RS-232/CAN low speed fault tolerant converter I-7530-FT I-7530-FT is a RS-232/CAN low speed fault tolerant converter and can accurately convert messages between CAN and RS-232 communication media. It can resist more noise in harsh environment, and even access CAN messages with single line of CAN bus. In order to use the CAN network with traditional programmable RS-232 devices, we provide an easy way to achieve this purpose by several of user function call. It can be used in the application of CAN bus monitoring, building automation, remote data acquisition, environment control and monitoring, laboratory equipment & research, factory automation, etc. Utility tool for transmitting / receiving CAN messages Microprocessor inside with 20MHz Built-in CAN/RS-232 converter firmware Fully compatible with ISO 11898-3 standard Max transmission speed up to 125 kbps for CAN and 115.2 kbps for RS-232 Support both CAN 2.0A and CAN 2.0B CAN Monitor & Data log Tools Show CAN messages by hex or decimal format CAN messages with timestamp Easy-to-use data logger for the diagnosis of the CAN networks and recording of the received data Send the predefined CAN messages manually or cyclically Build-in RS-232/CAN FIFO buffers Power, data flow and error indicator for CAN and RS-232 Hardware watchdog design Utility Features Wire Assignments CAN bus baud rate configuration CAN acceptance filter configuration CAN 2.0A or 2.0B specific selection Serial COM baud rate and data bit setting Serial COM command error response selection 1-11 CAN Interface Controller Transceiver Channel number Connector Baud Rate (bps) Terminator Resistor Specification Receive Buffer Microprocessor inside with 20MHz AMIS 41682 1 9-pin male D-Sub (CAN_L, CAN_SHLD, CAN_H, N/A for others) 10 k, 20 k, 50 k, 125 kbps 1 kΩ for CAN_H and CAN_L ISO-11898-3, CAN 2.0A and CAN 2.0B 1000 data frames UART Interface COM COM Connector Baud Rate (bps) Data bit Stop bit Parity Receive Buffer RS-232 9-pin female D-Sub (DCE: TxD, RxD, GND, N/A for others ) 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps 5, 6, 7, 8 1, 2 None, Even, Odd 900 data frames LED Round LED ON LED: Power and Data Flow; ERR LED: Error Power Protection Power Consumption Power reverse polarity protection, Over-voltage brown-out protection 1W Mechanism Installation Dimensions DIN-Rail 118mm x 72mm x 33mm Environment Operating Temp. Storage Temp. Humidity -25 ~ 75 ℃ -40 ~ 80 ℃ 5 ~ 95% RH, non-condensing Applications Ordering Information I-7530-FT-G Intelligent RS-232/CAN low speed fault tolerant converter I-7530-FT-G CR Intelligent RS-232/CAN low speed fault tolerant converter (RoHS) 1-12
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021