IDIS DA-MA2000 Installation manual
Advertisement
Advertisement
DA-MA2000 INSTALLATION MANUAL
This manual is intended for users of the DA-MA2000 mounting bracket. It includes instructions for mounting DA-MA2000 to DA-CM2050 or DA-WM2050.
• This bracket is intended to be used with a specific model of camera.
Do not use it with other models of cameras except for those approved by the dealer or distributor.
• This installation should be performed by a qualified service personnel in conformance to all local codes.
• You may need to reinforce the ceiling. If the ceiling is not strong enough to support the camera, the camera may fall.
• Do not use this product for other purposes.
Mounting
Mount the bracket to the ceiling pipe(DA-CM2050) or wall mounting bracket(DA-WM2050) as follows:
Wall Mounting Bracket
(DA-WM2050)
Bracket
Screw Set M8X8, 2EA
Ceiling Pipe
(DA-CM2050)
Cable
Bracket
1 Insert cables from external devices, network and power adapter into bracket.
2 Assemble bracket into the ceiling pipe(DA-CM2050) or wall mounting bracket(DA-WM2050) and fix it by using the screws. The ceiling pipe and wall mounting bracket are sold separately.
Connect your camera to the bracket as follows:
3 Screw the camera body onto bracket.
4 Screw the camera dome cover onto the camera body.
5 Turn on power.
Dimensions
Bracket
Camera
Body
Camera
Body
Camera
Dome
Cover
Unit: mm (inch)
19 (0.75)
56.3 (2.22)
13 (0.51)
IDIS Co., Ltd.
For more information, please visit www.idisglobal.com
Ver.1.0

Public link updated
The public link to your chat has been updated.
Advertisement