Samsung HT-DS110 Instruction manual

9/16/04 9:29 AM
Page 3
DIGITAL HOME
CINEMA SYSTEM
HT-DS110
Instruction Manual
OPEN/CLOSE
DVD
DIMMER
REMAIN
TUNER
BAND
AUX
EZ VIEW
NTSC/PAL
SLOW
MO/ST
SUB TITLE
STEP
DSP/EQ
REPEAT
VOLUME
TUNING
U
MEN
INFO
PL II
EFFECT
PL II
MODE
E
UT
M
RE
TU
RN
1p~32p(DS110)-GB
ENTER
RDS DISPLAY
PTY–
PTY SEARCH
TA
TEST TONE
PTY+
SOUND EDIT
TUNER
MEMORY
COMPACT
VIDEO
DIGITAL AUDIO
COMPACT
DIGITAL VIDEO
SLEEP
CANCEL
LOGO
SLIDE MODE DIGEST
ZOOM
1p~32p(DS110)-GB
9/16/04 9:29 AM
Page 4
Safety Warnings
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE REAR COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified
as a CLASS 1 LASER product.
Use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
This symbol indicates that dangerous voltage which
can cause electric shock is present inside this unit.
This symbol alerts you to important operating and
maintenance instructions accompanying the unit.
WARNING: To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
Wiring the Main Power Supply Plug(UK Only)
IMPORTANT NOTICE
The main lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin
face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used.
Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of the same
colour as the fuse fitted in the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you
should obtain a suitable safety approved extension lead or consult your dealer for assistance.
However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the
plug to a main socket as there is a risk of shock hazard from the bared flexible cord.
Never attempt to insert bare wires directly into a main socket. A plug and fuse must be used at all times.
IMPORTANT
The wires in the main lead are coloured in accordance with the following code:–
BLUE = NEUTRAL
BROWN = LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows:–
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH
THE LETTER E OR BY THE EARTH SYMBOL
, OR COLOURED GREEN OR GREEN
AND YELLOW.
1
1p~32p(DS110)-GB
9/16/04 9:29 AM
Page 5
Precautions
PREPARATION
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation
slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may
become hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD
player to the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply, remove the main plug from the wall outlet, especially when left unused for a long period of time.
During thunderstorms, disconnect AC main plug from the
wall outlet.
Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat
sources.
This could lead to overheating and malfunction of the unit.
Phones
Protect the player from moisture(i.e. vases) , and excess heat(e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers...). Disconnect the power cable from the AC supply if the player malfunctions. Your player is not intended for industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc have been stored in cold
temperatures.
If transporting the player during the winter, wait approximately 2 hours
until the unit has reached room temperature before using.
The battery used with this product contain chemicals that
are harmful to the environment.
Do not dispose of batteries in the general household
trash.
2
1p~32p(DS110)-GB
9/16/04 9:29 AM
Page 6
Features
Multi-Disc Playback & AM/FM Tuner
The HT-DS110 combines the convenience of multi-disc playback capability,
including DVD, VCD, CD, MP3-CD, CD-R/RW, and DVD-R/RW, with a
sophisticated AM/FM tuner, all in a single player.
Dolby Pro Logic II
Dolby Pro Logic II is a new form of multi-channel audio signal decoding technology
that improves upon existing Dolby Pro Logic.
DTS (Digital Theater Systems)
DTS is an audio compression format developed by Digital Theater
Systems Inc. It delivers full-frequency 5.1 channel sound.
TV Screen Saver Function
The HT-DS110 automatically brightens and darkens the brightness of
the TV screen after 3 minutes in the stop mode.
The HT-DS110 automatically switches itself into the power saving mode
after 20 minutes in the screen saver mode.
Power Saving Function
The HT-DS110 automatically shuts itself off after 20 minutes in the stop mode.
Customized TV Screen Display
The HT-DS110 allows you to select your favorite image during JPEG,
DVD or VCD playback and set it as your background wallpaper.
P.SCAN (progressive Scan) Function
Unlike regular interlace Scan ,in which two fields of picture information alternate to create the
entire picture (odd scan lines, then even scan lines),Progressive Scan uses one field of
information (all lines displayed in one pass ) to create a clear and detailed picture without visible
scan lines.
3
1p~32p(DS110)-GB
9/16/04 9:29 AM
Page 7
Contents
PREPARATION
PREPARATION
Safety Warnings..................................................................................................................................................................1
Precautions .........................................................................................................................................................................2
Features..............................................................................................................................................................................3
Notes on Discs....................................................................................................................................................................5
Description ..........................................................................................................................................................................7
CONNECTIONS
Connecting to the Speakers ...............................................................................................................................................11
Connecting the FM and AM Antennas................................................................................................................................13
Connecting the Video to TV................................................................................................................................................14
Connecting to External Components..................................................................................................................................15
P.SCAN(Progressive Scan) Function .................................................................................................................................16
OPERATION
Disc Playback .....................................................................................................................................................................17
MP3-CD Playback ..............................................................................................................................................................18
JPEG File Playback ............................................................................................................................................................19
Displaying Disc Information ................................................................................................................................................21
Checking the Remaining Time............................................................................................................................................22
Fast/Slow Playback ............................................................................................................................................................23
Skipping Scenes/Songs......................................................................................................................................................24
Repeat Playback.................................................................................................................................................................25
A-B Repeat Playback..........................................................................................................................................................26
Angle Function....................................................................................................................................................................27
Zoom Function....................................................................................................................................................................28
Selecting Audio/Subtitle Language .....................................................................................................................................29
Moving Directly to a Scene/Song .......................................................................................................................................30
Using Disc Menu.................................................................................................................................................................31
Using the Title Menu...........................................................................................................................................................32
SETUP
Setting the Language..........................................................................................................................................................33
Setting TV Screen type.......................................................................................................................................................35
Setting Parental Controls (Rating Level) ............................................................................................................................37
Setting the Password..........................................................................................................................................................39
Av Sync Setup ....................................................................................................................................................................40
Setting the Wallpaper .........................................................................................................................................................41
Setting the Speaker Mode ..................................................................................................................................................43
Setting the Test Tone ..........................................................................................................................................................44
Setting the Delay Time .......................................................................................................................................................45
Setting the Audio Quality ....................................................................................................................................................47
Setting the DRC (Dynamic Range Compression) ..............................................................................................................49
Sound Field (DSP)/EQ Function.........................................................................................................................................50
Dolby Pro Logic II Mode .....................................................................................................................................................51
Dolby Pro Logic II Effect .....................................................................................................................................................52
RADIO OPERATION
Listening to Radio ...............................................................................................................................................................53
Presetting Stations..............................................................................................................................................................54
About RDS broadcasting ....................................................................................................................................................55
MISCELLANEOUS
Convenient Functions .........................................................................................................................................................57
Before Calling for Service...................................................................................................................................................59
Cautions on Handling and Storing Discs............................................................................................................................61
Specifications......................................................................................................................................................................62
Notes on Terminology .........................................................................................................................................................63
Memo ..................................................................................................................................................................................64
4
1p~32p(DS110)-GB
9/16/04 9:29 AM
Page 8
Notes on Discs
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
VIDEO
1
~ 6
surround sound and MPEG-2 video compression technology. Now you can enjoy these
realistic effects in the home, as if you were in a movie theater or concert hall.
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Playable Discs
Disc Type
Mark (Logo)
Recorded Signals
Disc Size
12cm
Audio + Video
DVD
8cm
VIDEO
COMPACT
Audio + Video
VIDEO-CD
12cm
74 min.
8cm
20 min.
12cm
74 min.
8cm
20 min.
DIGITAL VIDEO
COMPACT
Audio
AUDIO-CD
Max. Playing Time
Approx. 240 min. (single-sided)
Approx. 480 min. (double-sided)
Approx. 80 min. (single-sided)
Approx. 160 min. (double-sided)
DIGITAL AUDIO
Do not use the following types of disc!
• LD, CD-G, CD-I, CD-ROM and DVD-ROM cannot be played on this player.
If such discs are played, a "WRONG DISC FORMAT" message appears on the TV screen.
• DVD discs purchased abroad may not play on this player.
If such discs are played, a "WRONG DISC FORMAT" message appears on the TV screen.
Copy Protection
• Many DVD discs are encoded with copy protection. Because of this, you should only connect
•
5
your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
1p~32p(DS110)-GB
9/16/04 9:29 AM
Page 9
PREPARATION
Disc Recording Format
CD-R Discs
• Depending on the disc recording device (CD-Recorder or PC ) and the condition of the disc, some CD-R discs
may not be playable.
• Use a 650MB/74 minute CD-R. Avoid CD-R media, as they may not be playable.
• If possible, do not use CD-RW (Rewritable) media, as they may not be playable.
• Only the CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open,
you may not be able to fully play the disc.
CD-R MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Use discs recorded with a compression/decompression data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions can be played.
• Only a consecutively written Multisession disc can be played. If there is a blank segment in the Multisession disc,
the disc can be played only up to the blank segment.
• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g.,
32Kbps ~ 320Kbps), the sound may skip during playback.
• If more than 500 tracks are recorded on a single CD, a maximum of 500 tracks can be played.
• If more than 300 folders are recorded on a single CD, a maximum of 300 folders can be played.
What is MP3?
MP3 is short for MPEG-1 Audio Layer 3 and MPEG is an acronym for Moving Pictures Experts
Group. MP3 is a file format with compression ratio of 1:12 (128 Kbps*) That is, you can use MP3
format to record about 12 times the usual amount of data on a regular CD.
CD-R JPEG Discs
• Only files with the ".jpeg" and ".JPEG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc, the
disc can be played only up to the blank segment.
• A maximum of 9,999 images can be stored on a single CD.
• When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
• Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
6
1p~32p(DS110)-GB
9/16/04 9:29 AM
Page 10
Description
—Front Panel—
Play/Pause (
Power (
) button
Stop (
) button
) button
Function button
Open/Close button
Volume control
Standby indicator
Tuning Up & Skip (
) buttons
Tuning Down & Skip (
) buttons
Disc Tray
DOLBY DIGITAL indicator
LINEAR PCM indicator
DSP indicator
PROGRESSIVE
SCAN indicator
STEREO indicator
CHAPTER indicator
PROGRAM indicator
TITLE indicator
TUNER indicator
FM RDS Status
PBC indicator
P.SCAN
L
C
LINEAR PCM
DSP
TITLE PBC CHAP
PRGM
RDS
RT
TA
S
kHz
MHz
MPEG
RS
DTS Disc indicator
MPEG indicator
PRO LOGIC indicator
SPEAKER indicator
7
TUNED
R
SW
LS
ST
System Status Display
RADIO FREQUENCY
indicator
1p~32p(DS110)-GB
9/16/04 9:29 AM
Page 11
PREPARATION
—Rear Panel—
Video Output Connector
Connect the TV's video input jacks
(VIDEO IN) to the VIDEO OUT connector.
COMPONENT VIDEO OUTPUT jacks
Connect a TV with component video
input jacks to these jacks.
External Digital in Optical Input Connector
Use this to connect external equipment capable of digital output.
IMPEDANCE SUBWOOFER : 3Ω
FRONT / CENTER / REAR : 6Ω
CENTER
SUBWOOFER
REAR
L
FRONT
L
REAR
R
FRONT
R
5.1 Channel Speaker
Output Terminals
External Audio
Component Input
Connector
FM Antenna
Connector
AM Antenna
Connector
Accessories
E
LOS
N/C
OPE
EZ
R
ME
DIM
DVD
SUB
/EQ
DSP
X
AU
W
SLO /ST
MO
AIN
REM
ER
TUN D
BAN
W
VIE L
C/PA
NTS
P
STE
E
TITL
EAT
REP
E
LUM
VO
II
PL
DE
MO
ING
TUN
RETURN
MENU
II
PL
ECT
EFF
INFO
LAY
DISP
MUTE
RDS
ER
ENT
–
PTY
PTY
TA
P
SLEE
RCH
SEA
TEST
M
ZOO
EST
DIG
ER
ORY
TUN
MEM
EDIT
CEL
CAN
DE
E MO
SLID
ND
SOU
E
TON
O
LOG
+
PTY
VIDEO
Remote Control
AM Antenna
Audio Cable
Video Cable
FM Antenna
User's Manual
Scart Jack
8
1p~32p(DS110)-GB
9/16/04 9:29 AM
Page 12
Description
—Remote Control—
TV, DVD POWER button
DIMMER button
OPEN/CLOSE button
EZ VIEW, NTSC/PAL button
REMAIN button
OPEN/CLOSE
DIMMER
REMAIN
DVD
TUNER
BAND
AUX
EZ VIEW
NTSC/PAL
SLOW
MO/ST
SUB TITLE
STEP
DSP/EQ
REPEAT
DVD button
STEP button
DSP/EQ button
AUX button
TUNER BAND button
SUB TITLE button
SLOW, MO/ST button
REPEAT button
Play/Pause button
TUNING
VOLUME
PL II MODE button
PL II
MODE
PL II
EFFECT
INFO
U
MEN
INFO button
E
UT
M
RE
TU
RN
MENU button
ENTER
RDS Selection button
SLIDE MODE button
9
SLEEP
CANCEL
LOGO
SLIDE MODE DIGEST
MUTE button
Direction/Enter button
TEST TONE
TEST TONE button
SOUND EDIT
SOUND EDIT button
TUNER MEMORY/ P. SCAN button
TUNER
MEMORY
Number(0~9) buttons
SLEEP button
LOGO COPY button
Tuning Preset/CD Skip button
PL II EFFECT button
TUNING button
VOLUME button
RETURN button
Stop button
ZOOM
ZOOM button
CANCEL button
DIGEST button
1p~32p(DS110)-GB
9/16/04 9:29 AM
Page 13
PREPARATION
Insert Remote Batteries
1
Remove the battery
cover on the back
of the remote by
pressing down and
sliding the cover in
the direction of the
arrow.
Caution
2
Insert two 1.5V AAA
batteries, paying
attention to the correct
polarities (+ and –).
3
Replace the battery
cover.
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
• Use the correct type of batteries.Batteries that look similar may differ in voltage.
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
Range of Operation of the Remote Control
The remote control can be used up to approximately 23
feet/7 meters in a straight line. It can also be operated at
a horizontal angle of up to 30° from the remote control
sensor.
To open the remote control cover, push the
top of the cover, then slide downward.
10
1p~32p(DS110)-GB
9/16/04 9:29 AM
Page 14
Connecting to the Speakers
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
C
L
SW
R
LS
Position of the DVD Player
• Place it on a stand or cabinet shelf, or under
the TV stand.
RS
Selecting the Listening Position
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
Front Speakers L R
• Place these speakers in front of your listening
position, facing inwards (about 45°) toward you.
• Place the speakers so that their tweeters will be at
the same height as your ear.
• Align the front face of the front speakers with the
front face of the center speaker or place them
slightly in front of the center speakers.
Rear Speakers LS RS
• Place these speakers behind your listening position.
• If there isn't enough room, place these speakers to face each other.
• Place them about 60 to 90cm (2 to 3feet) above your ear, facing
slightly downward.
the front and center speakers, the rear speakers are used
* toUnlike
handle mainly sound effects and sound will not come from
them all the time.
Center Speaker C
• It is best to install it at the same height as the front
speakers.
• You can also install it directly over or under the TV.
Subwoofer SW
• The position of the subwoofer is not so critical.
Place it anywhere you like.
• Usually, it is placed by a corner near the front speakers.
11
1p~32p(DS110)-GB
9/16/04 9:29 AM
Page 15
Rear Speaker (L)
Front Speaker (L)
Center Speaker
Green
CONNECTIONS
Blue
White
IMPEDANCE SUBWOOFER : 3Ω
FRONT / CENTER / REAR : 6Ω
CENTER
SUBWOOFER
REAR
L
FRONT
L
REAR
R
FRONT
R
Purple
Red
Gray
Rear Speaker (R)
Front Speaker (R)
Subwoofer
Back of the Speakers
1 Press down the terminal 2 Insert the wire into the
tab on the back of the
speaker.
terminal and release the
terminal tab.
• Insert the black wire into the black
•
(–) terminal and the gray wire into
the gray (+) terminal.
Make sure the polarities (+ and –)
are correctly.
Black
Back of the Main Unit
3
Connect the connecting jacks to
the back of the DVD player.
• Make sure the colors of the speaker terminals
match the colors of the connecting jacks.
• Make sure the polarities (+ and -) are correctly.
Gray
12
1p~32p(DS110)-GB
9/16/04 9:29 AM
Page 16
Connecting the FM and AM Antennas
If AM reception is poor, connect an
outdoor AM antenna(not supplied).
AM Loop Antenna
(supplied)
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
FM Antenna (supplied)
IMPEDANCE SUBWOOFER : 3Ω
FRONT / CENTER / REAR : 6Ω
CENTER
SUBWOOFER
REAR
L
FRONT
L
REAR
R
FRONT
R
FM antenna connection
1. Connect the FM antenna supplied to the FM 75Ω
COAXIAL terminal as a temporary measure.
2. Slowly move the antenna wire around until you
find a location where reception is good, then
fasten it to a wall or other rigid surface.
• If reception is poor, connect an outdoor antenna.
Before attaching a 75Ω coaxial cable (with a standard
type connector), disconnect the supplied FM antenna.
Cooling Fan
IMPEDANCE SUBWOOFER : 3Ω
FRONT / CENTER / REAR : 6Ω
CENTER
REAR
L
AM antenna connection
1. Connect the AM loop antenna supplied
to the AM and
terminals.
2. If reception is poor, connect an outdoor
single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna
connected).
The cooling fan dissipates the heat generated inside the unit so that the unit can be operated
normally. The cooling fan is activated automatically to supply cool air to the unit.
Please observe the following cautions for your safety.
FRONT
L
• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
SUBWOOFER
REAR
R
FRONT
R
13
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
1p~32p(DS110)-GB
9/16/04 9:29 AM
Page 17
Connecting the Video to TV
IMPEDANCE SUBWOOFER : 3Ω
FRONT / CENTER / REAR : 6Ω
CENTER
FRONT
L
REAR
R
FRONT
R
CONNECTIONS
SUBWOOFER
REAR
L
METHOD 1
VIDEO
METHOD 2
METHOD 3
Component
Video
METHOD 1 Composite Video ............... Good Quality
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the
system to the VIDEO IN jack on your television.
METHOD 2 Scart ...............Good Quality
If your television is equipped with a SCART input,Connect the supplied video cable from
the VIDEO OUT jack on the back panel of the system to the VIDEO jack on the Scart Jack,
then connect the SCART jack to the SCART IN jack on your television.
METHOD 3 Component (Progressive Scan) Video ............... Better Quality
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
Note
•
When the Progressive scan mode is selected, the VIDEO output do not feed
any signals.
14
1p~32p(DS110)-GB
9/16/04 9:30 AM
Page 18
Connecting to External Components
External Digital
Components
For connection to external
equipment with digital output.
Example: CD recorders, MD (Mini Disc) D/A converters
or other components equipped with digital
output jacks
(not supplied)
Optical Cable
IMPEDANCE SUBWOOFER : 3Ω
FRONT / CENTER / REAR : 6Ω
CENTER
REAR
L
FRONT
L
VOLTAGE
SELECTOR
SUBWOOFER
REAR
R
FRONT
R
The AC Cord must be plugged into an
appropriate socket.
Before plugging your system into an AC
outlet, you must check the voltage.
Audio Cable (Red/White)
If the external analog
component has only one
output jack, you may connect
either L or R.
1. Plug the AC Cord on the rear of the
system into an appropriate outlet.
2. Press the On/Standby button to switch
your DVD Player system on.
External Analog
Components
Connect to external equipment with
analog output.
Example: Video, TV, etc.
Note
• Always connect the video and audio connection cables to the equivalent
colored jack.
To Play External Digital/Analog Equipment
Press AUX on the remote control to select ‘DIGITAL IN’.
• Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX ➝ FM ➝ AM.
15
1p~32p(DS110)-GB
9/16/04 9:30 AM
Page 19
P.SCAN(Progressive Scan) Function
Unlike regular Interlace Scan, in which two fields of picture information alternate to create the
entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of
information (all lines displayed in one pass) to create a clear and detailed picture without
visible scan lines.
Press STOP button.
• When disc is played back, press the STOP button twice so that “STOP”, appears on the display.
2
Press and hold P.SCAN button on the remote control for over 5 seconds.
• Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace Scan"
•
repetitively.
When you select P.SCAN, "P.SCAN" will appear on the display
What is Progressive (or Non-Interlaced) Scanning?
Interlaced Scan (1 FRAME = 2 FIELDS)
In interlaced-scan video, a frame consists of two interlaced fields (odd and even), where each field contains
every other horizontal line in the frame.
The odd field of alternating lines is displayed first, and
then the even field is displayed to fill in the alternating
gaps left by the odd field to form a single frame.
One frame, displayed every 1/30th of a second, contains
two interfaced fields, thus a total of 60 fields are displayed every 1/60th of a second.
The interlaced scanning method is intended for capturing
a still object.
Note
Progressive Scan (FULL FRAME)
The progressive scanning method scans one full frame of
video consecutively down the screen, line by line.
An entire image is drawn at one time, as opposed to the
interlaced scanning process by which a video image is
drawn in a series of passes.
The progressive scanning method is desirable for dealing
with moving objects.
• This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support
•
Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive
scan TVs.)
Depending on the brand and model of your TV, this function may not work.
Selecting the Video Format
Press and hold NTSC/PAL button on the remote controller for over 5 seconds while the power is turned off.
• "NTSC" or "PAL" will appear in the display.
•
•
At this time, press the NTSC/PAL button shortly to select between "NTSC" and "PAL".
Each country has a different video format standard.
For normal playback, the video format of the disc must be the same as the video format of your TV.
16
CONNECTIONS
1
1p~32p(DS110)-GB
9/16/04 9:30 AM
Page 20
Disc Playback
1
Press OPEN/CLOSE button to
open the disc tray.
2
Load a disc.
• Place a disc gently into the tray with the
disc’s label facing up.
3
Press OPEN/CLOSE button
to close the disc tray.
DVD
VCD
CD
• Playback starts automatically.
Note
• Depending on the content of the disc, the
initial screen may appear different.
To stop playback,
press STOP during playback.
To temporarily pause playback,
press PLAY/PAUSE during playback.
• If pressed once, “PRESS PLAY” is displayed and the
• To resume playback, press PLAY/PAUSE
•
stop position will be stored in memory. If PLAY/PAUSE
(
) button or ENTER button is pressed, playback
resumes from the stop position. (This function works
only with DVDs.)
If pressed twice, “STOP” is displayed, and if
PLAY/PAUSE (
) button is pressed, playback
starts from the beginning.
17
button again.
1p~32p(DS110)-GB
9/16/04 9:30 AM
Page 21
MP3-CD Playback
Data CDs (CD-ROMs, CD-Rs, CD-RWs) encoded in MP3 format can be played.
MP3
1
Press the
OPEN/CLOSE
button to open the
disc tray, and then
load the MP3 disc.
2
In Stop mode, use
to
select the album,
and then press the
ENTER button.
4
Press the STOP
button to stop
playback.
• The MP3 menu screen will appear
and playback will start.
OPERATION
• Depending on the MP3 disc, the
appearance of the menu may be
different.
3
P. SCAN
To change the album,
use
to
select another album
in Stop mode, and
then press the
ENTER button.
• To select another album and track,
repeat Steps 2 and 3 above.
Note
• Depending on the recording mode, some MP3-CDs cannot be played.
• Table of contents of a MP3-CD varies depending on the MP3 track format
recorded on the disc.
18
1p~32p(DS110)-GB
9/16/04 9:30 AM
Page 22
JPEG File Playback
JPEG
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored
on a CD and then played back with this DVD player.
Slide Mode
1
Place the JPEG disc on the disc tray.
2
Press the OPEN/CLOSE button.
• Playback starts automatically.
• Each image is shown for 5 seconds before another image is displayed.
3
Press SLIDE MODE button.
• Playback starts automatically.
• Each time the button is pressed, the image makes the transition as follows:
From top to bottom
P. SCAN
From bottom to top
Rectangular shape in the center
Vertical curtain shape
Each time a new image is displayed, slide modes
(1~11) will be randomly and automatically be applied.
Cancels the slide mode.
19
Press
to skip to the next slide.
• Each time the button is pressed, the slide moves backward or forward.
1p~32p(DS110)-GB
9/16/04 9:30 AM
Page 23
Digest Function
You can view 9 JPEG images on the TV screen.
1
Press DIGEST
button during
playback.
2
• JPEG files will be shown in
Press Cursor , , , buttons
to select the desired image and
then press ENTER button.
• The selected image is played for 5 seconds before moving
9 windows.
to the next image.
OPERATION
To view the previous or next image with 9 windows, press
.
Rotate/Flip Function
Press Cursor
,
,
,
buttons during playback.
button: Flip Vertically
button: Rotate 90°
Counterclockwise
button: Rotate 90° Clockwise
Original Image
button: Flip Horizontally
20
1p~32p(DS110)-GB
9/16/04 9:30 AM
Page 24
Displaying Disc Information
You can view playback information on the disc on the TV screen.
Press INFO button.
• Each time the button is pressed, the display changes as
follows:
DVD
VCD
CD
MP3
JPEG
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
The information display
disappears from the screen
The information display
disappears from the screen
•
The information display
disappears from the screen
appears on the TV screen!
If this symbol appears on the TV screen while buttons are being operated, that
operation is not possible with the disc currently being played.
Note
• What is a Title?
• Depending on the disc, the disc
•
information display may appear different.
Depending on the disc, you can also
select DTS, DOLBY DIGITAL, or PRO
LOGIC.
A movie contained in a DVD disc.
• What is a Chapter?
Each title on a DVD disc is divided into several smaller sections called
"chapters".
• What is a Track (File)?
A section of video or a music file recorded on a VCD, CD, or MP3-CD.
Screen Display
DVD display
MP3 CD display
TRACK (FILE) display
AUDIO LANGUAGE display
DOLBY DIGITAL display
VCD display
TITLE display
ELAPSED TIME display
SUBTITLE display
ANGLE display
CD display
CHAPTER display
REPEAT PLAYBACK display
STEREO (L/R) display
21
1p~32p(DS110)-GB
9/16/04 9:30 AM
Page 25
Checking the Remaining Time
Press the REMAIN button.
• For checking the total and remaining time of a title or chapter
being played.
Each time the REMAIN button is pressed
DVD
CD
TITLE ELAPSED
TRACK ELAPSED
TITLE REMAIN
TRACK REMAIN
CHAPTER ELAPSED
TOTAL ELAPSED
CHAPTER REMAIN
TOTAL REMAIN
MP3
TRACK REMAIN
TRACK ELAPSED
22
OPERATION
P. SCAN
VCD
1p~32p(DS110)-GB
9/16/04 9:30 AM
Page 26
Fast/Slow Playback
Fast Playback
Press and hold
DVD
VCD
CD
MP3
.
• Each time the button is held down during playback,
the playback speed changes as follows:
Slow Playback
Press SLOW button.
• Each time the button is pressed during playback,
the playback speed changes as follows:
DVD
VCD
P. SCAN
Note
23
• Reverse slow playback does not work with VCDs.
1p~32p(DS110)-GB
9/16/04 9:30 AM
Page 27
Skipping Scenes/Songs
DVD
VCD
MP3
Briefly press
.
• Each time the button is pressed briefly during playback, the previous or next chapter, track, or
directory (file) will be played.
• But, you cannot skip chapters consecutively.
VCD
DVD
MP3
TITLE 01/05 CHAPTER 002/040
DVD RECEIVER
SMART NAVI
DVD RECEIVER
OPERATION
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
TITLE 01/05 CHAPTER 004/040
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
• When watching a VCD with a track
longer than 15 minutes, each time
is pressed, playback
will skip back or forward 5 minutes.
Playing Frame by Frame
DVD
VCD
Press STEP button.
• The picture moves forward one frame each time the
button is pressed during playback.
Note
• During fast playback of a CD or MP3-CD, sound is heard only at 2x speed,
and not at 4x, 8x, and 32x speeds.
• No sound is heard during slow playback and step motion playback.
24
1p~32p(DS110)-GB
9/16/04 9:30 AM
Page 28
Repeat Playback
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
DVD
VCD
CD
MP3
JPEG
Press REPEAT button.
• Each time the button is pressed during playback, the repeat playback mode changes as follows:
DVD
MP3
JPEG
Repeat Playback Options
CHAPTER
Repeatedly plays the selected chapter.
TITLE
Repeatedly plays the selected title.
RANDOM
Plays tracks in random order.
(A track that has already been played may
be played again.)
VCD
TRACK
Repeatedly plays the selected track.
CD
DIR
Repeatedly plays all tracks in the selected
folder.
DISC
Repeatedly plays the entire disc.
OFF
Cancels Repeat Playback.
To Select a Repeat Playback Mode in the Disc Information Screen
Note
• Repeat playback operation is
not possible with version 2.0
VCD discs if PBC is turned
on. To use Repeat Playback
on a VCD with PBC, you
should set the PBC to OFF in
the disc menu. (See page
31.)
25
1
2
Press INFO button twice.
3
Press Cursor button
to select the desired
Repeat Playback mode.
4
Press ENTER button.
DVD
Press Cursor button to
move to REPEAT
PLAYBACK (
) display.
VCD
CD
MP3 and JPEG discs, you cannot select Repeat
* For
Play from the information display screen.
1p~32p(DS110)-GB
9/16/04 9:30 AM
Page 29
A-B Repeat Playback
DVD
1
VCD
CD
Press INFO button
twice.
2
Press Cursor button
to move to REPEAT
PLAYBACK ( ) display.
4
Press ENTER
button at the end
of the desired
• For a VCD or CD, press INFO
button once.
• When ENTER button is pressed,
the selected position will be stored
in memory.
• The specified segment will be
played repeatedly.
A-
A-B
REPEAT : A—B
A -?
P. SCAN
REPEAT : A—
To return to normal playback, press Cursor
buttons to select
OFF.
,
Note
• The A-B Repeat function will not work on an MP3 or JPEG disc.
26
OPERATION
3
Press Cursor , buttons
to select ‘A-’ and then press
ENTER button at the beginning
of the desired segment.
1p~32p(DS110)-GB
9/16/04 9:30 AM
Page 30
Angle Function
This function allows you to view the same scene in different angles.
DVD
1
Press INFO button.
2
Press Cursor
button to move to
ANGLE ( ) display.
1/3
3
1/3
Press Cursor , buttons or numeric
buttons to select the desired angle.
• Each time the button is pressed, the angle changes as follows:
1/3
2/3
3/3
P. SCAN
Note
• The Angle function works only with discs on which multiple
angles have been recorded.
27
1p~32p(DS110)-GB
9/16/04 9:30 AM
Page 31
Zoom Function
This function allows you to enlarge a particular area of the displayed image.
Zoom (Screen Enlarge) Function
1
Press ZOOM
button.
2
Press Cursor , ,
, buttons to
move to the area
you want to enlarge.
DVD
3
VCD
Press ENTER
button.
• Each time the button is pressed, the
zoom level changes as follows:
SELECT ZOOM POSITION
OPERATION
Aspect Ratio
DVD
Press EZ VIEW button.
• Each time the button is pressed, the zoom function will switch between On
and Off.
• When a movie is played in Widescreen format, black bars at the top and
bottom of the TV screen can be removed by pressing the EZ VIEW button.
EZ VIEW
EZ VIEW OFF
Note
• This function will not work if the DVD is recorded with multi-camera angle format.
• Black bars may not disappear because some DVD discs have a built-in horizontal to vertical ratio.
28
1p~32p(DS110)-GB
9/16/04 9:30 AM
Page 32
Selecting Audio/Subtitle Language
Audio Language Selection Function
1
Press INFO button
twice.
2
DVD
Press Cursor ,
buttons or numeric
buttons to select the
desired audio language.
• Depending on the number of languages on a
DVD disc, a different audio language (KOREAN,
ENGLISH, JAPANESE, etc.) is selected each
time the button is pressed.
SP 2/3
FR 3/3
Subtitle Language Selection Function
1
Press INFO button
twice.
2
DVD
Press Cursor
button to move to
SUBTITLE ( )
display.
P. SCAN
EN
3
Press Cursor
button or numeric
buttons to select
the desired subtitle.
EN 1/3
EN 01/ 03
OFF
SP 02/ 03
Note
FR 03/ 03
OFF / 03
29
• You can use the SUBTITLE button
•
on the remote control to select a
subtitle language.
Depending on the disc, the Subtitle
and Audio Language functions may
not work.
1p~32p(DS110)-GB
9/16/04 9:30 AM
Page 33
Moving Directly to a Scene/Song
DVD
1
VCD
CD
Moving to a Title/Track
Press INFO button.
01/05
001/040
0:00:37
1/1
Press Cursor ,
buttons or numeric buttons
to select the desired
chapter and then press
ENTER button.
01/05
MP3
025/040
0:00:01
03/05
001/002
0:00:01
1/1
Press Cursor ,
buttons to move to
time display.
01/05
025/040
1:17:30
01/05
1/1
Moving to a Specific Time
5
3
Press Cursor ,
buttons to move to
Chapter ( ) display.
001/040
0:00:01
1/1
Moving to a Specific Time
6
1/1
OPERATION
Moving to a Chapter
4
2
Press Cursor , buttons
or numeric buttons to select
the desired title/track and then
press ENTER button.
Moving to a Chapter
Press the numeric
buttons to select the
desired time and then
press ENTER button.
01/05
028/040
1:30:00
1/1
JPEG
Press the numeric
buttons.
• The selected file will be played.
• An MP3 or JPEG disc cannot be moved
Note
• You can press
•
on the
remote control to move directly to the
desired title, chapter, or track.
Depending on the disc, you may not
be able to move to the selected title
or time.
from the disc information screen.
• When playing an MP3 or JPEG disc, you
cannot use
,
to move a folder.
To move a folder, press (Stop) and
then press
, .
30
1p~32p(DS110)-GB
9/16/04 9:30 AM
Page 34
Using Disc Menu
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
DVD
1
Press MENU
button.
• When playing a VCD (version
2.), this toggles between PBC
ON and OFF.
3
Press Cursor ,
, buttons to
select the desired
item.
2
Press Cursor ,
buttons to move to
‘DISC MENU’ and then
press ENTER button.
• When you select the disc menu that is not
supported by the disc, the "This menu is not
supported" message appears on the screen.
4
Press ENTER
button.
Note
PBC (Playback Control) Function
Press the MENU button while VCD 2.0 version disk is played.
Each time you press the button, "PBC ON" and "PBC OFF" will be repetitively selected in the display.
• PBC ON: This VCD disc is version 2.0. The disc is played back according to the menu screen.
Some functions may be disabled. When some functions are disabled, select "PBC OFF" to enable them.
• PBC OFF: This VCD disc is version 1.1. The disc is played back in the same way as with a music CD.
31
P. SCAN
1p~32p(DS110)-GB
9/16/04 9:30 AM
Page 35
Using the Title Menu
For DVDs containing multiple titles, you can view the title of each movie.
Depending on the disc, this function may either not work at all or may work differently.
DVD
1
Press MENU
button.
2
Press Cursor ,
button to move to
‘Title Menu’.
3
Press ENTER
button.
• The title menu appears.
OPERATION
Press MENU button to exit the setup screen.
32
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 34
Setting the Language
OSD language is set to English by default.
1
Press MENU
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
P. SCAN
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
33
33P~64P(DS110)-GB
3
9/16/04 9:31 AM
Press ENTER
button.
Page 35
4
Press Cursor ,
button to select the
desired item and then
press ENTER button.
5
Press Cursor ,
button to select the
desired language and then
press ENTER button.
• Once the setup is complete, if the language was
set to English, OSD will be displayed in English.
SETUP
Selecting the
OSD Language
Selecting the
Audio Language
(recorded on the disc)
Selecting the
Subtitle Language
(recorded on the disc)
Selecting the Menu Language
(recorded on the disc)
language you selected is
* Ifnottherecorded
on the disc, menu
language will not change even
if you set it to your desired
language.
34
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 36
Setting TV Screen type
Depending on your TV type (Wide Screen TV or conventional 4:3 TV), you can select the
TV's aspect ratio.
1
3
Press MENU button.
Press Cursor
button to move to ‘TV
DISPLAY’ and then
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
4
Press Cursor ,
button to select the
desired item and then
press ENTER button.
• Once the setup is complete, you will
be taken to the previous screen.
P. SCAN
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
35
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 37
Adjusting the TV Aspect Ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of widescreen and high
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different
screen size, you should adjust the aspect ratio to fit your TV or monitor.
✱ For a standard TV, select either "4:3LB" or "4:3PS" option according to
personal preference. Select "16:9" if you have a widescreen TV.
WIDE
: Select this to view a 16:9 picture in the full-screen
mode on your widescreen TV.
• You can enjoy the widescreen aspect.
4:3LB
(4:3 Letterbox)
: Select this to play a 16:9 picture in the letter box
mode on a conventional TV.
• Black bars will appear at the top and bottom of the screen.
: Select this to play a 16:9 picture in the pan & scan
mode on a conventional TV.
SETUP
4:3PS
(4:3 Pan&Scan)
• You can see the central portion of the screen only (with the
sides of the 16:9 picture cut off).
Note
• If a DVD is in the 4:3 ratio, you cannot view it in widescreen.
• Since DVD discs are recorded in various image formats, they will look different depending on
the software, the type of TV, and the TV aspect ratio setting.
36
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 38
Setting Parental Controls (Rating Level)
Use this to restrict playback of adult or violent DVDs you do not want children to view.
1
P. SCAN
37
Press MENU button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
33P~64P(DS110)-GB
3
9/16/04 9:31 AM
Press Cursor
button to move to
‘PARENTAL’ and then
press ENTER button.
Page 39
4
Press Cursor , button
to select the desired rating
level and then press
ENTER button.
• If you have selected Level 6, you
•
cannot view DVDs with Level 7 or
higher.
The higher the level, the closer the
content is to violent or adult material.
5
Enter the password
and then press
ENTER button.
• The password is set to "7890" by default.
• Once the setup is complete, you will be
taken to the previous screen.
SETUP
Note
• This function works only if a DVD disc contains the rating level information.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
38
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 40
Setting the Password
You can set the password for the Parental (rating level) setting.
Press MENU
1
button.
4
P. SCAN
Press ENTER
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Press Cursor button
to move to
‘PASSWORD’ and then
press ENTER button.
3
Enter the password
and then press
ENTER button.
• Enter the old password, a new password,
and confirm new password.
• The setting is complete.
Note
• The password is set to
"7890" by default.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
39
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 41
AV SYNC Setup
Video may look slower than the audio if it is connected with digital TV.
In this case, adjust the delay time of audio to optimal status to fit the video.
1
Press the MENU button.
• Setup menu appears.
• AV-SYNC screen appears.
• 'Audio' menu appears.
4
Press Cursor
, buttons
to select the Delay Time of
AV-SYNC and then press the
ENTER button.
• You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
40
SETUP
3
Press Cursor ,
buttons
to move to ‘AV-SYNC’ and
then press ENTER button.
2
Press Cursor , buttons
to move to ‘Audio’ and then
press ENTER button.
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 42
Setting the Wallpaper
JPEG
DVD
VCD
While watching a DVD, VCD or JPEG CD, you can set the image you like as a wallpaper.
Setting the Wallpaper
1
During playback, press
PLAY/PAUSE button
when the image you
like comes up.
2
Press LOGO
button.
• “COPY LOGO DATA” will be
displayed on the TV screen.
COPY LOGO DATA
PAUSE
3
The power will turn off
and then back on and
the disc tray will open
automatically.
• The selected wallpaper will be
displayed.
4
• You can repeat Steps 1 and 2 to
set up to 3 wallpapers.
Select this to set the
Samsung Logo image as
your wallpaper.
41
Press OPEN/
CLOSE to close
the disc tray.
Select this to set the desired
image as your wallpaper.
P. SCAN
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 43
To Change the Wallpaper
4
Press to select
the desired ‘USER’,
and then press
ENTER.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Press MENU
button to exit the
setup screen.
3
Press Cursor
button to move to
‘LOGO’ and then
press ENTER button.
SETUP
1
Press MENU
button.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
42
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 44
Setting the Speaker Mode
Signal outputs and frequency responses from the speakers will automatically be adjusted
according to your speaker configuration and whether certain speakers are used or not.
1
Press MENU button.
3
In the Speaker
Setup, press the
ENTER button again.
2
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
4
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
• For C, LS, and RS, each time the button
•
is pressed, the mode switches
alternately as follows: SMALL ➝ NONE.
For L and R, the mode is set to SMALL.
P. SCAN
SMALL : Select this when using the speakers.
NONE : Select this when no speakers are installed.
Note
• Depending on PRO LOGIC and STEREO, the speaker mode may vary.
43
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 45
Setting the Test Tone
Press the Test Tone to check the speaker connections and to adjust the speaker levels.
1
Press MENU button.
2
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
3
Press Cursor button
to move to ‘TEST
TONE’ and then press
ENTER button.
• The test tone will be sent to L ➝ C ➝
R ➝ RS ➝ LS ➝ SW in that order.
If the ENTER button is pressed again
at this time, the test tone will stop.
SETUP
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
When manually testing using the TEST TONE button
Press TEST TONE button.
•
•
Test tone will be produced as follows:
When playing a DVD or CD, this will work
only in Stop mode.
Use this function to check that each speaker is
correctly connected and that there is no problem.
To end the test tone,
press TEST TONE button.
L: Front Speaker (L)
R: Front Speaker (R)
C: Center Speaker
LS: Rear Speaker (L)
SW: Subwoofer
RS: Rear Speaker (R)
Multi-Channel Pro Logic Mode
Start
44
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 46
Setting the Delay Time
If the speakers cannot be placed at equal distances from the listening position, you can adjust the
delay time of the audio signals from the center and rear speakers.
1
Press MENU button.
2
Press Cursor button
to move to ‘Audio’ and
then press ENTER
button.
P. SCAN
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a delay
effect to the sound of the Center Speaker and Surround Speakers.
Note
(Dolby Pro Logic II), the delay time may be different for each mode.
• With
• With AC-3 and DTS, the delay time is set between 00 and 15mSEC.
45
33P~64P(DS110)-GB
3
9/16/04 9:31 AM
Press Cursor button
to move to ‘DELAY
TIME’ and then press
ENTER button.
Page 47
4
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
5
Press Cursor ,
to set the Delay
time.
• You can set the delay time for C
between 00 and 05mSEC and for
LS and RS between 00 and
15mSEC.
SETUP
• Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance between Df and Dc
0.00 m
0.34 m
0.68 m
1.02 m
1.36 m
1.70 m
Delay Time
0 ms
1 ms
2 ms
3 ms
4 ms
5 ms
• Setting REAR (SURROUND) SPEAKERS
If the distance of Df is equal to the distance of Ds
in the figure, set the mode as 0ms. Otherwise,
change the setting according to the table.
Distance between Df and Ds
0.00 m
1.02 m
2.04 m
3.06 m
4.08 m
5.10 m
Ideal CENTER
SPEAKER placement
Delay Time
0 ms
3 ms
6 ms
9 ms
12 ms
15 ms
Ideal
SURROUND
SPEAKER
placement
It is desirable to place all speakers within this circle.
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER
46
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 48
Setting the Audio Quality
You can adjust the balance and level for each speaker.
Method 1
When adjusting the audio quality using the setup screen
1
Press MENU button.
3
Press Cursor button
to move to ‘SOUND
EDIT’ and then press
ENTER button.
2
Press Cursor
button to move to
‘Audio’ and then press
ENTER button.
4
Press Cursor , ,
, buttons to select
the desired item and then
press ENTER button.
P. SCAN
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
47
33P~64P(DS110)-GB
9/16/04 9:31 AM
When manually adjusting with the SOUND EDIT button
Method 2
Adjusting Front Speaker Balance
1
TITLE
Page 49
Press SOUND
EDIT button and
then press Cursor
, .
CHAP PRGM RDS RT
ST
TUNED
Adjusting Rear Speaker Balance
Adjusting Center Speaker Level
Press SOUND
EDIT button and
then press Cursor
, .
Press SOUND
EDIT button and
then press Cursor
, .
2
TITLE
CHAP PRGM RDS RT
ST
kHz
MHz
Adjusting Rear Speaker Level
TITLE
CHAP PRGM RDS RT
ST
TUNED
TITLE
kHz
MHz
CHAP PRGM RDS RT
ST
TUNED
kHz
MHz
Adjusting Subwoofer Speaker Level
5
TITLE
SETUP
4
Press SOUND
EDIT button and
then press Cursor
, .
TUNED
3
Press SOUND
EDIT button and
then press Cursor
, .
CHAP PRGM RDS RT
kHz
MHz
ST
TUNED
kHz
MHz
Note
Adjusting Front/Rear Speaker Balance
• You can select between 00 and –06 and OFF.
• The volume decreases as you move closer to –6.
Adjusting Center/Rear/Subwoofer Speaker Level
• The volume level can be adjusted in steps from +6dB to –6dB.
• The sound gets louder as you move closer to +6dB and smaller as you get closer to -6dB.
48
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 50
Setting the DRC (Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at
low volume at night.
1
Press MENU button.
2
3
Press Cursor button to
move to ‘DRC’ and then
press ENTER button.
4
Press Cursor button to
move to ‘Audio’ and then
press ENTER button.
Press Cursor ,
adjust the ‘DRC’.
• The Cursor
the Cursor
to
button is pressed, the greater the effect, and
button is pressed, the smaller the effect.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
49
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 51
Sound Field (DSP)/EQ Function
DSP(Digital Signal Processor) DSP modes have been designed to simulate different acoustic environments.
EQ: You can select from ROCK, POP, or CLASSIC, depending on the genre of music.
Press DSP/EQ button.
• "DSP" appears on the display panel.
• Each time the button is pressed, the selection changes as follows:
SETUP
P. SCAN
Note
POP, JAZZ, ROCK: Depending on the genre of music, you can select from POP, JAZZ, and ROCK.
STUDIO : Provides a sense of presence as if in a studio.
CLUB : Simulates the sound of a dance club with a throbbing bass beat.
HALL : Provides a clear vocal as if listening in a concert hall.
MOVIE: Provides the feeling of a movie theater.
CHURCH: Gives the feel of being in a grand church.
PASS: Select this for normal listening.
50
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 52
Dolby Pro Logic II Mode
You can select the desired Dolby Pro Logic II audio mode.
Press
PL II MODE button.
• Each time the button is pressed, the mode changes as follows.
P. SCAN
Note
• When selecting Pro Logic II mode, connect your external device to the
AUDIO INPUT jacks (L and R) on the player. If you connect to only one of
the inputs (L or R), you cannot listen to 5.1 channel surround sound.
PRO LOGIC II
• MUSIC: When listening to music, you can experience sound effects as if you are listening to the actual performance.
• CINEMA: Adds realism to the movie soundtrack.
• PRO LOGIC: You will experience a realistic multi-channel effect, as if using five speakers, while using just the front left
and right speakers.
• MATRIX: You will hear 5.1 channel surround sound.
STEREO: Select this to listen to sounds from the front left and right speakers and the subwoofer only.
51
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 53
Dolby Pro Logic II Effect
This function works only in Dolby Pro Logic MUSIC mode.
Press
PL II MODE
button to select ‘MUSIC’
mode.
1
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
2
• You can select either 0 or 1.
LINEAR PCM
L
C
LS
DSP TITLE PBC CHAP PRGM RDS RT
TA
ST
TUNED
R
SW
RS
kHz
MHz
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
3
LINEAR PCM
C
LS
DSP TITLE PBC CHAP PRGM RDS RT
TA
RS
ST
LS
TA
ST
CMX
MPEG-2 AAC MPEG
RS
TUNED
kHz
MHz
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
4
TUNED
LINEAR PCM
L
CMX
MPEG-2 AAC MPEG
Note
DSP TITLE PBC CHAP PRGM RDS RT
R
• You can select between 0 and 6.
R
SW
C
SW
kHz
MHz
C
LS
DSP TITLE PBC CHAP PRGM RDS RT
TA
ST
TUNED
R
SW
RS
CMX
MPEG-2 AAC MPEG
kHz
MHz
• When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and
(Dolby Pro Logic II) button does not work.
• PANORAMA: This mode extends the front stereo image to include the surround speakers for
an exciting "wraparound" effect with side wall imaging.
• CENTER WIDTH: Sound is output to the center speaker only. The front left and right speakers
produce phantom sound.
• DIMENSION: Incrementally adjusts the sound field (DSP) from the front or rear.
52
SETUP
• You can select between 0 and 7.
L
LINEAR PCM
L
CMX
MPEG-2 AAC MPEG
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 54
Listening to Radio
You can listen to the chosen band (FM, AM broadcast stations) by using either
the automatic or manual tuning operation.
Remote Control Unit
1
2
Press TUNER/
BAND button.
• The selection toggles back and
forth between "FM ➝ AM" each
time the TUNER(BAND) button
is pressed.
Tune in to the
desired station.
Automatic Tuning 1
Automatic Tuning 2
Manual Tuning
When
is pressed, a
preset broadcast station is
selected.
Press and hold
to
automatically search for
active broadcasting stations.
Briefly press
to
increase or decrease the
frequency incrementally.
Main Unit
1
Press the Function
button to select the
desired band (FM,
AM).
2
Select a broadcast
station.
Press the STOP ( )
button to select
PRESET and then press
button to select the preset station.
Automatic Tuning 1
P. SCAN
Press the STOP ( ) button
to select "MANUAL" and
then press and hold
button to
automatically search the band.
Automatic Tuning 2
STOP ( ) to select
Manual Tuning Press
MANUAL and then briefly
press
to tune in to a lower or
higher frequency.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
53
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
• In a poor reception area, select MONO for a clear, interference-free broadcast.
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 55
Presetting Stations
You can store up to:
• FM
• AM
Frequency Modulation
Medium Wave
Press
to
select "89.10".
3
15 FM stations
15 AM stations
Example: Presetting FM 89.1 in the memory
1
Press the
TUNER(BAND)
button and select
the FM band.
• Each time the button is pressed,
the band switches between
"FM ➝ AM".
TITLE
CHAP PRGM RDS RT
ST
2
• Refer to Step 2 on page 53 to
• “PRGM” flashes in the display.
automatically or manually tune in
to a station.
TUNED
TITLE
CHAP PRGM RDS RT
ST
Press
to select preset
number.
5
RDS RT
ST
TUNED
kHz
MHz
kHz
MHz
6
Press the TUNER
MEMORY button.
To preset another
station, repeat
steps 2 to 5.
• Press the TUNER MEMORY button before
RADIO OPERATION
• You can select between 1 and
TITLE
TUNED
kHz
MHz
4
Press the TUNER
MEMORY button.
‘PRGM’ disappears from the display.
15.
• ‘PRGM’ disappears from the display and
the station is stored in memory.
TITLE
RDS RT
ST
TUNED
TITLE
CHAP
RDS RT
kHz
MHz
To tune in to a preset station, press
remote control to select a channel.
ST
TUNED
kHz
MHz
on the
54
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 56
About RDS broadcasting
Using the RDS (Radio Data System) to receive FM stations
RDS allows FM stations to send an additional signal along with their regular program signals. For
example,the stations send their station names,as well as information about what type of program they
broadcast, such as sports or music,etc.
When tuned to an FM station which provides the RDS service,the RDS indicator
lights up on the display.
• Description on RDS function
1. PTY (Program Type) : Displays the type of programme currently being broadcast
2. PS NAME (Program Service Name) : Indicates the name of broadcasting station
and is composed of 8 characters.
3. RT (Radio Text) : Decodes the text broadcast by a station (if any) and is composed
of maximum 64 characters.
4. CT (Clock Time) : Decodes the real time clock from the FM frequency.
• Some stations may not transmit PTY, RT or CT information therefore this may not be
displayed in all cases.
5. TA (Traffic Announcement) : When this symbol flashes it shows that the traffic
announcement is in progress.
Note
• RDS is not available for AM broadcasts.
• RDS may not operate correctly if the station tuned is not transmitting
RDS signal properly or if the signal strength is weak.
What information can RDS signals provide?
You can see the RDS signals the station sends on the display.
TO show the RDS signals
Press RDS DISPLAY while listening to an FM station.
Each time you press the button, the display change to show you the following information:
PS (Program Service) :While searching,"PS"appears and then the station names will be
displayed."NO PS" appears if no signal is sent.
RT(Radio Text) : while searching,"RT"appears and then text messages the station sends
will be displayed. "NO RT"appears if no signal is sent.
Frequency : station frequency (non-RDS service)
About characters shown in the display
When the display shows PS,or RT signals,the following characters are used.
• The display window cannot differentiate upper case and lower case letters and always
uses upper case letters.
• The display window cannot show accented letters, “A,” for instance, may stans for
accented “A’s” like “À, Â, Ä, Á, Åand Ã.”
Note
55
• If searching finishes at once,“PS”,and “RT” will not appear on the display.
P. SCAN
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 57
PTY (Program Type) indication and PTY-SEARCH function
One of the advantages of the RDS service is that you can locate a particular kind of program from the
preset channels by specifying the PTY codes.
To search for a program using the PTY codes
Before you start, remember...
• The PTY Search is only applicable to preset
•
•
•
stations.
To stop searching any time during the process,
press PTY SEARCH while searching.
There is a time limit in doing the following steps.
If the setting is cancelled before you finish, start
from step 1 again.
When pressing the buttons on the primary remote
control, make sure that you have selected the FM
station using the primary remote control.
1
2
Press the PTY-or PTY+until the PTY code
you want appears on the display.
• The display gives you the PTY codes described
to the right.
Press PTY SEARCH again, while the PTY
code selected in the previous step is still on
the display.
• The center unit searches 15 preset FM
stations,stops when it finds the one you
have selected, and tunes in that station.
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
Program Type
• News including an announced opinion and
report
• Several matters including a current incident,
documentary, discussion and analysis.
• Information including weights and measures,
returns and forecast, matters interesting the
customer, medical information, etc.
• Sports
• Education
• Drama-Radio serial, etc.
CULTURE
• Culture-National or local culture including the
religious problem, social science, language,
theater,etc.
SCIENCE
• Natural science and technology
VARIED
• Others-Speech, amusing program (quiz,
game), interview, comedy and satirical play,
etc.
POP M
• Pop music
ROCK M
• Rock music
M.O.R.M
• Current contemporary music considered to be
“easylistening.”
LIGHT M
• Light classical music- Classical music and
instrumental and chorus music
CLASSIC
• Heavy classical music-Orchestra music,
symphony, chamber music and opera
OTHER M
• Other music - Jazz, R&B country music
WEATHER
• Weather
FINANCE
• Finance
CHILDREN
• Children’s programmes
SOCIAL A
• Social affairs
RELIGION
• Religion
PHONE IN
• Phone in
TRAVEL
• Travel
LEISURE
• Leisure
JAZZ
• Jazz Music
COUNTRY
• Country Music
NATION M
• National Music
OLDIES
• Oldies Music
FOLK M
• Folk Music
DOCUMENT
• Documentary
56
RADIO OPERATION
3
Press PTY SEARCH while listening to an
FM station.
Display
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 58
Convenient Functions
Sleep Timer Function
You can set the time that the DVD player will shut itself off.
Press SLEEP button.
• "SLEEP" will be displayed. Each time the button is pressed
the preset time changes as follows: 10 ➝ 20 ➝ 30 ➝ 60 ➝
90 ➝ 120 ➝ 150 ➝ OFF.
TITLE
CHAP PRGM RDS RT
ST
TUNED
kHz
MHz
To confirm the sleep timer setting, press SLEEP button.
P. SCAN
•The remaining time before the DVD player will shut itself off is displayed.
•Pressing the button again changes the sleep time from what you have set
earlier.
To cancel the sleep timer, press SLEEP button until
OFF appears on the display.
57
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 59
Adjusting Display Brightness
You can adjust the brightness of the display on the
main unit so it won't interfere with your movie viewing.
Press DIMMER button.
• Each time the button is press, the brightness changes as
follows: SLIGHTLY DARK ➞ DARK ➞ BRIGHT.
Mute Function
This is useful when answering a doorbell or
telephone call.
P. SCAN
Press MUTE button.
MISCELLANEOUS
• ‘MUTE’ flash in the display.
• To switch the sound back on, press MUTE again or
the VOLUME buttons.
TITLE
CHAP PRGM RDS RT
ST
TUNED
kHz
MHz
58
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 60
Before Calling for Service
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not
listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact
the nearest authorized dealer or Samsung Electronics Service Center.
Symptom
Disc tray does not open.
Playback does not start.
Check/Remedy
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
• Check the region number of the DVD.
DVD discs purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this DVD
•
player.
Make sure that the rating level is correct.
Playback does not start
• Are you using a deformed disc or a disc with scratches on
the surface?
immediately when the
• Wipe the disc clean.
Play/Pause button is pressed.
Sound is not produced.
• No sound is heard during fast playback, slow playback, and step
motion playback.
• Are the speakers connected properly? Is the speaker setup
correctly customized?
• Is the disc severely damaged?
Sound can be heard only
from a few speakers and
not all six.
Picture does not appear, sound
is not produced, or the disc
tray opens 2 to 5 seconds later.
Dolby Digital 5.1 CH
Surround Sound is not
produced.
59
• When listening to a CD or radio, sound is output to the front
•
•
speakers (L/R) only. Select "PRO LOGIC II" by pressing
(Dolby Pro Logic II) on the remote control to use all six speakers.
Make sure that the DVD disc is 5.1-CH compatible.
If you set C, SL, and SR to NONE in the speaker mode in the
audio setup of the setup screen, no sound is heard from the
center speaker and the front left and right speakers. Set C, SL,
and SR to SMALL.
• Was the DVD player suddenly moved from a cold place to a warm
one? When condensation forms inside the player, remove the disc
and let the player stand for 1 or 2 hours with the power on. (You
can use the player again after condensation disappears.)
• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1
•
CH Surround Sound is produced only if the disc is recorded with
5.1 channel sound.
Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in
the information display?
33P~64P(DS110)-GB
9/16/04 9:31 AM
Symptom
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
Page 61
Check/Remedy
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
The remote control does not • Is the remote control being operated within its operation range of
angle and distance?
work.
• Are the batteries exhausted?
Audio language and
subtitles do not work.
• Audio language and subtitles will not work for DVDs not containing
Menu screen does not appear even
when the menu function is selected.
• Are you using a disc that does not contain menus?
them. And depending on the disc, they may work differently.
Aspect ratio cannot be
changed.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
Can't receive radio
broadcast.
• The main unit is not working.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM
(Example: The power goes out or
strange noise is heard.)
antenna in an area with good reception.
• Turn off the power and hold the
button on the main unit for
longer than 5 seconds.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• While “NO DISC” message appears on the display of main unit, hold
The password for rating
level has been forgotten.
the main unit's
button for longer than 5 seconds. “INITIALIZE”
appears on the display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
60
MISCELLANEOUS
• The DVD player is not
working normally.
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 62
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and picture quality or cause breaks in
playback. Be especially careful not to scratch discs when handling them.
Handling discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
Disc Storage
Keep in a cool
ventilated area
Do not keep in
direct sunlight
Caution
Keep in a clean
Protection jacket.
Store vertically.
• Do not allow the discs to become contaminated with dirt.
• Do not load cracked discs or discs that are scratched.
Handling and Storing Discs
When you get fingerprints or dirt on the disc, clean it
with a mild detergent diluted in water and wipe with a
soft cloth.
• When cleaning, wipe gently from the inside to the outside of the disc.
Note
• Condensation may form if warm air comes into contact with cold parts
inside the player. When condensation forms inside the player, the player
may not operate correctly. If this occurs, remove the disc and let the
player stand for 1 or 2 hours with the power on.
61
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 63
Specifications
Power Consumption
110 W
Weight
6.2Kg
Dimensions (W x H x D)
360 x 65 x 408 mm
Operating Temperature Range
+5°C~+35°C
Operating Humidity Range
10%~75%
Usable Sensitivity
10dB
S/N Ratio
60dB
Distortion
0.5%
T Usable Sensitivity
AM U
S/N Ratio
(WM) N
E
R Distortion
54dB
G
E
N
E
R
A
L
T
F U
N
M E
R
O
U
T
P
U
T
V
I
D
E
O
A
M
P
L
I
F
I
E
R
Composite Video
2%
1.0Vp-p(75Ω load)
Y:1.0 Vp-p (75 Ω load)
Component Video
Pr:0.70 Vp-p (75 Ω load)
Pb:0.70 Vp-p (75 Ω load)
Front speaker output
40W(6Ω)/CH
35 W(6 Ω)/CH (U.K only)
Center speaker output
40W(6Ω)
35 W(6 Ω) (U.K only)
Rear speaker output
40W(6Ω)/CH
35 W(6 Ω)/CH (U.K only)
Subwoofer speaker output
55W(3Ω)
Frequency range
20Hz~20kHz
S/N Ratio
75dB
Channel separation
50dB
Input sensitivity
(AUX)500mV
Speaker system
MISCELLANEOUS
S
P
E
A
K
E
R
40dB
5.1ch speaker system
Front/Center/Rear speaker
Subwoofer speaker
Impedance
6Ω x 5
3Ω
Frequency range
150Hz~20kHz
30Hz~150Hz
Output sound pressure level
85dB/W/M
86dB/W/M
Rated input
40W
35 W (U.K only)
Maximum input
80W
70 W (U.K only)
Dimensions (W x H x D)
85 x 94 x 93.2 mm
Weights
0.3 Kg
55W
110W
130 x 320 x 335 mm
4.3 Kg
62
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 64
Notes on Terminology
ANGLE
CHAPTER
NUMBER
Recorded onto some DVD discs are scenes which have been simultaneously shot from a number
of different angles (the same scene is shot from the front, from the left , from the right , etc.).
With such discs, the Angle button can be used to change the angle of view for specific scenes.
These numbers are recorded on DVD discs. A Title is subdivided into many
sections, each of which is numbered, and specific parts of the video can be
searched quickly using these numbers.
DVD
A high-density optical disc on which high-quality pictures and sound have been recorded by
means of digital signals. Incorporating a new video compression technology (MPEG-2) and highdensity recording technology, a DVD disc comprises two 0.6 mm thick discs bonded together.
PCM
An acronym for Pulse Code Modulation - another name for digital audio.
PBC
(PLAYBACK
CONTROL)
This is recorded on a video CD (version 2.0). Selected scenes or information can
be chosen from the menu displayed on the TV monitor.
REGION NUMBER
Both the DVD player and DVD discs are encoded with a region number.
If the region number on the DVD disc does not correspond to the region number
of the DVD player, the player cannot play the disc.
SUBTITLES
Translated appearing at the bottom of the screen. A DVD disc can contain up to
32 subtitle languages.
TITLE NUMBER
These numbers are recorded on DVD discs. When a disc contains two or more
movies, these movies are numbered as Title 1, Title 2, etc.
TRACK NUMBER
VIDEO CD
These numbers are assigned to the tracks which are recorded on video and
audio CDs. They enable specific tracks to be located quickly.
Contains recordings of pictures and sound whose quality is roughly comparable
to that of video tape.
This player also supports video CDs with playback control (version 2.0).
You can enjoy 5.1 (or 6) channels of high fidelity digital sound from various
digital input sources such as DVD, CD etc.
DTS provides a realistic, clear surround sound that has not previously been
available from conventional surround sound.
5.1 (or 6) Channel Digital Surround sound reproduced from DVDs and LDs
recorded as a digital signals (with
disc marking). With better sound quality,
dynamic range, and directionality than traditional Dolby surround technology, you
can enjoy dynamic, realistic sound.
A 4 channel analog sound reproduced from a program source such as a
videotape or LD with the
mark. You can enjoy a more realistic, robust
sound unavailable from regular stereo sources.
63
33P~64P(DS110)-GB
9/16/04 9:31 AM
Page 65
Memo
MISCELLANEOUS
64
1p~32p(DS110)-GB
9/16/04 9:29 AM
Page 2
THIS APPLIANCE IS MANUFACTURED BY:
AH68-01539B
REV:02