PS-FST80x_v1.0
Product Specification of FST-80x
Confidential
Product Specification
10/100Base-TX to 100Base-FX
Smart Fast Ethernet Media Converter
FST- 80x
Version 1.0
This document contains confidential proprietary information and is property of PLANET. The contents of this
document should not be disclosed to unauthorized persons without the written consent of PLANET.
Change History:
Revision
Version 1.0
Author
Reviewed by:
Date
2006/11/20
Marc Liao
Kent Kang
Filename: PS-FST80x_v1.0.doc
Author
Marc Liao
Editor:
Approved by:
Page 1 of 6
Change List
Initial release
Marc Liao
Tom Shih
Printed on 12/4/2006
Product Specification of FST-80x
Confidential
1. PRODUCT DESCRIPTION
The FST-80x series Smart Media Converter provide Media conversion between 10/100Base-TX and 100Base-FX
interfaces, such as multi-mode ST/SC connectors(2km), single-mode SC connector(15/35/50km) and single fiber
connector(WDM,20km) fiber connection options for various application.
The FST-80x series Smart Media Converter provide Auto MDI/MDI-X on its TP port and store-and-forward mechanism
for eliminate faulty packets. Use the DIP switch from the FST-80x to configure the available smart functions, such as
the half / full duplex, auto-negotiation / force and 10/100Mbps options for TP and fiber interface. Also the LLR and
LLCF function can immediately alarm network administrator the media link issue and provide efficient solution to
monitor the entire network.
The FST-80x series Smart Media Converter can allow two type segments connect easily with efficiently and cost
effective, these Smart Media converter can be use us a standalone unit when it power on by it’s DC adapter. Or use as
a slide-in module to the PLANET 19-inch Web Smart 16-Slots Media converter chassis (MC-1600MR/MC-1600MR48),
with this Web Smart Media converter chassis, the FST-80x able to manage and status monitor through the local
RS-232 console and remote web interface.
2. PRODUCT FEATURES

Complies with IEEE 802.3, 10Base-T, IEEE 802.3u, 100Base-TX and 100Base-FX Ethernet standard

Provides one 10/100Base-TX port with RJ-45 connector, one 100Base-FX port with ST/SC/WDM connector
supporting multi-mode or single-mode fiber optic cable

LED indicators for converter status

Provide DIP switch to setting fiber( HDX/FDX), UTP( Auto-negotiation / Manual), speed(10/100Mbps), duplex
mode(Half / Full duplex mode), LLR( Disable / Enable), LLCF( Disable / Enable)

Auto-MDI / MDI-X for 10/100Base-TX port

Store-and-Forward mechanism

Back-pressure & IEEE 802.3x compliant flow control and full wire-speed forwarding rate

Link Loss Return( LLR) switch on each fiber optic to aid in troubleshooting remote network connections

Link Loss Carry Forward( LLCF) work with LLR in diagnosing network connections

Manageable through Web Smart Media Converter Chassis System

Used as a stand-alone device or with a chassis for up to 16 converter with redundant power supply for optional
expansion use

EMI standards complies with FCC, CE class B
3. PRODUCT SPECIFICATION
3.1 MAIN COMPONENT
Microcontroller:
Winbond W78L054C
x1
Media converter chip:
IC Plus IP113M
x1
Fiber-optic transceiver:
Vary by models
x1
Filename: PS-FST80x_v1.0.doc
Page 2 of 6
Printed on 12/4/2006
Product Specification of FST-80x
Confidential
3.2 FUNCTIONAL SPECIFICATIONS
Model
FST-801
FST-802
FST-802S15
FST-802S35
FST-802S50
FST-806A20
FST-806B20
Hardware Specification
Standards
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX and 100Base-FX
Ports
1 10/100Base-TX port , 1 100Base-FX port
Fiber
ST
SC
SC
SC
SC
SC, WDM
SC, WDM
connector
Wavelength
1310nm (Transmit and Receive)
1310 (TX)
1550 (TX)
Deployment
1550 (RX)
1310 (RX)
Cable
10Base-T: 2-pair Cat. 3,4,5 UTP cable, up to 100 meters
100Base-TX: 2-pair Cat. 5 UTP cable, up to 100 meters
100Base-FX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 2km. 9/125μm single-mode cable,
provide long distance for 15/20/35/50km
Maximum
MM, 2km MM, 2km SM, 15km
SM, 35km
SM, 50km
SM, 20km
SM, 20km
Cable
Single wire
Single wire
distance
LED indicator
System: PWR
TP: LNK/ACT, FDX/COL, 100
FX: LNK/ACT, FDX/COL
DIP switch
Fiber (HDX/FDX), UTP (Auto-negotiation / Manual), speed (10/100Mbps), duplex mode (Half / Full
duplex mode), LLR (Disable / Enable), LLCF (Disable / Enable)
Speed
Ethernet: 10/20Mbps for half / full-duplex
Fast Ethernet: 100/200Mbps for half / full-duplex
3.3 PHYSICAL SPECIFICATION
■
Dimensions
81 x 94 x 26 mm (W x D x H)
■
Weight:
220g
Filename: PS-FST80x_v1.0.doc
Page 3 of 6
Printed on 12/4/2006
Product Specification of FST-80x
Confidential
■
Right view
There is one RJ-45 twisted-Pair jack (Auto-MDI/MDI-X), one fiber-optic connector (vary by model) and six LED
indicators.
■
Left view
There is one DC jack for DC 5V power adapter.
10/100Base-TX
LNK FDX
ACT COL
TP
100
FX
PWR
Fast Ethernet Bridge 10/100Base-TX to 100Base-FX
RX
TX
100Base-FX
LED Indicators
LED
Color
PWR(Power)
Green
TP Speed (100Mbps)
Green
TP FDX/COL
Green
TP LINK/ACT
Green
FX FDX/COL
Green
FX LINK/ACT
Green
Filename: PS-FST80x_v1.0.doc
Status
Indication
Lights On
Lights Off
Lights On
Lights Off
Lights On
Lights Off
Lights Blinking
Lights On
Lights Off
Lights Blinking
Lights On
Lights Off
Lights Blinking
Lights On
Lights Off
Lights Blinking
Power on – when +5V DC detected.
Power off.
The port is operating at 100Mbps.
The port is operating at 10Mbps.
Connection at Full-Duplex mode.
Connection at Half-Duplex mode.
The port is experiencing collisions.
The link through that port is successfully established.
The link through that port is not established.
Data transmitting or receiving on that port.
Connection at Full-Duplex mode.
Connection at Half-Duplex mode.
The port is experiencing collisions.
The link through that port is successfully established.
The link through that port is not established.
Data transmitting or receiving on that port.
Page 4 of 6
Printed on 12/4/2006
Product Specification of FST-80x
Confidential
■
DIP Switch
DIP Switch
DIP Switch 1
DIP Switch 2
DIP Switch 3
DIP Switch 4
DIP Switch 5
DIP Switch 6
Mode
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
Description
Fiber operates at Half Duplex mode.
Fiber operates at Full Duplex mode (default).
TX operates at Forced Mode.
TX operates at Auto-Negotiation (default).
TX operates at 10Mbps duplex mode.
TX operates at 100Mbps duplex mode (default).
TX operates at Half Duplex mode.
TX operates at Full Duplex mode (default).
LLR Enable.
LLR Disable (default).
LLCF Enable.
LLCF Disable (default).
3.4 ENVIRONMENTAL SPECIFICATION
Operating
Temperature:
Relative Humidity:
0~50°C
5~90 %( non-condensing)
Storage
Temperature:
-10~70°C
Relative Humidity:
5~90 %( non-condensing)
3.5 ELECTRICAL SPECIFICATION
Power Requirement: 5V DC 2A
Power Consumption: 6.2 Watts / 21 BTU (maximum)
3.6 REGULATORY COMPLIANCE
FCC Part 15 Class B, CE
3.7 RELIABILITY
MTBF > 50,000Hrs @ 25 Degree C
Filename: PS-FST80x_v1.0.doc
Page 5 of 6
Printed on 12/4/2006
Product Specification of FST-80x
Confidential
3.8 BASIC PACKAGING
o
Smart Fast Ethernet Converter x1
o
User’s Manual CD x1
o
AC-DC Power Adapter (Output: 5VDC, 2A max.) x1
3.9 PACKING INFORMATION
Dimension
140mm x 285mm x 70mm (W x D x H)
Weight
0.53kg (Gross weight)
20pcs in one canton
Filename: PS-FST80x_v1.0.doc
Page 6 of 6
Printed on 12/4/2006
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement