Produktinformation Essential/Phono USB

Produktinformation Essential/Phono USB
Produktinformation
Essential/Phono USB
Manual turntable with fitted cartridge
Ortofon OMB 3E and
integrated MM phono pre-amplifier with
A/D converter and USB output
Turntable
Chassis available in red, white and black
A quiet running synchronous motor with a two-step pulley drives the platter's outside edge via a silicon belt.
The particle board plinth stands on three feet which act as shock absorbers.
The resonance-optimised platter is made of particle board and a felt mat.
A chrome-plated stainless-steel axle runs on a polished metal ball in a sintered bronze bearing housing.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 8.6up
The turntable is supplied with Ortofon OMB 3E MM-cartridge fitted.
The headshell and undamped armtube are fashioned from a single piece.
The uni pivot bearings consist of a hardened steel point bearing and a hardened and polished steel pad.
Eccentrically mounted counterweight reduces cantilever forces and dynamic wow when playing
warped records.
The counterweight supplied is suitable for cartridges weighing between 4 - 9g
The internal wiring consists of high-grade flexible copper from the headshell right through to the connection cable.
A supplied 3,5 mm connector can be used to connect your Pro-Ject Debut III / Phono to any line level/auxiliary
input (Computer, Midi System, Mixer etc.).
Dimensions W x H x D: With dust cover closed 415 x 112 x 335mm, dust cover open 415 x 365 x 390mm.
Cartridge: Output voltage 4mV. Recommended load resistance 47kohms (MM-input).
Phono Pre-amplifier
Optimal channel separation through dual-mono circuitry
Digitalisation of analogue signals for recording direct to disk via USB with suitable recording programs
Runs on Windows™ and Mac OS™operating systems
Technical specifications Phono Pre-amplifier - A/D converter
Noise floor:
THD:
Input impedance:
Power consumption:
Gain:
Output voltage typically:
RIAA-equalisation curve accuracy:
USB output:
88dB
0,005%
47kohms/100pF
16V/40mA AC
32dB
160mV/1kHz at 4mV/1kHz
> 0,5dB/20Hz - 20kHz
digital serial data protocol USB 1.1
The manufacturer reserves the right to alter the technical specifications without notice.
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.
!
24
The unit may only be connected to a line level input.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 1.6.10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement