PULLMAN-HOLT 102ASB 12PD dry asbestos vacuum cleaner Operation & Care Instructions

Below you will find brief information for dry asbestos vacuum cleaner 102ASB 12PD. The 102ASB 12PD is a high-quality, precision-made product, equipped with a 2-stage, 11.1 amp, 2HP by-pass motor, developing 105" waterlift and 110 CFM. It features a HEPA filter and a water pick-up pan for efficient dust and debris removal. The vacuum cleaner also has a safety valve (float) to automatically prevent further liquid intake.

PDF Download
Document
PULLMAN-HOLT Dry Asbestos Vacuum Cleaner 102ASB 12PD | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • 2-stage, 11.1 amp, 2HP by-pass motor
  • 105" waterlift and 110 CFM
  • HEPA filter
  • water pick-up pan
  • Safety valve (float)

Frequently asked questions

The vacuum motor is warrantied for 1 year.

Parts other than filters are warrantied for 90 days from the date of purchase.

Contact the Pullman-Holt National Service Manager in Tampa, FL at (800) 237-7582.

Remove the vacuum head and HEPA filter. Tape a 6-mil poly bag over the canister so that the canister is completely enclosed. Using the poly bag as a glove, disengage the paper bag from the vacuum inlet stem inside the canister. Invert the canister so that the paper bag falls into the poly bag. Seal the poly bag and dispose as prescribed by law. Attach a new paper bag to the vacuum inlet securely and fold the top of the bag down so it does not interfere with the HEPA filter. Replace the HEPA filter and motor head. Thoroughly vacuum the work area to recover any asbestos dust which may have been dropped.

Refer to the chart provided in the IMPORTANT SAFEGUARDS section.
Preparing document for printing…
0%