null  null
“Man is free at the moment he wishes to be”
(Voltaire)
Digital Televison, mobile internet threat, white spaces devices
are not a future scenario but your present playground,
BE READY with the new WISYCOM MRK9XX serie:
Extreme Agility, with a working bandwidth of 370 MHz
Highest immunity with movable filters and high power amplifiers
Exclusive solutions like the programmable matrix/combiner
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy
tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
MRK 950
Modular Wireless-Microphone Receiver System
19” 1U module, stackable, with dual true diversity receivers
Main Features
NEW
Extreme RF (radiofrequency) performances and reliability.
Tuning windows up to 370 MHz with tunable filters (2 ch’s independent):
- MRK 950-M 470 MHz to 678 MHz (TV ch 21/46) (option M)
- MRK 950-H 630 MHz to 870 MHz (TV ch 41/70)
- MRK 950-X 470 MHz to 800 MHz (TV ch 21/62) with internal active splitter
- MRK 950-W 470 MHz to 840 MHz (TV ch 21/67) with internal active splitter
Wisycom digital expansion bus (DEXB) for future upgrade/enhancement thru
simple slot-in card (pc-like). DEXB can host DSP (40bit dsp processing) upgrade
cards providing:
o digital output (i.e. AES3, Ethersound)
o multi-companding compatibility
o future digital functionality enhancements.
Balanced electronic AF output (low impedance transformer-coupled optional)
2 USB’s connectors for configuration/monitor and cascade rack connections
Automatic scan for best channels, squelch and other automatic setup
Infrared interface (i.e. for system setup, microphone programming)
Automatic transmitter re-programming (thru infrared)
Software to monitor/setup units and with spectrum field analysis
Optional (upgradable):
Ethernet 10/100 base Tx network interface for configuration/monitor
Digital audio interfaces:
- Ethersound interface
- AES/EBU digital interface (with word-clock in/out)
PTT (Push to Talk) function with audio exit and GPI signals (patented)
Low impedance transformers outputs
General Description
The system presents exceptional selectivity and inter-modulation immunity for best operating
performance of the wireless-microphone system even in the presence of DVTB-T transmitter’s signals.
MRK 950 is designed to be:
 “easy & quick to use” thanks to automatic setup functions (i.e. frequencies, squelch), remote
configuration utilities (USB/Ethernet), display with intuitive context menu navigation.
 “extremely flexible”, in fact each of the two receivers can work in a 240 MHz bandwidth, more than
one rack can be connected together thru a simple USB cable to act a multi-channel receiver.
Moreover, the DSP interface allows the units to work with several digital audio output (i.e. AES/EBU,
Ethersound, …), multi-companding compatibilities and other digital features.
 “best in class performances”, thanks to the latest Wisycom technology the unit has extreme RF
sensitivity and immunity and superb audio quality.
 “a durable & upgradable investment” , thanks to the very robust design (aluminum housing) and
the possibility of upgrade/enhance unit’s performances with simple slot in card (pc-like thru the DEXB
expansion bus).
Moreover, MRK 950 system is already set up for the exclusive PTT function, recently developed by
Wisycom and now appreciated in the broadcast world. It’s able to work directly with the new wireless
microphones provided with built-in telemetry (either body-pack or hand-held transmitters) and Push-ToTalk button: simply pushing this button, the presenter causes the remote switching of the receiver’s
output-line, from the “main line” to the additional “intercom line”, in order to be able to talk “off-air”
directly with the technical team (optionally a stuttering tone is back generated to signal the presenter of
the push to talk status).
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy
tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
MRK 950
Modular Wireless-Microphone Receiver System
19” 1U module, stackable, with dual true diversity receivers
TECHNICAL SPECIFICATIONS
• Frequency ranges : up to 370 MHz switching bandwidth in 470/870 MHz
• Switchable channels : up 1024 (for each channel)
• Frequencies : microprocessor controlled PLL frequency synthesizer circuit, with 25 KHz minimum step.
• Frequency error : < ± 2.5 ppm, within the rated temperature range.
• Temperature range : -10 ÷ + 55 °C.
• Modulation : FM (50µs de-emphasis), other de-emphasis can be pre-set on request and can be recalled
from the menu.
• Nominal deviation : ±40 KHz @ 1 KHz, ±65 KHz peak (Max acceptable deviation = ±80 KHz).
• “A” / “B” antenna inputs : with BNC type female connectors.
• RF input impedance : 50 ohm (SWR < 1:2).
• Sensitivity [1] : (-Ex) < 0.9 µV (-1 dBµV), for SND/N = 52 dBA[2], in the whole switching-range;
(-Ex) < 10 µV (+20 dBµV), for SND/N = 115 dBA[2], in the whole switching-range.
• Amplitude response : < 0.2 dB (for RF input signal: +4 dBµV ÷ +120 dBµV).
• Co-channel rejection : > -3.5 dB @ 2 µV RF; > -1.5 dB @ 100 µV RF.
• Adjacent chan. selectivity : > 90 dB @ ± 300 KHz.
• Spurious rec. rejection : > 90 dB.
• IF image rejection : > 110 dB.
• IIP3 : +25 dBm (Input Intercept Point 3rd order) (-Ex).
• Spurious emissions : < 1pW (typical. = 0.1 pW).
• Squelch : - signal strength squelch: with menu adjustable threshold and “adaptive type” working: the
receiver adapts itself automatically to different conditions of both medium strength and
speed variation of the received signal;
- tone-squelch: it works by decoding the special key, sub-carrier (digitally modulated)
present on the carrier of the actual Wisycom transmitters. The tone squelch function can
be inhibited for compatibility with other types of transmitters.
• Noise Reduction system : compander circuit, can be pre-set (or switched off) to the following modes:
- ENR (Wisycom Extended-NR) as default;
- CUSTOM (to be compatible with other brands transmitters).
• AF line output level : +12 dBu (3.1 Vrms) @ nominal deviation.
• AF line output peak level : +20 dBu (7.75 Vrms).
• AF bandwidth : 40 Hz ÷ 20 KHz.
• Frequency response : < ±0.5 dB (±0.2 dB typ.) in the 50 Hz ÷ 19 KHz range.
• Distortion : < 0.3 % (0.10 % typ.) @ peak deviation.
• SND/N ratio [1] > 115 dBA (118 dBA typ.) [2].
• Monitor output : 1/4” (6.3 mm) stereo jack connector.
• Monitor output level : max 6 Vrms / 150 ohm.
• Monitor out impedance : 50 ohm.
• Diversity technique : true-diversity (Twin receiver circuits).
• Bar-graph meters : - RF field strengths (both “A” and “B” inputs) - AF deviation (5% ÷ 150%), with
peak-hold mode.
• Displays (2): 64 x 160 LCD dot Matrix (blue backlighted)
• Calibrating AF tone : 1 KHz, +12 dBu (other on request).
• Powering : 99 ÷ 138 Vac and 187 ÷ 264 Vac, with automatic switching / 100 VA max.
• Dimensions : 19”/1U.
Note [1]: ENR-system included.
Note [2]: RMS value, A-weighted, 22 Hz / 22 KHz, and referred to the peak deviation.
The MRK 950 Receiver System complies with ETSI 300 422.
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy
tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
DIGITAL OPTIONS
DIGCOM
Mrk950 system can host a digital
companding module (DIGCOM) connected
on its internal expansion bus (DEXB).
This DSP board is designed to assure the
highest SNR and a very low latency time
(0,6 milliseconds). Thanks to the powerful
DSP any specific compander can be
software loaded (and so also all other parameters as battery status and additional checks):
- this assures compatibility with present and future transmitters, and a great quality and
consistency in performances!
AES950
This upgrade option allow AES3 digital
exit on a XLR connector. World clock
input allows audio synchronization.
Working directly on the compressed
signal coming from FM modulation this
board assure a very high SNR and a
very low time delay (0,6 msec).
ETS950
This option upgrades the receiver with add 2 digital
audio ETHERSOUND outputs.
Thanks to this additional board MRK950 can
interoperate in a ETHERSOUND audio distribution
network delivering crystal clear audio and low time
latency (0,6 msec) through a legacy 10/100 Base Tx
network.
The same network can be used to monitor and
control all system parameters!
ACCESSORIES
FLT950
Kit to mount a removable air-filter on
Mrk 950. This is installed on the left
side and can be easily removed for
cleaning.
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy
tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
REMOTE MANAGEMENT
Network connections & audio interfaces
MRK950’s can be easily connected in cascade using the 2 usb ports (current SW version
support 4 racks cascade max for each daisy chain).
On the below example the unit on the top behave as a single 8 receiver rack (concentrating
remoting data from the below receivers); this way all the units can be easily
monitored/configured thru a single USB interface or Ethernet connection (a single IP).
Mrk950 is an upgradable platform with several audio distribution options both analogue (also
available a command line usable to double the audio output) and digital (AES3, Ethersound)
AF cables
Ethernet 10/100 Base Tx
USB
Monitoring
D
I
G
I
T
A
L
D
I
G
I
T
A
L
A
N
A
L
O
G
U
E
Audio distribution
MRK950/920 MANAGER
This is a windows application, that will allow an easy management of one or many receivers,
connected either with USB connection or Ethernet network.
The user can easily monitor all the receivers at a glance, changing basic and advanced
parameters. Frequency and overall setup copied, saved and mirrored among receivers.
The software allows also more advanced functionalities, for instance spectrum monitor (in the
full 240 MHz Mrk950 bandwidth), control of receiver infrared interface for transmitter
reprogramming, inter-modulation check and more!
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy
tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
MTH300 Handheld Wireless Professional Transmitters
Main Features
Up to 122 MHz bandwidth in 470/870 MHz range
Enhanced robustness against intermodulation and
antenna performances thanks to RF part with passband filter and circulator (optional)
NEW CERAMIC
COATING
Thin and ergonomics body design
Ultra-light and tough aluminum alloy body
ENR compander system
Battery:
- 2 AA Alkaline or rechargeable NiMH with quick
release system
Autonomy: about 11h (50mW with Alk. batteries)
more 14h (10mW with Alk. batteries)
Infrared interface
Easy and quick to setup thru an OLED display
1 joggle selectors and 4 quick setup buttons
(level/channel adjustment)
Available also with MCM301/303, premium head (with
custom Schoeps capsule)
General Description
MTH300 is an handheld transmitter especially designed for professional wireless
microphone applications. It is very easy and quick to use thanks to OLED display and
1 joggle selector and 4 buttons for straight setup of gain and channel. MTH300
benefits also of the latest Wisycom RF technology, it has been especially designed for
robustness against noise and inter-modulation (available also with the RF circulator
option).
Open MIC Body:
1
2
1
Exchange head:
unscrew it counter-clockwise
Fig. 1 Display & Setup controls
Unscrew & slide down cover, to
access internal setup controls
and batteries holder & infrared.
3
1
Fig. 3 Wireless
power switch
Wireless power switch
with programmable
LED indication
(green/red).
Fig. 2 Batteries holder and infrared
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy
tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
MTH300 Handheld Wireless Professional Transmitters
TECHNICAL SPECIFICATIONS
1
Switchable channels 320 allocated by 8 groups of 40 channels (in the 470 ÷ 870 MHz range), quickly selectable with dedicated buttons
2
Switching window
Up to 122 MHz, depending on band (see below code table)
3
Frequencies
Quartz PLL frequency synthesizer circuit (25 kHz step)
Frequency stability
▪ ± 2,5 ppm (in the rated temperature range)
▪ ± 2.5 kHz (in the rated temperature range)
Temperature range
-10 ÷ +55 °C
Max RF power
▪ 50 mW (ERP) when high power selected (note: In some countries high power can be disabled, for local norm!)
▪ 10 mW (ERP) when low power selected (to respect some local norm)
Spurious emissions
< 2 nW
Modulation
wideband FM, with 50 µs pre-emphasis
Nominal deviation
±40 kHz (Peak deviation = ±56 kHz)
Telemetry feature
MTH300 transmits also a digitally modulated sub-carrier, suitable for:
▪ tone-squelch operating
▪ remote battery monitoring
▪ optional PTT (push to talk) operation
AF input connection
Directly interchangeable microphone-heads
AF input level
-60 ÷ +0 dBu nominal, quickly settable by steps of 2 dB with dedicated buttons
Max. input level
+6 dBu
Max sound pressure
150 dB SPL (0,5% THD), with MCM301/MCM302/MCM303/MCM304/MCM305 condenser-heads
Noise-Reduction
ENR (Wisycom Extended-NR), with independent Attack- and Recovery-time
AF bandwidth
45 Hz ÷ 21 KHz (3dB)
55 Hz ÷ 20 KHz (1dB)
Distortion
< 0.3 % (0.15 % typ.)
Signal-to-noise ratio
typ. 115 dB (A)rms with 40kHz deviation
typ. 121 dB (A)rms with 56kHz deviation
Led
Led indication with bicolor led (red & green) on wireless power switch:
▪ Wireless transmission status: GREEN on/off
▪ Battery lifetime status: GREEN - steady (> 25%)
- slowly blinking (< 25%) - quickly blinking (<12%)
▪ Modulation peek (if activated): RED
▪ Ptt status: RED if active
Display
High contrast OLED (Organic light-emitting diode) display (96 x 36 pixels)
8 step battery lifetime indication: 7 bars (100%-87%-75%-63-50%-38%-25%) and “empty bar” quickly blinking (12%
remaining)
Power supply
2 AA size cell (Alkaline, rechargeable NiMH)
Battery life (alkaline) approx. 11 hours @ 50mW continuous working; up to 14 hours @ 10mW
Dimensions
 body max. diameter 33 mm (without microphone-head)
 total length 183 mm (without microphone-head)
Weight
Approx 300g, including battery and MCM301 (condenser) mic-head
Note: The above technical specifications refer to the MTH 300 “transmitter” section. The acoustic specs are relevant
to the microphone-head used. The MTH 300 transmitter complies with ETS 300 422.
OPTION CODE MTH300-Y-Z:
▪ COLOR (-Y)
C body color "champagne"
B body color "matt black"
P body color titanium gray,
(ceramic coating)
Before putting the device into operation,
please observe the respective countryspecific regulations
FREQUENCY RANGE (-Z)
x1 470-566 MHz
x2 518-606 MHz
x3 558-678 MHz
x4 630-750 MHz
x5 700-822 MHz
6 770-870 MHz
EXAMPLE: MTH300 B4 is color matt black, and 630-730 MHz
frequency range
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy
tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
PTT301
Push to talk ring
PTT301 ring fits between microphone body
and capsule and enables PTT functions on
MIC. It is available in a slim (1 cm height)
version, or with a 5 cm body (PTT305) to
allow usage of foam windshield.
Thanks to this button and our patented
technology you can use your wireless
Mic to router your audio feed.
SRE300
Adapter ring
for third party Mic head
SRE300 is a slim aesthetical mechanical
& electronic adapter that allows using
third party microphone heads with
newest Wisycom handheld transmitters
MTH30x.
SRE301
Adapter ring
for third party Mic head
SRE301 is a slim aesthetical mechanical
& electronic adapter that allows using
third party microphone heads with
newest Wisycom handheld transmitters
MTH30x.
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy
tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
MCM301 Premium Head with
MCM303 custom Schoeps capsule
Main Features
Custom Schoeps capsule
Oustanding tonal performances
Very smooth frequency response
Unbeatable pop suppression, thanks to a special anti-pop
filter design
MCM301 has a cardiod polar pattern (hypercardioid for
MCM303), optimized for rejection on rear-incident sound
Frameless pop filter with stainless-steel micro-mesh
Equivalent Noise DIN/IEC 651  30 dB-A (CCIR 468-3 41 dB)
Max SPL with less 0.5% THD  150 dB
Weight 195 g – Doubled gold contacts for audio signal
Ideal choice for speech and vocalist. Thanks to its custom Schoeps capsule, MCM301 head
(cardioid) delivers outstanding tonal performances: its frequency response is very smooth
on full 40-20kHz range. Moreover a 2 stages micro-mesh in stainless-steel was especially
designed to achieve unbeatable efficiency in suppressing pop. The polar pattern is a cardiod,
optimized for rejection on rear-incident sound. Also available with hypercardioid polar
pattern for MCM303.
Frequency Response (1m) and polar pattern (MCM301)
50
dB
40
30
0 degree
20
180
degrees
10
0
10
Hz 20
50
100
200
500
1 kHz
2
5
10
20
40
Special anti-pop filter design
idenOuter
Fig.Mesh
1 Display & Setup controls
Stainless steel 0,8mm:
 Mech. Resistance
Middle mesh
Stainless
steel 0,39 mm:
ardioid polar pattern
(MCM303)
 Mech. Resistance
 Pop Dumping
Antipop micro-Mesh
Stainless steel 30 µm:
 Pop Dumping
 FRAMELESS construction
to avoid reflections
Custom Schoeps Capsule:
 Cardioid/Hypercardioid pattern
Inner
Microporus Foam:
 Pop dumping
 Dust protection
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy
tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
MCM302 Premium Head with
MCM304 Milab capsule (VM44 type)
Main Features
Milab VM44 capsule
Oustanding tonal performances
Very smooth frequency response
Unbeatable pop suppression, thanks to a special
anti-pop filter design
MCM302 has a cardioid polar pattern (omnidirectional for
MCM304), optimized for rejection on rear-incident sound
Frameless pop filter with stainless-steel micro-mesh
Equivalent Noise DIN/IEC 651  30 dB-A (CCIR 468-3 41 dB)
Max SPL with less 0.5% THD
 150 dB
Weight 195 g – Doubled gold contacts for audio signal
The ideal choice for speech and vocalist. Thanks to its custom Milab capsule, MCM302 head
(cardioid) delivers outstanding tonal performances: its frequency response is very smooth
on full 40-20kHz range. Moreover a 2 stages micro-mesh in stainless-steel was especially
designed to achieve unbeatable efficiency in suppressing pop. The polar pattern is a cardiod,
optimized for rejection on rear-incident sound. Also available with omnidirectional polar
pattern (MCM304).
Frequency Response (1m) and polar pattern (MCM302)
idenSpecial
Fig. 1 Display
& Setupfilter
controlsdesign
anti-pop
Outer Mesh
Stainless steel 0,8mm:
ardioid
polar
 Mech.
Resistance
pattern (MCM303)
Middle mesh
Stainless steel 0,39 mm:
 Mech. Resistance
 Pop Dumping
Antipop micro-Mesh
Stainless steel 30 µm:
 Pop Dumping
 FRAMELESS construction to
avoid reflections
VM44 Milab Capsule:
 Cardioid/Hypercardioid pattern
Inner
Microporus Foam:
 Pop dumping
 Dust protection
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy
tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
MTP30
Ultra-lite Wireless Professional Transmitter
-D option for DPA microdot connector
-L option for LEMO connector
Main Features
Up to 122 MHz bandwidth in 470/870 MHz range
Enhanced robustness against inter-modulation and antenna
performances:
 RF part with pass-band filter and circulator (option)
Miniature design with flexible pcb (no connectors)
for extended reliability
Ultra-light metal alloy body (80g without batteries)
ENR compander system
Battery:
- 2 AA Alkaline or rechargeable NiMH
Autonomy:
> 10h @ 50mW output power
> 14h @ 10mW output power
Infrared interface for management and firmware update
Easy and quick to setup thru an Oled display gain/freq button and a
joggle selector
Extended regulation on Mic input gain: 80dB in 2dB step
Max input level 26dBu (15.5 V clipping) to connect directly to mixers
and instruments
General Description
“MTP30 is an extremely small and light pocket
transmitter especially designed for professional
wireless microphone applications”
Very easy and quick to use thanks to OLED display and
gain/freq button and an easy joggle selector.
MTP30 benefits also of the latest Wisycom RF technology
along with an enhanced robustness against noise and intermodulation.
Before putting the device into operation,
please observe the respective countryspecific regulations
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy
tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
MTP30
Ultra-lite Wireless Professional Transmitter
TECHNICAL SPECIFICATIONS
1
Switchable channels 320 allocated by 8 groups of 40 channels (in the 470 ÷ 870 MHz range), quickly selectable with dedicated buttons
2
Switching window
Up to 122 MHz, depending on band (see below code table)
3
Frequencies
Quartz PLL frequency synthesizer circuit (25 kHz step)
Frequency stability
▪ ± 2,5 pap (in the rated temperature range)
▪ ± 2.5 kHz (in the rated temperature range)
Temperature range
-10 ÷ +55 °C
Max RF power
▪ 50 mW (ERP) when high power selected
▪ 10 mW (ERP) when low power selected
Spurious emissions
< 2 nW
Modulation
wideband FM, with 50 µs pre-emphasis
Nominal deviation
±40 kHz (Peak deviation = ±56 kHz)
Telemetry feature
MTP30 transmits also a digitally modulated sub-carrier, suitable for:
▪ tone-squelch operating
▪ remote battery monitoring
▪ optional PTT (push to talk) operation
AF input connector
LEMO option
Configurable on „mic‟ display menu in 3 options:
▪ ’2 wires’:
 gain selectable -40 ÷ +40, no bias voltage
▪ ‘2 wires + bias’:  gain selectable -20 ÷ +40, 5.5 V bias voltage (4k7 internal resistance)
▪ ‘3 wires + bias’:  gain selectable -20 ÷ +40, 5.5 V bias voltage (4k7 internal resistance)
AF input level
80 dB adjustable range from -60 dBu (775 uV) to 20 dBu (7.75 V) at nominal deviation (1 kHz), adjustable in 2 dB steps
Max. input level
+26 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
Noise-Reduction
ENR (Wisycom Extended-NR), with independent Attack-time and Recovery-time
AF bandwidth
▪ 45 Hz ÷ 21 KHz (3dB)
▪ 55 Hz ÷ 20 KHz (1dB)
Distortion
< 0.3 % (0.15 % typ.)
Signal-to-noise ratio
▪ typ. 115 dB (A)rms with 40 kHz deviation
▪ typ. 121 dB (A)rms with 56 kHz deviation
Led
Led indication with bicolor led (red & green) on wireless power switch:
▪ Wireless transmission status: GREEN on/off
▪ Battery lifetime status: GREEN - steady (> 25%)
- slowly blinking (< 25%) - quickly blinking (<12%)
▪ Modulation peek (if activated): RED
▪ Ptt status: RED if active
Display
High contrast OLED (Organic light-emitting diode) bicolor display (96 x 36 pixels)
8 step battery lifetime indication: 7 bars (100%-87%-75%-63-50%-38%-25%) and “empty bar” quickly blinking (12%
remaining)
PTT function
Pin 3 of the AF connector can be setup to an external push button
Power supply
2 AA size batteries (Alkaline, rechargeable NiMH)
Battery life
(2 AA alkaline)
▪ approx. 10 hours @ 50mW continuous working
▪ approx. 14 hours @ 10mW continuous working
Dimensions
73 x 61 x 17.5 mm (Height-Width-Depth) without clip
Weight
Approx 80 g. without batteries
OPTION CODE MTP30-X-Y-Z:
▪ AUDIO CONNECTOR (-X)
L 3 PIN LEMO CONNECTOR
(use FVB.00.003.NLN on Mic)
▪ COLOR (-Y)
C body color "champagne"
B body color "matt black"
▪ FREQ. RANGE (-Z)
x1 470-566 MHz
x2 518-606 MHz
x3 558-678 MHz
x4 630-750 MHz
x5 700-822 MHz
6 770-870 MHz
EXAMPLE: MTP30 LB4 is 3 pin LEMO connector, color matt black,
and 630-730 MHz frequency range
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy
tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
ABN00
Active
Groundplane Antenna
AGN00
Groundplane Antenna
The
AGN00/ABN000
are
groundplane, vertical polarization
omnidirectional antenna.
It comes already pre-tuned in the
same frequency switching-window
of
the
relevant
wirelessmicrophone system.
The antenna is provided with a
plug, suitable to assure its easy
and strong mounting directly on a tripod stand or other support with standard
3/8” screw. If necessary, the antenna can be also hanged (upside-down) over
the shooting set. For the easy packaging of the antenna, its four elements can
be unscrewed from the base. ABN has also a internal booster to compensate
cables loss and powered with +12VDC on the cable.
TECHNICAL SPECIFICATIONS:
Frequencies :
VHF 130-250 MHz, UHF 470-870 MHz
Polarization :
Vertical.
Radiation
:
Omnidirectional.
Connector
:
N type female
Booster Gain:
ABN] VHF 14.5 dB, UHF 11.5 dB
Powering
:
ABN] +12 V, 120 mA (through the output coax cable).
Body size
:
(diameter) 78 mm max.
Lenght
:
AGN] 90mm, ABN] 258 mm (fixing plug included).
Weight
:
AGN] approx 800g, ABN] approx 1.1 kg.
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy
tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
LBNA UHF WIDEBAND ANTENNA 470-870 MHz
LOW NOISE
RF AMPLIFIER
dB
GAIN
ON/ALARM
MENU/SAVE
LBNA is a wideband UHF antenna LPDA (log periodic dipole Array).
It enhances reception providing approx 6dB gain with a typical beam-width
of 90 degrees.
Antenna Data





Dimension: 319 mm L x 284 mm H x 64 mm H
Material: Epoxy fiberglass (copper – clad)
Finishing: Black matte
Mounting: 5/8” Withworth or 3/8” with adapter
Weight: 500g
Booster Specifications







Frequency
Input/output impedance
Connectors
Gain (max)
OIP3
Gain flatness
Powering
:
:
:
:
:
:
:
 UHF (470  870 MHz).
50 ohm (SWR = < 1:1.5; typ. = 1:1.4).
BNC-female type.
015 dB (typical), selectable in step of 1 dB (+/- button).
+43 dBm (Output 3° order Intercept Point) typical.
 1 dB, in the whole working window.
+12 V, 100mA+100mA  if power input activated.
Typical attenuation of most used coax. cables (for length = 100 m):
Cable type
Diameter
Attenuation @ 400
(mm)
MHz
RG 58 C/U
4.95
32 dB
RG 213 /U
10.3
13 dB
RG 218 /U
22.1
7 dB
Cellflex - ¼” foam
8.8
8.4 dB
dielectric
Attenuation @ 900
MHz
52 dB
22 dB
14 dB
12.8 dB
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy
tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
BAA
BROADBAND ANTENNA AMPLIFIER
LOW NOISE
RF AMPLIFIER
GAIN
ON/ALARM
LOW NOISE
RF AMPLIFIER
MENU/SAVE
GAIN
ON/ALARM
MENU/SAVE
dB
dB
BAA is wideband antenna booster especially designed to allow using long cables with
broadband wireless receiver system working in 470-870 MHz (TV ch 21/70) thanks
to a very high OIP3 of 40 dBm.
Operation
The BAA is powered by the receiver system through the coaxial cable attached to its output
connector, and accordingly the receiver system must have the antenna feeding function.
BEWARE: BAW need 100mA @ 12V to operate and it can feed a further antenna booster
up to 100mA @ 12V.
BAA housing is in ruggedized aluminum, with waterproof sealing (suitable for outdoor
installations):
 2 holes for wall-installation (M4 screw type)
Radiofrequency connectors are BNC-Female type:
 Input connector, to antenna. it is possible to power up a remote booster (up to
100mA). When input power is active, “INPUT DC BIAS” led is on. If there is fault on
remote booster (i.e. a short circuit) then a L appear on left digit of gain display .
 Output connector, to receiver system. BAA is powered thru this connector (100mA
+ 100mA if input powering), if there is a fault (low power) a L appear on right
digit of gain display .
GAIN SETUP
BAW gain can be setup from 0 to 16 dB (typical) using +/- buttons.
A multi-colored (rgb) led will indicate the gain level band and also main alarms.
TECHNICAL SPECIFICATIONS
 Frequency
 Input/output impedance
 Connectors
 Gain (max)
 OIP3
 Gain flatness
 Powering thru coax
 Size (L x H x P)
:
:
:
:
:
:
:
:
 UHF (470  870 MHz)
50 ohm (SWR = < 1:1.5; typ. = 1:1.4).
BNC-female type.
0  15 dB (typical), selectable in step of 1 dB (+/- button)
+43 dBm (Output 3° order Intercept Point) typical.
 1 dB, in the whole working window.
+12 V, 100mA+100mA ( if power input activated).
120mm x 39mm x 24mm
.
Typical attenuation of most used coax. cables (for length = 100 m):
Diameter
Attenuation @ 400
Attenuation @ 900
(mm)
MHz
MHz
4.95
32 dB
52 dB
10.3
13 dB
22 dB
22.1
7 dB
14 dB
Cable type
RG 58 C/U
RG 213 /U
RG 218 /U
Cellflex - ¼” foam
dielectric
8.8
8.4 dB
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy
tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
12.8 dB
Subject to change without notice
BAW
BROADBAND HIGH POWER ANTENNA AMPLIFIER
Powering: 250mA(*)
(*) If powering input
0
3
1
4
1
2
2
1
3
3
2
3
11
2. Powering Input button
1
Output Cable to Rx’s 
OUTPUT
INPUT
50 Ohm
S
RF + DC BIA
Antenna
50
RF + DC
12V 600mA
Use M4 type screws
4
1
2
3
1
5
4
1
2
3
Powering: 600mA + 250mA(*)
(*) If powering input
1
4. Gain setup button (+/-)
BAW is wideband antenna booster especially designed to allow long cables wirings and full broadband wireless
receiver systems. It comes in two versions:
BAW-L working in 470-670 MHz (TV ch 21/45);
BAW-H working in 630-870 MHz (TV ch 41/70).
Operation
The BAW is powered by the receiver system through the coaxial cable attached to its output connector, and
accordingly the receiver system must have the antenna feeding function.
BEWARE: BAW needs 600mA @ 12A to operate and it can feed a further antenna booster up to 250mA @ 12V (in
this case the overall current supplied must be at least 850mA).
BAW housing is in ruggedized aluminum (nickel plated), with waterproof sealing (suitable for outdoor installations):
 4 holes for wall-installation (M4 screw type) 173mm X 60mm.
Radiofrequency connector are N-Female type:
 Input connector (0), powered through antenna. Pushing button (2) it is possible to power up a remote
booster (up to 250mA). When input power is active, “INPUT DC BIAS” led is on. If there is a fault on
remote booster (i.e. a short circuit) then a L appears on the left digit of gain display (3).
 Output connector (5), feeding a receiver system. BAW is powered thru this connector (600mA +
250mA if input powering), if there is a fault and there is not enough power to properly operate then a L
appears on the right digit of gain display (3).
GAIN SETUP
BAW gain can be setup from 0 (relay bypass) to 22 dB (typical) using +/- buttons (4). With a long push (2 sec) +
or – buttons, BAW enters in edit mode: display blinks and with short push it is possible to setup the desired gain.
Once finished a long push either on + or – will exit the edit mode.
BEWARE: to avoid any overload of the receiver system even with very strong RF signals, you must carefully
compensate the loss of the cable (see the chart below) with the gain of the BAW, without exceeding a total gain of
max. 3 dB.
TECHNICAL SPECIFICATIONS
 Frequency
:
 Input/output impedance
 Connectors
 Gain (max)
:
:
:
 OIP3
 Gain flatness
 Powering
:
:
:
 Size (L x H x P)
 Weight
:
:
a window in one of following ranges:
BAW-L  UHF (470  670 MHz)
BAW-H  UHF (630  870 MHz)
50 ohm (SWR = < 1:1.5; typ. = 1:1.4).
N-female type.
0  22dB (typical), selectable in step of 1 dB (+/- button)
 When 0 dB is selected then RF feed is by-passed (relay)
 When BAW is not powered then RF feed is by-passed (relay)
+47 dBm (Input 3° order Intercept Point) typical.
 1 dB, in the whole working window.
+12 V, 600mA + up 250mA (*) (thru output coax. Cable)
(*) if power input activated.
193mm x 80mm x 34mm (173mm x 60mm fasten holes).
650 g approx.
Typical attenuation of most used coax. cables (for length = 100 m):
diameter
attenuation
attenuation
Cable type
mm
@ 400 MHz
@ 900 MHz
RG 58 C/U
4.95
32 dB
52 dB
RG 213 /U
10.3
13 dB
22 dB
RG 218 /U
22.1
7 dB
14 Db
Cellflex - ¼”
8.8
8.4 dB
12.8 Db
foam dielectric
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy
tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
BROADBAND SPLITTERS
SPL 214AW
SPL 218AW
UHF ANTENNA SPLITTER ACTIVE WIDEBAND (2 X 1 IN  4 OUT)
UHF ANTENNA SPLITTER ACTIVE WIDEBAND (2 X 1 IN  8 OUT)
3
Front Panel SPL 214AW and SPL 218W
1
2
AC
DC
A N T E N N A BO O ST E R
Back Panel SPL 214AW
~
SPL214A W
DC-OUT
DC-OUT
700mA MAX
700mA MAX
A NTENNA INPUTS
SPLITTER OUTPUTS
5
4
~
6
A NTENNA INPUTS
SPL218A W
SPLITTER
OUTPUTS
DC-OUT
DC-OUT
700mA MAX
700mA MAX
Back Panel SPL 218AW
1)
2)
ON/OFF SWITCH: Two position button to switch on the splitter (a green LED lights up)
“POWER SOURCE INDICATION”: It indicates active power source, either DC or AC (yellow LED)
3)
“ANTENNA BOOSTER” SWITCH: two switches to activate independently remote antenna booster
power up: +12Vcc / 700mA (a yellow LED indicate booster activity on relative antenna).
Booster circuit is protected by self re-settable fuse.
4)
POWER SUPPLY:
5)
ANTENNA INPUTS: A and B inputs on N-female connector. Input connectors can supply antenna
booster with +12Vcc / 700mA MAX when antenna booster switch is on (see 3.)
6)
ANTENNA OUTPUT: ● SPL214AW  A e B output (4 + 4) BNC-Female.
● SPL218AW  A e B output (8 + 8) BNC-Female.
● VAC IEC C14 chassis plug (fuse protected T2A)
● VDC XLR-4 Male (self-reset fuse protected)
[ +V = pins 2 + 4; -V and ground = pins 1 + 3 ]
TECHNICAL DATA:
 Power supply








Working frequency
Amplifier linearity
Impedance
Input/Output Gain
OIP3
Antenna booster powering
Dimension
Weight
:
:
:
:
:
:
:
:
:
:
AC connector 90÷264Vac / T2A, 47÷63Hz
DC connector 10÷ 16 VDC (with self re-settable fuse)
470  880 MHz
 1 dB (typical).
50 ohm.
+2 dB (typical).
+38 dBm (3rd Order Intercept Point).
+12Vcc / 700mA MAX (for each N-female input connector A & B) .
Standard rack 19” / 1U.
● SPL214AW  3,7 kg
● SPL218AW  3,8 kg.
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy
tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
BROADBAND PROGRAMMABLE COMBINER/MATRIX
MAT243
MAT283
UHF WIDEBAND MATRIX COMBINER (2 X 4 IN  3 OUT COMBINED)
UHF WIDEBAND MATRIX COMBINER (2 X 8 IN  3 OUT COMBINED)
Back Panel MAT243
3
2
1
4
Back Panel MAT283
▪ VAC IEC C14 chassis plug (fuse protected T2A)
▪ VDC XLR-4 Male (self-reset fuse protected) [ +V = pins 2 + 4; -V and ground = pins 1 + 3 ]
1.POWER SUPPLY:
2. EXTERNAL ALARMS:
▪ 8 x GPIO INPUT opto-coupled connected to a common float ground and with a 5V PWR
▪ 3 x GPIO OUTPUT opto-relays normally open (max 80V) with max 100mA sinking NC.
3. ANTENNA OUTPUTS: A and B outputs on N-female connector. Output is combinations of 3 channels, local selected using
front panel switch or remotely with usb or with ethernet (if ethernet option ETH950 is present).
4. ANTENNA INPUTS:
▪ MAT243  A e B diversity input (4 + 4) BNC-Female ([email protected] on 3 active input)
▪ MAT283  A e B diversity input (8 + 8) BNC-Female ([email protected] on 3 active input)
TECHNICAL DATA:
 Power supply
: AC connector 90÷264Vac / T2A, 47÷63Hz
: DC connector 10÷ 16 VDC (self re-set. fuse)
: 470  880 MHz
:  1 dB (typical).
: 50 ohm.
: 2 dB or +9 dB with option 9dB.
: +45 dBm (3rd Order Intercept Point).
: 70 dB (typical)
: +12Vcc / 200mA MAX.
: Standard rack (aluminum) 19” / 1U.
: ▪ MAT243  4,4 kg
▪ MAT283  4,9 kg.
 Working frequency
 Amplifier linearity
 Impedance
 Input/Output Gain
 OIP3
 Input separation
 Antenna booster powering
 Dimension
 Weight
FUNCTIONAL DRAW (example):
STUDIO1
A1
STUDIO3
A2
A3
STAGE
A4
EXT 1
A6
A5
A7
A8
BROADBAND
470 – 870 MHz
B1
B2
STUDIO2
B3
B4
STUDIO4
B5
B6
LOBBY
B7
B8
EXT 2
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy
tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
EXAMPLE OF TRUE BROADBAND INSTALLATION:
Latest Wisycom technology allowed a true broadband distribution, reducing the number or cable and antennas.
BAW allow distribution up to 200/250m of cable in the full 470MHz bandwidth.
Splitter and matrix allow a radiofrequency routing that way that in any control room it is possible to receive any studio
(up 3 at a time).
The matrix (routing) can be setup locally or managed remotely with a ethernet connection.
MRK920 and MRK950 allow a high quality reception and an incredible audio flexibility (digital output, digital
companding, remote monitoring. Your wireless infrastructure is NOW even more robust and flexible than a wired
one!!!
STUDIO 1
KEY FEATURES
TRUE BROADBAND DISTRIBUTION (470 MHz)
 ABSOLUTE IMMUNITY TO INTERMODULATION  +47 dBm OIP3
 HIGH SENSITIVITY RECEIVERS
REGIE AUDIO 1
 BROADBAND RECEIVERS 250 MHz
 MATRIX FULLY CONFIGURABLE
 EACH REGIE WITH EACH STUDIO
 EACH REGIE WITH UP TO 3 STUDIOS
 MATRIX REMOTABLE (ETHERNET/USB)
BAW
WIDEBAND
BOOSTER
OIP3 47dBm
0-22 GAIN
Equalized
STUDIO 2
REMOTE CONTROL
(ETHERNET)
SPL214AW
MAT243A
SPL214AW
MAT243A
SPL214AW
REGIE AUDIO 2
STUDIO 3
SPL214AW
MAT243A
REGIE AUDIO 3
STUDIO 4
SPL214AW
MAT243A
REGIE AUDIO 4
REAL INSTALLATION: CANAL+ HEADQUARTER PARIS (2008)
In this case 8 studios are managed with a remotable matrix and overall are used up to 80 channels.
From studio to regie it is possible to have 400/450m!
This is an extreme case that gives you a clue of the robustness and flexibility of our technology!
AUDIO/MIXER
CONTROL
DISTRIBUTION
ROOM
STUDIO’S
AREA
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy
tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
MCR42
DUAL TRUE DIVERSITY CAMERA RECEIVER
Main Features
Dual True Diversity Receiver
Up to 240 MHz bandwidth
MCR42-L: 470-700 MHz
MCR42-H: 590-822 MHz
DSP digital audio treatment for
multi-compander compatibility
Analogue and digital AES3 outputs
Audio Monitor on 3.5” Jack connector
Infrared interface for programming
and transmitter synchronization
Easy setup and operation thru a OLED display
General Description
MCR42 is dual true diversity receiver
especially designed for broadcaster ENG
application.
It is very easy to use thanks to an OLED
display and 4 front LEDs for continuous
RF power and status indications. MCR42
can work in a 240 MHz bandwidth as
ideal companion for the MTH300 and
MTP30 Wisycom transmitter.
Infrared
interfaces,
digital/analogue
audio outputs and monitor plug make it
the most versatile working instrument to
cope with nowadays difficult frequency
environments.
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy
tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
MTK952/W
DIGITAL STEREO TRANSMITTER
PREVIEW
Main Features
330 MHz switching window: 470-800 MHz
Direct Digital Synthesis of MONO/MPX stereo signal for great
sound and very high stereo separation (70 dB)
Completely programmable Noise Reduction System (compander)
for multivendor compatibility
40bit DSP core for very low delay < 0.7 ms
Power adjustable from 10mW to 1W (/W option)
Programmable peak deviation up to 75 kHz
General Description
MTK952
twin stereo transmitter is designed for professional wireless
monitoring applications. A switching bandwidth of 330 MHz on 2000
memorized channels, a digital mono/mpx stereo synthesis for great stereo
separation (>70 dB), a digital programmable companding for multivendor
compatibility and a power up to 1watt are its main unique features that
give the highest flexibility.
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy
tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy
tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
Wisycom Srl - Via Spin, 156 - I-36060 Romano d‟Ezzelino (VI) - Italy
tel. +39 0424 382605 fax. +39 0424 382733 http:// www.wisycom.com - e-mail: [email protected]
Subject to change without notice
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement