English
User Manual
MODE
ET2012 Series
MENU
English
E6991
First Edition
November 2011
Copyright © 2011 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except
documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK
COMPUTER, INC. (“ASUS”).
Products and corporate names mentioned in this manual may or may not be registered trademarks or copyrights
of their respective companies, and are used for identification purposes only. All trademarks are the property of their
respective owners.
Every effort has been made to ensure that the contents of this manual are correct and up to date. However, the
manufacturer makes no guarantee regarding the accuracy of its contents, and reserves the right to make changes
without prior notice.
Contents..................................................................................................... 3
Notices...................................................................................................................................................... 5
Federal Communications Commission Statement.......................................................... 5
Canadian Department of Communications Statement................................................. 6
IC Radiation Exposure Statement for Canada................................................................... 6
Declaration of Conformity (R&TTE directive 1999/5/EC)............................................... 6
CE Mark Warning.......................................................................................................................... 7
Wireless Operation Channel for Different Domains........................................................ 7
France Restricted Wireless Frequency Bands..................................................................... 8
REACH.............................................................................................................................................. 9
Global Environmental Regulation Compliance and Declaration ............................10
ASUS Recycling/Takeback Services.....................................................................................10
UL Safety Precaution.................................................................................................................10
ENERGY STAR complied product..........................................................................................11
Notes for this manual........................................................................................................................11
Safety information..............................................................................................................................12
Setting up your system............................................................................................................12
Care during use..........................................................................................................................12
Sound Pressure Warning.........................................................................................................13
TV Tuner (on selected models)..............................................................................................13
Adapter..........................................................................................................................................13
DC Fan Warning..........................................................................................................................13
Welcome................................................................................................... 14
Package contents...............................................................................................................................14
Getting to know your All-in-one PC....................................................... 15
Front view..............................................................................................................................................15
ET2012EG/ ET2012IG Series............................................................................................................15
ET2012EU/ ET2012IU/ ET2012A Series........................................................................................17
Rear view...............................................................................................................................................19
ET2012EG/ ET2012IG Series............................................................................................................19
ET2012EU/ ET2012IU Series............................................................................................................21
English
Contents
English
ET2012A.................................................................................................................................................23
Side views..............................................................................................................................................25
Using the touch screen.....................................................................................................................26
Showing the touch pointer....................................................................................................26
Cleaning the touch screen......................................................................................................27
Positioning your All-in-one PC............................................................... 28
Placing on the desktop.....................................................................................................................28
Installing the wall mount screw (optional)................................................................................29
Setting up your All-in-one PC................................................................. 32
Connecting the wired keyboard and mouse............................................................................32
Connecting the wireless keyboard and mouse.......................................................................32
Powering on the system..................................................................................................................33
Powering off.........................................................................................................................................33
Calibrating the screen.......................................................................................................................34
Configuring a wireless connection..............................................................................................35
Configuring a wired connection...................................................................................................36
Using a static IP...........................................................................................................................36
Using a dynamic IP (PPPoE)....................................................................................................38
Configuring the audio output........................................................................................................41
Speaker configurations............................................................................................................41
Connecting to speakers...........................................................................................................41
Recovering your system.......................................................................... 42
Using the Recovery Partition..........................................................................................................42
Recovering the OS to the Factory Default Partition (F9 Recovery)..........................42
Backing up the Factory Default Environment Data to a USB Drive (F9 Backup)42
Using the USB storage device (USB Restore)............................................................................43
English
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance
with manufacturer’s instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the grantee of this device
could void the user’s authority to operate the equipment.
RF exposure warning
This equipment must be installed and operated in accordance with provided instructions and
the antenna(s) used for this transmitter must be installed to provide a separation distance
of at least 20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter. End-users and installers must be provide with antenna
installation instructions and transmitter operating conditions for satisfying RF exposure
compliance.
All-in-one PC ET2012 Series
Canadian Department of Communications Statement
English
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus set out in the Radio Interference Regulations of the Canadian Department of
Communications.
This class B digital apparatus complies with Canadian ICES-003.
IC Radiation Exposure Statement for Canada
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. To maintain compliance with IC RF exposure compliance requirements, please
avoid direct contact to the transmitting antenna during transmitting. End users must follow
the specific operating instructions for satisfying RF exposure compliance.
Operation is subject to the following two conditions:
• This device may not cause interference and
• This device must accept any interference, including interference that may cause undesired
operation of the device.
Declaration of Conformity (R&TTE directive 1999/5/EC)
The following items were completed and are considered relevant and sufficient:
•
•
•
•
•
•
•
Essential requirements as in [Article 3]
Protection requirements for health and safety as in [Article 3.1a]
Testing for electric safety according to [EN 60950]
Protection requirements for electromagnetic compatibility in [Article 3.1b]
Testing for electromagnetic compatibility in [EN 301 489-1] & [EN 301 489-17]
Effective use of the radio spectrum as in [Article 3.2]
Radio test suites according to [EN 300 328-2]
All-in-one PC ET2012 Series
CE Mark Warning
English
This is a Class B product, in a domestic environment, this product may cause radio interference,
in which case the user may be required to take adequate measures.
CE marking for devices without wireless LAN/Bluetooth
The shipped version of this device complies with the requirements of the EEC directives
2004/108/EC “Electromagnetic compatibility” and 2006/95/EC “Low voltage directive”.
CE marking for devices with wireless LAN/ Bluetooth
This equipment complies with the requirements of Directive 1999/5/EC of the European
Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications
Equipment and mutual recognition of conformity.
Wireless Operation Channel for Different Domains
N. America
2.412-2.462 GHz
Ch01 through CH11
Japan
2.412-2.484 GHz
Ch01 through Ch14
Europe ETSI
2.412-2.472 GHz
Ch01 through Ch13
All-in-one PC ET2012 Series
France Restricted Wireless Frequency Bands
English
Some areas of France have a restricted frequency band. The worst case maximum authorized
power indoors are:
•
10mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz)
•
100mW for frequencies between 2446.5 MHz and 2483.5 MHz
Channels 10 through 13 inclusive operate in the band 2446.6 MHz to 2483.5 MHz.
There are few possibilities for outdoor use: On private property or on the private property
of public persons, use is subject to a preliminary authorization procedure by the Ministry of
Defense, with maximum authorized power of 100mW in the 2446.5–2483.5 MHz band. Use
outdoors on public property is not permitted.
In the departments listed below, for the entire 2.4 GHz band:
•
Maximum authorized power indoors is 100mW
•
Maximum authorized power outdoors is 10mW
Departments in which the use of the 2400–2483.5 MHz band is permitted with an EIRP of less
than 100mW indoors and less than 10mW outdoors:
01 Ain 02 Aisne
03 Allier
05 Hautes Alpes
08 Ardennes
09 Ariège
11 Aude
12 Aveyron
16 Charente
24 Dordogne
25 Doubs
26 Drôme
32 Gers
36 Indre
37 Indre et Loire
41 Loir et Cher 45 Loiret
50 Manche
55 Meuse
58 Nièvre
59 Nord
61 Orne
63 Puy du Dôme
64 Pyrénées Atlantique
66 Pyrénées Orientales 67 Bas Rhin
68 Haut Rhin
70 Haute Saône
71 Saône et Loire
75 Paris
82 Tarn et Garonne
84 Vaucluse
88 Vosges
89 Yonne
90 Territoire de Belfort
94 Val de Marne
60 Oise
This requirement is likely to change over time, allowing you to use your wireless LAN card in
more areas within France. Please check with ART for the latest information (www.arcep.fr)
Your WLAN Card transmits less than 100mW, but more than 10mW.
All-in-one PC ET2012 Series
English
NO DISASSEMBLY
The warranty does not apply to the products that
have been disassembled by users
Lithium-Ion Battery Warning
CAUTION: Danger of explosion if RTC (Real Time Clock) battery is
incorrectly replaced. It should be replaced only with the same or equivalent
type by the manufacturer. Dispose of used batteries according to the
manufacturer’s instructions.
No Exposure to Liquids
DO NOT expose to or use near liquids, rain, or moisture. This product is not
waterproof or oil-proof.
This symbol of the crossed out wheeled bin indicates that the product (electrical, electronic
equipment, and mercury-containing button cell battery) should not be placed in municipal
waste. Check local regulations for disposal of electronic products.
DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin
indicates that the battery should not be placed in municipal waste.
REACH
Complying with the REACH (Registration, Evaluation, Authorization, and Restriction of
Chemicals) regulatory framework, we publish the chemical substances in our products at ASUS
REACH website at http://csr.asus.com/english/REACH.htm.
All-in-one PC ET2012 Series
Global Environmental Regulation Compliance and Declaration
English
ASUS follows the green design concept to design and manufacture our products, and
makes sure that each stage of the product life cycle of ASUS product is in line with global
environmental regulations. In addition, ASUS disclose the relevant information based on
regulation requirements.
Please refer to http://csr.asus.com/english/Compliance.htm for information disclosure based
on regulation requirements ASUS is complied with:
Japan JIS-C-0950 Material Declarations
EU REACH SVHC
Korea RoHS
Swiss Energy Laws
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards
for protecting our environment. We believe in providing solutions for you to be able to
responsibly recycle our products, batteries, other components as well as the packaging
materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling
information in different regions.
UL Safety Precaution
To meet safety requirements, the All-in-one PC must be mounted to a standard wall mount
rack which guarantees the necessary stability considering the weight of the All-in-one PC. The
All-in-one PC should only be mounted and used with UL listed wall mount adapter, pad, and
rack (e.g. VESA).
The wall mount adapter, pad, and rack must be able to sustain at least 21kg and is UL
certified.
10
All-in-one PC ET2012 Series
ENERGY STAR complied product
English
ENERGY STAR is a joint program of the U.S. Environmental Protection Agency
and the U.S. Department of Energy helping us all save money and protect the
environment through energy efficient products and practices.
All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR
standard, and the power management feature is enabled by default. The
monitor and computer are automatically set to sleep after 15 and 30 minutes
of user inactivity. To wake your computer, click the mouse or press any key on the keyboard.
Please visit http://www.energy.gov/powermanagement for detail information on power
management and its benefits to the environment. In addition, please visit http://www.
energystar.gov for detail information on the ENERGY STAR joint program.
ENERGY STAR is NOT supported on Freedos and Linux-based products.
Notes for this manual
To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
WARNING: Vital information that you MUST follow to prevent injury to yourself.
IMPORTANT: Instructions that you MUST follow to complete a task.
TIP: Tips and useful information that help you complete a task.
NOTE: Additional information for special situations.
All illustrations and screenshots in this manual are for reference only. Actual product
specifications and software screen images may vary with territories. Visit the ASUS
website at www.asus.com for the latest information.
All-in-one PC ET2012 Series
11
Safety information
English
Your All-in-one PC ET2012 Series is designed and tested to meet the latest standards of safety
for information technology equipment. However, to ensure your safety, it is important that you
read the following safety instructions.
Setting up your system
•
•
•
•
Read and follow all instructions in the documentation before you operate your system.
Do not use this product near water or a heated source such as a radiator.
Set up the system on a stable surface.
Openings on the chassis are for ventilation. Do not block or cover these openings. Ensure
that you leave plenty of space around the system for ventilation. Never insert objects of any
kind into the ventilation openings.
• Use this product in environments with ambient temperatures between 0˚C and 40˚C.
• If you use an extension cord, ensure that the total ampere rating of the devices plugged
into the extension cord does not exceed its ampere rating.
Care during use
• Do not walk on the power cord or allow anything to rest on it.
• Do not spill water or any other liquids on your system.
• When the system is turned off, a small amount of electrical current still flows. Always unplug
all power, modem, and network cables from the power outlets before cleaning the system.
• The touch screen requires periodic cleaning to achieve the best touch sensitivity. Keep the
screen clean from foreign objects or excessive dust accumulation. To clean the screen:
•
Turn off the system and disconnect the power cord from the wall.
•
Spray a small amount of a household glass cleaner onto the supplied cleaning cloth
and gently wipe the screen surface.
•
Do not spray the cleaner directly on the screen.
•
Do not use an abrasive cleaner or a coarse cloth when cleaning the screen.
• If you encounter the following technical problems with the product, unplug the power cord
and contact a qualified service technician or your retailer.
•
The power cord or plug is damaged.
•
Liquid has been spilled into the system.
•
The system does not function properly even if you follow the operating instructions.
•
The system was dropped or the cabinet is damaged.
•
The system performance changes.
12
All-in-one PC ET2012 Series
English
Sound Pressure Warning
Excessive sound pressure from earphones or headphones can cause hearing damage or loss.
Adjustment of the volume control as well as the equalizer to settings other than the center
position may increase the earphones or headphones output voltage and the sound pressure
level.
TV Tuner (on selected models)
Note to CATV System Installer—This reminder is provided to call the CATV systems installer’s
attention to Section 820-93 of the National Electric Code, which provides guidelines for
proper grounding and, in particular, specify that the Coaxial cable shield be connected to the
grounding system of the building as close to the point of cable entry as practical.
Adapter
1. Adapter information (varies with the purchased model)
a. Input voltage: 100–240Vac
Input frequency: 50–60Hz
Rating output current: 120W (19V, 6.32A)
Rating output voltage: 19Vdc
b. Input voltage: 100–240Vac
Input frequency: 50–60Hz
Rating output current: 90W (19V, 4.74A)
Rating output voltage: 19Vdc
c. Input voltage: 100–240Vac
Input frequency: 50–60Hz
Rating output current: 65W (19V, 3.42A)
Rating output voltage: 19Vdc
2. The socket outlet must be near to the unit and easily accessible.
DC Fan Warning
Please note that the DC fan is a moving part that may cause DANGER. Ensure to keep your
body from the moving fan blades.
All-in-one PC ET2012 Series
13
Welcome
English
Congratulations on your purchase of All-in-one PC ET2012 Series. The following illustration
displays the package contents of your new product. If any of the following items is damaged or
missing, contact your retailer.
Package contents
MODE
MENU
All-in-one PC ET2012 Series
Keyboard (optional)
Mouse (optional)
AC adapter
Power cord
Warranty card
Wall mount screws (optional)
KBM USB receiver dongle (optional)
Note:
1. The keyboard, mouse, and power
supply illustrations are for reference
only. Actual product specifications
may vary with territories.
2. Keyboard and mouse can be wired
or wireless.
Remote Control (optional)
14
All-in-one PC ET2012 Series
TV connector (optional)
English
Getting to know your All-in-one PC
Front view
Refer to the following diagram to identify the components on this side of the system. The front
view may differ depending on the model you purchased.
ET2012EG/ ET2012IG Series
1
2
3
4
MODE
11
10 9
MENU
8
7
6
5
All-in-one PC ET2012 Series
15
1
English
2
3
4
5
6
7
8
9
10 16
Webcam
The built-in webcam with the built-in digital microphone allows you to start video
chats online.
Webcam LED
Indicates that the built-in webcam is enabled.
Digital Microphone (Built-in)
The built-in digital microphone can be used for video conferencing, voice narrations,
audio recordings, and multimedia applications.
LCD Display (Touch-enabled function on selected models)
The 20-inch LCD display, with an optimal resolution of 1600 x 900, features touch
function that brings digital life to your fingertips.
Power Switch
The power switch allows you to switch the system ON/OFF.
Volume Up Button
Press to increase the volume. Press to scroll up when navigating the menu.
MENU Button
Press to display the menu. Press this button to enter/select the icon (function)
highlighted while the OSD is activated.
Volume Down Button
Press to decrease the volume. Press to scroll down when navigating the menu.
MODE Button
Press to switch the display signal source. When switched to HDMI input, the All-in-one
PC can be used as a standard desktop LCD monitor.
Hard Disk Drive LED
Indicates hard disk drive activity.
11 IR Receiver (on selected models)
The IR Receiver receives Infrared (IR) signals from the remote control.
All-in-one PC ET2012 Series
1
English
ET2012EU/ ET2012IU/ ET2012A Series
2
3
4
11
10 9
8
7
6
5
All-in-one PC ET2012 Series
17
1
English
2
3
4
5
6
7
8
9
10 18
Webcam
The built-in webcam with the built-in digital microphone allows you to start video
chats online.
Webcam LED
Indicates that the built-in webcam is enabled.
Digital Microphone (Built-in)
The built-in digital microphone can be used for video conferencing, voice narrations,
audio recordings, and multimedia applications.
LCD Display (Touch-enabled function on selected models)
The 20-inch LCD display, with an optimal resolution of 1600 x 900, features touch
function that brings digital life to your fingertips.
Power Switch
The power switch allows you to switch the system ON/OFF.
Brightness Up Button
Increases the display brightness.
Brightness Down Button
Decreases the display brightness.
Volume Up Button
Increases the speaker volume.
Volume Down Button
Decreases the speaker volume.
Hard Disk Drive LED
Indicates hard disk drive activity.
11 IR Receiver (on selected models)
The IR Receiver receives Infrared (IR) signals from the remote control.
All-in-one PC ET2012 Series
Rear view
English
Refer to the following diagram to identify the components on this side of the system.
ET2012EG/ ET2012IG Series
ANT/CABLE
2
1
2
1
3 4
5 6
7
8
Stand
Allows you to position the system upright.
Kensington® Lock port
The Kensington® lock port allows the computer to be secured using Kensington®
compatible security products. These security products usually include a metal cable
and lock that prevent the computer to be removed from a fixed object.
All-in-one PC ET2012 Series
19
3
English
Power input
The supplied power adapter converts AC power to DC power for use with this jack.
Power supplied through this jack supplies power to the PC. To prevent damage to the
PC, always use the supplied power adapter.
The power adapter may become warm or hot when in use. Do not cover the adapter and keep it
away from your body.
4
5
6
7
8
20
USB port
The Universal Serial Bus (USB) port is compatible with USB devices such as keyboards,
mouse devices, cameras, and hard disk drives.
HDMI input port
HDMI (High-Definition Multimedia Interface) is an uncompressed all-digital audio/
video interface between any audio/video source, such as a set-top box, DVD player.
Display (Monitor) Output
The 15-pin D-sub monitor port supports a standard VGA-compatible device such as a monitor or projector to allow viewing on a larger external display.
LAN port
The eight-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a
local network.
Antenna Input (on selected model)
The antenna input is for TV or FM Radio (optional) frequency signal and allows for use
from subscription television services. The provided antenna can receive digital TV or FM radio.
All-in-one PC ET2012 Series
2
1
2
1
English
ET2012EU/ ET2012IU Series
3
4
5
6
7
Stand
Allows you to position the system upright.
Kensington® Lock port
The Kensington® lock port allows the computer to be secured using Kensington®
compatible security products. These security products usually include a metal cable
and lock that prevent the computer to be removed from a fixed object.
All-in-one PC ET2012 Series
21
3
English
Power input
The supplied power adapter converts AC power to DC power for use with this jack.
Power supplied through this jack supplies power to the PC. To prevent damage to the
PC, always use the supplied power adapter.
The power adapter may become warm or hot when in use. Do not cover the adapter and keep it
away from your body.
4
5
6
7
22
USB port
The Universal Serial Bus (USB) port is compatible with USB devices such as keyboards,
mouse devices, cameras, and hard disk drives.
Display (Monitor) Output
The 15-pin D-sub monitor port supports a standard VGA-compatible device such as a monitor or projector to allow viewing on a larger external display.
LAN port
The eight-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a
local network.
Serial port (on selected model)
This 9-pin serial port (COM1) is for serial devices.
All-in-one PC ET2012 Series
English
ET2012A
2
1
2
1
3
4
5
6
7
Stand
Allows you to position the system upright.
Kensington® Lock port
The Kensington® lock port allows the computer to be secured using Kensington®
compatible security products. These security products usually include a metal cable
and lock that prevent the computer to be removed from a fixed object.
All-in-one PC ET2012 Series
23
3
English
Power input
The supplied power adapter converts AC power to DC power for use with this jack.
Power supplied through this jack supplies power to the PC. To prevent damage to the
PC, always use the supplied power adapter.
The power adapter may become warm or hot when in use. Do not cover the adapter and keep it
away from your body.
4
5
6
7
24
USB port
The Universal Serial Bus (USB) port is compatible with USB devices such as keyboards,
mouse devices, cameras, and hard disk drives.
Display (Monitor) Output (on selected model)
The 15-pin D-sub monitor port supports a standard VGA-compatible device such as a monitor or projector to allow viewing on a larger external display.
LAN port
The eight-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a
local network.
Antenna Input (on selected model)
The antenna input is for TV or FM Radio (optional) frequency signal and allows for use
from subscription television services. The provided antenna can receive digital TV or FM radio.
All-in-one PC ET2012 Series
Side views
1
2
3
4
5
6
English
Refer to the following diagrams to identify the components on both sides of the system.
Memory card reader (on selected model)
Normally an external memory card reader must be
purchased separately in order to read memory
cards. This All-in-one PC has a built-in memory card
reader that supports MMC/SD/SDHC cards used in
devices like digital cameras, MP3 players, mobile
phones, and PDAs.
USB 2.0 port/USB 3.0 port (on selected model)
The Universal Serial Bus (USB) port is compatible with
USB devices such as keyboards, mouse devices,
cameras, and hard disk drives.
1
2
3
4
5
HDMI output port
HDMI (High-Definition Multimedia Interface) is an uncompressed all-digital audio/ video interface between any audio/video source, such as a set-top box, DVD player.
Microphone jack
The microphone jack is designed to connect a
microphone used for video conferencing, voice
narrations, or simple audio recordings.
Headphone/Audio Out jack
The stereo headphone jack (3.5mm) is used to connect
the system’s audio out signal to amplified speakers or
headphones. Using this jack automatically disables the
built-in speakers.
6
Optical Drive
The built-in optical drive may support compact discs
(CD) and/or digital video discs (DVD), Blu-ray discs, and may have recordable (R) or re-writable (RW) capabilities. See the marketing specifications for details on each model.
All-in-one PC ET2012 Series
25
Using the touch screen
English
All-in-one PC brings digital life to your fingertips. With a few touches, you can make All-in-one
PC work at your command. Your touch functions like a mouse device:
• Touch = left-click on the mouse
• Touch and hold = right-click on the mouse
The touch-enabled screen is available on selected models.
Showing the touch pointer
The touch pointer, virtual mouse, helps you use the touch-enabled screen more conveniently.
To show the touch pointer
1. From the Windows® desktop, click Start
> Control Panel > View Devices and
Printer.
26
All-in-one PC ET2012 Series
English
2. Click Change touch input settings.
3. Click the Touch tab on the top and click
the box before Show the touch pointer
when I’m interacting with items
on the screen. Click OK to finish the
configuration.
4. You will see a virtual mouse on the screen
when you touch the screen.
Cleaning the touch screen
The touch screen requires periodic cleaning to achieve the best touch sensitivity. Keep the
screen clean from foreign objects or excessive dust accumulation. To clean the screen:
• Turn off the system and disconnect the power cord from the wall.
• Spray a small amount of a household glass cleaner onto the supplied cleaning cloth and
gently wipe the screen surface and the screen frame.
• Do not spray the cleaner directly on the screen.
• Do not use an abrasive cleaner or a coarse cloth when cleaning the screen.
All-in-one PC ET2012 Series
27
Positioning your All-in-one PC
English
Placing on the desktop
Place your All-in-one PC on a flat surface such as a table or desk, and ��������������������������
pull the stand open until
it snaps in place. Then, tilt the display panel to an angle of between 12 and 30 degrees from an
upright position.
12O
28
All-in-one PC ET2012 Series
0O
30O
0O
Installing the wall mount screw (optional)
English
To mount your All-in-one PC to the wall, purchase the optional wall mount screws and wall
mount kit (pad and rack; VESA100, 100mm x 100mm). Install the wall mount screws according
to the following instructions.
1. Place your All-in-one PC face-down on a flat surface, such as a table or desk, and then
remove the two screws beside the stand. Keep the screws for future use in case you want
to reinstall the stand.
2. To release the stand, press the stand downward, shove it forward, and lift. Take out the
stand and put it aside.
3
1
2
All-in-one PC ET2012 Series
29
3. Remove the four rubber caps, from the rear panel holes,.
English
4. Secure the four wall mount screws to the rear panel holes.
30
All-in-one PC ET2012 Series
English
5. Mount the All-in-one PC onto a firm wall by applying a standard wall mount kit (pad
and rack) to the wall mount screws. Follow the instructions described in the installation
manual that came with your wall mount kit.
• The wall mount screws are optional accessories.
• The wall mount kit should comply with VESA 100 standards, which can be purchased
separately.
• To ensure safety, please read the wall mount kit installation manual carefully before
mounting your All-in-one PC to the wall.
All-in-one PC ET2012 Series
31
Setting up your All-in-one PC
English
Connecting the wired keyboard and mouse
Connect the keyboard and mouse to the USB port on the rear panel ( 1 ). Y��������������������
ou may also ��������
connect
the keyboard and mouse to the USB port on the left side ( 2 ) if the keyboard and mouse cable
is not long enough�.
2
1
Connecting the wireless keyboard and mouse
1. Install batteries to the wireless
keyboard and mouse.
2. Insert the wireless keyboard/mouse
receiver to the USB port on the Allin-one PC.
3. You can begin using the wireless
keyboard and mouse.
The illustrations above are for reference only. Actual appearances and specifications (wired or
wireless) of the keyboard and mouse may vary with territories.
32
All-in-one PC ET2012 Series
Powering on the system
1
2
3
) and then press
English
Connect the supplied AC adapter to the DC IN jack on the rear panel (
the Power switch on the front panel ( 4 ) to turn on the system.
2
3
1
WARNING! DO NOT connect the AC power cord to an AC outlet prior to connecting the DC plug
to the system. Doing so may damage the AC-DC adapter.
4
Powering off
• To put the system into suspend mode, press the Power switch on the front panel. To
bring the system back to the OS, press the Power switch again, click the mouse, touch the
display, or press any key on the keyboard.
• To shut down the system completely, follow the normal Windows shutdown process or
press and hold the Power switch for five seconds.
All-in-one PC ET2012 Series
33
Calibrating the screen
English
All-in-one PC comes with the following software tool that allows you to adjust touch screen
precision.
The touch-enabled screen is available on selected models.
1. From the Windows® desktop, click Start
> Control Panel > Hardware and Sound
> Tablet PC Settings and click Calibrate
the screen for pen or touch input.
2. From the Display tab, click Calibrate.
3. To provide calibration samples, tap the
crosshair each time that it appears on the
screen.
Right-click anywhere on the screen to
return to the last calibration point. Press
the Esc key on the keyboard to close
the tool. Do not change your screen
orientation until you have completed the
calibration process.
34
All-in-one PC ET2012 Series
1. Click the wireless network icon with an orange star
English
Configuring a wireless connection
in the Windows® Notification area.
2. Select the wireless access point you
want to connect to from the list and click
Connect to build the connection.
If you cannot find the desired access point,
click the Refresh icon on the upper
right corner to refresh and search in the
list again.
Enter the network security key when
connecting to a security-enabled network.
3. After a connection has been established, the connection is shown on the list.
4. You can see the wireless network icon
in the Notification area.
All-in-one PC ET2012 Series
35
Configuring a wired connection
English
Using a static IP
1. Click the network icon with a yellow
warning triangle
in the
Windows® Notification area and select
Open Network and Sharing Center.
Ensure that you have connected the LAN
cable to the All-in-one PC.
2. Click Change adapter settings in the left
pane.
3. Right-click Local Area Connection and
select Properties.
36
All-in-one PC ET2012 Series
English
4. Click Internet Protocol Version 4(TCP/
IPv4) and click Properties.
5. Select Use the following IP address.
6. Enter your IP address, Subnet mask, and
Default gateway.
7. If needed, enter the Preferred DNS
server address.
8. After entering all the related values, click
OK to finish the configuration.
All-in-one PC ET2012 Series
37
Using a dynamic IP (PPPoE)
English
1. Repeat steps 1–4 in the previous section.
2
Select Obtain an IP address
automatically and click OK.
(Continue the following steps if using PPPoE)
3. Return to the Network and Sharing
Center and then click Set up a new
connection or network.
4. Select Connect to the Internet and click
Next.
38
All-in-one PC ET2012 Series
English
5. Select Broadband (PPPoE) and click
Next.
6. Enter your User name and, Password, and
Connection name. Click Connect.
7. Click Close to finish the configuration.
All-in-one PC ET2012 Series
39
English
8. Click the network icon in the notification
area and click the connection you just
created.
9. Enter your user name and password. Click
Connect to connect to the Internet.
40
All-in-one PC ET2012 Series
Configuring the audio output
English
All-in-one PC supports different types of audio configurations. Set up the system using stereo
speakers.
Speaker configurations
Set up the system with the following speaker configurations:
Name
2-channel (stereo)
Speaker system
Left speaker and right speaker.
Audio jack
Headphones/2-channel
Audio Out
Mic In
A stereo speaker set is a left-right, two channel speaker system. A multi-channel audio speaker
has a left-right front and left-right rear (surround) channel.
Connecting to speakers
Refer to the table below for the audio jacks on the left panel and their functions.
For stereo speakers or headphones
Audio jack
Description
Connects to stereo speakers or headphones.
All-in-one PC ET2012 Series
41
Recovering your system
English
Using the Recovery Partition
Recovering the OS to the Factory Default Partition (F9 Recovery)
1. Press [F9] during bootup.
2. Select Windows setup [EMS Enabled] when this item appears and press [Enter].
3. Select the language and click Next.
4. Select Recover the OS to the Default Partition and click Next.
5. The factory default partition will be displayed. Click Next.
6. Data on the default partition will be cleared. Click Recover to start the system recovery.
You will lose all your data on the selected partition. Ensure to back up your important data
beforehand.
7. When the recovery is completed successfully, click Reboot to restart the system.
Backing up the Factory Default Environment Data to a USB Drive (F9
Backup)
1. Repeat the step 1–3 in the previous section.
2. Select Backup the Factory Environment to a USB Drive and click Next.
3. Connect a USB storage device to your PC to start the Factory Default Environment backup.
The required size of the connected USB storage device should be larger than 20GB. The actual
size may vary with your PC model.
4. Select a desired USB storage device if more than one USB storage device is connected to
your All-in-one PC and click Next.
If there is already a partition with proper size in the selected USB storage device (for example,
a partition that has been used as the backup partition), the system will show this partiton
automatically and reuse it for backup.
5. Based on the different situations in the previous step, data on the selected USB storage
device or on the selected partition will be cleared. Click Backup to start backup.
You will lose all your data on the selected USB storage device or on the selected partition.
Ensure to back up your important data beforehand.
6. When backing up the factory default environment is completed successfully, click Reboot
to restart the system.
(Continued on the next page)
42
All-in-one PC ET2012 Series
English
Using the USB storage device (USB Restore)
When the Recovery Partition in your system is crashed, use the USB storage device to restore
the system to the factory default partition or the factory environment data to the entire hard
disk.
1. Connect the USB storage device that you back up the factory environment data to.
2. Press <ESC> on bootup and the Please select boot device screen appears. Select USB:
XXXXXX to boot from the connected USB storage device.
3. Select the language and click Next.
4. Select Restore and click Next.
5. Select a task and click Next. Task options:
Restore the OS to the Default Partition only
Select this option if you simply want to restore the OS to the factory default partition. This
option deletes all data on the system partition “C” and keeps the partition “D” unchanged.
After you click Next, the factory default partition will be displayed. Click Next again.
Restore the Whole Hard Disk
Select this option if you want to restore your All-in-one PC to the factory default state. This
option deletes all data from your hard disk and creates a new system partition as drive “C” ,
an empty partition as drive “D“ and a Recovery Partition.
6. Data on the factory default partition or on the whole hard disk will be cleared depending
on the option you selected in the previous step. Click Restore to start the task.
7. When the restore is completed successfully, click Reboot to restart the system.
All-in-one PC ET2012 Series
43
English
44
Manufacturer
ASUSTek COMPUTER INC.
Address, City
No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C
Country
TAIWAN
Authorized Representative in Europe
ASUS COMPUTER GmbH
Address, City
HARKORT STR. 21-23, 40880 RATINGEN
Country
GERMANY
All-in-one PC ET2012 Series