BCD905SS 90 cm Single cavity dual fuel cooker y

BCD905SS 90 cm Single cavity dual fuel cooker y
BCD905SS
90 cm Single cavity
dual fuel cooker
y
1
User Manual for your Baumatic
BCD905SS
90 cm Single cavity dual fuel cooker
NOTE: This User Instruction Manual contains important
information, including safety & installation points, which will
enable you to get the most out of your appliance. Please keep it
in a safe place so that it is easily available for future reference; for
you or any person not familiar with the operation of the appliance.
GS 07/10/13
2
Contents
Environmental note
Important safety information
4
5–8
Specifications
Dimensions
Specifications
Electrical details
Gas details
Control panel
Timer (Minute minder)
9 – 11
9
9 - 10
10
10
11
12
Using the hob top
Hob surface layout
Before first use
Lighting a burner
Optimum use of the burners
Hob guidelines
12 - 14
12
12
13
13
14
Using the oven
Before first use
Using the main oven
Cooking functions
Using the grill
Cooking guidelines
Warnings
Cooking guide for the main oven
Cooking tips for cakes and bread
Cooking tips for meat
14 - 21
14 - 15
15
16
17
17
18
18 - 19
20
21
Cleaning and maintenance
Cleaning the gas hob top
After each use
Cleaning the burners
Cleaning the oven
Replacing the oven bulb
Removing the oven door for cleaning
Removing the inner door glass for cleaning
Removing the side racks for cleaning
21 – 25
22
22
23
23
24
24
25
25
Installation
Positioning
Ventilation requirements
Securing the back-guard
Fitting the safety chain and hook
Electrical connection
Connecting the main supply cable
Gas connection
Gas safety (installation and use) regulations
Gas connection
Gas conversion to LPG
Minimum flow adjustment for hob gas taps
Gas tap replacement
26
26
28
29
29
31
31
32
33
33
34
35
36
My appliance isn’t working correctly
37 – 39
Baumatic consumables
40
Contact details
41
3
- 37
- 27
- 29
- 30
- 32
-
34
35
36
37
Environmental note
o The packaging materials that Baumatic uses are environmentally
friendly and can be recycled.
o Please discard all packaging material with due regard for the
environment.
4
Important safety information
Your safety is of the utmost importance to Baumatic. Please
make sure that you read this instruction booklet before
attempting to install or use the appliance. If you are unsure
of any of the information contained in this booklet, please
contact the Baumatic Advice Line.
General Information
o This appliance is designed for domestic household use and for the
cooking of domestic foodstuffs.
o IMPORTANT: The adjacent furniture and all materials used in the
installation must be able to withstand a minimum temperature of
85°C above the ambient temperature of the room it is located in,
whilst in use.
o Certain types of vinyl or laminate kitchen furniture are particularly
prone to heat damage or discolouration at temperatures below the
guidelines given above.
o Any damage caused by the appliance being installed in
contravention of this temperature limit, or by placing adjacent
cabinet materials closer than 25 mm to the appliance, will be the
liability of the owner.
o IMPORTANT: Baumatic Ltd. DO NOT recommend that this
appliance is installed on any type of marine vessel.
o The use of this appliance for any other purpose or in any other
environment without the express agreement of Baumatic Ltd. will
invalidate any warranty or liability claim.
o Your new appliance is guaranteed against electrical or mechanical
defects, subject to certain exclusions that are noted in Baumatic’s
Conditions Of Guarantee. The foregoing does not affect your
statutory rights.
o Repairs may only be carried out by Baumatic service
engineers or their authorised service agents.
Warning and safety instructions
o This appliance complies with all current European safety legislation.
Baumatic do wish to emphasise that this compliance does not
remove the fact that the appliance surfaces will become hot
during use and retain heat after operation.
5
o This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Child Safety
o Baumatic strongly recommend that babies and young children are
prevented from being near to the appliance and not allowed to
touch the appliance at any time. During and after use, all surfaces
will become hot.
o If it is necessary for younger family members to be in the kitchen,
please ensure that they are kept under close supervision at all
times.
General Safety
Make sure that you understand the controls before using the
appliance.
Check that all of the controls on the appliance are turned off after
use.
Always stand back when opening the oven door, this will allow
heat to disperse.
Take care when removing items from the oven, as the contents
may be hot.
Always keep the oven doors closed when the oven is not in use.
Always follow the basic principles of food handling and hygiene; this
will prevent the possibility of bacterial growth.
Always keep ventilation slots clear of obstructions.
Keep fingers away from the hinge areas when closing the door,
otherwise you may trap them.
Oven gloves should be used when placing food in the oven cavity
and when removing it. Care should be taken to avoid direct contact
with any of the elements in the appliance.
o DO NOT LEAVE THE APPLIANCE UNATTENDED WHILST IN
USE.
6
o Do not place heavy objects on the oven door or lean on the oven
door when it is open, as this can cause damage to the oven door
hinges. Nobody should be allowed to sit or stand on any part of the
cooker.
o Do not store chemicals, food stuffs, pressurised containers in or on
the cooker or in cabinets immediately above or next to the cooker.
o Do not heat up unopened food containers, as pressure can build up
which may cause the container to burst.
o Do not place flammable or plastic items on or near the hob
burners, these types of materials should also not be placed in the
oven or the compartment below the oven.
o Do not leave heated oil or fat unattended, as this is a fire risk. You
should not fill a deep fat frying pan more than one third full of fat or
oil; you should also not use a lid.
o Do not allow fat or oil to build up in the oven trays, grill pan or
oven base.
o Do not place pans or baking trays directly on the base of the oven
cavity, or line it with aluminium foil.
o Do not grill food containing fat without using a grill trivet. The grill
trivet should never be covered with aluminium foil.
o Do not place hot parts in water, leave them to cool first.
o Do not allow vinegar, coffee, milk, saltwater, lemon, tomato juice
or any liquid with high sugar content to remain in contact with the
enamel parts of the appliance. Spillages should be wiped up
immediately.
o Do not allow electrical fittings or cables to come into contact with
areas on the appliance that get hot.
o Do not use the appliance to heat the room it is located in or to dry
clothing. No clothing should be placed over or near to the hob
burners or oven door.
o Do not install the appliance next to curtains or soft furnishings.
o Do not attempt to lift or move cooking appliances by using the
oven door or handle, as this may cause damage to the appliance or
result in injury to the person lifting the appliance.
7
Cleaning
o Cleaning of the oven should be carried out on a regular basis.
o Great care should be taken whilst using this appliance and when
following the cleaning procedure.
o IMPORTANT: The appliance must be disconnected from the mains
before following the cleaning procedure.
o IMPORTANT: Care must be taken when cleaning between the
door glasses, and inside the inner frame as some of the
edges maybe sharp due to the manufacturing process.
Installation
This appliance must be correctly installed by a suitably
qualified person, strictly in accordance with the
manufacturer’s instructions. Please see the specific
section of this booklet that refers to installation.
o Baumatic Ltd. declines any responsibility for injury or
damage, to person or property, as a result of improper use
or installation of this appliance.
o Heat, steam and moisture will be created during use of the
appliance, take care to avoid injury and ensure that the room is
adequately ventilated. If the appliance is going to be used for
prolonged periods of time, then additional ventilation may be
required.
o Please consult with your qualified installer if you are in any doubt
about the amount of ventilation that you will require.
Declaration of conformity
This appliance complies with the following European Directives:
2006/95/EC regarding “low voltage”
2004/108/EC regarding “electromagnetic disturbances”
-89/109/EEC regarding “materials in contact with food”.
o The above directives comply with 93/68/EEC regarding CE marking.
o The manufacturer declares that the oven is built using certified
materials and requires the appliance to be installed in accordance
with the standards currently in force. This appliance must be used
by a trained person for domestic purposes only.
8
Specifications
Height = 885 - 940 mm
Width = 900 mm
Depth = 600 mm
Product specifications:
o
o
o
o
o
5 zone gas hob:
1 x 3.80 kW triple crown wok burner
1 x 3.00 kW rapid burner
2 x 1.80 kW semi-rapid burners
1 x 1.00 kW auxiliary burner
o Flame failure safety device on each burner
o Automatic ignition
o Heavy duty cast iron pan stands
o
o
o
o
o
o
o
Energy efficiency class: A
Minute Minder
Thermostatically controlled grill
Double-glazed removable door
Removable full inner glass
WipeClean enamelled cavity
Adjustable feet
9
Multifunction oven
o 8 functions
o Net oven capacity: 85 litres
o Gross oven capacity: 112 litres
Standard accessories:
o Trivet
o WipeClean enamelled baking tray with handle
o 2 x Safety shelves
o Removable side racks
o LPG conversion jets
o Wok stand
Optional extras:
o BPS2 Pizza Stone
Electrical details
Rated Voltage:
Supply Connection:
Max Rated Inputs:
Mains Supply Lead:
Oven Light Bulb:
230 Vac 50 Hz
20 A (double pole switched fused
outlet with 3mm contact gap)
3.20 kW
3 core x 1.5 mm² (not supplied)
E14 15 W/300°C screw type pygmy
Gas details
Gas Connection Type:
Gas Type (Natural Gas):
1/2” BSP
20 mbar
For future reference please record the following information which can
be found on the rating plate and the date of purchase which can be
found on your sales invoice. The rating plate for your oven can be
located by opening the door of the storage compartment.
Model Number
……………………………….
Serial Number
……………………………….
Date of Purchase
……………………………….
10
Control Panel
Cooking zone selection dial
o Turn the relevant dial anticlockwise to select a power level for a
chosen burner.
0 = Burner OFF position
– Low temperature
– High temperature
Main oven thermostat dial
o Turn the dial clockwise to select a main
oven temperature (50 °C –
225 °C MAX).
Main oven function selection dial
o Rotate the dial to select a function for
the main oven.
Analogue Thermometer
o The control panel has an analog
thermostat
which
displays
the
approximate internal temperature of the
main oven.
11
The timer (minute-minder)
o To set a cooking time, first wind the
timer up by turning it completely once
from left to right and then back to the
number of minutes you require the
timer to be set for.
o The timer will sound when the set time
has been reached.
Using the hob top
Hob surface layout
2)
3)
4)
6)
3.00
1.80
1.00
3.80
kW
kW
kW
kW
rapid burner
semi-rapid burners
auxiliary burner
triple crown (wok) burner
Before first use
IMPORTANT: You should clean the hob surface (see
“Cleaning and maintenance” section).
o You should switch on one cooking zone at a time, for 5 minutes
at the maximum setting. This will help to eliminate any new
smell that exists and evaporate any humidity that has formed on
the heating elements during transit.
o Do not burn off more than one zone at once.
o You must place a saucepan filled half full with cold water on
each zone as you burn it off.
12
Lighting a burner
o Press the relevant burner dial and rotate
anticlockwise to the large flame icon.
Release the dial and the burner will
automatically ignite.
o Matches can also be used to light the burner
during a power cut. Simply follow the
previous step but place a lit match to the
burner as you press the dial. Once lit, keep
the dial pressed for about ten seconds.
WARNING: Extra care should be taken when lighting a burner
with matches. There is a risk of burning as the cooking zone
ignites so take necessary precautions.
Optimum use of the burners
o In order to achieve maximum results with the minimum
consumption of gas, it is important to adjust the flame according
to your needs and to use the appropriate size pans (see table
below).
o When the contents of a pan begin to boil it is recommended that
you adjust the dial to the small flame position.
o Always place a lid on the pan in use.
Burner
Diameter of pan (cm)
Triple crown
22 – 24
Rapid
20 – 22
Semi-rapid
16 – 18
Auxiliary
12 - 14
o Always remember to turn the control knob to OFF when cooking
is completed.
o The appliance is equipped with
pan supports (1), on which the
wok support (2) must be
placed. To ensure stability,
position the notch (A) of the
wok support on the pan support
fingers as indicated in the
diagram above.
13
Hob guidelines
o The diameter of the bottom of the pan should correspond to that
of the burner.
o The burner flame must never extend beyond the diameter of the
pan.
o Use flat bottomed pans only
o When possible, keep a lid on the pan whilst cooking.
o Cook vegetables with as little water as possible, to reduce
cooking times.
IMPORTANT: Always place pans centrally over the hob burners and
position them so that the handles cannot get accidentally caught or
knocked off. You should also make sure that the handle is not over one
of the other hob burner flames.
Using the oven
Before first use
o To remove any residue from the oven that may have been left
from the manufacturing process, you should select the
conventional oven function and turn the thermostat dial to its
maximum temperature setting.
o It is perfectly normal for a smell to be produced during this
process.
o You should make sure that any windows in the room are left
open during this process.
o It is advisable for you not to remain in the room whilst the
burning off process is taking place.
o You should leave each oven on maximum setting for 30 – 40
minutes.
14
o After the cavity has cooled, it should then be cleaned with warm
soapy water, using either a sponge or soft cloth. No abrasive
cleaners should be used.
o Outer parts of the oven should be cleaned with warm soapy
water, using either a sponge or soft cloth. No abrasive cleaners
should be used.
o We would recommend that an appropriate stainless steel cleaner
and polish is regularly used on the stainless steel surfaces of this
appliance.
Using the main oven
You can rotate this dial in either
direction to select an oven function for
the oven.
The oven temperature control knob
should be turned clockwise to select the
oven temperature.
15
There are eight cooking functions available on your appliance:
LIGHT CONTROL: Turn the control knob to this icon to turn
the oven light on and off.
DEFROST MODE: The fan runs without heat to reduce the
defrosting time of frozen foods. The time required to defrost
the food will depend on the room temperature, the quantity
and type of food. Always check food packaging for the defrosting
instructions.
FAN OVEN: This method of cooking uses the top and
bottom heating elements with the fan. This results in the
heat being evenly distributed in the cavity to cook food
simultaneously on different shelves and also prevents the transmission
of smells and tastes from one dish to another.
CONVENTIONAL OVEN: This method of cooking provides
traditional cooking, with heat from the top and lower
elements. This function is suitable for roasting and baking on
one shelf only.
GRILL WITH FAN: This cooking method uses the top
element in conjunction with the fan, to help give a fast
circulation of heat. Suitable where quick browning is required
and “sealing” the juices in, such as with steaks, hamburgers, some
vegetables etc.
CENTRE GRILL: This cooking method is normal grilling,
utilising the inner part only of the top element, which directs
heat downwards onto the food. Suitable for grilling small
portions of bacon, toast, meat etc.
BOTTOM HEATING ELEMENT AND FAN: This function uses
the bottom heating element and the fan to distribute the
heat. It is suitable for defrosting and warming up ready-made
meals.
CIRCULAR HEATING ELEMENT AND FAN: This function
turns on the back heating unit and the fan to distribute the
heat. This combination allows for a fast and even cooking of
several different foods placed on the various shelf levels.
16
Using the grill
The control knobs should be used to select the
grill function and temperature that you require.
We recommend that you preheat the grill for
five minutes before putting food into the grill.
IMPORTANT: The oven door must be closed
when using the grill function.
REMEMBER: When using any of the grill
functions, it is important to place a drip pan at
the base of the oven cavity to collect any juices
which may drip down (see image on next
page).
The oven walls of the two cavities are
fitted with various guide bars on which
you can place an oven shelf or a drip
tray (see image below).
Cooking guidelines
o Please refer to the information given on food packaging for
guidance on cooking temperatures and times. Once familiar with
the performance of your appliance, temperatures and times can be
varied to suit personal preference.
o Make sure that frozen foods are thoroughly thawed before cooking,
unless the instructions on the food packaging advise that you can
“cook from frozen”.
o You should pre-heat the oven and not place food inside of it is
properly heated.
o Before cooking, check that any unused accessories are removed
from the oven.
o Place cooking trays in the centre of the oven and leave gaps
between the trays to allow air to circulate.
o Try to open the door as little as possible to view the dishes.
17
Warnings
o Keep the oven door closed when using either the grill or oven
functions.
o During cooking, never place pans or cookware directly onto the
bottom of the oven. They should always be placed on the shelves
provided.
o The grill heating element becomes extremely hot during operation,
avoid touching it inadvertently when handling the food which you
are grilling.
o Important: Be careful when opening the door, to avoid contact
with hot parts and steam.
o IMPORTANT: In case of fire, close the main valve of the gas
supply and switch off the electricity supply to the appliance. NEVER
pour water onto burning oil.
For a general cooking guide please see the tables below.
Cooking guide for the main oven
Multifunction oven:
Foods
Weight
(kg)
Meat
Roast veal
Roast beef
Roast pork
Roast lamb
Game
Roast hare
Roast
pheasant
Roast
partridge
Poultry
Roast
chicken
Roast
turkey
Roast duck
Fish
Roast fish
Casserole
fish
Shelf position from bottom
With 5 With 4 With
runners runners three
runners
Cooking without fan
Temperature Cooking
(°C)
time in
mins
Cooking with fan
Temperature Cooking
(°C)
time in
mins
1
1
1
1
1-2
1-2
1-2
1-2
1-2
1-2
1-2
1-2
2
1
2
1
200-225
200-225
200-225
200-225
100-120
40-50
100-120
100-120
190
190
190
190
100-120
40-50
100-120
100-120
1
1
1-2
1-2
1-2
1-2
2
2
200-MAX
200-MAX
50-60
60-70
200-MAX
200-MAX
50
60
1
1-2
1-2
2
200-MAX
50-60
200-MAX
50
1
1-2
1-2
2
200-225
80-90
190
70-80
1
1-2
1-2
2
200-225
100-120
190
90-110
1
1-2
1-2
2
200-225
90-110
190
80-100
1
1
2-3
2-3
2
2
1
1
200
175
30-35
20-25
170-190
160-170
25-30
15-20
18
Baked pasta
Lasagne
Cannelloni
Pizza
Bread
Pastries
Biscuits in
general
Shortcrust
pastry
Victoria
sponge
Cakes
Angel cake
Fruit cake
Chocolate
cake
2.5
2.5
1
1
3
3
3
3
2
2
2
2
1
1
1
1
210-225
210-225
225-MAX
225-MAX
60-75
60-75
25-30
20-25
225-MAX
225-MAX
225-MAX
220
30-40
30-40
20-25
20
2
2
1
190
15
170-190
15
2
2
1
200
20
190-200
20
0.8
2
2
1
200
40-45
190-200
40-45
0.8
0.8
0.8
2
2
2
2
2
2
2
2
2
190
200
200
52
65
45
170-190
190-200
190-200
45
65
45
The information in this table is approximate and may vary
according to individual needs.
Grilling:
Shelf position from bottom
Foods
Meat
Chop
Beef
Steaks
Half
chicken
(0.5kg
each
half)
Fish
Trout
Sole
Bread
Toast
Weight
(kg)
With 5
runners
With 4
runners
With 3
runners
Cooking without fan
Cooking
time in
Temperature
mins
(°C)
2nd
1st
side side
0.50
3
3
2
225-MAX
0.15
3-4
3
1-2
1
3-4
2-3
1-2
0.42
0.20
200-225
1215
5
1215
5
225
20
20
4
4
3
3
2-3
2-3
225-MAX
225-MAX
4-5
3-4
3
225-MAX
2-3
2-3
Cooking with fan
Cooking
time in
Temperature
mins
(°C)
2nd
1st
side side
200
15
Depends
on
thickness and
personal taste
Depends
on
thickness
and
personal
taste
200
200
10
7
10
7
200
2-3
2-3
The information in this table is approximate and may vary
according to individual needs.
19
10
Cooking tips for cakes and bread
o Heat the oven for at least 15 minutes before you start cooking
bread or cakes.
o Do not open the door during baking because the cold air will stop
the yeast from rising.
o When the cake is cooked turn the oven off and leave it in for about
10 minutes.
o Do not use the enamelled baking tray or drip pan to cook cakes in.
o To test if a cake is cooked, about 5 minutes before the end of
cooking time, put a cake tester or skewer in the highest part of the
cake. If it comes out clean, the cake is cooked.
o If the cake sinks, next time use less liquid or lower the temperature
by 10°C.
o If the cake is too dry, make some tiny holes with a toothpick and
pour some drops of fruit juice or spirits on it. The next time,
increase the temperature by 10°C and set a shorter cooking time.
o If the cake is too dark on top next time put the cake on a lower
shelf and cook it at a lower temperature for longer.
o If the top of the cake is burnt, cut off the burnt layer and cover with
sugar or decorate with cream, jam and confectioner’s cream.
o If the cake is too dark underneath next time place it on a higher
shelf and cook it at a lower temperature.
o If the cake or bread is cooked nicely outside but is still uncooked
inside, next time use less liquid and cook at a lower temperature for
longer.
o If the cake will not come out of the tin, slide a knife around the
edges, place a damp cloth over the cake and turn the tin upside
down. Next time, grease the tin well and sprinkle with flour or
bread crumbs.
o If the biscuits will not come away from the baking tray, put the tray
back in the oven for a while and lift the biscuits up before they cool.
The next time use a sheet of baking parchment to prevent this
happening again.
20
Cooking tips for meat
o If, when cooking meat, the time needed is more than 40 minutes,
turn the oven off 10 minutes before the end of cooking time to
exploit the residual heat and save energy.
o Your roast will be juicer if cooked in a closed pan. It will be crispier
if cooked without a lid.
o Normally white meat, poultry and fish need medium temperatures
(less than 200°C).
o To cook “rare” red meats, high temperatures (over 200°C) and
short cooking times are needed.
o For a tasty roast, lard and spice the meat.
o If your roast is tough, next time leave the meat to ripen longer.
o If your roast is too dark on top or underneath, next time put it on a
higher or lower shelf, lower the temperature and cook for longer.
o If your roast is undercooked, cut it in slices and arrange the slices
on a baking tray with gravy and finish cooking it.
Cleaning and maintenance
Cleaning operations must only be carried out when the
oven is cool.
The appliance should be disconnected from your mains
supply before commencing any cleaning process.
o The oven should be thoroughly cleaned before it is operated for the
first time and after each use. This will avoid residual food stuffs
becoming baked on the oven cavity. After residues have been
baked on several times, they are far more difficult to remove.
o Never clean the oven surfaces by steam cleaning.
o The oven cavity should only be cleaned with warm soapy water,
using either a sponge or soft cloth. No abrasive cleaners should be
used.
o Any stains that may appear on the bottom of the oven will have
originated from food splashes or spilt food, these splashes occur
during the cooking process. These could possibly be a result of the
21
food being cooked at an excessively high temperature or being
placed in cookware that is too small.
o You should select a cooking temperature that is appropriate for the
food that you are cooking. You should also ensure that the food is
placed in an adequately sized dish and that you use the enamelled
baking tray where appropriate.
o Outer parts of the oven should only be cleaned with warm soapy
water, using either a sponge or soft cloth. No abrasive cleaners
should be used.
o We would recommend that an appropriate stainless steel cleaner
and polish is regularly used on the stainless steel surfaces of this
appliance.
o If you use any form of oven cleaner on your appliance, then you
must check with the manufacturer of the cleaner that it is suitable
for use on your appliance.
o Do not use harsh or abrasive cleaners or sharp metal scrapers to
clean the oven door glass since they can scratch the surface which
may result in shattering.
o Any damage that is caused to the appliance by a cleaning
product will not be fixed by Baumatic free of charge, even if
the appliance is within the guarantee period.
Cleaning the gas hob top
o Remove the dirty pan supports from the hob and place in warm
soapy water for some time. Then wash and dry before replacing.
After each use
o Wipe the appliance over with a damp cloth and a little washing up
liquid.
o Dry the appliance by rubbing the surface with a clean cloth.
22
Cleaning the burners
o Gas burners should be cleaned regularly and after each spillage
to remove cooking residues and dirt.
o To
clean
the
burners,
remove the caps and rings
and place them separately in
warm soapy water. After
cleaning them, check that
the burner ports are clear.
o The body near the nozzle
should always be clean. Dirt
accumulating around the
nozzle may clog it, as a
result of which the burner
will not light or will light only
with a small flame. To clean
the nozzle use a brush
soaked in solvent.
o Dry all the elements of the burner carefully as wet elements may
not light properly. Assemble the clean and dry burners carrying
out the disassembly steps in reverse order.
Cleaning the oven
o The oven compartment is coated with vitreous enamel. To clean
particularly difficult burnt spots a special oven cleaning agent
may be used. However, as these agents are caustic, be careful
when using them and follow the manufacturer’s guidelines.
Warning: Do not steam pressure clean the oven.
Always wait until the oven cools down before cleaning.
23
Replacing the oven bulb
IMPORTANT: The oven must be disconnected from your
mains supply before you attempt to either remove or
replace the oven bulb.
o Draw out the side guide rails in order
to provide access to the bulb.
o Remove the glass protection cap (C)
from the bulb socket by lifting it with a
screwdriver placed between the cap
and the oven wall.
o Replace the bulb (B) with
W/300°C, screw type pygmy.
a
15
o Do not use any other type of bulb.
o Screw the lamp cover back into its original position.
Removing the oven door for cleaning
o The oven door can be removed to give easier access to the oven
when cleaning.
o Open the oven door and insert a rivet or nail (R) in the hole (F)
of the hinge (see image below).
o Partially close the door, forcing it
upwards at the same time to free
the stop tooth and hinge sector.
o Once the hinge is free, pull the door
forwards tilting it slightly upwards
to free the sector.
o To reassemble, proceed in the reverse order, playing attention to
the correct position of the sectors.
24
Removing the inner door glass for cleaning
Ensure the top cavity is cold before cleaning.
o Simply open the oven door and remove the support securing the
glass. The glass will then slide out easily.
o To replace the glass, follow the first step in reverse.
WARNING: This procedure can be carried out with the door
fitted on the appliance but pay attention that when the glass is
pulled upwards, the force of the hinges can close the door
roughly.
o IMPORTANT: You should make sure that the door is supported
at all times and that you place the door on some padded
material whilst cleaning it.
o The oven door and door glass should only be cleaned using a
damp cloth and a small amount of detergent. The cloth MUST
NOT have come into contact with any form of cleaning product
or chemical previously.
Removing the side racks for cleaning
o For an effective cleaning of the
oven side guide rails, these can
be extracted by unscrewing the
knurled nuts.
o To fit the rails back in their place,
first insert rear pins in the holes
and then secure them with the
knurled nuts.
25
Installation
The installation must be carried out by a suitably
qualified person, in accordance with the current
version of the following.
o UK Regulations and Safety Standards or their European
Norm Replacements.
o Building Regulations (issued by the Department of the
Environment).
o Building Standards (issued by the Scottish Development
Department).
o IEE Wiring Regulations.
o Electricity At Work Regulations.
o Gas
Safety
(Installation
and
Use)
(Amendment)
Regulations.
Positioning
The adjacent furniture and all materials used in the
installation must be able to withstand a minimum
temperature
of
85°C
above
the
ambient
temperature of the room it is located in, whilst in
use.
o Your appliance is heavy, so you should be careful when moving
or positioning it.
o Do not try to move the cooker by pulling on either the door,
handle or control panel.
o It can also be used as freestanding, with a cabinet to one side, in
a corner setting or with its back to a wall.
26
o IMPORTANT: It should not be installed at the end of a run of
cabinets, if there is a cabinet at immediate right angles to the
cooker door.
o The wall behind the cooker and 450 mm above and across the
width of the cooker should be an incombustible material and
preferably an easy clean surface, such as ceramic tiles.
o Any overhanging surface or cooker hood should be at least 700
mm above the highest point on the hob top (including the
burners).
o Baumatic do not recommend that the cooker is positioned below
wall cupboards, as the heat and steam from the appliance and
what is being cooked, may damage the cupboard and its
contents.
o The cooker may be located in a kitchen, or a bedroom, but not in
a room containing a bath or shower. The cooker must not be
installed in a bedroom of less than 20m³ in size.
o The cooker is fitted with four legs that can be adjusted to match
the height of your kitchen cabinets.
o If the cooker is not level or is unstable due to an uneven floor
surface, use the adjustable feet to alter each corner until the
cooker is level.
o To assemble them it is necessary to raise the cooker and to
screw the four legs into position, on each corner of the base of
the appliance.
o IMPORTANT: They must be screwed clockwise into position and
not just slotted into the holes on each corner. You must screw
them through the brackets that are also provided.
27
Ventilation requirements
o The room containing the cooker should have an air supply in
accordance with the current edition of BS 5440: Part 2:
o The room must have opening windows or equivalent; some
rooms may also require a permanent vent.
o If the room has a volume between 5 and 10m³, it will require an
air vent of 50cm² (effective area). Unless it has a door which
opens directly to the outside.
o If the room has a volume of less than 5m³, it will require an air
vent of 100cm² (effective area).
o If there are any other fuel burning appliances in the same room
the current edition of BS 5440: Part 2: should be consulted to
determine air vent requirements.
o Ensure that the room containing the cooker is well ventilated,
keep natural ventilation holes or install a mechanical ventilation
device (mechanical cooker hood).
o Prolonged intensive use of the appliance may call for additional
ventilation, either by the opening of a window, or by increasing
the level of the mechanical ventilation device (where present).
28
o This cooker is not fitted with a device for discharging the
products of combustion. Ensure that the ventilation rules and
regulations are followed.
o Excess steam from the oven, vents out at the top back edge of
the cooker, so make sure that the walls behind and near the
cooker are resistant to heat, steam and condensation.
o Your cooker must stand on a flat surface so that when it is in
position the hob is level. When in position check that the cooker
is level by using a spirit level and adjust the 2 feet at the rear
and the 2 feet at the front if necessary.
o Remember that the quantity of air necessary for combustion
must never be less than 2m³/h for each kW of power (see total
power in kW on the appliance rating plate).
Securing the back-guard
o In order to attach the back-guard (A) to the appliance, you need
to loosen the screws (B) positioned on the back of the hob (see
image below).
o Fix the back-guard into place by screwing the screws back into
the hob with the back-guard placed in between.
Fitting the safety chain and hook
o To prevent the cooker from tipping forward, two lengths of chain
MUST BE fixed to the back of the oven which should be secured
to the hook provided at all times.
o The hook should be secured to the wall at the back of the
cooker. The chains should always be attached to the upper hook
when the cooker is in position against the wall.
29
o Attach the chain to the lower hook if the cooker is installed with
a hose assembly so that there is no strain on the hose when the
cooker is pulled forward for cleaning or maintenance.
o Fix the upper hook into the wall immediately behind and to the
left hand side about 770 mm from the floor.
o Secure the chain to the hook before using or cleaning the oven.
o To prevent strain on the flexible hose assembly, a lower chain
and hook can be fixed approximately 100 mm up from the floor
30
Electrical connection
This appliance must be installed by a qualified
person in accordance with the latest edition of the
I.E.E. Regulations and in compliance with Baumatic’s
instructions.
Before connecting the appliance, make sure that the supply voltage
marked on the rating plate corresponds with your mains supply
voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
o This appliance must be wired into a 20 A double pole switched
fused spur outlet, having 3 mm contact separation and placed in
an easily accessible position adjacent to the appliance. It should
not be located above the appliance and no more than 1.25m
away from it.
o The spur outlet must still be accessible even when your oven is
located in its operating position.
o Cable type: H05 RRF 3 core x 1.5 mm²
Connecting the mains supply cable
IMPORTANT
The wires in the mains lead are coloured in accordance with the
following code:
GREEN AND YELLOW
BLUE
BROWN
EARTH
NEUTRAL
LIVE
o Release the cover plate by removing the cover screw.
31
o Loosen the cable clamp.
o Feed the mains connection cable through the grommet in the
back panel and cable clamp. Connect the mains supply cable to
the terminal block on the cooker using the colour code on the
previous page.
o Secure the cable clamp. Check the cable terminals for tightness
and ensure that the terminal links are in place, then replace the
cover plate and cover screw.
Gas connection
This appliance must be installed by a competent
person in accordance with the current versions of
the following UK (United Kingdom) or ROI (Republic
of Ireland) Regulations and Safety Standards or
their European Norm Replacements.
Important information
o This cooker is supplied to run on natural gas only and cannot
be used on any other type of gas without modification.
o Conversion for use on LPG and other gases must only be
undertaken by a qualified person. For information on the use of
other gases, please contact the Baumatic Technical Department.
o The cooker must be installed by a qualified person, in
accordance with the current edition of the Gas Safety
(Installation and Use) (Amendment) Regulations and the
relevant building/I.E.E. Regulations.
o Failure to install the appliance correctly could invalidate
Baumatic’s guarantee and lead to prosecution under the
regulations quoted above.
o In the UK, GASSAFE registered installers are authorised to
undertake the installation and service work, in compliance with
the above regulations.
32
Gas Safety (Installation and Use) Regulations
o It is the law that all gas appliances are installed by competent
persons in accordance with the current edition of the Gas Safety
Installation and Use Regulations.
o It is in your interest and that of safety to ensure compliance with
the law.
o In the UK, GASSAFE registered installers work to safe standards
of practice. The cooker must also be installed in accordance with
the current edition of BS 6172. Failure to install the cooker
correctly could invalidate the warranty, liability claims and lead
to prosecution.
o IMPORTANT: It is a requirement for a stability chain to be
fitted to the appliance. Please see page 35 for more
detailed information on this.
Gas connection
ALL INSTALLATION AND SERVICE WORK MUST BE
CARRIED OUT BY A GASSAFE REGISTERED ENGINEER.
o Prior to installation, ensure that the gas supply conditions
(nature of the gas and gas pressure) and the adjustment
conditions are compatible. The adjustment conditions for this
appliance are stated on the rating plate which can be found on
the back cover.
o This appliance is not designed to be connected to a combustion
product evacuation device. Particular attention should be given
to the relevant requirements regarding ventilation.
o IMPORTANT: THE FIBRE WASHERS MUST BE IN PLACE
WHEN CONNECTING THE ADAPTOR ELBOW.
o Connect the short transition pipe to the elbow, inserting the
washer. Connect the brass adapter with the test point to the nut
of the transition pipe, inserting the washer. Then fix the
retention device with the screw.
o Connection to the cooker should be made with an approved
appliance flexible connection to BS 669.
o If the cooker has been converted for use with LPG, then it should
be connected to the gas supply using an appropriate bayonet
33
type hose. The hose MUST be suitable for use with LPG gas,
these are identifiable by a red band or stripe.
o A hose length of 0.9m to 1.25m is recommended. The length of
hose chosen should be such that when the cooker is in situ, the
hose does not touch the floor.
o Care should be taken to ensure that the temperature rise of
areas at the rear of the cooker that are likely to come in contact
with the flexible hose do not exceed 70°C.
o Gas pressure may be checked on a semi-rapid hob burner.
Remove the appropriate injector and attach a test nipple. Light
the other burners and observe that the gas pressure complies
with the gas standards in force.
o This cooker can be connected to the supply both on the right and
left hand side at the rear of the cooker. To reverse the position,
remove the blanking plug and refit it to the opposite side to
where the hose is being connected.
Gas adjustment (Conversion to LPG for the hob top)
All work must be
registered engineer.
carried
out
by
a
GASSAFE
IMPORTANT: Always isolate the cooker from the electricity
supply before changing the injectors and/or adjusting the
minimum flow of the burners.
o Remove the pan-stands,
spreaders (A).
burners
and
flame
o Unscrew the injector (B) and replace it with the
stipulated injector for the new gas supply (see table
on the next page).
34
Burner
Rapid
Semi rapid
Auxiliary
Triple
Crown
Operating
pressure gas
mbar
G30 28 Butane
30
G31 37
Propane
G20 20
Natural
G30 28 Butane
30
G31 37
Propane
G20 20
Natural
G30 28 Butane
30
G31 37
Propane
G20 20
Natural
G30 28 Butane
30
G31 37
Propane
G20 20
Natural
Rate
g/h
218
L/h
N/A
Diameter
injector
1/100mm
88
Heat Input
(W)
Min
Max
800
3000
214
N/A
88
800
3000
N/A
286
117 - Y
800
3000
131
N/A
68
600
1800
129
N/A
68
600
1800
N/A
171
98 - Z
600
1800
73
N/A
51
400
1000
71
N/A
51
400
1000
N/A
95
75 - X
400
1000
276
N/A
98
1400
3800
272
N/A
98
1400
3800
N/A
362
135 - K
1400
3800
By-Pass
1/100mm
44
34
28
62
o Reassemble all the burners carefully; in particular you should
make sure that the flame spreader is correctly placed on the
burner.
IMPORTANT: After changing the injectors YOU MUST follow the
minimum flow adjustment section below.
Minimum flow adjustment for hob gas taps.
All work must be
registered engineer.
carried
out
by
a
GASSAFE
o Light the burner and set the knob at the minimum
position.
o Remove the knob from the tap. The adjustment
screw is located beside the valve body.
o Place a small bladed screwdriver in the centre of
the tap shaft.
o Unscrew the adjusting screw, in order to increase
the gas flow or tighten the adjusting screw to
decrease the gas flow.
35
o The correct adjustment is obtained when the flame has a length
of about 3 – 4 mm.
o For butane/propane gas, the adjusting screw must be tightly
screwed in.
o Refit the control knob.
o Make sure that the flame does not go out by quickly turning from
maximum flow to minimum flow. If it does then remove the
control knob and make further adjustments to the gas flow,
testing it again once the adjustment has been made.
o IMPORTANT: On completion carry out a gas tightness test.
Gas tap replacement
All work must be
registered engineer.
carried
out
by
a
GASSAFE
IMPORTANT: Always isolate the cooker from the electricity
supply before changing the gas taps.
o Remove all pan supports and burner heads.
o Unscrew the burner fixing screws (A) (four for the triple crown
burner and two for all others) as shown in the diagram below:
o Pull out the knobs.
o Unscrew the six fixing screws (B) which lock the side profiles
and remove it.
36
o Remove the hob by unscrewing the
rear fixing screws (B) which lock the
hob at the supports (C).
o Unscrew the nuts (E) of the gas
aluminium pipes and pull out the
thermocouple quick connectors (F).
o Unscrew the screws (D) which lock
the crosspieces.
o Unscrew the screws (G) which unite
the bridles of the taps to the front
frame.
o Slip the ramp towards the back part
and unscrew the screws (G) in order
to free the taps.
o Change the seal each time a tap or a
thermostat is replaced. This will
ensure perfect retention between the
tap or a thermostat and part.
o Reassemble all the parts following the same procedure but in the
reverse order.
My appliance isn’t working correctly
o The oven isn’t coming on.
* Check that the oven is in manual operation mode.
* Check that you have selected a cooking function and a cooking
temperature.
o There appears to be no power to the oven and grill.
* Check that the appliance has been connected to the electrical
mains supply correctly.
* Check that the mains fuses are in working order.
* Check that the operating instructions for setting the time of day
and putting the appliance into manual operation mode have been
followed.
37
o The grill function works but the main oven does not.
* Check that you have selected the correct cooking function.
o The grill and top oven element is not working, or cuts out
for long periods of time during use.
* Allow the oven to cool for approximately 2 hours. Once cool,
check whether the appliance is again working properly.
o My food is not cooking properly
* Ensure that you are selecting the correct temperature and the
correct cooking function for the food that you are cooking. It
may be appropriate to adjust your cooking temperature to
achieve the best cooking results.
o My food is not cooking evenly
* Check that the oven has been installed correctly and is level.
* Check that the correct temperatures and shelf positions are
being used.
o The oven light is not working
* Refer the “Replacing the oven bulb” section.
o I am getting condensation in my oven
* Steam and condensation is a natural by product of cooking any
food with high water content, such as frozen food, chicken etc.
* You may get condensation in the oven cavity and forming
between the oven door glasses. This is not necessarily a sign
that the oven is not working correctly.
* Do not leave food in the oven to cool after it has been cooked
and the oven has been switched off.
* Use a covered container, where practical, when cooking to
reduce the amount of condensation that forms.
38
IMPORTANT: If your appliance appears not to be
operating correctly, then you should disconnect it
from your mains supply and then contact
Baumatic Customer Care on telephone number
(0118) 933 6911.
DO NOT ATTEMPT TO REPAIR THE APPLIANCE
YOURSELF.
Please note that if an engineer is asked to attend whilst the product is
under guarantee and finds that the problem is not the result of an
appliance fault, then you may be liable for the cost of the call out
charge.
The appliance must be accessible for the engineer to perform
any necessary repair. If your appliance is installed in such a
way that an engineer is concerned that damage will be caused
to the appliance or your kitchen, then they will not complete a
repair.
This includes situations where appliances have been tiled in,
sealed in with sealant, have wooden obstructions placed in
front of the appliance - like plinths, or any installation other
than the one specified by Baumatic Ltd. has been completed.
Please refer to the conditions of guarantee that appear on the
warranty card that you receive with the appliance.
39
Baumatic Consumables
o BC001 Degreaser for Dishwashers (200 g)
o BC002 Descaler for Washing Machines and Dishwashers (200 g)
o BC003 Ceramic Hob Cleaner (250 ml)
o BC004 Oven Cleaner (250 ml)
o BC005 Stainless Steel Cleaner and Protector (250 ml)
o BC007 E-Cloth – General Purpose Cloth
o BC008 Microwave Cover
To order a Baumatic consumable product please call 0123 5437 244
and quote the product code. You can also order online from
eshop.baumatic.co.uk
40
United Kingdom
Baumatic Ltd.,
Baumatic Buildings,
6 Bennet Road,
Reading, Berkshire
RG2 0QX
United Kingdom
Czech Republic/Slovakia
Baumatic s.r.o.
Lípová 665/1
460 01 Liberec 4
Czech Republic
Sales Telephone
(0118) 933 6900
Sales Fax
(0118) 931 0035
Customer Care Telephone
(0118) 933 6911
Customer Care Fax
(0118) 986 9124
Spares Telephone
(01235) 437244
Advice Line Telephone
(0118) 933 6933
Panenská 34
811 03 Bratislava - Staré Mesto
Slovakia
E-mail:
[email protected]
[email protected]
[email protected]
[email protected]
Deutschland 0049(0)180-5888975
Oesterreich +43 (0) 820 / 420423
+420 483 577 200 (CZ)
+421 255 640 618 (SK)
www.baumatic.cz
www.baumatic.sk
Germany
Kundendienst & Ersatzteile
www.baumatic.de
Italy
Baumatic Italia S.R.L.
Via Galvani N.3
35011 Campodarsego (PD)
Website:
www.baumatic.co.uk
Facebook:
www.facebook.com/baumatic.uk
+3904 9920 2297
www.baumatic.it
Republic of Ireland
Holland
Baumatic Benelux B.V.
Dukdalfweg 15d
1332 BH ALMERE
Nederland
Service Telephone
1-890 812 724
Spares Telephone
091 756 771
+31(0)36 549 1553/1555
www.baumatic.nl
41
42
43
44
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement