Avtec Eco Arch Specification Sheet EA2000

Avtec Eco Arch Specification Sheet EA2000
r Line
Low Volume Exhaust
Canopy for Use
Over 400°F & 600°F
Cooking Equipment
EcoArch Energy Efficient Ventilation EA2000 model EA2
™
Description:
The EA2 model exhaust only canopy is UL 710 Listed
for use over 400 and 600˚F commercial cooking
appliances. This non compensating high exhaust
velocity style canopy is intended for use over light
and heavy-duty types of cooking appliances and
is recommended for all projects where energy
consumption is a factor or when adequate make up air
is not available from the heating and cooling system.
Specifications:
Model EA2 exhaust only type I commercial kitchen ventilation canopy UL 710 Listed without a fire damper in the exhaust collar.
Canopy is constructed of a minimum 18 gauge, high grade, corrosive resistant, non-magnetic stainless steel on all surfaces. Top
of canopy to be constructed to incorporate exclusive aerodynamic arch. All exterior
joints and seams shall be continuously welded
54”-66”
liquid
tight,
ground
smooth,
and
polished
to
match
the
original
finish.
Construction
to
conform to NFPA 96 standards and shall meet
4’-16’
UL 710 standards for operation. Canopy is constructed using the standing seam method for optimum strength. Exhaust Canopy shall
be complete with stainless steel removable grease extractors running the full length of canopy. Grease extraction is accomplished
by way of front located high velocity exhaust slot running the full length at the top of hood through grease filters. Grease filters are
removable through exhaust plenum access doors. Grease trough is concealed within the hood and slopes to a removable grease cup
located at the end of the front exhaust canopy. Canopy comes complete with UL Listed fluorescent light fixtures.
Standard Features:
• High grade, corrosive resistant, non-magnetic
stainless steel construction on all surfaces
• UL Listed fluorescent light fixtures
• 3” Rear air space
• Full length concealed grease trough
pitched to a removable grease cup
• Pre-drilled hanger brackets
• Stainless steel grease extractors
• Exclusive aerodynamic arch
• Front mounted exhaust plenum
• Front located high velocity exhaust slot
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
Optional accessories:
Insulated 3” air space
Pre-plumbed fire suppression 8.0
Fire suppression complete installation
Stainless steel top ceiling enclosures
Utility fire system cabinet, mounted on end of hood
Fan/light switches
Stainless steel wall panel
Exhaust fan / cooking equipment interlock control
UL Listed exhaust volume damper available on
units with (2) or more exhaust collars
Melink Intelli-Hood® system controls
Avtec EcoArch Ventilation, Page 1
PP SPEC1001 Rev. E
Revised 05/09
Center Line
Model EA2
54”-66”
4’-16’
8.0
PLAN VIEW
Center Line
CROSS SECTION VIEW
54”-66”
4’-16’
ELEVATION VIEW
4’-0”
5’-0”
6’-0”
7’-0”
8’-0”
9’-0”
10’-0”
11’-0”
12’-0”
13’-0
14’-0”
15’-0”
16’-0”
Light Duty 400ºF Cooking Equipment
Exhaust CFM
Single Collar
CFM @
Duct
.875 SP
Collar
560
8x6
700
8x8
840
8 x 10
980
8 x 10
1120
8 x 12
1260
8 x 14
1400
8 x 16
1540
8 x 18
1680
8 x 18
1820
8 x 20
1960
8 x 22
2100
8 x 24
2240
8 x 26
Double Collar
CFM @
Duct
. 875” SP
Collar
560
8x6
700
8x8
840
8 x 10
980
8 x 10
1120
8 x 12
1125
(2) 8 x 6
1250
(2) 8 x 8
1375
(2) 8 x 8
1500
(2) 8 x 8
1625
(2) 8 x 10
1750
(2) 8 x 10
1875
(2) 8 x 10
2000
(2) 8 x 12
Medium and Heavy Duty 600ºF Cooking
Equipment Exhaust CFM
Single Collar
CFM @
Duct
1.125” SP
Collar
720
8x8
900
8 x 10
1080
8 x 12
1260
8 x 14
1440
8 x 16
1620
8 x 18
1800
8 x 20
1980
8 x 22
2160
8 x 24
2340
8 x 26
2520
10 x 22
2700
10 x 24
2880
10 x 26
Double Collar
CFM @
Duct
1.125” SP
Collar
720
8x8
900
8 x 10
1080
8 x 12
1260
8 x 14
1440
8 x 16
1485
(2) 8 x 8
1650
(2) 8 x 8
1815
(2) 8 x 10
1980
(2) 8 x 12
2145
(2) 8 x 12
2310
(2) 8 x 12
2475
(2) 8 x 14
2640
(2) 8 x 14
Extra Heavy Duty 700ºF
Cooking Equipment
Exhaust CFM
CFM @
1.375 SP
1400
1750
2100
2450
2800
3150
3500
3850
4200
4550
4900
5250
5600
Duct Collar
8 x 16
8 x 20
8 x 24
10 x 22
10 x 26
(2) 8 x 18
(2) 8 x 20
(2) 8 x 22
(2) 8 x 24
(2) 8 x 26
(2) 10 x 22
(2) 10 x 24
(2) 10 x 26
Note: Depending on building conditions greater exhaust air flow rates may be required for each specific installation in order to obtain complete vapor and
smoke removal. UL710 Listing information is available upon request.
Note: Exhaust collar sizing is based on an average range of 1600 FPM. Duct collars are located on centerline of canopy, unless otherwise specified.
Hoods with Double exhaust collar are located on ¼ lines of canopy unless otherwise specified. Canopy is to have a minimum 6” overhang on all exposed
sides of cooking equipment.
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.
NFPA-96
Length
8.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement