Bosch PIM6..R1.. Instruction manual

PIL6..R1.., PIM6..R1..
Hob
[en] Instruction manual
3,05
‘
3,/5
‘
‘
‘
‘
‘
Ú Table of contents
nsomanuitr[e]I nctl
Safety precautions..................................................................... 2
Elements that may damage the appliance ....................................4
Protecting the environment ...................................................... 5
Environmentally-friendly disposal of waste products ...................5
Energy-saving advice .........................................................................5
Induction cooking...................................................................... 5
Advantages of induction cooking ....................................................5
Suitable pans .......................................................................................5
Familiarise yourself with the appliance ................................... 6
The control panel................................................................................6
The hotplates .......................................................................................6
Residual heat indicator ......................................................................6
Programming the hob................................................................ 7
Switching the hotplate on and off....................................................7
Set the hotplate ...................................................................................7
Cooking guidelines table...................................................................7
Childproof lock........................................................................... 8
Turning on and off the childproof lock. ..........................................8
Activating and deactivating the childproof lock ............................8
Powerboost function ..................................................................9
Use limitations ..................................................................................... 9
To activate............................................................................................ 9
To deactivate ....................................................................................... 9
Time program function...............................................................9
How to program .................................................................................. 9
Basic settings .............................................................................9
To access the basic settings......................................................... 10
Care and cleaning.....................................................................11
Hob ..................................................................................................... 11
Hob frame ......................................................................................... 11
Fixing malfunctions..................................................................11
Normal noise while the appliance is working ............................ 12
After-sales service....................................................................12
Produktinfo
Additional information on products, accessories, replacement
parts and services can be found at www.bosch-home.com and
in the online shop www.bosch-eshop.com
ã=Safety precautions
Please read this manual carefully.
Please keep the instruction and
installation manual as well as the
appliance certificate in a safe place
for later use or for subsequent
owners.
Check the appliance after removing
it from the packaging. If it has
suffered any damage in transport,
do not connect the appliance,
contact the Technical Assistance
Service and provide written
notification of the damage caused,
2
otherwise you will lose your right to
any type of compensation.
This appliance must be installed
according to the installation
instructions included.
This appliance is intended for
domestic use only. The appliance
must only be used for the
preparation of food and drink. The
appliance must be supervised
during operation. Only use this
appliance indoors.
This appliance is not intended for
operation with an external clock
timer or a remote control.
This appliance may be used by
children over the age of 8 years old
and by persons with reduced
physical, sensory or mental
capacity or by persons with a lack
of experience or knowledge if they
are supervised or are instructed by
a person responsible for their
safety how to use the appliance
safely and have understood the
associated hazards.
Children must not play with the
appliance. Children must not clean
the appliance or carry out general
maintenance unless they are at
least 8 years old and are being
supervised.
Keep children below the age of
8 years old at a safe distance from
the appliance and power cable.
Risk of fire!
■ Hot oil and fat can ignite very
quickly. Never leave hot fat or oil
unattended. Never use water to
put out burning oil or fat. Switch
off the hotplate. Extinguish flames
carefully using a lid, fire blanket or
something similar.
The hotplates become very hot.
Never place combustible items on
the hob. Never place objects on
the hob.
Risk of fire!
■
The appliance gets hot. Do not
keep combustible objects or
aerosol cans in drawers directly
underneath the hob.
Risk of fire!
■
Risk of fire!
■
The hob switches off automatically
and can no longer be operated. It
may switch on unintentionally at a
later point. Switch off the circuit
breaker in the fuse box. Contact
the after-sales service.
Risk of burning!
■ The hotplates and the area around
them get very hot. Never touch the
hot surfaces. Keep children away.
The hotplate heats up but the
display does not work. Switch off
the circuit breaker in the fuse box.
Contact the after-sales service.
Risk of burns !
■
Metal objects on the hob quickly
become very hot. Never place
metal objects (such as knives,
forks, spoons and lids) on the
hob.
Risk of burns !
■
After each use, always turn off the
hob at the main switch. Do not
wait until the hob turns off
automatically after the pan is
removed.
Risk of fire!!
■
Risk of electric shock!
■ Incorrect repairs are dangerous.
Repairs may only be carried out
and damaged power cables
replaced by one of our trained
after-sales technicians. If the
appliance is defective, unplug the
appliance from the mains or
switch off the circuit breaker in the
fuse box. Contact the after-sales
service.
Penetrating moisture may cause
an electric shock. Do not use any
high-pressure cleaners or steam
cleaners.
Risk of electric shock.!
■
Risk of electric shock!
3
■
A defective appliance may cause
electric shock. Never switch on a
defective appliance. Unplug the
appliance from the mains or
switch off the circuit breaker in the
fuse box. Contact the after-sales
service.
Cracks or fractures in the glass
ceramic may cause electric
shocks. Switch off the circuit
breaker in the fuse box. Contact
the after-sales service.
Ris k of electric s hock!
■
Electromagnetic hazards!
This appliance complies with safety
and electromagnetic compatibility
standards. However, people with
pacemakers or insulin pumps must
refrain from using this appliance. It
is impossible to ensure that all of
these devices available on the
market comply with current
electromagnetic compatibility
standards, and that interference
which may prevent the device from
working correctly will not occur. It is
also possible that people with other
types of devices, such as a hearing
aids, could experience some
discomfort.
Malfunction risk!
The hob is equipped with a fan in
the lower section. If there is a
drawer under the hob it should not
be used to store small objects or
paper, since they could damage
the fan or interfere with the cooling
if they are sucked into it.
There should be a minimum of
2 cm between the contents of the
drawer and fan intake.
Risk of injury!
■ When cooking in a bain marie, the
hob and cooking container could
shatter due to overheating. The
cooking container in the bain
marie must not directly touch the
bottom of the water-filled pot. Only
use heat-resistant cookware.
Saucepans may suddenly jump
due to liquid between the pan
base and the hotplate. Always
keep the hotplate and saucepan
bases dry.
Risk o f injury!
■
Elements that may damage the appliance
Caution!
■
■
■
■
Rough pan bases may scratch the hob.
■
Avoid leaving empty pots and pans on the hotplate. Doing so
may cause damage.
Do not place hot pans on the control panel, the indicator
area, or the hob frame. Doing so may cause damage.
Hard or pointed objects dropped on the hob may damage it.
Aluminium foil and plastic containers will melt if placed on the
hotplate while it is hot. The use of laminated sheeting is not
recommended on the hob.
Overview
The following table presents the most common damage
caused:
Damage
Cause
Measure
Stains
Food spillage
Immediately remove spilt food using a glass scraper.
Unsuitable cleaning products
Only use cleaning products specifically designed for glass-ceramic hobs.
Salt, sugar and sand
Do not use the hob as a tray or working surface.
Scratches
Pans with rough bottoms may scratch Check pans.
the glass ceramic
Fading
Chips
4
Unsuitable cleaning products
Only use cleaning products specifically produced for glass-ceramic hobs.
Contact with pans
Lift pots and pans before moving them around.
Sugar, substances with a high sugar Immediately remove spilt food using a glass scraper.
content
Protecting the environment
Unpack the appliance and dispose of its packaging in such a
way that no damage is caused to the environment.
Energy-saving advice
■
Environmentally-friendly disposal of waste
products
This appliance conforms to the Waste Electrical and
Electronic Equipment Directive WEEE 2002/96/EC.
This directive defines the framework for recycling used
appliances within European territory
■
■
■
■
■
Always place the correct lid on cookware. Cooking with an
uncovered pan will result in a four-fold increase in energy
use. Use a glass lid to provide visibility and avoid having to
lift the lid.
Use cookware equipped with a solid, flat bottom. Curved pan
bases increase energy consumption.
The diameter of the pan base must match the size of the
hotplate. If not, energy may be wasted. Note: The
manufacturer normally indicates the pan's upper diameter.
This is normally greater than the diameter of the pan's base.
Choose cookware of a size suited to the amount of food you
are going to cook. A large pan that is only half full will use a
lot of energy.
Use a small amount of water when cooking. This saves
energy, and vegetables retain their vitamins and minerals.
Select a lower power level.
Induction cooking
Advantages of induction cooking
Other suitable cookware for induction
Induction cooking represents a radical change from the
traditional method of heating; the heat is generated directly in
the pan. It therefore offers a number of advantages:
There are other types of cookware especially made for
induction whose base is not entirely ferromagnetic.
■
■
■
■
When using large cookware on a
smaller ferromagnetic zone, only
the ferromagnetic zone heats up,
so heat might not be uniformly
distributed.
Time savings for cooking and frying; since the pan is heated
directly.
Energy is saved.
Care and cleaning are simpler. Foods that have spilt do not
burn as quickly.
Cookware with aluminium on the
base reduce the ferromagnetic
zone, so less heat may be supplied or be difficult to detect.
Heat and safety control; the hob supplies or cuts off power
immediately when the control knob is turned on. The
induction hotplate stops supplying heat if the pan is removed
without having previously switched it off.
For good cooking results, the
diameter of the cookware's ferromagnetic area should match the
size of the hotplate. If cookware
is not detected on a hotplate, try
it on the next smaller hotplate
down.
Suitable pans
Ferromagnetic pans
Only ferromagnetic pans are suitable for induction cooking,
these may be made from:
■
enamelled steel
Unsuitable pans
■
cast iron
Never use pans made from:
■
special cutlery for stainless steel induction pan
■
common thin steel
■
glass
■
earthenware
■
copper
■
aluminium
To determine whether a pan is suitable, check to see if a
magnet will stick to it.
Characteristics of the pan base
The characteristics of the pan base may affect the uniformity of
the cooking results. Pans made from materials which help
diffuse heat, such as stainless steel sandwich pans, distribute
heat uniformly, saving time and energy.
Absence of pan or unsuitable size
If no pan is placed on the selected hotplate, or if it is made of
unsuitable material or is not the correct size, the power level
displayed on the hotplate indicator will flash. Place a suitable
pan on the hotplate to stop the flashing. If this takes more than
90 seconds, the hotplate will switch off automatically.
5
Empty pans or those with a thin base
Pan detection
Do not heat empty pans, nor use pans with a thin base. The
hob is equipped with an internal safety system. However, an
empty pan may heat up so quickly that the "automatic switch
off" function may not have time to react and the pan may reach
very high temperatures. The base of the pan could melt and
damage the glass on the hob. In this case, do not touch the
pan and switch the hotplate off. If it fails to work after it has
cooled down, please contact the Technical Assistance Service.
Each hotplate has a minimum limit for detecting pans, which
varies depending on the material of the pan being used. You
should therefore use the hotplate that is most suitable for the
diameter of your pan.
Familiarise yourself with the appliance
These instructions for use are applicable to other hobs. On
page 2 an overview of the models is provided, along with
information on measurements.
The control panel
&RQWUROSDQHO
IRU
“VHOHFWLQJWKH
KRWSODWH
,QGLFDWRUVIRU
UWLPHSURJUDP
IXQFWLRQ
&RQWUROSDQHOIRU
UWLPHSURJUDP
IXQFWLRQ
,QGLFDWRUVIRU
SRZHUOHYHO³É
IXQFWLRQDOLW\¯
UHVLGXDOKHDW‡
SRZHUERRVWIXQFWLRQ°
&RQWURO
SDQHO
IRU
PDLQ
VZLWFK
&RQWUROSDQHOV
IRU
VHOHFWLQJSRZHU
OHYHO
Control surfaces
Pressing a symbol activates its corresponding function.
Notes
The settings will not change if several symbols are pressed at
the same time. This enables the programming zone to be
cleaned when food is spilt.
■
■
Always keep the control surfaces dry. Moisture can affect
proper functioning.
The hotplates
Hotplate
Turning on and off
$ Single hotplate
Always use cookware of a suitable size.
Use only cookware suitable for induction cooking; see the section on suitable cookware.
Residual heat indicator
The hob has a residual heat indicator • on each hotplate,
which lights up when they are hot. Avoid touching them when
this indicator is lit.
The • light will remain on while the hotplate is hot, even after
the hob has been turned off.
If the pan is removed before the hotplate is switched off, the •
will appear and alternate with the selected power level.
6
&RQWUROSDQHO
IRU
'FKLOGSURRI
ORFN
Programming the hob
This section will show you how to program the hotplates. The
table contains power levels and cooking times for several
dishes.
Switching the hotplate on and off
The range is turned on and off using the main switch.
To switch on: press the % symbol. The indicator next to the
main switch and the ‹ indicators light up. The range is ready
for use.
To switch off: press the % symbol until the indicators go out. All
hotplates are turned off. The residual heat indicator will remain
lit until the hotplates have cooled down sufficiently.
Setting the power level
The range should be switched on.
1. Press the μ symbol several times until the ‹ indicator of the
required hotplate lights up.
2. Within the next 5 seconds, press the + or - symbol.The basic
setting appears:
+ symbol, power level 1.
- symbol, power level 9.
Note: The range switches off automatically when all the
hotplates have been turned off for more than 20 seconds.
Set the hotplate
Select the required power level with the + and - symbols.
Power level 1 = minimum power.
Power level 9 = maximum power.
Each power level has an intermediate setting. This is marked
with a dot.
3. To change the power level: select the hotplate and press the
+ or - symbol until the required power level appears.
To switch off the hotplate
Select the hotplate and then press the + or - symbol until ‹
symbol appears.
The hotplate turns off and the residual heat indicator appears.
Note: If no pan has been placed on the induction hotplate, the
selected power level flashes. After a certain time, the hotplate
switches off.
Cooking guidelines table
The table below contains some examples.
Cooking times depend on the power level, type, weight and
quality of the food. As such they are approximate.
When heating purées, creams and thick sauces, stir
occasionally.
Use power level 9 to begin cooking.
Power levels affect cooking results.
Power level
Cooking time
(minutes)
Chocolate, chocolate coating, butter, honey
1-1.
-
Gelatine
1-1.
-
Stew (e.g., lentils)
1-2
-
Milk**
1.-2.
-
Sausages heated in water**
3-4
-
Frozen spinach
2.-3.
5-15 min
Frozen goulash
2.-3.
20-30 min
Potato dumplings
4.-5.*
20-30 min
Fish
4-5*
10-15 min
Melt
Heating and keeping warm
Defrosting and heating
Slow cooking, simmering
White sauces (e.g., bechamel)
1-2
3-6 min
Whipped sauces (e.g., Bearnaise, Hollandaise)
3-4
8-12 min
* Uncovered cooking
** Uncovered
7
Power level
Cooking time
(minutes)
Rice (with a double amount of water)
2-3
15-30 min
Rice pudding
2-3
25-35 min
Boiling, steaming, sautéing
Unpeeled potatoes
4-5
25-30 min
Peeled potatoes with salt
4-5
15-25 min
Pasta
6-7*
6-10 min
Soups
3.-4.
15-60 min
Vegetables
2.-3.
10-20 min
Greens, frozen foods
3.-4.
7-20 min
Cooked in a pressure cooker
4.-5.
-
Meat roll
4-5
50-60 min
Stew
4-5
60-100 min
Goulash
3.-4.
50-60 min
Steaks, plain or breaded
6-7
6-10 min
Frozen steaks
6-7
8-12 min
Chops, plain or breaded
6-7
8-12 min
Beefsteak (3 cm thick)
7-8
8-12 min
Stewing
Bake / Fry with a little oil**
Chicken breast (2 cm thick)
5-6
10-20 min
Frozen chicken breast
5-6
10-30 min
Plain fish and fish fillet
5-6
8-20 min
Breaded fish and fish fillet
6-7
8-20 min
Frozen breaded fish (e.g., fish fingers)
6-7
8-12 min
Prawns and shrimps
7-8
4-10 min
Frozen meals (e.g., stir-fries)
6-7
6-10 min
Pancakes
6-7
fry individually
Omelette
3.-4.
fry individually
Fried eggs
5-6
3-6 min
Frozen foods (e.g., French fries, chicken nuggets)
8-9
Frozen croquettes
7-8
fry one portion at a
time
Meatballs
7-8
Meat (e.g., chicken pieces)
6-7
Frying** (150-200 g per serving with 1-2 l. of oil)
Fish, in breadcrumbs or batter
6-7
Greens, mushrooms, in breadcrumbs or batter (e.g., baby mushrooms)
6-7
Confectionary products (e.g., fritters, fruit in batter)
4-5
* Uncovered cooking
** Uncovered
Childproof lock
The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Turning on and off the childproof lock.
The range should be turned off.
To turn on: press the D symbol for approx. 4 seconds. The
indicator next to the D symbol lights up for 10 seconds. The
range is locked.
To turn off: press the D symbol for approx. 4 seconds. The
range is unlocked.
8
Note: The childproof lock can be accidentally activated by the
presence of water spilled while cleaning, food that has spilled
over or objects resting on the D symbol.
Activating and deactivating the childproof
lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
See the “Basic Settings" section.
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level Š.
To activate
Use limitations
2. Press the + symbol. On the hotplate, the › indicator will
This function is available on all hotplates, provided that no other
hotplate in the same group is operating, (see picture). If this is
not the case, the › and Š symbols will flash on the selected
hotplate display; then it will automatically set the power level Š.
In hotplate number 1, the Powerboost function can be activated
at any time.
1. Select the power level Š.
appear.
The function has been activated.
To deactivate
1. Select a hotplate.
2. Press the - symbol. The › symbol will disappear and the
hotplate will return to the Š power level.
The Powerboost function has been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Time program function
This function allows the selected hotplate to be switched off
automatically after a preset time by inserting the cooking time.
How to program
The hob should be switched on.
1. Select the required hotplate and power level.
Then press the r symbol until the ‹‹ indicator is displayed.
The indicator lights up on the selected hotplate.
2. Set the time using the + or - symbols.
+ = 30 minutes
- = 10 minutes
Once the time has elapsed
The hotplate turns off, there is a warning sound and the ‹
indicator lights up. Press the r symbol. The indicators go out
and the sound stops.
To cancel or change the time
Select the hotplate with the μ symbol. Press the r symbol
and change the cooking time with the + or - , symbols or
set to ‹‹.
Note: Any cooking time can be programmed up to 99 minutes.
After a few seconds, the timer will start to count down.
Basic settings
The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator
Function
™‚
Childproof lock
‹ Deactivated.*
‚ Activated.
*Factory settings
9
Indicator
Function
™ƒ
Sound signals
‹ Confirmation beep and error signal deactivated.
‚ Only confirmation beep deactivated.
ƒ All signals activated.*
™†
Automatic time limitation.
‹ Basic setting: switch off after 1-10 hours.*
‚ The basic setting is halved: switch off after 0.5 - 5 hours.
ƒ The basic setting is quartered: switch off after 0.25 - 2.5 hours.
™‡
Duration of the time program function warning signal
‚ 10 seconds.*
ƒ 30 seconds.
„ 1 minute.
™ˆ
Power-Management function
‹ = Deactivated.*
‚ = 1,000 W. minimum power.
‚ = 1,500 W.
ƒ = 2,000 W.
etc.
Š or Š. = maximum power of the hob.
™‹
Return to basic settings
‹ Personal settings.*
‚ Return to factory settings.
*Factory settings
To access the basic settings
The range should be turned off.
4. Then select the required setting using the + and - symbols.
The setting appears on the upper right of the display.
1. Turn on the range with the main switch.
2. Within the next 10 seconds, press the D symbol and hold
for 4 seconds.
5. Press the D symbol again and hold it for 4 seconds. The
settings have been properly saved.
Quit
™‚ appears in the lower display.
3. Press the D several times until the required setting indicator
appears.
10
To leave the basic settings, turn off the hob at the main switch.
Care and cleaning
The advice and warnings contained in this section aim to guide
you in cleaning and maintaining the hob, so that it is kept in the
best possible condition
Hob
Glass scraper
Remove dried-on food remains using a glass scraper.
1. Release the scraper safety catch
2. Use the blade to clean the hob surface
Cleaning
Clean the hob after each use. This prevents food remains left
on the surface from burning. Wait until the hob is cold enough
before attempting to clean it.
Only use cleaning products specifically designed for glassceramic hobs. Follow the instructions provided on the
packaging.
Do not use:
Do not attempt to clean the hob surface with the base of the
scraper. This could result in scratching.
ã=Risk of injury!!
The blade is extremely sharp. Risk of cuts. Protect the blade
when not in use. Replace the blade immediately when any
imperfections are found.
Care of the appliance
Apply an additive to protect and preserve the hob. Follow the
advice and warnings provided with the product.
■
Abrasive products
■
heavy-duty cleaners, like oven sprays and stain removers
■
Pads that may scratch
Hob frame
■
High-pressure or steam cleaners
In order to avoid damage to the hob frame, follow the
indications below:
■
Use only slightly soapy hot water
■
Do not use sharp or abrasive products
■
Do not use a glass scraper
Fixing malfunctions
Malfunctions are commonly due to small details. Before calling
the Technical Assistance Service, you should consider the
following advice and warnings.
Indicator
Malfunction
Solution
none
The electric power supply has been interrupted.
Use other electrical appliances to check whether there has been a
power cut.
The appliance has not been correctly con- Check that the appliance has been connected correctly according to
the connection diagram.
nected according to the connection diagram.
“ flashes
Electronic system malfunction.
If the above checks do not resolve the malfunction, contact the Technical Assistance Service.
The control panel is damp or an object is
resting on it.
Dry the control panel area or remove the object.
Ҥ + number / Electronic system malfunction.
š + number /
¡ + number /
There is an internal error in the operation.
”‹/”Š
Turn the hob off from the mains. Wait 30 seconds or so and switch it
back on.*
Turn the hob off from the mains. Wait 30 seconds or so and switch it
back on.*
”ƒ
The electronic system has overheated and Wait for the electronic system to cool down. Then push any symbol
on the hob.*
the corresponding hotplate has been
switched off.
”…
The electronic system has overheated and
all the hotplates have been switched off.
”‰
The hotplate has been working non-stop
too long at a high power level.
The automatic time stop has been activated. Press any symbol on the
control panel. The indicator goes out. The hob may now be switched
back on.
—‚
Incorrect supply voltage, outside normal
operating limits.
Please contact the local electricity board.
—ƒ/—„
The hotplate has overheated and has
Wait until the electronic system has cooled down sufficiently before
switched off in order to protect its cooking switching the hotplate back on.
surface.
* If the indication persists, call the Technical Assistance Service.
Do not rest hot pans on the control panel.
11
Normal noise while the appliance is working
A crackling sound
Induction heating technology is based on the creation of
electromagnetic fields that generate heat directly at the base of
the pan. Depending on how the pan has been manufactured,
these may produce certain noises or vibrations such as those
described below:
This noise occurs in pans which are made from different
materials superimposed on one another. It is caused by the
vibrations that occur ajoining surfaces of the different
superimposed materials. The noise comes from the pan. The
amount of food and cooking method can vary.
A deep humming sound as in a transformer
A high-pitched whistling sound
This noise is produced when cooking on a high power level. It
is caused by the amount of energy transferred from the hob to
the pan. The noise disappears or becomes faint when the
power level is lowered.
A low whistling sound
This noise is produced when the pan is empty. It disappears
when water or food is added to the pan.
This noise is produced mainly in pans made from different
materials superimposed on one another, and it occurs when
such pans are heated at maximum power on two hotplates at
the same time. The whistling disappears or becomes fainter as
soon as the power level is lowered.
Noise from the fan
For proper use of the electronic system, the temperature of the
hob must be controlled. For this purpose, the hob has a fan
that starts working after detecting excess temperatures at
different power levels. The fan may also work due to inertia
after the hob has been switched off, if the temperature detected
is still too high.
The noises described are normal, they are part of induction
heating technology and not a sign of malfunction.
After-sales service
Our after-sales service is there for you if your appliance should
need to be repaired. We are committed fo find the best solution
also in order to avoid an unnecessary call-out.
E number and FD number:
Please quote the E number (product number) and the FD
number (production number) of your appliance when
contacting the after-sales service. The rating plate bearing
these numbers can be found on the appliance certificate.
Please note that a visit from an after-sales service engineer is
not free of charge, even during the warranty period.
Please find the contact data of all countries in the enclosed
customer service list.
12
To book an engineer visit and product advice
GB
0844 8928979
Calls from a BT landline will be charged at up to 3
pence per minute. A call set-up fee of up to 6 pence may
apply.
IE
01450 2655
Trust the expertise of the manufacturer, and rest assured that
the repair will be carried out by trained service technicians
using original spare parts for your domestic appliance.
Robert Bosch Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München
Germany
www.bosch-home.com
*9000700369*
9000700369
00
911219