Cypress CLUX-22HC Operation Manual

Add to my manuals
16 Pages

advertisement

Cypress CLUX-22HC Operation Manual | Manualzz

CLUX-22HC

HDMI/CAT6 to HDMI/

CAT6 Splitter Switcher

Operation Manual

CLUX-22HC

Disclaimers

The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.

Cypress Technology reserves the right to make improvements to this document and/or product at any time and without notice.

Copyright Notice

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means

- electronic, mechanical, magnetic, optical, chemical, manual, or otherwise - without express written permission and consent from

Cypress Technology.

© Copyright 2009 by Cypress Technology.

All Rights Reserved.

Version 1.0 December 2009

Trademark Acknowledgments

All products or service names mentioned in this document may be trademarks of the companies with which they are associated.

Safety Precautions

Please read all instructions before attempting to unpack or install or operate this equipment, and before connecting the power supply.

Please keep the following in mind as you unpack and install this equipment:

Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.

To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.

Never spill liquid of any kind on or into this product.

Never push an object of any kind into this product through module openings or empty slots, as you may damage parts.

Do not attach the power supply cabling to building surfaces.

Do not allow anything to rest on the power cabling or allow it to be abused by persons walking on it.

To protect the equipment from overheating, do not block the slots and openings in the module housing that provide ventilation.

Revision History

Version No Date Summary of Change

V1

V2

VR3

20091208 Preliminary Release

20101116 IR Connection in Pg. 7

20120416 IR Frequency

Table of Contents

1. Introduction…………………………………………………........……….

2. Applications……………………..…………………………................….

3. Package Contents…………………………......…………….............…

4. System Requirements……...…………………..….…………........…….

5. Features…………………………………………….......……........………

6. Specifications..………………………………………...........………...….

7. Operation Controls and Functions………………...……........………

7.1 Front Panel ...............................................................................

7.2 Rear Panel……………......………………………….........…….…

8. RJ-45 Pin Definitions …….………………….......................…..…..…...

9. Connection and Installation.............................................................

10. Acronyms ...........................................................................................

4

4

2

3

1

1

1

1

7

9

5

6

1. Introduction

The HDMI/CAT6 to HDMI/CAT6 Splitter Switcher is the most advanced solution for HDMI and Video/DDC signal distribution. This CAT6 output port can be easily connected to an HDMI receivers CAT6 input port to allow a stable connection between an HDMI source and any compatible display.

Each product in this series is compatible to HDMI V1.3, which defines and supports the transfer of Deep Color (10bit and 12bit) video and a new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master

Audio) digital audio signal, with a high bandwidth up to 225MHz (6.75Gbps).

Besides splitting and distributing, the Video/DDC CAT6 output also does signal amplification and equalization which provide high performance I/O of audio and video.

2. Applications

Home entertainment integration

Multi-task project presentation

Showroom Display

Advertising display control

System installation control

3. Package Contents

1 x HDMI/CAT6 to HDMI/CAT6 Splitter Switcher

5V DC power supply adaptor

User Manual

4. System Requirements

Input source equipment(s) with HDMI cable and or HDMI to CAT6 transmitter

Output display(s) with HDMI cable and or CAT6 to HDMI receiver with

HDMI cable to display

1

5. Features

HDMI 1.3, HDCP1.1 and DVI1.0 compliant.

Deep color video up to 12bit, 1080p@(24/60)Hz.

Simultaneously outputs one HDMI and one Video/DDC CAT6 source to one HDMI and one Video/DDC CAT6 output.

HDCP keysets allows each output to work independently when connecting to an HDMI display.

Capable of splitting HDMI/CAT6 sources to HDMI/CAT6 outputs without any signal loss.

Supports LPCM7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD master audio transmission (32-192 kHz Fs sample rate).

Supports a wide range of PC and HDTV resolutions from VGA to SXGA and 480i to 1080p.

Full HDCP Compliant.

According to tests The Input/Output source can be up to 15/15 meters away when the HDMI cable has a resolution of with 1080p/8bits. The

CAT6 cable test showed that with a resolution of 1080p/8bits, the Input/

Output source can be 45/45 meters away. The HDMI cable test showed that with a resolution of 1080p/12bits, the Input/Output source can be

15/10 meters away. And finally the CAT6 cable test showed that with a resolution of 1080p/12bits, the Input/Output source can be 20/20 meters away

2

6. Specifications

Video Bandwidth

Input Ports

Output Ports

EDID

HDMI Audio Output

2.25MHz/6.75Gbps

1 x HDMI female port (Type A connector)

1 x CAT6 input Video/1 x CAT6 input DDC

1 x CAT6 output Video/1 x CAT6 output DDC

1 x HDMI female ports (Type A connector)

STD / TV

PCM2, 5.1, 7.1, Dolby 5.1, DTS 5.1, DD+, D-TrueHD,

DTS-HD

HDMI Cable In

HDMI Cable Out

CAT6 Cable In

CAT6 Cable Out

HDMI Resolution

IR Frequency

ESD Protection

Power Supply

Dimensions (mm)

Weight(g)

1080p 8-bit (15M), 12-bit (15M)

1080p 8-bit (15M), 12-bit (10M)

1080p 8-bit (45M), 12-bit (20M)

1080p 8-bit (45M), 12-bit (20M)

480i, ~ 1080p 50/60, 1080p 24, VGA ~ SXGA

30 ~ 50KHz

Human body model: ± 8kV (air-gap discharge)

± 4kV (contact discharge)

5VDC/3.2A (US/EU standards, CE/FCC/UL certified)

215(W) x123(D) x 30(H)

365

Chassis Material

Silkscreen Color

Metal

Silver

Power Consumption 4.1W

Operating Temperature 0˚C ~ 40˚C / 32˚F ~ 104˚F

Storage Temperature

Relative Humidity

-20˚C ~ 60˚C / -4˚F ~ 140˚F

20~90% RH (non- condensing)

3

7. Operation Controls and Functions

The following sections describe the hardware components of the unit.

7.1 Front Panel

1 2 3 4 5 6

HDMI/CAT6 input selection: Switch to select input sources from either

HDMI or CAT6.

EDID Control Switcher: The default factory setting is TV, do not switch if the display is compatible. Switch to STD to use built-in EDID.

[Note]:

1. When EDID is switched to TV, the unit will detect and record the first HDMI’s output EDID in the unit. If the first detected HDMI output is DVI it will continue to pass on to the next output until the first HDMI output is found.

The detection priority is HDMI v1.3 > HDMI v1.2 > DVI.

2. When EDID is switched to STD the unit will use its own EDID which supports:

Video →1080p 8-bit (max)

Audio →PCM 2CH

3. When EDID is switched to STD with input selection on HDMI or CAT6 IN the display TV or monitor, they will automatically switch to HDMI input 1. When

EDID is switched to TV regardless of the input selection the display TV or monitor will switch to HDMI input mode 1. Therefore it is not suggested to switch the EDID to STD.

4. The EDID selection will activate only when the unit is plugged in and power is on.

CEC output: Only when switched to HDMI, the HDMI’s output port CEC will bypass the CEC and proceed directly to the HDMI and CAT6 input ports.

When switched to HDMI and CAT6, the HDMI and CAT6 output ports CEC will bypass the CEC and go proceed directly to the HDMI.

HDMI Input: Connect input port to the HDMI or DVI output port of your

4

source equipment such as DVD player or set-top-box.

CAT6 IN: These slots are for connecting the Video/DDC input to the

Video/DDC output of the transmitter unit with CAT6 cables.

[Note]:

1. Cable tested with CAT6 / 23AWG / was solid, so any cables with different specifications might result in a different distance.

2. The cable distance was tested with a PS3 40G and 37" SamSung 12 bits LCD TV.

3. The figures provided in this manual are for reference use only, actual results depend on your specific configuration, i.e.: your source and display and type of cabling used.

DC 5V: This is the slot where you insert the 5V DC power supply for electrical power before plugging the adaptor into an AC wall outlet.

7.2 Rear Panel

3 5

1 2 4 6

CAT6 OUT: Connect the Video/DDC output to the Video/DDC input of the receiver unit using CAT6 cables.

HDMI OUT: Connect HDMI output port to the HDMI display.

HDCP indicators: When the input source has HDCP protection the HDCP

LED will turn on.

The LED light will turn when the HDMI or DVI source has been connected.

HDMI/CAT6 input indicator: The LED light will turn on when the HDMI or

CAT6 source has been selected.

Link OUT: The LED light will turn on when the display has been connected.

5

8. RJ-45 Pin Definitions

5

6

7

8

3

4

Pin

1

2

Video

TX2+

TX2-

TX1+

TX0+

TX0-

TX1-

TXC+

TXC-

DDC

DDC Bus Clock

NC

DDC Bus Data

Power 5V

GND

IR IN

HPD

C EC

6

CH-106TX CH-1

HDMI

VIDEO

DDC

HDMI Cable

HDMI

CH-106TX CH-1

3m

7m

60°

3m

HDMI

VIDEO

DDC

CAT6 OUTPUT

VIDEO

DDC

HDMI

HDMI Cable

7

CH-106TX CH-1

HDMI

VIDEO

DDC

HDMI Cable

HDMI

CH-106TX CH-1

3m

7m

60°

3m

HDMI

VIDEO

DDC

CAT6 OUTPUT

VIDEO

DDC

HDMI

HDMI Cable

VIDEO

DDC

HDMI Cable

VIDEO

DDC

HDMI Cable

HDMI Cable

8

Acronyms

Acronym

CAT6

DVI

EDID

HDCP

HDMI

HDTV

IR

LPCM

STD

SYNC

SXGA

VGA

Complete Term

Category 6 cable

Digital Visual Interface

Extended Display Identification Data

High-Bandwidth Digital Content Protection

High-Definition Multimedia Interface

High-Definition Television

Infrared

Linear Pulse Code Modulation

Standard

Synchronize

Super Extended Graphics Array

Video Graphics Array

A

9

CYPRESS TECHNOLOGY CO., LTD.

Home page: http://www.cypress.com.tw

20091217 MPM-CLUX22HC

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement