CR25RM-12D Datasheet

CR25RM-12D Datasheet
To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
3.
4.
5.
6.
7.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
8.
9.
10.
11.
12.
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
CR25RM-12D
Thyristor
Medium Power Use
REJ03G1716-0100
Rev.1.00
Jul 08, 2008
Features
•
•
•
•
• Insulated Type
• Planar Passivation Type
• The product guaranteed maximum junction
temperature of 150°C
IT (AV) : 25 A
VDRM : 600 V
IGT : 30 mA
Viso : 2000 V
Outline
RENESAS Package code: PRSS0003ZA-A
(Package name: TO-3PFM)
2
1. Cathode
2. Anode
3. Gate
3
1
1
2
3
Applications
Switching mode power supply, motor control, heater control, and other general purpose control applications
Maximum Ratings
Parameter
Repetitive peak reverse voltage
Non-repetitive peak reverse voltage
DC reverse voltage
Repetitive peak off-state voltage
DC off-state voltage
REJ03G1716-0100
Page 1 of 6
Rev.1.00
Jul 08, 2008
Symbol
Voltage class
12
Unit
VRRM
VRSM
VR (DC)
VDRM
VD (DC)
600
720
480
600
480
V
V
V
V
V
CR25RM-12D
Parameter
RMS on-state current
Average on-state current
Symbol
IT (RMS)
IT (AV)
Ratings
39.3
25
Unit
A
A
ITSM
360
A
I2 t
648
A2s
PGM
PG (AV)
VFGM
VRGM
IFGM
Tj
Tstg
—
5
0.5
6
10
2
– 40 to +150
– 40 to +150
5.2
W
W
V
V
A
°C
°C
g
Viso
2000
V
Surge on-state current
I2t for fusing
Peak gate power dissipation
Average gate power dissipation
Peak gate forward voltage
Peak gate reverse voltage
Peak gate forward current
Junction temperature
Storage temperature
Mass
Isolation voltage
Conditions
Commercial frequency, sine half wave
180° conduction, Tc = 61°C
50 Hz sine half wave 1 full cycle,
peak value, non-repetitive
Value corresponding to 1 cycle of half
wave 50 Hz, surge on-state current
Typical value
Ta = 25°C, AC 1 minute,
each terminal to case
Electrical Characteristics
Parameter
Repetitive peak reverse current
Repetitive peak off-state
current
On-state voltage
Symbol
IRRM
IDRM
Min.
—
—
Typ.
—
—
Max.
2.0/5.0
2.0/5.0
Unit
mA
mA
VTM
—
—
1.6
V
Test conditions
Tj = 125°C/150°C, VRRM applied
Tj = 125°C/150°C, VDRM applied
Gate trigger voltage
VGT
—
—
1.5
V
Tc = 25°C, ITM = 40 A,
instantaneous value
Tj = 25°C, VD = 6 V, IT = 1 A
Gate non-trigger voltage
VGD
0.2/0.1
—
—
V
Tj = 125°C/150°C, VD = 1/2 VDRM
IGT
IH
Rth (j-c)
—
—
—
—
15
—
30
—
1.6
mA
mA
°C/W
Gate trigger current
Holding current
Thermal resistance
Notes: 1. The contact thermal resistance Rth (c-f) in case of greasing is 0.5°C/W.
REJ03G1716-0100
Page 2 of 6
Rev.1.00
Jul 08, 2008
Tj = 25°C, VD = 6 V, IT = 1 A
Tj = 25°C, VD = 12 V
Junction to caseNote1
CR25RM-12D
Performance Curves
103
7
5
3
2
Rated Surge On-State Current
400
Tc = 25°C
Surge On-State Current (A)
On-State Current (A)
Maximum On-State Characteristics
102
7
5
3
2
101
7
5
3
2
VFGM = 6 V
PG(AV) =
0.5 W
× 100 (%)
IFGM
=2A
IGT = 30 mA
102
103
104
Gate Trigger Current (Tj = t°C)
Gate Trigger Current (Tj = 25°C)
120
80
40
2 3 4 5 7 101
2 3 4 5 7 102
103
Typical Example
102
101
100
–40
0
40
80
120
160
Gate Current (mA)
Junction Temperature (°C)
Gate Trigger Voltage vs.
Junction Temperature
Maximum Transient Thermal Impedance
Characteristics (Junction to case)
103
Typical Example
102
101
0
40
80
120
Junction Temperature (°C)
Rev.1.00
Jul 08, 2008
160
Transient Thermal Impedance (°C/W)
Gate Voltage (V)
PGM = 5 W
VGD = 0.1 V
× 100 (%)
160
Gate Trigger Current vs.
Junction Temperature
10–2
101
Gate Trigger Voltage (Tj = t°C)
Gate Trigger Voltage (Tj = 25°C)
200
Gate Characteristics
10–1
REJ03G1716-0100
Page 3 of 6
240
Conduction Time (Cycles at 50Hz)
VGT = 1.5 V
100
–40
280
On-State Voltage (V)
102
100
320
0
100
100
0.6 1.0 1.4 1.8 2.2 2.6 3.0 3.4 3.8
101
360
102
101
100
10–1 –3
10
10–2
10–1
Time (s)
100
101
CR25RM-12D
Allowable Case Temperature vs.
Average On-State Current
(Single-Phase Half Wave)
80
160
70
140
Case Temperature (°C)
Average Power Dissipation (W)
Maximum Average Power Dissipation
(Single-Phase Half Wave)
180°
60
120°
90°
60°
50
40
θ = 30°
30
θ
20
360°
Resistive,
inductive loads
10
0
0
10
20
30
80
60
40
60° 120°
θ = 30° 90° 180°
10
20
30
50
40
Average On-State Current (A)
Average On-State Current (A)
Maximum Average Power Dissipation
(Single-Phase Full Wave)
Allowable Case Temperature vs.
Average On-State Current
(Single-Phase Full Wave)
160
70
60
Case Temperature (°C)
Average Power Dissipation (W)
360°
100
0
0
80
180°
120°
θ = 30°
50
90°
60°
40
30
20
θ
θ
360°
10
10
20
40
30
140
θ
120
360°
80
60
40
0
0
50
Average On-State Current (A)
70
140
DC
270°
180°
120°
50
40
Case Temperature (°C)
160
90°
θ = 30°
30
θ
20
360°
10
10
20
30
40
Average On-State Current (A)
REJ03G1716-0100
Page 4 of 6
Rev.1.00
Jul 08, 2008
Resistive,
inductive loads
50
θ
120
360°
100
80
60
40
20
Resistive,
inductive loads
0
0
50
Allowable Case Temperature vs.
Average On-State Current
(Rectangular Wave)
80
60°
120°
60°
180°
90°
θ = 30°
40
10
20
30
Average On-State Current (A)
Maximum Average Power Dissipation
(Rectangular Wave)
60
θ
Resistive loads
100
20
Resistive loads
0
0
Average Power Dissipation (W)
θ
120
20
50
40
Resistive,
inductive loads
0
0
60°
θ = 30°
10
180°
270°
90°
120°
DC
20
30
40
Average On-State Current (A)
50
102
101
–40
0
40
80
120
160
Breakover Voltage vs.
Rate of Rise of Off-State Voltage
160
Typical Example
Tj = 125°C
140
120
100
80
60
40
20
0
101 2 3 5 7 102 2 3 5 7 103 2 3 5 7 104
Repetitive Peak Reverse Voltage vs.
Junction Temperature
160
Typical Example
140
120
100
80
60
40
20
0
–40
0
40
80
120
160
Junction Temperature (°C)
Breakover Voltage vs.
Rate of Rise of Off-State Voltage
160
Typical Example
Tj = 150°C
140
120
100
80
60
40
20
0
101
102
103
104
Rate of Rise of Off-State Voltage (V/µs)
Rate of Rise of Off-State Voltage (V/µs)
Holding Current vs.
Junction Temperature
Gate Trigger Current vs.
Gate Current Pulse Width
103
Typical Example
102
101
–40
0
40
80
120
Junction Temperature (°C)
REJ03G1716-0100
Page 5 of 6
Rev.1.00
Jul 08, 2008
160
× 100 (%)
Holding Current (Tj = t°C)
Holding Current (Tj = 25°C)
× 100 (%)
Breakover Voltage (dv/dt = vV/µs)
Breakover Voltage (dv/dt = 1V/µs)
× 100 (%)
Junction Temperature (°C)
× 100 (%)
Typical Example
Breakover Voltage (dv/dt = vV/µs)
Breakover Voltage (dv/dt = 1V/µs)
103
Gate Trigger Current (tw)
Gate Trigger Current (DC)
Breakover Voltage (Tj = t°C)
Breakover Voltage (Tj = 25°C)
× 100 (%)
Breakover Voltage vs.
Junction Temperature
Repetitive Peak Reverse Voltage (Tj = t°C)
Repetitive Peak Reverse Voltage (Tj = 25°C) × 100 (%)
CR25RM-12D
103
7
5
Typical Example
3
2
102
7
5
3
2
101
10–1 2 3 5 7 100 2 3 5 7 101 2 3 5 7 102
Gate Current Pulse Width (µs)
CR25RM-12D
Package Dimensions
Previous Code
TO-3PFM / TO-3PFMV
15.6 ± 0.3
4.0 ± 0.3
2.6
0.86
+ 0.4
– 0.2
2.7 ± 0.3
2.0 ± 0.3
φ3.2
Unit: mm
5.5 ± 0.3
3.2 ± 0.3
1.6
0.86
0.66
5.45 ± 0.5
MASS[Typ.]
5.2g
21.0 ± 0.5
RENESAS Code
PRSS0003ZA-A
5.0 ± 0.3
JEITA Package Code
SC-93
5.0 ± 0.3
19.9 ± 0.3
Package Name
TO-3PFM
+ 0.2
– 0.1
0.2
0.9 +– 0.1
5.45 ± 0.5
Order Code
Lead form
Straight type
Standard packing
Magazine (Tube)
Quantity
30
Standard order code
Type name
Note : Please confirm the specification about the shipping in detail.
REJ03G1716-0100
Page 6 of 6
Rev.1.00
Jul 08, 2008
Standard order
code example
CR25RM-12D
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Notes:
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes
warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property
rights or any other rights of Renesas or any third party with respect to the information in this document.
2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including,
but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples.
3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass
destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws
and regulations, and procedures required by such laws and regulations.
4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this
document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document,
please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be
disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com )
5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a
result of errors or omissions in the information included in this document.
6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability
of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular
application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products.
7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications
or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality
and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or
undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall
have no liability for damages arising out of the uses set forth above.
8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below:
(1) artificial life support devices or systems
(2) surgical implantations
(3) healthcare intervention (e.g., excision, administration of medication, etc.)
(4) any other purposes that pose a direct threat to human life
Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing
applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all
damages arising out of such applications.
9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range,
movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages
arising out of the use of Renesas products beyond such specified ranges.
10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain
rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage
caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and
malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software
alone is very difficult, please evaluate the safety of the final products or system manufactured by you.
11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as
swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products.
Renesas shall have no liability for damages arising out of such detachment.
12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas.
13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have
any other inquiries.
http://www.renesas.com
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology (Shanghai) Co., Ltd.
Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7858/7898
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2377-3473
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 3518-3399
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
Renesas Technology Malaysia Sdn. Bhd
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
© 2008. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .7.2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement