Catalogue Sheet: LPEX54 Series

Catalogue Sheet: LPEX54 Series
Project/Location:
Contractor:
LPEX54 Series
Date:
Recessed Exit Sign
Prepared by:
Typical specifications
Features
• Extruded aluminum faceplate with overlapping trim is standard
Supply and install the Emergi-Lite® LPEX54 Series Exit Sign.
The LPEX54 exit shall be recessed mount. The equipment shall
operate with universal AC input voltage of 120, 277 or 347VAC at less
than 1.5W and universal two wire DC input voltage from 6VDC to
24VDC at less than 1.5W. The face shall be constructed of extruded
aluminum and have an overlapping trim allowing for installation
in any location. The faceplate shall come standard with knockout
chevrons. The recessed back box shall be of rugged steel construction. The light source shall be light emitting diodes (LED). Red LED
technology shall be ALINGAP. The LED lamps shall provide illumination in normal and emergency operation and shall be mounted inside
the exit housing, not on the face. An LED sensitive diffuser shall
be mounted behind the legend to provide the 6” high by 3/4” stroke
letters with even illumination.
• Universal, field-selectable chevrons (knockout)
• Long-life, energy-efficient ALINGAP LED light source
• Indirect refractive technology provides bright, even illumination
• Normal AC and emergency DC operation –
120 to 347V universal AC input;
6 to 24V two-wire DC input
• Energy efficient – consumes less than 3.5W in AC or DC mode
• Nickel-Cadmium battery provides at least 90 minutes of
emergency operation in DC mode
• CSA certified, meets or exceeds CSA 22.2 No. 141 requirements
The Exit Sign in a Self-Powered configuration shall be equipped
with a Nickel-Cadmium battery and shall stay illuminated during
emergency operation for at least 90 minutes upon AC failure.
Dimensions
Dimensions are approximate and subject to change.
123/4” [32.4 cm]
21/2” [6.5 cm]
The Exit Sign shall be CSA-C860 approved and meets CSA 22.2 No.141
2 ” [5.7 cm]
The equipment shall be Emergi-Lite® Model:
.
71/2” [19 cm]
87/8” [22.7 cm]
1/4
Wire guards
460.0091-E
143/4” [37.5 cm]
Wall Mount
POwer consumption
Model
AC Specs
DC Specs
AC/ standard DC, red
120/277/347VAC
Less than 1.5W
6 to 24VDC
Less than 1.5W
AC/ special DC, red
120/277/347VAC
Less than 3W
36 or 48 or 120VDC
Less than 2.5W
Minimum 90 minutes
Self-Powered, red
120 to 347VAC
Less than 3W
Nickel-Cadmium
battery
AC/ standard DC, green
120 to 347VAC
Less than 1.5W
6 to 24VDC
Less than 1.5W
Self-Powered, green
120 to 347VAC
Less than 3.5W
Nickel-Cadmium
battery
Minimum 90 minutes
ordering information
Series
LPEX54= LED
aluminum
recessed
EXIT
colour
W= factory white
B= black
BA= brushed aluminum
TA= textured aluminum
voltage
-U= 120/277/347VAC, 6 to 24VDC
-EM120-2W= 120VAC, 120VDC 2 wires
-U36= 120/277/347VAC - 36VDC
-U48= 120/277/347VAC - 48VDC
-U120= 120/277/347Vac - 120VDC
-I= 120 to 347VAC Self-Powered
options
-TP= tamper-proof screws*
-VRTP= vandal resistant shield and tamper-proof screws*
-G= green legend
990.0119-E= tamper-proof bit**
*Indicate single or double face.
**One bit needed per order.
EXAMPLE: LPEX54B-U-VRTP
37
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement