G3R IO 0911
Solid State Relay
G3R-I/O
Compact SSRs for I/O Interface with High
Dielectric Strength Requirements
• High-speed models with optimum input ratings for a variety
of sensors are available.
• Input Modules and Output Modules that have the same
form-factor as the G2R.
• Using a coupler approved by VDE 0884 and assuring an
I/O dielectric strength of 4 kV.
• Incorporating an easy-to-see monitoring indicator.
• Approved by UL, CSA, and TÜV. (“-UTU” models)
Ordering Information
To Order: Select the part number and add the desired coil voltage rating, (e.g., G3R-IAZR1SN-DC5)
■ Input Module
Isolation
Indicator
Response speed
Logic level
Supply voltage
Photocoupler
Yes
—
4 to 32 VDC
Supply current
0.1 to 100 mA
Rated input
voltage
Model
100 to 240 VAC
G3R-IAZR1SN
High-speed
(1 kHz)
5 VDC
G3R-IDZR1SN
Low-speed
(10 Hz)
5 VDC
12 to 24 VDC
G3R-IDZR1SN-1
12 to 24 VDC
■ Output Module
Isolation
Phototriac
Indicator
Yes
Zero cross
function
Yes
Rated output
load
2 A at 100 to 240 VAC
Rated input
voltage
5 to 24 VDC
G3R-OA202SZN
No
Photocoupler
Model
G3R-OA202SLN
—
2 A at 5 to 48 VDC
G3R-ODX02SN
1.5 A at 48 to 200 VDC
G3R-OD201SN
Note: When ordering a UL, CSA and EN (TÜV) approved model, add “-UTU” to the model number as shown below:
Example: G3R-OA202SZN-UTU DC5-24.
■ I/O Indication
I/O module classification and AC/DC use are indicated on the mark
affixed to the top of the product.
Mark indication
AC IN
Mark attached to the top of the product
Specification
Input module, AC input
DC IN
Input module, DC input
AC OUT
Output module, AC output
DC OUT
Output module, DC output
Solid State Relay
G3R-I/O
431
Specifications
■ Ratings (at an Ambient Temperature of 25°C)
Input Module
Input
Model
Rated voltage
Operating voltage
Input current
Must operate
voltage
Must release
voltage
G3R-IAZR1SN
100 to 240 VAC
60 to 264 VAC
15 mA max.
60 VAC max.
20 VAC min.
G3R-IDZR1SN
5 VDC
4 to 6 VDC
8 mA max.
4 VDC max.
1 VDC min.
G3R-IDZR1SN-1
12 to 24 VDC
6.6 to 32 VDC
6.6 VDC max.
3.6 VDC min.
5 VDC
4 to 6 VDC
4 VDC max.
1 VDC min.
12 to 24 VDC
6.6 to 32 VDC
6.6 VDC max.
3.6 VDC min.
Output
Model
Logic level supply voltage
G3R-IAZR1SN
Logic level supply current
4 to 32 VDC
0.1 to 100 mA
G3R-IDZR1SN
G3R-IDZR1SN-1
Output Module
Input
Model
G3R-OA202SZN
Rated voltage
5 to 24 VDC
Operating voltage
4 to 32 VDC
Input current
G3R-OA202SLN
15 mA max.
(at 25°C)
G3R-ODX02SN
8 mA max.
Must operate
voltage
4 VDC max.
Must release
voltage
1 VDC min.
G3R-OD201SN
Output
Model
G3R-OA202SZN
Rated load voltage
100 to 240 VAC
Load voltage range
75 to 264 VAC
Load current (see note)
0.05 to 2 A
Inrush current
30 A (60 Hz, 1 cycle)
G3R-OA202SLN
G3R-ODX02SN
5 to 48 VDC
4 to 60 VDC
0.01 to 2 A
8 A (10 ms)
G3R-OD201SN
48 to 200 VDC
40 to 200 VDC
0.01 to 1.5 A
8 A (10 ms)
Note: The minimum current value is measured at 10°C min.
432
Solid State Relay
G3R-I/O
Characteristics
■ Input Module
Operate time
Item
G3R-IAZR1SN
20 ms max.
G3R-IDZR1SN
0.1 ms max.
Release time
Response frequency
Output ON voltage drop
Leakage current
Insulation resistance
Dielectric strength
20 ms max.
0.1 ms max.
10 Hz
1 kHz
1.6 V max.
5 μA max.
100 MΩ min. between input and output
4,000 VAC, 50/60 Hz for 1 min. between input and output
Vibration resistance
Shock resistance
10 to 55 Hz, 1.5-mm double amplitude
G3R-IDZR1SN-1
15 ms max.
15 ms max.
10 Hz
1,000 m/s2 {approx. 100G}
Operating: -30°C to 80°C (with no icing)
Storage: -30°C to 100°C (with no icing)
UL File No. E64562
CSA File No. LR35535
TÜV File No. R9650094 (EN60950)
Operating: 45% to 85%
Approx. 18 g
Ambient temperature
Approved standards
Ambient humidity
Weight
■ Output Module
Item
Operate time
Release time
Response frequency
G3R-OA202SZN
G3R-OA202SLN
1/2 of load power source cycle + 1 ms max.
1/2 of load power source cycle + 1 ms max.
20 Hz
Output ON voltage drop
Leakage current
Insulation resistance
Dielectric strength
Vibration resistance
1.6 V max.
1.5 mA max.
1 mA max.
100 MΩ min. between input and output
4,000 VAC, 50/60 Hz for 1 min. between input and output
10 to 55 Hz, 1.5-mm double amplitude
Shock resistance
1,000 m/s2 {approx. 100G}
Ambient temperature
Operating: -30°C to 80°C (with no icing)
Storage: -30°C to 100°C (with no icing)
UL File No. E64562
CSA File No. LR35535
TÜV File No. R9650094 (EN60950)
Operating: 45% to 85%
Approx. 18 g
Approved standards
Ambient humidity
Weight
G3R-ODX02SN
1 ms max.
2 ms max.
100 Hz
Solid State Relay
G3R-OA201SN
2.5 V max.
G3R-I/O
433
Engineering Data
Load Current vs. Ambient Temperature
4-point mounting (see note 1)
16-point mounting (see note 2)
1.5
1.4
Single-point
mounting
1
0.7
0.5
2
16-point mounting (see note 2)
1.5
1.4
Single-point
mounting
1
0
20 30 40 55 60
80
−30 −20
100
4-point mounting (see note 1)
1.5
1.1
1
Single-point
mounting
16-point mounting
(see note 2)
0.6
0.5
0.5
−30 −20
G3R-OD201SN(-UTU) (40 to 200 VAC)
4-point mounting (see note 1)
2
Load current (A)
2
Load current (A)
G3R-ODX02SN(-UTU) (4 to 60 VDC)
Load current (A)
G3R-OA202SZN(-UTU)/OA202SLN(-UTU)
Ambient temperature (°C)
0
20
40 55 60
80
100
−30 −20
Ambient temperature (°C)
0
20
40 55 60
80
100
Ambient temperature (°C)
Note: 1. When G730-Z0M04-B is mounted.
2. When G70A-Z0C16 is mounted.
Inrush Current Resistivity
Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.)
G3R-OA202SZN(-UTU)/OA202SLN(-UTU)
G3R-ODX02SN(-UTU)
20
10
10
30 50
100 200
500 1000
5000
10
9
9
8
8
7
6
5
4
3
Solid State Relay
7
6
5
4
3
2
2
1
1
0
Energized time (ms)
434
Inrush current (A)
Inrush current (A)
Inrush current (A)
30
G3R-OD201SN(-UTU)
10
10
30 50
100
300 500
Energized time (ms)
G3R-I/O
1000 2000
0
10
30 50
100
300 500
Energized time (ms)
1000 2000
Dimensions
Unit: mm (inch)
■ G3R
1
Terminal Arrangement/
Internal Connections
(Bottom View)
5.2
3
0.5
29 max.
(+)
4
9.6
1
28 max.
13 max.
(−)
17.4
4.75
5
4.7
0.5 4.75
4
4
Load
5
7.5
3
Input
1
5
(−)
(+)
10
2
20
■ Connecting Sockets
P2RF-05
Five, M3.5×8
G3R I/O Relay
4 dia.
4.2-dia. hole
12
71.5 max.
P2RF-05 Socket
58.5 *
M3 (M3 x16) or
3.2-dia. hole
19.5 max.
30 max.
54 max.
* Indicates a value when using the [email protected]
Supporting Rail.
The value is 67.5 when using the [email protected]
P2RF-05-E
G3R I/O Relay
59 max.
48 max.
M3.5 screw
PFRF-05-E
Socket
3.2-dia. hole
3.5-dia.
hole
62.5 **
(66.5)***
85.5 max.
M3 or 3.5-dia. hole
61 max.
P2R-05A
** Indicates a value when using the [email protected]
Supporting Rail with the P2RF-05-E
The value is 71.5 when using the [email protected]
*** Indicates a value when using the [email protected]
Supporting Rail with the P2RF-08-E
The value is 75.5 when using the [email protected]
14.5 max.
G3R I/O Relay
35.5 max.
P2R-05A Socket
Five, 3x1.5-dia. hole
36 max.
(Panel thickness must
be 1.6 to 2.0 mm.)
(For use when mounting in a panel or in
the P2R-P mounting plate )
Solid State Relay
G3R-I/O
435
14.5 max.
P2R-05P
Five, 1.6-dia. hole
G3R I/O Relay
35.5 max.
P2R-05P Socket
36 max.
Dimensional tolerance is ±0.1.
14 max.
Five, 1.6-dia. hole
P2R-057P
G3R I/O Relay
32 max.
P2R-057P Socket
41 max.
■ Socket Mounting Plate
Use the P2R-P Socket Mounting Plate when arranging several P2R-05A Sockets in a row.
P2R-P
R2.25
10 ellipses
Square hole
■ Approvals
UL Recognized (File No. E64562) / CSA Certified (File No. LR35535)
Model G3RIAZR1SN
Module type
Input
Rating
100 to 240 VAC
IDZR1SN
Input
5 VDC, 12 to 24 VDC
IDZR1SN-1
Input
5 VDC, 12 to 24 VDC
OA202SZN
Output
5 to 24 VDC
OA202SLN
Output
5 to 24 VDC
ODX02SN
Output
5 to 24 VDC
OD201SN
Output
5 to 24 VDC
Model G3RIAZR1SN
Module type
Input
Output rating
32 VDC, 100 mA (General Purpose)
IDZR1SN
Input
32 VDC, 100 mA (General Purpose)
IDZR1SN-1
Input
32 VDC, 100 mA (General Purpose)
OA202SZN
Output
264 VAC, 2 A (General Purpose)
264 VAC, 1 A (Tungsten)
264 VAC, 1 A FLA, 6 A LRA
OA202SLN
Output
264 VAC, 2 A (General Purpose)
264 VAC, 1 A (Tungsten)
264 VAC, 1 A FLA, 6 A LRA
ODX02SN
Output
60 VDC, 2 A (General Purpose)
OD201SN
Output
200 VDC, 1.5 A (General Purpose)
60 VDC, 1 A (Tungsten)
200 VDC, 0.75 A (Tungsten)
436
Solid State Relay
G3R-I/O
Precautions
■ Connection
■ Protective element
With the SSR for DC switching, the load can be connected to either
positive or negative output terminal of the SSR.
Since the SSR does not incorporate an overvoltage absorption component, be sure to connect an overvoltage absorption component
when using the SSR under an inductive load.
■ Precaution of Mounting Output Modules
With up to four G3R SSRs mounted closely and
side by side, 2-A loads can be switched.
G3R
G3R
With a G3R SSRs mounted every other slot,
2-A loads can be switched.
G3R
Solid State Relay
G3R-I/O
437
All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which
can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
Global - http://www.omron.com
USA - http://www.components.omron.com
847-882-2288
Cat. No. X301-E-1b
Solid State Relay
09/11
G3R-I/O
Specifications subject to change without notice
Printed in USA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement