Operating Sticks Brochure

www.dehn.de

RST

Rescue Rods

SZ

Fuse Tongs

SCS

Switching Sticks

IS

Insulating Sticks

IS STK

Insulating Stick Kit

Selection Guide Safety Equipment

Operating Sticks

Device Nominal Voltage U

N

/ Frequency f

N

Application Page

IS STK up to 36 kV / 50 Hz Suitable for use in wet weather conditions 48

Insulating Stick Kit For use in indoor and outdoor installations 50

Plug-in coupling protected against twisting

and bridging

Easy transport due to detachable sticks

Kits for a variety of applications

For use as switching stick, earthing stick

or operating stick

IS Insulating Sticks up to 123 kV / 50 Hz For use in wet weather conditions 52

For use in indoor and outdoor installations 54

Attachable switching stick head allows for use as

switching stick

Supporting head for hexagon shaft or T pin shaft

For use as earthing stick

For use as operating stick for insulating protective shutters

SCS Switching Sticks up to 123 kV / 50 Hz For use in wet weather conditions 56

For indoor and outdoor installations 57

Fully insulated, massive switching stick head

Allows deep access into the installation

For use as operating stick for insulating protective

shutters

SZ Fuse Tongs up to 36 kV Not suitable for use in wet weather conditions 58

Operating head with two adjustable jaws

Straight or 20° angled operating head

Secure clamping

Wide clamping range

∅30 ... 90 mm

RST Rescue Rods up to 36 kV / 50 Hz Not suitable for use in wet weather conditions 60

For use in indoor and outdoor installations

Fully insulated and fixed rescue hook

For rescuing persons weighing up to approximately

100 kg from the live working zone in the event of an

electrical accident

Storage Bags and Transport Cases Sheet metal or plastic case 187

Artificial leather or canvas bag

Maintenance tests

According to German regulations (BGV A3), operating sticks have to be tested for compliance with the prescribed limits as stated in the

Electrical Safety Rules. This test is performed in the high voltage test laboratory of DEHN + SÖHNE and includes

– measurement of the leakage current,

– test for protection against bridging,

– visual inspection, manual tests and measurements.

This maintenance test is documented in a test report and on the device.

Prior to each use, operating sticks must be visually inspected for signs of damage or any other defect.

Accessory, kit parts and spare parts from page 195

47

IS STK


IS


SCS


SZ

Fuse Tongs

RST

Rescue Rods

IS STK Insulating Stick Kit with Silicon Rubber Insulator

Nominal voltages up to 36 kV / 50 Hz

Safety Equipment


Easy and safe working

• Cost-effective due to universal use

• Space-saving transport

IS STK insulating stick fitted with STK switching stick head used as switching stick

General Information:

Standard (switching stick head) DIN VDE 0681 Part 2

Standard (insulating stick) EN/IEC 61243-1 (DIN VDE 0682 Part

411) test for protection against bridging (section 6.3.2) after wet test and leakage current measurement

(section 7.1.2)

Standard (switching stick) DIN VDE 0681 Part 1 and 2

Standard (operating stick) DIN VDE 0682 Part 552

Standard (earthing stick) Based on EN/IEC 61230

(DIN VDE 0683 Part 100)

Use Suitable for use in wet weather conditions

For Indoor and outdoor installations

Kit includes:

Pos. No. Part No. Pos. No. Part No.

1

2

3

766 164

766 365

766 465

6

7

8

766 468

766 456

766 466

4

766 356

9

766 996

5

766 367

For more detailed information on these products, see Accessory chapter

The artificial leather bag with reinforced back panel allows for safe transport and easy storage of the single components.

Dirt-repellent end fittings with plug-in coupling

Anti-rotation plastic plug-in coupling used as insulating stick extension

(yellow coupling)

Accessory for IS STK Insulating Stick Kit

Operating Head with plug-in Coupling / hexagon Shaft

For indoor use

Type AK 36 SK STK 330

Part No. 766 364

Diameter 30 mm

Total length (l

G

) 330 mm

Material Plastic

Colour Yellow

766 364

240 g

1 pc(s)

AK 36 SK STK 330

766 364

Arbeitskopf bis 36kV 50Hz Spindel Sechs- kant m. Steckkupplung L 330 mm

48

Accessory, kit parts and spare parts from page 195 www.dehn.de

766 324

4.5 kg

1 pc(s)

SCSSN 36 STK 30

766 324

Schaltstangenset 36kV mit Steckkupplung Auch bei Niederschlägen verwendbar

766 326

4.3 kg

1 pc(s)

ASSN 36 STK 30

766 326

Arbeitsstangenset 36kV mit Steckkupplung Auch bei Niederschlägen verwendbar

766 453

5.3 kg

1 pc(s)

ASSN 36 STK 43

766 453

Erdungsstangenset 36kV mit SteckkupplungAuch bei Niederschlägen verwendbar

766 451

6.2 kg

1 pc(s)

ESSN STK 43

766 451

Erdungsstangenset 36kV mit SteckkupplungAuch bei Niederschlägen verwendbar www.dehn.de



5

5

RST

Rescue Rods

8

8

6

7

9

9

SZ

Fuse Tongs

SCS


IS


IS STK


IS STK Insulating Stick Kit with Silicon Rubber Insulator

Switching Stick Kit (

∅30 mm) l

G max

(1 + 4 + 4 + 5)

4 1

4

+

Possible lengths:

Length l

G

3420 mm

2590 mm

1760 mm

No.

1 + 4 + 4 + 5

1 + 4 + 5

1 + 5

Type SCSSN 36 STK 30

Part No. 766 324

Nominal voltage (U

N

) Up to 36 kV

Max. total length (I

G max

) 3450 mm

Operating Stick Kit (

∅30 mm) l

G max

(1/2 + 4 + 5)

4

Permissible loads for the insulating stick kit:

Length l

G

2590 mm

No.

1 + 4 + 5

Max. load on the operating head

5 kg

2390 mm

1760 mm

1560 mm

2 + 4 + 5

1 + 5

2 + 5

5 kg

12 kg

12 kg

1

2

+

Type ASSN 36 STK 30

Part No. 766 326

Nominal voltage (U

N

) Up to 36 kV


G max

) 2590 mm

9

l

G max

(1/2 + 4 + 6 + 7)

4

Operating Stick Kit (

∅43 mm)

1

2

+


Length l

G

3420 mm

3220 mm

2590 mm

2390 mm

1760 mm

1560 mm

No.

1+4+6+7

2+4+6+7

1 + 4 + 6

2 + 4 + 6

1 + 6

2 + 6


9 kg

9 kg

9 kg

9 kg

25 kg

35 kg

Type ASSN 36 STK 43

Part No. 766 453

Nominal voltage (U

N

) Up to 36 kV


G max

) 3420 mm

9

l

G max

(2/3 + 6 + 8 + 8)

Earthing Stick Kit (

∅43 mm)

2

6

3

+


Length l

G

3960 mm

2760 mm

1560 mm

No.

2/3+6+8+8

2 / 3 + 6 + 8

2 / 3 + 6


8 kg

14 kg

35 kg

Type ESSN STK 43

Part No. 766 451


G max

) 3960 mm


49

IS STK


IS


IS STK Insulating Stick Kit


SCS


SZ

Fuse Tongs

RST

Rescue Rods



• Easy and safe working

• Cost-effective due to universal use

• Space-saving transport

IS STK insulating stick fitted with STK switching stick head used as switching stick



Standard (insulating stick) DIN VDE 0681 Part 1

Standard (switching stick) DIN VDE 0681 Part 1 and 2


Standard (earthing stick) Based on EN/IEC 61230

(DIN VDE 0683 Part 100)

Use Not suitable for use in wet weather conditions


Kit includes:

Pos. No. Part No. Pos. No. Part No.

1

2

3

766 164

766 365

766 465

6

7

8

766 463

766 456

766 466

4

766 356

9

766 996

5

766 363

For more detailed information on these products, see Accessory chapter

The artificial leather bag with reinforced back panel allows for safe transport and easy storage of the single components.

Dirt-repellent end fittings with plug-in coupling

Anti-rotation plastic plug-in coupling used as insulating stick extension

(yellow coupling)

50


Accessory for IS STK Insulating Stick Kit

Operating Head with plug-in Coupling / hexagon Shaft

For indoor use

Type AK 36 SK STK 330

Part No. 766 364

Diameter 30 mm

Total length (l

G

) 330 mm

Material Plastic

Colour Yellow

766 364

240 g

AK 36 SK STK 330

766 364

Operating head up to 36kV 50Hz hexagon shaft with plug-in coupling L

330 mm www.dehn.de

766 323

1614

5.8 kg

SCSS 36 STK 30

766 323

Switching stick kit 36kV D 30mm with plug-in coupling

766 325

1614

5.6 kg

ASS 36 STK 30

766 325

Operating stick kit -36kV D 30mm L 2600mm with plug-in coupling

766 452

1614

6.6 kg

ASS 36 STK 30 43

766 452

Operating stick kit -36kV D 30/43mm L 2600mm with plug-in coupling



5

5

RST

Rescue Rods

8

8

6

7

SZ

Fuse Tongs

SCS


IS


IS STK


IS STK Insulating Stick Kit

Switching Stick Kit (Ø30 mm)

l

G max

(1 + 4 + 4 + 5)

4

4

1

9

Possible lengths:

Length l

G

3420 mm

2590 mm

1760 mm

No.

1 + 4 + 4 + 5

1 + 4 + 5

1 + 5 l

G max

(1/2 + 4 + 5)

4

Type SCSS 36 STK 30

Part No. 766 323

Nominal voltage (U

N

) Up to 36 kV


G max

) 3420 mm

Operating Stick Kit (Ø30 mm)

1

2

9


Length l

G

2590 mm

No.

1 + 4 + 5


5 kg

2390 mm

1760 mm

1560 mm

2 + 4 + 5

1 + 5

2 + 5

5 kg

12 kg

12 kg

Type ASS 36 STK 30

Part No. 766 325

Nominal voltage (U

N

) Up to 36 kV


G max

) 2590 mm l

G max

(1/2 + 4 + 6 + 7)

4

Operating Stick Kit (Ø43 mm)

1

2

9


Length l

G

3420 mm

3220 mm

2590 mm

2390 mm

1760 mm

1560 mm

No.

1+4+6+7

2+4+6+7

1 + 4 + 6

2 + 4 + 6

1 + 6

2 + 6


9 kg

9 kg

9 kg

9 kg

25 kg

35 kg

Type ASS 36 STK 30 43

Part No. 766 452

Nominal voltage (U

N

) Up to 36 kV


G max

) 3420 mm l

G max

(2/3 + 6 + 8 + 8)

6

Earthing Stick Kit (Ø43 mm)

2

3

ESS STK 43

766 450

Earthing stick kit -36kV D 43mm L 4000mm with plug-in coupling

766 450

1614

7.6 kg www.dehn.de

9


Length l

G

3960 mm

2760 mm

1560 mm

No.

2/3+6+8+8

2 / 3 + 6 + 8

2 / 3 + 6


8 kg

14 kg

35 kg

Type ESS STK 43

Part No. 766 450


G max

) 3960 mm


51

IS STK


IS


SCS


SZ

Fuse Tongs

RST

Rescue Rods

IS Insulating Sticks with Silicon Rubber Insulator





• Cost-effective since the installation of different supporting heads allows universal use

• Easy to use

Switching stick head screwed on an IS SK insulating stick for switching a switch disconnector





(section 7.1.2)




Material Glass-fibre reinforced polyester tube

End fitting Non-slip plastic cap / plug-in coupling for extending the handle

SSK M12 switching stick head screwed on ISN SK insulating stick

ISN SQ insulating stick fitted with

SSK SQ switching stick head. The insulating stick can be additionally locked by means of the black knurled nut.

The handle of

ISN STK insulating sticks can be easily extended via the plug-in coupling

Accessory for IS Insulating Sticks, rain-proof

Screw-on Switching Stick Head for IS SK


With M12 thread

In accordance with DIN VDE 0681 Part 2

Type SSK M12

Part No. 765 005

Material Steel, plastic-sheathed

765 005

116,7 g

1

ST

SSK M12

765 005

Schaltstangenkopf m. Gewinde M12

ISN SK insulating stick used for clamps with hexagon shaft of earthing and short-circuiting devices

52


Switching Stick Head for IS SQ Insulating

Sticks

With T pin shaft (bayonet locking mechanism)


T pin shaft in accordance with DIN 48087

Switching stick head is fixed on the insulating stick via the knurled nut

Type SSK SQ

Part No. 765 009

Material Polyamide

765 009

145 g

1

ST

SSK SQ

765 009

Schaltstangenkopf m. Spindel Querstift www.dehn.de



RST

Rescue Rods

SZ

Fuse Tongs

SCS


IS


IS STK


IS Insulating Sticks with Silicon Rubber Insulator

Insulating stick, hexagon Shaft

l

G l

O l

G

Insulating stick, T Pin Shaft

l

O

1 pc(s)

766 215

0.01 g

1 pc(s)

766 211

0.01 g

Isolierstange 36kV SQ L 1000mm Auch bei

Niederschlägen verwendbar

ISN 36 SQ 1500

0.01 g

1

766 210

Isolierstange 36kV M12 SK L 1000mm Auch bei


ISN 36 SK 1500

With M12 thread and spring locking mechanism

– Can be used as switching stick by attaching a switching stick head (Part No. 765 005)

– Can be used as earthing stick

Type

Part No.

Nominal voltage (U

N

)

Total length (l

G

)

Insertion depth (I

O

)

+

ISN 36 SK 1000 ISN 36 SK 1500

766 210 766 215

36 kV 36 kV

1000 mm 1500 mm

175 mm 475 mm

Insulating stick, hexagon Shaft, plug-in Coupling

l

G l

O

Bayonet locking mechanism

– Can be used as switching stick by a attaching switching stick head (Part No. 765 009)


– Can be used as operating stick for inserting insulating protective shutters

+

*)

Type

Part No.

Nominal voltage (U

N

)

Max. load on the operating head

Total length (l

G

)

Insertion depth (I

O

)

ISN 36 SQ 1000 ISN 36 SQ 1500

766 211 766 216

36 kV 36 kV

17 *) kg 17 *) kg

1028 mm 1528 mm

150 mm 500 mm

Max. Shutter weight when used for inserting insulating protective shutters

Insulating stick, T Pin Shaft, plug-in Coupling

l

G l

O

766 310

1 g

1

ST

766 322

800 g

1

ST

ISN 36 SQ STK 1000

766 301

IS 123 SQ STK 2000

766 322

Isolierstange 123kV SQ m. Steckkupplung L 2000 mm

With M12 thread, spring locking mechanism and plug-in coupling for extending the handle

– For use as switching stick with a switching stick head (Part No. 765 005)

– For use as earthing stick

+

Type ISN 36 SK STK 1000

Part No. 766 111

Nominal voltage (U

N

) 36 kV

Total length (l

G

) 1000 mm

Insertion depth (I

O

) 175 mm

Bayonet locking mechanism and plug-in coupling for extending the handle




+

Type ISN 36 SQ STK 1000

Part No. 766 310

Nominal voltage (U

N

) 36 kV

Max. load on the operating head 17 *) kg

Total length (l

G

) 1025 mm

Insertion depth (I

O

) 150 mm

*) Max. Shutter weight when used for inserting insulating protective shutters

Modular Insulating stick, hexagon Shaft, plug-in

Coupling

l

G l

O

+

Modular Insulating stick, T Pin Shaft, plug-in Coupling

l

G l

O

+

ISN 123 SK STK 2500

766 222 www.dehn.de

Type ISN 123 SK STK 2500

Part No. 766 222

Nominal voltage (U

N

) 123 kV

Total length (l

G

) 2500 mm

Insertion depth (I

O

) 287 mm

Type ISN 123 SQ STK 2500

Part No. 766 332

Nominal voltage (U

N

) 123 kV

Total length (l

G

) 2500 mm

Insertion depth (I

O

) 287 mm


53

IS STK


IS


IS Insulating Sticks


SCS


SZ

Fuse Tongs

RST

Rescue Rods




• Cost-effective since the installation of different supporting heads allows universal use

• Easy to use

Switching a disconnector by means of an IS SK insulating stick fitted with switching stick head






For Indoor and outdoor switchgear installations

Material Glass-fibre reinforced polyester tube

End fitting Non-slip plastic cap / plug-in coupling for handle extension

IS SK insulating stick fitted with

SSK M12 switching stick head

IS SQ insulating stick fitted with

SSK SQ switching stick head. The black knurled nut is locked into position using the insulating stick.

The handle of

IS STK insulating sticks can be easily extended via the plug-in coupling.

IS SK insulating stick used for clamps with hexagon shaft of earthing and short-circuiting devices

54




RST

Rescue Rods

SZ

Fuse Tongs

Insulating stick, hexagon Shaft

l

G l

O

SCS


IS


IS STK


IS Insulating Sticks

l

G

Insulating stick, T Pin Shaft

l

O

With M12 thread and spring locking mechanism



766 311

1708

419 g

766 315

1708

820 g

IS 36 SK 1000

766 001

Insulating rod 36kV M12 SK L 1000mm

IS 36 SK 1500

766 002

Insulating rod 36kV L 1500mm

766 311

416 g

IS 36 SQ 1500

766 315

810 g

Type IS 36 SK 1000 IS 36 SK 1500

Part No. 766 001 766 002

Nominal voltage (U

N

) 36 kV 36 kV

Total length (l

G

) 1000 mm 1500 mm

Insertion depth (I

O

) 175 mm 475 mm

Insulating stick, hexagon Shaft, plug-in Coupling

l

G l

O

Bayonet locking mechanism




Type IS 36 SQ 1000 IS 36 SQ 1500

Part No. 766 311 766 315

Nominal voltage (U

N

) 36 kV 36 kV

Max. load on the operating head *) 17 kg 17 kg

Total length (l

G

) 1028 mm 1528 mm

Insertion depth (I

O

) 150 mm 500 mm

*) Max. shutter weight when inserting insulating protective shutters

Insulating stick, T Pin Shaft, plug-in Coupling

l

G l

O

IS 36 SK STK 1000

766 100

IS 123 SK STK 2000

766 122

With M12 thread, spring locking mechanism and plug-in coupling for handle extension



Type IS 36 SK STK 1000 IS 123 SK STK 2000

Part No. 766 100 766 122

Nominal voltage (U

N

) 36 kV 123 kV

Total length (l

G

) 1000 mm 2000 mm

Insertion depth (I

O

) 175 mm 200 mm

Bayonet locking mechanism and plug-in coupling for extending the handle




Type IS 36 SQ STK 1000 IS 123 SQ STK 2000

Part No. 766 301 766 322

Nominal voltage (U

N

) 36 kV 123 kV

Max. load on the operating head *) 17 kg 8 kg

Total length (l

G

) 1025 mm 2000 mm

Insertion depth (I

O

) 150 mm 200 mm

*) Max. shutter weight if used for inserting insulating protective shutters

765 009

1708

145 g

SSK SQ

765 009

Switching head w. T pin shaft

765 005

1708

116.7 g

SSK M12

765 005

Switching head M12

Accessory for IS Insulating Sticks

Screw-on Switching Stick Head for IS SK


With M12 thread


Type SSK M12

Part No. 765 005

Material Steel, plastic-sheathed www.dehn.de

Accessory for IS Insulating Sticks

Switching Stick Head for IS SQ Insulating

Sticks

With T pin shaft (bayonet locking mechanism)


T pin shaft in accordance with DIN 48087

Switching stick head is fixed on the insulating stick via the knurled nut

Type SSK SQ

Part No. 765 009

Material Polyamide


55

IS STK


IS


SCS


SZ

Fuse Tongs

RST

Rescue Rods

SCS Switching Sticks with Silicon Rubber Insulator



• Cost-effective

• Easy to use



Switching a disconnector by means of an SCS switching stick



Standard (switching stick) DIN VDE 0681 Part 1 and Part 2



(section 7.1.2)




Design Fully insualted, massive switching stick head

Material (insulating tube) Glass-fibre reinforced polyester tube

Material (switching pin) Steel, sheathed overall in plastic


Nominal Voltages up to 36 kV

l

O l

G

With end cap

Type SCSN 36 1000 SCSN 36 1500 SCSN 36 2000

Part No. 763 510 763 511 763 512

Nominal voltage (U

N

) 36 kV 36 kV 36 kV

Max. shutter weight 17 kg 17 kg 9 kg

Total length (l

G

) 1030 mm 1500 mm 2000 mm

Insertion depth (I

O

) 135 mm 415 mm 765 mm

Nominal Voltages up to 36 kV, plug-in Coupling

l

G l

O

+

Nominal Voltages up to 123 kV, modular

l

O

+ l

G

763 510

0.01 g

1 pc(s)

763 511

0.01 g

1 pc(s)

763 512

SCSN 36 1000

763 510 pc(s)

SCSN 36 1500

763 511

Schaltstange 36kV L 1500mm Auch bei pc(s)

763 512

Schaltstange 36kV L 2000mm auch bei Niederschlägen verwendbar pc(s)

763 515

Schaltstange 72kV L 1500mm auch bei


SCSN 72 2000

763 520

Schaltstange 72kV L 2000mm auch bei


Handle termination with plastic plug-in coupling for extending the handle

Type SCSN 36 STK 1000

Part No. 763 111

Nominal voltage (U

N

) 36 kV

Max. shutter weight 17 kg

Total length (l

G

) 1000 mm

Insertion depth (I

O

) 135 mm


Type SCSN 123 STK 2800

Part No. 763 181

Nominal voltage (U

N

) 123 kV

Total length (l

G

) 2800 mm

Insertion depth (I

O

) 637 mm

763 111

0.01 g

1 pc(s)

763 151

0.01 g

1 pc(s)

SCSN 72 STK 1000

763 111

Schaltstange 36kV L 1000mm mit STK Auch bei


SCSN 72 STK 1500

763 151



763 181

0.01 g

1 pc(s)

SCSN 123 STK 2800

763 181



56


RST

Rescue Rods




• Cost-effective

• User-friendly

SZ

Fuse Tongs

SCS


IS


IS STK


SCS Switching Sticks




Standard (switching stick) DIN VDE 0681 Part 1 and Part 2




For For indoor and outdoor switchgear installations

Design Fully insulated, massive switching stick head


Material (switching pin) Steel, sheathed overall in plastic


Switching a disconnector by means of an SCS switching stick

763 610

1709

962 g

763 611

1709

610 g

763 612

1709

800 g

SCS 36 1000

763 610

1.42 kg

SCS 36 1500

763 611

1709

SCS 36 2000

763 612

Switching rod 36kV L 2000mm

SCS 72 1500

763 615

Switching rod 72kV L 1500mm

SCS 72 2000

763 620

Switching rod 72kV L 2000mm l

G

Nominal Voltages up to 72.5 kV

l

O

With end cap

Type SCS 36 1000 SCS 36 1500 SCS 36 2000 SCS 72 1500 SCS 72 2000

Part No. 763 610 763 611 763 612 763 615 763 620

Nominal voltage (U

N

) 36 kV 36 kV 36 kV 72.5 kV 72.5 kV

Max. shutter weight 17 kg 17 kg 9 kg — —

Total length (l

G

) 1030 mm 1500 mm 2000 mm 1500 mm 2000 mm

Insertion depth (I

O

) 135 mm 415 mm 765 mm 290 mm 690 mm l

G

Nominal Voltages up to 123 kV

l

O


763 100

1709

600 g

763 150

1709

600 g

763 180

1709

850 g

SCS 36 STK 1000

763 100

Switching rod 36kV with plug-in coupling L 1000mm

SCS 72 STK 1500

763 150

Switching rod 72kV with plug-in coupling L 1500mm

SCS 123 STK 2000

763 180

Switching stick 123kV with plug-in coupling L 2000mm

Type

Part No.

Nominal voltage (U

N

)

Max. shutter weight

Total length (l

G

)

Insertion depth (I

O

) www.dehn.de

Other lengths are available on request.

SCS 36 STK 1000 SCS 72 STK 1500 SCS 123 STK 2000

763 100 763 150 763 180

36 kV 72.5 kV 123 kV

17 kg — —

1000 mm 1500 mm 2000 mm

135 mm 290 mm 200 mm


57

IS STK


IS


SZ Fuse Tongs

Nominal voltages up to 36 kV

SCS


SZ

Fuse Tongs

RST

Rescue Rods


• User-friendly



SZ fuse tongs for inserting and removing HH fuses


Standard DIN VDE 0681 Part 3


Design Straight and 20° angled operating head

Clamping range Wide clamping range

∅30 ... 90 mm

Material (insulating stick) Glass-fibre reinforced polyester tube

Material (operating head) Glass-fibre reinforced polyamide

Material (adjustable handle) Polyamide

Material (reducing insert) Polyamide

Colour Grey

A fuse tong is an operating stick used for working on live parts of an installation with voltages exceeding 1 kV a.c. The operating head is used to remove and insert high-voltage high-breaking-capacity fuses (HH fuses). The clamping jaws are opened and closed by simply turning the adjustable handle.

In practice, the 20° angled operating head allows safe and easy actuation of HH fuses that are not easily accessible.

The reducing insert allows low clamping ranges from

∅30 to 50 mm.

Without reducing insert, HH fuses from

∅50 to 90 mm can be actuated.

58




RST

Rescue Rods

SZ

Fuse Tongs

l

G

SCS


IS


IS STK


SZ Fuse Tongs

Straight SZ Fuse Tong

l

O

765 040

1435

2.13 kg

1 pc(s)

765 041

1435

2.28 kg

1

SZ HH 1060

765 040

Sicherungszange gerade Un-36kV D 30..90mm L

1060mm

SZ HH 1250 pc(s)


1250mm

SZ HH 1500

765 042


1500mm

Type SZ HH 1060 SZ HH 1250 SZ HH 1500

Part No. 765 040 765 041 765 042

Clamping range 30 ... 50*

)

/ 50 ... 90 mm 30 ... 50*

)

/ 50 ... 90 mm 30 ... 50*

)

/ 50 ... 90 mm

Total length (l

G

) 1060 mm 1250 mm 1500 mm

Insertion depth (I

O

) 185 mm 185 mm 185 mm

*) Only if used with reducing insert l

G l

O

20° angled SZ Fuse Tong

20°

765 050

1435

2.15 kg

1 pc(s)

765 051

1435

2.29 kg

1 pc(s)

765 052

1435

2.59 kg

1

Sicherungszange abgewinkelt Un-36kVD 30..90mm L 1070mm

SZ HH W20 1250

765 051

Sicherungszange abgewinkelt Un-36kV D 30..90mm L

1250mm

SZ HH W20 1500

765 052

Sicherungszange abgewinkelt Un-36kV D 30..90mm L

1500mm

*)

Type SZ HH W20 1070 SZ HH W20 1250 SZ HH W20 1500

Part No. 765 050 765 051 765 052

Clamping range 30 ... 50* ) / 50 ... 90 mm 30 ... 50* ) / 50 ... 90 mm 30 ... 50* ) / 50 ... 90 mm

Total length (l

G

) 1070 mm 1250 mm 1500 mm

Insertion depth (I

O

) 195 mm 195 mm 195 mm

Only if used with reducing insert

Other lengths are available on request.

706.9 g

1

700 005

Haltevorrichtung f. 3 HH-Sicherungen Einzelteil

Sicherungszange Einzelteil

Accessory for SZ Fuse tongs

Storage Devices for HH Fuses

Wall-mounted

Type HV 3HH ET

Part No. 700 005

For HH fuses

700 015

1.41 kg

1 pc(s)

700 014

1.71 kg

1 pc(s)

HV 3HH

700 015

Haltevorrichtung f. 3 HH-Sicherungen

HV 3HH SZ

700 014

Haltevorrichtung f. 3 HH-Sicherungen u.

Sicherungszange www.dehn.de

Accessory for SZ Fuse tongs

Storage Devices for HH Fuses and Fuse

Tong

Wall-mounted

Type HV 3HH SZ ET

Part No. 700 004

For HH fuses and fuse tong

Storage Device Kit for HH Fuses or HH fuses and Fuse Tong

Wall-mounted

Type HV 3HH HV 3HH SZ

Part No. 700 015 700 014

Consisting of 2x HV 3HH ET 1x HV 3HH ET and

1x HV 3HH ZS ET


59

IS STK


IS


RST Rescue Rods


SCS


SZ

Fuse Tongs

RST

Rescue Rods



• For use in indoor and outdoor installations

• Fixed rescue hook (protected against bridging)

• For rescuing persons weighing up to approximately 100 kg from the live working zone in the event of an electrical accident

Insulated RST rescue rod used to rescue an electrified victim from the live working zone


Standard Based on DIN VDE 0681 Part 1


Material (hook) PVC-HI solid stick


End fitting Non-slip plastic cap


l

O l

G

Type RST 36 1000 RST 36 1500 RST 36 2000

Part No. 766 040 766 041 766 042

Total length (l

G

) 1000 mm 1500 mm 2000 mm

Insertion depth (I

O

) 175 mm 425 mm 775 mm

766 040

1785

820 g

1 pc(s)

766 041

Rettungsstange Un ... 36kV L 1000mm

1785

1 kg

RST 36 1500

766 041

1 pc(s)

766 042

Rettungsstange Un ... 36kV L 2000mm

1 pc(s)

60


Thank you for reading this data sheet.

For pricing or for further information, please contact us at our UK Office, using the details below.

UK Office

Keison Products,

P.O. Box 2124, Chelmsford, Essex, CM1 3UP, England.

Tel: +44 (0)1245 600560

Fax: +44 (0)1245

808399

Email: [email protected]

Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.

Operating Sticks Brochure

Related manuals

dehn

SET DIGIK

dehn

PHE4

dehn

PHE

dehn

PHV 1 P

dehn

PHEG2 X Series

dehn

PHEG1 FD Seriesl

Imperial

ISN2036PS1TWSB-8-SS

dehn

SET DIGIK

Fronius

Symo Advanced 24.0-3 480

dehn

PHV I

dehn

SPN 1000B