PowerWalker VFI 3/3 Series User manual
Reliable Power Protection
2014 CATALOG
UNINTERRUPTIBLE POWER SUPPLY
www.powerwalker.com
Index
Introduction to the Uninterrupted Power Protection Technologies
Home/SMB
04. Overview Home/SMB/Inverter
INVERTER
06. Inverter
08. Inverter Applications
AVR
|Series
VFD
|Series
10. AVR 600/1000/1200
AVR
AVR TECHNOLOGY
LINE-INTERACTIVE TECHNOLOGY
The AVR system ensures a steady and constant
power supply by automatically regulating the
voltage at the appropriate level by the decline
during the surge or the increase when voltage
drops in the power line.
The VI (Voltage Independent) Series of PowerWalker
ensures stable and consistent power supply, thanks
to its Automatic Voltage Regulator (AVR). The AVR
regulates voltage at the appropriate level by the
decline during the surge or increase when voltage
drops in the power line. VI prevent from electrical
damage to both professional and consumer
electronic equipments.
11. VFD 600/800 APFC
12. VFD 600/1000
13. VFD 600/800 IEC
VI LED
|Series
V I LC D
|Series
14.
15.
16.
17.
18.
20.
21.
22.
VI 650/850 LCD
VI 1000/1500/2000 LCD
VI 750/1000/1500/2000 PSW
VI 600/800 SW
Technical specifications
Overview Specs
Professional UPS
24.
INPUT
VI 650/850 SE
VI 1200/2200
VI Rack/Tower
26.
VI 1000/1500/2000/3000RT LCD
28.
30.
VFI 1000/1500/2000/3000RT LCD
VFI 6000/10000RT LCD
VFI Rack/Tower
VFI Tower
28.
30.
31.
32.
34.
36.
38.
40.
42.
AVR
VFI 1000/1500/2000/3000 LCD
VFI 6000/10000 LCD
Technical Specifications
VFI 1000/2000/3000 LCD
VFI 6000/10000C LCD
Technical Specifications
VFI 1000/2000/3000T LCD
VFI 6000/10000T
Technical Specifications
VFI Rack
44.
46.
48.
VFI 1000/1500/2000/3000RM LCD
VFI 6000R/10000R LCD
Technical Specifications
50.
52.
53.
54.
55.
VFI 10000TCP 3/1
VFI 10000/20000TP 3/1
Technical Specifications
Optional Accessories 3-1 Phase Models
Redundant / Parallel Mode
VFI 3-1 Phase
VFI 3/3 Phase
OUTPUT
The AVR is designed to prevent damage to
electrical equipment sensitive to voltage variations, such as domestic electrical equipment
(TV, monitors, game consoles, audio / video
equipment, telephony, etc.), prolonging the life
of these.
Hi-Power
Overview Professional/Hi-Power
VI
|Series
VF D
TRANSFER
SWITCH
OUTPUT
INPUT
AC/DC
DC/AC
TRANSFER
SWITCH
AVR
OUTPUT
INPUT
AC/DC
DC/AC
BATTERY MODE
CHARGER
BATTERY
operating systems for maintenance and monitoring of
voltage, power, battery status, programmed off, etc..
VI Series are specially designed to deliver a
professional performance with medium loads at
the output and very good value-cost relationship.
V FI
|Series
ON-LINE TECHNOLOGY
PowerWalker VFD (Voltage and Frequency
Dependent) Series protect your computer
equipment against power outages. It is equipped
with overload and over discharge protection of
battery, and overload at the output. It is reliable
and has high performance with very low costs.
PowerWalker VFD Series switches to battery
AC MODE
VI have a USB and most models also Serial (RS232) port to connect the unit to a large number of
AC MODE
|Series
OFF-LINE TECHNOLOGY
BYPASS MODE
AVR function also increases the lifespan of the
battery. When the voltage is outside the acceptable
range (± 10V Nominal Voltage) the AVR will adjust
the voltage at nominal value without having to go
into battery mode. In case of exceeding the range
of acceptable input voltage, the UPS switches to
battery mode directly to prevent cuts and the
consequent damage to the equipment connected
to the output.
BYPASS MODE
|Series
BATTERY MODE
CHARGER
BATTERY
mode when the input voltage is not within the
acceptable nominal voltage range. If the voltage
returns to normal, the UPS will return to AC
power. It is a simple and affordable solution
for protecting your computer equipment.
Furthermore, its design is very compact.
VFI (Voltage and Frequency Independent) Series of
PowerWalker always provide clean of imperfections
electric power thanks to the implementation of the
On-Line technology.
VFI (Voltage and Frequency Independent) Series
of PowerWalker are built with On-Line True
Double Conversion Technology. In the first phase
of conversion, the AC power at the input of the
UPS becomes DC power. Then in the second phase,
DC electricity is converted back to AC power. In
this way, the load connected to the UPS output is
isolated from the electrical current input and its
imperfections. The result is an always clean and
stable output power.
Another advantage of this technology is its
“zero” transfer time, in case of a total power
failure at the entrance. In addition, the VFI Series
of PowerWalker provide more reliable voltage
regulation, with its tolerance between 1% and 3%
of the nominal value.
BYPASS MODE
PFC
AC/DC
INPUT
AC/DC
ONLINE MODE
TRANSFER
SWITCH
DC/AC
DC/AC
OUTPUT
BATTERY MODE
CHARGER
BATTERY
VFI Series of PowerWalker are specially designed
for all professional applications. Especially for
Industrial Applications, Data Processing Center
(DPC), Cloud Computing, High Power Applications,
Financial Services, Medical Centers, Critical
Applications in general, etc..
VFI Series of PowerWalker have an USB and a
Serial (RS-232) port to connect the unit to a large
number of operating systems for maintenance,
monitoring of voltage, power, battery status,
shutdown programming, etc.
56. VFI 20000/30000/40000 (BX, BE, BI) 3P/3P
58. Technical Specifications
61. VFI 3/3 phase accessories and battery packs
2
3
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
Home/SMB UPS/Inverter
Inverter
VFD
1000VA
2000VA
3000VA
600/650VA
750/800/850VA
5000VA
| Series
1000VA
1200/1500VA
2000/2200VA
1000VA
1200/1500VA
2000/2200VA
| Series
Standby/Off-line
VI LED
| Series
Line Interactive
V I LC D
| Series
Line Interactive
V I LC D
| Series
Line Interactive Pure Sine Wave
600VA
600/650VA
800VA
750VA
750/800/850VA
4
5
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
INVERTER
Professional UPS
INVERTER
Inverter 1000/2000
Inverter 3000 PSW / 5000 PSW
3000 PSW
l 1000VA/2000VA Inverter
l Schuko outlet
l Rack/Tower design
l Built-in 10A super charger
l Off mode charging
l High Frequency design
l User selectable for accepting wider input voltage range
l Full automatic and silent operation
l 3-steps intelligent charging control to reduce recharging time
l Compact size for convenient use and storage
The 1000/2000VA Inverter/Charger system
converts DC power to AC power with amazing
transfer efficiency. Appliances such TVs, stereos,
notebook computers can be connected for the
uninterruptible power. When encountering
utility power failure, this series will transfer
Inverter 1000/2000
from “LINE mode” to “Inverter mode” for
acquiring the power from battery supply. With
the continuous output and compact design,
this series is perfect for any home or SMB (small
medium business) environment.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
3000VA/5000VA Inverter with Pure Sine Wave
High Performance Long Backup Power Solution
Built-in 20A/25A super charger
LCD display for status view and Inverter settings
Isolated Input/Output design for max. safety operation
Pure Sine Wave for wide range of applications and harsh environment
High-frequency switching technology for compact size and light weight
Configurable: Input Type, Output voltage, Battery type, charging current
Fulfil the demands of heavy-duty industrial environment.
High efficient (>90%) DC-to-AC conversion
High Efficiency PFC charger design
Low power “Power Saving Mode”
High power density design (up to 385W/dm³)
Protection: Input low/over voltage, Overload,
Low battery alarm, Short circuit, Over temperature
The 3000/5000VA Pure Sine Wave Inverter/Charger
system adopts superior features and is designed
with the highest standards in the industry. The
high frequency structure reduces the size and
achieves the highest power density in the market.
Comprehensive LCD display provides system status,
and user-friendly panel eases program settings.
Designed for diverse applications, this 3000/5000VA
Inverter promises to fulfil the demands from any
home or SMB to heavy-duty industrial environment.
5000 PSW
Inverter 3000/5000 PSW
6
7
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
Professional UPS
INVERTER
INVERTER
Applications
Inverter 1000/2000 - 3000/5000PSW
Application Examples Inverter 1000/2000
MODEL
Power
INPUT
Voltage
Voltage Range
OUTPUT
Voltage
Voltage Regulation
1000VA
1000VA / 600W
Application Examples Inverter 3000/5000 PSW
Depth x Width x Height (mm)
Weight
Fan Control
Noise Level
ENVIRONMENT
Temperature
Humidity
10%
10% RMS
50 or 60Hz
(Battery Mode)
DC Voltage
Overcharge Protection
Charger Power Factor
BATTERY
Type
Optional
FULL PROTECTION
Discharge
Overcharge
Overload
Short circuit
CONNECTIONS
Outlets
PRODUCT DETAILS
Dimensions
5000PSW
5000VA / 4200W
230VAC
+10 % / -18%
Frequency
Freq. Regulation
Charger current
3000PSW
3000VA / 2400W
220/230/240VAC
170-280VAC (Narrow Range) 90-280VAC (Wide Range)
(Battery Mode)
Waveform
TRANSFER TIME
Typical
Max
CHARGER
Charger algorithm
2000VA
2000VA / 1200W
± 0.5 Hz
± 0.1 Hz
Modified Sine Wave
Pure Sine Wave
20 ms
40 ms
10ms
-
10ms (Input Setting NOR)
-
Three stage profile (CC/CV/Floating) CC=Constant Current CV=Constant Voltage
25A @ 180~280V
10A ± 1A
20A ± 2A
20A @ 125~180V
12V
24V
24V
48V
16V ± 0.4V
30V ± 0.8V
30V
60V
>0.95
12V
24V
24V
Inverter is supplied without battery
48V
Yes
Yes
Yes
Yes
Schuko
Schuko
Terminal outlet
Terminal outlet
224 x 255 x 80
224 x 255 x 80
294 x 269 x 76
407 x 350 x 110
2.3 kg
2.5 kg
4.9 kg
AUTO
OFF: in LINE mode (if charge current below 3A (±1A)
ON: in battery mode and line mode if charge current above 3A (±1A)
9.0 kg
HEAT SINK TEMP
60% speed @ 55°C-78°C
100% speed >78°C
CHARGING MODE
60% Floating
100% CC or CV
LOAD
60% @ 0-50% load
100% if ≥50% load
(switch back to 60%
if load ≤ 40%)
< 50dB
< 60dB
0°C – 40°C
0 – 90 % RH (non-condensing)
0°C – 45°C
5 – 95 % RH (non-condensing)
8
9
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
Home/SMB UPS
AV R
V FD
| Series
Standby/Off-line
Automatic Voltage Regulator
l
l
l
l
l
| Series
Stabilizes the mains voltage
voltage Regulation through AVR
Surge protection on phone line and modem
3 Schuko type outlets
Compact and lightweight
l
l
l
l
l
AVR Series ensures a steady and constant
power, automatically regulating the
voltage at the appropriate level by the
decline during the surge or increase
when voltage drops in the power line.
Off-Line Technology
Supports full rating APFC power supplies
6 Schuko or French Schuko Type sockets
Most economic back up solution
Easy user-replaceable battery design
Equipped with a technique, that allows using
the full power of the UPS, even when used with
APFC power supply load this series offers a most
economic back up solution.
Usually required oversizing of a UPS when connecting
an APFC power supply is not needed with this series.
This allows to choose smaller cost-effective UPS with lower
purchase price and lower own power consumption that saves
energy cost.
The AVR is designed to prevent damage
in any electrical equipment sensitive
to voltage variations, such as domestic
electrical equipment (TV, monitors, game
consoles, audio / video, telephony, etc.),
prolonging the life of those.
Equipped with 6 Schuko-Type outlets or 6 French Schuko-Type
outlets (all with surge protection, 4 with battery backup) these
models can be used like a power strip.
Also recommended to protect low-power
industrial equipment.
A special battery compartment enables an easy exchange of the
rechargeable battery by the user.
AVR 600/1000/1200
VFD APFC 600/800
MODEL
Power (VA)
Power (W)
INPUT
AVR 600
AVR 1000
AVR 1200
600VA
360W
1000VA
600W
1200VA
720W
Voltage Range
Frequency
180-264Vac
50Hz
OUTPUT
Voltage
Voltage Regulator (AVR)
Frequency
Protection
AC mode
AVR (active)
Green LED
Red LED
Output
Protection Port
3x Schuko
RJ11 in/out
CONNECTIONS
PRODUCT DETAILS
Dimensions
Depth x Width x Height (mm)
Colour
Weight
ENVIROMENT
1,7kg
Temperature
Humidity
Noise level
AVR PowerWalker 600,
User Manual
AVR PowerWalker 1000,
User Manual
800VA
420W
170~270 Vac
230Vac
50Hz/60Hz
Same as input
Step wave
Same as input voltage
230Vac ±10%
Same as input frequency
50Hz/60Hz ±1Hz
2-8ms typical ,12ms Max
BATTERY
Type & Number
Backup time
Recharge time
PROTECTION
2,1kg
0°C - 40°C
0 - 90% (non condensing)
< 40dB at 1 meter
PACKAGE CONTENT
VFD APFC 800
600VA
300W
Line Mode
Battery Mode
Line Mode Voltage
Battery Mode Voltage
Line Mode Frequency
Battery Mode Frequency
Transfer time
166 x 161 x 86,7mm
Black Colour
1,9kg
INPUT
VFD APFC 600
OUTPUT
Output Overload, Shortcircuit, overheating
LED INDICATORS
Power (VA)
Power (W)
Voltage Range
Nominal Voltage
Frequency
230Vac ±10%
±8%
50Hz
PROTECTION
MODEL
PHYSICAL
Dimensions
Depth x Width x Height (mm)
Weight
Outlets
ENVIROMENT
AVR PowerWalker 1200,
User Manual
Temperature
Humidity
12V/5Ah*1
12V/7Ah*1
100W SPS LOAD
10 hours max. (Recharge to 90% Capacity)
TVSS / Over load / Short Circuit Protection/Over charge
320*125*86(mm)
335*170*92.5(mm)
3.1kg
4.1kg
Schuko type/French type
6 outlets (2 for surge only, 4 for battery backup)
0°C - 40°C
0 - 85%
10
11
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
Home/SMB UPS
VFD
V FD
| Series
Standby/Off-line
| Series
Standby/Off-line
l Off-Line Technology
l IEC type sockets
l Cold DC start Function
l Overload protection at the output
l Overload and over discharge protection of battery
PowerWalker VFD Series protect your
computer equipment against power outages.
It is equipped with overload and over
discharge protection of battery to prolong its
life. It also protects against overload at the
output. It has high performance and reliability
with very low costs.
Optional Accessories
VFD 600
l
l
l
l
l
l
l
Off-Line Technology
VFD 1000
Schuko type sockets
Cold DC start Function
Overload protection at the output
Overload and over discharge protection of battery
Surge protection on phone line and modem
Highly compact and lightweight
PowerWalker VFD Series protect
your computer equipment against
power outages.
It is equipped with overload and
over discharge protection of battery
to prolong its life. It also protects
against overload at the output. It
has high performance and reliability
with very low costs.
PowerWalker VFD Series switches
to battery mode when the input
voltage is outside the voltage range
set. If the voltage returns to normal,
the UPS will return to AC power.
It is a simple, compact and very affordable equipment to protect your
computer and electronics.
PowerWalker VFD Series switches to battery
mode when the input voltage is outside the
voltage range set. If the voltage returns to
normal, the UPS will return to AC power.
VFD 1000
VFD 600
MODEL
Power (VA)
Power (W)
INPUT
Voltage Range
Frequency Range
OUTPUT
Voltage
Voltage Regulation (Battery Mode)
Frequency
Frequency Regulation (Battery Mode)
Transfer Time
VFD 600/800 IEC
MODEL
Power (VA)
Power (W)
INPUT
Voltage Range
Frequency Range
OUTPUT
VFD 600
600 VA
300 W
VFD 1000
1000 VA
600 W
170-280Vac
50Hz
230Vac ±10%
±10%
50Hz
±1Hz
2-6 ms
AC mode to Battery mode
Waveform (Battery Mode)
Protection
BATTERY
Type
Quantity
Recharge Time
Protection
CONNECTIONS
Output
Protection Port
PRODUCT DETAILS
Dimensions
Depth x Width x Height (mm)
Weight
ENVIROMENT
Temperature
Humidity
Noise level
It is a simple, compact and very affordable
equipment to protect your computer and
electronics.
Modified Sinewave
Output Overload
VFD 600 IEC
600 VA
360 W
180-270Vac
50Hz
Voltage Regulation
Transfer Time
Waveform
BATTERY
Type
Quantity
Recharge Time
CONNECTIONS
Output
PRODUCT DETAILS
Dimensions
Depth x Width x Height (mm)
Weight (kg)
ENVIROMENT
Temperature
Humidity
VFD 800 IEC
800 VA
480 W
±10%
Typical 2-6 ms
Simulated Sine Wave
12V / 7Ah
1
8 hours recover to 90% capacity
12V / 9Ah
2x IEC
228 x 82.5 x 207
2,7
3,1
0°C - 40°C
0 - 90% (non condensing)
12V / 7Ah
1
2
10h to 90% after complete discharge
Battery Overload and Overdischarge
2x Schuko
RJ11 in/out
3x Schuko
231 x 81 x 185
312 x 94 x 205
3,1kg
6,7kg
0°C - 40°C
0 - 90% (non condensing)
< 40dB at 1 meter
12
13
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
Home/SMB UPS
VI LED
| Series
VI 650SE/850SE/1200/2200 (Schuko, French, IEC/UK)
Line Interactive
Schuko type
l Line-Interactive Technology
IEC type
l Automatic Voltage Regulator (AVR)
l 2 Schuko / 2 French / 4 IEC Type outlets (650/850 VA)
l 2x IEC Type + 2x Schuko / 2 French or 6 IEC Type outlet
VI2200 Schuko type
MODEL
Power (VA)
Power (W)
INPUT
Voltage
Voltage Range
Frequency Range
OUTPUT
Voltage Regulation
Frequency Range
Transfer Time
(1200/2200 VA)
l Cold DC start Function
l Overload protection at the output
l Overload and over discharge protection of battery
l Surge Filter protection for phone line and modem
l Communication USB
l WinPower software for controlling and monitoring
VI 650 SE
650VA
360W
VI2200 French Schuko type
VI 850 SE
850VA
480W
230Vac ±10 %
50/60Hz
Typical 4-8 ms
AC mode to Battery mode
Modified Sine wave
(Battery Mode)
AVR function also extends the battery life.
When the voltage level is less than 10%
of rated voltage the AVR set the voltage to
the nominal level without having to go into
battery mode, avoiding a cycle of loading and
unloading.
In case of exceeding the range of input
voltage, the UPS switches to battery mode
directly to prevent cuts or surges and the
Optional Accessories
French Schuko type
consequent damage to the equipment connected to
the output.
VI 650/850SE, VI 1200/2200 features a USB-port
to connect the unit to a large number of operating
systems for monitoring and voltage control, power,
battery status, programmed off, etc.
VI Series of PowerWalker offers professional features
for low and medium loads at the output, with a very
good cost-benefit ratio. Especially recommended to
protect computers, LCD TVs, game consoles, video
surveillance cameras, etc..
Protection
BATTERY
Type
Quantity
Recharge Time
Protection
CONNECTIONS
Communications
Output
Protection Port
REQUIREMENTS AND SOFTWARE
Software
Ports
PRODUCT DETAILS
Dimensions
Depth x Width x Height (mm)
Weight
ENVIROMENT
Temperature
Humidity
Noise level
VI 2200
2200VA
1100W
230Vac
170-280Vac
50/60Hz (Auto)
Waveform
PowerWalker VI Series ensures steady and
constant power thanks to its Automatic
Voltage Regulator (AVR). The AVR regulates
voltage at the appropriate level by the decline
during the surge or increase when voltage
drops in the power line. The VI Series of
PowerWalker prevents electrical damage
of professional equipment and consumer
electronics at home.
VI 1200
1200VA
600W
Discharge, Overcharge and Overload Protection
12V / 7Ah
12V / 9Ah
2
6h to 90% after complete discharge
Battery Discharge, Overcharge and Overload Protection
1
12V / 9Ah
12V / 7Ah
USB
2x Schuko
RJ11/RJ45 in/out
2x Schuko, 2x IEC
WinPower
1x USB port
279 x 100 x 143
4,4kg
5,0kg
365 x 139 x 195
8,6kg
0°C - 40°C
0 - 90% (non condensing)
< 40dB at 1 meter
10,2kg
< 45dB at 1 meter
14
15
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
Home/SMB UPS
V I LC D
| Series
VI 650/850/1000/1500/2000 LCD (Schuko, French, UK)
Line Interactive
PowerWalker VI Series with LineInteractive technology and informative
LCD panel ensures a steady and constant
power supply thanks to its Automatic
Voltage Regulator (AVR). The AVR regulates voltage at the appropriate level by
the decline during the surge or increase
when voltage drops in the power line. VI
Series of PowerWalker prevent electrical
damage of professional equipment and
consumer electronics at home.
l Line-Interactive Technology
l Automatic Voltage Regulator (AVR)
l LCD panel with operating information: Power Input /
l
l
l
l
l
l
l
l
l
Output Mode AC / Battery, Load Level, Battery Level
2 Schuko, 2 French or UK type outlets (650/850 VA)
2 IEC + 2 Schuko/French (1000 /1500/2000VA)
4 UK outlets (1000 VA), 5 UK outlets (1500/2000 VA)
Cold DC start Function
Overload protection at the output
Overload and over discharge protection of battery
Surge Filter for phone line and modem
USB Communication
ViewPower software for controlling and monitoring
Optional Accessories
AVR function also extends the battery
life. When the voltage level is less than
10% of rated voltage the AVR set the
voltage to the nominal level without
having to go into battery mode, avoiding a cycle of loading and unloading.
In case of exceeding the range of input
voltage, the UPS switches to battery
mode directly to prevent cuts or surges
and the consequent damage to the
equipment connected at the output.
VI Series of PowerWalker offer a USB port
to connect the unit to a large number of
operating systems for monitoring voltage, power, battery status, programmed
off, etc.
VI Series of PowerWalker offers professional features for low and medium
loads at the output, with a very good
cost-benefit ratio. Especially recommended to protect computers, LCD
TVs, game consoles, video surveillance
cameras, etc
VI 1000 LCD French Schuko
VI 1500/2000 LCD
MODEL
Power (VA)
Power (W)
INPUT
Voltage Range
Frequency Range
OUTPUT
Voltage Regulation
Frequency Regulation
Transfer Time
AC mode to Battery mode
VI 650 LCD
650VA
360W
VI 850 LCD
850VA
480W
VI 1000 LCD
1000VA
600W
VI 1500 LCD
1500VA
900W
VI 2000 LCD
2000VA
1200W
162-290Vac
50/60Hz (Auto)
230Vac ±10 %
50/60Hz ±1Hz
2-6 ms
4-8 ms
Waveform (Battery Mode)
Modified Sinewave
Protection
Shortcirquit and Output Overload
BATTERY
Type
12V / 7Ah
12V / 9Ah
12V / 7Ah
12V / 9Ah
Quantity
1
2
2
Recharge Time
4-6 hours to 90% after complete discharge
Protection
Discharge and Battery Overload
CONNECTIONS
Communications
USB
Output
2x Schuko
2x Schuko, 2x IEC
Protection Port
RJ11 in/out
REQUIREMENTS AND SOFTWARE
Software
ViewPower
Ports
1x USB port
PRODUCT DETAILS
Dimensions
287 x 100 x 142
350 x 146 x 165 397 x 146 x 205 397 x 146 x 205
Depth x Width x Height (mm)
Colour
Black
Weight
4,3kg
5,0kg
8,0kg
10,7kg
11,6kg
ENVIROMENT
Temperature
0°C - 40°C
Humidity
0 - 90% (non condensing)
Noise level
< 40dB at 1 meter
VI 1000 LCD
16
17
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
Home/SMB UPS
V I LC D
| Series
VI 750/1000/1500/2000 PSW
Line Interactive Pure Sine Wave
l
l
l
l
l
l
l
l
l
l
l
l
Line-Interactive Technology
Pure Sine Wave output
Automatic Voltage Regulator (AVR)
LCD panel with operating information: Power Input / Output
Mode AC / Battery, Load Level, Battery Level
4 IEC outlets (VI750/1000PSW), 6 IEC outlets (VI1500/2000PSW)
Cold DC start Function
Overload protection at the output
Overload and over discharge protection of battery
Surge Filter for phone line and modem
USB Communication
ViewPower software for controlling and monitoring
Optional Accessories
With its high efficient digitalized PWM-based
controller PowerWalker VI PSW series provides a
pure sine wave output for best protection for sensitive equipment.
A comprehensive display allows monitoring the
power status very easily.
Especially best suitable to protect modern PC like
mini servers, gaming PC, point of sale (POS) systems
and other electronic devices with APFC power
supplies.
MODEL
Power (VA)
Power (W)
INPUT
Voltage Range
Frequency Range
OUTPUT
Voltage Regulation
Transfer Time
VI 750 PSW
750VA
480W
50/60Hz ±1Hz
Not only limited to APFC power supplies and
equipped with a voltage stabilizer, this UPS will
continue providing clean and stable power to
connected equipment and is perfect for any home
or small and medium office application.
VI 1500 PSW
1500VA
1050W
VI 2000 PSW
2000VA
1400W
162 - 290 Vac
50/60Hz (Auto Sensing)
±10%
Typical 2-6 ms, 10 ms max.
AC mode to Battery mode
Waveform (Battery Mode)
Protection
BATTERY
Type
Quantity
Recharge Time
Protection
CONNECTIONS
Communications
Output
Protection Port
REQUIREMENTS AND SOFTWARE
Software
Ports
PRODUCT DETAILS
Dimensions
Depth x Width x Height (mm)
Colour
Weight
ENVIROMENT
Humidity
Noise level
VI 1000 PSW
1000VA
700W
Pure Sine Wave
Short circuit and overload protection
12V / 9Ah
1
12V / 7Ah
12V / 9Ah
12V / 10Ah
2
6h to 90% after complete discharge
Discharge, Overcharge, Overload and Short circuit protection
4x IEC
6x IEC
RJ11/RJ45 in/out
Viewpower
1x USB port
350 x 146 x 160
6.8kg
9.0kg
397 x 146 x 205
12.2kg
13.7kg
0 - 90% RH @ 0 - 40º C (non condensing)
< 40dB at 1 meter
18
19
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
Home/SMB UPS
V I LC D
| Series
Line Interactive Pure Sine Wave
VI 600SW / 800SW
Especially best suitable to protect
modern PC like mini servers,
gaming PC, point of sale (POS)
systems and other electronic
devices with APFC power supplies.
Not only limited to APFC power
supplies and equipped with a voltage stabilizer, this UPS will continue
providing clean and stable power
to connected equipment and is
perfect for any home or small and
medium office application.
MODEL
Power (VA)
Power (W)
INPUT
Voltage Range
Frequency Range
OUTPUT
Voltage Regulation
Frequency Regulation
Transfer Time
l
l
l
l
l
l
l
l
l
l
l
l
Line-Interactive Technology
Pure Sine Wave Output
Automatic Voltage Regulator (AVR)
LCD panel with operating information: Power Input / Output
Mode AC / Battery, Load Level, Battery Level
3 IEC type outlets
Cold DC start Function
Overload protection at the output
Overload and over discharge protection of battery
Surge Filter for phone line and modem
USB Communication
ViewPower software for controlling and monitoring
VI 600 SW
600VA
360W
VI 800 SW
800VA
480W
162-290Vac
50/60Hz (Auto)
Line Interactive
MODEL
Power (VA)
Power (W)
INPUT
Voltage Range
Frequency Range
OUTPUT
Voltage Regulation
Frequency Regulation (Battery Mode)
Transfer Time
AC mode to Battery mode
Waveform (Battery Mode)
Protection
BATTERY
Type
Quantity
Recharge Time
Protection
LED INDICATORS
AC mode
Battery Mode
AUDIO INDICATORS
Battery Mode
Battery Low (Need Recharge)
UPS Fault
Overload
CONNECTIONS
Communications
Output
Protection Port
REQUIREMENTS AND SOFTWARE
VI 650 SE
650VA
360W
VI 850 SE
850VA
480W
2-6 ms
Pure Sine Wave
Shortcircuit and Output Overload
12V / 7Ah
12V / 9Ah
1
4h to 90% after complete discharge
Discharge, Overcharge, Overload and Short circuit
Ports
PRODUCT DETAILS
Dimensions
Depth x Width x Height (mm)
Colour
Weight
ENVIRONMENT
Temperature
Humidity
Noise level
PACKAGE CONTENT
USB
3x IEC
RJ11, RJ45 in/out
LOGISTIC DATA
Package Dimensions
ViewPower
1x USB port
Depth x Width x Height (mm)
Weight
VI 1200
1200VA
600W
VI 2200
2200VA
1100W
170-280Vac
50/60Hz (Auto)
230Vac ±10 %
50/60Hz
Typical 4-8 ms
Modified Sine Wave
Discharge, Overcharge and Overload Protection
12V / 7Ah
12V / 9Ah
1
12V / 7Ah
6h to 90% after complete discharge
Battery Overload and Overdischarge
12V / 9Ah
2
Green LED lighting
Green LED flashing
Beep every 10 seconds
Beep every second
Continuous beep
Beep every 0,5 seconds
USB
2x Schuko
RJ11 in/out
Software
±10 %
50/60Hz
AC mode to Battery mode
Waveform (Battery Mode)
Protection
BATTERY
Type
Quantity
Recharge Time
Protection
CONNECTIONS
Communications
Output
Protection Port
REQUIREMENTS AND SOFTWARE
Software
Ports
PRODUCT DETAILS
Dimensions
Depth x Width x Height (mm)
Colour
Weight
ENVIROMENT
Temperature
Humidity
Noise level
| Series
Optional Accessories
With its high efficient digitalized
PWM-based controller PowerWalker VI PSW series provides a pure
sine wave output for best protection for sensitive equipment.
A comprehensive display allows
monitoring the power status very
easily.
V I LED
Overview Specs VI LED
2x Schuko, 2x IEC
RJ11/RJ45 in/out
WinPower
1x USB port
279 x 100 x 143
4,4kg
365 x 139 x 195
5.0kg
Black
8.6kg
10.2kg
0°C - 40°C
0 - 90% (non condensing)
< 40dB at 1 meter
PowerWalker VI
PowerWalker VI
PowerWalker VI
PowerWalker VI
1200,
2200,
650 SE,
850 SE,
Input Power cable, Input Power cable,
USB cable, Software USB cable, Software
IEC cable,
IEC cable,
CD, manual
CD, manual
USB cable, Software USB cable, Software
CD, manual
CD, manual
330 x 140 x 223
330 x 140 x 223
452 x 230 x 292
452 x 230 x 292
4,4kg
5.0kg
8.6kg
10.2kg
328 x 100 x 145
5.2kg
Black
6.0kg
0°C - 40°C
0 - 90% (non condensing)
< 40dB at 1 meter
20
21
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
Home/SMB UPS
V I LC D
Overview Specs VI LCD, SW LCD and PSW LCD
V I LCD
| Series
Line Interactive
MODEL
Power (VA)
Power (W)
INPUT
Voltage Range
Frequency Range
OUTPUT
Voltage Regulation
Frequency Regulation
Transfer Time
AC mode to Battery mode
Waveform (Battery Mode)
Protection
BATTERY
Type
Quantity
Line Interactive Pure Sine Wave
VI 650 LCD
650VA
360W
VI 850 LCD
850VA
480W
Colour
Weight
ENVIRONMENT
Temperature
Humidity
Noise level
PACKAGE CONTENT
LOGISTIC DATA
Package Dimensions
Depth x Width x Height (mm)
Weight
VI 1500 LCD
1500VA
900W
VI 2000 LCD
2000VA
1200W
VI 600 SW
600VA
360W
VI 800 SW
800VA
480W
12V / 7Ah
12V / 9Ah
VI 750 PSW
750VA
480W
162-290Vac
50/60Hz (Auto)
230Vac ±10 %
50/60Hz ±1Hz
230Vac ±10 %
50/60Hz ±1Hz
12V / 7Ah
12V / 9Ah
12V / 9Ah
12V / 7Ah
12V / 9Ah
2
1
4h to 90%
6h to 90%
after complete discharge
after complete discharge
Discharge, Overcharge, Overload and Short circuit protection
4h to 90% after complete discharge
Battery Overload and Overdischarge
AC Mode, Battery Level, Output Load Level,
Input Voltage, Output Voltage and Fault
AC Mode, Battery Level, Output Load Level,
Input Voltage, Output Voltage and Fault
Beep every 10 seconds
Beep every second
Continuous Beep
Beep every 0,5 seconds
Beep every 10 seconds
Beep every second
Continuous Beep
Beep every 0,5 seconds
Beep every 2 seconds
Beep every 2 seconds
USB
RJ11 in/out
USB
3x IEC
2x Schuko + 2x IEC
4x IEC
5,0kg
12V / 10Ah
6x IEC
RJ11/RJ45 in/out
ViewPower
1x USB port
287 x 100 x 142
VI 2000 PSW
2000VA
1400W
12V / 7Ah
12V / 9Ah
2
2x Schuko
VI 1500 PSW
1500VA
1050W
Typical 2-6 ms, 10 ms max.
Pure Sine Wave
Short circuit and overload protection
2-6 ms
1
4,3kg
VI 1000 PSW
1000VA
700W
162-290Vac
50/60Hz (Auto)
2-6 ms
Recharge Time
Depth x Width x Height (mm)
VI 1000 LCD
1000VA
600W
Modified Sinewave
Output Overload
Protection
LCD INDICATOR
AUDIO INDICATORS
Battery Mode
Battery Low (Need Recharge)
UPS Fault
Overload
Battery Fault in AC mode
(Need for replacement)
CONNECTIONS
Communications
Output
Protection Port
REQUIREMENTS AND SOFTWARE
Software
Ports
PRODUCT DETAILS
Dimensions
| Series
ViewPower
1x USB port
350 x 146 x 165
397 x 146 x 205
397 x 146 x 205
Black
8,0kg
10,7kg
12,1kg
328 x 100 x 145
5.2kg
6.0kg
0°C - 40°C
0 - 90% (non condensing)
< 40dB at 1 meter
350 x 146 x 160
6.8kg
9.0kg
397 x 146 x 205
12.2kg
13.7kg
0°C - 40°C
0 - 90% (non condensing)
< 40dB at 1 meter
PowerWalker
VI 650 LCD, CD
Software,
USB cable, User
Manual
PowerWalker
VI 850 LCD, CD
Software,
USB cable, User
Manual
PowerWalker
VI 1000 LCD, CD
Software,
USB cable, AC
cable, User
Manual
PowerWalker
VI 1500 LCD, CD
Software,
USB cable, AC
cable, User
Manual
PowerWalker
VI 2000 LCD, CD
Software,
USB cable, AC
cable, User
Manual
PowerWalker
VI 600 SW,
Input Power Cord,
IEC-Cable C13/
C14,USB Cable,
Control Software
CD, Manual
PowerWalker
VI 800 SW,
Input Power Cord,
IEC-Cable C13/
C14,USB Cable,
Control Software
CD, Manual
PowerWalker
VI 750 SW,
Input Power Cord,
IEC-Cable C13/
C14,USB Cable,
Control Software
CD, Manual
PowerWalker
VI 1000 PSW,
Input Power Cord,
IEC-Cable C13/
C14,USB Cable,
Control Software
CD, Manual
PowerWalker
VI 1500 PSW,
Input Power Cord,
IEC-Cable C13/
C14,USB Cable,
Control Software
CD, Manual
PowerWalker
VI 2000 PSW,
Input Power Cord,
IEC-Cable C13/
C14,USB Cable,
Control Software
CD, Manual
337 x 145 x 220
337 x 145 x 220
445 x 200 x 255
495 x 235 x 285
495 x 235 x 285
385 x 140 x 228
385 x 140 x 228
442 x 195 x 254
442 x 195 x 254
490 x 230 x 287
490 x 230 x 287
4,7kg
5,3kg
9,0kg
11,9kg
13,2kg
5.2kg
6.0kg
6.8kg
9.0kg
12.2kg
13.7kg
22
23
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
Hi-Power
Professional UPS
3-1 PHASE
1-1 PHASE
1000/1500/2000/3000VA
6000VA
10KVA
10KVA
20KVA
3-3 PHASE
20KVA
30KVA
40KVA
BX | Battery External
VF I T ow er
On-Line
BE | Battery Empty
V I Ra c k/To w e r
Line Interactive 1-3 KVA
V F I R a ck/To w e r
On-Line 1-10 KVA
BI | Battery Internal
VF I T ow er
On-Line
VF I Rack/T ower
1-3KVA Rack/Tower
6-10KVA Rack
Examples only, full range of accessories can be found on our website
1000/1500/2000/3000VA
6000VA
10KVA
BlueWalker GmbH
Martin-Buber-Strasse 12
41470 Neuss, germany
24
w w w . p o w e r w a l k e r. c o m
Tel. +49(0)2137-929873
[email protected]
www.powerwalker.com
25
w w w . p o w e r w a l k e r. c o m
VI Rack/Tower
Professional UPS
VI RT 1000/1500/2000/3000 & 1000E/RT
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
0.9 Output Power Factor
Rack-Tower 2-in-1 Design
Intelligent LCD Display
Green Power Function
High Frequency Topology
Pure Sinewave Output
Output THDV < 3%
Selectable Line Sensitivity
Swappable LCD Direction
Extended Run Time
Power Management Software
Multi Communication Ports
Optional SNMP and Relay Card
Self-Monitoring and Fault Diagnosis
Load Segments Control
EPO Connector
VI 2000 RT LCD
VI 3000 RT LCD
The PowerWalker VI RT LCD is a Line-Interactive UPS with pure sine wave,
microprocessor control and designed for fulfilling high quality power
protection demand. This series UPS can be used as tower or applied to
standard 19” rack, and the 2U height design facilities your whole system
planning and installation.
Optional Accessories
VI 1000 E/RT LCD
MODEL
Power
INPUT
Voltage Range
Frequency Range
OUTPUT
Voltage
Voltage Regulation (Batt. Mode)
Frequency (Battery Mode)
Waveform (Battery Mode)
BATTERY
Type
Quantity
Recharge Time
AUDIO INDICATORS
Battery Mode
Battery Low
Overload
Fault
LCD INDICATOR
VI 1000E-RT LCD
1000 VA / 900 W
CONNECTIONS
Communications
EPO (Emergency Power Off)
Output
Width x Height x Depth (mm)
VI 1000/1500RT LCD
VI 1500RT LCD
1500 VA / 1350 W
VI 2000RT LCD
2000 VA / 1800 W
VI 3000RT LCD
3000 VA / 2700 W
161-276VAC
50/60Hz ±5Hz for Normal Mode / 40-70Hz for Generator Mode
208/220/230/240Vac
±5%
50Hz or 60Hz
Pure Sine Wave
12 V / 9 Ah
2
8h to 90%
12 V / 7 Ah
3
3h to 90%
12 V / 9 Ah
12 V / 7 Ah
4h to 90%
3h to 90%
6
12 V / 9 Ah
4h to 90%
Beep every 4 seconds
Beep every second
Doble Beep every second
Continuous Beep
UPS status, Output Load Level, battery level, Input Voltage/Output, Discharger Timer and Fault
USB, RS-232 incl. dry-out contacts
Yes
4x 10A IEC
REQUIREMENTS AND SOFTWARE
Software
Ports
PRODUCT DETAILS
Dimensions
Weight
ENVIROMENT
Humidity
Temperature
VI 1000RT LCD
1000 VA / 900 W
8x 10A IEC, 1X
16A IEC
8x 10A IEC
WinPower
1x USB port or 1x Port RS-232
438 x 86.5 x 436
15.0kg
17.8kg
438 x 86.5 x 608
17.8kg
27.8kg
27.8kg
20%-80% relative humidity (non-condensing)
0ºC - 40°C
26
27
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
VFI Rack/Tower
Professional UPS
VFI RT 1-3 kVA
l
l
l
l
l
l
l
l
l
True On-Line Double Conversion Technology
Dual Format Tower / Rack 19 “
Compact design (2U up to 3000VA)
High output power factor of 0.9
IEC outputs (programmable)
ECO mode for power saving
EPO Function (Emergency Power Off)
Communication USB, RS-232 and optional SNMP
Winpower software for control and monitoring
Specially suitable for:
- Data Processing Centers (DPC)
- Computer Systems for Small Business / Servers
- Industrial Applications
- Financial Systems
- Medical Centers
VFI 3000 RT LCD
MODEL
Power
INPUT
Voltage Range
Frequency Range
Phase
Power Factor
OUTPUT
Voltage
Frequency
VFI 1000RT LCD
1000 VA / 900 W
50Hz / 60Hz ± 0.2Hz
3:1
< 2 % THD (linear load)
Zero
AC mode to Battery mode
Transfer Time
Zero
Inverter to Bypass
Waveform
Pure Sine Wave
(Battery Mode)
VFI 1000/1500/2000 RT LCD
CONNECTIONS
Communications
EPO (Emergency Power Off)
Output
REQUIREMENTS AND SOFTWARE
Software
Ports
PRODUCT DETAILS
Dimensions
Depth x Width x Height (mm)
Weight
ENVIROMENT
Humidity
Temperature
VFI 3000RT LCD
3000 VA / 2700 W
208/220/230/240Vac ± 1%
Current Crest Ratio
Total Harmonic Distorsion
Transfer Time
BATTERY
Type
Quantity
Recharge Time
AUDIO INDICATORS
Battery Mode
Battery Low
Overload
Fault
LCD INDICATOR
VFI 2000RT LCD
2000 VA / 1800 W
120-276VAC
45-66Hz
Single phase with ground
≥ 0.99 (100% load)
(Battery Mode)
Optional Accessories
VFI 1500RT LCD
1500 VA / 1350 W
12 V / 7 Ah
3
12 V / 7 Ah
4
3h to 90%
12 V / 9 Ah
4
12 V / 9 Ah
6
Beep every 4 seconds
Beep every second
Doble Beep every second
Continuous Beep
UPS status, Output Load Level, battery level, Input Voltage/Output,
Discharger Timer and Fault
USB and RS-232 ports
Yes
8x 10A IEC
8x 10A IEC, 1X 16A IEC
WinPower
1x USB port or 1x Port RS-232
438 x 86,5 x 436
438 x 86,5 x 436
438 x 86,5 x 436
438 x 86,5 x 608
16,5kg
19,7kg
20,5kg
28,5kg
<95% (non condensing)
0ºC - 45°C
28
29
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
Professional UPS
VFI Rack/Tower
Hi-Power
VFI Series 6000/10000 VA
l
l
l
l
l
l
l
l
l
l
ON-LINE Technology
True On-Line Double Conversion Technology
Dual Format Tower / Rack 19 “
Compact design, 3U (6KVA) / 5U(10KVA)
High output power factor of 0.9
IEC outputs (programmable) + block terminals
ECO mode for power saving
EPO Function (Emergency Power Off)
Communication USB, RS-232 and optional SNMP
Winpower software for control and monitoring
Integrated Manual Bypass Switch
Specially suitable for:
- Data Processing Centers (DPC)
- Computer Systems for Small Business / Servers
- Industrial Applications
- Financial Systems
- Medical Centers
VFI 10000RT LCD
MODEL
Power
INPUT
Voltage Range
Frequency Range
Phase
Power Factor
OUTPUT
Voltage
Frequency
VFI 6000RT LCD
6000 VA / 5400 W
VFI 10000RT LCD
10000 VA / 9000 W
120-276 Vac
45-66Hz
Single phase with ground
≥ 0.99 (100% carga)
208/220/230/240Vac ± 1%
50Hz / 60Hz ± 0.2Hz
(Battery Mode)
Current Crest Ratio
Total Harmonic Distorsion
Transfer Time
Optional Accessories
3:1
< 2 % THD (linear load)
Zero
AC mode to Battery mode
Transfer Time
Zero
Inverter to Bypass
Transfer Time
1ms
Transfer Time
<10ms
Inverter to ECO Mode
ECO Mode to Inverter
Waveform
Pure Sine Wave
(Battery Mode)
BATTERY
Type
Quantity
Recharge Time
AUDIO INDICATORS
Battery Mode
Battery Low
Overload
Fault
LCD INDICATOR
CONNECTIONS
Communications
EPO (Emergency Power Off)
Output
REQUIREMENTS AND SOFTWARE
Software
Ports
PRODUCT DETAILS
Dimensions
Depth x Width x Height (mm)
VFI 6000 RT LCD
(Tower Installation)
VFI 6000RT LCD
(19” Rack Installation)
Weight
ENVIROMENT
Humidity
Temperature
Noise level
12V / 5Ah
15
3h to 90% after complete discharge
12V / 9Ah
20
Beep every 4 seconds
Beep every second
Doble Beep every second
Continuous Beep
UPS status, Output Load Level, battery level, Input Voltage/Output,
Discharger Timer and Fault
4x 10A IEC, 2X 16A IEC
USB and RS-232 ports
Yes
8X 16A IEC
WinPower
1x USB port or 1x Port RS-232
438 x 129 x 594
438 x 215,5 x 594
46,0kg
82,5kg
<95% (non condensing)
0ºC - 40°C
< 45dB at 1 meter
<95% (non condensing)
0ºC - 40°C
< 45dB at 1 meter
30
31
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
VFI Tower
Professional UPS
VFI Tower Series 1000/1500/2000/3000 VA
ON-LINE Technology
VFI 1000/1500/2000/3000 LCD
(SNMP Card Optional)
MODEL
Power
INPUT
Low Line Transfer (% Load)
Voltage below which the UPS switches to battery mode
VFI 1000 LCD
1000VA / 800W
VFI 1500 LCD
1500VA / 1200W
175 Vac ± 5%
High Line Transfer
300 Vac ± 5%
High Line Comeback
290 Vac ± 5%
Voltage above which the UPS switches to battery mode
True On-Line Double Conversion Technology
Programmable Output Voltage and Frequency
High Power output Factor 0.8
LCD Panel with detailed information
4/6/8 IEC type outlets (2/3/4 programmable)
Terminal Out (VFI 3000 LCD only)
ECO mode for power saving
EPO Function (Emergency Power Off)
Communication USB, RS-232 and optional SNMP
ViewPower software (controlling & monitoring)
Voltage below which the UPS switches to AC mode
Optional Accessories
Frequency Range
Phase
Power Factor
OUTPUT
Output Voltage (Configurable)
Voltage Regulation AC
Frequency Range (Configurable)
(Frequency Converter Mode)
Frequency Range (Battery Mode)
Current Crest Ratio
Total Harmonic Distortion
Transfer Time
40Hz ~ 70Hz
Single phase with ground
≥ 0.99 @ 220~230 Vac
208/220/230/240Vac
± 3%
50Hz / 60Hz
50Hz ± 0.25Hz or 60Hz ± 0.3Hz
3:1
≤ 3 % THD (linear load) / ≤ 6 % THD
≤ 4 % THD (linear load) / ≤ 7 % THD
(non-linear load)
(non-linear load)
Zero
AC mode to Battery mode
Transfer Time
4 ms (Typical)
Inverter-Bypass
PowerWalker VFI series with true On-Line Double
Conversion technology always provides clean
electric power thereby protecting the connected
equipment from all power supply problems.
VFI series of PowerWalker is built with true
double conversion technology, where in the first
phase of conversion, the AC power at the UPS
input is converted to DC. Then in the second
phase, the DC electricity is converted back to AC
power. In this way, the load connected to the
UPS output is isolated from the electrical input
current and its imperfections. The result is an
always clean and stable output power.
Another advantage of this technology is its
“zero” transfer time in case of total power
failure at the entrance. In addition, the VFI Series
of PowerWalker provides more reliable voltage
regulation, its tolerance range is between 1%
and 3% of the rated voltage.
VFI series of PowerWalker features a USB and
a Serial (RS-232) port allowing the unit to be
connected to a large number of operating
systems for configuration and monitoring of the
unit.
This type of UPS is specially designed for all
professional applications. Moreover, thanks to its
true double conversion technology VFI series of
PowerWalker can be used in critical applications
with high requirements for stability in the
electrical supply. Especially suitable for Industrial
Applications, Data Processing Center (DPC),
Cloud Computing, Financial Services, Medical
Centers, Critical Applications in general, etc..
Waveform (Battery Mode)
BATTERY
Type
Quantity
Recharge Time
Charging Current
Charging Voltage
CONNECTIONS
Communications
EPO (Emergency Power Off)
Output
Protection Port
WAGO
REQUIREMENTS AND SOFTWARE
Software
Ports
PRODUCT DETAILS
Dimensions
Depth x Width x Height (mm)
Weight
ENVIRONMENT
Temperature
Humidity
Noise level
VFI 3000 LCD
3000 VA / 2400 W
160Vac (100%-80%) / 140Vac (80%-70%) | 120Vac (70%-60%) / 110Vac (60%-0%)
Low Line Comeback
Voltage above which the UPS switches to AC mode
l
l
l
l
l
l
l
l
l
l
VFI 2000 LCD
2000 VA / 1600 W
Pure Sine Wave
12 V / 7 Ah
3
12 V / 9 Ah
12 V / 7 Ah
4h to 90%
1.0 A (max.)
41.0 Vdc ± 1%
6
82.0 Vdc ± 1%
USB and RS-232 ports
Yes
8x IEC
4x IEC
(2 programmable output)
-
12 V / 9 Ah
(4 programmable output)
RJ11/RJ45 in/out
6x IEC (3 prog.)
+ Terminal Output
Yes
ViewPower
1x USB port or 1x Port RS-232
397 x 145 x 221
13.6kg
14.6kg
421 x 190 x 318
26.5kg
29.5kg
20 - 90% (non condensing)
0°C - 40°C
20 - 90% (non
0°C - 40°C
20 - 90% (non
< 45dB at 1 meter
< 45dB at 1 meter
< 45dB at 1 meter
0°C - 40°C
condensing)
condensing)
32
33
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
Professional UPS
VFI Tower
Hi-Power
VFI Series 6000/10000 C
ON-LINE Technology
VFI Series 6000/10000 C
PowerWalker VFI series with true OnLine Double Conversion technology
always provides clean electric power
thereby protecting the connected
equipment from all power supply
problems.
VFI series of PowerWalker is built with
true double conversion technology,
where in the first phase of conversion,
the AC power at the UPS input is
converted to DC. Then in the second
phase, the DC electricity is converted
back to AC power. In this way, the
load connected to the UPS output
is isolated from the electrical input
current and its imperfections. The
result is an always clean and stable
output power.
PowerWalker VFI series features a USB
port and one Serial (RS-232) allowing
the unit to be connected to a large
number of operating systems for
configuration and monitoring of the
unit.
MODEL
Power
INPUT
Low Line Transfer (% Load)
Voltage below which the UPS switches to battery mode
This type of UPS is specially designed
for all professional applications.
Especially recommended for critical
applications and high power CPD,
industrial, financial services, medical
centers, etc
Low Line Comeback
Voltage above which the UPS switches to AC mode
True On-Line Double Conversion Technology
Programmable Output Voltage and Frequency
High Power output Factor 0.8
LCD Panel with detailed information
1x Terminal block outputs
ECO mode for power saving
EPO Function (Emergency Power Off)
Communication USB, RS-232 and optional SNMP
ViewPower software (controlling & monitoring)
Voltage Low Line Loss + 10V
300 Vac ± 5%
Voltage above which the UPS switches to battery mode
High Line Comeback
Voltage below which the UPS switches to AC mode
Frequency Range
Phase
Power Factor
OUTPUT
Output Voltage (Configurable)
Voltage Regulation AC
Frequency Range (Configurable)
optional accessories
Frequency Range (Battery Mode)
Current Crest Ratio
Total Harmonic Distorsion
Transfer Time AC mode to Battery mode
Transfer Time Inverter-Bypass
Waveform (Battery Mode)
BATTERY
Type (units.)
Recharge Time
Charging Current
Charging Voltage
CONNECTIONS
Communications
EPO (Emergency Power Off)
Output
REQUIREMENTS AND SOFTWARE
Software
Ports
PRODUCT DETAILS
Dimensions Depth x Width x Height (mm)
Weight
VFI 10000C LCD
10000 VA / 8000 W
110 Vac ± 3% (50%) / 176 Vac ± 3% (100%)
High Line Transfer
Frequency Converter Mode
l
l
l
l
l
l
l
l
l
VFI 6000C LCD
6000 VA / 4800 W
Voltage High Line Loss - 10V
46Hz ~ 54Hz (50Hz) / 56Hz ~ 64Hz (60Hz)
Single phase with ground
≥ 0.99 @ 100% Load
208/220/230/240Vac
± 1%
50Hz / 60Hz
50Hz ± 0,1Hz or 60Hz ± 0,1Hz
3:1
≤ 3 % THD (linear load) / ≤ 6 % THD (non-linear load)
Zero
Zero
Pure Sine Wave
12 V / 9 Ah (16 Pcs.)
12 V / 9 Ah (20 Pcs.)
9h -> 90%
9h -> 90%
Default 1.0 A ± 10%, Max. 2.0 A ±10%
218.4 Vdc ± 1%
273.0 Vdc ± 1%
USB and RS-232 ports + Intelligent Slot
Yes
1x Output Terminals
ViewPower
1x USB port or 1x Port RS-232
369 x 190 x 688
72,0kg
442 x 190 x 688
82,0kg
34
35
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
VFI Tower
Professional UPS
VFI Tower
MODEL
Power
INPUT
Low Line Transfer (% Load)
Voltage below which the UPS switches to battery mode
Low Line Comeback
VFI 1000 LCD
1000 VA / 800 W
VFI 1500 LCD
1500 VA / 1200 W
160 Vac / 140 Vac / 120 Vac / 110 Vac ± 5 %
(Carga al 100% - 80 % / 80 % - 70 % / 70 - 60 % / 60 % - 0)
Voltage above which the UPS switches to AC mode
175 Vac ± 5 %
High Line Transfer
Voltage above which the UPS switches to battery mode
300 Vac ± 5 %
High Line Comeback
Voltage below which the UPS switches to AC mode
290 Vac ± 5 %
Frequency Range
Phase
Power Factor
OUTPUT
Output Voltage (Configurable)
Voltage Regulation AC
Frequency Range(Configurable)
50Hz / 60Hz
AC mode to Battery mode
Transfer Time
Overload
BATTERY
Type
Recharge Time
Charging Current
Charging Voltage
AUDIO INDICATORS
Battery Mode
Battery Low
Overload
Fault
LCD INDICATOR
CONNECTIONS
Communications
EPO (Emergency Power Off)
Output
Protection Port
REQUIREMENTS AND SOFTWARE
Software
Ports
PRODUCT DETAILS
Dimensions
Depth x Width x Height (mm)
Weight
ENVIROMENT
Humidity
Temperature
Noise level
MANAGEMENT
RS-232 or USB
SNMP (Option)
CONTENTS
LOGISTIC DATA
Package Dimensions
Depth x Width x Height (mm)
Weight
Pure Sine Wave
100%-110%: audible warning
110%-130%: UPS shuts down in 30 seconds at battery mode or transfers to bypass mode
when the utility is normal.
>130%: UPS shuts down immediately at battery mode or transfer to bypass mode when
the utility is normal.
12 V / 7 Ah (3 Pcs.)
12 V / 9 Ah (3 Pcs.)
4h to 90%
1.0 A (max.)
41.0 Vdc ± 1%
12 V / 7 Ah (6 Pcs.)
82.1 Vdc ±1%
Beep every 4 seconds
Beep every second
Doble Beep every second
Continuous Beep
UPS status, Output Load Level, battery level, Input Voltage/Output,
Discharger Timer and Fault
USB and RS-232 ports
Yes
4x IEC
(2 programmable output)
RJ11/RJ45 (in/out)
Voltage above which the UPS switches to AC mode
Voltage Low Line Loss + 10V
High Line Transfer
Voltage above which the UPS switches to battery mode
300 Vac ± 5 %
300 Vac ± 5%
High Line Comeback
Voltage below which the UPS switches to AC mode
290 Vac ± 5 %
Voltage High Line Loss - 10V
40Hz ~ 70Hz
Single phase with ground
≥ 0.99 @ 220~230 Vac
46Hz ~ 54Hz (50Hz) / 56Hz ~ 64Hz (60Hz)
Single phase with ground
208/220/230/240Vac
± 3%
208/220/230/240Vac
± 1%
Total Harmonic Distortion
4 ms (Typical)
8x IEC
(4 programmable output)
ViewPower
1x USB port or 1x Port RS-232
397 x 145 x 221
397 x 145 x 221
421 x 190 x 318
13,6kg
14,6kg
26,5kg
20-90 % (non condensing)
0ºC - 40°C
< 45dBA at 1 meter
Windows® 98/2000/2003/XP/Vista/2008, Windows® 7, Linux, Unix and MAC
Remote UPS management by SNMP card via web application
PowerWalker VFI 1000 LCD,
CD Software, USB cable, 2x IEC
cable, AC cable, User Manual
PowerWalker VFI 1500 LCD,
CD Software, USB cable, 2x IEC
cable, AC cable, User Manual
PowerWalker VFI 2000 LCD,
CD Software, USB cable, 2x IEC
cable, AC cable, User Manual
470 x 325 x 235
470 x 325 x 235
397 x 145 x 220
15,1kg
16,1kg
27,0kg
VFI 10000 LCD
10000 VA / 8000 W
110 Vac ± 3 % (50% Load) or
176 Vac ± 3 % (100% Load)
Current Crest Ratio
Zero
VFI 6000 LCD
6000 VA / 4800W
175 Vac ± 5 %
Frequency Converter Mode
Frequency Range (Battery Mode)
50Hz ± 0.25Hz or 60Hz ± 0.3Hz
3:1
≤ 3 % THD (linear load) / ≤ 6 % THD (non-linear load)
VFI 3000 LCD
3000 VA / 2400 W
160Vac/140Vac/120Vac/110Vac±5%
(Load 100-80% / 80-70% / 70-60% / 60-0%)
Voltage below which the UPS switches to battery mode
Frequency Range
Phase
Power Factor
OUTPUT
Output Voltage (Configurable)
Voltage Regulation AC
Frequency Range(Configurable)
208/220/230/240Vac
± 3%
Current Crest Ratio
Total Total Harmonic Distortion
Transfer Time
MODEL
Power
INPUT
Low Line Transfer (% Load)
Low Line Comeback
40Hz ~ 70Hz
Single phase with ground
≥ 0.99 @ 220~230 Vac
Frequency Converter Mode
Frequency Range (Battery Mode)
Inverter-Bypass
Waveform (Battery Mode)
VFI 2000 LCD
2000 VA / 1600 W
Hi-Power
Hi-Power
VFI Series 1000/1500/2000/3000/6000/10000 VA (Tower)
Transfer Time. AC mode to Battery mode
Transfer Time. Inverter-Bypass
Waveform (Battery Mode)
Overload
BATTERY
Type (units.)
Recharge Time
Charging Current
Charging Voltage
AUDIO INDICATORS
Battery Mode
Battery Low
Overload
Fault
LCD INDICATOR
CONNECTIONS
Communications
EPO (Emergency Power Off)
Output
Protection Port
REQUIREMENTS AND SOFTWARE
Software
Ports
PRODUCT DETAILS
Dimensions
Depth x Width x Height (mm)
Weight
ENVIRONMENT
Humidity
Temperature
Noise level
MANAGEMENT
RS-232 or USB
SNMP (Option)
CONTENTS
LOGISTIC DATA
Package Dimensions
Depth x Width x Height (mm)
Weight
≥ 0.99 @ 100% Load
50Hz / 60Hz
50Hz / 60Hz
50Hz ± 0.25Hz or 60Hz ± 0.3Hz
3:1
≤ 4 % THD (linear load) /
≤ 7 % THD (non-linear load)
50Hz ± 0.1Hz or 60Hz ± 0.1Hz
3:1
≤ 3 % THD (linear load) /
≤ 6 % THD (non-linear load)
100% -110%: audible warning
110% -130% UPS shuts down in 30 seconds at
battery mode or transfers to bypass mode
when the utility is normal.
> 130%: UPS shuts down immediately at battery mode or transfer to bypass mode when
the utility is normal.
12 V / 9 Ah (6 Pcs.)
4h to 90%
1.0 A (max.)
82.0 Vdc ± 1%
Zero
Zero
Pure Sine Wave
100%-110%:10 min (AC mode)
110%-130%:1 min (AC mode)
>130%: 1 Sec. (AC mode)
12 V / 9 Ah (16 Pcs.)
9 h -> 90%
12 V / 9 Ah (20 Pcs.)
9h -> 90%
Default 1.0 A ± 10%, Max. 2.0 A ±10%
218.4 Vdc ± 1%
273.0 Vdc ± 1%
Beep every 4 seconds
Beep every second
Doble Beep every second
Continuous Beep
UPS status, Output Load Level, battery level, Input Voltage/Output,
Discharger Timer and Fault
USB and RS-232 ports + Intelligent Slot
Yes
6x IEC
1x Output Terminals
(3 programmable output)
RJ-11 (in/out)
ViewPower
1x USB port or 1x Port RS-232
421 x 190 x 318
369 x 190 x 688
442 x 190 x 688
29,5kg
72.0kg
82.0kg
< 45dBA at 1 meter
20-90 % (non condensing)
0ºC - 40°C
< 55dB at 1 meter
< 58dB at 1 meter
Windows® 98/2000/2003/XP/Vista/2008, Windows® 7, Linux, Unix and MAC
Remote UPS management by SNMP card via web application
PowerWalker VFI 3000 LCD, CD
Software, USB cable, 2x IEC cable,
AC cable, User Manual
PowerWalker VFI 6000
LCD, CD Software, USB
cable, User Manual
PowerWalker VFI 10000 LCD,
CD Software, USB cable,
User Manual
555 x 325 x 465
690 x 370 x 690
690 x 370 x 690
35,1kg
88,0kg
90,0kg
36
37
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
VFI Tower
Professional UPS
VFI 1000/2000/3000T LCD
VFI 1000T
l
l
l
l
l
l
l
l
l
l
True On-Line Double Conversion Technology
Programmable Output Voltage and Frequency
High Power output Factor 0.8
LCD Panel with detailed information
3x IEC / 6x IEC / 4x IEC Output (1000/2000/3000VA)
Terminal block Output (only 3000VA model)
ECO mode for power saving
EPO Function (Emergency Power Off)
Communication USB, RS-232 and optional SNMP
WinPower software (controlling & monitoring)
VFI 2000T
Optional Accessories
MODEL
Power
INPUT
Low Line Transfer (% Load)
VFI 1000T LCD
1000 VA / 800 W
VFI series of PowerWalker is built with true double
conversion technology, where in the first phase
of conversion, the AC power at the UPS input is
converted to DC. Then in the second phase, the
DC electricity is converted back to AC power. In
this way, the load connected to the UPS output is
isolated from the electrical input current and its
imperfections. The result is an always clean and
stable output power.
Another advantage of this technology is its “zero”
transfer time in case of total power failure at the
entrance. In addition, the VFI Series of PowerWalker
provides more reliable voltage regulation, its
tolerance range is between 1% and 3% of the rated
voltage.
VFI series of PowerWalker features a USB and
a Serial (RS-232) port allowing the unit to be
connected to a large number of operating systems
for configuration and monitoring of the unit.
This type of UPS is specially designed for all
professional applications. Moreover, thanks to its
true double conversion technology VFI series of
PowerWalker can be used in critical applications
with high requirements for stability in the
electrical supply. Especially suitable for Industrial
Applications, Data Processing Center (DPC), Cloud
Computing, Financial Services, Medical Centers,
Critical Applications in general, etc..
VFI 2000T LCD
2000 VA / 1600 W
VFI 3000T LCD
3000 VA / 2400 W
Voltage below which the UPS switches to battery mode
176/165/110VAC ± 3% @ 100-75%/75-50%/60-0% load
Voltage above which the UPS switches to AC mode
186/175/120VAC ±3% @ 100-75%/75-50%/60-0% load
Low Line Comeback
Voltage above which the UPS switches to battery mode
High Line Transfer
300VAC ± 3%
Voltage below which the UPS switches to AC mode
High Line Comeback
290 Vac ± 5 %
Frequency Range
Phase
Power Factor
OUTPUT
Output Voltage (Configurable)
Voltage Regulation AC
Frequency Range(Configurable)
45Hz ~ 66Hz
Single phase with ground
≥ 0.99
208/220/230/240Vac
± 2%
45 ~ 55Hz or 54 ~ 66Hz
Frequency Converter Mode
PowerWalker VFI series with true On-Line Double
Conversion technology always provides clean
electric power thereby protecting the connected
equipment from all power supply problems.
VFI 3000T
Frequency Range (Battery Mode)
Current Crest Ratio
Total Total Harmonic Distortion
Transfer Time
50/60Hz ± 0.2Hz
3:1
≤ 3 % THD (linear load) / ≤ 6 % THD (non-linear load)
Zero
AC mode to Battery mode
Transfer Time
<4 ms (Typical)
Inverter-Bypass
Waveform (Battery Mode)
BATTERY
Type
Recharge Time
CONNECTIONS
Communications
EPO (Emergency Power Off)
Output
REQUIREMENTS AND SOFTWARE
Software
Ports
PRODUCT DETAILS
Dimensions
Depth x Width x Height (mm)
Weight
Fan Control
ENVIROMENT
Humidity
Temperature
Noise level
Pure Sine Wave
12 V / 7 Ah (3 Pcs.)
3x IEC
12 V / 7 Ah (8 Pcs.)
5h to 90%
USB
Yes
6x IEC
12 V / 7 Ah (8 Pcs.)
4x IEC, 1x Terminal
ViewPower
1x USB port
400 x 145 x 220
460 x 192 x 347
460 x 192 x 347
13kg
31kg
Always on, automatic speed control
31kg
20-90 % (non condensing)
0ºC - 45°C
< 50dB at 1 meter
38
39
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
Professional UPS
VFI Tower
Hi-Power
VFI 6000/10000T
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
VFI 6000/10000T LCD
True double-conversion with pure sine wave output
Output power factor 0.9
Parallel System configuration / parallel Redundancy
Monitoring software included
Wide input voltage range (110-276 VAC)
Input power factor correction
Input THDi <5%, Output THDv <2% @ linear load
and <5% @ non-linear load
50/60 Hz frequency converter mode
ECO mode operation for energy saving
Emergency power off (EPO) function
Intelligent fan control for reduced noise level
N+X Parallel Redundancy for up to 4 UPS of same size
Smart battery charger to extend battery life
Integrated maintenance bypass switch
Optional: SNMP module, Battery Pack, Modbus card,
Remote panel, AS/400 card
MODEL
Power
INPUT
Voltage Range (based on voltage range)
Frequency Range
Power Factor
OUTPUT
Voltage
Frequency (Synchronized Range)
Frequency (Battery Mode)
Current Crest Ratio
Total Harmonic Distorsion
Transfer Time AC mode to Battery
mode
Transfer Time Inverter-Bypass
Waveform (Battery Mode)
BATTERY
Type (units.)
Recharge Time
CONNECTIONS
Communications
EPO (Emergency Power Off)
Output
REQUIREMENTS AND SOFTWARE
Software
Ports
PRODUCT DETAILS
Dimensions Depth x Width x Height
(mm)
Weight
Fan Control
ENVIROMENT
Humidity
Temperature
Noise level
PowerWalker VFI series with true On-Line
Double Conversion technology always
provides clean electric power thereby
protecting the connected equipment
from all power supply problems.
VFI series of PowerWalker is built with
true double conversion technology,
where in the first phase of conversion, the
AC power at the UPS input is converted
to DC. Then in the second phase, the DC
electricity is converted back to AC power.
In this way, the load connected to the
UPS output is isolated from the electrical
input current and its imperfections.
The result is an always clean and stable
output power.
Parallel configuration option allows you
to connect up to 4 devices in parallel
thus reaching a total capacity of 40KVA.
Redundant configuration with 2 units
ensures the electrical supply even one of
the two UPS fails.
PowerWalker VFI series features a USB
port and one Serial (RS-232) allowing the
unit to be connected to a large number
of operating systems for configuration
and monitoring of the unit.
VFI 6000T LCD
6000 VA / 5400 W
VFI 10000T LCD
10000 VA / 9000 W
110-276VAC
45-55Hz/54-66Hz
≥ 0.99 @ 100% Load
208/220/230/240Vac ± 1%
45-55Hz/54-66Hz
50/60Hz ± 0.05
3:1
≤ 2% (Full Linear Load) ≤ 5% (Full Non Linear Load)
Zero
Zero
Pure Sine Wave
12 V / 7.2 Ah (20 Pcs.)
5h -> 90%
12 V / 9 Ah (20 Pcs.)
5h -> 90%
USB, RS-232 & Dry Contacts
Yes
Terminal outlet
WinPower
1x USB port or 1x Port RS-232
550 x 260 x 708
80kg
84kg
Always on, automatic speed control
20-90 % (non condensing)
0ºC - 45°C
< 50dB at 1 meter
This type of UPS is specially designed for
all professional applications. Especially
recommended for critical applications
and high power CPD, industrial, financial
services, medical centers, etc
VFI 6000T
40
w w w . p o w e r w a l k e r. c o m
VFI 10000T
41
w w w . p o w e r w a l k e r. c o m
Professional UPS
VFI Series 1000/1500/2000/3000/6000/10000 VA (Tower)
MODEL
Power
INPUT
Low Line Transfer (% Load)
VFI 1000T LCD
1000 VA / 800 W
VFI 2000T LCD
2000 VA / 1600 W
VFI 3000T LCD
3000 VA / 2400 W
Voltage below which the UPS switches to battery mode
176/165/110VAC ± 3% @ 100-75%/75-50%/60-0% load
Voltage above which the UPS switches to AC mode
186/175/120VAC ±3% @ 100-75%/75-50%/60-0% load
Low Line Comeback
High Line Transfer
Voltage above which the UPS switches to battery mode
300VAC ± 3%
High Line Comeback
Voltage below which the UPS switches to AC mode
290VAC ± 3%
Frequency Range
Phase
Power Factor
OUTPUT
Output Voltage
Voltage Regulation AC
Frequency Range
45Hz ~ 66Hz
Single phase with ground
≥ 0.99
220/230/240 VAC
± 2%
45 ~ 55Hz or 54 ~ 66Hz
Frequency Converter Mode
Frequency Range (Battery Mode)
50/60Hz ± 0.2Hz
3:1
≤ 3 % THD (linear load) / ≤ 5 % THD (non-linear load)
Current Crest Ratio
Total Total Harmonic Distortion
Transfer Time
Zero
AC mode to Battery mode
Transfer Time
<4 ms (Typical)
Inverter-Bypass
Waveform (Battery Mode)
BATTERY
Type
Recharge Time
Charging Current
AUDIO INDICATORS
Battery Mode
Battery Low
Overload
Fault
LCD INDICATOR
CONNECTIONS
Communications
Output
EPO (Emergency Power Off)
Intelligent Slot
Ext. Bat. connector
REQUIREMENTS AND SOFTWARE
Software
Ports
PRODUCT DETAILS
Dimensions
Depth x Width x Height (mm)
Weight
ENVIROMENT
Humidity
Temperature
Noise level
MANAGEMENT
USB
Options
CONTENTS
LOGISTIC DATA
Package Dimensions
Depth x Width x Height (mm)
Weight
Pure Sine Wave
12 V / 7 Ah (3 Pcs.)
12 V / 7 Ah (8 Pcs.)
5h to 90%
1.0 A (max.)
12 V / 9 Ah (6 Pcs.)
Beep every 4 seconds
Beep every second
Doble Beep every second
Continuous Beep
UPS status, Output Load Level, battery level, Input Voltage/Output, Discharger Timer and
Fault
3x IEC
USB
6x IEC
Yes
Yes
Yes
4x IEC + Terminal
WinPower
1x USB port
400 x 145 x 220
460 x 192 x 347
421 x 190 x 318
13kg
31kg
31kg
20-90 % (non condensing)
0ºC - 45°C
< 50dB at 1 meter
Windows® 98/2000/2003/XP/Vista/2008, Windows® 7, Linux, Unix and MAC
SNMP/NMC Card, Battery Pack, Modbus card, AS/400 card, ATS, MBS
PowerWalker VFI 1000T LCD,
Power cord, 2x IEC cable, USB
cable, Software CD, manual
PowerWalker VFI 2000T LCD,
Power cord, 2x IEC cable, USB
cable, Software CD, manual
PowerWalker VFI 3000T LCD,
Power cord, 2x IEC cable, USB
cable, Software CD, manual
MODEL
Power
INPUT
Voltage Range (based on voltage range)
Frequency Range
Power Factor
OUTPUT
Voltage
Frequency (Synchronized Range)
Frequency (Battery Mode)
Current Crest Ratio
Total Harmonic Distorsion
Transfer Time AC mode to Battery
mode
Transfer Time Inverter-Bypass
Waveform (Battery Mode)
BATTERY
Type (units.)
Recharge Time
AUDIO INDICATORS
Battery Mode
Battery Low
Overload
Fault
LCD INDICATOR
CONNECTIONS
Communications
EPO (Emergency Power Off)
Output
Intelligent Slot
Ext. Bat. connector
REQUIREMENTS AND SOFTWARE
Software
Ports
PRODUCT DETAILS
Dimensions
Depth x Width x Height (mm)
Weight
ENVIROMENT
Humidity
Temperature
Noise level
MANAGEMENT
USB
Options
CONTENTS
LOGISTIC DATA
Package Dimensions
Depth x Width x Height (mm)
Weight
VFI 6000T LCD
6000 VA / 5400 W
VFI 10000T LCD
10000 VA / 9000 W
110-276VAC
45-55Hz/54-66Hz
≥ 0.99 @ 100% Load
208/220/230/240Vac ± 1%
45-55Hz/54-66Hz
50/60Hz ± 0.05
3:1
≤ 2% (Full Linear Load) ≤ 5% (Full Non Linear Load)
Zero
Zero
Pure Sine Wave
12 V / 7.2 Ah (20 Pcs.)
5h -> 90%
12 V / 9 Ah (20 Pcs.)
5h -> 90%
Beep every 4 seconds
Beep every second
Doble Beep every second
Continuous Beep
UPS status, Output Load Level, battery level, Input Voltage/Output,
Discharger Timer and Fault
USB, RS-232 & Dry Contacts
Yes
Terminal outlet
Yes
Yes
WinPower
1x USB port or 1x Port RS-232
550 x 260 x 708
80kg
84kg
20-90 % (non condensing)
0ºC - 45°C
< 50dB at 1 meter
Windows® 98/2000/2003/XP/Vista/2008, Windows® 7, Linux, Unix and MAC
SNMP/NMC Card, Battery Pack, Modbus card, AS/400 card, ATS, MBS
PowerWalker VFI 6000T LCD, EPO
plug, USB cable, RS-232 cable, Software CD, manual
PowerWalker VFI 10000T LCD, EPO
plug, USB cable, RS-232 cable, Software CD, manual
720 x 428 x 970
89kg
89kg
560 x 320 x 460
15.0kg
33.0kg
33.0kg
42
43
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
VFI Rack
Professional UPS
VFI 1000/1500/2000/3000 RM
VFI 1000/1500/2000/3000 RM
l
l
l
l
l
l
l
l
l
l
l
True On-Line Double Conversion Technology
Programmable Output Voltage and Frequency
High Power output Factor 0.8
LCD Panel with detailed information
8 IEC C13 type outlets (4 programmable) (1000/1500VA)
6 IEC C13 + 1 IEC C19 outlets (3 programmable) (2/3 kVA)
Hot Swappable Battery Design
Optional Accessories
ECO mode for power saving
EPO Function (Emergency Power Off)
Communication USB, RS-232 and optional SNMP
ViewPower software (controlling & monitoring)
MODEL
Power
INPUT
Low Line Transfer (% Load)
VFI 1000RM
LCD
1000VA / 800W
VFI 1500RM
VFI 2000RM
VFI 3000RM
LCD
LCD
LCD
1500VA / 1200W 2000VA / 1600W 3000VA / 2400W
160/140/120/110VAC ± 5%
Voltage below which the UPS switches to battery mode
Low Line Comeback
170/150/130/120VAC ±5%
Voltage above which the UPS switches to AC mode
High Line Transfer
300 Vac ± 5%
Voltage above which the UPS switches to battery mode
High Line Comeback
290 Vac ± 5%
Voltage below which the UPS switches to AC mode
VFI 2000RM / VFI 3000RM
Frequency Range
Phase
Power Factor
OUTPUT
Output Voltage (Configurable)
Voltage Regulation AC
Frequency Range (Configurable)
(Frequency Converter Mode)
Frequency Range (Battery Mode)
Current Crest Ratio
Total Harmonic Distortion
Transfer Time
45Hz ~ 55Hz or 56Hz ~ 65Hz
Single phase with ground
≥ 0.99 @ 220-230 VAC
208/220/230/240Vac
±1%
48 ~ 52Hz or 58 ~ 62Hz
50Hz ± 0.2Hz or 60Hz ± 0.2Hz
3:1
≤ 2% THD (Linear Load) 8% max. (Batt. Mode before shut down)
Zero
AC mode to Battery mode
Transfer Time
4 ms (Typical)
Inverter-Bypass
VFI 1000RM / VFI 1500RM
PowerWalker VFI Rack series with true On-Line
Double Conversion technology always provides
clean electric power thereby protecting the
connected equipment from all power supply
problems.
VFI series of PowerWalker is built with true double
conversion technology, where in a first phase of
conversion, the AC power at the UPS input becomes
DC. Then in a second phase, the DC electricity is
re-convertes to AC power. In this way, the load
connected to the UPS output is isolated from the
electrical input current and its imperfections. The
result is an always clean and stable output power.
Another advantage of this technology is its “zero”
transfer time in case of total power failure at
the entrance. In addition, the VFI Rack Series
of PowerWalker provides more reliable voltage
regulation, its tolerance range is between 1% and
3% of the rated voltage.
VFI Rack series of PowerWalker features a USB
and a Serial (RS-232) port allowing the unit to be
connected to a large number of operating systems
for configuration and monitoring of the unit.
This type of UPS is specially designed for all
professional applications. Moreover, thanks to its
true double conversion technology VFI Rack series
of PowerWalker can be used in critical applications
with high requirements for stability in the
electrical supply. Especially suitable for Industrial
Applications, Data Processing Center (DPC), Cloud
Computing, Financial Services, Medical Centers,
Critical Applications in general, etc..
Waveform (Battery Mode)
BATTERY
Type
Quantity
Recharge Time
CONNECTIONS
Communications
Output
Protection Port
EPO (Emergency Power Off)
Intelligent Slot
REQUIREMENTS AND SOFTWARE
Software
Ports
PRODUCT DETAILS
Dimensions
Depth x Width x Height (mm)
Weight
ENVIRONMENT
Temperature
Humidity
Noise level
Pure Sine Wave
12 V / 7 Ah
3
12 V / 9 Ah
12 V / 7 Ah
4h to 90%
6
12 V / 9 Ah
USB and RS-232 ports
8x IEC
1x IEC C19 + 6x IEC C13
(4 programmable output)
(3 programmable output)
RJ-11/RJ/45 (in/out)
Yes
Yes
ViewPower
1x USB port or 1x Port RS-232
438 x 480 x 88
18.4kg
17kg
438 x 600 x 88
25.7kg
29kg
0°C - 40°C
20 - 90% (non condensing)
< 50dB at 1 meter
44
45
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
Professional UPS
VFI Rack
Hi-Power
VFI 6000/10000R VA
l
l
l
l
l
l
l
l
l
l
ON-LINE Technology
True On-Line Double Conversion Technology
Programmable Output Voltage and Frequency
High Power output Factor 0.8
LCD Panel with detailed information
1x Terminal block Output
1x IEC type outlet
ECO mode for power saving
EPO Function (Emergency Power Off)
Communication USB, RS-232 and optional SNMP
ViewPower software for controlling and monitoring
VFI 6000/10000R LCD
optional accessories
MODEL
Power
INPUT
Low Line Transfer (% Load)
Voltage below which the UPS switches to battery mode
VFI 6000 R LCD
6000 VA / 4800 W
110 Vac ± 3% (50%) / 176 Vac ± 3% (100%)
Low Line Comeback
Voltage Low Line Loss + 10V
Voltage above which the UPS switches to AC mode
High Line Transfer
300 Vac ± 5%
Voltage above which the UPS switches to battery mode
High Line Comeback
Voltage below which the UPS switches to AC mode
Frequency Range
Phase
Power Factor
OUTPUT
Output Voltage (Configurable)
Voltage Regulation AC
Frequency Range (Configurable)
Frequency Converter Mode
PowerWalker VFI Rack series with true On-Line
Double Conversion technology always provides
clean electric power thereby protecting the connected equipment from all power supply problems.
VFI series of PowerWalker is built with true double
conversion technology, where in the first phase
of conversion, the AC power at the UPS input is
converted to DC. Then in the second phase, the
DC electricity is converted back to AC power. In
this way, the load connected to the UPS output is
isolated from the electrical input current and its
imperfections. The result is an always clean and
stable output power.
Another advantage of this technology is its “zero”
transfer time in case of total power failure at the
entrance. In addition, VFI Series PowerWalker rack
provides the most reliable voltage regulation (1%
of the nominal set).
PowerWalker VFI series features a USB port and
one Serial (RS-232) allowing the unit to be connected to a large number of operating systems for
configuration and monitoring of the unit.
This type of UPS is specially designed for all professional applications. Especially recommended for
critical applications and high power CPD, industrial, financial services, medical centers, etc
Frequency Range (Battery Mode)
Current Crest Ratio
Total Harmonic Distortion
Transfer Time AC mode to Battery mode
Transfer Time Inverter-Bypass
Waveform (Battery Mode)
BATTERY
Type (units.)
Recharge Time
Charging Current
Charging Voltage
CONNECTIONS
Communications
EPO (Emergency Power Off)
Output
REQUIREMENTS AND SOFTWARE
Software
Ports
PRODUCT DETAILS
Dimensions
Depth(+handles) x Width x Height (mm)
Weight
VFI 10000 R LCD
10000 VA / 8000 W
Voltage High Line Loss - 10V
46Hz ~ 54Hz (50Hz) / 56Hz ~ 64Hz (60Hz)
Single phase with ground
≥ 0.99 @ 100% Load
208/220/230/240Vac
± 1%
50Hz / 60Hz
50Hz ± 0,1Hz or 60Hz ± 0,1Hz
3:1
≤ 3 % THD (linear load) / ≤ 6 % THD (non-linear load)
Zero
Zero
Pure Sine Wave
12 V / 7 Ah (20 Pcs.)
12 V / 9 Ah (20 Pcs.)
7h to 90% after complete discharge
7h -> 90%
1.0 A (max.)
273.0 Vdc ± 1%
USB and RS-232 ports + Intelligent Slot
Yes
2x Output Terminal (1x Programable) + 2x IEC
ViewPower
1x USB port or 1x Port RS-232
650(+38) x 438 x 260
81,5kg
83,5kg
46
47
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
VFI Rack
Professional UPS
VFI Rack
Hi-Power
VFI Series 1000/1500/2000/3000/6000/10000 VA (Rack)
MODEL
Power
INPUT
Low Line Transfer (% Load)
VFI 1000RM
LCD
1000VA / 800W
VFI 1500RM
VFI 2000RM
VFI 3000RM
LCD
LCD
LCD
1500VA / 1200W 2000VA / 1600W 3000VA / 2400W
Low Line Comeback
High Line Transfer
High Line Comeback
Current Crest Ratio
Total Harmonic Distortion
Transfer Time
Protection Port
EPO (Emergency Power Off)
Intelligent Slot
REQUIREMENTS AND SOFTWARE
Software
Ports
PRODUCT DETAILS
Dimensions
Depth x Width x Height (mm)
Weight
ENVIRONMENT
Temperature
Humidity
Noise level
Frequency Converter Mode
48 ~ 52Hz or 58 ~ 62Hz
50Hz ± 0.2Hz or 60Hz ± 0.2Hz
3:1
≤ 2% THD (Linear Load) 8% max. (Batt. Mode before shut down)
Zero
4 ms (Typical)
Inverter-Bypass
Output
Frequency Range
Phase
Power Factor
OUTPUT
Output Voltage (Configurable)
Voltage Regulation AC
Frequency Range (Configurable)
208/220/230/240Vac
± 1 % (Batt. Mode)
AC mode to Battery mode
Waveform (Battery Mode)
BATTERY
Type
Quantity
Recharge Time
CONNECTIONS
Communications
High Line Comeback
45Hz ~ 55Hz or 56Hz ~ 65Hz
Single phase with ground
+/- 1Hz
Transfer Time
Pure Sine Wave
12 V / 7 Ah
3
12 V / 9 Ah
12 V / 7 Ah
4h to 90%
6
12 V / 9 Ah
USB and RS-232 ports
8x IEC
1x IEC C19 + 6x IEC C13
(4 programmable output)
(3 programmable)
RJ-11/RJ/45 (in/out)
Yes
Yes
438 x 480 x 88
17kg
Frequency Range (Battery Mode)
Current Crest Ratio
Total Harmonic Distortion
Transfer Time AC mode to Battery mode
Transfer Time Inverter-Bypass
Waveform (Battery Mode)
BATTERY
Type (units.)
Recharge Time
Charging Current
Charging Voltage
CONNECTIONS
Communications
EPO (Emergency Power Off)
Output
REQUIREMENTS AND SOFTWARE
Software
Ports
PRODUCT DETAILS
Dimensions
Depth(+handles) x Width x Height (mm)
Weight
ViewPower
1x USB port or 1x Port RS-232
18.4kg
300 Vac ± 5%
Voltage above which the UPS switches to battery mode
290 Vac ± 5%
Voltage below which the UPS switches to AC mode
Frequency Range
Phase
Power Factor
OUTPUT
Output Voltage (Configurable)
Voltage Regulation AC
Frequency Range (Configurable)
Voltage Low Line Loss + 10V
Voltage above which the UPS switches to AC mode
Voltage below which the UPS switches to AC mode
VFI 10000 R LCD
10000 VA / 8000 W
110 Vac ± 3% (50%) / 176 Vac ± 3% (100%)
High Line Transfer
300 Vac ± 5%
Voltage above which the UPS switches to battery mode
VFI 6000 R LCD
6000 VA / 4800 W
Low Line Comeback
170/150/130/120VAC ±5%
Voltage above which the UPS switches to AC mode
(Frequency Converter Mode)
Frequency Range (Battery Mode)
Voltage below which the UPS switches to battery mode
160/140/120/110VAC ± 5%
Voltage below which the UPS switches to battery mode
MODEL
Power
INPUT
Low Line Transfer (% Load)
Voltage High Line Loss - 10V
46Hz ~ 54Hz (50Hz) / 56Hz ~ 64Hz (60Hz)
Single phase with ground
≥ 0.99 @ 100% Load
208/220/230/240Vac
± 1%
50Hz / 60Hz
50Hz ± 0,1Hz or 60Hz ± 0,1Hz
3:1
≤ 3 % THD (linear load) / ≤ 6 % THD (non-linear load)
Zero
Zero
Pure Sine Wave
12 V / 7 Ah (20 Pcs.)
12 V / 9 Ah (20 Pcs.)
7h to 90% after complete discharge
1.0 A (max.)
273.0 Vdc ± 1%
USB and RS-232 ports + Intelligent Slot
Yes
2x Output Terminal (1x Programable) + 2x IEC
ViewPower
1x USB port or 1x Port RS-232
650(+38) x 438 x 260
81,5kg
83,5kg
438 x 600 x 88
25.7kg
29kg
0°C - 40°C
20 - 90% (non condensing)
< 50dB at 1 meter
48
49
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
VFI 3-1 Phase
Professional UPS
VF I T ower
On-Line 3-1
l
l
l
l
l
l
l
l
l
l
l
l
VFI 3-1 Phase
Hi-Power
VFI 10000TCP 3/1
VFI 10000/20000TP 3/1
True double-conversion with pure sine wave output
Output power factor 0.9
Monitoring software included
Wide input voltage range
(110-276 VAC 1P in/ 190-478VAC 3P in)
Input power factor correction
Input THDi <5%, Output THDv <2%
50/60 Hz frequency converter mode
ECO mode operation for energy saving
Emergency power off (EPO) function
Intelligent fan control for reduced noise level
N+X Parallel Redundancy for up to 4 UPS of same size
Integrated maintenance bypass switch
VFI 10000TCP 3/1
VFI 10000TP 3/1
PowerWalker VFI series with true On-Line Double
Conversion technology always provides clean
electric power thereby protecting the connected
equipment from all power supply problems.
PowerWalker VFI series with true On-Line Double
Conversion technology always provides clean
electric power thereby protecting the connected
equipment from all power supply problems.
VFI series of PowerWalker is built with true double
conversion technology, where in the first phase
of conversion, the AC power at the UPS input is
converted to DC. Then in the second phase, the
DC electricity is converted back to AC power. In
this way, the load connected to the UPS output is
isolated from the electrical input current and its
imperfections. The result is an always clean and
stable output power.
Parallel configuration option allows you to connect
up to 4 devices in parallel thus reaching a total
capacity of 40KVA. Redundant configuration with
2 units ensures the electrical supply even one of
the two UPS fails.
PowerWalker VFI series features a USB port and one
Serial (RS-232) allowing the unit to be connected
to a large number of operating systems for
configuration and monitoring of the unit.
VFI series of PowerWalker is built with true
double conversion technology, where in the first
phase of conversion, the AC power at the UPS
input is converted to DC. Then in the second
phase, the DC electricity is converted back to AC
power. In this way, the load connected to the
UPS output is isolated from the electrical input
current and its imperfections. The result is an
always clean and stable output power.
VFI 20000TP 3/1
Parallel configuration option allows you to
connect up to 4 devices in parallel thus reaching
a total capacity of 40KVA / 80KVA Redundant
configuration with 2 units ensures the electrical
supply even one of the two UPS fails.
PowerWalker VFI series features a USB port
and one Serial (RS-232) allowing the unit to
be connected to a large number of operating
systems for configuration and monitoring of the
unit.
This type of UPS is specially designed for
all
professional
applications.
Especially
recommended for critical applications and high
power CPD, industrial, financial services, medical
centers, etc
This type of UPS is specially designed for all
professional applications. Especially recommended
for critical applications and high power CPD,
industrial, financial services, medical centers, etc
50
51
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
VFI 3-1 Phase
Professional UPS
VF I T ower
On-Line 3-1
VFI 10000TCP 3/1 - VFI 10000/20000TP 3/1
MODEL
VFI 10000 TCP 3-1
VFI 10000 TP 3-1
VFI 20000 TP 3-1
Power
10000 VA / 9000 W
10000 VA / 9000 W
10000 VA / 18000 W
INPUT
Voltage
230V / 400V
Voltage Range single phase
110-276VAC single phase with ground (L-N-G)
Transfer Voltage Range
Based on Load percentage 100%/50%
Line low loss
176VAC/110VAC (±3%)
Line low comeback
186VAC/120VAC (±3%)
Line high loss
276VAC (±3%)
Line high comeback
266VAC (±3%)
Voltage Range three phase
190-478VAC three phase with ground (R-S-T-N-G)
Transfer Voltage Range
Based on Load percentage 100%/50%
Line low loss
305VAC/190VAC (±3%)
Line low comeback
322VAC/208VAC (±3%)
Line high loss
478VAC (±3%)
Line high comeback
461VAC (±3%)
THDi
<5% with full load
Frequency Range
45-55Hz/54-66Hz
Power Factor
≥ 0.99 at Full Load
Generator Set
1.8 x UPS Rating Power
OUTPUT
Voltage
208/220/230/240 ± 1%
Frequency (Synchronized Range)
45-55Hz/54-66Hz
Frequency (Battery Mode)
50/60Hz ± 0.05%
Current Crest Ratio
3:1
Harmonic Distortion
≤ 2% (Full Linear Load)
Waveform
Pure Sine Wave
Overload Capability
5 min at 100-110% 1 min at 110-130% 10 sec at 130-150% 2 sec at >150%
Parallel configuration
Up to 4 UPS of same size (optional parallel port required)
TRANSFER TIME
AC to DC
Zero
Inverter to Bypass
Zero
Inverter to ECO
Zero
ECO to Inverter
<10ms
BATTERY
Type
12V / 9Ah
Quantity
20x
24x in one string
48x in two strings of 24 pcs
Recharge Time
8h to 90%
3h to 90%
BYPASS
Bypass Before UPS Power-on
Default “No” Change to “Yes” via display panel
Overload und UPS Failure
Automatically transfer to bypass
By Setting
Voltage Rang: 176-276V ± 3%
CONNECTIONS
Communications
USB & RS232
Outlets
2x IEC C13, Terminal outlet
Terminal outlet
Intelligent Slot
Yes
AS-400 Slot
Yes
EPO (Emergency Power Off)
Yes
Maintenance Switch
Yes
REQUIREMENTS AND SOFTWARE
Software
Winpower
Ports
1x USB port or 1x Port RS-232
PRODUCT DETAILS
Dimensions
550 x 260 x 708
650 x 350 x 890
Depth(+handles) x Width x Height
(mm)
Weight
85kg
Noise Level
0 - 95% (non-condensing)
at 0°C – 40°C
127kg
Hi-Power
VFI 3-1 Phase
VFI 3-1 phase accessories and battery packs
3-1 Phase Expanding Autonomy
Extend the Autonomy of your facilities in case
of power outage by connecting one or more
additional battery packs. The Battery Pack is
configurable depending on the desired increased
autonomy. The Battery Pack are specifically
configured for PowerWalker VFI 3-1 Series.
AS-400 Card 3
Specific card to communicate systems with
IBM AS-400 with VFI Series of PowerWalker or for
other application if you need dry contact ports.
NMC card
The SNMP communication module enables
monitoring, management and maintenance
of the UPS PowerWalker from anywhere in the
world, with only a computer with Internet access.
The VFI Series of PowerWalker have the Intelligent
Slot for inserting the card.
Modbus card
The Modbus communication module gives
an easy and simple way to achieve remote
monitoring and controling of all the UPS in the
same net at same time using the standardized
Modbus-Protocol.
External Battery Charger
The additional battery charger allows to speed
up the charging process especially when UPS is
connected with additional battery packs. For VFI
10000TCP 3/1 available with external housing.
For VFI 10000/20000TP 3/1 as charger board to
implement into UPS.
188kg
< 55dB at front 1 Meter
0 - 95% (non-condensing) at 0°C – 45°C
52
53
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
Professional UPS
Hi-Power
Redundant / Parallel Mode
Expanding Autonomy and Optional Accessories
Expanding Autonomy
Extend the Autonomy of your facilities in case of power
outage by connecting one or more additional battery
packs. The Battery Pack is configurable depending on
the desired increased autonomy. The Battery Pack are
specifically configured for PowerWalker VFI Series.
PowerWalker VFI Tower Series offer the possibility
of being connected in parallel offering two special
configurations. Such configurations are known by the
names of Redundant and Parallel modes.
SNMP card
The SNMP communication module enables monitoring,
management and maintenance of the UPS PowerWalker
from anywhere in the world, with only a computer with
Internet access. The VFI Series of PowerWalker have the
Intelligent Slot for inserting the card.
AS-400 Card
Specific card to communicate systems with
IBM AS-400 with VFI Series of PowerWalker or for other
application if you need dry contact ports.
Maintenance Bypass Switch
Maintains power to devices connected to the UPS when
it is disconnected from the system. It also has an ECO
function for energy-saving.
Rack 19” Maintenance Bypass Switch
Maintains power to devices connected to the UPS when
it is disconnected from the system. It also has an ECO
function for energy-saving.
Rails For Rack 19”
Allows installation of PowerWalker 19” Rack UPS inside
a 19” cabinet.
Redundant Mode
In redundant configuration there are, at least, 2 units of UPS (it can be more) required.
One of the UPS acts as main, delivering clean power, free of imperfections to the load
connected to the UPS output. The second UPS is connected to the first, remaining in
Hot-Standby situation. That is, if the first fails, the second would come into operation
immediately. Furthermore, this configuration has the ability to give the installation
twice autonomy, autonomy. This redundant design is recommended for critical
applications where failure of a UPS may not result in the breakdown of the electric
power system.
Parallel Mode
Schuko to IEC Adapter
Adapt IEC outlets (female) to Schuko sockets (female).
The second possible configuration, the parallel mode, allows summing power to the
system. Thus, if we combine two 10000VA models, we would get the equivalent of
20000VA. If the setting out is of 4 units, the resulting power would be 40000VA. The
maximum setting is 4 UPS.
Either configuration admits enlargement of autonomy, configurable depending on
customer needs.
54
55
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
Professional UPS
VF I T ower
On-Line 3P/3P
Hi-Power
VFI 3/3 Phase
VFI 3/3 Phase
ON-LINE Technology
VFI 20000/30000/40000 (BX, BE, BI) 3P/3P
l 3 phase in / 3 phase out
l Parallel and parallel redundant (N+X) system setup with
l
l
l
l
l
l
l
l
l
l
already integrated communication slots
N+X Parallel Redundancy for up to 8 UPS of same size
AS/400 port, Intelligent slot, EPO, RS-232, RS-485, extended
slot, parallel communication port, integrated MBS
Dual Feed input, Terminal- in and - out, IP21 compliant design
Optional: SNMP module, Battery Pack, USB-Card
True double-conversion with pure sine wave output
Monitoring software included
Wide input voltage range of 210 to 475 Vac
ECO mode operation for energy saving
Emergency power off (EPO) function
With its true double-conversion online UPS design it
fits perfectly to any environment where uninterrupted
power feed is required to secure critical equipment’s
continuous operation. Multiple communication ports
allow integrating the UPS in existing structures. This
model provides a perfect solution for power protection,
and solves power quality problems such as surges,
spikes, voltage fluctuations, harmonic distortion, clutter
interference and frequency fluctuations.
Each phase is independently double converted and
regulated. In addition, PFC (power factor control)
controller is used for real time control and data processing,
VFI 20000/30000/40000 BX
BE/BI
BX
ensuring high availability at all times. Further
extent reliability is accomplished by introducing
intelligent charge mode which significantly
prolongs service life of batteries. Also, possibility
to have dual feed on UPS input adds availability
thus increases reliability of system.
IP21 compliant design makes it a perfect fit
to industrial and other applications, where
harsh environmental conditions may set extent
requirements to mechanical design. Optional
filter is also available for further protection
against the smallest damaging particles.
20000/30000/40000 BX
VFI 20000/30000/40000 BE/BI
56
57
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
VFI 3/3 Phase
Professional UPS
VF I T ower
On-Line 3-3
VFI 3/3 Phase
Hi-Power
VFI 20000TP 3/3 (BE / BI / BX)
VFI 30000TP 3/3
MODEL
VFI 20000 3/3 BE
VFI 20000 3/3 BI
VFI 20000 3/3 BX
Power
20000VA / 16000W
20000VA / 16000W
20000VA / 16000W
INPUT
Voltage
400 Vac (L-L), 230 Vac (L-N)
Voltage Range
285-475VAC @ Full Load 210-475VAC @ <70% Load
Phase
3-Phase + Neutral + Ground
Dual-line Input
Yes
THDi
<5%
Frequency Range
40-70Hz (self-adaptive to 50Hz/60Hz)
Power Factor
≥ 0.99
Generator Set
2.2 x UPS Rating Power
OUTPUT
Voltage
346/360/380/400/416VAC Derating 10% with 346/360VAC
Frequency (Synchronized Range)
46-54Hz/56-64Hz
Frequency (Battery Mode)
50/60Hz ± 0.05Hz
Current Crest Ratio
3:1
Harmonic Distortion
≤ 2% THD (Full Linear Load) ≤ 5% THD (Non-Linear Load)
Waveform
Pure Sine Wave
Overload Capability
10 min @ 110-125% 1 min @ 125-150% 0.5 [email protected] >150%
Parallel configuration
Up to 8 UPS of same size Parallel port built-in
TRANSFER TIME
AC to DC
Zero
Inverter to Bypass
Zero
Inverter to ECO
Zero
ECO to Inverter
<10ms
BATTERY
Type
12V
Quantity
Housing space for 60 pcs
60 pcs
External battery solution
Charging Current
± 4.5A
BYPASS
Static Bypass
Yes
MBS
Yes
CONNECTIONS
Communications
RS-232, RS-485
Outlets
Terminal outlet
Intelligent Slot
Yes
AS-400 Slot
Yes
EPO (Emergency Power Off)
Yes
REQUIREMENTS AND SOFTWARE
Software
Winpower
PRODUCT DETAILS
Dimensions
700 x 420 x 1245
700 x 420 x 1245
643 x 420 x 956
Depth x Width x Height (mm)
Weight
120kg
Noise Level
20 - 90% (non-condensing)
at 0°C – 40°C
272kg
82kg
< 55dB @ 1 Meter
0 - 95% (non-condensing) at 0°C – 45°C
MODEL
VFI 30000 3/3 BE
VFI 30000 3/3 BI
VFI 30000 3/3 BX
Power
30000VA / 24000W
30000VA / 24000W
30000VA / 24000W
INPUT
Voltage
400 Vac (L-L), 230 Vac (L-N)
Voltage Range
285-475VAC @ Full Load 210-475VAC @ <70% Load
Phase
3-Phase + Neutral + Ground
Dual-line Input
Yes
THDi
<5%
Frequency Range
40-70Hz (self-adaptive to 50Hz/60Hz)
Power Factor
≥ 0.99
Generator Set
2.2 x UPS Rating Power
OUTPUT
Voltage
346/360/380/400/416VAC Derating 10% with 346/360VAC
Frequency (Synchronized Range)
46-54Hz/56-64Hz
Frequency (Battery Mode)
50/60Hz ± 0.05Hz
Current Crest Ratio
3:1
Harmonic Distortion
≤ 2% THD (Full Linear Load) ≤ 5% THD (Non-Linear Load)
Waveform
Pure Sine Wave
Overload Capability
10 min @ 110-125% 1 min @ 125-150% 0.5 [email protected] >150%
Parallel configuration
Up to 8 UPS of same size Parallel port built-in
TRANSFER TIME
AC to DC
Zero
Inverter to Bypass
Zero
Inverter to ECO
Zero
ECO to Inverter
<10ms
BATTERY
Type
12V
Quantity
Housing space for 128 pcs
128 pcs
External battery solution
Charging Current
± 4.5A
BYPASS
Static Bypass
Yes
MBS
Yes
CONNECTIONS
Communications
RS-232, RS-485
Outlets
Terminal outlet
Intelligent Slot
Yes
AS-400 Slot
Yes
EPO (Emergency Power Off)
Yes
REQUIREMENTS AND SOFTWARE
Software
Winpower
PRODUCT DETAILS
Dimensions
700 x 470 x 1752,5
700 x 470 x 1752,5
710 x 470 x 1150
Depth x Width x Height (mm)
Weight
Noise Level
195kg
20 - 90% (non-condensing)
at 0°C – 40°C
515kg
110kg
< 55dB @ 1 Meter
0 - 95% (non-condensing) at 0°C – 45°C
58
59
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
VFI 3/3 Phase
Professional UPS
VF I T ower
On-Line 3-3
MODEL
VFI 40000 3/3 BE
VFI 40000 3/3 BI
VFI 40000 3/3 BX
Power
20000VA / 16000W
20000VA / 16000W
20000VA / 16000W
INPUT
Voltage
400 Vac (L-L), 230 Vac (L-N)
Voltage Range
285-475VAC @ Full Load 210-475VAC @ <70% Load
Phase
3-Phase + Neutral + Ground
Dual-line Input
Yes
THDi
<5%
Frequency Range
40-70Hz (self-adaptive to 50Hz/60Hz)
Power Factor
≥ 0.99
Generator Set
2.2 x UPS Rating Power
OUTPUT
Voltage
346/360/380/400/416VAC Derating 10% with 346/360VAC
Frequency (Synchronized Range)
46-54Hz/56-64Hz
Frequency (Battery Mode)
50/60Hz ± 0.05Hz
Current Crest Ratio
3:1
Harmonic Distortion
≤ 2% THD (Full Linear Load) ≤ 5% THD (Non-Linear Load)
Waveform
Pure Sine Wave
Overload Capability
10 min @ 110-125% 1 min @ 125-150% 0.5 [email protected] >150%
Parallel configuration
Up to 8 UPS of same size Parallel port built-in
TRANSFER TIME
AC to DC
Zero
Inverter to Bypass
Zero
Inverter to ECO
Zero
ECO to Inverter
<10ms
BATTERY
Type
12V
Quantity
Housing space for 128 pc
128 pc
External battery solution
Charging Current
± 4.5A
BYPASS
Static Bypass
Yes
MBS
Yes
CONNECTIONS
Communications
RS-232, RS-485
Outlets
Terminal outlet
Intelligent Slot
Yes
AS-400 Slot
Yes
EPO (Emergency Power Off)
Yes
REQUIREMENTS AND SOFTWARE
Software
Winpower
PRODUCT DETAILS
Dimensions
700 x 470 x 1752,5
710 x 470 x 1150
Weight
Noise Level
195kg
20 - 90% (non-condensing)
at 0°C – 40°C
VFI 3/3 Phase
VFI 3/3 phase accessories and battery packs
VFI 40000TP 3/3
Depth x Width x Height (mm)
Hi-Power
515kg
3-1 Phase Expanding Autonomy
Extend the Autonomy of your facilities in case
of power outage by connecting one or more
additional battery packs. The Battery Pack is
configurable depending on the desired increased
autonomy. The Battery Pack are specifically
configured for PowerWalker VFI 3-1 Series.
NMC card
The SNMP communication module enables
monitoring, management and maintenance
of the UPS PowerWalker from anywhere in the
world, with only a computer with Internet access.
The VFI Series of PowerWalker have the Intelligent
Slot for inserting the card.
114kg
< 55dB @ 1 Meter
0 - 95% (non-condensing) at 0°C – 45°C
60
61
w w w . p o w e r w a l k e r. c o m
w w w . p o w e r w a l k e r. c o m
Reliable Power Protection
w w w. p o w e r w a l k e r. c o m
BlueWalker GmbH
Martin-Buber-Str. 12, 41470 Neuss, Germany
Tel.: +49(0)2137-929873
Copyright BlueWalker GmbH. All right reserved. All other trademarks are trademarks of their respective companies. We
reserve the right for technical changes and mistakes. The data and images contained herein may change without prior notice.
We reserve the right to modify them anytime to correct possible errors. Reproduction and copying, in whole or part of the
contents of this document in any medium without the written permission from BlueWalker GmbH is forbidden.BlueWalker
GmbH reserves the right for legal action against any act against our legitimate rights of intellectual property of all of the
contents of this document. PowerWalker is a trademark of Bluewalker GmbH.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement