advertisement
PROGRAMMER
ACC0432
EZ
Thermostat
Programmer
Allows quick and easy copying from one thermostat to the next
Choose from clock, time period programming, or all data copy
Battery backup keeps the clock and day of the week current
Stores data from several models simultaneously
Compatible with thermostat models:
T1700, T1800, T1900, T2700, T2800 T2900
Consult VENSTAR for a complete list.
OWNER’S
MANUAL
Venstar Inc. 08/07
Overview
This unique accessory will allow you to copy stored information from a thermostat. Then the information may be loaded into other thermostats, without the need to manually enter each item.
With the EZ Programmer your options are:
Copy all data from a thermostat (time, day of
week, time period programming, and advanced
setup information).
Load just the time and day of week to
a thermostat.
Load just the time period programming
to a thermostat.
Load all data to a thermostat (time, day of week,
time period programming, and advanced setup
information).
Page 2
Overview
The EZ Programmer has a unique location in its memory to store data from each thermostat model that it is compatible with.
The EZ Programmer will automatically recognize the thermostat model that it is connected to and upload the correct data for that model.
The EZ Programmer over writes only the existing data for the model being downloaded. All other models’ data is untouched.
Examples of how this programmer can be used include:
Extract programming data from a thermostat
in the shop and upload it to thermostat(s) in
the field.
An easy way to make the same program
changes on multiple thermostats at the same
location.
An easy way to change the time on multiple
units.
Page 3
Connection
PLATINUM eries
COMMERCIAL PROGRAMMABLE THERMOSTAT
I2:00
Su
Pm
AUTO
74
C
OOL
H EAT 72
MODE HUMIDITY
SET CLOCK
FAN PROGRAM HOLIDAY
OUTDOOR
OVERRIDE
The accessory connector of the programmer is inserted into the accessory jack.
Accessory release button
Accessory jack located on thermostat bottom
Accessory connector
The LED will glow green when connected to a compatible thermostat
To release the programmer from the thermostat: press and hold the accessory release button on the front panel of the thermostat, while pressing the release button, remove the programmer.
Page 4
Connection - LED codes
PLATINUM eries
COMMERCIAL PROGRAMMABLE THERMOSTAT
I2:00
Su
Pm
AUTO
74
C
OOL
H EAT 72
MODE HUMIDITY
SET CLOCK
FAN PROGRAM HOLIDAY
OUTDOOR
OVERRIDE
After the accessory connector of the programmer is inserted into the accessory jack of a compatible thermostat:
The LED will flash red a number of times based on the model of the thermostat it recognizes.
Reconnect, if the red/green
LED does not flash at all.
Red/Green LED
1 flash = T2700
2 flashes = T2800
3 flashes = T2900
4 flashes = T1700
5 flashes = T1800
6 flashes = T1900
The LED will turn green when the programmer is ready to continue.
The LED will turn red during operation and back to green when finished.
CAUTION
Do not remove the Ez Programmer from the
thermostat while the LED is red. If the LED is red longer than 3 seconds, remove it from the thermostat as this is an abnormal condition.
In this case let the programmer sit 5 seconds, then reconnect and retry the previous operation.
Page 5
Buttons
ALL
This button, when pressed, will copy (download) all the stored data from the connected thermostat to the programmer. The LED will turn red, then will turn green when complete.
TIME
PERIOD
This button, when pressed, will copy (upload) the time period programming from the programmer to the connected thermostat.
The LED will turn red, then turn green when complete.
CLOCK
ONLY
This button, when pressed, will copy (upload) the time & day of week from the programmer to the connected thermostat.
The LED will turn red, then will turn green when complete.
See note on page 9.
ALL
This button, when pressed, will copy (upload) all the stored data from the programmer to the connected thermostat.
The LED will turn red, then turn green when complete.
Page 6
Operation - Copy All Data
To upload All data programming:
ALL
This button, when pressed, will copy (upload) all the stored data from the programmer to the connected thermostat.
The LED of the programmer will turn red, then turn green when copying is complete.
To download All data:
ALL
This button, when pressed, will copy (download) all the stored data from the connected thermostat to the programmer.
The LED of the programmer will turn red, then turn green when copying is complete.
Page 7
Operation - Copy Time Period Programming
To upload Time Period programming:
This button, when pressed will copy (upload) all the time period data from the programmer to the connected thermostat.
The LED of the programmer will turn red, then turn green when copying is complete.
TIME
PERIOD
Page 8
Operation - Copy Time & Day of Week
To upload Time & Day of Week:
This button, when pressed, will copy (upload) the time & day of the week from the programmer to the connected thermostat.
The LED of the programmer will turn red, then turn green when copying is complete.
Note: If connected to a thermostat that does not have a clock, the programmer will not try to transfer the clock information. In this case the LED will not flash red.
Page 9
Factory Defaults & Battery Installation/Replacement
To completely erase all of the contents of the programmer and restore it to its factory default values, insert a paperclip into this hole and depress the small reset switch.
Screw holding the battery cover.
To replace the battery:
Remove the screw holding the battery cover.
Slide off the battery cover
& replace it with a CR-2032, or equivalent battery.
The internal clock will need to be reset after replacing the battery.
To do this, connect the programmer to a compatible thermostat with a clock and day of the week display.
Confirm the current day and time, then press
ALL
Page 10
Table - Data Transferred, by Model
Description T1700
Time of day
Day of week
F or C readout
Programmable
Auto Changeover
Dead band 1
Dead band 2
Dead band 3
2nd stage timer
3rd stage timer
2nd stage turn off pt.
Cycle limit
Forced differential
Fan off delay
Back light
Keypad Lock
Prog. Fan runtime
Prog. Fan start
Prog. Fan stop
Balance point
# of occupied period s
Security level
Heat set limit
Cool set limit
Filter runtime set
UV runtime set
Humid. runtime set
Time period info.
Vacation w/set points
Holiday w/set points
Occupied set points
Unocc. set points
1, 3
3
3
3
3
3
3
3
3
3
3
3
3
3
2, 3
Preoccupancy purge
T1800
1, 3
1, 3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
2, 3
3
T1900
1, 3
1, 3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
2, 3
3
T2700
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
2, 3
T2800
1, 3
1, 3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
2, 3
3
3
3
3
3
2, 3
T2900
3
3
3
3
3
3
3
3
1, 3
1, 3
3
3
3
3
3
3
2, 3
3
3
3
3
3
3
2, 3
3
3
3
2, 3
2, 3
3
2, 3
2, 3
3
Table Legend:
1= The data that is transferred when the Clock button is pressed.
2= The data that is transferred when the Time Period button is pressed.
3= The data that is transferred when the All button is pressed.
Page 11
Warranty
One-Year Warranty - This Product is warranted to be free from defects in material and workmanship.
If it appears within one year from the date of original installation, whether or not actual use begins on that date, that the product does not meet this warranty, a new or remanufactured part, at the manufacturer’s sole option to replace any defective part, will be provided without charge for the part itself provided the defective part is returned to the distributor through a qualified servicing dealer.
THIS WARRANTY DOES NOT INCLUDE LABOR OR OTHER COSTS incurred for diagnosing, repairing, removing, installing, shipping, servicing or handling of either defective parts or replacement parts.
Such costs may be covered by a separate warranty provided by the installer.
THIS WARRANTY APPLIES ONLY TO PRODUCTS IN THEIR ORIGINAL INSTALLATION LOCATION AND
BECOMES VOID UPON REINSTALLATION.
LIMITATIONS OF WARRANTIES – ALL IMPLIED WARRANTIES (INCLUDING IMPLIED WARRANTIES OF FITNESS
FOR A PARTICULAR PURPOSE AND MERCHANTABILITY) ARE HEREBY LIMITED IN DURATION TO THE PERIOD
FOR WHICH THE LIMITED WARRANTY IS GIVEN. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE MAY NOT APPLY TO YOU. THE EXPRESSED
WARRANTIES MADE IN THIS WARRANTY ARE EXCLUSIVE AND MAY NOT BE ALTERED, ENLARGED, OR
CHANGED BY ANY DISTRIBUTOR, DEALER, OR OTHER PERSON WHATSOEVER.
ALL WORK UNDER THE TERMS OF THIS WARRANTY SHALL BE PERFORMED DURING NORMAL WORKING
HOURS. ALL REPLACEMENT PARTS, WHETHER NEW OR REMANUFACTURED, ASSUME AS THEIR WARRANTY
PERIOD ONLY THE REMAINING TIME PERIOD OF THIS WARRANTY.
THE MANUFACTURER WILL NOT BE RESPONSIBLE FOR:
1. Normal maintenance as outlined in the installation and servicing instructions or owner’s
manual, including filter cleaning and/or replacement and lubrication.
2. Damage or repairs required as a consequence of faulty installation, misapplication, abuse,
improper servicing, unauthorized alteration or improper operation.
3. Failure to start due to voltage conditions, blown fuses, open circuit breakers or other
damages due to the inadequacy or interruption of electrical service.
4. Damage as a result of floods, winds, fires, lightning, accidents, corrosive environments or
other conditions beyond the control of the Manufacturer.
5. Parts not supplied or designated by the Manufacturer, or damages resulting from their use.
6. Manufacturer products installed outside the continental U.S.A., Alaska, Hawaii, and
Canada.
7. Electricity or fuel costs or increases in electricity or fuel costs for any reason whatsoever
including additional or unusual use of supplemental electric heat.
8. ANY SPECIAL INDIRECT OR CONSEQUENTIAL PROPERTY OR COMMERCIAL
DAMAGE OF ANY NATURE WHATSOEVER. Some states do not allow the exclusion of
incidental or consequential damages, so the above may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.
Page 12
P/N 88-626 Rev. 1
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project