k
3 k
4 k
4 k
4 k
4 k
4 k
4 k
4 k
4 k
4 k
4 k
4 k
4 o
4 o
4 k
4 k
4 k k k
4 k
0.0
–
11
0.0
E x posure co m pensation
(
–
1
0.0
0.0
0.0
0.0
0.0
0.0
6
0.0
0.0
0.0
0.0
0.0
0.0
4
0.0
0.0
0.0
0.0
0.0
0.0
3
4
5
6
7
8
1
2
9
10
11
Creative slider is displayed (
The camera automatically selects the flash mode appropriate for the scene it has selected.
W
(off) can be selected manually.
Cannot be changed. The camera enters macro mode when i
is selected.
Cannot be changed.
Flash is fixed at
X
(fill flash) when
HDR
is set to
Off
, and is fixed at
W
(off) when
HDR
is set to
On
.
Cannot be changed when Night sky or Star trails is used.
Slow sync with red-eye reduction flash mode may be used.
Self-timer cannot be used. Pet portrait auto release can be set to o
or k
Cannot be used when
Blink proof
is set to
On
.
Other than self-timer, a
n
also used.
Glamour retouch is displayed (
51
52
Focusing
The focus area varies depending on the shooting mode.
Using Target Finding AF
When
AF area mode
A
(auto) mode is set to
Target finding AF
, the camera focuses in the manner described below when you press the shutter-release button halfway.
•
The camera detects the main subject and focuses on it. When the subject is in focus, the focus area is displayed in green. If a human face is detected, the camera automatically sets focus priority on it.
Focus areas
•
If no main subject is detected, the camera automatically selects one or more of the 9 focus areas containing the subject closest to the camera. When the subject is in focus, the focus areas that are in focus are displayed in green.
Focus areas
B
Notes About Target Finding AF
•
Depending on shooting conditions, the subject that the camera determines to be the main subject may vary.
•
The main subject may not be detected when using certain
White balance
settings.
•
The camera may not detect the main subject appropriately in the following situations:
- When the subject is very dark or bright
- When the main subject lacks clearly defined colors
- When the shot is framed so that the main subject is at the edge of the monitor
- When the main subject is composed of a repeating pattern
Using Face Detection
In the following shooting modes, the camera uses face detection to automatically focus on human faces.
•
x
•
Portrait
or
Night portrait
scene mode
(
•
•
When
AF area mode
(
A
(auto) mode (
Face priority
If the camera detects more than one face, a double border is displayed around the face that the camera focuses on, and single borders are displayed around the other faces.
If the shutter button is pressed halfway when no faces are detected:
•
In x
(scene auto selector) mode, the focus area changes depending on the scene.
•
In
Portrait
and
Night portrait
scene modes or in smart portrait mode, the camera focuses in the center of the frame.
•
In
A
(auto) mode, the camera selects the focus area containing the subject closest to the camera.
B
Notes About Face Detection
•
The camera’s ability to detect faces depends on a variety of factors, including the direction in which the faces are looking.
•
The camera cannot detect faces in the following situations:
- When faces are partially hidden by sunglasses or otherwise obstructed
- When faces take up too much or too little of the frame
53
54
Using Skin Softening
When the shutter is released while using one of the shooting modes listed below, the camera detects human faces and processes the image to soften facial skin tones (up to 3 faces).
•
- The skin softening level can be adjusted by the glamour retouch function.
•
x
•
Portrait
or
Night portrait
Editing functions such as
Skin softening
can be applied to saved images by using
Glamour retouch
B
Notes About Skin Softening
•
It may take more time than usual to save images after shooting.
•
Under some shooting conditions, the desired skin softening results may not be achieved, and skin softening may be applied to areas of the image where there are no faces.
Subjects Not Suitable for Autofocus
The camera may not focus as expected in the following situations. In rare cases, the subject may not be in focus despite the fact that the focus area or the focus indicator is displayed in green:
•
Subject is very dark
•
Objects of sharply differing brightness are included in the scene (e.g. the sun behind the subject makes that subject appear very dark)
•
No contrast between the subject and surroundings (e.g. a portrait subject wearing a white shirt is standing in front of a white wall)
•
Several objects are at different distances from the camera (e.g. the subject is inside a cage)
•
Subjects with repeating patterns (window blinds, buildings with multiple rows of similarly shaped windows, etc.)
•
Subject is moving rapidly
In the situations noted above, try pressing the shutter-release button halfway to refocus several times, or focus on another subject positioned at the same distance from the camera as the actual desired subject, and use focus lock
(
Focus Lock
Focus lock shooting is recommended when the camera does not activate the focus area that contains the desired subject.
1
Set
AF area mode
to
Center
in
A
(auto)
m
ode (
85).
2
Position the subject in the center of the fra
m
e and press the shutter-release button halfwa
y
.
•
The camera focuses on the subject and the focus area is displayed in green.
•
Exposure is also locked.
3
Without lifting
y
our finger, reco
m
pose the picture.
•
Make sure to maintain the same distance between the camera and the subject.
4
Press the shutter-release button the rest of the wa
y
down to take the picture.
55
56
Functions That Cannot Be Used
Simultaneously When Shooting
Some functions cannot be used with other menu options.
Restricted function
Flash m ode
Self-ti m er
Macro m ode
I m age m ode
White balance
Continuous
Option
Continuous (
Blink proof (
AF area mode (
AF area mode (
Continuous (
Hue of creative slider
(
Self-timer (
Description
When a setting other than
Single
is selected, the flash cannot be used.
When
Blink proof
is set to
On
, the flash cannot be used.
When
Subject tracking
is selected, the self-timer cannot be used.
When
Subject tracking
is selected, macro mode cannot be used.
Image mode
is set as follows depending on the continuous shooting setting:
•
Pre-shooting cache
: q
1600×1200
•
Continuous H: 120 fps
:
O
640×480
•
Continuous H: 60 fps
:
M
(image size: 1280 × 960 pixels)
When the hue is adjusted using the creative slider, the
White balance
in the shooting menu cannot be specified. To specify
White balance
, select
P
in the setting screen of the creative slider and reset the settings of brightness, vividness, and hue.
If the self-timer is used when
Preshooting cache
is selected, the setting is fixed at
Single
.
Restricted function
ISO sensitivit
AF area
Date sta m ode
Self-Collage
Blink proof m
Digital zoo p m y
Shutter sound
Option
Continuous (
White balance (
Blink proof (
Self-Collage (
Continuous (
Continuous (
Description
When
Pre-shooting cache
,
Continuous H: 120 fps
, or
Continuous H: 60 fps
is selected,
ISO sensitivity
is fixed at
Auto
.
When a setting other than
Auto
is selected for
White balance
in
Target finding AF
mode, the camera does not detect the main subject.
When
Blink proof
is set to
On
,
Self-Collage
cannot be used.
When
Self-Collage
is set,
Blink proof
cannot be used.
When
Pre-shooting cache
,
Continuous H: 120 fps
, or
Continuous H: 60 fps
is selected, date and time cannot be stamped on images.
When
Subject tracking
is selected, digital zoom cannot be used.
When a setting other than
Single
is selected, the shutter sound is disabled.
B
Notes About Digital Zoom
•
Depending on the shooting mode or the current settings, digital zoom may not be available (
•
When digital zoom is in effect, the camera focuses in the center of the frame.
57
58
Playback Features
Playback Zoom
Moving the zoom control toward g
( i
playback zoom) in full-frame playback mode (
Displa y ed area guide
0004. JPG
15/11/2015 15:30
Full-fra m e Pla y back I m age is zoo m ed in.
•
You can change the magnification rate by moving the zoom control toward f
( h
) or g
( i
).
•
To view a different area of the image, press the multi selector
HIJK
.
•
When a zoomed image is displayed, press the k
button to return to fullframe playback mode.
C
Cropping Images
When a zoomed image is displayed, you can press the d
button to crop the image to include only the visible portion and save it as a separate file (
Thumbnail Playback/Calendar Display
Moving the zoom control toward f
( h
thumbnail playback) in full-frame
16) displays images as thumbnails.
Sun
11
88
Mon
22
99
Tue
2015
Wed
11
Thu
33 44 55
Fr i
66
Sat
77
44
0004. JPG
15/11/2015 15:30
Full-fra m e Pla y back Thu m bnail Pla y back Calendar Displa y
•
You can change the number of thumbnails displayed by moving the zoom control toward f
( h
) or g
( i
).
•
While using thumbnail playback mode, press the multi selector
HIJK
to select an image and then press the k
button to display that image in fullframe playback mode.
•
While using calendar display mode, press
HIJK
to select a date and then press the k
button to display the images captured on that day.
B
Notes About Calendar Display
Images captured when the camera’s date is not set are treated as images captured on January 1, 2015.
59
60
List by Date Mode
Press the c
button (pla y back m ode)
M d
button
M N m enu icon
M C
List b y date
M k
button
Use the multi selector
HI
to select a date and then press the k
button to play back the images captured on the selected date.
•
Functions in the playback menu (
be used for the images in the selected shooting date (except
Copy
).
•
The following operations are available while the shooting date selection screen is
List by date
30/11/2015
25/11/2015
20/11/2015
15/11/2015
3
2
11
4 displayed.
d
button: The functions listed below are available.
•
Slide show
•
Protect*
* The same setting can be applied to all images captured on the selected date.
l
button: Deletes all images captured on the selected date.
B
Notes About List by Date Mode
•
Up to the most recent 29 dates can be selected. If images exist for more than 29 dates, all images saved earlier than the most recent 29 dates will be combined under
Others
.
•
The 9,000 most recent images can be displayed.
•
Images captured when the camera’s date is not set are treated as images captured on January 1, 2015.
Viewing and Deleting Images Captured
Continuously (Sequence)
Viewing Images in a Sequence
Images captured continuously or with the self-collage function are saved as a sequence.
The first image of a sequence is used as the key picture to represent the sequence when displayed in full-frame playback mode or thumbnail playback mode. For the self-collage function, a collage image is used as the key picture.
To display each image in the sequence individually, press the k
button.
0004. JPG
15/11/2015 15:30
After pressing the k
button, the operations listed below are available.
•
To display the previous or next image, press the multi selector
JK
.
•
To display images that are not included in the sequence, press
H
to return to the key picture display.
•
To display images in a sequence as thumbnails, or to play them back in a slide
Back show, set
Sequence display options
to
Individual pictures
in the playback menu (
B
Sequence Display Options
Images captured continuously with cameras other than this camera cannot be displayed as a sequence.
C
Playback Menu Options Available When Using Sequence
•
When images in a sequence are displayed in full-frame playback mode, press the d
button to select functions in playback menu (
•
If you press the d
button when a key picture is displayed, the following settings can be applied to all images in the sequence:
- Mark for Wi-Fi upload, Protect, Copy
61
62
Deleting Images in a Sequence
When the l
(delete) button is pressed for images in a sequence, the images that are deleted vary depending on how the sequences are displayed.
•
When the key picture is displayed:
-
Current image
: All images in the displayed sequence are deleted.
-
Erase selected images
: When a key picture is selected on the erase selected images screen (
in that sequence are deleted.
-
All images
: All images on the memory card or in the internal memory are deleted.
•
When images in a sequence are displayed in full-frame playback mode:
-
Current image
:
-
Entire sequence
:
The image currently displayed is deleted.
-
Erase selected images
: Images that are selected in the sequence are deleted.
All images in the displayed sequence are deleted.
Editing Images (Still Images)
Before Editing Images
You can easily edit images on this camera. Edited copies are saved as separate files.
Edited copies are saved with the same shooting date and time as the original.
C
Restrictions on Image Editing
•
An image can be edited up to 10 times. Additionally, still images created by movie editing can be edited up to 9 times.
•
You may not be able to edit images of a certain size or with certain editing functions.
Quick Effects: Changing Hue or Mood
Images can be processed with a variety of effects.
Select
Painting
,
Photo illustration
,
Soft portrait
,
Portrait (color + B&W)
,
Fisheye
,
Cross screen
or
Miniature effect
.
1
Displa
y
the i
m
age to which
y
ou want to appl
y
an effect in fullfra
m
e pla
y
back
m
ode and press the
k
button.
0004. JPG
15/11/2015 15:30
2
Use the
m
ulti selector
HIJK
to select the desired effect and press the
k
button.
•
g
( i
) to switch to full-frame playback or f
( h
) to switch to thumbnail playback.
•
To exit without saving the edited image, press the d
button.
3
Select
Yes
and press the
k
button.
•
An edited copy is created.
Quick effects
Painting Photo illustration
Soft portrait
Portrait
(color + B&W)
Cancel
Fisheye Cross screen
Check
63
64
Quick Retouch: Enhancing Contrast and Saturation
Press the c
button (pla y back m ode)
M
select an i m age
M d
button
M
Quick retouch
M k
button
Use the
m
ulti selector
HI
to select the a
m
ount of effect applied and press the
k
button.
•
The edited version is displayed on the right.
•
To exit without saving the copy, press
J
.
Quick retouch
Normal
Amount
D-Lighting: Enhancing Brightness and Contrast
Press the c
button (pla y back m ode)
M
select an i m age
M d
button
M
D-Lighting
M k
button
Use the
m
ulti selector
HI
to select
OK
and press the
k
button.
•
The edited version is displayed on the right.
•
To exit without saving the copy, select
Cancel
and press the k
button.
D-Lighting
OK
Cancel
Red-eye Correction: Correcting Red-eye When
Shooting with the Flash
Press the c
button (pla y back m ode)
M
select an i m age
M d
button
M
Red-e y e correction
M k
button
Preview the result and press the
k
button.
•
To exit without saving the copy, press the multi selector
J
.
Red-eye correction
Back Save
B
Notes About Red-eye Correction
•
Red-eye correction can only be applied to images when red-eye is detected.
•
Red-eye correction can be applied to pets (dogs or cats) even if their eyes are not red.
•
Red-eye correction may not produce the desired results in some images.
•
In rare cases, red-eye correction may be applied unnecessarily to other areas of the image.
65
66
Glamour Retouch: Enhancing Human Faces
Press the c
button (pla y back m ode)
M
select an i m age
M d
button
M
Gla m our retouch
M k
button
1
Use the
m
ulti selector
HIJK
to select the face that
y
ou want to retouch and press the
k
button.
•
When only one face is detected, proceed to step 2.
Subject selection
Back
2
Use
JK
to select the effect, use
HI
to select the effect level, and press the
k
button.
Small face
3
2
•
You can simultaneously apply multiple effects.
1
Adjust or check the settings for all effects before pressing the k
button.
F
(Small face),
B
(Skin softening),
Back l
(Foundation makeup), m
(Glare reduction),
E
(Hide eye bags),
A
(Big eyes),
G
(Whiten eyes), n
(Eye shadow), o
(Mascara),
H
(Whiten teeth), p
(Lipstick),
D
(Redden cheeks)
•
Press the d
button to return to the screen for selecting a person.
3
Preview the result and press the
k
button.
•
To change the settings, press
J
to return to step 2.
•
To exit without saving the edited image, press the d
button.
Preview
Save
4
Select
Yes
and press the
k
button.
•
An edited copy is created.
Save OK?
Yes
No
B
Notes About Glamour Retouch
•
One face at a time can be edited. To use the glamour retouch function for another face, edit the edited image again.
•
Depending on the direction in which faces are looking, or the brightness of faces, the camera may be unable to accurately detect faces, or the glamour retouch function may not perform as expected.
•
If no faces are detected, a warning is displayed and the screen returns to the playback menu.
•
The glamour retouch function is available only for images captured at an ISO sensitivity of 1600 or lower, and the image size of 640 × 480 or larger.
Small Picture: Reducing the Size of an Image
Press the c
button (pla y back m ode)
M
select an i m age
M d
button
M
S m all picture
M k
button
1
Use the
m
ulti selector
HI
to select the desired cop
y
size and press the
k
button.
•
Images captured at an image mode setting of l
4608×2592
are saved at a size of 640 ×
360, and images captured at an image mode setting of s
3456×3456
are saved at 480 ×
480. Press the k
button to proceed to step 2.
2
Select
Yes
and press the
k
button.
•
An edited copy is created (compression ratio of approximately 1:8).
Small picture
640×480
320×240
160×120
Create small picture file?
Yes
No
67
68
Crop: Creating a Cropped Copy
1
Move the zoo
m
control to enlarge the i
m
age (
58).
2
Adjust the i
m
age so that onl
y
the portion that
y
ou want to keep is displa
y
ed, and then press the
d
(
m
enu) button.
•
Move the zoom control toward g
( i
) or f
( h
) to adjust the magnification rate.
Set a magnification rate at which u
is displayed.
•
Use the multi selector
HIJK
to scroll to the portion of the image that you want to display.
3
Preview the i
m
age and press the
k
button.
•
To change the portion that you want to keep, press
J
to return to step 2.
•
To exit without saving the cropped image, press the d
button.
Trim
Back Save
4
Select
Yes
and press the
k
button.
•
An edited copy is created.
Save this image as displayed?
Yes
No
C
Image Size
•
The aspect ratio (horizontal to vertical) of a cropped image is the same as that of the original image.
•
When the image size of the cropped copy is 320 × 240 or smaller, the image is displayed at a smaller size during playback.
Recording and Playing Back
Movies
1
Displa
y
the shooting screen.
•
Check the remaining amount of movie recording time.
Re m aining m ovie recording ti m e
2
Press the
b
(
e m
ovie-record) button to start
m
ovie recording.
•
The camera focuses in the center of the frame.
•
Press the multi selector
K
to pause recording, and press
K
again to resume recording (except when an HS movie option is selected in
Movie options
).
Recording automatically ends if it remains paused for about five minutes.
•
You can capture a still image by pressing the shutter-release button while recording
3
Press the
b
(
e
) button again to end recording.
4
Select a
m
ovie in full-fra
m
e pla
y
back
m
ode and press the
k
button to pla
y
it back.
•
An image with a movie options icon is a movie.
0010. MOV
15/11/2015 15:30
Movie options
69
70
Area Captured in Movies
•
The area that is captured in a movie varies depending on the
Movie options
or
Movie VR
settings in the movie menu.
•
If
Photo info
in
Monitor settings
108) in the setup menu is set to
Movie frame+auto info
, you can confirm the area that will be captured in a movie before you start recording.
Maximum Movie Recording Time
Individual movie files cannot exceed 4 GB in size or 29 minutes in length, even when there is sufficient free space on the memory card for longer recording.
•
The remaining recording time for a single movie is displayed on the shooting screen.
•
The actual remaining recording time may vary depending on the movie content, subject movement, or type of memory card.
•
Memory cards with an SD Speed Class rating of 6 or faster are recommended when recording movies (
153). Movie recording may stop
unexpectedly when memory cards with a lower Speed Class rating are used.
•
When using the camera’s internal memory, saving movies may take some time.
•
Depending on the file size of a movie, it may not be possible to save the movie in the internal memory or copy it from a memory card to the internal memory.
B
Notes About Camera Temperature
•
The camera may become hot when shooting movies for an extended period of time or when the camera is used in a hot area.
•
If the inside of the camera becomes extremely hot when recording movies, the camera will automatically stop recording.
The amount of time remaining until the camera stops recording (
B
10s) is displayed.
After the camera stops recording, it turns itself off.
Leave the camera off until the inside of the camera has cooled.
Notes About Movie Recording
B
Notes About Saving Images or Movies
The indicator showing the number of exposures remaining or the indicator showing the remaining recording time flashes while images or movies are being saved.
Do not open the battery-chamber/memory card slot cover or remove the battery or memory card
while an indicator is flashing. Doing this could result in loss of data, or in damage to the camera or the memory card.
B
Notes About Recorded Movies
•
There may be some degradation in image quality when digital zoom is used.
•
The sounds of zoom control operation, zoom, autofocus lens drive movement, movie vibration reduction, and aperture operation when brightness changes may be recorded.
•
The following phenomena may be seen in the monitor while recording movies.
These phenomena are saved in the recorded movies.
- Banding may occur in images under fluorescent, mercury-vapor, or sodiumvapor lighting.
- Subjects that move quickly from one side of the frame to the other, such as a moving train or car, may appear skewed.
- The entire movie image may be skewed when the camera is panned.
- Lighting or other bright areas may leave residual images when the camera is moved.
•
Depending on the distance to the subject or the amount of zoom applied, colored stripes may appear on subjects with repeating patterns (fabrics, lattice windows, etc.) during movie recording and playback. This occurs when the pattern in the subject and the layout of the image sensor interfere with each other; it is not a malfunction.
B
Notes About Vibration Reduction During Movie Recording
•
When
Movie VR
102) in the movie menu is set to
On (hybrid)
, the angle of view (i.e., the area visible in the frame) becomes narrower during movie recording.
•
When using a tripod to stabilize the camera during shooting, set
Movie VR
to
Off
to prevent potential errors caused by this function.
B
Notes About Autofocus for Movie Recording
Autofocus may not perform as expected (
54). Should this occur, try the following:
1. Set
Autofocus mode
in the movie menu to
Single AF
(default setting) before starting movie recording.
2. Frame another subject (positioned at the same distance from the camera as the intended subject) in the center of the frame, press the b
( e
) button to start recording, and modify the composition.
71
72
Capturing Still Images While Recording
Movies
If the shutter-release button is pressed all the way while recording a movie, one frame is saved as a still image. Movie recording continues while the still image is being saved.
•
While
Q
is displayed in the monitor, still images can be captured. While z
is displayed, still images cannot be captured.
•
The size of the captured image varies depending on the
Movie options
setting
(
B
Notes About Capturing Still Images During Movie Recording
•
Still images cannot be captured during a movie recording in the following situations:
- When the remaining movie recording time is less than 5 seconds
- When
Movie options
is set to
Z
1080/60i
,
U
1080/50i
, g
480/30p
,
W
480/25p
, or HS movie
•
The sound of pressing the shutter-release button may be recorded in the movie.
•
If the camera moves when the shutter-release button is pressed, the image may be blurred.
Operations During Movie Playback
To adjust the volume, move the zoom control
Volu m e indicator
Playback controls are displayed in the monitor.
The operations described below can be performed by using the multi selector
JK
to select a control and then pressing the k button.
When paused
Function Icon
Rewind
Advance
Description
A
Hold down the k
button to rewind the movie.
B
Hold down the k
button to advance the movie.
Pause playback. The operations listed below can be performed while paused.
Pause
E
C
D
Rewind the movie one frame. Hold down the k button for continuous rewinding.
Advance the movie one frame. Hold down the k button for continuous advancing.
F
Resume playback.
End
I
Extract the desired portion of a movie and save it as a separate file.
H
Extract a single frame of a movie and save it as a still image.
G
Return to full-frame playback mode.
73
74
Editing Movies
When editing movies, use a sufficiently charged battery to prevent the camera from turning off during editing. When the battery level indicator is
B
, movie editing is not possible.
Extracting Only the Desired Portion of a Movie
The desired portion of a recorded movie can be saved as a separate file.
1
Pla
y
back a
m
ovie and pause at the start point of the portion that
y
ou want to e
x
tract (
73).
2
Use the
m
ulti selector
JK
to select
I
in the pla
y
back controls, and then press the
k
button.
3
Use
HI
to select
M
(choose start point) in the editing controls.
•
Use
JK
to move the start point.
•
To cancel editing, select
O
(return), and press the k
button.
4
Use
HI
to select
N
(choose end point).
•
Use
JK
to move the end point.
•
To preview the specified portion, select
G and then press the k
button. Press the k button again to stop previewing.
Choose start point
Choose end point
5
Use
HI
to select
m
(save) and press the
k
button.
•
Follow the instructions on the screen to save the movie.
Save
B
Notes About Movie Editing
•
A movie that was created by editing cannot be trimmed again.
•
The actual trimmed portion of a movie may differ slightly from the portion selected using the start and end points.
•
Movies cannot be trimmed so that they are less than two seconds long.
Saving a Frame from a Movie as a Still Image
The desired frame of a recorded movie can be extracted and saved as a still image.
•
Pause a movie and display the frame to be
•
Use the multi selector
JK
to select the
H control and press the k
button.
•
Select
Yes
when a confirmation dialog is displayed, and press the k
button to save the image.
•
The image quality of the saved still image is normal (compression ratio of approximately
1:8). The image size is determined by the type
For example, a still image saved from a movie recorded with e
1080/30p
or
S
1080/25p
is n
(1920 × 1080 pixels).
Copy this frame as a still image?
Yes
No
B
Notes About Saving Still Images
Frames of HS movies and movies recorded with
Z
1080/60i
,
U
1080/50i
, g
480/30p
, or
W
480/25p
98) cannot be saved as still images.
75
76
Using Menus
You can set the menus listed below by pressing the d
(menu) button.
•
A
,
x
,
y
,
X
,
W
,
u
,
F
,
n
Shooting menu
Available by pressing the d
button when the shooting screen is displayed.
Allows you to change image size and quality, continuous shooting settings, etc.
Menu icons and setting items vary depending on the shooting mode.
•
G
Playback menu/
C
List by date menu
Available by pressing the d
button when viewing images in full-frame playback mode or thumbnail playback mode.
Allows you to edit images, play slide shows, etc.
•
D
Movie menu
Available by pressing the d
button when the shooting screen is displayed.
Allows you to change movie recording settings.
•
J
Wi-Fi options menu
Allows you to configure Wi-Fi settings for connecting the camera and a smart device.
•
z
Setup menu
Allows you to adjust basic camera functions such as date and time, display language, etc.
1
Press the
d
(
m
enu) button.
•
The menu is displayed.
2
Press the
m
ulti selector
J
.
•
The current menu icon is displayed in yellow.
Shooting menu
Image mode
White balance
Continuous
ISO sensitivity
AF area mode
Autofocus mode
Menu icons
3
Select a
m
enu icon and press the
k
button.
•
The menu options become selectable.
Set up
Time zone and date
Monitor settings
Date stamp
Photo VR
AF assist
Digital zoom
4
Select a
m
enu option and press the
k
button.
•
Certain menu options cannot be set depending on the current shooting mode or the state of the camera.
Time zone and date
Monitor settings
Date stamp
Photo VR
AF assist
Digital zoom
5
Select a setting and press the
k
button.
Date stamp
•
The setting you selected is applied.
•
When you are finished
Date
Date and time
Off using the menu, press the d
button.
•
When a menu is displayed, you can switch to shooting mode by pressing the shutter-release button or b
( e
) button.
77
78
The Shooting Menu (The Common
Shooting Options)
Image Mode (Image Size and Quality)
Enter shooting m ode*
M d
button
M
I m age m ode
M k
button
* This setting can also be changed in shooting modes other than short movie show mode. The changed setting is also applied to other shooting modes (except
Time-lapse movie
and
Easy panorama
scene modes).
Select the combination of image size and compression ratio to be used when saving images.
The higher the image mode setting, the larger the size at which it can be printed, and the lower the compression ratio, the higher the quality of the images, but the number of images that can be saved is reduced.
Option*
Q
4608×3456
P
P
4608×3456 (default setting)
R
3264×2448 r
2272×1704 q
1600×1200
O
640×480 l
4608×2592 s
3456×3456
Co m pression ratio
Approx. 1:4
Approx. 1:8
Approx. 1:8
Approx. 1:8
Approx. 1:8
Approx. 1:8
Approx. 1:8
Approx. 1:8
Aspect ratio
(horizontal to vertical)
4:3
4:3
4:3
4:3
4:3
4:3
16:9
1:1
* The numerical values indicate the number of pixels that are captured.
Example:
P
4608×3456
= approx. 16 megapixels, 4608 × 3456 pixels
B
Notes About Printing Images at 1:1 Aspect Ratio
Change the printer setting to “Border” when printing images at a 1:1 aspect ratio.
Some printers may not be able to print images at a 1:1 aspect ratio.
B
Notes About Image Mode
This function may not be available to use in combination with other functions
(
C
Number of Images That Can Be Saved
•
The approximate number of images that can be saved can be checked in the
•
Note that due to JPEG compression, the number of images that can be saved may vary greatly depending on the image content, even when using memory cards with the same capacity and the same image mode setting. In addition, the number of images that can be saved may vary depending on the make of the memory card.
•
If the number of exposures remaining is 10,000 or more, the number of exposures remaining display shows “9999”.
79
80
The Shooting Menu (for
A
(Auto) Mode)
•
See “Image Mode (Image Size and Quality)” (
Image mode
.
White Balance (Adjusting Hue)
Rotate the m ode dial to
A M d
button
M A m enu icon
M
White balance
M k
button
Adjust white balance to suit the light source or weather conditions in order to make the colors in images match what you see with your eyes.
Description Option a
Auto
(default setting)
White balance is automatically adjusted.
b
Preset m anual c
Da y light d
Incandescent e
Fluorescent f
Cloud y g
Flash
Use when the desired result is not achieved with
Auto
,
Incandescent
, etc. (
Use under direct sunlight.
Use under incandescent lighting.
Use under fluorescent lighting.
Use under overcast skies.
Use with the flash.
B
Notes About White Balance
•
Set the flash to
W
(off) when white balance is set to any setting other than
Auto
and
Flash
•
This function may not be available to use in combination with other functions
Using Preset Manual
Use the procedure below to measure the white balance value under the lighting used during shooting.
1
Place a white or gra
y
reference object under the lighting that will be used during shooting.
2
Use the
m
ulti selector
HI
to select
Preset manual
in the
White balance
m
enu, and press the
k
button.
•
The camera zooms in to the position for measuring white balance.
White balance
Preset manual
3
Select
Measure
.
•
To apply the last measured value, select
Cancel
and press the k
button.
Preset manual
4
Fra
m
e the white or gra
y
reference object in the
m
easuring window, and press the
k
button to
m
easure the value.
•
The shutter is released and measurement is complete (no image is saved).
Cancel
Measure
Preset manual
Cancel
Measure
Measuring window
B
Notes About Preset Manual
A value for flash lighting cannot be measured with
Preset manual
. When shooting using the flash, set
White balance
to
Auto
or
Flash
.
81
82
Continuous Shooting
Rotate the m ode dial to
A M d
button
M A m enu icon
M
Continuous
M k
button
Option
U
Single
(default setting) k m q
Continuous H
Continuous L
Pre-shooting cache n
Continuous H:
120 fps j
Continuous H:
60 fps
Description
One image is captured each time the shutter-release button is pressed.
While the shutter-release button is held all the way down, images are captured continuously.
•
The frame rate for continuous shooting is about 7.9 fps and the maximum number of continuous shots is about
7 (when image mode is set to
P
4608×3456
).
While the shutter-release button is held all the way down, images are captured continuously.
•
The frame rate for continuous shooting is about 2 fps and the maximum number of continuous shots is about 7
(when image mode is set to
P
4608×3456
).
When the shutter-release button is pressed halfway, preshooting cache shooting begins. When the shutter-release button is pressed the rest of the way down, the camera saves the current image as well as the images captured immediately before the button is pressed (
function helps you to avoid missing the shot.
•
The frame rate for continuous shooting is about 15 fps and the maximum number of continuous shots is 25, including a maximum of 4 frames captured in the preshooting cache.
•
Image mode is fixed at q
1600×1200
.
Each time the shutter-release button is pressed all the way, images are captured at a high speed rate.
•
The frame rate for continuous shooting is about 120 fps and the maximum number of continuous shots is 50.
•
Image mode is fixed at
O
640×480
.
Each time the shutter-release button is pressed all the way, images are captured at a high speed rate.
•
The frame rate for continuous shooting is about 60 fps and the maximum number of continuous shots is 25.
•
Image mode is fixed at
M
(image size: 1280 × 960 pixels).
B
Notes About Continuous Shooting
•
Focus, exposure, and white balance are fixed at the values determined with the first image in each series.
•
It may take some time to save the images after shooting.
•
When ISO sensitivity increases, noise may appear in captured images.
•
The frame rate for continuous shooting may vary depending on the current image mode setting, the memory card used, or shooting condition.
•
When using
Pre-shooting cache
,
Continuous H: 120 fps
, or
Continuous H: 60 fps
, banding or variance in brightness or hue may occur in images that were captured under lighting that flickers at high speeds, such as fluorescent, mercuryvapor, or sodium-vapor lighting.
•
This function may not be available to use in combination with other functions
C
Pre-shooting Cache
When the shutter-release button is pressed halfway or all the way down, images are saved as described below.
Press down halfwa y Press down all the wa y
I m ages saved before pressing all the wa y I m ages saved b y pressing all the wa y
•
The pre-shooting cache icon (
Q
) on the shooting screen changes to green while the shutter-release button is pressed halfway.
83
84
ISO Sensitivity
Rotate the m ode dial to
A M d
button
M A m enu icon
M
ISO sensitivit y
M k
button
A higher ISO sensitivity allows darker subjects to be captured. Additionally, even with subjects of similar brightness, pictures can be taken at faster shutter speeds, and blurring caused by camera shake and subject movement can be reduced.
•
When a higher ISO sensitivity is set, images may contain noise.
Option a
Auto
(default setting)
I
Fi x ed range auto
Description
Sensitivity is automatically selected from the range of
ISO 125 to 1600.
Select the range in which the camera automatically adjusts ISO sensitivity, from
ISO 125-400
or
ISO 125-
800
.
125, 200, 400, 800, 1600,
3200, 6400
Sensitivity is locked at the specified value.
B
Notes About ISO Sensitivity
This function may not be available to use in combination with other functions
(
C
ISO Sensitivity Display on the Shooting Screen
•
When
Auto
is selected,
E
is displayed when the ISO sensitivity increases.
•
When
Fixed range auto
is selected, the maximum value for ISO sensitivity is displayed.
AF Area Mode
Rotate the m ode dial to
A M d
button
M A m enu icon
M
AF area m ode
M k
button
Set how the camera selects the focus area for autofocus.
Option Description
When the camera detects a human face, it focuses on that face.
more information.
Focus area a
Face priorit y x
Manual
When framing a composition with no human subjects or detected faces, the camera automatically selects one or more of the
9 focus areas containing the subject closest to the camera when the shutterrelease button is pressed halfway.
Use the multi selector
HIJK
to move the focus area to where you want to focus.
•
To use the multi selector to configure the flash mode or other settings, press the k button. To return to moving the focus area, press the k
button again.
Focus areas
Scope of m ovable focus area
Focus area
85
86
Option Description
The camera focuses on the subject in the center of the frame.
y
Center
Focus area s
Subject tracking
M
Target finding
AF (default setting)
Use this function to take pictures of moving subjects. Register the subject on which the camera focuses. The focus area automatically moves to track the subject. See
information.
When the camera detects the main subject, it focuses on that subject.
information.
Start
Focus areas
B
Notes About AF Area Mode
•
When digital zoom is in effect, the camera focuses in the center of the frame regardless of the
AF area mode
setting.
•
This function may not be available to use in combination with other functions
Using Subject Tracking
Rotate the m ode dial to
A M d
button
M A m enu icon
M
AF area m ode
M k
button
M s
Subject tracking
M k
button
M d
button
1
Register a subject.
•
Align the subject that you want to track with the border in the center of the monitor and press the k
button.
•
When the subject is registered, a yellow border (focus area) is displayed around it and the camera begins tracking the subject.
•
If the subject cannot be registered, the border is displayed in red. Change the
Start composition and try registering the subject again.
•
To cancel subject registration, press the k
button.
•
If the camera can no longer track the registered subject, the focus area disappears. Register the subject again.
2
Press the shutter-release button full
y
to take the picture.
•
If the shutter-release button is pressed while the focus area is not displayed, the camera focuses on the subject in the center of the frame.
B
Notes About Subject Tracking
•
If you perform operations such as zooming while the camera is tracking the subject, the registration is canceled.
•
Subject tracking may not be possible in certain shooting conditions.
87
88
Autofocus Mode
Rotate the m ode dial to
A M d
button
M A m enu icon
M
Autofocus m ode
M k
button
Set how the camera focuses when shooting still images.
Option
A
Single AF
B
Full-ti m e AF a
Pre-focus
(default setting)
Description
The camera focuses only when the shutter-release button is pressed halfway.
The camera continues focusing even when the shutter-release button is not pressed halfway. The sound of lens drive movement is heard while the camera focuses.
Even when the shutter-release button is not pressed halfway, the camera focuses automatically if the composition of the framed image is significantly changed.
C
Autofocus Mode for Short Movie Show Mode or Movie Recording
Autofocus mode for short movie show mode or movie recording can be set with
Autofocus mode
(
The Smart Portrait Menu
•
See “Image Mode (Image Size and Quality)” (
Image mode
.
Self-Collage
Rotate the m ode dial to
F M d
button
M F m enu icon
M
Self-Collage
M k
button
Option
Nu m ber of shots
Interval
Shutter sound
Description
Set the number of shots that the camera automatically captures (number of captured images for an aggregated image).
•
4
(default setting) or
9
can be selected.
Set the interval time between each shot.
•
Short
,
Medium
(default setting), or
Long
can be selected.
Set whether to activate the shutter sound when shooting with the self-collage function.
•
Standard
,
SLR
,
Magic
(default setting), or
Off
can be selected.
•
The same setting that is specified for
Shutter sound
in
Sound settings
in the setup menu is not applied to this setting.
89
90
Blink Proof
Rotate the m ode dial to
F M d
button
M F m enu icon
M
Blink proof
M k
button y
On
Option Description
The camera automatically releases the shutter twice with every shot and saves one image in which the subject’s eyes are open.
•
If the camera saved an image in which the
A blink was detected in the picture just taken.
subject’s eyes may have been closed, the dialog shown on the right is displayed for a few seconds.
Off (default setting) Turns the blink proof off.
B
Notes About Blink Proof
This function may not be available to use in combination with other functions
(
The Playback Menu
•
See “Editing Images (Still Images)” (
63) for information about image
editing functions.
Mark for Wi-Fi Upload
Press the c
button (pla y back m ode)
M d
button
M
Mark for Wi-Fi upload
M k
button
Select still images in the camera that you want to transfer to a smart device in advance before transferring them. Movies cannot be selected.
On the image selection screen (
96), select or deselect images for the
Mark for Wi-Fi upload
function.
Note that when you select
Reset all
Restore default settings
(
104) in the Wi-Fi options menu, the
Mark for Wi-Fi upload
settings that you made are canceled.
91
92
Slide Show
Press the c
button (pla y back m ode)
M d
button
M
Slide show
M k button
Play back images one by one in an automated “slide show.” When movie files are played back in the slide show, only the first frame of each movie is displayed.
1
Use the
m
ulti selector
HI
to select
Start
and press the
k
Slide show
button.
Start
•
The slide show begins.
•
To change the interval between images, select
Frame intvl
, press the k
button, and specify the desired interval time before
Frame intvl
Loop
Pause selecting
Start
.
•
To repeat the slide show automatically, select
Loop
and press the k
button before selecting
Start
.
•
The maximum playback time is up to about 30 minutes even if
Loop
is enabled.
2
End or restart the slide show.
•
The screen shown on the right is displayed after the slide show ends or is paused. To exit the show, select
G
and then press the k
button. To resume the slide show, select
F
and then press the k
button.
Operations During Playback
•
Use the multi selector
JK
to display the previous/next image. Press and hold to rewind/fast forward.
•
Press the k
button to pause or end the slide show.
Protect
Press the c
button (pla y back m ode)
M d
button
M
Protect
M k button
The camera protects selected images from accidental deletion.
Select images to protect or cancel protection from the image selection screen
(
Note that formatting the memory card or the camera’s internal memory permanently deletes all data including protected files (
Rotate Image
Press the c
button (pla y back m ode)
M d
button
M
Rotate i m age
M k
button
Specify the orientation in which saved images are displayed during playback.
Still images can be rotated 90 degrees clockwise or 90 degrees counterclockwise.
Select an image from the image selection screen (
image screen is displayed, press the multi selector
JK
to rotate the image 90 degrees.
Rotate image Rotate image Rotate image
Back Rotate
Rotate 90 degrees counterclockwise
Back Rotate Back Rotate
Rotate 90 degrees clockwise
Press the k
button to finalize display orientation, and save orientation information with the image.
93
Copy (Copy Between the Memory Card and
Internal Memory)
Press the c
button (pla y back m ode)
M d
button
M
Cop y
M k button
Images can be copied between a memory card and the internal memory.
•
When a memory card that contains no images is inserted and the camera is switched to playback mode,
Memory contains no images.
is displayed. In that case, press the d
button to select
Copy
.
1
Use the
m
ulti selector
HI
to select a destination option to which i
m
ages are copied and press the
k
button.
Copy
Camera to card
Card to camera
2
Select a cop
y
option and press the
k
button.
•
When you choose
Selected images
, use the image selection screen to specify images
(
Camera to card
Selected images
All images
94
B
Notes About Copying Images
•
Only files in formats that this camera can record can be copied.
•
Operation is not guaranteed with images captured with another make of camera or that have been modified on a computer.
C
Copying Images in a Sequence
•
If you select a key picture of a sequence in
Selected images
, all images in the sequence are copied.
•
If you press the d
button while images in a sequence are displayed, only the
Card to camera
copy option is available. All images in the sequence are copied if you select
Current sequence
.
Sequence Display Options
Press the c
button (pla y back m ode)
M d
button
M
Sequence displa y options
M k button
Select the method used to display images in the sequence (
Option
Q
Individual pictures
C
Ke y picture onl y
(default setting)
Description
Displays each image in a sequence individually.
F is displayed on the playback screen.
Displays only the key picture for images in a sequence.
The setting is applied to all sequences and saved in the camera’s memory even if the camera is turned off.
95
96
The Image Selection Screen
When an image selection screen such as the one shown on the right is displayed while operating the camera, follow the procedures described below to select the images.
Protect
1
Use the
m
ulti selector
JK
to select an i
m
age.
•
g
( i
) to switch to full-frame playback or f
( h
) to switch to thumbnail playback.
•
Only one image can be selected for
Rotate image
. Proceed to step 3.
2
Use
HI
to select or deselect.
•
When an image is selected, an icon is displayed below the image. Repeat steps 1 and 2 to select additional images.
Back
Protect
Back
Protect
Back
3
Press the
k
button to appl
y
i
m
age selection.
•
When a confirmation dialog is displayed, follow the on-screen instructions to operate.
The Movie Menu
Movie Options
Enter shooting m ode
M d
button
M D m enu icon
M
Movie options
M k
button
Select the desired movie option to record. Select normal speed movie options
to record at normal speed, or HS movie options (
motion. The movie options that can be selected vary depending on the
Frame rate
setting (
•
Memory cards with an SD Speed Class rating of 6 or faster are recommended
Normal Speed Movie Options
Option
(I m age size/Fra m e rate
1
, File for m at) e
1080/30p
S
1080/25p
(default setting)
Z
1080/60i
1, 2
U
1080/50i
1, 2 f
720/30p
V
720/25p g
480/30p
W
480/25p
I m age size
1920 × 1080
1920 × 1080
1280 × 720
640 × 480
Aspect ratio (horizontal to vertical)
16:9
16:9
16:9
4:3
1
2
Interlaced format uses Fields per second.
The setting is not available when using certain effects in special effects mode or glamour retouch function.
97
98
HS Movie Options
Recorded movies are played back in fast or slow motion.
See “Recording Movies in Slow Motion and Fast Motion (HS Movie)” (
Option
I m age size
Aspect ratio
(horizontal to vertical)
Description h a j
Y
HS 480/4×
1
HS 1080/0.5×
1
640 × 480
4:3
1920 × 1080
16:9
1/4-speed slow motion movies
•
Max. recording time
2
: 10 seconds (playback time: 40 seconds)
2× speed fast motion movies
•
Max. recording time
2
: 2 minutes (playback time: 1 minute)
1
2
The setting is not available when using certain effects in special effects mode or glamour retouch function.
While recording movies, the camera can be switched between normal speed movie recording and slow motion or fast motion movie recording.
The maximum recording time shown here refers only to the portion of the movie that is recorded in slow motion or fast motion.
B
Notes About HS Movie
•
Sound is not recorded.
•
Zoom position and focus are locked when movie recording starts.
C
Playing Back in Slow Motion and Fast Motion
When recording at normal speed:
Recording ti m e
10 s
Pla y back ti m e
Pla y back ti m e
10 s
When recording at
h
HS 480/4×, or
a
HS 480/4×:
Movies are recorded at 4× normal speed.
They are played back in slow motion at 4× slower speed.
Recording ti m e
10 s
40 s
Slow m otion pla y back
When recording at
j
HS 1080/0.5×, or
Y
HS 1080/0.5×:
Movies are recorded at 1/2 normal speed.
They are played back in fast motion at 2× faster speed.
Recording ti m e
10 s
Pla y back ti m e
5 s
Fast m otion pla y back
99
100
Recording Movies in Slow Motion and Fast Motion (HS
Movie)
Enter shooting m ode
M d
button
M D m enu icon
M
Movie options
M k
button
Movies recorded using HS movie can be played back in slow motion at 1/4 of the normal playback speed, or in fast motion at twice the normal playback speed.
1
Use the
m
ulti selector
HI
to select an HS
m
ovie option (
98)
and press the
k
button.
•
After applying the option, press the d button to return to the shooting screen.
Movie options
1080/30p
1080/60i
720/30p
480/30p
HS 480/4×
HS 1080/0.5×
2
Press the
b
(
e m
ovie-record) button to start recording.
•
The camera switches between normal speed movie recording and HS movie recording each time the k
button is pressed.
•
The movie options icon changes when switching between HS movie recording and normal speed movie recording.
•
When the maximum recording time for HS movies (
98) is reached, the camera automatically switches to normal
speed movie recording.
3
Press the
b
(
e
) button to end recording.
Autofocus Mode
Enter shooting m ode
M d
button
M D m enu icon
M
Autofocus m ode
M k
button
Set how the camera focuses in short movie show mode or when recording movies.
Option
A
Single AF
(default setting)
Description
Focus is locked when movie recording starts.
Select this option when the distance between the camera and subject will remain fairly consistent during movie recording.
B
Full-ti m e AF
The camera focuses continuously during movie recording.
Select this option when the distance between the camera and subject will change significantly during recording. The sound of the camera focusing may be heard in the recorded movie. Use of
Single AF
is recommended to prevent the sound of the camera focusing from interfering with recording.
•
When an HS movie option is selected in
Movie options
, the setting is fixed at
Single AF
.
101
102
Movie VR
Enter shooting m ode
M d
button
M D m enu icon
M
Movie VR
M k button
Select the vibration reduction setting used in short movie show mode or when recording movies.
Select
Off
when using a tripod to stabilize the camera during shooting.
V
On (h y brid)
(default setting) g
On
Option Description
Performs optical compensation for camera shake using lens shift VR and simultaneously performs electronic VR using image processing. The angle of view (i.e., the area visible in the frame) becomes narrower.
Performs compensation for camera shake using lens shift VR.
Compensation is not performed.
Off
•
When an HS movie option is selected in
Movie options
, the setting is fixed at
Off
.
B
Notes About Movie VR
•
The effects of camera shake may not be completely eliminated in some situations.
•
In special effects mode, only lens shift VR is used to compensate for camera shake when
Movie options
is set to
Z
1080/60i
or
U
1080/50i
, even if
Movie
VR
is set to
On (hybrid)
.
Wind Noise Reduction
Enter shooting m ode
M d
button
M D m enu icon
M
Wind noise reduction
M k button
Y
On
Option Description
Reduces the sound that is produced when wind passes over the microphone during movie recording.
Other sounds may become difficult to hear during playback.
Wind noise reduction is disabled.
Off (default setting)
•
When an HS movie option is selected in
Movie options
, the setting is fixed at
Off
.
Frame Rate
Enter shooting m ode
M d
button
M D m enu icon
M
Fra m e rate
M k button
Select the frame rate (fields per second for the interlaced format) used in short movie show mode or when recording movies. When the frame rate setting is switched, options that can be set in
Movie options
Option
30 fps (30p/60i)
25 fps (25p/50i)
Description
Suited for playback on a TV using the NTSC standard.
Suited for playback on a TV using the PAL standard.
103
104
The Wi-Fi Options Menu
Press the d
button
M J m enu icon
M k
button
Configure the Wi-Fi (wireless LAN) settings to connect the camera and a smart device.
Option
Connect to s m art device
Upload fro m ca m era
Disable
Wi-Fi
Options
Description
Select when wirelessly connecting the camera and a smart device.
See “Connecting the Smart Device to the Camera” (
more information.
Select when wirelessly connecting the camera and a smart device.
See “Preselecting Images in the Camera That You Want to Transfer to a Smart Device” (
•
The images to transfer can be selected on the image selection screen before establishing a Wi-Fi connection (
SSID and password of the camera are displayed on the screen after images are selected.
Select to terminate the wireless connection between the camera
and a smart device. See “To Terminate the Wi-Fi Connection”
SSID
: Change the SSID. The SSID configured here is displayed on the smart device. Set a 1- to 24-character alphanumeric SSID.
Auth./encryp.
: Select whether or not to encrypt the communications between the camera and the connected smart device.
Communications are not encrypted when
Open
(default setting) is selected.
•
When
WPA2-PSK-AES
is set, the message for entering a password is displayed when the camera is connected to smart
Password
: Set the password. Set an 8- to 16-character alphanumeric password.
Channel
: Select the channel used for wireless connections.
Current settings
Restore default settings
Display the current settings.
Restore the Wi-Fi settings to their default values. The wireless connection is terminated if this option is performed while Wi-Fi is connected.
Operating the Text Input Keyboard
•
Use the multi selector
HIJK
to select alphanumeric characters. Press the k
button to enter the selected character in the text field and move the cursor to the next space.
•
To move the cursor in the text field, select
N or
O
on the keyboard, and press the k button.
•
To delete one character, press the l
button.
•
To apply the setting, select
P
on the keyboard and press the k
button.
SSID
Te x t field
Back
Ke y board
Delete
105
106
The Setup Menu
Time Zone and Date
Press the d
button
M z m enu icon
M
Ti m e zone and date
M k button
Set the camera clock.
Option
Date and ti m e
Date for m at
Ti m e zone
Description
•
Select a field: Press the multi selector
JK
.
•
Edit the date and time:
Press
HI
.
•
Apply the setting: Select the minute field setting and press the k
button.
Date and time
D M Y
15 11 2015 h m
15 30
Edit
Select
Year/Month/Day
,
Month/Day/Year
, or
Day/Month/
Year
.
Set time zone and daylight saving time.
•
When
Travel destination
( x
) is set after having set the home time zone ( w
), the time difference between the travel destination and the home time zone is automatically calculated, and the date and time are saved for the selected region.
Setting the Time Zone
1
Use the
m
ulti selector
HI
to select
Time zone
and press the
k
button.
Time zone and date
Date and time
Date format
Time zone
London, Casablanca
15/11/2015 15:30
2
Select
w
Home time zone
or
x
Travel destination
and press the
k
button.
•
The date and time displayed in the monitor changes depending on whether the home time zone or travel destination is selected.
3
Press
K
.
4
Use
JK
to select the ti
m
e zone.
•
Press
H
to enable daylight saving time function, and
W
is displayed. Press
I
to disable the daylight saving time function.
•
Press the k
button to apply the time zone.
•
If the correct time is not displayed for the home or travel destination time zone setting, set the appropriate time in
Date and time
.
Time zone
Home time zone
Travel destination
London, Casablanca
15/11/2015 15:30
Time zone
Home time zone
Travel destination
London, Casablanca
15/11/2015 15:30
New York, Toronto, Lima
10:30 –5:00
Back
107
108
Monitor Settings
Press the d
button
M z m enu icon
M
Monitor settings
M k
button
Option
Photo info
I m age review
Brightness
Description
Set whether or not to display information in the monitor.
Set whether or not to display the captured image immediately after shooting.
•
Default setting:
On
Adjust the brightness.
•
Default setting:
3
Photo Info
Shooting m ode Pla y back m ode
Show info
Auto info
(default setting)
0004. JPG
15/11/2015 15:30
The same information as shown in
Show info
is displayed, and it is hidden as shown in
Hide info
if no operations are performed for a few seconds. The information is displayed again when an operation is performed.
Hide info
Shooting m ode Pla y back m ode
Fra m ing grid+auto info
In addition to the information shown in
Auto info
, a framing grid is displayed to help frame pictures.
The framing grid is not displayed while recording movies.
0004. JPG
15/11/2015 15:30
Same as
Auto info
.
Movie fra m e+auto info
In addition to the information shown in
Auto info
, a frame is displayed before movie recording begins that represents the area that will be captured when recording movies.
The movie frame is not displayed while recording movies.
0004. JPG
15/11/2015 15:30
Same as
Auto info
.
109
110
Date Stamp
Press the d
button
M z m enu icon
M
Date sta m p
M k
button
The shooting date and time can be stamped on images when shooting.
Option f
Date
S
Date and ti m e
Off (default setting)
Description
Date is stamped on images.
Date and time are stamped on images.
Date and time are not stamped on images.
B
Notes About Date Stamp
•
Stamped dates form a permanent part of image data and cannot be deleted. The date and time cannot be stamped on images after they have been captured.
•
The date and time cannot be stamped in the following situations:
- When using
Night portrait
(when
Hand-held
is selected),
Night landscape
(when
Hand-held
is selected),
Backlighting
(when
HDR
is set), or
Easy panorama
scene mode
- When the continuous shooting setting (
Pre-shooting cache
,
Continuous H: 120 fps
, or
Continuous H: 60 fps
- When shooting movies
- When saving still images during moving recording
•
The stamped date and time may be difficult to read when using a small image size.
C
Printing a Shooting Date on Images Without a Date Stamp
You can transfer images to a computer and use the ViewNX 2 software (
imprint the shooting date on the images when they are printed.
Photo VR
Press the d
button
M z m enu icon
M
Photo VR
M k
button
Select the vibration reduction setting used when shooting still images.
Select
Off
when using a tripod to stabilize the camera during shooting.
Option g
On (default setting)
Off
Description
Compensation for camera shake is performed using lens shift VR.
Compensation is not performed.
B
Notes About Photo VR
•
After turning on the camera or after switching from playback mode to shooting mode, wait for the shooting mode screen to be displayed completely before taking pictures.
•
Images in the camera monitor may be displayed blurry immediately after shooting.
•
The effects of camera shake may not be completely eliminated in some situations.
AF Assist
Press the d
button
M z m enu icon
M
AF assist
M k
button a
Auto
(default setting)
Off
Option Description
The AF-assist illuminator automatically lights up when you press the shutter-release button under dim lighting. The illuminator has a range of about 2.0 m (6 ft 6 in.) at the maximum wide-angle position and about 2.0 m (6 ft 6 in.) at the maximum telephoto position.
•
Note that for some shooting modes or focus areas, the AF-assist illuminator may not light.
The AF-assist illuminator does not light.
111
112
Digital Zoom
Press the d
button
M z m enu icon
M
Digital zoo m
M k
button
Option
On (default setting)
Off
Description
Digital zoom is enabled.
Digital zoom is disabled.
B
Notes About Digital Zoom
•
Digital zoom cannot be used in the following shooting modes:
-
Portrait
,
Night portrait
,
Night landscape
,
Backlighting
(when
HDR
is set),
Easy panorama
, or
Pet portrait
scene mode
- Smart portrait mode
•
Digital zoom cannot be used in other shooting modes when using certain settings
Sound Settings
Press the d
button
M z m enu icon
M
Sound settings
M k
button
Option
Button sound
Shutter sound
Description
When
On
(default setting) is selected, the camera produces one beep when operations are performed, two beeps when focus is acquired on the subject, and three beeps when an error occurs. The welcome screen sound is also produced.
•
Sounds are disabled when using
Pet portrait
scene mode.
When
On
(default setting) is selected, the shutter sound is produced when the shutter is released.
•
The shutter sound is not produced when using continuous shooting mode, when recording movies, or when using
Pet portrait
scene mode.
Auto Off
Press the d
button
M z m enu icon
M
Auto off
M k
button
Set the amount of time that elapses before the camera enters standby mode
(
You can select
30 s
,
1 min
(default setting),
5 min
, or
30 min
.
C
Setting the Auto Off Function
The time that passes before the camera enters standby mode is fixed in the following situations:
•
When a menu is displayed: 3 minutes (when auto off is set to
30 s
or
1 min
)
•
When shooting using
Pet portrait auto release
: 5 minutes (when auto off is set to
30 s
or
1 min
)
•
When shooting using
Smile timer
: 5 minutes (when auto off is set to
30 s
or
1 min
)
•
When the AC Adapter is connected: 30 minutes
•
When an HDMI cable is connected: 30 minutes
113
114
Format Card/Format Memory
Press the d
button
M z m enu icon
M
For m at card/For m at m e m or y
M k
button
Use this option to format a memory card or the internal memory.
Formatting the memory cards or internal memory permanently deletes all data. Data that has been deleted cannot be recovered.
Make sure to save important images to a computer before formatting.
Formatting a Memory Card
•
Insert a memory card into the camera.
•
Select
Format card
in the setup menu and then press the k
button.
Formatting the Internal Memory
•
Remove the memory card from the camera.
•
Select
Format memory
in the setup menu and then press the k
button.
To start formatting, select
Format
on the screen that is displayed and press the k
button.
•
Do not turn the camera off or open the battery-chamber/memory card slot cover during formatting.
Language
Press the d
button
M z m enu icon
M
Language
M k
button
Select a language for display of camera menus and messages.
Charge by Computer
Press the d
button
M z m enu icon
M
Charge b y co m puter
M k button
Option a
Auto
(default setting)
Off
Description
When the camera is connected to a computer that is
121), the battery inserted into the camera
is automatically charged using power supplied by the computer.
The battery inserted into the camera is not charged when the camera is connected to a computer.
B
Notes About Charging with a Computer
•
When connected to a computer, the camera turns on and starts charging. If the camera is turned off, charging stops.
•
About 3 hours are required to charge a fully exhausted battery. Charging time increases when images are transferred while the battery is charging.
•
The camera turns off automatically if there is no communication with the computer for 30 minutes after the battery has finished charging.
B
When the Charge Lamp Quickly Flashes Green
Charging cannot be performed, possibly due to one of the reasons described below.
•
The ambient temperature is not suited to charging. Charge the battery indoors with an ambient temperature of 5°C to 35°C (41°F to 95°F).
•
The USB cable is not connected correctly, or the battery is faulty. Make sure the USB cable is connected correctly or replace the battery if necessary.
•
The computer is in sleep mode and is not supplying power. Wake up the computer.
•
The battery cannot be charged because the computer cannot supply power to the camera due to the computer’s settings or its specifications.
115
116
Reset All
Press the d
button
M z m enu icon
M
Reset all
M k
button
When
Reset
is selected, the camera’s settings are restored to their default values.
•
Some settings, such as
Time zone and date
or
Language
, are not reset.
•
The wireless connection is terminated if this option is performed while Wi-Fi is connected.
C
Resetting File Numbering
To reset file numbering to “0001”, delete all images saved on the memory card or in the internal memory (
Reset all
.
Conformity Marking
Press the d
button
M z m enu icon
M
Confor m it y m arking
M k button
View some of the conformity markings that the camera complies with.
Firmware Version
Press the d
button
M z m enu icon
M
Fir m ware version
M k
button
View the current camera firmware version.
•
The firmware version cannot be displayed while Wi-Fi is connected.
Using the Wi-Fi (Wireless LAN)
Function
You can perform the following functions if you install the dedicated software
“Wireless Mobile Utility” on your smart device that runs on Android OS or iOS, and connect it to the camera.
Take Photos
You can capture still images using the two methods described below.
•
Release the shutter on the camera and save the captured images to a smart device.
•
Use a smart device to remotely release the camera shutter and save images to the smart device.
View Photos
Images that are saved in the camera’s memory card can be transferred and viewed on your smart device. You can also preselect the images in the camera that you want to transfer to your smart device.
B
Notes About Security Settings
No security settings such as password are configured for the camera at the time of purchase. We strongly recommend performing the required security settings before using the Wi-Fi function. Use
Options
in the Wi-Fi options menu (
the security settings.
Installing the Software on the Smart Device
1
Use
y
our s
m
art device to connect to the Google Pla
y
Store,
App Store or other online apps
m
arketplace and search for
“Wireless Mobile Utilit
y
.”
•
Check the user’s manual provided with your smart device for further details.
2
Check the description and other infor
m
ation and install the software.
C
User’s Manual for Wireless Mobile Utility
Download the user’s manual from the website below.
•
Android OS: http://nikonimglib.com/ManDL/WMAU/
•
iOS: http://nikonimglib.com/ManDL/WMAU-ios/
To establish a connection with the camera, press the
Z
(Wi-Fi) button on the camera, and turn on the Wi-Fi function of the smart device, and then start the “Wireless Mobile
Utility” while
Negotiating... Please wait.
is displayed on the camera.
117
Connecting the Smart Device to the
Camera
1
Press the
Z
(Wi-Fi) button on the ca
m
era.
118
•
The screen shown on the right is displayed.
•
If no connection confirmation is received from the smart device within three minutes, the message
No access.
is displayed and the camera returns to the Wi-Fi options screen.
•
You can also select
Connect to smart device
in the Wi-Fi options menu to display the screen shown on the right.
Connect to smart device
SSID:
XXXXXXXXXXXXXXXXXX
XXXXXX
Password:
XXXXXXXXXXXXXXXX
Cancel
2
Set the Wi-Fi setting on the s
m
art device to On.
•
Check the user’s manual provided with your smart device for further details.
•
After the network names (SSIDs) that can be used for the smart device are displayed, select the SSID displayed on the camera.
•
When
Auth./encryp.
is set to
WPA2-PSK-AES
in the Wi-Fi options menu, the message for entering a password is displayed.
Enter the password that is displayed on the camera.
3
Start the “Wireless Mobile Utilit
y
” installed on the s
m
art device, while
Negotiating... Please wait.
is displa
y
ed on the ca
m
era.
•
The screen for selecting “Take photos” or “View photos” is displayed.
•
When the message “Cannot connect to camera.” is displayed, return to step 1 and retry the procedure.
•
See “Installing the Software on the Smart Device” (
C
Touching an NFC-compatible Smart Device to the Camera for a
Wi-Fi Connection
When you use a smart device that is compatible with near field communication (NFC) functions and runs on Android OS, you can establish a Wi-Fi connection and start the “Wireless Mobile Utility” by touching the NFC antenna on the smart device to the
Y
(N-Mark) on the camera.
To Terminate the Wi-Fi Connection
Perform one of the operations described below.
•
Turn off the camera.
•
Select
Disable Wi-Fi
in the Wi-Fi options menu on the camera (except when the camera is operated by remote control).
•
Set the Wi-Fi setting on the smart device to Off.
B
Notes About Wi-Fi Connection
•
Wi-Fi connection operations are disabled in the following situations:
- When the camera is connected to a TV, computer, or printer
- While recording movies
- While the camera is processing data such as saving images or recording movies
- When the camera is connected to a smart device
•
Select
Disable Wi-Fi
in areas where the use of radio waves is prohibited.
•
When Wi-Fi is connected,
Auto off
is disabled.
•
When Wi-Fi is connected, the battery drains faster than normal.
•
The Wi-Fi connection is terminated in the following situations:
- When the battery level is low
- When starting movie recording in short movie show mode
C
Security Settings
If no security settings (encryption and password) are configured for the camera’s
Wi-Fi function, unauthorized third parties may access the network and cause harm.
We strongly recommend performing the required security settings before using the
Wi-Fi function.
Use
Options
in the Wi-Fi options menu (
104) to perform the security settings.
119
120
Preselecting Images in the Camera That
You Want to Transfer to a Smart Device
You can preselect images in the camera that you want to transfer to a smart device. Movies cannot be preselected for transfer.
1
Select i
m
ages to transfer.
You can preselect the images to transfer to a smart device in the following menus:
•
Mark for Wi-Fi upload
in the playback menu (
•
Upload from camera
When using
Upload from camera
, the SSID and password of the camera are displayed after images are selected.
2
Connect the ca
m
era and s
m
art device (
118).
•
Tapping “View photos” in the “Wireless Mobile Utility” displays the confirmation screen to transfer the specified images to the smart device.
B
Preselecting Images to Transfer During Playback
While the camera is in playback mode, press the
Z
button or use the NFC function to establish a Wi-Fi connection, and preselect the displayed images that you want to transfer.
•
You can preselect one image in full-frame playback mode. You can preselect all images in the sequence when the key picture is displayed for images in a sequence.
•
You can preselect one image specified in thumbnail playback mode. You can preselect all images in the sequence when the key picture is displayed for images in a sequence.
•
You can preselect all the images captured on the selected date in calendar display playback mode.
This operation is not available when you use
Connect to smart device
in the Wi-Fi options menu to establish the Wi-Fi connection.
Connecting the Camera to a TV,
Printer, or Computer
You can enhance your enjoyment of images and movies by connecting the camera to a TV, printer, or computer.
Open the connector cover.
Insert the plug straight.
Micro-USB connector
HDMI m icro connector
(T y pe D)
•
Before connecting the camera to an external device, make sure the remaining battery level is sufficient and turn the camera off. Before disconnecting, make sure to turn the camera off.
•
If the EH-62G AC Adapter (available separately) is used, this camera can be powered from an electrical outlet. Do not use any other make or model of
AC adapter as it may cause the camera to heat up or malfunction.
•
For information about the connection methods and subsequent operations, refer to the documentation included with the device in addition to this document.
121
122
Viewing i m ages on a TV
Printing i m
Images and movies captured with the camera can be viewed on a TV.
Connection method: Connect a commercially available HDMI cable to the TV’s HDMI input jack.
ages without using a co m puter
If you connect the camera to a PictBridge-compatible printer, you can print images without using a computer.
Connection method: Connect the camera directly to the printer’s USB port with the USB cable.
Viewing and organizing i m ages on a co m puter
You can transfer images to a computer to perform simple retouching and manage image data.
Connection method: Connect the camera to the computer’s
USB port with the USB cable.
•
Before connecting to a computer, install ViewNX 2 on the computer (
•
If any USB devices that draw the power from the computer are connected, disconnect them from the computer before you connect the camera to it. Connecting the camera and other USB-powered devices to the same computer simultaneously may cause a camera malfunction or excessive power supply from the computer, which could damage the camera or memory card.
Connecting the Camera to a TV (Playback on a TV)
1
Turn off the ca
m
era and connect it to the TV.
•
Make sure that the plugs are properly oriented. Do not insert or remove the plugs at an angle when connecting or disconnecting them.
HDMI m icro connector (T y pe D)
2
Set the TV’s input to e
x
ternal input.
•
See the documentation provided with your TV for details.
3
Hold down the
c
(pla
y
back) button to turn on the ca
m
era.
•
Images are displayed on the TV.
•
The camera monitor does not turn on.
to HDMI jack
123
124
Connecting the Camera to a Printer (Direct
Print)
Users of PictBridge-compatible printers can connect the camera directly to the printer and print images without using a computer.
Connecting the Camera to a Printer
1
Turn on the printer.
2
Turn off the ca
m
era and connect it to the printer using the
USB cable.
•
Make sure that the plugs are properly oriented. Do not insert or remove the plugs at an angle when connecting or disconnecting them.
3
The ca
m
era is auto
m
aticall
y
turned on.
•
The
PictBridge
startup screen (
1
) is displayed in the camera monitor, followed by the
Print selection
screen (
2
).
1 2
Print selection
15/11/2015 32
B
If the PictBridge Startup Screen Is Not Displayed
When
Auto
is selected for
Charge by computer
(
print images with direct connection of the camera to some printers. If the PictBridge startup screen is not displayed after the camera is turned on, turn the camera off and disconnect the USB cable. Set
Charge by computer
to
Off
and reconnect the camera to the printer.
Printing Images One at a Time
1
Use the
m
ulti selector
JK
to select the desired i
m
age and press the
k
button.
•
Move the zoom control toward f
( h
) to switch to thumbnail playback or g
( i
) to switch to full-frame playback.
Print selection
15/11/2015
32
2
Use
HI
to select
Copies
and press the
k
button.
•
Use
HI
to set the desired number of copies (up to 9) and press the k
button.
PictBridge
1 prints
Start print
Copies
Paper size
3
Select
Paper size
and press the
k
button.
•
Select the desired paper size and press the k
button.
•
To print with the paper size setting configured on the printer, select
Default
.
•
The paper size options available on the camera vary depending on the printer that you use.
4
Select
Start print
and press the
k
button.
•
Printing starts.
PictBridge
4 prints
Start print
Copies
Paper size
PictBridge
4 prints
Start print
Copies
Paper size
125
126
Printing Multiple Images
1
When the
Print selection
screen is displa
y
ed, press the
d
(
m
enu) button.
Print selection
15/11/2015 32
2
Use the
m
ulti selector
HI
to select
Paper size
and press the
k
button.
•
Select the desired paper size and press the k
button.
•
To print with the paper size setting configured on the printer, select
Default
.
•
The paper size options available on the camera vary depending on the printer that you use.
•
To exit the print menu, press the d
button.
3
Select
Print selection
, or
Print all images
, and press the
k
button.
Print menu
Print selection
Print all images
Paper size
Print menu
Print selection
Print all images
Paper size
Print selection
Select images (up to 99) and the number of copies (up to 9) of each.
•
Use the multi selector
JK
to select images, and use
HI
to specify the number of copies to be printed.
•
Images selected for printing are indicated by
M
and the number of copies to be printed. To cancel the print
Print selection
Back selection, set the number of copies to 0.
•
Move the zoom control toward g
( i
) to switch to full-frame playback or f
( h
) to switch to thumbnail playback.
•
Press the k
button when setting is complete. When the screen for confirming the number of print copies is displayed, select
Start print
and press the k
button to start printing.
Print all i m ages
One copy each of all images saved in the internal memory, or on the memory card, is printed.
•
When the screen for confirming the number of print copies is displayed, select
Start print
and press the k
button to start printing.
127
128
Using ViewNX 2 (Transferring Images to a
Computer)
Installing ViewNX 2
ViewNX 2 is free software that enables you to transfer images and movies to your computer so that you can view, edit, or share them. To install ViewNX 2, download the ViewNX 2 installer from the website below and follow the onscreen installation instructions.
http://nikonimglib.com/nvnx/
For system requirements and other information, see the Nikon website for your region.
Transferring Images to a Computer
1
Prepare a
m
e
m
or
y
card that contains i
m
ages.
You can use any of the methods below to transfer images from the memory card to a computer.
•
SD memory card slot/card reader
: Insert the memory card into the card slot of your computer or the card reader (commercially available) that is connected to the computer.
•
Direct USB connection
: Turn the camera off and ensure that the memory card is inserted in the camera. Connect the camera to the computer using the USB cable.
The camera automatically turns on.
To transfer images that are saved in the camera’s internal memory, remove the memory card from the camera before connecting it to the computer.
If a message is displayed prompting you to choose a program, select
Nikon Transfer 2.
•
When using Windows 7
If the dialog shown at right is displayed, follow the steps below to select Nikon Transfer 2.
1 Under
Import pictures and videos
, click
Change program
. A program selection dialog will be displayed; select
Import
File using Nikon Transfer 2
and click
OK
.
2 Double-click
Import File
.
If the memory card contains a large number of images, it may take a while for
Nikon Transfer 2 to start. Wait until Nikon Transfer 2 starts.
B
Notes About Connecting the USB Cable
Operation is not guaranteed if the camera is connected to the computer via a USB hub.
2
After Nikon Transfer 2 starts, click
Start Transfer
.
Start Transfer
•
Image transfer begins. When image transfer is complete, ViewNX 2 starts and the transferred images are displayed.
•
Consult online help for more information on using ViewNX 2.
3
Ter
m
inate the connection.
•
If you are using a card reader or card slot, choose the appropriate option in the computer operating system to eject the removable disk corresponding to the memory card and then remove the memory card from the card reader or card slot.
•
If the camera is connected to the computer, turn the camera off and disconnect the USB cable.
129
130
Technical Notes
The Charging AC Adapter ..................................................................133
Approved Me m or y Cards ...................................................................153
Caring for the Product
Observe the precautions described below in addition to the warnings in “For
vi–viii) when using or storing the device.
The Camera
Do Not Apply Strong Impact to the Camera
The product may malfunction if subjected to strong shock or vibration. In addition, do not touch or apply force to the lens or lens cover.
Keep Dry
The device will be damaged if immersed in water or subjected to high humidity.
Avoid Sudden Changes in Temperature
Sudden changes in temperature, such as when entering or leaving a heated building on a cold day, can cause condensation to form inside the device. To prevent condensation, place the device in a carrying case or a plastic bag before exposing it to sudden changes in temperature.
Keep Away from Strong Magnetic Fields
Do not use or store this device in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields. Doing so could result in loss of data or camera malfunction.
Do Not Point the Lens at Strong Light Sources for Extended Periods
Avoid pointing the lens at the sun or other strong light sources for extended periods when using or storing the camera. Intense light may cause the image sensor to deteriorate or produce a white blur effect in photographs.
Turn the Product Off Before Removing or Disconnecting the Power
Source or Memory Card
Do not remove the battery while the product is on, or while images are being saved or deleted. Forcibly cutting power in these circumstances could result in loss of data or in damage to product memory or internal circuitry.
131
132
Notes About the Monitor
•
Monitors and electronic viewfinders are constructed with extremely high precision; at least 99.99% of pixels are effective, with no more than 0.01% being missing or defective. Hence while these displays may contain pixels that are always lit (white, red, blue, or green) or always off (black), this is not a malfunction and has no effect on images recorded with the device.
•
Images in the monitor may be difficult to see under bright lighting.
•
Do not apply pressure to the monitor, as this could cause damage or malfunction.
Should the monitor break, care should be taken to avoid injury caused by broken glass and to prevent the liquid crystal from the display touching the skin or entering the eyes or mouth.
The Battery
Precautions for Use
•
Note that the battery may become hot after use.
•
Do not use the battery at ambient temperatures below 0°C (32°F) or above 40°C
(104°F) as this could cause damage or malfunction.
•
If you notice any abnormalities such as excessive heat, smoke, or an unusual smell coming from the battery, immediately discontinue use and consult your retailer or
Nikon-authorized service representative.
•
After removing the battery from the camera or optional battery charger, put the battery in a plastic bag, etc. in order to insulate it.
Charging the Battery
Check the battery level before using the camera and replace or charge the battery if necessary.
•
Charge the battery indoors with an ambient temperature of 5°C to 35°C (41°F to
95°F) before use.
•
A high battery temperature may prevent the battery from charging properly or completely, and may reduce battery performance. Note that the battery may become hot after use; wait for the battery to cool before charging.
When charging the battery inserted into this camera using the Charging AC
Adapter or a computer, the battery is not charged at battery temperatures below
0°C (32°F) or above 50°C (122°F).
•
Do not continue charging once the battery is fully charged as this will result in reduced battery performance.
•
The battery temperature may increase during charging. However, this is not a malfunction.
Carrying Spare Batteries
Whenever possible, carry fully charged spare batteries when taking pictures on important occasions.
Using the Battery When Cold
On cold days, the capacity of batteries tends to decrease. If an exhausted battery is used at a low temperature, the camera may not turn on. Keep spare batteries in a warm place and exchange as necessary. Once warmed, a cold battery may recover some of its charge.
Battery Terminals
Dirt on the battery terminals may prevent the camera from functioning. Should the battery terminals become dirty, wipe them off with a clean, dry cloth before use.
Charging an Exhausted Battery
Turning the camera on or off while an exhausted battery is inserted in the camera may result in reduced battery life. Charge the exhausted battery before use.
Storing the Battery
•
Always remove the battery from the camera or optional battery charger when it is not being used. Minute amounts of current are drawn from the battery while it is in the camera, even when not in use. This may result in excessive battery drain and complete loss of function.
•
Recharge the battery at least once every six months and completely exhaust it before returning it to storage.
•
Put the battery in a plastic bag, etc. in order to insulate it and store it in a cool place.
The battery should be stored in a dry location with an ambient temperature of 15°C to 25°C (59°F to 77°F). Do not store the battery in hot or extremely cold locations.
Battery Life
A marked drop in the time a fully charged battery retains its charge, when used at room temperature, indicates that the battery needs to be replaced. Purchase a new battery.
Recycling Used Batteries
Replace the battery when it no longer holds a charge. Used batteries are a valuable resource. Please recycle used batteries in accordance with local regulations.
The Charging AC Adapter
•
The EH-71P/EH-71PCH/EH-73P/EH-73PCH Charging AC Adapter is for use only with compatible devices. Do not use with another make or model of device.
•
Do not use any USB cable other than the UC-E21. Using a USB cable other than the
UC-E21 could result in overheating, fire or electric shock.
•
Do not, under any circumstances, use another make or model of AC adapter other than the EH-71P/EH-71PCH/EH-73P/EH-73PCH Charging AC Adapter, and do not use a commercially available USB-AC adapter or a battery charger for a mobile phone. Failure to observe this precaution could result in overheating or in damage to the camera.
•
The EH-71P/EH-71PCH/EH-73P/EH-73PCH is compatible with AC 100–240 V, 50/60
Hz electrical outlets. When using in other countries, use a plug adapter
(commercially available) as necessary. For more information about plug adapters, consult your travel agency.
133
134
Memory Cards
Precautions for Use
•
Use only Secure Digital memory cards. See “Approved Memory Cards” (
recommended memory cards.
•
Be sure to follow the precautions described in the documentation included with the memory card.
•
Do not put labels or stickers on memory cards.
Formatting
•
Do not format the memory card using a computer.
•
The first time you insert a memory card that has been used in another device into this camera, be sure to format it with this camera. We recommend formatting new memory cards with this camera before using them with this camera.
•
Note that formatting a memory card permanently deletes all images and other data on the memory card.
Be sure to make copies of any images you wish to keep before formatting the memory card.
•
If the message
Card is not formatted. Format card?
is displayed when the camera is turned on, the memory card must be formatted. If there is data that you do not want to delete, select
No
. Copy the necessary data to a computer, etc. If you want to format the memory card, select
Yes
. The confirmation dialog will be displayed. To start formatting, press the k
button.
•
Do not perform the following during formatting, while data is being written to or deleted from the memory card, or during data transfer to a computer. Failure to observe this precaution could result in the loss of data or in damage to the camera or memory card:
- Open the battery-chamber/memory card slot cover to remove/insert the battery or memory card.
- Turn off the camera.
- Disconnect the AC adapter.
Cleaning and Storage
Cleaning
Do not use alcohol, thinner, or other volatile chemicals.
Lens
Monitor
Bod y
Avoid touching glass parts with your fingers. Remove dust or lint with a blower (typically a small device with a rubber bulb attached to one end that is pumped to produce a stream of air out the other end). To remove fingerprints or other stains that cannot be removed with a blower, wipe the lens with a soft cloth, using a spiral motion that starts at the center of the lens and working toward the edges. If this fails, clean the lens using a cloth lightly dampened with commercial lens cleaner.
Remove dust or lint with a blower. To remove fingerprints and other stains, clean the monitor with a soft, dry cloth, being careful not to apply pressure.
•
Use a blower to remove dust, dirt, or sand, then wipe gently with a soft, dry cloth.
•
After using the camera at the beach or other sandy or dusty environment, wipe off any sand, dust, or salt with a dry cloth lightly dampened with fresh water and dry thoroughly.
Note that foreign matter inside the camera could cause damage not covered by the warranty.
Storage
Remove the battery if the camera will not be used for an extended period. To prevent mold or mildew, take the camera out of storage at least once a month.
Turn the camera on and release the shutter a few times before putting the camera away again. Do not store the camera in any of the following locations:
•
Places that are poorly ventilated or subject to humidity of over 60%
•
Exposed to temperatures above 50°C (122°F) or below –10°C (14°F)
•
Next to equipment that produces strong electromagnetic fields, such as televisions or radios
For storing the battery, follow the precautions in “The Battery” (
135
136
Error Messages
Refer to the table below if an error message is displayed.
Displa y Cause/Solution
Battery temperature is elevated. The camera will turn off.
The camera will turn off to prevent overheating.
The camera turns off automatically. Wait until the camera or battery temperature has cooled before resuming use.
Memory card is write protected.
The write-protect switch is in the “lock” position. Slide the write-protect switch to the “write” position.
This card cannot be used. An error occurred while accessing the
This card cannot be read.
memory card.
•
Use an approved memory card.
•
Check that the terminals are clean.
•
Confirm that the memory card is correctly inserted.
Card is not formatted.
Format card?
The memory card has not been formatted for use in the camera.
Formatting deletes all data saved on the memory card. If you need to keep copies of any images, make sure to select
No
and save the copies to a computer or other medium before formatting the memory card. Select
Yes
and press the k
button to format the memory card.
Out of memory.
Image cannot be saved.
Delete images or insert a new memory card.
An error occurred while saving the image.
Insert a new memory card or format the memory card or internal memory.
The camera has run out of file numbers.
Insert a new memory card or format the memory card or internal memory.
There is insufficient space to save the copy.
Delete images from the destination.
Image cannot be modified.
Check that the images can be edited.
–
–
A
Memory contains no images.
File contains no image data.
This image cannot be deleted.
Displa
No access.
y
Cannot record movie.
Save previously recorded data as a time-lapse movie?
This file cannot be played back.
All images are hidden.
Could not connect.
Cause/Solution
A time-out error occurred while saving the movie on the memory card.
Select a memory card with a faster write speed.
The camera turned off while recording time-lapse movie.
•
Select
Yes
to create a time-lapse movie with the previously captured images.
•
Select
No
to delete the incomplete data.
There are no images in the internal memory or on the memory card.
•
Remove the memory card to play back images in the internal memory.
•
To copy the images saved in the camera’s internal memory to the memory card, press the d
button to select
Copy
in the playback menu.
The file was not created or edited with this camera.
The file cannot be viewed on this camera.
View the file using a computer or the device used to create or edit this file.
There are no images available for a slide show, etc.
The image is protected.
Disable protection.
The camera could not receive the signal from the smart device. Establish the wireless connection again.
•
Press the
Z
button.
•
Touch an NFC-compatible smart device to the camera.
•
Select
Connect to smart device
in the Wi-Fi options menu.
The camera failed to establish the connection while receiving the signals from the smart device. Set a different channel in
Channel
under
Options
in the Wi-Fi options menu, and establish the wireless connection.
A
–
–
137
138
Displa
Wi-Fi connection terminated.
System error y
Lens error. Try again after turning the camera off and on.
Communications error
Cause/Solution
The Wi-Fi connection is terminated in the following situations:
•
When the signal strength is insufficient
•
When the battery level is low
•
When a cable or memory card was removed and inserted
Use a sufficiently charged battery, disconnect the TV, computer and printer, and then establish the wireless connection again.
If the error persists, contact your retailer or Nikon-authorized service representative.
An error occurred while communicating with the printer.
Turn the camera off and reconnect the
USB cable.
An error occurred in the camera’s internal circuitry.
Turn the camera off, remove and reinsert the battery, and turn the camera on. If the error persists, contact your retailer or
Nikon-authorized service representative.
A
–
Printer error: check paper.
Printer error: out of paper.
Displa
Printer error: check printer status.
y
Printer error: paper jam.
Printer error: check ink.
Printer error: out of ink.
Printer error: file corrupt.
Cause/Solution
After solving the problem, select
Resume
and press the k
button to resume printing.*
Load the specified size of paper, select
Resume
, and press the k
button to resume printing.*
Remove the jammed paper, select
Resume
, and press the k
button to resume printing.*
Load the specified size of paper, select
Resume
, and press the k
button to resume printing.*
There is a problem with the printer’s ink.
Check the ink, select
Resume
, and press the k
button to resume printing.*
Replace the ink cartridge, select
Resume
, and press the k
button to resume printing.*
There is a problem with the image file to be printed.
Select
Cancel
and press the k
button to cancel printing.
–
–
–
–
–
–
–
A
* See the documentation provided with your printer for further guidance and information.
139
140
Troubleshooting
If the camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon-authorized service representative.
Power, Display, Settings Issues
Proble
The camera is on but does not respond.
m Cause/Solution
•
Wait for recording to end.
•
If the problem persists, turn the camera off.
If the camera does not turn off, remove and reinsert the battery or batteries or, if you are using an AC adapter, disconnect and reconnect the AC adapter.
Note that although any data currently being recorded will be lost, data that have already been recorded will not be affected by removing or disconnecting the power source.
The camera cannot be turned on.
The battery is exhausted.
The camera turns off without warning.
The monitor is blank.
The camera becomes hot.
•
The camera automatically turns off to save power
(auto off function).
•
The camera and battery may not work properly at low temperatures.
•
The inside of the camera has become hot. Leave the camera off until the inside of the camera has cooled, and then try turning it on again.
•
The camera is off.
•
The camera automatically turns off to save power
(auto off function).
•
The flash lamp flashes while the flash is charging.
Wait until charging is complete.
•
The camera is connected to a TV or computer.
•
The camera and smart device are connected using a Wi-Fi connection and the camera is being operated by remote control.
The camera may become hot when used for an extended period of time to shoot movies or send images, or when used in a hot environment; this is not a malfunction.
–
A
–
–
–
–
–
Proble
The battery inserted in the camera cannot be charged.
The monitor is hard to read.
O
flashes on the screen.
Date and time of recording are not correct.
m Cause/Solution
•
Confirm all connections.
•
When connected to a computer, the camera may not charge for any of the reasons described below.
-
Off
is selected for
Charge by computer
in the setup menu.
- Battery charging stops if the camera is turned off.
- Battery charging is not possible if the camera’s display language and date and time have not been set, or the date and time were reset after the camera’s clock battery was exhausted. Use the Charging AC Adapter to charge the battery.
- Battery charging may stop when the computer enters sleep mode.
- Depending on the computer specifications, settings, and status, battery charging may not be possible.
•
Adjust the monitor brightness.
•
The monitor is dirty. Clean the monitor.
•
If the camera clock has not been set,
O
flashes on the shooting screen, and images and movies saved before the clock is set are dated “00/00/
0000 00:00” and “01/01/2015 00:00” respectively.
Set the correct time and date for
Time zone and date
in the setup menu.
•
The camera clock is not as accurate as ordinary watches or clocks. Periodically compare the time of the camera clock with that of a more accurate timepiece, and reset as required.
No indicators displayed in monitor.
Date stamp
available.
not
Date not stamped on images even when
Date stamp
is enabled.
Hide info settings
is selected for
Photo info
in the setup menu.
in
Monitor
Time zone and date
has not been set in the setup menu.
•
The current shooting mode does not support
Date stamp
.
•
A function that restricts the date stamp is enabled.
•
The date cannot be stamped on movies.
A
–
–
–
–
141
142
Proble m
Screen for setting time zone and date is displayed when the camera is turned on.
The camera settings reset.
Cause/Solution
The clock battery is exhausted; all settings were restored to their default values.
A
The camera makes sound.
Unable to select a menu.
When some setting is selected in the
Autofocus mode
or while in some shooting modes, the camera may produce an audible focusing sound.
•
Some functions cannot be used with other menu options.
•
Some menus are not available when Wi-Fi is connected. Terminate the Wi-Fi connection.
Shooting Issues
Proble m
Cannot switch to shooting mode.
Cause/Solution
Disconnect the HDMI cable or USB cable.
A
Cannot take pictures or record movies.
The camera cannot focus.
Images are blurred.
•
When the camera is in playback mode, press the c
button, shutter-release button, or b
( e
) button.
•
When menus are displayed, press the d button.
•
The flash is charging while the flash lamp is flashing.
•
The battery is exhausted.
•
The subject is too close. Try shooting using scene auto selector mode,
Close-up
scene mode, or macro mode.
•
The subject is hard to focus on.
•
Set
AF assist
in the setup menu to
Auto
.
•
Turn the camera off and then on again.
•
Use the flash.
•
Increase the ISO sensitivity value.
•
Enable
Photo VR
when shooting still images.
Enable
Movie VR
when recording movies.
•
Use a tripod to stabilize the camera (using the self-timer at the same time is more effective).
–
Proble m
Bright specks appear in images captured with flash.
Cause/Solution
The flash is reflecting off particles in the air. Set the flash mode setting to
W
(off).
Flash does not fire.
Digital zoom cannot be used.
No sound when the shutter is released.
AF-assist illuminator does not light.
•
The flash mode is set to
W
(off).
•
A scene mode that restricts the flash is selected.
•
A function that restricts the flash is enabled.
•
Digital zoom
is set to
Off
in the setup menu.
•
Digital zoom cannot be used with certain shooting modes or when using certain settings in other functions.
Image mode
not available.
A function that restricts
Image mode
is enabled.
Off
is selected for
Shutter sound
in
Sound settings
in the setup menu. No sound is produced with some shooting modes and settings, even when
On
is selected.
Off
is selected for
AF assist
in the setup menu. AFassist illuminator may not light depending on the position of the focus area or the current shooting mode, even when
Auto
is selected.
Images appear smeared.
Colors are unnatural.
The lens is dirty. Clean the lens.
White balance or hue is not adjusted properly.
Randomly spaced bright pixels
(“noise”) appear in image.
Images are too dark
(underexposed).
The subject is dark and the shutter speed is too slow, or ISO sensitivity is too high. Noise can be reduced by:
•
Using the flash
•
Specifying a lower ISO sensitivity setting
•
The flash mode is set to
W
(off).
•
The flash window is blocked.
•
The subject is beyond the range of the flash.
•
Adjust exposure compensation.
•
Increase ISO sensitivity.
•
The subject is backlit. Select
Backlighting
scene mode or set the flash mode setting to
X
(fill flash).
A
143
144
Proble m
Images are too bright
(overexposed).
Unexpected results when flash set to
V
(auto with red-eye reduction).
Cause/Solution
Adjust exposure compensation.
Use any scene mode other than taking the picture again.
Night portrait
and change the flash mode to any setting other than
V
(auto with red-eye reduction) and try
,
A
Skin tones are not softened.
Saving images takes time.
A ring-shaped belt or rainbowcolored stripe appears in the monitor or images.
•
In some shooting conditions, facial skin tones may not be softened.
•
For images containing 4 or more faces, try using the
Skin softening
effect in
Glamour retouch
in the playback menu.
It may take more time to save images in the following situations:
•
When the noise reduction function is in operation, such as when shooting in a dark environment
•
When the flash mode is set to
V
(auto with red-eye reduction)
•
When capturing images in the following scene modes
-
Hand-held
in
Night landscape
-
HDR
set to
On
in
Backlighting
-
Hand-held
in
Night portrait
-
Easy panorama
•
When the skin softening function is applied while shooting
•
When using continuous shooting mode
When shooting with backlighting or when a very strong light source (such as sunlight) is in the frame, a ring-shaped belt or rainbow-colored stripe
(ghosting) may occur. Change the position of the light source, or frame the picture so that the light source does not enter the frame, and try again.
–
–
Playback Issues
Proble
Cannot edit images.
m
File cannot be played back.
Cannot zoom in on image.
Cannot rotate image.
Images are not displayed on TV.
Cause/Solution
•
This camera may not be able to play back images saved with another make or model of digital camera.
•
This camera cannot play back movies recorded with another make or model of digital camera.
•
This camera may not be able to play back data edited on a computer.
•
Playback zoom cannot be used with movies.
•
This camera may not be able to zoom in on images captured with another make or model of digital camera.
•
Some images cannot be edited. Images that have already been edited may not be edited again.
•
There is not enough free space on the memory card or in the internal memory.
•
This camera is unable to edit images captured with other cameras.
•
Editing functions used for images are not available for movies.
This camera cannot rotate images captured with another make or model of digital camera.
•
A computer or printer is connected to the camera.
•
The memory card contains no images.
•
Remove the memory card to play back images in the internal memory.
•
The camera is off.
•
The battery is exhausted.
•
The USB cable is not correctly connected.
Nikon Transfer 2 does not start when the camera is connected to a computer.
•
The camera is not recognized by the computer.
•
The computer is not set to start Nikon Transfer 2 automatically. For more information about Nikon
Transfer 2, refer to help information contained in
ViewNX 2.
–
–
A
–
–
–
–
–
–
–
–
–
145
146
Proble m
The PictBridge startup screen is not displayed when the camera is connected to a printer.
Images to be printed are not displayed.
Cannot select paper size with the camera.
Cause/Solution
With some PictBridge-compatible printers, the
PictBridge startup screen may not be displayed and it may be impossible to print images when
Auto
is selected for
Charge by computer
in the setup menu. Set
Charge by computer
to
Off
and reconnect the camera to the printer.
•
The memory card contains no images.
•
Remove the memory card to print images in the internal memory.
The camera cannot be used to select the paper size in the following situations, even when printing from a PictBridge-compatible printer. Use the printer to select the paper size.
•
The printer does not support the paper sizes specified by the camera.
•
The printer automatically selects the paper size.
A
–
–
File Names
Images or movies are assigned file names as follows.
File name: DSCN 0001 .JPG
(1) (2) (3)
(1) Identifier
(2) File nu m ber
(3) E x tension
Not shown on the screen of the camera.
•
DSCN: Original still images, movies, still images created by the movie editing function
•
SSCN: Small picture copies
•
RSCN: Cropped copies
•
FSCN: Images created by an image editing function other than crop and small picture, movies created by the movie editing function
Assigned in ascending order, starting with “0001” and ending with “9999.”
Indicates file format.
•
.JPG: Still images
•
.MOV: Movies
147
148
Optional Accessories
Batter y
Charger
MH-66 Battery Charger
It takes about 1 hour and 50 minutes to charge a fully exhausted battery.
EH-62G AC Adapter
(connect as shown)
AC
Adapter
Make sure that the power connector cable is fully inserted in the power connector slot before inserting the AC adapter into the battery chamber. In addition, make sure that the power connector cable is fully inserted in the battery chamber slot before closing the batterychamber/memory card slot cover. If part of the cable protrudes from the slots, the cover or cable may be damaged when the cover is closed.
Availability may vary with country or region.
See our website or brochures for the latest information.
Specifications
Nikon COOLPIX S7000 Digital Camera
I
T y
Nu m pe m ber of effective pi age sensor
Lens
Focal length f/-nu
Construction
Vibration reduction
Autofocus (AF)
Focus range
Monitor
Fra
Fra
(pla m m y m ber e coverage
(shooting m ode) e coverage back m ode) x
Focus-area selection els
Digital zoo m m agnification
Compact digital camera
16.0 million (Image processing may reduce the number of effective pixels.)
1
/
2.3
-in. type CMOS; approx. 16.76 million total pixels
NIKKOR lens with 20× optical zoom
4.5–90.0 mm (angle of view equivalent to that of
25–500 mm lens in 35mm [135] format) f/3.4–6.5
12 elements in 10 groups (1 ED lens element)
Up to 4× (angle of view equivalent to that of approx. 2000 mm lens in 35mm [135] format)
Lens shift (still images)
Lens shift and electronic VR (movies)
Contrast-detect AF
•
[W]: Approx. 30 cm (1 ft)–
∞
,
[T]: Approx. 2 m (6 ft 7 in.)–
∞
•
Macro mode: Approx. 1 cm (0.4 in.)–
∞
(wideangle position)
(All distances measured from center of front surface of lens)
Face priority, manual with 99 focus areas, center, subject tracking, target finding AF
7.5 cm (3-in.), approx. 460k-dot, TFT LCD with antireflection coating and 5-level brightness adjustment
Approx. 99% horizontal and vertical (compared to actual picture)
Approx. 99% horizontal and vertical (compared to actual picture)
149
150
I
Storage m
(pi
Media
File s x els) y
File for ste m age size m ats
Internal memory (approx. 20 MB),
SD/SDHC/SDXC memory card
DCF and Exif 2.3 compliant
Still images: JPEG
Movies: MOV (Video: H.264/MPEG-4 AVC, Audio:
LPCM stereo)
•
16M (High) [4608×3456
P
]
•
16M [4608×3456]
•
8M [3264×2448]
•
4M [2272×1704]
•
2M [1600×1200]
•
VGA [640×480]
•
16:9 [4608×2592]
•
1:1 [3456×3456]
•
ISO 125–1600
•
ISO 3200, 6400 (available when using Auto mode)
ISO sensitivit y
(Standard output sensitivit y )
E x posure
Metering m ode
E x posure control
Shutter
Speed
Aperture
Range
Self-ti m er
Flash
Range (appro x .)
(ISO sensitivit y : Auto)
Flash control
Matrix, center-weighted (digital zoom less than 2×), spot (digital zoom 2× or more)
Programmed auto exposure and exposure compensation
(–2.0 – +2.0 EV in steps of
1
/
3
EV)
Mechanical and CMOS electronic shutter
•
•
1
1
/
/
1500
4000
–1 s
s (maximum speed during high-speed continuous shooting)
•
4 s (
Fireworks show
scene mode)
Electronically-controlled ND filter (–2 AV) selection
2 steps (f/3.4 and f/6.8 [W])
Can be selected from 10 s and 2 s
[W]: 0.5–2.8 m (1 ft 8 in.–9 ft 2 in.)
[T]: 2.0 m (6 ft 6 in.)
TTL auto flash with monitor preflashes
Interface
USB connector
Micro-USB connector (Do not use any USB cable other than the UC-E21.), Hi-Speed USB
•
Supports Direct Print (PictBridge)
HDMI output connector
HDMI micro connector (Type D)
Wi-Fi (Wireless LAN)
Standards
Range (line of sight)
IEEE 802.11b/g/n (standard wireless LAN protocol)
Approx. 10 m (10 yd)
Operating frequenc y
Data rates (actual m easured values)
2412–2462 MHz (1–11 channels)
IEEE 802.11b: 5 Mbps
IEEE 802.11g: 15 Mbps
IEEE 802.11n: 15 Mbps
Securit y
Access protocols
OPEN/WPA2
Infrastructure
Supported languages
Power sources
Charging ti m e
Arabic, Bengali, Bulgarian, Chinese (Simplified and
Traditional), Czech, Danish, Dutch, English, Finnish,
French, German, Greek, Hindi, Hungarian,
Indonesian, Italian, Japanese, Korean, Marathi,
Norwegian, Persian, Polish, Portuguese (European and Brazilian), Romanian, Russian, Serbian, Spanish,
Swedish, Tamil, Telugu, Thai, Turkish, Ukrainian,
Vietnamese
One EN-EL19 Rechargeable Li-ion Battery (included)
EH-62G AC Adapter (available separately)
Approx. 1 h 50 min (when using EH-71P/EH-71PCH/
EH-73P/EH-73PCH Charging AC Adapter and when no charge remains)
Batter y life
1
Still i m ages
Movies (actual batter y life for recording)
2
Tripod socket
Approx. 210 shots when using EN-EL19
Approx. 40 min when using EN-EL19
Di m ensions (W × H × D)
Weight
1/4 (ISO 1222)
Approx. 99.5 × 60.0 × 27.4 mm (4.0 × 2.4 × 1.1 in.)
(excluding projections)
Approx. 161 g (5.7 oz) (including battery and memory card)
Operating environ m ent
Te m perature
Hu m idit y
0°C–40°C (32°F–104°F)
85% or less (no condensation)
151
152
•
Unless otherwise stated, all figures assume a fully-charged battery and an ambient temperature of 23 ±3°C (73.4 ±5.4°F) as specified by the Camera and Imaging Products Association (CIPA).
1
2
Battery life may vary depending on conditions of use, such as the interval between shots or the length of time that menus and images are displayed.
Individual movie files cannot exceed 4 GB in size or 29 minutes in length.
Recording may end before this limit is reached if camera temperature becomes elevated.
EN-EL19 Rechargeable Li-ion Battery
T y pe
Rated capacit y
Operating te m perature
Di m ensions (W × H × D)
Weight
Rechargeable lithium-ion battery
DC 3.7 V, 700 mAh
0°C–40°C (32°F–104°F)
Approx. 31.5 × 39.5 × 6 mm (1.3 × 1.6 × 0.3 in.)
Approx. 14.5 g (0.5 oz)
EH-71P/EH-71PCH/EH-73P/EH-73PCH Charging AC Adapter
Rated input
EH-71P/EH-71PCH
EH-73P/EH-73PCH
Rated output
Operating te m perature
Di m ensions (W × H × D)
AC 100–240 V, 50/60 Hz, MAX 0.2 A
AC 100–240 V, 50/60 Hz, MAX 0.14 A
DC 5.0 V, 1.0 A
0°C–40°C (32°F–104°F)
Approx. 55 × 22 × 54 mm (2.2 × 0.9 × 2.2 in.)
(excluding plug adapter)
For Argentina: Approx. 55 × 63 × 59 mm (2.2 × 2.5 ×
2.4 in.)
For India: Approx. 55 × 63.5 × 59 mm
Weight
EH-71P/EH-71PCH
EH-73P/EH-73PCH
Approx. 48 g (1.7 oz) (excluding plug adapter)
For Argentina and India: Approx. 73 g (2.6 oz)
Approx. 51 g (1.8 oz) (excluding plug adapter)
For Argentina and India: Approx. 76 g (2.7 oz)
•
Nikon will not be held liable for any errors this manual may contain.
•
The appearance of this product and its specifications are subject to change without notice.
Approved Memory Cards
The following Secure Digital (SD) memory cards have been tested and approved for use in this camera.
•
Memory cards with an SD Speed Class rating of 6 or faster are recommended for recording movies. When using a memory card with a lower Speed Class rating, movie recording may stop unexpectedly.
SanDisk
TOSHIBA
SD
2 GB m e m
– or y card SDHC m e m or y card
4 GB, 8 GB, 16 GB, 32 GB
4 GB, 8 GB, 16 GB, 32 GB
SDXC m e m or y card
64 GB, 128 GB
64 GB
Panasonic
Le x ar
2 GB
–
4 GB, 8 GB, 16 GB, 32 GB
4 GB, 8 GB, 16 GB, 32 GB
64 GB
64 GB, 128 GB
•
Contact the manufacturer for details on the above cards. We cannot guarantee camera performance when using memory cards made by other manufacturers.
•
If you use a card reader, make sure that it is compatible with your memory card.
Trademark Information
•
Windows is either a registered trademark or trademark of Microsoft
Corporation in the United States and/or other countries.
•
Adobe, the Adobe logo, and Reader are either trademarks or registered trademarks of Adobe Systems Incorporated in the United States and/or other countries.
•
SDXC, SDHC, and SD Logos are trademarks of SD-3C, LLC.
•
PictBridge is a trademark.
•
HDMI, HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
•
Wi-Fi and the Wi-Fi logo are trademarks or registered trademarks of the
Wi-Fi Alliance.
•
Android and Google Play are trademarks or registered trademarks of
Google, Inc.
153
154
•
The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.
•
All other trade names mentioned in this manual or the other documentation provided with your Nikon product are the trademarks or registered trademarks of their respective holders.
AVC Patent Portfolio License
This product is licensed under the AVC Patent Portfolio License for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC standard (“AVC video”) and/or (ii) decode AVC video that was encoded by a consumer engaged in a personal and noncommercial activity and/or was obtained from a video provider licensed to provide AVC video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, L.L.C.
See http://www.mpegla.com.
FreeType License (FreeType2)
•
Portions of this software are copyright © 2012 The FreeType Project
(http://www.freetype.org). All rights reserved.
MIT License (HarfBuzz)
•
Portions of this software are copyright © 2015 The HarfBuzz Project
(http://www.freedesktop.org/wiki/Software/HarfBuzz). All rights reserved.
Index
S
ym
bols
A
Auto mode......................
x
Scene auto selector mode
................................................................
W
Backlighting mode..............
y
Scene mode.........................
n
Short movie show mode .........
u
Special effects mode.....
F
Smart portrait mode..................
X
c
Playback mode..............................
C
List by date mode........................
g
(Telephoto).........................................
f
(Wide-angle)....................................
i
Playback zoom .................................
h
Thumbnail playback..................
j
Help.......................................................
m
Flash mode .........................................
n
Self-timer...........................................
p
Macro mode....................................
o
Exposure compensation .........
Z
,
,
c
Playback button ......................
b
( e
movie-record) button
..........................................................
,
k
Apply selection button ................
d
Menu button
......................................
l
Delete button.....................
Y
N-Mark ..............................
,
A
AC adapter .................................
,
AF area mode .........................................
AF assist...............................................
Aperture value .......................................
Auto flash.................................................
Auto mode ...............................
Auto off............................................
Auto with red-eye reduction .......
Autofocus.....................
,
Autofocus mode.......................
,
B
Backlighting mode ....................
Battery ...................................
,
Battery chamber...........................
,
Battery-chamber/memory card slot cover..........................................................
Battery charger..............................
,
Battery latch................................................
Beach
Z
...................................................
Blink proof................................................
Brightness.....................................
Button sound .......................................
C
Calendar Display ..................................
Capturing still images while
recording movies ................................
Center .........................................................
Charge by computer.......................
Charge lamp.........................................
Charger ..............................................
,
,
,
Close-up k
....................................
,
Cloudy ........................................................
Compression ratio...............................
Computer...................................
Conformity marking ........................
Connecting to smart devices
..........................................................
,
Connector cover .................................
Continuous..............................................
155
156
Copying images...................................
Creative slider........................................
Crop.....................................................
,
Cross process o
..................................
Current settings .................................
D
Date and time .............................
Date format...................................
Date stamp.............................................
Daylight.....................................................
Delete.................................................
Digital zoom..................................
Direct print ................................
D-Lighting ...............................................
Dusk/dawn i
.......................................
E
Easy panorama p
Easy panorama playback.................
Editing images .......................................
EH-71P/EH-71PCH/EH-73P/
EH-73PCH...............................................
EN-EL19 ...................................................
Eyelet for camera strap................... ii
F
Face detection .......................................
Face priority.............................................
File names..............................................
Fill flash......................................................
Fireworks show m
.....................
Firmware version................................
Fixed range auto..................................
Flash ...............................................
,
Flash lamp ..........................................
,
Flash mode .....................................
Flash off.....................................................
Fluorescent..............................................
Focus...................................................
Focus area ................................................
Focus indicator .................................
Focus lock .................................................
Food u
..............................................
,
Format internal memory...............
Format memory cards..............
Formatting.......................................
Frame rate..............................................
Full-frame playback............................
Full-time AF..................................
,
Functions that cannot be used
simultaneously......................................
G
Glamour retouch ........................
H
HDMI cable................................
HDMI micro connector .............
HDR ..............................................................
Help..............................................................
High-contrast mono.
F
..................
High-speed continuous ..................
Histogram.................................................
HS movie.......................................
Hue ...............................................................
I
Image mode ...........................................
Image quality .........................................
Image review.......................................
Image selection ....................................
Image size ................................................
Incandescent..........................................
Internal memory ......................................
Internal memory indicator
..............................................................
Interval .......................................................
ISO sensitivity.........................................
L
Landscape c
.........................................
Language ...............................................
Lens............................................
,
Lens cover.....................................................
List by date mode...............................
M
Macro mode...........................................
Mark for Wi-Fi upload .............
Memory card.............................
Memory card slot ....................................
Microphone (stereo) ..............................
Micro-USB connector ...........
Mirror b
...................................................
Mode dial .....................................
Monitor.........................................
Monitor settings ................................
Movie editing ................................
Movie menu ...................................
Movie options ........................................
Movie recording ..........................
,
Movie VR.................................................
Multi selector ...................
,
N
NFC ............................................
,
Night landscape mode............
Night portrait e
Nikon Transfer 2 .................................
N-Mark......................................
,
Nostalgic sepia
P
......................
Number of exposures remaining
.........................................................................
Number of shots..................................
O
Optical zoom ..........................................
Optional accessories .......................
Options ...................................................
P
Paper size....................................
Party/indoor f
Pet portrait auto release..................
Pet portrait
O
...............................
Photo info..............................................
Photo VR...................................................
PictBridge ...................................
,
Playback .....................................................
Playback menu..............................
Playback mode.......................................
Playback zoom ..............................
Pop l
......................................................
Portrait b
.................................................
Power connector cover ...........
,
Power switch/power-on lamp
....................................................................
Pre-focus ...................................................
Preset manual.........................................
Pre-shooting cache ...................
Pressing all the way.............................
Pressing halfway ...................................
Print.....................................
Printer ...........................................
,
Protect........................................................
Q
Quick effects ...................................
Quick retouch ........................................
R
Rechargeable Li-ion battery .......
Recording slow motion movies
............................................................
Red-eye correction .............................
Remaining movie recording time
...............................................................
Reset all....................................................
157
158
Restore default settings ................
Rotate image ..........................................
S
Scene mode ............................................
SD memory card.....................
Security settings......................
,
Selective color
I
................................
Self-Collage.....................................
,
Self-timer..................................................
Self-timer lamp ................................
,
Sequence display options .....
Setup menu.................................
Shooting....................................................
Shooting menu ...................
,
Shooting mode .....................................
Short movie show mode.................
Shutter sound..............................
Shutter speed.........................................
Shutter-release button .........
,
Single...........................................................
Single AF.........................................
Skin softening...............................
,
Slide show ................................................
Slow sync .................................................
Small picture ...........................................
Smart portrait menu..................
,
Smart portrait mode ..........................
Smile timer ...............................................
Snow z
.....................................................
Soft
O
................................................
Sound settings.....................................
Speaker...........................................................
Special effects mode..........................
Sports d
...........................................
Strap ........................................................... ii
Subject tracking ...........................
Sunset h
..................................................
T
Target finding AF........................
Telephoto..................................................
Televisions..................................
Text input ...............................................
Thumbnail display ......................
Time difference..................................
Time-lapse movie
N
...............
Time zone.......................................
Time zone and date................
Toy camera effect 1 m
....................
Toy camera effect 2 n
...................
Tripod socket...................................
U
Upload from camera ...........
USB cable...................
V
ViewNX 2.....................................
Vividness ...................................................
Volume.......................................................
W
White balance........................................
Wide-angle ...............................................
Wi-Fi button..........................
,
Wi-Fi disconnection.............
,
Wi-Fi options menu .....
,
Wind noise reduction .....................
Wireless LAN.........................................
Z
Zoom control.....................................
,
Zooming in/out.....................................
No reproduction in any form of this manual, in whole or in part
(except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION.
© 2015 Nikon Corporation
FX6A04(11)
6MN52611-04
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement