Ei100MRF - RadioLINK+ Module RadioLINK+ RF Wireless interconnect rconnect

Ei100MRF - RadioLINK+ Module
Ei100MRF - RadioLINK+ Module
RadioLINK+
RF Wireless interconnect
rconnect
Key Features
RF Upgrade for Mains Powered
ered “e” Series Alarms
ign
Simple plug in modular design
Tricolour LED to indicate RF status
wire and/or wireless
Interconnect up to 12 hardwire
vices
communicaon Alarms/devices
eats RF specific data
Transmits, receives and repeats
Mul-path communicaon protocol
Unique House Coding confines communicaon to
selected RadioLINK devices
Remote Alarm Learn entry
RF Monitoring
Alarm Status & Parameter informaon download
via RadioLINK tool
Powered through the Alarm head
5 Year Guarantee
Supply Voltage:
Baery Back-up:
RF Frequency:
RF Power:
RF Protocol:
RF Range:
System size:
Temperature:
Humidity Range:
Indicators:
Product Description
The Ei100MRF is an oponal add-on RadioLINK+ module for the
Ei160e and Ei2110e series Alarms. The module simply plugs into the
designated slot in the base of the Alarm head. The immediate
flashing LED indicates that the module has been fied correctly.
The Ei100MRF module facilitates wireless interconnecon with up
to 12 RadioLINK devices. It also facilies a hybrid communicaon
of hardwired and wireless connecons.
The Ei100MRF module is a SRD using a TI transceiver device to
transmit, receive and repeat the RadioLINK RF protocol. This ensures
a robust “mesh” of RF signals and reliable paths of communicaon.
The house coding feature confines the RF communicaon to
designated RadioLINK devices only, thereby avoiding the inadvertent
acvaon of neighbouring Alarm RF systems.
The Remote Alarm Learn entry feature allows the installer to reacvate the enre RF system house coding from one device.
Addional devices can then be added and house coded accordingly.
Ei100MRF Data Sheet Rev 0
Technical Specification
RF monitoring of the signal paths is facilitated through a “buddy”
system. Each device will “buddy up” to at least one other device. If
the signal path fails, the “buddy” will transmit a communicaon lost
signal. Informaon such as alarm events, fault events, test acvaons,
and Alarm head removals can now be downloaded using the
RadioLINK tool.
E & OE
Plasc material:
Dimensions:
Weight:
Warranty:
Approvals:
230V AC, 50Hz (Via Alarm head)
Rechargeable lithium (Via Alarm Head)
868.499Mhz RadioLINK protocol
+10dBm
Proprietary RadioLINK+ using mul-path,
mul-repeater mesh architecture.
> 100Metres in free air.
12 RadioLINK devices
Operang - 0 to 40°C
Storage - 0 to 35°C (in a dry area)
15% to 95% Relave Humidity
Blue LED – typically RF transmission, house
code mode indicator, code reset
Green LED - typically monitoring mode
indicator, alternang with blue led to indicate
monitoring success
Red LED – typically monitoring mode cancel,
alternang with blue led to indicate
monitoring failure
UL94VO flame retardant
Product - 80mm x 18mm x 16mm
10g.
5 year (limited) warranty
CE cerfied
EN300220-2 (Radio)
EN301489-3 (EMC)
EN62479:2010 (Safety)
Specificaons are subject to change
Shannon Free Zone, Shannon, Co. Clare, Ireland.
Tel: +353 61 471277 Fax: +353 61 471053
email: [email protected]
web: www.eielectronics.com
As our policy is one of connuous product development, we reserve the right to alter product details without prior noce.