advertisement
COMPACT COMPONENT SYSTEM
SISTEMA DE COMPONENTES COMPACTO
SISTEMA DE COMPONENTE COMPACTO
CA-D501T/MX-D401T/MX-D301T
Consists of CA-D401T and SP-D401
Consta del CA-D401T el SP-D401
Consta do CA-D401T e SP-D401
Consists of CA-D301T and SP-D311
Consta del CA-D301T el SP-D311
Consta do CA-D301T e SP-D311
CA-D501T
DISC
DISC
DISC
COMPACT
DIGITAL AUDIO
3
DISC
TRIPLE TRAY
PLAY & EXCHANGE SYSTEM
MX-D501T
STANDBY
POWER
SENSOR
PHONES
TUNING
DOWN
MIC 1
TUNING
UP
MULTI CONTROL
P. DOWN P. UP
DUBBING REC CD REC START
MIC 2 MIC LEVEL
VOLUME
START/STOP
DECK A/B REVERSE MODE
FM
/AM
MIN MAX
CD
TAPE
AUX
REPEAT
RANDOM
CONTINUE
SOUND
MODE
MX-D401T
DISC
DISC
DISC
COMPACT
DIGITAL AUDIO
3
DISC
TRIPLE TRAY PLAY & EXCHANGE SYSTEM
MX-D401T
STANDBY
POWER
SENSOR
PHONES
TUNING
DOWN
MIC 1
TUNING
UP
MULTI CONTROL
P. DOWN P. UP
DUBBING REC CD REC START
MIC 2 MIC LEVEL
START/STOP
DECK A/B REVERSE MODE
VOLUME
FM
/AM
MIN MAX
CD
TAPE
AUX
REPEAT
RANDOM
CONTINUE
SOUND
MODE
ACTIVE
BASS EX.
MX-D301T
DISC
DISC
DISC
COMPACT
DIGITAL AUDIO
REPEAT
RANDOM
CONTINUE
3 DISC
TRIPLE TRAY PLAY & EXCHANGE SYSTEM
MX-D301T
STANDBY
POWER
SENSOR
PHONES
TUNING
DOWN
MULTI CONTROL
TUNING
UP P. DOWN P. UP
DUBBING REC CD REC START
MIC 1 MIC 2 MIC LEVEL
VOLUME
START/STOP
DECK A/B REVERSE MODE
MIN MAX
CD
TAPE
AUX
ACTIVE
BASS EX.
1
CLOCK
4
2
TIMER
5
3
POWER
6
SLEEP
SHIFT – SELECT +
7 8
ECHO
10
SET
10
9
FM MODE FM/AM
DISC
DISC
DISC
PLAY MODE AUX
C D
£ 8
A
REC PAUSE
B
DECK
VOLUME
SOUND
MODE
ACTIVE
BASS EX.
RM-SED50TXU
REMOTE CONTROL
3
POWER
1
CLOCK
4
2
TIMER
5 6
– SELECT +
7 8
ECHO
10
SET
10
9
FM MODE
SLEEP
SHIFT
FM/AM
DISC
PLAY MODE AUX
DISC
DISC
C D
£ 8
A
REC PAUSE
B
DECK
VOLUME
SOUND
MODE
ACTIVE
BASS EX.
RM-SED50TXU
REMOTE CONTROL
1
CLOCK
4
2
TIMER
5
– SELECT +
7 8
3
POWER
6
9
SLEEP
SHIFT
ECHO
10
DISC
SET
10 FM MODE
FM/AM
DISC
DISC
PLAY MODE AUX
7
/CLEAR
C D
£ 8
A
REC PAUSE
B
DECK
VOLUME
SOUND
MODE
ACTIVE
BASS EX.
RM-SED50TXU
REMOTE CONTROL
A
PLAY
AUTO REVERSE AUTO REVERSE
REC/PLAY
B
EJECT EJECT
FULL-LOGIC CONTROL
AUTO TAPE SELECTOR
A
PLAY
AUTO REVERSE AUTO REVERSE
REC/PLAY
B
EJECT EJECT
FULL-LOGIC CONTROL
AUTO TAPE SELECTOR
CA-D401T
A
PLAY
AUTO REVERSE AUTO REVERSE
REC/PLAY
B
EJECT EJECT
FULL-LOGIC CONTROL
AUTO TAPE SELECTOR
CA-D301T
SP-D401 SP-D311
COMPACT
DIGITAL AUDIO
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
INSTRUÇÕES
For Customer Use:
Enter below the Model No. and Serial
No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference.
Model No.
Serial No.
PART No.
FMUN9002-181M
[ U, UT, US, UB ]
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301T/401T/501T/Cover-1 1 97.7.15, 6:48 PM
Warnings, Cautions and Others
Avisos, precauciones y otras notas
Advertências, precauções e outras notas
IMPORTANT for the U.K.
DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.
BE SURE to replace the fuse only with an identical approved type, as originally fitted.
If nontheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply.
If this product is not supplied fitted with a mains plug then follow the instructions given below:
IMPORTANT.
DO NOT make any connection to the terminal which is marked with the letter E or by the safety earth symbol or coloured green or green-and-yellow.
The wires in the mains lead on this product are coloured in accordance with the following code:
Blue : Neutral
Brown : Live
As these colours may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
IF IN DOUBT - CONSULT A COMPETENT ELECTRICIAN.
Caution –– POWER switch!
Disconnect the mains plug to shut the power off completely. The
POWER switch in any position does not disconnect the mains line. The power can be remote controlled.
¡Atención –– Interruptor POWER!
Desconectar el cable de alimentación para desactivar la alimentación totalmente. Cualquier que sea la posición de ajuste del interruptor POWER, la alimentación no es cortada completamente. La alimentación puede ser controlada remotamente.
Atenção –– Interruptor POWER!
Desconecte o cabo de alimentação para interromper a alimenta-
ção completamente. Qualquer que seja a posição de ajuste do interruptor POWER, a alimentação não é completamente cortada. A alimentação pode ser controlada remotamente.
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1.
Do not remove screws, covers or cabinet.
2.
Do not expose this appliance to rain or moisture.
PRECAUCIÓN
Para reducir riesgos de choques eléctricos, incendio, etc.:
1.
No extraiga los tornillos, los cubiertas ni la caja.
2.
No exponga este aparato a la lluvia o a la humedad.
PRECAUÇÃO
Para reduzir riscos de choques elétricos, incêndio, etc.:
1.
Não remova parafusos e tampas ou desmonte a caixa.
2.
Não exponha este aparelho à chuva nem à umidade.
G-1
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301T/401T/501T/Cover-1 2 97.7.15, 6:49 PM
IMPORTANT FOR LASER PRODUCTS / IMPORTANTE PARA PRODUCTOS LÁSER / IMPOTANTE
PARA PRODUTOS LASER /
/
REPRODUCTION OF LABELS / REPRODUCCIÓN DE ETIQUETAS / REPRODUÇÃO DE ETIQUETAS
/
1 CLASSIFICATION LABEL, PLACED ON REAR ENCLO-
SURE
1 ETIQUETA DE CLASIFICACIÓN, PEGADA EN LA PARTE
POSTERIOR DE LA CAJA
1 ETIQUETA DE CLASSIFICAÇÃO LOCALIZADA NA PARTE
POSTERIOR DA CAIXA DO APARELHO.
2 WARNING LABEL, PLACED INSIDE THE UNIT
2 ETIQUETA DE ADVERTENCIA, PEGADA EN EL INTE-
RIOR DE LA UNIDAD
2 ETIQUETA DE ADVERTÊNCIA LOCALIZADA NA PARTE
INTERNA DA UNIDADE.
CLASS 1
LASER PRODUCT
1.
CLASS 1 LASER PRODUCT
2.
DANGER: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.
3.
CAUTION: Do not open the top cover. There are no user serviceable parts inside the Unit; leave all servicing to qualified service personnel.
1.
PRODUCTO LÁSER CLASE 1
2.
PELIGRO: En el interior hay radiación láser invisible. Evite el contacto directo con el haz.
3.
PRECAUCIÓN: No abra la tapa superior. En el interior de la unidad no existen piezas reparables por el usuario; deje todo servicio técnico en manos de personal calificado.
1.
PRODUTO LASER CLASSE 1
2.
PERIGO: O laser emite uma rediação invisível que é perigosa, caso o aparelho esteja aberto e a trava inoperante ou danificada. Evite exposição direta ao feixe dos raios.
3.
CUIDADO: Não abra a caixa do aparelho. Não existem peças reparáveis pelo usuário na parte interna da unidade.
Solicite assistência técnica somente a pessoal técnico qualificado.
DANGER: Invisible laser radiation when open and interlock failed or defeated.
AVOID DIRECT EXPOSURE
TO BEAM. (e)
VARNING: Osynlig laser- strålning när denna del är
öppnad och spärren är urkopplad. Betrakta ej strålen. (s)
ADVARSEL: Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af funktion. Undgå udsættelse for stråling (d)
VARO: Avattaessa ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersäteilylle. Älä katso säteeseen. (f)
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301T/401T/501T/Cover-1 3 97.7.15, 6:50 PM
G-2
Caution: Proper Ventilation
To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:
1 Front: No obstructions and open spacing.
2 Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.
3 Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of
10 cm or more.
Precaución: el aparato debe estar bien ventilado
Para evitar posibles riesgos de descargas eléctricas e incendios y prevenir cualquier posible daño, coloque el aparato del modo siguiente:
1 Parte delantera: No ponga nada delante, deje el espacio libre.
2 Laterales/ parte superior/ parte trasera: No se debería colocar nada en las áreas y las distancias que se detallan a continuación.
3 Parte inferior: Coloque el aparato sobre una superficie recta. Debe haber buena circulación de aire; para ello, coloque el aparato sobre una base a una altura mínima de 10 cm.
Precaução: Ventilação adequada
Para evitar riscos de choques elétricos e incêndios, e prevenir avarias, instale o aparelho como segue:
1 Parte frontal: Sem obstruções e espaços abertos.
2 Partes laterais/Tampa/Posterior: Nenhuma obstrução deverá ser colocada entre as áreas cujas dimensões são indicadas abaixo.
3 Parte inferior: Instale-o sobre uma superfície plana. Deverá ser mantido espaço suficiente para a ventilação se este for instalado numa posição que tenha uma altura de 10 cm ou mais.
15 cm
15 cm
1 cm
1 cm
CA-D501T/
CA-D3S
CA-D401T/
CA-D301T
1 cm
1 cm
15 cm
15 cm
15 cm
15 cm
15 cm
15 cm
CA-D501T/
CA-D401T/
CA-D301T
G-3
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301T/401T/501T/Cover-1 4 97.7.15, 6:50 PM
Easy operation
Great sound
Triple Tray
Sing Along
Thank you for purchasing the JVC Compact Component System.
We hope it will be a valued addition to your home, giving you years of enjoyment.
Be sure to read this instruction manual carefully before operating your new stereo system.
Here you will find all the information you need to set up and use the system.
For questions that are not be answered in the manual, please contact your dealer.
Features
Here are some of the things that make your System powerful and easy to use.
o The controls and operations have been redesigned to make them very easy to use, so you can spend your time listening to music.
• With the One Touch Operation feature of JVC’s
COMPU PLAY
you can turn on the System and start the radio, the Cassette Deck, or the CD Player with a single touch.
o To get such great sound from such a compact package the System has:
• Programmed sound mode includes live surround effects
D. CLUB, HALL,
and
STADIUM
. It also includes S.E.A (Sound Effect Amplifier) effects
ROCK, CLASSIC,
and
POP
.
o CD changer function can operate 3 discs.
• Discs can be changed during play using the
TRIPLE TRAY
.
• Continuous, random or program play of 3 discs.
Includes a timer for recording broadcasts while you are out, and an easy-to-use Sleep timer.
You can use conventional tapes and CDs for
Karaoke
with the voice masking system. With an optional microphone, you can replace the lead singer’s voice on your favorite songs with your own.
•
Digital Echo
applied to your voice through the microphone gives you a professional sound.
How This Manual Is Organized
In this manual we have incorporated some special features:
• Basic information that is the same for many different functions is grouped in one place, and not repeated in each procedure. For instance, in the section on playing a CD, we do not repeat the information about setting the volume and the sound conditions, which are discussed in the Common
Operations section.
• Name of buttons and controls are written in all capital letters like this: SOUND MODE.
• When we are talking about the Function, rather than the BUTTON or DISPLAY, only the first letter is capitalized.
The manual has a table of contents to help you quickly look up what you want to know.
We’ve enjoyed making this manual for you, and hope you will use it to enjoy the sound and many features built into your System.
IMPORTANT CAUTIONS
1. Installation of the Unit
• Select a place which is level, dry and neither too hot nor too cold. (Between 5°C and 35°C or
41°F and 95°F.)
• Leave sufficient distance between the Unit and a TV.
• Do not use the Unit in a place subject to vibrations.
2. Power cord
• Do not handle the power cord with wet hands!
• Some power (12 watts) is always consumed as long as the power cord is connected to the wall outlet.
• When unplugging the Unit from the wall outlet, always pull the plug, not the power cord.
3. Malfunctions, etc.
• There are no user serviceable parts inside. If anything goes wrong, unplug the power cord and consult your dealer.
• Do not insert any metallic object into the Unit.
1
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 1 97.7.15, 6:05 PM
Table of Contents
Features ...................................................................... 1
How This Manual Is Organized ................................. 1
IMPORTANT CAUTIONS ....................................... 1
Getting Started ................................................ 3
Accessories ................................................................ 3
Set the VOLTAGE SELECTOR Switch .................... 3
How To Put Batteries In the Remote Control ............ 3
Using the Remote Control ......................................... 3
Connecting the FM Antenna ...................................... 4
Connecting the AM Antenna ..................................... 4
Connecting the Speakers
(CA-D501T) ..............................
5
Connecting the Speakers
(MX-D401T/MX-D301T) .........
5
Connecting Auxiliary Equipment .............................. 6
COMPU PLAY .......................................................... 6
Common Operations ....................................... 7
Turning the Power On and Off .................................. 7
Turning the System On ......................................... 7
Turning the System Off ........................................ 7
Adjusting the Volume ................................................ 8
Reinforcing the Bass Sound ...................................... 8
Sound Modes ............................................................. 8
Listening to Auxiliary Equipment ............................. 9
Using the Tuner ............................................. 10
Setting the AM Tuner Interval Spacing .............. 10
One Touch Radio ................................................ 10
Tuning In a Station .................................................. 11
Switching between Frequency Bands ................. 11
Three ways to select a station ............................. 11
Presetting Stations ................................................... 11
To Change the FM Reception Mode ........................ 11
Using the CD Player ...................................... 12
The Quickest Way To Start a CD Is With the
One Touch Operation ..................................... 13
To Insert Discs ......................................................... 13
Basics of Using the CD Player — Normal Play ...... 14
To Play a Disc ..................................................... 14
To Select a Disc, Track Or Passage
Within a Track ................................................ 14
Locating a Track With the Remote Control
Directly ........................................................... 14
To Change Discs While Playing ......................... 14
Continuous Play ....................................................... 15
Programming the Playing Order of the Tracks ........ 15
Random Play ........................................................... 16
Repeating a Selection or the Discs .......................... 17
Tray Lock Function ................................................. 17
Locking the Electronic Lock .............................. 17
Unlocking the Electronic Lock ........................... 17
Using the Cassette Deck
(Listening to a Tape) ................................. 18
One Touch Play .................................................. 18
Regular Play ............................................................ 18
Fast Left and Fast Right ..................................... 19
Music Scan .............................................................. 19
To Find the Beginning of the Current Selection .... 19
To Find the Beginning of the Next Selection ..... 19
Reverse Mode .......................................................... 19
Using the Cassette Deck (Recording) ......... 20
Things To Know Before You Start Recording .... 20
Standard Recording ................................................. 21
To Record Any Sound Source To Tape............... 21
CD Direct Recording ............................................... 22
Tape to Tape Recording (Dubbing) ......................... 22
How to Use the DUBBING Button .................... 22
Using the Timer ............................................. 23
Setting the Clock ..................................................... 23
Setting the Timer ..................................................... 24
Setting the SLEEP Timer ......................................... 25
Using the Microphone .................................. 26
Karaoke (Sing Along) .............................................. 26
Singing Along with Karaoke .............................. 26
Digital Echo ........................................................ 27
To Record Your Singing ..................................... 27
Microphone Mixing ................................................. 28
To Record Microphone Mixing .......................... 28
Playing the Microphone Sound through the Speaker ......................................................... 28
Recording from the Microphone ........................
28
Care And Maintenance ................................. 29
Troubleshooting ............................................ 30
Specifications ................................................ 31
2
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 2 97.7.15, 6:05 PM
Getting Started
Accessories
Check that you have all of the following items, which are supplied with the System.
AM Loop Antenna (1)
Remote Control (1)
Batteries (2)
FM Wire Antenna (1)
AC Plug Adaptor (except for Hong Kong) (1)
If any of these items is missing, contact your dealer immediately.
Set the VOLTAGE SELECTOR Switch
To avoid damaging the System, set the voltage before plugging in the Unit.
o Set the correct voltage for your area with the VOLTAGE SELECTOR switch on the back panel of the
System. Use a screwdriver to rotate the selector so the number the arrow is pointed at is the same as the voltage.
How To Put Batteries In the Remote
Control
Match the polarity (+ and –) on the batteries with the + and – markings in the battery compartment.
R6P (SUM-3)/AA (15F)
CAUTION: Handle batteries properly.
To avoid battery leakage or explosion:
• Remove batteries when the Remote Control will not be used for a long time.
• When you need to replace the batteries, replace both batteries at the same time with new ones.
• Don’t use an old battery with a new one.
• Don’t use different types of batteries together.
Using the Remote Control
The Remote Control makes it easy to use many of the functions of the System from a distance of up to 7m
(23 feet) away.
You need to point the Remote Control at the remote sensor on the System’s front panel.
Remote sensor
DISC
DISC
DISC
COMPACT
DIGITAL AUDIO
3
DISC
TRIPLE TRAY PLAY & EXCHANGE SYSTEM
MX-D401T
STANDBY
POWER
SENSOR
PHONES
TUNING
DOWN
MIC 1
MULTI CONTROL
TUNING
UP P. DOWN
MIC 2 MIC LEVEL
P. UP
DUBBING REC CD REC START
START/STOP
DECK A/B REVERSE MODE
VOLUME
FM
/AM
MIN MAX
CD
TAPE
AUX
REPEAT
RANDOM
CONTINUE
SOUND
MODE
ACTIVE
BASS EX.
A
PLAY
AUTO REVERSE AUTO REVERSE
REC/PLAY
B
EJECT EJECT
FULL-LOGIC CONTROL
AUTO TAPE SELECTOR
3
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 3 97.7.15, 6:05 PM
CAUTION: Make all connections before plugging the Unit into an AC power outlet.
Connecting the FM Antenna
Using the Supplied Wire Antenna
FM Wire Antenna
Extend the supplied FM Wire Antenna horizontally.
Using an FM 75-Ohm Antenna Wire (Not Supplied)
If reception is poor, connect the outside antenna.
ANTENNA
Outside FM antenna wire
AM LOOP
FM
(75
Ω
)
GND
FM
2
20 mm
GND 1
10 mm
3
Before attaching a 75 ohm coaxial lead (the kind with a round wire going to an outside antenna), disconnect the supplied FM Wire Antenna.
CAUTION: To avoid noise, keep antennas away from metallic parts of the System, connecting cord and the AC power cord.
Connecting the AM Antenna
AM antenna wire
(Not supplied) If reception is poor, connect the outside antenna.
1
ANTENNA
AM EXT
AM LOOP
FM
(75
Ω
)
GND
FM
GND
2
Note: Even when connecting an outside AM antenna, keep the indoor AM loop connected.
3
AM Loop Antenna
Turn the loop until you have the best reception
Snap the tabs on the loop into the slots of the base to attach the AM Loop.
4
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 4 97.7.15, 6:05 PM
CAUTION: Make all connections before plugging the Unit into an AC power outlet.
Connecting the Speakers (CA-D501T)
Please refer to instructions for speakers as well when you connect speakers.
For each speaker, connect one end of the speaker wire to the speaker terminals on the back of the
CA-D501T and the other end to the speaker.
1. Open each of the terminals and insert the speaker wires firmly (be sure to remove the insulation at the end of each wire first), then close the terminals.
2. Connect the red (+) and black (–) terminals of the right side speaker to the red (+) and black (–) terminals marked RIGHT on the CA-D501T.
Connect the red (+) and black (–) terminals of the left side speaker to the red (+) and black (–) terminals marked LEFT on the CA-D501T.
SPEAKERS
RIGHT LEFT
Right speaker Left speaker
IMPORTANT: Use speakers with the correct impedance only. The correct impedance is indicated on the back panel.
CAUTION: If a TV is installed near speakers, the TV may display irregular colours. In this case, set the speakers away from the TV.
Connecting the Speakers (MX-D401T/
MX-D301T)
Please refer to instructions for speakers as well when you connect speakers.
For each speaker, connect one end of the speaker wire to the speaker terminals on the back of the System.
1. Open each of the terminals and insert the speaker wires firmly, then close the terminals.
2. Connect the red (+) and black (–) terminals of the right side speaker to the red (+) and black (–) terminals marked RIGHT on the System.
Connect the red (+) and black (–) terminals of the left side speaker to the red (+) and black (–) terminals marked LEFT on the System.
SP-D401/SP-D311 RIGHT
SP-D401/SP-D311 LEFT
SPEAKERS
RIGHT LEFT
IMPORTANT: Use speakers with the correct impedance only. The correct impedance is indicated on the back panel.
CAUTION: If a TV is installed near speakers, the TV may display irregular colours. In this case, set the speakers away from the TV.
5
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 5 97.7.15, 6:05 PM
Connecting Auxiliary Equipment
VCR or other equipment
To listen to this source, press the AUX button.
RIGHT LEFT
AUX
Now you can plug the AC power cord into the wall outlet, and your System is at your command!
COMPU PLAY
COMPU PLAY is JVC’s feature that lets you control the most frequently used functions of the System with a single touch.
One Touch Operation starts playing a CD, turns on the radio, plays a tape, etc. with a single press of the play button for that function. What One Touch Operation does for you is to turn the power on, then start the function you have specified. If the Unit is not ready, such as no CD or tape in place, the Unit still powers on so you can insert a CD or tape.
How One Touch Operation works in each case is explained in the section dealing with that function.
The COMPU PLAY buttons are:
On the Unit
CD
‹/8 button
CD Player DISC-1 to DISC-3 buttons
CD Player Open/Close (
0) buttons
FM/AM button
¤ TAPE ‹ button
AUX button
On the Remote Control
FM/AM button
AUX button
CD control
£/8 button
CD control DISC 1 to DISC 3 buttons
CD control Open/Close (
0) buttons
Deck control
™, £ buttons
6
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 6 97.7.15, 6:05 PM
Common Operations
STANDBY
indicator
POWER
PHONES
DISC
DISC
DISC
COMPACT
DIGITAL AUDIO
3 DISC
TRIPLE TRAY PLAY & EXCHANGE SYSTEM
REPEAT
RANDOM
CONTINUE
STANDBY
POWER
SENSOR
PHONES MIC 1
MULTI CONTROL
MIC 2 MIC LEVEL
P. DOWN P. UP
DUBBING REC CD REC START
START/STOP
DECK A/B REVERSE MODE
MIN MAX
VOLUME
FM
/AM
CD
TAPE
AUX
SOUND
MODE
ACTIVE
BASS EX.
SOUND MODE
ACTIVE BASS EX.
VOLUME
AUX
A
PLAY
AUTO REVERSE AUTO REVERSE
REC/PLAY
B
EJECT EJECT
FULL-LOGIC CONTROL
AUTO TAPE SELECTOR
ACTIVE
BASS EX.
SOUND
MODE
1
CLOCK
4
2
TIMER
5
– SELECT +
7 8
3
6
POWER
SLEEP
ECHO
10
9
SHIFT
SET
10 FM MODE
FM/AM
DISC
DISC
DISC
PLAY MODE AUX
7
/CLEAR
C D
£
/
8
A
REC PAUSE
B
DECK
VOLUME
SOUND
MODE
ACTIVE
BASS EX.
RM-SED50TXU
REMOTE CONTROL
POWER
AUX
VOLUME –, +
Display
Source, Sound Mode Volume Level etc.
CONT.
RANDOM
ALL PRGM CLOCK kHz
MHz
A.BASS EX S.MODE
REC SLEEP MONO
ST
ACTIVE BASS EX. indicator
SOUND MODE indicator
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
POWER
or
POWER
Turning the Power On and Off
Turning the System On ——————————————————
Press the POWER button.
The display comes on and the STANDBY indicator goes out.
The System comes on ready to continue in the mode it was in when the power was last turned off.
o If the last thing you were doing was listening to a tape in Deck B, you are now ready to listen to a tape again in Deck B, or you can change to another source.
o If you were listening to the Tuner last, the Tuner comes on playing the station it was last set to.
Turning the System Off ——————————————————
Press the POWER button again.
The STANDBY indicator lights up and the display is blank, except for the clock display.
o Some power (12 watts) is always consumed even though power is turned off (called Standby Mode).
o To switch off the Unit completely, unplug the AC power cord from the AC outlet. When you unplug the AC power cord, the clock will be reset to 0:00 immediately, and preset Tuner stations will be erased after a few days.
7
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 7 97.7.15, 6:05 PM
Adjusting the Volume
Turn the VOLUME control clockwise to increase the volume or anticlockwise to decrease it.
Turning the VOLUME control quickly also adjusts the volume level quickly.
When using the Remote Control, press the VOLUME + button to increase the volume or press the
VOLUME – button to decrease it.
You can adjust the volume level between 0 and 50.
VOLUME or
VOLUME
CAUTION: The Volume cannot be adjusted while the Unit is in STANDBY mode. DO NOT turn on the Unit and/or start playing any source without setting the VOLUME control to 0; otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones.
For private listening
Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers.
Be sure to turn down the volume before connecting or putting on headphones.
SOUND
MODE
ACTIVE
BASS EX.
or
ACTIVE
BASS EX.
Reinforcing the Bass Sound
The richness and fullness of the bass sound is maintained regardless of how low you set the volume.
You can use this effect only for playback.
To get the effect,
press the ACTIVE BASS EX. (Active Bass Extension) button.
The frame around the “A. BASS EX” indicator lights up.
A.BASS EX
To cancel the effect,
press the button again.
The frame around the “A. BASS EX” indicator goes out.
A.BASS EX
Sound Modes
SOUND
MODE
ACTIVE
BASS EX.
or
SOUND
MODE
The System has some preset sound effects that give you control of the way your music sounds, so you can tailor it for your room and for the quality of the source. We can give you some idea of how each one affects the music, but the only way to really tell is to try them yourself.
o The preset sound modes include modes using surround effects and modes using S.E.A. effects.
o Sound Mode effects cannot be recorded.
Surround effect modes
D. CLUB (Dance Club)
HALL
STADIUM
Increases resonance and bass.
Adds depth and brilliance to the sound, like in a concert hall.
Adds clarity and spreads the sound, like in an outdoor stadium.
S.E.A. effect modes
ROCK
CLASSIC
POP
Boosts low and high frequencies.
Set for wide and dynamic sound stereo systems.
Good for vocal music.
KARAOKE mode
KARAOKE
The vocal on tapes or CDs is masked for karaoke.
To get an effect,
press the SOUND MODE button repeatedly until the Sound Mode you want appears in the display. The frame around the “S.MODE” indicator lights up.
Each time you press the SOUND MODE button, the display changes as shown below:
S.MODE
=
D. CLUB
=
HALL
=
STADIUM
=
ROCK
=
CLASSIC
=
POP
=
KARAOKE
=
FLAT
=
(back to the beginning)
To cancel an effect,
press the SOUND MODE button until “FLAT” appears on the display. The frame around the “S. MODE” indicator goes out.
To recall the previous Sound Mode,
press the SOUND MODE button again.
8
Downloaded From DvDPlayer-Manual.com JVC Manuals
S.MODE
CA-D301/401/501T[U]/EN 8 97.7.15, 6:06 PM
FM
/AM
CD
TAPE
AUX or
AUX
Listening to Auxiliary Equipment
By playing the sound from auxiliary equipment through the System, you can gain control over how the music or program sounds. Once the connected equipment is playing through the System, you can apply the sound effects.
o First make sure that the optional equipment is properly connected to the System. (See page 5).
1. Set the VOLUME control to 0.
2. Press the AUX button.
When System is in Standby mode, the Unit is automatically turned on and “AUX” appears on the display.
3. Start playing the equipment.
4. Adjust the VOLUME control to the desired listening level.
5. Select a sound effect mode, if you wish.
To Cancel the Setting
Change the source by starting any one of the System’s built-in sound sources, such as the Tuner or CD
Player.
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 9 97.7.15, 6:06 PM
9
Using the Tuner
TUNING UP
TUNING DOWN
DISC
DISC
DISC
3
DISC
TRIPLE TRAY
COMPACT
DIGITAL AUDIO
PLAY & EXCHANGE SYSTEM
REPEAT
RANDOM
CONTINUE
STANDBY
POWER
SENSOR
PHONES
MULTI CONTROL
TUNING
DOWN
MIC 1
TUNING
UP
MIC 2 MIC LEVEL
P. DOWN P. UP
DUBBING REC CD REC START
START/STOP
DECK A/B REVERSE MODE
MIN MAX
VOLUME
FM
/AM
CD
TAPE
AUX
SOUND
MODE
ACTIVE
BASS EX.
4
P.DOWN
¢
P.UP
FM/AM
Number keys
1
CLOCK
4
– SELECT +
7
ECHO
10
2
TIMER
5
8
3
6
9
POWER
SLEEP
SHIFT
SET
10 FM MODE
FM/AM
DISC
PLAY MODE AUX
DISC
DISC
7
/CLEAR
£
/
8
C D
A
REC PAUSE
B
DECK
VOLUME
SOUND
MODE
ACTIVE
BASS EX.
RM-SED40TEU
REMOTE CONTROL
FM/AM
FM MODE
A
PLAY
AUTO REVERSE AUTO REVERSE
REC/PLAY
B
EJECT EJECT
FULL-LOGIC CONTROL
AUTO TAPE SELECTOR
Display
Band display, Frequency display, Preset channel
CONT.
RANDOM
ALL PRGM CLOCK kHz
MHz
A.BASS EX S.MODE
REC SLEEP MONO
ST
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
P. DOWN
POWER
P. UP
You can listen to both FM and AM stations. Stations can be tuned in manually, automatically, or from preset memory storage.
o Before listening to the radio:
• Check that both the FM and AM antennas are firmly connected. (See page 4).
Setting the AM Tuner Interval Spacing ——————————
Some countries space AM stations 9 kHz apart, and some countries use 10 kHz spacing. Europe, the U.K.,
Australia, and some other areas use 9 kHz spacing, while Canada, the United States, and some other
Western Hemisphere countries use 10 kHz spacing.
❏ When shipped, the System is set to 9 kHz spacing.
In case of Brazil, the System is set to 10 kHz spacing.
❏ To select the 10 kHz interval, be sure that the Unit is in STANDBY mode. Turn on by pressing the
POWER button while pressing the TUNING UP button on the Unit. “AM --10” appears on the display.
❏ To change back to 9 kHz, be sure that the Unit is in STANDBY mode. Turn on by pressing the
POWER button while pressing the TUNING DOWN button on the Unit. “AM -- 9” appears on the display.
One Touch Radio ——————————————————————
Just press the FM/AM button to turn on the Unit and start playing the most recent station tuned in.
o You can switch from any other sound source to the radio by pressing the FM/AM button.
10
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 10 97.7.15, 6:06 PM
Tuning In a Station
FM
/AM
CD
TAPE
TUNING
DOWN
P. DOWN
Press the FM/AM button to turn on the radio.
The Frequency of the previously selected channel appears on the display.
AUX
TUNING
UP
or
FM/AM
Switching between Frequency Bands ———————————
Press the FM/AM button.
Each time you press the button, the band alternates between FM and AM.
P. UP
Three ways to select a station ——————————————
o Press the TUNING DOWN or TUNING UP button repeatedly to move from frequency to frequency until you find the one you want. (Manual Tuning).
OR o Press and hold the TUNING DOWN or TUNING UP button for a few seconds, the frequency starts changing on the display. When a station is tuned in, the frequency stops changing. (Auto Tuning).
OR o Possible only after presetting stations.
Press once and release the
4 P. DOWN or ¢ P. UP button to go to the next preset station.
You can also use the Remote Control to tune in preset channels:
1. Press the FM/AM button so that you can receive the most recent station tuned in.
2. Select the station by entering the preset number in the number keys of the Remote Control.
• Example: for channel 5, press 5. For channel 15, press +10 then 5. For channel 20, press +10, then 10. For channel 30, press +10 twice then 10.
• After you have selected the preset number and the number is displayed, the broadcast frequency of the selected channel is displayed.
Presetting Stations
1
2
3
FM
/AM
CD
TAPE
P. DOWN
1
CLOCK
4
2
TIMER
5
– SELECT +
7 8
ECHO
10
SET
10
AUX
6
9
3
You can preset up to 30 FM stations and up to 15 AM stations for the preset numbers.
Note:
In some cases, test frequencies have been already memorized for the tuner since the factory examined the tuner preset function before shipment. This is not a malfunction. You can preset the stations you want into memory by following the presetting method.
or
FM/AM
1. Select a band by pressing either the FM/AM button.
2. Press the TUNING DOWN or TUNING UP button to tune into a station.
P. UP
3. Setting the preset number by pressing the number keys on the
Remote Control continuously.
For preset numbers 1 to 10:
Press the number key for the preset number you want to set.
For preset numbers 11 to 20:
Press the 1 to 10 buttons after pressing the +10 button.
For preset numbers 21 to 30:
Press the 1 to 10 buttons after pressing the +10 button twice.
The preset number appears in the display after you have pressed the number keys. If the key is pressed continuously, the preset number display blinks. Release the button after the number starts to blink. This completes the preset setting.
4. Repeat steps 1 - 3 for each station you want to store in memory with a preset number.
CAUTION: If the Unit is unplugged or if a power failure occurs, the preset stations will be erased after a few days. If this happens, preset the station again.
FM MODE
To Change the FM Reception Mode
When an FM stereo broadcast is hard to receive or noisy, press the FM MODE button on the Remote Control so that the “MONO” indicator lights up in the display. Reception improves, but there is no stereo effect.
To restore the stereo effect,
press the FM MODE button on the Remote Control so that the “MONO” indicator goes off. In this stereo mode, the “ST” indicator lights up and you can hear stereo effects, when a program is broadcast in stereo.
11
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 11 97.7.15, 6:06 PM
Using the CD Player
Number keys
1
CLOCK
4
2
TIMER
5
3
6
POWER
SLEEP
– SELECT +
7 8
ECHO
10
9
SHIFT
SET
10
FM MODE
FM/AM
DISC
DISC
DISC
PLAY MODE
AUX
7
/CLEAR
C D
£
/
8
A
REC PAUSE
B
DECK
VOLUME
SOUND
MODE
ACTIVE
BASS EX.
RM-SED50TXU
REMOTE CONTROL
CD Player control buttons
Disc Trays
0
DISC
buttons
DISC
DISC
DISC
COMPACT
DIGITAL AUDIO
3
DISC
TRIPLE TRAY
PLAY & EXCHANGE SYSTEM
REPEAT
RANDOM
CONTINUE
STANDBY
POWER
SENSOR
PHONES
MULTI CONTROL
TUNING
DOWN
MIC 1
TUNING
UP
MIC 2 MIC LEVEL
P. DOWN P. UP
DUBBING REC CD REC START
START/STOP
DECK A/B REVERSE MODE
MIN MAX
VOLUME
FM
/AM
CD
TAPE
AUX
SOUND
MODE
ACTIVE
BASS EX.
REPEAT
RANDOM
CONTINUE
4
P.DOWN
7
¢
P.UP
CD
‹
/
8
A
PLAY
AUTO REVERSE AUTO REVERSE
REC/PLAY
B
EJECT EJECT
FULL-LOGIC CONTROL
AUTO TAPE SELECTOR
Display
Disc display Track number, Playing time, step number
Repeat indicator
CONT.
RANDOM
ALL PRGM CLOCK kHz
MHz
A.BASS EX S.MODE
REC SLEEP MONO ST
Play mode indicator
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
Disc marker
Disc display
A red marker lights on the disc display for the disc number you have selected. This disc display blinks while a CD is being played.
The centre of the disc display is not lit while CD Player is checking that there is no disc in the disc tray for the corresponding disc number.
The System’s CD Player has an Automatic Changer with 3 disc trays. You can use Continuous, Random,
Program or Repeat Play for the discs in DISC-1, DISC-2 and DISC-3. Repeat Play can repeat all the tracks on all the CD’s, the tracks on one of the CD’s or one track on one CD. There is also the Tray Lock function, which safely keeps discs in the trays.
Here are the basic things you need to know to play a CD and locate the different selections on it. Each selection is called a track, so when we are talking about locating a track, we are also talking about how you find a certain song or performance.
12
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 12 97.7.15, 6:06 PM
or
The Quickest Way To Start a CD Is With the One Touch
Operation —————————————————————————
Press the CD
‹ /8 button (or the £/8 button on the Remote Control).
For Normal Play (Play mode indicator is not lit):
• If there is a CD in the disc tray for the selected disc number, the power is automatically turned on and the CD is played from the first track.
• If there is no CD in the disc tray for the selected disc number, the power is automatically turned on and “NO DISC” appears on the display. The CD Player is in stop mode.
For Continuous Play or Random Play in Display mode
(CONT. or RANDOM indicator is lit):
• If there is a CD in the disc tray for the selected disc number, the power is automatically turned on and the CD is played continuously from the first track or the tracks are played in random order.
• If there is no CD in the disc tray for the selected disc number, the power is automatically turned on and other tray containing a CD is selected and is played continuously from the first track or the tracks are played in random order.
• If there are no CDs in CD player, the power is automatically turned on and “NO DISC” appears on the display in Normal Play mode. The CD Player is in stop mode.
Press a DISC button (1 to 3).
• If there is a CD in the disc tray for the selected disc number, the power is automatically turned on and playback starts from the selected CD.
• If there are no CDs in CD Player, the power is automatically turned on and “NO DISC” appears on the display in Normal Play mode. The CD Player is set to stop mode.
o Press the
0 button.
• The power turns on, and the tray opens automatically.
To Insert Discs
1. Press the
0 button on the left of the Disc button you want to insert
the disc into.
The disc tray slides out automatically.
2. Place a CD, with its label side up, onto the tray.
ATTENTION:
To avoid malfunctions when you play a CD, please set the CD in the right place at the centre of the tray.
CD
Tray
CORRECT INCORRECT
3. Press the
0 button to close the tray.
4. Repeat steps 1 to 3 to insert other discs into other trays.
• To continue putting discs into other trays, even if a tray is open, by pressing the
0 button of another disc tray, the open tray will close automatically, and the new disc tray will slide out.
o To put an 8 cm CD into a tray, insert it so that it is aligned with the groove in the tray’s centre.
If a tray is open when the System switches to Standby mode, the tray is closed automatically.
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 13 97.7.15, 6:06 PM
13
FM
/AM
CD
TAPE
AUX
P. DOWN P. UP
or
DISC
DISC
DISC
1
CLOCK
4
2
TIMER
5
– SELECT +
7 8
ECHO
10
SET
10
3
6
9
Basics of Using the CD Player —
Normal Play
To Play a Disc ———————————————————————
1. Prepare the discs.
2. Press the CD
‹/8 or DISC button (1-3) of the disc you want to play.
When using the Remote Control, press the
£/8 button or the DISC (1 to 3) buttons.
The first track of the selected disc will begin playing.
The CD Player automatically stops when the playback finishes the last track of the CD.
• If these buttons are pressed while the tray is open, the tray is automatically closed and playback starts.
Note:
If the CD cannot be read correctly (due to scratches etc.), “00 0000” appears on the display.
To stop playing the disc,
press the
7 button (or the 7/CLEAR button on the Remote Control).
To stop playing and removing the disc,
press the
0 button for the disc being played.
To pause,
press the
‹/8 button (or the £/8 button on the Remote Control). The Disc display will blink.
To cancel pause,
press the
‹/8 button again (or press the £/8 button on the Remote Control). Play continues from the point where it was paused.
To Select a Disc, Track Or Passage Within a Track ———
1. Press the DISC button (1-3) for the disc tray containing the track you want to listen to.
• Example: for the third disc, press 3.
2. Press the
4 P.DOWN or ¢ P.UP button to select the track.
The selected track starts playing.
Each time you briefly press and release the
4 P.DOWN or ¢ P.UP button, the track changes by one.
• Press and release the
¢ P.UP button to go ahead one track at a time.
• Press and release the
4 P.DOWN button to go back one track at a time.
Holding down the
4 P.DOWN or ¢ P.UP button, during playback, will fast forward/backwards the CD so you can quickly find a particular passage in the selection you are listening to.
When using the Remote Control, press the
4 or ¢ button.
Locating a Track With the Remote Control Directly ———
Using the number keys on the Remote Control allows you to go directly to the beginning of any track.
1. Press the DISC button (1-3) for the disc tray containing the track you want to listen to.
• Example: for the third disc, press 3.
2. Enter the number of the track you want to listen to with the number keys.
The selected track starts playing.
• Example: for track 5, press 5. For track 15, press +10 then 5. For track 20, press +10, then 10. For track 32, press +10 three times, then 2.
To Change Discs While Playing ——————————————
You can replace a CD in a tray not being used, while another CD is playing.
1. Press the
0 button of the tray not being used.
The tray opens.
2. Replace the disc in the tray.
3. Press the
0 button to close the tray.
14
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 14 97.7.15, 6:06 PM
DISC
DISC
DISC
CONTINUE
PLAY MODE
DISC
DISC
DISC
or
£
/
8
PLAY MODE
Continuous Play
This function plays the disc in the Unit continuously.
1. Prepare the discs.
2. Select Continuous mode.
On the Unit
Press the CONTINUE button.
The playback automatically starts from the selected CD.
• “CONT.” on the Play mode indicator lights up.
You can press the CONTINUE button while a CD is playing to switch to Continuous mode.
On the Remote Control
1. Press the PLAY MODE button while the CD Player is stopped, to select
“CONTINUE”.
• “CONT.” lights in the Play mode indicator.
The display changes with each press of the
PLAY MODE button as shown below.
CONT.
A.BASS EX S.MODE
=
PROGRAM
=
RANDOM
=
CONTINUE
= No display = (back to the beginning)
2. Press the DISC button (1 to 3) or
£/8 button.
Playback starts from the selected CD.
Playing order of the CDs
The selected CDs are played continuously in the following order.
=
DISC 1
=
DISC 2
=
DISC 3
= (back to the beginning)
To cancel Continuous play,
press the CONTINUE button again. The “CONT.” indicator on the display goes out and Normal Play is resumed. When using the Remote Control, press the PLAY MODE button while the CD Player is stopped to select a different Play mode. The “CONT.” indicator goes out and the next Play mode is selected.
Programming the Playing Order of the
Tracks
You can change the order in which the discs and tracks play, and select only the discs and tracks you want from among those loaded in the CD Player.
o You can program up to 20 steps in any desired order from among the discs in the player.
o You can only make a program when the CD Player is stopped.
Use the Remote Control.
1. Press the PLAY MODE button to select “PROGRAM”.
The display changes with each press of the PLAY
MODE button as shown below.
PRGM
A.BASS EX S.MODE
=
PROGRAM
=
RANDOM
=
CONTINUE
= No display = (back to the beginning)
• The “PRGM” play mode indicator light up.
• If a program is already in progress, the last step of the program is displayed.
2. Select a disc with the DISC buttons (1-3).
The display changes to the Program Entry display.
Track number
Disc number
Step number
A.BASS EX S.MODE
PRGM
15
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 15 97.7.15, 6:07 PM
1
CLOCK
4
2
TIMER
5
– SELECT +
7
8
ECHO
10
SET
10
3
6
9
3. Press the number keys (1 to 10 and
+10) to select the track to program.
• Example: for track 5, press 5. For track 15, press +10 then 5. For track 20, press +10 then 10.
PRGM
A.BASS EX S.MODE
RANDOM
PLAY MODE
£
/
8
4. Repeat steps 1 to 3 to select the other tracks for the program.
5. Press the
£/8 button.
The Unit plays the tracks in the order you have programmed them.
o If you try to program a disc tray that is empty, or a track number that does not exist on a disc (for example, selecting track 14 on a disc that only has 12 tracks), the selected disc or track are skipped when the program is played.
o You can skip to a particular program step by pressing the
4 or ¢ button during program play.
o To play the programmed tracks over and over, press the REPEAT button . The Repeat mode indicators light up in sequence with each press of the REPEAT button.
To stop playing,
press the
7 button (or the 7/CLEAR button on the Remote Control) once.
To delete all the tracks in a program,
press the
7 button on the Unit or the 7/CLEAR button on the
Remote Control while the CD Player is stopped. The program is deleted and the “PRGM” play mode indicator goes out and Normal Play is resumed.
To cancel program play,
press the PLAY MODE button on the Remote Control while the CD Player is stopped to select a different Play mode. The “PRGM” indicator goes out and the next Play mode is selected.
Note:
If you press the CONTINUE or RANDOM button on the unit while a program is playing, the play mode changes to that mode.
Random Play
The tracks will play in no special order when you use this mode.
On the Unit
Press the RANDOM button.
The playback automatically starts from the selected CD.
• “RANDOM” on the Play mode indicator lights up.
You can press the RANDOM button while a CD is playing to switch to Random play mode.
On the Remote Control
1. Press the PLAY MODE button while the CD Player is stopped, to select
“RANDOM”.
A.BASS EX
RANDOM
• “RANDOM” lights in the Play mode indicator.
The display changes with each press of the PLAY MODE button as shown below.
S.MODE
=
PROGRAM
=
RANDOM
=
CONTINUE
= No display = (back to the beginning)
2. Press the
£/8 button.
Playback starts from the selected CD.
Note:
Random Play cannot be activated with the DISC button (1 to 3).
To skip to the next track,
press the
¢ button during playback. The next track is jumped to with each press of the button. Press the
4 button to jump to the start of the track being played.
Press the REPEAT button before or during random play to instruct the System to continue with a different random track selection after the last selection is played.
To cancel random play,
press the RANDOM button again. The “RANDOM” play mode indicator goes out and Normal Play is resumed. When using the Remote Control, press the PLAY MODE button while the CD Player is stopped to select a different Play mode. The “RANDOM” indicator goes out and the next Play mode is selected.
16
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 16 97.7.15, 6:07 PM
P. DOWN
REPEAT
P. UP
Repeating a Selection or the Discs
You can have all the discs, the program or the individual selection currently playing repeat as many times as you like.
Press the REPEAT button.
The display changes with each press of the button, as shown below.
= =
ALL
= blank display = (back to the beginning)
: Repeats one track on a CD.
ALL
: For Normal Play, repeats all the tracks on the current CD.
For Continuous Play or Random Play, repeats all the tracks on all the CDs in the CD
Player.
For Program Play, repeats all the tracks in the program.
To exit Repeat Mode,
press the REPEAT button until the Repeat mode indicator on the display goes out.
Tray Lock Function
In order to safely keep the discs in the CD Player, the three trays can be electronically locked in a single operation.
When the electronic lock is on, the trays cannot be opened even if the
0 button is pressed.
This function can only be accessed by using the buttons on the Unit itself.
Locking the Electronic Lock ———————————————
1. Put the System’s power into STANDBY mode.
2. While pressing the
7 button, press the 0 button for DISC 1’s tray on
the Unit.
“LOCK ON” appears on the display to let you know that the trays have been locked.
When the CD Player trays are locked, pressing the
0 buttons displays the message “LOCK ON” on the display and the trays do not open. Also, the
0 button cannot be used to automatically turn on the power.
Unlocking the Electronic Lock ——————————————
1. Put the System’s power into STANDBY mode.
2. While pressing the
7 button, press the 0 button for DISC 1’s tray on
the Unit.
When the unlock operation is done, “LOCK OFF” appears in the display to show that the lock has been taken off.
The trays can now be opened by pressing the
0 buttons.
The
0 button can also be used to automatically turn on the power.
17
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 17 97.7.15, 6:07 PM
Using the Cassette Deck
(Listening to a Tape)
1
CLOCK
4
– SELECT +
7
ECHO
10
2
TIMER
5
8
3
6
9
POWER
SLEEP
SHIFT
SET
10 FM MODE
FM/AM
DISC
PLAY MODE
AUX
DISC
DISC
7
/CLEAR
C D
£
/
8
A
REC PAUSE
B
DECK
VOLUME
SOUND
MODE
ACTIVE
BASS EX.
RM-SED50TXU
REMOTE CONTROL
Cassette Deck control buttons
DISC
DISC
DISC
COMPACT
DIGITAL AUDIO
3
DISC
TRIPLE TRAY
PLAY & EXCHANGE SYSTEM
REPEAT
RANDOM
CONTINUE
STANDBY
POWER
SENSOR
PHONES
MULTI CONTROL
TUNING
DOWN
MIC 1
TUNING
UP
MIC 2 MIC LEVEL
P. DOWN P. UP
DUBBING REC CD REC START
START/STOP
DECK A/B REVERSE MODE
MIN MAX
VOLUME
FM
/AM
CD
TAPE
AUX
SOUND
MODE
ACTIVE
BASS EX.
4
P.DOWN
7
¢
P.UP
¤
TAPE
‹
REVERSE MODE
DECK A/B
A
PLAY
AUTO REVERSE AUTO REVERSE
REC/PLAY
B
EJECT EJECT
FULL-LOGIC CONTROL
AUTO TAPE SELECTOR
0
EJECT
(Deck A)
0
EJECT
(Deck B)
Display
CONT.
RANDOM
ALL PRGM CLOCK kHz
MHz
A.BASS EX
S.MODE
REC SLEEP MONO
ST
: Tape Direction indicator
: DECK A, B indicator
: Reverse Mode indicator
Tape Direction Indicator on the Display
The Tape Direction indicator tells you which direction the selected tape deck will use for playback.
During playback, the direction indicator blinks slowly.
During fast left or fast right, the indicator blinks quickly.
During Music Scan mode, the direction indicator alternates between blinking slowly and quickly repeatedly.
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
The Cassette Deck allows you to play, record and dub audio tapes.
o With Automatic Tape Detection, you can listen to type I or II tapes without changing any settings.
The use of tapes longer than 120 minutes is not recommended, since characteristic deterioration may occur and these tapes easily jam in the pinch-rollers and the capstans.
One Touch Play ——————————————————————
By pressing the
¤ TAPE ‹ button (or the 2 or 3 button on the Remote Control), the Unit will come on, “TAPE” appears in the display, and if a tape is in the deck, it will start to play. If no tape is loaded, the
Unit will come on and wait for you to insert a tape, or select another function.
Regular Play
EJECT EJECT
When the power is already on, you can use this basic procedure:
1. Press the
0 EJECT button for the deck you want to use.
2. When the cassette holder opens, put the cassette in, with the exposed part of the tape down, toward the base of the System.
• If the cassette holder does not open, turn the Unit off, then back on and press the
0 EJECT button again.
18
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 18 97.7.15, 6:07 PM
P. DOWN
P. DOWN
FM
/AM
CD
TAPE
AUX
DECK A/B REVERSE MODE
P. UP
P. UP
3. Close the holder gently.
When both Deck A and Deck B contain a tape, the last deck to have a tape inserted is selected.
To change the selected deck, press the DECK A/B button. When using the Remote Control, press the
A or B button.
4. Press the
¤ TAPE ‹ button (or ™ or £ button on the Remote
Control).
The tape is played in the direction of the button pressed for the selected deck.
• The Cassette Deck automatically stops when one side of a tape has finished playing.
To stop playing,
press the
7 button.
To remove the tape,
stop the tape, and press the
0 EJECT button.
To change deck while playing a tape,
press the
¤ TAPE ‹ button after pressing the DECK A/B button on the Unit or press the
™ or £ button after pressing the A or B button on the Remote Control.
Fast Left And Fast Right——————————————————
o While the tape is stopped, press the
4 P.DOWN button (or 1 button on the Remote Control) and the tape will wind rapidly onto the left side of the cassette without playing.
o While the tape is stopped, press the
¢ P.UP button (or ¡ button on the Remote Control) and the tape will wind rapidly onto the right side of the cassette without playing.
Note:
Deck A and Deck B cannot be used for playback at the same time.
Music Scan
To find the beginning of a music track during play, use the Music Scan function. Music Scan searches for blank portions that usually separate selections, then plays the next selection.
To Find the Beginning of the Current Selection ——————
Press the
4 P.DOWN or ¢ P.UP button (or the 1 or ¡ button on
the Remote Control) during play.
o Make sure that you press the
4 P.DOWN or ¢ P.UP button (or the 1 or ¡ button on the
Remote Control) in the opposite direction to that in which the tape is playing. Searching stops at the beginning of the current selection, and the current selection starts automatically.
To Find the Beginning of the Next Selection ———————
Press the
4 P.DOWN or ¢ P.UP button (or the 1 or ¡ button on
the Remote Control) during play.
o Make sure that you press the
4 P.DOWN or ¢ P.UP button (or the 1 or ¡ button on the
Remote Control) in the same direction as that in which the tape is playing. Searching stops at the beginning of the next selection, and the next selection starts automatically.
Music Scan works by detecting a 4-second long blank at the beginning of each selection, so it won’t work well if your tape has:
• No blank at the beginning of a selection .
• Noise (often caused by much use or poor quality dubbing) which fills the blank with noise.
• Long, very soft passages or pauses in a selection. The scan will detect these as 4-second long blanks. If this happens, just scan again until you reach the selection you want.
DECK A/B REVERSE MODE
Reverse Mode
You can play both sides of a cassette, or play both the tapes in the two Cassette Decks continuously.
Press the REVERSE MODE button to switch to Reverse Mode.
The indicator changes with each press of the button as shown.
= = = = (back to the beginning)
: The Cassette Deck automatically stops after playing one side of the tape.
: The Cassette Deck automatically stops after playing both sides of the tape being played (or set to play).
: After playing both sides of the tape being played (or set to play), the Unit always checks to see if a tape is in the other deck. If there is, it automatically starts playing that tape. This
Continuous Play function works regardless of which deck starts first. The tapes are played continuously until the
7 button is pressed.
19
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 19 97.7.15, 6:07 PM
Using the Cassette Deck
(Recording)
REC PAUSE
1
ECHO
10
2
CLOCK
4
TIMER
5
– SELECT +
7 8
SET
10
3
6
9
POWER
SLEEP
SHIFT
FM MODE
FM/AM
DISC
DISC
DISC
PLAY MODE AUX
7
/CLEAR
C D
£
/
8
A
REC PAUSE
B
DECK
VOLUME
SOUND
MODE
ACTIVE
BASS EX.
RM-SED50TXU
REMOTE CONTROL
DISC
DISC
DISC
COMPACT
DIGITAL AUDIO
3
DISC
TRIPLE TRAY
PLAY & EXCHANGE SYSTEM
REPEAT
RANDOM
CONTINUE
STANDBY
POWER
SENSOR
PHONES
MULTI CONTROL
TUNING
DOWN
MIC 1
TUNING
UP
MIC 2 MIC LEVEL
P. DOWN P. UP
DUBBING REC CD REC START
START/STOP
DECK A/B REVERSE MODE
MIN MAX
VOLUME
FM
/AM
CD
TAPE
AUX
SOUND
MODE
ACTIVE
BASS EX.
CD REC START
REC START/STOP
DUBBING
A
PLAY
AUTO REVERSE AUTO REVERSE
REC/PLAY
B
EJECT EJECT
FULL-LOGIC CONTROL
AUTO TAPE SELECTOR
20
Display
CONT.
RANDOM
ALL PRGM CLOCK kHz
MHz
A.BASS EX S.MODE
REC SLEEP MONO
ST
REC indicator
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
Recording onto a cassette from any of the sound sources is simple. Just place a tape in Deck B, have the source ready, make one or two settings, and you’re ready to record. For each source the procedure is a little bit different and now we’ll explain just what to do for each one. If you forget, just come back to the section which has the specific procedures you need. But first, here are a few things to make your recordings better.
Things To Know Before You Start Recording ———————
o
It may be unlawful to record or play back copyrighted material without the consent of the copyright owner.
o When you want to record onto both sides of a tape, you can set Reverse mode on to do so. However, recording automatically stops after recording in the
2 direction in Reverse mode. Therefore, make sure that the tape direction is
3 when recording with Reverse mode on.
o The recording level, which is the volume at which the new tape is being made, is automatically set correctly, so it is not affected by the VOLUME control on the System. Thus, during recording you can adjust the sound you are actually listening to without affecting the recording level.
o Two small tabs on the back of the cassette tape, one for side A and one for side B, can be removed to prevent accidental erasure or re-recording. To record on a cassette with the tabs removed, you must cover the holes with adhesive tape first.
However, when a type II tape is used, only cover part of the hole as shown, since the other part of the hole is used to detect the tape type.
o When recording, you can hear Sound Mode effects through the speakers or headphones. However, the sound is recorded without Sound Mode effects.
o Type I and Type II tapes can be used for recording.
20
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 97.7.15, 6:08 PM
Note:
At the start and end of cassette tapes, there is leader tape which cannot be recorded onto. Depending on the recording source, the first part of the recording may be missing because of the leader. When recording CDs or radio broadcasts, to get the beginning of the recording on the tape, first wind on the leader before beginning recording.
CAUTION: If recordings you have made have excessive noise or static, the Unit may be too close to a TV which was on during the recording.
Either turn off the TV or increase the distance between the TV and the
System.
Standard Recording
This is the basic method for recording any source. The System also has special ways for recording CD to tape, and tape to tape, which save you time and effort, as well as give you some special effects. However, when you need to add a selection to a tape you have made, or are combining selections from several sources on one tape, use the method described below; just substitute the source you want into this procedure, such as a tape in Deck A, a CD, or the Tuner. You can also record from auxiliary source with this procedure.
To Record Any Sound Source To Tape ——————————
Follow these steps to record from any sound source onto a tape in Deck B.
REC
START/STOP
Using the Unit
1. Insert a blank or erasable tape into Deck B.
2. Press the REVERSE MODE button if you want to record on both sides of the tape.
Press the button until the “ ” or “ ” indicator is lit.
• When using Reverse Mode, insert the tape so that it will be recorded in the forwards
3 direction.
3. Check the recording direction for the tape.
Check that the Tape Direction indicator is the same as that for the tape in the tape deck. If the directions are different, press the
7 button after pressing the ¤ TAPE ‹ button to set the tape direction.
• When using Reverse Mode to record both sides of a tape, check that the Tape Direction indicator is in the forwards
3 direction. If the direction indicator is not in the forwards 3 direction, press the
¤ TAPE ‹ button then press the 7 button.
4. Prepare the source, by, for example, tuning in a radio station, loading CDs, or turning on connected equipment.
5. Press the REC START/STOP button.
The “REC” indicator light comes on and the System begins recording.
REC PAUSE
Using the Remote Control
1. Insert a blank or erasable tape into Deck B.
2. Press the REC PAUSE button.
The “REC” indicator blinks.
3. Press the REVERSE MODE button on the Unit if you want to record on both sides of the tape.
Press the button until the “ ” or “ ” indicator is lit.
• When using Reverse Mode, insert the tape so that it will be recorded in the forwards
3 direction.
4. Prepare the source by, for example, tuning in a radio station, loading CDs, or turning on connected equipment.
5. Press the
™ or £ button.
Recording starts in the direction of the button pressed.
• When using Reverse Mode to record both sides of a tape, press the
£ button.
Notes for using Reverse Mode for recording
When recording in Reverse Mode, the System automatically stops when it reaches the end of the reverse
2 direction. To record on both sides of a tape, make sure that the recording direction for the tape inserted into Deck B is forwards
3, and that the Tape Direction indicator is also forwards 3, before you start recording.
21
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 21 97.7.15, 6:08 PM
CONTINUE
CD REC START
To Pause at Any Time During the Recording Process
Press the REC PAUSE button on the Remote Control. Then press either the
™ or £ button on the
Remote Control or REC START/STOP button on the Unit to restart recording.
To Stop at Any Time During the Recording Process
Press the REC START/STOP button on the Unit again, or press the
7 button.
Recording AM station to tape
When recording an AM broadcast, beats may be produced which are not heard when listening to the broadcast. In this case, press the CONTINUE button on the CD Player to eliminate the beats.
1.
Set to AM station and start recording.
2.
Press the CONTINUE button to eliminate the beats.
Each time you press the button, the display changes as shown below:
=
CUT 2
=
CUT 3
=
CUT 1
= (back to the beginning)
CD Direct Recording
Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you have set in a program.
1. Prepare CDs. (See page 13.)
Check that the CD Player is not playing a CD.
2. Insert a cassette in Deck B to record on.
• When you want to record on both sides of a tape, press the REVERSE MODE to turn Reverse
Mode on. Check that the recording direction for the tape and the Tape Direction indicator is correct. (See page 21 “Notes for using Reverse Mode for recording”.)
3. Press the CD REC START button.
The “REC” indicator light comes on and the System begins recording.
If you make a recording with Reverse Mode on, the Unit will record the last song at the end of the first side at the beginning of the next side.
To stop at any time during the recording process,
press the
7 button.
Note:
When making SLEEP timer settings while doing CD Direct recording, set the time so that there is enough leeway to finish the recording before the power goes off. If the time is set to about the length of the CD, the power may go off before recording finishes.
For CD Direct Recording using more than one disc, use a blank tape, If you use a prerecorded tape, prerecorded material may not be erased between newly-recorded tracks.
Tape to Tape Recording (Dubbing)
Recording from one tape to another is called dubbing.
You can dub tapes simply, with just a single button.
o When dubbing tapes, make sure that the playback direction of Deck A and Deck B are the same.
o When you want to record both sides of a tape, press the REVERSE MODE button to turn Reverse mode on.
o It is preferable that the type of tape (Type I or Type II) you record from be the same as the type you record onto.
How to Use the DUBBING Button —————————————
DUBBING
1. Insert the source cassette you want to copy from into Deck A for playback.
Insert the cassette so that it will be played in the forwards
3 direction.
2. Insert the blank or erasable cassette you want to copy onto into
Deck B for recording.
Insert the cassette so that it will be recorded in the forwards
3 direction.
3. Press the DUBBING button.
Deck A and Deck B will start simultaneously.
To stop dubbing,
press the
7 button or REC START/STOP button.
o When doing dubbing with the DUBBING button, you can hear Sound Mode effects through the speakers or headphones. However, the sound is dubbed without Sound Mode effects.
22
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 22 97.7.15, 6:08 PM
Using the Timer
2 TIMER
1 CLOCK
4 – SELECT 5 +
8 SET
1
CLOCK
4
2
TIMER
5
– SELECT +
7 8
ECHO
10
SET
10
3
6
9
POWER
SLEEP
SHIFT
FM MODE
FM/AM
DISC
DISC
DISC
PLAY MODE
AUX
7
/CLEAR
C D
£
/
8
A
REC PAUSE
B
DECK
VOLUME
SOUND
MODE
ACTIVE
BASS EX.
RM-SED50TXU
REMOTE CONTROL
SHIFT
Display
Clock, timer-on time etc.
CONT.
RANDOM
ALL PRGM CLOCK kHz
MHz
A.BASS EX S.MODE
REC SLEEP MONO
ST
Timer indicator
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
SHIFT
1
4
CLOCK
5
– SELECT +
8
SET
The timers lets you control listening and recording functions automatically.
Use the Remote Control to set the clock and timers.
Setting the Clock
The timers depend on the clock: the clock must be right for the timers to work as you expect.
You can set the clock whether the Unit is on or off.
Note that the clock must be set, otherwise the timers cannot be set.
1. Press the SHIFT button.
2. Press the 1 CLOCK button.
The “CLOCK” indicator on the display light up and the clock time blinks.
3. Press the SELECT 5 + or 4 – button to set the time.
Pressing the 5 + button increases the time and pressing 4 – decreases the time. Pressing the button continuously advances or decreases the time in 10 minute intervals.
4. Press the 8 SET button.
The blinking time display changes from a blinking display to a steady display and the clock timer starts from 0 seconds.
CAUTION: If there is a power failure, the clock loses its setting. The display shows “0:00”, and the clock must be reset.
23
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 23 97.7.15, 6:08 PM
SHIFT
2
TIMER
4 5
– SELECT +
8
SET
4 5
– SELECT +
8
SET
4 5
– SELECT +
Setting the Timer
o You can set the Timer whether the Unit is on or off.
Procedure For Setting the Timer
1. Press the SHIFT button.
2. Press the 2 TIMER button.
The Timer indicator on the display lights up and the blinking “TIMER ON” changes to the On Time setting display.
\
3. Set the time you want the Unit to come on.
Press the SELECT 5 + or 4 – button to set the On Time.
4. Press the 8 SET button.
“TIMER OFF” blinks on the display, and the display changes to the Off Time setting display.
\
5. Set the time you want the Unit to be turned off.
Press the SELECT 5 + or 4 – button to set the Off Time.
6. Press the 8 SET button.
The name of the source blinks in the display.
7. Press the SELECT 5 + or 4 – button to select the source.
The display changes with each press of the button as shown.
Ô
TUNER
Ô
TUNER
REC
Ô
CD
Ô
TAPE
Ô
TUNER:
Selects the last station you were listening to.
TUNER
REC
:
Records the last station you were listening to.
CD:
TAPE:
Plays the last CD you were listening to.
Plays the last tape you were listening to.
• In the source “TUNER”, “CD”, or “TAPE”, the timer acts as a Daily timer. Once the Daily timer has been set, it will be activated at the same time every day until the setting is turned off.
In the source “TUNER
REC
”, the timer acts as a Once timer. After the Once timer has been performed, the details of the setting remain stored but the Timer status is set to off.
24
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 24 97.7.15, 6:08 PM
8
SET
4 5
– SELECT +
8
SET
SLEEP
8. Press the 8 SET button.
The volume level blinks on the display.
9. Press the SELECT 5 + or 4 – button to set the volume level.
10. Press the 8 SET button.
The display returns to the display before you set the timer.
Before Turning the Unit Off
• Check that the selected source is ready.
• If you will be recording a source while you are out, set the volume to 0.
To turn the Timer off,
press the 2 TIMER button while pressing the SHIFT button. The Timer indicator on the display goes out.
Setting the SLEEP Timer
Use the Sleep Timer to turn the Unit off after a certain number of minutes when it is playing. By setting this timer, you can fall asleep to music and know your Unit will turn off by itself rather than play all night.
o You can only set the Sleep Timer when the Unit is on and a source is playing.
To set the SLEEP Timer, follow this procedure:
1. With the System on and a source playing, press the SLEEP button on the Remote Control.
A.BASS EX S.MODE
SLEEP
2. Set the length of time you want the source to play before shutting off.
• Each time you press this button, it changes the number of minutes shown on the display in this sequence:
=
10
=
20
=
30
=
60
=
90
=
120
= Cancelled = (back to the beginning)
When the number of minutes you want shows on the display, just wait 5 seconds until the number of minutes stops blinking, and is lighted steadily.
The Unit is now set to turn off after the number of minutes you set.
To Change the SLEEP Timer Setting
Press the SLEEP button until the number of minutes you want appears on the display.
To Cancel the SLEEP Timer Setting
Press the SLEEP button until the “SLEEP” indicator goes off on the display.
Turning off the Unit also cancels the SLEEP Timer.
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 25 97.7.15, 6:08 PM
25
Using the Microphone
PHONES
MIC 1
MIC 2
MIC LEVEL
DISC
DISC
DISC
COMPACT
DIGITAL AUDIO
3 DISC
TRIPLE TRAY PLAY & EXCHANGE SYSTEM
REPEAT
RANDOM
CONTINUE
STANDBY
POWER
SENSOR
PHONES
MULTI CONTROL
MIC 1 MIC 2 MIC LEVEL
P. DOWN P. UP
DUBBING REC CD REC START
START/STOP
DECK A/B REVERSE MODE
MIN MAX
VOLUME
FM
/AM
CD
TAPE
AUX
SOUND
MODE
ACTIVE
BASS EX.
A
PLAY
AUTO REVERSE AUTO REVERSE
REC/PLAY
B
EJECT EJECT
FULL-LOGIC CONTROL
AUTO TAPE SELECTOR
SOUND MODE
VOLUME
ECHO
SOUND
MODE
1
CLOCK
4
2
TIMER
5
– SELECT +
7 8
3
6
9
POWER
SLEEP
SHIFT
ECHO
10
SET
10 FM MODE
FM/AM
DISC
DISC
DISC
PLAY MODE
AUX
7
/CLEAR
£
/
8
C D
A
REC PAUSE
B
DECK
VOLUME
SOUND
MODE
ACTIVE
BASS EX.
RM-SED50TXU
REMOTE CONTROL
SHIFT
VOLUME –, +
Display
Source, Sound Mode Volume Level etc.
CONT.
RANDOM
ALL PRGM CLOCK kHz
MHz
A.BASS EX S.MODE
REC SLEEP MONO
ST
: Karaoke indicator
: Echo indicator
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
MIC 1 MIC 2 MIC LEVEL
MIN MAX
The System includes two microphone terminals, MIC 1 and MIC 2. By attaching a microphone to one or both of these terminals, you can use the System for Karaoke or microphone mixing. You can also add an echo to the microphone’s sound.
The MIC LEVEL control adjusts the volume for both MIC 1 and MIC 2 at the same time.
When you will not be using the microphone, keep the MIC LEVEL control set to MIN, and disconnect the microphone.
CAUTION: Always set the MIC LEVEL control to MIN when connecting or disconnecting the microphone.
Karaoke (Sing Along)
The Vocal Masking function lets you use regular tapes, CDs, or records as sources for Karaoke.
When you select Karaoke mode, the lead vocal volume of the source is reduced, and you can replace it by singing into the microphones as the music plays.
Singing Along with Karaoke ————————————————
1. Turn the MIC LEVEL control to MIN.
2. Connect the microphone (not supplied) by plugging it into the MIC jack on the front panel.
26
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 26 97.7.15, 6:08 PM
SOUND
MODE
ACTIVE
BASS EX.
SHIFT
7
ECHO or
SOUND
MODE
3. Press the SOUND MODE button repeatedly until “KARAOKE” appears in the display.
The “ ” indicator comes on.
4. Start the source CD, tape or other equipment.
5. Adjust the VOLUME control and the MIC LEVEL control, as you sing into the microphone.
Important Information on Karaoke
❏ Because a radio signal is not as reliable as signals coming from a tape or CD, you may not always get satisfactory results using the radio as a source for Karaoke.
❏ Some tapes and CDs are better sources for Karaoke than others.
• Mono sources are not suitable for Karaoke.
• The lead vocals may not be completely reduced for sources with duets, strong echo, a chorus, or only a few instruments.
• Poorly dubbed tapes may not be suitable for Karaoke.
Digital Echo ————————————————————————
You can get an echo effect to apply to your voice.
1. Press the SHIFT button on the Remote Control.
2. Press the 7 ECHO button on the Remote Control.
The Echo indicator comes on.
No echo is applied.
An echo is applied.
➧
To prevent howling and squealing (feedback) when using the microphone, adjust the MIC LEVEL control and the VOLUME control. Also, try to avoid pointing the microphone towards the speakers.
❏ When two microphones are connected, turn the microphone ON/OFF switch for the microphone that is not being used to OFF.
❏ When recording sound from the microphone, the digital echo effect is also recorded.
To Record Your Singing ——————————————————
1. Follow the steps in “Singing Along with Karaoke” above.
2. Follow the steps in “Standard Recording” (See page 21) to record your singing.
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 27 97.7.15, 6:08 PM
27
MIC 1 MIC 2 MIC LEVEL
MIN MAX
MIC 1 MIC 2 MIC LEVEL
MIN MAX
Microphone Mixing
When using special Karaoke sources for karaoke, use the following procedure.
1. Set the MIC LEVEL control to MIN.
2. Connect the microphone (not supplied) by plugging it into the MIC jack on the front panel.
3. Start the source CD, tape, or other equipment.
4. Adjust the VOLUME control and the MIC LEVEL control, as you sing into the microphone.
To apply echo to the microphone sound, follow the steps in “Digital Echo”. (See page 27.)
To Record Microphone Mixing ———————————————
1. Follow the steps in “Microphone Mixing”above.
2. To record, follow the steps in “Standard Recording”. (See page 21.)
Playing the Microphone Sound through the Speakers
1. Set the MIC LEVEL control to MIN.
2. Connect the microphone (not supplied) by plugging it into the MIC jack on the front panel.
3. Adjust the VOLUME control and the MIC LEVEL control as you sing into the microphone.
To apply echo to the microphone sound, follow the steps in “Digital Echo”. (See page 27.)
Recording from the Microphone ——————————————
1. Follow the steps in “Playing the Microphone sound through the
Speakers” above.
2. To record, follow the steps in “Standard Recording”. (See page 21.)
28
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 28 97.7.15, 6:09 PM
Care And Maintenance
Compact Discs
Handle your compact discs, cassette tapes, and
Cassette Deck carefully, and they will last a long time.
• Remove the CD from the case by holding it at the edges while pressing the centre hole lightly.
• Do not touch the shiny surface of the CD, or bend the CD.
• Put the CD back in its case after use to prevent warping.
• Be careful not to scratch the surface of the
CD when placing it back in the case.
• Avoid exposure to direct sunlight, temperature extremes, and moisture.
• A dirty CD may not play correctly. If a CD does become dirty, wipe it with a soft cloth in a straight line from centre to edge.
CAUTION: Do not use any solvent (for example, conventional record cleaner, spray thinner, benzine, etc.) to clean a CD.
Moisture Condensation
Moisture may condense on the lens inside the Unit in the following cases:
• After starting the heating in the room.
• In a damp room.
• If the unit is brought directly from a cold to a warm place.
Should this occur, the Unit may malfunction. In this case, leave the unit turned on for a few hours until the moisture evaporates, unplug the AC power cord, and then plug it in again.
General Notes
In general, you will have the best performance by keeping your tapes, CDs, and the mechanism clean.
• Store tapes and CDs in their cases, and keep them in cabinets or on shelves.
• Keep the Cassette Deck’s tape doors and the CD trays closed when not in use.
Cassette Tapes
• If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating.
• If the tape is loose, it may get stretched, cut, or caught in the cassette.
• Do not touch the tape surface.
• Do not store the tape:
In dusty places
In direct sunlight or heat
In moist areas
On a TV or speaker
Near a magnet
Cassette Deck
• If the heads, capstans, and pinch-rollers of the Cassette Deck become dirty, the following will occur:
Loss of sound quality
Discontinuous sound
Fading
Incomplete erasure
Difficulty recording
• Clean the heads, capstans, and pinch-rollers using a cotton swab moistened with alcohol.
Pinch-rollers
Capstans
Heads
• If the heads become magnetized, the Unit will produce noise or lose high frequencies.
• To demagnetize the heads, turn off the Unit, and use a head demagnetizer (available at electronics and record shops).
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 29 97.7.15, 6:09 PM
29
Troubleshooting
• If you are having a problem with your System, check this list for a possible solution before calling for service.
• If you cannot solve the problem from the hints given here, or the Unit has been physically damaged, call a qualified person, such as your dealer, for service.
Symptom
No sound is heard.
Unable to record.
Poor radio reception
The CD skips.
Unable to operate the Remote Control.
The CD tray cannot be opened.
The CD does not play.
Operations are disabled.
The cassette door cannot be opened.
Possible Cause
Connections are incorrect, or loose.
Cassette record protect tabs are removed.
• The antenna is disconnected.
• The AM Loop Antenna is too close to the Unit.
• The FM Wire Antenna is not properly extended and positioned.
The CD is dirty or scratched.
• The path between the Remote Control and the sensor on the Unit is blocked.
• The batteries have lost their charge.
The main AC power cord is not plugged in.
The CD is upside down.
The built-in microprocessor has malfunctioned due to external electrical interference.
During tape playing, the power cord was unplugged.
Action
Check all connections and make corrections. (See pages 4 - 5.)
Cover holes on back edge of cassette with tape.
• Reconnect the antenna securely.
• Change the position and direction of the
AM Loop Antenna.
• Extend FM Wire Antenna to the best reception position.
Clean or replace the CD.
• Remove the obstruction.
• Replace the batteries.
Plug in the AC power plug.
Put the CD in with the label side up.
Unplug the Unit then plug it back in.
Plug in the power cord, press the POWER button, and then press the
0 EJECT button.
30
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 30 97.7.15, 6:09 PM
Specifications
Amplifier
CA-D501T/MX-D401T
Output Power (IEC 268-3/DIN) 27 watts per channel, min. RMS, both channels driven into 6 ohms at 1 kHz with no more than 0.9% total harmonic distortion.
MX-D301T
Output Power (IEC 268-3/DIN) 12 watts per channel, min. RMS, both channels driven into 4 ohms at 1 kHz with no more than 0.9% total harmonic distortion.
Input Sensitivity/Impedance (1 kHz)
AUX
MIC 1
MIC 2
CA-D501T/MX-D401T
Speaker terminals
MX-D301T
Speaker terminals
300 mV/50 kohms
3 mV/2 kohms
3 mV/2 kohms
6 - 16 ohms
Minimum 4 ohms
Cassette Deck
Frequency Response
Type II (CrO
2
) :
Type I (NORMAL) :
Wow And Flutter
CD Automatic Changer
CD Capacity
Dynamic Range
Signal-To-Noise Ratio
Wow And Flutter
Tuner
FM Tuner
Tuning Range
AM Tuner
Tuning Range
50 - 14,000 Hz
50 - 14,000 Hz
0.15% (WRMS)
3 discs
85 dB
90 dB
Unmeasurable
87.5 - 108.0 MHz
531 - 1,602 kHz (at 9 kHz channel space)
530 - 1,710 kHz (at 10 kHz channel space)
CA-D501T/MX-D401T
Dimensions (W/H/D)
Mass
MX-D301T
Dimensions (W/H/D)
Mass
Speaker Specifications
SP-D401
Type
Speakers
Woofer
Mid Range
Tweeter
Power Hardling Capacity
Impedance
Frequecy Range
Sound Pressure Level
Dimensions (W/H/D)
Mass
265
×
295
×
339 mm
(10-7/16
×
11-5/8
×
13-3/8 inches)
7.1 kg (15.7 lbs)
265
×
295
×
339 mm
(10-7/16
×
11-5/8
×
13-3/8 inches)
6.7 kg (14.8 lbs)
3- way, 3-speaker bass-reflex type
16 cm (6-5/16 inches) cone
×
1
5 cm (2 inches) cone
×
1
2 cm (13/16 inches) dome
×
1
80 watts
6 ohms
45 Hz - 20,000 Hz
90 dB/w
•
m
215
×
295
×
275 mm
(8-1/2
×
11-5/8
×
10-7/8 inches)
3.2 kg (7.1 lbs) each
31
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 31 97.7.15, 6:09 PM
SP-D311
Type
Speakers
Woofer
Mid Range
Tweeter
Power Hardling Capacity
Impedance
Frequecy Range
Sound Pressure Level
Dimensions (W/H/D)
Mass
3- way, 3-speaker bass-reflex type
16 cm
(6−5/16 inches) cone
×
1
5 cm (2 inches) cone
×
1
2 cm (13/16 inches) dome
×
1
80 watts
4 ohms
45 Hz - 20,000 Hz
90 dB/w
• m
215
×
295
×
275 mm
(8-1/2
×
11-5/8
×
10-7/8 inches)
3.2 kg (7.1 lbs) each
Accessories
AM Loop Antenna (1)
Remote Control (1)
Batteries R6P (SUM-3)/AA (15F) (2)
FM Wire Antenna (1)
AC Plug Adaptor (except for Hong Kong) (1)
Power Specifications
CA-D501T/MX-D401T
Power Requirements
Power Consumption
AC 110/127/220/230 - 240 V , 50/60 Hz adjustable with the voltage selector
85 watts
12 watts (in standby mode)
185 watts (Taiwan only) Max. Power Consumption
MX-D301T
Power Requirements
Power Consumption
AC 110/127/220/230 - 240 V , 50/60 Hz adjustable with the voltage selector
55 watts
12 watts (in standby mode)
120 watts (Taiwan only) Max. Power Consumption
Design and specifications are subject to change without notice.
32
Downloaded From DvDPlayer-Manual.com JVC Manuals
CA-D301/401/501T[U]/EN 32 97.7.15, 6:09 PM
Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada,
Australia, and U.K.)
Instrucción sobre la línea de la red (CA) (no aplicable para Europa, EE.UU.,
Canadá, Australia, ni el Grã-Bretanha)
Instrução sobre a tensão da rede eléctrica (CA) (não aplicável para a Europa, os
E.U.A., o Canadá, a Austrália e o Reino Unido)
ANTENNA
AM EXIT
AM LOOP
FM
(75 )
GND
FM
GND
RIGHT LEFT
AUX
+
–
SPEAKERS
RIGHT LEFT
+
–
LINE VOLTS
220V
110V
230
-240V
127V
IMPORTANT for mains (AC) line
BEFORE PLUGGING IN, do check that your mains
(AC) line voltage corresponds with the position of the voltage selector switch provided on the outside of this equipment and, if different, reset the voltage selector switch, to prevent from a damage or risk of fire/electric shock.
IMPORTANTE para la línea de la red (CA)
ANTES DE ENCHUFAR EL EQUIPO, compruebe si la tensión de la línea de la red (CA) corresponde con la posición del selector de tensión situado en la parte exterior del equipo, y si es diferente, reajuste el selector de tensión para evitar el riesgo de incendios/descargas eléctricas.
IMPORTANTE para a ligação à tensão da rede (CA)
ANTES DE LIGAR O APARELHO A UMA TOMADA
DA REDE, verifique se a tensão da rede CA corresponde
à posição do seletor de voltagem localizado na parte externa deste equipamento. Caso não corresponda, reajuste o seletor de voltagem a fim de evitar avarias ou riscos de incêndio e choque elétrico.
EN, SP PR, CH, AR
Downloaded From DvDPlayer-Manual.com JVC Manuals
VICTOR COMPANY OF JAPAN, LIMITED
CA-D301T/401T/501T/Cover-1 5 97.7.15, 6:51 PM
J
V
C
0397TNYCREJEM
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 Features
- 5 How This Manual Is Organized
- 5 IMPORTANT CAUTIONS
- 7 Getting Started
- 7 Accessories
- 7 Set the VOLTAGE SELECTOR Switch
- 7 How To Put Batteries In the Remote Control
- 7 Using the Remote Control
- 8 Connecting the FM Antenna
- 8 Connecting the AM Antenna
- 10 Connecting Auxiliary Equipment
- 10 COMPU PLAY
- 11 Common Operations
- 11 Turning the Power On and Off
- 11 Turning the System On
- 11 Turning the System Off
- 12 Adjusting the Volume
- 12 Reinforcing the Bass Sound
- 12 Sound Modes
- 13 Listening to Auxiliary Equipment
- 14 Using the Tuner
- 14 Setting the AM Tuner Interval Spacing
- 14 One Touch Radio
- 15 Tuning In a Station
- 15 Switching between Frequency Bands
- 15 Three ways to select a station
- 15 Presetting Stations
- 15 To Change the FM Reception Mode
- 16 Using the CD Player
- 17 One Touch Operation
- 17 To Insert Discs
- 18 Basics of Using the CD Player — Normal Play
- 18 To Play a Disc
- 18 Within a Track
- 18 Directly
- 18 To Change Discs While Playing
- 19 Continuous Play
- 19 Programming the Playing Order of the Tracks
- 20 Random Play
- 21 Repeating a Selection or the Discs
- 21 Tray Lock Function
- 21 Locking the Electronic Lock
- 21 Unlocking the Electronic Lock
- 22 (Listening to a Tape)
- 22 One Touch Play
- 22 Regular Play
- 23 Fast Left and Fast Right
- 23 Music Scan
- 23 To Find the Beginning of the Current Selection
- 23 To Find the Beginning of the Next Selection
- 23 Reverse Mode
- 24 Using the Cassette Deck (Recording)
- 24 Things To Know Before You Start Recording
- 25 Standard Recording
- 25 To Record Any Sound Source To Tape
- 26 CD Direct Recording
- 26 Tape to Tape Recording (Dubbing)
- 26 How to Use the DUBBING Button
- 27 Using the Timer
- 27 Setting the Clock
- 28 Setting the Timer
- 29 Setting the SLEEP Timer
- 30 Using the Microphone
- 30 Karaoke (Sing Along)
- 30 Singing Along with Karaoke
- 31 Digital Echo
- 31 To Record Your Singing
- 32 Microphone Mixing
- 32 To Record Microphone Mixing
- 32 the Speaker
- 33 Care And Maintenance
- 34 Troubleshooting
- 35 Specifications