Norgren T1100C1800 form flow control valve Datasheet

Add to My manuals
2 Pages

advertisement

Norgren T1100C1800 form flow control valve Datasheet | Manualzz

T1100

Block form flow regulators (bi-directional)

> Port size:

G1/8, G1/4 & G1/2

> Compact size

(low weight) in-line units

> High flow performance

> Suitable for panel and wall mounting

> Adjustment can be locked

> Captive regulator needle will not blow out when unscrewed

> Adjusting knob position line

> Metered in both directions

Technical features

Medium:

Compressed air, filtered, lubricated or non-lubricated, inert gases

Operation:

Flow regulators (bi-directional)

Operating pressure:

0 ... 10 bar (0 ... 145 psi)

Port size:

G 1/8, G 1/4, G1/2

Mounting:

Line mounted

Ambient/Media temperature:

-20 ... +80°C (-4 ... +176°F)

Air supply must be dry enough to avoid ice formation at temperatures below +2°C (+35°F).

Materials:

Body: aluminium alloy (painted)

Seals: low nitrile

Internal parts: brass

External parts: aluminium alloy

(anodised)

Needle: brass (nickel plated)

Technical data, standard models

Symbol Port size Maximum regulated flow factor

G1/8

G1/4

G1/2

C *1)

0,57

1,3

7,5

Cv

0,14

0,32

1,84

Kv *2)

0,12

0,28

1,6

*1) Measured in m 3

*2) Measured in m 3

/(s. bar)

/h

Operating pressure

(bar)

0 ... 10

0 ... 10

0 ... 10

Weight

(kg)

0,031

0,056

0,180

Model

T1100C1800

T1100C2800

T1100C4800

Option selector

Thread form

ISO G, parallel

NPT

Substitute

C

A

T1100˙˙˙00

Port size

1/8”

1/4”

1/2”

Substitute

18

28

48

Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (1998 - 5224e) © 2015 Norgren Ltd.

3/15 en 5.10.180.1

T1100

Block form flow regulators (bi-directional)

Flow vs turns at 6 bar – flow in dm 3 /s

1/8” version

5

4

3

2

1

0

0 1 2 3 4 5 6 7

Number of turns

8

1/2” version

60

50

40

30

20

10

0

0 2 4 6 8 10

Number of turns

12 14 16

9 10 11 12

Drawing

G

L

1

ø H

1/4” version

6

4

10

8

2

0

0 1 2 3 4 5 6 7

Number of turns

8 9 10 11 12

B A

J

A B C D F G H J K L

G1⁄8 34 20 51 16,5 24 4,5 16 8

G1⁄4 45 25,5 61,5 21 32 4,5 19

M12 x 1 14

9,5 M14 x 1 17

G1/2 65 36 82 30,5 50 6,5 30 15 M20 x 1 24

9

9

14

1

Panel hole

12,5

14,5

20,5

Max. panel thickness

4

4

4

Model

T1100C1800

T1100C2800

T1100C4800

Dimensions in mm

Projection/First angle

Warning

These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under

»Technical features/data«.

Before using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI NORGREN.

Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes.

en 5.10.180.2

The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure.

System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided.

System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products.

Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (1998 - 5224e) © 2015 Norgren Ltd.

3/15

advertisement

Related manuals

Download PDF

advertisement