Samsung CLP-310, N, W, CLP-315, N, W Color Laser Printer User's Guide
Below you will find brief information for Color Laser Printer CLP-310, Color Laser Printer CLP-310N, Color Laser Printer CLP-310W. This machine is equipped with a number of special features that improve the quality of the documents you print. You can print in a full range of colors using cyan, magenta, yellow, and black. Your machine prints A4-sized paper at up to 16 ppm, letter-sized paper at up to 17 ppm in gray scale mode and 4 ppm in color mode.
Advertisement
Advertisement
Color Laser Printer
User’s Guide
CLP-310 Series
imagine the possibilities
Thank you for purchasing a Samsung product.
To receive a more complete service, please register your product at www.samsung.com/global/register
features of your new laser product
Your new machine is equipped with a number of special features that improve the quality of the documents you print.
With the machine, you can:
SPECIAL FEATURES
Print with excellent quality and speed
• You can print in a full range of colors using cyan, magenta, yellow, and black.
• You can print with a resolution of up to 2400 x 600 dpi
Effective output.
• Your machine prints A4-sized paper at up to 16 ppm, lettersized paper at up to 17 ppm in gray scale mode and 4 ppm in color mode.
Handle many different types of printable material
• The 150-sheet tray supports plain paper in various sizes, letterhead, envelopes, labels, custom-sized media, postcards, and heavy paper.
Create professional documents
• Print watermarks. You can customize your documents with words, such as “Confidential”. See Software section.
• Print posters. The text and pictures of each page of your document are magnified and printed across the sheet of paper and can then be taped together to form a poster. See
Software section.
• You can use preprinted forms and letterhead with plain paper. See Software section.
Save time and money
• To save paper, you can print multiple pages on one single sheet of paper.
• This machine automatically conserves electricity by substantially reducing power consumption when not in use.
.
Print in various environments
• You can print with Windows 2000 and Windows XP/2003/
Vista as well as Linux and Macintosh systems.
• Your machine is equipped with a USB interface and a network interface (CLP-310N, CLP-310W, CLP-315N,
CLP-315W only).
2_Features of your new laser product
FEATURES BY MODELS
The machine is designed to support all of your document needs – from printing, to more advanced networking solutions for your business.
Basic features of this machine include;
FEATURES
USB 2.0
Network Interface 802.11b/g wireless LAN
Network Interface Enthernet 10/100 Base TX wired LAN
Duplex (2-sided) printing (Manual)
CLP-310/CLP-315 CLP-310N/CLP-315N CLP-310W/CLP-315W
( : Included, O: Optional, Blank: Not Available)
ABOUT THIS USER’S GUIDE
This user’s guide provides information about basic understanding of the machine as well as detailed explanation on each step during the actual usage. Both novice users and professional users can refer to this guide for installing and using the machine.
Some terms in this guide are used interchangeably, as below:
• Document is synonymous with original.
• Paper is synonymous with media, or print media.
Following table offers the conventions of this guide:
Bold
Note
CONVENTION
Caution
Footnote
(See page 1 for more information)
DESCRIPTION
Used for texts on the display or actual prints on the machine.
Used to provide additional information or detailed specification of the machine function and feature.
Used to give users information to protect the machine from possible mechanical damage or malfunction.
Start
EXAMPLE
The date format may differ from country to country
Do not touch the green underside of the toner cartridge.
Used to provide more detailed information on certain words or a phrase. a. pages per minute
Used to guide users to the reference page for the additional detailed information.
(See page 1 for more information)
Features of your new laser product_3
FINDING MORE INFORMATION
You can find information for setting up and using your machine from the following resources, either as a print-out or onscreen.
Quick Install Guide
Provides information on setting up your machine and this requires that you follow the instructions in the guide to prepare the machine.
Online User’s Guide
Provides you with step-by-step instructions for using your machine’s full features, and contains information for maintaining your machine, troubleshooting, and installing accessories.
This user’s guide also contains a Software section to provide you with information on how to print documents with your machine in various operating systems, and how to use the included software utilities.
Printer Driver Help
Note
You can access the user’s guide in other languages from the Manual folder on the printer software CD.
Provides you with help information on printer driver properties and instructions for setting up the properties for printing. To access a printer driver help screen, click Help from the printer properties dialog box.
Samsung website
If you have Internet access, you can get help, support, printer drivers, manuals, and order information from the Samsung website, www.samsungprinter.com
.
4_Features of your new laser product
safety information
IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS
What the icons and signs in this user’s guide mean:
Hazards or unsafe practices that may result in severe personal injury or death.
WARNING
Hazards or unsafe practices that may result in minor personal injury or property damage.
CAUTION
To reduce the risk of fire, explosion, electric shock, or personal injury when using your laser MFP, follow these basic safety precautions:
CAUTION
Do NOT attempt.
Do NOT disassemble.
Do NOT touch.
Follow directions explicitly.
Unplug the power plug from the wall socket.
Make sure the MFP is grounded to prevent electric shock.
Call the service center for help.
These warning signs are here to prevent injury to you and others. Follow them explicitly. After reading this section, keep it in a safe place for future reference.
1. Read and understand all instructions.
2. Use common sense whenever operating electrical appliances.
3. Follow all warnings and instructions marked on the machine and in the literature accompanying the machine.
4. If an operating instruction appears to conflict with safety information, heed the safety information. You may have misunderstood the operating instruction. If you cannot resolve the conflict, contact your sales or service representative for assistance.
5. Unplug the machine from the AC wall socket and/or telephone jack before cleaning. Do not use liquid or aerosol cleaners. Use only a damp cloth for cleaning.
6.
Do not plac e the machine on an unstable cart, stand or table. It may fall, causing serious damage.
7. Your machine should never be placed on, near or over a radiator, heater, air conditioner or ventilation duct.
8. Do not allow anything to rest on the power. Do not locate your machine where the cords will be abused by persons walking on them.
9. Do not overload wall outlets and extension cords. This can diminish performance, and may result in the risk of fire or electric shock.
10. Do not allow pets to chew on the AC power, telephone or PC interface cords.
11. Never push objects of any kind into the machine through case or cabinet openings. They may touch dangerous voltage points, creating a risk of fire or shock. Never spill liquid of any kind onto or into the machine.
12. To reduce the risk of electric shock, do not disassemble the machine. Take it to a qualified service technician when repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly could cause electric shock when the unit is subsequently used.
Safety information_5
13. Unplug the machine from the telephone jack, PC and AC wall outlet and refer servicing to qualified service personnel under the following conditions:
• When any part of the power cord, plug or connecting cable is damaged or frayed.
• If liquid has been spilled into the machine.
• If the machine has been exposed to rain or water.
• If the machine does not operate properly after instructions have been followed.
• If the machine has been dropped, or the cabinet appears damaged.
• If the machine exhibits a sudden and distinct change in performance.
14. Adjust only those controls covered by the operating instructions. Improper adjustment of other controls may result in damage, and may require extensive work by a qualified service technician to restore the machine to normal operation.
15. Avoid using this machine during a lightning storm. There may be a remote risk of electric shock from lightning. If possible, unplug the
AC power and telephone cord for the duration of the lightning storm.
16. The Power cord supplied with your machine should be used for safe operation. If you are using a cord which is longer than 2 m with
110 V machine, then it should be 16 AWG a
or bigger.
17. Use only No.26 AWG or larger telephone line cord.
18. SAVE THESE INSTRUCTIONS
a. AWG: American Wire Gauge
LASER SAFETY STATEMENT
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 825.
Class I laser products are not considered to be hazardous. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance or prescribed service condition.
WARNING
Never operate or service the printer with the protective cover removed from Laser/Scanner assembly. The reflected beam, although invisible, can damage your eyes.
When using this product, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to persons:
6_Safety information
OZONE SAFETY
During normal operation, this machine produces ozone. The ozone produced does not present a hazard to the operator. However, it is advisable that the machine be operated in a well ventilated area.
If you need additional information about ozone, request your nearest Samsung dealer.
MERCURY SAFETY
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE
OR FEDERAL LAWS. For details see lamprecycle.org, eiae.org, or call 1-800-Samsung
POWER SAVER
This printer contains advanced energy conservation technology that reduces power consumption when it is not in active use.
When the printer does not receive data for an extended period of time, power consumption is automatically lowered.
ENERGY STAR and the ENERGY STAR mark are registered U.S. marks.
For more information on the ENERGY STAR program see http://www.energystar.gov
RECYCLING
Recycle or dispose of the packaging material for this product in an environmentally responsible manner.
CORRECT DISPOSAL OF THIS PRODUCT (WASTE ELECTRICAL & ELECTRONIC EQUIPMENT)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
RADIO FREQUENCY EMISSIONS
FCC Information to the User
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Safety information_7
• Consult the dealer or experienced radio TV technician for help.
Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
Canadian Radio Interference Regulations
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry and Science Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de Classe B prescrites dans la norme sur le matériel brouilleur: “Appareils Numériques”, ICES-003 édictée par l’Industrie et Sciences Canada.
UNITED STATES OF AMERICA
Federal Communications Commission (FCC)
Intentional emitter per FCC Part 15
Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in your printer system. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for use in the United States of America if an FCC ID number is on the system label.
The FCC has set a general guideline of 20 cm (8 inches) separation between the device and the body, for use of a wireless device near the body (this does not include extremities). This device should be used more than 20 cm (8 inches) from the body when wireless devices are on.
The power output of the wireless device (or devices), which may be embedded in your printer, is well below the RF exposure limits as set by the FCC.
This transmitter must not be collocated or operation in conjunction with any other antenna or transmitter.
Operation of this device is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation of the device.
Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Contact manufacturer for service.
FCC Statement for Wireless LAN use:
While installing and operating this transmitter and antenna combination the radio frequency exposure limit of 1mW/cm2 may be exceeded at distances close to the antenna installed. Therefore, the user must maintain a minimum distance of 20cm from the antenna at all times. This device cannot be colocated with another transmitter and transmitting antenna.
FAX BRANDING
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone facsimile machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission the following information:
(1) the date and time of transmission
(2) identification of either business, business entity or individual sending the message; and
(3) telephone number of either the sending machine, business, business entity or individual.
The Telephone Company may make changes in its communications facilities, equipment operations or procedures where such action is reasonably required in the operation of its business and is not inconsistent with the rules and regulations in FCC Part 68. If such changes can be reasonably expected to render any customer terminal equipment incompatible with telephone company communications facilities, or require modification or alteration of such terminal equipment, or otherwise materially affect its use or performance, the customer shall be given adequate notice in writing, to allow the customer an opportunity to maintain uninterrupted service
8_Safety information
RINGER EQUIVALENCE NUMBER
The Ringer Equivalence Number and FCC Registration Number for this machine may be found on the label located on the bottom or rear of the machine. In some instances you may need to provide these numbers to the telephone company.
The Ringer Equivalence Number (REN) is a measure of the electrical load placed on the telephone line, and is useful for determining whether you have “overloaded” the line. Installing several types of equipment on the same telephone line may result in problems making and receiving telephone calls, especially ringing when your line is called. The sum of all Ringer Equivalence Numbers of the equipment on your telephone line should be less than five in order to assure proper service from the telephone company. In some cases, a sum of five may not be usable on your line. If any of your telephone equipment is not operating properly, you should immediately remove it from your telephone line, as it may cause harm to the telephone network.
FCC Regulations state that changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. In the event that terminal equipment causes harm to the telephone network, the telephone company should notify the customer that service may be stopped. However, where prior notice is impractical, the company may temporarily cease service, providing that they: a) promptly notify the customer.
b) give the customer an opportunity to correct the equipment problem.
c) inform the customer of the right to bring a complaint to the Federal Communication Commission pursuant to procedures set out in
FCC Rules and Regulations Subpart E of Part 68.
You should also know that:
• Your machine is not designed to be connected to a digital PBX system.
• If you intend to use a computer modem or fax modem on the same phone line as your machine, you may experience transmission and reception problems with all the equipment. It is recommended that no other equipment, except for a regular telephone, share the line with your machine.
• If your area experiences a high incidence of lightning or power surges, we recommend that you install surge protectors for both the power and the telephone lines. Surge protectors can be purchased from your dealer or telephone and electronic specialty stores.
• When programming emergency numbers and/or making test calls to emergency numbers, use a non-emergency number to advise the emergency service dispatcher of your intentions. The dispatcher will give you further instructions on how to actually test the emergency number.
• This machine may not be used on coin service or party lines.
• This machine provides magnetic coupling to hearing aids.
You may safely connect this equipment to the telephone network by means of a standard modular jack, USOC RJ-11C.
Safety information_9
REPLACING THE FITTED PLUG (FOR UK ONLY)
Important
The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do not use the plug until you have another fuse cover.
Contact the people from you purchased the machine.
The 13 amp plug is the most widely used type in the UK and should be suitable. However, some buildings (mainly old ones) do not have normal 13 amp plug sockets. You need to buy a suitable plug adaptor. Do not remove the moulded plug.
If you cut off the moulded plug, get rid of it straight away.
You cannot rewire the plug and you may receive an electric shock if you plug it into a socket.
Important warning:
You must earth this machine.
The wires in the mains lead have the following color code:
• Green and Yellow: Earth
• Blue: Neutral
• Brown: Live
If the wires in the mains lead do not match the colors marked in your plug, do the following:
You must connect the green and yellow wire to the pin marked by the letter “E” or by the safety ‘Earth symbol’ or colored green and yellow or green.
You must connect the blue wire to the pin which is marked with the letter “N” or colored black.
You must connect the brown wire to the pin which is marked with the letter “L” or colored red.
You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.
DECLARATION OF CONFORMITY (EUROPEAN COUNTRIES)
Approvals and Certifications
The CE marking applied to this product symbolizes Samsung Electronics Co., Ltd. Declaration of Conformity with the following applicable 93/
68/EEC Directives of the European Union as of the dates indicated:
January 1, 1995: Council Directive 73/23/EEC Approximation of the laws of the member states related to low voltage equipment.
January 1, 1996: Council Directive 89/336/EEC (92/31/EEC), approximation of the laws of the Member States related to electromagnetic compatibility.
March 9, 1999: Council Directive 1999/5/EC on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity. A full declaration, defining the relevant Directives and referenced standards can be obtained from your Samsung Electronics
Co., Ltd. representative.
EC Certification
Certification to 1999/5/EC Radio Equipment & Telecommunications Terminal Equipment Directive (FAX)
This Samsung product has been self-certified by Samsung for pan-European single terminal connection to the analogue public switched telephone network (PSTN) in accordance with Directive 1999/5/EC. The product has been designed to work with the national PSTNs and compatible PBXs of the European countries:
In the event of problems, you should contact the Euro QA Lab of Samsung Electronics Co., Ltd. in the first instance.
The product has been tested against TBR21. To assist in the use and application of terminal equipment which complies with this standard, the
European Telecommunication Standards Institute (ETSI) has issued an advisory document (EG 201 121) which contains notes and additional requirements to ensure network compatibility of TBR21 terminals. The product has been designed against, and is fully compliant with, all of the relevant advisory notes contained in this document.
10_Safety information
European Radio Approval Information
(for products fitted with EU-approved radio devices)
Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz band, may be present (embedded) in your printer system which is intended for home or office use. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for use in the European Union or associated areas if a CE mark with
Notified Body Registration Number and the Alert Symbol is on the system label.
a
The power output of the wireless device or devices that may be embedded in you printer is well below the RF exposure limits as set by the
European Commission through the R&TTE directive.
European States qualified under wireless approvals:
EU
Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France (with frequency restrictions),
Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, The Netherlands, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden and the U.K.
EEA/EFTA countries
Iceland, Liechtenstein, Norway and Switzerland
European States with restrictions on use:
EU
In France, the frequency range is restricted to 2446.5-2483.5 MHz for devices above 10 mW transmitting power such as wireless
EEA/EFTA countries
No limitations at this time.
REGULATORY COMPLIANCE STATEMENTS
Wireless Guidance
Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in your printer system. The following section is a general overview of considerations while operating a wireless device.
Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections). The wireless devices in your system are only qualified for use in the countries identified by the Radio Approval Marks on the system rating label. If the country you will be using the wireless device in, is not listed, contact your local Radio Approval agency for requirements. Wireless devices are closely regulated and use may not be allowed.
The power output of the wireless device or devices that may be embedded in your printer is well below the RF exposure limits as known at this time. Because the wireless devices (which may be embedded into your printer) emit less energy than is allowed in radio frequency safety standards and recommendations, manufacturer believes these devices are safe for use. Regardless of the power levels, care should be taken to minimize human contact during normal operation.
As a general guideline, a separation of 20 cm (8 inches) between the wireless device and the body, for use of a wireless device near the body
(this does not include extremities) is typical. This device should be used more than 20 cm (8 inches) from the body when wireless devices are on and transmitting.
This transmitter must not be collocated or operation in conjunction with any other antenna or transmitter.
Some circumstances require restrictions on wireless devices. Examples of common restrictions are listed below:
Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations require wireless devices to be turned off while traveling in an airplane. IEEE 802.11 (also known as wireless Ethernet) and Bluetooth communication devices are examples of devices that provide wireless communication.
In environments where the risk of interference to other devices or services is harmful or perceived as harmful, the option to use a wireless device may be restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden atmospheres are limited examples where use of wireless devices may be restricted or eliminated. When in environments where you are uncertain of the sanction to use wireless devices, ask the applicable authority for authorization prior to use or turning on the wireless device.
Every country has different restrictions on the use of wireless devices. Since your system is equipped with a wireless device, when traveling between countries with your system, check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of a wireless device in the destination country.
If your system came equipped with an internal embedded wireless device, do not operate the wireless device unless all covers and shields are in place and the system is fully assembled.
Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Contact manufacturer for service.
Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or contact manufacturer Technical Support for additional information.
Safety information_11
OPENSSL LICENSE
Copyright (c) 1998-2001 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without
5. prior written permission. For written permission, please contact [email protected].
6. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project.
7. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the
OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)"
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young([email protected]). This product includes software written by Tim
Hudson ([email protected]).
ORIGINAL SSLEAY LICENSE
Copyright (C) 1995-1998 Eric Young ([email protected]) All rights reserved.
This package is an SSL implementation written by Eric Young ([email protected]). The implementation was written so as to conform with
Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson ([email protected]). Copyright remains Eric
Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software written by Eric Young ([email protected])" The word 'cryptographic' can be left out if the rouines from the library being used are not cryptographic related:-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product includes software written by Tim Hudson ([email protected])"
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.
12_Safety information
Declaration of Conformity
For the following product:
Manufactured at:
of Samsung Electronics Co., Ltd.
#259, Gongdan-Dong, Gumi-City, Gyeongsangbuk-Do, 730-030 Korea
of Samsung Electronics(Shandong) Digital Printing Co., Ltd.
264209, Samsung Road, Weihai Hi-Tech IDZ, Shandong Province, China
(Factory name, address)
We hereby declare, that the product above is in compliance with the essential requirements of the
Low Voltage Directive (2006/95/EC) and EMC Directive (2004/108/EC) by application of:
EN60950-1:2001+A11:2004
EN55022:1998+A1:2000+A2:2003
EN61000-3-2:2000+A2:2005
EN61000-3-3:1995+A1:2001
EN55024:1998+A1:2001+A2:2003
The Technical documentation is kept at the below Manufacturer’s address.
Manufacturer
#259, Gongdan-Dong, Gumi-City
Gyungbuk, Korea 730-030
March 11,2008
Representative in the EU:
Samsung Electronics Euro QA Lab.
Blackbushe Business Park
Saxony Way, Yateley, Hampshire
GU46 6GG, UK
March 11,2008
(Place and date of issue)
Yong Sang Park / S. Manager
(Name and signature of authorized person)
Declaration of Conformity
For the following product:
Manufactured at:
of Samsung Electronics Co., Ltd.
#259, Gongdan-Dong, Gumi-City, Gyeongsangbuk-Do, 730-030 Korea of Samsung Electronics(Shandong) Digital Printing Co., Ltd.
264209, Samsung Road, Weihai Hi-Tech IDZ, Shandong Province, China
(Factory name, address)
We hereby declare, that the product above is in compliance with the essential requirements of the
R&TTE Directive (1995/5/EC) by application of:
EN 60950-1:2001+A11:2004
EN 55022:1998 + A1:2000 + A2:2003
EN 55024:1998 + A1:2001 + A2:2003
EN 61000-3-2:2000 + A2:2005
EN 61000-3-3:1995 + A1:2001
EN 301 489-1 V1.6.1(2005-09),
EN 301 489-17 V1.2.1(2002-08)
EN 300 328 V1.7.1 (2006-10)
The Technical documentation is kept at the below Manufacturer’s address.
Manufacturer
Samsung Electronics Co., Ltd.
#259, Gongdan-Dong, Gumi-City
Gyungbuk, Korea 730-030
Sung-Hwan Baek / S. Manager
May 15, 2008
Representative in the EU:
Samsung Electronics Euro QA Lab.
Blackbushe Business Park
Saxony Way, Yateley, Hampshire
GU46 6GG, UK
May 15, 2008
(Place and date of issue)
Yong Sang Park / S. Manager
Safety information_13
contents
2 Features of your new laser product
INTRODUCTION
16
18 Understanding the control panel
GETTING STARTED
20
21 Supported operation environments
Installing the driver software
23 Using a wireless network(CLP-310W, CLP-315W only)
Checking your Network Environments
Restoring factory default settings
Configuring the machine’s wireless network
Installing the driver software
SELECTING AND LOADING PRINT MEDIA
28
Guidelines for special print media
31 Changing the size of the paper in the paper tray
33 Printing on special print materials
33 Adjusting the output support
33 Setting the paper size and type
BASIC PRINTING
34
14_Contents
contents
MAINTENANCE
35
38 Replacing the toner cartridge
40 Replacing the waste toner container
41 Managing your machine from the website
41 To access SyncThru™ Web Service:
TROUBLESHOOTING
42
42 Tips for avoiding paper jams
ORDERING SUPPLIES AND ACCESSORIES
50
SPECIFICATIONS
51
GLOSSARY
53
INDEX
57
CONTACT SAMSUNG WORLDWIDE
59
Contents_15
introduction
These are the main components of your machine:
This chapter includes:
•
•
•
Understanding the control panel
PRINTER OVERVIEW
Front view
•
•
Rear view
1
2
3
Rear cover release button
Power switch
Network port
a
4
USB port
Power receptacle
5
6
Rear cover
a. CLP-310N, CLP-310W, CLP-315N, CLP-315W only.
6
7
4
5
8
9
‘
10
1
2
3
Top cover
Output tray (face down)
Control panel
Tray
Output support
Front cover release button
Front cover
Toner cartridge
Waste toner container
Imaging unit
16 _Introduction
CONTROL PANEL OVERVIEW
3
4
1
2 wireless LED status LED stop toner colors
Shows the status of wireless network. When the LED on, the machine is ready. (Wireless models only)
Introduction_ 17
UNDERSTANDING THE CONTROL PANEL
The color of the status and toner colors LED indicates the machine's current status.
LEDs
STATUSD LED lights green slowly blinks green fast blinks green lights red lights orange
TONER COLORS LED all LEDs off all LEDs off all LEDs off all LEDs off all LEDs off
DESCRIPTION
The machine is ready to print.
The machine is receiving data from the computer.
The machine is printing data.
• The machine is experiencing an error, such as open cover, empty paper, not installed waste toner container, or full waste toner container.
• The machine is experiencing a service required error, such as LSU error, fuser error, or ITB error, Contact your sales or service representative.
• The machine is experiencing an error such as jammed paper.
• While the machine is booting up, do not open a top cover, since the machine may treat it as an error such as paper jam. In this case, open a front cover and close it then, the machine will reboot up.
lights green blinks red lights red lights green each LED blinks red each LED lights red
Each toner cartridge is near the end of its life.
Each toner cartridge is almost empty. You can print, but the quality is not reliable.
each LED lights red each LED blinks red in a repeated order
• Each toner cartridge is totally exhausted. You can not print.
• Each toner cartridge is wrong.
The machine is warming up.
All printing errors will be appear in the Smart Panel program window.
Stop button
STATUS LED
Printing demo page
Printing configuration sheets
Canceling print job
DESCRIPTION
In Ready mode, press and hold this button for about 2 seconds until the status LED blinks slowly, and release.
In Ready mode, press and hold this button for about 5 seconds until the status LED blinks fast, and release.
Press this button during printing. The red LED blinks while the print job is cleared from both the machine and the computer, and then the machine returns to ready mode. This may take some time depending on the size of the print job.
18 _Introduction
SUPPLIED SOFTWARE
You must install the printer software using the supplied CD after you have set up your machine and connected it to your computer. CD provides you with the following software.
CD
Printer software CD
CONTENTS
Windows • Printer driver: Use this driver to take full advantage of your printer’s features.
• Smart Panel: This program allows you to monitor the machine’s status and alerts you when an error occurs during printing.
• SetIP: Use this program to set your machine’s TCP/IP addresses. (CLP-
310N, CLP-310W, CLP-315N, CLP-
315W only).
Linux • Printer driver: Use this driver to run your machine from a Linux computer and print documents.
• Smart Panel: This program allows you to monitor the machine’s status and alerts you when an error occurs during printing.
Macintosh • Printer driver: Use this driver to run your machine from a Macintosh computer and print documents.
• Smart Panel: This program allows you to monitor the machine’s status and alerts you when an error occurs during printing.
PRINTER DRIVER FEATURES
Your printer drivers support the following standard features:
• Paper orientation, size, source and media type selection
• Number of copies
In addition, you can use various special printing features. The following table shows a general overview of features supported by your printer drivers:
Some models or operating system may not support the certain feature(s) in the following table.
Printer driver
FEATURE
Color mode
WINDOWS
O
LINUX
O
MACINTOSH
O
Machine quality option
Poster printing
Multiple pages per sheet
(N-up)
Fit to page printing
Scale printing
Watermark
Overlay
Duplex (Manual)
O
O
O
O
O
O
O
O
O
X
O (2, 4)
X
X
X
X
X
O
O
X
X
X
O
X
O
Introduction_ 19
getting started
This chapter gives you step-by-step instructions for setting up the machine.
This chapter includes:
•
•
•
•
•
•
Using a wireless network(CLP-310W, CLP-315W only)
•
SETTING UP THE HARDWARE
This section shows the steps to set up the hardware which is explained in the Quick Install Guide. Make sure you read Quick Install Guide and complete following steps.
1. Select a stable location.
Select a level, stable place with adequate space for air circulation. Allow extra space to open covers and trays.
The area should be well-ventilated and away from direct sunlight or sources of heat, cold, and humidity. Do not set the machine close to the edge of your desk or table.
4. Load paper. (See "Changing the size of the paper in the paper tray" on page 31.)
5. Make sure that all the cables are connected to the machine.
6. Turn the machine on.
When you move the machine, do not tilt or turn it upside down.
Otherwise, the inside of the machine may be contaminated by toner, which can cause damage to the machine or bad print quality.
Printing is suitable for altitudes under 1,000 m (3,281 ft). Refer to the
Place the machine on a flat and stable surface, not letting it lean more than 2 mm (0.08 inches). Otherwise, it may affect the printing quality.
2. Unpack the machine and check all the enclosed items.
3. Remove the tape holding the machine tightly.
PRINTING A DEMO PAGE
Print a demo page to make sure that the machine is operating correctly.
To print a demo page:
In ready mode, press and hold the Stop button for about 2 seconds.
SYSTEM REQUIREMENTS
Before you begin, ensure that your system meets the following requirements:
Windows
Your machine supports the following Windows operating systems.
REQUIREMENT (RECOMMENDED)
OPERATING
SYSTEM
Windows
2000
Windows XP
Windows
Server 2003
Windows
Vista
Windows
Server 2008
CPU
Pentium II 400 MHz
(Pentium III 933 MHz)
Pentium III 933 MHz
(Pentium IV 1 GHz)
Pentium III 933 MHz
(Pentium IV 1 GHz)
Pentium IV 3 GHz
Pentium IV 1 GHz
(Pentium IV 2 GHz)
RAM
128 MB
(256 MB)
128 MB
(256 MB)
128 MB
(512 MB)
FREE HDD
SPACE
600 MB
1.5 GB
1.25 GB to
2 GB
512 MB
(1024 MB)
15 GB
512 MB
(2048 MB)
10 GB
• Internet Explorer 6.0 or higher is the minimum requirement for all
Windows operating systems.
• Users who have an administrator right can install the software.
• Windows Terminal Services is compatable with this machine.
20 _Getting started
Macintosh
REQUIREMENT (RECOMMENDED)
OPERATING
SYSTEM
Mac OS X
10.3 ~ 10.4
CPU RAM
FREE
HDD
SPACE
• Intel Processor
• Power PC G4 /
G5
• 128 MB for a
Power-PC based
Mac (512 MB).
• 512 MB for an
Intel-based Mac (1
GB)
1 GB
Mac OS X 10.5
• Intel Processor
• 867 MHz or faster Power
PC G4 /G5
512 MB (1 GB) 1 GB
Linu
x
ITEM REQUIREMENTS
Operating system
RedHat 8.0, 9.0 (32bit)
RedHat Enterprise Linux WS 4, 5 (32/64bit)
Fedora Core 1~7 (32/64bit)
Mandrake 9.2 (32bit), 10.0, 10.1 (32/64bit)
Mandriva 2005, 2006, 2007 (32/64bit)
SuSE Linux 8.2, 9.0, 9.1 (32bit)
SuSE Linux 9.2, 9.3, 10.0, 10.1, 10.2 (32/64bit)
SuSE Linux Enterprise Desktop 9, 10 (32/64bit)
Ubuntu 6.06, 6.10, 7.04 (32/64bit)
Debian 3.1, 4.0 (32/64bit)
CPU
Pentium IV 2.4GHz (IntelCore2)
RAM
Free HDD space
512 MB (1024 MB)
1 GB (2GB)
SETTING UP THE NETWORK
You need to set up the network protocols on the machine (;printer) to use it in the network environment. If you use your machine in the wired network, refer to 'Using a wired network'. If you use your network printer in the
wireless network, refer to "Using a wireless network(CLP-310W, CLP-315W only)" on page 23.
Supported operation environments
The following table shows the network environments supported by the machine:
ITEM
Network interface
Network operating system
Network protocols
REQUIREMENTS
• Ethernet 10/100 Base-TX (CLP-
310N, CLP-310W, CLP-315N, CLP-
315W only)
• IEEE 802.11 b/g Wireless LAN (CLP-
310W, CLP-315W only)
• Windows 2000/XP/2003/Vista
• Various Linux OS
• Mac OS 10.3 ~ 10.5
• TCP/IP
• Standard TCP/IP
• LPR
• IPP/HTTP
• Bonjour
• DHCP
• BOOTP
USING A WIRED NETWORK
You must set up the network protocols on your printer to use it on your network. This chapter will show you how this is easily accomplished.
Printing Configuration report
You can print a Network Configuration Report from the machine's control panel that will show the current machine’s network settings. This will help you to set up a network and troubleshooting problems.
To print the report, you need to press and hold Stop for about 5 seconds.
Please review your machines User's Guide to learn of more details. Using this Network Configuration Report, you can find your machine’s MAC address and IP address.
For example:
MAC Address : 00:15:99:41:A2:78
IP Address : 192.0.0.192
Setting IP address
Firstly, you have to set up an IP address for network printing and managements. In most cases a new IP address will be automatically assigned by a DHCP (Dynamic Host Configuration Protocol Server) located on the network.
In a few situations the IP address must be set manually. This is called a static IP and is often required in corporate Intranets for security reasons.
Getting started_ 21
• DHCP IP assignment: Connect your machine to the network, and wait a few minutes for the DHCP server to assign an IP address to the machine. Then, print the Network Configuration Report as explained above. If the report shows that the IP address has changed, the assignment was successful. You will see the new IP address on the report.
• Static IP assignment: Use SetIP program to change the IP address from your computer.
In an office environment, we recommend that you contact a network administrator to set this address for you.
IP setting using the SetIP program
The following procedure is based on Windows XP.
This program is for manually setting the network IP address of your machine using its MAC address to communicate with the machine. MAC address is a hardware serial number of the network interface and can be found in the Network Configuration Report.
• You only need to run this program if your network requires a static IP address. Otherwise, you may proceed to the
Configuring the machine’s wireless network part of this document. If you are unsure of this requirement ask the system administrator or the person who has set up your local network.
• You can only use the SetIP program when your machine is connected to a network or directly connected to a PC with the crossover network cable included with your machine. In most cases we recommend using the crossover cable. You will be asked to connect this cable in a moment.
Installing the program
1. Insert the Printer Software CD-ROM provided with your machine.
When the driver CD runs automatically, close that window.
2. Start a web browser such as Internet Explorer and open the X drive.
(X represents your CD-ROM drive.)
3. Double-click Application > SetIP.
4. Double-click Setup.exe to install this program.
5. Click OK. If necessary, select a language from the drop-down list.
6. Follow the instructions in the window and complete the installation.
Starting the program
1. Connect your machine and the computer using crossover network cable.
2. Temporarily disable the computer firewall before continuing by doing the following:
Windows XP
• Open Control Panel.
• Double click Security
Center.
• Click Windows Firewall.
• Disable the firewall.
Macintosh OS
• Open System
Preferences.
• Click Sharing.
• Click the Firewall menu.
• Turn firewall off.
3. From the Windows Start menu, select All Programs > Samsung
Network Printer Utilities > SetIP > SetIP.
4. Click on the icon (third from left) in the SetIP window to open the
TCP/IP configuration window.
5. Enter the machine’s new information into the configuration window as follows:
• MAC Address : Find the machine’s MAC address from the Network
Configuration Report and enter it without the colons.
For example, 00:15:99:29:51:A8 becomes 0015992951A8.
MAC address is a hardware serial number of the machine’s network interface and can be found in on the Network
Configuration Report.
• IP Address: Enter a new IP address for your printer the same as the computer’s IP address except for the last number.
For example, if your computer’s IP address is 192.168.1.150, enter
192.168.1.X. (X is number between 1 and 254 other than the computer’s address.)
• Subnet Mask: Enter this exactly the same as the computer’s Subnet
Mask.
• Default Gateway: Enter this exactly the same as the computer’s
Default Gateway.
6. Click Apply, and then click OK. The machine will automatically print the Configuration report. Confirm that all the settings are correct.
7. Click Exit to close the SetIP program.
8. If necessary, restart the computer’s firewall.
Network parameter setting
You can also set up the various network settings through the network administration programs.
• SyncThru™ Web Admin Service: Web-based printer management solution for network administrators. SyncThru™ Web Admin Service provides you with an efficient way of managing network devices and lets you remotely monitor and troubleshoot network machines from any site with corporate internet access. Download this program from
http:// solution.samsungprinter.com
.
• SyncThru™ Web Service: Web server embedded on your network print server, which allows you to: (A) Configure the network parameters necessary for the machine to connect to various network environments.
(B) Customize machine settings.
22 _Getting started
Installing the driver software
You must install the printer driver software for printing. The software includes drivers, applications, and other user friendly programs.
The following procedure is based on Windows XP. The procedure and popup window which appears during the installation may differ depending on the operating system, machine features, or the interface in use.
Make sure that the network setup for your machine is completed. (See
"Setting up the network" on page 21.) All applications should be closed on
your computer before beginning the installation.
If your IP assignment method is DHCP and IP address can be changed whenever machine in turned on, we recommend you to use the Bonjour program. Go to the http://developer.apple.com/networking/bonjour/ download/, select the program Bonjour for Windows according to your computer operating system, and install the program. In case of Mac OS X, this program might be already installed in your PC. This program will allow you to fix the network parameter automatically. This Bonjour program does not support Linux.
If your IP assignment method is static, follow the steps below.
1. Insert the Printer Software CD-ROM into your CD-ROM drive. The CD-
ROM should automatically run, and an installation window appears.
2. Click Next.
• If the installation window does not appear, click Start > Run. Type
X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK.
• If you use Windows Vista, click Start > All Programs >
Accessories > Run, and type X:\Setup.exe.
• The installation window may slightly differ, if you are reinstalling the driver.
• View User’s Guide: Allows you to view the User’s Guide. If your computer does not have Adobe Acrobat, click on this option and it will automatically install Adobe Acrobat Reader for you.
3. Select Typical installation for a network printer, and then click Next.
4. The list of machines available on the network appears. Select the printer you want to install from the list and then click Next.
• If you do not see your machine on the list, click Update to refresh the list, or select Add TCP/IP Port to add your machine to the network. To add the machine to the network, enter the port name and the IP address for the machine.
• To verify your machine’s IP address or the MAC address, print a Network Configuration Report page.
5. After the installation is finished, a window appears asking you to print a test page and to register yourself as a user of Samsung machines in order to receive information from Samsung. If you wish to do so, select the corresponding checkbox(es) and click Finish.
If your machine does not work properly after the installation, verify your network settings and try reinstalling the printer driver.
USING A WIRELESS NETWORK(CLP-310W, CLP-
315W ONLY)
You must set up the network protocols on your machine to use it on your network. This chapter will show you how this is easily accomplished.
Before starting, please locate the crossover network cable and the Printer
Software Installation CD-ROM provided with your machine (;printer). You may need to contact a network administrator or the person who has set up your wireless network for information regarding the configuration.
If you are already aware of your machine’s IP address configuration and this
IP address is available, you may go to Configuring the machine’s
wireless network part directly. Otherwise you have to follow all steps from
Checking your Network Environments part.
Checking your Network Environments
IP address
Every device in a network is identified by a unique numerical address called an IP Address. Your machine came with a default IP address of
192.0.0.192, and you can verify this by printing out a Network
Configuration Report. In most cases a new IP address will be automatically assigned by a DHCP (Dynamic Host Configuration
Protocol Server) located on the network.
In a few situations the IP address must be set manually. This is called a static IP and is often required in corporate Intranets for security reasons.
We have provided an easy to use utility program on the Printer Software
CD-ROM named SetIP that can change the address for you.
In an office environment, we recommend that you contact a network administrator to set this address for you.
Wireless Networks
• Infrastructure mode: An Infrastructure mode network is the most common wireless network configuration in a home or office consisting of a wireless router, or an access point, that connects all the computers and other networked devices into a common local area network (LAN).
The access point provides a special high speed connection to a
Cable or DSL modem or other wide area network (WAN) device that connects the LAN to the Internet or a Corporate Intranet. Most
Infrastructure mode networks use a DHCP Server to automatically assign the IP address and set other network parameters.
If you know that you are connecting to an Infrastructure mode network with an access point, and the IP address is assigned by a
DHCP server, you may proceed to the Configuring the machine’s
wireless network part after reviewing the following parts on printing a Network Configuration Report.
If you know that you are connecting to an Infrastructure mode network with an access point, but it does not have DHCP address assignment, or you are required to set a static IP, proceed to the
Setting IP address part before going to Configuring the
machine’s wireless network part after reviewing the following parts on printing a Network Configuration Report.
• Ad-hoc mode : An Ad-hoc mode network provides peer to peer
Getting started_ 23
communication. In an Ad-hoc mode network, wireless devices and computers communicate directly with each other, without using an access point. They can share files and machines, but may not be able to access the Internet. The machine receives print jobs from wireless computers directly.
If you know that you are connecting to an ad-hoc mode network without an access point, proceed to the Setting IP address part before going to
Configuring the machine’s wireless network part after reviewing the following parts on printing a Network Configuration Report.
Printing Configuration report
You can print a Network Configuration Report from the machine’s control panel that will show the current machine’s network settings. This will help you to set up a network and troubleshooting problems.
To print the report, you need to press and hold Stop for about 5 seconds.
Please review your machines User’s Guide to learn of additional details.
Using this Network Configuration Report, you can find your machine MAC address and IP address.
For example:
MAC Address : 00:15:99:41:A2:78
IP Address : 192.0.0.192
Setting IP address
Firstly, you have to set up an IP address for network printing and managements. In most cases a new IP address will be automatically assigned by a DHCP (Dynamic Host Configuration Protocol Server) located on the network.
In a few situations the IP address must be set manually. This is called a static IP and is often required in corporate Intranets for security reasons.
• DHCP IP assignment: Connect your machine to the network, and wait a few minutes for the DHCP server to assign an IP address to the machine. (If the access point has an available LAN port, you may connect your machine directly to the access point.) Then, print the
Network Configuration Report as explained above. If the report shows that the IP address has changed, the assignment was successful. You will see the new IP address in the report. Leave the machine attached to the network.
• Static IP assignment: Use SetIP program to change the IP address from your computer. If your machine has a control panel, you can also change IP address using the machine's control panel.
In an office environment, we recommend that you contact a network administrator to set this address for you.
IP setting using SetIP program
The following procedure is based on Windows XP.
This program is for manually setting the network IP address of your machine using its MAC address to communicate with the machine. A
24 _Getting started
MAC address is the hardware serial number of the network interface and can be found in the Network Configuration Report.
• You only need to run this program if your network requires a static IP address. Otherwise, you may proceed to the
Configuring the machine’s wireless network part of this document. If you are unsure of this requirement ask the system administrator or the person who has set up your local network.
• You can only use the SetIP program when your machine is connected to a network or directly connected to a PC with the crossover network cable included with your machine. In most cases we recommend using the crossover cable. You will be asked to connect this cable in a moment.
Installing the program
1. Insert the Printer Software CD-ROM provided with your machine.
When the driver CD runs automatically, close that window.
2. Start a web browser such as Internet Explorer and open the X drive.
(X represents your CD-ROM drive.)
3. Double-click Application > SetIP.
4. Double-click Setup.exe to install this program.
5. Click OK. If necessary, select a language from the drop-down list.
6. Follow the instructions in the window and complete the installation.
Starting the program
1. Connect your machine and the computer using crossover network cable.
2. Temporarily disable the computer firewall before continuing by doing the following:
Windows XP
• Open Control Panel.
• Double click Security
Center.
• Click Windows Firewall.
• Disable the firewall.
Macintosh OS
• Open System
Preferences.
• Click Sharing.
• Click the Firewall menu.
• Turn firewall off.
3. From the Windows Start menu, select All Programs > Samsung
Network Printer Utilities > SetIP > SetIP.
4. Click on the icon (third from left) in the SetIP window to open the
TCP/IP configuration window.
5. Enter the machine’s new information into the configuration window as follows:
• MAC Address : Find the machine’s MAC address from the Network
Configuration Report and enter it without the colons.
For example, 00:15:99:29:51:A8 becomes 0015992951A8.
MAC address is a hardware serial number of the machine’s network interface and can be found in the Network
Configuration Report.
• IP Address: Enter a new IP address for your printer the same as the computer’s IP address except for the last number.
For example, if your computer’s IP address is 192.168.1.150, enter
192.168.1.X. (X is number between 1 and 254 other than the computer’s address.)
• Subnet Mask: Enter this exactly the same as the computer’s Subnet
Mask.
• Default Gateway: Enter this exactly the same as the computer’s
Default Gateway.
6. Click Apply, and then click OK. The machine will automatically print the Configuration report. Confirm that all the settings are correct.
7. Click Exit to close the SetIP program.
8. If necessary, restart the computer’s firewall.
Network parameter setting
You can also set up the various network settings through the network administration programs.
• SyncThru™ Web Admin Service: Web-based printer management solution for network administrators. SyncThru™ Web Admin Service provides you with an efficient way of managing network devices and lets you remotely monitor and troubleshoot network machines from any site with corporate internet access. Download this program from
http:// solution.samsungprinter.com
.
• SyncThru™ Web Service: Web server embedded on your network print server, which allows you to: (A) Configure the network parameters necessary for the machine to connect to various network environments.
(B) Customize machine settings.
Restoring factory default settings
You can restore factory default settings to the machine by using SyncThru™
Web Service. You may need to reset the machine to the factory default settings when machine that you are using is connected to new network environment.
Restoring factory default settings using SyncThru™
Web Service
1. Start a web browser such as Internet Explorer, Safari or Firefox and enter your machine’s new IP address in the browser window.
For example,
2. When the SyncThru™ Web Service window opens, click Network
Settings.
3. Click Reset. Then, click Clear for network.
4. Turn off and restart machine to apply settings.
Configuring the machine’s wireless network
Before starting you will need to know the SSID of your wireless network and the Network Key if it is encrypted. This information was set when the access point was installed. If you do not know about your wireless environment, please ask the person who has set up your network.
Using SyncThru™ Web Service
Before starting wireless parameter configuration, make sure cable connection status.
Configuring the printer’s wireless network
1. Start a web browser such as Internet Explorer, Safari or Firefox and enter your machine’s new IP address in the browser window.
For example,
2. When the SyncThru Web Service window opens, click Network
Settings.
3. Click Wireless and Select Wizard. Then, click Next.
Wizard will help you setup the wireless network configuration.
However, if you want to set the wireless network directly, select
Custom.
Getting started_ 25
4. Select the one Network Name(SSID) in the list.
• SSID: SSID(Service Set Identifier) is a name that identifies a wireless network. Access points and wireless devices attempting to connect to a specific wireless network must use the same SSID. The SSID is case-sensitive.
• Operation Mode: Operation Mode refers to the type of wireless connections.
- Ad-hoc: allows wireless devices to communicate directly with each other in a peer-to-peer environment.
- Infrastructure: allows wireless devices to communicate with each other through an access point.
If your network’s operation mode is Infrastructure, select the SSID of the access point. If the operation mode is Ad-hoc, select the machine’s SSID. Note that “airportthru” is the default SSID of your machine.
5. Click Next.
If wireless security setting window appears, enter the registered password (network key) and click Next.
6. Wizard Setup Confirmation window appears, please check your wireless setup. If the setup is right, click Apply.
26 _Getting started
7. Click OK.
Disconnect the network cable (standard or crossover). Your machine should then start communicating wirelessly with the network. In case of Ad-hoc mode, you can use a wireless LAN and wired LAN simultaneously.
If Operation Mode is Infrastructure, you must disconnect the network cable to activate wireless network after completing the network setting.
Now go to Installing the driver software.
Installing the driver software
You must install the printer driver software for printing. The software includes drivers, applications, and other user friendly programs.
• The following procedure is based on Windows XP. The procedure and popup window which appears during the installation may differ depending on the operating system, machine features, or the interface in use.
• Make sure that the network setup for your machine is completed.
(See "Setting up the network" on page 21.) All applications should
be closed on your computer before beginning installation.
If your IP assignment method is DHCP and IP address can be changed whenever machine is turned on, we recommend you to use the Bonjour program. Go to the http://developer.apple.com/networking/bonjour/ download/, select the program Bonjour for Windows according to your computer operating system, and install the program. In case of Mac OS X, this program might be already installed in your PC. This program will allow you to fix the network parameter automatically. This Bonjour program does not support Linux.
If your IP assignment method is static, follow the steps below.
1. Insert the Printer Software CD-ROM into your CD-ROM drive. The CD-
ROM should automatically run, and an installation window appears.
2. Click Next.
• If the installation window does not appear, click Start > Run. Type
X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK.
• If you use Windows Vista, click Start > All Programs >
Accessories > Run, and type X:\Setup.exe.
• The installation window may slightly differ, if you are reinstalling the driver.
• View User’s Guide: Allows you to view the User’s Guide. If your computer does not have Adobe Acrobat, click on this option and it will automatically install Adobe Acrobat Reader for you.
3. Select Typical installation for a network printer, and then click Next.
4. The list of machines available on the network appears. Select the printer you want to install from the list and then click Next.
• If you do not see your machine on the list, click Update to refresh the list, or select Add TCP/IP Port to add your machine to the network. To add the machine to the network, enter the port name and the IP address for the machine.
• To verify your machine’s IP address or the MAC address, print a Network Configuration Report page.
5. After the installation is finished, a window appears asking you to print a test page and to register yourself as a user of Samsung machines in order to receive information from Samsung. If you wish to do so, select the corresponding checkbox(es) and click Finish.
If your machine does not work properly after the installation, verify your network settings and try reinstalling the printer driver.
Congratulations, you have installed your Samsung wireless network printer.
Print another copy of the Configuration report and keep it for future reference. You are now ready to use your new Samsung wireless printer on your network.
MACHINE'S BASIC SETTINGS
After installation is complete, you may want to set the machine's default settings. Refer to the next section if you would like to set or change values.
Altitude adjustment
The print quality is affected by atmospheric pressure, which is determined by the height of the machine above sea level. The following information will guide you on how to set your machine to the best print quality or best quality of print.
Before you set the altitude value, find the altitude where you are using the machine.
1 Normal
2 High 1
3 High 2
4 High 3
0
1. Ensure that you have installed the printer driver with the provided
Printer Software CD.
2. Double-click the Smart Panel icon on the Windows task bar (or
Notification Area in Linux).
You can also click Smart Panel on the status bar in Mac OS X.
3. Click Printer Setting.
4. Click Setting > Altitude Adjustment. Select the appropriate value from the dropdown list, and then click Apply.
If your machine is connected to a network, SyncThru™ Web
Service screen appears automatically. Click Machine Settings >
Setup (or Machine Setup) > Altitude. Select the appropriate altitude value, and then click Apply.
Using the save modes
Power Save mode
Power Save mode allows your machine to reduce power consumption when it is not in actual use. You can turn this mode on and select a length of time for which the machine waits after a job is printed before it switches to a reduced power state.
1. Ensure that you have installed the printer driver with the provided
Printer Software CD.
2. Double-click the Smart Panel icon on the Windows task bar (or
Notification Area in Linux).
You can also click Smart Panel on the status bar in Mac OS X.
3. Click Printer Setting.
4. Click Setting > Power Save. Select the appropriate value from the dropdown list, and then click Apply.
If your machine is connected to a network, SyncThru™ Web
Service screen appears automatically. Click Machine Settings >
Setup (or Machine Setup) > Power Save. Select the appropriate altitude value, and then click Apply.
Auto continue
This is the option to set the machine to continue printing or not, in case the paper size you have set and the paper within the tray mismatches.
1. Ensure that you have installed the printer driver with the provided
Printer Software CD.
2. Double-click the Smart Panel icon on the Windows task bar (or
Notification Area in Linux).
You can also click Smart Panel on the status bar in Mac OS X.
3. Click Printer Setting.
4. Click Setting > Auto Continue. Select the appropriate value from the dropdown list, and then click Apply.
If your machine is connected to a network, SyncThru™ Web
Service screen appears automatically. Click Machine Settings >
Setup (or Machine Setup) > Auto Continue. Select the appropriate altitude value, and then click Apply.
Getting started_ 27
selecting and loading print media
This chapter introduces you how to load originals and print media into your machine.
This chapter includes:
•
•
Changing the size of the paper in the paper tray
•
Printing on special print materials
•
•
Setting the paper size and type
SELECTING PRINT MEDIA
You can print on a variety of print media, such as plain paper, envelopes, labels, and transparencies. Always use print media that meet the guidelines for use with your machine. Print media that does not meet the guidelines outlined in this user’s guide may cause the following problems:
• Poor print quality
• Increased paper jams
• Premature wear on the machine.
Properties, such as weight, composition, grain, and moisture content, are important factors that affect the machine’s performance and the output quality. When you choose print materials, consider the following:
• The type, size and weight of the print media for your machine are described later in this section.
• Desired outcome: The print media you choose should be appropriate for your project.
• Brightness: Some print media are whiter than others and produce sharper, more vibrant images.
• Surface smoothness: The smoothness of the print media affects how crisp the printing looks on the paper.
• Some print media may meet all of the guidelines in this section and still not produce satisfactory results. This may be the result of improper handling, unacceptable temperature and humidity levels, or other variables over which Samsung has no control.
• Before purchasing large quantities of print media, ensure that it meets the requirements specified in this user’s guide.
Using print media that does not meet these specifications may cause problems, requiring repairs. Such repairs are not covered by
Samsung’s warranty or service agreements.
Make sure not to use the inkjet photo paper with this machine. It could cause damage to the machine.
Selecting and loading print media_ 28
Specifications on print media
TYPE
Plain paper
SIZE DIMENSIONS
216 x 279 mm (8.5 x 11 inches)
216 x 356 mm (8.5 x 14 inches)
216 x 330 mm (8.5 x 13 inches)
210 x 297 mm (8.26 x 11.69 inches)
216 x 343 mm (8.5 x 13.5 inches)
182 x 257 mm (7.16 x 10.11 inches)
176 x 250 mm (6.93 x 9.84 inches)
184 x 267 mm (7.25 x 10.5 inches)
140 x 216 mm (5.50 x 8.50 inches)
148 x 210 mm (5.82 x 8.26 inches)
105 x 148 mm (4.13 x 5.82 inches)
98 x 191 mm (3.87 x 7.5 inches)
105 x 241 mm (4.12 x 9.5 inches)
110 x 220 mm (4.33 x 8.66 inches)
162 x 229 mm (6.37 x 9.01 inches)
114 x 162 mm (4.48 x 6.38 inches)
98 x 225 mm (3.87 x 8.87 inches)
92 x 165 mm (3.62 x 6.5 inches)
Refer to the Plain paper section
WEIGHT
A
• 60 to 105 g/m
2
(16 to 28 lb bond)
Envelope
Thick paper
Thin paper
Statement
A5
A6
Monarch
No. 10
DL
C5
C6
Letter
Legal
Folio
A4
Oficio
JIS B5
ISO B5
Executive
No.9
6 3/4
Refer to the Plain paper section
Refer to the Plain paper section
Letter, A4
Refer to the Plain paper section
• 60 to 163 g/m
75 to 90 g/m
2
90 to 105 g/m
2
2
(16 to 43 lb bond)
(20 to 24 lb bond)
(24 to 28 lb bond)
60 to 70 g/m2 (16 to 19 lb bond)
Labels c
Card stock
Post card
Transparency d
Letter, A4
Glossy paper
Letter e
, A4 f
Minimum size (custom)
Refer to the Plain paper section
101.6 x 152.4 mm (4 x 6 inches)
Refer to the Plain paper section
Refer to the Plain paper section
120 to 150 g/m
2
(32 to 40 lb bond)
105 to 163 g/m
2
(28 to 43 lb bond)
138 to 146 g/m
160 g/m
2
2
(37 to 39 lb bond)
(44 lb bond)
76 x 160 mm (3 x 6.3 inches)
216 x 356 mm (8.5 x 14 inches)
60 to 163 g/m
2
(16 to 43 lb bond)
Maximum size (custom)
a. If media weight is over 105 g/m 2 (28 lb bond), load a paper into the tray one by one.
b. Maximum capacity may differ depending on media weight, thickness, and environmental conditions.
c. Smoothness: 100 to 250 (sheffield) d. Recommended media: Transparency for a color laser printer by Xerox such as 3R 91331(A4), 3R 2780(Letter).
e. Recommended media: Glossy paper (Letter) for this machine by HP Brochure Paper (Product: Q6611A) only.
f. Recommended media: Glossy paper (A4) for this machine by HP Superior Paper 160 glossy (Product: Q6616A) only.
CAPACITY
B
• 150 sheets of 75 g/m
2
(20 lb bond) paper for the tray
• 1 sheet for manual feeding in the tray
5 sheets for manual feeding in the tray
1 sheet for manual feeding in the tray
29 _Selecting and loading print media
Guidelines for special print media
MEDIA TYPE
Envelopes
GUIDELINES
• Successful printing on envelopes depends upon the quality of the envelopes. When selecting envelopes, consider the following factors:
- Weight: The weight of the envelope paper should not exceed 90 g/m
2
or jamming may occur.
- Construction: Prior to printing, envelopes should lie flat with less than 6 mm curl, and should not contain air.
- Condition: Envelopes should not be wrinkled, nicked, or otherwise damaged.
- Temperature: You should use envelopes that are compatible with the heat and pressure of the machine during operation.
• Use only well-constructed envelopes with sharp and well creased folds.
• Do not use stamped envelopes.
• Do not use envelopes with clasps, snaps, windows, coated lining, self-adhesive seals, or other synthetic materials.
• Do not use damaged or poorly made envelopes.
• Be sure the seam at both ends of the envelope extends all the way to the corner of the envelope.
1 Acceptable
2 Unacceptable
• Envelopes with a peel-off adhesive strip or with more than one flap that folds over to seal must use adhesives compatible with the machine’s fusing temperature for 0.1 second. Check your machine’s specification to view the fusing temperature, see
page 51. The extra flaps and strips might cause
wrinkling, creasing, or jams, and may even damage the fuser.
• For the best print quality, position margins no closer than 15 mm from the edges of the envelope.
• Avoid printing over the area where the envelope’s seams meet.
MEDIA TYPE
Labels
GUIDELINES
• To avoid damaging the machine, use only labels designed for use in laser machines.
- When selecting labels, consider the following factors:
- Adhesives: The adhesive material should be stable at your machine’s fusing temperature.
Check your machine’s specification to view the
fusing temperature, see page 51.
- Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets that have spaces between the labels, causing serious jams.
- Curl: Prior to printing, labels must lie flat with no more than 13 mm of curl in any direction.
- Condition: Do not use labels with wrinkles, bubbles, or other indications of separation.
• Make sure that there is no exposed adhesive material between labels. Exposed areas can cause labels to peel off during printing, which can cause paper jams. Exposed adhesive can also cause damage to machine components.
• Do not run a sheet of labels through the machine more than once. The adhesive backing is designed for only a single pass through the machine.
• Do not use labels that are separating from the backing sheet or are wrinkled, bubbled, or otherwise damaged.
Card stock or custom-sized materials
• Do not print on media smaller than 76 mm wide or
356 mm long.
• In the software application, set margins at least
6.4 mm away from the edges of the material.
Preprinted paper
• Letterhead must be printed with heat-resistant ink that will not melt, vaporize, or release hazardous emissions when subjected to the printer’s fusing temperature for 0.1 second. Check your machine’s specification to view the fusing temperature, see
• Letterhead ink must be non-flammable and should not adversely affect printer rollers.
• Forms and letterhead should be sealed in a moisture-proof wrapping to prevent changes during storage.
• Before you load preprinted paper, such as forms and letterhead, verify that the ink on the paper is dry. During the fusing process, wet ink can come off preprinted paper, reducing print quality.
Using photographic paper or coated paper may cause problems, requiring repairs. Such repairs are not covered by Samsung’s warranty or service agreements.
30 _Selecting and loading print media
CHANGING THE SIZE OF THE PAPER IN THE
PAPER TRAY
To load different sizes of paper, such as Legal-sized paper, you need to adjust the paper guides to extend the paper tray.
To change the tray size to other size, you must adjust the paper length guide properly.
3. Load paper into the tray.
1 Tray extend lever
2 Paper length guide
3 Paper width guide
4 Paper cover
1. Pull the tray out of the machine. Open the paper cover and remove paper from the tray if necessary.
4. Slide the paper length guide until it lightly touches the end of the paper stack. Squeeze the paper width guide and slide it to the edge of the paper stack without causing it to bend.
For paper smaller than Letter-sized, return the paper guides to their original positions and adjust the paper length guide and paper width guide.
2. Pressing and unlatching the guide lock in the top of the tray, pull the tray out manually.
If the paper that you need to print is shorter than length 222 mm (8.74 inches), press and unlatch the guide lock in the tray, push the tray in
Selecting and loading print media_ 31
manually.
Adjust the paper length guide and paper width guide.
The tray is preset to Letter or A4 size, depending on your country. To change the size to A4 or Letter, you must adjust the lever and paper width guide properly.
1 Pull the tray out of the machine. Open the paper cover and remove paper from the tray if necessary.
2 If you want to change the size to Letter, hold the lever at the back of the tray, and rotate the lever clockwise.
• Do not push the paper width guides far enough to cause the materials to warp.
• If you do not adjust the paper width guides, it may cause paper jams.
5. Close the paper cover.
3 Squeeze the paper width guide and slide it to the edge of the lever.
6. Slide the tray back into the machine until it clicks.
• If you experience problems with paper feed, place one sheet at a time in the tray.
• You can load previously printed paper. The printed side should be facing up with an uncurled edge at the rear. If you experience problems with paper feed, turn the paper around. Note that print quality is not guaranteed.
If you want to change the size to A4, first move the paper width guide to left and rotate the lever counterclockwise. If you force the lever, it could damage the tray.
32 _Selecting and loading print media
PRINTING ON SPECIAL PRINT MATERIALS
The machine can hold special sizes and types of print material, such as postcards, note cards, and envelopes. Especially, it is useful for single page printing on letterhead or colored paper.
Feeding the print material manually
• Load only one size of print media at a time in the tray.
• To prevent paper jams, do not add paper when there is still paper in the tray. This also applies to other types of print media.
• Print media should be loaded face up with the side you want to print, and the top edge going into the tray first. Place print materials in the center of the tray.
• Always load only the specified print media to avoid paper jams and
print quality problems. (See "Selecting print media" on page 28.)
• Flatten any curl on postcards, envelopes, and labels before loading them into the tray.
1. Load the paper. (See "Changing the size of the paper in the paper tray" on page 31.)
Depending on the media type you are using, keep the following loading guidelines:
• Envelopes: Flap side down and with the stamp area on the top left side.
• Labels: Print side up and top short edge entering the machine first.
• Preprinted paper: Design side up with the top edge toward the machine.
• Card stock: Print side up and the short edge entering the machine first.
• Previously printed paper: Previously printed side down with an uncurled edge toward the machine.
2. When you print in application, start the print menu.
3. Before you print, open printer properties.
4. Press the Paper tab in printer properties, and select an appropriate paper type.
If you want to use an label, set the paper type to Label.
5. Select Manual Feeder in paper source then, press OK.
6. Start printing in application.
7. Press the Stop button on the machine to start feeding then the machine starts printing.
• If you are printing multiple pages, load the next sheet after first page prints out, and press the Stop button. Repeat this step for every page to be printed.
• The settings you change remain in effect only while you are using the current application.
ADJUSTING THE OUTPUT SUPPORT
The printed pages stack on the output tray, and the output support will help the printed pages align. To let the output support correctly align the pages you need to pull it out appropriately depending on the paper size.
1 Output support
• If the output support is incorrectly adjusted, printed pages may be mis-aligned or fall.
• If you continuously print many pages, the surface of the output tray may become hot. Be careful not to touch the surface, and especially keep children away from the surface.
SETTING THE PAPER SIZE AND TYPE
After loading paper in the paper tray, you need to set the paper size and type using the printer driver. Follow these steps to make your changes permanent.
The following procedure is for Windows XP. For other Windows OS, refer to the corresponding Windows User's Guide or online help.
1. Click the Start button on the computer screen.
2. Select Printers and Faxes.
3. Right-click on the printer driver icon and select Printing Preferences.
4. Click the Paper tab, and change the settings on Paper Options.
5. Click OK.
Selecting and loading print media_ 33
basic printing
This chapter explains common printing tasks.
This chapter includes:
•
PRINTING A DOCUMENT
Your machine allows you to print from various Windows, Macintosh, or
Linux applications. The exact steps for printing a document may vary depending on the application you use.
For details about printing, see the Software secion.
CANCELING A PRINT JOB
If the print job is waiting in a print queue or print spooler, such as the printer group in Windows, delete the job as follows:
1. Click the Windows Start menu.
2. For Windows 2000, select Settings and then Printers.
For Windows XP/2003, select Printers and Faxes.
For Windows Vista, select Control Panel > Hardware and Sound >
Printers.
3. Double-click the Samsung CLP-310 Series icon.
4. From the Document menu, select Cancel.
You can also access this window by simply double-clicking the printer icon at the bottom right corner of the Windows desktop.
You can also cancel the current job by pressing Stop on the control panel.
•
Basic printing_ 34
maintenance
This chapter provides information for maintaining your machine and the toner cartridge.
This chapter includes:
•
•
•
•
•
•
Replacing the waste toner container
•
•
Managing your machine from the website
3. Grasp the handles on the toner cartridge and pull to remove the cartridge from the machine.
PRINTING REPORTS
You can print a configuration report from the machine’s control panel. Use the configuration page to view the current settings, to help troubleshoot problems. In Ready mode, press and hold the Stop button on the control panel for about 5 seconds.
CLEANING YOUR MACHINE
To maintain print quality, follow the cleaning procedures below each time the toner cartridge is replaced or if print quality problems occur.
• Cleaning the cabinet of the machine with cleaning materials containing large amounts of alcohol, solvent, or other strong substances can discolor or distort the cabinet.
• If your machine or its surrounding is contaminated with toner, we recommend you to use cloth or tissue dampened with water to clean it. If you use a vacuum cleaner, toner blown into the air may be harmful.
Cleaning the outside
Clean the cabinet of the machine with a soft lint-free cloth. You can dampen the cloth slightly with water, but be careful not to let any water drip onto or into the machine.
Cleaning the inside
During the printing process, paper, toner, and dust particles can accumulate inside the machine. This buildup can cause print quality problems, such as toner specks or smearing. Cleaning the inside of the machine clears or reduces these problems.
1. Turn the machine off and unplug the power cord. Wait for the machine to cool down.
2. Press the release button, completely open the front cover.
4. Pull the waste toner container out of the machine using its handle.
35 _Maintenance
5. Pull the imaging unit out of the machine using the groove on the front of the imaging unit.
7. Holding the groove on the front of the imaging unit, push imaging unit in to the machine.
• Do not touch the green surface on the imaging unit with your hands or any other material.
• Be careful not to scratch the surface of the imaging unit.
• If you leave the front cover open for more than a few minutes, the imaging unit can be exposed to light. This will cause damage to the imaging unit. Close the front cover should the installation need to be halted for any reason.
6. With a dry lint-free cloth, wipe away any dust and spilled toner from the toner cartridges area and their cavities.
8. Insert the waste toner container into position and then push it to make sure that it is firmly seated in place.
9. Slide the toner cartridge back into the machine.
• If toner gets on your clothing, wipe it off with a dry cloth and wash it in cold water. Hot water sets toner into fabric.
• If your machine or its surrounding is contaminated with toner, we recommend you to use a cloth or tissue dampened with water to clean it. If you use a vacuum cleaner, toner blows into the air then might be harmful to you.
After cleaning, let the machine to dry completely.
10. Reinstall all the compartments into the machine, and close the front cover.
If the front cover is not completely closed, the machine will not operate.
11. Plug in the power cord and turn the machine on
36 _Maintenance
MAINTAINING THE CARTRIDGE
Toner cartridge storage
To get the most from the toner cartridge, keep the following guidelines in mind:
• Do not remove the toner cartridge from its package until ready for use.
• Do not refill the toner cartridge. The machine warranty does not cover damage caused by using a refilled cartridge.
• Store toner cartridges in the same environment as your machine.
• To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes.
Expected cartridge life
The life of the toner cartridge yield depends on the amount of toner that print jobs require. The actual number may also be different depending on the print density of the pages you print on, and the number of pages may be affected by operating environment, printing interval, media type, and media size. If you print a lot of graphics, you may need to change the cartridge more often.
Redistributing toner
When a toner is low, faded or light areas may appear. It is possible that colored images may be printed with incorrect colors due to flawed mixing of toner colors when one of the colored toner cartridges is low on toner. You can temporarily improve print quality by redistributing the toner.
• The toner-related message saying that the toner is low may appear on the display.
• The SmartPanel program window appears on the computer telling you which color cartridge is low on toner.
1. Press the release button, completely open the front cover.
2. Grasp the handles on the toner cartridge and pull to remove the cartridge from the machine.
3. Holding both handles on the toner cartridge, thoroughly rock it from side to side to evenly distribute the toner.
If toner gets on your clothing, wipe it off with a dry cloth and wash it in cold water. Hot water sets toner into fabric.
4. Slide the toner cartridge back into the machine.
5. Close the front cover. Make sure the cover is securely latched.
If the front cover is not completely closed, the machine will not operate.
Maintenance_ 37
REPLACING THE TONER CARTRIDGE
The machine uses four colors and has a different toner cartridge for each one: yellow (Y), magenta (M), cyan (C), and black (K).
When the toner colors LED, on the control panel, indicating each individual toner cartridge according to its color, lights, and the status LED lights red, the machine cartridge is totally exhausted. Your machine stops printing.
Also, the Smart Panel program window appears on the computer telling you to replace the cartridge.
At this stage, the toner cartridge needs to be replaced. Check the type of
toner cartridge for your machine. (See "Supplies" on page 50.)
1. Turn the machine off, then wait a few minutes for the machine to cool.
2. Press the release button, completely open the front cover.
5. Holding both handles on the toner cartridge, thoroughly rock it from side to side to evenly distribute the toner.
6. Place the toner cartridge on a flat surface, as shown, and remove the protecting cover.
If toner gets on your clothing, wipe it off with a dry cloth and wash it in cold water. Hot water sets toner into fabric.
7. Make sure that the color of the toner cartridge matches the color slot and then grasp the handles on the toner cartridge. Insert the cartridge until it clicks into place.
3. Grasp the handles on the toner cartridge and pull to remove the cartridge from the machine.
4. Take a new toner cartridge out of its package.
• Don't use sharp objects, such as a knife or scissors, to open the toner cartridge package. You could damage the surface of the toner cartridge.
• To prevent damage, do not expose the toner cartridge to light for more than a few minutes. Cover it with a piece of paper to protect it if necessary.
38 _Maintenance
8. Close the front cover. Make sure the cover is securely latched, and then turn the machine on.
If the front cover is not completely closed, the machine will not operate.
REPLACING THE IMAGING UNIT
When the life span of the imaging unit has expired, the Smart Panel program window appears on the computer, indicating the imaging unit needs to be replaced. Otherwise your machine stops printing.
1. Turn the machine off, then wait a few minutes for the machine to cool.
2. Press the release button, completely open the front cover.
5. Pull the imaging unit out of the machine using the groove on the front of the imaging unit.
6. Take a new imaging unit out of its package.
3. Grasp the handles on the toner cartridge and pull to remove the cartridge from the machine.
4. Pull the waste toner container out of the machine using its handle.
• Don’t use sharp objects, such as a knife or scissors, to open the imaging unit package. You could damage the surface of the imaging unit.
• Be careful not to scratch the surface of the imaging unit.
• To prevent damage, do not expose the imaging unit to light for more than a few minutes. Cover it with a piece of paper to protect it if necessary.
7. Holding the groove on the front of the imaging unit, push imaging unit in to the machine.
Maintenance_ 39
8. Insert the waste toner container into position and then push it to make sure that it is firmly seated in place.
REPLACING THE WASTE TONER CONTAINER
When the life span of the waste toner container has expired, the Smart
Panel program window appears on the computer, indicating the waste toner container needs to be replaced. Otherwise your machine stops printing.
1. Turn the machine off, then wait a few minutes for the machine to cool.
2. Open the front cover.
9. Slide the toner cartridge back into the machine.
3. Pull the waste toner container out of the machine using its handle.
10. Close the front cover firmly.
If the front cover is not completely closed, the machine will not operate. Please make sure all toner cartridges are installed properly.
If any toner cartridge is installed improperly, the front cover do not close.
11. Turn the machine on.
Each LED blinks red in a repeated order. Wait for about 1.5 minutes for your machine to get ready.
Make sure that you lay the waste toner container on a flat surface so that the toner does not spill.
4. Remove the container’s cap from the container as shown below, and use it to close the waste toner container opening.
Do not tilt or turn over the container.
5. Take a new waste toner container out of its package.
40 _Maintenance
6. Insert the new container into position and then push it to make sure that it is firmly seated in place.
7. Close the front cover firmly.
If the front cover is not completely closed, the machine will not operate. Please make sure all toner cartridges are installed properly.
If any toner cartridge is installed improperly, the front cover do not close.
8. Turn the machine on.
MAINTENANCE PARTS
To avoid print quality and paper feed problems resulting from worn parts, and to maintain your machine in top working condition the following condition, the following items will need to be replaced after the specified number of pages, or when the life span of each item has expired.
ITEMS
Pick-up roller
YIELD (AVERAGE)
Approx. 50,000 pages
Fuser unit
Approx. 100,000 black pages or
25,000 color pages
Transfer roller
Transfer Unit (ITB)
Approx. 100,000 pages
Approx. 100,000 black pages or
25,000 color pages
We highly recommend that this maintenance be performed by an authorized service provider, dealer or the retailer where you bought the machine. The warranty does not cover the replacement of the maintenance parts after their lifespan.
MANAGING YOUR MACHINE FROM THE
WEBSITE
If you have connected your machine to a network and set up TCP/IP network parameters correctly, you can manage the machine via Samsung’s
SyncThru™ Web Service, an embedded web server. Use SyncThru™
Web Service to:
• View the machine’s device information and check its current status.
• Change TCP/IP parameters and set up other network parameters.
• Change the printer properties.
• Set the machine to send email notifications to let you know the machine’s status.
• Get support for using the machine.
To access SyncThru™ Web Service:
1. Start a web browser, such as Internet Explorer, from Windows.
2. Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and press the Enter key or click Go.
Your machine’s embedded website opens.
Maintenance_ 41
troubleshooting
This chapter gives helpful information for what to do if you encounter an error.
This chapter includes:
•
•
•
TIPS FOR AVOIDING PAPER JAMS
By selecting the correct media types, most paper jams can be avoided.
When a paper jam occurs, follow the steps outlined on page 42.
•
Follow the procedures on page 31. Ensure that the adjustable guides
are positioned correctly.
• Do not overload the tray. Ensure that the paper level is below the paper capacity mark on the inside of the tray.
• Do not remove paper from the tray while your machine is printing.
• Flex, fan, and straighten paper before loading.
• Do not use creased, damp, or highly curled paper.
• Do not mix paper types in a tray.
•
Use only recommended print media. (See "Setting the paper size and type" on page 33.)
• Ensure that the recommended side of the print media is facing up in the tray.
CLEARING PAPER JAMS
To avoid tearing the paper, pull the jammed paper out gently and slowly. Follow the instructions in the following sections to clear the jam.
If a paper jam occurs, the status LED on the control panel lights red. Find and remove the jammed paper.
To resume printing after clearing paper jams, you must open and close the front cover or rear cover.
If paper is jammed in the paper feed area, follow the next steps to release the jammed paper.
1. Pull the tray out of the printer and remove the jammed paper.
2. To remove the jammed paper, open the rear cover.
3. Carefully remove the paper by pulling in the direction as shown below.
Most of the jammed paper can be removed in this step.
If you cannot find the jammed paper, or if there is any resistance removing the paper, stop pulling and go to the next step.
If the paper tears, make sure that all of the paper fragments are removed from the printer.
If you cannot find the jammed paper, go to the next step.
Troubleshooting_ 42
4. Push the fuser levers upwards. 7. Close the top cover. Make sure that it is securely closed.
5. Open the top cover and inner cover.
1 fuser lever
8. Push the fuser levers downwards.
6. Holding the inner cover open, carefully take the jammed paper out of the printer. The inner cover will then close automatically.
9. Open and then close the rear cover or front cover to resume printing.
Do not touch the fuser inside the inner cover. It is hot and could cause burns! The fuser’s operating temperature is 180 °C (356 °F). Take care when removing paper from the printer.
Troubleshooting_ 43
SOLVING OTHER PROBLEMS
The following chart lists some conditions that may occur and the recommended solutions. Follow the suggested solutions until the problem is corrected. If the problem persists, call for service.
Paper feeding
CONDITION
Paper is jammed during printing.
Paper sticks together.
SUGGESTED SOLUTIONS
Clear the paper jam. See page 42.
Multiple sheets of paper do not feed.
• Ensure there is not too much paper in the tray.
The tray can hold up to 150 sheets of paper, depending on the thickness of your paper.
• Make sure that you are using the correct type
• Remove paper from the tray and flex or fan the paper.
• Humid conditions may cause some paper to stick together.
• Different types of paper may be stacked in the tray. Load paper of only one type, size, and weight.
• If multiple sheets have caused a paper jam,
clear the paper jam. See page 42.
Paper does not feed into the machine.
• Remove any obstructions from inside the machine.
• Paper has not been loaded correctly. Remove paper from the tray and reload it correctly.
• There is too much paper in the tray. Remove excess paper from the tray.
• The paper is too thick. Use only paper that meets the specifications required by the
The paper keeps jamming.
• There is too much paper in the tray. Remove excess paper from the tray. If you are printing on special materials, load only one size of print media at a time in the tray.
• An incorrect type of paper is being used. Use only paper that meets the specifications
required by the machine. See page 29.
• There may be debris inside the machine. Open the front cover and remove the debris.
Envelopes skew or fail to feed correctly.
Ensure the paper guides are against both sides of the envelopes.
Printing problems
CONDITION
The machine does not print.
POSSIBLE
CAUSE
The machine is not receiving power.
SUGGESTED SOLUTIONS
Check the power cord connections. Check the power switch and the power source.
The machine is not selected as the default printer.
Select Samsung CLP-310
Series as your default printer in your Windows.
• Check the machine for the following:
• The front cover is not closed. Close the cover.
• Paper is jammed. Clear the paper jam. See page
•
No paper is loaded. Load paper. See page 31.
• The toner cartridge is not installed. Install the toner cartridge.
• If a system error occurs, contact your service representative.
Disconnect the printer cable and reconnect it.
The connection cable between the computer and the machine is not connected properly.
The connection cable between the computer and the machine is defective.
The port setting is incorrect.
The machine may be configured incorrectly.
If possible, attach the cable to another computer that is working properly and print a job. You can also try using a different printer cable.
Check the Windows printer setting to make sure that the print job is sent to the correct port. If the computer has more than one port, make sure that the machine is attached to the correct one.
Check the printer properties to ensure that all of the print settings are correct.
The machine does not print special sized paper such as a billing paper.
The printer driver may be incorrectly installed.
The machine is malfunctioning.
Repair the printer software.
See the Software section.
Check the LEDs status on the control panel to see if the machine is indicating a system error.
Paper size and paper size setting do not match.
Set the correct paper size in the custom in the paper tab in the printer properties.
44 _Troubleshooting
CONDITION
POSSIBLE
CAUSE
SUGGESTED SOLUTIONS
The machine selects print materials from the wrong paper source.
A print job is extremely slow.
The paper source selection in the printer properties may be incorrect.
For many software applications, the paper source selection is found under the Thin Paper tab within the printer properties.
Select the correct paper source. See the printer driver help screen.
The job may be very complex.
Reduce the complexity of the page or try adjusting the print quality settings.
Half the page is blank.
The machine prints, but the text is wrong, garbled, or incomplete.
The page orientation setting may be incorrect.
Change the page orientation in your application. See the printer driver help screen.
The paper size and the paper size settings do not match.
The printer cable is loose or defective.
Ensure that the paper size in the printer driver settings matches the paper in the tray.
Or, ensure that the paper size in the printer driver settings matches the paper selection in the software application settings you use.
Disconnect the printer cable and reconnect. Try a print job that you have already printed successfully. If possible, attach the cable and the machine to another computer and try a print job that you know works. Finally, try a new printer cable.
The wrong printer driver was selected.
Check the application’s printer selection menu to ensure that your machine is selected.
Try printing a job from another application.
The software application is malfunctioning.
The operating system is malfunctioning.
Exit Windows and reboot the computer. Turn the machine off and then back on again.
Pages print, but are blank.
The toner cartridge is defective or out of toner.
Redistribute the toner, if
If necessary, replace the toner cartridge.
The file may have blank pages.
Check the file to ensure that it does not contain blank pages.
Some parts, such as the controller or the board, may be defective.
Contact a service representative.
CONDITION
The printer does not print PDF file correctly. Some parts of graphics, text, or illustrations are missing.
POSSIBLE
CAUSE
Incompatibility between the PDF file and the Acrobat products.
Before printing, the machine emits vapor near the output tray.
Using damp paper can cause vapor during printing.
SUGGESTED SOLUTIONS
Printing the PDF file as an image may solve this problem. Turn on Print As
Image from the Acrobat printing options.
It will take longer to print when you print a
PDF file as an image.
Your machine has an odd smell during initial use.
The oil used to protect the fuser is evaporating.
After printing about 100 color pages, there will be no more smell. It is a temporary issue.
The print quality of photos is not good. Images are not clear.
The resolution of the photo is very low.
Reduce the photo size. If you increase the photo size in the software application, the resolution will be reduced.
This is not a problem. Just keep printing.
Printing quality problems
If the inside of the machine is dirty or paper has been loaded improperly, you may notice a reduction in print quality. See the table below to clear the problem.
CONDITION SUGGESTED SOLUTIONS
Light or faded print
If a vertical white streak or faded area appears on the page:
• The toner supply is low. You may be able to temporarily extend the toner cartridge
life. See page 38. If this does not improve
the print quality, install a new toner cartridge.
• The paper may not meet paper specifications; for example, the paper is too
moist or too rough. See page 28.
• If the entire page is light, the print resolution setting is too low. Adjust the print resolution. See the help screen of the printer driver.
• A combination of faded or smeared defects may indicate that the toner cartridge needs cleaning.
• The surface of the LSU part inside the machine may be dirty. Clean the LSU by opening and closing the front cover several times and if the problem still occurs call the contact a service representative.
Troubleshooting_ 45
CONDITION
Toner specks
Aa Bb Cc
Aa Bb Cc
Aa Bb Cc
Aa Bb Cc
Aa Bb Cc
Dropouts
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
White Spots
SUGGESTED SOLUTIONS
• The paper may not meet specifications; for example, the paper is too moist or too
•
The paper path may need cleaning. See
"Cleaning the inside" on page 35.
If faded areas, generally rounded, occur randomly on the page:
• A single sheet of paper may be defective.
Try reprinting the job.
• The moisture content of the paper is uneven or the paper has moist spots on its surface. Try a different brand of paper. See
• The paper lot is bad. The manufacturing processes can cause some areas to reject toner. Try a different kind or brand of paper.
• Change the printer option and try again. Go to printer properties, click Paper tab, and set type to Thick Paper. Refer to the
Software section for details.
If these steps do not correct the problem, contact a service representative.
White spots appear on the page:
• The paper is too rough and a lot of dirt from the paper falls to the inner devices within the machine, which means the transfer belt may be dirty. Clean the inside of your machine. Contact a service representative.
• The paper path may need cleaning.
Contact a service representative.
Vertical lines
If black vertical streaks appear on the page:
• The imaging unit has probably been scratched. Remove the imaging unit and
install a new one. See page 39.
If white vertical streaks appear on the page:
• The surface of the LSU part inside the machine may be dirty. Clean the LSU by opening and closing the front cover several times and if the problem still occurs call the contact a service representative.
CONDITION
Color or Black background
Toner smear
SUGGESTED SOLUTIONS
If the amount of background shading becomes unacceptable:
• Change to a lighter weight paper. See
• Check the machine’s environment: very dry
(low humidity) or high humidity (higher than
80% RH) conditions can increase the amount of background shading.
• Remove the old toner cartridge and install
• Clean the inside of the machine. See page
• Check the paper type and quality. See page
• Remove the toner cartridge and install a
Vertical repetitive defects
If marks repeatedly appear on the printed side of the page at even intervals:
• The toner cartridge may be damaged. If a repetitive mark occurs on the page, print a cleaning sheet several times to clean the cartridge. After the printout, if you still have the same problems, remove the toner cartridge and install a new one. See page
• Parts of the machine may have toner on them. If the defects occur on the back of the page, the problem will likely correct itself after a few more pages.
• The fusing assembly may be damaged.
Contact a service representative.
Background scatter
Background scatter results from bits of toner randomly distributed on the printed page.
• The paper may be too damp. Try printing with a different batch of paper. Do not open
A
packages of paper until necessary so that the paper does not absorb too much moisture.
• If background scatter occurs on an envelope, change the printing layout to avoid printing over areas that have overlapping seams on the reverse side.
Printing on seams can cause problems.
• If background scatter covers the entire surface area of a printed page, adjust the print resolution through your software application or the printer properties.
46 _Troubleshooting
CONDITION
Misformed characters
SUGGESTED SOLUTIONS
• If characters are improperly formed and producing hollow images, the paper stock may be too slick. Try a different paper. See
Page skew
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
• Ensure that the paper is loaded properly.
• Check the paper type and quality. See page
• Ensure that the paper or other material is loaded correctly and the guides are not too tight or too loose against the paper stack.
Curl or wave
• Ensure that the paper is loaded properly.
• Check the paper type and quality. Both high temperature and humidity can cause paper
• Turn over the stack of paper in the tray. Also try rotating the paper 180° in the tray.
Wrinkles or creases • Ensure that the paper is loaded properly.
• Check the paper type and quality. See page
• Turn over the stack of paper in the tray. Also try rotating the paper 180° in the tray.
Back of printouts are dirty
• Check for leaking toner. Clean the inside of
CONDITION
Solid Color or
Black pages
A
SUGGESTED SOLUTIONS
• The toner cartridge may not be installed properly. Remove the cartridge and reinsert it.
• The toner cartridge may be defective and need replacing. Remove the toner cartridge
and install a new one. See page 38.
• The machine may require repair. Contact a service representative.
Loose toner
• Clean the inside of the machine. See page
• Check the paper type and quality. See page
• Remove the toner cartridge and install a
• If the problem persists, the machine may require repair. Contact a service representative.
Character Voids
A
Horizontal stripes
Curl
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Character voids are white areas within parts of characters that should be solid black:
• If you are using transparencies, try another type of transparency. Because of the composition of transparencies, some character voids are normal.
• You may be printing on the wrong surface of the paper. Remove the paper and turn it around.
• The paper may not meet paper
If horizontally aligned black streaks or smears appear:
• The toner cartridge may be installed improperly. Remove the cartridge and reinsert it.
• The toner cartridge may be defective.
Remove the toner cartridge and install a
• If the problem persists, the machine may require repair. Contact a service representative.
If the printed paper is curled or paper does not feed into the machine:
• Turn over the stack of paper in the tray.
Also try rotating the paper 180° in the tray.
• Change the printer option and try again. Go to printer properties, click Paper tab, and set type to Thin Paper. Refer to the
Software section for details.
An unknown image repetitively appears on a next few sheets or loose toner, light print, or contamination occurs.
Your printer is probably being used at an altitude of 1,000 m (3,281 ft) or above.
The high altitude may affect the print quality such as loose toner or light imaging. You can set this option through Printer Settings Utility or Printer tab in printer driver’s properties. See
Troubleshooting_ 47
Common Windows problems
CONDITION
“File in Use” message appears during installation.
“General Protection
Fault”, “Exception
OE”, “Spool32”, or
“Illegal Operation” messages appear.
SUGGESTED SOLUTIONS
Exit all software applications. Remove all software from the StartUp Group, then restart
Windows. Reinstall the printer driver.
Close all other applications, reboot Windows and try printing again.
“Fail To Print”, “A printer timeout error occurred.” messages appear.
These messages may appear during printing.
Just keep waiting until the machine finishes printing. If the message appears in ready mode or after printing has been completed, check the connection and/or whether an error has occurred.
Refer to the Microsoft Windows documentation that came with your computer for further information on Windows error messages.
Common Linux problems
CONDITION
The machine does not print.
Some color images come out all black.
SUGGESTED SOLUTIONS
• Check if the printer driver is installed in your system. Open Unified Driver Configurator and switch to the Printers tab in Printers configuration window to look at the list of available printers. Make sure that your machine is displayed on the list. If not, please, invoke Add new printer wizard to set up your device.
• Check if the printer is started. Open Printers configuration and select your machine on the printers list. Look at the description in the
Selected printer pane. If its status contains
“(stopped)” string, please, press the Start button. After that normal operation of the printer should be restored. The "stopped" status might be activated when some problems in printing occurred.
• Check if your application has special print option such as “-oraw”. If “-oraw” is specified in the command line parameter then remove it to print properly. For Gimp front-end, select
“print” -> “Setup printer” and edit command line parameter in the command item.
This is a known bug in Ghostscript (until GNU
Ghostscript version 7.05) when the base color space of the document is indexed color space and it is converted through CIE color space.
Because Postscript uses CIE color space for
Color Matching System, you should upgrade
Ghostscript on your system to at least GNU
Ghostscript version 7.06 or later. You can find recent Ghostscript versions at www.ghostscript.com.
48 _Troubleshooting
CONDITION
Some color images come out in unexpected color.
SUGGESTED SOLUTIONS
This is a known bug in Ghostscript (until GNU
Ghostscript version 7.xx) when the base color space of the document is indexed RGB color space and it is converted through CIE color space. Because Postscript uses CIE color space for Color Matching System, you should upgrade Ghostscript on your system to at least
GNU Ghostscript version 8.xx or later. You can find recent Ghostscript versions at www.ghostscript.com.
The machine does not print whole pages and its output is half page printed.
It is a known problem that occurs when a color printer is used on version 8.51 or earlier of
Ghostscript, 64-bit Linux OS, and reported to bugs.ghostscript.com as Ghostscript Bug
688252.
The problem is solved in AFPL Ghostscript v.
8.52 or above. Download the latest version of
AFPL Ghostscript from http://sourceforge.net/ projects/ghostscript/ and install it to solve this problem.
I encounter error
“Unable to open mfp port device file!” when printing a document.
When printing a document over the network in SuSE 9.2, the printer does not print.
Please avoid changing print job parameters (via
LPR GUI, for example) while a print job is in progress. Known versions of CUPS server break the print job whenever print options are changed and then try to restart the job from the beginning. Since Unified Linux Driver locks mfp port while printing, the abrupt termination of the driver keeps the port locked and therefore unavailable for subsequent print jobs. If this situation occurred, please, try to release the mfp port.
The CUPS (Common Unix Printing System) version distributed with SuSE Linux 9.2
(cups-1.1.21) has a problem with ipp
(Internet Printing Protocol) printing. Use the socket printing instead of ipp or install later version of CUPS (cups-1.1.22 or higher).
Refer to Linux User’s Guide that came with your computer for further information on Linux error messages.
Common Macintosh problems
CONDITION SUGGESTED SOLUTIONS
The printer does not print PDF file correctly.
Some parts of graphics, text, or illustrations are missing.
Incompatibility between the PDF file and the Acrobat products:
Printing the PDF file as an image may solve this problem. Turn on Print As
Image from the Acrobat printing options.
It will take longer to print when you print a PDF file as an image.
The document has printed, but the print job has not disappeared from the spooler in Mac
OS 10.3.2.
Update your Mac OS to OS 10.3.3. or higher.
Some letters are not displayed normally during the Cover page printing.
This problem is caused because Mac OS cannot create the font during the Cover page printing. English alphabet and numbers are displayed normally at the
Cover page.
Refer to Mac OS User’s Guide that came with your computer for further information on Mac OS error messages.
Troubleshooting_ 49
ordering supplies and accessories
This chapter provides information on purchasing cartridges and accessories available for your machine.
This chapter includes:
•
•
The optional parts or features may differ by countries. Contact your sales representatives whether the part you want is available in your country.
HOW TO PURCHASE
To order Samsung-authorized supplies or accessories, contact your local
Samsung dealer or the retailer where you purchased your machine, or visit www.samsung.com/supplies and select your country/region to obtain information on calling for technical support.
SUPPLIES
When the toner runs out, you can order the following type of toner cartridge for your machine:
TYPE
Standard yield a toner cartridge
• Average continuous black cartridge yield:
1,500 standard pages (Black)
• Average continuous color cartridge yield:
1,000 standard pages (Yellow/
Magenta/Cyan)
Standard yield
Imaging Unit
Waste toner container
AVERAGE YIELD
Approx. 24,000 images c
Approx. 10,000 images c
PART NUMBER
CLT-K409S (Black)
CLT-C409S (Cyan)
CLT-M409S (Magenta)
CLT-Y409S (Yellow)
Region A b
CLT-K4092S (Black)
CLT-C4092S (Cyan)
CLT-M4092S (Magenta)
CLT-Y4092S (Yellow)
CLT-R409
CLT-W409 a. Declared yield value in accordance with ISO/IEC 19798.
b. Region A:Albania, Austria, Belgium, Bosnia, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Italy, Macedonia, Netherlands, Norway, Poland, Portugal,
Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, UK, c. Image counts based on one color on each page. If you print documents in full color (Cyan, Magenta, Yellow, Black), the life of this item will be reduced by 25%.
When you purchase a new toner cartridge or supplies, you must purchase them in the same country you have purchased your machine.
Otherwise, the toner cartridge or supplies will be incompatible with your machine since the configuration of the toner cartridge or supplies vary depending on the countries.
Ordering supplies and accessories_ 50
specifications
This chapter guides you about this machine’s specifications such as various features.
This chapter include:
•
•
GENERAL SPECIFICATIONS
The symbol * optional feature depending on machines.
ITEM
Paper input capacity
DESCRIPTION
Tray: 150 sheets for plain paper, 75 g/m
2
(20 lb bond)
For details about paper input capacity, see 29 page.
Face down: 100 sheets 75 g/m
2
(20 lb bond)
Paper output capacity
Power rating
Power consumption
AC 110 - 127 V or AC 220 - 240 V
See the Rating label on the machine for the correct voltage, frequency (hertz) and type of current for your machine.
• Average operating mode: Less than 350 WH
• Ready mode: Less than 80 WH
• Power Save mode: Less than 10 WH
• Power off mode: 0 WH
Noise Level a
Default time to power save mode from ready mode
Ready mode: Background noise level
Printing mode
Black & White: Less than 47 dBA
Color: Less than 45 dBA
15 Minutes
Warm-up time
Less than 35 seconds (Coldboot)
Operating environment
Toner cartridge life b
Temperature: 10 to 32 °C (50 to 90 °F)
Humidity: 20 to 80% RH
Black Average continuous black cartridge yield: 1,500 standard pages
(Shipped with 1,000 pages Starter toner cartridge.)
Color
(Yellow/
Magenta/
Cyan)
Average continuous color cartridge yield: 1,000 standard pages
(Shipped with 700 pages Starter toner cartridge.)
Approx. 24,000 images c
Imaging Unit life
Waste toner container
Approx. 10,000 images
ITEM
Memory
DESCRIPTION
• CLP-310, CLP-310N,CLP-315,CLP-315N: 32 MB
(Non-extendable)
• CLP-310W, CLP-315W: 64 MB (Non-extendable)
External dimension
(W x D x H)
Weight
(Including consumables)
Package weight
Duty cycle
388 x 313 x 243 mm
(15.3 x 12.3 x 9.6 inches)
11.41 Kg (25.16 lbs)
Paper: 1.84 Kg (4.06 lbs)
Plastic: 0.26 Kg (0.57 lbs)
Up to 20,000 images (Monthly)
Fusing temperature
180 °C (356 °F) a. Sound Pressure Level, ISO 7779 b. Declared yield value in accordance with ISO/IEC 19798. The number of pages may be affected by operating environment, printing interval, media type, and media size.
c. Image counts based on one color on each page. If you print documents in full color (Black, Cyan, Magenta, Yellow), the life of this item will be reduced by 25%.
51 _Specifications
PRINTER SPECIFICATIONS
ITEM
Printing method
Printing speed a
DESCRIPTION
Color laser beam printing
First print out time
• Black and white: Up to 16 ppm (A4), 17 ppm
(Letter)
• Color: Up to 4 ppm (A4/Letter)
Black &
White
Color
From ready: Less than 14 seconds
From ready: Less than 26 seconds
Print resolution
Max. 2,400 x 600 dpi effective output
Printer language
SPL-C
OS compatibility b
• Windows: 2000/XP/2003/Vista/2008
• Linux: RedHat 8.0~9.0, Mandrake 9.2~10.1,
SuSE 8.2~9.2, Fedra Core 1~4
• Macintosh: Mac OS X 10.3~10.5, Universal Mac
Interface
• High speed USB 2.0
• CLP-310N, CLP-310W, CLP-315N, CLP-315W only: Ethernet 10/100 Base TX wired LAN
(embedded type)
• CLP-310W,CLP-315W only: 802.11 b/g wireless
LAN a. It will be affected by operating system used, computing performance, application software, connecting method, media type, media size and job complexity.
b. Visit www.samsungprinter.com to download the latest software version.
52 _Specifications
glossary
The following glossary helps you get familiar with the product by understanding the terminologies commonly used with printing as well as mentioned in this user's guide.
ADF
An Automatic Document Feeder (ADF) is a mechanism that will automatically feed an original sheet of paper so that the machine can scan some amount of the paper at once.
AppleTalk
AppleTalk is a proprietary suite of protocols developed by Apple, Inc for computer networking. It was included in the original Macintosh (1984) and is now deprecated by Apple in favor of TCP/IP networking.
BIT Depth
A computer graphics term describing the number of bits used to represent the color of a single pixel in a bitmapped image. Higher color depth gives a broader range of distinct colors. As the number of bits increases, the number of possible colors becomes impractically large for a color map. 1-bit color is commonly called as monochrome or black and white.
BMP
A bitmapped graphics format used internally by the Microsoft Windows graphics subsystem (GDI), and used commonly as a simple graphics file format on that platform.
BOOTP
Bootstrap Protocol. A network protocol used by a network client to obtain its IP address automatically. This is usually done in the bootstrap process of computers or operating systems running on them. The
BOOTP servers assign the IP address from a pool of addresses to each client. BOOTP enables 'diskless workstation' computers to obtain an IP address prior to loading any advanced operating system.
CCD
Charge Coupled Device (CCD) is a hardware which enables the scan job. CCD Locking mechanism is also used to hold the CCD module to prevent any damage when you move the machine.
Collation
Collation is a process of printing a multiple-copy job in sets. When collation is selected, the device prints an entire set before printing additional copies.
Control Panel
A control panel is a flat, typically vertical, area where control or monitoring instruments are displayed. They are typically found in front of the machine.
Coverage
It is the printing term used for a toner usage measurement on printing.
For example, 5% coverage means that an A4 sided paper has about 5% image or text on it. So, if the paper or original has complicated images or lots of text on it, the coverage will be higher and at the same time, a toner usage will be as much as the coverage.
CSV
Comma Separated Values (CSV). A type of file format, CSV is used to exchange data between disparate applications. The file format, as it is used in Microsoft Excel, has become a pseudo standard throughout the industry, even among non-Microsoft platforms.
53 _Glossary
DADF
A Duplex Automatic Document Feeder (DADF) is a mechanism that will automatically feed and flip over an original sheet of paper so that the machine can scan on both sides of the paper.
Default
The value or setting that is in effect when taking a printer out of its box state, reset, or initialized.
DHCP
A Dynamic Host Configuration Protocol (DHCP) is a client-server networking protocol. A DHCP server provides configuration parameters specific to the DHCP client host requesting, generally, information required by the client host to participate on an IP network. DHCP also provides a mechanism for allocation of IP addresses to client hosts.
DIMM
Dual Inline Memory Module (DIMM), a small circuit board that holds memory. DIMM stores all the data within the machine like printing data, received fax data.
DNS
The Domain Name Server (DNS) is a system that stores information associated with domain names in a distributed database on networks, such as the Internet.
Dot Matrix Printer
A dot matrix printer refers to a type of computer printer with a print head that runs back and forth on the page and prints by impact, striking an ink-soaked cloth ribbon against the paper, much like a typewriter.
DPI
Dots Per Inch (DPI) is a measurement of resolution that is used for scanning and printing. Generally, higher DPI results in a higher resolution, more visible detail in the image, and a larger file size.
DRPD
Distinctive Ring Pattern Detection. Distinctive Ring is a telephone company service which enables a user to use a single telephone line to answer several different telephone numbers.
Duplex
A mechanism that will automatically flip over a sheet of paper so that the machine can print (or scan) on both sides of the paper. A printer equipped with a Duplex can print double-sided of paper.
Duty Cycle
Duty cycle is the page quantity which does not affect printer performance for a month. Generally the printer has the lifespan limitation such as pages per year. The lifespan means the average capacity of print-outs, usually within the warranty period. For example, if the duty cycle is 48,000 pages per month assuming 20 working days, a printer limits 2,400 pages a day.
ECM
Error Correction Mode (ECM) is an optional transmission mode built into
Class 1 fax machines or fax modems. It automatically detects and corrects errors in the fax transmission process that are sometimes caused by telephone line noise.
Emulation
Emulation is a technique of one machine obtaining the same results as another.
An emulator duplicates the functions of one system with a different system, so that the second system behaves like the first system.
Emulation focuses on exact reproduction of external behavior, which is in contrast to simulation, which concerns an abstract model of the system being simulated, often considering its internal state.
Ethernet
Ethernet is a frame-based computer networking technology for local area networks (LANs). It defines wiring and signaling for the physical layer, and frame formats and protocols for the media access control
(MAC)/data link layer of the OSI model. Ethernet is mostly standardized as IEEE 802.3. It has become the most widespread LAN technology in use during the 1990s to the present.
EtherTalk
A suite of protocols developed by Apple Computer for computer networking. It was included in the original Macintosh (1984) and is now deprecated by Apple in favor of TCP/IP networking.
FDI
Foreign Device Interface (FDI) is a card installed inside the machine to allow a third party device such as a coin operated device or a card reader. Those devices allow the pay-for-print service on your machine.
FTP
A File Transfer Protocol (FTP) is a commonly used protocol for exchanging files over any network that supports the TCP/IP protocol
(such as the Internet or an intranet).
Fuser Unit
The part of a laser printer that melts the toner onto the print media. It consists of a hot roller and a back-up roller. After toner is transferred onto the paper, the fuser unit applies heat and pressure to ensure that the toner stays on the paper permanently, which is why paper is warm when it comes out of a laser printer.
Gateway
A connection between computer networks, or between a computer network and a telephone line. It is very popular, as it is a computer or a network that allows access to another computer or network.
Grayscale
A shades of gray that represent light and dark portions of an image when color images are converted to grayscale; colors are represented by various shades of gray.
Halftone
An image type that simulates grayscale by varying the number of dots.
Highly colored areas consist of a large number of dots, while lighter areas consist of a smaller number of dots.
HDD
Hard Disk Drive (HDD), commonly referred to as a hard drive or hard disk, is a non-volatile storage device which stores digitally-encoded data on rapidly rotating platters with magnetic surfaces.
IEEE
The Institute of Electrical and Electronics Engineers (IEEE) is an international non-profit, professional organization for the advancement of technology related to electricity.
IEEE 1284
The 1284 parallel port standard was developed by the Institute of
Electrical and Electronics Engineers (IEEE). The term "1284-B" refers to a specific connector type on the end of the parallel cable that attaches to the peripheral (for example, a printer).
54 _Glossary
Intranet
A private network that uses Internet Protocols, network connectivity, and possibly the public telecommunication system to securely share part of an organization's information or operations with its employees.
Sometimes the term refers only to the most visible service, the internal website.
IP address
An Internet Protocol (IP) address is a unique number that devices use in order to identify and communicate with each other on a network utilizing the Internet Protocol standard.
IPM
The Images Per Minute (IPM) is a way of measuring the speed of a printer. An IPM rate indicates the number of single-sided sheets a printer can complete within one minute.
IPP
The Internet Printing Protocol (IPP) defines a standard protocol for printing as well as managing print jobs, media size, resolution, and so forth. IPP can be used locally or over the Internet to hundreds of printers, and also supports access control, authentication, and encryption, making it a much more capable and secure printing solution than older ones.
IPX/SPX
IPX/SPX stands for Internet Packet Exchange/Sequenced Packet
Exchange. It is a networking protocol used by the Novell NetWare operating systems. IPX and SPX both provide connection services similar to TCP/IP, with the IPX protocol having similarities to IP, and
SPX having similarities to TCP. IPX/SPX was primarily designed for local area networks (LANs), and is a very efficient protocol for this purpose (typically its performance exceeds that of TCP/IP on a LAN).
ISO
The International Organization for Standardization (ISO) is an international standard-setting body composed of representatives from national standards bodies. It produces world-wide industrial and commercial standards.
ITU-T
The International Telecommunication Union is an international organization established to standardize and regulate international radio and telecommunications. Its main tasks include standardization, allocation of the radio spectrum, and organizing interconnection arrangements between different countries to allow international phone calls. A -T out of ITU-T indicates telecommunication.
ITU-T No. 1 chart
Standardized test chart published by ITU-T for document facsimile transmissions.
JBIG
Joint Bi-level Image Experts Group (JBIG) is an image compression standard with no loss of accuracy or quality, which was designed for compression of binary images, particularly for faxes, but can also be used on other images.
JPEG
Joint Photographic Experts Group (JPEG) is a most commonly used standard method of lossy compression for photographic images. It is the format used for storing and transmitting photographs on the World Wide
Web.
LDAP
The Lightweight Directory Access Protocol (LDAP) is a networking protocol for querying and modifying directory services running over TCP/
IP.
LED
A Light-Emitting Diode (LED) is a semiconductor device that indicates the status of a machine.
MAC address
Media Access Control (MAC) address is a unique identifier associated with a network adapter. MAC address is a unique 48-bit identifier usually written as 12 hexadecimal characters grouped in pairs (e. g., 00-00-0c-
34-11-4e). This address is usually hard-coded into a Network Interface
Card (NIC) by its manufacturer, and used as an aid for routers trying to locate machines on large networks.
MFP
Multi Function Peripheral (MFP) is an office machine that includes the following functionality in one physical body, so as to have a printer, a copier, a fax, a scanner and etc.
MH
Modified Huffman (MH) is a compression method for decreasing the amount of data that needs to be transmitted between the fax machines to transfer the image recommended by ITU-T T.4. MH is a codebookbased run-length encoding scheme optimized to efficiently compress white space. As most faxes consist mostly of white space, this minimizes the transmission time of most faxes.
MMR
Modified Modified READ (MMR) is a compression method recommended by ITU-T T.6.
Modem
A device that modulates a carrier signal to encode digital information, and also demodulates such a carrier signal to decode transmitted information.
MR
Modified Read (MR) is a compression method recommended by ITU-T
T.4. MR encodes the first scanned line using MH. The next line is compared to the first, the differences determined, and then the differences are encoded and transmitted.
NetWare
A network operating system developed by Novell, Inc. It initially used cooperative multitasking to run various services on a PC, and the network protocols were based on the archetypal Xerox XNS stack.
Today NetWare supports TCP/IP as well as IPX/SPX.
OPC
Organic Photo Conductor (OPC) is a mechanism that makes a virtual image for print using a laser beam emitted from a laser printer, and it is usually green or gray colored and a cylinder shaped.
An exposing unit of a drum is slowly worn away by its usage of the printer, and it should be replaced appropriately since it gets scratches from grits of a paper.
Originals
The first example of something, such as a document, photograph or text, etc, which is copied, reproduced or translated to produce others, but which is not itself copied or derived from something else.
OSI
Open Systems Interconnection (OSI) is a model developed by the
International Organization for Standardization (ISO) for communications.
OSI offers a standard, modular approach to network design that divides the required set of complex functions into manageable, self-contained, functional layers. The layers are, from top to bottom, Application,
Presentation, Session, Transport, Network, Data Link and Physical.
PABX
A private automatic branch exchange (PABX) is an automatic telephone switching system within a private enterprise.
PCL
Printer Command Language (PCL) is a Page Description Language
(PDL) developed by HP as a printer protocol and has become an industry standard. Originally developed for early inkjet printers, PCL has been released in varying levels for thermal, matrix printer, and page printers.
Portable Document Format (PDF) is a proprietary file format developed by Adobe Systems for representing two dimensional documents in a device independent and resolution independent format.
PostScript
PostScript (PS) is a page description language and programming language used primarily in the electronic and desktop publishing areas. - that is run in an interpreter to generate an image.
Printer Driver
A program used to send commands and transfer data from the computer to the printer.
Print Media
The media like paper, envelopes, labels, and transparencies which can be used on a printer, a scanner, a fax or, a copier.
PPM
Pages Per Minute (PPM) is a method of measurement for determining how fast a printer works, meaning the number of pages a printer can produce in one minute.
PRN file
An interface for a device driver, this allows software to interact with the device driver using standard input/output system calls, which simplifies many tasks.
Protocol
A convention or standard that controls or enables the connection, communication, and data transfer between two computing endpoints.
PS
See PostScript.
PSTN
The Public-Switched Telephone Network (PSTN) is the network of the world's public circuit-switched telephone networks which, on industrial premises, is usually routed through the switchboard.
Resolution
The sharpness of an image, measured in Dots Per Inch (DPI). The higher the dpi, the greater the resolution.
SMB
Server Message Block (SMB) is a network protocol mainly applied to share files, printers, serial ports, and miscellaneous communications between nodes on a network. It also provides an authenticated Interprocess communication mechanism.
SMTP
Simple Mail Transfer Protocol (SMTP) is the standard for e-mail transmissions across the Internet. SMTP is a relatively simple, textbased protocol, where one or more recipients of a message are specified, and then the message text is transferred. It is a client-server protocol, where the client transmits an email message to the server.
Glossary_ 55
Subnet Mask
The subnet mask is used in conjunction with the network address to determine which part of the address is the network address and which part is the host address.
TCP/IP
The Transmission Control Protocol (TCP) and the Internet Protocol (IP); the set of communications protocols that implement the protocol stack on which the Internet and most commercial networks run.
TCR
Transmission Confirmation Report (TCR) provides details of each transmission such as job status, transmission result and number of pages sent. This report can be set to print after each job or only after failed transmissions.
TIFF
Tagged Image File Format (TIFF) is a variable-resolution bitmapped image format. TIFF describes image data that typically come from scanners. TIFF images make use of tags, keywords defining the characteristics of the image that is included in the file. This flexible and platform-independent format can be used for pictures that have been made by various image processing applications.
Toner Cartridge
A kind of bottle within a machine like printer which contains toner. Toner is a powder used in laser printers and photocopiers, which forms the text and images on the printed paper. Toner can be melted by the heat of the fuser, causing it to bind to the fibers in the paper.
TWAIN
An industry standard for scanners and software. By using a TWAINcompliant scanner with a TWAIN-compliant program, a scan can be initiated from within the program.; an image capture API for Microsoft
Windows and Apple Macintosh operating systems.
UNC Path
Uniform Naming Convention (UNC) is a standard way to access network shares in Window NT and other Microsoft products. The format of a
UNC path is: \\<servername>\<sharename>\<Additional directory>
URL
Uniform Resource Locator (URL) is the global address of documents and resources on the Internet. The first part of the address indicates what protocol to use, the second part specifies the IP address or the domain name where the resource is located.
USB
Universal Serial Bus (USB) is a standard that was developed by the
USB Implementers Forum, Inc., to connect computers and peripherals.
Unlike the parallel port, USB is designed to concurrently connect a single computer USB port to multiple peripherals.
Watermark
A watermark is a recognizable image or pattern in paper that appears lighter when viewed by transmitted light. Watermarks were first introduced in Bologna, Italy in 1282; they have been used by papermakers to identify their product, and also on postage stamps, currency, and other government documents to discourage counterfeiting.
WIA
Windows Imaging Architecture (WIA) is an imaging architecture that is originally introduced in Windows Me and Windows XP. A scan can be initiated from within these operating systems by using a WIA-compliant scanner.
56 _Glossary
A
index
adjustment
C
cleaning
control panel
D
demo page, print
J
jam
tips for avoiding paper jams 42
L
LED
Linux problems
M
Maintenance
N
network
P
paper
paper type
power save mode
print quality problems, solve
printing
problem, solve
R
replacing components
reports, print
S
status LED
stop button
supplies
expected toner cartridge life 37
T
toner LED
tray
adjusting the width and length 31
U
using
W
Windows problems
Index_57
58_Index
contact SAMSUNG worldwide
If you have any comments or questions regarding Samsung products, contact the Samsung customer care center.
COUNTRY CUSTOMER CARE CENTER WEB SITE
ARGENTINE
AUSTRALIA
AUSTRIA
BELGIUM
BRAZIL
CANADA
CHILE
CHINA
COLOMBIA
COSTA RICA
0800-333-3733
1300 362 603
0800-SAMSUNG (726-
7864)
02 201 2418 www.samsung.com/ar www.samsung.com/au www.samsung.com/at
0800-124-421
4004-0000
1-800-SAMSUNG (726-
7864) www.samsung.com/be www.samsung.com/br www.samsung.com/ca
800-SAMSUNG (726-7864) www.samsung.com/cl
800-810-5858
400-810-5858
010-6475 1880 www.samsung.com/cn
01-8000112112
0-800-507-7267 www.samsung.com.co
www.samsung.com/ latin
CZECH
REPUBLIC
DENMARK
ECUADOR
800-726-786 (800 -
SAMSUNG) www.samsung.com/cz
Samsung Zrt., ÄŤ eská organiza ÄŤ ní sloĹľka, Oasis
Florenc, Sokolovská394/17, 180 00, Praha 8
70 70 19 70
1-800-10-7267 www.samsung.com/dk www.samsung.com/ latin
EL
SALVADOR
800-6225
ESTONIA
800-7267
KAZAKHSTAN
8-10-800-500-55-500 www.samsung.com/ latin www.samsung.ee
www.samsung.com/ kz_ru
KYRGYZSTAN
00-800-500-55-500
FINLAND
030-6227 515
FRANCE
GERMANY
3260 SAMSUNG
08 25 08 65 65 (€ 0,15/min)
01805 - SAMSUNG (726-
7864 € 0,14/min)
GUATEMALA
1-800-299-0013 www.samsung.com/fi www.samsung.com/fr www.samsung.de
HONDURAS
HONG KONG
HUNGARY
800-7919267
3698 4698
06-80-SAMSUNG (726-
7864) www.samsung.com/ latin www.samsung.com/ latin www.samsung.com/hk www.samsung.com/hu
COUNTRY
INDIA
INDONESIA
ITALIA
JAMAICA
JAPAN
LATVIA
0120-327-527
8000-7267
LITHUANIA
8-800-77777
LUXEMBURG
02 261 03 710
MALAYSIA
MEXICO
NETHERLAND
S
NEW
ZEALAND
NICARAGUA
1800-88-9999
01-800-SAMSUNG (726-
7864)
0900 SAMSUNG(726-7864
€ 0,10/min)
0800 SAMSUNG (0800 726
786)
00-1800-5077267
NORWAY
PANAMA
PHILIPPINES
POLAND
1800-10-SAMSUNG (726-
7864)
0 801 801 881
022-607-93-33
PORTUGAL
80820-SAMSUNG (726-
7864)
PUERTO RICO
1-800-682-3180
REP.
DOMINICA
EIRE
RUSSIA
SINGAPORE
SLOVAKIA
SOUTH
AFRICA
CUSTOMER CARE CENTER
3030 8282
1800 110011
1-800-3000-8282
0800-112-8888
800-SAMSUNG(726-7864)
1-800-234-7267
815-56 480
800-7267
1-800-751-2676
0818 717 100
8-800-555-55-55
1800-SAMSUNG (726-
7864)
0800-SAMSUNG (726-
7864)
0860 SAMSUNG (724-
7864)
WEB SITE
www.samsung.com/in www.samsung.com/id www.samsung.com/it www.samsung.com/ latin www.samsung.com/jp www.samsung.com/lv www.samsung.com/lt www.samsung.com/lu www.samsung.com/my www.samsung.com/mx www.samsung.com/nl www.samsung.com/nz www.samsung.com/ latin www.samsung.com/no www.samsung.com/ latin www.samsung.com/ph www.samsung.com/pl www.samsung.com/pt www.samsung.com/ latin www.samsung.com/ latin www.samsung.com/ie www.samsung.ru
www.samsung.com/sg www.samsung.com/sk www.samsung.com/za
59 _Contact SAMSUNG worldwide
COUNTRY CUSTOMER CARE CENTER
SPAIN
SWEDEN
SWITZERLAN
D
902-1-SAMSU(72678)
0771-400 200
0800-SAMSUNG (726-
7864)
TADJIKISTAN
8-10-800-500-55-500
TAIWAN
0800-329-999
THAILAND
TRINIDAD &
TOBAGO
TURKEY
U.A.E
1800-29-3232
02-689-3232
1-800-SAMSUNG (726-
7864)
444 77 11
U.K
800-SAMSUNG (726-7864)
8000-4726
0845 SAMSUNG (726-
7864)
U.S.A
1-800-SAMSUNG (726-
7864)
UKRAINE
8-800-502-0000
UZBEKISTAN
8-10-800-500-55-500
VENEZUELA
VIETNAM
0-800-100-5303
1 800 588 889
WEB SITE
www.samsung.com/es www.samsung.com/se www.samsung.com/ch www.samsung.com/tw www.samsung.com/th www.samsung.com/ latin www.samsung.com/tr www.samsung.com/ae www.samsung.com/uk www.samsung.com/us www.samsung.ua
www.samsung.com/ kz_ru www.samsung.com/ latin www.samsung.com/vn
Contact SAMSUNG worldwide_ 60
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
This user’s guide is provided for information purposes only. All information included herein is subject to change without notice.
Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide.
• Samsung and Samsung logo are trademarks of Samsung Electronics Co., Ltd.
• Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation.
• UFST® and MicroType™ are registered trademarks of Monotype Imaging Inc.
• TrueType, LaserWriter and Macintosh are trademarks of Apple Computer, Inc.
• All other brand or product names are trademarks of their respective companies or organizations.
Samsung Printer
Software section
S
OFTWARE SECTION
C
ONTENTS
Chapter 1:
NSTALLING
P
RINTER
S
OFTWARE IN
W
INDOWS
Chapter 2:
ASIC
P
RINTING
Chapter 3:
DVANCED
P
RINTING
1
Chapter 4:
HARING THE
P
RINTER
L
OCALLY
Chapter 5:
SING
S
MART
P
ANEL
Chapter 6:
SING
Y
OUR
P
RINTER IN
L
INUX
2
Chapter 7:
SING
Y
OUR
P
RINTER WITH A
M
ACINTOSH
3
1
Installing Printer
Software in Windows
This chapter includes:
• Changing the Software Language
• Reinstalling Printer Software
• Installing mono printer driver
N
OTE
: The following procedure is based on Windows XP, for other operating systems, refer to the corresponding Windows user's guide or online help.
Installing Printer Software
You can install the printer software for local printing or network printing. To install the printer software on the computer, perform the appropriate installation procedure depending on the printer in use.
A printer driver is software that lets your computer communicate with your printer. The procedure to install drivers may differ depending on the operating system you are using.
All applications should be closed on your PC before beginning installation.
Installing Software for Local Printing
A local printer is a printer directly attached to your computer using the printer cable supplied with your printer, such as a USB or parallel cable. If your printer is attached to a network, skip
this step and go to “Installing Software for Network Printing” on page 7.
You can install the printer software using the typical or custom method.
N
OTE
: If the “New Hardware Wizard” window appears during the installation procedure, click in the upper right corner of the box to close the window, or click Cancel.
Typical Installation
This is recommended for most users. All components necessary for printer operations will be installed.
1
Make sure that the printer is connected to your computer and powered on.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation window appears.
If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK.
If you use Windows Vista, click Start → All programs →
Accessories → Run, and type X:\Setup.exe.
If the AutoPlay window appears in Windows Vista, click
Run Setup.exe in Install or run program field, and click Continue in the User Account Control window.
3
Click Next.
• If necessary, select a language from the drop-down list.
• View User’s Guide: Allows you to view the User’s
Guide. If your computer doesn’t have Adobe Acrobat, click on this option and it will automatically install Adobe
Acrobat Reader for you.
4
Select Typical installation for a local printer. Click
Next.
4
Installing Printer Software in Windows
N
OTE
: If your printer is not already connected to the computer, the following window will appear.
• After connecting the printer, click Next.
• If you don’t want to connect the printer at this time, click
Next, and No on the following screen. Then the installation will start and a test page will not be printed at the end of the installation.
• The installation window that appears in this User’s
Guide may differ depending on the printer and interface in use.
5
After the installation is finished, a window asking you to print a test page appears. If you choose to print a test page, select the checkbox and click Next.
Otherwise, just click Next and skip to step 7.
6
If the test page prints out correctly, click Yes.
If not, click No to reprint it.
7
To register yourself as a user of Samsung Printers in order to receive information from Samsung, select the checkbox and click Finish. You are now sent to the Samsung web site.
Otherwise, just click Finish.
N
OTE
: After setup is complete, if your printer driver doesn’t
work properly, reinstall the printer driver. See “Reinstalling
Custom Installation
You can choose individual components to install.
1
Make sure that the printer is connected to your computer and powered on.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation window appears.
If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK.
If you use Windows Vista, click Start → All programs →
Accessories → Run, and type X:\Setup.exe.
If the AutoPlay window appears in Windows Vista, click
Run Setup.exe in Install or run program field, and click Continue in the User Account Control window.
3
Click Next.
• If necessary, select a language from the drop-down list.
• View User’s Guide: Allows you to view the User’s
Guide. If your computer doesn’t have Adobe Acrobat, click on this option and it will automatically install Adobe
Acrobat Reader for you.
5
Installing Printer Software in Windows
4
Select Custom installation. Click Next.
• The installation window that appears in this User’s
Guide may differ depending on the printer and interface in use.
6
Select the components to be installed and click Next.
5
Select your printer and click Next.
N
OTE
: If your printer is not already connected to the computer, the following window will appear.
N
OTE
: You can change the desired installation folder by clicking [Browse].
7
After the installation is finished, a window asking you to print a test page appears. If you choose to print a test page, select the checkbox and click Next.
Otherwise, just click Next and skip to step 9.
8
If the test page prints out correctly, click Yes.
If not, click No to reprint it.
9
To register yourself as a user of Samsung Printers in order to receive information from Samsung, select the checkbox and click Finish. You are now sent to the Samsung web site.
Otherwise, just click Finish.
• After connecting the printer, click Next.
• If you don’t want to connect the printer at this time, click
Next, and No on the following screen. Then the installation will start and a test page will not be printed at the end of the installation.
6
Installing Printer Software in Windows
Installing Software for Network
Printing
When you connect your printer to a network, you must first configure the TCP/IP settings for the printer. After you have assigned and verified the TCP/IP settings, you are ready to install the software on each computer on the network.
You can install the printer software using the typical or custom method.
Typical Installation
This is recommended for most users. All components necessary for printer operations will be installed.
1
Make sure that the printer is connected to your network and powered on. For details about connecting to the network, see the supplied printer’s User’s Guide.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation window appears.
If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK.
If you use Windows Vista, click Start → All programs →
Accessories → Run, and type X:\Setup.exe.
If the AutoPlay window appears in Windows Vista, click
Run Setup.exe in Install or run program field, and click Continue in the User Account Control window.
3
Click Next.
4
Select Typical installation for a network printer. Click
Next.
N
OTE
: If your printer is not connected to the network, the following window will appear. Select a setup option you want, click Next.
Then the Set IP Address window appears. Do as follows:
• If necessary, select a language from the drop-down list.
• View User’s Guide: Allows you to view the User’s
Guide. If your computer doesn’t have Adobe Acrobat, click on this option and it will automatically install Adobe
Acrobat Reader for you.
1.Select a printer to be set with a specific IP address from the
list.
7
Installing Printer Software in Windows
2.Configure an IP address, subnet mask, and gateway for the
printer manually and click Configure to set the specific IP
address for the network printer.
3.Click Next, and go to step to step 6.
• You can also set the network printer via SyncThru
TM
Web
Service, an embedded web server. Click Launch SWS on
Set IP Address window. Your machine’s embedded website opens.
5
The list of printers available on the network appears.
Select the printer you want to install from the list and then click Next.
6
After the installation is finished, a window appears asking you to print a test page and to register yourself as a user of Samsung Printers in order to receive information from
Samsung. If you so desire, select the corresponding checkbox(es) and click Finish.
Otherwise, just click Finish.
• If you do not see your printer on the list, click Update to refresh the list, or select Add TCP/IP Port to add your printer to the network. To add the printer to the network, enter the port name and the IP address for the printer.
To verify your printer’s IP address or the MAC address, print a Network Configuration page.
• To find a shared network printer (UNC Path), select
Shared Printer [UNC] and enter the shared name manually or find a shared printer by clicking the Browse button.
N
OTE
: If you cannot find your machine in network, please turn off the firewall and click Update.
For Windows operating system, Start → Control Panel and start windows firewall, and set this option unactivated. For other operating system, refer to its on-line guide.
N
OTE
: After setup is complete, if your printer driver doesn’t
work properly, reinstall the printer driver. See “Reinstalling
Custom Installation
You can choose individual components to install and set a specific IP address.
1
Make sure that the printer is connected to your network and powered on. For details about connecting to the network, see the supplied printer’s User’s Guide.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation window appears.
If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK.
If you use Windows Vista, click Start → All programs →
Accessories → Run, and type X:\Setup.exe.
If the AutoPlay window appears in Windows Vista, click
Run Setup.exe in Install or run program field, and click Continue in the User Account Control window.
8
Installing Printer Software in Windows
3
Click Next.
• If necessary, select a language from the drop-down list.
• View User’s Guide: Allows you to view the User’s
Guide. If your computer doesn’t have Adobe Acrobat, click on this option and it will automatically install Adobe
Acrobat Reader for you.
4
Select Custom installation. Click Next.
• If you do not see your printer on the list, click Update to refresh the list, or select Add TCP/IP Port to add your printer to the network. To add the printer to the network, enter the port name and the IP address for the printer.
To verify your printer’s IP address or the MAC address, print a Network Configuration page.
• To find a shared network printer (UNC Path), select
Shared Printer [UNC] and enter the shared name manually or find a shared printer by clicking the Browse button.
N
OTE
: If you cannot find your machine in network, please turn off the firewall and click Update.
For Windows operating system, Start → Control Panel and start windows firewall, and set this option unactivated. For other operating system, refer to its on-line guide.
T
IP
: If you want to set a specific IP address on a specific network printer, click the Set IP Address button. The Set IP
Address window appears. Do as follows:
5
The list of printers available on the network appears.
Select the printer you want to install from the list and then click Next. a. Select a printer to be set with a specific IP address from the list.
b. Configure an IP address, subnet mask, and gateway for the printer manually and click Configure to set the specific IP address for the network printer.
c. Click Next.
• You can also set the network printer via SyncThru
TM
Web
Service, an embedded web server. Click Launch SWS on
Set IP Address window. Your machine’s embedded website opens.
6
Select the components to be installed. After selecting the components, the following window appears. You can also change the printer name, set the printer to be shared on
9
Installing Printer Software in Windows
the network, set the printer as the default printer, and change the port name of each printer. Click Next.
To install this software on a server, select the Setting up
this printer on a server checkbox.
7
After the installation is finished, a window appears asking you to print a test page and to register yourself as a user of Samsung Printers in order to receive information from
Samsung. If you so desire, select the corresponding checkbox(es) and click Finish.
Otherwise, just click Finish.
Changing the Software
Language
After installation of the software, you can change the display language.
1
Click the Windows Start menu.
2
Select Programs or All Programs and then your printer
driver name.
3
Select Language Selection.
4
Select the desired language from the language selection window, and click OK.
Reinstalling Printer Software
You can reinstall the software if installation fails.
1
Start Windows.
2
From the Start menu select Programs or All Programs →
your printer driver name → Maintenance.
3
Select Repair and click Next .
4
The list of printers available on the network appears.
Select the printer you want to install from the list and then click Next.
N
OTE
: After setup is complete, if your printer driver doesn’t
work properly, reinstall the printer driver. See “Reinstalling
10
Installing Printer Software in Windows
• If you do not see your printer on the list, click Update to refresh the list, or select Add TCP/IP Port to add your printer to the network. To add the printer to the network, enter the port name and the IP address for the printer.
• To find a shared network printer (UNC Path), select
Shared Printer [UNC] and enter the shared name manually or find a shared printer by clicking the Browse button.
You will see a component list so that you can reinstall any item individually.
N
OTE
: If your printer is not already connected to the computer, the following window will appear.
Installing mono printer driver
This printer provides you the printer drivers with a mono driver so you can use your printer as a monochrome printer. You must install the mono driver on your computer. Following steps guide you through the step by step installation process.
1
Make sure that the printer is connected to your computer and powered on. Or your computer and printer are connected to the network.
2
Insert the supplied CD-ROM into your CD-ROM drive. The
CD-ROM should automatically run, and an installation window appears.
3
Click Cancel.
• After connecting the printer, click Next.
• If you don’t want to connect the printer at this time, click
Next, and No on the following screen. Then the installation will start and a test page will not be printed at the end of the installation.
• The reinstallation window that appears in this User’s
Guide may differ depending on the printer and interface in use.
5
Select the components you want to reinstall and click
Next
.
If you installed the printer software for local printing and you select your printer driver name, the window asking you to print a test page appears. Do as follows: a. To print a test page, select the check box and click
Next
.
b. If the test page prints out correctly, click Yes.
If it doesn’t, click No to reprint it.
6
When the reinstallation is done, click Finish.
Removing Printer Software
If the confirmation window appears, click Finish.
4
Click Start → Printers and Faxes.
5
Select Add Printer.
6
When Add Printer Wizard appears, click Next.
7
Select Local printer attached to this computer, and
Automatically detect and install my Plug and Play
printer, then click Next. Go to step 13.
If your computer does not find the printer, then follow the next step.
8
Select Next in the Select a Printer Port window.
9
In the Select a Printer Port window, select Have Disk....
10
Click Browse to find a mono driver for your printer.
1
Start Windows.
2
From the Start menu select Programs or All Programs →
your printer driver name → Maintenance.
3
Select Remove and click Next.
You will see a component list so that you can remove any item individually.
4
Select the components you want to remove and then click
Next.
5
When your computer asks you to confirm your selection, click Yes.
The selected driver and all of its components are removed from your computer.
6
After the software is removed, click Finish.
11 ex) Windows XP 32 bit
Select CD-ROM drive → Printer → SPL_MONO →
WINXP_2000_VISTA-32
11
Select ***.inf file and click Open.
12
Click OK in the Install From Disk window.
13
Select a mono driver in the Printers field, and click Next.
N
OTE
: If you have installed a mono driver before, then the
Use Existing Driver window. Select as the window explains, and click Next. Also, depending on your computer configuration, the printer sharing window or the print the test page window may appear; make the appropriate selection.
Installing Printer Software in Windows
14
Enter your printer name, and click Next.
15
Click Finish to start installing a mono printer driver.
N
OTE
: If your printer is connected to a network, go to printer's Properties and select the Ports tab, then click Add
Portand Standard TCP/IP Port, and create a new port to connect to the printer. To create a new port, follow the procedure laid out in the wizard window.
12
Installing Printer Software in Windows
2
Basic Printing
This chapter explains the printing options and common printing tasks in Windows.
This chapter includes:
Printing a Document
N
OTES
:
• Your printer driver Properties window that appears in this
User’s Guide may differ depending on the printer in use.
However the composition of the printer properties window is similar.
• Check the Operating System(s) that are compatible with your printer. Please refer to the OS Compatibility section of Printer Specifications in your Printer User’s
Guide.
• If you need to know the exact name of your printer, you can check the supplied CD-ROM.
• When you select an option in printer properties, you may see an exclamation mark or mark. An exclamation mark means you can select that certain option but it is not recommended, and mark means you cannot select that option due to the machineís setting or environment.
The following procedure describes the general steps required for printing from various Windows applications. The exact steps for printing a document may vary depending on the application program you are using. Refer to the User’s Guide of your software application for the exact printing procedure.
13
Basic Printing
1
Open the document you want to print.
2
Select Print from the File menu. The Print window is displayed. It may look slightly different depending on your application.
The basic print settings are selected within the Print window. These settings include the number of copies and print range.
Make sure that your printer is selected.
3
Select your printer driver from the Name drop-down list.
To take advantage of the printer features provided by your printer driver, click Properties or Preferences in the
application’s Print window. For details, see “Printer
If you see Setup, Printer, or Options in your Print window, click it instead. Then click Properties on the next screen.
Click OK to close the printer properties window.
4
To start the print job, click OK or Print in the Print window.
Printing to a file (PRN)
You will sometimes need to save the print data as a file for your purpose.
To create a file:
1
Check the Print to file box at the Print window.
2
Select the folder and assign a name of the file and then click OK.
Printer Settings
You can use the printer properties window, which allows you to access all of the printer options you need when using your printer. When the printer properties are displayed, you can review and change the settings needed for your print job.
Your printer properties window may differ, depending on your operating system. This Software User’s Guide shows the
Properties window for Windows XP.
Your printer driver Properties window that appears in this
User’s Guide may differ depending on the printer in use.
If you access printer properties through the Printers folder, you can view additional Windows-based tabs (refer to your
Windows User’s Guide) and the Printer tab (see “Printer Tab” on page 18).
N
OTES
:
• Most Windows applications will override settings you specify in the printer driver. Change all print settings available in the software application first, and change any remaining settings using the printer driver.
• The settings you change remain in effect only while you are using the current program. To make your changes
permanent, make them in the Printers folder.
• The following procedure is for Windows XP. For other
Windows OS, refer to the corresponding Windows User's
Guide or online help.
1. Click the Windows Start button.
2. Select Printers and Faxes.
3. Select your printer driver icon.
4. Right-click on the printer driver icon and select
Printing Preferences.
5. Change the settings on each tab, click OK.
14
Basic Printing
Layout Tab
The Layout tab provides options to adjust how the document appears on the printed page. The Layout Options includes
Multiple Pages per Side, Poster Printing and Booklet
Printing. See “Printing a Document” on page 13 for more
information on accessing printer properties.
Paper Tab
Use the following options to set the basic paper handling specifications when you access the printer properties. See
“Printing a Document” on page 13 for more information on
accessing printer properties.
Click the Paper tab to access various paper properties.
Paper Orientation
Paper Orientation allows you to select the direction in which information is printed on a page.
• Portrait prints across the width of the page, letter style.
• Landscape prints across the length of the page, spreadsheet style.
• Rotate 180 Degrees allows you to rotate the page, 180 degrees.
Portrait
Landscape
Layout Options
Layout Options allows you to select advanced printing options.
You can choose Multiple Pages per Side and Poster Printing.
• For details, see “Printing Multiple Pages on One Sheet of Paper
• For details, see “Printing Posters” on page 20
• For details, see “Printing Booklets” on page 20
Double-sided Printing
Double-sided Printing allows you to print on both sides of paper.
If this option does not appear, your printer does not have this feature.
• For details, see “Printing on Both Sides of Paper” on page 21.
15
Basic Printing
Copies
Copies allows you to choose the number of copies to be printed.
You can select 1 to 999 copies.
Paper Options
Size
Size allows you to set the size of paper you loaded in the tray.
If the required size is not listed in the Size box, click Custom.
When the Custom Paper Setting window appears, set the paper size and click OK. The setting appears in the list so that you can select it.
Source
Make sure that Source is set to the corresponding paper tray.
Use Manual Feeder when printing on special materials like envelopes and transparencies.
Type
Set Type to correspond to the paper loaded in the tray from which you want to print. This will let you get the best quality printout. If not, print quality may not be acheived as you want.
Thick Paper: 24 lb to 28 lb (90~105 g/m
2
) thick paper.
Thin Paper: 16 lb to 19 lb (60~70 g/m
2
) thin paper.
Cotton: 20 lb to 24 lb (75~90 g/m
2
25 % and Gilbert 100 %.
) cotton paper such as Gilbert
Plain Paper: Normal plain paper. Select this type if your printer is monochrome and printing on the 16 lb (60 g/m
2
) cotton paper.
Recycled Paper: 20 lb to 24 lb (75~90 g/m
2
) recycled paper.
Color Paper: 20 lb to 24 lb (75~90 g/m paper.
2
) color-backgrounded
Archive Paper: If you need to keep print-out for a long period time such as archives, select this option.
Glossy Photo 160 g/m2 (Glossy Photo 44 lb): 44 lb (160 g/ m2) glossy paper.
Scaling Printing
Scaling Printing allows you to automatically or manually scale your print job on a page. You can choose from None, Reduce/
Enlarge, and Fit to Page.
• For details, see “Printing a Reduced or Enlarged Document” on page 21.
• For details, see “Fitting Your Document to a Selected Paper
Graphics Tab
Use the following Graphic options to adjust the print quality for
Click the Graphic tab to display the properties shown below.
Quality
The Quality options you can select may vary depending on your printer model.
The higher the setting, the sharper the clarity of printed characters and graphics. The higher setting also may increase the time it takes to print a document.
Color Mode
You can choose color options. Setting to Color typically produces the best possible print quality for color documents. If you want to print a color document in grayscale, select Grayscale. If you want to adjust the color options manually, select Manual and click the Color Adjust or Color Matching button.
• Copies Setting: In order to use this option, first you need to set total number of copies from Paper tab. When you make several copies, and if you want to print some copies in color and some in grayscale, use this option and select the number of copies in grayscale.
• Color Adjust: You can adjust the appearance of images by changing the settings in the Levels option.
• Color Matching: You can adjust the appearance of images by changing the settings in the Settings option.
16
Basic Printing
Advanced Options
You can set advanced settings by clicking the Advanced
Options button.
• Print All Text To Black: When the Print All Text To
Black option is checked, all text in your document prints solid black, regardless of the color it appears on the screen.
• Print All Text To Darken: When the Print All Text To
Darken option is checked, all text in your document is allowed to print darker than on a normal document.
Some printers do not support this feature.
• Grayscale Enhancement: Press the Smart Color tab. It allows users to preserve the details of nature photos, and improve contrast and readability among gray scaled colors, when printing color documents in grayscale.
• Fine Edge: Press the Smart Color tab. It allows users to emphasize edges of texts and fine lines for improving readability and align each color channel registration in color printing mode.
Extras Tab
the printer properties.
Click the Extras tab to access the following feature:
Watermark
You can create a background text image to be printed on each
page of your document. For details, see “Using Watermarks” on page 22.
Overlay
Overlays are often used to take the place of preprinted forms and
letterhead paper. For details, see “Using Overlays” on page 23.
Output Options
• Print Subset: You can set the sequence in which the pages print. Select the print order from the drop-down list.
- Normal (1,2,3): Your printer prints all pages from the first page to the last page.
- Reverse All Pages (3,2,1): Your printer prints all pages from the last page to the first page.
- Print Odd Pages: Your printer prints only the odd numbered pages of the document.
- Print Even Pages: Your printer prints only the even numbered pages of the document.
17
Basic Printing
About Tab
Use the About tab to display the copyright notice and the version number of the driver. If you have an Internet browser, you can connect to the Internet by clicking on the web site icon.
See “Printing a Document” on page 13 for more information
about accessing printer properties.
Printer Tab
If you access printer properties through the Printers folder, you can view the Printer tab. You can set the printer configuration.
The following procedure is for Windows XP. For other Windows
OS, refer to the corresponding Windows User's Guide or online help.
1
Click the Windows Start menu.
2
Select Printers and Faxes.
3
Select your printer driver icon.
4
Right-click on the printer driver icon and select
Properties.
5
Click the Printer tab and set the options.
Using a Favorite Setting
The Favorites option, which is visible on each properties tab, allows you to save the current properties settings for future use.
To save a Favorites item:
1
Change the settings as needed on each tab.
2
Enter a name for the item in the Favorites input box.
3
Click Save.
When you save Favorites, all current driver settings are saved.
To use a saved setting, select the item from the Favorites drop down list. The printer is now set to print according to the
Favorites setting you selected.
To delete a Favorites item, select it from the list and click
Delete.
You can also restore the printer driver’s default settings by selecting Printer Default from the list.
Using Help
Your printer has a help screen that can be activated by clicking the Help button in the printer properties window. These help screens give detailed information about the printer features provided by the printer driver.
You can also click from the upper right corner of the window, and then click on any setting.
18
Basic Printing
3
Advanced Printing
This chapter explains printing options and advanced printing tasks.
N
OTE
:
• Your printer driver Properties window that appears in this
User’s Guide may differ depending on the printer in use.
However the composition of the printer properties window is similar.
• If you need to know the exact name of your printer, you can check the supplied CD-ROM.
This chapter includes:
• Printing Multiple Pages on One Sheet of Paper (N-Up
• Printing on Both Sides of Paper
• Printing a Reduced or Enlarged Document
• Fitting Your Document to a Selected Paper Size
1 2
3 4
Printing Multiple Pages on One
Sheet of Paper (N-Up Printing)
You can select the number of pages to print on a single sheet of paper. To print more than one page per sheet, the pages will be reduced in size and arranged in the order you specify. You can print up to 16 pages on one sheet.
1
To change the print settings from your software
application, access printer properties. See “Printing a
2
From the Layout tab, choose Multiple Pages per Side in the Layout Type drop-down list.
3
Select the number of pages you want to print per sheet
(1, 2, 4, 6, 9, or 16) in the Pages per Side drop-down list.
4
Select the page order from the Page Order drop-down list, if necessary.
Check Print Page Border to print a border around each page on the sheet.
5
Click the Paper tab, select the paper source, size, and type.
6
Click OK and print the document.
19
Advanced Printing
Printing Posters
This feature allows you to print a single-page document onto 4,
9, or 16 sheets of paper, for the purpose of pasting the sheets together to form one poster-size document.
N
OTE
: The poster printing option is available when 600 dpi is selected in the resolution option on the Graphic tab.
1
To change the print settings from your software
application, access printer properties. See “Printing a
2
Click the Layout tab, select Poster Printing in the
Layout Type drop-down list.
3
Configure the poster option:
You can select the page layout from Poster<2x2>,
Poster<3x3>, Poster<4x4> or Custom. If you select
Poster<2x2>, the output will be automatically stretched to cover 4 physical pages. If the option is set to Custom, you can enlarge the original from 150% to 400%.
Depending on the level of the enlargement, the page layout is automatically adjusted to Poster<2x2>,
Poster<3x3>, Poster<4x4>.
Printing Booklets
9
8
9
8
This printer feature allows you to print your document on both sides of the paper and arranges the pages so that the paper can be folded in half after printing to produce a booklet.
1
To change the print settings from your software
application, access the printer properties. See “Printing a
2
From the Layout tab, choose Booklet Printing from the
Layout Type drop-down list.
N
OTE
: The Booklet Printing option is not available for all paper sizes. In order to find out the available paper size for this feature, select the paper size in the Size option on the
Paper tab, then check if the Booklet Printing in a Layout
Type drop-down list on the Layout tab is activated.
3
Click the Paper tab, and select the paper source, size, and type.
4
Click OK and print the document.
5
After printing, fold and staple the pages.
Specify an overlap in millimeters or inches to make it easier to pasting the sheets together.
0.15 inches
0.15 inches
4
Click the Paper tab, select the paper source, size, and type.
5
Click OK and print the document. You can complete the poster by pasting the sheets together.
20
Advanced Printing
Printing on Both Sides of Paper
You can print on both sides of a sheet of paper. Before printing, decide how you want your document oriented.
The options are:
•
None
•
Long Edge
, which is the conventional layout used in book binding.
•
Short Edge
, which is the type often used with calendars.
2
2
2
3
5
â–˛ Long Edge
5
3
3
5 2
5
3
â–˛
Short Edge
N
OTE
:
• Do not print on both sides of labels, transparencies, envelopes, or thick paper. Paper jamming and damage to the printer may result.
1
To change the print settings from your software
application, access printer properties. “Printing a
2
From the Layout tab, select the paper orientation.
3
From the Double-sided Printing section, select the binding option you want.
4
Click the Paper tab and select the paper source, size, and type.
5
Click OK and print the document.
N
OTE
: If your printer does not have a duplex unit, you should complete the printing job manually. The printer prints every other page of the document first. After printing the first side of your job, the Printing Tip window appears. Follow the onscreen instructions to complete the printing job.
A
Printing a Reduced or Enlarged
Document
You can change the size of a page’s content to appear larger or smaller on the printed page.
1
To change the print settings from your software
application, access printer properties. See “Printing a
2
From the Paper tab, select Reduce/Enlarge in the
Printing Type drop-down list.
3
Enter the scaling rate in the Percentage input box.
You can also click the or button.
4
Select the paper source, size, and type in Paper Options.
5
Click OK and print the document.
Fitting Your Document to a
Selected Paper Size
This printer feature allows you to scale your print job to any selected paper size regardless of the digital document size. This can be useful when you want to check fine details on a small document.
1
To change the print settings from your software
application, access printer properties. See “Printing a
2
From the Paper tab, select Fit to Page in the Printing
Type drop-down list.
3
Select the correct size from the Output size drop-down list.
4
Select the paper source, size, and type in Paper Options.
5
Click OK and print the document.
21
Advanced Printing
Using Watermarks
The Watermark option allows you to print text over an existing document. For example, you may want to have large gray letters reading “DRAFT” or “CONFIDENTIAL” printed diagonally across the first page or all pages of a document.
There are several predefined watermarks that come with the printer, and they can be modified, or you can add new ones to the list.
Using an Existing Watermark
1
To change the print settings from your software
application, access printer properties. See “Printing a
2
Click the Extras tab, and select the desired watermark from the Watermark drop-down list. You will see the selected watermark in the preview image.
3
Click OK and start printing.
N
OTE
: The preview image shows how the page will look when it is printed.
Creating a Watermark
1
To change the print settings from your software
application, access printer properties. See “Printing a
2
Click the Extras tab, and click the Edit button in the
Watermark section. The Edit Watermark window appears.
3
Enter a text message in the Watermark Message box.
You can enter up to 40 characters. The message displays in the preview window.
When the First Page Only box is checked, the watermark prints on the first page only.
4
Select watermark options.
You can select the font name, style, size, or grayscale level from the Font Attributes section and set the angle of the watermark from the Message Angle section.
5
Click Add to add a new watermark to the list.
6
When you have finished editing, click OK and start printing.
To stop printing the watermark, select (No Watermark) from the Watermark drop-down list.
Editing a Watermark
1
To change the print settings from your software
application, access printer properties. See “Printing a
2
Click the Extras tab and click the Edit button in the
Watermark section. The Edit Watermark window appears.
3
Select the watermark you want to edit from the Current
Watermarks list and change the watermark message and options.
4
Click Update to save the changes.
5
Click OK until you exit the Print window.
Deleting a Watermark
1
To change the print settings from your software
application, access printer properties. See “Printing a
2
From the Extras tab, click the Edit button in the
Watermark section. The Edit Watermark window appears.
3
Select the watermark you want to delete from the Current
Watermarks list and click Delete.
4
Click OK until you exit the Print window.
22
Advanced Printing
Dear ABC
Regards
WORLD BEST
WORLD BEST
Using Overlays
What is an Overlay?
An overlay is text and/or images stored in the computer hard disk drive (HDD) as a special file format that can be printed on any document. Overlays are often used to take the place of preprinted forms and letterhead paper. Rather than using preprinted letterhead, you can create an overlay containing the exact same information that is currently on your letterhead. To print a letter with your company’s letterhead, you do not need to load preprinted letterhead paper in the printer. You need only tell the printer to print the letterhead overlay on your document.
Creating a New Page Overlay
To use a page overlay, you must create a new page overlay containing your logo or image.
1
Create or open a document containing text or an image for use in a new page overlay. Position the items exactly as you wish them to appear when printed as an overlay.
2
To save the document as an overlay, access printer
properties. See “Printing a Document” on page 13.
3
Click the Extras tab, and click Edit button in the Overlay section.
4
In the Edit Overlay window, click Create Overlay.
5
In the Create Overlay window, type a name of up to eight characters in the File name box. Select the destination path, if necessary. (The default is C:\Formover).
6
Click Save. The name appears on the Overlay List box.
7
Click OK or Yes to finish creating.
The file is not printed. Instead it is stored on your computer hard disk drive.
N
OTE
: The overlay document size must be the same as the documents you print with the overlay. Do not create an overlay with a watermark.
Using a Page Overlay
After an overlay has been created, it is ready to be printed with your document. To print an overlay with a document:
1
Create or open the document you want to print.
2
To change the print settings from your software
application, access printer properties. See “Printing a
3
Click the Extras tab.
4
Select the desired overlay from the Overlay drop-down list box.
5
If the overlay file you want does not appear in the
Overlay list, click Edit button and Load Overlay, and select the overlay file.
If you have stored the overlay file you want to use in an external source, you can also load the file when you access the Load Overlay window.
After you select the file, click Open. The file appears in the
Overlay List box and is available for printing. Select the overlay from the Overlay List box.
6
If necessary, click Confirm Page Overlay When
Printing. If this box is checked, a message window appears each time you submit a document for printing, asking you to confirm your wish to print an overlay on your document.
If this box is not checked and an overlay has been selected, the overlay automatically prints with your document.
7
Click OK or Yes until printing begins.
The selected overlay downloads with your print job and prints on your document.
N
OTE
: The resolution of the overlay document must be the same as that of the document you will print with the overlay.
Deleting a Page Overlay
You can delete page overlays that you no longer use.
1
In the printer properties window, click the Extras tab.
2
Click the Edit button in the Overlay section.
3
Select the overlay you want to delete from the Overlay
List box.
4
Click Delete Overlay.
5
When a confirming message window appears, click Yes.
6
Click OK until you exit the Print window.
23
Advanced Printing
4
Sharing the Printer
Locally
You can connect the printer directly to a selected computer, which is called “host computer,” on the network.
The following procedure is for Windows XP. For other Windows
OS, refer to the corresponding Windows User's Guide or online help.
N
OTES
:
• Check the Operating System(s) that are compatible with your printer. Please refer to the OS Compatibility section of
Printer Specifications in your Printer User’s Guide.
• If you need to know the exact name of your printer, you can check the supplied CD-ROM.
Setting Up a Host Computer
1
Start Windows.
2
From the Start menu select Printers and Faxes.
3
Double-click your printer driver icon.
4
From the Printer menu, select Sharing.
5
Check the Share this printer box.
6
Fill in the Shared Name field, and then click OK.
Setting Up a Client Computer
1
Right-click the Windows Start button and select Explore.
2
Select My Network Places and then right-click Search
for Computers.
3
Fill in the IP address of host computer in Computer name field, and click Search. (In case host computer requires
User name and Password, fill in User ID and password of host computer account.)
4
Double-click Printers and Faxes.
5
Right-click printer driver icon, select Connect.
6
Click Yes, if the installation confirm message appears.
24
Sharing the Printer Locally
5
Using Smart Panel
Smart Panel is a program that monitors and informs you of the status of the printer, and allows you to customize the printer’s settings. Smart Panel is installed automatically when you install the printer software.
N
OTES
:
• To use this program, you need:
- To check for Operating System(s) that are compatible with your printer, refer to Printer Specifications in your Printer
User’s Guide.
- Mac OS X 10.3 or higher
- Linux. To check for Linux systems that are compatible with your printer, refer to Printer Specifications in your Printer
User’s Guide.
- Internet Explorer version 5.0 or higher for flash animation in HTML Help.
• If you need to know the exact name of your printer, you can check the supplied CD-ROM.
Understanding Smart Panel
If an error occurs while printing, Smart Panel appears automatically, showing the error.
You can also launch Smart Panel manually. Double-click the
Smart Panel icon on the Windows task bar (in Windows), or
Notification Area (in Linux). You can also click it on the status bar (in Mac OS X).
Double-click this icon in Windows.
Click this icon in Mac OS X.
Click this icon in Linux.
25
Using Smart Panel
If you are a Windows user, from the Start menu, select
Programs or All Programs
→
your printer driver name
→
Smart Panel.
N
OTES
:
• If you have already installed more than one Samsung printer, first select the printer model you want in order to use the corresponding Smart Panel. Right-click (in Windows or Linux) or click (in Mac OS X) the Smart Panel icon and select your printer name.
• The Smart Panel window and its contents shown in this
Software User’s Guide may differ depending on the printer or
Operating System in use.
The Smart Panel program displays the current status of the printer, the level of toner remaining in the toner cartridge(s) and various other information. You can also change settings.
1
1
Toner Level
You can view the level of toner remaining in the toner cartridge(s). The printer and the number of toner cartridge(s) shown in the above window may differ depending on the printer in use. Any printers do not have this feature.
Buy Now
You can order replacement toner cartridge(s) online.
Troubleshooting Guide
You can view Help to solve problems.
Printer Setting
You can configure various printer settings in the Printer Settings
Utility window. Any printers do not have this feature.
N
OTE
:
If your printer is connected to a network and you are a
Windows and Mac OS X user, the SyncThru Web Service window appears instead of the Printer Settings Utility window.
Linux does not support network environments.
Driver Setting (Only for Windows)
You can use the printer properties window, which allows you to access all of the printer options you need for using your
printer. For details, See “Printer Settings” on page 14.
Opening the Troubleshooting
Guide
Using the troubleshooting guide, you can view solutions for error status problems.
Right-click (in Windows or Linux) or click (in Mac OS X) the
Smart Panel icon and select Troubleshooting Guide.
Using Printer Settings Utility
Using the Printer Settings Utility, you can configure and check print settings.
1
Right-click (in Windows or Linux) or click (in Mac OS X) the
Smart Panel icon and select Printer Setting.
2
Change the settings.
3
To send the changes to the printer, click the Apply button.
N
OTES
:
If your printer is connected to a network, the
SyncThru Web Service window appears instead of the
Printer Settings Utility window.
Using Onscreen Help File
For more information about Printer Settings Utility, click .
Changing the Smart Panel
Program Settings
Right-click (in Windows or Linux) or click (in Mac OS X) the
Smart Panel icon and select Options. Select the settings you want from the Options window.
26
Using Smart Panel
6
Using Your Printer in
Linux
You can use your machine in a Linux environment.
This chapter includes:
• Installing the Unified Linux Driver
• Using the Unified Driver Configurator
• Configuring Printer Properties
Getting Started
The supplied CD-ROM provides you with Samsung’s Unified
Linux Driver package for using your machine with a Linux computer.
After the driver is installed on your Linux system, the driver package allows you to monitor a number of machine devices via fast ECP parallel ports and USB simultaneously.
The Unified Linux Driver package is supplied with a smart and flexible installation program. You don't need to search for additional components that might be necessary for the Unified
Linux Driver software: all required packages will be carried onto your system and installed automatically; this is possible on a wide set of the most popular Linux clones.
Installing the Unified Linux
Driver
Installing the Unified Linux Driver
1
Make sure that you connect your machine to your computer. Turn both the computer and the machine on.
2
When the Administrator Login window appears, type in
root
in the Login field and enter the system password.
N
OTE
: You must log in as a super user (root) to install the printer software. If you are not a super user, ask your system administrator.
3
Insert the printer software CD-ROM. The CD-ROM will automatically run.
If the CD-ROM does not automatically run, click the icon at the bottom of the desktop. When the Terminal screen appears, type in:
If the CD-ROM is secondary master and the location to mount is /mnt/cdrom,
[root@localhost root]#mount -t iso9660 /dev/hdc /mnt/ cdrom
[root@localhost root]#cd /mnt/cdrom/Linux
[root@localhost root]#./install.sh
If you still failed to run the CD-ROM, type teh followings in sequence:
[root@localhost root]#umount /dev/hdc
[root@localhost root]#mount -t iso9660 /dev/hdc /mnt/ cdrom
N
OTE
: The installation program runs automatically if you have an autorun software package installed and configured.
27
Using Your Printer in Linux
4
When the welcome screen appears, click Next.
5
When the installation is complete, click Finish.
Uninstalling the Unified Linux Driver
1
When the Administrator Login window appears, type in
root
in the Login field and enter the system password.
N
OTE
: You must log in as a super user (root) to uninstall the printer software. If you are not a super user, ask your system administrator.
2
Insert the printer software CD-ROM. The CD-ROM will automatically run.
If the CD-ROM does not automatically run, click the icon at the bottom of the desktop. When the Terminal screen appears, type in:
If the CD-ROM is secondary master and the location to mount is /mnt/cdrom,
[root@localhost root]#mount -t iso9660 /dev/hdc /mnt/ cdrom
[root@localhost root]#cd /mnt/cdrom/Linux
[root@localhost root]#./uninstall.sh
N
OTE
: The installation program runs automatically if you have an autorun software package installed and configured.
3
Click Uninstall.
4
Click Next.
The installation program has added the Unified Driver
Configurator desktop icon and Samsung Unified Driver group to the system menu for your convenience. If you have any difficulties, consult the onscreen help that is available through your system menu or can otherwise be called from the driver package windows applications, such as Unified Driver Configurator.
N
OTE
: Installing the driver in the text mode:
• If you do not use the graphical interface or have failed the driver installation, you have to use the driver in the text mode.
• Follow the step 1 to 3, then type [root@localhost Linux]# ./ install.sh, then follow the instruction on the terminal screen.
Then the installation completes.
• When you wan to uninstall the driver, follow the installation instruction above, but type [root@localhost Linux]# ./ uninstall.sh on the terminal screen.
5
Click Finish.
28
Using Your Printer in Linux
Using SetIP program
This program is for the network IP setting using the MAC address which is the hardware serial number of the network printer card or interface. Especially, it is for the network administrator to set several network IPs at the same time.
You can only use SetIP program when your machine is connected to a network.
SetIP program should be automatically installed during the printer driver installation.
Starting the program
1
Print the machine’s network information report which includes your machine’s MAC address.
2
Open the /opt/Samsung/mfp/share/utils/.
3
Double click the SetIPApplet.html file.
4
Click in the SetIP window to open the TCP/IP configuration window.
5
Enter the network card's MAC address, IP address, subnet mask, default gateway, and then click Apply.
N
OTE
: when you enter the MAC address, enter it without colon(:).
6
The machine prints the network information. Confirm all the settings are correct.
7
Close the SetIP program.
Using the Unified Driver
Configurator
Unified Linux Driver Configurator is a tool primarily intended for configuring Printer.
After installing the Unified Linux driver, the Unified Linux Driver
Configurator icon will automatically be created on your desktop.
Opening the Unified Driver
Configurator
1
Double-click Unified Driver Configurator on the desktop.
You can also click the Startup Menu icon and select
Samsung Unified Driver and then Unified Driver
Configurator.
2
Press each button on the Modules pane to switch to the corresponding configuration window.
Printers Configuration button
Ports Configuration button
You can use the onscreen help by clicking Help.
3
After changing the configurations, click Exit to close the
Unified Driver Configurator.
29
Using Your Printer in Linux
Printers Configuration
Printers configuration has the two tabs: Printers and Classes.
Printers Tab
You can see the current system’s printer configuration by clicking on the printer icon button on the left side of the Unified
Driver Configurator window.
Switches to Printer configuration.
Shows all of the installed printer.
Shows the status, model name and
URI of your printer.
You can use the following printer control buttons:
• Refresh: renews the available printers list.
• Add Printer: allows you to add a new printer.
• Remove Printer: removes the selected printer.
• Set as Default: sets the current printer as a default printer.
• Stop/Start: stops/starts the printer.
• Test: allows you to print a test page to check if the machine is working properly.
• Properties: allows you to view and change the printer
properties. For details, see page 31.
Classes Tab
The Classes tab shows a list of available printer classes.
Shows all of the printer classes.
Shows the status of the class and the number of printers in the class.
• Refresh : Renews the classes list.
• Add Class... : Allows you to add a new printer class.
• Remove Class : Removes the selected printer class.
Ports Configuration
In this window, you can view the list of available ports, check the status of each port and release a port that is stalled in busy state when its owner is terminated for any reason.
Switches to ports configuration.
Shows the port type, device connected to the port and status
Shows all of the available ports.
• Refresh : Renews the available ports list.
• Release port : Releases the selected port.
30
Using Your Printer in Linux
Configuring Printer Properties
Using the properties window provided by the Printers configuration, you can change the various properties for your machine as a printer.
1
Open the Unified Driver Configurator.
If necessary, switch to Printers configuration.
2
Select your machine on the available printers list and click
Properties.
3
The Printer Properties window opens.
Printing a Document
Printing from Applications
There are a lot of Linux applications that you are allowed to print from using Common UNIX Printing System (CUPS). You can print on your machine from any such application.
1
From the application you are using, select Print from the
File menu.
2
Select Print directly using lpr.
3
In the LPR GUI window, select the model name of your machine from the Printer list and click Properties.
Click.
The following five tabs display at the top of the window:
•General: allows you to change the printer location and name. The name entered in this tab displays on the printer list in Printers configuration.
•Connection: allows you to view or select another port. If you change the printer port from USB to parallel or vice versa while in use, you must re-configure the printer port in this tab.
•Driver: allows you to view or select another printer driver. By clicking Options, you can set the default device options.
•Jobs: shows the list of print jobs. Click Cancel job to cancel the selected job and select the Show completed
jobs check box to see previous jobs on the job list.
•Classes: shows the class that your printer is in. Click
Add to Class to add your printer to a specific class or click Remove from Class to remove the printer from the selected class.
4
Click OK to apply the changes and close the Printer
Properties Window.
4
Change the printer and print job properties.
31
Using Your Printer in Linux
The following four tabs display at the top of the window.
•General - allows you to change the paper size, the paper type, and the orientation of the documents, enables the duplex feature, adds start and end banners, and changes the number of pages per sheet.
•Text - allows you to specify the page margins and set the text options, such as spacing or columns.
•Graphics - allows you to set image options that are used when printing images/files, such as color options, image size, or image position.
•Device: allows you to set the print resolution, paper source, and destination.
5
Click Apply to apply the changes and close the Properties window.
6
Click OK in the LPR GUI window to start printing.
7
The Printing window appears, allowing you to monitor the status of your print job.
To abort the current job, click Cancel.
Printing Files
You can print many different types of files on the Samsung machine device using the standard CUPS way - directly from the command line interface. The CUPS lpr utility allows you do that. But the drivers package replaces the standard lpr tool by a much more user-friendly LPR GUI program.
To print any document file:
1
Type
lpr <file_name>
from the Linux shell command line and press Enter. The LPR GUI window appears.
When you type only
lpr
and press Enter, the Select file(s) to print window appears first. Just select any files you want to print and click Open.
2
In the LPR GUI window, select your printer from the list, and change the printer and print job properties.
For details about the properties window, see page 31.
3
Click OK to start printing.
32
Using Your Printer in Linux
7
Using Your Printer with a Macintosh
Your printer supports Macintosh systems with a built-in USB interface or 10/100 Base-TX network interface card. When you print a file from a Macintosh computer, you can use the CUPS driver by installing the PPD file.
N
OTE
:
Some printers do not support a network interface. Make sure that your printer supports a network interface by referring to Printer Specifications in your Printer User’s Guide.
This chapter includes:
Installing Software
The CD-ROM that came with your printer provides you with the
PPD file that allows you to use the CUPS driver or Apple
LaserWriter driver
(only available when you use a printer which supports the PostScript driver)
, for printing on a
Macintosh computer.
Printer driver
Installing the Printer driver
1
Make sure that you connect your printer to the computer.
Turn on your computer and printer.
2
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
3
Double-click CD-ROM icon that appears on your
Macintosh desktop.
4
Double-click the MAC_Installer folder.
5
Double-click the MAC_Printer folder.
6
Double-click the Samsung SPLC Installer icon.
7
Enter the password and click OK.
8
The Samsung SPL Installer window opens. Click Continue and then click Continue.
9
Select Easy Install and click Install.
10
After the installation is finished, click Quit.
Uninstalling the Printer driver
Uninstall is required if you are upgrading the software, or if installation fails.
1
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
2
Double-click CD-ROM icon that appears on your
Macintosh desktop.
3
Double-click the MAC_Installer folder.
4
Double-click the MAC_Printer folder.
5
Double-click the Samsung SPLC Installer icon.
6
Enter the password and click OK.
7
The Samsung SPL Installer window opens. Click Continue and then click Continue.
8
Select Uninstall and then click Uninstall.
9
When the uninstallation is done, click Quit.
33
Using Your Printer with a Macintosh
Using SetIP program
This program is for the network IP setting using the MAC address which is the hardware serial number of the network printer card or interface. Especially, it is for the network administrator to set several network IPs at the same time.
You can only use SetIP program when your machine is connected to a network.
SetIP program should be automatically installed during the printer driver installation.
N
OTE
: If you select Typical installation for a network
printer during the printer driver installation, the SetIP program automatically runs after the installation. Follow the below instruction.
1
The certificate window appears, click Trust.
2
Print the machine’s network information report which includes your machine’s MAC address.
3
Click in the SetIP window to open the TCP/IP configuration window.
4
Enter the network card's MAC address, IP address, subnet mask, default gateway, and then click Apply.
N
OTE
: when you enter the MAC address, enter it without colon(:).
5
The machine prints the network information. Confirm all the settings are correct.
6
Close the SetIP program.
Starting the program
If you want to change your network printer IP setting, follow the below instruction.
1
Print the machine’s network information report which includes your machine’s MAC address.
2
Open the Library folder → Printers → Samsung → Your
printer model name → SetIP.
3
Double click the SetIPApplet.html file.
4
The certificate window appears, click Trust.
5
Click in the SetIP window to open the TCP/IP configuration window.
6
Enter the network card's MAC address, IP address, subnet mask, default gateway, and then click Apply. when you enter the MAC address, enter it without colon(:).
7
The machine prints the network information. Confirm all the settings are correct.
8
Close the SetIP program.
Setting Up the Printer
Set up for your printer will be different depending on which cable you use to connect the printer to your computer—the network cable or the USB cable.
For a Network-connected
N
OTE
:
Some printers do not support a network interface. Before connecting your printer, make sure that your printer supports a network interface by referring to Printer Specifications in your Printer User’s
Guide.
1
Follow the instructions on “Installing Software” on page 33
to install the PPD and Filter files on your computer.
2
Open the Applications folder → Utilities, and Print
Setup Utility.
•For MAC OS 10.5, open System Preferences from the
Applications folder, and click Printer & Fax.
3
Click Add on the Printer List.
•For MAC OS 10.5, press the “+” icon then a display window will pop up.
4
For MAC OS 10.3, select the IP Printing tab.
•For MAC OS 10.4, click IP Printer.
•For MAC OS 10.5, click IP.
5
Select Socket/HP Jet Direct in Printer Type.
WHEN PRINTING A DOCUMENT CONTAINING MANY
PAGES, PRINTING PERFORMANCE MAY BE
ENHANCED BY CHOOSING SOCKET FOR PRINTER
TYPE OPTION.
6
Enter the printer’s IP address in the Printer Address field.
7
Enter the queue name in the Queue Name field. If you cannot determine the queue name for your printer server, try using the default queue first.
8
For MAC OS 10.3, if Auto Select does not work properly, select Samsung in Printer Model and your printer
name in Model Name.
•For MAC OS 10.4, if Auto Select does not work properly, select Samsung in Print Using and your printer name in Model.
•For MAC OS 10.5, if Auto Select does not work properly, select Select a driver to use... and your printer name in Print Using.
Your printer’s IP address appears on the Printer List, and is set as the default printer.
9
Click Add.
34
Using Your Printer with a Macintosh
For a USB-connected
1
Follow the instructions on “Installing Software” on page 33
to install the PPD and Filter files on your computer.
2
Open the Applications folder → Utilities, and Print
Setup Utility.
•For MAC OS 10.5, open System Preferences from the
Applications folder, and click Printer & Fax.
3
Click Add on the Printer List.
•For MAC OS 10.5, press the “+” icon then a display window will pop up.
4
For MAC OS 10.3, select the USB tab.
•For MAC OS 10.4, click Default Browser and find the
USB connection.
•For MAC OS 10.5, click Default and find the USB connection.
5
For MAC OS 10.3, if Auto Select does not work properly, select Samsung in Printer Model and your printer
name in Model Name.
•For MAC OS 10.4, if Auto Select does not work properly, select Samsung in Print Using and your printer name in Model.
•For MAC OS 10.5, if Auto Select does not work properly, select Select a driver to use... and your printer name in Print Using.
Your machine appears on the Printer List and is set as the default printer.
6
Click Add.
35
Using Your Printer with a Macintosh
Printing
N
OTES
:
• The Macintosh printer’s properties window that appears in this User’s Guide may differ depending on the printer in use.
However the composition of the printer properties window is similar.
• You can check your printer name in the supplied CD-
ROM.
Printing a Document
When you print with a Macintosh, you need to check the printer software setting in each application you use. Follow these steps to print from a Macintosh.
1
Open a Macintosh application and select the file you want to print.
2
Open the File menu and click Page Setup (Document
Setup in some applications).
3
Choose your paper size, orientation, scaling, and other options and click OK.
Make sure that your printer is selected.
Changing Printer Settings
You can use advanced printing features when using your printer.
From your Macintosh application, select Print from the File menu. The printer name which appears in the printer properties window may differ depending on the printer in use. Except for the name, the composition of the printer properties window is similar.
N
OTES
: The setting options may differ depending on printers and Macintosh OS version.
Layout
The Layout tab provides options to adjust how the document appears on the printed page. You can print multiple pages on one sheet of paper. Select Layout from the Presets drop-down list to access the following features.
â–˛ Mac OS 10.4
•Pages per Sheet: This feature determines how many pages printed on one page. For details, see "Printing
Multiple Pages on One Sheet of Paper" on the next column.
•Layout Direction: You can select the printing direction on a page as like the examples on UI.
â–˛ Mac OS 10.3
4
Open the File menu and click Print.
5
Choose the number of copies you want and indicate which pages you want to print.
6
Click Print when you finish setting the options.
36
Using Your Printer with a Macintosh
Graphics
The Graphics tab provides options for selecting
Resolution(Quality)
and Color Mode. Select Graphics form the Presets' drop-down list to access the graphic features.
Printer Features
This tab provides options for selecting the paper type and adjusting print quality. Select Printer Features from the
Presets' drop-down list to access the following features:
â–˛ Mac OS 10.4
•
Resolution(Quality)
: You can select the printing resolution. The higher the setting, the sharper the clarity of printed characters and graphics. The higher setting also may increase the time it takes to print a document.
•Color Mode: You can set the color options. Setting to
Color typically produces the best possible print quality for color documents. If you want to print a color document in grayscale, select Grayscale.
Paper
Set Paper Type to correspond to the paper loaded in the tray from which you want to print. This will let you get the best quality printout. If you load a different type of print material, select the corresponding paper type.
â–˛ Mac OS 10.4
•
Fit to Page
: This setting allows you to scale your print job to any selected paper size regardless of the digital document size. This can be useful when you want to check fine details on a small document.
•RGB Color: This setting determines how colors are rendered. Standard is the most widely used setting which the color tone of this mode is the closest to that of standard monitor (sRGB Monitor). Vivid mode is appropriate for printing presentation data and charts.
The color tone of Vivid mode produces more Vivid color images than that of Standard mode. Device mode is best used for printing fine lines, small characters and color drawings. The color tone of Device mode may be different from that of monitor, the pure toner colors are used for printing Cyan, Magenta and Yellow colors.
â–˛ Mac OS 10.4
37
Using Your Printer with a Macintosh
Printing Multiple Pages on One Sheet of Paper
You can print more than one page on a single sheet of paper.
This feature provides a cost-effective way to print draft pages.
1
From your Macintosh application, select Print from the
File menu.
2
Select Layout.
â–˛ Mac OS 10.3
3
Select the number of pages you want to print on one sheet of paper on the Pages per Sheet drop-down list.
4
Select the page order from the Layout Direction option.
To print a border around each page on the sheet, select the option you want from the Border drop-down list.
5
Click Print, and the printer prints the selected number of pages on one side of each page.
38
Using Your Printer with a Macintosh
S
OFTWARE SECTION
I
NDEX
A
advanced printing, use
B
booklet printing
D
document, print
Macintosh
Windows
double-sided printing
E
Extras properties, set
F
favorites settings, use
G
Graphics properties, set
H
help, use
I
install printer driver
Macintosh
Windows
installing
Linux software
L
language, change
Layout properties, set
Windows
Linux driver, install
printer properties
printing
M
Macintosh driver install
uninstall
printing
setting up the printer
MFP driver, install
Linux
N
n-up printing
Macintosh
Windows
O
orientation, print
Windows
overlay create
delete
P
Paper properties, set
paper size, set
paper source, set
Windows
paper type, set print
poster, print
print document
39 fit to page
from Macintosh
from Windows
N-up
Macintosh
Windows
overlay
poster
PRN
scaling
watermark
print resolution
printer driver, install
Linux
printer properties
Linux
printer properties, set
Macintosh
Windows
printer resolution, set
Windows
printer software install
Macintosh
Windows
uninstall
Macintosh
Windows
printing booklets
double-sided
from Linux
R
resolution printing
S
setting darkness
favorites
image mode
resolution
Windows
toner save
true-type option
software install
Macintosh
Windows
reinstall
Windows
system requirements
Macintosh
uninstall
Macintosh
Windows
status monitor, use
T
toner save, set
U
uninstall, software
Macintosh
Windows
uninstalling
MFP driver
Linux
W
watermark create
delete
edit
40
REV 1.02
Advertisement
Key features
- Full color printing
- Print resolution up to 2400 x 600 dpi
- Print speeds up to 17 ppm
- Supports various media types
- Network and USB connectivity
- Wireless connectivity(CLP-310W, CLP-315W only)
- Save modes for energy conservation