Catalogue Sheet: CNEXTN & CNSXTN Series

Catalogue Sheet: CNEXTN & CNSXTN Series
Type:
Project/Location:
Contractor:
Prepared By:
Date:
Model No.:
Made in Canada
TYPICAL SPECIFICATIONS
Supply and install the Ready-Lite® bilingual CNEXTN & CNSXTN Series LED Exit Sign. The equipment shall
operate with universal AC input voltage of 120 to 347VAC at less than 3W and universal two-wire DC input
voltage from 6VDC to 24VDC at less than 3.5W for single and double face signs. The frame shall be of
one-piece steel construction and have a maximum depth of 2-1/8”. The faceplate(s) shall be steel and
come standard with knockout chevrons. The equipment shall have two (2) canopies that shall fasten for
installation in ceiling-mount applications. The light source shall be light emitting diodes (LED). The LED lamps
shall provide illumination in normal and emergency operation and shall be mounted inside the exit housing.
Red LED technology shall be ALINGAP. An LED-sensitive diffuser shall be mounted behind the legend to
provide the 6” high by 3/4” stroke letters with even illumination.
The Exit Sign in a Self-powered configuration shall stay illuminated during emergency operation for at least
minutes upon AC failure.
The Exit Sign shall be CSA-C860 approved and meets CSA 22.2 No.141.
The equipment shall be Ready-Lite® Model:
.
WIRE GUARDS
460.0059-RL
wall mount
460.0092-RL
ceiling mount
DIMENSIONS
Dimensions are approximate and subject to change.
CNEXTN & CNSXTN
SERIES
Bilingual Steel Sign
FEATURES
• Single illumination module lights both
single and double face Exit Signs
• Highly energy efficient – consumes a
maximum of 5.5W in AC or DC mode
• Normal AC and emergency DC
operation – 120 to 347V AC input;
6 to 24V DC input
• Meets or exceeds CSA 22.2 No. 141
requirements.
7-3/8” [19 cm]
CNEXTN SERIES
28-5/8” [73 cm]
CNSXTN SERIES
7-3/8” [19 cm]
7-1/2” [19 cm]
8-3/4” [22 cm]
4-5/8” [12 cm]
2-1/8” [5 cm]
28-5/8” [73 cm]
POWER CONSUMPTION AND UNIT RATING
MODEL
AC SPECS
DC SPECS
AC/DC standard
120 to 347VAC
less than 3W
6 to 24VDC
less than 3.5W
AC/special DC
120/277/347VAC
less than 5W
36 or 48 or 120VDC
less than 5W
self-powered
120 to 347VAC
less than 6W
nickel-cadmium battery
min. 60 or 120 minutes
ORDERING INFORMATION
LETTERING
CNEXTN= exit sortie 6” letters
CNSXTN= sortie exit 6” letters
FACES
11= single face
12= double face
COLOUR
WH= factory white
BK= black
GY= textured grey
VOLTAGE
-LU= 120 to 347VAC, 6 to 24 VDC
-LI20-2W= 120VAC, 120VDC, 2 wires
-LU36= 120/277/347VAC - 36VDC
-LU48= 120/277/347VAC - 48VDC
-LU120= 120/277/347VAC - 120VDC
-ISP= self-powered, 120 to 347VAC (60 mins.)
-ISP2= self-powered, 120 to 347VAC (120 min.)
OPTIONS
Blank= 2 canopies supplied
TP= tamper-proof screws*
VRTP= vandal resistant shield with
tamper- proof screws*
3C= 3 canopies
*990.0119-RL= T
amper-proof bit (sold separately)
EXAMPLE: CNEXTN11WH-LU
45
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement