Lens mounts for 3mm and 5mm LEDs Specifications:

Lens mounts for 3mm and 5mm LEDs Specifications:
55-0950:Layout 1
7/5/14
14:19
Page 1
Lens mounts for
3mm and 5mm LEDs
Specifications:
Material:
• Lense: Polycarbonate
• Spacer: Nylon
(U.L. Listed Materials).
Design:
• Standard and low profile lenses with fresnel rings and striated lines. A 5mm Low Profile Lens
is available without fresnel rings.
Mounting:
• Mounts through front of panel. Mounting holes should be deburred but not chamfered.
3mm (A, C) mounts in a 0.171 ± 0.002 (4.34mm) hole on 1 ⁄4in centers. Panel thickness
for A = 1 ⁄32in to 1 ⁄16in; C = 1 ⁄16in to 1 ⁄8in. 5mm (B, D) mounts in a 0.250 ± 0.002 (6.35mm)
hole on 3 ⁄8in centers. Panel thickness for B = 1 ⁄16in to 1 ⁄8in; D = 1 ⁄32in to 1 ⁄4in; for panels
less than 3 ⁄16in, use E spacer.
Simple 2-step installation:
Recommended LEDs
Outline drawings:
www.rapidonline.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement