! Note

! Note

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

Introduction

Murata Manufacturing Co., Ltd. has been developed the EMI suppression device market since the invention of 3 terminal capacitor DS310 series in

1979. Also, we have been struggling to develop and popularize new noise countermeasure technologies as well as new products in the concept of

"Develop unique products", as the best solution partner of customers.

We hope you can find your key device to your noise problem.

Explanation of symbols in this catalog

Features of each series

All Products

Flow soldering available

Flow OK

Reflow

OK

Reflow soldering available

Meet large current lines

Cip Ferrite Bead

Meet high frequency noise up to 1-2GHz

Meet ultra high frequency noise up to 10GHz

LC Combined Type Filter

Chip Common Mode Choke Coil

Features of each item

New product

Exist in design kit

Rated current 1A or more

Rated current 3A or more

Low cut off frequency type for UHF band noise which affects to digital TV tuner for high speed differential signal lines

(USB/LVDS/IEEE1394 etc.) for ultra high speed differential signal lines

(HDMI/DVI/Display Port etc.)

Line impedance has been matched to transmission lines

for EU RoHS Compliant

All the products in this catalog comply with EU RoHS.

EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use of Certain

Hazardous Substances in Electrical and Electronic Equipment".

For more details, please refer to our website 'Murata's Approach for EU RoHS'

(http://www.murata.com/info/rohs.html).

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

CONTENTS

EMI Filter Selection by Application

aDigital Still Camera

aBlu-ray/DVD

2

4

aMobile Phone

aLCD-TV

EMI Filter Selection by Circuits and Noise Frequency

Product Guide

3

5

2

6

8

BL

p

Chip Ferrite Bead

Series Introduction

Part Numbering

Series Line Up

Product Detail

!Caution/Notice

Soldering and Mounting

Packaging

Design Kits

NF

p

Chip EMIFILr

Series Introduction

Part Numbering

Series Line Up

Product Detail

!Caution/Notice

Soldering and Mounting

Packaging

Design Kits

DL

p

Chip Common Mode Choke Coil

Series Introduction

Part Numbering

Series Line Up

Product Detail

!Caution/Notice

Soldering and Mounting

Packaging

Design Kits

BNX

Block Type EMIFILr

Series Line Up

Function Example

Product Detail

!Caution/Notice

Soldering and Mounting

Packaging

Design Kits

81

82

86

87

12

14

15

20

92

94

97

100

125

126

132

133

136

138

139

140

154

155

159

160

162

162

165

168

170

174

175

EA

Microwave Absorber

Part Numbering

Product Detail

Notice

178

179

182

Product Guide by Size

Part Number Quick Reference

Alphabetic Product Name Index

Murata EMI Filter Selection Simulator

Introduction of Related Catalogs

183

184

184

185

186

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

Digital Still Camera

Application Sample

Data Line

BLM

**

B

p33 p76

DLP0NS

p142

IC Power Line

BLM

**

P

p50

NFM

**

P

p105

Data Line

BLM

**

B

p33 p76

Flash

Memory

Lens

Lens

Motor

Image

Sensor

Motor

Driver

USB I/F

Image Sensor

Controler

A/D Converter

MCU

Card

Slot

Power Line

BLM

**

P

p50

NFM

**

P

p105

USB Differential Data Line

DLP0NS/11S

p142 p143

Storage

Media

CPU

(DSP,JPEG)

LCD

Controler

LCD

Panel

Speaker

Audio

Processer

Microphone

AC

Adapter

Power Unit

Battely

AC Adapter Input

DLW5BT

p153

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

2

C31E.pdf

09.4.20

Mobile Phone

Application Sample

FPC

NFA18SL

p117

DLP11S/DLP2AD

p143 p146

Audio Line

BLM03/BLM15

p21 p23 p26 p33 p35 p50 p51

DLM11G/DLM2HG

p140 p141

LCD Module

Base Band

Application

RF-Module/IC

Tuner/

Wireless LAN

Audio

DC-DC

Converter

Camera Module

RF Module

BLM03/BLM15

p21 p23 p26 p33 p35 p50 p51 p65 p71 p74

Power Line

NFM18PS/PC

p105 p106

USB Line

DLP11S

p143

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

3

Blu-ray/DVD

Application Sample

IC Power Line

BLM18P/18K/18EG/21P

p53 p55 p61 p72

NFM18PS/PC

p105 p106

Control Panel

Data Line

BLM15B/15H/15G

p35 p65 p74

BLA

p76 p79

Optical

Drive

Panel Controller

Clock Line

BLM

**

B/

**

P

p33 p50

NFL18/21

p114 p116

Memory

System

Processor

System

Control

CLK

Imaging

Processor

Power Line to Power Supply

CLK

Audio Line

Video Line

Date Line

Power Line

1394

Transceiver

HDMI

Transmitter

IEEE1394

DLP11S/DLP2AD

p143 p146

DLW21

p148

Video

Encoder

Decoder

HDMI

DLP11S/DLP2AD

p143 p146

DLW21

p148

Audio

AD/DAC

Demodulatio

IC

Power Line

BLM18P/18K/18EG

NFM

**

P

p53 p61 p72 p105

DLW5

p152

Head Phone

Video

BLM

**

B

p33 p76

TV Tuner

NFL18/21

p114 p116

Audio

DLM11G

p140

DLM2HG

p141

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

4

C31E.pdf

09.4.20

LCD-TV

Application Sample

RSDS Line

DLP11S/DLP2AD

p143 p146

LVDS

RSDS

Gray-Scale

Voltage

Generater

Source Driver

Timing

Controler

Resalution Convert

Scaler IP Convert

Frame

Memory

LVDS Line

DLP11S/DLP2AD

p143 p146

Display

Back

Light

Backlight Up

Convert Panel

Picture Processing

Environment IC

AC

Converter

A/D

Convert

Tuner

(BS/CS/UHF)

Picture Processing

Engine

Video

Decoder

Audio

Processor

Audio

Power Amp

Audio IN/OUT

Analog I/O

(RGB Composite)

Digital I/O

(DVI,iLink/HDMI)

Audio Line

DLW5BT

p153

AC IN

IC Power Line

NFM18PS/PC

p105 p106

BLM18P/18K/18EG

p53 p61 p72

Digital I/O

DLP11S/DLP2AD

p143 p146

DLW21S

p148

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

5

oChip Ferrite Bead / Chip EMIFILr

Circuit Type?

Power Line

BLM03P

0201 / 0.75-0.9A

/Imp.22-33

p50

BLM15P

0402 / 1-2.2A

/Imp.10-120

p51

BLM18P

0603 / 0.5-3A /Imp.30-470

BLM21P

0805 / 1.5-6A /Imp.22-330

p53 p55

BLM31P

1206 / 1.5-6A /Imp.33-600

p57

BLM41P

1806 / 1.5-6A /Imp.60-1000

p59

Low DC Resistance Type

BLM18K

0603 / 1.3-6A /Imp.26-600

BLM18S

0603 / 1.5-6A /Imp.26-330

p61 p63

NFM18PC

0603 / 2-4A /Cap.0.1-2.2

µ

F

NFM21P

0805 / 2-6A /Cap.0.1-4.7

µ

F

NFM3DP

1205 / 2A /Cap.0.022

µ

F

NFM31P

1206 / 6A /Cap.27

µ

F

NFM41P

1806 / 2-6A /Cap.0.2-1.5

µ

F

NFM55P

2220 / 6A /Cap.1.5

µ

F

p106 p107 p108 p109 p110 p111

T Circuit Filter Feed Through Type

NFE31P

1206 / 6A /Cap.22-2200pF

p112

NFE61P

2706 / 2A /Cap.33-4700pF

p113

Block Type

BNX022/023

10-15A /Range1MHz-2GHz

p165

BLM15EG

p71

0402 / 0.7-1.5A

/Imp.120-220

BLM18HE

p67

0603 / 0.5-0.8A

/Imp.600-1500

BLM18EG

0603 / 0.5-2A /Imp.100-600

p72

NFM18PS

0603 / 2A /Cap.0.47-1.0

µ

F

p105

General Signal Line

Under 10MHz

BLM02A

01005 /Imp.10-120

BLM03A

0201 /Imp.10-1000

BLM15A

0402 /Imp.10-1000

BLM18A

0603 /Imp.120-1000

BLM18T

0603 /Imp.120-1000

BLM18R

0603 /Imp.120-1000

BLM21A

0805 /Imp.120-1000

BLM21R

0805 /Imp.120-1000

Array Type

BLA2AA

0804 /Imp.120-1000

BLA31A

1206 /Imp.30-1000

p20 p21 p23 p28 p32 p45 p30 p47 p76 p79

NFM18C

0603 /Cap.22-22000pF

NFM21C

0805 /Cap.22-22000pF

p100 p101

NFM3DC

1205 /Cap.22-22000pF

NFM41C

1806 /Cap.22-22000pF

Array Type

NFA31C

1206 /Cap.22-22000pF

p102 p103 p104

T Circuit Filter Feed Through Type

NFE31P

1206 /Cap.22-22000pF

p112

NFE61P

2706 /Cap.33-4700pF

p113

BLM15HG

0402 /Imp.600-1000

BLM15EG

0402 /Imp.120-220

BLM18HG

0603 /Imp.470-1000

BLM18HK

0603 /Imp.330-1000

BLM18EG

0603 /Imp.100-600

p65 p71 p67 p67 p72 p74 p75

High Speed Signal Line

Over 10MHz

BLM03B

0201 /Imp.10-600

BLM15B

0402 /Imp.5-1800

BLM18B

0603 /Imp.5-2500

BLM21B

0805 /Imp.5-2700

Array Type

BLA2AB

0804 /Imp.10-1000

BLA31B

1206 /Imp.120-1000

p33 p35 p38 p42 p76 p79

LC Combined

NFL18ST

0603 /Cut off 200-500MHz

p114

NFL18SP

0603 /Cut off 150-500MHz

p115 p116

NFL21S

0805 /Cut off 10-500MHz

NFW31S

1206 /Cut off 10-500MHz

p121

RC Combined

NFR21G

p123

0805 / 22-100

/Cap.10-100pF

Array Type (RC/LC Combined)

NFA31G

p124

1206 / 6.8-100

/Cap.10-100pF

NFA18S

0603 /Cut off 50-480MHz

p117

NFA21S

0805 /Cut off 50-330MHz

p119

BLM15HD

0402 /Imp.600-1000

BLM15HB

0402 /Imp.120-220

BLM18HD

0603 /Imp.470-1000

BLM18HB

0603 /Imp.120-330

BLM18HE

0603 /Imp.600-1500

p65 p65 p67 p67 p67

LC Combined

NFL18ST

0603 /Cut off 200-500MHz

p114

Array Type (LC Combined)

NFA18S

0603 /Cut off 50-480MHz

NFA21S

0805 /Cut off 50-330MHz

p117 p119

BLM15GA

0402 /Imp.75

p74

BLM15GG

0402 /Imp.220-470

BLM18GG

0603 /Imp.470

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

6

C31E.pdf

09.4.20

oChip Common Mode Choke Coil

Circuit Type?

DC Power Line

DLW5AH

2014 / 0.2A

/Imp.4000

p152

DLW5BS

p152

2020 / 0.5-5A /Imp.190-3000

DLW5BT

p153

2020 / 1.5-6A /Imp.100-1400

High Speed Differential Signal Line

High Speed Signal Line

(USB/LVDS/IEEE1394 etc.)

DLP0NS

03025 /Imp.67-120

DLP11SN

0504 /Imp.35-330

DLW21H

0805 /Imp.67-180

DLW21S_SQ

0805 /Imp.67-370

DLP31S

1206 /Imp.120-550

DLW31S

1206 /Imp.90-2200

Array Type

DLP2AD

0804 /Imp.67-280

DLP31D

1206 /Imp.90-440

p142 p143 p150 p148 p145 p151 p146 p147

Ultra High Speed Signal Line

(HDMI/DVI/Display Port etc.)

p143

DLP11SA

0504 /Imp.35-90

DLW21S_HQ

0805 /Imp.67-120

p148

Audio Line

DLM11G

0504 /Imp.600

DLM2HG

1008 /Imp.600

p140 p141

Guidance of Digits in This Chart

ofor BLM03P

0201 / 0.75-0.9A

/Imp.22-33

Size

(inch)

Rated Current Impedance ofor BNX022/023

10-15A /Range1MHz-2GHz

Rated Current Effective Frequency Range ofor NFR21G

0805 / 22-100

/Cap.10-100pF

Size

(inch)

Resistance Capacitance ofor NFA18S

0603 /Cut off 50-480MHz

Size

(inch)

Cut-off Frequency ofor DLW5BS

2020 / 0.5-5A /Imp.190-3000

Size

(inch)

Rated Current Impedance

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

7

BL

p

Series

Size Code

Inch (mm)

p20

01005 (0402)

10

Impedance (

) at 100MHz

100 1000

BLM02A

10 70 120

BLM03A

p21

0201 (0603)

10 70

80

120 240 600 1000

BLM15A

p23 p26

0402 (1005) 10 70 120 220 600 1000

BLM18A

BLM21A

p28

0603 (1608)

p30

0805 (2012)

120

220

150 330

120 150

220

330

470

600

470

600

1000

1000

BLM18T

p32

0603 (1608) 120 220 600 1000

BLA2AA

(4 circuits array)

BLA31A

(4 circuits array)

p76

0804 (2010)

p79

1206 (3216) 30 60

120 220

120 220

600 1000

600 1000

BLM03B

BLM15B

BLM18B

BLM21B

BLA2AB

(4 circuits array)

BLA31B

(4 circuits array)

BLM18R

BLM21R

BLM03P

BLM15P*

BLM18P*

BLM21P*

BLM31P*

BLM41P*

BLM18K*

p61

(Low DC Resistance Type)

BLM18S*

p63

(Low DC Resistance Type)

p65

BLM15HG

p33 p35 p38 p42 p76 p79 p45 p47 p50 p51 p53 p55 p57 p59

0201 (0603)

0402 (1005)

0603 (1608)

0805 (2012)

0804 (2010)

1206 (3216)

0603 (1608)

0805 (2012)

0201 (0603)

0402 (1005)

0603 (1608)

0805 (2012)

1206 (3216)

1806 (4516)

0603 (1608)

0603 (1608)

5

5

5

10

10

10

10

22

22

22

22

33

47

47

47

75

75

60

75

75

120

120

240

600

470

600

470

47 60

75 140

120 150

220

330

420 600 1500 2200

470 1000 1800 2500

120

120

220

200

150 220

220

330

1000

1800

470 750

420 600

1500 2200 2700

1000 1800 2250

600

470 1000

120 220

600

470 1000

120 220

600

470

600

470

1000

1000 120 220

10 (1A)

33 (0.75A)

22 (0.9A)

30 (2.2A) 80 (1.5A)

60 (1.7A)120 (1.3A)

33 (3A)

30 (1A)

120 (2A)

60 (0.5A)

220 (1.4A)

180 (1.5A)

470 (1A)

330 (1.2A)

30 (3A)

22 (6A) 60 (3A)

220 (2A)

330 (1.5A)

50 (3A)

33 (6A)

26 (6A)

26 (6A)

120 (3A)

390 (2A)

600 (1.5A)

75 (3A)

60 (6A) 180 (3A)

470 (2A)

1000 (1.5A)

70 (3.5A) 220 (2.2A) 470 (1.5A)

120 (3A) 330 (1.7A) 600 (1.3A)

70 (4A) 220 (2.5A)

120 (3A) 330 (1.5A)

0402 (1005) 600 1000

BLM15HD

p65

0402 (1005) 600 1000 1800

BLM15HB

p65

0402 (1005) 120 220

BLM15EG*

BLM18HG

BLM18HE*

BLM18HD

p71

0402 (1005)

p67

0603 (1608)

p67

0603 (1608)

p67

0603 (1608)

220 (0.7A)

120 (1.5A)

600

470

600

470

1000

1000 (0.6A)

600 (0.8A) 1500 (0.5A)

1000

BLM18HB

p67

0603 (1608) 120 220 330

BLM18HK

BLM18EG*

p67 p72

0603 (1608)

0603 (1608)

330

600

470 1000

120 (2A) 330 (0.5A)

100 (2A) 220 (2A/1A)

470 (0.5A)

390 (0.5A) 600 (0.5A)

* The derating of rated current is required for some items according to the operating temperature on the each product page.

Effective Frequency Range

10kHz 100kHz 1MHz 10MHz 100MHz 1GHz 10GHz

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

8

C31E.pdf

09.4.20

Series

BLM15GG

BLM15GA

BLM18GG

Size Code

Inch (mm)

p74

0402 (1005)

p74

0402 (1005)

p75

0603 (1608)

10

Impedance (

) at 100MHz

100 1000

220 470

75

470

Effective Frequency Range

10kHz 100kHz 1MHz 10MHz 100MHz 1GHz 10GHz

NF

p

Series

NFM18C

NFM21C

NFM3DC

NFM41C

NFA31C

(4 circuits array)

NFM18P

NFM21P

p100

0603 (1608)

p101

0805 (2012)

p102

1205 (3212)

p103

1806 (4516)

p104 p105 p106

Size Code

Inch (mm)

1206 (3216)

0603 (1608)

p107

0805 (2012)

10p 100p

Capacitance (F)

1000p 10000p 0.1

µ

22 47 100 220

470 2200

1000

22 47 100 220

470 2200

1000

22 47 100 220

470 2200

1000

22 47 100 220

470 2200

1000

22 47 100 220

470 2200

1000

22000

22000

22000

22000

22000

1

µ

0.1

0.22

0.47

1.0

2.2

0.1

0.22

0.47

1.0

2.2

4.7

10

µ

NFM3DP*

p108

1205 (3212) 22000

NFM31P

p109

1206 (3216) 27

NFM41P

p110

1806 (4516) 0.2

1.5

NFM55P

p111

2220 (5750) 1.5

NFE31P

NFE61P

p112

1206 (3216)

p113

2706 (6816)

22 47 100 220

470 2200

1500

100

33 68 180

360 1000

680 4700

Effective Frequency Range

10kHz 100kHz 1MHz 10MHz 100MHz 1GHz 10GHz

Series

Size Code

Inch (mm)

p114

0603 (1608)

NFL18ST

NFL18SP

p115

0603 (1608)

NFL21S

p116

0805 (2012)

NFA18S

(4 circuits array)

p117

NFA21S

(4 circuits array)

p119 p121

NFW31S

0603 (1608)

0805 (2012)

1206 (3216)

NFR21G

p123

0805 (2012)

NFA31G

(4 circuits array)

p124

1206 (3216)

10

10

10

10

10

20

20

47 100

47 100

Cut-off Frequency (MHz)

100

200 300

500

500

150 200 300 500

50 70 100 150

50

50 80

130 180

200

200

300 400

500

300

400

480

200

280 310

300 330

50 100 150 200 300

400

500

* The derating of rated current is required for some items according to the operating temperature on the each product page.

Effective Frequency Range

10kHz 100kHz 1MHz 10MHz 100MHz 1GHz 10GHz

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

9

DL

p

Series

DLM11G

Size Code

Inch (mm)

p140

0504 (1210)

p141

1008 (2520)

Common Mode Impedance (

) at 100MHz

100 500 1000

600

DLM2HG

600

DLP0NS

DLP11S

p142

03025 (0806)

p143

0504 (1210)

67

90

35

67

90

p145

1206 (3216)

120

120 160 200

240

280 330

120 220

DLP31S

DLP2AD

(2 circuits array)

p146

DLP31D

(2 circuits array)

p147 p148

DLW21S

0804 (2010)

1206 (3216)

0805 (2012)

67

90

120 160

90 130

67

90

67

90

120 180

120 180

200

240

280

200 320 440

260 370

DLW21H

p150

0805 (2012)

p151

1206 (3216)

DLW31S

p152

DLW5BS* / DLW5AH

2020

(5050)

2014

(5036)

p153

DLW5BT*

2020 (5050)

90

100

160

190

260

250

350

550

500

600 1000 2200

1000

1500 4000

3000

1000

1400

Effective Frequency Range

10kHz 100kHz 1MHz 10MHz 100MHz 1GHz 10GHz

BNX

Series

BNX022*

BNX023*

BNX002

BNX003

BNX005

BNX012*

BNX016*

Height

(mm)

p165

3.1

p165

3.1

p166

18 max.

p166

18 max.

p166

18.5 max.

p167

12.0

p167

12.0

Rated Voltage

(Vdc)

50

100

50

150

50

50

25

Rated Current

(A)

10

15

10

10

15

15

15

* The derating of rated current is required for some items according to the operating temperature on the each product page.

Effective Frequency Range

10kHz 100kHz 1MHz 10MHz 100MHz 1GHz 10GHz

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

10

C31E.pdf

09.4.20

Chip Ferrite Bead

BL

Series Introduction

Part Numbering

Series Line Up

Product Detail

!Caution/Notice

Soldering and Mounting

Packaging

Design Kits

81

82

86

87

12

14

15

20

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

11

BL

p

Series Introduction

Example of Chip Ferrite Bead BLM Series Structure

Inner Electrode

Outer Electrode

Ferrite Sheet

Through Hole

Cross Section

Equivalent Circuit

Line Up Classification of

Chip Ferrite Bead

High-GHz Band

High

GHz Band

Noise

Frequency Band

BLM_G Series

BLM18G

p

BLM15G

p

BLM_H Series

BLM18H

p

BLM15H

p

1600

1400

1200

1000

800

600

400

200

0

1

Meet High-GHz

Band Noise

10 100

Frequency (MHz)

1000 10000

BLM_E Series

BLM18E

p

BLM15E

p

Low

Small

(Less than 1A)

BLM standard line up

BLM_P Series (for Power Lines)

•RK(for digital interfaces)

•AG (for general signal lines)

•B p (for high speed signal lines)

•Several amperes available

•AX(for general signal lines / power lines)

Rated Current

Large

(1A and more)

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

12

C31E.pdf

09.4.20

BL

p

Series Introduction

Difference between BLM A type and B type (HG type vs HD/HB type)

A type: Impedance curve rises from low frequency range. Suppress noise in wide frequency range.

B type: Impedance curve rises sharply. Less damage to signal waveforms.

c Comparison of Impedance Curve

1200

900

BLM18BD601SN1

600

300

0

1

BLM18AG601SN1

10 100

Frequency (MHz)

1000 c Comparison of Resistance Element

1200

900

BLM18BD601SN1

600

300

0

1

BLM18AG601SN1

10 100

Frequency (MHz)

1000 c Comparison of Test Effect (25MHz)

Test Circuit

29.7cm

Waveform test point

25MHz

OSC

1cm

Ferrite Bead

74HC04 74HC04

Pattern width 0.15cm

Line impedance 127

Both side glass epoxy PCB(

ε

4.7)

All of back side is GND PCB thickness=0.6mm

74HC00

Waveform

BLM_B Series has less damage to high speed signal waveform.

No filter BLM18AG601SN1 BLM18BD601SN1 Small Distortion

Spectrum

Spectrum has been reduced from low frequency range.

Noise frequency has been reduced without reducing signals of low frequency.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

13

BL

p

Chip Ferrite Bead

(Part Number)

BL

q

M

w qProduct ID

Product ID

18

e

BL

wType

Code

A

M

AG

r

Part Numbering

102 S

t y

N

u

1

i

D

o

Chip Ferrite Beads

Type

Array Type

Ferrite Bead Single Type tImpedance

Expressed by three figures. The unit is in ohm (

) at 100MHz. The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures.

yElectrode

Expressed by a letter.

Ex.)

Code

S/T

A

Electrode

Sn Plating

Au Plating eDimensions (LgW)

Code

2A

21

31

02

03

15

18

41

Dimensions (LgW)

0.4g0.2mm

0.6g0.3mm

1.0g0.5mm

1.6g0.8mm

2.0g1.0mm

2.0g1.25mm

3.2g1.6mm

4.5g1.6mm

EIA

01005

0201

0402

0603

0804

0805

1206

1806 uCategory

Code

N

iNumber of Circuits

Code

1

4

Category

Standard Type

Number of Circuits

1 Circuit

4 Circuits rCharacteristics/Applications

Code

*

1

Characteristics/Applications

AG

AX

for General Use

TG

BA

BB

BD

PD

for High-speed Signal Lines for Power Supplies

PG

KG

SG

RK

HG

EG

HB

for Power Supplies (Low DC Resistance Type) for Digital Interface for GHz Band General Use for GHz Band General Use (Low DC Resistance Type)

HD

HE

for GHz Band High-speed Signal Lines

HK

GA

for GHz Band Digital Interface for High-GHz Band High-speed Signal Lines

GG

for High-GHz Band General Use

*

1

Frequency characteristics vary with each code.

oPackaging

Code

K

L

B

J

Packaging

Embossed Taping (ø330mm Reel)

Embossed Taping (ø180mm Reel)

Bulk

Paper Taping (ø330mm Reel)

D

Paper Taping (ø180mm Reel)

*

1

BLM21BD222SN1/BLM21BD272SN1 only.

*

2

Except BLM21BD222SN1/BLM21BD272SN1

*

3

Except BLM18T

Series

BLM02/03/15/18/21, BLA2A/31

BLM15

BLM18

BLM15/18

BLM03/15/18/21, BLA2A

BLM03/15/18/21, BLA2A/31

BLM15

BLM03/15/18/21/31/41

BLM18

BLM18

BLM18/21

BLM15/18

BLM15/18

BLM18

BLM15

BLM15/18

BLM21

*

1

/31/41

Series

All Series

BLM03/15/18

*

3

/21

*

2

, BLA2A/31

BLM02/03/15/18/21

*

2

, BLA2A/31

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

14

C31E.pdf

09.4.20

BL

p

Chip Ferrite Bead

Size

(Inch)

Type

p20

01005 For General Signal

0201

0402

For General Signal

For High Speed Signal

(Sharp Impedance Curve)

For Large Current

For General Signal

For High Speed Signal

(Sharp Impedance Curve)

For Large Current

Series Line Up

p21 p33 p50 p23 p26 p35 p51

Part Number

BLM03PG330SN1

BLM15AG100SN1

BLM15AG700SN1

BLM15AG121SN1

BLM15AG221SN1

BLM15AG601SN1

BLM15AG102SN1

BLM15AX100SN1

BLM15AX700SN1

BLM15AX121SN1

BLM15AX221SN1

BLM15AX601SN1

BLM15AX102SN1

BLM15BD750SN1

BLM15BD121SN1

BLM15BD221SN1

BLM15BD471SN1

BLM15BD601SN1

BLM15BD102SN1

BLM15BD182SN1

BLM15BB050SN1

BLM15BB100SN1

BLM15BB220SN1

BLM15BB470SN1

BLM15BB750SN1

BLM15BB121SN1

BLM15BB221SN1

BLM15BA050SN1

BLM02AG100SN1

BLM02AG700SN1

BLM02AG121SN1

BLM03AG100SN1

BLM03AG700SN1

BLM03AG800SN1

BLM03AG121SN1

BLM03AG241SN1

BLM03AG601SN1

BLM03AG102SN1

BLM03BD750SN1

BLM03BD121SN1

BLM03BD241SN1

BLM03BD471SN1

BLM03BD601SN1

BLM03BB100SN1

BLM03BB220SN1

BLM03BB470SN1

BLM03BB750SN1

BLM03BB121SN1

BLM03PG220SN1

BLM15BA100SN1

BLM15BA220SN1

BLM15BA330SN1

BLM15BA470SN1

BLM15BA750SN1

BLM15PG100SN1

BLM15PD300SN1

BLM15PD600SN1

BLM15PD800SN1

BLM15PD121SN1

70ohm(Typ.)

120ohm

±

25%

220ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

10ohm(Typ.)

70ohm

±

25%

120ohm

±

25%

220ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

75ohm

±

25%

120ohm

±

25%

220ohm

±

25%

470ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

1800ohm

±

25%

5ohm

±

25%

10ohm

±

25%

22ohm

±

25%

47ohm

±

25%

75ohm

±

25%

120ohm

±

25%

220ohm

±

25%

5ohm

±

25%

10ohm

±

25%

22ohm

±

25%

33ohm

±

25%

47ohm

±

25%

75ohm

±

25%

10ohm(Typ.)

30ohm

±

25%

60ohm

±

25%

80ohm

±

25%

120ohm

±

25%

Impedance at 100MHz/20

°

C at 1GHz/20

°

C

10ohm(Typ.)

70ohm

±

25%

120ohm

±

25%

-

-

10ohm(Typ.) -

70ohm(Typ.)

80ohm

±

25%

120ohm

±

25%

240ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

75ohm

±

25%

120ohm

±

25%

240ohm

±

25%

470ohm

±

25%

600ohm

±

25%

10ohm

±

25%

22ohm

±

25%

47ohm

±

25%

75ohm

±

25%

120ohm

±

25%

22ohm

±

25%

33ohm

±

25%

10ohm(Typ.)

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

300mA

300mA

300mA

200mA

200mA

200mA

100mA

500mA

300mA

300mA

300mA

300mA

300mA

200mA

300mA

750mA

1000mA

500mA

500mA

300mA

300mA

200mA

1740mA

780mA

680mA

580mA

420mA

350mA

300mA

300mA

300mA

200mA

200mA

1000mA

2200mA

1700mA

1500mA

1300mA

200mA

100mA

100mA

300mA

250mA

200mA

215mA

200mA

300mA

200mA

200mA

200mA

100mA

900mA

Rated

Current

500mA

250mA

200mA

500mA

200mA

200mA

200mA

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

15

BL

p

Chip Ferrite Bead

Series Line Up

Size

(Inch)

Type

p65

For General Signal

p65

For GHz

Band Noise

For High Speed Signal

(Sharp Impedance Curve)

0402

For General Signal

For Large Current

p71

For High-GHz

Band Noise

p74

For General Signal

For High Speed Signal

p74 p28

0603

For General Signal

For High Speed Signal

(Sharp Impedance Curve)

For Digital Interface

p32 p38 p45

Part Number

BLM18BD421SN1

BLM18BD471SN1

BLM18BD601SN1

BLM18BD102SN1

BLM18BD152SN1

BLM18BD182SN1

BLM18BD222SN1

BLM18BD252SN1

BLM18BB050SN1

BLM18BB100SN1

BLM18BB220SN1

BLM18BB470SN1

BLM18BB600SN1

BLM18BB750SN1

BLM18BB121SN1

BLM18BB141SN1

BLM18BB151SN1

BLM18BB221SN1

BLM18BB331SN1

BLM18BB471SN1

BLM18BA050SN1

BLM18BA100SN1

BLM15HG601SN1

BLM15HG102SN1

BLM15HD601SN1

BLM15HD102SN1

BLM15HD182SN1

BLM15HB121SN1

BLM15HB221SN1

BLM15EG121SN1

BLM15EG221SN1

BLM15GG221SN1

BLM15GG471SN1

BLM15GA750SN1

BLM18AG121SN1

BLM18AG151SN1

BLM18AG221SN1

BLM18AG331SN1

BLM18AG471SN1

BLM18AG601SN1

BLM18AG102SN1

BLM18TG121TN1

BLM18TG221TN1

BLM18TG601TN1

BLM18TG102TN1

BLM18BD470SN1

BLM18BD121SN1

BLM18BD151SN1

BLM18BD221SN1

BLM18BD331SN1

BLM18BA220SN1

BLM18BA470SN1

BLM18BA750SN1

BLM18BA121SN1

BLM18RK121SN1

BLM18RK221SN1

BLM18RK471SN1

BLM18RK601SN1

BLM18RK102SN1

Impedance Rated

600ohm

±

25%

1000ohm

±

25%

1500ohm

±

25%

1800ohm

±

25%

2200ohm

±

25%

2500ohm

±

25%

5ohm

±

25%

10ohm

±

25%

22ohm

±

25%

47ohm

±

25%

60ohm

±

25%

75ohm

±

25%

120ohm

±

25%

140ohm

±

25%

150ohm

±

25%

220ohm

±

25%

330ohm

±

25%

470ohm

±

25%

5ohm

±

25%

10ohm

±

25%

22ohm

±

25%

47ohm

±

25%

75ohm

±

25%

120ohm

±

25%

120ohm

±

25%

220ohm

±

25%

470ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

at 100MHz/20

°

C at 1GHz/20

°

C

600ohm

±

25% 1000ohm

±

40%

Current

300mA

1000ohm

±

25% 1400ohm

±

40% 250mA

600ohm

±

25% 1400ohm

±

40% 300mA

1000ohm

±

25% 2000ohm

±

40% 250mA

1800ohm

±

25% 2700ohm

±

40% 200mA

120ohm

±

25%

220ohm

±

25%

500ohm

±

40%

900ohm

±

40%

300mA

250mA

120ohm

±

25%

220ohm

±

25%

145ohm(Typ.)

270ohm(Typ.)

1500mA

700mA

220ohm

470ohm

75ohm

±

±

±

25%

25%

25%

120ohm

±

25%

150ohm

±

25%

220ohm

±

25%

330ohm

±

25%

600ohm

±

40% 300mA

1200ohm

±

40% 200mA

1000ohm

±

40% 200mA

-

-

-

-

500mA

500mA

500mA

500mA

470ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

120ohm

±

25%

220ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

47ohm

±

25%

120ohm

±

25%

150ohm

±

25%

220ohm

±

25%

330ohm

±

25%

420ohm

±

25%

470ohm

±

25%

-

-

-

-

-

-

-

-

-

-

-

-

-

-

500mA

500mA

400mA

200mA

200mA

200mA

100mA

500mA

200mA

200mA

200mA

200mA

200mA

200mA

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

200mA

100mA

50mA

50mA

50mA

50mA

700mA

700mA

600mA

550mA

550mA

500mA

500mA

450mA

450mA

450mA

400mA

300mA

500mA

500mA

500mA

300mA

300mA

200mA

200mA

200mA

200mA

200mA

200mA

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

16

C31E.pdf

09.4.20

BL

p

Chip Ferrite Bead

Series Line Up

Size

(Inch)

0603

0805

For Large

Current

For GHz

Band Noise

Type

Standard Type

For High Speed

Signal

(Sharp Impedance

Curve)

p67

For Digital Interface

For General Signal

For Large Current

For General Signal

p53 p61

Low DC Resistance

Type

p63 p67

For General Signal

p67 p72

For High-GHz Band Noise

p75 p30

Part Number

BLM18HE601SN1

BLM18HE102SN1

BLM18HE152SN1

BLM18HD471SN1

BLM18HD601SN1

BLM18HD102SN1

BLM18HB121SN1

BLM18HB221SN1

BLM18HB331SN1

BLM18HK331SN1

BLM18HK471SN1

BLM18HK601SN1

BLM18HK102SN1

BLM18EG101TN1

BLM18EG121SN1

BLM18EG221SN1

BLM18EG221TN1

BLM18EG331TN1

BLM18EG391TN1

BLM18EG471SN1

BLM18EG601SN1

BLM18GG471SN1

BLM21AG121SN1

BLM21AG151SN1

BLM21AG221SN1

BLM21AG331SN1

BLM21AG471SN1

BLM21AG601SN1

BLM21AG102SN1

BLM18PG300SN1

BLM18PG330SN1

BLM18PG600SN1

BLM18PG121SN1

BLM18PG181SN1

BLM18PG221SN1

BLM18PG331SN1

BLM18PG471SN1

BLM18KG260TN1

BLM18KG700TN1

BLM18KG121TN1

BLM18KG221SN1

BLM18KG331SN1

BLM18KG471SN1

BLM18KG601SN1

BLM18SG260TN1

BLM18SG700TN1

BLM18SG121TN1

BLM18SG221TN1

BLM18SG331TN1

BLM18HG471SN1

BLM18HG601SN1

BLM18HG102SN1

Impedance at 100MHz/20

°

C at 1GHz/20

°

C

30ohm(Typ.)

33ohm

±

25%

-

-

Rated

Current

1000mA

3000mA

60ohm(Typ.) 500mA

120ohm

±

25%

180ohm

±

25%

220ohm

±

25%

330ohm

±

25%

470ohm

±

25%

26ohm

±

25%

70ohm

±

25%

120ohm

±

25%

220ohm

±

25%

330ohm

±

25%

470ohm

±

25%

600ohm

±

25%

26ohm

±

25%

70ohm

±

25%

-

-

-

-

-

-

-

-

-

-

-

-

-

-

2000mA

1500mA

1400mA

1200mA

1000mA

6000mA

3500mA

3000mA

2200mA

1700mA

1500mA

1300mA

6000mA

4000mA

120ohm

±

25%

220ohm

±

25%

330ohm

±

25%

470ohm

±

25%

-

-

-

600ohm(Typ.)

3000mA

2500mA

1500mA

200mA

600ohm

±

25% 700ohm(Typ.) 200mA

1000ohm

±

25% 1000ohm(Typ.) 100mA

600ohm

±

25% 600ohm(Typ.) 800mA

1000ohm

±

25% 1000ohm(Typ.) 600mA

1500ohm

±

25% 1500ohm(Typ.) 500mA

470ohm

±

25%

600ohm

±

25%

1000ohm(Typ.)

1200ohm(Typ.)

100mA

100mA

1000ohm

±

25% 1700ohm(Typ.)

120ohm

±

25%

220ohm

±

25%

330ohm

±

25%

500ohm

±

1600ohm

±

40%

40%

50mA

200mA

1100ohm

±

40% 100mA

50mA

330ohm

±

25%

470ohm

±

25%

400ohm

±

40%

600ohm

±

40%

600ohm

±

25% 700ohm

±

40%

1000ohm

±

25% 1200ohm

±

40%

100ohm

±

25%

120ohm

±

25%

220ohm

±

25%

140ohm(Typ.)

145ohm(Typ.)

260ohm(Typ.)

200mA

200mA

100mA

50mA

2000mA

2000mA

2000mA

220ohm

±

25%

330ohm

±

25%

390ohm

±

25%

470ohm

±

25%

600ohm

±

25%

470ohm

±

25%

120ohm

±

25%

300ohm(Typ.)

450ohm(Typ.)

520ohm(Typ.)

550ohm(Typ.)

700ohm(Typ.)

1800ohm

-

±

30%

1000mA

500mA

500mA

500mA

500mA

200mA

200mA

150ohm

±

25%

220ohm

±

25%

330ohm

±

25%

470ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

-

-

-

-

-

-

200mA

200mA

200mA

200mA

200mA

200mA

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

17

BL

p

Chip Ferrite Bead

Series Line Up

Size

(Inch)

0805

1206

1806

0804

Type

For High Speed Signal

(Sharp Impedance Curve)

For Digital Interface

For Large Current

For Large Current

For Large Current

For General Signal

For High Speed Signal

p42 p47 p55 p57 p59 p76 p76

Part Number

BLM21BD121SN1

BLM21BD151SN1

BLM21BD221SN1

BLM21BD331SN1

BLM21BD421SN1

BLM21BD471SN1

BLM21BD601SN1

BLM21BD751SN1

BLM21BD102SN1

BLM21BD152SN1

BLM21BD182SN1

BLM21BD222TN1

BLM21BD222SN1

BLM21BD272SN1

BLM21BB050SN1

BLM21BB600SN1

BLM21BB750SN1

BLM21BB121SN1

BLM21BB151SN1

BLM21BB201SN1

BLM21BB221SN1

BLM21BB331SN1

BLM21BB471SN1

BLM21RK121SN1

BLM21RK221SN1

BLM21RK471SN1

BLM21RK601SN1

BLM21RK102SN1

BLM21PG220SN1

BLM21PG300SN1

BLM21PG600SN1

BLM21PG221SN1

BLM21PG331SN1

BLM31PG330SN1

BLM31PG500SN1

BLM31PG121SN1

BLM31PG391SN1

BLM31PG601SN1

BLM41PG600SN1

BLM41PG750SN1

BLM41PG181SN1

BLM41PG471SN1

BLM41PG102SN1

BLA2AAG121SN4

BLA2AAG221SN4

BLA2AAG601SN4

BLA2AAG102SN4

BLA2ABB100SN4

BLA2ABB220SN4

BLA2ABB470SN4

BLA2ABB121SN4

BLA2ABB221SN4

BLA2ABD750SN4

BLA2ABD121SN4

BLA2ABD221SN4

BLA2ABD471SN4

BLA2ABD601SN4

BLA2ABD102SN4

75ohm(Typ.)

180ohm

±

25%

470ohm

±

25%

1000ohm

±

25%

120ohm

±

25%

220ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

10ohm

±

25%

22ohm

±

25%

47ohm

±

25%

120ohm

±

25%

220ohm

±

25%

75ohm

±

25%

120ohm

±

25%

220ohm

±

25%

470ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

Impedance at 100MHz/20

°

C at 1GHz/20

°

C

120ohm

±

25% -

150ohm

±

25% -

220ohm

±

25%

330ohm

±

25%

420ohm

±

25%

470ohm

±

25%

600ohm

±

25%

750ohm

±

25%

-

-

-

-

-

-

1000ohm

±

25%

1500ohm

±

25%

1800ohm

±

25%

2200ohm

±

25%

-

-

-

-

2250ohm(Typ.)

2700ohm

±

25%

5ohm

±

25%

60ohm

±

25%

75ohm

±

25%

120ohm

±

25%

150ohm

±

25%

200ohm

±

25%

220ohm

±

25%

330ohm

±

25%

470ohm

±

25%

120ohm

±

25%

220ohm

±

25%

470ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

22ohm

±

25%

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

30ohm(Typ.)

60ohm

±

25%

220ohm

±

25%

330ohm

±

25%

33ohm

±

25%

50ohm(Typ.)

120ohm

±

25%

390ohm

±

25%

600ohm

±

25%

60ohm(Typ.)

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

6000mA

3000mA

3000mA

2000mA

1500mA

6000mA

3000mA

3000mA

2000mA

1500mA

6000mA

3000mA

3000mA

2000mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

1500mA

100mA

50mA

50mA

50mA

200mA

200mA

200mA

50mA

50mA

200mA

200mA

100mA

100mA

100mA

50mA

Rated

Current

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

500mA

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

18

C31E.pdf

09.4.20

Size

(Inch)

1206

BL

p

Chip Ferrite Bead

Series Line Up

Type

For General Signal

For High Speed Signal

p79 p79

Part Number

BLA31AG300SN4

BLA31AG600SN4

BLA31AG121SN4

BLA31AG221SN4

BLA31AG601SN4

BLA31AG102SN4

BLA31BD121SN4

BLA31BD221SN4

BLA31BD471SN4

BLA31BD601SN4

BLA31BD102SN4

Impedance at 100MHz/20

°

C at 1GHz/20

°

C

30ohm

±

25% -

60ohm

±

25%

120ohm

±

25%

-

-

220ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

120ohm

±

25%

220ohm

±

25%

470ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

-

-

-

-

-

-

-

-

Rated

Current

200mA

200mA

150mA

150mA

100mA

50mA

150mA

150mA

100mA

100mA

50mA

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

19

BLM Series Chip Ferrite Bead

BLM02A

Series (01005 Size)

Ultra small 01005 size for general signal lines.

Dimensions

0.4

±

0.02

0.2

±

0.02

Equivalent Circuit

(Resistance element becomes dominant at high frequencies.)

0.10+0.04/–0.03

Rated Value (p: packaging code)

Part Number

Impedance

(at 100MHz/20

°

C)

Rated Current

BLM02AG100SN1

p

BLM02AG700SN1

p

BLM02AG121SN1

p

Number of Circuits: 1

10ohm(Typ.)

70ohm

±

25%

120ohm

±

25%

500mA

250mA

200mA

Impedance-Frequency Characteristics (Main Items)

250

200

BLM02AG121SN1

150

100

BLM02AG700SN1

BLM02AG100SN1

50

0

1 10 100

Frequency (MHz)

1000 3000

Impedance-Frequency Characteristics

BLM02AG100SN1

20

15

10

5

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

: Electrode

(in mm)

Packaging

Code Packaging

D

180mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

20000

1000

Refer to pages from p.82 to p.85 for mounting information.

DC Resistance

(max.)

0.1ohm

0.5ohm

0.8ohm

BLM02AG700SN1

200

150

100

50

0

1

Z

X

R

10 100

Frequency (MHz)

1000 3000

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

BLM02AG121SN1

250

200

150

100

50

0

1

Z

X

R

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

20

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM03A

Series (0201 Size)

0201 size for general signal lines.

Dimensions

0.6

±

0.03

Equivalent Circuit

0.3

±

0.03

0.15

±

0.05

: Electrode

(in mm)

(Resistance element becomes dominant at high frequencies.)

Packaging

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

15000

50000

1000

Refer to pages from p.82 to p.85 for mounting information.

Rated Value (p: packaging code)

Part Number

BLM03AG100SN1

p

BLM03AG700SN1

p

BLM03AG800SN1

p

BLM03AG121SN1

p

BLM03AG241SN1

p

BLM03AG601SN1

p

BLM03AG102SN1

p

Number of Circuits: 1

Impedance

(at 100MHz/20

°

C)

10ohm(Typ.)

70ohm(Typ.)

80ohm

±

25%

120ohm

±

25%

240ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

Rated Current

Impedance-Frequency Characteristics (Main Items)

1500

BLM03AG102SN1

1250

BLM03AG601SN1

BLM03AG241SN1

1000

BLM03AG121SN1

BLM03AG800SN1

750

500mA

200mA

200mA

200mA

200mA

100mA

100mA

500

BLM03AG700SN1

BLM03AG100SN1

250

0

1 10 100

Frequency (MHz)

1000 3000

Impedance-Frequency Characteristics

DC Resistance

(max.)

0.1ohm

0.4ohm

0.4ohm

0.5ohm

0.8ohm

1.5ohm

2.5ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

BLM03AG100SN1

20

15

10

5

0

1

R

Z

X

10 100

Frequency (MHz)

1000 3000

BLM03AG700SN1

120

100

80

60

40

20

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM03AG800SN1

160

120

80

40

0

1

R

Z

X

10 100

Frequency (MHz)

1000 3000

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

21

BLM Series Chip Ferrite Bead

BLM03A Series (0201 Size)

Impedance-Frequency Characteristics

BLM03AG121SN1

200

160

120

80

40

0

1

R

Z

X

10 100

Frequency (MHz)

1000 3000

BLM03AG102SN1

1500

1200

900

600

300

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM03AG241SN1

500

400

300

200

100

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM03AG601SN1

1000

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

22

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM15AG

Series (0402 Size)

0402 size for general signal lines.

Dimensions

0.25

±

0.1

Equivalent Circuit

1.0

±

0.05

Rated Value (p: packaging code)

Part Number

BLM15AG100SN1

p

BLM15AG700SN1

p

BLM15AG121SN1

p

BLM15AG221SN1

p

BLM15AG601SN1

p

BLM15AG102SN1

p

Number of Circuits: 1

Impedance

(at 100MHz/20

°

C)

10ohm(Typ.)

70ohm(Typ.)

120ohm

±

25%

220ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

Rated Current

1000mA

500mA

500mA

300mA

300mA

200mA

Impedance-Frequency Characteristics (Main Items)

1200

BLM15AG102SN1

1000

800

BLM15AG601SN1

600

400

200

BLM15AG221SN1

BLM15AG121SN1

BLM15AG700SN1

BLM15AG100SN1

0

1 10 100

Frequency (MHz)

1000 3000

Impedance-Frequency Characteristics

0.5

±

0.05

: Electrode

(in mm)

(Resistance element becomes dominant at high frequencies.)

Packaging

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

10000

50000

1000

Refer to pages from p.82 to p.85 for mounting information.

DC Resistance

(max.)

0.05ohm

0.15ohm

0.25ohm

0.35ohm

0.6ohm

1.0ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

BLM15AG100SN1

20

15

10

5

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM15AG700SN1

120

100

80

60

40

20

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM15AG121SN1

200

150

100

50

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

23

BLM Series Chip Ferrite Bead

BLM15AG Series (0402 Size)

Impedance-Frequency Characteristics

BLM15AG221SN1

400

300

200

100

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM15AG601SN1

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM15AG102SN1

1200

900

600

300

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

24

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM15AG_AN

Series Gold Plating (0402 Size)

Au plating electrode for wire bonding mount.

Dimensions

0.25

±

0.1

Equivalent Circuit

1.0

±

0.05

0.5

±

0.05

: Electrode

(in mm)

(Resistance element becomes dominant at high frequencies.)

Packaging

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

10000

50000

1000

Refer to pages from p.82 to p.85 for mounting information.

Rated Value (p: packaging code)

Part Number

Impedance

(at 100MHz/20

°

C)

Rated Current

DC Resistance

(max.)

BLM15AG601AN1

BLM15AG102AN1

p p

600ohm

±

25%

1000ohm

±

25%

300mA

200mA

Number of Circuits: 1

This product is Au plating version designed for wire bonding mount. Be sure that this product is not designed for solder mounting.

0.6ohm

1.0ohm

Impedance-Frequency Characteristics (Main Items)

1200

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

1000

800

600

400

200

0

1

BLM15AG102AN1

BLM15AG601AN1

10 100

Frequency (MHz)

1000 3000

Impedance-Frequency Characteristics

BLM15AG601AN1

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM15AG102AN1

1200

1000

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

25

BLM Series Chip Ferrite Bead

BLM15AX

Series (0402 Size)

Low DC resistance, large current. Small characteristics change.

Dimensions

0.25

±

0.1

Equivalent Circuit

1.0

±

0.05

Rated Value (p: packaging code)

Part Number

BLM15AX100SN1

p

BLM15AX700SN1

p

BLM15AX121SN1

p

BLM15AX221SN1

p

BLM15AX601SN1

p

BLM15AX102SN1

p

Number of Circuits: 1

Impedance

(at 100MHz/20

°

C)

10ohm(Typ.)

70ohm

±

25%

120ohm

±

25%

220ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

Rated Current

1740mA

780mA

680mA

580mA

420mA

350mA

Impedance-Frequency Characteristics (Main Items)

1500

BLM15AX102SN1

1200

BLM15AX601SN1

900

BLM15AX221SN1

600

BLM15AX121SN1

BLM15AX700SN1

300 BLM15AX100SN1

0.5

±

0.05

: Electrode

(in mm)

(Resistance element becomes dominant at high frequencies.)

Packaging

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

10000

50000

1000

Refer to pages from p.82 to p.85 for mounting information.

DC Resistance

(max.)

0.02ohm

0.1ohm

0.13ohm

0.18ohm

0.34ohm

0.49ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

0

1 10 100

Frequency (MHz)

1000 3000

Impedance-Frequency Characteristics

BLM15AX100SN1

16

12

8

4

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM15AX700SN1

120

100

80

60

40

20

0

1

Z

R

10 100

Frequency (MHz)

X

1000 3000

BLM15AX121SN1

200

160

120

80

40

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

26

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM15AX Series (0402 Size)

Impedance-Frequency Characteristics

BLM15AX221SN1

400

300

200

100

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM15AX601SN1

1000

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM15AX102SN1

1500

1200

900

600

300

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

27

BLM Series Chip Ferrite Bead

BLM18A

Series (0603 Size)

0603 size for general signal lines.

Dimensions

0.4

±

0.2

Equivalent Circuit

1.6

±

0.15

Rated Value (p: packaging code)

Part Number

BLM18AG121SN1

p

BLM18AG151SN1

p

BLM18AG221SN1

p

BLM18AG331SN1

p

BLM18AG471SN1

p

BLM18AG601SN1

p

BLM18AG102SN1

p

Number of Circuits: 1

Impedance

(at 100MHz/20

°

C)

120ohm

±

25%

150ohm

±

25%

220ohm

±

25%

330ohm

±

25%

470ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

Rated Current

500mA

500mA

500mA

500mA

500mA

500mA

400mA

Impedance-Frequency Characteristics (Main Items)

1200

BLM18AG102SN1

900

600

BLM18AG601SN1

BLM18AG471SN1

BLM18AG331SN1

BLM18AG221SN1

BLM18AG151SN1

BLM18AG121SN1

300

0.8

±

0.15

: Electrode

(in mm)

(Resistance element becomes dominant at high frequencies.)

Packaging

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

4000

10000

1000

Refer to pages from p.82 to p.85 for mounting information.

DC Resistance

(max.)

0.18ohm

0.25ohm

0.25ohm

0.30ohm

0.35ohm

0.38ohm

0.50ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

0

1 10 100

Frequency (MHz)

1000 3000

Impedance-Frequency Characteristics

BLM18AG121SN1

200

150

100

50

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18AG151SN1

400

300

200

100

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18AG221SN1

400

300

200

100

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

28

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM18A Series (0603 Size)

Impedance-Frequency Characteristics

BLM18AG331SN1

600

450

300

150

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18AG102SN1

1200

900

600

300

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18AG471SN1

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18AG601SN1

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

29

BLM Series Chip Ferrite Bead

BLM21A

Series (0805 Size)

0805 size for general signal lines.

Dimensions

0.5

±

0.2

Equivalent Circuit

2.0

±

0.2

Rated Value (p: packaging code)

Part Number

BLM21AG121SN1

p

BLM21AG151SN1

p

BLM21AG221SN1

p

BLM21AG331SN1

p

BLM21AG471SN1

p

BLM21AG601SN1

p

BLM21AG102SN1

p

Number of Circuits: 1

Impedance

(at 100MHz/20

°

C)

120ohm

±

25%

150ohm

±

25%

220ohm

±

25%

330ohm

±

25%

470ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

Rated Current

200mA

200mA

200mA

200mA

200mA

200mA

200mA

Impedance-Frequency Characteristics (Main Items)

1200

900

600

BLM21AG102SN1

BLM21AG601SN1

BLM21AG471SN1

BLM21AG331SN1

BLM21AG221SN1

BLM21AG151SN1

BLM21AG121SN1

300

1.25

±

0.2

EIA CODE : 0805

: Electrode

(in mm)

(Resistance element becomes dominant at high frequencies.)

Packaging

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

4000

10000

1000

Refer to pages from p.82 to p.85 for mounting information.

DC Resistance

(max.)

0.15ohm

0.15ohm

0.20ohm

0.25ohm

0.25ohm

0.30ohm

0.45ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

0

1 10 100

Frequency (MHz)

1000 3000

Impedance-Frequency Characteristics

BLM21AG121SN1

200

150

100

50

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM21AG151SN1

200

150

100

50

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM21AG221SN1

400

300

200

100

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

30

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM21A Series (0805 Size)

Impedance-Frequency Characteristics

BLM21AG331SN1

400

300

200

100

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM21AG102SN1

1200

900

600

300

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM21AG471SN1

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM21AG601SN1

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

31

BLM Series Chip Ferrite Bead

BLM18T

Series (0603 Size)

Thin 0603 size for general signal lines.

Dimensions

1.6

±

0.15

0.8

±

0.15

Equivalent Circuit

(Resistance element becomes dominant at high frequencies.)

0.4

±

0.2

Rated Value (p: packaging code)

Part Number

BLM18TG121TN1

p

BLM18TG221TN1

p

BLM18TG601TN1

p

BLM18TG102TN1

p

Number of Circuits: 1

Impedance

(at 100MHz/20

°

C)

120ohm

±

25%

220ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

Impedance-Frequency Characteristics (Main Items)

1200

Rated Current

200mA

200mA

200mA

100mA

1000

800

600

BLM18TG102TN1

BLM18TG601TN1

BLM18TG221TN1

BLM18TG121TN1

400

200

0

1 10 100

Frequency (MHz)

1000 3000

: Electrode

(in mm)

Packaging

Code Packaging

D

180mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

10000

1000

Refer to pages from p.82 to p.85 for mounting information.

DC Resistance

(max.)

0.25ohm

0.30ohm

0.45ohm

0.60ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

Impedance-Frequency Characteristics

BLM18TG121TN1

150

120

90

60

30

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18TG221TN1

300

250

200

150

100

50

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18TG601TN1

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18TG102TN1

1200

1000

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

32

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM03B

Series (0201 Size)

0201 size for high speed signal lines.

Dimensions

0.6

±

0.03

Equivalent Circuit

0.3

±

0.03

0.15

±

0.05

: Electrode

(in mm)

(Resistance element becomes dominant at high frequencies.)

Packaging

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

15000

50000

1000

Refer to pages from p.82 to p.85 for mounting information.

Rated Value (p: packaging code)

Part Number

BLM03BD750SN1

p

BLM03BD121SN1

p

BLM03BD241SN1

p

BLM03BD471SN1

p

BLM03BD601SN1

p

BLM03BB100SN1

p

BLM03BB220SN1

p

BLM03BB470SN1

p

BLM03BB750SN1

p

BLM03BB121SN1

p

Number of Circuits: 1

Impedance

(at 100MHz/20

°

C)

75ohm

±

25%

120ohm

±

25%

240ohm

±

25%

470ohm

±

25%

600ohm

±

25%

10ohm

±

25%

22ohm

±

25%

47ohm

±

25%

75ohm

±

25%

120ohm

±

25%

Rated Current

300mA

250mA

200mA

215mA

200mA

300mA

200mA

200mA

200mA

100mA

Impedance-Frequency Characteristics (Main Items)

BLM03BD Series

1200

BLM03BB Series

800

DC Resistance

(max.)

0.4ohm

0.5ohm

0.8ohm

1.5ohm

1.7ohm

0.4ohm

0.5ohm

0.7ohm

1.0ohm

1.5ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

1000

800

600

400

200

BLM03BD601SN1

BLM03BD471SN1

BLM03BD241SN1

BLM03BD121SN1

BLM03BD750SN1

600

400

200

BLM03BB121SN1

BLM03BB750SN1

BLM03BB470SN1

BLM03BB220SN1

BLM03BB100SN1

0

1 10 100

Frequency (MHz)

1000 3000

0

1 10 100

Frequency (MHz)

1000 3000

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

33

BLM Series Chip Ferrite Bead

BLM03B Series (0201 Size)

Impedance-Frequency Characteristics

BLM03BD750SN1

200

150

100

50

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM03BD471SN1

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM03BB220SN1

200

150

100

50

0

1

R

Z

X

10 100

Frequency (MHz)

1000 3000

BLM03BB121SN1

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM03BD121SN1

300

240

180

120

60

0

1

Z

X

R

10 100

Frequency (MHz)

1000 3000

BLM03BD601SN1

1000

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM03BB470SN1

400

300

200

100

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM03BD241SN1

500

400

300

200

100

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM03BB100SN1

80

60

40

20

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM03BB750SN1

600

450

300

150

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

34

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM15B

Series (0402 Size)

0402 size for high speed signal lines.

Dimensions

0.25

±

0.1

Equivalent Circuit

Rated Value (p: packaging code)

Part Number

BLM15BD750SN1

p

BLM15BD121SN1

p

BLM15BD221SN1

p

BLM15BD471SN1

p

BLM15BD601SN1

p

BLM15BD102SN1

p

BLM15BD182SN1

p

BLM15BB050SN1

p

BLM15BB100SN1

p

BLM15BB220SN1

p

BLM15BB470SN1

p

BLM15BB750SN1

p

BLM15BB121SN1

p

BLM15BB221SN1

p

BLM15BA050SN1

p

BLM15BA100SN1

p

BLM15BA220SN1

p

BLM15BA330SN1

p

BLM15BA470SN1

p

BLM15BA750SN1

p

Number of Circuits: 1

Impedance

(at 100MHz/20

°

C)

75ohm

±

25%

120ohm

±

25%

220ohm

±

25%

470ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

1800ohm

±

25%

5ohm

±

25%

10ohm

±

25%

22ohm

±

25%

47ohm

±

25%

75ohm

±

25%

120ohm

±

25%

220ohm

±

25%

5ohm

±

25%

10ohm

±

25%

22ohm

±

25%

33ohm

±

25%

47ohm

±

25%

75ohm

±

25%

1.0

±

0.05

Rated Current

300mA

300mA

200mA

300mA

300mA

300mA

300mA

200mA

200mA

300mA

300mA

300mA

200mA

200mA

200mA

100mA

500mA

300mA

300mA

300mA

0.5

±

0.05

: Electrode

(in mm)

(Resistance element becomes dominant at high frequencies.)

Packaging

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

10000

50000

1000

Refer to pages from p.82 to p.85 for mounting information.

DC Resistance

(max.)

0.40ohm

0.55ohm

0.80ohm

0.10ohm

0.20ohm

0.30ohm

0.40ohm

0.60ohm

0.80ohm

0.20ohm

0.30ohm

0.40ohm

0.60ohm

0.65ohm

0.90ohm

1.40ohm

0.08ohm

0.10ohm

0.20ohm

0.35ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

35

BLM Series Chip Ferrite Bead

BLM15B Series (0402 Size)

Impedance-Frequency Characteristics (Main Items)

BLM15BD Series

2500

BLM15BB Series

800

2000

BLM15BD182SN1

1500

1000

500

0

1

BLM15BD102SN1

BLM15BD601SN1

BLM15BD471SN1

BLM15BD221SN1

BLM15BD121SN1

BLM15BD750SN1

10 100

Frequency (MHz)

1000 3000

600

400

200

0

1

BLM15BB221SN1

BLM15BB121SN1

BLM15BB750SN1

BLM15BB470SN1

BLM15BB220SN1

BLM15BB100SN1

BLM15BB050SN1

10 100

Frequency (MHz)

BLM15BA Series

1000

800

600

400

200

0

1

BLM15BA330SN1

BLM15BA220SN1

BLM15BA100SN1

BLM15BA050SN1

10 100

Frequency (MHz)

1000 3000

BLM15BA Series

5000

4000

3000

2000

1000

0

1

BLM15BA750SN1

BLM15BA470SN1

10 100

Frequency (MHz)

1000 3000

1000 3000

Impedance-Frequency Characteristics

BLM15BD750SN1

200

150

100

50

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM15BD471SN1

1000

750

500

250

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM15BD121SN1

300

225

150

75

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM15BD601SN1

1200

900

600

300

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM15BD221SN1

600

450

300

150

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM15BD102SN1

1600

1200

800

400

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

36

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM15B Series (0402 Size)

BLM15BD182SN1

2500

2000

1500

1000

500

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM15BB220SN1

120

100

80

60

40

20

0

1 10 100

Frequency (MHz)

Z

X

R

1000 3000

BLM15BB121SN1

600

450

300

150

0

1

Z

10 100

Frequency (MHz)

R

X

1000 3000

BLM15BA100SN1

240

200

160

120

80

40

0

1 10 100

Frequency (MHz)

Z

R

X

1000 3000

BLM15BA470SN1

2000

1600

1200

800

400

0

1 10 100

Frequency (MHz)

R

Z

X

1000 3000

Impedance-Frequency Characteristics

BLM15BB050SN1

30

25

20

15

10

5

0

1

Z

10 100

Frequency (MHz)

X

R

1000 3000

BLM15BB470SN1

300

250

200

150

100

50

0

1

Z

10 100

Frequency (MHz)

X

R

1000 3000

BLM15BB221SN1

800

600

400

200

0

1

Z

X

R

10 100

Frequency (MHz)

1000 3000

BLM15BA220SN1

600

500

400

300

200

100

0

1 10 100

Frequency (MHz)

Z

R

X

1000 3000

BLM15BA750SN1

5000

4000

3000

2000

1000

0

1

X

10 100

Frequency (MHz)

Z

R

1000 3000

BLM15BB100SN1

60

50

40

30

20

10

0

1 10 100

Frequency (MHz)

R

Z

X

1000 3000

BLM15BB750SN1

400

300

200

100

0

1 10 100

Frequency (MHz)

Z

X

R

1000 3000

BLM15BA050SN1

120

100

80

60

40

20

0

1 10 100

Frequency (MHz)

R

Z

X

1000 3000

BLM15BA330SN1

1000

800

600

400

200

0

1 10 100

Frequency (MHz)

Z

R

X

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

37

BLM Series Chip Ferrite Bead

BLM18B

Series (0603 Size)

0603 size for high speed signal lines.

Dimensions

0.4

±

0.2

Equivalent Circuit

1.6

±

0.15

0.8

±

0.15

: Electrode

(in mm)

(Resistance element becomes dominant at high frequencies.)

Packaging

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

4000

10000

1000

Refer to pages from p.82 to p.85 for mounting information.

Rated Value (p: packaging code)

Part Number

BLM18BD470SN1

p

BLM18BD121SN1

p

BLM18BD151SN1

p

BLM18BD221SN1

p

BLM18BD331SN1

p

BLM18BD421SN1

p

BLM18BD471SN1

p

BLM18BD601SN1

p

BLM18BD102SN1

p

BLM18BD152SN1

p

BLM18BD182SN1

p

BLM18BD222SN1

p

BLM18BD252SN1

p

BLM18BB050SN1

p

BLM18BB100SN1

p

BLM18BB220SN1

p

BLM18BB470SN1

p

BLM18BB600SN1

p

BLM18BB750SN1

p

BLM18BB121SN1

p

BLM18BB141SN1

p

BLM18BB151SN1

p

BLM18BB221SN1

p

BLM18BB331SN1

p

BLM18BB471SN1

p

BLM18BA050SN1

p

BLM18BA100SN1

p

BLM18BA220SN1

p

BLM18BA470SN1

p

BLM18BA750SN1

p

BLM18BA121SN1

p

Number of Circuits: 1

Impedance

(at 100MHz/20

°

C)

75ohm

±

25%

120ohm

±

25%

140ohm

±

25%

150ohm

±

25%

220ohm

±

25%

330ohm

±

25%

470ohm

±

25%

5ohm

±

25%

10ohm

±

25%

22ohm

±

25%

47ohm

±

25%

75ohm

±

25%

120ohm

±

25%

47ohm

±

25%

120ohm

±

25%

150ohm

±

25%

220ohm

±

25%

330ohm

±

25%

420ohm

±

25%

470ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

1500ohm

±

25%

1800ohm

±

25%

2200ohm

±

25%

2500ohm

±

25%

5ohm

±

25%

10ohm

±

25%

22ohm

±

25%

47ohm

±

25%

60ohm

±

25%

Rated Current

DC Resistance

(max.)

0.30ohm

0.40ohm

0.40ohm

0.45ohm

0.50ohm

0.55ohm

0.55ohm

0.65ohm

0.85ohm

1.20ohm

1.50ohm

1.50ohm

1.50ohm

0.05ohm

0.10ohm

0.20ohm

0.25ohm

0.25ohm

0.30ohm

0.30ohm

0.35ohm

0.37ohm

0.45ohm

0.58ohm

0.85ohm

0.20ohm

0.25ohm

0.35ohm

0.55ohm

0.70ohm

0.90ohm

500mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

100mA

50mA

50mA

50mA

50mA

700mA

700mA

600mA

550mA

550mA

500mA

500mA

450mA

450mA

450mA

400mA

300mA

500mA

500mA

500mA

300mA

300mA

200mA

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

38

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM18B Series (0603 Size)

Impedance-Frequency Characteristics (Main Items)

BLM18BD Series

2800

2100

1400

700

BLM18BD252SN1

BLM18BD222SN1

BLM18BD182SN1

BLM18BD152SN1

BLM18BD102SN1

BLM18BD601SN1

BLM18BD471SN1

BLM18BD421SN1

BLM18BD331SN1

BLM18BD221SN1

BLM18BD151SN1

BLM18BD121SN1

BLM18BD470SN1

BLM18BB Series

250

200

150

100

50

BLM18BB470SN1

BLM18BB220SN1

BLM18BB100SN1

BLM18BB050SN1

1000 3000

0

1

BLM18BA Series

600

10 100

Frequency (MHz)

0

1

BLM18BB Series

2000

10 100

Frequency (MHz)

1500

1000

500

BLM18BB471SN1

BLM18BB331SN1

BLM18BB221SN1

BLM18BB151SN1

BLM18BB141SN1

BLM18BB121SN1

BLM18BB750SN1

BLM18BB600SN1

0

1

BLM18BA Series

10000

10 100

Frequency (MHz)

1000 3000

450

300

150

0

1

BLM18BA220SN1

BLM18BA100SN1

BLM18BA050SN1

10 100

Frequency (MHz)

1000 3000

1000 3000

7500

5000

2500

0

1

BLM18BA121SN1

BLM18BA750SN1

BLM18BA470SN1

10 100

Frequency (MHz)

1000 3000

Impedance-Frequency Characteristics

BLM18BD470SN1

200

150

100

50

0

1

Z

R

10 100

Frequency (MHz)

X

1000 3000

BLM18BD121SN1

400

300

200

100

0

1

X

Z

R

10 100

Frequency (MHz)

1000 3000

BLM18BD151SN1

400

300

200

100

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

39

BLM Series Chip Ferrite Bead

BLM18B Series (0603 Size)

Impedance-Frequency Characteristics

BLM18BD221SN1

500

400

300

200

100

0

1 10 100

Frequency (MHz)

Z

R

X

1000 3000

BLM18BD471SN1

1200

900

600

300

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18BD152SN1

2500

2000

1500

1000

500

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18BD252SN1

3000

2500

2000

1500

1000

500

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18BB220SN1

100

75

50

25

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18BD331SN1

900

600

300

0

1 10 100

Frequency (MHz)

1000 3000

BLM18BD601SN1

1200

900

600

300

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18BD182SN1

2500

2000

1500

1000

500

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18BB050SN1

30

Z

R

X

20

10

0

1

Z

X

R

10 100

Frequency (MHz)

1000 3000

BLM18BB470SN1

250

200

150

100

50

0

1 10 100

Frequency (MHz)

Z

R

X

1000 3000

BLM18BD421SN1

1000

750

500

250

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18BD102SN1

2000

1600

1200

800

400

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18BD222SN1

2500

2000

1500

1000

500

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18BB100SN1

50

40

30

20

10

0

1 10 100

Frequency (MHz)

Z

R

X

1000 3000

BLM18BB600SN1

300

240

180

120

60

0

1 10 100

Frequency (MHz)

Z

R

X

1000 3000

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

40

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM18B Series (0603 Size)

Impedance-Frequency Characteristics

BLM18BB750SN1

400

300

200

100

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18BB151SN1

600

450

300

150

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18BB471SN1

2000

1600

1200

800

400

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18BA220SN1

600

450

300

150

0

1

Z

10 100

Frequency (MHz)

R

X

1000 3000

BLM18BA121SN1

10000

7500

5000

2500

0

1 10 100

Frequency (MHz)

Z

R

X

1000 3000

BLM18BB121SN1

500

400

300

200

100

0

1 10 100

Frequency (MHz)

Z

R

X

1000 3000

BLM18BB221SN1

1000

800

600

400

200

0

1 10 100

Frequency (MHz)

Z

R

X

1000 3000

BLM18BA050SN1

100

75

50

25

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18BA470SN1

1600

1200

800

400

0

1 10 100

Frequency (MHz)

Z

X

R

1000 3000

BLM18BB141SN1

600

450

300

150

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18BB331SN1

1500

1200

900

600

300

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18BA100SN1

200

150

100

50

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18BA750SN1

6000

4500

3000

1500

0

1 10 100

Frequency (MHz)

Z

R

X

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

41

BLM Series Chip Ferrite Bead

BLM21B

Series (0805 Size)

0805 size for high speed signal lines.

Dimensions

0.5

±

0.2 *2

Equivalent Circuit

BLM21BD121SN1

p

BLM21BD151SN1

p

BLM21BD221SN1

p

BLM21BD331SN1

p

BLM21BD421SN1

p

BLM21BD471SN1

p

BLM21BD601SN1

p

BLM21BD751SN1

p

BLM21BD102SN1

p

BLM21BD152SN1

p

BLM21BD182SN1

p

BLM21BD222TN1

p

BLM21BD222SN1

p

BLM21BD272SN1

p

BLM21BB050SN1

p

BLM21BB600SN1

p

BLM21BB750SN1

p

BLM21BB121SN1

p

BLM21BB151SN1

p

BLM21BB201SN1

p

BLM21BB221SN1

p

BLM21BB331SN1

p

BLM21BB471SN1

p

Number of Circuits: 1

Rated Value (p: packaging code)

Part Number

Impedance

(at 100MHz/20

°

C)

120ohm

±

25%

150ohm

±

25%

220ohm

±

25%

330ohm

±

25%

420ohm

±

25%

470ohm

±

25%

600ohm

±

25%

750ohm

±

25%

1000ohm

±

25%

1500ohm

±

25%

1800ohm

±

25%

2200ohm

±

25%

2250ohm(Typ.)

2700ohm

±

25%

5ohm

±

25%

60ohm

±

25%

75ohm

±

25%

120ohm

±

25%

150ohm

±

25%

200ohm

±

25%

220ohm

±

25%

330ohm

±

25%

470ohm

±

25%

2.0

±

0.2

Rated Current

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

500mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

1.25

±

0.2

*1 BLM21BD222SN1 / 21BD272SN1

:1.25

±

0.2

*2 BLM21BD272SN1: 0.3

±

0.2

EIA CODE : 0805

: Electrode

(in mm)

(Resistance element becomes dominant at high frequencies.)

Packaging

• All except BLM21BD222SN1/21BD272SN1

Code

D

J

B

Packaging

180mm Reel Paper Tape

330mm Reel Paper Tape

Bulk(Bag)

Minimum

Quantity

4000

10000

1000

• BLM21BD222SN1/21BD272SN1 only

Code Packaging

Minimum

Quantity

L

180mm Reel Plastic Tape 3000

K

330mm Reel Plastic Tape 10000

B

Bulk(Bag) 1000

Refer to pages from p.82 to p.85 for mounting information.

DC Resistance

(max.)

0.25ohm

0.25ohm

0.25ohm

0.30ohm

0.30ohm

0.35ohm

0.35ohm

0.40ohm

0.40ohm

0.45ohm

0.50ohm

0.60ohm

0.60ohm

0.80ohm

0.07ohm

0.20ohm

0.25ohm

0.25ohm

0.25ohm

0.35ohm

0.35ohm

0.40ohm

0.45ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

42

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM21B Series (0805 Size)

Impedance-Frequency Characteristics (Main Items)

BLM21BD Series

3200

BLM21BB Series

2000

BLM21BD272SN1

2400

BLM21BD222SN1

BLM21BD222TN1

BLM21BD182SN1

1600

1600

800

BLM21BD152SN1

BLM21BD102SN1

BLM21BD751SN1

BLM21BD601SN1

BLM21BD471SN1

BLM21BD421SN1

BLM21BD331SN1

BLM21BD221SN1

BLM21BD151SN1

BLM21BD121SN1

1200

800

400

BLM21BB471SN1

BLM21BB331SN1

BLM21BB221SN1

BLM21BB151SN1

BLM21BB121SN1

BLM21BB600SN1

BLM21BB050SN1

0

1 10 100

Frequency (MHz)

1000 3000

0

1 10 100

Frequency (MHz)

Impedance-Frequency Characteristics

BLM21BB201SN1

BLM21BB750SN1

1000 3000

600

400

200

BLM21BD121SN1

300

240

180

120

60

0

1

Z

R

10 100

Frequency (MHz)

X

BLM21BD331SN1

800

1000 3000

Z

R

X

0

1 10 100

Frequency (MHz)

BLM21BD601SN1

1200

900

600

Z

R

X

300

1000 3000

0

1 10 100

Frequency (MHz)

BLM21BD152SN1

2500

2000

1500

1000

500

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

1000 3000

BLM21BD151SN1

300

240

180

120

60

0

1

Z

R

10 100

Frequency (MHz)

X

BLM21BD421SN1

1000

1200

900

600

300

0

1

800

600

400

200

0

1

Z

R

10 100

Frequency (MHz)

BLM21BD751SN1

1500

X

Z

R

X

10 100

Frequency (MHz)

BLM21BD182SN1

2500

2000

1500

1000

500

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

1000 3000

1000 3000

1000 3000

900

600

300

BLM21BD221SN1

500

400

300

200

100

0

1

Z

R

10 100

Frequency (MHz)

X

BLM21BD471SN1

1200

1000 3000

Z

R

X

0

1 10 100

Frequency (MHz)

BLM21BD102SN1

1800

1500

1200

900

600

300

0

1

Z

R

X

10 100

Frequency (MHz)

BLM21BD222TN1

2400

1800

Z

R

1200

X

600

1000 3000

1000 3000

0

1 10 100

Frequency (MHz)

1000 3000

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

43

BLM Series Chip Ferrite Bead

BLM21B Series (0805 Size)

Impedance-Frequency Characteristics

BLM21BD222SN1

3000

2400

1800

1200

600

0

1

Z

R

X

10 100

Frequency (MHz)

BLM21BB600SN1

400

1000 3000

300

200

100

Z

R

X

0

1 10 100

Frequency (MHz)

BLM21BB151SN1

800

1000 3000

600

400

Z

R

X

200

0

1 10 100

Frequency (MHz)

BLM21BB331SN1

1200

900

600

Z

R

X

300

1000 3000

0

1 10 100

Frequency (MHz)

1000 3000

BLM21BD272SN1

3500

3000

2500

2000

1500

1000

500

0

1

Z

R

X

10 100

Frequency (MHz)

BLM21BB750SN1

500

1000 3000

400

300

200

100

0

1 10 100

Frequency (MHz)

BLM21BB201SN1

800

600

Z

R

Z

R

X

1000 3000

400

X

200

0

1 10 100

Frequency (MHz)

BLM21BB471SN1

2000

1500

Z

R

1000

X

500

1000 3000

0

1 10 100

Frequency (MHz)

1000 3000

400

300

200

100

0

1

BLM21BB050SN1

30

15

10

25

20

5

0

1 10 100

Frequency (MHz)

BLM21BB121SN1

500

Z

R

X

10 100

Frequency (MHz)

Z

X

R

1000 3000

1000 3000

BLM21BB221SN1

1000

800

600

400

200

0

1

Z

R

10 100

Frequency (MHz)

X

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

44

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM18R

Series (0603 Size)

For digital I/F. Reduce the distortion of waveform created by resonance.

Dimensions

0.4

±

0.2

Equivalent Circuit

1.6

±

0.15

Rated Value (p: packaging code)

Part Number

BLM18RK121SN1

p

BLM18RK221SN1

p

BLM18RK471SN1

p

BLM18RK601SN1

p

BLM18RK102SN1

p

Number of Circuits: 1

Impedance

(at 100MHz/20

°

C)

120ohm

±

25%

220ohm

±

25%

470ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

Rated Current

200mA

200mA

200mA

200mA

200mA

Impedance-Frequency Characteristics (Main Items)

1200

0.8

±

0.15

: Electrode

(in mm)

(Resistance element becomes dominant at high frequencies.)

Packaging

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

4000

10000

1000

Refer to pages from p.82 to p.85 for mounting information.

DC Resistance

(max.)

0.25ohm

0.30ohm

0.50ohm

0.60ohm

0.80ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

900

BLM18RK601SN1

BLM18RK471SN1

BLM18RK221SN1

BLM18RK121SN1

BLM18RK102SN1

600

300

0

1 10 100

Frequency (MHz)

1000 3000

Impedance-Frequency Characteristics

BLM18RK121SN1

200

150

100

50

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18RK221SN1

400

300

200

100

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18RK471SN1

600

450

300

150

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

45

BLM Series Chip Ferrite Bead

BLM18R Series (0603 Size)

Impedance-Frequency Characteristics

BLM18RK601SN1

1000

750

500

250

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18RK102SN1

1200

900

600

300

0

1

X

Z

R

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

46

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM21R

Series (0805 Size)

For digital I/F. Reduce the distortion of waveform created by resonance.

Dimensions

0.5

±

0.2

Equivalent Circuit

2.0

±

0.2

Rated Value (p: packaging code)

Part Number

BLM21RK121SN1

p

BLM21RK221SN1

p

BLM21RK471SN1

p

BLM21RK601SN1

p

BLM21RK102SN1

p

Number of Circuits: 1

Impedance

(at 100MHz/20

°

C)

120ohm

±

25%

220ohm

±

25%

470ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

Impedance-Frequency Characteristics (Main Items)

1200

Rated Current

200mA

200mA

200mA

200mA

200mA

900

BLM21RK601SN1

BLM21RK471SN1

BLM21RK221SN1

BLM21RK121SN1

BLM21RK102SN1

600

1.25

±

0.2

EIA CODE : 0805

: Electrode

(in mm)

(Resistance element becomes dominant at high frequencies.)

Packaging

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

4000

10000

1000

Refer to pages from p.82 to p.85 for mounting information.

DC Resistance

(max.)

0.15ohm

0.20ohm

0.25ohm

0.30ohm

0.50ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

300

0

1 10 100

Frequency (MHz)

1000 3000

Impedance-Frequency Characteristics

BLM21RK121SN1

200

150

100

50

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM21RK221SN1

300

225

150

75

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM21RK471SN1

600

450

300

150

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

47

BLM Series Chip Ferrite Bead

BLM21R Series (0805 Size)

Impedance-Frequency Characteristics

BLM21RK601SN1

1000

750

500

250

Z

R

X

0

1 10 100

Frequency (MHz)

1000 3000

BLM21RK102SN1

1200

900

600

300

Z

R

X

0

1 10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

48

C31E.pdf

09.4.20

EMI

Suppression

Effect

BLM

pp

R Series

Waveform Distortion Suppressing

Performance of BLM

pp

R Series

Measuring Circuits

1MHz

AC04

Filter

Pattern 20cm

Measuring Point

AC00

Type of Filter

Initial

(No filter)

EMI Suppression Effect / Description

Signal waveform (100nsec/div, 2V/div) Expand (10nsec/div, 2V/div) Spectrum

85

80

75

70

65

60

55

50

45

30 50 100 150 200

Frequency (MHz)

250 300

Ringing is caused on the signal waveform.

Such ringing contains several hundred MHz harmonic components and generates noise.

Resister (47

) is used

Signal waveform (100nsec/div, 2V/div) Expand (10nsec/div, 2V/div) Spectrum

85

80

75

70

65

60

55

50

45

30 50 100 150 200

Frequency (MHz)

250 300

Comparing initial waveform, ringing is suppressed a little.

However there still remains high level waveform distortion.

BLM18RK221SN1

(220

at 100MHz) is used

Signal waveform (100nsec/div, 2V/div) Expand (10nsec/div, 2V/div) Spectrum

85

80

75

70

65

60

55

50

45

30 50 100 150 200

Frequency (MHz)

250 300

BLM18R has excellent performance for noise suppression and waveform distortion suppression.

BLM18R suppresses drastically not only spectrum level in more than 100MHz range but waveform distortion.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

49

BLM Series Chip Ferrite Bead

BLM03P

Series (0201 Size)

0201 size for power lines.

Dimensions

0.6

±

0.03

Equivalent Circuit

0.3

±

0.03

0.15

±

0.05

Rated Value (p: packaging code)

Part Number

BLM03PG220SN1

p

BLM03PG330SN1

p

Number of Circuits: 1

Impedance

(at 100MHz/20

°

C)

22ohm

±

25%

33ohm

±

25%

Rated Current

900mA

750mA

Impedance-Frequency Characteristics (Main Items)

80

: Electrode

(in mm)

(Resistance element becomes dominant at high frequencies.)

Packaging

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

15000

50000

1000

Refer to pages from p.82 to p.85 for mounting information.

DC Resistance

(max.)

0.065ohm

0.090ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

60

40

BLM03PG330SN1

BLM03PG220SN1

20

0

1 10 100

Frequency (MHz)

1000 3000

Impedance-Frequency Characteristics

BLM03PG220SN1

80

60

40

20

0

1

Z

R

10 100

Frequency (MHz)

X

1000 3000

BLM03PG330SN1

80

60

40

20

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

50

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM15P

Series (0402 Size)

0402 size for power lines.

Dimensions

0.25

±

0.1

Equivalent Circuit

1.0

±

0.05

0.5

±

0.05

(Resistance element becomes dominant at high frequencies.)

Packaging

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

10000

50000

1000

: Electrode

(in mm)

Refer to pages from p.82 to p.85 for mounting information.

Rated Value (p: packaging code)

Part Number

BLM15PG100SN1

p

BLM15PD300SN1

p

BLM15PD600SN1

p

BLM15PD800SN1

p

BLM15PD121SN1

p

Number of Circuits: 1

Impedance

(at 100MHz/20

°

C)

10ohm(Typ.)

30ohm

±

25%

60ohm

±

25%

80ohm

±

25%

120ohm

±

25%

Rated Current

1000mA

2200mA

1700mA

1500mA

1300mA

Impedance-Frequency Characteristics (Main Items)

250

200

150

BLM15PD121SN1

BLM15PD800SN1

BLM15PD600SN1

BLM15PD300SN1

DC Resistance

(max.)

0.05ohm

0.035ohm

0.06ohm

0.07ohm

0.09ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

Notice (Rating)

In operating temperature exceeding +85

°

C, derating of current is necessary for

BLM15PD series.

Please apply the derating curve shown in chart according to the operating temperature.

100

BLM15PG100SN1

Derating

3.0

50

0

1 10 100

Frequency (MHz)

1000 3000

2.5

2.0

2.2

1.7

1.5

1.3

1.0

1.4

1.1

0.9

0.5

85 125

Operating Temperature [

°

C]

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

51

BLM Series Chip Ferrite Bead

BLM15P Series (0402 Size)

Impedance-Frequency Characteristics

BLM15PG100SN1

20

15

10

5

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM15PD800SN1

160

120

80

40

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM15PD300SN1

60

45

30

15

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM15PD121SN1

240

180

120

60

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM15PD600SN1

120

90

60

30

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

52

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM18P

Series (0603 Size)

0603 size for power lines.

Dimensions

0.4

±

0.2

Equivalent Circuit

1.6

±

0.15

0.8

±

0.15

: Electrode

(in mm)

(Resistance element becomes dominant at high frequencies.)

Packaging

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

4000

10000

1000

Refer to pages from p.82 to p.85 for mounting information.

Rated Value (p: packaging code)

Part Number

BLM18PG300SN1

p

BLM18PG330SN1

p

BLM18PG600SN1

p

BLM18PG121SN1

p

BLM18PG181SN1

p

BLM18PG221SN1

p

BLM18PG331SN1

p

BLM18PG471SN1

p

Number of Circuits: 1

Impedance

(at 100MHz/20

°

C)

30ohm(Typ.)

33ohm

±

25%

60ohm(Typ.)

120ohm

±

25%

180ohm

±

25%

220ohm

±

25%

330ohm

±

25%

470ohm

±

25%

Rated Current

Impedance-Frequency Characteristics (Main Items)

600

450

BLM18PG471SN1

BLM18PG331SN1

BLM18PG221SN1

BLM18PG181SN1

BLM18PG121SN1

BLM18PG600SN1

300

BLM18PG330SN1

BLM18PG300SN1

150

1000mA

3000mA

500mA

2000mA

1500mA

1400mA

1200mA

1000mA

DC Resistance

(max.)

0.05ohm

0.025ohm

0.10ohm

0.05ohm

0.09ohm

0.10ohm

0.15ohm

0.20ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

Notice (Rating)

In operating temperature exceeding +85

°

C, derating of current is necessary for

BLM18PG series.

Please apply the derating curve shown in chart according to the operating temperature.

Derating

3

0

1 10 100

Frequency (MHz)

1000 3000

2

1.5

1.4

1.2

1

0

85

Operating Temperature [

°

C]

125

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

53

BLM Series Chip Ferrite Bead

BLM18P Series (0603 Size)

Impedance-Frequency Characteristics

BLM18PG300SN1

50

40

30

20

10

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18PG121SN1

200

150

100

50

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18PG331SN1

600

450

300

150

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18PG330SN1

60

45

30

15

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18PG181SN1

280

210

140

70

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18PG471SN1

800

600

400

200

0

1

R

Z

X

10 100

Frequency (MHz)

1000 3000

BLM18PG600SN1

100

80

60

40

20

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18PG221SN1

400

300

200

100

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

54

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM21P

Series (0805 Size)

0805 size for power lines.

Dimensions

0.5

±

0.2

Equivalent Circuit

2.0

±

0.2

1.25

±

0.2

EIA CODE : 0805

: Electrode

(in mm)

(Resistance element becomes dominant at high frequencies.)

Packaging

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

4000

10000

1000

Refer to pages from p.82 to p.85 for mounting information.

Rated Value (p: packaging code)

Part Number

BLM21PG220SN1

p

BLM21PG300SN1

p

BLM21PG600SN1

p

BLM21PG221SN1

p

BLM21PG331SN1

p

Number of Circuits: 1

Impedance

(at 100MHz/20

°

C)

22ohm

±

25%

30ohm(Typ.)

60ohm

±

25%

220ohm

±

25%

330ohm

±

25%

Rated Current

6000mA

3000mA

3000mA

2000mA

1500mA

Impedance-Frequency Characteristics (Main Items)

600

450

300

BLM21PG331SN1

BLM21PG221SN1

BLM21PG600SN1

BLM21PG300SN1

BLM21PG220SN1

DC Resistance

(max.)

Derating

0.01ohm

0.015ohm

0.025ohm

0.050ohm

0.09ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

Notice (Rating)

In operating temperature exceeding +85

°

C, derating of current is necessary for

BLM21PG series.

Please apply the derating curve shown in chart according to the operating temperature.

150

0

1 10 100

Frequency (MHz)

1000 3000

2

1.5

1

0

4

3

6

5

85

Operating Temperature [

°

C]

125

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

55

BLM Series Chip Ferrite Bead

BLM21P Series (0805 Size)

Impedance-Frequency Characteristics

BLM21PG220SN1

40

30

20

10

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM21PG221SN1

400

300

200

100

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM21PG300SN1

60

45

30

15

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM21PG331SN1

600

450

300

150

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM21PG600SN1

120

90

60

30

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

56

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM31P

Series (1206 Size)

1206 size for power lines.

Dimensions

0.7

±

0.3

Equivalent Circuit

3.2

±

0.2

1.6

±

0.2

: Electrode

(in mm)

(Resistance element becomes dominant at high frequencies.)

Packaging

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 3000

K

330mm Reel Embossed Tape 10000

B

Bulk(Bag) 1000

Refer to pages from p.82 to p.85 for mounting information.

Rated Value (p: packaging code)

Part Number

BLM31PG330SN1

p

BLM31PG500SN1

p

BLM31PG121SN1

p

BLM31PG391SN1

p

BLM31PG601SN1

p

Number of Circuits: 1

Impedance

(at 100MHz/20

°

C)

33ohm

±

25%

50ohm(Typ.)

120ohm

±

25%

390ohm

±

25%

600ohm

±

25%

Rated Current

6000mA

3000mA

3000mA

2000mA

1500mA

Impedance-Frequency Characteristics (Main Items)

800

600

400

BLM31PG601SN1

BLM31PG391SN1

BLM31PG121SN1

DC Resistance

(max.)

0.01ohm

0.025ohm

0.025ohm

0.05ohm

0.09ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

Notice (Rating)

In operating temperature exceeding +85

°

C, derating of current is necessary for

BLM31PG series.

Please apply the derating curve shown in chart according to the operating temperature.

Derating

200

BLM31PG500SN1

BLM31PG330SN1

6

0

1 10 100

Frequency (MHz)

1000 3000

5

4

3

2

1.5

1

0

85

Operating Temperature [

°

C]

125

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

57

BLM Series Chip Ferrite Bead

BLM31P Series (1206 Size)

Impedance-Frequency Characteristics

BLM31PG330SN1

60

45

30

15

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM31PG391SN1

600

450

300

150

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM31PG500SN1

80

60

40

20

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM31PG601SN1

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM31PG121SN1

200

150

100

50

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

58

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM41P

Series (1806 Size)

1806 size for power lines.

Dimensions

0.7

±

0.3

Equivalent Circuit

4.5

±

0.2

1.6

±

0.2

(Resistance element becomes dominant at high frequencies.)

Packaging

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 2500

K

330mm Reel Embossed Tape 8000

B

Bulk(Bag) 1000

: Electrode

(in mm)

Refer to pages from p.82 to p.85 for mounting information.

Rated Value (p: packaging code)

Part Number

BLM41PG600SN1

p

BLM41PG750SN1

p

BLM41PG181SN1

p

BLM41PG471SN1

p

BLM41PG102SN1

p

Number of Circuits: 1

Impedance

(at 100MHz/20

°

C)

60ohm(Typ.)

75ohm(Typ.)

180ohm

±

25%

470ohm

±

25%

1000ohm

±

25%

Rated Current

6000mA

3000mA

3000mA

2000mA

1500mA

Impedance-Frequency Characteristics (Main Items)

BLM41PG Series

250

200

150

BLM41PG181SN1

DC Resistance

(max.)

0.01ohm

0.025ohm

0.025ohm

0.05ohm

0.09ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

Notice (Rating)

In operating temperature exceeding +85

°

C, derating of current is necessary for

BLM41PG series.

Please apply the derating curve shown in chart according to the operating temperature.

Derating

100

BLM41PG750SN1

50

6

BLM41PG600SN1

0

1 10 100

Frequency (MHz)

1000 3000

5

BLM41PG Series

1200

4

3

900

BLM41PG102SN1

600

2

1.5

1

BLM41PG471SN1

300

0

85

Operating Temperature [

°

C]

125

0

1 10 100

Frequency (MHz)

1000 3000

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

59

BLM Series Chip Ferrite Bead

BLM41P Series (1806 Size)

Impedance-Frequency Characteristics

BLM41PG600SN1

100

75

50

25

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM41PG471SN1

600

450

300

150

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM41PG750SN1

100

75

50

25

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM41PG102SN1

1200

900

600

300

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM41PG181SN1

400

300

200

100

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

60

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM18K

Series (0603 Size)

6A Max, high performance type for power lines up to 600ohm.

Equivalent CircuitDimensions

1.6

±

0.15

0.8

±

0.15

0.4

±

0.2

Part Number

BLM18KG_TN

BLM18KG_SN

T

0.6

±

0.15

0.8

±

0.15

: Electrode

(in mm)

(Resistance element becomes dominant at high frequencies.)

Packaging

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

4000

10000

1000

Refer to pages from p.82 to p.85 for mounting information.

Rated Value (p: packaging code)

Part Number

BLM18KG260TN1

p

BLM18KG700TN1

p

BLM18KG121TN1

p

BLM18KG221SN1

p

BLM18KG331SN1

p

BLM18KG471SN1

p

BLM18KG601SN1

p

Number of Circuits: 1

Impedance

(at 100MHz/20

°

C)

26ohm

±

25%

70ohm

±

25%

120ohm

±

25%

220ohm

±

25%

330ohm

±

25%

470ohm

±

25%

600ohm

±

25%

Rated Current

6000mA

3500mA

3000mA

2200mA

1700mA

1500mA

1300mA

Impedance-Frequency Characteristics (Main Items)

800

600

400

BLM18KG601SN1

BLM18KG471SN1

BLM18KG331SN1

BLM18KG221SN1

BLM18KG121TN1

BLM18KG700TN1

BLM18KG260TN1

DC Resistance

(max.)

0.007ohm

0.022ohm

0.030ohm

0.050ohm

0.080ohm

0.130ohm

0.150ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

Notice (Rating)

In operating temperature exceeding +85

°

C, derating of current is necessary for

BLM18KG series.

Please apply the derating curve shown in chart according to the operating temperature.

200

Derating

7.0

0

1 10 100

Frequency (MHz)

1000 3000

6.0

5.0

4.0

3.5

3.0

2.2

2.0

1.7

1.5

1.3

1.0

0.0

85

Operating Temperature [

°

C]

125

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

61

BLM Series Chip Ferrite Bead

BLM18K Series (0603 Size)

Impedance-Frequency Characteristics

BLM18KG260TN1

40

30

20

10

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18KG221SN1

400

300

200

100

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18KG601SN1

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18KG700TN1

100

75

50

25

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18KG331SN1

600

450

300

150

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18KG121TN1

200

150

100

50

0

1

X

Z

R

10 100

Frequency (MHz)

1000 3000

BLM18KG471SN1

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

62

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM18S

Series (0603 Size)

6A Max, high performance type for power lines.

Dimensions

1.6

±

0.15

0.8

±

0.15

Equivalent Circuit

0.4

±

0.2

(Resistance element becomes dominant at high frequencies.)

Packaging

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

10000

30000

1000

: Electrode

(in mm)

Refer to pages from p.82 to p.85 for mounting information.

Rated Value (p: packaging code)

Part Number

BLM18SG260TN1

p

BLM18SG700TN1

p

BLM18SG121TN1

p

BLM18SG221TN1

p

BLM18SG331TN1

p

Number of Circuits: 1

Impedance

(at 100MHz/20

°

C)

26ohm

±

25%

70ohm

±

25%

120ohm

±

25%

220ohm

±

25%

330ohm

±

25%

Rated Current

Impedance-Frequency Characteristics (Main Items)

400

BLM18SG331TN1

BLM18SG221TN1

300

BLM18SG121TN1

6000mA

4000mA

3000mA

2500mA

1500mA

200

BLM18SG700TN1

DC Resistance

(max.)

0.007ohm

0.020ohm

0.025ohm

0.040ohm

0.070ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

Notice (Rating)

In operating temperature exceeding +85

°

C, derating of current is necessary for

BLM18SG series.

Please apply the derating curve shown in chart according to the operating temperature.

BLM18SG260TN1

Derating

100

6

0

1 10 100

Frequency (MHz)

1000 3000

5

4

3

2.5

2

1.5

1

0

85

Operating Temperature [

°

C]

125

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

63

BLM Series Chip Ferrite Bead

BLM18S Series (0603 Size)

Impedance-Frequency Characteristics

BLM18SG260TN1

40

30

20

10

0

1

R

Z

X

10 100

Frequency (MHz)

1000 3000

BLM18SG221TN1

300

250

200

150

100

50

0

1

X

Z

R

10 100

Frequency (MHz)

1000 3000

BLM18SG700TN1

100

75

50

25

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18SG331TN1

400

300

200

100

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18SG121TN1

200

150

100

50

0

1

R

Z

X

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

64

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM15H

Series (0402 Size)

0402 size for GHz band noise.

Dimensions

0.25

±

0.1

Equivalent Circuit

1.0

±

0.05

0.5

±

0.05

: Electrode

(in mm)

(Resistance element becomes dominant at high frequencies.)

Packaging

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

10000

50000

1000

Refer to pages from p.82 to p.85 for mounting information.

Rated Value (p: packaging code)

Part Number

BLM15HG601SN1

p

BLM15HG102SN1

p

BLM15HD601SN1

p

BLM15HD102SN1

p

BLM15HD182SN1

p

BLM15HB121SN1

p

BLM15HB221SN1

p

Number of Circuits: 1

Impedance

(at 100MHz/20

°

C)

600ohm

±

25%

1000ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

1800ohm

±

25%

120ohm

±

25%

220ohm

±

25%

Impedance

(at 1GHz/20

°

C)

1000ohm

±

40%

1400ohm

±

40%

1400ohm

±

40%

2000ohm

±

40%

2700ohm

±

40%

500ohm

±

40%

900ohm

±

40%

Rated Current

300mA

250mA

300mA

250mA

200mA

300mA

250mA

Impedance-Frequency Characteristics (Main Items)

BLM15HG Series

1800

BLM15HD Series

4000

DC Resistance

(max.)

0.7ohm

1.1ohm

0.85ohm

1.25ohm

2.2ohm

0.7ohm

1.0ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

1500

1200

900

600

BLM15HG102SN1

BLM15HG601SN1

3000

2000

BLM15HD182SN1

BLM15HD102SN1

BLM15HD601SN1

1000

300

0

1

BLM15HB Series

1200

10 100

Frequency (MHz)

1000

800

600

400

200

BLM15HB221SN1

BLM15HB121SN1

1000 3000

0

1 10 100

Frequency (MHz)

1000 3000

0

1 10 100

Frequency (MHz)

1000 3000

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

65

BLM Series Chip Ferrite Bead

BLM15H Series (0402 Size)

Impedance-Frequency Characteristics

BLM15HG601SN1

1200

900

600

300

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM15HD102SN1

2500

2000

1500

1000

500

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM15HB221SN1

1200

1000

800

600

400

200

0

1 10 100

Frequency (MHz)

Z

R

X

1000 3000

BLM15HG102SN1

1800

1500

1200

900

600

300

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM15HD182SN1

4000

3000

2000

1000

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM15HD601SN1

2000

1600

1200

800

400

0

1 10 100

Frequency (MHz)

Z

R

X

1000 3000

BLM15HB121SN1

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

66

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM18H

Series (0603 Size)

0603 size for GHz band noise.

Dimensions

0.4

±

0.2

Equivalent Circuit

1.6

±

0.15

0.8

±

0.15

: Electrode

(in mm)

(Resistance element becomes dominant at high frequencies.)

Packaging

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

4000

10000

1000

Refer to pages from p.82 to p.85 for mounting information.

Rated Value (p: packaging code)

Part Number

BLM18HG471SN1

p

BLM18HG601SN1

p

BLM18HG102SN1

p

BLM18HE601SN1

p

BLM18HE102SN1

p

BLM18HE152SN1

p

BLM18HD471SN1

p

BLM18HD601SN1

p

BLM18HD102SN1

p

BLM18HB121SN1

p

BLM18HB221SN1

p

BLM18HB331SN1

p

BLM18HK331SN1

p

BLM18HK471SN1

p

BLM18HK601SN1

p

BLM18HK102SN1

p

Number of Circuits: 1

Impedance

(at 100MHz/20

°

C)

470ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

1500ohm

±

25%

470ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

120ohm

±

25%

220ohm

±

25%

330ohm

±

25%

330ohm

±

25%

470ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

Impedance

(at 1GHz/20

°

C)

600ohm(Typ.)

700ohm(Typ.)

1000ohm(Typ.)

600ohm(Typ.)

1000ohm(Typ.)

1500ohm(Typ.)

1000ohm(Typ.)

1200ohm(Typ.)

1700ohm(Typ.)

500ohm

±

40%

1100ohm

±

40%

1600ohm

±

40%

400ohm

±

40%

600ohm

±

40%

700ohm

±

40%

1200ohm

±

40%

Rated Current

200mA

200mA

100mA

800mA

600mA

500mA

100mA

100mA

50mA

200mA

100mA

50mA

200mA

200mA

100mA

50mA

Impedance-Frequency Characteristics (Main Items)

BLM18HG Series BLM18HE Series

2500

2000

BLM18HE152SN1

DC Resistance

(max.)

0.85ohm

1.00ohm

1.60ohm

0.25ohm

0.35ohm

0.50ohm

1.20ohm

1.50ohm

1.80ohm

0.50ohm

0.80ohm

1.20ohm

0.50ohm

0.70ohm

0.90ohm

1.50ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

2000

1500

1000

BLM18HG102SN1

BLM18HG601SN1

BLM18HG471SN1

1500

BLM18HE102SN1

BLM18HE601SN1

1000

500

500

0

1 10 100

Frequency (MHz)

1000 3000

0

1 10 100

Frequency (MHz)

1000 3000

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

67

BLM Series Chip Ferrite Bead

BLM18H Series (0603 Size)

Impedance-Frequency Characteristics (Main Items)

BLM18HD Series BLM18HB Series

1600

4000

3000

2000

BLM18HD102SN1

BLM18HD601SN1

BLM18HD471SN1

1200

800

BLM18HB331SN1

BLM18HB221SN1

BLM18HB121SN1

1000

400

0

1 10 100

Frequency (MHz)

BLM18HK Series

1600

BLM18HK102SN1

1200

BLM18HK601SN1

800

BLM18HK471SN1

BLM18HK331SN1

400

0

1 10 100

Frequency (MHz)

1000 3000

1000 3000

0

1 10 100

Frequency (MHz)

Notice (Rating)

In operating temperature exceeding +85

°

C, derating of current is necessary for

BLM18HE series.

Please apply the derating curve shown in chart according to the operating temperature.

Derating

BLM18HE601SN1

800

1000

600

500

400

BLM18HE102SN1

BLM18HE152SN1

3000

Impedance-Frequency Characteristics

85 125

Operating Temperature [

°

C]

BLM18HG471SN1

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18HE601SN1

1000

800

600

400

200

0

1 10 100

Frequency (MHz)

Z

R

X

1000 3000

BLM18HG601SN1

1000

750

500

250

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18HE102SN1

2000

1500

1000

500

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18HG102SN1

2000

1500

1000

500

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18HE152SN1

2500

2000

1500

1000

500

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

68

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM18H Series (0603 Size)

Impedance-Frequency Characteristics

BLM18HD471SN1

2000

1500

1000

500

0

1 10 100

Frequency (MHz)

Z

R

X

1000 3000

BLM18HB121SN1

800

600

400

200

0

1 10 100

Frequency (MHz)

Z

R

X

1000 3000

BLM18HK331SN1

600

450

300

150

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18HK102SN1

1600

1200

800

400

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18HD601SN1

2000

1500

1000

500

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18HB221SN1

1000

750

500

250

0

1

Z

R

10 100

Frequency (MHz)

X

1000 3000

BLM18HK471SN1

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18HD102SN1

4000

3000

2000

1000

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18HB331SN1

1600

1200

800

400

0

1

Z

R

10 100

Frequency (MHz)

X

1000 3000

BLM18HK601SN1

1000

750

500

250

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

69

EMI

Suppression

Effect

BLM

pp

H Series

Noise Suppression in UHF Range

Testing Circuit

74HCU04 74AC04

Measured radiation at 3m distance

74HC00

Type of Filter

Initial

(No filter)

Conventional Type

BLM18AG102SN1

(1000

at 100MHz)

BLM

10MHz

EMI Suppression Effect / Description

70

60

50

40

30

20

10

300 400 500 600 700

Frequency (MHz)

800 900 1000

70

60

50

40

30

20

10

300 400

Initial

500 600 700

Frequency (MHz)

800 900 1000

Current BLM are effective in suppressing noise in the range between

300MHz and 700MHz.

for GHz Noise Suppression

BLM18HG102SN1

(1000

at 100MHz)

70

60

50

40

30

20

10

300 400 500 600 700

Frequency (MHz)

800 900 1000

In addition to the effectiveness of current BLM, BLM18HG suppresses noise in the range beyond 700MHz.

Initial

BLM18AG102SN1

Comparison between BLM18HG102SN1 and BLM18AG102SN1 (Current Item)

2000

1500

1000

500

BLM18HG102SN1

BLM18AG102SN1

0

1 10 100

Frequency (MHz)

1000 2000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

70

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM15E

Series (0402 Size)

For GHz band noise, also capable to large current.

Dimensions

0.25

±

0.1

Equivalent Circuit

1.0

±

0.05

0.5

±

0.05

(Resistance element becomes dominant at high frequencies.)

Packaging

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

10000

50000

1000

: Electrode

(in mm)

Refer to pages from p.82 to p.85 for mounting information.

Rated Value (p: packaging code)

Part Number

BLM15EG121SN1

p

BLM15EG221SN1

p

Number of Circuits: 1

Impedance

(at 100MHz/20

°

C)

120ohm

±

25%

220ohm

±

25%

Impedance

(at 1GHz/20

°

C)

145ohm(Typ.)

270ohm(Typ.)

Impedance-Frequency Characteristics (Main Items)

400

300

Rated Current

1500mA

700mA

DC Resistance

(max.)

0.095ohm

0.28ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

Notice (Rating)

In operating temperature exceeding +85

°

C, derating of current is necessary for BLM15E series.

Please apply the derating curve shown in chart according to the operating temperature.

BLM15EG221SN1

200

100

0

1

BLM15EG121SN1

10 100

Frequency (MHz)

1000 3000

Derating

2.1

1.8

1.5

1.2

0.9

0.6

45

BLM15EG121SN1

85 125

Operating Temperature (

°

C)

0.9

0.7

0.5

0.3

45

BLM15EG221SN1

85 125

Operating Temperature (

°

C)

Impedance-Frequency Characteristics

BLM15EG121SN1

200

150

100

50

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM15EG221SN1

400

300

200

100

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

71

BLM Series Chip Ferrite Bead

BLM18E

Series (0603 Size)

For GHz band noise, also capable to large current.

Dimensions

1.6

±

0.15

0.8

±

0.15

Equivalent Circuit

(Resistance element becomes dominant at high frequencies.)

0.4

±

0.2

Part Number T

BLM18EG

ppp

TN1

0.5

±

0.15

BLM18EG

ppp

SN1

0.8

±

0.15

Packaging

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

4000

10000

1000

: Electrode

(in mm)

Refer to pages from p.82 to p.85 for mounting information.

Rated Value (p: packaging code)

Part Number

BLM18EG101TN1

p

BLM18EG121SN1

p

BLM18EG221SN1

p

BLM18EG221TN1

p

BLM18EG331TN1

p

BLM18EG391TN1

p

BLM18EG471SN1

p

BLM18EG601SN1

p

Number of Circuits: 1

Impedance

(at 100MHz/20

°

C)

100ohm

±

25%

120ohm

±

25%

220ohm

±

25%

220ohm

±

25%

330ohm

±

25%

390ohm

±

25%

470ohm

±

25%

600ohm

±

25%

Impedance

(at 1GHz/20

°

C)

140ohm(Typ.)

145ohm(Typ.)

260ohm(Typ.)

300ohm(Typ.)

450ohm(Typ.)

520ohm(Typ.)

550ohm(Typ.)

700ohm(Typ.)

Impedance-Frequency Characteristics (Main Items)

BLM18EG_TN Series

1000

800

600

BLM18EG391TN1

BLM18EG331TN1

Rated Current

2000mA

2000mA

2000mA

1000mA

500mA

500mA

500mA

500mA

DC Resistance

(max.)

0.045ohm

0.04ohm

0.05ohm

0.15ohm

0.21ohm

0.3ohm

0.21ohm

0.35ohm

Notice (Rating)

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

In operating temperature exceeding +85

°

C, derating of current is necessary for

BLM18EG series.

Please apply the derating curve shown in chart according to the operating temperature.

BLM18EG221TN1

Derating

400

BLM18EG101TN1

200

3

0

1 10

BLM18EG_SN Series

1000

100

Frequency (MHz)

1000 3000

2

1

800

600

400

BLM18EG601SN1

BLM18EG471SN1

BLM18EG221SN1

BLM18EG121SN1

200

0

85

Operating Temperature [

°

C]

125

0

1 10 100

Frequency (MHz)

1000 3000

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

72

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM18E Series (0603 Size)

Impedance-Frequency Characteristics

BLM18EG101TN1

160

120

80

40

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18EG221TN1

400

300

200

100

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18EG471SN1

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18EG121SN1

200

160

120

80

40

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18EG331TN1

600

450

300

150

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18EG601SN1

1000

750

500

250

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18EG221SN1

400

300

200

100

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLM18EG391TN1

700

560

420

280

140

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

73

BLM Series Chip Ferrite Bead

BLM15G

Series (0402 Size)

Available up to high-GHz band noise.

Dimensions

0.25

±

0.1

Equivalent Circuit

2000

1500

1000

500

0

1

1.0

±

0.05

0.5

±

0.05

: Electrode

(in mm)

(Resistance element becomes dominant at high frequencies.)

Packaging

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

10000

50000

1000

Refer to pages from p.82 to p.85 for mounting information.

Rated Value (p: packaging code)

Part Number

BLM15GG221SN1

p

BLM15GG471SN1

p

BLM15GA750SN1

p

Number of Circuits: 1

Impedance

(at 100MHz/20

°

C)

220ohm

±

25%

470ohm

±

25%

75ohm

±

25%

Impedance

(at 1GHz/20

°

C)

600ohm

±

40%

1200ohm

±

40%

1000ohm

±

40%

Impedance-Frequency Characteristics (Main Items)

2500

Rated Current

300mA

200mA

200mA

DC Resistance

(max.)

0.7ohm

1.3ohm

1.3ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

BLM15GG471SN1

BLM15GG221SN1

BLM15GA750SN1

10 100

Frequency (MHz)

1000 3000

Impedance-Frequency Characteristics

BLM15GG221SN1

1500

1200

900

600

300

0

1 10 100

Frequency (MHz)

Z

R

X

1000 3000

BLM15GG471SN1

1500

1250

1000

750

500

250

0

1 10 100

Frequency (MHz)

Z

R

X

1000 3000

BLM15GA750SN1

2500

2000

1500

1000

500

0

1 10 100

Frequency (MHz)

Z

R

X

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

74

C31E.pdf

09.4.20

BLM Series Chip Ferrite Bead

BLM18G

Series (0603 Size)

Available up to high-GHz band noise.

Dimensions

0.35

±

0.15

Equivalent Circuit

1.6

±

0.1

0.8

±

0.1

: Electrode

(in mm)

(Resistance element becomes dominant at high frequencies.)

Packaging

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

4000

10000

1000

Refer to pages from p.82 to p.85 for mounting information.

Rated Value (p: packaging code)

Part Number

Impedance

(at 100MHz/20

°

C)

470ohm

±

25%

Impedance

(at 1GHz/20

°

C)

1800ohm

±

30%

BLM18GG471SN1

p

Number of Circuits: 1

Impedance-Frequency Characteristics (Main Items)

2000

Rated Current

200mA

DC Resistance

(max.)

1.30ohm

Operating

Temperature Range

-55

°

C to +125

°

C

1500

1000

500

BLM18GG471SN1

0

1 10 100

Frequency (MHz)

1000 3000

Impedance-Frequency Characteristics

BLM18GG471SN1

2000

1500

1000

500

0

1

Z

R

10 100

Frequency (MHz)

X

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

75

BLA Series Chip Ferrite Bead

BLA2AA

/

BLA2AB

Series (0804 Size)

4-lines array, 0804 size.

Dimensions

(1) (2) (3) (4)

Equivalent Circuit

(1) (2) (3) (4)

(5) (6) (7)

2.0

±

0.2

(8)

0.25

±

0.15

0.5

±

0.1

(5) (6) (7)

No polarity.

Packaging

(8)

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

10000

50000

1000

: Electrode

(in mm)

Refer to pages from p.82 to p.85 for mounting information.

Rated Value (p: packaging code)

Part Number

BLA2AAG121SN4

p

BLA2AAG221SN4

p

BLA2AAG601SN4

p

BLA2AAG102SN4

p

BLA2ABB100SN4

p

BLA2ABB220SN4

p

BLA2ABB470SN4

p

BLA2ABB121SN4

p

BLA2ABB221SN4

p

BLA2ABD750SN4

p

BLA2ABD121SN4

p

BLA2ABD221SN4

p

BLA2ABD471SN4

p

BLA2ABD601SN4

p

BLA2ABD102SN4

p

Number of Circuits: 4

Impedance

(at 100MHz/20

°

C)

120ohm

±

25%

220ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

10ohm

±

25%

22ohm

±

25%

47ohm

±

25%

120ohm

±

25%

220ohm

±

25%

75ohm

±

25%

120ohm

±

25%

220ohm

±

25%

470ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

Rated Current

Impedance-Frequency Characteristics (Main Items)

BLA2AAG Series

1200

BLA2ABB Series

800

BLA2AAG102SN4

100mA

50mA

50mA

50mA

200mA

200mA

200mA

50mA

50mA

200mA

200mA

100mA

100mA

100mA

50mA

900

BLA2ABB221SN4

BLA2AAG601SN4

600

DC Resistance

(max.)

0.50ohm

0.70ohm

1.10ohm

1.30ohm

0.1ohm

0.2ohm

0.35ohm

0.60ohm

0.90ohm

0.20ohm

0.35ohm

0.40ohm

0.65ohm

0.80ohm

1.00ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

BLA2ABB121SN4

600

400

300

BLA2AAG221SN4

BLA2AAG121SN4

200

BLA2ABB470SN4

BLA2ABB220SN4

BLA2ABB100SN4

0

1 10 100

Frequency (MHz)

1000 3000

0

1 10 100

Frequency (MHz)

1000 3000

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

76

C31E.pdf

09.4.20

BLA Series Chip Ferrite Bead

BLA2AA/BLA2AB Series (0804 Size)

Impedance-Frequency Characteristics (Main Items)

BLA2ABD Series

1600

1200

800

400

BLA2ABD102SN4

BLA2ABD601SN4

BLA2ABD471SN4

BLA2ABD221SN4

BLA2ABD121SN4

BLA2ABD750SN4

0

1 10 100

Frequency (MHz)

1000 3000

Impedance-Frequency Characteristics

BLA2AAG121SN4

200

BLA2AAG221SN4

400

BLA2AAG601SN4

800

150

100

Z

R

50

0

1

X

10 100

Frequency (MHz)

BLA2AAG102SN4

1200

900

600

100

Z

R

300

0

1

X

10 100

Frequency (MHz)

BLA2ABB470SN4

200

0

1 10 100

Frequency (MHz)

BLA2ABD750SN4

200

1000 3000

1000 3000

Z

R

X

1000 3000

300

200

Z

R

100

0

1

X

10 100

Frequency (MHz)

1000 3000

BLA2ABB100SN4

50

40

30

20

10

0

1 10 100

Frequency (MHz)

R

X

Z

1000 3000

BLA2ABB121SN4

500

400

300

200

100

0

1 10 100

Frequency (MHz)

Z

R

X

1000 3000

BLA2ABD121SN4

300

600

400

R

Z

200

0

1

X

10 100

Frequency (MHz)

BLA2ABB220SN4

100

1000 3000

75

50

Z

X

25

0

1 10 100

Frequency (MHz)

R

1000 3000

BLA2ABB221SN4

1000

800

600

400

200

0

1 10 100

Frequency (MHz)

Z

R

X

1000 3000

BLA2ABD221SN4

600

150

225

450

100

Z

R

X

150

Z

R

X

300

Z

R

X

50

75

150

0

1 10 100

Frequency (MHz)

1000 3000

0

1 10 100

Frequency (MHz)

1000 3000

0

1 10 100

Frequency (MHz)

1000 3000

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

77

BLA Series Chip Ferrite Bead

BLA2AA/BLA2AB Series (0804 Size)

Impedance-Frequency Characteristics

BLA2ABD471SN4

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLA2ABD601SN4

1000

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLA2ABD102SN4

1600

1200

800

400

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

78

C31E.pdf

09.4.20

BLA Series Chip Ferrite Bead

BLA31A

/

BLA31B

Series (1206 Size)

4-lines array, 1206 size.

Dimensions

(1) (2) (3) (4)

Equivalent Circuit

(1) (2) (3) (4)

(5) (6) (7) (8)

0.4

±

0.2

3.2

±

0.2

0.8

±

0.1

(5) (6) (7)

No polarity.

Packaging

(8)

Code Packaging

D

180mm Reel Paper Tape

J

330mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

4000

10000

1000

: Electrode

(in mm)

Refer to pages from p.82 to p.85 for mounting information.

Rated Value (p: packaging code)

Part Number

BLA31AG300SN4

p

BLA31AG600SN4

p

BLA31AG121SN4

p

BLA31AG221SN4

p

BLA31AG601SN4

p

BLA31AG102SN4

p

BLA31BD121SN4

p

BLA31BD221SN4

p

BLA31BD471SN4

p

BLA31BD601SN4

p

BLA31BD102SN4

p

Number of Circuits: 4

Impedance

(at 100MHz/20

°

C)

30ohm

±

25%

60ohm

±

25%

120ohm

±

25%

220ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

120ohm

±

25%

220ohm

±

25%

470ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

Rated Current

Impedance-Frequency Characteristics (Main Items)

BLA31AG Series

1200

BLA31BD Series

2000

200mA

200mA

150mA

150mA

100mA

50mA

150mA

150mA

100mA

100mA

50mA

BLA31AG600SN4

900

600

BLA31AG102SN4

BLA31AG601SN4

BLA31AG221SN4

BLA31AG121SN4

BLA31AG300SN4

1500

1000

BLA31BD102SN4

BLA31BD601SN4

BLA31BD471SN4

BLA31BD221SN4

BLA31BD121SN4

DC Resistance

(max.)

0.10ohm

0.15ohm

0.20ohm

0.25ohm

0.35ohm

0.45ohm

0.30ohm

0.35ohm

0.40ohm

0.45ohm

0.55ohm

300 500

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

0

1 10 100

Frequency (MHz)

1000 3000

0

1 10 100

Frequency (MHz)

1000 3000

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

79

BLA Series Chip Ferrite Bead

BLA31A/BLA31B Series (1206 Size)

Impedance-Frequency Characteristics

BLA31AG300SN4

40

30

20

10

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLA31AG221SN4

300

225

150

75

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLA31BD121SN4

300

225

150

75

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLA31BD601SN4

1000

750

500

250

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLA31AG600SN4

80

60

40

20

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLA31AG601SN4

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLA31BD221SN4

500

375

250

125

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLA31BD102SN4

2000

1500

1000

500

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLA31AG121SN4

200

150

100

50

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLA31AG102SN4

1200

900

600

300

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

BLA31BD471SN4

800

600

400

200

0

1

Z

R

X

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

80

C31E.pdf

09.4.20

Chip Ferrite Bead

!

Caution/Notice

!Caution

Rating

1. About the Rated Current

Do not use products beyond the rated current as this may create excessive heat and deteriorate the insulation resistance.

2. About the Excessive Surge Current

Excessive surge current ( pulse current or rush current) than specified rated current applied to the product may cause a critical failure, such as an open circuit, burnout caused by excessive temperature rise. Please contact us in advance in case of applying the surge current.

Soldering and Mounting

• Self-heating

Please provide special attention when mounting chip ferrite beads BLM_AX/P/K/S series in close proximity to other products that radiate heat.

The heat generated by other products may deteriorate the insulation resistance and cause excessive heat in this component.

Storage and Operating Conditions

<Operating Environment>

Do not use products in a chemical atmosphere such as chlorine gas, acid or sulfide gas.

Do not use products in the environment close to the organic solvent.

<Storage and Handling Requirements>

1. Storage Period

BLM15E/15H/15G series should be used within 12 months, the other series should be used within 6 months.

Solderability should be checked if this period is exceeded.

2. Storage Conditions

(1) Storage temperature: -10 to +40˚C

Relative humidity: 30 to 70%

Avoid sudden changes in temperature and humidity.

(2) Do not store products in a chemical atmosphere

such as chlorine gas, acid or sulfide gas.

Notice

Handling

• Resin Coating

Using resin for coating/molding products may affect the products performance.

So please pay careful attention in selecting resin.

Prior to use, please make the reliability evaluation with the product mounted in your application set.

Notice (Soldering and Mounting)

1. Cleaning

Failure and degradation of a product are caused by the cleaning method. When you clean in conditions that are not in mounting information, please contact

Murata engineering.

2. Soldering

Reliability decreases with improper soldering methods.

Please solder by the standard soldering conditions shown in mounting information.

3. Other

Noise suppression levels resulting from Murata's EMI suppression filters EMIFIL r may vary, depending on the circuits and ICs used, type of noise, mounting pattern, mounting location, and other operating conditions. Be sure to check and confirm in advance the noise suppression effect of each filter, in actual circuits, etc. before applying the filter in a commercialpurpose equipment design.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

81

BL

p

Chip Ferrite Bead

1. Standard Land Pattern Dimensions

Soldering and Mounting

Land Pattern

+ Solder Resist

Land Pattern

Solder Resist

(in mm)

BLM02

BLM03

BLM15

(Except BLM

15_AN1 series)

BLM18

BLM21

BLM31

BLM41

o Reflow and Flow

BLM Series

BLM pp AX/P/K/S a b

Type

BLM02

BLM03

BLM15

Soldering

Reflow

a b c

0.16-0.2

0.4-0.56

0.2-0.23

Reflow

Reflow

0.2-0.3

0.4

0.6-0.9

1.2-1.4

0.3

0.5

BLM18

Flow

(except 18G)

Reflow

0.7

2.2-2.6

0.7

1.8-2.0

BLM21

Flow/

Reflow

1.2

3.0-4.0

1.0

Except BLM03PG/15AX·PD·PG/18PG·KG·SG/21PG.

And BLM02/03/15/18G is specially adapted for reflow soldering.

a b

Type

BLM03PG

BLM15AX

BLM15P

p

Rated

Current

(A)

0.75/0.9

Soldering

Reflow

a

0.2-0.3

b c

0.6-0.9

0.3

Land Pad Thickness and Dimension d

18

µ

m 35

µ

m 70

µ

m

0.3

0.3

0.3

1.5max.

2.2max.

Reflow

0.4

1.2-1.4

0.5

0.5

0.5

1.2

0.7

0.5

0.5

BLM18PG

BLM18KG

BLM18SG

BLM21PG

0.5-1.5

1.7-2.5

3-4

6

1.5

2

3

Flow/

Reflow

0.7

1.2

Flow

2.2-2.6

Reflow

1.8-2.0

0.7

0.7

1.2

3.0-4.0

1.0

2.4

0.7

0.7

1.2

6.4

3.3

1.65

1.0

1.0

1.2

1.0

2.4

1.2

0.7

0.7

0.7

1.0

1.0

1.0

BLM31PG

BLM41PG

6

1.5/2

3

6

1.5/2

3

2.0

3.0

4.2-5.2

5.5-6.5

6.4

1.2

2.4

1.2

6.4

1.2

2.4

3.3

1.2

1.2

3.3

1.65

1.2

1.2

1.65

1.2

1.2

1.2

1.2

6 6.4

3.3

1.65

Do not apply narrower pattern than listed above to

BLM pp

AX/P/K/S.

Narrow pattern can cause excessive heat or open circuit.

BLA2A

BLA31

o

Reflow Soldering

BLA2A

1.75

o Reflow and Flow

BLA31

2.8

0.5 Pitch 0.25

0.8 Pitch 0.4

• If there are high amounts of self-heating on pattern, the contact points of PCB and part may become damaged.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

82

C31E.pdf

09.4.20

BL

p

Chip Ferrite Bead Soldering and Mounting

2. Solder Paste Printing and Adhesive Application

When reflow soldering the chip ferrite beads, the printing must be conducted in accordance with the following cream solder printing conditions.

If too much solder is applied, the chip will be prone to damage by mechanical and thermal stress from the PCB and may crack.

Standard land dimensions should be used for resist and copper foil patterns.

Series

BLM

(Except BLM

15_AN1 series)

Solder Paste Printing

o Ensure that solder is applied smoothly to a minimum height of 0.2mm to 0.3mm at the end surface of the part.

o Guideline of solder paste thickness:

50-80

µ m: BLM02

100-150

µ m: BLM03

100-200

µ m: BLM15/18/21/31/41

When flow soldering the chip ferrite beads, apply the adhesive in accordance with the following conditions.

If too much adhesive is applied, then it may overflow into the land or termination areas and yield poor solderability.

In contrast, if insufficient adhesive is applied, or if the adhesive is not sufficiently hardened, then the chip may become detached during flow soldering process.

(in mm)

Adhesive Application

BLM18/21/31/41 Series

(Except BLM18G Series)

Coating amount is illustrated in the following diagram.

Chip Solid Inductor a: 20

70

µ m b: 30

35

µ m c: 50

105

µ m a c b

PCB

Bonding agent

Land

BLA

o Guideline of solder paste thickness:

100-150

µ m: BLA2A

150-200

µ m: BLA31

0.4

BLA31 BLA2A

1.75

BLA31 Series

Coating amount is illustrated in the following diagram.

PCB

Chip Solid Inductor

Bonding Agent

Land a: 20

70

µ m b: 30

35

µ m c: 50

105

µ m a b c

0.25

0.25

0.8

3. Standard Soldering Conditions

(1) Soldering Methods

Use flow and reflow soldering methods only.

Use standard soldering conditions when soldering chip ferrite beads.

In cases where several different parts are soldered, each having different soldering conditions, use those conditions requiring the least heat and minimum time.

Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based solder will deteriorate performance of products.

If using BLA series with Sn-Zn based solder, please contact Murata in advance.

Flux: o Use Rosin-based flux.

In case of using RA type solder, products should be cleaned completely with no residual flux.

o Do not use strong acidic flux (with chlorine content exceeding 0.20wt%) o Do not use water-soluble flux.

For additional mounting methods, please contact Murata.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

83

BL

p

Chip Ferrite Bead Soldering and Mounting

(2) Soldering Profile o Flow Soldering profile

( Sn-3.0Ag-0.5Cu Solder)

T3

T2 t2

Heating

T1

Limit Profile

Standard Profile

Series

BLM (Except BLM02/03/15/18G )

BLA31

Pre-heating t1

Time (s)

Pre-heating

Temp. (T1)

150

°

C

Time. (t1)

60s min.

Standard Profile

Heating

Temp. (T2) Time. (t2)

Cycle of Flow

250

°

C 4 to 6s

2 times max.

Limit Profile

Heating

Temp. (T3) Time. (t2)

265

±

3

°

C 5s max.

Cycle of Flow

2 times max.

o Reflow Soldering Profile

(Sn-3.0Ag-0.5Cu Solder)

Series

180

150

T2

T1

T4

T3

Pre-heating t1 t2

90s

±

30s

Limit Profile

Standard Profile

Time (s)

Heating

Temp. (T1)

Standard Profile

Time. (t1)

Peak

Temperature

(T2)

Cycle of Reflow

220

°

C min.

30 to 60s 245

±

3

°

C

2 times max.

Heating

Temp. (T3)

Limit Profile

Time. (t2)

Peak

Temperature

(T4)

Cycle of Reflow

230

°

C min.

60s max.

260

°

C/10s

2 times max.

BLM

BLA

(3) Reworking with Solder Iron

The following conditions must be strictly followed when using a soldering iron.(Except BLM02 Series)

Pre-heating: 150

°

C 60s min.

Soldering iron power output / Tip diameter:

80W max. / ø3mm max.

Temperature of soldering iron tip / Soldering time / Times:

350

°

C max. / 3-4s / 2 times

Do not allow the tip of the soldering iron to directly contact the chip.

For additional methods of reworking with a soldering iron, please contact Murata engineering.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

84

C31E.pdf

09.4.20

BL

p

Chip Ferrite Bead Soldering and Mounting

4. Cleaning

Following conditions should be observed when cleaning chip ferrite beads.

(1) Cleaning Temperature: 60

°

C max. (40

°

C max. for alcohol type cleaner)

(2) Ultrasonic

Output: 20W/liter max.

Duration: 5 minutes max.

Frequency: 28 to 40kHz

(3) Cleaning Agent

The following list of cleaning agents have been tested on the individual components. Evaluation of final assembly should be completed prior to production.

5. Mounting of BLM15_AN1 Series

BLM15_AN1 is series for wire bonding mounting.

(1) Die Bonding Mounting

(a) Dimension of Standard Metal Mask

Chip Ferrite Bead

Metal thickness: 50

µ m

0.7

(in mm)

(a) Alcohol cleaning agent

Isopropyl alcohol (IPA)

(b) Aqueous cleaning agent

Pine Alpha ST-100S

(4) Ensure that flux residue is completely removed.

Component should be thoroughly dried after aqueous agent has been removed with deionized water.

(5) BLM_G type is processed with resin. On rinsing the product, using water for ultrasonic cleaning may affect the resin quality used for the product by water element. In case of set cleaning conditions, please make sure the reliability according to the cleaning conditions.

(b) Die Bonding Agent o Use adhesive for die bonding for which the curing temperature is 200

°

C or less.

(c) Notice o

Use a flat surface of substrate for bonding mounting.

Slant mounting of product may affect the wire bonding.

o Adhesive for die bonding may affect the mounting reliability in wire bonding.

Make sure of the mounting reliability with the adhesive to be used in advance.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

85

BL

p

Chip Ferrite Bead Packaging

Minimum Quantity and Dimensions of 8mm Width Paper / Embossed Tape

1

4.0

2.0

±

0.05

±

0.1

4.0

±

0.1

ø1.5

+0.1

-0

<Embossed> c d

<Paper>

BLM02/03

Part Number

BLM02

BLM03

BLM15

BLM18

BLM18EG/KG_TN

BLM18EG/KG_SN

BLM18S

BLM18T

BLM21

BLM31

BLM21BD222SN1/272SN1

BLA2A

BLA31

Direction of Feed b

There are holes in the cavities of the BLM21BD222SN1/

BD272SN1 and BLM31 only. ø1.0

+0.3

-0

1

BLM02/03/15/18S/18T: 2.0

±

0.05

BLA2A: 2.0

±

0.1

c: Depth of Cavity

(Embossed Tape) c c c: Total Thickness of Tape

(Paper Tape)

Cavity Size (mm)

1.85

1.05

1.85

1.85

2.25

3.5

2.25

2.2

3.4

a

0.45

0.70

1.15

1.85

b

0.25

0.40

0.65

1.05

1.05

1.05

1.45

1.9

1.45

1.2

1.8

c

0.40 max.

0.55 max.

0.8 max.

1.1 max.

0.85 max.

1.1 max.

0.90 max.

0.90 max.

1.1 max.

1.3

1.3

0.8 max.

1.1 max.

-

-

-

-

0.2

0.2

-

-

-

-

d

-

-

Minimum Qty. (pcs.)

ø180mm Reel ø330mm Reel

Paper Tape Embossed Tape Paper Tape Embossed Tape

Bulk

20000

15000

10000

4000

-

-

-

-

-

50000

50000

10000

-

-

-

-

1000

1000

1000

1000

4000 10000 1000

10000

10000

4000

-

-

10000

4000

-

-

-

3000

3000

-

-

30000

-

10000

-

-

50000

10000

-

-

-

10000

10000

-

-

1000

1000

1000

1000

1000

1000

1000

(in mm)

Minimum Quantity and Dimensions of 12mm Width Embossed Tape

4.0

±

2.0

±

0.05

0.1

4.0

±

0.1

ø1.5

+0.1

-0

0.3

±

0.1

c

Part Number

BLM41

Cavity Size Minimum Qty. (pcs.) a b c

4.8

1.9

1.75

ø180mm Reel ø330mm Reel

2500 8000

Bulk

1000

ø1.5

+0.3

-0 b Direction of Feed c: Depth of Cavity

(in mm)

"Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity".

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

86

C31E.pdf

09.4.20

BL

p

Chip Ferrite Bead

Design Kits

o

EKEMBL03D (Chip Ferrite Beads 01005 Size / 0201 Size)

No.

14

15

16

17

10

11

12

13

18

19

20

21

22

6

7

4

5

8

9

1

2

3

Part Number

BLM02AG100SN1

BLM02AG700SN1

BLM02AG121SN1

BLM03AG100SN1

BLM03AG700SN1

BLM03AG800SN1

BLM03AG121SN1

BLM03AG241SN1

BLM03AG601SN1

BLM03AG102SN1

BLM03BB100SN1

BLM03BB220SN1

BLM03BB470SN1

BLM03BB750SN1

BLM03BB121SN1

BLM03BD750SN1

BLM03BD121SN1

BLM03BD241SN1

BLM03BD471SN1

BLM03BD601SN1

BLM03PG220SN1

BLM03PG330SN1

Quantity

(pcs.)

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

Impedance typ.

(at 100MHz, 20 degrees C)

10

(Typ.)

70

Ω±

25%

120

Ω±

25%

10

(Typ.)

70

(Typ.)

80

Ω±

25%

120

Ω±

25%

240

Ω±

25%

600

Ω±

25%

1000

Ω±

25%

10

Ω±

25%

22

Ω±

25%

47

Ω±

25%

75

Ω±

25%

120

Ω±

25%

75

Ω±

25%

120

Ω±

25%

240

Ω±

25%

470

Ω±

25%

600

Ω±

25%

22

Ω±

25%

33

Ω±

25%

Rated Current

(mA)

200

200

200

100

100

300

200

200

500

250

200

500

200

200

100

300

250

200

215

200

900

750

DC Resistance

(

) max.

1.5

2.5

0.4

0.5

0.7

1.0

1.5

0.4

0.1

0.5

0.8

0.1

0.4

0.4

0.5

0.8

0.5

0.8

1.5

1.7

0.065

0.090

29

30

31

32

25

26

27

28

21

22

23

24

17

18

19

20

37

38

39

40

33

34

35

36

13

14

15

16

9

10

11

12

5

6

7

8

1

2

3

4

BLM15AG100SN1

BLM15AG700SN1

BLM15AG121SN1

BLM15AG221SN1

BLM15AG601SN1

BLM15AG102SN1

BLM15AX100SN1

BLM15AX700SN1

BLM15AX121SN1

BLM15AX221SN1

BLM15AX601SN1

BLM15AX102SN1

BLM15BA050SN1

BLM15BA100SN1

BLM15BA220SN1

BLM15BA330SN1

BLM15BA470SN1

BLM15BA750SN1

BLM15BB050SN1

BLM15BB100SN1

BLM15BB220SN1

BLM15BB470SN1

BLM15BB750SN1

BLM15BB121SN1

BLM15BB221SN1

BLM15BD750SN1

BLM15BD121SN1

BLM15BD221SN1

BLM15BD471SN1

BLM15BD601SN1

BLM15BD102SN1

BLM15BD182SN1

BLM15HD601SN1

BLM15HD102SN1

BLM15HD182SN1

BLM15HG601SN1

BLM15HG102SN1

BLM15HB121SN1

BLM15HB221SN1

BLM15EG121SN1

o

EKEMBL15K (Chip Ferrite Beads 0402 Size)

No.

Part Number

Quantity

(pcs.)

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

Impedance typ.

(at 100MHz, 20 degrees C)

10

(Typ.)

70

(Typ.)

120

Ω±

25%

220

Ω±

25%

600

Ω±

25%

1000

Ω±

25%

10

(Typ.)

70

Ω±

25%

120

Ω±

25%

220

Ω±

25%

600

Ω±

25%

1000

Ω±

25%

5

Ω±

25%

10

Ω±

25%

22

Ω±

25%

33

Ω±

25%

47

Ω±

25%

75

Ω±

25%

5

Ω±

25%

10

Ω±

25%

22

Ω±

25%

47

Ω±

25%

75

Ω±

25%

120

Ω±

25%

220

Ω±

25%

75

Ω±

25%

120

Ω±

25%

220

Ω±

25%

470

Ω±

25%

600

Ω±

25%

1000

Ω±

25%

1800

Ω±

25%

600

Ω±

25%

1000

Ω±

25%

1800

Ω±

25%

600

Ω±

25%

1000

Ω±

25%

120

Ω±

25%

220

Ω±

25%

120

Ω±

25%

Rated Current

(mA)

200

100

300

250

200

300

250

300

250

1500

300

300

300

300

200

300

300

300

200

200

780

680

580

420

350

300

300

300

1000

500

500

300

300

200

1740

300

200

200

500

300

DC Resistance

(

) max.

0.30

0.40

0.60

0.65

0.90

1.40

0.85

1.25

0.08

0.10

0.20

0.35

0.40

0.55

0.80

0.20

0.34

0.49

0.10

0.20

0.30

0.40

0.60

0.80

0.05

0.15

0.25

0.35

0.60

1.00

0.02

0.10

0.13

0.18

2.20

0.70

1.10

0.70

1.00

0.095

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

87

BL

p

Chip Ferrite Bead Design Kits

No.

41

42

43

44

45

46

47

48

49

Continued from the preceding page.

Part Number

BLM15EG221SN1

BLM15GG221SN1

BLM15GG471SN1

BLM15GA750SN1

BLM15PG100SN1

BLM15PD300SN1

BLM15PD600SN1

BLM15PD800SN1

BLM15PD121SN1

Quantity

(pcs.)

10

10

10

10

10

10

10

10

10

Impedance typ.

(at 100MHz, 20 degrees C)

220

Ω±

25%

220

Ω±

25%

470

Ω±

25%

75

Ω±

25%

10

(Typ.)

30

Ω±

25%

60

Ω±

25%

80

Ω±

25%

120

Ω±

25%

Rated Current

(mA)

700

300

200

200

1000

2200

1700

1500

1300

DC Resistance

(

) max.

0.28

0.70

1.30

1.30

0.05

0.035

0.06

0.07

0.09

o

EKEMBL18G (Chip Ferrite Beads 0603 Size)

No.

Part Number

Quantity

(pcs.)

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

BLM18AG121SN1

BLM18AG151SN1

BLM18AG221SN1

BLM18AG331SN1

BLM18AG471SN1

BLM18AG601SN1

BLM18AG102SN1

BLM18BA050SN1

BLM18BA100SN1

BLM18BA470SN1

BLM18BA750SN1

BLM18BA121SN1

BLM18BB050SN1

BLM18BB100SN1

BLM18BB220SN1

BLM18BB470SN1

BLM18BB600SN1

BLM18BB750SN1

BLM18BB121SN1

BLM18BB151SN1

BLM18BB221SN1

BLM18BB331SN1

BLM18BB471SN1

BLM18BD470SN1

BLM18BD121SN1

BLM18BD151SN1

BLM18BD221SN1

BLM18BD331SN1

BLM18BD421SN1

BLM18BD471SN1

BLM18BD601SN1

BLM18BD102SN1

BLM18BD152SN1

BLM18BD182SN1

BLM18BD222SN1

BLM18BD252SN1

BLM18PG300SN1

BLM18PG330SN1

BLM18PG600SN1

BLM18PG121SN1

BLM18PG181SN1

BLM18PG221SN1

BLM18PG331SN1

BLM18PG471SN1

BLM18KG260TN1

BLM18KG700TN1

BLM18KG121TN1

BLM18KG221SN1

BLM18KG331SN1

BLM18KG471SN1

BLM18KG601SN1

BLM18SG260TN1

BLM18SG700TN1

BLM18SG121TN1

BLM18SG221TN1

BLM18SG331TN1

BLM18RK121SN1

BLM18RK471SN1

BLM18RK601SN1

BLM18RK102SN1

36

37

38

39

40

31

32

33

34

35

26

27

28

29

30

21

22

23

24

25

16

17

18

19

20

11

12

13

14

15

8

9

6

7

10

3

4

1

2

5

56

57

58

59

60

51

52

53

54

55

46

47

48

49

50

41

42

43

44

45

Impedance typ.

(at 100MHz, 20 degrees C)

25%

330

Ω±

25%

420

Ω±

25%

470

Ω±

25%

600

Ω±

25%

1000

Ω±

25%

1500

Ω±

25%

1800

Ω±

25%

2200

Ω±

25%

2500

Ω±

25%

30

(Typ.)

33

Ω±

25%

60

(Typ.)

120

Ω±

25%

180

Ω±

25%

220

Ω±

25%

330

Ω±

25%

470

Ω±

25%

26

Ω±

25%

70

Ω±

25%

120

Ω±

25%

220

Ω±

25%

330

Ω±

25%

470

Ω±

25%

600

Ω±

25%

26

Ω±

25%

70

Ω±

25%

120

Ω±

25%

220

Ω±

25%

330

Ω±

25%

120

Ω±

25%

470

Ω±

25%

600

Ω±

25%

1000

Ω±

25%

120

Ω±

25%

150

Ω±

25%

220

Ω±

25%

330

Ω±

25%

470

Ω±

25%

600

Ω±

25%

1000

Ω±

25%

5

Ω±

25%

10

Ω±

25%

47

Ω±

25%

75

Ω±

25%

120

Ω±

25%

5

Ω±

25%

10

Ω±

25%

22

Ω±

25%

47

Ω±

25%

60

Ω±

25%

75

Ω±

25%

120

Ω±

25%

150

Ω±

25%

220

Ω±

25%

330

Ω±

25%

470

Ω±

25%

47

Ω±

25%

120

Ω±

25%

150

Ω±

25%

220

Ω±

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

88

C31E.pdf

09.4.20

DC Resistance

(

) max.

0.65

0.85

1.20

1.50

1.50

1.50

0.05

0.025

0.10

0.05

0.45

0.58

0.85

0.30

0.40

0.40

0.45

0.50

0.55

0.55

0.70

0.90

0.05

0.10

0.20

0.25

0.25

0.30

0.30

0.37

0.18

0.25

0.25

0.30

0.35

0.38

0.50

0.20

0.25

0.55

0.09

0.10

0.15

0.20

0.007

0.022

0.030

0.050

0.080

0.130

0.150

0.007

0.020

0.025

0.040

0.070

0.25

0.5

0.6

0.8

Rated Current

(mA)

100

50

50

50

50

200

200

200

200

200

400

300

200

200

200

550

500

500

450

450

200

700

700

600

550

400

500

500

300

300

500

500

500

500

500

500

3000

2200

1700

1500

1300

6000

4000

3000

2500

1500

1000

3000

500

2000

1500

1400

1200

1000

6000

3500

200

200

200

200

BL

p

Chip Ferrite Bead Design Kits

o

EKEMBL8GA (Chip Ferrite Beads 0603 Size / for High Frequency Type)

No.

13

14

15

16

9

10

11

12

7

8

5

6

3

4

1

2

21

22

23

24

25

17

18

19

20

Part Number

BLM18HG471SN1

BLM18HG601SN1

BLM18HG102SN1

BLM18HB121SN1

BLM18HB221SN1

BLM18HB331SN1

BLM18HD471SN1

BLM18HD601SN1

BLM18HD102SN1

BLM18HE601SN1

BLM18HE102SN1

BLM18HE152SN1

BLM18HK331SN1

BLM18HK471SN1

BLM18HK601SN1

BLM18HK102SN1

BLM18EG101TN1

BLM18EG121SN1

BLM18EG221TN1

BLM18EG221SN1

BLM18EG331TN1

BLM18EG391TN1

BLM18EG471SN1

BLM18EG601SN1

BLM18GG471SN1

Quantity

(pcs.)

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

Impedance

(at 100MHz, 20 degrees C)

470

Ω±

25%

600

Ω±

25%

1000

Ω±

25%

120

Ω±

25%

220

Ω±

25%

330

Ω±

25%

470

Ω±

25%

600

Ω±

25%

1000

Ω±

25%

600

Ω±

25%

1000

Ω±

25%

1500

Ω±

25%

330

Ω±

25%

470

Ω±

25%

600

Ω±

25%

1000

Ω±

25%

100

Ω±

25%

120

Ω±

25%

220

Ω±

25%

220

Ω±

25%

330

Ω±

25%

390

Ω±

25%

470

Ω±

25%

600

Ω±

25%

470

Ω±

25%

Impedance

(at 1GHz, 20 degrees C)

600

(Typ.)

700

(Typ.)

1000

(Typ.)

500

Ω±

40%

1100

Ω±

40%

1600

Ω±

40%

1000

(Typ.)

1200

(Typ.)

1700

(Typ.)

600

(Typ.)

1000

(Typ.)

1500

(Typ.)

400

(Typ.)

600

(Typ.)

700

(Typ.)

1200

(Typ.)

140

(Typ.)

145

(Typ.)

300

(Typ.)

260

(Typ.)

450

(Typ.)

520

(Typ.)

550

(Typ.)

700

( Typ.)

1800

Ω±

30%

Rated Current

(mA)

DC Resistance

(

) max.

50

800

600

500

200

200

100

50

200

200

100

200

100

50

100

100

2000

2000

1000

2000

500

500

500

500

200

1.80

0.25

0.35

0.50

0.50

0.70

0.90

1.50

0.85

1.00

1.60

0.50

0.80

1.20

1.20

1.50

0.045

0.04

0.15

0.05

0.21

0.30

0.21

0.35

1.30

o

EKEMBL21D (Chip Ferrite Beads 0805 Size / for Large-current P Type)

No.

Part Number

BLM21AG121SN1

BLM21AG151SN1

BLM21AG221SN1

BLM21AG331SN1

BLM21AG471SN1

BLM21AG601SN1

BLM21AG102SN1

BLM21BB050SN1

BLM21BB600SN1

BLM21BB750SN1

BLM21BB121SN1

BLM21BB221SN1

BLM21BB331SN1

BLM21BB471SN1

BLM21BD121SN1

BLM21BD221SN1

BLM21BD421SN1

BLM21BD471SN1

BLM21BD601SN1

BLM21BD102SN1

BLM21BD152SN1

BLM21BD182SN1

BLM21BD222SN1

BLM21BD222TN1

BLM21BD272SN1

BLM21PG220SN1

BLM21PG300SN1

BLM21PG600SN1

BLM21PG221SN1

BLM21PG331SN1

BLM31PG330SN1

BLM31PG500SN1

BLM31PG121SN1

BLM31PG391SN1

BLM31PG601SN1

BLM41PG600SN1

BLM41PG750SN1

BLM41PG181SN1

BLM41PG471SN1

BLM41PG102SN1

28

29

30

31

24

25

26

27

20

21

22

23

16

17

18

19

36

37

38

39

40

32

33

34

35

12

13

14

15

8

9

10

11

5

6

7

3

4

1

2

Quantity

(pcs.)

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

Impedance typ.

(at 100MHz, 20 degrees C)

420

Ω±

25%

470

Ω±

25%

600

Ω±

25%

1000

Ω±

25%

1500

Ω±

25%

1800

Ω±

25%

2250

(Typ.)

2200

Ω±

25%

2700

Ω±

25%

22

Ω±

25%

30

(Typ.)

60

Ω±

25%

220

Ω±

25%

330

Ω±

25%

33

Ω±

25%

50

(Typ.)

120

Ω±

25%

150

Ω±

25%

220

Ω±

25%

330

Ω±

25%

470

Ω±

25%

600

Ω±

25%

1000

Ω±

25%

5

Ω±

25%

60

Ω±

25%

75

Ω±

25%

120

Ω±

25%

220

Ω±

25%

330

Ω±

25%

470

Ω±

25%

120

Ω±

25%

220

Ω±

25%

120

Ω±

25%

390

(Typ.)

600

(Typ.)

60

(Typ.)

75

(Typ.)

180

(Typ.)

470

(Typ.)

1000

(Typ.)

Rated Current

(mA)

200

200

6000

3000

3000

2000

1500

6000

200

200

200

200

200

200

200

200

3000

3000

2000

1500

6000

3000

3000

2000

1500

500

200

200

200

200

200

200

200

200

200

200

200

200

200

200

DC Resistance

(

) max.

0.60

0.80

0.01

0.015

0.025

0.050

0.09

0.01

0.25

0.30

0.35

0.35

0.40

0.45

0.50

0.60

0.025

0.025

0.05

0.09

0.01

0.025

0.025

0.05

0.09

0.07

0.20

0.25

0.25

0.35

0.40

0.45

0.25

0.15

0.15

0.20

0.25

0.25

0.30

0.45

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

89

Memo

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

90

C31E.pdf

09.4.20

Chip EMIFILr

NF

Series Introduction

Part Numbering

Series Line Up

Product Detail

!Caution/Notice

Soldering and Mounting

Packaging

Design Kits

125

126

132

133

92

94

97

100

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

91

NF

p

Series Introduction

Ground Terminal Output (Input) Terminal

Example of 3 Terminal Capacitor Structure

Chip 3 terminal capacitor is chip shaped 3 terminal capacitor designed for noise suppression. Its inner structure like feed through capacitor makes its ground impedance quite low. Owing to this structure, 3 terminal capacitor has good noise suppression effect at high frequency range up to several hundred MHz.

Ground Terminal

Input (Output) Terminal Ground Terminal

Inner Feed

Through

Electrode

Cross Section

Series

NFM

Series

(3 terminal capacitor)

NFL / NFW

Series

(LC filter)

Equivalent

Circuit

Part Number

NFM18CC

NFM21CC

NFM18PC

NFM18PS

NFM21PC

NFL18ST

NFL18SP

NFL21SP

NFW31SP

NFA21S

NFA18S

NFR

Series

(RC filter)

NFR21GD

NFA31GD

NFE

Series

Feed through capacitor with ferrite cores

NFE31PT

NFE61PT

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

92

C31E.pdf

09.4.20

NF

p

Series Introduction

30

40

50

60

0

10

20

70

80

90

0.1

Multilayer Capacitor

1608 Size 1

µ

F

1

3 Terminal Capacitor

1608 Size 1

µ

F

NFM18PS105

10

Frequency (MHz)

100 1000

Insertion Loss Sample Features Applications

Example

Standard of 3 terminal capacitor

NFM_CC

Standard type with varied capacitance

Noise suppression in low speed signal lines

Low speed interface lines, sensors

NFM_PC

Meet large current, high capacitance available, for power lines

Noise suppression in power lines

Individual IC power lines

NFL_ST

T-type filter, effective in low impedance circuits

Sharp insertion loss curve enables low damage to signal waveform

NFL_SP

NFW_SP

π

-type filter, effective in high impedance circuits

π

-type filter, designed for low impedance circuits

Noise suppression in high speed signal lines

High speed interface lines

Bus lines

LCD lines

Camera I/Fs

High speed analog lines

RGB / D terminal

NFA_SL

4-line array, suitable for bus lines or flat cables

Limit noise using resistor, also loop back to ground

Meet large current, good high frequency performance because of its feed through structure

Noise suppression in signal line with unstable ground

Interface lines

Clock lines

Noise suppression in power lines / low impedance lines

Various power lines, sensors

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

93

NF

p

Chip EMIFIL

r

Capacitor

Part Numbering

(Part Number)

NF

q

M

w

3D

e

CC

r

102

t

R

y

1H

u

3

i

L

o qProduct ID

Product ID

NF

wStructure

Code

M

A

Chip EMIFILr

Structure

Capacitor Type

Capacitor Array Type eDimensions (LgW)

Code

18

21

3D

31

41

55

Dimensions (LgW)

1.6g0.8mm

2.0g1.25mm

3.2g1.25mm

3.2g1.6mm

4.5g1.6mm

5.7g5.0mm

EIA

0603

0805

1205

1206

1806

2220 rFeatures

Code

CC

PC

PS

Features

Capacitor Type for Signal Lines

Capacitor Type for Large Current

High Loss Type for Large Current tCapacitance

Expressed by three figures. The unit is in pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures.

yCharacteristics

Code

B

Capacitance Change (Temperature Characteristics)

±

10%,

±

12.5%, +10/-13%

F

R

U

S

+30/-80%, +30/-84%

±

15%, +15/-18%

-750

±

120ppm/

°

C

+350 to -1000ppm/

°

C uRated Voltage

Code

0J

1A

1C

1E

1H

2A

Rated Voltage

6.3V

10V

16V

25V

50V

100V iElectrode/Others (

NFM

Series)

Code Electrode

3

4

Sn Plating

Solder Coating

Series

NFM

(Except

NFM55

)

NFM55

iNumber of Circuits (

NFA

pp

CC

Series)

Code Number of Circuits

4

4 Circuits oPackaging

Code

L

B

D

Packaging

Embossed Taping (ø180mm Reel)

Bulk

Paper Taping (ø180mm Reel)

Series

NFM3D/NFM31/NFM41/NFM55

All series

NFM18/NFM21/NFA

pp

CC

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

94

C31E.pdf

09.4.20

NF

p

Chip EMIFIL

r

Part Numbering

LC Combined (1)

(Part Number)

NF

q

L

w

18

e

ST

r

107

t

X

y

1C

u

3 L

i o qProduct ID

Product ID

NF

wStructure

Code

L

W

E

Chip EMIFILr

Structure

Maltilayer, LC Combined Type

Wire Wound, LC Combined Type

Block, LC Combined Type eDimensions (LgW)

Code

18

21

31

61

Dimensions (LgW)

1.6g0.8mm

2.0g1.25mm

3.2g1.6mm

6.8g1.6mm

rFeatures

Code

SP

ST

PT

Features

π

Circuit for Signal Lines

T Circuit for Signal Lines

T Circuit for Large Current

EIA

0603

0805

1206

2606 tCut-off Frequency (

NFL/NFW

Series)

Expressed by three figures. The unit is in hertz (Hz). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures.

tCapacitance (

NFE

Series)

Expressed by three figures. The unit is in pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures.

oPackaging

Code

K

L

B

D

Packaging

Embossed Taping (ø330mm Reel)

Embossed Taping (ø180mm Reel)

Bulk

Paper Taping (ø180mm Reel) yCharacteristics (

NFL/NFW

Series)

Code Characteristics

X

Cut-off Frequency yCharacteristics (

NFE

Series)

Code

B

C

Capacitance Change (Temperature Characteristics)

±

10%

±

20%,

±

22%

D

+20/-30%, +22/-33%

E

F

R

U

Z

+20/-55%, +22/-56%

+30/-80%, +22/-82%

±

15%

-750

±

120ppm/ ˚C

Other uRated Voltage

Code

1A

1C

1E

1H

2A

iElectrode

Code

3/7

4

9

Rated Voltage

10V

16V

25V

50V

100V

Electrode

Sn Plating

Lead Free Solder Coating

Others

Series

NFL

NFW

NFE

NFW31/NFE

NFW31/NFE

NFL18/NFL21/NFE

NFL18/NFL21

Series

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

95

NF

p

Chip EMIFIL

r

Part Numbering

LC Combined (2)

(Part Number)

NF

q

A

w

21

e qProduct ID

Product ID

NF

wStructure

Code

A

SL

r

207

t

X

y

1A

u

4

i

5

o

L

!0

Chip EMIFILr

Structure

Array Type eDimensions (LgW)

Code

Dimensions (LgW)

18

21

1.6g0.8mm

2.0g1.25mm

EIA

0603

0805 rFeatures (1)

Code

SL

Features

L Circuit for Signal Lines tCut-off Frequency

Expressed by three figures. The unit is in hertz (Hz). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures.

yFeatures (2)

Code

X

V

uRated Voltage

Code

1A

iNumber of Circuits

Code

4

oDimensions (T)

Code

5

8

!0Packaging

Code

B

L

Features

Expressed by a letter

Rated Voltage

10V

Number of Circuits

4 Circuits

Dimensions (T)

Low Profile

Standard

Packaging

Bulk

Embossed Taping (ø180mm Reel)

RC Combined

(Part Number)

NF

q

R

w

21

e

GD

r qProduct ID

Product ID

NF

wStructure

Code

R

A

470

t

470

y

2 L

u i

Chip EMIFILr

Structure

RC Combined Type

RC Combined Array Type eDimensions (LgW)

Code

21

31

Dimensions (LgW)

2.0g1.25mm

3.2g1.6mm

rFeatures

Code

GD

Features

EIA

0805

1206

RC Combined Type for Signal Lines iPackaging

Code

L

B

D

Packaging

Embossed Taping (ø180mm Reel)

Bulk

Paper Taping (ø180mm Reel) tCapacitance

Expressed by three figures. The unit is in pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures.

yResistance

Expressed by three-digit alphanumerics. The unit is in ohm (

).

The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "

R

". In this case, all figures are significant digits.

uElectrode/Others (

NFR

Series)

Code

2

Electrode

Sn Plating uNumber of Circuits (

NFA

pp

GD

Series)

Code Number of Circuits

4

4 Circuits

NFR

All Series

NFA

pp

GD

Series

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

96

C31E.pdf

09.4.20

NF

p

Chip EMIFIL

r

Type

Size

(Inch)

p100

Part Number

Capacitor Type

Capacitor

Array Type

Capacitor Type for Large Current

0603

p101

0805

p102

1205

p103

1806

p104

1206

p105 p106

0603

p107

0805

1205

1206

p108 p109 p110

1806

2220

p111

Series Line Up

NFM3DCC223R1H3

NFM41CC220U2A3

NFM41CC470U2A3

NFM41CC101U2A3

NFM41CC221U2A3

NFM41CC471R2A3

NFM41CC102R2A3

NFM41CC222R2A3

NFM41CC223R2A3

NFA31CC220S1E4

NFA31CC470S1E4

NFA31CC101S1E4

NFA31CC221S1E4

NFA31CC471R1E4

NFA31CC102R1E4

NFA31CC222R1E4

NFA31CC223R1C4

NFM18PS474R0J3

NFM18PS105R0J3

NFM18PC104R1C3

NFM18PC224R0J3

NFM18PC474R0J3

NFM18PC105R0J3

NFM18PC225B0J3

NFM18PC225B1A3

NFM21PC104R1E3

NFM21PC224R1C3

NFM21PC474R1C3

NFM21PC105B1A3

NFM18CC220U1C3

NFM18CC470U1C3

NFM18CC101R1C3

NFM18CC221R1C3

NFM18CC471R1C3

NFM18CC102R1C3

NFM18CC222R1C3

NFM18CC223R1C3

NFM21CC220U1H3

NFM21CC470U1H3

NFM21CC101U1H3

NFM21CC221R1H3

NFM21CC471R1H3

NFM21CC102R1H3

NFM21CC222R1H3

NFM21CC223R1H3

NFM3DCC220U1H3

NFM3DCC470U1H3

NFM3DCC101U1H3

NFM3DCC221R1H3

NFM3DCC471R1H3

NFM3DCC102R1H3

NFM3DCC222R1H3

NFM21PC105B1C3

NFM21PC225B0J3

NFM21PC475B1A3

NFM3DPC223R1H3

NFM31PC276B0J3

NFM41PC204F1H3

NFM41PC155B1E3

NFM55PC155F1H4

Capacitance

22pF+20%-20%

47pF+20%-20%

100pF+20%-20%

220pF+20%-20%

470pF+20%-20%

1000pF+20%-20%

2200pF+20%-20%

22000pF+20%-20%

22pF+20%-20%

47pF+20%-20%

100pF+20%-20%

220pF+20%-20%

470pF+20%-20%

1000pF+20%-20%

2200pF+20%-20%

22000pF+20%-20%

22pF+50%-20%

47pF+50%-20%

100pF+50%-20%

220pF+50%-20%

470pF+50%-20%

1000pF+50%-20%

2200pF+50%-20%

22000pF+50%-20%

22pF+50%-20%

47pF+50%-20%

100pF+50%-20%

220pF+50%-20%

470pF+50%-20%

1000pF+50%-20%

2200pF+50%-20%

22000pF+50%-20%

22pF+20%-20%

47pF+20%-20%

100pF+20%-20%

220pF+20%-20%

470pF+20%-20%

1000pF+20%-20%

2200pF+20%-20%

22000pF+20%-20%

0.47

µ

F+20%-20%

1.0

µ

F+20%-20%

0.1

µ

F+20%-20%

0.22

µ

F+20%-20%

0.47

µ

F+20%-20%

1.0

µ

F+20%-20%

2.2

µ

F+20%-20%

2.2

µ

F+20%-20%

0.1

µ

F+20%-20%

0.22

µ

F+20%-20%

0.47

µ

F+20%-20%

1.0

µ

F+20%-20%

1.0

µ

F+20%-20%

2.2

µ

F+20%-20%

4.7

µ

F+20%-20%

0.022

µ

F+20%-20%

27

µ

F+20%-20%

0.2

µ

F+80%-20%

1.5

µ

F+20%-20%

1.5

µ

F+80%-20%

100Vdc

100Vdc

25Vdc

25Vdc

25Vdc

25Vdc

25Vdc

25Vdc

25Vdc

16Vdc

6.3Vdc

6.3Vdc

16Vdc

6.3Vdc

6.3Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

100Vdc

100Vdc

100Vdc

100Vdc

100Vdc

100Vdc

6.3Vdc

6.3Vdc

10Vdc

25Vdc

16Vdc

16Vdc

10Vdc

16Vdc

6.3Vdc

10Vdc

50Vdc

6.3Vdc

50Vdc

25Vdc

50Vdc

Rated

Voltage

16Vdc

16Vdc

16Vdc

16Vdc

16Vdc

16Vdc

16Vdc

16Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Nominal

Cut-off

Frequency

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

300mA

300mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

2A

2A

2A

2A

2A

300mA

300mA

300mA

300mA

300mA

300mA

300mA

300mA

300mA

300mA

300mA

300mA

300mA

300mA

4A

4A

6A

2A

6A

2A

6A

2A

2A

4A

2A

2A

2A

4A

6A

Rated

Current

400mA

400mA

500mA

500mA

500mA

600mA

700mA

1000mA

700mA

700mA

700mA

700mA

1000mA

1000mA

1000mA

2000mA

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

97

NF

p

Chip EMIFIL

r

Series Line Up

Type

T Circuit Filter

Feed Through Type for Large Current

LC Combined

Multilayer Type

LC Combined

Array Type

LC Combined

Wire Wound Type

Size

(Inch)

p112

1206

p113

2706

p114

0603

p115 p116

0805

p117

0603

p119

0805

p121

1206

Part Number

NFE31PT220R1E9

NFE31PT470C1E9

NFE31PT101C1E9

NFE31PT221D1E9

NFE31PT471F1E9

NFE31PT152Z1E9

NFE31PT222Z1E9

NFE61PT330B1H9

NFE61PT680B1H9

NFE61PT101Z1H9

NFE61PT181B1H9

NFE61PT361B1H9

NFE61PT681B1H9

NFE61PT102E1H9

NFE61PT472C1H9

NFL18ST207X1C3

NFL18ST307X1C3

NFL18ST507X1C3

NFL18SP157X1A3

NFL18SP207X1A3

NFL18SP307X1A3

NFL18SP507X1A3

NFL21SP106X1C3

NFL21SP206X1C7

NFL21SP506X1C3

NFL21SP706X1C3

NFL21SP107X1C3

NFL21SP157X1C3

NFL21SP207X1C3

NFL21SP307X1C3

NFL21SP407X1C3

NFL21SP507X1C3

NFA18SL137V1A45

NFA18SL187V1A45

NFA18SL207V1A45

NFA18SL307V1A45

NFA18SL407V1A45

NFA18SL487V1A45

NFA18SL506X1A45

NFA21SL287V1A45

NFA21SL317V1A45

NFA21SL337V1A45

NFA21SL287V1A48

NFA21SL317V1A48

NFA21SL337V1A48

NFA21SL207X1A45

NFA21SL307X1A45

NFA21SL506X1A48

NFA21SL806X1A48

NFA21SL207X1A48

NFA21SL307X1A48

NFW31SP106X1E4

NFW31SP206X1E4

NFW31SP506X1E4

NFW31SP107X1E4

NFW31SP157X1E4

NFW31SP207X1E4

NFW31SP307X1E4

NFW31SP407X1E4

NFW31SP507X1E4

Capacitance

-

-

-

-

-

-

-

-

-

-

-

-

-

-

240pF+20%-20%

84pF+20%-20%

76pF+20%-20%

44pF+20%-20%

28pF+20%-20%

22pF+20%-20%

19pF+10%-10%

16pF+10%-10%

12pF+10%-10%

-

-

-

-

-

-

22pF+30%-30%

47pF+50%-20%

100pF+80%-20%

220pF+50%-20%

470pF+50%-20%

1500pF+50%-20%

2200pF+50%-50%

33pF+30%-30%

68pF+30%-30%

100pF+30%-30%

180pF+30%-30%

360pF+20%-20%

680pF+30%-30%

1000pF+80%-20%

4700pF+80%-20%

25pF+20%-20%

18pF+20%-20%

10pF+20%-20%

34pF+20%-20%

24pF+20%-20%

19pF+20%-20%

11pF+20%-20%

670pF+20%-20%

-

-

-

-

-

-

-

-

16Vdc

10Vdc

10Vdc

10Vdc

10Vdc

10Vdc

10Vdc

10Vdc

10Vdc

10Vdc

10Vdc

10Vdc

10Vdc

10Vdc

16Vdc

16Vdc

10Vdc

10Vdc

10Vdc

10Vdc

16Vdc

16Vdc

16Vdc

16Vdc

16Vdc

16Vdc

16Vdc

16Vdc

16Vdc

-

-

-

-

-

-

-

10Vdc

10Vdc

10Vdc

10Vdc

10Vdc

10Vdc

-

-

Rated

Voltage

25Vdc

25Vdc

25Vdc

25Vdc

25Vdc

25Vdc

25Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

16Vdc

500MHz

130MHz

180MHz

200MHz

300MHz

400MHz

480MHz

50MHz

280MHz

310MHz

330MHz

280MHz

310MHz

330MHz

300MHz

500MHz

150MHz

200MHz

300MHz

500MHz

10MHz

20MHz

50MHz

70MHz

100MHz

150MHz

200MHz

300MHz

400MHz

200MHz

300MHz

50MHz

80MHz

200MHz

300MHz

10MHz

20MHz

50MHz

100MHz

150MHz

200MHz

300MHz

400MHz

500MHz

Nominal

Cut-off

Frequency

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

200MHz

300mA

50mA

50mA

50mA

100mA

100mA

100mA

25mA

100mA

100mA

100mA

100mA

100mA

100mA

200mA

200mA

100mA

100mA

100mA

100mA

100mA

100mA

150mA

150mA

200mA

200mA

250mA

300mA

300mA

-

-

-

-

-

-

-

100mA

100mA

20mA

20mA

100mA

100mA

-

-

Rated

Current

6A

6A

2A

2A

2A

2A

2A

2A

150mA

6A

6A

6A

6A

6A

2A

2A

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

98

C31E.pdf

09.4.20

NF

p

Chip EMIFIL

r

Series Line Up

Type

RC Combined

Type

RC Combined

Array Type

Size

(Inch)

p123

0805

p124

1206

Part Number

NFR21GD1002202

NFR21GD1004702

NFR21GD4702202

NFR21GD4704702

NFR21GD4706802

NFR21GD4701012

NFR21GD1012202

NFR21GD1014702

NFR21GD1016802

NFR21GD1011012

NFA31GD1006R84

NFA31GD1004704

NFA31GD1001014

NFA31GD4706R84

NFA31GD4703304

NFA31GD4704704

NFA31GD4701014

NFA31GD1016R84

NFA31GD1014704

NFA31GD1011014

Rated

Voltage

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

6Vdc

6Vdc

6Vdc

6Vdc

6Vdc

6Vdc

6Vdc

6Vdc

6Vdc

6Vdc

Capacitance

10pF+20%-20%

10pF+20%-20%

47pF+20%-20%

47pF+20%-20%

47pF+20%-20%

47pF+20%-20%

100pF+20%-20%

100pF+20%-20%

100pF+20%-20%

100pF+20%-20%

10pF+20%-20%

10pF+20%-20%

10pF+20%-20%

47pF+20%-20%

47pF+20%-20%

47pF+20%-20%

47pF+20%-20%

100pF+20%-20%

100pF+20%-20%

100pF+20%-20%

Nominal

Cut-off

Frequency

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Rated

Current

50mA

35mA

25mA

50mA

20mA

15mA

50mA

20mA

20mA

50mA

35mA

30mA

25mA

50mA

35mA

30mA

15mA

50mA

20mA

15mA

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

99

NFM Series Chip EMIFIL

r

NFM18C

Series (0603 Size)

0603 size general 3-terminal capacitor.

Dimensions

0.25

±

0.1

0.4

±

0.1

0.8

±

0.1

Equivalent Circuit

(1) Input Output (3)

No polarity.

GND

(2)

(1)

1.6

±

0.1

0.2 min.

(2)

(2) 0.2

±

0.1

(3)

Rated Value (p: packaging code)

Part Number Capacitance Rated Current Rated Voltage

NFM18CC220U1C3

p

NFM18CC470U1C3

p

NFM18CC101R1C3

p

NFM18CC221R1C3

p

NFM18CC471R1C3

p

NFM18CC102R1C3

p

NFM18CC222R1C3

p

NFM18CC223R1C3

p

Number of Circuit: 1

22pF+20%-20%

47pF+20%-20%

100pF+20%-20%

220pF+20%-20%

470pF+20%-20%

1000pF+20%-20%

2200pF+20%-20%

22000pF+20%-20%

Insertion Loss Characteristics (Main Items)

(50

- 50

)

0

400mA

400mA

500mA

500mA

500mA

600mA

700mA

1000mA

16Vdc

16Vdc

16Vdc

16Vdc

16Vdc

16Vdc

16Vdc

16Vdc

: Electrode

(in mm)

Packaging

Code Packaging

D

180mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

4000

500

Refer to pages from p.126 to p.131 for mounting information.

Insulation

Resistance

(min.)

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

20

40

60

NFM18CC223R1C3

NFM18CC222R1C3

NFM18CC102R1C3

NFM18CC471R1C3

NFM18CC221R1C3

NFM18CC101R1C3

NFM18CC470U1C3

NFM18CC220U1C3

80

0.1

1 10

Frequency (MHz)

100 1000 2000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

100

C31E.pdf

09.4.20

NFM Series Chip EMIFIL

r

NFM21C

Series (0805 Size)

0805 size general 3-terminal capacitor.

Dimensions

0.3

±

0.2

Equivalent Circuit

(1) Input Output (3)

(1)

0.6

±

0.2

2.0

±

0.2

(2)

(2)

(3)

Rated Value (p: packaging code)

Part Number Capacitance Rated Current Rated Voltage

NFM21CC220U1H3

p

NFM21CC470U1H3

p

NFM21CC101U1H3

p

NFM21CC221R1H3

p

NFM21CC471R1H3

p

NFM21CC102R1H3

p

NFM21CC222R1H3

p

NFM21CC223R1H3

p

Number of Circuit: 1

22pF+20%-20%

47pF+20%-20%

100pF+20%-20%

220pF+20%-20%

470pF+20%-20%

1000pF+20%-20%

2200pF+20%-20%

22000pF+20%-20%

Insertion Loss Characteristics (Main Items)

(50

- 50

)

0

700mA

700mA

700mA

700mA

1000mA

1000mA

1000mA

2000mA

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

No polarity.

GND

(2)

1.25

±

0.1

: Electrode

(in mm)

Packaging

Code Packaging

D

180mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

4000

500

Refer to pages from p.126 to p.131 for mounting information.

Insulation

Resistance

(min.)

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

20

40

60

80

NFM21CC220U1H3

NFM21CC470U1H3

NFM21CC101U1H3

NFM21CC221R1H3

NFM21CC471R1H3

100

1 10

NFM21CC223R1H3

NFM21CC222R1H3

NFM21CC102R1H3

100

Frequency (MHz)

1000 2000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

101

NFM Series Chip EMIFIL

r

NFM3DC

Series (1205 Size)

1205 size general 3-terminal capacitor.

DimensionsEquivalent Circuit

(1) Input Output (3)

1.1

±

0.3

3.2

±

0.2

(2)

1.25

±

0.2

GND

(2)

No polarity.

(1)

(2)

(3)

0.3

±

0.2

: Electrode

(in mm)

Packaging

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 4000

B

Bulk(Bag) 500

Refer to pages from p.126 to p.131 for mounting information.

Rated Value (p: packaging code)

Part Number Capacitance

NFM3DCC220U1H3

p

NFM3DCC470U1H3

p

NFM3DCC101U1H3

p

NFM3DCC221R1H3

p

NFM3DCC471R1H3

p

NFM3DCC102R1H3

p

NFM3DCC222R1H3

p

NFM3DCC223R1H3

p

Number of Circuit: 1

22pF+50%-20%

47pF+50%-20%

100pF+50%-20%

220pF+50%-20%

470pF+50%-20%

1000pF+50%-20%

2200pF+50%-20%

22000pF+50%-20%

Insertion Loss Characteristics (Main Items)

(50

- 50

)

0

Rated Current

300mA

300mA

300mA

300mA

300mA

300mA

300mA

300mA

Rated Voltage

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

Insulation

Resistance

(min.)

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

20

40

60

80

NFM3DCC223R1H3

NFM3DCC222R1H3

NFM3DCC102R1H3

NFM3DCC471R1H3

NFM3DCC221R1H3

NFM3DCC101UH3

NFM3DCC470U1H3

NFM3DCC220U1H3

100

1 10 100

Frequency (MHz)

1000 2000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

102

C31E.pdf

09.4.20

NFM Series Chip EMIFIL

r

NFM41C

Series (1806 Size)

1806 size general 3-terminal capacitor.

DimensionsEquivalent Circuit

(1) Input Output (3)

1.5

±

0.3

4.5

±

0.3

(2)

1.6

±

0.3

GND

(2)

No polarity.

(1)

+0.3 –0.2

(2)

0.4

±

0.3

(3)

: Electrode

(in mm)

Packaging

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 4000

B

Bulk(Bag) 500

Refer to pages from p.126 to p.131 for mounting information.

Rated Value (p: packaging code)

Part Number Capacitance

NFM41CC220U2A3

p

NFM41CC470U2A3

p

NFM41CC101U2A3

p

NFM41CC221U2A3

p

NFM41CC471R2A3

p

NFM41CC102R2A3

p

NFM41CC222R2A3

p

NFM41CC223R2A3

p

Number of Circuit: 1

22pF+50%-20%

47pF+50%-20%

100pF+50%-20%

220pF+50%-20%

470pF+50%-20%

1000pF+50%-20%

2200pF+50%-20%

22000pF+50%-20%

Insertion Loss Characteristics (Main Items)

(50

- 50

)

0

Rated Current

300mA

300mA

300mA

300mA

300mA

300mA

300mA

300mA

Rated Voltage

100Vdc

100Vdc

100Vdc

100Vdc

100Vdc

100Vdc

100Vdc

100Vdc

Insulation

Resistance

(min.)

10000M ohm

10000M ohm

10000M ohm

10000M ohm

10000M ohm

10000M ohm

10000M ohm

10000M ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

20

40

NFM41CC223R2A3

NFM41CC222R2A3

NFM41CC102R2A3

60

NFM41CC471R2A3

NFM41CC221U2A3

NFM41CC101U2A3

80

NFM41CC470U2A3

NFM41CC220U2A3

100

1 10 100

Frequency (MHz)

1000 2000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

103

NFA Series Chip EMIFIL

r

NFA31C

Series (1206 Size)

4-lines chip 3-terminal capacitor array, 1206 size.

Dimensions

0.8

±

0.1

3.2

±

0.2

Equivalent Circuit

Input

(7) (8) (9) (10)

1.6

±

0.2

GND (1) (2) GND

Rated Value (p: packaging code)

(1)

0.4

±

0.2

(7) (8) (9) (10)

(3) (4) (5) (6)

(2)

0.05 min.

1.1

±

0.5

: Electrode

(in mm)

(3) (4) (5)

Packaging

Output

No polarity.

(6)

Code Packaging

D

180mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

4000

100

Refer to pages from p.126 to p.131 for mounting information.

Part Number Capacitance

40

60

NFA31CC223R1C4

NFA31CC222R1E4

NFA31CC102R1E4

NFA31CC471R1E4

NFA31CC221S1E4

NFA31CC101S1E4

80

Rated Current Rated Voltage

NFA31CC220S1E4

p

NFA31CC470S1E4

p

NFA31CC101S1E4

p

NFA31CC221S1E4

p

NFA31CC471R1E4

p

NFA31CC102R1E4

p

NFA31CC222R1E4

p

NFA31CC223R1C4

p

Number of Circuit: 4

22pF+20%-20%

47pF+20%-20%

100pF+20%-20%

220pF+20%-20%

470pF+20%-20%

1000pF+20%-20%

2200pF+20%-20%

22000pF+20%-20%

Insertion Loss Characteristics (Main Items)

(50

- 50

)

0

NFA31CC470S1E4

NFA31CC220S1E4

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

20

25Vdc

25Vdc

25Vdc

25Vdc

25Vdc

25Vdc

25Vdc

16Vdc

Insulation

Resistance

(min.)

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

Operating

Temperature Range

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

100

1 10 100

Frequency (MHz)

1000 2000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

104

C31E.pdf

09.4.20

NFM Series Chip EMIFIL

r

NFM18PS

Series (0603 Size)

3-terminal capacitor for power lines whose ground impedance has reduced.

20

40

60

80

100

0.1

Dimensions

(1)

+0.2 –0.1

(2)

0.2 min.

(2)

1.6

±

0.1

0.15

+0.2

–0.1

(3)

Equivalent Circuit

(1) Input

GND

(2)

Output (3)

No polarity.

0.8

+0.2

–0.1

0.4

±

0.1

Rated Value (p: packaging code)

Part Number Capacitance Rated Current Rated Voltage

NFM18PS474R0J3

p

NFM18PS105R0J3

p

Number of Circuit: 1

0.47

µ

F+20%-20%

1.0

µ

F+20%-20%

Insertion Loss Characteristics (Main Items)

(50

- 50

)

0

2A

2A

6.3Vdc

6.3Vdc

: Electrode

(in mm)

Packaging

Code Packaging

D

180mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

4000

500

Refer to pages from p.126 to p.131 for mounting information.

Insulation

Resistance

(min.)

1000M ohm

500M ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +105

°

C

1

NFM18PS474R0J3

NFM18PS105R0J3

10

Frequency (MHz)

100 1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

105

NFM Series Chip EMIFIL

r

NFM18PC

Series (0603 Size)

4A max, 0603 size chip 3-terminal capacitor for power lines.

NFM18PC (0.1 to 0.47

µ

F, 2.2

µ

F-6.3V)

Dimensions

0.25

±

0.1

0.4

±

0.1

0.8

±

0.1

Equivalent Circuit

(1) Input Output (3)

No polarity.

GND

(2)

1.6

±

0.1

0.2 min.

(2)

(1)

(2) 0.2

±

0.1

(3)

: Electrode

(in mm)

Packaging

Code Packaging

D

180mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

4000

500

NFM18PC (1

µ

F, 2.2

µ

F-10V)

Dimensions

0.2 min. 0.2 min.

(2)

(1) (3)

0.25

±

0.1

(2)

0.4

±

0.1

1.6

±

0.1

0.25

±

0.1

0.8

±

0.1

Equivalent Circuit

(1) Input

GND

(2)

Output (3)

No polarity.

Rated Value (p: packaging code)

Part Number Capacitance Rated Current Rated Voltage

NFM18PC104R1C3

p

NFM18PC224R0J3

p

NFM18PC474R0J3

p

NFM18PC105R0J3

p

NFM18PC225B0J3

p

NFM18PC225B1A3

p

Number of Circuit: 1

0.1

µ

F+20%-20%

0.22

µ

F+20%-20%

0.47

µ

F+20%-20%

1.0

µ

F+20%-20%

2.2

µ

F+20%-20%

2.2

µ

F+20%-20%

Insertion Loss Characteristics (Main Items)

(50

- 50

)

0

2A

2A

2A

2A

2A

4A

16Vdc

6.3Vdc

6.3Vdc

6.3Vdc

6.3Vdc

10Vdc

20

NFM18PC104R1C3

NFM18PC224R0J3

NFM18PC474R0J3

40

: Electrode

(in mm)

Packaging

Code Packaging

D

180mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

4000

500

Refer to pages from p.126 to p.131 for mounting information.

Insulation

Resistance

(min.)

1000M ohm

1000M ohm

1000M ohm

500M ohm

200M ohm

200M ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +105

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

60

80

NFM18PC105R0J3

NFM18PC225B0J3 (6.3V)

NFM18PC225B1A3 (10V)

100

0.1

1 10

Frequency (MHz)

100 1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

106

C31E.pdf

09.4.20

NFM Series Chip EMIFIL

r

NFM21P

Series (0805 Size)

6A max, 0805 size chip 3-terminal capacitor for power lines.

Dimensions

0.3

±

0.2

0.4

±

0.2

Equivalent Circuit

(1) Input Output (3)

No polarity.

0.6

±

0.2

2.0

±

0.2

(2)

1.25

±

0.1

GND

(2)

(1)

(2)

(3)

Rated Value (p: packaging code)

Part Number Capacitance Rated Current Rated Voltage

NFM21PC104R1E3

p

NFM21PC224R1C3

p

NFM21PC474R1C3

p

NFM21PC105B1A3

p

NFM21PC105B1C3

p

NFM21PC225B0J3

p

NFM21PC475B1A3

p

Number of Circuit: 1

0.1

µ

F+20%-20%

0.22

µ

F+20%-20%

0.47

µ

F+20%-20%

1.0

µ

F+20%-20%

1.0

µ

F+20%-20%

2.2

µ

F+20%-20%

4.7

µ

F+20%-20%

Insertion Loss Characteristics (Main Items)

(50

- 50

)

0

20

NFM21PC104R1E3

NFM21PC224R1C3

NFM21PC474R1C3

NFM21PC105B1A3 (10V)

NFM21PC105B1C3 (16V)

40

4A

4A

4A

6A

2A

2A

2A

25Vdc

16Vdc

16Vdc

10Vdc

16Vdc

6.3Vdc

10Vdc

: Electrode

(in mm)

Packaging

Code Packaging

D

180mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

4000

500

Refer to pages from p.126 to p.131 for mounting information.

Insulation

Resistance

(min.)

1000M ohm

1000M ohm

1000M ohm

500M ohm

500M ohm

200M ohm

100M ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

60

NFM21PC225B0J3

NFM21PC475B1A3

80

100

0.1

1 10

Frequency (MHz)

100 1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

107

NFM Series Chip EMIFIL

r

NFM3DP

Series (1205 Size)

1205 size 3-terminal capacitor for power lines.

DimensionsEquivalent Circuit

(1) Input Output (3)

1.1

±

0.3

3.2

±

0.2

(2)

1.25

±

0.2

GND

(2)

No polarity.

(1)

(2)

(3)

0.3

±

0.2

: Electrode

(in mm)

Packaging

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 4000

B

Bulk(Bag) 500

Refer to pages from p.126 to p.131 for mounting information.

Rated Value (p: packaging code)

Part Number Capacitance Rated Current Rated Voltage

NFM3DPC223R1H3

p

Number of Circuit: 1

0.022

µ

F+20%-20%

Insertion Loss Characteristics (Main Items)

(50

- 50

)

0

2A

20

40

NFM3DPC223R1H3

50Vdc

Notice (Rating)

Insulation

Resistance

(min.)

1000M ohm

Operating

Temperature Range

-55

°

C to +125

°

C

When NFM3DP series is used in operating temperatures exceeding +85

°

C, derating of current is necessary.

Please apply the derating curve shown in chart according to the operating temperature.

60

2.0

80

100

0.1

1 10

Frequency (MHz)

100 1000 3000

0.5

0

-55 85

Operating Temperature (˚C)

125

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

108

C31E.pdf

09.4.20

NFM Series Chip EMIFIL

r

NFM31P

Series (1206 Size)

6A/27microF, 1206 size chip 3-terminal capacitor for power lines.

Dimensions

0.4

±

0.3

1.1

±

0.3

0.4

±

0.3

1.6

±

0.2

Equivalent Circuit

(1) Input Output (3)

20

40

60

80

100

0.1

No polarity.

(1)

3.2

±

0.2

(2)

(2)

(3)

0.3

±

0.2

Rated Value (p: packaging code)

Part Number Capacitance Rated Current Rated Voltage

NFM31PC276B0J3

p

Number of Circuit: 1

27

µ

F+20%-20%

Insertion Loss Characteristics (Main Items)

(50

- 50

)

0

6A 6.3Vdc

GND

(2)

: Electrode

(in mm)

Packaging

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 3000

B

Bulk(Bag) 500

Refer to pages from p.126 to p.131 for mounting information.

Insulation

Resistance

(min.)

20M ohm

Operating

Temperature Range

-40

°

C to +85

°

C

1

NFM31PC276B0J3

10

Frequency (MHz)

100 1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

109

NFM Series Chip EMIFIL

r

NFM41P

Series (1806 Size)

6A max, 1806 size chip 3-terminal capacitor for power lines.

Dimensions

0.4

±

0.3

1.5

±

0.3

1.6

±

0.3

Equivalent Circuit

(1) Input Output (3)

20

40

60

80

No polarity.

(1)

4.5

±

0.3

0.7 min.

(2)

(2)

0.3

+0.3

–0.2

(3)

Rated Value (p: packaging code)

Part Number Capacitance Rated Current Rated Voltage

NFM41PC204F1H3

p

NFM41PC155B1E3

p

Number of Circuit: 1

0.2

µ

F+80%-20%

1.5

µ

F+20%-20%

Insertion Loss Characteristics (Main Items)

(50

- 50

)

0

2A

6A

50Vdc

25Vdc

GND

(2)

: Electrode

(in mm)

Packaging

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 4000

B

Bulk(Bag) 500

Refer to pages from p.126 to p.131 for mounting information.

Insulation

Resistance

(min.)

1000M ohm

300M ohm

Operating

Temperature Range

-55

°

C to +85

°

C

-55

°

C to +85

°

C

100

1 10

NFM41PC204F1H3

NFM41PC155B1E3

100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

110

C31E.pdf

09.4.20

NFM Series Chip EMIFIL

r

NFM55P

Series (2220 Size)

50V/6A/1.5microF, large capacitance chip 3-terminal capacitor.

DimensionsEquivalent Circuit

(1) Input Output (3)

1.7

+0.3

–0.2

5.7

±

0.3

(2)

4.7

+0.5

–0.3

5.0

±

0.3

GND

(2)

No polarity.

(1)

(2)

(3)

Rated Value (p: packaging code)

Part Number Capacitance Rated Current Rated Voltage

NFM55PC155F1H4

p

Number of Circuit: 1

1.5

µ

F+80%-20%

Insertion Loss Characteristics (Main Items)

(50

- 50

)

0

6A 50Vdc

: Electrode

(in mm)

Packaging

Code Packaging

L

180mm Reel Embossed Tape

B

Bulk(Bag)

Minimum

Quantity

500

100

Refer to pages from p.126 to p.131 for mounting information.

Insulation

Resistance

(min.)

100M ohm

Operating

Temperature Range

-55

°

C to +85

°

C

20

NFM55PC155F1H4

40

60

80

100

0.1

1 10

Frequency (MHz)

100 1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

111

NFE Series Chip EMIFIL

r

NFE31P

Series (1206 Size)

Meet 6A, T-type filter with built-in ferrite bead.

Dimensions

0.7

±

0.2

(1)

1.0

±

0.2

(2)

0.7

±

0.2

(3)

Equivalent Circuit

Input

(1)

Output

(3)

3.2

±

0.35

Rated Value (p: packaging code)

Part Number Capacitance Rated Current Rated Voltage

NFE31PT220R1E9

p

NFE31PT470C1E9

p

NFE31PT101C1E9

p

NFE31PT221D1E9

p

NFE31PT471F1E9

p

NFE31PT152Z1E9

p

NFE31PT222Z1E9

p

Number of Circuit: 1

22pF+30%-30%

47pF+50%-20%

100pF+80%-20%

220pF+50%-20%

470pF+50%-20%

1500pF+50%-20%

2200pF+50%-50%

Insertion Loss Characteristics (Main Items)

(50

- 50

)

0

NFE31PT220R1E9

NFE31PT470C1E9

10

20

30

NFE31PT101C1E9

NFE31PT221D1E9

NFE31PT471F1E9

NFE31PT152Z1E9

NFE31PT222Z1E9

40

6A

6A

6A

6A

6A

6A

6A

25Vdc

25Vdc

25Vdc

25Vdc

25Vdc

25Vdc

25Vdc

50

1.6

±

0.15

: Electrode

(in mm)

GND

(2)

No polarity.

Packaging

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 2000

K

330mm Reel Embossed Tape 8000

B

Bulk(Bag) 500

Refer to pages from p.126 to p.131 for mounting information.

Insulation

Resistance

(min.)

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

Operating

Temperature Range

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

60

1 10 100

Frequency (MHz)

1000 2000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

112

C31E.pdf

09.4.20

NFE Series Chip EMIFIL

r

NFE61P

Series (2706 Size)

T-type filter with built-in ferrite bead.

Dimensions

0.7

±

0.2

2.6

±

0.3

(1) (2)

0.7

±

0.2

(3)

Equivalent Circuit

Input

(1)

Output

(3)

6.8

±

0.5

Rated Value (p: packaging code)

Part Number Capacitance Rated Current Rated Voltage

NFE61PT330B1H9

p

NFE61PT680B1H9

p

NFE61PT101Z1H9

p

NFE61PT181B1H9

p

NFE61PT361B1H9

p

NFE61PT681B1H9

p

NFE61PT102E1H9

p

NFE61PT472C1H9

p

Number of Circuit: 1

33pF+30%-30%

68pF+30%-30%

100pF+30%-30%

180pF+30%-30%

360pF+20%-20%

680pF+30%-30%

1000pF+80%-20%

4700pF+80%-20%

Insertion Loss Characteristics (Main Items)

(50

- 50

)

0

NFE61PT330B1H9

10

NFE61PT680B1H9

NFE61PT101Z1H9

2A

2A

2A

2A

2A

2A

2A

2A

20

30

40

NFE61PT181B1H9

NFE61PT361B1H9

NFE61PT681B1H9

NFE61PT102E1H9

NFE61PT472C1H9

50

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

60

0.1

1 10

Frequency (MHz)

100 1000 2000

1.6

±

0.3

: Electrode

(in mm)

GND

(2)

No polarity.

Packaging

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 2500

K

330mm Reel Embossed Tape 8000

B

Bulk(Bag) 500

Refer to pages from p.126 to p.131 for mounting information.

Insulation

Resistance

(min.)

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

Operating

Temperature Range

-25

°

C to +85

°

C

-25

°

C to +85

°

C

-25

°

C to +85

°

C

-25

°

C to +85

°

C

-25

°

C to +85

°

C

-25

°

C to +85

°

C

-25

°

C to +85

°

C

-25

°

C to +85

°

C

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

113

NFL Series Chip EMIFIL

r

NFL18ST

Series (0603 Size)

T-type LC filter. Reduce waveform distortion of high speed signal.

Dimensions

0.2 min. 0.2 min.

(2)

(1) (3)

0.25

±

0.1

(2)

0.4

±

0.1

1.6

±

0.1

0.25

±

0.1

0.8

±

0.1

Equivalent Circuit

Input

(1)

Output

(3)

Packaging

GND

(2)

No Polarity.

Code Packaging

D

180mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

4000

1000

: Electrode

(in mm)

Refer to pages from p.126 to p.131 for mounting information.

Rated Value (p: packaging code)

Part Number

Nominal

Cut-off Frequency

Capacitance Inductance

NFL18ST207X1C3

p

NFL18ST307X1C3

p

NFL18ST507X1C3

p

Number of Circuits: 1

200MHz

300MHz

500MHz

25pF+20%-20% 110nH+20%-20%

18pF+20%-20% 62nH+20%-20%

10pF+20%-20% 43nH+20%-20%

Insertion Loss Characteristics (Main Items)

(50

- 50

)

0

Rated Voltage Rated Current

16Vdc

16Vdc

16Vdc

150mA

200mA

200mA

Insulation

Resistance

(min.)

1000M ohm

1000M ohm

1000M ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

20

NFL18ST507X1C3

NFL18ST307X1C3

NFL18ST207X1C3

40

60

80

1 10 100

Frequency (MHz)

1000 5000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

114

C31E.pdf

09.4.20

NFL Series Chip EMIFIL

r

NFL18SP

Series (0603 Size)

PI-type LC filter. Reduce waveform distortion of high speed signal.

Dimensions

0.15

±

0.1

(2)

(1) (3)

Equivalent Circuit

(1) Input Output (3)

(1) (3)

(2)

1.6

±

0.1

0.2 min.

GND

(2)

No polarity.

Packaging

Code Packaging

D

180mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

4000

1000

0.3

±

0.1

0.4

±

0.1

0.3

±

0.1

0.15

±

0.1

0.15

±

0.1

: Electrode

(in mm)

Refer to pages from p.126 to p.131 for mounting information.

Rated Value (p: packaging code)

Part Number

Nominal

Cut-off Frequency

Capacitance Inductance

NFL18SP157X1A3

p

NFL18SP207X1A3

p

NFL18SP307X1A3

p

NFL18SP507X1A3

p

Number of Circuits: 1

150MHz

200MHz

300MHz

500MHz

34pF+20%-20% 100nH+20%-20%

24pF+20%-20% 80nH+20%-20%

19pF+20%-20% 60nH+20%-20%

11pF+20%-20% 38nH+20%-20%

Insertion Loss Characteristics (Main Items)

(50

- 50

)

0

Rated Voltage Rated Current

10Vdc

10Vdc

10Vdc

10Vdc

100mA

100mA

100mA

100mA

20

NFL18SP157X1A3

NFL18SP207X1A3

NFL18SP307X1A3

NFL18SP507X1A3

40

Insulation

Resistance

(min.)

1000M ohm

1000M ohm

1000M ohm

1000M ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

60

80

1 10 100

Frequency (MHz)

1000 2000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

115

NFL Series Chip EMIFIL

r

NFL21SP

Series (0805 Size)

PI-type LC filter. Reduce waveform distortion of high speed signal.

Dimensions

0.3

±

0.2

0.4

±

0.2

Equivalent Circuit

(1) Input Output (3)

(1)

0.6

±

0.2

2.0

±

0.2

(2)

(2)

0.25

±

0.2

(3)

GND

(2)

No polarity.

Packaging

Code Packaging

D

180mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

4000

1000

: Electrode

(in mm)

Refer to pages from p.126 to p.131 for mounting information.

Rated Value (p: packaging code)

Part Number

Nominal

Cut-off Frequency

Capacitance Inductance

NFL21SP106X1C3

p

NFL21SP206X1C7

p

NFL21SP506X1C3

p

NFL21SP706X1C3

p

NFL21SP107X1C3

p

NFL21SP157X1C3

p

NFL21SP207X1C3

p

NFL21SP307X1C3

p

NFL21SP407X1C3

p

NFL21SP507X1C3

p

Number of Circuits: 1

10MHz

20MHz

50MHz

70MHz

100MHz

150MHz

200MHz

300MHz

400MHz

500MHz

670pF+20%-20% 680nH+20%-20%

240pF+20%-20% 700nH+20%-20%

84pF+20%-20% 305nH+20%-20%

76pF+20%-20% 185nH+20%-20%

44pF+20%-20% 135nH+20%-20%

28pF+20%-20% 128nH+20%-20%

22pF+20%-20% 72nH+20%-20%

19pF+10%-10% 45nH+10%-10%

16pF+10%-10% 34nH+10%-10%

12pF+10%-10% 31nH+10%-10%

Insertion Loss Characteristics (Main Items)

(50

- 50

)

0

Rated Voltage Rated Current

16Vdc

16Vdc

16Vdc

16Vdc

16Vdc

16Vdc

16Vdc

16Vdc

16Vdc

16Vdc

100mA

100mA

150mA

150mA

200mA

200mA

250mA

300mA

300mA

300mA

Insulation

Resistance

(min.)

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

Operating

Temperature Range

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

-55

°

C to +125

°

C

20

40

60

NFL21SP106X1C3

NFL21SP206X1C7

NFL21SP506X1C3

NFL21SP706X1C3

NFL21SP107X1C3

NFL21SP157X1C3

NFL21SP207X1C3

NFL21SP307X1C3

NFL21SP407X1C3

NFL21SP507X1C3

80

1 10 100

Frequency (MHz)

1000 2000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

116

C31E.pdf

09.4.20

NFA Series Chip EMIFIL

r

NFA18SL

Series (0603 Size)

L-type LC filter 4-lines array for mobile phones.

NFA18SL 137/187/207 V1A45

NFA18SL506X1A45

Dimensions

(Top View)

1.6

±

0.1

(3) (4) (5) (6)

(1) GND

GND (2)

0.15

±

0.1

(Side View)

(7) (8)

0.2

±

0.1

Polarity Marking

0.4

±

0.05

(9) (10)

(3)(4)(5)(6): IN (OUT)

(7)(8)(9)(10): OUT (IN)

0.25

±

0.1

+0.05 –0.1

(Bottom View)

0.2

±

0.1

: Electrode

(in mm)

Equivalent Circuit

(3)(4)(5)(6): IN (OUT)

(7)(8)(9)(10): OUT (IN)

(3) (4) (5) (6)

GND (1) (2) GND

(7) (8) (9) (10)

*Please change IN/OUT according to the circuit condition.

Packaging

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 4000

B

Bulk(Bag) 1000

NFA18SL 307/407/487 V1A45

Dimensions

(Top View)

(3)

1.6

±

0.1

(4) (5) (6)

GND (1) (2) GND

(3)(4)(5)(6) : IN (OUT)

(7)(8)(9)(10) : OUT (IN)

(7) (8) (9) (10)

Polarity Marking

(Side View)

Equivalent Circuit

GND (1)

(3) (4) (5)

(3)(4)(5)(6): IN (OUT)

(7)(8)(9)(10): OUT (IN)

(6)

(2) GND

40

(Bottom View)

0.2

±

0.1

0.4

±

0.05

0.20

±

0.1

0.25

±

0.1

: Electrode

(in mm)

Refer to pages from p.126 to p.131 for mounting information.

Rated Value (p: packaging code)

Part Number

NFA18SL137V1A45

p

NFA18SL187V1A45

p

NFA18SL207V1A45

NFA18SL307V1A45

p p

Nominal

Cut-off Frequency

130MHz

180MHz

200MHz

300MHz

Insertion Loss

(Cut-off Frequency)

6dBmax

6dBmax

6dBmax

6dBmax

Insertion Loss at 470MHz

(min.)

25dB

20dB

15dB

-

Insertion Loss at 800MHz

(min.)

-

-

-

20dB

Insertion Loss at 900MHz

(min.)

25dB

20dB

15dB

20dB

Rated

Voltage

10Vdc

10Vdc

10Vdc

10Vdc

Rated

Current

Insulation

Resistance

(min.)

Withstand

Voltage

50mA 1000M ohm 30Vdc

50mA 1000M ohm 30Vdc

50mA 1000M ohm 30Vdc

100mA 1000M ohm 30Vdc

NFA18SL407V1A45

p 400MHz 6dBmax 18dB 18dB 10Vdc 100mA 1000M ohm 30Vdc

NFA18SL487V1A45

p 480MHz 6dBmax 15dB 15dB 10Vdc 100mA 1000M ohm 30Vdc

Operating Temperature Range: -40

°

C to +85

°

C (NFA18SL 137/187/207 V1A45), -55

°

C to +125

°

C (NFA18SL 307/407/487 V1A45) Number of Circuits: 4

Insertion Loss Characteristics (Main Items)

NFA18SL 137/187/207 V1A45

0

(50

- 50

)

NFA18SL207V1A45

20

NFA18SL137V1A45

NFA18SL 307/407/487 V1A45

0

NFA18SL307V1A45

NFA18SL407V1A45

NFA18SL487V1A45

20

(50

- 50

)

NFA18SL187V1A45

40

(7) (8) (9) (10)

*Please change IN/OUT according to the circuit condition.

Packaging

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 4000

B

Bulk(Bag) 1000

60

60

80

10 100

Frequency (MHz)

1000 3000

80

10 100

Frequency (MHz)

1000 3000

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

117

NFA Series Chip EMIFIL

r

NFA18SL Series (0603 Size)

Rated Value (p: packaging code)

Part Number

Nominal

Cut-off Frequency

Insertion Loss

(Cut-off Frequency)

NFA18SL506X1A45

p

50MHz 6dBmax

Operating Temperature Range: -40

°

C to +85

°

C Number of Circuits: 4

Insertion Loss Characteristics (Main Items)

NFA18SL_X

0

(50

- 50

)

Insertion Loss at 500MHz

(min.)

30dB

Insertion Loss at 1000MHz

(min.)

25dB

NFA18SL506X1A45

20

Rated

Voltage

10Vdc

Rated

Current

Insulation

Resistance

(min.)

Withstand

Voltage

25mA 1000M ohm 30Vdc

40

60

80

10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

118

C31E.pdf

09.4.20

NFA Series Chip EMIFIL

r

NFA21SL

Series (0805 Size)

L-type LC filter 4-lines array for mobile phones.

Dimensions

(Top View)

2.0

±

0.1

(3) (4) (5) (6)

Polarity

Marking

(1) GND

(7) (8) (9) (10)

0.2

±

0.15

0.25

±

0.1

0.15 min.

GND (2)

0.25

±

0.1

(3)(4)(5)(6): IN (OUT)

(7)(8)(9)(10): OUT (IN)

Equivalent Circuit

(1) GND

(3)

(7)

(4)

(8)

(5)

(9)

(6)

(10)

GND (2)

(Bottom View)

0.5

±

0.05

Part Number

NFA21SL

ppp

X1A45

p

NFA21SL

ppp

V1A45

p

NFA21SL

ppp

X1A48

p

NFA21SL

ppp

V1A48

p

0.5

T

±

0.1

0.85

±

0.1

: Electrode

(in mm)

Packaging

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 4000

B

Bulk(Bag) 1000

Refer to pages from p.126 to p.131 for mounting information.

Rated Value (p: packaging code)

Part Number

Nominal

Cut-off Frequency

Insertion Loss

(Cut-off Frequency)

NFA21SL287V1A45

NFA21SL317V1A45

p p

280MHz

310MHz

330MHz

6dBmax

6dBmax

6dBmax

NFA21SL337V1A45

p

NFA21SL287V1A48

NFA21SL317V1A48

p p

280MHz

310MHz

6dBmax

6dBmax

NFA21SL337V1A48

p 330MHz 6dBmax

Operating Temperature Range: -55

°

C to +125

°

C Number of Circuits: 4

Insertion Loss Characteristics (Main Items)

NFA21SL_V1A45

0

(50

- 50

)

NFA21SL287V1A45

NFA21SL317V1A45

NFA21SL337V1A45

20

Insertion Loss at 800MHz

(min.)

25dB

20dB

15dB

25dB

20dB

20dB

NFA21SL_V1A48

0

20

Insertion Loss at 900MHz

(min.)

25dB

20dB

15dB

25dB

20dB

20dB

Rated Voltage Rated Current

10Vdc

10Vdc

10Vdc

10Vdc

10Vdc

10Vdc

100mA

100mA

100mA

100mA

100mA

100mA

Insulation

Resistance

(min.)

Withstand

Voltage

1000M ohm 30Vdc

1000M ohm 30Vdc

1000M ohm 30Vdc

1000M ohm 30Vdc

1000M ohm 30Vdc

1000M ohm 30Vdc

NFA21SL287V1A48

NFA21SL317V1A48

(50

- 50

)

NFA21SL337V1A48

40 40

60

60

80

10 100

Frequency (MHz)

1000 3000

80

10 100

Frequency (MHz)

1000 3000

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

119

NFA Series Chip EMIFIL

r

NFA21SL Series (0805 Size)

Rated Value (p: packaging code)

Part Number

Nominal

Cut-off Frequency

Insertion Loss

(Cut-off Frequency)

NFA21SL207X1A45

p

NFA21SL307X1A45

p

NFA21SL506X1A48

p

NFA21SL806X1A48

p

200MHz

300MHz

50MHz

80MHz

2 to 7

2 to 7

0 to 6

2 to 7

NFA21SL207X1A48

p 200MHz 2 to 7

NFA21SL307X1A48

p 300MHz 2 to 7

Operating Temperature Range: -55

°

C to +125

°

C Number of Circuits: 4

Insertion Loss Characteristics (Main Items)

NFA21SL_X

0

(50

- 50

)

20

NFA21SL506X1A48

NFA21SL806X1A48

NFA21SL207X1A45(48)

NFA21SL307X1A45(48)

Insertion Loss at 500MHz

(min.)

13dB

7dB

30dB

25dB

13dB

7dB

Insertion Loss at 800MHz

(min.)

25dB

20dB

-

-

25dB

20dB

Insertion Loss at 1000MHz

(min.)

25dB

25dB

20dB

25dB

25dB

25dB

Rated

Voltage

Rated

Current

Insulation

Resistance

(min.)

Withstand

Voltage

10Vdc 100mA 1000M ohm 30Vdc

10Vdc 100mA 1000M ohm 30Vdc

10Vdc

10Vdc

20mA 1000M ohm 30Vdc

20mA 1000M ohm 30Vdc

10Vdc 100mA 1000M ohm 30Vdc

10Vdc 100mA 1000M ohm 30Vdc

40

60

80

1 10 100

Frequency (MHz)

1000 3000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

120

C31E.pdf

09.4.20

NFW Series Chip EMIFIL

r

NFW31S

Series (1206 Size)

Wire-wound PI-type LC filter.

Dimensions

2.3

±

0.2

Equivalent Circuit

(1) Input Output (3)

3.2

±

0.3

(1) (2)

(3)

0.7

±

0.3

0.65

±

0.2

0.7

±

0.3

1.6

±

0.2

(1): Input electrode

(2): Ground electrode

(3): Output electrode

* No polarity.

: Electrode

(in mm)

GND

(2)

No polarity.

Packaging

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 2000

K

330mm Reel Embossed Tape 7500

Refer to pages from p.126 to p.131 for mounting information.

Rated Value (p: packaging code)

Part Number

Nominal

Cut-off Frequency

Insertion Loss at 10MHz

Insertion Loss at 20MHz

Insertion Loss at 50MHz

Insertion Loss at 100MHz

Insertion Loss at 150MHz

Insertion Loss at 200MHz

Insertion Loss at 300MHz

Insertion Loss at 400MHz

Insertion Loss at 500MHz

Insertion Loss at 1000MHz

NFW31SP106X1E4

NFW31SP206X1E4

p p

10MHz

20MHz

50MHz

6dBmax.

5dBmin. 25dBmin. 25dBmin.

6dBmax.

5dBmin. 25dBmin.

6dBmax. 10dBmin.

-

-

-

25dBmin.

25dBmin.

30dBmin.

-

-

-

-

-

-

30dBmin. 30dBmin.

30dBmin. 30dBmin.

30dBmin. 30dBmin.

NFW31SP506X1E4

p

NFW31SP107X1E4

NFW31SP157X1E4

p p

100MHz

150MHz

200MHz

-

-

-

-

-

-

-

-

-

6dBmax.

-

-

-

6dBmax.

-

5dBmin.

-

6dBmax.

20dBmin. 30dBmin.

10dBmin. 20dBmin 30dBmin. 30dBmin.

10dBmin. 30dBmin.

NFW31SP207X1E4

p

NFW31SP307X1E4

NFW31SP407X1E4

p p

300MHz

400MHz

-

-

-

-

-

-

-

-

-

-

NFW31SP507X1E4

p 500MHz -

Rated Current: 200mA Rated Voltage: 25Vdc Operating Temperature Range: -40

°

C to +85

°

C Number of Circuit: 1

-

-

-

6dBmax.

-

-

-

6dBmax.

-

5dBmin. 15dBmin.

10dBmin.

6dBmax. 10dBmin.

Insertion Loss Characteristics (Main Items)

(50

- 50

)

0

20

40

60

NFW31SP157X1E4

NFW31SP207X1E4

NFW31SP307X1E4

NFW31SP407X1E4

NFW31SP507X1E4

NFW31SP106X1E4

NFW31SP206X1E4

NFW31SP506X1E4

NFW31SP107X1E4

80

1 10 100

Frequency (MHz)

1000 2000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

121

EMI

Suppression

Effect

NFW31 Series

Example of EMI Suppression in an Actual Circuit

Type of Filter

Signal Waveform and Noise Spectrum before Filter Mounting

Measuring Circuit

74ALS04

EMI

Suppression Filter

Measuring

Point

74ALS00

10MHz

Signal Wave Form

(

20ns/div

1V/div

)

/ EMI Suppression Effect / Description

(

1V/div

)

100

80

60

40

20

0

100 200 300 400 500

Frequency (MHz)

Noise Spectrum

(10:1 Active Probe)

NFW31S Series

(Cut-off frequency 50MHz)

100

80

60

40

20

0

Level before

filter mounting

100 200 300 400 500

Frequency (MHz)

NFW31S's steep attenuation characteristic means excellent EMI suppression without waveform cornering.

Conventional Chip

Solid Type EMI Filter

( NFM41CC 470pF)

100

80

60

40

20

0

Level before

filter mounting

100 200 300 400 500

Frequency (MHz)

3-terminal capacitors suppress signal frequencies as EMI frequencies so the signal waveform is distorted.

Filter Combined with Conventional LCs

L L

C

L: Chip Inductor

C: Chip Capacitor

(270pF)

100

80

60

40

20

0

Level before

filter mounting

100 200 300 400 500

Frequency (MHz)

Combinations of inductors and capacitors can yield a steep attenuation characteristic, but they require a great deal more mounting space.

Moreover, at high frequencies the

EMI suppression is less than that obtained by NFW31S.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

122

C31E.pdf

09.4.20

NFR Series Chip EMIFIL

r

NFR21G

Series (0805 Size)

3-terminal RC filter, damp the noise current and return back to ground.

Dimensions

(Top View)

Equivalent Circuit

(1) Input Output (3)

1.0 max.

(Bottom View)

(1)

1.0

±

0.35

2.0

±

0.2

(2)

(2)

+0.2 –0.25

(3)

0.3

+0.2

–0.25

GND

(2)

No polarity

0.95

±

0.35

1.25

±

0.2

: Electrode

(in mm)

Packaging

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 4000

B

Bulk(Bag) 500

Refer to pages from p.126 to p.131 for mounting information.

Rated Value (p: packaging code)

Part Number Capacitance Resistance

NFR21GD1002202

p

NFR21GD1004702

p

NFR21GD4702202

p

NFR21GD4704702

p

NFR21GD4706802

p

NFR21GD4701012

p

NFR21GD1012202

p

NFR21GD1014702

p

NFR21GD1016802

p

NFR21GD1011012

p

Number of Circuit: 1

10pF+20%-20%

10pF+20%-20%

47pF+20%-20%

22ohm+30%-30%

47ohm+30%-30%

22ohm+30%-30%

47pF+20%-20%

47pF+20%-20%

47ohm+30%-30%

68ohm+30%-30%

47pF+20%-20% 100ohm+30%-30%

100pF+20%-20% 22ohm+30%-30%

100pF+20%-20% 47ohm+30%-30%

100pF+20%-20% 68ohm+30%-30%

100pF+20%-20% 100ohm+30%-30%

Insertion Loss Characteristics (Main Items)

(50

- 50

)

0

0

Rated Current Rated Voltage

50mA

35mA

50mA

35mA

30mA

25mA

50mA

35mA

30mA

25mA

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

Insulation

Resistance

(min.)

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

(50

- 50

)

NFR21GD4701012

Operating

Temperature Range

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

10

10

20

30

NFR21GD1002202

NFR21GD1004702

NFR21GD4702202

NFR21GD4704702

NFR21GD4706802

NFR21GD1012202

NFR21GD1014702

NFR21GD1016802

20

30

NFR21GD1011012

40

40

50

1 10

Frequency (MHz)

100 1000

50

1 10

Frequency (MHz)

100 1000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

123

NFA Series Chip EMIFIL

r

NFA31G

Series (1206 Size)

3-terminal RC filter array.

10

20

30

40

Rated Value (p: packaging code)

Dimensions

(Top View)

(7) (8) (9) (10)

Equivalent Circuit

(7) (8)

Input

(9) (10)

(1)

(3) (4)

0.4

±

0.15

(5) (6)

0.8

±

0.1

(2)

(Bottom View)

0.05 min.

3.2

±

0.2

(1)GND (2)GND

1.1

±

0.5

1.6

±

0.2

0.05 min.

: Electrode

(in mm)

Code

D

B

(3)

Packaging

(4) (5)

Output

No polarity.

Packaging

180mm Reel Paper Tape

Bulk(Bag)

(6)

Minimum

Quantity

4000

100

Refer to pages from p.126 to p.131 for mounting information.

Part Number Capacitance Resistance

NFA31GD1006R84

p

10pF+20%-20% 6.8ohm+40%-40%

NFA31GD1004704

p 10pF+20%-20% 47ohm+30%-30%

NFA31GD1001014

p 10pF+20%-20% 100ohm+30%-30%

NFA31GD4706R84

p

47pF+20%-20% 6.8ohm+40%-40%

NFA31GD4703304

p 47pF+20%-20% 33ohm+30%-30%

NFA31GD4704704

p 47pF+20%-20% 47ohm+30%-30%

NFA31GD4701014

p

47pF+20%-20% 100ohm+30%-30%

NFA31GD1016R84

p 100pF+20%-20% 6.8ohm+40%-40%

NFA31GD1014704

p 100pF+20%-20% 47ohm+30%-30%

NFA31GD1011014

p 100pF+20%-20% 100ohm+30%-30%

Number of Circuit: 4

Insertion Loss Characteristics (Main Items)

(50

- 50

)

0

Rated

Current

50mA

20mA

15mA

50mA

20mA

20mA

15mA

50mA

20mA

15mA

0

Rated

Voltage

6Vdc

6Vdc

6Vdc

6Vdc

6Vdc

6Vdc

6Vdc

6Vdc

6Vdc

6Vdc

Insulation

Resistance

(min.)

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

1000M ohm

Operating

Temperature Range

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

-40

°

C to +85

°

C

(50

- 50

)

NFA31GD1006R84

NFA31GD4706R84

NFA31GD1016R84

10

20

30

40

NFA31GD1004704

NFA31GD4704704

NFA31GD1014704

10

20

30

40

50

1

0

10 100

Frequency (MHz)

NFA31GD1001014

NFA31GD4701014

NFA31GD1011014

1000 2000

(50

- 50

)

10

20

30

40

50

1

0

10 100

Frequency (MHz)

NFA31GD4703304

1000 2000

(50

- 50

)

50

1 10 100

Frequency (MHz)

1000 2000

50

1 10 100

Frequency (MHz)

1000 2000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

124

C31E.pdf

09.4.20

Chip EMIFIL

r

!

Caution/Notice

!Caution

Rating

Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance.

Soldering and Mounting

• Self-heating

Please provide special attention when mounting chip

EMIFIL r

NFM_P series in close proximity to other products that radiate heat.

The heat generated by other products may deteriorate the insulation resistance and cause excessive heat in this component.

Storage and Operating Conditions

<Operating Environment>

Do not use products in a chemical atmosphere such as chlorine gas, acid or sulfide gas.

Do not use products in the environment close to the organic solvent.

<Storage and Handling Requirements>

1. Storage Period

NFM55P series should be used within 6 months, the other series should be used within 12 months.

Solderability should be checked if this period is exceeded.

2. Storage Conditions

(1) Storage temperature: -10 to +40˚C

Relative humidity: 30 to 70%

Avoid sudden changes in temperature and humidity.

(2) Do not store products in a chemical atmosphere

such as chlorine gas, acid or sulfide gas.

Notice (Soldering and Mounting)

1. Cleaning

Failure and degradation of a product are caused by the cleaning method. When you clean in conditions that are not in mounting information, please contact

Murata engineering.

2. Soldering

Reliability decreases with improper soldering methods.

Please solder by the standard soldering conditions shown in mounting information.

3. Other

Noise suppression levels resulting from Murata's EMI suppression filters EMIFIL r may vary, depending on the circuits and ICs used, type of noise, mounting pattern, mounting location, and other operating conditions. Be sure to check and confirm in advance the noise suppression effect of each filter, in actual circuits, etc. before applying the filter in a commercialpurpose equipment design.

Notice

Handling

1. Resin Coating

Using resin for coating/molding products may affect the products performance.

So please pay careful attention in selecting resin.

Prior to use, please make the reliability evaluation with the product mounted in your application set.

2. Caution for Use (NFW Series)

When you hold products with a tweezer, please hold by the sides. Sharp materials, such as a pair of tweezers, should not touch the winding portion to prevent breaking the wire. Mechanical shock should not be applied to the products mounted on the board to prevent breaking the core.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

125

NF

p

Chip EMIFIL

r

1. Standard Land Pattern Dimensions

Soldering and Mounting

NF p

series suppress noise by conducting the high-frequency noise element to ground. Therefore, to obtain maximum performance from these filters, the ground pattern should be made as large as possible during the PCB design stage. As shown below, one side of the PCB is used for chip mounting, and the other is used for grounding.

Small diameter feedthrough holes are then used to connect the grounds on each side of the PCB. This reduces the highfrequency impedance of the grounding and maximizes the filter's performance.

Land Pattern

+ Solder Resist

Land Pattern

Solder Resist

(in mm)

NFM18

NFL18

NFM55P

Reflow Soldering

NFM18C/NFM18PC/

NFL18ST

NFM18PS NFL18SP NFM55P

Small diameter thru hole

ø1.0-ø2.0

Small diameter thru hole

ø0.2-ø0.3

Small diameter thru hole

ø0.2

Small diameter thru hole

ø0.2-ø0.3

Chip

0.8

0.8

0.4

0.6

1.0

2.2

0.05

0.8

1.2

2.0

1.0

2.0

0.4

1.5

2.0

4.7

6.7

NFM21

NFM3D

NFM31P

NFM41

NFR21G

NFL21S

• NF p 18, NFM55P are specially adapted for reflow soldering.

o Reflow Soldering Chip mounting side

NFM21C/NFR21G

NFM21P/NFL21S

Small diameter thru hole ø0.4

NFM3DC/NFM3DP/

NFM31P

NFM41C/NFM41P

Small diameter thru hole ø0.4

Please contact us if using thinner land pad than 18

µ m.

o Flow Soldering

Chip mounting side

Small diameter thru hole ø0.4

a c d a b c d

Part Number a b c

Size (mm) d e f g

NFM21C/NFR21G

NFM21P/NFL21S

NFM3DC/NFM3DP

NFM31P

NFM41C/NFM41P

0.6

1.0

1.0

1.5

-

1.4

1.4

2.0

1.4

2.5

2.5

3.5

2.6

4.4

4.4

6.0

• NF p

21 is specially adapted for reflow soldering.

0.8

1.9

2.3

1.0

1.2

1.2

2.0

2.6

2.6

2.4

3.0

3.0

a b c d

Part Number a b

NFM3DC

NFM3DP

NFM31P

NFM41C

NFM41P

1.0

1.0

1.5

1.4

1.4

2.0

c

Size (mm)

2.5

2.5

3.5

d e f g

4.4

1.0

2.0

2.4

4.4

6.0

1.2

1.2

2.6

2.6

3.0

3.0

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

126

C31E.pdf

09.4.20

NFA18S

NFA21S

NFA31G

NFA31C

NFW31S

NFE31P

NFE61P

Reflow Soldering NFA18S

0.175

0.05

1.375

0.225

0.4

NF

p

Chip EMIFIL

r

Soldering and Mounting

Land Pattern

+ Solder Resist

Land Pattern

Solder Resist

NFA21S

(in mm)

Small diameter thru hole ø0.2

0.25

2.5

0.25

0.5

1.3

2.0

2.35

o Reflow Soldering NFA31G/31C

2.6

Filled via

ø0.1

ø0.4

1.5

o Reflow and Flow NFW31S o

Reflow Soldering NFE31P

Small diameter thru hole ø0.4

R0.1 to R0.2 is preferred to obtain high voltage withstanding

0.3

0.8 Pitch

3.8

4.2

o Reflow Soldering

Small diameter thru hole ø0.4

0.6

1.2

2.2

4.2

o Flow Soldering

Small diameter thru hole ø0.4

2.0

4.8

8.8

1.5

3.8

4.8

9.0

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

127

NF

p

Chip EMIFIL

r

Soldering and Mounting

2. Solder Paste Printing and Adhesive Application

When reflow soldering the chip EMI suppression filter, the printing must be conducted in accordance with the following cream solder printing conditions.

If too much solder is applied, the chip will be prone to damage by mechanical and thermal stress from the PCB and may crack.

Standard land dimensions should be used for resist and copper foil patterns.

Series

NFM

NFR

NFL

Solder Paste Printing

o

Guideline of solder paste thickness:

100-150

µ m: NFM18/21/3D/31P, NFR, NFL

150-200

µ m: NFM55P

100-200

µ m: NFM41

NFM18C/18PC

NFL18ST

NFL18SP

When flow soldering the EMI suppression filter, apply the adhesive in accordance with the following conditions.

If too much adhesive is applied, then it may overflow into the land or termination areas and yield poor solderability.

In contrast, if insufficient adhesive is applied, or if the adhesive is not sufficiently hardened, then the chip may become detached during flow soldering process.

(in mm)

Adhesive Application

NFM3D/31P/41 Series

Apply 0.1mg for NFM41C/41 and 0.06mg for

NFM3D/NFM31P of bonding agent at each chip.

Do not cover electrodes.

0.4

1.0

2.2

NFM18PS

0.4

1.0

2.0

NFM21C/21P

NFR21G/NFL21S

Bonding agent

Coating position of bonding agent

0.05

0.8

1.2

2.0

NFM3DC/3DP

0.6

1.4

2.6

NFM31P

1.0

2.5

3.9

NFM41C/41P

1.0

2.5

4.4

NFM55P

1.5

3.5

5.5

1.5

4.7

6.7

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

128

C31E.pdf

09.4.20

NF

p

Chip EMIFIL

r

Soldering and Mounting

(in mm)

Adhesive Application Series

NFA

Solder Paste Printing

o Guideline of solder paste thickness:

100-200

µ m: NFA31G/31C

100-150

µ m: NFA18S/21S

NFA31G/31C

2.6

0.6

0.3

NFA21S

0.5

1.5

0.5

0.8 Pitch

NFW31S

NFE31P

0.25

0.25

NFA18S

0.175

1.375

0.4

0.05

0.225

1.3

2.0

o

Guideline of solder paste thickness:

150-200

µ m

NFE61P

0.6

2.2

4.2

o Guideline of solder paste thickness:

150-200

µ m

1.5

4.8

8.8

NFW31S Series

Apply 0.2mg of bonding agent at each chip.

Bonding agent Coating positon of bonding agent

Apply 1.0mg of bonding agent at each chip.

Bonding agent

1.5

4.8

9.0

Bonding agent

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

129

NF

p

Chip EMIFIL

r

Soldering and Mounting

3. Standard Soldering Conditions

(1) Soldering Methods

Use flow and reflow soldering methods only.

Use standard soldering conditions when soldering chip

EMI suppression filters.

In cases where several different parts are soldered, each having different soldering conditions, use those conditions requiring the least heat and minimum time.

Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based solder will deteriorate performance of products.

If using NFM series with Sn-Zn based solder, please contact Murata in advance.

(2) Soldering Profile o Flow Soldering Profile

(Sn-3.0Ag-0.5Cu Solder)

T3

T2

T1 t2

Heating

Flux: o o o

Use Rosin-based flux.

In case of using RA type solder, products should be cleaned completely with no residual flux.

Do not use strong acidic flux (with chlorine content exceeding 0.20wt%)

Do not use water-soluble flux.

For additional mounting methods, please contact Murata.

Limit Profile

Standard Profile

Series

NFM3DC/3DP/31PC

NFM41C/41P

NFE61P

NFW31S

Pre-heating t1

Time (s)

Pre-heating

Temp. (T1) Time. (t1)

Standard Profile

Heating

Temp. (T2) Time. (t2)

Cycle of Flow

Limit Profile

Heating

Temp. (T3) Time. (t2)

150

150

°

°

C

C

60s min.

60s min.

250

250

°

°

C

C

4 to 6s

4 to 6s

2 times max.

2 times max.

265

265

±

±

3

3

°

°

C

C

5s max.

5s max.

Cycle of Flow

2 times max.

1 time o Reflow Soldering Profile

(Sn-3.0Ag-0.5Cu Solder)

Series

NFA, NFE

NFL, NFM ( Except NFM55P)

NFR

NFW31S, NFM55P

T2

T1

T4

T3

180

150

Pre-heating t1 t2

Limit Profile

Standard Profile

90s

±

30s Time (s)

Heating

Temp. (T1)

Standard Profile

Time. (t1)

Peak

Temperature

(T2)

Cycle of Reflow

Heating

Temp. (T3)

Limit Profile

Time. (t2)

Peak

Temperature

(T4)

Cycle of Reflow

220

220

°

°

C min.

C min.

30 to 60s

30 to 60s

245

245

±

±

3

3

°

°

C

C

2 times max.

2 times max.

230

230

°

°

C min.

C min.

60s max.

60s max.

260

260

°

°

C/10s

C/10s

2 times max.

1 time

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

130

C31E.pdf

09.4.20

NF

p

Chip EMIFIL

r

Soldering and Mounting

(3) Reworking with Solder Iron

The following conditions must be strictly followed when using a soldering iron.

Pre-heating: 150

°

C 60s min.* 1

*

1

NFM55P: 100

°

C/60s+200

°

C/60s

Soldering iron power output / Tip diameter:

30W max. / ø3mm max.

Temperature of soldering iron tip / Soldering time / Times:

*

350

°

C max. / 3-4s / 2 times*

2

2

NFE31PT152Z1E9: 280

°

C max. / 10s max. / 2 times

4. Cleaning

Following conditions should be observed when cleaning chip EMI filter.

(1) Cleaning Temperature: 60

°

C max. (40

°

C max. for alcohol type cleaner)

(2) Ultrasonic

Output: 20W/liter max.

Duration: 5 minutes max.

Frequency: 28 to 40kHz

(3) Cleaning Agent

The following list of cleaning agents have been tested on the individual components. Evaluation of final assembly should be completed prior to production.

Do not allow the tip of the soldering iron to directly contact the chip.

For additional methods of reworking with a soldering iron, please contact Murata engineering.

(a) Alcohol cleaning agent

Isopropyl alcohol (IPA)

(b) Aqueous cleaning agent

Pine Alpha ST-100S

(4) Ensure that flux residue is completely removed.

Component should be thoroughly dried after aqueous agent has been removed with deionized water.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

131

NF

p

Chip EMIFIL

r

Packaging

Minimum Quantity and Dimensions of 8mm Width Paper / Embossed Tape

2.0

±

0.05

4.0

±

0.1

4.0

±

0.1

ø1.5

+0.1

-0

<Embossed> c d

<Paper>

Direction of Feed b

NFA18S, NFA21S_48 only.

NFA18S: ø0.8

±

0.1, NFA21S_48: ø1.0

+0.3

-0 c: Depth of Cavity

(Embossed Tape) c c: Total Thickness of Tape

(Paper Tape)

Part Number a

NFM18C/

NFM18PC (Except 105R/225B1A)/

NFM18PS

NFM18PC105R/225B1A

NFL18SP

NFL18ST

NFL21SP

NFM21

NFM3DC/3DP

NFM31P

NFA18S

NFA21S_45

NFA21S_48

NFA31G/31C

NFE31P

NFR21G

NFW31S

1.85

1.85

2.3

2.3

3.4

3.5

1.8

2.30

2.25

3.5

3.6

2.3

3.6

b

Cavity Size

1.05

1.05

1.55

1.55

1.4

1.9

1.0

1.55

1.45

2.0

1.8

1.55

1.9

c

0.9 max.

1.1 max.

0.9 max.

1.1 max.

1.1 max.

1.1 max.

0.85

1.5

0.7

0.7

1.05

1.1 max.

1.85

0.7

2.0

d

-

-

-

-

0.2

0.25

0.25

0.25

0.25

-

0.2

0.25

0.2

Minimum Qty. (pcs.)

ø180mm Reel ø330mm Reel

Paper Tape Embossed Tape Paper Tape Embossed Tape

Bulk

4000

4000

4000

4000

-

4000

-

-

-

-

-

-

-

-

-

-

-

4000

3000

4000

4000

4000

-

2000

4000

2000

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

8000

-

-

-

-

-

7500

500

500

1000

500

500

500

1000

1000

1000

100

500

500

-

(in mm)

Minimum Quantity and Dimensions of 12mm Width Embossed Tape

4.0

±

2.0

±

0.05

0.1

4.0

±

0.1

ø1.5

+0.1

-0

0.3

c

Part Number

NFM41

NFE61

Cavity Size a

4.8

7.2

b

1.8

1.9

Minimum Qty. (pcs.) c

1.1

1.75

ø180mm Reel ø330mm Reel

4000

2500

-

8000

Bulk

500

500 b

2.0

±

0.05

8.0

±

0.1

4.0

±

0.1

ø1.5

Direction of Feed c: Depth of Cavity

+0.1

-0

0.3

c

Part Number

NFM55P

Cavity Size a b c

6.0

5.3

2.5

Minimum Qty. (pcs.)

ø180mm Reel ø330mm Reel

500 -

Bulk

100 b

Direction of Feed

ø1.7

±

0.1

c: Depth of Cavity

(in mm)

"Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity".

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

132

C31E.pdf

09.4.20

NF

p

Chip EMIFIL

r

Design Kits

o

EKEMNFMCB (Chip EMIFILr Capacitor Type for Signal Lines)

No.

13

14

15

16

9

10

11

12

7

8

5

6

3

4

1

2

Part Number

NFM18CC220U1C3

NFM18CC470U1C3

NFM18CC101R1C3

NFM18CC221R1C3

NFM18CC471R1C3

NFM18CC102R1C3

NFM18CC222R1C3

NFM18CC223R1C3

NFM21CC220U1H3

NFM21CC470U1H3

NFM21CC101U1H3

NFM21CC221R1H3

NFM21CC471R1H3

NFM21CC102R1H3

NFM21CC222R1H3

NFM21CC223R1H3

Quantity

(pcs.)

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

Capacitance

22pF

±

20%

47pF

±

20%

47pF

±

20%

100pF

±

20%

220pF

±

20%

470pF

±

20%

1000pF

±

20%

2200pF

±

20%

22000pF

±

20%

22pF

±

20%

100pF

±

20%

220pF

±

20%

470pF

±

20%

1000pF

±

20%

2200pF

±

20%

22000pF

±

20%

Rated Voltage

(Vdc)

50

50

50

50

50

16

50

50

50

16

16

16

16

16

16

16

Rated Current

(mA)

700

700

700

700

1000

1000

1000

2000

400

400

500

500

500

600

700

1000

Insulation Resistance

(M

min.)

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000 o EKEMFA31D (Chip EMIFILr Capacitor Array Type/ RC Combined Array Type)

No.

13

14

15

16

9

10

11

12

17

18

6

7

4

5

8

1

2

3

Part Number

NFA31CC220S1E4

NFA31CC470S1E4

NFA31CC101S1E4

NFA31CC221S1E4

NFA31CC471R1E4

NFA31CC102R1E4

NFA31CC222R1E4

NFA31CC223R1C4

NFA31GD1006R84

NFA31GD1004704

NFA31GD1001014

NFA31GD4706R84

NFA31GD4703304

NFA31GD4704704

NFA31GD4701014

NFA31GD1016R84

NFA31GD1014704

NFA31GD1011014

Quantity

(pcs.)

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

Capacitance

22pF

±

20%

47pF

±

20%

100pF

±

20%

220pF

±

20%

470pF

±

20%

1000pF

±

20%

2200pF

±

20%

22000pF

±

20%

10pF

±

20%

10pF

±

20%

10pF

±

20%

47pF

±

20%

47pF

±

20%

47pF

±

20%

47pF

±

20%

100pF

±

20%

100pF

±

20%

100pF

±

20%

Rated Voltage

(Vdc)

6

6

6

6

6

6

6

6

6

6

25

25

25

16

25

25

25

25

Rated Current

(mA)

20

20

15

50

50

20

15

50

20

15

200

200

200

200

200

200

200

200

Insulation Resistance

(M

min.)

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

12

13

14

15

8

9

10

11

16

17

6

7

4

5

1

2

3 o EKEMFL18E (Chip EMIFILr LC Combined Type)

No.

Part Number

NFL18ST207X1C3

NFL18ST307X1C3

NFL18ST507X1C3

NFL18SP157X1A3

NFL18SP207X1A3

NFL18SP307X1A3

NFL18SP507X1A3

NFL21SP106X1C3

NFL21SP206X1C7

NFL21SP506X1C3

NFL21SP706X1C3

NFL21SP107X1C3

NFL21SP157X1C3

NFL21SP207X1C3

NFL21SP307X1C3

NFL21SP407X1C3

NFL21SP507X1C3

Quantity

(pcs.)

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

Cut-off Frequency

Rated Voltage

(Vdc)

200MHz

300MHz

500MHz

150MHz

200MHz

300MHz

500MHz

10MHz

20MHz

50MHz

70MHz

100MHz

150MHz

200MHz

300MHz

400MHz

500MHz

16

16

16

10

10

10

10

16

16

16

16

16

16

16

16

16

16

Rated Current

(mA)

Insulation Resistance

(M

min.)

DC Resistance

(

) max.

100

100

150

150

200

200

250

300

300

300

150

200

200

100

100

100

100

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

Continued on the following page.

2.0

2.0

1.5

1.2

8.5

8.5

3.5

3.0

1.2

1.2

3.5

1.8

1.5

3.0

3.0

3.0

2.0

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

133

NF

p

Chip EMIFIL

r

Design Kits

22

23

24

25

26

18

19

20

21

No.

Continued from the preceding page.

Part Number

NFW31SP106X1E4

NFW31SP206X1E4

NFW31SP506X1E4

NFW31SP107X1E4

NFW31SP157X1E4

NFW31SP207X1E4

NFW31SP307X1E4

NFW31SP407X1E4

NFW31SP507X1E4

Quantity

(pcs.)

Cut-off

Frequency

10

10

10

10

10

10

10

10

10

10MHz

20MHz

50MHz

100MHz

150MHz

200MHz

300MHz

400MHz

500MHz

10MHz

6dB max.

-

-

-

-

-

-

-

-

20MHz

5

6dB max.

-

-

-

-

-

-

-

Attenuation (dB min.)

50MHz 100MHz 150MHz 200MHz 300MHz 400MHz 500MHz

25

5

25

25

-

-

25

25

-

-

-

-

30

30

6dB max.

-

-

-

10

6dB max.

-

-

-

-

6dB max.

-

30

5

-

6dB max.

-

-

10

-

-

-

20

-

30

20

30

10

-

-

-

-

-

-

-

-

-

-

-

-

6dB max.

-

-

-

6dB max.

-

5

-

6dB max.

1GHz

30

30

30

30

30

30

15

10

10

Rated

Current

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

200mA

Rated

Voltage

25V

25V

25V

25V

25V

25V

25V

25V

25V

13

14

15

16

9

10

11

12

17

18

19

20

21

7

8

5

6

3

4

1

2 o

EKEMFA20F (Chip EMIFILr LC Combined Array Type)

No.

Part Number

NFA18SL506X1A45

NFA18SL137V1A45

NFA18SL187V1A45

NFA18SL207V1A45

NFA18SL307V1A45

NFA18SL407V1A45

NFA18SL487V1A45

NFA18SD187X1A45

NFA18SD207X1A45

NFA21SL506X1A48

NFA21SL806X1A48

NFA21SL207X1A45

NFA21SL207X1A48

NFA21SL307X1A45

NFA21SL307X1A48

NFA21SL287V1A45

NFA21SL287V1A48

NFA21SL317V1A45

NFA21SL317V1A48

NFA21SL337V1A45

NFA21SL337V1A48

Quantity

(pcs.)

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

Cut-off Frequency

50MHz

130MHz

180MHz

200MHz

300MHz

400MHz

480MHz

180MHz

200MHz

200MHz

80MHz

200MHz

200MHz

300MHz

300MHz

280MHz

280MHz

310MHz

310MHz

330MHz

330MHz o EKEMNFMPH (Chip EMIFILr for Large Current)

No.

13

14

15

16

9

10

11

12

7

8

5

6

3

4

1

2

17

18

19

20

21

22

Part Number

NFM18PC104R1C3

NFM18PC224R0J3

NFM18PC474R0J3

NFM18PC105R0J3

NFM18PC225B0J3

NFM18PC225B1A3

NFM18PS474R0J3

NFM18PS105R0J3

NFM21PC104R1E3

NFM21PC224R1C3

NFM21PC474R1C3

NFM21PC105B1A3

NFM21PC105B1C3

NFM21PC225B0J3

NFM21PC475B1A3

NFE31PC276B0J3

NFE31PT152Z1E9

NFE31PT222Z1E9

NFE61PT102E1H9

NFE61PT472C1H9

NFM41PC204F1H3

NFM41PC155B1E3

Quantity

(pcs.)

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

Capacitance

0.1

µ

F

±

20%

0.22

µ

F

±

20%

0.47

µ

F

±

20%

1

µ

F

±

20%

2.2

µ

F

±

20%

2.2

µ

F

±

20%

0.47

µ

F

±

20%

1

µ

F

±

20%

0.1

µ

F

±

20%

0.22

µ

F

±

20%

0.47

µ

F

±

20%

1

µ

F

±

20%

1

µ

F

±

20%

2.2

µ

F

±

20%

4.7

µ

F

±

20%

27

µ

F

±

20%

1500pF +50/-20%

2200pF

±

50%

1000pF +80/-20%

4700pF +80/-20%

0.2

µ

F +80/-20%

1.5

µ

F

±

20%

Rated Voltage

(Vdc)

16

6.3

10

6.3

25

16

16

10

6.3

10

6.3

6.3

16

6.3

6.3

6.3

25

25

50

50

50

25

Rated Voltage

(Vdc)

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

Rated Current

(A)

6

6

4

4

2

4

2

2

2

2

2

4

2

2

2

2

2

2

6

6

2

6

Rated Current

(mA)

25

25

20

100

100

100

100

100

100

100

100

100

100

100

100

100

25

25

50

50

50

Insulation Resistance

(M

min.)

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

Insulation Resistance

(M

min.)

1000

1000

1000

500

500

200

100

20

1000

1000

1000

500

200

200

1000

500

1000

1000

1000

1000

1000

300

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

134

C31E.pdf

09.4.20

DL

Chip Common Mode Choke Coil

Series Introduction

Part Numbering

Series Line Up

Product Detail

!Caution/Notice

Soldering and Mounting

Packaging

Design Kits

154

155

159

160

136

138

139

140

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

135

DL

p

Series Introduction

Common Mode Current

Differential Mode Current

Magnetic flux by common mode current is added each other and create impedance

Magnetic flux by differential mode current is canceled each other and do not create impedance

Category

Features,

Classification

Structure

Ultra high cut-off frequency for high speed differential signal lines

Film type

Wound type

High cut-off frequency

High Coupling for high speed differential signal lines

High cut-off frequency for high speed differential signal lines

Film type

Wound type for general differential signal lines

Film type

Large current

High coupling for power lines

Relative high differential mode impedance

Low coupling for audio lines

Wound type

Multilayer type

Part Number

Comments

DLP11SA

DLW21SN_HQ2

DLP0NS

DLP11SN

DLP2AD

DLW21SN_SQ2

DLW31S

DLW21H

DLP31S

DLP31D

Low profile, small size, suitable for mobile equipments.

Tight terminal pitch enables high density layout.

Ultra high cut-off frequency and its matching to line impedance enables good transmission of high speed signal.

Ultra high self resonance frequency enables high cutoff frequency.

Its matching to line impedance enables good transmission of high speed signal.

Low profile, small size, suitable for mobile equipments.

Tight terminal pitch enables high density layout.

High cut-off frequency enables good transmission of high speed signal.

Ultra high self resonance frequency enables high cutoff frequency. DLW21H is designed as low profile type.

Low profile,small size, suitable for mobile equipments.

Tight terminal pitch enables high density layout.

DLW5AH

DLW5BS

DLW5BT

Large current (6A max.) , suitable for input connector from an AC adaptor.

DLW5BT is low profile type.

DLM11G

DLM2HG

Modified its differential mode impedance higher than other common mode choke coils, this feature makes possible to suppress both common mode and differential mode noise. DLM2HG can meet stereo

3 lines which contain a ground line.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

136

C31E.pdf

09.4.20

Noise

Suppression

Example

DLP/DLW Series

Skew Improve Effect of Common Mode Choke Coil

Example of Skew Improvement by Common Mode Choke Coil

(Test using pulse generator waveform)

Waveform is equivalent to 1000Mbps signal

Waveform with intentionally made skew (skew: 100ps) Skew is improved by common mode choke coil

Mechanism of Skew Improvement

Waveform rises (or falls)

Current change generates magnetic flux on a ferrite core

Electromotive force is generated on another line

This electromotive force works to

decrease the delay of waveform

Noise Suppression of Common Mode Choke Coil in HDMI Line

Device under test / Transmitter : game machine Receiver : projector

Cable / HDMI categoly2 3m cable

Test resolution / 1080p Deep color 12bit (Data 1.11GHz) DVD play mode

60

55

50

45

40

35

30

25

Without filter

DLW21SN900HQ2

20

1000 1500 2000 2500 3000 3500 4000 4500 5000

Frequency (MHz)

60

55

50

45

40

35

30

25

Without filter

DLP11SA900HL2

20

1000 1500 2000 2500 3000 3500 4000 4500 5000

Frequency (MHz)

Test Example of HDMI1.3

Waveform Transmission

~Using ESD protection device 0.05pF~

Signal frequency : 1.11GHz (Deep color 12bit)

ESD protection device only with film type DLP11SN900HL2

(Cut-off frequency is most low in the table below)

Specification satisfied

Video signal generator

CLOCK

Wound Type

DLW21SN900HQ2

Film Type

DLP11SA900HL2

Film Type Array

DLP2ADN900HL4

DATA common mode choke coil ESD protection device 0.05pF

Cut-off Frequency

Judge

Over 10GHz

Specification satisfied

Transition Time

Rise time: 83.4ps

Fall time: 77.4ps

Around 6GHz

Specification satisfied

Rise time: 90.4ps

Fall time: 85.5ps

Each of common mode choke coil can keep waveform, satisfy the specification.

Around 4GHz

Specification satisfied

Rise time: 100ps

Fall time: 97.4ps

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

137

DL

p

Chip Common Mode Choke Coil

Part Numbering

(Part Number)

DL

q

W

w

21

e

S

r

N

t

371

y

S

u

Q

i

2 L

o !0

qProduct ID

Product ID

DL

wStructure

Code

W

M

P

Chip Common Mode Choke Coils

Structure

Wire Wound Type

Multilayer Type

Film Type eDimensions (LgW)

Code

0N

11

21

31

2A

2H

5A

5B

Dimensions (LgW)

0.85g0.65mm

1.25g1.0mm

2.0g1.2mm

3.2g1.6mm

2.0g1.0mm

2.5g2.0mm

5.0g3.6mm

5.0g5.0mm

rFeatures (1)

Code

S

D

H

G

T

Type

Magnetically Shielded One Circuit Type

Magnetically Shielded Two Circuit Type

Open Magnetic One Circuit Type

Magnetically Monolithic Type (sectional winding)

Magnetically Shielded One Circuit Low Profile Type

!0Packaging

Code

K

L

B

Packaging

Embossed Taping (ø330mm Reel)

Embossed Taping (ø180mm Reel)

Bulk

EIA

03025

0504

0805

1206

0804

1008

2014

2020 tCategory

Code

A

N

R

Category

Expressed by a letter.

yImpedance

Typical impedance at 100MHz is expressed by three figures. The unit is in ohm (

). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures.

uCircuit

Code

S

M

H

Circuit

Expressed by a letter.

iFeatures (2)

Code

L

Q

Z

Features

Expressed by a letter.

oNumber of Signal Lines

Code

2

3

4

Number of Signal Lines

Two Lines

Three Lines

Four Lines

Series

DLW5AH/DLW5BS/DLW5BT

All Series

All Series

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

138

C31E.pdf

09.4.20

DL

p

Chip Common Mode Choke Coil

Type

Multilayer Type for Audio Lines

Size

(Inch)

0504

1008

p140 p141 p142

Part Number

Film Type for Differential

Signal Lines

Film Array Type for Differential

Signal Lines

Wire Wound Type for Differential

Signal Lines

Wire Wound Type for Large Current

03025

0504

1206

0804

1206

0805

1206

2014

p143 p145 p146 p147 p148 p150 p151 p152 p152

2020

p153

DLP2ADN201HL4

DLP2ADN241HL4

DLP2ADN281HL4

DLP31DN900ML4

DLP31DN131ML4

DLP31DN201ML4

DLP31DN321ML4

DLP31DN441ML4

DLW21SN670SQ2

DLW21SN900SQ2

DLW21SN121SQ2

DLW21SN181SQ2

DLW21SN261SQ2

DLW21SN371SQ2

DLW21SN670HQ2

DLW21SN900HQ2

DLW21SN121HQ2

DLW21SR670HQ2

DLW21HN670SQ2

DLW21HN900SQ2

DLW21HN121SQ2

DLW21HN181SQ2

DLW31SN900SQ2

DLW31SN161SQ2

DLW31SN261SQ2

DLW31SN601SQ2

DLW31SN102SQ2

DLW31SN222SQ2

DLW5AHN402SQ2

DLM11GN601SZ2

DLM2HGN601SZ3

DLP0NSN670HL2

DLP0NSN900HL2

DLP0NSN121HL2

DLP11SN670SL2

DLP11SN121SL2

DLP11SN161SL2

DLP11SN900HL2

DLP11SN201HL2

DLP11SN241HL2

DLP11SN281HL2

DLP11SN331HL2

DLP11SA350HL2

DLP11SA670HL2

DLP11SA900HL2

DLP31SN121ML2

DLP31SN221ML2

DLP31SN551ML2

DLP2ADN670HL4

DLP2ADN900HL4

DLP2ADN121HL4

DLP2ADN161HL4

DLW5BSN191SQ2

DLW5BSN351SQ2

DLW5BSN102SQ2

DLW5BSN152SQ2

DLW5BSN302SQ2

DLW5BTN101SQ2

DLW5BTN251SQ2

DLW5BTN501SQ2

DLW5BTN102SQ2

DLW5BTN142SQ2

Series Line Up

Rated Current

280mA

280mA

400mA

330mA

330mA

280mA

250mA

370mA

340mA

310mA

260mA

230mA

200mA

200mA

90mA

80mA

80mA

160mA

120mA

100mA

80mA

70mA

400mA

330mA

370mA

330mA

300mA

280mA

320mA

5000mA

2000mA

1500mA

1000mA

500mA

6000mA

5000mA

4000mA

2000mA

1500mA

110mA

100mA

90mA

80mA

170mA

150mA

150mA

100mA

100mA

100mA

140mA

130mA

120mA

100mA

100mA

100mA

110mA

100mA

90mA

180mA

140mA

120mA

150mA

Common Mode Impedance

90ohm

±

20%

120ohm

±

20%

160ohm

±

20%

200ohm

±

20%

240ohm

±

20%

280ohm

±

20%

90ohm

±

20%

130ohm

±

20%

200ohm

±

20%

320ohm

±

20%

440ohm

±

20%

67ohm

±

25%

90ohm

±

25%

120ohm

±

25%

180ohm

±

25%

260ohm

±

25%

370ohm

±

25%

67ohm

±

25%

90ohm

±

25%

120ohm

±

25%

67ohm

±

25%

67ohm

±

25%

90ohm

±

25%

120ohm

±

25%

180ohm

±

25%

90ohm

±

25%

160ohm

±

25%

260ohm

±

25%

600ohm

±

25%

1000ohm

±

25%

2200ohm

±

25%

(at 100MHz/20

°

C)

600ohm

±

25%

600ohm

±

25%

67ohm

±

20%

90ohm

±

20%

120ohm

±

20%

67ohm

±

20%

120ohm

±

20%

160ohm

±

20%

90ohm

±

20%

200ohm

±

20%

240ohm

±

20%

280ohm

±

20%

330ohm

±

20%

35ohm

±

20%

67ohm

±

20%

90ohm

±

20%

120ohm

±

20%

220ohm

±

20%

550ohm

±

20%

67ohm

±

20%

4000ohm(Typ.)

190ohm(Typ.)

350ohm(Typ.)

1000ohm(Typ.)

1500ohm(Typ.)

3000ohm(Typ.)

100ohm(Typ.)

250ohm(Typ.)

500ohm(Typ.)

1000ohm(Typ.)

1400ohm(Typ.)

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

139

DLM Series Chip Common Mode Choke Coil

DLM11G

Series (0504 Size)

Audio line common choke also effective to differential mode.

DimensionsEquivalent Circuit

(1)

(2)

(1) (2)

(3)

(4)

No polarity.

(4) (3)

0.2

±

0.15

1.0

±

0.15

0.5

±

0.1

: Electrode

(in mm)

Packaging

Code Packaging

D

180mm Reel Paper Tape

B

Bulk(Bag)

Minimum

Quantity

10000

1000

Rated Value (p: packaging code)

Part Number

Common Mode Impedance

(at 100MHz/20

°

C)

DLM11GN601SZ2

p

600ohm

±

25%

Operating Temperature Range: -40

°

C to +85

°

C Number of Circuit: 1

Rated Current Rated Voltage

100mA

Impedance-Frequency Characteristics (Main Items)

10000

5Vdc

Refer to pages from p.155 to p.158 for mounting information.

Insulation

Resistance

(min.)

100M ohm

Withstand Voltage DC Resistance

25Vdc 0.8ohm max.

Differential Mode

1000

DLM11GN601SZ2

100

Common Mode

DLM11GN601SZ2

10

1

1 10

Frequency (MHz)

100 1000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

140

C31E.pdf

09.4.20

DLM Series Chip Common Mode Choke Coil

DLM2HG

Series (1008 Size)

3 line audio common mode choke coil.

Dimensions

(1) (3) (5)

Equivalent Circuit

(1) (3) (5)

(2) (4)

2.0

±

0.2

(6)

0.4

±

0.2

0.8

±

0.1

(2) (4)

Packaging

(6)

No polarity.

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 3000

B

Bulk(Bag) 1000

: Electrode

(in mm)

Rated Value (p: packaging code)

Part Number

Common Mode Impedance

(at 100MHz/20

°

C)

DLM2HGN601SZ3

p

600ohm

±

25%

Operating Temperature Range: -40

°

C to +85

°

C Number of Circuit: 1

Rated Current Rated Voltage

100mA

Impedance-Frequency Characteristics (Main Items)

10000

16Vdc

Refer to pages from p.155 to p.158 for mounting information.

Insulation

Resistance

(min.)

100M ohm

Withstand Voltage DC Resistance

100Vdc 0.40ohm max.

Differential Mode

1000

DLM2HGN601SZ3

100

DLM2HGN601SZ3

Common Mode

10

1

1 10 100

Frequency (MHz)

1000 10000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

141

DLP Series Chip Common Mode Choke Coil

DLP0NS

Series (03025 Size)

03025 size, very small chip common mode choke coil, Cut-off frequency 3GHz max.

DimensionsEquivalent Circuit

(1)

0.27

±

0.1

(2)

(3)

(4)

No polarity.

(1)

(2)

(4)

0.65

±

0.05

(3)

0.20

+0.05

–0.10

Packaging

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 5000

B

Bulk(Bag) 500

: Electrode

(in mm)

Refer to pages from p.155 to p.158 for mounting information.

Rated Value (p: packaging code)

Part Number

Common Mode Impedance

(at 100MHz/20

°

C)

DLP0NSN670HL2

p

67ohm

±

20%

DLP0NSN900HL2

DLP0NSN121HL2

p p

90ohm

±

20%

120ohm

±

20%

Operating Temperature Range: -40

°

C to +85

°

C Number of Circuit: 1

Rated Current Rated Voltage

110mA

100mA

90mA

Insulation

Resistance

(min.)

Withstand Voltage DC Resistance

5Vdc

5Vdc

5Vdc

100M ohm

100M ohm

100M ohm

12.5Vdc

12.5Vdc

12.5Vdc

2.4ohm

±

25%

3.0ohm

±

25%

3.8ohm

±

25%

HD: for high speed differential signal lines UD: for ultra high speed differential signal lines

Impedance-Frequency Characteristics (Main Items)

10000

Common mode

Differential Mode Transmission Characteristics (Typ.)

0

2

1000 DLP0NSN900HL2

DLP0NSN121HL2

DLP0NSN900HL2

DLP0NSN670HL2

100

4

6

10

8

1

1 10

DLP0NSN121HL2

DLP0NSN900HL2

DLP0NSN670HL2

Differential mode

100

Frequency (MHz)

1000 10000

10

1 10 100

Frequency (MHz)

1000 10000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

142

C31E.pdf

09.4.20

DLP Series Chip Common Mode Choke Coil

DLP11S

Series (0504 Size)

6GHz cut-off frequency (for HDMI) is available.

Dimensions

0.3

±

0.1

Equivalent Circuit

(1)

(2)

(3)

(4)

No polarity.

(1)

(2)

(4)

0.25

+0.1

–0.05

1.25

±

0.1

(3)

: Electrode

(in mm)

Packaging

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 3000

B

Bulk(Bag) 500

Refer to pages from p.155 to p.158 for mounting information.

Rated Value (p: packaging code)

Part Number

Common Mode Impedance

(at 100MHz/20

°

C)

DLP11SN670SL2

DLP11SN121SL2

DLP11SN161SL2

DLP11SN900HL2

DLP11SN201HL2

DLP11SN241HL2

DLP11SN281HL2

p p p p p p p

67ohm

±

20%

120ohm

±

20%

160ohm

±

20%

90ohm

±

20%

200ohm

±

20%

240ohm

±

20%

280ohm

±

20%

180mA

140mA

120mA

150mA

110mA

100mA

90mA

DLP11SN331HL2

DLP11SA350HL2

p p

330ohm

±

20%

35ohm

±

20%

80mA

170mA

DLP11SA670HL2

p 67ohm

±

20% 150mA

DLP11SA900HL2

p 90ohm

±

20%

Operating Temperature Range: -40

°

C to +85

°

C Number of Circuit: 1

150mA

Rated Current Rated Voltage

5Vdc

5Vdc

5Vdc

5Vdc

5Vdc

5Vdc

5Vdc

5Vdc

5Vdc

5Vdc

5Vdc

Insulation

Resistance

(min.)

Withstand Voltage DC Resistance

100M ohm

100M ohm

100M ohm

100M ohm

100M ohm

100M ohm

100M ohm

100M ohm

100M ohm

100M ohm

100M ohm

12.5Vdc

12.5Vdc

12.5Vdc

12.5Vdc

12.5Vdc

12.5Vdc

12.5Vdc

12.5Vdc

12.5Vdc

12.5Vdc

12.5Vdc

1.3ohm

±

25%

2.0ohm

±

25%

2.7ohm

±

25%

1.5ohm

±

25%

3.1ohm

±

25%

3.5ohm

±

25%

4.2ohm

±

25%

4.9ohm

±

25%

0.9ohm

±

25%

1.2ohm

±

25%

1.4ohm

±

25%

HD: for high speed differential signal lines UD: for ultra high speed differential signal lines

Impedance-Frequency CharacteristicsImpedance-Frequency

DLP11SN Series

10000

DLP11SA Series

1000

1000

100

10

1

1

Common mode

DLP11SN331HL2

DLP11SN281HL2

DLP11SN241HL2

DLP11SN201HL2

DLP11SN161SL2

DLP11SN121SL2

DLP11SN900HL2

DLP11SN670SL2

DLP11SN331HL2

DLP11SN281HL2

DLP11SN241HL2

DLP11SN201HL2

DLP11SN161SL2

DLP11SN121SL2

DLP11SN900HL2

DLP11SN670SL2

Differential mode

10 100

Frequency (MHz)

1000 10000

100

10

1

1

Common mode

DLP11SA900HL2

DLP11SA670HL2

DLP11SA350HL2

10

DLP11SA900HL2

DLP11SA670HL2

DLP11SA350HL2

Differential mode

100

Frequency (MHz)

1000 10000

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

143

DLP Series Chip Common Mode Choke Coil

DLP11S Series (0504 Size)

2

4

6

8

10

1

Differential Mode Transmission Characteristics (Typ.)

DLP11SN Series

0

DLP11SA Series

0

10

DLP11SN900HL2

100

Frequency (MHz)

1000 10000

2

4

6

8

10

1 10

DLP11SA900HL2

100

Frequency (MHz)

1000 10000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

144

C31E.pdf

09.4.20

DLP Series Chip Common Mode Choke Coil

DLP31S

Series (1206 Size)

1206 size film type chip common mode choke coil.

Dimensions

0.7

±

0.2

Equivalent Circuit

(1)

(2)

1.6

±

0.15

(2.1)

3.2

±

0.15

(4)

No polarity.

(3)

(1) (2)

(4) (3)

0.3

±

0.2

Packaging

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 3000

B

Bulk(Bag) 500

: Electrode

(in mm)

Refer to pages from p.155 to p.158 for mounting information.

Rated Value (p: packaging code)

Part Number

Common Mode Impedance

(at 100MHz/20

°

C)

DLP31SN121ML2

p

120ohm

±

20%

DLP31SN221ML2

DLP31SN551ML2

p p

220ohm

±

20%

550ohm

±

20%

Operating Temperature Range: -40

°

C to +85

°

C Number of Circuit: 1

Rated Current Rated Voltage

100mA

100mA

100mA

16Vdc

16Vdc

Insulation

Resistance

(min.)

100M ohm

100M ohm

Withstand Voltage DC Resistance

40Vdc

40Vdc

2.0ohm max.

2.5ohm max.

16Vdc 100M ohm 40Vdc 3.6ohm max.

HD: for high speed differential signal lines UD: for ultra high speed differential signal lines

Impedance-Frequency Characteristics (Main Items)

10000

1000

100

Common mode

DLP31SN551ML2

DLP31SN221ML2

DLP31SN121ML2

10

1

1 10

DLP31SN121ML2

Differential mode

DLP31SN221ML2

DLP31SN551ML2

100 1000

Frequency (MHz)

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

145

DLP Series Chip Common Mode Choke Coil

DLP2AD

Series (0804 Size)

2 circuit built-in, 0804 size, HDMI adapted type available, cut-off frequency 3GHz max.

Dimensions

0.25

±

0.1

0.5

±

0.1

Equivalent Circuit

(1) (2) (3) (4)

(1) (2) (3) (4)

(5) (6) (7)

2.0

±

0.1

(8)

(5) (6) (7)

No polarity.

Packaging

(8)

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 3000

B

Bulk(Bag) 500

: Electrode

(in mm)

Refer to pages from p.155 to p.158 for mounting information.

Rated Value (p: packaging code)

Part Number

Common Mode Impedance

(at 100MHz/20

°

C)

DLP2ADN670HL4

DLP2ADN900HL4

DLP2ADN121HL4

DLP2ADN161HL4

p p p p

67ohm

±

20%

90ohm

±

20%

120ohm

±

20%

160ohm

±

20%

DLP2ADN201HL4

DLP2ADN241HL4

p p

200ohm

±

20%

240ohm

±

20%

DLP2ADN281HL4

p

280ohm

±

20%

Operating Temperature Range: -40

°

C to +85

°

C Number of Circuit: 2

Rated Current Rated Voltage

140mA

130mA

120mA

100mA

90mA

80mA

80mA

Insulation

Resistance

(min.)

Withstand Voltage DC Resistance

5Vdc

5Vdc

5Vdc

5Vdc

5Vdc

5Vdc

5Vdc

100M ohm

100M ohm

100M ohm

100M ohm

100M ohm

100M ohm

100M ohm

12.5Vdc

12.5Vdc

12.5Vdc

12.5Vdc

12.5Vdc

12.5Vdc

12.5Vdc

1.3ohm

±

25%

1.7ohm

±

25%

2.0ohm

±

25%

2.5ohm

±

25%

3.2ohm

±

25%

3.8ohm

±

25%

4.6ohm

±

25%

HD: for high speed differential signal lines UD: for ultra high speed differential signal lines

Impedance-Frequency Characteristics (Main Items)

10000

1000

100

Common mode

DLP2ADN281HL4

DLP2ADN241HL4

DLP2ADN201HL4

DLP2ADN161HL4

DLP2ADN121HL4

DLP2ADN900HL4

DLP2ADN670HL4

Differential Mode Transmission Characteristics (Typ.)

0

2

4

DLP2ADN900HL4

6

10

1

1

DLP2ADN670HL4

10

DLP2ADN281HL4

DLP2ADN241HL4

DLP2ADN201HL4

DLP2ADN161HL4

DLP2ADN121HL4

DLP2ADN900HL4

Differential mode

100

Frequency (MHz)

1000 10000

8

10

1 10 100

Frequency (MHz)

1000 10000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

146

C31E.pdf

09.4.20

DLP Series Chip Common Mode Choke Coil

DLP31D

Series (1206 Size)

2 circuit built-in, 1206 size, meet IEEE1394,USB,LVDS.

DimensionsEquivalent Circuit

(1) (2) (3) (4)

0.4

±

0.2

0.8

±

0.1

(1) (2) (3) (4)

(5) (6) (7)

3.2

±

0.15

(8)

: Electrode

(in mm)

(5) (6) (7)

No polarity.

Packaging

(8)

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 3000

B

Bulk(Bag) 500

Refer to pages from p.155 to p.158 for mounting information.

Rated Value (p: packaging code)

Part Number

Common Mode Impedance

(at 100MHz/20

°

C)

DLP31DN900ML4

DLP31DN131ML4

DLP31DN201ML4

p p p

90ohm

±

20%

130ohm

±

20%

200ohm

±

20%

DLP31DN321ML4

p

320ohm

±

20%

DLP31DN441ML4

p 440ohm

±

20%

Operating Temperature Range: -40

°

C to +85

°

C Number of Circuit: 2

Rated Current Rated Voltage

160mA

120mA

100mA

80mA

70mA

10Vdc

10Vdc

10Vdc

Insulation

Resistance

(min.)

100M ohm

100M ohm

Withstand Voltage DC Resistance

25Vdc

25Vdc

25Vdc

1.1ohm max.

1.6ohm max.

2.2ohm max.

100M ohm

10Vdc 100M ohm 25Vdc 3.5ohm max.

10Vdc 100M ohm 25Vdc 4.3ohm max.

HD: for high speed differential signal lines UD: for ultra high speed differential signal lines

Impedance-Frequency Characteristics (Main Items)

10000

Common mode

1000

DLP31DN441ML4

DLP31DN321ML4

DLP31DN201ML4

DLP31DN131ML4

DLP31DN900ML4

100

DLP31DN441ML4

DLP31DN321ML4

10

1

1 10

DLP31DN900ML4

DLP31DN131ML4

DLP31DN201ML4

Differential mode

100 1000

Frequency (MHz)

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

147

DLW Series Chip Common Mode Choke Coil

DLW21S

Series (0805 Size)

Wire-wound common choke, HDMI available type prepaird.

DimensionsEquivalent Circuit

(1)

(2)

(3)

2.0

±

0.2

1.2

±

0.2

(4)

No polarity.

(1) (2)

(4)

(0.45)

(3)

(0.45)

Packaging

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 2000

B

Bulk(Bag) 500

: Electrode

(in mm)

Refer to pages from p.155 to p.158 for mounting information.

Rated Value (p: packaging code)

Part Number

Common Mode Impedance

(at 100MHz/20

°

C)

Rated Current Rated Voltage

Insulation

Resistance

(min.)

Withstand Voltage DC Resistance

DLW21SN670SQ2

DLW21SN900SQ2

DLW21SN121SQ2

DLW21SN181SQ2

DLW21SN261SQ2

DLW21SN371SQ2

DLW21SN670HQ2

p p p p p p p

67ohm

±

25%

90ohm

±

25%

120ohm

±

25%

180ohm

±

25%

260ohm

±

25%

370ohm

±

25%

67ohm

±

25%

400mA

330mA

370mA

330mA

300mA

280mA

320mA

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

20Vdc

10M ohm

10M ohm

10M ohm

10M ohm

10M ohm

10M ohm

10M ohm

125Vdc

125Vdc

125Vdc

125Vdc

125Vdc

125Vdc

50Vdc

0.25ohm max.

0.35ohm max.

0.30ohm max.

0.35ohm max.

0.40ohm max.

0.45ohm max.

0.31ohm max.

DLW21SN900HQ2

DLW21SN121HQ2

p p

90ohm

±

25%

120ohm

±

25%

280mA

280mA

20Vdc

20Vdc

10M ohm

10M ohm

50Vdc

50Vdc

0.41ohm max.

0.41ohm max.

DLW21SR670HQ2

p 67ohm

±

25%

Operating Temperature Range: -40

°

C to +85

°

C Number of Circuit: 1

400mA 20Vdc

DLW21SR670HQ2 is designed to correct line impedance when ESD protection device is also used.

10M ohm 50Vdc 0.25ohm max.

HD: for high speed differential signal lines UD: for ultra high speed differential signal lines

Impedance-Frequency Characteristics (Main Items)

DLW21SN_SQ2 Series DLW21SN_HQ2 Series

10000

1000

DLW21SN371SQ2

DLW21SN261SQ2

DLW21SN181SQ2

DLW21SN121SQ2

DLW21SN900SQ2

DLW21SN670SQ2

100

Common mode

1000

100

Common mode

DLW21SN121HQ2

DLW21SN900HQ2

DLW21SN670HQ2

10

10

1

0.1

1

Differential mode

10

DLW21SN371SQ2

DLW21SN261SQ2

DLW21SN181SQ2

DLW21SN121SQ2

DLW21SN900SQ2

DLW21SN670SQ2

1000

Frequency (MHz)

100

1

0.1

10

DLW21SN121HQ2

DLW21SN900HQ2

DLW21SN670HQ2

100

Frequency (MHz)

Differential mode

1000

Continued on the following page.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

148

C31E.pdf

09.4.20

Impedance-Frequency Characteristics (Main Items)

DLW21SR_HQ2 Series

1000

Common mode

100

DLW21SR670HQ2

10

Differential mode

1

DLW21SR670HQ2

0.1

1 10

Frequency (MHz)

100 1000

Differential Mode Transmission Characteristics (Typ.)

DLW21SN_HQ2 Series

0

DLW21SN900HQ2

2

4

6

8

10

1 10 100

Frequency (MHz)

1000 10000

DLW Series Chip Common Mode Choke Coil

DLW21S Series (0805 Size)

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

149

DLW Series Chip Common Mode Choke Coil

DLW21H

Series (0805 Size)

Low profile wire-wound common choke coil.

DimensionsEquivalent Circuit

(1)

(2)

2.0

±

0.2

1.2

±

0.2

(3)

(4)

No polarity.

(0.45)

(1)

(4)

(0.45)

(2)

(3)

( ): Reference Value

: Electrode

(in mm)

Packaging

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 3000

B

Bulk(Bag) 500

Refer to pages from p.155 to p.158 for mounting information.

Rated Value (p: packaging code)

Part Number

Common Mode Impedance

(at 100MHz/20

°

C)

DLW21HN670SQ2

DLW21HN900SQ2

DLW21HN121SQ2

p p p

67ohm

±

25%

90ohm

±

25%

120ohm

±

25%

DLW21HN181SQ2

p

180ohm

±

25%

Operating Temperature Range: -40

°

C to +85

°

C Number of Circuit: 1

Rated Current Rated Voltage

330mA

330mA

280mA

250mA

50Vdc

50Vdc

Insulation

Resistance

(min.)

10M ohm

10M ohm

Withstand Voltage DC Resistance

125Vdc

125Vdc

0.35ohm max.

0.35ohm max.

50Vdc 10M ohm 125Vdc 0.45ohm max.

50Vdc 10M ohm 125Vdc 0.50ohm max.

HD: for high speed differential signal lines UD: for ultra high speed differential signal lines

Impedance-Frequency Characteristics (Main Items)

10000

DLW21HN181SQ2

Common mode

1000

DLW21HN121SQ2

100

DLW21HN900SQ2

DLW21HN670SQ2

10

1

0.1

1

Differential mode

10

DLW21HN181SQ2

DLW21HN121SQ2

DLW21HN900SQ2

DLW21HN670SQ2

1000

Frequency (MHz)

100

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

150

C31E.pdf

09.4.20

DLW Series Chip Common Mode Choke Coil

DLW31S

Series (1206 Size)

1206 size wire-wound common mode choke coil.

DimensionsEquivalent Circuit

(1)

(2)

3.2

±

0.2

1.6

±

0.2

(4)

(3)

No polarity.

(1) (2)

(4) (3)

(0.6)

: Electrode

(in mm)

Packaging

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 2000

B

Bulk(Bag) 500

(0.6)

Refer to pages from p.155 to p.158 for mounting information.

Rated Value (p: packaging code)

Part Number

Common Mode Impedance

(at 100MHz/20

°

C)

DLW31SN900SQ2

DLW31SN161SQ2

DLW31SN261SQ2

DLW31SN601SQ2

p p p p

90ohm

±

25%

160ohm

±

25%

260ohm

±

25%

600ohm

±

25%

DLW31SN102SQ2

DLW31SN222SQ2

p p

1000ohm

±

25%

2200ohm

±

25%

Operating Temperature Range: -40

°

C to +85

°

C Number of Circuit: 1

Impedance-Frequency Characteristics

Rated Current Rated Voltage

370mA

340mA

310mA

260mA

230mA

200mA

50Vdc

50Vdc

50Vdc

Insulation

Resistance

(min.)

10M ohm

10M ohm

10M ohm

Withstand Voltage DC Resistance

125Vdc

125Vdc

125Vdc

0.3ohm max.

0.4ohm max.

0.5ohm max.

50Vdc

50Vdc

10M ohm

10M ohm

125Vdc

125Vdc

0.8ohm max.

1.0ohm max.

50Vdc 10M ohm 125Vdc 1.2ohm max.

HD: for high speed differential signal lines UD: for ultra high speed differential signal lines

10000

1000

Common mode

DLW31SN222SQ2

DLW31SN102SQ2

DLW31SN601SQ2

DLW31SN261SQ2

DLW31SN161SQ2

DLW31SN900SQ2

100

10

1

0.1

1

DLW31SN222SQ2

DLW31SN102SQ2

DLW31SN601SQ2

DLW31SN261SQ2

DLW31SN161SQ2

DLW31SN900SQ2

Differential mode

10 1000

Frequency (MHz)

100

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

151

DLW Series Chip Common Mode Choke Coil

DLW5AH

/

DLW5BS

Series (2014/2020 Size)

5A max, common mode choke coil for power lines.

Equivalent Circuit

(1)

DLW5AH

Dimensions

(W) 3.6

±

0.3

(1) (2)

*

*

0.5 min.

(L) 5.0

±

0.3

* Starting position of wiring should be covered with resin.

(4) (3)

1.3

0.3

0.9

0.3

1.3

0.3

: Electrode

(in mm)

(2)

(3)

(4)

No polarity.

Packaging

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 400

K

330mm Reel Embossed Tape 1500

B

Bulk(Bag) 100

DLW5BS

Dimensions

Polarity Marking

* The marking to indicate the product direction can be applicable.

(Optional)

Equivalent Circuit

(1) (2)

3.6

±

0.3

(W) 5.0

±

0.3

(1) (2)

(4) (3)

1.3

±

0.3

0.9

±

0.3

0.5 min.

(L) 5.0

±

0.3

(3)

(4)

No polarity.

Packaging

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 400

K

330mm Reel Embossed Tape 1500

B

Bulk(Bag) 100

: Electrode

(in mm)

Refer to pages from p.155 to p.158 for mounting information.

Rated Value (p: packaging code)

Part Number

Common Mode Impedance

(at 100MHz/20

°

C)

DLW5AHN402SQ2

p

DLW5BSN191SQ2

p

DLW5BSN351SQ2

DLW5BSN102SQ2

p p

4000ohm(Typ.)

190ohm(Typ.)

350ohm(Typ.)

1000ohm(Typ.)

DLW5BSN152SQ2

p 1500ohm(Typ.)

DLW5BSN302SQ2

p 3000ohm(Typ.)

Operating Temperature Range: -25

°

C to +85

°

C Number of Circuit: 1

Rated Current Rated Voltage

200mA

5000mA

2000mA

1500mA

1000mA

500mA

Impedance-Frequency Characteristics (Main Items)

100000

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

Insulation

Resistance

(min.)

10M ohm

10M ohm

10M ohm

10M ohm

10M ohm

10M ohm

DLW5BSN191

Withstand Voltage DC Resistance

125Vdc

125Vdc

125Vdc

125Vdc

125Vdc

125Vdc

Derating of Rated Current

3.0ohm max.

0.02ohm max.

0.04ohm max.

0.06ohm max.

0.1ohm max.

0.3ohm max.

DLW5BSN191SQ2 Temperature Derating

5

10000 DLW5AHN402SQ2

DLW5BSN302SQ2

DLW5BSN152SQ2

DLW5BSN102SQ2

DLW5BSN351SQ2

DLW5BSN191SQ2

1000

4.75

Common mode

4.5

100

10

1

DLW5AHN402SQ2

DLW5BSN302SQ2

DLW5BSN152SQ2

Differential mode

10

Frequency (MHz)

100

DLW5BSN102SQ2

DLW5BSN351SQ2

DLW5BSN191SQ2

1000

0 10 20 30 40 50 60

Operating Temperature (

°

C)

70

75

°

C

80

85

°

C

90 100

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

152

C31E.pdf

09.4.20

DLW Series Chip Common Mode Choke Coil

DLW5BT

Series (2020 Size)

Low profile wire-wound common choke coil for power lines.

Dimensions

Polarity Marking

Equivalent Circuit

(1) * The marking to indicate the product direction can be applicable.

(Optional)

(2)

3.6

±

0.3

(W) 5.0

±

0.3

(1) (2)

0.5 min.

(L) 5.0

±

0.3

(3)

(4)

No polarity.

Packaging

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 700

K

330mm Reel Embossed Tape 2500

B

Bulk(Bag) 100

(4) (3)

1.3

±

0.3

0.9

±

0.3

: Electrode

(in mm)

Refer to pages from p.155 to p.158 for mounting information.

Rated Value (p: packaging code)

Part Number

Common Mode Impedance

(at 100MHz/20

°

C)

DLW5BTN101SQ2

p

DLW5BTN251SQ2

p

100ohm(Typ.)

250ohm(Typ.)

DLW5BTN501SQ2

p

DLW5BTN102SQ2

p

500ohm(Typ.)

1000ohm(Typ.)

DLW5BTN142SQ2

p 1400ohm(Typ.)

Operating Temperature Range: -25

°

C to +85

°

C Number of Circuit: 1

Rated Current Rated Voltage

6000mA

5000mA

4000mA

2000mA

1500mA

Impedance-Frequency Characteristics (Main Items)

10000

1000

Common mode

DLW5BTN142SQ2

DLW5BTN102SQ2

DLW5BTN501SQ2

DLW5BTN251SQ2

100

DLW5BTN101SQ2

50Vdc

50Vdc

50Vdc

50Vdc

50Vdc

6000

5000

4750

4000

3400

3000

Insulation

Resistance

(min.)

10M ohm

10M ohm

10M ohm

10M ohm

10M ohm

Withstand Voltage DC Resistance

125Vdc

125Vdc

125Vdc

125Vdc

125Vdc

Derating of Rated Current

DLW5BTN101/251/501

7000

0.009ohm

±

40%

0.014ohm

±

40%

0.019ohm

±

40%

0.024ohm

±

40%

0.040ohm

±

40%

10

2000

1

1 10

DLW5BTN101SQ2

DLW5BTN251SQ2

DLW5BTN501SQ2

DLW5BTN102SQ2

DLW5BTN142SQ2 Differential mode

100 1000

Frequency (MHz)

1000

0

0 20 100 40 60

65

Temperature (

°

C)

80

85

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

153

Chip Common Mode Choke Coil

!

Caution/Notice

!Caution

Rating

Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance.

Soldering and Mounting

1. Self-heating

Please provide special attention when mounting chip common mode choke coils DLW5 series in close proximity to other products that radiate heat.

The heat generated by other products may deteriorate the insulation resistance and cause excessive heat in this component.

2. Mounting Direction

Mount Chip Common Mode Choke Coils in right direction. Wrong direction, which is 90 degrees rotated from right direction, causes not only open or short circuit but also flames or other serious trouble.

right direction

Z wrong direction

Z

Storage and Operating Conditions

<Operating Environment>

Do not use products in a chemical atmosphere such as chlorine gas, acid or sulfide gas.

Do not use products in the environment close to the organic solvent.

<Storage and Handling Requirements>

1. Storage Period

DLW11G/DLM2HG series should be used within 6 months, the other series should be used within 12 months.

Solderability should be checked if this period is exceeded.

2. Storage Conditions

(1) Storage temperature: -10 to +40˚C

Notice

Relative humidity: 30 to 70%

Avoid sudden changes in temperature and humidity.

(2) Do not store products in a chemical atmosphere

Notice (Soldering and Mounting)

1. Cleaning

Failure and degradation of a product are caused by the cleaning method. When you clean in conditions that are not in mounting information, please contact

Murata engineering.

2. Soldering

Reliability decreases with improper soldering methods.

Please solder by the standard soldering conditions shown in mounting information.

3. Other

Noise suppression levels resulting from Murata's EMI suppression filters EMIFIL r

may vary, depending on the circuits and ICs used, type of noise, mounting pattern, mounting location, and other operating conditions. Be sure to check and confirm in advance the noise suppression effect of each filter, in actual circuits, etc. before applying the filter in a commercialpurpose equipment design.

Handling

1. Resin Coating (Except DLW Series.)

Using resin for coating/molding products may affect the products performance.

So please pay careful attention in selecting resin.

Prior to use, please make the reliability evaluation with the product mounted in your application set.

2. Resin Coating (DLW Series)

The impedance value may change due to high curestress of resin to be used for coating/molding products.

An open circuit issue may occur by mechanical stress caused by the resin, amount/cured shape of resin, or operating condition etc. Some resin contains some impurities or chloride possible to generate chlorine by hydrolysis under some operating condition may cause corrosion of wire of coil, leading to open circuit.

So, please pay your careful attention in selecting resin in case of coating/molding the products with the resin.

Prior to use the coating resin, please make sure no reliability issue is observed by evaluating products mounted on your board.

3. Caution for Use (DLW Series)

When you hold products with a tweezer, please hold by the sides. Sharp materials, such as a pair of tweezers, should not touch the winding portion to prevent breaking the wire. Mechanical shock should not be applied to the products mounted on the board

to prevent breaking the core.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

154

C31E.pdf

09.4.20

DL

p

Chip Common Mode Choke Coil

1. Standard Land Pattern Dimensions

Soldering and Mounting

Land Pattern

+ Solder Resist

Land Pattern

Solder Resist

(in mm)

DLM11G

DLM2HG

DLP0NS

DLP11S

DLP2AD

DLP31S

DLP31D

DLW21S

DLW21H

DLW31SN

DLW5AH

DLW5B

o Reflow and Flow

DLM2HG

1.0

4.0

DLP31S

1.0 0.6 1.0

DLP31D

2.8

0.8 Pitch 0.4

o

Reflow Soldering

DLP0NS

0.30

DLP11S DLP2AD

0.25

1.75

DLM11G

0.5

1.5

0.90

DLW21S/21H/31SN

0.55

1.95

DLW5AH/5B

0.5

3 a b

Series

DLW21S/H

DLW31SN a

0.8

1.6

b

2.6

3.7

c

0.4

0.4

d

1.2

1.6

1

: If the pattern is made with wider than 1.2mm (DLW21) /

1.6mm (DLW31S) it may result in components turning around, because melting speed is different. In the worst case, short circuit between lines may occur.

2

: If the pattern is made with less than 0.4mm, in the worst case, short circuit between lines may occur due to spread of soldering paste or mount placing accuracy.

3

: If the pattern is made with wider than 0.8mm (DLW21) /

1.6mm (DLW31SN), the bending strength will be reduced.

Do not use gild pattern; excess soldering heat may dissolve metal of a copper wire.

0.9

2.9

5.5

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

155

DL

p

Chip Common Mode Choke Coil Soldering and Mounting

2. Solder Paste Printing and Adhesive Application

When reflow soldering the chip common mode choke coils , the printing must be conducted in accordance with the following cream solder printing conditions.

If too much solder is applied, the chip will be prone to damage by mechanical and thermal stress from the PCB and may crack.

Standard land dimensions should be used for resist and copper foil patterns.

DLP

Series

DLW

DLM

Solder Paste Printing

o Guideline of solder paste thickness:

100-150

µ m: DLW21S/21H/31S,

DLP0NS/11S/2AD/DLM11G

150-200

µ m: DLP31D/31S, DLM2HG,

DLW5AH/5BS/5BT

*Solderability is subject to reflow conditions and thermal conductivity. Please make sure that your product has been evaluated in view of your specifications with our product being mounted to your product.

When flow soldering the chip common mode choke coils , apply the adhesive in accordance with the following conditions.

If too much adhesive is applied, then it may overflow into the land or termination areas and yield poor solderability.

In contrast, if insufficient adhesive is applied, or if the adhesive is not sufficiently hardened, then the chip may become detached during flow soldering process.

(in mm)

Adhesive Application

DLP31S/DLM2HG/DLP31D

Apply 0.3mg of bonding agent at each chip.

DLP31D DLP31S

DLP0NS/11S/31S/DLM11G DLW21S/21H/31S

Coating Position of

Bonding Agent

Coating Position of

Bonding Agent

DLM2HG a b a b a

Coating Position of

Bonding Agent

Series

DLP0NS

DLP11S a b c d

0.3

0.3

0.3

0.5

0.7

0.55

0.3

0.55

DLP31S

1.0

0.6

0.7

2.1

DLM11G

0.5

0.5

0.4

0.7

Series b c

DLW21S/H

0.8

2.6

0.5

1.2

DLW31S a d

1.6

3.7

0.4

1.6

DLP2AD/31D c

Series a d

DLP2AD

0.55

0.4

0.25

0.5

DLP31D

1.0

b c

0.8

0.4

0.8

d

DLW5AH/5BS/5BT

5.5

2.9

0.9

DLM2HG

1.0

4.0

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

156

C31E.pdf

09.4.20

DL

p

Chip Common Mode Choke Coil Soldering and Mounting

3. Standard Soldering Conditions

(1) Soldering Methods

Use flow and reflow soldering methods only.

Use standard soldering conditions when soldering chip common mode choke coils .

In cases where several different parts are soldered, each having different soldering conditions, use those conditions requiring the least heat and minimum time.

Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based solder will deteriorate performance of products.

If using DLP/DLM series with Sn-Zn based solder, please contact Murata in advance.

(2) Soldering Profile o Flow Soldering Profile

(Sn-3.0Ag-0.5Cu Solder)

DLM2HG

DLP31D/31S

Series

Flux: o

Use Rosin-based flux.

In case of DLW21/31 series, use Rosin-based flux with converting chlorine content of 0.06 to 0.1wt%.

In case of using RA type solder, products should be cleaned completely with no residual flux.

o

Do not use strong acidic flux (with chlorine content exceeding 0.20wt%) o Do not use water-soluble flux.

For additional mounting methods, please contact Murata.

T3

T2 t2

Heating

T1

Limit Profile

Standard Profile

Pre-heating t1

Time (s)

Pre-heating

Temp. (T1)

150

°

C

Time. (t1)

60s min.

Standard Profile

Heating

Temp. (T2) Time. (t2)

Cycle of Flow

250

°

C 4 to 6s

2 times max.

Limit Profile

Heating

Temp. (T3) Time. (t2)

265

±

3

°

C 5s max.

Cycle of Flow

2 times max.

o Reflow Soldering Profile

(Sn-3.0Ag-0.5Cu Solder)

DLM/DLP

DLW21/31

DLW5A/5B

Series

T2

T1

T4

T3

180

150

Pre-heating t1 t2

90s

±

30s

Limit Profile

Standard Profile time (s)

Heating

Temp. (T1)

Standard Profile

Time. (t1)

Peak

Temperature

(T2)

Cycle of Reflow

220

°

C min.

30 to 60s 245

±

3

°

C

2 times max.

Heating

Temp. (T3)

Limit Profile

Time. (t2)

Peak

Temperature

(T4)

Cycle of Reflow

230

°

C min.

60s max.

260

°

C/10s

2 times max.

220

°

C min.

30 to 60s 250

±

3

°

C

2 times max.

230

°

C min.

60s max.

260

°

C/10s

2 times max.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

157

DL

p

Chip Common Mode Choke Coil Soldering and Mounting

(3) Reworking with Solder Iron

The following conditions must be strictly followed when using a soldering iron.

Pre-heating: 150

°

C 60s min.

Soldering iron power output / Tip diameter:

30W max. / ø3mm max.

Temperature of soldering iron tip / Soldering time / Times:

*

350

°

C max. / 3-4s / 2 times*

1

1

DLP0NS, DLP11S, DLP2AD: 380

°

C max. / 3-4s / 2 times

Do not allow the tip of the soldering iron to directly contact the chip.

For additional methods of reworking with a soldering iron, please contact Murata engineering.

4. Cleaning

Following conditions should be observed when cleaning chip EMI filter.

(1) Cleaning Temperature: 60

°

C max. (40

°

C max. for alcohol type cleaner)

(2) Ultrasonic

Output: 20W/liter max.

Duration: 5 minutes max.

Frequency: 28 to 40kHz

(3) Cleaning agent

The following list of cleaning agents have been tested on the individual components. Evaluation of final assembly should be completed prior to production.

Do not clean DLW (except DLW21H) series.

Before cleaning, please contact Murata engineering.

(a) Alcohol cleaning agent

Isopropyl alcohol (IPA)

(b) Aqueous cleaning agent

Pine Alpha ST-100S

(4) Ensure that flux residue is completely removed.

Component should be thoroughly dried after aqueous agent has been removed with deionized water.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

158

C31E.pdf

09.4.20

DL

p

Chip Common Mode Choke Coil Packaging

Minimum Quantity and Dimensions of 8mm Width Paper / Embossed Tape

1

4.0

2.0

±

0.05

±

0.1

4.0

±

0.1

ø1.5

+0.1

-0

<Embossed> c d

<Paper>

Part Number

DLM11G

DLM2HG

DLP0NS

DLP11S

DLP2AD

DLP31D/31S

DLW21S

DLW21H

DLW31S

Direction of Feed b

1 DLM11G: 2.0

±

0.05

c: Depth of Cavity

(Embossed Tape) c c: Total Thickness of Tape

(Paper Tape)

Cavity Size a

1.45

2.75

0.95

1.4

2.2

3.5

2.25

2.3

3.6

b

1.2

2.25

0.75

1.2

1.2

1.9

1.45

1.55

2.0

c

0.8 max.

1.3

0.55

0.98

0.98

1.3

1.4

1.1

2.1

d

-

0.25

0.25

0.25

0.25

0.25

0.3

0.25

0.3

Minimum Qty. (pcs.)

ø180mm Reel ø330mm Reel

Paper Tape Embossed Tape Paper Tape Embossed Tape

Bulk

10000

-

-

1000

-

-

3000

5000

-

-

-

-

1000

500

-

-

-

-

-

-

3000

3000

3000

2000

3000

2000

-

-

-

-

-

-

-

-

-

-

-

-

500

500

500

500

500

500

(in mm)

Minimum Quantity and Dimensions of 12mm Width Embossed Tape

2.0

±

0.05

8.0

±

0.1

4.0

±

0.1

ø1.5

+0.1

-0

0.4

c

Part Number

DLW5AH

DLW5BS

DLW5BT

Cavity Size a

5.4

5.5

5.5

b

4.1

5.4

5.4

c

4.4

4.7

2.7

Minimum Qty. (pcs.)

ø180mm Reel ø330mm Reel

400

400

700

1500

1500

2500

Bulk

100

100

100 b

Direction of feed c: Depth of Cavity

(in mm)

"Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity".

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

159

DL

p

Chip Common Mode Choke Coil

Design Kits

o

EKEMDL21J (Chip Common Mode Choke Coils)

No.

Part Number

DLW21HN670SQ2

DLW21HN900SQ2

DLW21HN121SQ2

DLW21HN181SQ2

DLW21SN670SQ2

DLW21SN900SQ2

DLW21SN121SQ2

DLW21SN181SQ2

DLW21SN261SQ2

DLW21SN371SQ2

DLW21SN670HQ2

DLW21SN900HQ2

DLW21SN121HQ2

DLW21SR670HQ2

DLP0NSN670HL2

DLP0NSN900HL2

DLP0NSN121HL2

DLP11SN670SL2

DLP11SN121SL2

DLP11SN161SL2

DLP11SN900HL2

DLP11SN201HL2

DLP11SN241HL2

DLP11SN281HL2

DLP11SN331HL2

DLP11SA350HL2

DLP11SA670HL2

DLP11SA900HL2

DLP2ADN670HL4

DLP2ADN900HL4

DLP2ADN121HL4

DLP2ADN161HL4

DLP2ADN201HL4

DLP2ADN241HL4

DLP2ADN281HL4

29

30

31

32

25

26

27

28

33

34

35

21

22

23

24

17

18

19

20

13

14

15

16

9

10

11

12

7

8

5

6

3

4

1

2

Quantity

(pcs.)

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

Common Mode Impedance

(at 100MHz, 20 degrees C)

120

Ω±

20%

67

Ω±

20%

120

Ω±

20%

160

Ω±

20%

90

Ω±

20%

200

Ω±

20%

240

Ω±

20%

280

Ω±

20%

330

Ω±

20%

35

Ω±

25%

67

Ω±

25%

90

Ω±

25%

67

Ω±

20%

90

Ω±

20%

120

Ω±

20%

160

Ω±

20%

200

Ω±

20%

240

Ω±

20%

280

Ω±

20%

67

Ω±

25%

90

Ω±

25%

120

Ω±

25%

180

Ω±

25%

67

Ω±

25%

90

Ω±

25%

120

Ω±

25%

180

Ω±

25%

260

Ω±

25%

370

Ω±

25%

67

Ω±

25%

90

Ω±

25%

120

Ω±

25%

67

Ω±

25%

67

Ω±

20%

90

Ω±

20%

Rated Voltage

(Vdc)

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

20

20

5

5

50

50

20

20

50

50

50

50

50

50

50

50

Rated Current

(mA)

80

170

150

150

140

130

120

100

90

180

140

120

150

110

100

90

90

80

80

300

280

320

280

280

400

110

100

330

330

280

250

400

330

370

330

Insulation Resistance

(M

min.)

100

100

100

100

100

100

100

100

100

100

100

100

100

100

100

100

100

100

100

10

10

100

100

10

10

10

10

10

10

10

10

10

10

10

10 o

EKEMDCC5B (Chip Common Mode Choke Coils for DC Power Line / SMD Block type EMIFILr for Power Line)

No.

7

8

5

6

3

4

1

2

9

10

11

Part Number

DLW5AHN402SQ2

DLW5BSN191SQ2

DLW5BSN351SQ2

DLW5BSN102SQ2

DLW5BSN152SQ2

DLW5BSN302SQ2

DLW5BTN101SQ2

DLW5BTN251SQ2

DLW5BTN501SQ2

DLW5BTN102SQ2

DLW5BTN142SQ2

Quantity

(pcs.)

5

5

5

5

5

5

5

5

5

5

5

Common Mode Impedance

(at 100MHz, 20 degrees C)

4000

(Typ.)

190

(Typ.)

350

(Typ.)

1000

(Typ.)

1500

(Typ.)

3000

(Typ.)

100

(Typ.)

250

(Typ.)

500

(Typ.)

1000

(Typ.)

1400

(Typ.)

Rated Voltage

(Vdc)

50

50

50

50

50

50

50

50

50

50

50

Rated Current

(mA)

200

5000

2000

1500

1000

500

6000

5000

4000

2000

1500

Insulation Resistance

(M

min.)

10

10

10

10

10

10

10

10

10

10

10

No.

12

13

Part Number

BNX022-01

BNX023-01

Quantity

(pcs.)

5

5

Insertion Loss

1MHz to 1GHz: 35dB min.

1MHz to 1GHz: 35dB min.

Rated Voltage

(Vdc)

50

100

Rated Current

(A)

10

15

Insulation Resistance

(M

min.)

500

500

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

160

C31E.pdf

09.4.20

Block Type EMIFILr

BNX

Series Line Up

Function Example

Product Detail

!Caution/Notice

Soldering and Mounting

Packaging

Design Kits

162

162

165

168

170

174

175

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

161

BNX

Block Type EMIFIL

r

Series Line Up / Function Example

Type

SMD Type

p165 p166

Lead Type

p167

Lead Type Low Profile

Part Number

BNX022-01

BNX023-01

BNX002-01

BNX003-01

BNX005-01

BNX012-01

BNX016-01

Rated Voltage

50Vdc

100Vdc

50Vdc

150Vdc

50Vdc

50Vdc

25Vdc

Effective Frequency Range

1MHz to 1GHz:35dB min.

1MHz to 1GHz:35dB min.

1MHz to 1GHz:40dB min.

5MHz to 1GHz:40dB min.

1MHz to 1GHz:40dB min.

1MHz to 1GHz:40dB min.

100kHz to 1GHz:40dB min.

Rated Current

10A

15A

10A

10A

15A

15A

15A

Noise Suppression of Radiation Noise from Power Line Cable

Antenna

Test Board

DC-DC Converter

BNX012

IN

12V

OUT

5V

AC

Adaptor

12Vdc

Cable

AC100V

100

µ

F

Power

Circuit

(SW)

Power Block

Clock Drive

(30MHz)

Digital Block c Test Result

30

20

10

0

70

60

50

40

Without Filter

200 400 600

Frequency (MHz)

800 1000

With BNX012-01

30

20

10

0

70

60

50

40

200 400 600

Frequency (MHz)

800 1000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

162

C31E.pdf

09.4.20

Impulse Noise Countermeasure

+B CB

Impulse Noise

Generator:

INS-4420

(4kV, 50nsec)

PSG

BNX

CG c

Without Filter

60dB

(40dB+20dB)

ATT

Applied Impulse Voltage: 4kV/50nS

Y-AXIS: 1kV/div

4kV

Oscilloscope:

TDS7254 c With Filter

BNX Function Example

BNX002-01 BNX012-01 BNX022-01

ESD Countermeasure

5000

4000

ESD Waveform Comparison

3000

2000

Initial

1000 with BNX022-01

0

-1000

-10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200

Time (nsec)

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

163

EMI

Suppression

Effect

BNX Series

Suppression of Ripple Noise of DC Side in the Switching Power Supply

Test Circuit

BNX002-01

Switching Power Supply

Type of Filter EMI Suppression Effect / Description

There is high frequency noise of 0.5V maximum.

Without Filter

+5.0V

50

µ s/div

0.2V/div

+5V

CG

BNX002-01 can suppress most of noise.

When BNX002-01 is used

+5.0V

50

µ s/div

0.2V/div

Example of Impulse Noise Suppression

Type of Filter EMI Suppression Effect

Without Filter

Impulse Noise

2000V/50ns

Y-axis: 500V/div

X-axis: 10ns/sec

When BNX002 is used

Y-axis: 500V/div

X-axis: 10ns/sec

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

164

C31E.pdf

09.4.20

BNX Series Block Type EMIFIL

r

BNX02p

Series

SMD package of block type EMIFILr.

Dimensions

(1) (3)

(1)

(3)

(3)

(1)

12.1

±

0.2

(2)

BNX022

(4)

(4)

7.0

±

0.2

1.55

±

0.2

1.0

±

0.3

2.5

±

0.2

1.55

±

0.2

(4)

(4)

(2)

Rated Value (p: packaging code)

Part Number Rated Voltage Withstand Voltage Rated Current

Insulation Resistance

(min.)

BNX022-01

p

50Vdc

BNX023-01

p 100Vdc

Operating Temperature Range: -40

°

C to +125

°

C

125Vdc

250Vdc

Insertion Loss Characteristics

0

10A

15A

500M ohm

500M ohm

(4) (2)

: Electrode

(in mm)

Equivalent Circuit

L1 L3

(1) B

C1

L2

(3) PSG

C2

CB (2)

CG (4)

(1)-(4): Terminal Number

PSG: Power Supply Ground

CG: Circuit Ground

CB: Circuit+B

Packaging

Code Packaging

Minimum

Quantity

L

180mm Reel Embossed Tape 400

K

330mm Reel Embossed Tape 1500

B

Bulk(Bag) 100

Refer to pages from p.170 to p.173 for mounting information.

Insertion Loss

(20 to 25 degrees C line impedance=50 ohm)

1MHz to 1GHz:35dB min.

1MHz to 1GHz:35dB min.

20

40

BNX022-01

BNX023-01

60

80

100

0.1

1 10

Frequency (MHz)

100

Notice (Rating)

In operating temperatures exceeding

+85

°

C, derating of current is necessary for

BNX022 series. Please apply the derating curve shown in chart according to the operating temperature.

Derating

1000

In operating temperatures exceeding

+85

°

C, derating of current is necessary for

BNX023 series. Please apply the derating curve shown in chart according to the operating temperature.

Derating

15

10

1

0

-40 85 125

Operating Temperature (

°

C)

1

0

-40 85 125

Operating Temperature (

°

C)

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

165

BNX Series Block Type EMIFIL

r

BNX00p

Series

Large insertion loss from several hundred kHz to several GHz.

Dimensions

12.0

±

0.5

BNX002/BNX003

11.0

±

0.5

Equivalent Circuit

L1 L3

(1) B

C1

L2

(3) PSG

C2

CB (2)

CG (4)

(1)-(4): Terminal Number

PSG: Power Supply Ground

CG: Circuit Ground

CB: Circuit+B

ø0.8

0.8

±

0.1

7.5

±

0.2

2.5

±

0.2

ø0.8

2.5

±

0.2

CG

PSG B

ø0.8

±

0.6

0.1

2.5

±

0.2

CB

CG

PSG: Power supply ground

CG: Load circuit ground

CB: Load circuit + Bias

(in mm)

Packaging

Code

-

Packaging

Box

Minimum Quantity

100

BNX005

Dimensions

12.0

±

0.5

11.0

±

0.5

Equivalent Circuit

L1 L3

(1) B

(3) PSG

L2

C2

CB (2)

C1

CG

(1)-(4): Terminal Number

PSG: Power Supply Ground

CG: Circuit Ground

CB: Circuit+B

(4)

ø1.0

0.8

±

0.1

7.5

±

0.2

2.5

±

0.2

ø1.0

2.5

±

0.2

ø1.0

0.6

±

0.1

2.5

±

0.2

CG

PSG B

CB

CG

PSG: Power supply ground

CG: Load circuit ground

CB: Load circuit + Bias

Packaging

Code

-

Packaging

Box

Minimum Quantity

100

(in mm)

Refer to pages from p.170 to p.173 for mounting information.

Rated Value

Part Number

BNX002-01

BNX003-01

Rated Voltage Withstand Voltage Rated Current

Insulation Resistance

(min.)

50Vdc

150Vdc

BNX005-01

50Vdc

Operating Temperature Range: -30

°

C to +85

°

C

125Vdc

375Vdc

125Vdc

Insertion Loss Characteristics

0

(50

- 50

)

10A

10A

15A

100M ohm

100M ohm

100M ohm

BNX003-01

20

Insertion Loss

(20 to 25 degrees C line impedance=50 ohm)

1MHz to 1GHz:40dB min.

5MHz to 1GHz:40dB min.

1MHz to 1GHz:40dB min.

40

BNX002-01

(BNX005-01)

60

80

100

0.001

0.01

0.1

1

Frequency (MHz)

10 100 1000

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

166

C31E.pdf

09.4.20

BNX Series Block Type EMIFIL

r

BNX01p

Series

Low profile version of BNX series.

Dimensions

12.0

±

0.2

BNX***

0.8

±

0.1

*** : 012/016

7.5

±

0.2

0.8

±

0.1

2.5

±

0.2

ø0.8

±

0.1

11.0

±

0.2

ø0.8

±

0.1

0.6

±

0.1

2.5

±

0.2

Equivalent Circuit

L1 L3

(1) B

C1

(3) PSG

L2

C2

CB (2)

CG (4)

(1)-(4): Terminal Number

PSG: Power Supply Ground

CG: Circuit Ground

CB: Circuit+B

CG

PSG

B

CB

CG

PSG: Power supply ground

CG: Load circuit ground

CB: Load circuit + Bias

Packaging

Code

-

Packaging

Box

Minimum Quantity

150

(in mm)

Refer to pages from p.170 to p.173 for mounting information.

Rated Value

Part Number Rated Voltage Withstand Voltage Rated Current

Insulation Resistance

(min.)

BNX012-01

50Vdc

BNX016-01

25Vdc

Operating Temperature Range: -40

°

C to +125

°

C

125Vdc

62.5Vdc

Insertion Loss Characteristics

0

(50

- 50

)

15A

15A

500M ohm

50M ohm

20

40

Insertion Loss

(20 to 25 degrees C line impedance=50 ohm)

1MHz to 1GHz:40dB min.

100kHz to 1GHz:40dB min.

Notice (Rating)

In operating temperatures exceeding

+85

°

C, derating of current is necessary for

BNX01 p series. Please apply the derating curve shown in chart according to the operating temperature.

BNX012-01

Derating

BNX016-01

60

15

80

10

100

0.001

0.01

0.1

1

Frequency (MHz)

10 100 1000

5

1

0

-40 85 102.5 120 125

Operating Temperature [

°

C]

"

Connecting

±

power line

In case of using

±

power line, please connect to each terminal as shown.

Power Supply

(BNX Input)

Power Supply +Bias

Power Supply Ground

Power Supply -Bias

Power Supply Ground

BNX

B

PSG

CB

CG

B

PSG

CB

CG

Circuit

(BNX Output)

Load Circuit +Bias

Load Circuit Ground

Load Circuit -Bias

Load Circuit Ground

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

167

Block Type EMIFIL

r

SMD Type

!

Caution/Notice

!Caution

Rating

Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance.

Notice

Storage and Operating Conditions

<Operating Environment>

Do not use products in a chemical atmosphere such as chlorine gas, acid or sulfide gas.

Do not use products in the environment close to the organic solvent.

<Storage and Handling Requirements>

1. Storage Period

BNX series should be used within 12 months.

Solderability should be checked if this period is exceeded.

2. Storage Conditions

(1) Storage temperature: -10 to +40˚C

Relative humidity: 30 to 70%

Avoid sudden changes in temperature and humidity.

(2) Do not store products in a chemical atmosphere

such as chlorine gas, acid or sulfide gas.

Notice (Soldering and Mounting)

1. Cleaning

Do not clean BNX series (SMD Type).

Before cleaning, please contact Murata engineering.

2. Soldering

Reliability decreases with improper soldering methods.

Please solder by the standard soldering conditions shown in mounting information.

3. Other

Noise suppression levels resulting from Murata's EMI suppression filters EMIFIL r

may vary, depending on the circuits and ICs used, type of noise, mounting pattern, mounting location, and other operating conditions. Be sure to check and confirm in advance the noise suppression effect of each filter, in actual circuits, etc. before applying the filter in a commercialpurpose equipment design.

Handling

• Resin Coating

Using resin for coating/molding products may affect the products performance.

So please pay careful attention in selecting resin.

Prior to use, please make the reliability evaluation with the product mounted in your application set.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

168

C31E.pdf

09.4.20

Block Type EMIFIL

r

Lead Type

!

Caution/Notice

!Caution

Rating

Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance.

Storage and Operating Conditions

<Operating Environment>

1. Do not use products in a chemical atmosphere such as chlorine gas, acid or sulfide gas.

2. Do not use products near water, oil or organic solvents.

<Storage and Handling Requirements>

1. Storage Period

BNX Series should be used within 12 months.

Solderability should be checked if this period is exceeded.

2. Storage Conditions

(1) Storage temperature: -10 to +40˚C

Relative humidity: 30 to 70%

Avoid sudden changes in temperature and humidity.

(2) Do not store products in a chemical atmosphere such as chlorine gas, acid or sulfide gas.

Notice

Notice (Soldering and Mounting)

1. Cleaning

Failure and degradation of a product are caused by the cleaning method. When you clean in conditions that are not in mounting information, please contact

Murata engineering.

2. Soldering

Reliability decreases with improper soldering methods. Please solder by the standard soldering conditions shown in mounting information.

3. Other

Noise suppression levels resulting from Murata's

EMI suppression filters EMIFIL r may vary, depending on the circuits and ICs used, type of noise, mounting pattern, lead wire length, mounting location, and other operating conditions. Be sure to check and confirm in advance the noise suppression effect of each filter, in actual circuits, etc. before applying the filter in a commercial-purpose equipment design.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

169

BNX

Block Type EMIFIL

r

SMD Type

1. Standard Land Pattern Dimensions

BNX022

BNX023

12.5

10.2

9.9

9.6

7.1

6.2

5.3

2.8

2.3

0

B

PSG

CG

CG

CB

CG

Soldering and Mounting

Land Pattern

+ Solder Resist

Land Pattern

Solder Resist

(in mm)

(1) A double-sided print board (or multilayer board) as shown in the left figure is designed, and please apply a soldering Cu electrode with a product electrode to a "Land Pattern", apply resist to a "Land Pattern + Solder Resist" at Cu electrode.

(2) Please drop CG on a ground electrode on the back layer

(the same also in a multilayer case) by the through hole. And a surface grand electrode layer may also take a large area as much as possible.

(3) It is recommended to use a double-sided printed circuit board with BNX mounting on one side and the ground pattern on the other in order to maximize filtering performance, multiple feed through holes are required to maximize the BNX's connection to ground.

(4) The ground pattern should be designed to be as large as possible to achieve maximum filtering performance.

2. Solder Paste Printing and Adhesive Application

When reflow soldering the block type EMIFIL r , the printing must be conducted in accordance with the following cream solder printing conditions.

If too much solder is applied, the chip will be prone to

Series

BNX022

BNX023

Solder Paste Printing

o Guideline of solder paste thickness:

150-200

µ m

12.5

10.2

9.6

7.1

5.3

2.8

2.3

0

B

PSG

CG

CG

CB

CG damage by mechanical and thermal stress from the PCB and may crack.

Standard land dimensions should be used for resist and copper foil patterns.

Adhesive Application

3. Standard Soldering Conditions

(1) Soldering Methods

Use reflow soldering methods only.

Use standard soldering conditions when soldering block type EMIFIL r

SMD type .

In cases where several different parts are soldered, each having different soldering conditions, use those conditions requiring the least heat and minimum time.

Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based solder will deteriorate performance of products.

Flux: o Use Rosin-based flux.

In case of using RA type solder, products should be cleaned completely with no residual flux.

o Do not use strong acidic flux (with chlorine content exceeding 0.20wt%) o Do not use water-soluble flux.

For additional mounting methods, please contact Murata.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

170

C31E.pdf

09.4.20

BNX Block Type EMIFIL

r

SMD Type Soldering and Mounting

(2) Soldering Profile o Reflow Soldering Profile

(Sn-3.0Ag-0.5Cu solder)

BNX022/023

Series

T2

T1

T4

T3

180

150

Pre-heating t1 t2

Limit Profile

Standard Profile

90s

±

30s Time (s)

Heating

Temp. (T1)

Standard Profile

Time. (t1)

Peak

Temperature

(T2)

Cycle of Reflow

220

°

C min.

30 to 60s 250

±

3

°

C

2 times max.

Heating

Temp. (T3)

Limit Profile

Time. (t2)

Peak

Temperature

(T4)

Cycle of Reflow

230

°

C min.

60s max.

260

°

C/10s

2 times max.

(3) Reworking with Solder Iron

The following conditions must be strictly followed when using a soldering iron.

Pre-heating: 150

°

C 60s min.

Soldering iron power output: 100W max.

Temperature of soldering iron tip / Soldering time / Times:

450

°

C max. / 5s max. / 1 time

Do not allow the tip of the soldering iron to directly contact the chip.

For additional methods of reworking with a soldering iron, please contact Murata engineering.

4. Cleaning

Do not clean BNX022/023 series. In case of cleaning, please contact Murata engineering.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

171

BNX

Block Type EMIFIL

r

Lead Type

1. Mounting Hole

Mounting holes should be designed as specified below.

BNX00

p

/01

p

Component Side

ø1.2

(PSG)

(B)

(CG)

(CG)

2.5

±

0.1

(CB)

5.0

±

0.1

7.5

±

0.1

(CG)

Soldering and Mounting

Terminal Layout (Bottom figure)

CG

PSG

CB

CG

B

PSG: Power supply ground

CG: Load circuit ground

CB: Load circuit + Bias

2. Using the Block Type EMIFIL

r

(Lead Type) Effectively

(1) How to use effectively

This product effectively prevents undesired radiation and external noise from going out / entering the circuit by grounding the high frequency components which cause noise problems. Therefore, grounding conditions may affect the performance of the filter and attention should be paid to the following for effective use.

(a) Design maximized grounding area in the P.C. board, and grounding pattern for all the grounding terminals of the product to be connected. (Please follow the specified recommendations.)

(b) Minimize the distance between ground of the P.C. board and the ground plate of the product.

(Recommend unsing the through hole connection between grounding area both of component side and bottom side.)

(c) Insert the terminals into the holes on P.C. board completely.

(d) Don't connect PSG terminal with CG terminal directly.

(See the item 1. Terminal Layout)

P. C. Board Patterns

Use a bilateral P.C. board. Insert the BNX into the P.C.board until the root of the terminal is secured, then solder.

(1) Component Side View

PSG B

PSG

B

CG

CG

CB

CG

(2) Bottom View

B PSG

B PSG

CG CG

CB CG

Shield plate

Copper foil pattern

(2) Self-heating

Though this product has a large rated current, localized selfheating may be caused depending on soldering conditions. To avoid this, attention should be paid to the following:

(a) Use P.C. board with our recommendation on hole diameter / land pattern dimensions, mentioned in the right hand drawing, especially for 4 terminals which pass current.

(b) Solder the terminals to the P.C. board with soldercover area at least 90%. Otherwise, excess selfheating at connection between terminals and P.C. board may lead to smoke and / or fire of the product even when operating at rated current.

(c) After installing this product in your product, please make sure the self-heating is within the rated current recommended.

Recommended Land Pattern

CG

3.2

B

CB

3.2

2.5

5.0

7.5

CG

3.2

PSG

CG

Through holes

ø1.2

(in mm)

Copper foil pattern

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

172

C31E.pdf

09.4.20

3. Soldering

(1) Use Sn-3.0Ag-0.5Cu solder.

(2) Use Rosin-based flux. Do not use strong acidic flux with halide content exceeding 0.2wt% (chlorine conversion value).

(3) Products and the leads should not be subjected to any mechanical stress during the soldering process, or while subjected to the equivalent high temperatures.

(4) Standard flow soldering profile

300

250

200

150

100

50

Pre-heating Soldering

Gradual cooling

(in air)

Soldering temperature

150

°

C

Solder

Sn-3.0Ag-0.5Cu solder

60s min.

Soldering Time

Soldering Temperature Soldering Time

250 to 260˚C 4 to 6s

BNX Block Type EMIFIL

r

Lead Type Soldering and Mounting

4. Cleaning

Clean the block Type EMIFIL r (Lead Type) in the following conditions.

(1) Cleaning temperature should be limited to 60

°

C max.

(40

°

C max for alcohol type cleaner).

(2) Ultrasonic cleaning should comply with the following conditions, avoiding the resonance phenomenon at the mounted products and P.C.B.

Power: 20W/liter max.

Frequency: 28 to 40kHz

Time: 5 min. max.

(3) Cleaner

(a) Alcohol type cleaner

Isopropyl alcohol (IPA)

(b) Aqueous agent

Pine Alpha ST-100S

(4) There should be no residual flux or residual cleaner left after cleaning.

In the case of using aqueous agent, products should be dried completely after rinsing with de-ionized water in order to remove the cleaner.

(5) The surface of products may become dirty after cleaning, but there is no deterioration on mechanical, electrical characteristics and reliability.

(6) Other cleaning: Please contact us.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

173

BNX

Block Type EMIFIL

r

SMD Type

Minimum Quantity and Dimensions of 24mm Width Embossed Tape

Packaging

4.0

±

0.1

4.0x10pitch=40.0

±

0.2

2.0

±

0.1

12.0

±

0.1

ø1.5

+0.1

-0 c: 3.3

±

0.1

c: Depth of Cavity

3

°

max.

b: 9.4

±

0.1

ø1.5

+0.5

-0

0.3

±

0.1

Part Number

BNX022/023

Cavity Size a b c

12.4

9.4

3.3

Minimum Qty. (pcs.)

ø180mm Reel ø330mm Reel

400 1500

Bulk

100

(in mm)

"Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity".

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

174

C31E.pdf

09.4.20

BNX

Block Type EMIFIL

r

Design Kits

No.

7

8

5

6

3

4

1

2 o

EKEPBNX0A

Part Number

BNX002-01

BNX012-01

BNX016-01

BNX012H01

BNX022-01

BNX023-01

BNX024H01

BNX025H01

Quantity

(pcs.)

3

3

3

3

1

1

1

1

Insertion Loss

1MHz to 1GHz : 40dB min.

1MHz to 1GHz : 40dB min.

100kHz to 1GHz : 40dB min.

1MHz to 1GHz : 40dB min.

1MHz to 1GHz : 35dB min.

1MHz to 1GHz : 35dB min.

100kHz to 1GHz : 35dB min.

50kHz to 1GHz : 35dB min.

Rated Voltage

(Vdc)

50

100

50

25

50

50

25

50

Rated Current

(A)

10

15

15

15

10

15

15

15

Insulation Resistance

(M

min.)

100

500

50

500

500

500

100

50 o

EKEPBLCKA

No.

7

8

5

6

3

4

1

2

9

10

11

Part Number

BNX002-01

BNX003-01

BNX005-01

BNX012-01

BNX016-01

BNX012H01

BNP002-02

BNX022-01

BNX023-01

BNX024H01

BNX025H01

Quantity

(pcs.)

1

3

1

1

1

1

1

1

3

3

3

Insertion Loss

1MHz to 1GHz : 40dB min.

5MHz to 1GHz : 40dB min.

1MHz to 1GHz : 40dB min.

1MHz to 1GHz : 40dB min.

100kHz to 1GHz : 40dB min.

1MHz to 1GHz : 40dB min.

20MHz to 500MHz : 40dB min.

1MHz to 1GHz : 35dB min.

1MHz to 1GHz : 35dB min.

100kHz to 1GHz : 35dB min.

50kHz to 1GHz : 35dB min.

Rated Voltage

(Vdc)

25

50

50

50

50

150

50

50

100

50

25

Rated Current

(A)

15

15

10

10

10

10

15

15

15

15

15

Insulation Resistance

(M

min.)

100

100

100

500

50

500

1000

500

500

100

50 o EKEMDCC5B (Chip Common Mode Choke Coils for DC Power Line / SMD Block type EMIFILr for Power Line)

No.

5

6

7

3

4

1

2

8

9

10

11

Part Number

DLW5AHN402SQ2

DLW5BSN191SQ2

DLW5BSN351SQ2

DLW5BSN102SQ2

DLW5BSN152SQ2

DLW5BSN302SQ2

DLW5BTN101SQ2

DLW5BTN251SQ2

DLW5BTN501SQ2

DLW5BTN102SQ2

DLW5BTN142SQ2

Quantity

(pcs.)

5

5

5

5

5

5

5

5

5

5

5

Common Mode Impedance

(at 100MHz, 20 degrees C)

4000

(Typ.)

190

(Typ.)

350

(Typ.)

1000

(Typ.)

1500

(Typ.)

3000

(Typ.)

100

(Typ.)

250

(Typ.)

500

(Typ.)

1000

(Typ.)

1400

(Typ.)

Rated Voltage

(Vdc)

50

50

50

50

50

50

50

50

50

50

50

Rated Current

(mA)

200

5000

2000

1500

1000

500

6000

5000

4000

2000

1500

Insulation Resistance

(M

min.)

10

10

10

10

10

10

10

10

10

10

10

No.

12

13

Part Number

BNX022-01

BNX023-01

Quantity

(pcs.)

5

5

Insertion Loss

1MHz to 1GHz: 35dB min.

1MHz to 1GHz: 35dB min.

Rated Voltage

(Vdc)

50

100

Rated Current

(A)

10

15

Insulation Resistance

(M

min.)

500

500

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

175

Memo

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

176

C31E.pdf

09.4.20

EA

Microwave Absorber

Part Numbering

Product Detail

Notice

178

179

182

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

177

EA

Microwave Absorber

Part Numbering

(Part Number)

EA

q

1026

w

A

e

160

r

M

t

200

y

200

u qProduct ID

Product ID

EA

Microwave Absorber wSheet Type

Code

10

pp

2070

2100

2200

3008

Sheet Type

Iron carbonyl type (UL certified type/non Halogen type)

Metal Flake Powder (non Halogen type)

Metal Flake Powder (UL certified type)

Metal Flake Powder (UL certified type/non Halogen type)

Magnetic material (UL certified type/non Halogen type) eAdhesive Tape Type

Code

A

B

Adhesive Tape Type

Standard tape type (non Halogen type)

Thin Adhesive tape type (non Halogen type)

L

U

No tape type

UL certified type (non Halogen type) rSheet Thickness

Expressed by 3 digits including the second decimal place in mm.

Ex.)

Code

020

Sheet Thickness

0.20mm

tUnit of Dimension

One capital lettler expresses Unit of Dimension ( y) and

Dimensions Length ( u).

Code

M

C

Standard shape is a rectangle.

Please contact us for other shapes.

Unit of Dimension

in mm (Standard) in cm (Standard) yDimension (Length)

Expressed by 3 digits including the first decimal place.

uDimension (Width)

Expressed by 3 digits including the first decimal place.

Ex.)

Code

M300150

C150100

Dimension (Length g Width)

30.0g15.0 mm

15.0g10.0 cm

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

178

C31E.pdf

09.4.20

EA Series Microwave Absorber

EA10

Series

Packaging

When inquiring, please contact us with size code, refering to "Part Numbering".

Rated Value

Part Number

EA1026A100

EA1026A160

EA1026A180

EA1046A180

EA1075A270

Applicable Frequency (Typ.) Thickness (Typ.)

20.0GHz

11.5GHz

10.0GHz

5.8GHz

2.5GHz

1.0mm

1.6mm

1.8mm

1.8mm

2.7mm

Reflection Loss (Typ.)

0

5

10

15

20 EA1026A100

25

30

EA1075A270

EA1046A180

EA1026A180

EA1026A160

35

40

0 2 4 6 8 10 12

Frequency (GHz)

14 16 18 20

Flame Class

UL94V-0

UL94V-0

UL94V-0

UL94V-0

UL94V-0

Halogen

Halogen Free

Halogen Free

Halogen Free

Halogen Free

Halogen Free

Operating Temperature Range

-40 to +80

°

C

-40 to +80

°

C

-40 to +80

°

C

-40 to +80

°

C

-40 to +80

°

C

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

179

EA Series Microwave Absorber

EA20

/

EA21

/

EA22

Series

Packaging

When inquiring, please contact us with size code, refering to "Part Numbering".

Rated Value

Part Number

EA2070A020

EA2070A050

EA2070A100

EA2070B005

EA2070B010

EA2070B013

EA2070B020

EA2070B050

EA2100A020

EA2100A050

EA2100A100

EA2100B020

EA2100B050

EA2100B100

EA2200A010

EA2200A020

EA2200A050

EA2200A100

EA2200B010

EA2200B020

EA2200B050

EA2200B100

Applicable Frequency (Typ.) Thickness (Typ.)

0.1 to 3.0GHz

0.1 to 3.0GHz

0.1 to 3.0GHz

0.1 to 3.0GHz

0.1 to 3.0GHz

0.1 to 3.0GHz

0.1 to 3.0GHz

0.1 to 3.0GHz

0.1 to 3.0GHz

0.1 to 3.0GHz

0.1 to 3.0GHz

0.1 to 3.0GHz

0.1 to 3.0GHz

0.1 to 3.0GHz

0.1 to 3.0GHz

0.1 to 3.0GHz

0.1 to 3.0GHz

0.1 to 3.0GHz

0.1 to 3.0GHz

0.1 to 3.0GHz

0.1 to 3.0GHz

0.1 to 3.0GHz

0.20mm

0.50mm

1.00mm

0.05mm

0.10mm

0.13mm

0.20mm

0.50mm

0.20mm

0.50mm

1.00mm

0.20mm

0.50mm

1.00mm

0.1mm

0.2mm

0.5mm

1.0mm

0.1mm

0.2mm

0.5mm

1.0mm

Magnetic Permeability-Reluctance

20

Flame Class

UL94V-0

UL94V-0

UL94V-0

UL94V-0

UL94V-0

UL94V-0

-

-

-

-

-

-

-

-

UL94V-0

UL94V-0

UL94V-0

UL94V-0

UL94V-0

UL94V-0

UL94V-0

UL94V-0

Halogen

Halogen Free

Halogen Free

Halogen Free

Halogen Free

Halogen Free

Halogen Free

Halogen Free

Halogen Free

-

-

-

-

-

-

Halogen Free

Halogen Free

Halogen Free

Halogen Free

Halogen Free

Halogen Free

Halogen Free

Halogen Free

Operating Temperature Range

-40 to +120

°

C

-40 to +120

°

C

-40 to +120

°

C

-40 to +120

°

C

-40 to +120

°

C

-40 to +120

°

C

-40 to +120

°

C

-40 to +120

°

C

-40 to +120

°

C

-40 to +120

°

C

-40 to +120

°

C

-40 to +120

°

C

-40 to +120

°

C

-40 to +120

°

C

-40 to +120

°

C

-40 to +120

°

C

-40 to +120

°

C

-40 to +120

°

C

-40 to +120

°

C

-40 to +120

°

C

-40 to +120

°

C

-40 to +120

°

C

16

µ

"

12

8

4

0

0.1

1.0

Frequency (GHz)

10

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

180

C31E.pdf

09.4.20

EA Series Microwave Absorber

EA30

Series

Packaging

When inquiring, please contact us with size code, refering to "Part Numbering".

Rated Value

Part Number

EA3008U025

EA3008U035

EA3008U050

EA3008U100

EA3008U250

Applicable Frequency (Typ.) Thickness (Typ.)

0.1 to 3.0GHz

0.1 to 3.0GHz

0.1 to 3.0GHz

0.1 to 3.0GHz

0.1 to 3.0GHz

0.25mm

0.35mm

0.50mm

1.00mm

2.50mm

Magnetic Permeability-Reluctance (Typ.)

10

8

6

µ

'

4

2

0

0.1

µ

"

1

Frequency (GHz)

10

Flame Class

UL94V-0

UL94V-0

UL94V-0

UL94V-0

UL94V-0

Halogen

Halogen Free

Halogen Free

Halogen Free

Halogen Free

Halogen Free

Operating Temperature Range

-40 to +120

°

C

-40 to +120

°

C

-40 to +120

°

C

-40 to +120

°

C

-40 to +120

°

C

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

181

Microwave Absorber

Notice

Storage and Operating Conditions

1. Adhesive Tape Stress

This product is designed for using the adhesive tape to hold itself to the object.

And please avoid causing mechanical stress by bending or variation of the object.

Flat cable

Products shall be located in the sideways direction to the mechanical stress.

Notice

Product poor example

Stress good example

2. Cleaning

Avoid cleaning product.

3. Handling of the Product

Adhesive tape must be clean to maintain the quality of tape.

And please wipe off any dirt, dust and any kind of oil from the surface of the object before use.

4. Storage Conditions

(1) Storage Period

Products which were inspected in Murata over 6 months ago should be examined and used. This can be confirmed with inspection No. marked on the container.

Adhesiveness should be checked if this period is exceeded.

(2) Storage Conditions

· Products should be stored in the warehouse on the following conditions.

Temperature: -10 to +40˚C

Humidity: 30 to 70% relative humidity

No rapid change on temperature and humidity

· Products should be stored in the warehouse without heat shock, vibration, direct sunlight and so on.

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

182

C31E.pdf

09.4.20

Which Size?

inch (mm)

Inductor Type

Simple

Capacitor

Capacitor Type

LC(RC)

Combined

T Circuit Filter

Feed Through

Type

Common

Mode

Choke Coils

01005 (0402)

0201 (0603)

03025 (0806)

0402 (1005)

BLM15A

BLM15B

BLM15P

BLM15HG

BLM15HD

p23 p35 p51 p65 p65

BLM15HB

BLM15EG

BLM15GG

BLM15GA

p65 p71 p74 p74

0504 (1210)

BLM02A

BLM03A

BLM03B

BLM03P

p20 p21 p33 p50

DLP0NS

p142

DLM11G

DLP11S

p140 p143

0603 (1608)

BLM18A

BLM18B

BLM18T

BLM18R

BLM18P

BLM18K

BLM18S

p28 p38 p32 p45 p53 p61 p63

BLM18HG

BLM18HE

BLM18HD

BLM18HB

BLM18HK

BLM18EG

BLM18GG

p67 p67 p67 p67 p67 p72 p75

Array

0804 (2010)

Array

0805 (2012)

Array

1008 (2520)

1205 (3212)

BLA2AA

BLA2AB

BLM21A

BLM21B

p76 p76 p30 p42

BLM21R

BLM21P

p47 p55

1206 (3216)

Array

2014 (5036)

2020 (5050)

2220 (5750)

2706 (6816)

BLM31P

1806 (4516)

BLA31A

BLA31B

BLM41P

p57 p79 p79 p59

NFM18C

NFM18P

p100 p105

NFL18ST

NFL18SP

p114 p115

NFA18S

p117

DLP2AD

p146

NFM21C

NFM21P

p101 p107

NFL21S

NFR21G

NFA21S

p116 p123 p119

DLW21S

DLW21H

p148 p150

DLM2HG

p141

NFM3DC

NFM3DP

p102 p108

NFM31P

p109

NFW31S

p121

NFE31P

p112

NFA31C

NFA31G

p104 p124

NFM41C

NFM41P

p103 p110

DLP31S

DLW31S

DLP31D

p145 p151 p147

DLW5AH

p152

DLW5BS

DLW5BT

p152 p153

NFM55P

p111

NFE61P

p113

Block Type

LgWgT(mm)

12g11gmax18

p166

BNX002-01

BNX003-01

Lead

12g11gmax18.5

p166

BNX005-01

Lead

12g11g12

p167

BNX012-01

BNX016-01

Lead

9.1g12.1g3.1

p165

BNX022-01

BNX023-01

SMD

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

183

BLp Series

BLA2AA

BLA2AB

BLA31A

BLA31B

BLM02A

BLM03A

BLM03B

BLM03P

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

BLM15AG

a a a a a a a a a a a

BLM15AG_AN

a a a a a a a

BLM15AX

BLM15B

a a a a a a a a a a a a a a a a a a a a a a a

BLM15EG

BLM15GA

a a a a a a a a a a a a a a a a a a a a a a

BLM15GG

a a a a a a a a a a a

BLM15HB

a a a a a a a a a a a

BLM15HD

a a a a a a a a a a a

BLM15HG

a a a a a a a a a a a

BLM15P

BLM18A

a a a a a a a a a a a a a a a a a a a a a a a a

BLM18B

BLM18EG

a a a a a a a a a a a a a a a a a a a a a a a

BLM18GG

a a a a a a a a a a a

BLM18HB

a a a a a a a a a a a

BLM18HD

a a a a a a a a a a a

BLM18HE

a a a a a a a a a a a

BLM18HG

a a a a a a a a a a a

BLM18HK

BLM18K

a a a a a a a a a a a a a a a a a a a a a a a

BLM18P

BLM18R

BLM18S

BLM18T

BLM21A

BLM21B

BLM21P

BLM21R

BLM31P

BLM41P

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

p67 p67 p67 p67 p61 p53 p45 p63 p65 p65 p51 p28 p38 p72 p75 p67 p32 p30 p42 p55 p47 p57 p59 p23 p25 p26 p35 p71 p74 p74 p65 p76 p76 p79 p79 p20 p21 p33 p50

NFp Series

NFA18S

NFA21S

a a a a a a a a a a a a a a a a a a a a a a a a

NFA31C

a a a a a a a a a a a a

NFA31G

a a a a a a a a a a a a

NFE31P

NFE61P

a a a a a a a a a a a a a a a a a a a a a a a a

NFL18SP

a a a a a a a a a a a

NFL18ST

NFL21S

a a a a a a a a a a a a a a a a a a a a a a a

NFM18C

NFM18PS

a a a a a a a a a a a a a a a a a a a a a

NFM18PC

NFM21C

a a a a a a a a a a a a a a a a a a a a a

NFM21P

NFM31P

a a a a a a a a a a a a a a a a a a a a a a

NFM3DC

NFM3DP

NFM41C

NFM41P

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

NFM55P

NFR21G

NFW31S

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

p116 p100 p105 p106 p101 p107 p109 p102 p117 p119 p104 p124 p112 p113 p115 p114 p108 p103 p110 p111 p123 p121

DLp Series

DLM11G

DLM2HG

a a a a a a a a a a a a a a a a a a a a a a

DLP0NS

a a a a a a a a a a a a

DLP11S

a a a a a a a a a a a a

DLP2AD

a a a a a a a a a a a a

DLP31D

DLP31S

a a a a a a a a a a a a a a a a a a a a a a a a

DLW21H

DLW21S

DLW31S

DLW5AH

DLW5BS

DLW5BT

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

p140 p141 p142 p143 p146 p147 p145 p150 p148 p151 p152 p152 p153

BNX Series

BNX002

BNX003

BNX005

BNX012

BNX016

BNX022

BNX023

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

p166 p166 p166 p167 p167 p165 p165

EA Series

EA10

EA20

EA21

EA22

EA30

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

p179 p180 p180 p180 p181

3 Terminal Filter

Block Type EMIFILr LC Combined Type

Chip Common Mode Choke Coil Film Type

Chip Common Mode Choke Coil Film Type Array

Chip Common Mode Choke Coil Multilayer Type

Chip Common Mode Choke Coil Wire Wound Type

Chip Common Mode Choke Coil Wire Wound Type For Large Current

Chip EMIFILr Array

Chip EMIFILr Capacitor Type

Chip EMIFILr Capacitor Type Array

Chip EMIFILr Feed Through Type

Chip EMIFILr For Large Current

Chip EMIFILr Inductor Type

Chip EMIFILr LC Combined Multilayer Type

Chip EMIFILr LC Combined T Circuit Type

Chip EMIFILr LC Combined Type

Chip EMIFILr LC Combined Type Array

p91 p165 p142 p146 p140 p148 p152 p76.79.104.117.119.124

p91 p104 p112 p50.105.112.152.165

p11 p114.117

p112.114

p112 p117

Chip EMIFILr LC Combined Wire Wound Type

Chip EMIFILr RC Combined Type

Chip EMIFILr RC Combined Type Array

Chip Ferrite Bead

Chip Ferrite Bead Array

Chip Ferrite Bead For GHz Band Noise

Chip Ferrite Bead For High-GHz Band Noise

Common Mode Filter

EMC Absorber

EMI Suppression Filter

EMIFILr

L Circuit Filter

LC Combined L Circuit Array

Microwave Absorber

PI Circuit Filter

T Circuit Filter

p121 p123.124

p124 p11 p76 p65 p74 p135 p177 p11.91.135.161

p11.91.135.161

p117 p117 p177 p115.116.121

p112.114

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

184

C31E.pdf

09.4.20

Select circuit.

(Select a new simulation circuit from File menu.)

Enter

"Input Signal".

New products are available

Simulation results with various charts are quickly displayed on your PC.

Results can be displayed in standard format or user defined scaling.

Simulates various types of circuits such as Differential Mode Transmission, ceramic

capacitor, EMIFIL

r

, three terminal capacitor and chip ferrite beads.

Provides a simulation function that selects best suited Chip EMIFIL

r

.

Select circuit.

Set Driver IC.

Select a new simulation circuit from File menu.

Select filter.

(EMI filters or/and chip capacitor from the pulldown list.)

Set

Transmission

Line.

Set

Receiver IC.

Click measuring point.

(Only for chip ferrite bead)

Click

"Start

Simulation" button.

Simulation results are displayed.

Filters can be selected from

"frequency-impedance characteristics" charts.

Simulation results are shown in the window.

Two ways of setting the driver/receiver IC parameter

The logic IC of TTL and CMOS can be selected from pull-down list or the LCR values can also be created.

Impedance automatically calculated.

Impedance characteristics of transmission line are automatically calculated.

This button allows you to see more information at web catalog.

(Need connection to the Internet)

EMIFIL r

is the trademark of Murata Manufacturing Co., Ltd.

This simulator can be downloaded from Murata's website.

http://www.murata.com/designlib/mefss/

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

185

Introduction of Related Catalogs: Ferrite Core/Lead Type EMIFIL

r

Please refer to catalogs below for ferrite cores and leaded EMIFILr.

Ferrite Core

Ferrite Core for EMI Suppression

Contents Thin Type Sandwich Core <FSSA>

Core for Flat Cables <FSRC>

Plate Core <FSSA>

Beads Core <FSRH>

Ring Core <FSRB>

Multi Hole Core <FSMA/FSSA>

Lead Type EMIFILr

EMI Suppression Filters (Lead Type EMIFILr))

Contents

Ferrite Beads Inductors <BL01/02/03>

Disc Type EMIFILr<DSp6/DSp9>

EMIGUARDr(EMIFILr with Varistor Function)

<VFp3/VFp6/VFp9>

Common Mode Choke Coils <PLT>

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

186

C31E.pdf

09.4.20

Cat. No. C31E-21

!

Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

C31E.pdf

09.4.20

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project