Teccor brand Thyristors Sxx40x Series 40 Amp Standard SCRs

Teccor brand Thyristors Sxx40x Series 40 Amp Standard SCRs
Teccor® brand Thyristors
40 Amp Standard SCRs
Sxx40x Series
RoHS
Description
Excellent unidirectional switches for phase control
applications such as heating and motor speed controls.
Standard phase control SCRs are triggered with few
milliamperes of current at less than 1.5V potential.
Features & Benefits
• RoHS compliant
• Glass – passivated
junctions
Main Features
• Surge capability up to
520 A
Applications
Symbol
Value
Unit
40
A
400 to 1000
V
40
mA
IT(RMS)
VDRM /VRRM
• Voltage capability up
to 1000 V
IGT
Typical applications are AC solid-state switches, industrial
power tools, exercise equipment, white goods and
commercial appliances.
Schematic Symbol
Additional Information
A
Datasheet
Resources
K
Samples
G
Absolute Maximum Ratings
Parameter
Test Conditions
Value
Unit
IT(RMS)
Symbol
RMS on-state current
TC = 100°C
40
A
IT(AV)
Average on-state current
A
ITSM
I 2t
di/dt
IGM
PG(AV)
Tstg
TJ
TC = 100°C
25.0
single half cycle; f = 50Hz;
TJ (initial) = 25°C
430
single half cycle; f = 60Hz;
TJ (initial) = 25°C
520
I2t Value for fusing
tp = 8.3 ms
1122
A2s
Critical rate of rise of on-state current
f = 60Hz ; TJ = 125°C
175
A/μs
Peak gate current
TJ = 125°C
3.5
A
Average gate power dissipation
TJ = 125°C
Peak non-repetitive surge current
A
0.8
W
Storage temperature range
-40 to 150
°C
Operating junction temperature range
-40 to 125
°C
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
Teccor® brand Thyristors
40 Amp Standard SCRs
Electrical Characteristics (TJ = 25°C, unless otherwise specified)
Symbol
IGT
Test Conditions
Value
VD = 12V; RL = 30 Ω
VGT
VD = VDRM; gate open; TJ = 100°C
MAX.
40
MIN.
5
MAX.
1.5
400V
650
600V
600
800V
1000V
dv/dt
VD = VDRM; gate open; TJ = 125°C
Unit
mA
V
500
MIN.
250
400V
550
600V
500
800V
V/μs
475
VGD
VD = VDRM; RL = 3.3 kΩ; TJ = 125°C
MIN.
0.2
V
IH
IT = 400mA (initial)
MAX.
60
mA
tq
(1)
MAX.
35
μs
tgt
IG = 2 x IGT; PW = 15µs; IT = 80A
TYP.
2.5
μs
Note :
(1) IT=2A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs
Static Characteristics
Symbol
Test Conditions
VTM
IT = 80A; tp = 380μs
TJ = 25°C
IDRM / IRRM
VDRM / VRRM
TJ = 125°C
Unit
1.8
V
MAX.
400 – 600V
10
800 V
20
1000 V
30
400 – 600V
TJ = 100°C
Value
800V
1000
MAX.
1500
1000V
5000
400 – 600V
2000
800V
3000
μA
Thermal Resistances
Symbol
Parameter
Rθ(J-C)
Junction to case (AC)
Sxx40R /
Sxx40N
Rθ(J-A)
Junction to ambient
Sxx40R
Value
Unit
0.6
°C/W
40
°C/W
Note: xx = voltage
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
Teccor® brand Thyristors
40 Amp Standard SCRs
Figure 1: Normalized DC Gate Trigger Current
vs. Junction Temperature
Figure 2: Normalized DC Gate Trigger Voltage
vs. Junction Temperature
2.0
Ratio of VGT / VGT (TJ = 25°C)
Ratio of IGT / IGT (TJ = 25°C)
2.0
1.5
1.0
0.5
1.5
1.0
0.5
0.0
0.0
-40
-15
10
35
60
85
110
-40
125
-15
10
35
60
85
110
125
Junction Temperature (TJ ) --(°C)
Junction Temperature (TJ)-- (°C)
Figure 3: Normalized DC Holding Current
vs. Junction Temperature
Figure 4: O
n-State Current vs. On-State
Voltage (Typical)
120
2.0
TJ = 25°C
1.5
Instantaneous On-state
Current (iT) – Amps
Ratio of IH / IH (TJ = 25°C)
100
1.0
0.5
80
60
40
20
0.0
-40
-15
10
35
60
85
110
0
125
0.7
0.8
Junction Temperature (T J) -- (°C)
Figure 5: Power Dissipation (Typical)
vs. RMS On-State Current
1.0
1.1
1.2
1.3
1.4
1.5
1.6
Figure 6: M
aximum Allowable Case Temperature
vs. RMS On-State Current
40
130
125
35
120
Maximum Allowable
Case Temperature (TC )- °C
Average On-State Power Dissipation
[PD(AV)] - (Watts)
0.9
Instantaneous On-state Voltage (vT) – Volts
30
25
20
15
10
115
110
105
100
95
90
85
80
5
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
75
0
0
5
10
15
20
25
30
RMS On-State Current [IT(RMS)] - (Amps)
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
35
40
70
0
5
10
15
20
25
30
35
RMS On-State Current [IT(RMS)] - Amps
40
45
50
Teccor® brand Thyristors
40 Amp Standard SCRs
Figure 7: Maximum Allowable Case Temperature
vs. Average On-State Current
Figure 8: Maximum Allowable Ambient Temperature
vs. RMS On-State Current
130
120
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
Maximum Allowable Ambient
Temperature (TA) - °C
Maximum Allowable
Case Temperature (TC) - °C
125
120
115
110
105
100
95
90
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
85
100
80
60
40
20
0
80
0
5
10
15
20
25
0.0
0.5
1.0
1.5
2.0
2.5
RMS On-State Current [IT(RMS)] - Amps
Average On-State Current [IT(AVE)] - Amps
Figure 9: Maximum Allowable Ambient Temperature vs. Average On-State Current
Maximum Allowable
Ambient Temperature (Tc) - °C
120
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
100
80
60
40
20
0
0.0
0.5
1.0
1.5
Average On-State Current [IT(AVE)] - Amps
Figure 10: Peak Capacitor Discharge Current
Figure 11: Peak Capacitor Discharge Current Derating
1.2
1.0
Normalized Peak Current
Peak Discharge Current (ITM) - Amps
10000
1000
ITRM
0.8
0.6
0.4
0.2
tW
100
0.0
0.5
1.0
10.0
Pulse Current Duration (tw) - ms
50.0
0
25
50
75
100
125
150
Case Temperature (TC) - °C
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
Teccor® brand Thyristors
40 Amp Standard SCRs
Figure 12: Surge Peak On-State Current vs. Number of Cycles
Peak Surge (Non-repetitive)
On-state Current (ITSM) – Amps
1000
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
Notes:
1. G
ate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
100
10
1
10
100
1000
Surge Current Duration -- Full Cycles
Soldering Parameters
Pre Heat
Pb – Free assembly
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
60 – 180 secs
Average ramp up rate (Liquidus Temp)
(TL) to peak
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
Peak Temperature (TP)
260
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
+0/-5
°C
tP
TP
Temperature
Reflow Condition
Ramp-up
TL
tL
TS(max)
Preheat
TS(min)
25
Ramp-do
Ramp-down
tS
time to peak temperature
Time
Teccor® brand Thyristors
40 Amp Standard SCRs
Physical Specifications
Environmental Specifications
Test
Terminal Finish
100% Matte Tin-plated
Body Material
UL recognized epoxy meeting flammability
classification 94V-0
Lead Material
Copper Alloy
Specifications and Conditions
AC Blocking
Temperature Cycling
Temperature/
Humidity
Design Considerations
High Temp Storage
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of the Thyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
Low-Temp Storage
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C;
15-min dwell-time
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C;
85% rel humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
1008 hours; -40°C
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwelltime
at each temperature; 10 sec (max) transfer
time between temperature
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
100% R/H
Thermal Shock
Autoclave
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
ANSI/J-STD-002, category 3, Test A
Lead Bend
MIL-STD-750, M-2036 Cond E
Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead
TC MEASURING POINT
AREA (REF.) 0.17 IN2
O
A
E
Dimension
8.13
.320
P
ANODE
B
C
13.36
.526
D
7.01
.276
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
R
G
L
H
CATHODE
ANODE GATE
K
J
N
M
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
Inches
Millimeters
Min
Max
Min
Max
A
0.380
0.420
9.65
10.67
B
0.105
0.115
2.67
2.92
C
0.230
0.250
5.84
6.35
D
0.590
0.620
14.99
15.75
E
0.142
0.147
3.61
3.73
F
0.110
0.130
2.79
3.30
G
0.540
0.575
13.72
14.61
H
0.025
0.035
0.64
0.89
J
0.195
0.205
4.95
5.21
K
0.095
0.105
2.41
2.67
L
0.060
0.075
1.52
1.91
M
0.085
0.095
2.16
2.41
N
0.018
0.024
0.46
0.61
O
0.178
0.188
4.52
4.78
P
0.045
0.060
1.14
1.52
R
0.038
0.048
0.97
1.22
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
Teccor® brand Thyristors
40 Amp Standard SCRs
Dimensions – TO- 263 (N-package) — D2-Pak Surface Mount
TC MEASURING POINT
B
Dimension
E
ANODE
8.41
.331
7.01
.276
A
S
W
K
GATE
CATHODE
G
Max
A
0.360
0.370
9.14
9.40
B
0.380
0.420
9.65
10.67
C
0.178
0.188
4.52
4.78
0.025
0.035
0.63
0.89
E
0.048
0.055
1.22
1.40
F
0.060
0.075
1.52
1.91
7.01
.276
16.89
.665
8.89
.350
Min
D
2.16
.085
7.01
.276
Max
J
F
11.68
.460
Millimeters
Min
U
8.13
.320
H
D
Inches
AREA: 0.11 in 2
C
V
1.40
.055
3.81
.150
G
0.095
0.105
2.41
2.67
H
0.083
0.093
2.11
2.36
J
0.018
0.024
0.46
0.61
K
0.090
0.110
2.29
2.79
S
0.590
0.625
14.99
15.87
V
0.035
0.045
0.89
1.14
U
0.002
0.010
0.05
0.25
W
0.040
0.070
1.02
1.78
2.03
.080
6.60
.260
Part Numbering System
S 60 40 R
DEVICE TYPE
S: SCR
VOLTAGE RATING
40: 400V
60: 600V
80: 800V
K0: 1000V
CURRENT RATING
40: 40A
Part Marking System
56
TO-220 AB - (R Package)
TO-263 AB - (N Package)
Lead Form Dimensions
xx: Lead Form Option
SENSITIVITY & TYPE
[blank]: 40mA
S6040R
YM
®
PACKAGE TYPE
R: TO-220 (Non-isolated)
N: TO-263 (D 2 - Pak)
Date Code Marking
Y:Year Code
M: Month Code
XXX: Lot Trace Code
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
Teccor® brand Thyristors
55 Amp Standard SCRs
Product Selector
Part Number
Voltage
Gate Sensitivity
Type
Package
X
40mA
Standard SCR
TO-220R
X
40mA
Standard SCR
TO-263
400V
600V
800V
1000V
Sxx40R
X
X
X
Sxx40N
X
X
X
Note: xx = Voltage
Packing Options
Marking
Weight
Packing Mode
Base Quantity
Sxx40R
Part Number
Sxx40R
2.2g
Bulk
500
Sxx40RTP
Sxx40R
2.2g
Tube
500 (50 per tube)
Sxx40NTP
Sxx40N
1.6g
Tube
500 (50 per tube)
Sxx40NRP
Sxx40N
1.6g
Embossed Carrier
500
Note: xx = Voltage
Reel Pack (RP) for TO-263 Embossed Carrier Specifications
Meets all EIA-481-2 Standards
0.63
(16.0)
0.157
(4.0)
Gate
0.059
DIA
(1.5)
0.945
(24.0)
0.827
(21.0)
Cathode
*
* Cover tape
Anode
0.512 (13.0) Arbor
Hole Dia.
12.99
(330.0)
Dimensions
are in inches
(and millimeters).
1.01
(25.7)
Direction of Feed
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement