Siemens LOGO 0AB7 Flyer (ENG) (wordt in een nieuw venster geopend)

Siemens LOGO 0AB7 Flyer (ENG) (wordt in een nieuw venster geopend)

LOGO! Now twice as ingenious!

The choice is yours: the well-proven logic module – now also with Ethernet

Micro Automation siemens.com/logo

In infrastructure ...

2

Heating / ventilation / air-conditioning

Energy management

Heating

Cooling systems

Ventilation systems

Air-conditioning systems

Building management systems

Light control (outdoor and indoor

■ lighting)

Door/gate control

Roller blind and awning control

Irrigation and sprinkler systems

Monitoring equipment

Access controls

Monitoring of drive controls

Alarm systems

Limit value checks

Traffic light controllers

Luggage inspection

Profitable switching and controlling

In automation, all of the potential means of savings

Intelligent technology with a vision

must be consistently used – from planning and commissioning to operation. What is needed are systems that allow the constantly increasing requirements to be quickly and economically fulfilled: Intelligent

LOGO! is ideally suited for implementing simple automation tasks in industry and building management systems.

The intelligent logic module is characterized by maximum user-friendliness and it leaves little to be desired in terms of functionality, thanks in no small part to the high memory capacity and efficient use of memory. With the use of expansion modules, LOGO! can control even the most complex plants without any problems.

solutions that stand out due to maximum flexibility,

Maximum flexibility due to consistent modularity

reliability, and user-friendliness. The best example of innovative technology that completely fulfills these high requirements is LOGO! – the world‘s leading logic module for switching and controlling.

A wide range of modules make it possible to individually expand LOGO! to 24 digital inputs, 16 digital outputs,

8 analog inputs, and two analog outputs. Communication modules for AS-Interface and KNX are also available.

With the analog output module, for example, you can solve simple control tasks. This is supported by the special functions of PI controller, ramp function, and analog multiplexing.

... and industry

Transport equipment

Conveyor belts

Lifting platforms

Lifts

Silo systems

Automatic feeders

Special solutions

Solar plants

Use on ships

Use in extreme ambient conditions

Display panels and traffic signboards

Machine controls

Motors, pump and valve controls

Air compressors

Extraction and filtering installations

Sewage plants

Sawing and planing machines

Etching and cleaning equipment

Tried and tested millions of times – in numerous applications

In combination with the LOGO! software Soft Comfort, the handling of our logic module is child’s play: Creating programs, project simulating and documentation are quite easy using drag & drop – for maximum userfriendliness. In addition, a display with the capability of directly changing process parameters in the message text always ensures professional handling and satisfied users.

All of this is the reason why LOGO! has proven itself over the past 15 years in millions of machine and building appli cations around the world.

New applications made possible by new 0BA7 basic units

The performance of LOGO! can be expanded in terms of the number of I/Os and program capacity by means of simple networking. It is not always necessary to switch to more complex PLC configurations for simple networking requirements. Instead, you can remain in the familiar, simple configuration world of our logic module and continue networking easily and cost-effectively. Even in a single family home, there are so many possible applications that the number of I/Os is exceeded by a single

LOGO!. The simple networking via Ethernet is useful here.

The new communication options via Ethernet now allow small LOGO! networks to be set up – as well as communication with higher-level systems.

Whether in infrastructure or industry – a quick and cost-effective solution

3

Easy expansion by means of a text display or expansion modules for a reliable solution

LOGO! – simple, brilliant, reliable

LOGO! in assemblies with the function modules

LOGO! 0BA6 basic units, together with the expansion modules and the external text display, provide a broad and proven basis for reliable solutions in mechanical engineering and building management systems. Practice-oriented function blocks are easily connected via the software using the cursor and their interaction can be immediately tested.

4

The simplest connection

Outstanding performance and overview

With LOGO! four of the eight digital inputs that are available on the hardware can be used as analog inputs and four as high-speed counter inputs up to a frequency of

5 kHz. With a program memory for 200 function blocks, the 12/24 V DC devices provide sufficient capacity for many stand-alone applications. Up to 50 four-line message texts with a maximum of 32 characters per line ensure userfriendliness in practice and clearly display all of the relevant machine parameters. Well-conceived options such as ticker text, bar graph or status parameter also contribute to the user-friendliness. Function blocks for arithmetic and pulse width modulation open up further usage options.

Last but not least: the Teleservice option, which often does away with costly on-site service calls and really pays off if you sell your systems cross-regionally.

Additional text display

LOGO! allows an additional text display, which is perfectly tailored to the needs of a logic module, to be connected.

It is directly connected to the LOGO! without a communication module. The configuration is done using the same function block as for the internal display. You decide whether message texts are displayed on the internal or

external display – or on both.

Highlights of LOGO!

Can be modularly expanded up to 50 I/Os

■ 230 V units can be expanded with analog modules

All three phases can be combined in a configuration

Extremely simple software

Display of up to 50 messages, either by LC display on the module, external TD, or both together

Supports 12 or 16 standard characters per line,

depending on the selected character set; you can

double the number of characters with the ticker

function

Users can toggle between 2 languages

Display of up to 4 bar charts and up to 4 I/O status parameters per message

■ Controllable backlight of both displays can also be used in continuous operation

Password protection for STOP mode on TD

5

6

LOGO! – and now also with Ethernet

LOGO! 0BA7 impressively proves that we are constantly further developing our pioneering logic module. The two new basic devices supplement the existing 0BA6 basic devices, which have already been tried and tested worldwide.

Proven devices have been consistently further developed

The developmental leap forward can even be seen on the outside of our new LOGO! 0BA7 basic devices: They are wider by two modular widths and the previous interface has been replaced by an Ethernet interface on the underside of the device.

In addition, there is a slot for SD cards on the right front of the device. In spite of these exterior changes, the new devices are compatible with all existing I/O modules. Even programs from the previous LOGO! generations can be used in the new devices.

The highlight of the 0BA7 basic devices is without a doubt the standard Ethernet interface. It is used as a programming interface and for communicating with other LOGO!

0BA7 basic devices or SIMATIC automation components such as SIMATIC S7 CPUs, HMI Panels, and PCs. Up to eight LOGO! devices can be networked via the Ethernet

interface.

Standard Ethernet interface for communication with further LOGO!

basic units or other automation components

New communication options

The networking is mainly used for direct communication between several LOGO! devices. The advantages that result from this:

Increasing the number of I/Os in a configuration. One logic module executes the program and the others only serve as an

I/O expansion – without processing their own program. This means that a multi-cell layout in the control cabinet is now also possible.

Expansion of the program memory. All logic modules process their own program and only exchange some of the data among each other.

Function extensions

– Program memory extended to 400 function blocks

– Astronomical time switch

Min./Max. function

Mean value generation

Analog filter

Stopwatch

Macro and library function

Data logging

7

8

LOGO! Software – simply professional

LOGO! Soft Comfort – stands for sensationally easy and quick configuration. This allows the creation of ladder and function block diagrams by selecting the respective functions and their connection via drag & drop. In addition, the entire switching

program can be simulated and tested offline on the

PC. Also possible: an online test in both program displays during operation. Last but not least, LOGO!

Soft Comfort provides professional documentation with all of the necessary project information such as switching programs, comments, and parameter settings.

A decisive argument for LOGO!

LOGO! Soft Comfort is appealing in every respect. The

user-friendliness of our software is unequaled on the market. The preferential configuration in the function block

diagram is more manageable than in the contact diagram, especially for programs with many special functions.

LOGO! Soft Comfort, however, allows programming in both display formats and the execution of online tests – as the only software in the logic module class. Since it can be executed on three operating system platforms, you will benefit from maximum flexibility when choosing a computer and a high-end device is not absolutely essential.

The standard simulation function makes program development easy. You can immediately simulate, optimize and then group individual program sections for total functionality.

The outstanding functionality of our software is rounded out by professional tools for creating the user documentation. A context-sensitive help function brings additional advantages: It puts an end to the tiresome business of paging through manuals and reduces the weight of your luggage when making service calls. Last but not least, an integrated tutorial and numerous examples facilitate your entry into modern automation technology.

1

Create

NEW

■ Astronomical time switch

■ Min./Max. function

■ Mean value generation

■ Analog filter

■ Stop watch

2 Simulate

1

3

Online test

4

2 3

LOGO!

4

Document

More functions ...

With the current version of LOGO! Soft Comfort, you can, of course, easily configure all of the new LOGO! hardware and firmware functions.

The following five function blocks have been added:

Astronomical time switch

Min./Max. function

Mean value generation

Analog filter

Stop watch

Sensationally easy and quick programming thanks to

43 function blocks and operating via drag & drop

... and important innovations

Creating macro blocks with library function

Recurring parts of programs can be saved separately as complete blocks and used in other programs. You can build up your own block library from regularly used partial

applications and quickly and easily integrate them into new projects. This speeds up testing and programming.

Data logging

Data from the production process can be saved in the internal memory of the LOGO! or on a standard SD card in order to either read it with a PC or evaluate it from the SD card at the workstation.

Networking

A real highlight of the LOGO! 0BA7 generation are the

different communication modes:

■ Communication between LOGO! and LOGO! – the second LOGO! functions as an I/O expansion without its own program.

■ Communication between LOGO! and LOGO! – the second LOGO! executes its own program and

exchanges some data with the other one.

■ Communication between LOGO! and SIMATIC S7 CPUs or Panels, which provide S7 communication via

Ethernet.

9

10

LOGO! – the proven basic units ...

LOGO! impresses customers due to the wide variety of possible

applications and it allows the easy implementation of compre hensive applications – last but not least due to the possibility of selecting from among 38 integrated functions and linking them to up to

200 blocks. When operating and monitoring, the 4-line backlit

display with a maximum of 32 characters per line ensures a high

degree of user-friendliness. The message text allows the display of text, setpoints and actual values, bar graphs and status parameters.

Of course, parameters can be adjusted in the message text.

Flexibility is always assured due to the diverse expansion options.

... and the new ones with Ethernet

You have grown with LOGO! and you want to always be able to solve more tasks with a greater demand on industrial communication?

Then, the new LOGO! 0BA7 devices are the ideal solution for you.

With the new basic devices, you can easily expand old programs by adding functions.

Also possible: the supplementing of additional I/Os or the integration of a user-friendly operator guidance via touch panels. Previously developed LOGO! programs can be used as a basis and the easy

configuration continues.

LOGO! simply ingenious – and now …

11

LOGO! functions

With the eight basic functions and 30 special functions, simple switching programs can be created quickly – either directly on the device or via PC. You can find a large selection of example applications under www.siemens.com/logo

The eight basic functions

AND (and) series connection NO contact

NAND (and not)

parallel connection

NC contact

AND with edge

evaluation

(pos. edge)

NAND (and not) with edge evaluation (neg. edge)

OR (or) parallel

connection NO contact

NOR (or not) series connection

NC contact

XOR (exclusive or)

2-way changeover

NOT (not) inverter

The special functions

ON delay

OFF delay

ON/OFF delay

LOGO! pays off

Up to 50% cost savings

■ Replaces many conventional switching devices

■ Requires less space in the control cabinet

■ Fewer accessories

■ Less storage space

■ Saves on servicing costs because it is free of wear

Up to 70% time savings

■ Simply snap it onto a standard mounting rail

■ Low wiring overhead

■ Simple programming using LOGO!

Soft Comfort

■ Use ready-to-use sample programs at no cost or create and test them on the PC and quickly transfer them free of errors

■ Automatic daylight-saving adjustment

■ Documentation

Up to 70% space savings

■ 4/6 modular widths suffice as a replacement for many relays, time switches, and contactor relays

■ 8 basic and 30/35 special functions replace many conventional switching devices

Universally applicable

■ Vibration-proof

■ High electromagnetic compatibility (EMC)

■ Fully industrial-grade

■ For all climatic conditions

■ Radio suppression class B

■ All of the required certifications for worldwide use

■ Marine approval

Latching ON delay

Interval relay/

Pulse output

Interval relay, edge-triggered

Pulse generator

12

*Binary inputs of function blocks can be negated directly

LOGO! basic unit 0BA6

38/43 ready-to-use functions integrated – no additional devices such as operating hours counter required

Linking of 200/400 functions possible

8 digital inputs (incl. 4 AI with 12/24 V DC) and 4 digital outputs on board

Flexibly expandable up to 24 DI, 16 DO, 8 AI, and 2 AO

Display of message texts, actual and setpoint values and direct modification of the values on the display (not on Pure variants)

Integrated data retentivity – ensures backup of the current values in the event of a power failure

Software LOGO! Soft Comfort V 7 for the userfriendly creation of switching programs on the

PC for all LOGO! generations, which can run on various operating systems

Random Staircase lighting timer

Convenience switch

Week time switch

Year time switch

Up/down counter

Operating hours counter

Threshold switch

13

Digital expansion modules

LOGO! basic unit 0BA7

Standard Ethernet interface as programming interface and for communication with other LOGO! basic devices 0BA7 or SIMATIC automation components such as SIMATIC S7 CPUs, HMI Panels and PCs

A maximum of 8 LOGO!s can be networked

Data logging

Standard SD cards as the storage medium

Program and connectioncompatible with LOGO! 0BA6

LOGO!

simply twice as ingenious

Analog comparator

Analog threshold switch

Analog amplifier Analog monitoring

Analog difference threshold switch

Latching relay

Current impulse relay

Software switch

14

Analog expansion modules Communication modules

NEW for 0BA7

Astronomical time switch

Min./Max. function

LOGO! modules

LOGO! text display

For operator prompting and servicing for the display of message texts, input and output statuses, and for setting process parameters

(usable as of basic device 0BA6, supports the range of functions of the 0BA6 basic devices)

Display of up to 50 messages

Users can toggle between 2 languages

Display of up to 4 bar charts and up to

4 I/O status parameters per message

■ Supports max. 32 Standard characters per line

■ Controllable backlight

Password protection for RUN/STOP mode on TD

Digital expansion modules*

Expansion of the digital inputs and outputs:

DM8 230R / DM16 230R

DM8 24 / DM16 24

DM8 12 / 24R

DM8 24R

DM16 24R

Analog expansion modules*

■ Expansion of the analog inputs:

AM2 for 0–10 V or 0/4 ... 20 mA signals

AM2 RTD for Pt100 or Pt1000 with automatic sensor detection

AM2 AQ for 0–10 V or 0/4 ... 20 mA signals

Communication modules*

CM AS-Interface slave

4 DI/4 DO as interface to the AS-Interface master

■ CM EIB / KNX

– max. 16 DI, 12 DO, 8 AI and 8 AO as interface to the KNX

The date and time can be synchronized via KNX

All of the digital and analog input and output signals are available as communication objects on the KNX

– Dimming and shutter/blind actuators on the KNX can be controlled in a systemconformant way

Mean value generation

Analog filter

Stopwatch

*All expansion modules are available for 0BA6 and 0BA7.

Shift register PI controller

Ramp function Analog multiplexer

Message text expanded

Arithmetic function

Pulse width modulation

15

LOGO! 0BA7– more options in detail

With an Ethernet interface and SD card slot, LOGO!

0BA7 opens up completely new perspectives – not only

Communication like never before

Devices with an “E” in their names can communicate with each other via Ethernet. This can happen in various ways:

in terms of communication capabilities. The standard

SD cards can be used – e.g. to copy programs or save data/projects with comments. In addition, the program memory has been expanded to 400 function blocks and, in place of the optional battery, the internal buffering of the real-time clock has been extended to

20 days.

Master/slave connections

between LOGO! and LOGO!

In this case, only one of a maximum of 8 basic devices processes a user program. The others only serve to expand the I/O capacity. They provide the input information of the digital and analog inputs to the first

LOGO! and execute the switching commands on the other side for the digital outputs of their hardware, or they forward the analog output values to the I/O. This does away with the limitation on the number of channels of the previous basic devices. Of course, the basic devices that are being used as slaves can be equipped with the proven expansion modules up to the maximum process image.

16

Master/master connections

between LOGO! and LOGO!

In this mode, up to 8 basic devices can also be connected to each other. However, each LOGO! processes its own program and shares only the generally needed information with the others. In this way, small, networked systems with easy program structures can be created. Each unit can continue to solve its subtask without the others, if necessary.

In both cases, up to 8 basic devices and a PC/PG for programming can be interconnected. The theoretical degree of expansion of a LOGO! configuration is thus

192 DI, 128 DO, 64 AO, and 16 AO.

Communication with SIMATIC S7

The new LOGO! basic modules can be coupled to higherlevel automation structures (e.g. SIMATIC S7 CPUs or

HMI Panels with Ethernet interface), because they can work with the standard S7 protocol. This allows, for example, the use of SIMATIC Touch Panels for operating a machine controlled by LOGO!. Of course, you can also combine these communication options as needed.

Twice the program memory and five new function blocks

The five new function blocks pay off in practice. Thus, for example, minimum and maximum temperature values can be determined over the course of a day or mean values can be formed over a defined period of time. The duration of any process can be measured using a stopwatch. In

addition, there is an astronomical time switch, which can be used for such things as controlling outside lighting or feeding times in animal husbandry, and an analog filter, which helps to smooth the influence of interference

pulses on the signal profile. Last but not least, the number of usable shift registers has been increased to four. Thus, shift registers with up to 32 bits are now possible.

Completely new perspectives for communication, data handling and storage

17

18

Increased engineering efficiency: reusable sections of a program

More complex applications can be programmed using

LOGO! Soft Comfort V7 even easier than before: Macros can now be used and libraries can be created for recurring program sequences (e.g. for roller blind controllers).

Corresponding program sections can then be selected and reused at any time. When opening a program that contains macros from the library, you are notified if the macro has been changed since its last use. Macros are also helpful when creating step sequence controls.

New usage options thanks to data logging

Thanks to data logging, you can now save specific production or process data in a data area in the LOGO! –

either by using the internal memory or by using a standard SD card up to 4 GB. This is advantageous if LOGO! is used for controlling temperatures or monitoring levels, for example. Corresponding characteristics can be easily documented and evaluated. In the program, the user can define the time intervals in which or the event by which the temperature data or levels are to be recorded.

Simply more – many more

options in

every respect

New advantages, old strengths

The status of the inputs and outputs are transferred to the

PC via the Ethernet interface and are documented there in an Excel table, for example. However, the new software also facilitates programming for users of the previous

LOGO!: Function blocks can be exchanged without having to create new connections. The simplified handling includes additional capabilities for aligning the blocks and the additional linking of comments.

Of course, the new generation of devices are also

characterized by the proven strengths of LOGO!: from the flexible, modular design and easy creation of programs, project simulation and documentation by means of drag & drop to the built-in display with HMI functionality.

The new basic devices are fully compatible with the old ones, apart from the increased width of the devices

(108 mm instead of 72 mm), which is due to the implemented innovations. They have the built-in display, cursor keys, and the familiar signal ports. Therefore, with their expanded functionality, they can completely replace the old 0BA6 basic devices.

In addition, all of the old expansion modules can be used on the new basic devices without restrictions. The only thing that must be noted is that an Ethernet cable is required in order to directly transfer an existing program from one PC to one of the new basic devices.

19

LOGO! modular – the technical details

Basic units LOGO! 12/24RC

1)

, LOGO! 12/24RCo

2)

Inputs

8

of which can be used in analog mode 4 (0 to 10 V)

Input/supply voltage

12/24 V DC

LOGO! 24C, LOGO! 24Co

8

4 (0 to 10 V)

24 V DC

LOGO! 24RC

1)

, LOGO! 24RCo

2)

8

24 V AC/DC

Permissible range with signal “0” with signal “1”

Input current

Outputs

Continuous current

Short-circuit protection

Switching frequency

Cycle time

Integrated time switches/ power reserve

Connection cables

Ambient temperature

Storage temperature

Emitted interference

Degree of protection

Certification

Mounting

Dimensions

Programming cable

Optional backup battery

LOGO! <=> LOGO! communication (Ethernet)

LOGO! <=> network

(Ethernet)

Maximum program memory

External memory module

10.8 V ... 28.8 V DC max. 5 V DC min. 8.5 V DC

1.5 mA (Ι3 ... Ι6), 0.1 mA (Ι 1, Ι 2, Ι 7, Ι 8)

4 relays

10 A with resistive load;

3 A with inductive load

External fuse required

2 Hz with resistive load;

0.5 Hz with inductive load

< 0.1 ms/function

Yes / typ. 80 h

(2 years with battery module)

2 x 1.5 mm

2

or 1 x 2.5 mm

2

0 to + 55 ºC

20.4 V ... 28.8 V DC max. 5 V DC min. 12 V DC

2 mA (Ι3 ... Ι6), 0.1 mA (Ι 1, Ι 2, Ι 7, Ι 8)

4 transistors

0.3 A

Electronic (approx. 1 A)

10 Hz

< 0.1 ms/function

Yes / typ. 80 h

(2 years with battery module)

– 40 ºC to + 70 ºC

In accordance with EN 55011 (limit class B)

IP20

In accordance with VDE 0631, IEC 1131, FM Class 1, Div 2, cULus, C-Tick, marine approvals

On 35 mm standard mounting rail, 4 MW, or wall-mounting

20.4 ... 28.8 V DC

20.4 ... 26.4 V AC max. 5 V AC/DC min. 12 V AC/DC, 2.5 mA

4 relays

10 A with resistive load;

3 A with inductive load

External fuse required

2 Hz with resistive load;

0.5 Hz with inductive load

< 0.1 ms/function

Yes / typ. 80 h

(2 years with battery module)

72 (4 MW) x 90 x 55 mm (W x H x D)

LOGO! PC cable, (RS232 or USB)

Yes

No

LOGO! PC cable, (RS232 or USB)

Yes

No

LOGO! PC cable, (RS232 or USB)

Yes

No

No

200 blocks

LOGO! memory card

No

200 blocks

LOGO! memory card

No

200 blocks

LOGO! memory card

Data logging

Online status chart

Macro function

No

No

No

No

No

No

No

No

No

Digital modules

Inputs

Input/supply voltage

Permitted range with signal “0” with signal “1”

Input current

Outputs

Continuous current Ith (per terminal)

Short-circuit protection

Switching frequency

Power loss

LOGO! DM8 12/24R

4

12/24 V DC

10.8 ... 28.8 V DC max. 5 V DC min. 5 V DC 8.

1.5 mA

4 relays

5 A with resistive load;

3 A with inductive load

External fuse required

2 Hz with resistive load;

0.5 Hz with inductive load

0.3 ... 1.7 W at 12 V DC

0.4 ... 1.8 W at 24 V DC

LOGO! DM8 24

DM16 24

4/8

24 V DC

20.4 ... 28.8 V DC max. 5 V DC min. 12 V DC

2 mA

4/8 transistors

0.3 A

Electronic (approx. 1 A)

10 Hz

0.8 ... 1.1 W*

0.8 ... 1.7 W**

Dimensions (W x H x D)

36 (2 MW) x 90 x 53 mm 36 (2 MW) x 90 x 53 mm

72 (4 MW) x 90 x 53 mm

LOGO! 230RC

1)

, LOGO! 230RCo

2)

8

115/240 V AC/DC

LOGO! 12/24 RCE

8

4 (0 to 10 V)

12/24 V DC

85 ... 265 V AC

100 ... 253 V DC max. 40 V AC/30 V DC min. 79 V AC/79 V DC, 0.08 mA

4 relays

10 A with resistive load;

3 A with inductive load

External fuse required

10.8 V ... 28.8 V DC max. 5 V DC min. 8.5 V DC

1.5 mA (I3 ... I6) 0.1 mA (I 1, I 2, I 7, I 8)

4 relays

10 A with resistive load;

3 A with inductive load

External fuse required

2 Hz with resistive load;

0.5 Hz with inductive load

2 Hz with resistive load;

0.5 Hz with inductive load

< 0.1 ms/function < 0.1 ms/function

Yes / typ. 80 h (2 years with battery module) Typically 20 days; no battery

LOGO! 230 RCE

8

115/240 V AC/DC

85 ... 265 V AC

100 ... 253 V DC max. 40 V AC/30 V DC min. 79 V AC/79 V DC, 0.08 mA

4 relays

10 A with resistive load;

3 A with inductive load

External fuse required

2 Hz with resistive load;

0.5 Hz with inductive load

< 0.1 ms/function

Typically 20 days; no battery

LOGO! PC cable, (RS232 or USB)

Yes

No

No

200 blocks

LOGO! memory card

No

No

No

LOGO! DM8 24R

DM16 24R

4/8

24 V AC/DC*

24 V DC**

20.4 ... 28.8 V DC, 20.4 ... 26.4 V AC* max. 5 V AC/DC min. 12 V AC/DC*

2.5 mA*, 2.0 mA**

4/8 relays

5 A with resistive load;

3 A with inductive load

External fuse required

2 Hz with resistive load;

0.5 Hz with inductive load

0.4 ... 1.8 W at 24 V DC*

0.9 ... 2.7 W at 24 V AC*

0.7 ... 2.5 W at 24 V DC**

36 (2 MW) x 90 x 53 mm

72 (4 MW) x 90 x 53 mm

On 35 mm standard mounting rail, 6 MW, or wall-mounting

108 (6 MW) x 90 x 55 mm (W x H x D)

Ethernet

No

Yes, max. 8 LOGO!s + 1PC/PG

108 (6 MW) x 90 x 55 mm (W x H x D)

Ethernet

No

Yes, max. 8 LOGO!s + 1PC/PG

Yes, max. 8 TN

(LOGO!, SIMATIC CPU, 1x SIMATIC HMI, PC)

400 blocks

SIMATIC memory card or standard SD card max. 2 G

Internal memory/SD card

Yes, with saving on the PC

Yes

Yes, max. 8 TN

(LOGO!, SIMATIC CPU, 1x SIMATIC HMI, PC)

400 blocks

SIMATIC memory card or standard SD card max. 2 G

Internal memory/SD card

Yes, with saving on the PC

Yes

LOGO! DM8 230R

DM16 230R

4/8

115/240 V AC/DC

85 ... 265 V AC, 100 ... 253 V DC max. 40 V AC min. 79 V AC

0.08 mA

4/8 relays

5 A with resistive load;

3 A with inductive load

External fuse required

2 Hz with resistive load;

0.5 Hz with inductive load

1.1 ... 3.5 W (115 V AC) ... 4.5**

2.4 ... 4.8 W (240 V AC) ... 5.5**

0.5 ... 1.8 W (115 V DC) ... 2.9**

1.2 ... 2.4 W (240 V DC) ... 4.8**

36 (2 MW) x 90 x 53 mm

72 (4 MW) x 90 x 53 mm

R: Relay outputs, C: Clock/time switch, o: without display.

E: Ethernet interface

* for DM8 module, ** for DM16 module

1) As SIPLUS component also for extended temperature range – 25 ... +70 °C and corrosive atmosphere/ condensation (www.siemens.com/siplus)

2) As SIPLUS component also for extended temperature range – 40 ... +70 °C and corrosive atmosphere/ condensation (www.siemens.com/siplus)

21

22

LOGO! modular – the technical data

Analog modules

Supply voltage

Permitted range

Analog inputs

LOGO! AM2

2)

12/24 V DC

10.8 ... 28.8 V DC

2

Measuring range

Input range

Resolution

Cable length

(shielded and twisted)

Encoder supply

Power loss at 12 V DC at 24 V DC

Dimensions (W x H x D)

0 ... 10 V or 0/4 ... 20 mA

10 bit standardized to 0 – 1000

10 m none

0.3 ... 0.6 W

0.6 ... 1.2 W

36 (2 MW) x 90 x 53 mm

2) as SIPLUS component also for extended temperature range

– 40 ... + 70 °C and corrosive atmosphere/condensation (www.siemens.com/siplus)

LOGO! AM2 RTD

12/24 V DC

10.8 ... 28.8 V DC

2 x PT100 or PT1000

2-wire or 3-wire

Automatic sensor detection

–50 ºC ... +200 ºC

0.25 °C

10 m

1.1 mA

0.3 ... 0.6 W

0.6 ... 1.2 W

36 (2 MW) x 90 x 53 mm

LOGO! AM2 AQ

2)

24 V DC

20.4 ... 28.8 V DC

2

0 ... 10 V

0 ... 10 V or 0/4 ... 20 mA

10 bit standardized to 0 – 1000

10 m

0.6 ... 1.2 W

36 (2 MW) x 90 x 53 mm

LOGO! TD Text Display

Supply voltage

Permitted range

Input

Display

Lines/characters

Length of connecting cable

Power consumption at 24 V DC

Cutout dimensions (W x H x D)

12 V DC, 24 V AC/DC

10.2 ... 28.8 V DC or 20.4 to 26.4 V AC (47 ... 63 Hz)

6 standard keys, 4 function keys (tactile-touch keys)

61 x 33 mm, white, controllable backlight, adjustable contrast

4 lines, 12/16 characters per line (depends on character set)

2.5 m (extendable to 10 m with “universal“ 9-wire standard serial cable) typ. 65 mA (12 V DC), typ. 40 mA (24 V DC), typ. 90 mA (24 V AC)

119.5 x 78.5 x 1.5 – 4.0 mm for panel mounting (128.3 x 86 x 38.7 mm total)

Communication modules (CM)

Supply voltage

Permitted range

Digital inputs*

Analog inputs*

Analog outputs*

Digital outputs*

Dimensions (W x H x D)

* Mapping to LOGO! inputs/outputs

EIB / KNX

12/24 V DC

20.4 ... 28.8 V DC

20.4 ... 26.4 V AC

16 (can also be configured as Monoflop)

8

2 (max. 8)

12

2 MW 36 x 90 x 53 mm

CM AS-Interface (slave)

24 V DC

19.2 ... 28.8 V DC

4

4

2 MW 36 x 90 x 53 mm

LOGO! ordering data

LOGO! versions

LOGO! 12/24 RCE

LOGO! 230 RCE

LOGO! 24 C

LOGO! 24 Co

LOGO! 12/24RC

LOGO! 12/24RCo

LOGO! 24RC (AC/DC)

LOGO! 24RC (AC/DC)

LOGO! 230RC

LOGO! 230RCo

LOGO! TD

Order No.

6ED1 052-1MD00-0BA7

6ED1 052-1FB00-0BA7

6ED1 052-1CC01-0BA6

6ED1 052-2CC01-0BA6

6ED1 052-1MD00-0BA6

6ED1 052-2MD00-0BA6

6ED1 052-1HB00-0BA6

6ED1 052-2HB00-0BA6

6ED1 052-1FB00-0BA6

6ED1 052-2FB00-0BA6

6ED1 055-4MH00-0BA0

Expansion modules Order No.

LOGO! DM8 24

LOGO! DM8 12/24R

6ED1 055-1CB00-0BA0

6ED1 055-1MB00-0BA1

LOGO! DM8 24R (AC/DC) 6ED1 055-1HB00-0BA0

LOGO! DM8 230R

LOGO! DM16 24

6ED1 055-1FB00-0BA1

6ED1 055-1CB10-0BA0

LOGO! DM16 24R

LOGO! DM16 230R

LOGO! AM2

LOGO! AM2 RTD

LOGO! AM2 AQ

6ED1 055-1NB10-0BA0

6ED1 055-1FB10-0BA0

6ED1 055-1MA00-0BA0

6ED1 055-1MD00-0BA1

6ED1 055-1MM00-0BA2

Communication modules Order No.

LOGO! AS-i

LOGO! EIB / KNX

3RK1 400-0CE10-0AA2

6BK1 700-0BA00-0AA2

Optional accessories Order No.

LOGO! Manual German

LOGO! Manual English

LOGO! Memory Card

LOGO! Battery Card

6ED1 050-1AA00-0AE8

6ED1 050-1AA00-0BE8

6ED1 056-1DA00-0BA0

6ED1 056-6XA00-0BA0

LOGO! Combo Memory &

Battery Card

6ED1 056-7DA00-0BA0

LOGO! Soft Comfort V 7.0

6ED1 058-0BA02-0YA1

6ED1 058-0CA02-0YE1 LOGO! Soft Comfort V 7.0

Upgrade

LOGO! PC cable

LOGO! USB PC cable

LOGO! modem cable

6ED1 057-1AA00-0BA0

6ED1 057-1AA01-0BA0

6ED1 057-1CA00-0BA0

R: Relay outputs, C: Clock/time switch, o: without display

The products listed here may be subject to the current European/German and/ or US export regulations.

LOGO! accessories

LOGO! PC cables/USB PC cables (only 0BA6)

For the simple transfer of LOGO! switching programs to and from PCs

LOGO! program module (only 0BA6)

For duplicating switching programs – and for protecting existing know-how

• Also possible for 0BA7: commercially available SD card, up to 2 GB

LOGO! Manual

For intro to LOGO!

• Detailed information on operation

• Description of all integrated functions

• Many practical application examples

• Available in 10 languages

LOGO! Power

Reliable power supply for LOGO! – for converting the line voltage of 100/240 V AC to the respective operating voltage

• Suitable for all LOGO! 12 V DC and 24 V DC

• Versions for different output currents

More information: www.siemens.com/sitop

LOGO! Contact

Hum-free switching module

• For switching resistive loads up to 20 A

• For the direct switching of motors up to 4 kW

• For powerful loads in noise-sensitive areas

More information: www.siemens.com/lowvoltage

LOGO! Prom (only 0BA6)

For replication of program modules

• For copying of modules

• For writing to modules via LOGO! Soft Comfort

More information: www.siemens.com/siplus

Front panel mounting frame

For installation in the control cabinet door

• Front IP65 (IP30 without glass)

• 4 MW or 8 MW (optional with keys)

More information: www.siemens.com/siplus

LOGO! Upmitter

For use with critical power supplies

Produces stable 24 V DC at the output with

8 to 59 V DC at the input

More information: www.siemens.com/siplus

23

Further information on LOGO! can be found on the Internet – under www.siemens.com/logo

• Comprehensive product information

• Free demonstration software

• Software upgrades

• Ready-to-use applications

• News

• Customer magazine GO!

• And much more

Of course, you can also purchase software, hardware or promotion packages for LOGO! online. In addition, on request you also find personal support under “Service and Support.” We have compiled further example applications and configuration tools for you under www.siemens.com/microset.

SIPLUS LOGO! in the Internet

www.siemens.com/siplus

You can find hardened LOGO! modules there with

• extended temperature range

• Protection against corrosive atmosphere/ condensation

Siemens AG

Industry Sector

Industry Automation

P.O. Box 48 48

90026 NUREMBERG

GERMANY

Subject to change without prior notice 03/11

Order No. E20001-A1120-P271-X-7600

Dispo 06307

WÜ/32480 MI.AS.LO.XXXX.52.1.02 03115.0

Printed in Germany

© Siemens AG 2011

The information provided in this brochure contains me re ly general descriptions or characteristics of per for m ance which in ac tual case of use do not always

ap ply as described or which may change as a result of fur ther de ve lopment of the pro ducts. An obligation to provide the respective characteristics shall only exist if ex pressly agreed in the terms of contract. All product designations may be trademarks or product na mes of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners.

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement