Compaq PRESARIO CQ60

Add to my manuals
33 Pages

advertisement

Compaq PRESARIO CQ60 | Manualzz

Multimedia

User Guide

Downloaded from LpManual.com Manuals

© Copyright 2009 Hewlett-Packard

Development Company, L.P.

Windows is a U.S. registered trademark of

Microsoft Corporation.

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.

Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

First Edition: August 2009

Document Part Number: 573756-001

Product notice

This user guide describes features that are common to most models. Some features may not be available on your computer.

Downloaded from LpManual.com Manuals

Table of contents

1 Multimedia features

Identifying your multimedia components .............................................................................................. 2

Adjusting the volume ............................................................................................................................ 3

Using the media activity functions ........................................................................................................ 4

Using the media activity hotkeys ......................................................................................... 4

2 Multimedia software

Using DVD Play software ..................................................................................................................... 5

Using other preinstalled multimedia software ....................................................................................... 5

Installing multimedia software from a disc ............................................................................................ 5

3 Audio

Connecting external audio devices ...................................................................................................... 6

Checking your audio functions ............................................................................................................. 6

4 Video

Connecting an external monitor or projector ........................................................................................ 8

Connecting an HDMI device (select models only) ................................................................................ 9

Configuring audio for HDMI (select models only) ................................................................ 9

5 Optical drive

Identifying the installed optical drive ................................................................................................... 11

Using optical discs .............................................................................................................................. 12

Selecting the right disc ....................................................................................................................... 13

CD-R discs ......................................................................................................................... 13

CD-RW discs ..................................................................................................................... 13

DVD±R discs ..................................................................................................................... 13

DVD±RW discs .................................................................................................................. 13

LightScribe DVD+R discs .................................................................................................. 13

Blu-ray discs ...................................................................................................................... 14

Playing music ..................................................................................................................................... 15

Watching a movie ............................................................................................................................... 16

Changing DVD region settings ........................................................................................................... 17

Creating or “burning” a CD or DVD .................................................................................................... 18

Removing an optical disc (CD or DVD) .............................................................................................. 19

6 Webcam (select models only)

Webcam tips ....................................................................................................................................... 21

iii

Downloaded from LpManual.com Manuals

Adjusting webcam properties ............................................................................................................. 21

7 Troubleshooting

The optical disc tray does not open for removal of a CD or DVD ....................................................... 22

The computer does not detect the optical drive ................................................................................. 23

A disc does not play ........................................................................................................................... 23

A disc does not play automatically ..................................................................................................... 24

A DVD movie stops, skips, or plays erratically ................................................................................... 24

A DVD movie is not visible on an external display ............................................................................. 25

The process of burning a disc does not begin, or it stops before completion .................................... 25

A device driver must be reinstalled .................................................................................................... 25

Obtaining the latest HP device drivers ............................................................................... 26

Obtaining the latest Windows device drivers ..................................................................... 26

Index ................................................................................................................................................................... 27

iv

Downloaded from LpManual.com Manuals

1 Multimedia features

Your computer includes multimedia features that allow you to listen to music, watch movies, and view pictures. Your computer may include the following multimedia components:

Optical drive for playing audio and video discs

Integrated speakers for listening to music

Integrated microphone for recording your own audio

● Integrated webcam that allows you to capture and share video

Preinstalled multimedia software that allows you to play and manage your music, movies, and pictures

● Hotkeys that provide fast access to multimedia tasks

NOTE:

Your computer may not include all of the components listed.

The following sections explain how to identify and use the multimedia components included with your computer.

1

Downloaded from LpManual.com Manuals

Identifying your multimedia components

The following illustration and table describe the multimedia features of the computer.

Component

(1)

(2)

(3)

(4)

(5)

Webcam light

Webcam

Internal microphone

Speakers (2)

Audio-out (headphone) jack

(6)

Audio-in (microphone) jack

Description

Turns on when video software accesses the webcam.

Records audio and video and captures still photographs.

Records sound.

Produce sound.

Produce sound when connected to optional powered stereo speakers, headphones, earbuds, a headset, or television audio.

NOTE:

When a device is connected to the headphone jack, the computer speakers are disabled.

Connects an optional computer headset microphone, stereo array microphone, or monaural microphone.

2 Chapter 1 Multimedia features

Downloaded from LpManual.com Manuals

Adjusting the volume

You can adjust the volume using the following controls:

Hotkeys:

Press fn+home to mute and restore speaker sound.

Press fn+pg up to increase speaker sound. Hold down the hotkey to increase speaker sound incrementally.

Press fn+pg dn to decrease speaker sound. Hold down the hotkey to decrease speaker sound incrementally.

Windows® volume control:

a.

Click the Speakers icon in the notification area, at the far right of the taskbar.

b.

Increase or decrease the volume by moving the slider up or down. Click the Mute

Speakers icon to mute the volume.

– or –

a.

Right-click the Speakers icon in the notification area, and then click Open Volume Mixer.

b.

In the Speakers column, increase or decrease the volume by moving the slider up or down.

You can also mute the volume by clicking the Mute Speakers icon.

If the Speakers icon is not displayed in the notification area, follow these steps to add it:

a.

Right-click the Show hidden icons icon (the arrow at the far left side of the notification area).

b.

Click Customize notification icons.

c.

Under Behaviors, select Show icon and notifications for the Volume icon.

d.

Click OK.

Program volume control:

Volume can also be adjusted within some programs.

Downloaded from LpManual.com Manuals

Adjusting the volume 3

Using the media activity functions

The media activity hotkeys control the play of an audio CD or a DVD in the optical drive.

Using the media activity hotkeys

A media activity hotkey is a combination of the fn key (1) and a function key (2).

When an audio CD or a DVD is not playing, press fn+f9 (3) to play the disc.

When an audio CD or a DVD is playing, use the following hotkeys:

To pause or resume playing the disc, press fn+f9 (3).

To stop the disc, press fn+f10 (4).

To play the previous track of an audio CD or the previous chapter of a DVD, press fn+f11

(5).

To play the next track of an audio CD or the next chapter of a DVD, press fn+f12 (6).

4 Chapter 1 Multimedia features

Downloaded from LpManual.com Manuals

2 Multimedia software

Your computer includes preinstalled multimedia software that allows you to play music, watch movies, and view pictures. The following sections provide details about DVD Play and other preinstalled multimedia software.

Using DVD Play software

DVD Play turns your computer into a mobile entertainment center. With DVD Play, you can enjoy music and DVD movies.

To start DVD Play, select Start > All Programs > DVD Play.

For more information on using DVD Play, refer to the software Help.

Using other preinstalled multimedia software

To locate other preinstalled multimedia software:

Select Start > All Programs, and then open the multimedia program you want to use. For example, if you want to use Windows Media Player to play an audio CD, click Windows Media Player.

NOTE:

Some programs may be located in subfolders.

Installing multimedia software from a disc

To install any multimedia software from a CD or DVD, follow these steps:

1.

Insert the disc into the optical drive.

2.

When the installation wizard opens, follow the on-screen instructions.

3.

Restart the computer if you are prompted to do so.

NOTE:

For details about using software included with the computer, refer to the software manufacturer’s instructions, which may be provided on disc, in the software Help, or on the manufacturer’s Web site.

Using DVD Play software 5

Downloaded from LpManual.com Manuals

3 Audio

Your computer enables you to use a variety of audio features:

Play music using your computer speakers and/or connected external speakers

● Record sound using the internal microphone or connect an external microphone

Download music from the Internet

Create multimedia presentations using audio and images

Transmit sound and images with instant messaging programs

Stream radio programs (select models only) or receive FM radio signals

Create or “burn” audio CDs

Connecting external audio devices

WARNING!

To reduce the risk of personal injury, adjust the volume before putting on headphones, earbuds, or a headset. For additional safety information, refer to the Regulatory, Safety and

Environmental Notices.

To connect external devices such as external speakers, headphone, or a microphone, refer to the manufacturer's instructions provided with the device. For best results, remember the following tips:

Be sure that the device cable is securely connected to the correct jack on your computer. (Cable connectors are normally color-coded to match the corresponding jacks on the computer.)

● Be sure to install any drivers required by the external device.

NOTE:

A driver is a required program that acts like a translator between the device and the programs that use the device.

Checking your audio functions

To check the system sound on your computer, follow these steps:

1.

Select Start > Control Panel.

2.

Click Hardware and Sound.

3.

Click Sound.

4.

When the Sound window opens, click the Sounds tab. Under Program Events, select any sound event, such as a beep or alarm, and click the Test button.

6 Chapter 3 Audio

Downloaded from LpManual.com Manuals

You should hear sound through the speakers or through connected headphones.

To check the record functions of the computer, follow these steps:

1.

Select Start > All Programs > Accessories > Sound Recorder.

2.

Click Start Recording and speak into the microphone. Save the file to your desktop.

3.

Open Windows Media Player and play back the sound.

NOTE:

For best results when recording, speak directly into the microphone and record sound in a setting free of background noise.

To confirm or change the audio settings on your computer, select Start > Control Panel > Hardware

and Sound > Sound.

Downloaded from LpManual.com Manuals

Checking your audio functions 7

4 Video

Your computer enables you to use a variety of video features:

Watch movies

● Play games over the Internet

Edit pictures and video to create presentations

Connect external video devices

Connecting an external monitor or projector

The external monitor port connects an external display device such as an external monitor or a projector to the computer.

To connect a display device, connect the device cable to the external monitor port.

NOTE:

If a properly connected external display device does not display an image, press fn+f4 to transfer the image to the device. Repeatedly pressing fn+f4 alternates the screen image between the computer display and the device.

8 Chapter 4 Video

Downloaded from LpManual.com Manuals

Connecting an HDMI device (select models only)

The computer includes an HDMI (High Definition Multimedia Interface) port. The HDMI port connects the computer to an optional video or audio device, such as a high-definition television, or any compatible digital or audio component.

The computer can support one HDMI device connected to the HDMI port, while simultaneously supporting an image on the computer display or any other supported external display.

NOTE:

To transmit video signals through the HDMI port, you need an HDMI cable (purchased separately), available from most electronics retailers.

To connect a video or audio device to the HDMI port:

1.

Plug one end of the HDMI cable into the HDMI port on the computer.

2.

Connect the other end of the cable to the video device, according to the device manufacturer’s instructions.

3.

Press fn+f4 on the computer to switch the image between the display devices connected to the computer.

Configuring audio for HDMI (select models only)

To configure HDMI audio, first connect an audio or video device, such as a high-definition TV, to the

HDMI port on your computer. Then configure the default audio playback device as follows:

1.

Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then click

Playback devices.

2.

On the Playback tab, click either Digital Output or Digital Output Device (HDMI).

3.

Click Set Default, and then click OK.

Connecting an HDMI device (select models only) 9

Downloaded from LpManual.com Manuals

To return audio to the computer speakers, follow these steps:

1.

Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then click

Playback devices.

2.

On the Playback tab, click Speakers.

3.

Click Set Default, and then click OK.

10 Chapter 4 Video

Downloaded from LpManual.com Manuals

5 Optical drive

Your computer includes an optical drive that expands the functionality of the computer. Identify what kind of device is installed in your computer to see its capabilities. The optical drive allows you to read data discs, play music, and watch movies. If your computer includes a Blu-ray Disc ROM Drive, then you can also watch high-definition video from disc.

Identifying the installed optical drive

Select Start > Computer.

You will see a list of all the devices installed on your computer, including your optical drive. You may have one of the following types of drives:

DVD-ROM Drive

● DVD±RW/R and CD-RW Combo Drive

DVD±RW/R and CD-RW Combo Drive with Double-Layer (DL) support

LightScribe DVD±RW/R and CD-RW Combo drive with Double-Layer (DL) support

Blu-ray Disc ROM Drive with SuperMulti DVD±R/RW Double Layer (DL) support

NOTE:

Some of the drives listed above may not be supported by your computer.

Downloaded from LpManual.com Manuals

Identifying the installed optical drive 11

Using optical discs

An optical drive, such as a DVD-ROM drive, supports optical discs (CDs and DVDs). These discs store information, such as music, photos, and movies. DVDs have a higher storage capacity than CDs.

Your optical drive can read standard CD and DVD discs. If your optical drive is a Blu-ray Disc ROM

Drive, it can also read Blu-ray discs.

NOTE:

Some of the optical drives listed may not be supported by your computer. The listed drives are not necessarily all of the supported optical drives.

Some optical drives can also write to optical discs as described in the following table.

Optical drive type Write to CD-RW Write to DVD±RW/R Write to DVD+R DL

Yes No

Write label to

LightScribe CD or

DVD±RW/R

No DVD±RW/R and CD-

RW Combo Drive

DVD±RW/R and CD-

RW Combo Drive with

DL support

LightScribe DVD±RW/

R and CD-RW Combo

Drive with DL support

Blu-ray Disc ROM

Drive with SuperMulti

DVD±R/RW DL support

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

No

Yes

No

CAUTION:

To prevent possible audio and video degradation, loss of information, or loss of audio or video playback functionality, do not initiate Sleep or Hibernation while reading or writing to a CD or DVD.

To prevent loss of information, do not initiate Sleep or Hibernation when writing to a CD or DVD.

12 Chapter 5 Optical drive

Downloaded from LpManual.com Manuals

Selecting the right disc

An optical drive supports optical discs (CDs and DVDs). CDs, used to store digital data, are also used for commercial audio recordings and are convenient for your personal storage needs. DVDs are used primarily for movies, software, and data backup purposes. DVDs are the same form factor as CDs but have at least 8 times the storage capacity.

NOTE:

The optical drive on your computer may not support all the types of optical discs discussed in this section.

CD-R discs

Use CD-R (write-once) discs to create permanent archives and to share files with virtually anyone.

Typical uses include the following:

● Distributing large presentations

Sharing scanned and digital photos, video clips, and written data

● Making your own music CDs

Keeping permanent archives of computer files and scanned home records

● Offloading files from your hard drive to free up disk space

After data is recorded, it cannot be erased or written over.

CD-RW discs

Use a CD-RW disc (a rewritable version of a CD) to store large projects that must be updated frequently.

Typical uses include the following:

Developing and maintaining large documents and project files

● Transporting work files

Making weekly backups of hard drive files

● Updating photos, video, audio, and data continuously

DVD±R discs

Use blank DVD±R discs to permanently store large amounts of information. After data is recorded, it cannot be erased or written over.

DVD±RW discs

Use DVD+RW discs if you want to be able to erase or write over data that you saved earlier. This type of disc is ideal for testing audio or video recordings before you burn them to a CD or DVD that cannot be changed.

LightScribe DVD+R discs

Use LightScribe DVD+R discs for sharing and storing data, home videos, and photos. These discs are read-compatible with most DVD-ROM drives and set-top DVD video players. With a LightScribe-enabled drive and LightScribe software, you can write data to the disc and then add a designer label to the outside of the disc.

Selecting the right disc 13

Downloaded from LpManual.com Manuals

Blu-ray discs

Blu-ray Disc, also called BD, is a high-density optical disc format for the storage of digital information, including high-definition video. A single-layer Blu-ray Disc can store 25 GB, over five times the capacity of a single-layer DVD at 4.7 GB. A dual-layer Blu-ray Disc can store 50 GB, almost 6 times the capacity of a dual-layer DVD at 8.5 GB.

Typical uses include the following:

Storage of large amounts of data

High-definition video

Video games

14 Chapter 5 Optical drive

Downloaded from LpManual.com Manuals

Playing music

1.

Turn on the computer.

2.

Press the release button (1) on the optical drive bezel to release the disc tray.

3.

Pull out the tray (2).

4.

Hold the disc by the edges and position the disc label-side up over the tray spindle.

NOTE:

If the tray is not fully accessible, tilt the disc carefully to position it over the spindle.

5.

Gently press the disc (3) down onto the tray spindle until the disc snaps into place.

6.

Close the disc tray.

7.

If you have not yet configured AutoPlay, the AutoPlay dialog box opens and asks how you want to use the media content. Choose DVD Play or Windows Media Player, both preinstalled on your computer.

NOTE:

After you insert a disc, a short pause is normal.

If Sleep or Hibernation is initiated during playback of a disc, you may experience the following behaviors:

Your playback may be interrupted.

You may see a warning message asking if you want to continue. If this message is displayed, click

No.

You may need to restart the CD or DVD to resume playback.

Playing music 15

Downloaded from LpManual.com Manuals

Watching a movie

Your optical drive allows you to watch movies from a disc. You can also watch high-definition movies from a disc if your computer includes an optional Blu-ray Disc ROM Drive or an optional HD DVD Drive.

1.

Turn on the computer.

2.

Press the release button (1) on the optical drive bezel to release the disc tray.

3.

Pull out the tray (2).

4.

Hold the disc by the edges and position the disc label-side up over the tray spindle.

NOTE:

If the tray is not fully accessible, tilt the disc carefully to position it over the spindle.

5.

Gently press the disc (3) down onto the tray spindle until the disc snaps into place.

6.

Close the disc tray.

DVD Play launches and plays the movie automatically.

NOTE:

To watch a high-definition movie, you must use the program DVD Play.

16 Chapter 5 Optical drive

Downloaded from LpManual.com Manuals

Changing DVD region settings

Most DVDs that contain copyrighted files also contain region codes. The region codes help protect copyrights internationally.

You can play a DVD containing a region code only if the region code on the DVD matches the region setting on your DVD drive.

CAUTION:

The region settings on your DVD drive can be changed only 5 times.

The region setting you select the fifth time becomes the permanent region setting on the DVD drive.

The number of region changes remaining is displayed on the DVD Region tab.

To change settings through the operating system:

1.

Select Start > Control Panel > System and Security. Then in the System area, click Device

Manager.

NOTE:

Windows includes the User Account Control feature to improve the security of your computer. You may be prompted for your permission or password for tasks such as installing software, running utilities, or changing Windows settings. Refer to Help and Support for more information.

2.

Click the arrow next to DVD/CD-ROM drives to expand the list to show all of the installed drives.

3.

Right-click the DVD drive for which you want to change region settings, and then click

Properties.

4.

Make the desired changes on the DVD Region tab.

5.

Click OK.

Downloaded from LpManual.com Manuals

Changing DVD region settings 17

Creating or “burning” a CD or DVD

If your computer includes a CD-RW, DVD-RW, or DVD±RW optical drive, you can use software such as Windows Media Player or CyberLink Power2Go to burn data and audio files, including MP3 and WAV music files. To burn video files to a CD or DVD, use MyDVD.

Observe the following guidelines when burning a CD or DVD:

● Before burning a disc, save and close any open files and close all programs.

A CD-R or DVD-R is usually best for burning audio files because after the information is copied, it cannot be changed.

NOTE:

You cannot create an audio DVD with CyberLink Power2Go.

Because some home and car stereos will not play CD-RWs, use CD-Rs to burn music CDs.

A CD-RW or DVD-RW is generally best for burning data files or for testing audio or video recordings before you burn them to a CD or DVD that cannot be changed.

DVD players used in home systems usually do not support all DVD formats. Refer to the manufacturer's instructions that came with your DVD player for a list of supported formats.

An MP3 file uses less space than other music file formats, and the process for creating an MP3 disc is the same as the process for creating a data file. MP3 files can be played only on MP3 players or on computers with MP3 software installed.

To burn a CD or DVD, follow these steps:

1.

Download or copy the source files into a folder on your hard drive.

2.

Insert a blank CD or DVD into the optical drive.

3.

Select Start > All Programs, and then select the name of the software you want to use.

NOTE:

Some programs may be located in subfolders.

4.

Select the kind of CD or DVD you want to create—data, audio, or video.

5.

Right-click Start, click Open Windows Explorer, and navigate to the folder where the source files are stored.

6.

Open the folder, and then drag the files to the drive that contains the blank optical disc.

7.

Initiate the burning process as directed by the program you have selected.

For specific instructions, refer to the software manufacturer's instructions, which may be provided with the software, on disc, or on the manufacturer's Web site.

CAUTION:

Observe the copyright warning. It is a criminal offense, under applicable copyright laws, to make unauthorized copies of copyright-protected material, including computer programs, films, broadcasts, and sound recordings. Do not use this computer for such purposes.

18 Chapter 5 Optical drive

Downloaded from LpManual.com Manuals

Removing an optical disc (CD or DVD)

1.

Press the release button (1) on the drive bezel to release the disc tray, and then gently pull out the tray (2) until it stops.

2.

Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.

NOTE:

If the tray is not fully accessible, tilt the disc carefully as you remove it.

3.

Close the disc tray and place the disc in a protective case.

Downloaded from LpManual.com Manuals

Removing an optical disc (CD or DVD) 19

6 Webcam (select models only)

Your computer includes an integrated webcam, located at the top of the display. The webcam is an input device that allows you to capture and share video. Preinstalled CyberLink YouCam software provides new features that expand the webcam experience.

To access the webcam and CyberLink YouCam software, select Start > All Programs > CyberLink

YouCam > YouCam.

NOTE:

The first time you access the YouCam software, you may experience a brief delay as the software loads.

Using YouCam as your default webcam software enables you to experiment with the following features:

Video—Record and play back webcam video. You can also e-mail or upload video to YouTube, using the icon on the software interface.

● Streaming video—When you open your instant message program, YouCam displays a floating toolbar that lets you add graphic effects.

Special effects—Add frames, filters, and emoticons to your snapshots and video.

● Snapshots—Take single frame or “burst” webcam shots in rapid succession.

Connect—E-mail photos and video using the icon on the software interface.

NOTE:

For details about using webcam software, refer to the software manufacturer's instructions, which may be provided with the software, on disc, or on the manufacturer's Web site.

20 Chapter 6 Webcam (select models only)

Downloaded from LpManual.com Manuals

Webcam tips

For optimum performance, observe the following guidelines while using the webcam:

Be sure that you have the latest version of an instant message program before starting a video conversation.

The webcam may not work properly across some network firewalls.

NOTE:

If you are having trouble viewing or sending multimedia files to someone on another LAN or outside your network firewall, temporarily disable the firewall, perform the task you want to perform, and then reenable the firewall. To permanently resolve the problem, reconfigure the firewall as necessary, and adjust the policies and settings of other intrusion detection systems. For additional information, contact your network administrator or IT department.

Whenever possible, place bright light sources behind the camera and out of the picture area.

Adjusting webcam properties

You can adjust webcam properties using the Properties dialog box, which is accessible from various programs that use the integrated camera, usually from a configuration, settings, or properties menu:

Brightness—Controls the amount of light that is incorporated into the image. A higher brightness setting creates a brighter image; a lower brightness setting creates a darker image.

Contrast—Controls the difference between lighter and darker areas on the image. A higher contrast setting intensifies the image; a lower contrast setting maintains more of the original information’s dynamic range but leads to a flatter image.

Hue—Controls the aspect of color that distinguishes it from another color (what makes a color red, green, or blue). Hue is distinct from saturation, which measures the intensity of the hue.

Saturation—Controls the strength of color in the final image. A higher saturation setting creates a bolder image; a lower saturation setting creates a more subtle image.

Sharpness—Controls the definition of edges in an image. A higher sharpness setting creates a more defined image; a lower sharpness setting creates a softer image.

Gamma—Controls the contrast affecting the mid-level grays or midtones of an image. Adjusting the gamma of an image allows you to change the brightness values of the middle range of gray tones without dramatically altering the shadows and highlights. A lower gamma setting makes grays look black, and makes dark colors even darker.

Backlight Comp—Compensates in cases where a subject with a large amount of background light would otherwise be obscured by blooming or silhouetting.

For information about using the webcam, select Start > Help and Support.

Webcam tips 21

Downloaded from LpManual.com Manuals

7 Troubleshooting

The following sections describe several common issues and resolutions.

The optical disc tray does not open for removal of a CD or

DVD

1.

Insert the end of a paper clip (1) into the release access in the front bezel of the drive.

2.

Press in gently on the paper clip until the disc tray is released, and then pull out the tray (2) until it stops.

3.

Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.

NOTE:

If the tray is not fully accessible, tilt the disc carefully as you remove it.

4.

Close the disc tray and place the disc in a protective case.

22 Chapter 7 Troubleshooting

Downloaded from LpManual.com Manuals

The computer does not detect the optical drive

If Windows does not detect an installed device, the device driver software may be missing or corrupted.

If you suspect that the DVD/CD-ROM drive is not being detected, verify that the optical drive is listed in the Device Manager utility.

1.

Remove any discs from the optical drive.

2.

Select Start > Control Panel > System and Security. Then in the System area, click Device

Manager.

3.

In the Device Manager window, click the arrow next to DVD/CD-ROM drives to expand the list to show all of the installed drives.

4.

Right-click the optical device listing to perform the following tasks:

Update driver software

● Disable

Uninstall

Scan for hardware changes. Windows scans your system for installed hardware and installs any required drivers.

Click Properties to see if the device is working properly:

-The Properties window provides details about the device to help you troubleshoot issues.

-Click the Driver tab to update, disable, or uninstall drivers for this device.

A disc does not play

Save your work and close all open programs before playing a CD or a DVD.

Log off the Internet before playing a CD or a DVD.

● Be sure that you insert the disc properly.

Be sure that the disc is clean. If necessary, clean the disc with filtered water and a lint-free cloth.

Wipe from the center of the disc to the outer edge.

● Check the disc for scratches. If you find scratches, treat the disc with an optical disc repair kit available at many electronics stores.

Disable Sleep mode before playing the disc.

Do not initiate Hibernation or Sleep while playing a disc. Otherwise, you may see a warning message asking if you want to continue. If this message is displayed, click No. After you click No, the computer may behave in either of the following ways:

Playback may resume.

The computer does not detect the optical drive 23

Downloaded from LpManual.com Manuals

– or –

◦ The playback window in the multimedia program may close. To return to playing the disc, click the Play button in your multimedia program to restart the disc. In rare cases, you may need to exit the program and then restart it.

Increase system resources:

Turn off printers and scanners, and unplug cameras and portable handheld devices.

Disconnecting these Plug and Play devices frees up valuable system resources and results in better playback performance.

Change desktop color properties. Because the human eye cannot easily tell the difference between colors beyond 16 bits, you should not notice any loss of color while watching a movie if you lower system color properties to 16–bit color, as follows:

1. Right-click on a blank area of the computer desktop, and select Screen resolution.

2. Select Advanced Settings > Monitor tab.

3. Select High Color (16 bit), if this setting is not already selected.

4. Click OK.

A disc does not play automatically

1.

Click Start > Default Programs > Change AutoPlay Settings.

2.

Confirm that the Use AutoPlay for all media and devices check box is selected.

3.

Click Save.

A CD or DVD should now start automatically when it is inserted into the optical drive.

A DVD movie stops, skips, or plays erratically

● Press the Play button. You may have accidentally paused the movie.

Clean the disc.

Conserve system resources by trying the following suggestions:

Log off the Internet.

Change the color properties of the desktop:

1. Right-click on a blank area of the computer desktop, and select Screen resolution.

2. Select Advanced Settings > Monitor tab.

3. Select High Color (16 bit), if this setting is not already selected.

4. Click OK.

Disconnect external devices, such as a printer, scanner, camera, or handheld device.

24 Chapter 7 Troubleshooting

Downloaded from LpManual.com Manuals

A DVD movie is not visible on an external display

1.

If both the computer display and an external display are turned on, press fn+f5 one or more times to switch between the 2 displays.

2.

Configure the monitor settings to make the external display primary:

a.

Right-click on a blank area of the computer desktop, and select Screen resolution.

b.

Specify a primary display and a secondary display.

NOTE:

When using both displays, the DVD image will not appear on any display designated as the secondary display.

To get information about a multimedia question not covered in this guide, go to Start > Help and

Support.

The process of burning a disc does not begin, or it stops before completion

Be sure that all other programs are closed.

● Turn off Sleep mode and Hibernation.

Be sure that you are using the right kind of disc for your drive. See your user guides for more information about disc types.

● Be sure that the disc is inserted properly.

Select a slower write speed and try again.

● If you are copying a disc, save the information on the source disc to your hard drive before trying to burn the contents to a new disc, and then burn from your hard drive.

Reinstall the disc-burning device driver located in the DVD/CD-ROM drives category in Device

Manager.

A device driver must be reinstalled

1.

Remove any discs from the optical drive.

2.

Select Start > Control Panel > System and Security. Then in the System area, click Device

Manager.

3.

In the Device Manager window, click the arrow next to the type of driver you want to uninstall and reinstall (for example, DVD/CD ROMs, Modems, and so on).

4.

Right-click the device listing and click Uninstall. When prompted, confirm that you want to delete the device, but do not restart the computer. Repeat for any other drivers you want to delete.

5.

In the Device Manager window, click Action, and then click Scan for hardware changes.

Windows scans your system for installed hardware and installs default drivers for any devices requiring drivers.

NOTE:

If you are prompted to restart the computer, save all open files, and then continue with the restart.

A DVD movie is not visible on an external display 25

Downloaded from LpManual.com Manuals

6.

Reopen Device Manager, if necessary, and then verify that the drivers are once again listed.

7.

Try running your program again.

If uninstalling and reinstalling the device drivers does not correct the problem, you may need to update your drivers using the procedures in the following section.

Obtaining the latest HP device drivers

1.

Open your Internet browser, go to http://www.hp.com/support , and select your country or region.

2.

Click the option for software and driver downloads, type your computer model number in the product box, and then press enter .

– or –

If you want a specific SoftPaq, enter the SoftPaq number (do not put sp in front of the number) in the Search box, press enter , and follow the instructions provided. Proceed to step 6.

3.

Click your specific product from the models listed.

4.

Click the Windows 7 operating system.

5.

When the list of drivers is displayed, click an updated driver to open a window containing additional information.

6.

Click Install now to install the updated driver without downloading the file.

– or –

Click Download only to save the file to your computer. When prompted, click Save and then select a storage location on your hard drive.

After the file is downloaded, navigate to the folder where the file was stored, and double-click the file to install.

7.

If prompted to do so, restart your computer after the installation is complete, and then verify the operation of the device.

Obtaining the latest Windows device drivers

You can obtain the latest Windows device drivers by using Windows Update. This feature can be set to automatically check for and install updates for the Windows operating system and other Microsoft products.

To use Windows Update:

1.

Click Start > All Programs > Windows Update.

NOTE:

If you have not previously set up Windows Update, you will be prompted to enter settings before you can check for updates.

2.

Click Check for Updates.

3.

Follow the on-screen instructions.

26 Chapter 7 Troubleshooting

Downloaded from LpManual.com Manuals

Index

A

audio devices, connecting

external 6 audio features 6 audio functions, checking 6

audio-in (microphone) jack 2 audio-out (headphone) jack 2

B

Blu-ray disc 14

C

CD

burning 18

inserting 15

removing 19

CD drive 12

checking audio functions 6

configuring HDMI 9

D

device drivers

HP drivers 26

Windows drivers 26

drives, optical drive 12

DVD

burning 18

changing region setting 17

inserting 15

removing 19

DVD drive 12

DVD Play software 5

DVD region settings 17

E

earbuds 2

external audio devices,

connecting 6

external monitor port 8

Downloaded from LpManual.com Manuals

H

HDMI

configuring 9 connecting 9

HDMI port 9

headphone (audio-out) jack 2 headphones 2

high-definition devices,

connecting 9

hotkeys

decreasing speaker volume 3 increasing speaker volume 3 muting speaker volume 3

I

internal microphone, identifying 2

issues, resolving 22

J

jacks

audio-in (microphone) 2 audio-out (headphone) 2

M

media activity hotkeys 4

microphone (audio-in) jack 2 microphone, internal 2

monitor, connecting 8

movie, watching 16

multimedia components,

identifying 2

multimedia software 5 multimedia software, installing 5

music, playing 15

O

optical disc

Blu-ray Disc 14

inserting 15

removing 19

using 12, 13

optical drive

identifying 11 using 11

P

ports

external monitor 8

HDMI 9

projector, connecting 8

R

region codes, DVD 17

S

software

DVD Play 5 installing 5 multimedia 5

Windows Media Player 5

speakers 2

T

tips, webcam 21

troubleshooting

device driver 25 disc burning 25

disc play 23, 24

DVD movie play 24

external display 25

HP device drivers 26

optical disc tray 22

optical drive detection 23

Windows drivers 26

V

video features 8

volume 3 volume buttons 3

Index 27

W

webcam 2 webcam light 2

webcam properties, adjusting 21 webcam tips 21

webcam, using 20

28 Index

Downloaded from LpManual.com Manuals

Downloaded from LpManual.com Manuals

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents