VADT/VADR14100WDM Series Data Sheet

VADT/VADR14100WDM Series Data Sheet
al Harmonic Distortion:
ut/Output:
avelength
0.01% @ 0 dB Output Level DTE/DCE Interface:
Balanced or Unbalanced, 600 ohms
User-Selectable
1310/1550 nm, Multimode or Single Mode
IFS Line / Fiber1Transmission
®
mber Of Fibers
nnectors
tical:
wer:
eo and Reverse Sync:
dio and Data:
ST, SC or FC (see ordering information)
Terminal Block with Screw Clamps
BNC (Gold Plated Center-Pin)
DB 25 Connector
VADT/VADR14100WDM
Series
ctrical & Mechanical
wer:
rface Mount:
12 VDC @ 500 mA
ck:
From Rack
IFS Video with Bi-Directional
Stereo
mber of Rack Slots:
2
rrent Protection:
Automatic Resettable
Solid-State Current Limiters
Audio, 2 Data Channels
& Reverse
cuit Board:
Meets IPC Standard
Sync
e (in./cm.)
(LxWxH)
rface Mount:
7.0 x 4.0 x 2.0 in., 17.8 x 10.2 x 5.1 cm
ck Mount:
7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5.1 cm
pping Weight:
< 2 lbs./0.9 kg
vironmental
BF:
> 100,000 hours
OVERVIEW
erating Temp:
-40° C to +74° C
orage Temp:
-40° CSeries
to +85°
C transceivers
The IFS VADT/VADR14100WDM
video
ative Humidity:
0%
to
95%
(non-condensing)†
support simultaneous broadcast quality transmission of 10-bit
STANDARD FEATURES
digitally encoded video, 20-bit digitally encoded stereo audio, bi-
ay be extended to condensation conditions by adding suffix ‘–C’ to
directional
data transmission,
odel number
for conformal
coating.and Genlock over one single mode
or multimode optical fiber. The modules are universally compatible
with major CCTV camera manufacturers and support
RS-232,
Fibers
Required
RS-422, and 2-wire or 4-wire RS-485 data interfaces and all major
1 of installation
protocols.
Plug-and-play
io & Data data
Transceiver
(1310/1550
nm)design ensures ease
Receiver &requiring
Data Transceiver
nm)
no electrical(1550/1310
or optical adjustments.
Each transceiver
incorporates status indicating LED’s for monitoring of proper system
1
The(1310/1550
modules arenm)
available in either stand-alone or rack
io & Data operation.
Transceiver
versions.
Receiver &mount
Data Transceiver
(1550/1310 nm)
io & Data Transceiver (1310/1550 nm)
Receiver &APPLICATION
Data Transceiver (1550/1310
nm)
EXAMPLES
1
• Distance Learning CCTV with PTZ Control and 2-Way Audio
Communications
rge (Requires R3 Rack purchased separately)
• ITS (Intelligent Transportation Systems)
C Input (Included if specified at time of order)
xtra charge, consult factory)
additional loss introduced by connectors, splices and patch panels.
SYSTEM DESIGN
ct 4 dB from Optical Power Budget. ♦ All accessories are third party manufactured.
• 10-Bit Digitally Encoded Video Transmission
• Exceeds RS-250C Short-Haul Transmission
• NTSC, PAL, SECAM Compatible
• Full Color Compatibility
• NTCIP Compatible
Digitally Encoded
Audio
Opt.• 20-Bit
Pwr. Budget
Max. Stereo
Distance*
• 600 Ohm Impedance Line-Level Audio
10 dB
@ In-field
1550 nm
2 miles
(3 km)
• No
Electrical
or Optical
Adjustments Required
10 dB
@
1310
nm
• Reverse Sync for Genlock
• LED Status Indicators For Monitoring All Critical Operating
Parameters
17 dB
31 miles (51 km)
• Hot-Swappable Rack Modules
• Automatic Resettable Fuses on all Power Lines
• Tested and Certified by an Independent Testing Laboratory for
23 dB
43 miles (69km)
Full Compliance with the Environmental Requirements (Ambient
Operating Temperature, Mechanical Shock, Vibration, Humidity
with Condensation, High-Line/Low-Line Voltage Conditions and
Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment
• Distances up to 43 Miles (69 km)
• Comprehensive Lifetime Warranty
System Design
To External
Genlock
VADT14130WDMHP
up to 43 miles
(69 km)
SYNC
VADR14130WDMHP
Video
(Coax)
Video
(Coax)
ifs
International
ifs
Fiber
Systems
Incorporated
203.426.1180
International
Fiber
Systems
Incorporated
203.426.1180
1 Fiber
9/125μm MM
P/T/Z Data
Audio
Pre-Amp
Control
Data
Control
Data
Audio
Pre-Amp
Keyboard
Amp/Speaker
Amp/Speaker
interlogix.com
VADT/VADR14100WDM Series
North America
T 855-286-8889
Latin America
T 561-998-6114
IFS Video with Bi-Directional Stereo Audio, 2 Data Channels & Reverse Sync
Ordering Information
Part Number
Multimode 62.5/125µm**
Description
Fibers Required Optical Pwr. Budget Max. Distance*
VADT14120WDM Video Transmitter/Audio & Data Transceiver (1310/1550 nm)
1
10 dB @ 1550 nm
2 miles (3 km)
VADR14120WDM Video Receiver/Audio & Data Transceiver (1550/1310 nm)
1
10 dB @ 1310 nm
2 miles (3 km)
Single Mode 9/125µm
VADT14130WDM Video Transmitter/Audio & Data Transceiver (1310/1550 nm)
1
17 dB
31 miles (51 km)
VADR14130WDM Video Receiver/Audio & Data Transceiver (1550/1310 nm)
1
17 dB
31 miles (51 km)
Accessories ♦
PS12VDC1.5A-U 12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)
Options
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦ All accessories are third party manufactured.
GE
Security
Specifications
Electrical & Mechanical
Video
Video Input/Output:
1 volt pk-pk (75 ohms)
Power:
Bandwidth:
5 Hz - 10 MHz
Surface Mount:
Differential Gain:
<2%
Rack:
Differential Phase:
<0.7°
Number of Rack Slots:
Tilt:
<1%
Current Protection:
Signal-to-Noise Ratio (SNR):
>67 dB
Circuit Board:
Size (in./cm.) (LxWxH)
Data
North America
T 888-GE-SECURITY
12 VDC @ 500 mA
888-437-3287
F 503-691-7566
From Rack
E [email protected]
2
AsiaSolid-State Current Limiters
Automatic Resettable
T 852-2907-8108
Meets IPC Standard
F 852-2142-5063
Australia and New Zealand
7.0 x 4.0 x 2.0 in., T17.8
x 10.2 x 5.1 cm
613-9239-1200
Data Interface:
RS-232, RS-422, 2 or 4-Wire RS-485 with Tri-State
Surface Mount:
Data Format:
NRZ, NRZI, Manchester, Bi-phase
Rack Mount:
613-9239-1299
7.7 x 5.0 x 2.0 in., F19.6
x 12.7 x 5.1 cm
Data Rate:
DC - 100 kbps (NRZ)
Shipping Weight:
< 2 lbs./0.9 kg
Operation Mode:
Simplex or Full-Duplex
Environmental
Europe
T 44-113-238-1668
F 44-113-253-8121
MTBF:
> 100,000 hours
No. of Bits:
20
Operating Temp:
Bandwidth:
20 Hz to 18 KHz @ -1 dB
Storage Temp:
-40° C to +74° C Latin America
T 305-593-4301
-40° C to +85° C F 305-593-4300
Maximum Input/Output Level:
0 dBm across 600 ohms
Relative Humidity:
Total Harmonic Distortion:
0.01% @ 0 dB Output Level
Input/Output
Balanced or Unbalanced, 600 ohms
Sampling Rate:
52.3 KHz
Signal-to-Noise Ration (SNR):
87 dB Minimum
Channel Crosstalk:
-100 dB @ 1 KHz
DTE/DCE Interface:
User-Selectable
Audio
0% to 95% (non-condensing)
gesecurity.com/ifs
Specifications subject to
change without notice
Agency Compliance
© 2008 General Electric Company
Complies
with
FDA Performance
All Rights
Reserved
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Wavelength
1310/1550 nm, Multimode or Single Mode
Number Of Fibers
1
Connectors
Optical:
ST
Power:
Terminal Block with Screw Clamps
Video and Reverse Sync:
BNC (Gold Plated Center-Pin)
Audio and Data:
DB 25 Connector
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Ordering Information
Part Number
D1010
interlogix.com
D1010WDMA✧
Multimode
D1010WDMB
62.5/125µm**
Specifications subject
to change without
notice.
D1020
© 2013 United Technologies Corporation
All rights
reserved.
D1030
Interlogix is part of UTC Building
& Industrial
Systems, ✧
Single Mode
D1030WDMA
a unit of United
Technologies Corporation.
9/125µm
D1030WDMB
De
RS
RS
RS
RS
RS
RS
RS
VADT/VADR14100WDM Series
Accessories♦
PS-12VDC 12 Volt DC Plu
PS-12VDC-230 12 Volt D
Options
Add ‘-R3’ to Model Num
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement