Clarion CMD8 Owner's Manual & Installation Manual

Add to My manuals
19 Pages

advertisement

Clarion CMD8 Owner's Manual & Installation Manual | Manualzz
Owner's manual & Installation manual
Mode d'emploi et manuel d'installation
Manual de instrucciones y de instalación
CMD8
WATERTIGHT MARINE CD/USB/MP3/WMA RECEIVER
LECTEUR MARINE ÉTANCHE CD/USB/MP3/WMA
RECEPTOR CD/USB/MP3/WMA MARINO, HERMÉTICO
English
Contents
Thank you for purchasing this Clarion product.
• Please fully read this owner’s manual before operating this equipment.
• Check the contents of the enclosed warranty card and store it in a safe place with this manual.
1. FEATURES........................................................................................................................ 3
2. PRECAUTIONS................................................................................................................. 3
Front Panel / Generalities............................................................................................... 4
USB Port......................................................................................................................... 4
3. CONTROLS....................................................................................................................... 4
Operational Panel........................................................................................................... 4
Names of Buttons............................................................................................................ 4
Notes for use of Optional Remote Control...................................................................... 5
Remote Control (RCX001: Sold separately)................................................................... 5
Optional Wired Remote Control Unit Operations............................................................ 6
4. CAUTIONS ON HANDLING.............................................................................................. 7
Handling Discs................................................................................................................ 7
5. OPERATIONS.................................................................................................................... 7
Basic Operations............................................................................................................. 7
System Setup.................................................................................................................. 8
Audio Setup..................................................................................................................... 8
Radio Operations............................................................................................................ 9
SiriusXM Satallite Radio Operations............................................................................... 9
CD/MP3/WMA Operations............................................................................................ 11
USB Operations............................................................................................................ 12
iPod & iPhone Operations............................................................................................. 12
AUX Operations............................................................................................................ 13
6. TROUBLE SHOOTING.................................................................................................... 14
7. ERROR DISPLAYS......................................................................................................... 15
8. SPECIFICATIONS........................................................................................................... 15
9. INSTALLATION / WIRE CONNECTION GUIDE............................................................. 16
2
CMD8
Compatible with iPod® / iPhone® with Pandora® internet radio App
SiriusXM-Ready™
4ch RCA Output and BEAT-EQ with 3 Band Parametric Equalizer
2.Driving on extremely bumpy surface can
cause the disc to skip during playback.
Expanding audio features
3.This unit uses precision parts and
components for its operation. In the event
that trouble arises, never open the case,
disassemble the unit, or lubricate the
rotating parts. Contact your Clarion dealer
or service center.
4 Channel Amplifier
USB Memory
iPod/iPhone
(Connect via USB)
WARNING
For your safety, the driver should not operate the controls while driving.
Also, while driving, keep the volume to a level at which external sounds can be heard.
1.When the interior of the boat is extremely
cold and the player is used soon after
switching on the heater, moisture may
form on the disc or the optical parts of the
player and proper playback may not be
possible. If moisture forms on the disc,
wipe it off with a soft cloth. If moisture
forms on the optical parts of the player,
do not use the player for about one hour.
The condensation will disappear naturally
allowing normal operation.
Expanding Systems
SiriusXM-Connect™
Vehicle Tuner
Note:
• The items listed only show connectivity options and are not included with the unit.
• CCA-750 : Sold separately.
English
2. PRECAUTIONS
1. FEATURES
4.T his equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and
can radiate radio frequency energy and,
if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio reception,
which can be determined by turning
the equipment off and on, the user is
encouraged to consult the dealer or an
experienced radio technician for help.
5.“Made for iPod,” and “Made for iPhone”
mean that an electronic accessory has
been designed to connect specifically to
iPod, or iPhone, respectively, and has
been certified by the developer to meet
Apple performance standards.
Apple is not responsible for the operation
of this device or its compliance with safety
and regulatory standards. Please note
that the use of this accessory with iPod or
iPhone may affect wireless performance.
iPhone and iPod are trademarks of Apple
Inc., registered in the U.S. and other
countries.
6.P andora, the Pandora logo and other
Pandora marks are trademarks or
registered trademarks of Pandora Media,
Inc. or its subsidiaries worldwide.
“If you have any issues with the Pandora application on your mobile phone, please
direct them to pandora-support@pandora.
com.”
7.SiriusXM and all related marks and logos
are trademarks of SiriusXM Radio, Inc. All
rights reserved.
CMD8
3
English
Cleaning the body
CMD8
TX-1140B-A
P/N:127071003507
• Use a soft, dry cloth and gently wipe off
any dirt or dust.
• For tough dirt, apply some neutral
detergent diluted in water to a soft cloth,
wipe off the dirt gently, then wipe again
with a dry cloth.
• Do not use benzene, thinner, boat cleaner,
etc., as these substances may damage
the body or cause the paint to peel. Also,
leaving rubber or plastic products in
contact with the body for long periods of
time may cause stains.
3. CONTROLS
Operational Panel
[OPEN]
[DISC]
[SAT]
[AM/FM]
[AUX/iPod]
[MENU]
[ ]
[ENTER]
[RETURN]
[POWER]
[AUDIO]
[DISPLAY]
[OPTION]
[ ], [ ]
[ADJUST]
IR-Receiver
[VOLUME]
USB Port
INFORMATION FOR USERS:
Changes or modifications to this product
unapproved by the manufacturer will void the
warranty and will violate FCC approval.
Front Panel / Generalities
For a longer service life, be sure to read the
following cautions.
• Do not allow any liquids on the unit from
drinks, umbrellas, etc. Doing so may
damage the internal circuitry.
• Do not disassemble or modify the unit in
any way. Doing so may result in damage.
• Do not let cigarettes burn the display.
Doing so may damage or deform the
body.
• If a problem should occur, have the unit
inspected at your store of purchase.
• The remote control unit may not work if
the remote control sensor is exposed to
direct sunlight.
4
CMD8
•T h e U S B m e m o r y s t i c k s m u s t b e
recognized as “USB mass storage class”
to work properly. Some models may not
operate correctly.
When the memorized data is lost or
damaged by any chance, Clarion shall
not be liable for any damage.
When using the USB memory stick, we
recommend that you backup your data
stored on it before using a personal
computer etc.
•Data files may be broken when using USB
memory sticks in the following situation:
When disconnecting the USB memory
stick or turning the power off during
reading data.
When affected by static electricity or
electric noise.
Connect/disconnect the USB memory stick
when it is not accessed.
•C onnecting with the computer is not
covered.
[UP/DOWN]
With the front panel opened
[CD SLOT]
[RESET]
[ ]
Names of Buttons
[POWER] button
•Press the button to turn on or off the power.
[AUDIO] button
•Press the button to enter the audio adjust
mode.
[DISPLAY] button
•P r e s s t h e b u t t o n t o s w i t c h t h e d i s p l a y
indication.
[OPTION] button
•Press the button to enter the option mode.
[ADJUST] button
• Press the button to enter the adjust mode.
[VOLUME] knob
• Adjust the volume by turning the knob.
[DISC] button
•Use to switch to CD/MP3/WMA mode.
[AUX/iPod] button
•Use to switch to USB/iPod/Pandora mode or
AUX mode.
[OPEN] button
•Open the panel by pressing the “ Clarion ”
oval latch button. Audio will mute with the front
panel open.
[AM/FM] button
• Use to switch to Radio mode.
• Switch the band.
[SAT] button
• Use to switch to SiriusXM mode.
• Switch the band.
•Press and hold the button to enter the Category
Browsing mode.
Names of Buttons
[
] button
•Play or pause.
• Turn the mute on/off.
[ENTER] button
• Confirm (press)
• P
andora mode - Bookmark Track /
Bookmark Artist (long press)
[RETURN] button
•Press the button to return to the previous
mode in some adjust operations.
[ ], [ ] (Search) buttons
•Select a station while in the Radio mode
/ SiriusXM mode or select a track while in
CD/MP3/WMA mode.
•Press and hold the button for (1 sec.) to
switch to fast-forward/fast-reverse.
• P
andora mode - [ ] Thumbs Up, [ ]
Thumbs down / [ ] Skip (long press)
[IR RECEIVER]
•Receiver for optional IR remote control
unit.
(Operating range: 30° in all directions)
[UP/DOWN] knob
•Select folders while in MP3/WMA/USB
mode.
•Select previous/next preset station in
Radio/SiriusXM mode.
[CD SLOT]
•CD insertion slot.
[ ] (Eject) button
•Eject a CD when it is loaded into the
unit.
[RESET] button
•Press the button when the following
symptoms occur.
*N othing happens when buttons are
pressed.
*Display is not accurate.
*The settings will remain in the memory
even if you turn the power off or press
the reset button.
[SRC / ] Button
• Toggle the audio source
•Power on / Power off (long press)
,
] Buttons
[
• R
adio mode - Preset station up or down /
Search (long press)
• Previous / next track
• S
iriusXM mode - Preset up or down / Rapid
tune (long press)
•Pandora mode – Station up-down / skip track
] long press)
([
[SCN/PS/AS] Button
•Scan play / Preset scan
•Auto memory store (long press)
• Pandora mode – Thumbs down
•SiriusXM mode– Channel scan (in current
category) / Preset scan (long press)
[BAND/TOP] Button
•CD/MP3/WMA/USB mode – Top play
•RADIO mode – Select tuner band
•SiriusXM mode – Select tuner band /
Category Browsing mode (long press)
[ , ] Buttons
• Volume up / down
English
[MENU] button
• RADIO mode - Preset mode
• CD/MP3 mode - Folder search
• USB mode - Folder search
• iPod mode - iPod Menu / Top Menu (long
press)
• Pandora mode - Station select
•SiriusXM mode - Preset mode / Direct Tune
(Long Press)
Remote Control (RCX001: Sold separately)
[RPT] Button
• Repeat play
•Pandora mode – Bookmark track /
Bookmark Artist (long press)
[MUTE] Button
• Mute the volume
[SRC /
[
,
]
[BAND/TOP]
[
,
]
[
]
]
[MUTE]
[SCN/
PS/AS]
[ISR]
[DISP]
[RDM ]
[RPT ]
[
] Button
• Play / Pause
Notes for use of Optional Remote Control
1.Aim the remote control at the remote sensor
on the unit.
2.Remove the battery from the remote control
or insert a battery insulator if the battery has
not been used for a month or longer.
3.D O NOT store the remote control under
direct sunlight or in high temperature
environment, or it may not function properly.
4.U s e “ b u t t o n s h a p e d ” l i t h i u m b a t t e r y
“CR2025” (3V) only.
5.D O NOT subject battery to recharge,
disassemble, heat or dispose in fire or
water.
6.I nsert the battery in proper direction
according to the (+) and (-) polarities.
7.Store the battery in a place where children
cannot reach to avoid the risk of accident.
Inserting the Battery
1.Slide remote control unit’s rear cover in
the direction shown.
2.I nsert battery (CR2025) into insertion
guides with printed side (+) up.
3.Press battery into compartment as shown.
4.Replace and slide cover until it clicks into
place.
[ISR] Button
•Recall ISR station stored in memory and
store current station in ISR memory (long
press)
[DISP] Button
• Display switch
[RDM] Button
• Random play
• Pandora mode – Thumbs up
Insertion guide
CMD8
5
English
Optional Wired Remote Control Unit Operations
Optional Wired Remote Control Unit Operations
Following operations are enabled by remote control with the separately sold Wired Remote Control Unit
MW1 (shown below) or MW4.
[ ], [ ] buttons
•RADIO mode – Preset station up / down
•USB mode – Select (in Folder search mode)
• iPod mode – Select (in Menu mode)
•AUX mode – No function
•Pandora mode – Thumbs up ( ) / Thumbs
down(
) / Select Serch mode / Select
station(in Search mode)
•SiriusXM mode – Preset channel up-down
/ Category up-down (in Category mode) /
Numeric up-down (Direct mode)
Note:
If the remote control is connected with this unit while the power on, please restart this unit again to
confirm the normal display.
[
]
IR-Receiver
[ /SOURCE]
[ENTER]
[
]
[ /SOURCE] button
/SOURCE] button to turn the
•Press the [
power on and press and hold it (1 sec.) to
turn the power off.
/SOURCE] button is
•Each time the [
pressed, the mode switches.
Note:
• I f the above equipment is not connected,
corresponding mode cannot be selected.
[
]
[ ], [ ]
[ ], [
[MENU/BAND]
]
CAUTION
Lower the volume level before powering
the source unit off. The source unit
stores the last volume setting.
WARNING
EXPOSING THE UNIT TO WATER
WITH THE FRONT PANEL OPEN
WILL CAUSE DAMAGE OR UNIT
MALFUNCTION!
6
CMD8
[ENTER] button
•RADIO mode – No function
•USB mode – Confirm (in Menu mode)
•iPod mode – Confirm (in Menu mode)
•AUX mode – No function
• Pandora mode – Bookmark Track / Bookmark
Artist (long press) / Confirm (in Menu mode)
•SiriusXM mode – Confirm ch (in Search
mode)
[ ], [ ] buttons
•Press the [ ] button to increase the volume.
•Press the [ ] button to decrease the volume.
[ ], [ ] buttons
•RADIO mode – Station up-down /Seek up down (long press)
•USB mode – Previous - next track / Fast
forward-reverse (long press)
•iPod mode – Previous - next track / Fast
forward-reverse (long press)
•AUX mode – No function
•P
andora mode – Station up - down / skip
track ( : Long press)
•SiriusXM mode – Station up - down / Rapid
tune up-down – (Long press) / Move cursor
(direct mode) / Channel up - down in current
category (Category mode)
[MENU/BAND] button
•Each time the button is pressed, the band
switches in the following order:
Radio : FM1 -> FM2 -> FM3 -> AM ->
FM1.....
SiriusXM : SXM1 -> SXM2 -> SXM3 ->
SXM1.....
•Press and hold the button to enter the
Category Browsing mode. (in SiriusXM
mode.)
•Press and hold the button, it will start from
the first track. (in CD/MP3/WMA and USB
modes)
•Press the [MENU] button to enter the list
search mode. (in CD/MP3/WMA and USB
modes)
[
] button
•RADIO mode – Mute ON-OFF
•USB mode – Play-Pause
•iPod mode – Play-Pause
•AUX mode – No function
•Pandora mode – Play-Pause
IR-Receiver
•Receiver for optional IR remote control unit.
(Operating range: 30° in all directions)
5. OPERATIONS
Handling Discs
Basic Operations
Note:
Handling
Storage
• New discs may have some roughness
around the edges. If such discs are used,
the player may not work or the sound may
skip. Use a ball-point pen or the like to
remove any roughness from the edge of
the disc.
• Do not expose discs to direct sunlight or
any heat source.
• Do not expose discs to excess humidity or
dust.
• Do not expose discs to direct heat from
heaters.
Ball-point pen
Roughness
Cleaning
• To remove fingermarks and dust, use a soft
cloth and wipe in a straight line from the
center of the disc to the circumference.
• Do not use any solvents, such as
commercially available cleaners, anti-static
spray, or thinner to clean discs.
• After using special disc cleaner, let the disc
dry off well before playing it.
On Discs
• Never stick labels on the surface of the disc
or mark the surface with a pencil or pen.
• Never play a disc with any cellophane tape
or other glue on it or with peeling off marks.
If you try to play such a disc, you may not
be able to get it back out of the player or it
may damage the player.
• Do not use discs that have large scratches,
are misshapen, cracked, etc.
Use of such discs may cause misoperation
or damage.
• To remove a disc from its storage case,
press down on the center of the case and
lift the disc out, holding it carefully by the
edges.
• Do not use commercially available disc
protection sheets or discs equipped with
stabilizers, etc. These may damage the
disc or cause breakdown of the internal
mechanism.
• Never turn off the power and remove the
unit from the boat with a disc loaded.
•Refer to the diagrams in “3. CONTROLS”
when reading this chapter.
CAUTION
Volume adjustment
Rotate the [VOLUME] knob on the front panel
or press the [ ] or [ ] button on the remote
control.
The adjustable range of volume is 0 to 40.
When the unit is turned on, starting and
stopping the engine with its volume raised to
the maximum level may harm your hearing.
Be careful about adjusting the volume.
While driving, keep the volume level at
which external sounds can still be heard.
Power on / off
Playing source selection
Notes:
• Start the engine before using this unit.
• Be careful about using this unit for a long
time without running the engine. If you
drain the battery too far, you may not be
able to start the engine and this can reduce
the service life of the battery.
1. Start the engine. The power button / knob
illumination on the unit will light up.
Engine ON
position
CAUTION
For your safety, the driver should not insert
or eject a disc while driving.
English
4. CAUTIONS ON HANDLING
2. Press the [POWER / ] button on the front
panel or the [SRC /
] remote control to
turn on the power under standby mode.
The unit goes back to the last status after
power on.
3. Press and hold the [POWER /
] button
on the front panel or the [SRC / ] remote
control to turn off the power.
CAUTION
Press the [DISC], [AUX/iPod], [AM/FM] or
[SAT] button to change the operation mode.
*iPod or iPhone can connect to this unit via
CCA-750 cable.
Display system time
Press the [DISPLAY] button on the front
panel or the [DISP] remote control to switch
the display information from clock, station
information (radio mode), or track information
(CD mode).
RESET
If you have following problems, please press
[RESET] button.
• Unit can not power on
• Nothing happens when buttons are pressed
• Display is not accurate
Note:
*When the [RESET] button is pressed, preset
radio stations, audio setting, etc.stored in
memory are retained.
Mute
Press the [MUTE] button on the remote control
to mute the volume from the unit.
Note:
Doing the operation above again or adjusting
volume will release muting.
RESET
CMD8
7
English
System Setup
To change adjustment setting
1.Press the [ADJUST] button to switch to
the adjustment selection display.
2.Press the [ ] or [ ] button to select the
“item name”.
CLOCK, DX/LO, SCRN SVR, SCROLL,
REAR/S-W, SW PHASE, Pandora,
DIMMER, CONTRAST, BEEP, 12/24H,
RESET
3.Rotate the [UP/DOWN] knob to select the
“desired setting value”.
*In the case of display blinking “ENT”, you
can press the [ENTER] button to adjust
the setting value.
4.A fter completing settings, press the
[ADJUST] or [RETURN] button to return to
the previous mode.
CLOCK
1. Press the [ENTER] button.
2.Press the [ ] or [ ] button to select the
hour or the minute.
3.R otate the [UP/DOWN] knob to set the
correct time.
*The clock is displayed in 12-hour format
by default.
4.Press the [ENTER] button to store the time
into memory.
Note:
• You cannot set the clock when it is
displayed with only the ignition on. If you
drain or remove the boat’s battery or take
out this unit, the clock is reset. While
setting the clock, if another button or
operation is selected, the clock set mode
is canceled.
DX/LO (RADIO mode)
Rotate the [UP/DOWN] knob to choose radio
local or distant at RADIO mode.
• LO: Only stations with strong signal can
be received.
• DX: Stations with strong and weak signals
can be received.
8
CMD8
System Setup
SCRN SVR: ON/OFF
Rotate the [UP/DOWN] knob to choose
SCRN SVR (screen saver) ON or OFF.
BEEP: ON/OFF
Rotate the [UP/DOWN] knob to choose button
beep sound ON or OFF.
SCROLL: ON/OFF
For track information that is longer than the
display panel:
When SCOLL is ON, the LCD will scroll the
ID3 TAG information across the display, e.g.:
TRACK->FOLDER->FILE->ALBUM->TITLE>ARTIST->TRACK->...
When SCROLL is OFF, the LCD will display
one of the ID3 TAG information, the default
is TRACK, but user can adjust it to other
ID3 TAG information by pressing [DISPLAY]
button.
12/24H
Rotate the [UP/DOWN] knob to choose time
format: 12 HOURS or 24 HOURS.
REAR/S-W
Rotate the [UP/DOWN] knob to choose
REAR or S-WOOFER (SUB-WOOFER).
SW PHASE
Rotate the [UP/DOWN] knob to choose
SUBWOOFER phase REVERSE or
NORMAL.
Pandora: ON/OFF
Select OFF if the Pandora application has
not been installed on your iPod touch or
iPhone.
DIMMER: ON/OFF
Rotate the [UP/DOWN] knob to choose
DIMMER ON or OFF.
• ON:LCD dimmer is active when small
light of vehicle is turned ON.
• OFF:LCD always maximum brightness
regardless of the vehicle small light.
CONTRAST
You can adjust the display contrast to match
the angle of installation of the unit.
*The factory default setting is “9”.
(Adjustment level: 1 to 10)
Rotate the [UP/DOWN] knob to adjust the
contrast.
RESET
Long press [ ENTER ] button. Settings will
be set to the default value.
Audio Setup
Press the [AUDIO] button to enter sound effect
setting mode. First press shows current BEAT
EQ setting. Rotate the [UP/DOWN] knob to
changes BEAT EQ in this order:
OFF -> B-BOOST -> IMPACT -> EXCITE ->
CUSTOM
Rotate the [UP/DOWN] knob to changes
CUSTOM, and press the [ENTER] button, the
press [ ] or [ ] button to select it including:
BASS-G -> BASS-F -> BASS-Q -> MID-G ->
MID-F -> MID-Q -> TREBLE-G -> TREBLE-F
-> TREBLE-Q, rotate the [UP/DOWN] knob to
select a value.
BASS-G / MID-G / TREBLE-G: (-7)- (+7)
BASS-F: 50 / 100 / 200
BASS-Q: 0.7 / 1.0 / 1.4 / 2.0
MID-F: 500 /1K / 2K
MID-Q: 0.7 / 1.0 / 1.4 / 2.0
TREBLE-F: 5k / 10k / 15k
TREBLE-Q: 0.7 / 1.0 / 1.4 / 2.0
Press the [AUDIO] button, then press [ ] or
[ ] button to select USER preset including:
BALANCE -> FADER -> M-B EX -> HPF
(high pass filter) -> LPF (low pass filter) ->
SUBW VOL (Subwoofer Volume), rotate the
[UP/DOWN] knob to select a value.
BALANCE: LEFT 1-7 -> CENTER -> RIGHT
1-7
FADER: FRONT 1-7 -> CENTER -> REAR
1-7
M-BEX: ON / OFF
HPF: THROUGH / 60 / 90 / 120
LPF: THROUGH / 60 / 90 / 120
SUBW VOL: (-6) - (+6)
Radio Operations
Select tuner as playing source
Press [AM/FM] button once or more to enter
RADIO mode.
Changing the reception area
This unit is initially set to USA frequency
intervals of 10 kHz for AM and 200 kHz for
FM. When using it outside the USA, the
frequency reception range can be switched
to the intervals below.
U.S.
standard
AM
FM
Frequency
spacing
10 kHz
Frequency 530 to 1,710
range
kHz
Other
countries
Europe
standard
9 kHz
9 kHz
531 to
1,629kHz
531 to 1,602
kHz
Frequency
spacing
200kHz
50kHz
50kHz
Frequency
range
87.9 to
107.9MHz
87.5 to 108
MHz
87.5 to 108
MHz
Setting the reception area
*All station preset memories are lost when
the reception area is changed.
1.Press the [AM/FM] button and select the
desired radio band (FM or AM).
2. Press the [OPTION] button.
3.Press the [ ] or [ ] button to select “TUN
AREA”.
4. Rotate the [UP/DOWN] knob to select:
•U: U.S. standard (initial setting)
•K: Other countries
•E: Europe standard
5.P ress and hold the [ENTER] button to
store the selecting.
•The unit will turn off after setting.
Selecting the radio band
Press the [AM/FM] button on the front panel
or the [BAND / TOP] on the remote control
to select one radio band among FM1, FM2,
FM3, AM.
Manual tuning
During manual tuning, the frequency will be
changed in steps.
Press the [ ] or [ ] button on the panel to
tune in a lower / higher station.
Press the [
] or [
] button on the remote
control to select preset stations.
Manual store
Press and hold the [ / ] button on the
panel or [
/
] button on the remote
control to seek a lower / higher station.
To stop searching, repeat the operation above
or press other buttons having radio functions.
1.S elect the desired station with seek
tuning or manual tuning.
2.Press the [MENU] button
3.Rotate the [UP/DOWN] knob to select a
desired station.
4.P ress and hold the [ENTER] button
to store the current station into preset
memory.
Note:
Recall the stored stations
Auto tuning
When a station is received, searching stops
and the station is played.
Preset scan
Preset scan receives the stations stored
in preset memory in order. This function is
useful when searching for a desired station
in memory.
1. Press the [OPTION] button.
2.Press the [ ] or [ ] button to select
“PRESET SCN”.
3. Press the [ENTER] button.
*W hen a desired station is tuned in,
press the [ENTER] button to continue
receiving that station.
Auto store
Only stations with sufficient signal strength
will be detected and stored in the memory.
1.Press the [AM/FM] button and select the
desired band (FM or AM).
2. Press the [OPTION] button.
3.Press the [ ] or [ ] button to select
“AUTO STORE”.
4.Press and hold the [ENTER] button (1
sec.) to start automatic station search.
To stop auto store, press other buttons
having radio functions.
Notes:
1.After auto store, the previous stored stations
will be overwritten.
2.The unit has 4 bands, such as FM1, FM2,
FM3 and AM. FM3 and AM can store by AS
function. Each band can store 6 stations,
M303 can store 24 stations in total.
A total of 24 preset positions (6-FM1, 6-FM2,
6-FM3, 6-AM) exists to store individual radio
stations in memory.
1.Press the [AM/FM] button and select the
radio band.
2. Press the [MENU] button.
3.Rotate the [UP/DOWN] knob to select the
desired preset station.
4.Press the [ENTER] button to recall the
stored frequency.
Note:
After the band selecting, you can also rotate
the [UP/DOWN] knob to select a desired
preset station.
English
Radio Operations
Local seeking
When LOCAL seeking is ON, only those radio
stations with strong radio signal could be received.
To select LOCAL function, press the
[ADJUST] button on the front panel or press
and hold the [ DISP ] button on the remote
control, then press [ ] button on the front
panel or [
] button on the remote control
repeatedly until DX / LO displays on the
screen, and rotate the [UP/DOWN] knob to
select Local or Distant mode.
Note:
The number of radio stations that can be
received will decrease after the local seeking
mode is ON.
SiriusXM Satallite Radio Operations
Everything worth listening to is on SiriusXM,
getting over 130 channels, including the
most commercial-free music, plus the best
sports, news, talk and entertainment. To
start listening to the SiriusXM™ Satellite
Radio, a SiriusXM Vehicle Tuner (purchased
separately) and Subscription are required.
Displaying the Radio ID
Before you listen to satellite radio, you must
subscribe to the service using the SiriusXM
Radio ID number.
1. Press [ SAT ] button to activate SiriusXMmode.
2. Press the [ / ] button on the front panel
or the marine wired remote control to select
channel “0”.
The unit displays Radio ID.
Notes:
1.The Radio ID is located on the bottom of
the SiriusXM Connect Vehicle Tuner.
2.Please note that the SiriusXM Radio ID
does not include the letters I, O, S or F.
3.Activate the SiriusXM Connect Vehicle
Tuner using one of the two methods
below:
• Online: Go to “www.siriusxm.com/
activatenow”.
• Phone: Call 1-866-635-2349.
•To activate SiriusXM Canada service
go to www.xmradio.ca and click on
“ACTIVATE RADIO” in the top right
corner, or call 1-877-438-9677
Storing Channel Presets
1. Press [SAT] button on the front panel or
the [BAND / TOP] on the remote control or
the [MENU / BAND] on the marine wired
remote control to select the desired band
you want to store the preset in.
There are 3 Satellite Radio Preset bands.
Each press of [SAT] or [BAND / TOP] or
CMD8
9
English
SiriusXM Satallite Radio Operations
[MENU / BAND] changes the band:
SXM1 -> SXM2 -> SXM3 -> SXM1
2.T une to the desired channel and then
press [MENU] button on the front panel to
enter PRESET mode, and select desired
preset number by rotating [UP/DOWN]
knob on the front panel or pressing the
[
/
] on the marine wired remote
control. Press and hold [ENTER] key on
the front panel to store current channel.
3.R epeat the procedure to store up to 5
other channels on to the same band.
marine wired remote control to select desired
category.
3.Press the [ / ] button on the front panel
or the marine wired remote control or [
/
] button on the remote control to
select desired channel within the selected
Category. You can see channel name,
channel number, artist, title or content by
pressing [DISPLAY].
4.Press [ENTER] on the front panel or marine
wired remote control to tune to selected
channel.
Note:
Note:
•A total of 18 channels can be stored in the
preset memory, 6 channels for each band
(SXM1,SXM2 and SXM3).
If no operation is perfprmed for 10 seconds,
the Category Browsing mode is canceled.
Tuning Channels using Presets
1. Press [SAT] button on the front panel or
the [BAND / TOP] on the remote control or
the [MENU / BAND] on the marine wired
remote control to select the desired band
of Presets you wish to access.
2.Press the [MENU] button.
3.Rotate the [UP/DOWN] knob on the front
panel or press the [ / ] button on the
marine wired remote control to select the
desired preset station.
4.P ress the [ENTER] button on the front
panel.
Note:
• A fter the band selecting, you can also
rotate the [UP/DOWN] knob on the front
panel or press the [ / ] on the marine
wired remote control to select a desired
preset channel.
Category Browsing
1. Press and hold [SAT] button on the front
panel or [BAND / TOP] button on the
remote control to activate the Category
Browsing mode, or press and hold [MENU
/ BAND] button and press [ENTER] on
marine wired remote control to activate the
Category Browsing mode.
2.Rotate the [UP/DOWN] knob on the front
panel or press the [ / ] button on the
10
CMD8
Preset scan
Preset scan receives the stations stored
in preset memory in order. This function is
useful when searching for a desired station in
memory.
1. Press the [OPTION] button.
2.P ress the [
] or [
] button to select
“PRESET SCN”.
3.P ress the [ENTER] button on the front
panel.
*When a desired station is tuned in, press
the [ENTER] button on the front panel to
continue receiving that station.
Channel scan (in current category)
Channel scan receives the channel (in current
category) in order. This function is useful when
searching for a desired channel in current
category.
*This function is available in the category
browsing mode.
1.Press and hold the [SAT] button (1 sec.) to
enter “CAT MODE”.
2.P ress the [OPTION] button, then “CAT
SCN” appears on the display.
3.P ress the [ENTER] button on the front
panel.
And start the category scanning.
Note:
•Category scanning is not available when no
category is defined for the current channel.
SiriusXM Satallite Radio Operations
Changing the Display
Text information, such as the channel name,
artist name/feature, song/program title and
content is available with each SiriusXM
channel. The unit can display this text
information as explained below.
1.I n SiriusXM mode, press [DISPLAY]
button.
Each time you press this button, the display
changes as shown below.
Band/Channel number/channel name =>
Artist Name => Song Title=> Content Info
=> Category Name => Clock => Band/
Channel number/channel name
* If there is no text information,nothing will
be displayed.
Parental Lock / Unlock
The SiriusXM Parental Control feature allows
you to control access to channels that you
consider inappropriate for younger listener.
When enabled, the Parental Control feature
requires you to enter a password to tune to
the locked channels. Information on setting up
the password, setting up the channels to be
locked, and the method to access the locked
channels is described below.
1. F or setting up the password, press the
[OPTION] and [
] button to select
“PARENTAL PASSWORD”. Press
[ENTER] button to change password.
Enter old password, new password. To
enter code, rotate [UP/DOWN] knob to
decide number and [ ] or [ ] to select
digit. Each time you need to press [ENTER]
knob to confirm password. (Original
password is “0000”)
2. For setting up the channels to be locked,
press the [OPTION] and [
] button
during tuning to the desired channel, and
select “LOCK CH” and press [ENTER]
knob to start to lock channel. You will be
asked to input password. Enter password
and “LOCK” will be displayed if it is
successful.
3. For unlocking the locked channel, press
the [OPTION] and [ ] button to select
“UNLOCKCH”. Enter password and you
can unlock the channel.
4.For unlocking all locked channels, press
the [OPTION] and [ ] button to select
“UNLOCK ALL CH”. Enter password and
you can unlock all the channels.
5. For accessing the locked channels, select
channel by “DIRECT SELECT”.
Press and hold [MENU] and select
“DIRECT SELECT” by pressing [ENTER]
button. Input desired locked channel (need
to input 3 digit) and input password, then
you can tune to that locked channel.
This unit can playback MP3/WMA
files
Note:
• If you play a WMA file with active DRM
(Digital Rights Management), there will be
no audio.
To disable DRM
(Digital Rights Management)
When using Windows Media Player 9/10/11,
click on Tool -> Options -> Copy Music tab,
then under Copy settings, unclick the Check
box for copy project music. Then, reconstruct
files.
Personally constructed WMA files are used
at your own responsibility.
Precautions when creating MP3/
WMA file
Usable sampling rates and bit rates
1.MP3: Sampling rate 8 kHz-48 kHz, Bit rate
8 kbps-320 kbps / VBR
2.WMA: Bit rate 8 kbps-320 kbps
File extensions
1.A lways add a file extension “.MP3”,
“.WMA” to MP3, WMA file by using single
byte letters. If you add a file extension
other than specified or forget to add the
file extension, the file cannot be played.
2.Files without MP3/WMA data will not play.
The files will not play if you attempt to play
files without MP3/WMA data.
* When VBR files are played, the play time
display may differ the play location.
* When MP3/WMA files are played, a little
no sound part is caused between tunes.
Logical format (File system)
1.When writing MP3/WMA file on a CD-R
disc or CD-RW disc, please select
“ISO9660 level 1, 2 or Joliet” or Apple ISO
as the writing software format. Normal
play may not be possible if the disc is
recorded on another format.
2. T he folder name and file name can be
displayed as the title during MP3/WMA
play but the title must be within 32 single
byte alphabetical letters and numerals
(including an extension).
3. Do not affix a name to a file inside a folder
having the same name.
Folder structure
A disc with a folder having more than 8
hierarchical levels will be impossible.
Number of files or folders
1. U p to 999 files can be recognized per
folder.
Up to 3000 files can be played.
2. Tracks are played in the order that they
were recorded onto a disc. (Tracks
may not always be played in the order
displayed on the PC.)
3. S ome noise may occur depending on
the type of encoder software used while
recording.
Eject function
Just pressing the [
.
] button, ejects the disc
Notes:
•I f y o u f o r c e a C D i n t o b e f o r e a u t o
reloading, this can damage the CD.
•If a CD (12 cm) is left ejected for 15
seconds, the CD is automatically reloaded
(Auto reload).
Listening to a disc already loaded
in the unit
Press the [DISC] button to select the CD/
MP3/WMA mode.
When the unit enters the CD/MP3/WMA
mode, play starts automatically.
Loading a CD
Press the [OPEN] button to access the CD
SLOT behind the front panel.
Insert a CD into the center of the CD
SLOT with label facing up. The CD plays
automatically after loading.
Notes:
•Never insert foreign objects into the CD
SLOT.
•If the CD is not inserted easily, there may
be another CD in the mechanism or the
unit may require service.
•Discs without the
or
mark and
CD-ROMs cannot be played by this unit.
•Some CD-R/CD-RW discs may not be
usable.
3.Close the front panel.
*P ress the center of the front panel to
close.
TEXT
Track-down
1.Press the [ ] button to move back to the
beginning of the current track.
2.Press the [ ] button twice to move back
to the beginning of the previous track.
English
CD/MP3/WMA Operations
CD/MP3/WMA Operations
Fast-forward/Fast-reverse
Fast-forward
Press and hold the [ ] button .
Fast-reverse
Press and hold the [ ] button .
*For MP3/WMA discs, it takes some time
until the start of searching and between
tracks. In addition, some errors may occur
in the play time.
Pausing play
1. Press the [
] button to pause play.
“PAUSE” appears in the display.
] button
2.To resume CD play, press the [
again.
Displaying CD titles
This unit can display title data for MP3/WMA
disc.
When SCROLL is OFF, each time you press
the [ DISPLAY ] button to change the title
display.
Folder Select
This function allows you to select a folder
containing MP3/WMA files and start playing
from the first track in the folder.
Rotate the [UP/DOWN] knob to select a
folder.
Search Function
•If MP3/WMA disc has no ID3 TAG, “NO
TITLE” appears in the display.
•Only ASCII characters can be displayed in
Tags.
1.Press the [MENU] button to enter fold
sch mode. Press the [ENTER] button to
enter the folder list search mode.
2.Rotate the [UP/DOWN] knob to select a
folder.
3.Press the [ENTER] button to enter the file
list search mode. And then the track list appears in the display.
4.Rotate the [UP/DOWN] knob to select a
track.
5. Press the [ENTER] knob to play.
* When play back MP3 / WMA file, this
function is performed in the current folder.
Selecting a track
Top function
MP3/WMA disc
FILE->FOLDER->TITLE->ARTIST->ALBUM>TRACK->FILE ...
Notes:
Track-up
1.Press the [ ] button to move ahead to
the beginning of the next track.
2.Each time you press the [ ] button, the
track advances ahead to the beginning of
the next track.
The top function resets the CD player to
the first track of the disc. Press and hold the
[MENU] button (1 sec.) to play the first track
(track No. 1) on the disc.
*In case of MP3/WMA, the first track of the
current folder will be played.
CMD8
11
English
CD/MP3/WMA Operations
Other various play functions
Press the [OPTION] button.
Scan play
This function allows you to locate and play
the first 10 seconds of all the tracks recorded
on a disc.
2.P ress the [ ] or [ ] button to select
“SCN”.
3.R otate the [UP/DOWN] knob to select
“ON” or ”OFF”.
4. Press the [ENTER] button.
Repeat play
This function allows you to play the current
track repeatedly or play a track currently
being played in the MP3/WMA folder
repeatedly.
CD:
2.P ress the [
“RPT”.
] or [
] button to select
iPod & iPhone Operations
3.R otate the [UP/DOWN] knob to select
“ON” or ”OFF” .
4.Press the [ENTER] button.
MP3/WMA:
2.Press the [ ] or [ ] button to select
“RPT”.
3.R otate the [UP/DOWN] knob to select
“OFF”, “TRK” or “FOLD”.
4.Press the [ENTER] button.
Random play
This function allows you to play all tracks
recorded on a disc in a random order.
2.Press the [ ] or [ ] button to select
“RDM”.
3.R otate the [UP/DOWN] knob to select
“ON” or ”OFF”.
4. Press the [ENTER] button.
Connect
Connect an iPod or iPhone to the USB
connector via CCA-750 cable.
When connecting a device, the unit will read
the files automatically. The track information
displays on the screen once playback start.
MENU
In the S-CTRL OFF mode, press [MENU]
button, rotate the [UP/DOWN] knob select
“MUSIC” or “VIDEO”.
Select “MUSIC”, press the [ENTER] button,
then rotate the [UP/DOWN] knob to select
PLAYLISTS / ARTISTS / ALBUMS / SONGS
/ GENRES / COMPOSERS, and press the
[ENTER] button to confirm.
Select “VIDEO”, press the [ENTER] button,
then rotate the [UP/DOWN] knob to select
MOVIES / MUSIC VIDEOS / TV SHOWS /
VIDEO PODCASTS / RENTALS, and press
the [ENTER] button to confirm.
To exit the category selecting.
• P ress the [ ] button to back previous
subfolder list in iPod menu.
• Press and hold (1sec) [MENU] button to
back top of iPod menu ”MUSIC/VIDEO”.
Note:
USB Operations
1.Insert a USB device into the rear of the
unit USB cable.
When connecting a USB device, the unit
will read the files automatically.
2.To remove the USB device, you should
first select another source or turn off
the power, in order to avoid damaging
the USB device. Then take off the USB
device.
3.O p e r a t i o n i s s a m e a s M P 3 / W M A
operation.
VIDEO MENU item is different by the model
of connected iPod and language setting.
Repeat play
This function allows you to play the current
track repeatedly or play all tracks in your
iPod/iPhone repeatedly.
1. Press the [OPTION] button.
2.Press the [ / ] button on the front panel
or the marine wired remote control or
[
/
] button on the remote control to
select “RPT”.
3.Rotate the [UP/DOWN] knob to select “ON”
or ”OFF” .
3. Press the [ENTER] button.
Random play
This function allows you to play all tracks
recorded on a disc in a random order.
1. Press the [OPTION] button.
12
CMD8
to monitor
2.Press the [ / ] button on the front panel
or the marine wired remote control or
[
/
] button on the remote control to
select “RDM”.
3.R otate the [UP/DOWN] knob to select
“ALBUM”, “SONG” or “OFF”.
4. Press the [ENTER] button.
Setting iPod simple control mode
Use this function if you wish to operate
through your iPod connected to this unit via
the USB cable.
* The factory default setting is “ OFF ”.
1. Press the [OPTION] button.
2.Press the [ / ] button on the front panel
or the marine wired remote control or
[
/
] button on the remote control to
select “S-CTRL”.
3.R otate the [UP/DOWN] knob to select
“ON” or “OFF”.
•O N: Operations are made through your
iPod.
•O F F: O p e rations cannot be made
through your iPod.
Notes:
•When performing iPod operations using
simple control mode, make the operations
slowly. If repetitive operations are
performed too quickly, unforeseen errors
may occur.
•When performing iPod operations using
simple control mode, please do not
operate the iPod and the unit at the same
time, otherwise there may be unexpected
event happened.
•Some iPod models do not support this
function. Consult your nearest Clarion
dealer or website to confirm which models
do not support this function.
iPod menu alphabet search
This function searches the subfolders for
desired alphabetical letters.
1.Press the [MENU] button to select the iPod
menu mode.
2.P ress the [ENTER] button to switch
between categories.
MUSIC: PLAYLISTS, ARTISTS, ALBUMS,
SONGS, GENRES, COMPOSERS
VIDEO: MOVIES, MUSIC VIDEOS,
TV SHOWS, VIDEO PADCASTS,
RENTALS
3.Press the [ENTER] button. (The contents
of the category are displayed.)
4.Press and hold the [DISPLAY] button (1
sec.).
5.Rotate the [UP/DOWN] knob to select the
desired letter to search.
6.Press the [DISPLAY] button again to next
perform search.
7. Press the [ ENTER ] button to confirm.
Listening to Pandora ®
You can stream Pandora internet radio by
connecting an iPhone/iPod that has the
Pandora mobile application already installed.
To start streaming, connect the iPod/iPhone
with Pandora already launched.
When the unit displays “PLEASE LAUNCH
Pandora APPLICATION ON MOBILE
DEVICE” in Pandora mode, please launch the
Pandora Application by operating the iPod/
iPhone connected.
1.Press the [AUX/iPod] button to enter the
Pandora mode.
Selecting a station from list
Press the [MENU] button and select “BY
DATE” or “A-Z” by rotating the [UP/DOWN]
knob and press the [ ENTER ] button.
iPod & iPhone Operations
• BY DATE: List in an created date order
• A-Z: List in an alphabetical order
Note:
Go to next station or previous station(an
alphabetical order)
Press the [ ] button on the front panel or the
marine wired remote control or [
] button
on the remote control to go to next station.
Press the [ ] button on the front panel or the
marine wired remote control or [
] button
on the remote control to go to previous station.
Play/Pause
] button on the front panel or the
Press the [
marine wired remote control or the [ ] button on
the remote control for play / pause.
Thumbs up/down
Thumbs up:
press the [ ] button on the front panel or the
[
] button on the marine wired remote
control or the [RDM] button on the remote
control for thumbs up. Giving a track the
thumbs up will tell Pandora to play more tracks
like that one.
Thumbs down:
press the [ ] button on the front panel or the
[
] button on the marine wired remote
control or the [SCN] button on the remote
control for thumbs down. Giving a track the
thumbs down will skip to the next track (subject
to skip limit), and Pandora will remember not
to play that track on the station again.
Notes:
•You can personalize your stations by
“thumbs up” or “thumbs down”.
•If you give a track the thumbs down after
the skip limit has been exceeded, your
feedback will be saved but the current track
will continue to play.
English
iPod & iPhone Operations
•Pandora limits the number of skips allowed
on their service. If you attempt to skip tracks
beyond the limit, “SKIP LIMIT” is displayed.
AUX Operations
The rear AUX terminals of this system is
provided to allow playback of sounds and music
from external devices connected to this unit.
Press [AUX/iPod] button on the panel to select
“AUX”.
AUX Input sensitivity setting
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
after adjusting the volume.
* The factory default setting is “MID”.
1. Press the [OPTION] button.
2. “AUX SENS” appears in the display.
3.Rotate the [UP/DOWN] knob to select
“HIGH”, “MID” or “LOW”.
Note:
•
hen AUX mode is selected, AUX IN
W
sensitivity can be set.
BOOKMARK artist or song
Short-press the [RPT] buton on the remote
control to Bookmark track.
Long-press the [RPT] button on the remote
control to Bookmark current artist of the track.
Skip
Press and hold the [ ] button on the front
panel or the marine wired remote control
or press and hold the [
] button on the
remote control for the next tracks in station.
CMD8
13
English
USB
6. TROUBLE SHOOTING
Problem
GENERAL
Problem
Unit can not power on.
Cause
Measure
Unit fuse blown.
Replace with new fuse of correct rating.
Boat battery fuse blown.
Replace with new fuse of correct rating.
Unit can not power on.
Nothing happens
when buttons are
The microprocessor has
pressed.
Turn off the power and open the front panel.
Press the [RESET] button with a thin rod.
Note:
When the [RESET] button is pressed, turn off
malfunctioned due to noise, etc. the ACC power.*
Display is not
accurate.
* When the [RESET] button is pressed,
frequencies of radio stations, titles, etc. stored
in memory are cleared.
Improper audio output connection. Check wiring and correct.
Volume set too low.
No/low audio output.
Poor sound quality or
distortion.
Increase volume level.
Speakers damaged.
Replace speakers.
Heavily biased volume balance.
Adjust the channel balance to center position.
Speaker wiring is in contact with
metal part of boat.
Insulate all speaker wiring connections.
Non-standard disc used.
Use a standard disc.
Speaker power rating does not
match unit.
Replace speakers.
Wrong connections.
Check wiring and correct.
Speaker is shorted.
Check wiring and correct.
Sound skips or is
noisy.
Sound is bad when
power is first turned
on.
14
CMD8
Cause
Another disc is already loaded.
There is an object install installed
the unit.
Compact disc is dirty.
Compact disc is heavily scratched
or warped.
Condensation may form on the internal
lens when the boat is parked in a
humid place.
Measure
Eject the disc before loading the new one.
Remove the object inside the unit.
Clean the compact disc with a soft cloth.
Replace with a compact disc with no
scratches.
Let dry for about 1 hour with power on.
Measure
Reversing the connection direction of the USB device,
try it again.
The USB connector is broken.
Replace with a new USB device.
The USB device is damaged.
Disconnect the USB device and reconnect. If the
device is still not recognized, try replacing with a
different USB device.
Connectors are loose.
No sound heard with
the display “No File”
shown.
No MP3/WMA file is stored in the
USB device.
Store these files properly in the USB device.
Sound skips or is noisy.
MP3/WMA files are not encoded
properly.
Use MP3/WMA files encoded properly.
SiriusXM Advisory Messages
Message
CHEK TUNER
CHK ANTENA
NO SIGNAL
CH UNAVAIL
DISC Player
Problem
USB device is not
recognized.
CHAN UNSUB
Unit resets itself when Incorrect connection between ACC
Check wiring and correct.
engine is off.
and Battery.
Disc cannot be
loaded.
USB device cannot be
inserted.
Cause
The USB device has been inserted
with wrong direction.
CH LOCKED
SUBSCRIPTN
UPDATED
Description
Check the SiriusXM tuner connection on the back of the unit to ensure that its correctly
connected.
Ensure the SiriusXM antenna cable is connected to the SiriusXM tuner correctly.
Check the SiriusXM antenna wire for breaks or sharp bends. Replace the antenna if necessary.
Press RESET located….. If the message remains, the antenna may have been damaged.
The vehicle must be outside, and the antenna must have a clear view of the southern sky.
The magnetic antenna must be mounted on the outside of the vehicle for the best reception.
This channel is not included in your SiriusXM subscription plan.
Call 1-866-635-2349 to subscribe.
This channel is not a valid SiriusXM channel.
The channel number has been entered incorrectly, or the channel was removed from the
SiriusXM channel lineup
The selected channel has been locked by the parental controls, or a mature channel has been
selected.
A prompt to enter the unlock code will appear. Enter the unlock code as described on page 10.
An update to your SiriusXM subscription has been received by the SiriusXM tuner. Press any
button to continue.
8. SPECIFICATIONS
If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
Display
ERROR 3
ERROR 5
Cause
Disc is inserted incorrectly.
Measure
Eject the disc then reload it properly.
The disc format is not supported.
Try another disc.
This is a failure of deck’s mechanism.
Consult your store of purchase.
If an error display other than the ones described above appears, press the [RESET] button. If the
problem persists, turn off the power and consult your store of purchase.
*When the [RESET] button is pressed, frequencies of radio stations, titles, etc. stored in
memory are cleared.
FM Tuner
Input
Frequency Range:
USA: 87.9 MHz to 107.9 MHz
Europe: 87.5 MHz to 108.0 MHz
Others: 87.5 MHz to 108.0 MHz
Usable Sensitivity: 8 dBμV
Alternate Channel Selectivity: 60 dB
Stereo Separation (1 kHz): 30 dB
Frequency Response (±3 dB):
30 Hz to 15 kHz
Audio input sensitivity:
High: 320mV (at 1V output)
Mid: 650mV (at 1V output)
Low: 1.3V (at 1V output)
(input impedance 10 k or greater)
Aux-in level: ≤2V
AM Tuner
Frequency Range:
USA: 530 kHz to 1710 kHz
Europe: 531 kHz to 1602 kHz
Others: 531 kHz to 1629 kHz
Usable Sensitivity: 28 dBμV
CD Player
System: Compact disc digital audio system
Usable Discs: Compact disc
Frequency Response (±1 dB):
20 Hz to 20 kHz
Signal/Noise ratio: 94 dB
Harmonic Distortion: 0.1%
English
7. ERROR DISPLAYS
General
Power supply voltage:
14.4VDC (10.8 to 15.6V allowable),
negative ground
Pre-Amp output voltage:
2.0V (CD play mode: 1kHz, 0dB, 10k load)
Fuse: 15A
Dimensions of the Main Unit:
198mm Width × 91mm Height × 208mm Depth
7-25/32(width) × 3-19/32(Height) × 8-6/32(Depth)
Weight of the Main Unit: 4.19 lb. (1.90 kg)
Dimensions of the Remote Control unit:
43mm Width × 11mm Height × 113mm Depth
1-2/3(Width) × 2/5(Height) × 4-2/5(Depth)
Weight of the Remote Control Unit:
1.16oz. (36g) (including battery)
MP3/WMA mode
MP3 sampling rate: 8 kHz to 48 kHz
MP3 bit rate: 8 kbps to 320 kbps / VBR
WMA bit rate: 8 kbps to 320 kbps
Logical format: ISO9660 level 1,2
J oliet file system
USB
Specification: USB 1.0/2.0
Playable audio format:
MP3(.mp3): MPEG 1/2/Audio Layer-3
WMA(.wma): Ver 7/8/9.1/9.2
Audio Amplifier
Maximum Power Output:
180 W (45 W × 4 ch)
Bass Control Action (100 Hz):
+14 dB, –14 dB
Treble Control Action (10 kHz):
+12 dB, –12 dB
Line Output Level (CD 1 kHz): 2 V
Note:
•S pecifications and design are subject
to change without notice for further
improvement.
Power Output:
18W RMS x 4 Channels at 4
and 1% THD+N
Signal to Noise Ratio:
94dBA (reference: 1W into 4 )
CMD8
15
English
4) Cautions on Installation
9. INSTALLATION / WIRE
CONNECTION GUIDE
1.Prepare all articles necessary for
installing the source unit before
starting.
2.Install the unit within 30° of the
horizontal plane. (Figure 2)
3.If you have to do any work on the boat
body, such as drilling holes, consult
your boat dealer beforehand.
CONTENTS
1) Before Starting....................................................................... 16
2) Package Contents.................................................................. 16
3) General Cautions................................................................... 16
4) Cautions on Installation.......................................................... 16
5) Installing the Source Unit....................................................... 16
6) Cautions on Wiring ................................................................ 17
7) Sample Systems ................................................................... 17
8) Wiring and Connections......................................................... 18
9) Connecting the accessories................................................... 18
4.Use the enclosed screws for
installation.
Using other screws can cause
damage.
(Figure 3)
Chassis
Damage
Max 30˚
Max. 5/16 (8 mm)
1) Before Starting
Figure 2
1.This set is exclusively for use with a negative
ground 12 V power supply.
2.Read these instructions carefully.
3.Be sure to disconnect the battery “terminal” before
starting. This is to prevent short circuits during
installation. (Figure 1)
Chassis
Figure 3
5) Installing the Source Unit
• Marine stereo mounting dimensions
Using the supply template to cut the hole and drill the
holes. (Figure 4)
Battery
180.9
179
Figure 1
60
22.2
Hole
29
Screws M4x30 mm....................................... 6
Power supply cable...................................... 1
Owner’s manual........................................... 1
Warranty card............................................... 1
Installation template..................................... 1
39
Source unit................................................... 1
Hole block seal (black)................................. 1
Support strap................................................ 1
M4 Nut.......................................................... 1
M4 washer.................................................... 2
34.5
2) Package Contents
3) General Cautions
1.Do not open the case. There are no
user serviceable parts inside. If you
drop anything into the unit during
installation, consult your dealer or an
authorized Clarion service center.
16
CMD8
2.Use a soft, dry cloth to clean the case. Never use a rough cloth, thinner,
benzine, or alcohol etc. For tough dirt, apply a little cold or warm water to a
soft cloth and wipe off the dirt gently.
185
Figure 4
Holes (6x)
CAUTION
Drill appropriately prepared holes at the
6 places for fixing the screw depending
on the materials and plate thickness of
the panel.
6) Cautions on Wiring
1.Be sure to turn the power off when wiring.
2.Be particularly careful where you route the wires.
Keep them well away from the engine, exhaust pipe, etc. Heat may damage the wires.
3.If the fuse should blow, check that the wiring is correct.
If it is, replace the fuse with a new one with the same amperage rating as the original one.
4.To replace the fuse, open the lock on the source unit side, remove the old fuse and insert the
new one. (Figure 6)
*There are various types of fuse cases. Do not let the battery side terminal touch other metal
parts.
Notes:
1.Some boat models require special mounting kits for proper installation.
Consult your Clarion dealer for details.
English
1.Insert the source unit into the cutout hole until to the end. (Figure 5)
2.Using the supply screws (4 × 30) to secure the source unit. (Figure 5)
3.Using support strap to secure the source unit on the back side by supply M4 nut.
(Figure 5)
Fuse
Support Strap
•Remove CD mech lock-screw.
•Stick Hole block seal for hole of
lock-screw.
M4 Nut
M4 washer
Source unit
Support Strap
4 × 30 Screws
M4 Nut
Fuse case
Figure 6
Rubber Gasket
Stud Bolt
M4 washer
7) Sample Systems
4 × 30 Screws
Note:
Confirm that the rubber gasket is fastened securely to the base
panel.
6
7
Figure 5
1
2
8
2
3
4
1
2
3
4
5
6
7
8
Source unit
RCA extension cable (sold separately)
4-Channel power amplifier
Front speakers
Rear speakers
Wired remote control unit
SiriusXM-Connect Vehicle Tuner
AUX
5
CMD8
17
16-Pin Connector Extension Lead
(attached to the source unit)
Black
White
SUB OUT 1
REAR L
English
8) Wiring and Connections
Red
SUB OUT 2
REAR R
Black
Black
FRONT L
FRONT R
Red
Gray/Black
White
Rear audio output (Right)/
Subwoofer output 2
Front Left
White/Black
Rear Right
Left
Right
Purple/Black
Front audio
output terminal
Green
Rear Left
White
Red
Left
Right
AUX IN
USB cable
(connect to USB memory/
iPod/iPhone device)
4-Speaker system
or
Blue/White wire (Amplifier turn-on lead)
Connect to remote turn-on lead of amplifier
Connect to ground
Gray/Black
White
Front Left
White/Black
Orange/White wire (Illumination lead)
Connect it to the power supply terminal
for illumination
ANT
Purple
Antenna
(Black)
Purple/Black
Green
WIRED REMOTES
SiriusXM
Refer to the right
WIRED REMOTES
CMD8
12V
Black wire (Ground lead)
Front Right
18
Red wire (Power lead)
Accessory
2-Speaker system
Gray
(Black)
Yellow wire (Memory back-up lead)
Connect directly to battery
FUSE 15A
Green/Black
AUX L
Red
Black
Gray
Front Right
Purple
White
AUX R
Gray
Rear audio output (Left)/
Subwoofer output 1
SiriusXM-Connect™ Vehicle Tuner to
be connected: Sold separately
Not used.
Insulate each wire
Green/Black
9) Connecting the accessories
Connect to external
wired Remote Control Unit
•Connecting to the external amplifier
External amplifiers can be connected to the 4 channel RCA output connections. Ensure that the connectors are not grounded or shorted to prevent damage to the
unit.
English:
Español:
We Clarion declares that this model CMD8 is following the provision of Directive
1999/5/EC with the essential requirements and the other relevant regulations.
Clarion declara que este modelo CMD8 cumple con los requisitos esenciales y
otras disposiciones aplicables descritos en la Directiva 1999/5/CE.
Declaration of conformity
Declaración de conformidad
Français:
Déclaration de conformité
Nous, Clarion, déclarons que ce modèle CMD8 est conforme aux exigences
essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Clarion Co., Ltd.
All Rights Reserved. Copyright © 2013: Clarion Co., Ltd.
Printed in China / Imprimé en Chine / Impreso en China
2013/04
PN: 127075015048

advertisement

Related manuals

Download PDF

advertisement