5715V101_UK
5715
Programmable
LED Indicator
No. 5715V101-UK
F r o m s e r. n o . 0 5 0 8 5 7 0 0 1
SIGNALS THE BEST
DK
PR electronics A/S tilbyder et bredt program af analoge og digitale
signalbehandlingsmoduler til industriel automation. Programmet
består af Isolatorer, Displays, Ex-barrierer, Temperaturtransmittere,
Universaltransmittere mfl. Vi har modulerne, du kan stole på i selv
barske miljøer med elektrisk støj, vibrationer og temperaturudsving, og alle produkter opfylder de strengeste internationale standarder. Vores motto »Signals the Best« er indbegrebet af denne
filosofi – og din garanti for kvalitet.
UK
PR electronics A/S offers a wide range of analogue and digital
signal conditioning modules for industrial automation. The product
range includes Isolators, Displays, Ex Interfaces, Temperature
Transmitters, and Universal Modules. You can trust our products
in the most extreme environments with electrical noise, vibrations
and temperature fluctuations, and all products comply with the
most exacting international standards. »Signals the Best« is the
epitome of our philosophy – and your guarantee for quality.
FR
PR electronics A/S offre une large gamme de produits pour le
traite­ment des signaux analogiques et numériques dans tous
les domaines industriels. La gamme de produits s’étend des
transmetteurs de température aux afficheurs, des isolateurs aux
interfaces SI, jusqu’aux modules universels. Vous pouvez compter
sur nos produits même dans les conditions d’utilisation sévères,
p.ex. bruit électrique, vibrations et fluctuations de température.
Tous nos produits sont conformes aux normes internationales les
plus strictes. Notre devise »SIGNALS the BEST« c’est notre ligne
de conduite - et pour vous l’assurance de la meilleure qualité.
DE
PR electronics A/S verfügt über ein breites Produktprogramm
an analogen und digitalen Signalverarbeitungsmodule für die in­
dustrielle Automatisierung. Dieses Programm umfasst Displays,
Temperaturtransmitter, Ex- und galvanische Signaltrenner, und
Universalgeräte. Sie können unsere Geräte auch unter extremen
Einsatzbedingungen wie elektrisches Rauschen, Erschütterungen
und Temperaturschwingungen vertrauen, und alle Produkte von
PR electronics werden in Überein­stimmung mit den strengsten
internationalen Normen produziert. »Signals the Best« ist Ihre
Garantie für Qualität!
1022
Programmable LED indicator
5715
contents
Warning...............................................................................
Symbol identification...........................................................
Safety instructions...............................................................
Declaration of conformity....................................................
Front and back layout.........................................................
Application..........................................................................
Technical characteristics.....................................................
Mounting / installation.........................................................
Applications.........................................................................
Order: 5715.........................................................................
Electrical specifications.......................................................
Sensor error detection inside and outside range...............
Connections........................................................................
Block diagram.....................................................................
Routing diagram..................................................................
Scrolling help texts..............................................................
Configuration / operating the function keys.......................
Programming via PC...........................................................
Graphic depiction of the relay function setpoint................
5715V101
2
2
3
5
6
7
7
7
8
9
9
13
14
15
17
18
20
21
21
1
Warning
GENERAL
This module is designed for connection to hazardous electric
voltages. Ignoring this warning can result in severe personal
injury or mechanical damage. To avoid the risk of electric shock
and fire, the safety instructions of this manual must be observed
and the guidelines followed. The specifications must not be
exceeded, and the module must only be applied as described
in the following. Prior to the commissioning of the module, this
manual must be examined carefully. Only qualified personnel
(technicians) should install this module.
If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be
impaired.
WARNING
HAZARD­
OUS
VOLTAGE
Until the module is fixed, do not connect hazardous voltages to
the module.
The following operations should only be carried out on a
disconnected module and under ESD safe conditions:
Troubleshooting the module.
Repair of the module must be done by PR electronics A/S
only.
Symbol identification
Triangle with an exclamation mark: Warning / demand. Potentially
lethal situations.
The CE mark proves the compliance of the module with the essential
requirements of the directives.
2
5715V101
CONTENTS
Safety instructions
Definitions
Hazardous voltages have been defined as the ranges: 75 to 1500 Volt DC, and
50 to 1000 Volt AC.
Technicians are qualified persons educated or trained to mount, operate, and
also troubleshoot technically correct and in accordance with safety regulations.
Operators, being familiar with the contents of this manual, adjust and operate
the knobs or potentiometers during normal operation.
Receipt and unpacking
Unpack the device without damaging it. The packing should always follow the
device until this has been permanently mounted. Check at the receipt of the
device whether the type corresponds to the one ordered.
Environment
Avoid direct sunlight, dust, high temperatures, mechanical vibrations and shock,
as well as rain and heavy moisture. If necessary, heating in excess of the stated
limits for ambient temperatures should be avoided by way of ventilation.
All modules fall under Installation Category II, Pollution Degree 1, and Insulation
Class II.
Mounting
Only technicians who are familiar with the technical terms, warnings, and
instructions in the manual and who are able to follow these should connect the
module.
Should there be any doubt as to the correct handling of the module, please
contact your local distributor or, alternatively,
PR electronics A/S
www.prelectronics.com
Mounting and connection of the module should comply with national legislation
for mounting of electric materials, i.e. wire cross section, protective fuse, and
location. Descriptions of Input / Output and supply connections are shown in
the block diagram and side label.
CONTENTS
5715V101
3
The following apply to fixed hazardous voltages-connected modules:
The max. size of the protective fuse is 10 A and, together with a power
switch, it should be easily accessible and close to the module. The
power switch should be marked with a label telling it will switch off the
voltage to the module.
UL installation requirements
For use on a flat surface of a type 1 enclosure
Use 60/75°C copper conducters only
Enclosure rating (face only)..................... Type 4X, UL50E
Max. ambient temperature...................... 60°C
Max. wire size, pins 41...46..................... AWG 30-16
Max. wire size, others............................. AWG 30-12
UL file number......................................... E248256
Calibration and Adjustment
During calibration and adjustment, the measuring and connection of external
voltages must be carried out according to the specifications of this manual. The
technician must use tools and instruments that are safe to use.
Normal operation
Operators are only allowed to adjust and operate modules that are safely fixed
in panels, etc., thus avoiding the danger of personal injury and damage. This
means there is no electrical shock hazard, and the module is easily accessible.
Cleaning
When disconnected, the module may be cleaned with a cloth moistened with
distilled water.
Liability
To the extent the instructions in this manual are not strictly observed, the
custom­er cannot advance a demand against PR electronics A/S that would
otherwise exist according to the concluded sales agreement.
4
5715V101
CONTENTS
Declaration of conformity
As manufacturer
PR electronics A/S
Lerbakken 10
DK-8410 Rønde
hereby declares that the following product:
Type: 5715
Name: Programmable LED indicator
is in conformity with the following directives and standards:
The EMC Directive 2004/108/EC and later amendments
EN 61326-1
For specification of the acceptable EMC performance level, refer to the
electrical specifications for the module.
The Low Voltage Directive 2006/95/EC and later amendments
EN 61010-1
Rønde, 17 December 2009
CONTENTS
Kim Rasmussen
Manufacturer’s signature
5715V101
5
Front and back layout
Picure 1: Front of PReview 5715.
Picture 2: Back of PReview 5715.
6
5715V101
CONTENTS
Programmable LED indicator
PReview 5715
• 4-digit 14-segment LED display
• Input for mA, V, potentiometer, RTD and TC
• 4 relays and analogue output
• Universal supply
• Programmable via front keys and PC
Application
• Display for digital readout of current / voltage / temperature or 3-wire
potentiometer signals.
• Process control with 4 pairs of potential-free change-over relays and
analogue output.
• For tank level control, with the possibility of customer linearisation ensuring
correct level measurement and control in non-linear tanks.
Technical characteristics
• 4-digit LED indicator with 13.8 mm 14-segment characters. Max. display
read­out -1999...9999 with programmable decimal point and relay ON / OFF
indication.
• All standard operational parameters can be adjusted to any application by
way of the front function keys. When programming is carried out by way of
a PC and the configuration program PReset, additional configuration options
are available, such as customer-defined linearisation and special input signals.
• Help texts in eight languages can be selected via a menu item.
• A menu item allows the user to minimise the installation test time for the relay
outputs by activating / deactivating each relay independently of the input signal.
Mounting / installation
• To be mounted in panel front. The included rubber packing must be mounted
between the panel cutout hole and the display front to obtain a protection
degree of IP65 (type 4X). For extra protection in extreme environments,
PReview 5715 can be delivered with a specially designed splash-proof cover
as accessory.
CONTENTS
5715V101
7
Applications
Input signals:
Current
46
+
-
RTD -
45
2-twire transmitter
Potentio­ Connection, wires
meter
4 3 2
+
44
TC
Voltage
-
+
+
-
-
43
1
2
3
4
42
41
Output signals:
1
2
3
4
12
+
26
66
25
65
24
64
23
63
22
62
-
21
11
Analogue, 0/4...20 mA
61
4 change-over relays
Supply:
32
21.6...253 VAC
or
19.2...300 VDC
1
2
3
4
31
8
5715V101
CONTENTS
Order: 5715
Type
Version
5715
4 relays . . . . . . . . . . . . . . . . . . . : B
Analogue output and 4 relays . . : D
Electrical specifications
Specifications range:
-20°C to +60°C
Common specifications:
Supply voltage, universal............................. 21.6...253 VAC, 50...60 Hz or
19.2...300 VDC
Consumption:
Type
Internal consumption
Max. consumption
5715B
3.0 W
3.3 W
5715D
3.5 W
3.8 W
Isolation voltage, test / operation................ 2.3 kVAC / 250 VAC
Signal / noise ratio....................................... Min. 60 dB (0...100 kHz)
Communications interface........................... USB Loop Link
Response time (0...90%, 100...10%):
Temperature input..................................... < 1 s
Current / voltage input.............................. < 400 ms
Calibration temperature............................... 20...28°C
Accuracy, the greater of general and basic values:
General values
Input type
Absolute
accucary
Temperature
coefficient
All
≤ ±0.1% of reading
≤ ±0.01% of reading / °C
CONTENTS
5715V101
9
Basic values
Input type
Basic
accuracy
Temperature
coefficient
≤ ±0.4 µA / °C
mA
≤ ±4 µA
Volt
≤ ±20 µV
≤ ±2 µV / °C
Potentiometer
≤ ±0.1 Ω
≤ ±0.01 Ω / °C
Pt100
≤ ±0.2°C
≤ ±0.02°C / °C
Ni100
≤ ±0.3°C
≤ ±0.03°C / °C
TC type:
E, J, K, L, N, T, U
≤ ±1°C
≤ ±0.05°C / °C
TC type: R, S,
W3, W5, LR
TC type: B
160...400°C
≤ ±2°C
≤ ±0.2°C / °C
≤ ±4.5°C
≤ ±0.45°C / °C
TC type: B
400...1820°C
≤ ±2°C
≤ ±0.2°C / °C
EMC immunity influence...................................... < ±0,5% of reading
Auxiliary supply:
2-wire supply (pin 46...45)........................
Wire size, pin 41...46 (max.).........................
Wire size, others (max.)................................
Relative humidity..........................................
Dimensions (HxBxD)....................................
Cutout dimensions.......................................
Protection degree (mounted in panel)..........
Weight..........................................................
RTD and potentiometer input:
25...15 VDC / 0...20 mA
1 x 1.5 mm2 stranded wire
1 x 2.5 mm2 stranded wire
< 95% RH (non cond.)
48 x 96 x 120 mm
44.5 x 91.5 mm
IP65 / Type 4X, UL50E
260 g
Input
type
Min.
value
Max.
value
Standard
Pt100
Ni100
Potentiometer
-200°C
-60°C
10 Ω
+850°C
+250°C
100 kΩ
IEC60751
DIN 43760
-
Input for RTD types:
Pt10, Pt20, Pt50, Pt100, Pt200, Pt250, Pt300, Pt400, Pt500, Pt1000
Ni50, Ni100, Ni120, Ni1000
Cable resistance per wire, RTD (max.)......... 50 Ω
10
5715V101
CONTENTS
Sensor current, RTD.....................................
Effect of sensor cable resistance
(3- / 4-wire), RTD..........................................
Sensor error detection, RTD........................
Short circuit detection, RTD.........................
TC input:
Nom. 0.2 mA
< 0.002 Ω / Ω
Yes
< 15 Ω
Type
Min.
value
Max.
value
Standard
B
E
J
K
L
N
R
S
T
U
W3
W5
LR
+0°C
-100°C
-100°C
-180°C
-200°C
-180°C
-50°C
-50°C
-200°C
-200°C
0°C
0°C
-200°C
+1820°C
+1000°C
+1200°C
+1372°C
+900°C
+1300°C
+1760°C
+1760°C
+400°C
+600°C
+2300°C
+2300°C
+800°C
IEC 60584-1
IEC 60584-1
IEC 60584-1
IEC 60584-1
DIN 43710
IEC 60584-1
IEC 60584-1
IEC 60584-1
IEC 60584-1
DIN 43710
ASTM E988-90
ASTM E988-90
GOST 3044-84
Cold junction compensation (CJC)
via internal sensor.................................... ±(2.0°C + 0.4°C * Δt)
Δt = internal temperature - ambient temperature
Sensor error detection, all TC types............ Yes
Sensor error current:
when detecting........................................ Nom. 2 μA
else........................................................... 0 μA
Current input:
Measurement range..................................... 0...20 mA
Programmable measurement ranges........... 0...20 and 4...20 mA
Input resistance............................................ Nom. 20 Ω + PTC 25 Ω
Sensor error detection:
loop break 4...20 mA................................ Yes
Voltage input:
Measurement range..................................... 0...12 VDC
Programmable measurement ranges........... 0...1, 0.2...1,
0...10 and 2...10 VDC
Input resistance............................................ Nom. 10 MΩ
CONTENTS
5715V101
11
Outputs:
Display:
Display readout............................................
Decimal point...............................................
Digit height...................................................
Display updating..........................................
Input outside input range is
indicated by..................................................
Current output:
Signal range (span).......................................
Programmable signal ranges.......................
Load (max.)...................................................
Load stability................................................
Sensor error detection.................................
NAMUR NE 43 Up- / Downscale.................
Output limitation:
on 4...20 and 20...4 mA signals................
on 0...20 and 20...0 mA signals................
Current limit..................................................
Relay outputs:
Relay function..............................................
Hysteresis, in % / display counts................
On and Off delay..........................................
Sensor error detection.................................
Max. voltage.................................................
Max. current.................................................
Max. AC power............................................
Max. current at 24 VDC...............................
Marine approval:
Det Norske Veritas, Ships & Offshore..........
GOST R approval:
VNIIM, Cert. no.............................................
Observed authority requirements:
EMC 2004/108/EC.......................................
LVD 2006/95/EC...........................................
UL, Standard for Safety...............................
12
-1999...9999 (4 digits)
Programmable
13.8 mm
2.2 times / s
Explanatory text
0...20 mA
0...20, 4...20,
20...0 and 20...4 mA
20 mA / 800 Ω / 16 VDC
≤ 0.01% of span / 100 Ω
23 / 0 / 3.5 mA / none
23 mA / 3.5 mA
3,8...20.5 mA
0...20.5 mA
≤ 28 mA
Setpoint
0.1...25% / 1...2999
0...3600 s
Make / Break / Hold
250 VRMS
2 A / AC
500 VA
1A
Standard for Certification No. 2.4
See www.prelectronics.com
Standard:
EN 61326-1
EN 61010-1
UL 508
5715V101
CONTENTS
Sensor error detection inside and outside range
Sensor error check in 5715 variants:
Variant:
5715B
5715D
Input
VOLT
CURR
POTM
TEMP
Configuration
ERR1, ERR2, ERR3 and ERR4 = NONE
Else:
Sensor error detection:
OFF
ON
OFF
ON
ERR1, ERR2, ERR3 and ERR4=NONE, O.ERR=NONE.
Else:
Outside range readout (IN.LO, IN.HI):
If the valid range of the A/D converter or the polynomial is exceeded
Range
Readout
Limit
IN.LO
< -25 mV
0...1 V / 0.2...1 V
IN.HI
> 1.2 V
IN.LO
< -25 mV
0...10 V / 2...10 V
IN.HI
> 12 V
IN.LO
< -1.05 mA
0...20 mA / 4...20 mA
IN.HI
> 25.05 mA
IN.LO
< -0.5%
IN.HI
> 100.5%
IN.LO
< temperature range -2°C
TC / RTD
IN.HI
> temperature range +2°C
Sensor error detection (SE.BR, SE.SH):
Input
CURR
Range
Loop break (4...20mA)
TC
RTD, 2-wire
No SE.SH for Pt10, Pt20 and Pt50
TEMP
RTD, 3-wire
No SE.SH for Pt10, Pt20 and Pt50
RTD, 4-wire
No SE.SH for Pt10, Pt20 and Pt50
Readout
SE.BR
SE.BR
SE.BR
SE.SH
SE.BR
SE.SH
SE.BR
SE.SH
Limit
<= 3.6 mA; > = 21 mA
> ca. 750 kohm / (1.25 V)
> ca. 15 kohm
< ca. 15 ohm
> ca. 15 kohm
< ca. 15 ohm
> ca. 15 kohm
< ca. 15 ohm
Display readout below min. / above max. (-1.9.9.9, 9.9.9.9):
Input
Range
CURR
All
VOLT
All
POTM
-
Readout
-1.9.9.9
9.9.9.9
-1.9.9.9
9.9.9.9
-1.9.9.9
9.9.9.9
Limit
Display readout <-1999
Display readout >9999
Display readout <-1999
Display readout >9999
Display readout <-1999
Display readout >9999
Readout at hardware error
Error search
Test of internal communication uC / ADC
Test of internal CJC sensor
Check-sum test of the configuration in RAM
Check-sum test of the configuration in EEprom
Readout
HW.ER
CJ.ER
RA.ER
EE.ER
Error cause
Permanent error in ADC
CJC sensor defect
Error in RAM
Error in EEPROM
! Error indications in the display blink once a second. The help text explains the error.
CONTENTS
5715V101
13
Connections
Supply:
31 32
Inputs:
RTD, 2-wire
41 42 43 44 45 46
RTD, 3-wire
TC
41 42 43 44 45 46
+
-
Voltage
41 42 43 44 45 46
-
41 42 43 44 45 46
2-wire transmitter
41 42 43 44 45 46
-
RTD, 4-wire
41 42 43 44 45 46
Tx
+
Current
41 42 43 44 45 46
-
+
Potentiometer
41 42 43 44 45 46
+
Output:
Relays
Current
11 12
-
14
mA
+
21 22 23 24 25 26
R1
R2
5715V101
Relays
41 62
61
42 63
43 64
44 65
45 66
46
R3
R4
CONTENTS
CONTENTS
5715V101
1
3
2
Potm.
4
3
RTD,
wires
2
+
+V
Tx
+
TC
Input gnd.
+
Input +,
mA
2-wire supply
> 15 VDC
41
42
Int.
CJC
43
44
45
46
20 W
PTC
0.2 mA
AD
5715
EEPROM
CPU
Version D
PC communication
1
2
3
4
R4
R3
R2
R1
66
64
65
63
61
62
26
24
25
23
21
22
11
12
31
32
mA
Relay 4 N.C.
Common
Relay 4 N.O.
Relay 3 N.C.
Common
Relay 3 N.O.
Relay 2 N.C.
Common
Relay 2 N.O.
Relay 1 N.C.
Gnd.
I
Output
Common
Relay 1 N.O.
I+
Supply
21.6...253 VAC
or
19.2...300 VDC
Supply
Block diagram
15
Power up
1.2
1 2
1 2
REL1
REL2
REL3
REL4
50.0
1.0
3
F.SET
1.3
SETP
3
1 2
-1999
9999
/OFF
Fast setpoint adjustment and relay test
3
1
Increase setpoint
2
Decrease setpoint
3
Save and exit the menu
1
and 2 simultaneously =
relay changes state
1.1
PASS
1 2
0000
9999
3 Hold
IN
DEC.P
DI.LO
DI.HI
1 2
1 2
1111
1.1 .1 .1
1 2
a999
9999
1 2
a999
9999
1.4
3 C.LIN 3
3
3
1 2
PERC
DISP
3
CURR 3 RANG
1 2
4-20
0-20
To 1.0
3
VOLT 3 RANG 3
LANG
1 2
DE_DK
ES_FR
IT_SE
UK_CZ
3
REL.U
1 2
0-10
2-10
0.2-1
0.0-1
3
POTM 3 CA.LO
1 2
YES
NO
CA.HI
3
1 2
YES
NO
3
PT.TY
3
TEMP 3 TYPE
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
=
=
=
=
Default state
Only if password-protected
Only is FastSet is enabled
Setpoint adjustment and
relay test disabled at password 5000...9999.
= Only for special configuration via PC
= Not valid for these input
signals: Potentiometer,
0...20 mA and voltage
= Only if input signal is temperature
= No analogue output
16
1 2
PT
1 2
10
1000
NI
TC
3
CONN
3
1 2
4W
3W
2W
3
NI.TY
CONN
DEC.P
UNIT
1 2
50
1000
1 2
4W
3W
2W
1 2
1111
111.1
1 2
'C
'F
3
3
3
3 TC.TY
1 2
TC.B TC.E TC.J TC.K TC.L
TC.N TC.R TC.S TC.T TC.U
TC.W3 TC.W5 TC.LR
5715V101
3
CONTENTS
3
Routing diagram
If no key is activated for 2 minutes, the display returns to default state
1.0 without saving configuration changes.
1 Increase value / choose next parameter
2 Decrease value / choose previous parameter
3 Accept the chosen parameter and go to the next menu
Hold 3 Back to previous menu / return to default state 1.0 without saving
3
3
3
3
REL.1
SETP
ACT1
HYS1
1 2
SET
SKIP
OFF
1 2
a999
9999
1 2
INCR
DECR
1 2
0.1
25.0
3
3
3
REL.2
SETP
ACT2
HYS2
1 2
SET
SKIP
OFF
1 2
a999
9999
1 2
INCR
DECR
1 2
0.1
25.0
3
3
3
REL.3
SETP
ACT3
HYS3
1 2
SET
SKIP
OFF
1 2
a999
9999
1 2
INCR
DECR
1 2
0.1
25.0
3
3
3
REL.4
SETP
ACT4
HYS4
1 2
SET
SKIP
OFF
1 2
a999
9999
1 2
INCR
DECR
1 2
0.1
25.0
3
3
3
1.5
3
1.5
3
1.5
3
1.5
3
ERR1
ON.DE
1 2
HOLD
ACTI
DEAC
NONE
1 2
0000
3600
ERR2
ON.DE
1 2
HOLD
ACTI
DEAC
NONE
1 2
0000
3600
1 2
4-20
0-20
20-4
20-0
3
ERR3
ON.DE
1 2
HOLD
ACTI
DEAC
NONE
1 2
0000
3600
3
ERR4
ON.DE
1 2
HOLD
ACTI
DEAC
NONE
1 2
0000
3600
1.7
A.OUT
3
3
OF.DE
1 2
0000
3600
3
3
OF.DE
1 2
0000
3600
3
3
OF.DE
1 2
0000
3600
3
3
OF.DE
1 2
0000
3600
3
3
1.7
1.6
O.LO
3
1 2
a999
9999
1.6
3
O.HI
1 2
a999
9999
1.5
3
O.ERR
RESP
E.PAS
1 2
3.5mA
0mA
23mA
NONE
1 2
0.4
60.0
1 2
YES
NO
3
3
5715V101
1 2
0000
9999
3
3
NO
To default state 1.0
CONTENTS
N.PAS
----
17
Scrolling help texts
Display in default state xxxx, hardware error:
SE.BR --> SENSOR WIRE BREAKAGE
SE.SH --> SENSOR SHORT CIRCUIT
IN.HI --> INPUT OVERRANGE
IN.LO --> INPUT UNDERRANGE
9.9.9.9 --> DISPLAY OVERRANGE
-1.9.9.9--> DISPLAY UNDERRANGE
HW.ER--> HARDWARE ERROR
EE.ER --> EEPROM ERROR CHECK CONFIGURATION
RA.ER --> RAM MEMORY ERROR
CJ.ER -->CJC SENSOR ERROR
CA.HI
YES -->
NO
-->
DEC.P
1111 -->
111.1 -->
11.11 -->
1.111 -->
DI.LO
xxxx -->
Fastset (Enabled):
F.SET
REL1 --> FAST SET MENU SELECT RELAY
REL2 -->
REL3 -->
REL4 -->
DI.HI -->
xxxx -->
REL.U
PERC -->
DISP -->
TYPE
PT
-->
NI
-->
TC
-->
PT.TY
10
-->
20
-->
50
-->
100
-->
200
-->
250
-->
300
-->
400
-->
500
-->
1000 -->
NI.TY
50
-->
100
-->
120
-->
1000 -->
CONN
2W
-->
3W
-->
4W
-->
TC.TY
TC. B -->
TC. E -->
TC. J -->
TC. K -->
TC. L -->
TC. N -->
TC. R -->
TC. S -->
TC. T -->
TC. U -->
TC.W3 -->
TC.W5 -->
TC.LR -->
DEC.P
1111 -->
111.1 -->
SETP
xxxx --> RELAY SETPOINT - PRESS OK TO SAVE
Fastset (Disabled):
SETP
xxxx --> RELAY SETPOINT - READ ONLY
Configuration menus:
LANG
DE
--> DE - WAEHLE DEUTSCHEN HILFETEXT
DK
--> DK - VAELG DANSK HJAELPETEKST
ES
--> ES - SELECCIONAR TEXTO DE
AYUDA EN ESPANOL
FR
--> FR - SELECTION TEXTE D’AIDE
EN FRANCAIS
IT
--> IT - SELEZIONARE TESTI DI
AIUTO ITALIANI
SE
--> SE - VALJ SVENSK HJALPTEXT
UK
--> UK - SELECT ENGLISH HELPTEXT
CZ
--> CZ - VYBER CESKOU NAPOVEDU
PASS
xxxx --> SET CORRECT PASSWORD
IN
C.LIN* -->
CURR -->
VOLT -->
POTM -->
TEMP -->
RANG
0-20 -->
4-20 -->
RANG
0-10 -->
2-10 -->
0.0-1 -->
0.2-1 -->
CA.LO
YES -->
NO
-->
18
TEXT ENTERED BY USER IN PRESET
CURRENT INPUT
VOLTAGE INPUT
POTENTIOMETER INPUT
TEMPERATURE SENSOR INPUT
When current selected:
INPUT RANGE IN mA
INPUT RANGE IN mA
When voltage selected:
INPUT RANGE IN VOLT
INPUT RANGE IN VOLT
INPUT RANGE IN VOLT
INPUT RANGE IN VOLT
CALIBRATE POTENTIOMETER LOW
CALIBRATE POTENTIOMETER LOW
5715V101
CALIBRATE POTENTIOMETER HIGH
CALIBRATE POTENTIOMETER HIGH
DECIMAL
DECIMAL
DECIMAL
DECIMAL
POINT
POINT
POINT
POINT
POSITION
POSITION
POSITION
POSITION
DISPLAY READOUT LOW
DISPLAY READOUT HIGH
SET RELAY IN PERCENTAGE
SET RELAY IN DISPLAY UNITS
SELECT PT SENSOR TYPE
SELECT NI SENSOR TYPE
SELECT TC SENSOR TYPE
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
PT
PT
PT
PT
PT
PT
PT
PT
PT
PT
SENSOR
SENSOR
SENSOR
SENSOR
SENSOR
SENSOR
SENSOR
SENSOR
SENSOR
SENSOR
TYPE
TYPE
TYPE
TYPE
TYPE
TYPE
TYPE
TYPE
TYPE
TYPE
SELECT
SELECT
SELECT
SELECT
NI
NI
NI
NI
SENSOR
SENSOR
SENSOR
SENSOR
TYPE
TYPE
TYPE
TYPE
When Pt and Ni sensor selected
SELECT 2-WIRE SENSOR CONNECTION
SELECT 3-WIRE SENSOR CONNECTION
SELECT 4-WIRE SENSOR CONNECTION
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
TC
TC
TC
TC
TC
TC
TC
TC
TC
TC
TC
TC
TC
SENSOR
SENSOR
SENSOR
SENSOR
SENSOR
SENSOR
SENSOR
SENSOR
SENSOR
SENSOR
SENSOR
SENSOR
SENSOR
TYPE
TYPE
TYPE
TYPE
TYPE
TYPE
TYPE
TYPE
TYPE
TYPE
TYPE
TYPE
TYPE
When temperature selected
DECIMAL POINT POSITION
DECIMAL POINT POSITION
CONTENTS
UNIT
°C
-->
°F
-->
REL1
SET
-->
SKIP -->
OFF -->
SETP
xxxx -->
ACT1
INCR -->
DECR -->
HYS1
xxxx -->
ERR1
HOLD -->
ACTI -->
DEAC -->
NONE -->
ON.DE
xxxx -->
OF.DE
xxxx -->
REL2
SET
-->
SKIP -->
OFF -->
SETP
xxxx -->
ACT2
INCR -->
DECR -->
HYS2
xxxx -->
ERR2
HOLD -->
ACTI -->
DEAC -->
NONE -->
ON.DE
xxxx -->
OF.DE
xxxx -->
REL3
SET
-->
SKIP -->
OFF -->
SETP
xxxx -->
ACT3
INCR -->
DECR -->
HYS3
DISPLAY AND RELAY SETUP IN CELSIUS xxxx -->
DISPLAY AND RELAY SETUP IN
FAHRENHEIT
ERR3
HOLD -->
ACTI -->
ENTER RELAY 1 SETUP
DEAC -->
SKIP RELAY 1 SETUP
NONE -->
RELAY 1 DISABLED
ON.DE
xxxx -->
RELAY SETPOINT
OF.DE
xxxx -->
ACTIVATE AT INCREASING SIGNAL
ACTIVATE AT DECREASING SIGNALL
REL4
SET
-->
SKIP -->
RELAY HYSTERESIS
OFF -->
SETP
HOLD RELAY AT ERROR
xxxx -->
ACTIVATE RELAY AT ERROR
DEACTIVATE RELAY AT ERROR
ACT4
UNDEFINED STATUS AT ERROR
INCR -->
DECR -->
RELAY ON-DELAY IN SECONDS
HYS4
xxxx -->
RELAY OFF-DELAY IN SECONDS
ERR4
HOLD -->
ACTI -->
ENTER RELAY 2 SETUP
DEAC -->
SKIP RELAY 2 SETUP
NONE -->
RELAY 2 DISABLED
ON.DE
xxxx -->
RELAY SETPOINT
OF.DE
xxxx -->
ACTIVATE AT INCREASING SIGNAL
ACTIVATE AT DECREASING SIGNAL
A.OUT
0-20 -->
4-20 -->
RELAY HYSTERESIS
20-0 -->
20-4 -->
HOLD RELAY AT ERROR
O.LO
ACTIVATE RELAY AT ERROR
xxxx -->
DEACTIVATE RELAY AT ERROR
UNDEFINED STATUS AT ERROR
O.HI
xxxx -->
RELAY ON-DELAY IN SECONDS
O.ERR
23 mA -->
3,5 mA -->
RELAY OFF-DELAY IN SECONDS
0mA -->
NONE -->
ENTER RELAY 3 SETUP
RESP
SKIP RELAY 3 SETUP
xxx,x -->
RELAY 3 DISABLED
E.PAS
RELAY SETPOINT
NO
-->
YES -->
ACTIVATE AT INCREASING SIGNAL
N.PAS
ACTIVATE AT DECREASING SIGNAL
xxxx -->
CONTENTS
5715V101
RELAY HYSTERESIS
HOLD RELAY AT ERROR
ACTIVATE RELAY AT ERROR
DEACTIVATE RELAY AT ERROR
UNDEFINED STATUS AT ERROR
RELAY ON-DELAY IN SECONDS
RELAY OFF-DELAY IN SECONDS
ENTER RELAY 4 SETUP
SKIP RELAY 4 SETUP
RELAY 4 DISABLED
RELAY SETPOINT
ACTIVATE AT INCREASING SIGNAL
ACTIVATE AT DECREASING SIGNALL
RELAY HYSTERESIS
HOLD RELAY AT ERROR
ACTIVATE RELAY AT ERROR
DEACTIVATE RELAY AT ERROR
UNDEFINED STATUS AT ERROR
RELAY ON-DELAY IN SECONDS
RELAY OFF-DELAY IN SECONDS
OUTPUT
OUTPUT
OUTPUT
OUTPUT
RANGE
RANGE
RANGE
RANGE
IN
IN
IN
IN
mA
mA
mA
mA
DISPLAY VALUE FOR OUTPUT LOW
DISPLAY VALUE FOR OUTPUT HIGH
NAMUR NE43 UPSCALE AT ERROR
NAMUR NE43 DOWNSCALE AT ERROR
DOWNSCALE AT ERROR
UNDEFINED OUTPUT AT ERROR
ANALOGUE OUTPUT RESPONSE TIME
IN SECONDS
ENABLE PASSWORD PROTECTION
ENABLE PASSWORD PROTECTION
SELECT NEW PASSWORD
19
Configuration / operating
the function keys
Documentation for the routing diagram
In general:
When configuring the display you are guided through all parameters, allowing
you to choose the settings which fit the application. For each menu there is
a scrolling help text which is automatically shown in the display if no key has
been activated for appr. 5 seconds.
Configuration is carried out by way of the 3 function keys 1 2 and 3.
1 will increase the numerical value or choose the next parameter. 2 will
decrease the numerical value or choose the previous parameter. 3 will
accept the chosen value and go to the next menu. If a function does not exist
in the hardware, all parametres belonging to that function will be skipped in
order to make configuration as simple as possible. The configuration will not
be saved until the end of the menu structure when the display shows - - - -.
Pressing and holding 3 will return to the previous menu or go back to the
default state (1.0) without saving the changed values or parameters.
If no key is activated for 2 minutes, the display will return to the default state
(1.0) without saving the changed values or parameters.
Furhter explanations:
Fast setpoint adjustment and relay test: These menus are interactive and
allow you to adjust the setpoints while the display is measuring the input signal. The diodes will then indicate when the relays change state, thus easing
the setpoint adjustment in many situations. By activating 1 and 2 simultaneously, a relay test will be initiated and the relay will change state. The setpoint adjustment will be saved by a quick press of 3 . Holding down 3 for
more that 0.5 seconds wil return the display to the default state (1.0) without
changing the setpoint.
Password protection: Using a password will block access to the menu and
parameters. There are two levels of password protection. Passwords be­tween
0000 and 4999 allow access to the fast setpoint adjustment and relay test
menus (using this password blocks access to all other parts of the menu).
Passwords between 5000 and 9999 block access to all parts of the menu,
fast setpoint and relay test (current setpoint is still shown). Default password
2008 allows access to all configuration menus.
20
5715V101
CONTENTS
Programming via PC
By way of PReset, a simple yet sophisticated PC program, all operational
parameters in the 5715 can be quickly configured to suit any application.
Furthermore, the PC configuration allows you to set up a customer-defined
input type for the input signals current, voltage and potentiometer. This input
type can be defined with special input spans, e.g. 5...12 mA, and customerdefined linearisation with or without offset. The customer-defined input type
is saved in the 5715 in the input menu C.LIN. If the display is later configured by way of the front keys for e.g. temperature input, the input type C.LIN
containing all the original parameters can be subsequently selected. The PC
configuration is sent to the display by way of the communications interface
USB Loop Link.
Graphic depiction of the relay function setpoint
100
100
Relay units
90
90
80
80
70
70
60
60
50
Relay units
Hysteresis = 10
50
Setpoint = 50
40
Setpoint = 50
40
Hysteresis = 10
30
30
20
Off N.O.
On N.O.
Off N.O.
20
Off N.O.
On N.O.
Off N.O.
10
On N.C.
Off N.C.
On N.C.
10
On N.C.
Off N.C.
On N.C.
0
10
20
30
40
50
t
60
70
80
90
100
0
Relay action: Increasing
CONTENTS
10
20
30
40
50
t
60
70
80
90
100
Relay action: Decreasing
5715V101
21
Displays
Programmable displays with a wide
selection of inputs and outputs for display of temperature,
volume and weight, etc. Feature linearisation, scaling,
and difference measurement functions for programming
via PReset software.
Ex interfaces Interfaces for analogue and digital
signals as well as HART® signals between sensors / I/P
converters / frequency signals and control systems in Ex
zone 0, 1 & 2 and for some modules in zone 20, 21 & 22.
Galvanic isolators for analogue and
Isolation
digital signals as well as HART® signals. A wide product
range with both loop-powered and universal isolators
featuring linearisation, inversion, and scaling of output
signals.
Temperature A wide selection of transmitters for DIN
form B mounting and DIN rail modules with analogue
and digital bus communication ranging from applicationspecific to universal transmitters.
Universal
PC or front programmable modules with
universal options for input, output and supply. This range
offers a number of advanced features such as process
calibration, linearisation and auto-diagnosis.
 www.prelectronics.fr
 [email protected]
 www.prelectronics.de
 [email protected]
 www.prelectronics.es
 [email protected]
 www.prelectronics.it
 [email protected]
 www.prelectronics.se
 [email protected]
 www.prelectronics.co.uk
 [email protected]
 www.prelectronics.com
 [email protected]
Head office
Denmark
PR electronics A/S
Lerbakken 10
DK-8410 Rønde
www.prelectronics.com
[email protected]
tel. +45 86 37 26 77
fax +45 86 37 30 85
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement