Samsung SCX-5312F - B/W Laser - All-in-One User`s guide

SCX-5312F/5112
User’s Guide
Home
Visit us at:
www.samsungelectronics.com/mfp
P/N: JC68-00851A Rev. 2.00
CONTENTS
Chapter 1:
GETTING
STARTED
Unpacking ..........................................................
Component Location ............................................
Front View .....................................................
Rear View ......................................................
1.2
1.4
1.4
1.5
Control Panel Functions ........................................ 1.6
SCX-5312F .................................................... 1.6
SCX-5112 ...................................................... 1.9
Making Connections ............................................
Installing Drum and Toner Cartridges ....................
Turning the Product On .......................................
Loading Paper ....................................................
Setting the Paper Size .........................................
Changing the Display Language ............................
Using Save Mode ................................................
Toner Save ...................................................
Paper Save ...................................................
Power Save ...................................................
Chapter 2:
1.11
1.14
1.17
1.17
1.20
1.20
1.21
1.21
1.21
1.22
INSTALLING SOFTWARE
About Samsung Software .....................................
MFP Driver .....................................................
SmarThru Software .........................................
OCR Software (AnyPage Lite) ...........................
2.2
2.2
2.2
2.2
System Requirements .......................................... 2.3
Installing Samsung Software ................................. 2.4
Configuring Fax and Internet Gates ........................ 2.8
Uninstalling Samsung Software ............................ 2.12
Uninstalling the MFP Driver ............................. 2.12
Uninstalling Samsung SmarThru ...................... 2.14
Using the SmarThru CD-ROM .......................... 2.16
i
Chapter 3:
PAPER HANDLING
Selecting Print Media ............................................
Paper Guidelines ..................................................
Loading Paper in Cassette .....................................
Using the Bypass Tray ..........................................
Setting the Paper Size for Copying .........................
Chapter 4:
3.2
3.3
3.4
3.6
3.9
COPYING
Loading Paper for Copy Output .............................. 4.2
Selecting Paper Tray ............................................ 4.2
Making Copies from the Automatic Document Feeder 4.3
Making Copies on the Document Glass .................... 4.4
Setting Copy Options ........................................... 4.6
Image ........................................................... 4.6
Contrast ........................................................ 4.6
Set ............................................................... 4.7
Zoom ............................................................ 4.7
Auto Fit .............................................................. 4.8
Clone ................................................................. 4.9
Duplex Copy ...................................................... 4.10
Collation Copy .................................................... 4.11
Chapter 5:
PRINTING
Printing a Document ............................................ 5.2
Printer Settings ................................................... 5.3
Accessing Printer Settings ................................ 5.3
Printer Properties Tabs .................................... 5.4
Printer Properties Buttons & Icons .................... 5.12
Chapter 6:
SCANNING
Scanning using the Samsung SmarThru .................. 6.2
Scanning Process with TWAIN-enabled Software ...... 6.4
ii
Chapter 7:
MAINTENANCE
Cleaning the Scan Unit ......................................... 7.2
Expected Cartridge Life ........................................ 7.3
Replacing the Toner Cartridge ............................... 7.3
Setting to Notify Toner Low ................................... 7.7
Cleaning the Drum ............................................... 7.8
Replacing the Drum Cartridge ............................... 7.8
Consumables and Replacement Parts .................... 7.11
Chapter 8:
TROUBLESHOOTING
Document Jams ...................................................
Input Misfeed .................................................
Exit Misfeed ...................................................
Roller Misfeed ................................................
8.2
8.2
8.3
8.3
Paper Jams ......................................................... 8.4
Paper Feed Area ............................................. 8.4
Fuser Area ..................................................... 8.6
Paper Exit Area .............................................. 8.7
Duplex Jam .................................................... 8.9
Bypass Jam .................................................. 8.10
LCD Error Messages ............................................
Solving Problems ................................................
Copier Problem Solution Chart .........................
Printing Problem Solution Chart .......................
Fax Problem Solution Chart .............................
Chapter 9:
8.11
8.13
8.13
8.15
8.18
APPENDIX
General Specifications ..........................................
Scanner and Copy Specifications ............................
Printer Specifications ............................................
Facsimile Specifications ........................................
9.2
9.3
9.4
9.4
INDEX
iii
Important Precautions and Safety Information
When using this product, these basic safety precautions should always be followed to
reduce risk of fire, electric shock, and injury to persons:
1. Read and understand all instructions.
2. Use common sense whenever operating electrical appliances.
3. Follow all warnings and instructions marked on the product and in the literature
accompanying the product.
4. If an operating instruction appears to conflict with safety information, heed the
safety information. You may have misunderstood the operating instruction. If you
cannot resolve the conflict, contact your sales or service representative for
assistance.
5. Unplug the product from the AC wall socket and/or telephone jack before
cleaning. Do not use liquid or aerosol cleaners. Use only a damp cloth for
cleaning.
6. Do not place the product on an unstable cart, stand, or table. It may fall, causing
serious damage.
7. Your product should never be placed on, near, or over a radiator, heater, air
conditioner, or ventilation duct.
8. Do not allow anything to rest on the power. Do not locate your product where the
cords will be abused by persons walking on them.
9. Do not overload wall outlets and extension cords. This can diminish performance,
and may result in the risk of fire or electric shock.
10. Do not allow pets to chew on the AC power, telephone, or PC interface cords.
11. Never push objects of any kind into the product through case or cabinet openings.
They may touch dangerous voltage points, creating a risk of fire or shock. Never
spill liquid of any kind onto or into the product.
12. You product may have a heavy cover for optimal pressure on the document for
the best scanning and/or faxing (usually the flatbed-type product). In this case,
replace the cover after placing document on the scan glass, by holding and
moving it down slowly until it seats on its location.
13. To reduce the risk of electric shock, do not disassemble the product. Take it to a
qualified service technician when repair work is required. Opening or removing
covers may expose you to dangerous voltages or other risks. Incorrect
reassembly could cause electric shock when the unit is subsequently used.
iv
14. Unplug the product from the telephone jack, PC and AC wall outlet, and refer
servicing to qualified service personnel under the following conditions:
• When any part of the power cord, plug, or connecting cable is damaged or
frayed.
• If liquid has been spilled into the product.
• If the product has been exposed to rain or water.
• If the product does not operate properly after instructions have been followed.
• If the product has been dropped, or the cabinet appears damaged.
• If the product exhibits a sudden and distinct change in performance.
15. Adjust only those controls covered by the operating instructions. Improper
adjustment of other controls may result in damage, and may require extensive
work by a qualified service technician to restore the product to normal operation.
16. Avoid using this product during a lightning storm. There may be a remote risk of
electric shock from lightning. If possible, unplug the AC power and telephone cord
for the duration of the lightning storm.
17. SAVE THESE INSTRUCTIONS.
Laser Safety Statement
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR,
chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is certified as a
Class I laser product conforming to the requirements of IEC 825.
Class I laser products are not considered to be hazardous. The laser system and
printer are designed so there is never any human access to laser radiation above a
Class I level during normal operation, user maintenance, or prescribed service
condition.
WARNING
Never operate or service the printer with the protective cover removed from Laser/
Scanner assembly. The reflected beam, although invisible, can damage your eyes.
CAUTION - INVISIBLE LASER RADIATION WHEN THIS COVER OPEN.
DO NOT OPEN THIS COVER.
VORSICHT - UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG
GEÖFFNET. NICHT DEM STRAHL AUSSETZEN.
ATTENTION - RAYONNEMENT LASER INVISIBLE EN CAS D’OUVERTURE.EXPOSITION
DAN GEREUSE AU FAISCEAU.
ATTENZIONE -RADIAZIONE LASER INVISIBILE IN CASO DI APERTURA. EVITARE
L’ESPOSIZIONE AL FASCIO.
v
PRECAUCION -RADIACION LASER IVISIBLE CUANDO SE ABRE. EVITAR EXPONERSE
AL RAYO.
ADVARSEL - USYNLIG LASERSTRÅLNING VED ÅBNING NÅR SIKKERHEDSBRYDERE
ER UDE AF FUNKTION. UNDGÅ UDSAETTELSE FOR STRÅLNING.
ADVARSEL - USYNLIG LASERSTRÅLNING NÅR DEKSEL ÅPNES. STIRR IKKE INN I
STRÅLEN. UNNGÅ EKSPONERING FOR STRÅLEN.
VARNING - OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPAND OCH SPÄRREN
ÄR URKOPPLAD. BETRAKTA EJ STRÅLEN. STRÅLEN ÄR FARLIG.
VARO! - AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA
NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE ÄLÄ KATSO SÄTEESEEN.
Ozone Safety
During normal operation, this product produces ozone. The
ozone produced does not present a hazard to the operator.
However, it is advisable that the product be operated in a well
ventilated area.
If you need additional information about ozone, please request
your nearest Samsung dealer.
Power Saver
This product contains advanced energy conservation
technology that reduces power consumption when it is not
in active use.
When the product does not receive data for an extended
period of time, power consumption is automatically
lowered.
The energy star emblem does not represent EPA
endorsement of any product or service.
vi
Radio Frequency Emissions
FCC Information to the User
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
Canadian Radio Interference Regulations
This digital apparatus does not exceed the Class A limits for radio noise emissions
from digital apparatus as set out in the interference-causing equipment standard
entitled “Digital Apparatus”, ICES-003 of the Industry and Science Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux
appareils numériques de Classe A prescrites dans la norme sur le matériel brouilleur:
“Appareils Numériques”, ICES-003 édictée par l’Industrie et Sciences Canada.
Fax Branding
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to
use a computer or other electronic device to send any message via a telephone
facsimile machine unless such message clearly contains in a margin at the top or
bottom of each transmitted page or on the first page of the transmission the following
information:
(1) the date and time of transmission
(2) identification of either business, business entity or individual sending the
message; and
(3) telephone number of either the sending machine, business, business entity or
individual.
Refer to the Facsimile User’s Guide for instructions on how to enter this information
into your product’s memory.
vii
The Telephone Company may make changes in its communications facilities,
equipment operations, or procedures where such action is reasonably required in the
operation of its business and is not inconsistent with the rules and regulations in FCC
Part 68. If such changes can be reasonably expected to render any customer terminal
equipment incompatible with telephone company communications facilities, or
require modification or alteration of such terminal equipment, or otherwise materially
affect its use or performance, the customer shall be given adequate notice in writing,
to allow the customer an opportunity to maintain uninterrupted service.
Ringer Equivalence Number
The Ringer Equivalence Number and FCC Registration Number for this product may
be found on the label located on the bottom or rear of the product. In some instances
you may need to provide these numbers to the telephone company.
The Ringer Equivalence Number (REN) is a measure of the electrical load placed on
the telephone line, and is useful for determining whether you have “overloaded” the
line. Installing several types of equipment on the same telephone line may result in
problems making and receiving telephone calls, especially ringing when your line is
called. The sum of all Ringer Equivalence Numbers of the equipment on your
telephone line should be less than five in order to assure proper service from the
telephone company. In some cases, a sum of five may not be usable on your line. If
any of your telephone equipment is not operating properly, you should immediately
remove it from your telephone line, as it may cause harm to the telephone network.
WARNING:
FCC Regulations state that changes or modifications to this equipment not expressly
approved by the manufacturer could void the user’s authority to operate this
equipment. In the event that terminal equipment causes harm to the telephone
network, the telephone company should notify the customer that service may be
stopped. However, where prior notice is impractical, the company may temporarily
cease service, providing that they:
a) Promptly notify the customer.
b) Give the customer an opportunity to correct the equipment problem.
c) Inform the customer of the right to bring a complaint to the Federal
Communication Commission pursuant to procedures set out in FCC Rules and
Regulations Subpart E of Part 68.
viii
You should also know that:
• Your product is not designed to be connected to a digital PBX system.
• If you intend to use a computer modem or fax modem on the same phone line as
your product, you may experience transmission and reception problems with all
the equipment. It is recommended that no other equipment, except for a regular
telephone, share the line with your product.
• If your area experiences a high incidence of lightning or power surges, we
recommend that you install surge protectors for both the power and the telephone
lines. Surge protectors can be purchased from your dealer or telephone and
electronic specialty stores.
• When programming emergency numbers and/or making test calls to emergency
numbers, use a non-emergency number to advise the emergency service
dispatcher of your intentions. The dispatcher will give you further instructions on
how to actually test the emergency number.
• This product may not be used on coin service or party lines.
• This product provides magnetic coupling to hearing aids.
• You may safely connect this equipment to the telephone network by means of a
standard modular jack, USOC RJ-11C.
Declaration of Conformity (European Countries)
Approvals and Certifications
The CE marking applied to this product symbolises Samsung
Electronics Co., Ltd. Declaration of Conformity with the following
applicable 93/68/EEC Directives of the European Union as of the
dates indicated:
January 1, 1995: Council Directive 73/23/EEC Approximation of the laws of the
member states related to low voltage equipment.
January 1, 1996: Council Directive 89/336/EEC (92/31/EEC), approximation of the
laws of the Member States related to electromagnetic compatibility.
March 9, 1999: Council Directive 1999/5/EC on radio equipment and
telecommunications terminal equipment and the mutual recognition of their
conformity.
A full declaration, defining the relevant Directives and referenced standards can be
obtained from your Samsung Electronics Co., Ltd. representative.
ix
EC Certification
Certification to 1999/5/EC Radio Equipment & Telecommunications
Terminal Equipment Directive (FAX)
This Samsung product has been self-certified by Samsung for pan-European single
terminal connection to the analogue public switched telephone network (PSTN) in
accordance with Directive 1999/5/EC. The product has been designed to work with
the national PSTNs and compatible PBXs of the European countries:
In the event of problems, you should contact the Euro QA Lab of Samsung Electronics
Co., Ltd. in the first instance.
The product has been tested against TBR21. To assist in the use and application of
terminal equipment which complies with this standard, the European
Telecommunication Standards Institute (ETSI) has issued an advisory document (EG
201 121) which contains notes and additional requirements to ensure network
compatibility of TBR21 terminals. The product has been designed against, and is fully
compliant with, all of the relevant advisory notes contained in this document.
Replacing the Fitted Plug (for UK Only)
IMPORTANT
The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and
has a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct
13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover,
do not use the plug until you have another fuse cover.
Please contact the people from you purchased the machine.
The 13 amp plug is the most widely used type in the UK and should be suitable.
However, some buildings (mainly old ones) do not have normal 13 amp plug sockets.
You need to buy a suitable plug adaptor. Do not remove the moulded plug.
WARNING
If you cut off the moulded plug, get rid of it straight away.
You cannot rewire the plug and you may receive an electric shock if you plug
it into a socket.
x
IMPORTANT WARNING: You must earth this machine.
The wires in the mains lead have the following colour code:
• Green and Yellow:
Earth
• Blue:
Neutral
• Brown:
Live
If the wires in the mains lead do not match the colours marked in your plug, do the
following:
You must connect the green and yellow wire to the pin marked by the letter `E', or
by the safety `Earth symbol' or coloured green and yellow or green.
You must connect the blue wire to the pin which is marked with the letter `N' or
coloured black.
You must connect the brown wire to the pin which is marked with the letter `L' or
coloured red.
You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.
xi
xii
1
GETTING STARTED
Thank you for purchasing Samsung multifunctional
product. This product provides printing, copying,
scanning, and faxing (SCX-5312F only) functions!
This chapter provides step-by-step instructions on
setting up the product, and installing the software.
This chapter includes:
• Unpacking
• Component Location
• Control Panel Functions
• Making Connections
• Installing Drum and Toner Cartridges
• Turning the Product On
• Loading Paper
• Setting the Paper Size
• Changing the Display Language
• Using Save Mode
Unpacking
1 Remove the shipping tapes from the front, back, and sides
of the prodcut.
Tape
2 Remove the label completely from the scanner module by
pulling it straight, and the scan unlock switch automatically
moves to the unlock position (
).
Scanner
module
NOTE: To scan or copy a document, the
switch must be on that position. When you
are moving the product or do not use the it
for a long time, pull the switch toward the
Lock mark (
).
3 Pull open the paper cassette and remove the packing
material from the paper cassette.
1.2
GETTING STARTED
4 Ensure that you have the following:
1
USB Cable
AC Power Cord*
Telephone Line Cord*
TAM Lead
(For SCX-5312F only)
(For SCX-5312F UK only)
This User’s Guide,
SmarThru User’s Guide,
Facsimile User’s Guide
(SCX-5312F only),
Quick install Guide
Software CD
Starter Toner Cartridge
Drum Cartridge
*. The appearance of the power cord and the telephone line cord
vary according to countries.
NOTE: You can purchase and install the optional Network Print Server. For
details, refer to the documentation supplied with your Network Print Server.
GETTING STARTED
1.3
Component Location
Take a moment to familiarise yourself with the main components
of your product.
Front View
Automatic
Document Feeder
Document
Guides
Document
Input Tray
Control Panel
(See page 1.6. SCX5312F. See page 1.9 for
SCX-5112.)
Document
Output Tray
Paper Guides
Bypass Tray
Scanner Module
Paper Cassette
Release lever
Front Cover
1.4
GETTING STARTED
Side Cover
Rear View
1
Document Cover
ADF (Automatic Document
Feeder) Connector
Document
Glass
Telephone
Connections
(available in
SCX-5312F only)
Paper Cassette
AC Power Cord
Connector
Parallel Connector
Power Switch
USB Connector
Paper Exit Extension
GETTING STARTED
1.5
Control Panel Functions
SCX-5312F
1
2
4
3
5
6
7
13
8
01
21
03
23
04
24
05
25
System Data
System ID
Date & Time
System Setup
Memory Clear
06
26
07
27
08
28
09
29
10
30
Polling
Add/Cancel
Delay TX
11
31
Memory TX
12
32
Priority TX
13
33
14
34
Tx Confirm
Schedule Job
16
36
17
37
18
38
19
39
20
40
Phone Book
System List
Tx Journal
Rx Journal
Help List
Group Dial
1
02
22
Maintenance
15
35
9
10
11
12
Use to store frequently dialed fax number and
dial them with a touch of the buttons. Also use
in conjunction with the Menu/Exit button to
access the corresponding menu functions.
Allows you to shift one-touch buttons to the
locations 21 through 40.
Adjusts the resolution of the documents for the
current fax job.
Use to choose the receive mode. The selected
mode is displayed in Standby mode.
Use to search for number in memory. Also use
to delete digit in the edit mode.
2
Use to store frequently dialed fax number and
dial them using the 2-digit speed number. Also
use to display alternatively the currently active
and pending jobs.
F
A
X
Redials the last number in Standby mode or
insert a pause into a fax number in the edit
mode.
*
1.6
GETTING STARTED
Use to perform a switch-hook operation such as
call waiting.
When an error occurs, the lamp in the
corresponding location on the Status map turns
on as well as the error indicator, and the error
message appears on the display so that you can
locate the error. For details on the meaning of
the error messages, see page 8.11.
(status map)
ex) The paper is jammed in the exit area.
3
Turns on when a paper jam occurs. To clear
the jam, see page 8.4.
Turns on when the toner or drum almost
runs out. To replace the toner or drum
cartridge, see page 7.3 and page 7.8.
(Error
indicators)
Turns on when the input tray you are using
is empty. To load paper, see page 1.17.
Turns on when an error occurs on the
system.
4
Displays current status and prompts during
operation.
Use to adjust the contrast of the documents for
the current copy or fax job.
5
C
O
P
Y
Use to select the text type for the current copy
job or fax job.
Use to specify the paper tray you want to use in
the Fax or the Copy mode.
Use to set up special copy features such as
AutoFit, Clone, and Collation.
Use to print the current copy job on both sides
of paper.
6
Use to dial a number or enter alphanumeric
characters.
GETTING STARTED
1.7
1
7
S
A
V
E
8
Allows you to save toner by using less toner to
print a document.
Allows you to save power by reducing power
consumption when not printing.
Allows you to save paper by printing 2 pages on
a single sheet of paper (available in the Copy
mode only).
Enters the menu functions in conjunction with
the one-touch buttons. Also backs you up to the
previous menu level or exits the menu.
Scrolls though the menu items. When you set
the copy size or the copy page number, they can
be used to change the number.
9*
Scrolls though the option available for the
selected menu item. In the Copy mode,
allows you to change the zoom rate and to
change the number of copies.
10
Selects the mode to activate: FAX or COPY. Also,
confirms the selection on the display.
11
Engages the telephone line.
12
Use to start a job.
13
Use to stop an operation at any time.
Also, use to clear/cancel the copy options such
as the zoom rate and multi copy pages in the
Copy mode.
* Navigation key
1.8
GETTING STARTED
SCX-5112
2
1
3
4
5
1
10
7
6
8
9
When an error occurs, the lamp in the
corresponding location on the Status map turns on
as well as the error indicator, and the error
message appears on the display so that you can
locate the error. For details on the meaning of the
error messages, see page 8.11.
(status map)
ex) The paper is jammed in the exit area.
1
Turns on when a paper jam occurs. To clear
the jam, see page 8.4.
Turns on when the toner or drum almost runs
out. To replace the toner or drum cartridge,
see page 7.3 and page 7.8.
(Error
indicators)
Turns on when the input tray you are using is
empty. To load paper, see page 1.17.
Turns on when an error occurs on the system.
2
Displays current status and prompts during
operation.
GETTING STARTED
1.9
Use to adjust the contrast of the documents for the
current copy job.
Use to select the text type for the current copy job.
3
C
O
P
Y
Use to specify the paper tray you want to use in
the Copy mode.
Use to collate the copied documents.
Use to print the original image to fit to the page
(Auto Fit) or to print multiple copies on a single
page (Clone).
Use to print the current copy job on both sides of
paper.
4
5
S
A
V
E
6
Use to enter numbers.
Allows you to save toner by using less toner to
print a document.
Allows you to save power by reducing power
consumption when not printing.
Allows you to save paper by printing 2 pages on a
single sheet of paper (available in the Copy mode
only).
Enters menu mode.
Scrolls though the menu items. When you set the
copy size or the copy page number, they can be
used to change the number.
7
Scrolls though the option available for the selected
menu item. The button allows you to change the
zoom rate and the button to change the number
of copies.
8
Confirms the selection on the display.
9
Use to start a job.
10
1.10 GETTING STARTED
Use to stop an operation at any time.
Also, use to clear/cancel the copy options such as the
zoom rate and multi copy pages in the Copy mode.
Making Connections
1 Connect the ADF(Automatic Document Feeder) cord to this
port and fasten the side screws.
NOTE: Without connecting the cord to the port, you cannot use
the ADF.
2 If you have SCX-5112:
Skip this step and proceed to step 3.
If you have SCX-5312F:
Connect the supplied telephone line to the LINE jack and
the other end to the wall jack.
GETTING STARTED
1.11
1
If you want to use your product for receiving both faxes and
voice calls, you will need to connect a telephone and/or
answering machine to your product.
Plug the cord of your extension phone or answering
machine into the EXT jack.
UK users should plug the cord of the extension phone into
the supplied TAM lead and plug the cord of the TAM lead
into the EXT jack on the back of your product.
TAM lead
(For UK users only)
NOTES:
• For UK users, it is strongly recommended to use the TAM lead
and the telephone line cord supplied with your product.
• If you are replacing the line cord with other manufacturer’s, it
should be AWG #26 or lower guage.
1.12 GETTING STARTED
3 Connect the USB cable which came with your product.
1
If you want to use a parallel printer cable, purchase only
IEEE-1284 compliant parallel cable and connect it to the
parallel connector on your product.
NOTE:
• To connect the printer to the parallel port of the computer
requires a certified parallel cable.
You will need to buy the IEEE1284 compliant cable.
• You only need to connect one of the above cables.
• If you are using a USB cable, you must be running Windows 98/
Me/2000/XP.
• When using USB connection, your product provides two USB
modes: Fast and Slow. Fast is the default mode. Some PC user
may experience poor USB implementation in the default mode. If
this occurs, select Slow mode to achieve successful results. For
details on changing USB mode, see page 8.16.
GETTING STARTED
1.13
Installing Drum and Toner
Cartridges
1 Pull the release lever to open the side cover.
CAUTION: Ensure that the side cover is always open before
opening the front cover.
2 Open the front cover.
3 If the cartridge locking lever is on the lower position, turn
the lever upward until it locks into place.
1.14 GETTING STARTED
4 Remove the drum cartridge from its bag and slide it into the
product firmly until it locks into place completely.
1
5 Remove the starter toner cartridge from its bag. Gently
shake the cartridge to loosen the toner.
Thoroughly shaking the cartridge will assure maximum
copies per cartridge.
6 Slide the toner cartridge into the product aligning the
cartridge to the left of the slot until it locks into place
completely.
GETTING STARTED
1.15
7 Turn the cartridge locking lever downwards until it locks into
place.
8 Close the front cover
1
and the side cover
2
.
2
1
NOTE: When the drum or toner cartridge need to be replaced, the
display indicates the corresponding message with the error
indicator. Refer to the list of error messages on page 8.11.
To replace the drum and toner cartridges, see page 7.8 and
page 7.3 repectivly.
1.16 GETTING STARTED
Turning the Product On
1 Plug one end of the supplied three-wire electrical grounding
type cord into the AC socket on the product and the other
end into a properly grounded AC outlet.
2 Turn on the power switch. “WARMING UP PLEASE WAIT”
appears on the display indicating the product is on.
To view your display text in another language, see
page 1.20.
Loading Paper
The paper cassette can hold a maximum of 550 sheets of 20lb
plain paper. For copying or faxing, you can use A4-, letter-, or
legal-size paper only.
1 Pull open the paper cassette.
GETTING STARTED
1.17
1
2 Push down on the pressure plate until it locks in position.
3 Adjust the rear paper guide to the desired paper length. It
is preset to Letter or A4 size depending on country. To load
another size, lift and insert the rear guide into the
corresponding position.
LG
L
FO
LIO
A4
LT
R
Rear guide
4 Fan the paper and insert it into the cassette.
1.18 GETTING STARTED
5 Ensure that the paper corners are under the corner
snubbers.
1
Corner snubber
Do not fill above the max fill line.
Max Fill Line
6 While squeezing the side guide as shown, move it toward
the stack of paper until it lightly touches the side of the
stack. Do not too tightly to press the guide the edge of the
paper; the guide may bend the paper.
7 Close the paper cassette.
GETTING STARTED
1.19
Setting the Paper Size
After loading paper in the paper cassette, you have to set the
paper size using the control panel buttons. These settings will
apply to the Copy mode only. In PC printing mode, you have to
select the paper size in the application program you use.
1 Press Menu/Exit and then System Data from the onetouch dial keypad. SCX-5112 us