Model 63200 Series High Power DC Electronic Load

Model 63200 Series High Power DC Electronic Load
Programmable
DC Electronic Load
MODEL 63200 SERIES
Key Features
■ Power Rating :
2600W, 5200W, 6500W, 10000W, 10400W,
14500W, 15600W
■ Voltage range : 0 ~ 80V/0 ~ 600V/0 ~ 1000V
■ Current range : Up to 1000A
■ CC, CR, CV, CP load modes
■ Master/Slave paralleling control mode,
allow synchronous load control under
static and dynamic loading mode
(Up to 93.6kW)
■ Dynamic loading : Up to 20kHz
■ Only need 1V to draw rated current
■ Programmable slew rate, up to 41A/µs
■ Measurement : Voltage/Current/
Power/Resistance
PROGRAMMABLE DC ELECTRONIC LOAD
MODEL 63200 SERIES
Chroma's 63200 series of programmable electronic
loads are designed for a wide variety of dc power
conversion products including; DC power sources,
battery chargers, server power supplies, dc-dc
converters, batteries and many others. The
high power rating, parallel and synchronization
capabilities, and the ability to provide up to 2.7
times of rated power for short duty cycle loading
make 63200 series especially well-suited for high
power applications such as switch-mode rectifiers
and for discharging batteries packs and fuel cells.
The 63200 series offers 12 different models with
power ranges from 2600 watts to 15600 watts,
currents from 50A to 1000A and operating
voltages from 0 to 1000V. By paralleling modules
very large systems can be assembled existing
93.6kW. Four operating modes provide different
load simulation methods designed for various
applications. The CC/CR modes are designed
to test constant voltage power supplies and
converters. CV mode simulates the battery for
testing battery chargers and current sources, and
CP mode is ideal for battery testing by simulating
real discharge profiles.
The 63200 series can sink rated current down
to 1VDC even under the highest specified rise
time. This unique feature guarantees the best
loading performance for low voltage/high current
applications. With it's unique external waveform
simulation and Master / Slave control capability,
the 63200 series electronic loads allow users to
parallel and synchronize more than one load
together using an internal or external loading
control signal. This feature provides unlimited load
simulation and increased power.
T h e 63200 s e r i e s a l s o p ro v i d e s n e c e s s a r y
m e a s u re m e n t f u n c t i o n s a n d s h o r t c i rc u i t
simulations that extend the test capability for the
most demanding engineering and automated test
applications.
With front LCD displays and rotary knob, the 63200
loads offer versatile bench top operation. Users are
also able to control the loads remotely via GPIB or
RS-232 interface or with a USB adapter. Complex
waveforms can also be created by driving the
loads from an analog programming source (i.e.
function generator).
Chroma 63200 loads incorporate built-in fan
speed controls to minimize audio noise. The selfdiagnosis routines, built-in protection against OC,
OP, OT, and an alarm indicating OV reverse polarity
to ensure safe operation and reliability.
RS-232
GPIB
■ Large LED/LCD display
■ External loading waveform simulation
■ Short circuit simulation and short
circuit current measurement
■ Full protection : OC, OP, OT protection
and OV, reverse alarm
■ Versatile remote controller
■ GPIB & RS-232 interfaces
■ Surge load capability
■ Battery discharge timer
APPLICATION SPECIFIC LOAD SIMULATION
Chroma's 63200 series electronic loads provide constant current, constant resistance, constant voltage and constant power modes.
The CC and CR mode load simulation is helpful to test whether the output voltage of the UUT remains stable, or regulated under different load
conditions. For battery chargers, CV mode can change the output voltage to test if the battery charger is providing the correct charging current
corresponding to the battery voltage. If the UUT is a battery, the electronic load is able to simulate the behavior of the device that uses the battery. For
many battery discharge applications, power consumption patterns need to be analyzed. The constant power, or CP mode, is ideal for these applications.
V
V
I
I
Constant current
V
V
Constant resistance
I
Constant voltage
I
Constant power
LOW VOLTAGE OPERATING CHARACTERISTICS
For low voltage/high current applications, the 63200 series is available with a low voltage mode, which provides ultra-low voltage operation and in many
cases can compensate for large voltage loss in the input wiring.
The 63200 series loads use a current closed loop design connecting all power MOSFET devices in parallel, to insure high accuracy load control with
minimal drift (less than 0.15% of the current setting). The MOSFET technology keeps the input impedance to a minimum and enables the load to draw
very high current even at very low voltages. For example, the model 63209 is capable of drawing 1,000A at only 1V input.
Model 63209(15600W) Input Characteristics
MEASUREMENTS
The Chroma 63200 series loads have a built-in 15-bit precision A/D converter that can achieve 0.05%+0.05% F.S., 0.1%+0.1% F.S. and 0.3%+0.3% F.S.
accuracy for voltage, current, and power measurements respectively. These measurements can be displayed simultaneously on three big LED readouts for
convenience. In addition to standard measurements, the 63200 series also provides voltage and current monitor outputs, which are useful when the user
needs to monitor the voltage and current waveform via a scope.
DYNAMIC LOADING AND CONTROL
Modern electronic devices operate at very high speeds; therefore, it is important for an electronic load to perform well during the transient and dynamic
testing. To satisfy these testing applications, the 63200 loads offer outstanding high speed, programmable dynamic load simulation and control
capabilities. The figure below shows the programmable parameters of the 63200 load modules. The programmable slew rate makes the simulation
of transient load changes demanded by the requirement of real life application possible. The internal waveform generator of the 63200 is capable of
producing a maximum slew rate of 25A/µs (63208), and dynamic cycling up to 20kHz. Its dedicated remote load sense and control circuitry guarantee the
minimum waveform distortion during continuous load changes.
MASTER / SLAVE PARALLEL CONTROL
When higher power is required, it is common to parallel two electronic loads together to draw higher current. The
63200 series high power loads have a smart Master/Slave control mode. When the loads are set to Master/Slave mode,
users can program the loading (CC mode only) on the master unit. The loading current values of the slave unit(s) will
be calculated and downloaded by the master unit automatically. In short, unlike traditional designs, users now have
the option of operating several loads in Master/Slave mode as a single load unit.
EXTERNAL LOADING WAVEFORM SIMULATION
The 63200 series electronic loads can be controlled by an external analog control signal, which is generated by any kind of signal or an arbitrary waveform
generator. This makes it capable of simulating any loading waveform observed in the field within the load specifications.
Arbitrary Waveform Generator
SHORT CIRCUIT SIMULATION
Chroma's 63200 series electronic loads can also simulate a short circuit condition. The load can short a DC power source or any power supply that has a
built in current limit function and measure its short circuit current so that users can verify if the UUT current limit is functional.
SURGE LOAD CAPABILITY
Chroma's 63200 Series DC Loads provide a unique surge load
simulation capability which allows users to overdrive the
loads up to 2.7 times their rated power for short periods. This
feature is ideal when the average power required by the UUT
is low compared to short-term peak power demands. Plasma
Display Panel (PDP) testing is one typical applications, others
include battery 3C discharge, breaker & fuse over rating (300%
to 1000%) tests, car engine startup simulation and DC motor
startup simulation.
The amount of surge loading available using the 63200 loads
is related to initial loading conditions. Figures 1 and 2 show
the relationship of the initial state (Load_Low under Dynamic
mode) and the maximum acceptable overdrive power. Under
this operation, the load will display an Over Power Protection
Example 1: STATIC LOADING
The Model 63201 can be overdriven to approximately 5200W (200% of its rated continuous
power rating) for 6.0 ms when the starting power is 650W (25% of its rated power). This is
represented by DOT on the blue curve in Figure 1.
Alarm (OPP) and will disable the load current if the user violates
the maximum surge load capability showed in the figures.
Note 1 :
The Initial state under Static Mode should last at least 1 second.
Note 2 :
This surge load capability will be regulated by the temperature
de-rating characteristics. (Refer to Note 1 in Specifications)
Note 3 :
Examples below assume the use of the Model 63201 load with
a continuous rating of 2600W/300A/1-80VDC
Example 2: DYNAMIC LOADING
The Model 63201 is capable of a zero - to- 6500W (250%) pulse at a duty cycle of 5%. This is
represented by the DOT on the purple curve in Figure 2.
Note 4 :
Model 63211/63212 does not support this feature.
TIMER FUNCTION FOR BATTERY DISCHARGE TESTING
The 63200 loads include a unique timing and measurement
function. This allows for precision time settings and
measurements in the range of 1s to 99,999s. This feature
also allows users to set a final cutoff voltage and timeout
value for battery discharge testing and similar applications.
For example, the figure to the right shows that the 63200's
internal timer can be initiated automatically when starting
load on. The timer will stop counting until the cutoff voltage
value is reached, or timeout occurs.
APPLICATIONS
Power Supply Testing
Power supplies play a critical role in electrical and electronic devices. They have diversified into several different configurations for various applications.
For example, AC/AC power supplies are used for UPS and AVR, AC/DC power supplies are used for server power supplies, and DC/AC power supplies are
used for inverters that transfer battery power to AC for home appliances. Lastly, DC/DC converters are widely used in battery powered devices such as
cellular phones and laptop computers. With four different load modes, Chroma 63200 series electronic loads are capable of testing many different DC
output power supplies either directly or via a rectifier. They can also be used to test AC output power supplies.
CC & CR Mode
Server Power Supply
Rectifier
CV Mode
Charger Station
UPS/AVR
Electronic & Electrical Devices Testing
Almost all modern electronic equipment have a built in
power supply. Therefore, a DC electronic load is an important
instrument for these devices during the R/D and Q/A phases.
For example, A/D, D/D and D/A stages are normally integrated
within a UPS. The Chroma 63200 electronic loads are helpful in
testing the internal A/D and D/D boards of UPS devices.
Battery Testing
For most applications, power consumption patterns are based on constant power. Therefore, the CP mode of the 63200 series electronic load is ideal to
use as a discharge load for battery testing.
I
Discharge by CC mode
V
I
Discharge by CR mode
V
I
Discharge by CP mode
V
System integration
Chroma 63200 series electronic loads provide GPIB, RS-232 and RS-485 PC controllable interfaces. These features combined with the external waveform
simulation and voltage / current monitoring capability make Chroma 63200 series ideal for automatic system integration.
SOFTPANEL
The 63200 series can be operated from the front
panel or controlled by softpanel software. The
user friendly software includes all the functions
of 63200 series, and is easy to understand and
operate. The 63200 series can be configured
with either GPIB or RS-232 interfaces as an
option for remote control and automated
testing applications.
Battery Discharge Test
Main Operation Menu
Sequence Test
Dynamic Test
OCP Test
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
Model: 63203, 63204
10
11
12
13
14
15
16
17
1. Power Switch
2. LED Display:
Voltage read back
3. LED Display:
Current/ ohm read back
4. LED Display:
Power read back
5. LCD Display:
For setting and editing
6. Rotary knob:
To adjust the loading and parameter setting
7. Numeric key:
For data setting
8. Function key:
To select load mode, control mode, and define the
reading specification
9. System key:
For system config and data store, recall
10. Load terminal
11. Voltage sense terminal
12. RS-485 connector
13. GPIB connector
14. RS-232C connector
15. Voltage monitor output:
Analog output which indicates the voltage waveform
16. Current monitor output:
Analog output which indicates the current waveform
17. External V reference:
External programming voltage input
LOW VOLTAGE & V-I CURVE OPERATING CHARACTERISTICS (TYPICAL) OF 63200 SERIES
V-I Curve :
Model 63202/ 63204/ 63210/ 63211/ 63212
Voltage (V)
Voltage (V)
V-I Curve :
Model 63201/ 63203/ 63205/ 63206/ 63207/ 63208/ 63209
100
90
80
1100
63212
1000
63211
900
800
70
700
60
63210
600
50
500
40
400
63207
30
300
63209
20 63201
63204
63206
200
63208
10
100
63203
63205
0
63202
0
0
100
200
300
400
500
600
700
800
900 1000
0
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
Current (A)
Current (A)
Low Voltage Operating :
Model 63202/ 63204/ 63210/ 63211/ 63212
Current (A)
Current (A)
Low Voltage Operating :
Model 63201/ 63203/ 63205/ 63206/ 63207/ 63208/ 63209
1000
160
150
140
63210
63209
900
130
63211/63212
120
800
110
700
100
63203/63206/63208
90
600
63204
80
500
70
60
400
63201/63207
63202
50
300
40
63205
200
30
20
100
10
0
0
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
0
1
2
3
4
5
6
7
Voltage (V)
8
9
10
11
Voltage (V)
Note: All specifications are measured at load input terminals. (Ambient temperature of +25℃)
Model 63208 / 63209 / 63210
Model 63201 / 63202
Model 63203 / 63204
Model 63211 / 63212
Model 63205
Model 63206 / 63207
SPECIFICATIONS-1
Model
63201
Power *1
260W
2600W
Current
0~30A
0~300A
Voltage *2
0~80V
0.5V @ 15A
0.5V @ 150A
Min. Operating
voltage
1V @ 30A
1V @ 300A
Constant Current mode
Range
0~30A
0~300A
Resolution
7.7mA
77mA
Accuracy
0.1%+0.1%F.S.
0.2%+0.1%F.S.
Constant Resistance Mode
Range
0.005~20Ω
0.25~1000Ω
Resolution*3
52mS
1.04mS
Accuracy*4
0.104S+0.35%
0.9S+0.1%
Accuracy*6 (Vin>7V)
0.104S+0.35%
0.0021S+0.35%
Constant Voltage mode
Range
0~16V
0~80V
Resolution
4mV
20mV
Accuracy
0.05%+0.1%F.S.
Constant Power mode
Range
0.6~260W
6~2600W
Resolution
7.5mW
75mW
Accuracy
0.5%+0.5%F.S.
Dynamic mode
Timing
T1&T2
0.025~10ms
1ms~30s
Resolution
1µs
1ms
Accuracy
1µs+100ppm
1ms+100ppm
Slew rate
5mA~1.25A/µs
50mA~12.5A/µs
Resolution
5mA/µs
50mA/µs
Accuracy
10% ± 20µs
Min. Rise Time
24µs (typical)
Current
Range
0~30A
0~300A
Resolution
7.7mA
77mA
Accuracy
0.4%F.S.
Measurement
Voltage Read Back
Range
0~16V
0~80V
Resolution
0.6mV
2.6mV
Accuracy
0.05%+0.05%F.S.
Current Read Back
Range
0~30A
0~300A
Resolution
1mA
10mA
Accuracy
0.1%+0.1%F.S.
Power Read Back
Range
0~260W
0~2600W
Accuracy*7
0.3%+0.3%F.S.
General
Short Circuit
current
30A
300A
1Ø 100/200Vac ± 10% VLN, 47~63Hz ;
Input Rating
1Ø 115/230Vac ± 10% VLN, 47~63Hz
Dimension
177 x 440 x 589 mm /
(H x W x D)
6.9 x 17.3 x 23.2 inch
Weight
30 kg / 66.13 lbs
Safety & EMC
CE
63202
63203
260W
0~5A
2600W
0~50A
520W
0~60A
5200W
0~600A
1.5V @ 2.5A
3V @ 5A
1.5V @ 25A
3V @ 50A
0.5V @ 30A
1V @ 60A
0.5V @ 300A
1V @ 600A
0~5A
1.4mA
0.1%+0.1%F.S.
0~50A
14mA
0.2%+0.1%F.S.
0~60A
16mA
0.1%+0.1%F.S.
0~600A
160mA
0.2%+0.1%F.S.
0.25~1000Ω
1.2mS
0.0046S+0.35%
0.0046S+0.35%
10~40000Ω
28.8µS
0.04S+0.1%
114µS+0.35%
0.0025~10Ω
104mS
0.208S+0.35%*5
0.208S+0.35%
0.125~500Ω
2.1mS
1.2S+0.1%
0.0042S+0.35%
0~16V
4mV
0~80V
20mV
0~600V
0~80V
0~150V
0~600V
40mV
162mV
0.05%+0.1%F.S.
0.05%+0.1%F.S.
0.625~260W
6.25~2600W
3.125mW
31.25mW
0.5%+0.5%F.S.
1.2~520W
12~5200W
22.5mW
225mW
0.5%+0.5%F.S.
0.025~10ms
1ms~30s
1µs
1ms
1µs+100ppm
1ms+100ppm
0.8mA~0.2A/µs
8mA~2A/µs
0.8mA/µs
8mA/µs
10% ± 20µs
24µs (typical)
0.025~10ms
1ms~30s
1µs
1ms
1µs+100ppm
1ms+100ppm
10mA~2.5A/µs
100mA~25A/µs
10mA/µs
100mA/µs
10% ± 20µs
24µs (typical)
0~5A
1.4mA
0~50A
14mA
0~60A
16mA
0~600A
160mA
0.4%F.S.
0.4%F.S.
0~150V
0~600V
5.1mV
21mV
0.05%+0.05%F.S.
0~16V
0~80V
0.6mV
2.6mV
0.05%+0.05%F.S.
0~5A
0.18mA
0~60A
2mA
0~50A
1.8mA
0.1%+0.1%F.S.
0~600A
20mA
0.1%+0.1%F.S.
0~260W
0~2600W
0.3%+0.3%F.S.
0~520W
0~5200W
0.3%+0.3%F.S.
5A
50A
1Ø 100/200Vac ± 10% VLN, 47~63Hz ;
1Ø 115/230Vac ± 10% VLN, 47~63Hz
177 x 440 x 589 mm /
6.9 x 17.3 x 23.2 inch
30 kg / 66.13 lbs
CE
60A
600A
1Ø 100/200Vac ± 10% VLN, 47~63Hz ;
1Ø 115/230Vac ± 10% VLN, 47~63Hz
353 x 440 x 589 mm /
13.9 x 17.3 x 23.2 inch
62 kg / 136.68 lbs
CE
SPECIFICATIONS-2
Model
63204
Power*1
520W
5200W
Current
0~10A
0~100A
Voltage*2
0~600V
1.5V @ 5A
1.5V @ 50A
Min. Operating
voltage
3V @ 10A
3V @ 100A
Constant Current mode
Range
0~10A
0~100A
Resolution
2.8mA
28mA
Accuracy
0.1%+0.1%F.S.
0.2%+0.1%F.S.
Constant Resistance Mode
Range
0.125~500Ω
5~20000Ω
Resolution*3
2.3mS
57.56µS
Accuracy*4
0.0046S+0.35%
0.08S+0.1%
Accuracy*6 (Vin>7V)
0.0046S+0.35%
115.51µS+0.35%
Constant Voltage mode
Range
0~150V
0~600V
Resolution
40mV
162mV
Accuracy
0.05%+0.1%F.S.
Constant Power mode
Range
1.25~520W
12.5~5200W
Resolution
6.25mW
62.5mW
Accuracy
0.5%+0.5%F.S.
Dynamic mode
Timing
T1&T2
0.025~10ms
1ms~30s
Resolution
1µs
1ms
Accuracy
1µs+100ppm
1ms+100ppm
Slew rate
1.6mA~0.4A/µs
16mA~4A/µs
Resolution
1.6mA/µs
16mA/µs
Accuracy
10% ± 20µs
Min. Rise Time
24µs (typical)
Current
Range
0~10A
0~100A
Resolution
2.8mA
28mA
Accuracy
0.4%F.S.
Measurement
Voltage Read Back
Range
0~150V
0~600V
Resolution
5.1mV
21mV
Accuracy
0.05%+0.05%F.S.
Current Read Back
Range
0~10A
0~100A
Resolution
0.35mA
3.5mA
Accuracy
0.1%+0.1%F.S.
Power Read Back
Range
0~520W
0~5200W
Accuracy*7
0.3%+0.3%F.S.
General
Short Circuit
current
10A
100A
1Ø 100/200Vac ± 10% VLN, 47~63Hz ;
Input Rating
1Ø 115/230Vac ± 10% VLN, 47~63Hz
Dimension
353 x 440 x 589 mm /
(H x W x D)
13.9 x 17.3 x 23.2 inch
Weight
62 kg / 136.68 lbs
Safety & EMC
CE
63205
63206
650W
0~18A
6500W
0~180A
1040W
0~60A
10400W
0~600A
0.5V @ 9A
1V @ 18A
0.5V @ 90A
1V @ 180A
0.5V @ 30A
1V @ 60A
0.5V @ 300A
1V @ 600A
0~18A
5.2mA
0.1%+0.2%F.S.
0~180A
52mA
0.1%+0.2%F.S.
0~60A
21mA
0.1%+0.2%F.S.
0~600A
170mA
0.1%+0.2%F.S.
0.008~32Ω
35mS
0.07S+0.35%
0.07S+0.35%
0.4~1600Ω
0.7mS
0.75S+0.1%
0.0014S+0.35%
0.0025~10Ω
112.5mS
0.225S+0.35% *5
0.225S+0.35%
0.125~500Ω
2.25mS
1.2S+0.1%
0.0045S+0.35%
0~16V
4mV
0~80V
20mV
0~16V
4mV
0~80V
20mV
0~80V
0~80V
0.05%+0.1%F.S.
0.05%+0.1%F.S.
0.36~650W
3.6~6500W
4.6mW
46mW
0.5%+0.5%F.S.
1.2~1040W
12~10400W
22.5mW
225mW
0.5%+0.5%F.S.
0.025~10ms
1ms~30s
1µs
1ms
1µs+100ppm
1ms+100ppm
3mA~0.75A/µs
30mA~7.5A/µs
3mA/µs
30mA/µs
10% ± 20µs
24µs (typical)
0.025~10ms
1ms~30s
1µs
1ms
1µs+100ppm
1ms+100ppm
10mA~3A/µs
100mA~25A/µs
12mA/µs
100mA/µs
10% ± 20µs
20µs (typical)
0~18A
5.2mA
0~180A
52mA
0~60A
21mA
0~600A
170mA
0.4%F.S.
0.4%F.S.
0~16V
0~80V
0.6mV
2.6mV
0.05%+0.05%F.S.
0~16V
0~80V
0.6mV
2.6mV
0.05%+0.05%F.S.
0~18A
0.7mA
0~60A
2.6mA
0~180A
7mA
0.1%+0.1%F.S.
0~650W
0~6500W
0.3%+0.3%F.S.
18A
180A
1Ø 100/200Vac ± 10% VLN, 47~63Hz ;
1Ø 115/230Vac ± 10% VLN, 47~63Hz
310 x 440 x 589 mm /
12.2 x 17.3 x 23.2 inch
62 kg / 136.68 lbs
CE
0~600A
21mA
0.1%+0.1%F.S.
0~1040W
0~10400W
0.3%+0.3%F.S.
60A
600A
1Ø 100/200Vac ± 10% VLN, 47~63Hz ;
1Ø 115/230Vac ± 10% VLN, 47~63Hz
443.7 x 440 x 589 mm /
17.5 x 17.3 x 23.2 inch
90 kg / 198.41 lbs
CE
SPECIFICATIONS-3
Model
63207
Power *1
1040W
10400W
Current
0~30A
0~300A
Voltage*2
0~80V
0.5V @ 15A
0.5V @ 150A
Min. Operating
voltage
1V @ 30A
1V @ 300A
Constant Current mode
Range
0~30A
0~300A
Resolution
10.3mA
82mA
Accuracy
0.1%+0.2%F.S.
0.1%+0.2%F.S.
Constant Resistance Mode
Range
0.005~20Ω
0.25~1000Ω
Resolution*3
55.7mS
1.1mS
Accuracy *4
0.111S+0.35%
0.9S+0.1%
Accuracy *6 (Vin>7V)
0.111S+0.35%
0.0022S+0.35%
Constant Voltage mode
Range
0~16V
0~80V
Resolution
4mV
20mV
Accuracy
0.05%+0.1%F.S.
Constant Power mode
Range
0.744~1040W
6~10400W
Resolution
9.3mW
75mW
Accuracy
0.5%+0.5%F.S.
Dynamic mode
Timing
T1&T2
0.025~10ms
1ms~30s
Resolution
1µs
1ms
Accuracy
1µs+100ppm
1ms+100ppm
Slew rate
6mA~1.5A/µs
50mA~12.5A/µs
Resolution
6mA/µs
50mA/µs
Accuracy
10% ± 20µs
Min. Rise Time
20µs (typical)
Current
Range
0~30A
0~300A
Resolution
10.3mA
82mA
Accuracy
0.4%F.S.
Measurement
Voltage Read Back
Range
0~16V
0~80V
Resolution
0.6mV
2.6mV
Accuracy
0.05%+0.05%F.S.
Current Read Back
Range
0~30A
0~300A
Resolution
1.3mA
11mA
Accuracy
0.1%+0.1%F.S.
Power Read Back
Range
0~1040W
0~10400W
Accuracy*7
0.3%+0.3%F.S.
General
Short Circuit
Current
30A
300A
1Ø 100/200Vac ± 10% VLN, 47~63Hz ;
Input Rating
1Ø 115/230Vac ± 10% VLN, 47~63Hz
Dimension
443.7 x 440 x 589 mm /
(H x W x D)
17.5 x 17.3 x 23.2 inch
Weight
90 kg / 198.24 lbs
Safety & EMC
CE
63208
63209
1560W
0~60A
15600W
0~600A
1560W
0~100A
15600W
0~1000A
0.5V @ 30A
1V @ 60A
0.5V @ 300A
1V @ 600A
0.5V @ 50A
1V @ 100A
0.5V @ 500A
1V @ 1000A
0~60A
21mA
0.1%+0.2%F.S.
0~600A
163mA
0.1%+0.2%F.S.
0~100A
34.2mA
0.1%+0.2%F.S.
0~1000A
274mA
0.1%+0.2%F.S.
0.0025~10Ω
110mS
0.22S+0.35% *5
0.22S+0.35%
0.125~500Ω
2.22mS
1.2S+0.1%
0.0044S+0.35%
0.0015~6Ω
186.5mS
0.373S+0.35% *5
0.373S+0.35%
0.075~300Ω
3.73mS
1.2S+0.1%
0.0075S+0.35%
0~16V
4mV
0~80V
20mV
0~16V
4mV
0~80V
20mV
0~80V
0~80V
0.05%+0.1%F.S.
0.05%+0.1%F.S.
1.2~1560W
12~15600W
22.5mW
225mW
0.5%+0.5%F.S.
2.5~1560W
20~15600W
31.255mW
250mW
0.5%+0.5%F.S.
0.025~10ms
1ms~30s
1µs
1ms
1µs+100ppm
1ms+100ppm
12mA~3A/µs
100mA~25A/µs
12mA/µs
100mA/µs
10% ± 20µs
20µs (typical)
0~60A
21mA
0~600A
163mA
0.025~10ms
1ms~30s
1µs
1ms
1µs+100ppm
1ms+100ppm
20mA~5A/µs
166mA~41.6A/µs
20mA/µs
166mA/µs
10% ± 20µs
20µs (typical)
0~100A
34.2mA
0~1000A
274mA
0.4%F.S.
0.4%F.S.
0~16V
0~80V
0.6mV
2.6mV
0.05%+0.05%F.S.
0~16V
0~80V
0.6mV
2.6mV
0.05%+0.05%F.S.
0~60A
2.7mA
0~100A
4.5mA
0~600A
21mA
0.1%+0.1%F.S.
0~1000A
36mA
0.1%+0.1%F.S.
0~1560W
0~15600W
0.3%+0.3%F.S.
0~1560W
0~15600W
0.3%+0.3%F.S.
60A
600A
1Ø 100/200Vac ± 10% VLN, 47~63Hz ;
1Ø 115/230Vac ± 10% VLN, 47~63Hz
762.8 x 546 x 700 mm /
30 x 21.5 x 27.6 inch
170 kg / 374.45 lbs
CE
100A
1000A
1Ø 100/200Vac ± 10% VLN, 47~63Hz ;
1Ø 115/230Vac ± 10% VLN, 47~63Hz
762.8x546x700mm/
30x21.5x27.6inch(cabinet)
170 kg / 374.45 lbs
CE
SPECIFICATIONS-4
Model
63210
Power *1
1450W
14500W
Current
0~15A
0~150A
Voltage*2
0~600V
1.5V @ 7.5A
1.5V @ 75A
Min. Operating
voltage
3V @ 15A
3V @ 150A
Constant Current mode
Range
0~15A
0~150A
Resolution
4.9mA
39mA
Accuracy
0.1%+0.1%F.S.
0.2%+0.1%F.S.
Constant Resistance Mode
Range
0.1~400Ω
5~20000Ω
Resolution*3
3.21mS
80.1µS
Accuracy *4
0.0128S+0.35%
0.092S+0.1%
Accuracy *6 (Vin>7V)
0.0128S+0.35%
317.7µS+0.35%
Constant Voltage mode
Range
0~150V
0~600V
Resolution
40mV
162mV
Accuracy
0.05%+0.1%F.S.
Constant Power mode
Range
5~1450W
50~14500W
Resolution
25mW
250mW
Accuracy
0.5%+0.5%F.S.
Dynamic mode
Timing
T1&T2
0.025~10ms
1ms~30s
Resolution
1µs
1ms
Accuracy
1µs+100ppm
1ms+100ppm
Slew rate
3mA~0.75A/µs
25mA~6A/µs
Resolution
3mA/µs
25mA/µs
Accuracy
10% ± 20µs
Min. Rise Time
150 µs (typical)
Current
Range
0~15A
0~150A
Resolution
4.9mA
39mA
Accuracy
0.4%F.S.
Measurement
Voltage Read Back
Range
0~150V
0~600V
Resolution
5.1mV
21mV
Accuracy
0.05%+0.05%F.S.
Current Read Back
Range
0~15A
0~150A
Resolution
0.64mA
5.1mA
Accuracy
0.1%+0.1%F.S.
Power Read Back
Range
0~1450W
0~14500W
Accuracy*7
0.3%+0.3%F.S.
General
Short Circuit
Current
15A
150A
1Ø 100/200Vac ± 10% VLN, 47~63Hz ;
Input Rating
1Ø 115/230Vac ± 10% VLN, 47~63Hz
Dimension
762.8x546x700mm/
(H x W x D)
30x21.5x27.6inch(cabinet)
Weight
170 kg / 374.45 lbs
Safety & EMC
CE
63211
63212
15600W
0~30A
15600W
0~150A
10000W
0~30A
5V @ 15A
10V @ 30A
5V @ 75A
10V @ 150A
5V @ 15A
10V @ 30A
5V @ 75A
10V @ 150A
0~30A
7.5mA
0.1%+0.1%F.S.
0~150A
37.5mA
0.2%+0.1%F.S.
0~30A
7.5mA
0.1%+0.1%F.S.
0~150A
37.5mA
0.2%+0.1%F.S.
0.2~200Ω
14.3mS
28.7mS+0.5%
--
8~8000Ω
360µS
715µS+0.5%
--
0.2~200Ω
14.3mS
28.7mS+0.5%
--
8~8000Ω
360µS
715µS+0.5%
--
10~1000V
10000W
0~150A
10~1000V
0~250V
0~1000V
62.5mV
250mV
0.05%+0.1%F.S.
0~250V
0~1000V
62.5mV
250mV
0.05%+0.1%F.S.
2.5~1560W
20~15600W
390mW
3.9W
0.5%+0.5%F.S.
2.5~1000W
20~10000W
25mW
2.5W
0.5%+0.5%F.S.
0.025~10ms
1ms~30s
1µs
1ms
1µs+100ppm
1ms+100ppm
5mA~1.25A/µs
25mA~6.25A/µs
5mA/µs
25mA/µs
10% ± 20µs
24 µs (typical)
0.025~10ms
1ms~30s
1µs
1ms
1µs+100ppm
1ms+100ppm
5mA~1.25A/µs
25mA~6.25A/µs
5mA/µs
25mA/µs
10% ± 20µs
24 µs (typical)
0~30A
0.6mA
0~150A
3mA
0~30A
0.6mA
0~150A
3mA
0.4%F.S.
0.4%F.S.
0~250V
0~1000V
5mV
20mV
0.05%+0.05%F.S.
0~250V
0~1000V
5mV
20mV
0.05%+0.05%F.S.
0~30A
0.6mA
0~30A
0.6mA
0~150A
3mA
0~150A
3mA
0.1%+0.1%F.S.
0.1%+0.1%F.S.
0~1560W
0~15600W
0.3%+0.3%F.S.
0~1000W
0~10000W
0.3%+0.3%F.S.
30A
150A
1Ø 100/200Vac ± 10% VLN, 47~63Hz ;
1Ø 115/230Vac ± 10% VLN, 47~63Hz
762.8x546x700mm/
30x21.5x27.6inch(cabinet)
170 kg / 374.45 lbs
CE
30A
150A
1Ø 100/200Vac ± 10% VLN, 47~63Hz ;
1Ø 115/230Vac ± 10% VLN, 47~63Hz
762.8x546x700mm/
30x21.5x27.6inch(cabinet)
170 kg / 374.45 lbs
CE
NOTE*1 : The power rating specifications at ambient temperature=25˚C and see the diagram below for power derating.
NOTE*2 : If the operating voltage exceeds the rated voltage for 1.1 times, it would cause permanent damage to the device.
NOTE*3 : S (siemens) is the SI unit of conductance, equal to one reciprocal ohm.
NOTE*4 : The Vin must be greater than min. operating voltage of each model.
NOTE*5 : Setting error will be 1% for R<0.005Ω at CRL range.
NOTE*6 : The Vin must be greater than 7V of each model.
NOTE*7 : Power F.S. = Vrange x Irange F.S.
SELECTION GUIDE
Power
Model
Voltage
80V
600V
1000V
2600W
5200W
6500W
10000W
10400W
14500W
15600W
63201
63202
--
63203
63204
--
63205
---
--63212
63206/63207
---
-63210
--
63208/63209
-63211
NUMBER OF PARALLEL LOAD UNITS AND RATING
Model
Rating
63201
63202
63203
63204
63205
63206
600A/5.2kW
900A/7.8kW
1200A/10.4kW
1500A/13kW
1800A/15.6kW
100A/5.2kW
150A/7.8kW
200A/10.4kW
250A/13kW
300A/15.6kW
1200A/10.4kW
1800A/15.6kW
2400A/20.8kW
3000A/26kW
3600A/31.2kW
200A/10.4kW
300A/15.6kW
400A/20.8kW
500A/26kW
600A/31.2kW
360A/13kW
540A/19.5kW
720A/26kW
900A/32.5kW
1080A/39kW
1200A/20.8kW
1800A/31.2kW
2400A/41.6kW
3000A/52kW
3600A/62.4kW
63207
63208
63209
63210
63211
63212
600A/20.8kW
900A/31.2kW
1200A/41.6kW
1500A/52kW
1800A/62.4kW
1200A/31.2kW
1800A/46.8kW
2400A/62.4kW
3000A/78kW
3600A/93.6kW
2000A/31.2kW
3000A/46.8kW
4000A/62.4kW
5000A/78kW
6000A/93.6kW
300A/29kW
450A/43.5kW
600A/58kW
750A/72.5kW
900A/87kW
300A/31.2kW
450A/46.8kW
600A/62.4kW
750A/78kW
900A/93.6kW
300A/20kW
450A/30kW
600A/40kW
750A/50kW
900A/60kW
Units
2
3
4
5
6
Model
Rating
Units
2
3
4
5
6
ORDERING INFORMATION
63201 : DC Electronic Load 80V/300A/2.6kW
63202 : DC Electronic Load 600V/50A/2.6kW
63203 : DC Electronic Load 80V/600A/5.2kW
63204 : DC Electronic Load 600V/100A/5.2kW
63205 : DC Electronic Load 80V/180A/6.5kW
63206 : DC Electronic Load 80V/600A/10.4kW
63207 : DC Electronic Load 80V/300A/10.4kW
63208 : DC Electronic Load 80V/600A/15.6kW
63209 : DC Electronic Load 80V/1000A/15.6kW
63210 : DC Electronic Load 600V/150A/14.5kW
63211 : DC Electronic Load 1000V/150A/15.6kW
63212 : DC Electronic Load 1000V/150A/10kW
A632001 : Remote Controller
A632002 : Load Cable 38mm/242A/200cmx2
A632003 : Load Cable 80mm/390A/200cmx2
A632004 : Sync. Link Box for 6330A & 63200 series
A632005 : Softpanel for 63200 series
A632006 : NI USB-6211 Bus-Powered Multifunction DAQ
A632001
A632004
A632006
Power Rating
100%
77%
˚C
5
Developed and Manufactured by :
HEADQUARTERS
CHROMA ATE INC.
CHINA
66 Hwaya 1st Rd., Kueishan
CHROMA ELECTRONICS
Hwaya Technology Park,
(SHENZHEN) CO., LTD.
Taoyuan County 33383,
8F, No.4, Nanyou Tian An
Taiwan
Industrial Estate, Shenzhen,
Tel: +886-3-327-9999
China PC: 518052
Fax: +886-3-327-8898
Tel: +86-755-2664-4598
http://www.chromaate.com
Fax: +86-755-2641-9620
E-mail: [email protected]
15
25
35
Ambient Temperature
Worldwide Distribution and
Service Network
JAPAN
CHROMA JAPAN CORP.
472 Nippa-cho, Kouhoku-ku,
Yokohama-shi, Kanagawa,
223-0057 Japan
Tel: +81-45-542-1118
Fax: +81-45-542-1080
http://www.chroma.co.jp
E-mail: [email protected]
U.S.A.
CHROMA SYSTEMS
SOLUTIONS, INC.
19772 Pauling, Foothill Ranch,
CA 92610
Tel: +1-949-600-6400
Fax: +1-949-600-6401
http://www.chromausa.com
E-mail: [email protected]
EUROPE
CHROMA ATE EUROPE B.V.
Morsestraat 32, 6716 AH Ede,
The Netherlands
Tel: +31-318-648282
Fax: +31-318-648288
http://www.chromaeu.com
E-mail: [email protected]
63200-E-201408-1000
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement