CMCP5304 4 Channel General Machinery Monitor •

CMCP5304 4 Channel General Machinery Monitor •
Vibration Monitoring and Machine Protection Systems
1010 East Main Street, League City, TX 77573 Phone:281.334.0766 Fax: 281.334.4255 /
Condition Monitoring Custom Products
4 Channel General Machinery Monitor
The CMCP5304 is a four channel Vibration Monitor
that has been designed for use on typical rotating
machinery such as motors, pumps fans, turbines,
compressors, chillers., etc.
The CMCP5304 accepts inputs from any industry
standard 100 mV/g accelerometer, condition’s the
input signals to velocity and provides a digital
display and alarm status indication.
Analog outputs (4-20 mA) are provided for each
channel for interface to a PLC or DCS for trending,
alarm and operator interface.
The CMCP5304 alarm contacts for the OK circuit,
and Alert and Danger may be interfaced to machine
control and shutdown systems for a complete
vibration protection solution.
The system is a pre-wired turn-key package with
panduit, power supply, bright LED display, channel
selector switch and reset button. The power supply
accepts 110 or 220 VAC, 50 or 60 Hz. The
CMCP5304 is available in either an English or Metric
The standard housing is polyester powder coated
steel; rated NEMA 12. An optional Stainless Steel
enclosure is rated NEMA 4X.
Two Levels of Alarm with Relays
True “OK” Circuitry with Relay
Adjustable Time Delays
Trip Multiply
4-20mA Output
Buffered Transducer Output
Reset Button
Bright LED Digital Readout
Electrical Specifications:
Power: Accepts 110 VAC or 220 VAC, 60 or 50 Hz
Frequency Response: (-3 dB) 2 Hz to 20 kHz.
Buffered Output: BNC Connector 0-20 kHz.
Accuracy: 5.0 % of Full Scale Range.
Output: 4-20 mA proportional to the full scale range.
Maximum Load: 600 Ohms Resistive per channel
Case: Isolated.
Environmental Specifications:
Operating Temp.: -20oC to +80oC (-4oF to +176oF).
Storage Temp.: -55oC to +125oC (-67oF to +257oF).
Relative Humidity: 0 - 95% Non-Condensing.
Approvals: NEMA 12, EEMAC, UL508, CSA Type 4,
VDE IP66, IEC 529, IP66
Physical Specifications:
Dimensions: 200 mm H x 400 mm W x 150 mm D
(7.87” H x 15.75” W x 5.90” D)
Weight: 6.80 Kg (15 lbs)
Ordering Information:
4 Channel, 0-1 in/sec PK
4 Channel, 0-25 mm/sec RMS
4 Channel, 0-1 in/sec PK,
Stainless Steel Enclosure
4 Channel, 0-25 mm/sec RMS,
Stainless Steel Enclosure
Wing Knob Latch with Key
Foot Mounting Kit
To Order Online Please Visit
Rev. 6/10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF