Onkyo DV-L5 User Guide Manual Operating Instruction Pdf

Onkyo DV-L5 User Guide Manual Operating Instruction Pdf

DVD Player

DV-L5

Instruction Manual

Contents

Before Using Your DVD Player 2

Getting Started

Basic Playback

Advanced Playback

Thank you for purchasing the ONKYO DVD Player.

Please read this manual thoroughly before making connections and plugging in the unit.

Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new DVD Player.

Please retain this manual for future reference.

Function Setup

Others

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

SN 29343149 DV-L5E

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

Important Safeguards

1.

Read Instructions – All the safety and operating instructions should be read before the appliance is operated.

2.

Retain Instructions – The safety and operating instructions should be retained for future reference.

3.

Heed Warnings – All warnings on the appliance and in the operating instructions should be adhered to.

4.

Follow Instructions – All operating and use instructions should be followed.

5.

Cleaning – Unplug the appliance from the wall outlet before cleaning. The appliance should be cleaned only as recommended by the manufacturer.

6.

Attachments – Do not use attachments not recommended by the appliance manufacturer as they may cause hazards.

7.

Water and Moisture – Do not use the appliance near water –for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

8.

Accessories – Do not place the appliance on an unstable cart, stand, tripod, bracket, or table. The appliance may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the appliance.

Any mounting of the appliance should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

PORTABLE CART WARNING

9.

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

S3125A

10. Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the appliance and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the appliance on a bed, sofa, rug, or other similar surface. The appliance should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. There should be free space of at least 5 cm (2 in.) and an opening behind the appliance.

11. Power Sources – The appliance should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company.

12. Grounding or Polarization – The appliance may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

13. Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

14. Lightning – For added protection for the appliance during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the appliance due to lightning and power-line surges.

15. Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

16. Object and Liquid Entry – Never push objects of any kind into the appliance through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the appliance.

17. Servicing – Do not attempt to service the appliance yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

18. Damage Requiring Service – Unplug the appliance form the wall outlet and refer servicing to qualified service personnel under the following conditions:

A. When the power-supply cord or plug is damaged,

B. If liquid has been spilled, or objects have fallen into the appliance,

C. If the appliance has been exposed to rain or water,

D. If the appliance does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the appliance to its normal operation,

E. If the appliance has been dropped or damaged in any way, and

F. When the appliance exhibits a distinct change in performance – this indicates a need for service.

19. Replacement Parts – When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

20. Safety Check – Upon completion of any service or repairs to the appliance, ask the service technician to perform safety checks to determine that the appliance is in proper operation condition.

21. Wall or Ceiling Mounting – The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.

22. Heat – The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

SN 29343149 DV-L5E

Precautions

This unit contains a semiconductor laser system and is classified as a “CLASS 1 LASER PRODUCT”. So, to use this model properly, read this Instruction Manual carefully. In case of any trouble, please contact the store where you purchased the unit.

To prevent being exposed to the laser beam, do not try to open the enclosure.

CAUTION:

VISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK

FAILED OR DEFEATED. DO NOT STARE INTO BEAM.

CAUTION:

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR

ADJUSTMENTS OR PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.

For U.S. model

The laser is covered by a housing which prevents exposure during operation or maintenance. However, this product is classified as a

Laser Product by CDRH (Center for Devices and Radiological

Health) which is a department of the Food and Drug Administration.

According to their regulations 21 CFR section 1002.30, all manufactures who sell Laser Products must maintain records of written communications between the manufacturer, dealers and customers concerning radiation safety. If you have any complaints about instructions or explanations affecting the use of this product, please feel free to write to the address on the back page of this manual. When you write us, please include the model number and serial number of your unit.

In compliance with Federal Regulations, the certification, identification and the period of manufacture are indicated on the rear panel.

FCC INFORMATION FOR USER

CAUTION:

The user changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The label on the right is applied on the rear panel except for USA and Canadian models.

“CLASS 1 LASER

PRODUCT ”

1. This unit is a CLASS 1 LASER PRODUCT and employs a laser inside the cabinet.

2. To prevent the laser from being exposed, do not remove the cover. Refer servicing to qualified personnel.

For Canadian model

This class B digital apparatus complies with Canadian ICES-003.

For models having a power cord with a polarized plug:

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

Modele pour les Canadien

Cet appareil numérique de la classe B est conforme à la norme

NMB-003 du Canada.

Sur les modeles dont la fiche est polarisee:

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA

BORNE CORRESPONDANTE DE LA PRISE ET POUSSER

JUSQU’AU FOND.

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

3

SN 29343149 DV-L5E

Precautions

1. Regional Restriction Codes (Region Number)

Regional restriction codes are built into DVD players and DVD videos for each sales region. If the regional code of the DVD Player does not match one of the regional codes on the DVD video, playback is not possible.

The regional number can be found on the rear panel of the DVD

Player. (e.g.

1

for Region 1)

2. About This Manual

This manual explains the basic procedures for operating the DVD

Player. Some DVD videos do not support the full potential of the

DVD technology. Your DVD Player may therefore not respond to all operating commands. Refer to instruction notes on discs.

A “ ” mark may appear on the TV screen during operation. It means that the operation is not permitted by the DVD player or the disc.

3.

Recording Copyright

Recording of copyrighted material for other than personal use is illegal without permission of the copyright holder.

4.

Power

WARNING

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ

THE FOLLOWING SECTION CAREFULLY.

The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where the unit will be used meets the required voltage (e.g.,

AC100-240V, 50/60Hz) written on the rear panel.

5.

Do not touch the unit with wet hands

Do not handle the unit or mains lead when your hands are wet or damp. If water or any other liquid enters the case, take the unit to an authorized service center for inspection.

6. Location of the unit

• Place the unit in a well-ventilated location.

Take special care to provide plenty of ventilation on all sides of the unit especially when it is placed in an audio rack. If ventilation is blocked, the unit may overheat and malfunction.

• Do not expose the unit to direct sunlight or heating units as the unit's internal temperature may rise and shorten the life of the pickup.

• Avoid damp and dusty places and places directly affected by vibrations from the speakers. In particular, avoid placing the unit on or above one of the speakers.

• Be sure the unit is placed in a horizontal position. Never place it on its side or on a slanted surface as it may malfunction.

• When you place the unit near a TV, radio, or VCR, the playback picture may become poor and the sound may be distorted. In this case, place the unit away from the TV, radio, or VCR.

7. Care

From time to time you should wipe the front and rear panels and the cabinet with a soft cloth. For heavier dirt, dampen a soft cloth in a weak solution of mild detergent and water, wring it out dry, and wipe off the dirt. Following this, dry immediately with a clean cloth.

Do not use rough material, thinners, alcohol or other chemical solvents or cloths since these could damage the finish or remove the panel lettering.

8. Notes on Handling

• When shipping the unit, use the original shipping carton and packing materials. For maximum protection, repack the unit as it was originally packed at the factory.

• Do not use volatile liquids, such as insect spray, near the unit.

Do not leave rubber or plastic products in contact with the unit for a long time. They will leave marks on the finish.

• The top and rear panels of the unit may become warm after a

long period of use. This is not a malfunction.

• When the unit is not in use, be sure to remove the disc and turn off the power.

• If you do not use the unit for a long period, the unit may not function properly in the future. Turn on and use the unit occasionally.

9.

To Obtain a Clear Picture

The unit is a high technology, precision device. If the optical pickup lens and disc drive parts are dirty or worn down, the picture quality becomes poor. To obtain a clear picture, we recommend regular inspection and maintenance (cleaning or parts replacement) every 1,000 hours of use depending on the operating environment. For details, contact your nearest dealer.

10. Notes on Moisture Condensation

Moisture condensation damages the unit.

Please read the following carefully.

• What is moisture condensation?

Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day. Drops of water form on the outside of the glass. In the same way, moisture may condense on the optical pick-up lens inside the unit, one of the most crucial internal parts of the unit.

• Moisture condensation occurs in the following cases.

– When you bring the unit directly from a cold place to a warm place.

– When you use the unit in a room where you just turned on the heater, or a place where the cold wind from the air conditioner directly hits the unit.

– In summer, when you use the unit in a hot and humid place just after you move the unit from an air conditioned room.

– When you use the unit in a humid place.

• Do not use the unit when moisture condensation may occur.

If you use the unit in such a situation, it may damage discs and internal parts. Remove the disc, connect the mains lead of the unit to the mains, turn on the unit, and leave it for two or three hours. After a few hours, the unit will have warmed up and evaporated any moisture. Keep the unit connected to the mains and moisture condensation will seldom occur.

SN 29343149 DV-L5E

Notes on Discs

This section shows you how to handle, clean, and store discs.

Playable Discs

This DVD Player can playback the following discs.

Disc mark

DVD videos

VIDEO CDs

About VIDEO CDs

This DVD Player supports VIDEO CDs equipped with the PBC

(Version 2.0) function. (PBC is the abbreviation of Playback Control.)

You can enjoy two playback variations depending on the type of disc.

• VIDEO CD not equipped with PBC function (Version 1.1)

Sound and movies can be played on this DVD Player in the same way as an audio CD.

• VIDEO CD equipped with PBC function (Version 2.0)

In addition to operation of the VIDEO CD not equipped with the

PBC function, you can enjoy playback with interactive software and search function using the menu displayed on the TV screen (Menu Playback). Some of the functions described in this Instruction Manual may not work with some discs.

*1 *1

Audio CDs

*

1

This unit can play CD-R and CD-RW discs recorded in CD

Audio or Video CD format, or with MP3 audio files.

• You cannot playback discs other than those listed above.

• You cannot play discs such as CD-ROM, DVD-RAM, DVD-

RW, etc., even if the marks in the above table are labeled on those discs.

• This DVD Player uses the PAL/NTSC color system, and cannot playback DVD videos recorded in any other color system (SECAM, etc.).

• Avoid using heart-shaped or octagonal discs. Playing irregularly shaped discs may damage the internal mechanism of the DVD Player.

• Do not use discs that have residue from adhesive tape, rental discs that have peeling labels, or discs that have custom labels or stickers. Otherwise, you may not be able to eject the discs or the DVD Player may become inoperative.

MP3 compatibility information

• The CD-ROM must be ISO 9660 compatible.

• Files should be MPEG1 Audio Layer 3 format, 44.1 or

48kHz, fixed bit-rate. Incompatible files will not play and

“UNPLAYABLE MP3 FORMAT” will be displayed.

• Not compatible with variable bit-rate (VBR) files.

• This system only plays tracks that are named with the file extension “.mp3” or “.MP3”.

• This system is not compatible with multi-session discs. If you try an play a multi-session disc, only the first session will be played.

• Use CD-R or CD-RW media for recording your MP3 files.

The disc must be finalized in order to play.

• Audio encoded at 128Kbps should sound close to regular audio CD quality. Although this system will play lower bitrate MP3 tracks, the sound quality becomes noticeably worse at lower bit-rates.

• Only the first 8 characters of folder and track names

(excluding the “.mp3” extension) are displayed.

• This system can recognize a maximum of 250 folders and

250 tracks. Discs containing more than 250 folders or tracks will not play.

Notes on Copyright

It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, and rent copyrighted material without permission.

DVD videos are copy protected, and any recordings made from these discs will be distorted.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

SN 29343149 DV-L5E

5

Notes on Discs

Handling Discs

• Do not touch the playback side of the disc.

• Do not attach paper or tape to discs.

Playback side

Differences in Disc Composition

DVD

All discs are divided up into smaller, more manageable sections so that you can find specific content more easily.

DVD discs are divided into one or more titles. Each title may be further divided into several chapters. Occassionally, a chapter may contain index points, effectively dividing the chapter up into several parts, too.

Chapter 1

Title 1

Chapter 2 Chapter 1

Title 2

Chapter 2

Cleaning Discs

• Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the center outwards with a soft cloth. Always keep the disc clean.

DVD

Video CD/CD

Video CDs and CDs are divided into a number of tracks. In rare cases, a track may contain a number of index points, effectively dividing the track up into several parts.

Track 1 Track 2 Track 3 Track 4

• If you cannot wipe off the dust with a soft cloth, wipe the disc lightly with a slightly moistened soft cloth and finish with a dry cloth.

• Do not use any type of solvent such as thinner, benzine, commercially available cleaners or antistatic spray for vinyl

LPs. It may damage the disc.

Storing Discs

• Do not store discs in a place subject to direct sunlight or near heat sources.

• Do not store discs in places subject to moisture and dust such as a bathroom or near a humidifier.

• Store discs vertically in a case. Stacking or placing objects on discs outside of their case may cause warping.

Track 1

Video CD

Track 2 Track 3 Track 4 Track 5

CD

MP3

MP3 (MPEG1 audio layer 3) is a compressed audio file format. Files are recognized by their file extension “.mp3” or

“.MP3”. Folders that contain MP3 files are automatically numbered F_001, F_002, etc. Tracks within folders are automatically numbered T_001, T_002, etc.

Track 1

Folder 1

Track 2 Track 3

Folder 2

Track 1 Track 2

MP3

SN 29343149 DV-L5E

Table of Contents

Important Safeguards/Precautions/Notes on Discs/Table of Contents ............. 2–7

Getting Started

Features/Supplied Accessories ............................................................................. 8

Preparing the Remote Controller .......................................................................... 9

Index to Parts and Controls ................................................................................ 10

Connecting to a TV ............................................................................................. 13

Connecting to an Amplifier (To Enjoy the Sound Advantage of the DVD Player) ...... 14

Connecting the Power/Turning on the DVD Player ............................................. 15

Setting Up the Player .......................................................................................... 16

Basic Playback

Getting Started Using Your DVD Player .............................................................. 19

Advanced Playback

Still Frame/Slow Play .......................................................................................... 23

Locating a Specific Title/Folder/Chapter/Track/Location ..................................... 24

Repeat Play ........................................................................................................ 26

Random Play ...................................................................................................... 27

Playing in a Favorite Order ................................................................................. 28

Selecting the Camera Angle ............................................................................... 32

Selecting the Audio/Subtitle Language ............................................................... 33

Continuing Playback from a Specified Location (Last Memory) ......................... 34

Memorizing Settings for Often Viewed DVDs (Condition Memory) ..................... 35

Viewing Disc Information ..................................................................................... 36

Function Setup

Adjusting Audio and Video Settings .................................................................... 38

Others

Pre-programming remote controller .................................................................... 55

Troubleshooting .................................................................................................. 57

Specifications ...................................................................................................... 59

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

SN 29343149 DV-L5E

7

Getting Started

Features/Supplied Accessories

Features

Plays DVDs, MP3 CDs, CD-Rs, CD-RWs, Video CDs and Audio CDs

192 kHz/24-Bit Audio DAC

Direct Digital Path

Optical & Coaxial Digital Outputs for DTS*

1

/Dolby*

2

Digital/PCM

96 kHz or 48 kHz Selectable Digital Out

Dedicated Subwoofer Pre Out

Onscreen Display

Full-Function z compatible remote control

Preprogrammed (Multibrand for TVs) Full-Function Remote Control

(USA and Canadian models only)

*

1

*

2

“DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc.

Manufactured under license from Dolby

Laboratories.

“Dolby”, “Pro Logic” and the double-D symbol

Ÿ are trademarks of Dolby Laboratories.

Confidential Unpublished Works. ©1992-1997

Dolby Laboratories, Inc. All rights reserved.

Supplied Accessories

Make sure your box contains everything listed below.

If any pieces are missing, contact your nearest ONKYO dealer.

The number of accessories is indicated in brackets.

Remote controller [1]

(RC-449DV for USA and Canadian models,

RC-450DV for other models)

Batteries (size AA/UM-3) [2]

S-video cable [1]

Audio/video connection cable [1]

z

cable [1]

Optical digital cable [1]

SN 29343149 DV-L5E

Preparing the Remote Controller

Inserting the Batteries

1

Open the battery compartment cover.

Using the Remote Controller

Point the remote controller toward the remote control sensor.

Remote control sensor

ENTER

30˚

30˚

2

Insert the two R6 (size AA) batteries.

Be sure to match the + and – ends of the batteries with the diagram inside the battery compartment.

About 5 m

3

Close the battery compartment cover.

Notes

• Place the unit away from strong light such as direct sunlight or inverted fluorescent light which can prevent proper operation of the remote controller.

• Using another remote controller of the same type in the same room or using the unit near equipment which uses infrared rays may cause operational interference.

• Do not put any object such as a book on the remote controller. The buttons of the remote controller may be pressed by mistake and drain the batteries.

• Make sure the audio rack doors do not have colored glass. Placing the unit behind such doors may prevent proper remote controller operation.

• If there is any obstacle between the remote controller and the remote control sensor, the remote controller will not operate.

Notes

• Do not mix new batteries with old batteries or different kinds of batteries.

• To avoid corrosion, remove the batteries if the remote controller is not to be used for a long time.

• Remove dead batteries immediately to avoid damage from corrosion. If the remote controller does not operate smoothly, replace both batteries at the same time.

• The life of the batteries supplied is about six months but this will vary depending on usage.

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

SN 29343149 DV-L5E

9

Index to Parts and Controls

For operational instructions, see the page indicated in brackets [ ].

Front panel

1 POWER switch [15]

Turns on the main power supply for the DV-L5. The DV-L5 enters standby state. Pressing the switch again to the off position ( —

OFF) shuts down the main power supply into the DV-L5.

Before turning on the power, make sure all cables are properly connected.

2 STANDBY/ON button / STANDBY/ON indicator

[15, 16, 19, 22, 38, 54]

When STANDBY/ON button is pressed to ON while the POWER switch is set to ON, the DV-L5 turns on. The STANDBY indicator turns off and the ON indicator lights up. Pressing the button again returns the DV-L5 to the standby state. This state turns off the display, disables control functions.

3 Disc tray [19]

When loading a disc, place discs in the disc tray with the label side facing up.

4 Remote control sensor [9]

Point the remote control toward the remote sensor to operate the player.

5 Display [11]

6 TOP MENU button [20, 24]

Press to call up the top menu programmed on the DVD.

Depending on the DVD, the top menu may be identical to the

DVD menu.

7 Cursor button/ENTER button

[16, 19, 20, 25, 27-31, 37, 38, 44, 45, 49, 51, 52, 54]

Use cursor button to move through the options on menu screens and to change settings. Use ENTER to implement settings selected with the cursor buttons or to set items highlighted in a menu.

8 MENU button [20, 25, 32, 33, 48]

Use to display or close the DVD menu or MP3 Navigator screen.

9 7 button [16, 20, 22, 28, 30, 34]

Press to stop playback. Pressing once enables playback to resume from a point shortly before the location where it stopped.

Pressing twice causes the disc to return to the beginning of the disc if playback starts again.

0 £ button [19, 21-24, 26-28, 30, 34]

Press to start or resume playback.

- 0 button [19, 22]

Press to open and close the disc tray.

= CLEAR button [25-30, 33-35, 49]

Works in conjunction with a number of player functions. Use to cancel repeat and random playback, and to edit programs.

~ REPEAT button [26]

Use to set the repeat mode.

! RANDOM button [27]

Press to play chapters/tracks in random order.

@ LAST MEMORY button [34]

You can resume DVD or Video CD playback from the point you last watched even if the disc is removed from the player. Press

LAST MEMORY during playback to set a Last Memory point.

When you want to resume playback of that disc, press LAST

MEMORY in the stop mode and playback starts from the memorized point. Last Memory locations can be stored for up to 5

DVDs and 1 Video CD.

# DISPLAY button [36, 37, 45]

Press during playback to display statistical disc information.

Press repeatedly to display different information.

$ 4/¢ button [20, 21]

Press to go back or advance to previous chapters/tracks. Press and hold to perform fast-reverse/fast-forward playback scanning.

% RETURN button [20, 38, 49, 52]

Use to go one menu back (current settings are maintained). Use

RETURN when you do not want to change the option setting in a menu.

^ SETUP button [16, 38, 39, 54]

Press when the player is in either play or stop mode to open and close the Setup screen.

& 8 button [23]

Press during playback to pause. Press again to resume playback.

SN 29343149 DV-L5E

Display

1 £/8 indicator

2 Inserted disc indicator

3 TITLE indicator

4 Angle icon indicator

5 CHAPTER/TRACK indicator

6 REPEAT indicator

7 REMAIN indicator

1

DVD

D

DTS

GUI

2 3

V C D

TITLE

4 5 6 7

CHAPTER TRACK

REPEAT

REMAIN

0 = ~

8 9

LAST

COND.

8 LAST indicator

9 COND. indicator

0 ŸD indicator

- DTS indicator

= GUI indicator

~ Multifunctional indicator

(e.g. operating status and error messages)

Rear panel

1 2 3

VIDEO OUTPUT

Y

C

B

VIDEO

C

R

S VIDEO COMPONENT

4 5 6 7

MONO

L

R

ANALOG

OUTPUT

DIGITAL

OUTPUT

OPTICAL COAXIAL

REMOTE

CONTROL

W

8

1 VIDEO OUTPUT VIDEO jack [13]

Connect to the video input on a TV or monitor or AV amplifier or receiver with video input capability.

2 VIDEO OUTPUT S VIDEO jack [13]

If your TV or monitor has an S-video input, clear picture reproduction is possible by connecting the player to your TV or monitor via the S-Video jack.

You can switch between [S1] and [S2] S-video output from the

Setup menu.

3 VIDEO OUTPUT COMPONENT jacks [13]

If your TV or monitor has component video inputs, you can produce a higher quality picture on your TV or monitor by connecting to the component video outputs on this unit.

4 ANALOG OUTPUT jacks [13, 14]

Use to output two-channel audio (analog) to the audio stereo inputs on a TV or stereo amplifier. If you are connecting to a receiver that has both digital and analog input jacks for DVD player connection, it may be beneficial to make both connections.

5 DIGITAL OUTPUT OPTICAL jack [14]

Use to output the digital audio signal recorded on discs. You can output the digital signal via the optical output jack to an AV amplifier or receiver.

6 DIGITAL OUTPUT COAXIAL jack [14]

Use to output the digital audio signal recorded on discs. You can output the digital signal via the coaxial output jack to an AV amplifier or receiver.

7 z jack [14]

Use to connect this player to another component bearing the z mark. This lets you control this unit as though it were a component in a system.

8 AC OUTLET

The AC power cord of another component can be connected to this AC OUTLET connector.

This means that if the DV-L5 is plugged into an AC outlet, AC power is available to this AC OUTLET even if the DV-L5 is off.

The shape and capacity of the AC outlet may differ depending on the area of purchase. Make sure that the capacity of other components connected to this unit does not exceed the capacity that is printed on the rear panel.

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

11

SN 29343149 DV-L5E

Index to Parts and Controls

Remote controller (The illustration shows the RC-449DV remote controller.)

1

3

2

5

4

6

7

9

8

0

-

=

!

~

ON

TV

ON / STANDBY

STANDBY

ANGLE AUDIO

OPEN / CLOSE

SUBTITLE

LAST M COND. M DIMMER DISPLAY

TOP MENU MENU

CH -

RETURN

TV/ VCR

PAUSE STOP

VOL +

ENTER

VOL -

FR FF

CH +

SETUP

PLAY

DOWN UP

1 2 3

STEP/ SLOW

+

4 5 6

-

FUNCTION M

7 8 9

+10

0

RANDOM REPEAT

SEARCH CLEAR

A-B PROGRAM

DVD TV

@

#

$

%

^

&

*

(

)

_

+

¡

£

¢

§

1 ON button [15, 16, 19, 22, 38, 55]

Press to switch the player on.

2 STANDBY button [15, 22, 34, 55]

Press to put the player in standby.

3 ANGLE button [32]

Some DVDs are recorded with various camera angle playback options. Press ANGLE repeatedly to display different camera angles.

4 LAST MEMORY button [34]

You can resume DVD or Video CD playback from the point you last watched even if the disc is removed from the player. Press

LAST MEMORY during playback to set a Last Memory point.

When you want to resume playback of that disc, press LAST

MEMORY in the stop mode and playback starts from the memorized point. Last Memory locations can be stored for up to 5

DVDs and 1 Video CD.

5 COND. M button [35]

You can store in memory the settings for up to 15 DVDs. Press

COND. M during DVD playback to memorize the settings.

6 TOP MENU button* [20, 24]

Press to call up the top menu programmed on the DVD.

Depending on the DVD, the top menu may be identical to the DVD menu.

7 Cursor buttons (2/3/5/∞)* [16, 19, 20, 25, 28-31, 37, 38]

Use to move through the options on menu screens and to change settings.

CH +/–, VOL +/– buttons [55] (USA and Canadian models only)

8 RETURN button* [20, 38, 49, 52]

Use to go one menu back (current settings are maintained). Use

RETURN when you do not want to change the option setting in a menu.

TV/VCR button [55] (USA and Canadian models only)

9 PAUSE 8 button [23]

Press to pause playback of a disc. Press again to resume playback.

0 STOP 7 button [16, 20, 22, 28, 30, 34]

Press to stop playback. Pressing once enables playback to resume from a point shortly before the location where it was stopped. Pressing twice causes the disc to return to the beginning of the disc when playback starts again.

- FR/FF 1/¡ buttons [21]

During playback of DVD and Video CD, press

¡ to perform fast forward scanning or

1 to perform fast reverse scanning of DVD and Video CD. When a CD or MP3 is loaded, audio scanning is performed.

= Number buttons (1-9, 0, +10)* [19-21, 24-30, 49, 51, 52, 55]

Use to perform direct title/folder and chapter/track searches, and to input numerical values.

~ RANDOM button [27]

Press to play chapters/tracks in random order.

! REPEAT button [26]

Use to set the repeat mode.

@ OPEN/CLOSE 0 button [19, 22]

Press to open or close the disc tray.

# SUBTITLE button [33, 48, 49]

Press repeatedly to select one of the subtitle languages programmed on a DVD or to turn the subtitles off.

$ AUDIO button [33, 47]

Press repeatedly to select one of the audio languages programmed on a DVD.

For Video CD, CD and MP3, each press changes the audio output as follows.

→ Stereo → 1L(Left) → 2/R(Right)

% DISPLAY button [36, 37, 45]

Press during playback to display statistical disc information.

Press repeatedly to display different information.

^ DIMMER button [37]

Toggle to control the lightness of the display.

& MENU button* [20, 25, 32, 33, 48]

Use to display or close the DVD menu or MP3 Navigator screen.

* ENTER button*

[16, 19, 20, 25, 27-31, 38, 44, 45, 49, 51, 52, 54, 55]

Use to implement settings selected with the cursor buttons or to set items highlighted in a menu.

( SETUP button* [16, 38, 39, 54]

Press when the player is in either play or stop mode to open and close the Setup screen.

) PLAY £ button [19, 21-24, 26-28, 30, 34]

Press to start or resume playback.

_ UP/DOWN 4/¢ buttons [20, 21]

During playback, press

4 to go back to a previous chapter/track and

¢ to advance to the next chapter/track .

+ STEP/SLOW +/– buttons [23]

Press STEP/SLOW + or – during playback to view still frame.

Press and hold STEP/SLOW + or – during playback to view slow playback. In still frame, press STEP/SLOW + to advance DVDs and Video CDs frame by frame and STEP/SLOW – to back up a few frames at a time (DVD only).

¡ FUNCTION M button [54]

You can store in memory up to 5 settings. Press FUNCTION M to memorize and recall the settings.

CLEAR button [25-30, 33-35, 49]

Works in conjunction with a number of player functions. Use to cancel repeat and random playback, and to edit programs.

£ SEARCH button [24]

Press to perform a title/folder, chapter/track or elapsed time search.

¢ PROGRAM button [25, 28-31]

You can program titles, chapters, or tracks to play back in a desired order. Programs can be a maximum of 24 steps.

Additionally, DVD programs for up to 24 discs can be stored in the player’s memory for future use.

A-B button [26]

Press at the beginning and end of the section you want to repeat or to mark a location you want to return to.

§ DVD/TV switch (USA and Canadian models only) [55]

(Buttons indicated with * are used for menu operation.)

SN 29343149 DV-L5E

Connecting to a TV

Before connecting

• Refer also to the instruction manual of the TV.

• When you connect the DVD Player to the TV, be sure to turn off the power and unplug both units from the mains before making any connections.

• Connect the DVD Player to the TV directly. If you connect the DVD

Player to a VCR, TV/VCR combination, or video selector, the playback picture may be distorted as DVD videos are copy protected.

• Connect the plugs securely.

Incomplete

Insert completely

Making component video connections

If the TV or monitor has component video inputs, making this type of video connection will produce the ideal picture quality for the presentation of DVD-Video. Using a componect video cable

(sold separately), connect the VIDEO OUTPUT COMPONENT jacks to the corresponding component video input jacks on the

TV.

Actual labels for component video inputs may vary depending on the TV manufacturer. (e.g. Y, R-Y, B-Y or Y, C

B

, C

R

)

In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance.

Be sure to set the TV Aspect after connection using the Setup Navigator explained in “Setting Up the

Player” starting on page 16 or the function setting menu explained in “Adjusting Audio and Video

Settings” starting on page 38.

Component video cable

To component video inputs

TV

: Signal flow

Active subwoofer

(for powerful bass sound)

VIDEO OUTPUT

Y

P

B

VIDEO

P

R

S VIDEO COMPONENT

MONO

L

R

ANALOG

OUTPUT

DIGITAL

OUTPUT

OPTICAL COAXIAL

REMOTE

CONTROL

Stereo audio connection cable

To audio input

L (White)

R (Red)

Connecting to a TV Using the Audio/Video

Connection Cable

If the TV or monitor has an S video input, make the S video connection. The S video connection will provide higher quality picture playback.

Notes

• If you make the S video connection, leave the yellow plug disconnected.

• If the TV audio is monaural, leave the red plug disconnected.

Stereo audio/video connection cable

To audio/video inputs

R (Red)

L (White)

Video

(Yellow)

S video connection cable

To S video input

TV

DO NOT connect the mains lead at this time.

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

SN 29343149 DV-L5E

13

Connecting to an Amplifier

(To Enjoy the Sound Advantage of the DVD Player)

Although you can reproduce the DVD Player’s sound from the TV speakers with the connections on the opposite page, connecting with an amplifier provides you high quality dynamic sounds.

To reproduce Dolby Digital surround, MPEG1 audio, MPEG2 audio, and DTS surround sound, you need to connect to an amplifier with a Dolby Digital, MPEG1 audio, MPEG2 audio, and DTS decoder respectively.

Before connecting

• Refer to the instruction manual of the amplifier.

• When you connect the DVD Player to the amplifier, be sure to turn off the power and unplug both units from the mains before making any connections. Otherwise, the speakers may be damaged.

• Connect the plugs securely.

Incomplete

Notes

• The remote controller supplied with Onkyo amplifier can be used to operate the DVD player.

• The function of the upper and lower z connectors are the same.

Connect to either one.

Insert completely

Making a digital connection with

the amplifier

If your ampolifier has a digital input jack, be sure to connect it to either DIGITAL OUTPUT

OPTICAL or COAXIAL jack on the DVD player.

Note

DO NOT connect to the AC-3RF input (e.g. of a

Dolby Digital receiver) which is reserved only for video disc players.

Be sure to set the digital output setting after connection using the Setup Navigator explained in “Setting Up the

Player” starting on page 16 or the function setting menu explained in “Adjusting Audio and Video Settings” starting on page 38.

Optical fiber connection cable

To Digital optical jack

Coaxialconnection cable

To Digital coaxial jack z

cable

To zconnector

An amplifier with a Dolby

Digital/DTS/MPEG1/MPEG2 decoder or 2 channel digital stereo

: Signal flow

VIDEO OUTPUT

Y

P

B

VIDEO

P

R

S VIDEO COMPONENT

Making the analog connection

with the amplifier

If your amplifier has no digital audio input, you can make the analog connection. If the amplifier has a Dolby Pro Logic decoder, you can reproduce the Dolby Pro Logic surround sound.

MONO

L

R

ANALOG

OUTPUT

DIGITAL

OUTPUT

OPTICAL COAXIAL

REMOTE

CONTROL

z

cable

To zconnector

Stereo audio connection cable

To audio input

L (White)

R (Red)

An amplifier with no digital connection

DO NOT connect the mains lead at this time.

SN 29343149 DV-L5E

Connecting the Power/

Turning on the DVD Player

Before connecting

• The DV-L5 is shipped with the main power (POWER) switch in the on position (

_ ON). When the power cord is plugged in for the first time, the DV-L5 will automatically enter the standby state (same condition after step 2 below).

• Make sure that all the connections on pages 13 and 14 are complete (the connection to a TV is required).

POWER

STANDBY/ON

ON indicator

STANDBY indicator

1

2

3

Connect the power cord to a wall outlet.

Press POWER to switch on the main power.

The DVD Player enters standby mode.

The STANDBY indicator lights up.

• The buttons on the remote controller do not operate if the POWER switch is set to OFF.

• To switch off the main power, press

POWER again.

Press STANDBY/ON on the DVD

Player or ON on the remote controller.

The DVD Player turns on.

The STANDBY indicator turns off and the

ON indicator lights up.

• To put the DVD Player in the standby mode, press STANDBY/ON on the DVD

Player, or STANDBY on the remote controller. Be sure to set the volume to minimum before putting the DVD Player in the standby mode for the next use to avoid sudden loud sound reproduction.

• While in the STANDBY mode, the DVD

Player can receive signals from the remote controller. However, if you press

POWER on the DVD Player to switch off the main power, the remote controller cannot be used to turn on the DVD

Player.

• Setting the STANDBY button to standby does not shut off the power completely.

Setting the TV System (except for USA and

Canadian models)

The default setting of this player is AUTO, and unless you notice that the picture is distorted when playing some discs, you should leave it set to AUTO.

If you experience picture distortion with some discs, set the TV system to match your country or region’s system. Doing this, however, may restrict the kinds of disc you can watch. The table below shows what kinds of disc are compatible with each setting

(AUTO, PAL and NTSC).

Disc

Type

DVD

Video CD

CD, No disc

Format

NTSC

PAL

NTSC

PAL

Output format

Position of TV SYSTEM mode

NTSC

NTSC

PAL

MOD. PAL

AUTO

NTSC

NTSC

NTSC

NTSC

PAL

MOD. PAL

PAL

PAL

PAL

NTSC

PAL

NTSC or PAL

1 Switch the player into standby.

2 Hold down

¢ then press STANDBY/ON until the display indicates the new setting to switch the TV system.

The TV system changes as follows:

AUTO

=

NTSC

=

PAL

=

NTSC

PAL

AUTO

Note that you have to switch the player into standby before each change.

About MOD. (Modulation) PAL

• SHRINK

Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch vertical amplitude, resulting in a display without vertical shrinkage.

• If your PAL TV does not have a V-Hold control, you may not be able to view NTSC disc because the picture may roll. If the TV has a V-Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically, leaving black bands at the top and bottom of the screen. This is not a malfunction; it is caused by the NTSC

= PAL conversion.

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

SN 29343149 DV-L5E

15

Setting Up the Player

The Setup Navigator has been designed to simplify the process of getting the DVD player ready to perform.

Designed as a series of on-screen multiple-choice questions, the Setup Navigator automatically sets the audio, video, and language settings according to how the questions are answered. Once this procedure is complete, it will be possible to begin using the DVD player to enjoy DVDs.

The procedure on this page describes the operations necessary to function within the Setup Navigator screens. A detailed description of the contents of each question that appears on the screen can be found on the following pages.

Using the Setup Navigator

1

ON

2

SETUP

Press ON (STANDBY/ON on the front panel).

If there’s already a disc loaded and it starts to play, press

7 to stop it.

Press SETUP.

When SETUP is pressed for the first time, the following screen appears. Though the

Setup Navigator may be used more than once, this screen only appears the first time SETUP is pressed.

Audio Video1 V2 Language

Setup Navigator

General

Setup Navigator Start

Auto Start Off

Setup using the Setup Navigator

Move ENTER Select SETUP

Exit

3

Use the cursor buttons (

5/) to

make a selection.

• If you are going to use the Setup

Navigator, it is not necessary to change the setting on the first screen. Please proceed to the next step.

• If you do not want to set up the player using the Setup Navigator, use the cursor button (

∞) to select [Auto Start

Off] at this time.

The Setup Navigator function may still be used at a later time in manual Setup screen menu operation (page 38).

4

ENTER

Press ENTER.

The selection is entered and the next

Setup Navigator screen appears.

Use steps 3 and 4 as a basis for entering selections on the all of the Setup Navigator screens described on the following pages.

When setting up for the first time

Some DVDs start playing automatically when loaded in the player. Because the Setup Navigator cannot be used if a disc is playing, it is recommended to set up the player using the

Setup Navigator before loading a DVD for the first time. If a

DVD has been loaded, be sure to press

7 before proceeding.

To change the answer to a prior question

Use the cursor button (

2) to return to previous screens.

Please note, however, that you cannot go forward using the cursor button (

3), so it will be necessary to answer all the questions that occur after the screen that was returned to.

To exit the Setup Navigator

Press SETUP while on any of the screens to exit the Setup

Navigator. Please note that if the Setup Navigator is exited before all the questions are answered, no settings are changed.

Note

On-screen information (

i

) appears to clarify the functions and explain the options available.

SN 29343149 DV-L5E

ON

5/

7

ON

TV

ON / STANDBY

STANDBY

ANGLE AUDIO

OPEN / CLOSE

SUBTITLE

LAST M COND. M DIMMER DISPLAY

TOP MENU MENU

CH -

RETURN

TV/ VCR

PAUSE STOP

VOL +

ENTER

VOL -

FR FF

CH +

SETUP

PLAY

DOWN UP

1 2 3

STEP/ SLOW

+

4

7

5

8

+10 0

RANDOM REPEAT

6

-

FUNCTION M

9

SEARCH CLEAR

A-B PROGRAM

ENTER

SETUP

DVD TV

Setting the OSD Language

(On-Screen Display Language)

The [OSD Language] screen establishes the OSD language, or on-screen display language, which refers to the language that is used by the player in menus and on-screen messages. Additionally, the language that is established at this setting will also be used for the default audio and subtitle language.

Audio Video1 V2 Language

General

Setup Navigator

Language

OSD Language

English français

Deutsch

Italiano

Español

Select the On Screen Language

Move

ENTER

Select

SETUP

Exit

Settings: English (Factory setting)

français

Deutsch

Italiano

Español

Asian models only

English (Factory setting)

Notes

• The languages that can be selected may be different from those shown above.

• In addition to setting the [OSD Language], the audio and subtitle language are also set at this time. If you wish to change the audio or subtitle language to a different language, make changes in the Setup screen Language menu [Audio Language] and

[Subtitle Language] as needed (pages 47, 48).

Setting the TV screen size

The [TV Type] screen establishes the size, or more appropriately the width to height ration of your television or monitor. The width-to-height ratio of conventional TVs is 4:3, while the width-to-height ratio of wide screen and highdefinition TVs is 16:9. This width-to-height ratio is called the aspect ratio.

Audio Video1 V2 Language

Setup Navigator

General

TV Connection

TV Type Widescreen(16:9)

Standard(4:3)

Widescreen TV

16:9 aspect raito

Move ENTER Select

SETUP

Exit

Settings: Widescreen (16:9) (Factory setting)

Standard (4:3)

Note

There are two screen formats that can be used to display wide-screen format DVDs: letter box and pan & scan. When

[Standard (4:3)] is selected in the Setup Navigator, the letter box screen format is automatically selected. To switch the preference to the pan & scan format, make changes in the Setup screen Video 1 menu [TV Screen] setting (page 42).

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

SN 29343149 DV-L5E

17

Setting Up the Player

Using the Setup Navigator

Setting digital audio connections to an AV

amplifier or decoder

The [Digital Jack] screen establishes whether digital connections have been made to an AV amplifier, receiver, or external decoder. As there are numerous options available, please refer to the instructions supplied with the component the player is connected to determine what digital audio formats can be decoded. If you have made no digital connections, select [Not Connected].

Audio Video1 V2 Language

General

Setup Navigator Dolby Digital

Amp Connection

Digital Jack

Dolby Digital/DTS

Dolby Digital/MPEG

Dolby D/DTS/MPEG

PCM

Not Connected

Compatible with Dolby Digital

Move ENTER Select SETUP Exit

Settings: Dolby Digital (Factory setting)

Dolby Digital/DTS

Dolby Digital/MPEG

Dolby D/DTS/MPEG

PCM

Not Connected

Warning

• Do not set [Digital Jack] to [Dolby Digital/DTS] or [Dolby D/DTS/

MPEG] if the amplifier does not have a DTS decoder. If you do so, high volume sound may be output and damage your hearing as well as speakers.

• Select [PCM] when you connect the player to a 2 channel digital stereo amplifier. If you select other than [PCM], high volume sound may be output and damage your hearing as well as speakers.

Setting compatibility with 96 kHz output

The [96 kHz PCM Audio] screen establishes whether or not the AV component the player is connected to is capable of processing an audio signal with a sampling rate of 96 kHz.

This screen only appears if connections have been made to an external AV component as determined in previous screens.

Audio Video1 V2 Language

Setup Navigator

General

Amp Connection

96kHz PCM Audio

No

Yes

Don't Know

Digital jack not compatible with 96kHz

Move ENTER Select SETUP

Exit

Settings: No (Factory setting)

Select if the connected AV component cannot process an audio signal with a sampling rate of 96 kHz.

Yes

Select if the connected AV component can process an audio signal with a sampling rate of 96 kHz.

Don’t Know

Select if you are uncertain whether the connected

AV component can process an audio signal with a sampling rate of 96 kHz.

Confirming the settings

The [Exit Setup Navigator] is the final screen in the Setup

Navigator.

Audio Video1 V2 Language

Setup Navigator

General

Exit Setup Navigator

Save Changes

Delete Changes

Start Again

Changes are saved

Move ENTER Select SETUP

Exit

Settings: Save Changes (Factory setting)

Select to have the player make all of the necessary audio, video and language settings according to your responses in the Setup Navigator.

Delete Changes

Select to exit the Setup Navigator without changing any of the system settings.

Start Again

Select to return to the [OSD Language] screen of the Setup Navigator and do the settings again.

To change other player settings in the Setup

screen menus

The procedure for changing the settings in the Setup screen menus is described on page 38.

SN 29343149 DV-L5E

Getting Started Using Your

DVD Player

2/3/5/

Before you can start to enjoy the digital audio and video on DVDs, be sure that you have either performed the Setup Navigator procedure described in the previous section or made the necessary settings in the Setup screen menus as outlined in the next section to set up the player to correspond to your home system. Having made these settings, you are now ready to start using the player to enjoy DVDs, Video CDs, CDs and MP3s.

DVD

VCD CD MP3

Playing DVDs, Video CDs, CDs and MP3s

Warning

If the DVD Player is connected to the

TV or amplifier through the analog audio jacks, do not play DTS-encoded discs. Excessive noise may be output from the analog stereo jacks, which may damage the connected equipment.

To reproduce DTS surround sounds, digital connection to an amplifier with a DTS decoder is needed.

Number buttons

ON

1

ON

Press ON (STANDBY/ON on the front panel).

5

2

OPEN / CLOSE

Press

0.

The disc tray comes out.

ENTER

ON

STANDBY

TV

ON / STANDBY

ANGLE

OPEN / CLOSE

AUDIO SUBTITLE

LAST M COND. M DIMMER DISPLAY

TOP MENU MENU

CH -

RETURN

TV/ VCR

PAUSE STOP

VOL +

ENTER

VOL -

FR FF

CH +

SETUP

PLAY

DOWN UP

1 2 3

STEP/ SLOW

+

4 5 6

-

FUNCTION M

7 8 9

+10

0

RANDOM REPEAT

SEARCH CLEAR

A-B PROGRAM

REMOTE CONTROLLER RC449 DV

DVD TV

Select the item you want to view.

• When a DVD is loaded:

Select the item with the cursor buttons

(

2/3/5/∞) or the number buttons then press ENTER.

• When a Video CD is loaded:

Use the number buttons to select the item.

0

ENTER

£

3

Load a disc.

Load a disc with the label side facing up, using the disc tray guide to align the disc.

1

4

7

+10

2

5

8

0

3

6

9

4

PLAY

About the

Press

£.

• The disc tray closes, and playback begins.

• MP3 only: It may take a few seconds for the player to locate the track on the disc, depending on the complexity of the file structure. During this time,

“Please wait a moment” is displayed.

• Depending on the disc, a menu may be displayed. If a menu is displayed, proceed to step 5.

DVD

,

VCD

,

CD

and

MP3

marks in the pages related to disc operation

DVD

means the function or title is related to DVD-Video operation.

VCD

means the function or title is related to Video CD operation.

CD

means the function or title is related to audio CD operation.

MP3

means the function or title is related to MP3 operation.

Notes

• Noise is output if you make digital audio connections to a receiver or amplifier that does not have a built-in decoder. Check that the digital audio output format selected in the

Audio menu corresponds to the audio components you have made connections to (pages 18, 40, 41).

• The TV screen size is factory set to present the wide screen format (16:9 aspect ratio). If you have a standard TV screen (4:3 aspect ratio), this setting can be changed to match your TV screen size in the Video 1 menu (pages 17, 42).

• Do not move the DVD Player during playback. Doing so may damage the disc.

• Use

0 on the remote controller or DVD Player to open and close the disc tray. Do not touch the disc tray while it is moving. Doing so may cause the DVD Player to malfunction.

• Do not press down on the disc tray or put any objects other than playable discs on the disc tray. Doing so may cause the DVD

Player to malfunction.

• In many instances, a menu screen appears when playback of a movie is complete. Prolonged display of an on-screen menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press

7 once the movie is complete.

When an operation is prohibited

There are times when you are using the player and attempt to perform an operation, but for some reason it cannot be performed. When this occurs, one of the two following icons appears on the screen.

The operation is prohibited by the player.

The operation is prohibited by the programming on the disc.

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

19

SN 29343149 DV-L5E

Getting Started Using Your DVD Player

DVD

VCD

When a Menu Screen is Displayed

Menu screens are displayed for DVDs that have menu screens or Video CDs that include Playback Control (PBC).

DVDs often contain extra information that can be accessed in the DVD menu and sometimes makes navigating DVD menu screens as enjoyable as watching the feature presentation.

Example: When a DVD that has menu screens is loaded

1 Highlight Clips

2 Chapter List

3 Commercial Header

4 Subtitles

5 Soundtrack

6 Start Main Feature

Example: When a Video CD that has Playback Control is loaded

1

2

3

4

7

8

5

6

STANDARD VOCAL BEST

Don't Tekno for an Answer

Bad Whack Naff Riff dubmyheadbassman

Gooey Love Jingle

Praise the Day

G3, Ba-san

Abstract Jazz Phunk

Rock the Love Jive

Bertie B.& the Goans

Hood in the Boyz

Sleek Machine

Philip William

Formerly an Artist

Pfeuti

John Torn

Hot Monkey Stick

To navigate a menu screen

• Although individual DVD titles may differ, when a menu screen is displayed, use the cursor buttons (

2/3/5/∞) and

ENTER on the remote control. The cursor buttons are used to move around the options on the screen and ENTER is used for selection.

• Occasionally, the number buttons may also be used to make selections. If this is possible, using number buttons serves to directly select an option on a menu screen. Only number buttons are used to make selections on Video CD menu screens.

• When the Video CD has more than one menu, pages can be advanced to or returned to with

4 or ¢.

DVD

VCD

To Open or Return To the DVD or Video

CD Menu Screen

Although this differs depending on the disc, pressing MENU,

TOP MENU, or RETURN during DVD playback or RETURN during Video CD playback displays the menu screen. Refer to the DVD or Video CD disc jacket and accompanying documentation for more information.

To play Video CDs without displaying menu

screens

Video CDs with Playback Control (PBC) display a menu screen when play is started. It is possible, however, to play back Video CDs without displaying menu screens.

When a Video CD with PBC is loaded, press

7, and then the number button of the track you want to play.

SN 29343149 DV-L5E

DVD

VCD CD MP3

Chapter (Track) Skip Forward/Skip

Back

UP

DOWN

Advancing to the next chapter (track)

Press

¢.

Press to skip forward to the next chapter

(track).

Skipping back to the previous chapter

(track)

Press

4.

• Press once to skip back to the start of the chapter (track) currently playing.

• Press twice to skip back to the start of the previous chapter (track).

TOP MENU

2/3/5/

RETURN

1/¡

ON

TV

ON / STANDBY

STANDBY

ANGLE

OPEN / CLOSE

AUDIO SUBTITLE

LAST M COND. M DIMMER DISPLAY

TOP MENU MENU

CH -

RETURN

TV/ VCR

PAUSE STOP

VOL +

ENTER

VOL -

FR FF

CH +

SETUP

PLAY

DOWN UP

1 2 3

STEP/ SLOW

+

4 5 6

-

FUNCTION M

7 8 9

+10

0

RANDOM REPEAT

SEARCH CLEAR

A-B PROGRAM

REMOTE CONTROLLER RC449 DV

DVD TV

MENU

ENTER

4/¢

DVD

VCD CD MP3

Forward and Reverse Scanning

FR

FF

Fast forward and reverse scanning

Press and hold

¡ or 1 (¢ or

4 on the front panel) during

playback to scan forwards or backwards.

While “

¡1” or “1 1” is displayed onscreen blinking, release the button to resume normal playback.

Variable speed scanning

1 Press (but don’t hold)

¡ or 1

during playback to start scanning.

¡ 1” or “1 1” appears on screen.

2 Depending on the type of disc playing, you can increase the scanning speed by pressing

¡

or

1.

The scan speed is shown on-screen.

DVD discs have three scanning speeds;

1, 2 and 3.

CD and Video CDs have two scanning speeds;

1 and 2.

MP3 have only one scanning speed.

3 Press

£ to resume normal

playback.

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

SN 29343149 DV-L5E

21

Getting Started Using Your DVD Player

DVD

VCD

Resuming playback from where you stopped

Use the resume feature to restart playback from the point that the disc was stopped last time.

This features cannot be used with MP3s and CDs.

1

STOP

2

PLAY

Press

7 once.

The display shows “RESUME” and the stop position is memorized.

• The resume position remains memorized as long as the disc is in the player — even if you switch the power off.

• Pressing

7 twice causes the disc to return to the beginning when

£ is pressed again. The display shows the disc type (DVDs or Video CDs).

Press

£.

Playback starts from the resume position.

ON

7

ON

TV

ON / STANDBY

STANDBY

ANGLE AUDIO

OPEN / CLOSE

SUBTITLE

LAST M COND. M DIMMER DISPLAY

TOP MENU MENU

CH -

RETURN

TV/ VCR

PAUSE STOP

VOL +

ENTER

VOL -

FR FF

CH +

SETUP

PLAY

DOWN UP

1 2 3

STEP/ SLOW

+

4

7

5

8

+10 0

RANDOM REPEAT

6

-

FUNCTION M

9

SEARCH CLEAR

A-B PROGRAM

REMOTE CONTROLLER RC449 DV

DVD TV

0

£

DVD

VCD CD MP3

Stopping Playback and Switching

Power Off

1

STOP

Press

7.

Playback stops.

2

OPEN / CLOSE

Press

0.

The disc tray comes out.

3

Remove the disc.

4

STANDBY

Press STANDBY (STANDBY/ON on the front panel ).

The disc tray goes back in.

Notes

• The actual restart position may be slightly before or after the resume position.

• If you want to remove the disc, but still want to resume playback from the last stopped position, use the LAST MEMORY feature instead (page 34).

• The memorized resume position is erased when you open the disc tray, or change the Parental Lock Level setting (page 51) or

On-screen Display (OSD) setting (page 47).

SN 29343149 DV-L5E

Still Frame/Slow Play

The video images on DVD and Video CD can be viewed as a still frame, played back at slow speeds and even advanced frame by frame.

8

ON

TV

ON / STANDBY

STANDBY

ANGLE AUDIO

OPEN / CLOSE

SUBTITLE

LAST M COND. M DIMMER DISPLAY

TOP MENU MENU

CH -

RETURN

TV/ VCR

PAUSE STOP

VOL +

ENTER

VOL -

FR FF

CH +

SETUP

PLAY

DOWN UP

1 2 3

STEP/ SLOW

+

4

7

5

8

+10 0

RANDOM REPEAT

6

-

FUNCTION M

9

SEARCH CLEAR

A-B PROGRAM

REMOTE CONTROLLER RC449 DV

DVD TV

£

STEP/SLOW +/–

DVD

VCD

Viewing a still frame

PAUSE

STEP/ SLOW

+

-

Press

8, STEP/SLOW +/–.

When viewing a DVD, if the paused picture shakes, select the [Field] setting in the

Setup screen Video 1 menu [Still Picture] setting as described in the section on page

30.

Frame by frame advance playback: Viewing

one frame at a time

You can’t use frame review with Video CDs.

1 Press

8, STEP/SLOW +/–.

2 Press STEP/SLOW +/–.

STEP/SLOW +: The picture advances one frame each time the button is pressed.

STEP/SLOW –: The picture backs up a DVD a few frames each time the button is pressed.

To return to normal playback

When viewing a still frame playback, pressing

8 or £ restores normal playback operation.

Notes

• There is no sound when viewing still frames or slow playback, or when advancing one frame at a time.

• Still frame, slow play, or frame advance playback may not be possible with certain titles. In this case, the mark is displayed.

DVD

VCD

Viewing slow playback

You can’t use slow reverse play with Video CDs.

1

STEP/ SLOW

+

-

2

STEP/ SLOW

+

-

During still frame playback, press and hold STEP/SLOW +/– during playback.

Press STEP/SLOW +/– repeatedly to change the slow-motion speed.

There are four forward slow-motion play speeds:

3 1/16 3 1/8

1/2

2

1/4

2

There are two reverse slow-motion play speeds:

Slow 1

↔ Slow 2

To return to normal playback

When viewing a slow playback, pressing

£ restores normal playback operation.

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

SN 29343149 DV-L5E

23

Locating a Specific Title/Folder/Chapter/

Track/Location

2

1

4

7

+10

DVD

VCD CD MP3

Searching for a Title, Folder, Chapter, Track, or Location on a Disc

This player offers different ways of accessing the information on a DVD, Video CD, CD or MP3. Using SEARCH, you can search for titles or chapters on a DVD, tracks on a Video CD,

CD or folders or tracks on a MP3 and even select the point in time to start playback.

1

SEARCH

Press SEARCH repeatedly to select the type of search.

The type of search changes which each press as follows.

DVD

3 Title 3 Chapter

Off

2 Time 2

Video CD

3 Track 3 Time

Off

2

CD

3 Track 3 Off

MP3

Notes

• For some discs, selection can be made using the top menu on the DVD. In this case, press TOP MENU to display the menu screen and then make your selection.

• With some DVDs, the search operation may not be possible and may stop shortly after being performed. In this case, the mark is displayed.

• Time search is not possible with CDs and MP3s.

• When performing DVD or Video CD time search, playback may start from a slightly different time than that specified.

• Time search is not possible during when the disc is stopped.

• Search using time search is not possible during PBC playback of

Video CDs.

To perform a direct title or chapter/track

search using the number buttons

• Press the number buttons while the disc is stopped to select a title or track number.

• Press the number buttons while the disc is playing to select a chapter or track number.

• To select number 3, press 3.

• To select number 10, press +10 and 0.

• To select number 37, press +10, +10, +10 and 7.

3 Folder 3 Track

Off

2

2

5

8

0

3

6

9

Press the number button(s) of the desired title, chapter or track or of the specific time where you would like to begin playback.

• To select number 3, press 3.

• To select number 10, press 1 and 0.

• To select number 87, press 8 and 7.

When performing a time search:

• To select 21 minutes, 43 seconds, press 2, 1, 4, and 3.

• To select 1 hour, 14 minutes, press 7, 4,

0, and 0.

3

PLAY

Press

£.

Playback of the selected title, folder, chapter or track starts. When a time search is performed, playback begins at the appointed time.

SN 29343149 DV-L5E

TOP MENU

2/3/5/

Number buttons

ON

TV

ON / STANDBY

STANDBY

ANGLE AUDIO

OPEN / CLOSE

SUBTITLE

LAST M COND. M DIMMER DISPLAY

TOP MENU MENU

CH -

VOL +

ENTER

VOL -

CH +

RETURN

TV/ VCR

PAUSE STOP

FR FF

SETUP

PLAY

DOWN UP

1 2 3

STEP/ SLOW

+

4 5 6

-

FUNCTION M

7 8 9

+10

0

RANDOM REPEAT

SEARCH CLEAR

A-B PROGRAM

REMOTE CONTROLLER RC449 DV

DVD TV

MENU

£

CLEAR

SEARCH

PROGRAM

MP3

Using the MP3 Navigator

Use the MP3 Navigator to make searching for the track(s) you want to play easier. You can also use it to add or clear tracks from the program list.

1

2

MENU

Load a CD-ROM containing MP3 tracks.

Press MENU to enter the MP3

Navigator screen.

The left side of the screen shows a list of folders containing MP3 tracks.

Total number of Track

Folder

1.FOLDER_1

2.FOLDER_2

3.FOLDER_3

4.FOLDER_4

5.FOLDER_5

ENTER

Play

MP3 Navigator

Track

1.T_001

2.T_002

3.T_003

4.T_004

5.T_005

MENU Exit

Total number of Folder

If you display the MP3 Navigator when a disc is playing, the currently playing folder and track numbers are shown at the top left of the screen.

On the right side is a list of MP3 tracks from the first title in the list.

Current :

3 1-1

1~10 Folder

1.FOLDER~1

2.FOLDER~2

3.FOLDER~3

4.FOLDER~4

5.FOLDER~5

6.FOLDER~6

CREAR

Clear

ENTER

Play

MP3 Navigator

Track

1.TRACK1~1

2.TRACK2~2

3.TRACK3~3

4.TRACK4~4

1~4

SETUP

Exit

Navigate using the following controls:

Cursor buttons (

2/3)

Select folder and tracks from the current screen.

Cursor buttons (

5/∞)

Select the previous/next of folders and tracks. To move rapidly up or down a long list of folders or tracks, press and hold the Cursor buttons

(

5/∞).

ENTER Play the currently selected folder or track. MP3 tracks that are unplayable on this system are automatically skipped and the display shows

“UNPLAYABLE MP3 FORMAT”.

MENU

PROGRAM

Exit the MP3 Navigator

Add the currently selected track to the program list. (Tracks in the program list are marked .)

Pressing PROGRAM repeatedly will add the track to the program list repeatedly.

CLEAR

See ‘Programming MP3s’ on page 29 for how to use program play.

Clear the currently selected track from the program list.

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

SN 29343149 DV-L5E

25

Repeat Play

You can repeat an entire title, folder, chapter or track, or just a part.

REPEAT

ON

STANDBY

TV

ON / STANDBY

ANGLE

OPEN / CLOSE

AUDIO SUBTITLE

LAST M COND. M DIMMER DISPLAY

TOP MENU MENU

CH -

RETURN

TV/ VCR

PAUSE STOP

VOL +

ENTER

VOL -

FR FF

CH +

SETUP

PLAY

DOWN UP

1 2 3

STEP/ SLOW

+

4 5 6

-

FUNCTION M

7 8 9

+10

0

RANDOM REPEAT

SEARCH CLEAR

A-B PROGRAM

REMOTE CONTROLLER RC449 DV

DVD TV

£

CLEAR

A-B

DVD

VCD CD MP3

Repeating a Title, Folder, Chapter or

Track

REPEAT

Repeat play of a chapter/track

Press REPEAT once during playback of the chapter or track you want to repeat.

Repeat play of a title/folder

Press REPEAT twice during playback of the title you want to repeat.

Repeat play of a disc

VCD CD

Press REPEAT twice during playback of the disc you want to repeat.

MP3

Press REPEAT three times during playback of the disc you want to repeat.

To repeat a program

Press REPEAT once during program playback to repeat the program.

To cancel repeat play

Press CLEAR. Playback continues, but the repeat function is canceled.

DVD

VCD CD

Repeating a Specific Segment

A-B

Repeat play of a specified section

Press A–B at the beginning and end of the section you want to repeat.

• When A–B is pressed a second time, the disc returns to the location where A–

B was pressed first and plays the selected section repeatedly.

• You can only perform A–B repeat within the same title, chapter, or track.

Return to a specified location on a disc

1 Press A–B at the desired location.

2 When you want to return to the specified location, press

£.

To cancel A–B repeat play

Press CLEAR. Playback continues, but the repeat function is canceled.

To clear the specified location

Press CLEAR to cancel repeat play or to clear the specified location that was set using A–B.

Notes

• With some DVD discs, there may be times when repeat playback is not possible. In these cases, the mark will appear on the screen.

• With Video CDs, repeat play is not possible when the menu is displayed (PBC playback). To perform repeat play, start playback without displaying a menu by pressing the track number to be repeated when the disc is stopped, and then press REPEAT.

• You cannot use A-B repeat when listening to an MP3.

• If you switch camera angle during repeat play, repeat play is cancelled

SN 29343149 DV-L5E

Random Play

Play titles, chapters, or tracks on a disc in random order.

REPEAT

ON

TV

ON / STANDBY

STANDBY

ANGLE AUDIO

OPEN / CLOSE

SUBTITLE

LAST M COND. M DIMMER DISPLAY

TOP MENU MENU

CH -

VOL +

ENTER

VOL -

CH +

RETURN

TV/ VCR

PAUSE STOP

FR FF

SETUP

PLAY

DOWN UP

1 2 3

STEP/ SLOW

+

4

7

5

8

+10 0

RANDOM REPEAT

6

-

FUNCTION M

9

SEARCH CLEAR

A-B PROGRAM

REMOTE CONTROLLER RC449 DV

DVD TV

ENTER

£

4/¢

CLEAR

DVD

VCD CD MP3

Playing in Random Order

RANDOM

ENTER

PLAY

Random playback of chapters within one title

Press RANDOM once, then press

ENTER or

£.

“Random Chapter” appears on the screen, and chapters within the title will be played back in random order.

Random playback of titles

Press RANDOM twice, then press

ENTER or

£.

“Random Title” appears on the screen, and titles will be played back in random order.

Random playback of tracks

Press RANDOM.

“Random” appears on the screen, and random playback begins.

To change titles, chapters, or tracks during

random play

• Press

¢ or RANDOM and the next randomly selected title, chapter, or track starts playing.

• Press

4 and playback of the current title, chapter, or track starts again from the beginning.

To stop random play

Press CLEAR. This returns you to normal playback of chapters/tracks in order from the chapter/track currently playing.

Notes

• With Video CDs, random play is not possible during playback when the menu is displayed (PBC playback). To perform random play, start playback without displaying a menu by pressing a track number button while in the stop mode, and then press RANDOM.

• Random play of programmed chapters/tracks is not possible.

• In the case of DVDs, random playback may not be possible with some discs.

• Repeat playback of random playback is not possible. In these cases, the mark will appear on the screen.

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

SN 29343149 DV-L5E

27

Playing in a Favourite Order

The titles and chapters within a title on a DVD and similarly MP3, CD and Video CD tracks can be arranged to play in the order you want.

With this player, it is possible to make a program as you watch a DVD or Video CD or while listening to an MP3 or a CD .

DVD

Programming DVDs

A program with a maximum of 24 steps can be memorized.

1

PROGRAM

Press PROGRAM.

The Program screen appears.

Program Chapter Program Title

Current:

Title 2(/20)

Program Chapter Program Title

Current:

Title

Title

1

7

Chapter

1

(Chapter 1~18)

2

3

4

4

1

5

7

+10

ENTER

PLAY

2

5

8

0

3

6

9

Program Memory Off

Move ENTER Play PROGRAM Exit

Program Memory Off

Move

ENTER

Play

PROGRAM Exit

Use the cursor buttons (

2/3) to

select either [Program Chapter] or

[Program Title].

Once the program type is selected.

Use the cursor button (

) to enter

the program window.

When [Program Chapter] is selected, you must also select what title the chapters to be programmed are in. Use the cursor button (

5) to highlight “Title” and then use the number buttons to enter the title number to be used.

In the program window, use the number buttons to enter the numbers of the titles or chapters in the order you want to program them in.

• To program DVD titles/chapters 9, 7, and 18 in order, press 9, 7, +10 and 8.

Program Chapter Program Title

Current: Title 2(/20)

09 07 18

Program Chapter Program Title

Current:

Title

09 07 18

Title

1

7 Chapter 1

(Chapter 1~18)

Program Memory Off

Move ENTER Play PROGRAM Exit

Program Memory Off

Move

ENTER

Play

PROGRAM

Exit

Press ENTER or

£.

• Playback starts in the set order.

• Press PROGRAM to return to the previous display. The program will not begin until

£ is pressed.

To program a pause in a program

Press

8 instead of a number button.

8” appears on the screen and the pause can be programmed.

A pause cannot be programmed as the first or last position in a program, and two or more pauses cannot be programmed in succession.

To delete a number:

Use the cursor buttons (

5/∞/2/3) to highlight the incorrect number and then press CLEAR.

The number is deleted. If the number was before another number, the later numbers are reordered automatically.

To insert a number:

Use the cursor buttons (

5/∞/2/3) to highlight the number to be placed after the new number and then press the number button(s) of the number to be inserted.

The new number is inserted before the previously selected number.

To stop program play

Press

7.

Notes

• When programming chapters, chapters not programmed may appear on the screen. This is not a malfunction.

• Programming may not be possible with certain DVD discs. On these types of discs, the mark will appear on the screen when programming is attempted.

• Only chapters within the same title can be programmed during chapter programming.

SN 29343149 DV-L5E

2/3/5/

8

7

Number buttons

ON

STANDBY

TV

ON / STANDBY

ANGLE AUDIO

OPEN / CLOSE

SUBTITLE

LAST M COND. M DIMMER DISPLAY

TOP MENU MENU

CH -

RETURN

TV/ VCR

PAUSE STOP

VOL +

ENTER

VOL -

FR FF

CH +

SETUP

PLAY

DOWN UP

1 2 3

STEP/ SLOW

+

4

7

5

8

+10 0

RANDOM REPEAT

6

-

FUNCTION M

9

SEARCH CLEAR

A-B PROGRAM

REMOTE CONTROLLER RC449 DV

DVD TV

ENTER

£

CLEAR

PROGRAM

MP3

Programming MP3s

A program with a maximum of 24 steps can be memorized.

1

PROGRAM

Press PROGRAM to enter the [MP3

Program] screen.

If you added tracks to the program list from the ‘Using the MP3 navigator’ on page 25, the tracks are displayed here.

Total number of folder and track

Folder name Track name

MP3 Program

Folder : 001~25 – – – – – – – – : – – – – – – – –

– – –:– – – – – –:– – – – – –:– – – – – –:– – –

– – –:– – – – – –:– – – – – –:– – – – – –:– – –

– – –:– – – – – –:– – – – – –:– – – – – –:– – –

– – –:– – – – – –:– – – – – –:– – – – – –:– – –

– – –:– – – – – –:– – – – – –:– – – – – –:– – –

Move ENTER Play PROGRAM Exit

From this screen you can enter folder and track numbers directly to build up a program list.

2

1

4

7

+10

2

5

8

0

3

6

9

3

1

4

7

+10

2

5

8

0

3

6

9

Use the number buttons to enter a three-digit folder number.

The number of folders on the disc is displayed in the top-left of the screen.

Once you’ve entered a valid folder number, the name of the folder appears.

MP3 Program

Track 001~10 FOLDER~1 : – – – – – – – –

001:– – – – – –:– – – – – –:– – – – – –:– – –

– – –:– – – – – –:– – – – – –:– – – – – –:– – –

– – –:– – – – – –:– – – – – –:– – – – – –:– – –

– – –:– – – – – –:– – – – – –:– – – – – –:– – –

– – –:– – – – – –:– – – – – –:– – – – – –:– – –

Move ENTER Play PROGRAM Exit

Use the number buttons to enter a three-digit track number.

The number of tracks in the current folder is displayed in the top-left of the screen.

Once you’ve entered a valid track number, the name of the track appears.

MP3 Program

Folder 001~25 – – – – – – – – : – – – – – – – –

001:008 – – –:– – – – – –:– – – – – –:– – –

– – –:– – – – – –:– – – – – –:– – – – – –:– – –

– – –:– – – – – –:– – – – – –:– – – – – –:– – –

– – –:– – – – – –:– – – – – –:– – – – – –:– – –

– – –:– – – – – –:– – – – – –:– – – – – –:– – –

Move

ENTER Play PROGRAM

Exit

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

Navigate using the following controls:

Cursor button Navigate the program list.

CLEAR Clear the currently selected item in the program list.

ENTER

PROGRAM

Start playing the program list.

Exit the [MP3 Program] screen.

29

SN 29343149 DV-L5E

Playing in a Favourite Order

VCD CD

Programming Video CDs, CDs

A program with a maximum of 24 steps can be memorized.

1

PROGRAM

Press PROGRAM.

The program screen appears. When a

Video CD or CD is loaded, the cursor appears in the program window.

Program Track

Current:

Total Time

Track 1(/10)

0.00

2

1

4

7

+10

2

5

8

0

3

6

9

3

ENTER

Move

ENTER

Play

PROGRAM

Exit

Use the number buttons to enter the numbers of the tracks in the order you want to program them in.

• To program tracks 9, 7, and 18 in order, press 9, 7, +10 and 8.

• To edit the program, refer to the procedures on the previous page.

Press ENTER or

£.

• Playback starts in the specified track order.

• To stop the program play, press

7.

PLAY

DVD VCD CD MP3

Additional programming options

After you have made a program, it is then possible to confirm, add, or clear the contents of the program.

To confirm the contents of a program:

On a CD or Video CD track program, press PROGRAM to confirm.

The program screen displays the current program.

On a DVD, select the program type (title or chapter) with the cursor buttons (

2/3).

The current DVD title or chapter program can then be confirmed on the appropriate program screen.

To add to a program:

1 Press PROGRAM.

2 Press a number button to add a new title, chapter, or track at the end of the program.

3 Press PROGRAM to exit the program screen.

To delete a program:

1 Press PROGRAM.

2 Select the program with the cursor buttons (

2/3), then press CLEAR.

3 Press PROGRAM to exit the program screen.

Notes

• The complete program will be deleted even if the disc tray is open or power off (standby).

• Pressing CLEAR when the disc is stopped will clear all programs.

Notes

• To program a pause, or to add or delete a number, refer to the procedures for ‘Programming DVDs’ on page 28.

• You cannot program when playing a Video CD using menu selections (during PBC).

SN 29343149 DV-L5E

2/3/5/

Number buttons

ON

TV

ON / STANDBY

STANDBY

ANGLE

OPEN / CLOSE

AUDIO SUBTITLE

LAST M COND. M DIMMER DISPLAY

TOP MENU MENU

CH -

RETURN

TV/ VCR

PAUSE STOP

VOL +

ENTER

VOL -

FR FF

CH +

SETUP

PLAY

DOWN UP

1 2 3

STEP/ SLOW

+

4

7

5

8

+10 0

RANDOM REPEAT

6

-

FUNCTION M

9

SEARCH CLEAR

A-B PROGRAM

REMOTE CONTROLLER RC449 DV

DVD TV

ENTER

£

CLEAR

PROGRAM

To add a title/chapter/track to a program

Press and hold PROGRAM for about 2 seconds.

The current title/chapter/track number appears on-screen together with the program step number. If there isn’t already a program then a new one will be created.

Chapter 07

3 Program 03

To save a program in memory

This player can memorize the programs on up to 24 DVDs. By turning the [Program Memory] to [On], the player will save your program and recall it the next time you use the same DVD. When the program memory exceeds 24, programs will be erased in chronological order from the oldest program in memory.

1 Use the cursor button (

∞) to highlight [Program Memory] and use the cursor button (

£) to select [On].

Program Chapter Program Title

Current:

Title

Title

1

7 Chapter 1

(Chapter 1~18)

To confirm the contents of a program:

Press PROGRAM.

Notes

• When using this function to program DVDs, the program being created corresponds to the Program screen (chapter or title) that appears when PROGRAM is pressed. Be sure to check that the appropriate program type is selected.

• You cannot make a program containing chapters in different titles.

Program Memory On

Off

Move ENTER Select PROGRAM Exit

2 Press ENTER.

The program is saved in memory.

Note

When a DVD with a program stored in memory is loaded, program playback may start automatically.

To erase a program saved in memory

The player erases programs in chronological order when the maximum number of programs that can be held in memory is exceeded. To prevent the player from erasing older programs that you may still use regularly, or when you don’t want to use a program anymore, it is possible to manually erase programs stored in memory.

1 Load a DVD that has a program stored in memory.

2 Press PROGRAM.

The program screen appears.

3 Use the cursor button (

∞) to highlight [Program Memory] and use the cursor buttons (

3/∞) to select [Off].

4 Press ENTER.

The program is cleared from memory.

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

SN 29343149 DV-L5E

31

Selecting the Camera Angle

You can select a camera angle when viewing DVDs with the multi-angle option.

ANGLE

ON

TV

ON / STANDBY

STANDBY

ANGLE

OPEN / CLOSE

AUDIO SUBTITLE

LAST M COND. M DIMMER DISPLAY

TOP MENU MENU

CH -

RETURN

TV/ VCR

PAUSE STOP

VOL +

ENTER

VOL -

FR FF

CH +

SETUP

PLAY

DOWN UP

1 2 3

STEP/ SLOW

+

4

7

5

8

+10 0

RANDOM REPEAT

6

-

FUNCTION M

9

SEARCH CLEAR

A-B PROGRAM

REMOTE CONTROLLER RC449 DV

DVD TV

MENU

DVD

Viewing from a Desired Camera Angle (Multi-Angle)

ANGLE

Press ANGLE during playback.

The camera angle changes each time you press the button.

Angle : 1/4

\

Angle : 2/4

To check whether or not a disc is recorded

with angles

The jacket of discs that are recorded with angles will be marked with

. When locations on discs that are recorded with angles are played back, the indicator can be displayed.

To cancel the angle mark, set [Angle Indicator] to [Off] in the Setup screen Video menu described in the section below (page 46).

Angle : 4/4

»

Angle : 3/4

«

|

Notes

• You can use the Multi-Angle function only with discs featuring recordings of images shot from different camera angles.

• During Multi-Angle playback, the indicator in the display lights.

• For some discs, selection can be made using the DVD menu. In this case, press MENU to display the DVD menu screen and then make your selection.

• If you change the camera angle during still playback, the DVD player resumes normal playback.

SN 29343149 DV-L5E

Selecting the Audio/

Subtitle Language

ON

TV

ON / STANDBY

STANDBY

ANGLE AUDIO

OPEN / CLOSE

SUBTITLE

LAST M COND. M DIMMER DISPLAY

TOP MENU MENU

CH -

VOL +

ENTER

VOL -

CH +

RETURN

TV/ VCR

PAUSE STOP

FR FF

SETUP

PLAY

DOWN UP

1 2 3

STEP/ SLOW

+

4

7

5

8

+10 0

RANDOM REPEAT

6

-

FUNCTION M

9

SEARCH CLEAR

A-B PROGRAM

REMOTE CONTROLLER RC449 DV

DVD TV

SUBTITLE

AUDIO

MENU

CLEAR

DVD

Changing the Audio Language (Multi-

Language Function)

Dolby Digital, PCM, and other audio data can be recorded on

DVDs in a number of languages or audio tracks, letting you choose the desired language or audio.

AUDIO

Press AUDIO repeatedly to select the desired language.

Pressing AUDIO once displays the currently selected language. Subsequent presses rotates through the audio languages available on the DVD.

Audio : 1 English

Dolby Digital

5.1CH

Audio : 2 Spanish

Dolby Digital

5.1CH

HOLA

HELLO

DVD

Selecting a Subtitle Language

You can select a desired subtitle language with DVDs that have subtitle data in multiple languages recorded on them.

SUBTITLE

(Multi-Language Subtitles)Press

SUBTITLE repeatedly during playback.

Pressing SUBTITLE once displays the currently selected subtitle language.

Subsequent presses rotates through the subtitle languages available on the DVD.

Subtitle :1 English Subtitle :2 Spanish

HELLO! HOLA!

Notes

• You cannot switch languages if there is only one language recorded on the disc.

• Switching the audio language may not be possible with some titles. In this case, the mark is displayed.

• For some titles, selection can be made using the DVD menu.

In these cases, press MENU to display the DVD menu screen and then make your selection.

• When you erase the resume position or replace a disc, the DVD player returns to the automatic setting in the setting menu (page 47)

Changing Audio Type

For enjoyment of karaoke or similar format Video CDs, CDs and

MP3s, it is possible to select stereo audio, or either right or left channel mono depending on the requirements of the source.

Press AUDIO repeatedly during playback to switch the audio type.

Audio output changes from [1/L] (Left channel) to

[2/R] (Right channel) to [Stereo].

Audio : 2/R

Audio : 1/L

Notes

• The subtitle language cannot be switched if the subtitle language is not recorded, or if only one language is recorded.

• Switching the subtitle language may not be possible with some discs. In this case, the mark will be displayed.

• To clear subtitles during playback, press SUBTITLE and then press CLEAR, or press SUBTITLE until [Off] appears.

• For some discs, subtitle language selection can be made using the menu on the DVD. In this case, press MENU to display the

DVD menu screen and then make your selection.

• When you erase the resume position or replace a disc, the DVD player returns to the automatic setting in the setting menu (page

48).

Audio : Stereo

Note

With karaoke and other discs, set the appropriate audio type for singing and accompaniment after referring to information on the disc jacket or accompanying material.

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

SN 29343149 DV-L5E

33

Continuing Playback from a

Specified Location (Last Memory)

STANDBY

LAST M

The Last Memory function is convenient when you want to continue viewing a disc from the point where you were watching before. Unlike the resume function, the Last

Memory function is effective even if the DVD is removed from the player (Last Memory locations saved for Video

CDs are effective only if the disc remains loaded in the player).

Last Memory may not work reliably with some Video CDs that feature PBC.

7

ON

TV

ON / STANDBY

STANDBY

ANGLE AUDIO

OPEN / CLOSE

SUBTITLE

LAST M COND. M DIMMER DISPLAY

TOP MENU MENU

CH -

VOL +

ENTER

VOL -

CH +

RETURN SETUP

TV/ VCR

PAUSE STOP

FR FF

PLAY

DOWN UP

1 2 3

STEP/ SLOW

+

4

7

5

8

+10 0

RANDOM REPEAT

6

-

FUNCTION M

9

SEARCH CLEAR

A-B PROGRAM

REMOTE CONTROLLER RC449 DV

DVD TV

£

CLEAR

DVD

VCD

Memorizing a Last Memory location to return to later

DVD

VCD

Resuming playback from where LAST

MEMORY was pressed

1

LAST M

Press LAST M during play.

The “LAST” indicator lights on the player.

1

Load a disc that has a Last Memory point memorized.

Some DVDs will start playback automatically when loaded. In this case, press

7 to stop playback.

2

STANDBY

Press STANDBY to turn the power to standby, or stop playback with

7.

Once memorized, the memorized point will be recalled even if the power is turned off, or if the disc is ejected. Points on up to 5 discs can be memorized, and those points are recalled the next time any of the discs are played back.

• A Last Memory point can be memorized for only one Video CD at a time as the function is only effective until the Video

CD is removed from the player.

2

LAST M

Press LAST M while in the stop mode.

The disc begins playback at the memorized point.

• Last Memory mode may not function for some DVDs.

• You can use Last Memory for up to five discs (after that the one used least recently is deleted to make space for a new one).

• Even with a disc you have memorized with Last Memory, playback begins at the start of the disc if you press

£.

• This function is for playback of DVDs or

Video CDs only. You cannot use it with

CDs and MP3s.

To clear the Last Memory location

1 Load a disc that has a Last Memory point memorized.

Some DVDs will start playback automatically when loaded. In this case, press

7 to stop playback.

2 Press LAST M while in the stop mode.

The disc begins playback at the memorized point.

3 Once the picture appears, press LAST M again.

4 While “Last Memory” is displayed on the screen, press

CLEAR.

The “LAST” indicator disappears from the display.

SN 29343149 DV-L5E

Memorizing Settings for Often

Viewed DVDs (Condition Memory)

COND. M

You can store in memory settings for DVDs you often watch. Settings remain in memory even if you remove the disc from the player, or switch power to the player to standby. If you load a disc that has its settings memorized, “COND.” appears in the display. When you start playing the disc, the memorized settings are automatically recalled.

ON

TV

ON / STANDBY

STANDBY

ANGLE AUDIO

OPEN / CLOSE

SUBTITLE

LAST M COND. M DIMMER DISPLAY

TOP MENU MENU

CH -

VOL +

ENTER

VOL -

CH +

RETURN

TV/ VCR

PAUSE STOP

FR FF

SETUP

PLAY

DOWN UP

1 2 3

STEP/ SLOW

+

4

7

5

8

+10 0

RANDOM REPEAT

6

-

FUNCTION M

9

SEARCH CLEAR

A-B PROGRAM

REMOTE CONTROLLER RC449 DV

DVD TV

CLEAR

DVD

Memorizing Settings for DVDs

COND. M

Press COND. M during playback.

Settings are memorized for the disc currently playing.

The following six settings are memorized:

On Screen Display (page 17, 47)

Video Adjust (page 17, 42)

Multi-Angle (page 32)

Multi-language (pages 47)

Multi-Language subtitles (page 33, 48)

Parental Lock Level (page 51-53)

When a disc that has memorized settings is

loaded

“Condition Memory” will appear on the screen, and the previously memorized settings will be selected.

Erasing the recorded contents

Load a disc that has memorized settings, and press CLEAR while “Condition Memory” is being displayed. The disc’s recorded data will be erased.

Notes

• Settings are stored in memory for use any time.

• You can use Condition Memory for up to 15 discs (after that the one used least recently is deleted to make space for a new one).

• If you make changes to any of the settings memorized in

Condition Memory, press COND. M during playback to memorize new settings.

• Switching of the multi-language mode etc., is automatic on some discs.

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

SN 29343149 DV-L5E

35

Viewing Disc Information

Use DISPLAY to get current information about the disc currently loaded. You can get information about the titles and chapters on a DVD or tracks on a Video CD or CD or folders and tracks on a MP3. When viewing DVDs, you can also check the digital bitstream transmission rate.

DVD

VCD CD MP3

Viewing Disc Information during while a disc is playing

DISPLAY

Press DISPLAY during while a disc is playing. Press DISPLAY repeatedly to change the information being displayed.

The disc information is displayed superimposed over the video image on the screen.

Press and hold DISPLAY to display the time remaining on the disc.

When you release the button, the information disappears.

Video CD (with PBC disabled)

current track number/ total number of tracks

Play

All

Video CD's remaining time current track number

Video CD's total time

«

Video CD's total elapsed time

Play

Track

3

3.56/

Video CD's total elapsed time

3/12

–59.26/

10.53

70.19

10.53

5.23

The display changes for each type of disc as follows each time the button is pressed.

elapsed time of current track current track number total time of current tracks

«

Video CD's total elapsed time

DVD

current title/chapter number elapsed time of current title

Play

Title

3–29

–51.06/

49.58

101.04

remaining time of current title remaining total time of current title

« current title/chapter number elapsed time of current title

CD

Play

Track

3

1.27/

10.53

5.23

remaining time of current track total time of current tracks

«

Display off current track number elapsed time of current track

Play

Chapter

3–32

0.21/

54.53

1.51

elapsed time of current chapter elapsed total time of current chapter

« current title/chapter number elapsed time of current title

Play

Chapter

3–32

–1.30/

54.53

1.51

remaining time of current chapter remaining total time of current chapter

« current title/chapter number elapsed time of current title

Play

Tr. Rate:

3–32 54.53

6.3

transmission rate level meter transmission rate level

«

Display off

Play

Track

3

–3.29/

0.03

3.32

remaining time of current track

« remaining total time of current tracks current track number current total time of tracks

Play

All

1/10

–66.20/

1.13

66.32

CD's remaining time

«

CD's total time

Display off

SN 29343149 DV-L5E

Using DIMMER function

Press DIMMER to change the display brightness.

Each time DIMMER is pressed, the display brightness of the unit changes as shown below.

Normal

→ Dim → Very Dim → Normal

MP3

current track number/ total number of tracks in folder elapsed time of current track

Play

Track

16/20

TRACK1~1

0.05

track name current folder number/ total number of folder

« elapsed time of current track

Play

Folder

2/10

FOLDER~1

0.05

folder name

« current folder number/ current track number elapsed time of current track

Play

Track

2–16

–2.25

0.05

2.30

remaining time of current track

« current folder number/ current track number total time of current track elapsed time of current track

Play

Tr. Rate:

2–16

128kbps

transmission rate level

«

Display off

0.05

Notes

• Depending on the format and type of disc being used, not all screens may be displayed.

• When playing Video CDs in PBC mode or unfinalized CD-Rs not all the above information is displayed.

2/3

ON

TV

ON / STANDBY

STANDBY

ANGLE AUDIO

OPEN / CLOSE

SUBTITLE

LAST M COND. M DIMMER DISPLAY

TOP MENU MENU

CH -

VOL +

ENTER

VOL -

CH +

RETURN

TV/ VCR

PAUSE STOP

FR FF

SETUP

PLAY

DOWN UP

1 2 3

STEP/ SLOW

+

4

7

5

8

+10 0

RANDOM REPEAT

6

-

FUNCTION M

9

SEARCH CLEAR

A-B PROGRAM

REMOTE CONTROLLER RC449 DV

DVD TV

DISPLAY

DIMMER

DVD

VCD CD MP3

Viewing Disc Information during while a disc is stopped

DISPLAY

Press DISPLAY during while a disc is stopped to display DVD title and chapter information or Video CD and CD track information or MP3 folder and track information. Press

DISPLAY again to turn the display off.

Information about the titles and chapters or folders and tracks on a disc is displayed.

When the information exceeds the space on the screen, use the cursor buttons (

2/

3) to move to other screens.

DVD

Information: DVD

Title Chapter Title Chapter

01 1 ~ 30 06 1 ~ 10

02

03

04

05

1 ~ 21

1 ~ 46

1 ~ 12

1 ~ 8

07

08

09

10

1 ~ 13

1 ~ 5

1 ~ 4

1 ~ 8

1/2

DISPLAY

Exit

Titles and number of chapters in each title

Video CD and CD

Information: Compact Disc

Total time

Track Time

01

02

03

04

05

5 . 23

4 . 55

6 . 13

5 . 45

5 . 10

72 . 04

Track

Time

06

6 . 51

07

08

3 . 18

6 . 50

09

10

4 . 16

3 . 22

1/2 DISPLAY

Exit

Total playing time of disc, tracks and track times

MP3

Information: MP3

Folder

01

02

03

04

05

Track

1 ~ 9

1 ~ 11

1 ~ 3

1 ~ 22

1 ~ 15

Folder

01

02

03

04

05

Track

1 ~ 10

1 ~ 13

1 ~ 5

1 ~ 4

1 ~ 8

DISPLAY

Exit

1/2

Folders and number of tracks in each folder

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

37

SN 29343149 DV-L5E

Adjusting Audio and Video Settings

The procedure on this page describes how to operate the menus on the Setup screen. These menus are used to set and adjust a number of system settings. The various functions that can be adjusted are covered throughout this manual. The procedure on this page provides a basic outline for using the Setup screen menus.

Using the Setup Screen Menus

1

ON

Press ON (STANDBY/ON on the front panel).

2

SETUP

3

4

5

Press SETUP.

The Setup screen appears.

Example

Audio Video1 V2 Language General

Audio DRC — Off

Dolby Digital Out — Dolby Digital

DTS Out — Off

96kHz PCM Out —

MPEG Out —

96kHz

3 48kHz

MPEG

3 PCM

Setup audio

Digital output format/tone adjust

Move SETUP Exit

Use the cursor buttons (

2/3) to

select the menu you want.

As each menu is selected with the cursor, the settings appear below the menu heading.

Use the cursor buttons (

) to enter

the menu.

The top item within the menu becomes highlighted.

Example

Audio Video1 V2 Language

General

Audio DRC — Off

Dolby Digital Out Dolby Digital

DTS Out

96kHz PCM Out —

MPEG Out —

Dolby Digital

3 PCM

96kHz

3 48kHz

MPEG

3 PCM

Change Dolby Digital output mode

Move ENTER Select SETUP Exit

Use the cursor buttons (

5/) to

select the setting you want to change.

The options available for each setting appear to the right when the setting is selected. The current setting appears with the setting indicator lit.

6

7

ENTER

8

RETURN

Use the cursor buttons (

3) to enter

the setting options.

Example

Audio Video1 V2 Language General

Audio DRC — Off

Dolby Digital Out

DTS Out

96kHz PCM Out —

MPEG Out —

Dolby Digital

Dolby Digital

3 PCM

96kHz

3 48kHz

MPEG

3 PCM

Output Dolby Digital

Move

ENTER

Select

SETUP

Exit

• Not all menu options can be changed while a disc is playing. In these cases, the options appear grayed out on the screen and cannot be adjusted. To change these settings, press

7 first before pressing SETUP.

• Operating the menu after pressing

7 may cancel the resume function.

• Some menu options are not immediately effective if set while a disc is playing. To make these settings effective, stop playback and then start again, or change the settings while the disc is stopped.

Use the cursor buttons (

5/) to

select a new setting and press

ENTER to set the new setting in memory.

Press RETURN or the cursor button (

2) to exit the options without making any changes.

Press RETURN or the cursor button

(

2) to go back to the main menu bar

to select another menu.

9

SETUP

Press SETUP to close the Setup screen.

The Setup screen closes.

Notes

• If you turn off the DVD player during setup, the settings are canceled. Press SETUP to finish the setup.

• The memorized resume position may be erased by setup.

• The Setup screen always shows the latest settings.

SN 29343149 DV-L5E

2/3/5/

RETURN

ON

TV

ON / STANDBY

STANDBY

ANGLE AUDIO

OPEN / CLOSE

SUBTITLE

LAST M COND. M DIMMER DISPLAY

TOP MENU MENU

CH -

RETURN

TV/ VCR

PAUSE STOP

VOL +

ENTER

VOL -

FR FF

CH +

SETUP

PLAY

DOWN UP

1 2 3

STEP/ SLOW

+

4

7

5

8

+10 0

RANDOM REPEAT

6

-

FUNCTION M

9

SEARCH CLEAR

A-B PROGRAM

REMOTE CONTROLLER RC449 DV

DVD TV

ENTER

SETUP

When setting up for the first time

It is recommended to set up player using the Setup Navigator

(page 17). If you selected [Auto Start Off] when the Setup

Navigator appeared, you may still set up the player using the

Setup Navigator in the General menu screen.

If you choose not to use the Setup Navigator, be sure to make the necessary settings in the Setup screen

Audio, Video 1, Video 2 and Language menus as described on the following pages.

Some DVDs start playing automatically when loaded in the player. If a DVD has been loaded, be sure to press

7 before proceeding.

Note

The next time you press SETUP, you’ll see the menu screen that you exited from last time.

How to interpret the setting indicator colors

in the Setup screen menus

When setting up the system, or when making adjustments, it is convenient to know what settings are applicable to the different disc formats. When the settings appear for each menu option, the currently selected setting appears with the setting indicator highlighted in one of three colors: blue, green or yellow. These colors correspond to what formats the menu option effects as shown in the table below.

Color of indicator

Blue

Yellow

Green

Disc format(s)

DVD only

DVD/Video CD

All compatible formats

Note

If a setting applicable only to DVDs is changed while a Video CD or

CD is loaded, a blue DVD icon appears in the upper right hand corner of the screen to indicate that the setting is not applicable to the currently loaded disc. The setting will be effective the next time a

DVD is loaded.

Changing to the Setup Screen “Expert”

Menu Mode

The Setup screen menus are divided into two levels, [Basic] and [Expert], to make this unit more convenient to operate for different levels of users. The [Basic] menu mode contains functions that may be considered necessary for the basic operations of this player and helpful on-screen information identified by the

i

mark. The [Expert] menu mode adds to the

[Basic] menu mode additional functions of the player that can be adjusted to further personalize performance of the player.

In this manual, functions that are contained in the [Expert] menu mode are identified by the

Expert

icon.

Make changes to the [Setup Menu Mode] setting in the Setup screen General menu.

Audio Video1 V2 Language

General

Setup Menu Mode

Setup Navigator

— Expert

Basic

Parental Lock — Off (us)

Change menu mode

Move

ENTER

Select

SETUP

Exit

Settings: Expert

Basic (Factory setting)

Note

On-screen information only appears in the [Basic] menu mode .

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

SN 29343149 DV-L5E

39

Adjusting Audio and Video Settings

Adjusting the Dynamic Range of the

Audio Soundtrack

Audio DRC stands for Audio Dynamic Range Compression.

When Audio DRC is on, soft sounds such as dialog can be heard more clearly without making loud sounds even louder.

Select from three levels of compression depending on how much effect you want. When Audio DRC is set to [Off], there is no effect on the audio source.

Make changes to the [Audio DRC] setting in the Setup screen

Audio menu.

Audio Video1 V2 Language General

Audio DRC —

Dolby Digital Out

Off

On

DTS Out — Off

96kHz PCM Out

MPEG Out

— 96kHz

3 48kHz

— MPEG

3 PCM

Dynamic playback at low volume

Move SETUP Exit

Settings: Off (Factory setting)

On

Notes

• Audio DRC is only effective with Dolby Digital audio sources.

• The level of Audio DRC may differ depending on the DVD.

• If you have set the [Dolby Digital Out] to [PCM] and the [Digital

Out] setting to [On], the Audio DRC effect is output through the digital out jack.

• The effect of Audio DRC depends on your speakers and AV amplifier settings.

Setting the Digital Audio Output

This player is capable of digital audio output for Dolby Digital,

DTS, MPEG, and signals with a sampling rate of 96 kHz.

Make settings in the Setup screen Audio menu to reflect the capabilities of the components that you have made digital connections to.

Notes

• If you have already completed the Setup Navigator screen operations, the settings on this page have already been set by the player.

• If you have made only stereo line connections (analog) using the supplied audio cord, it is not necessary to make any changes in this menu.

Dolby Digital Out

This player is capable of outputting the Dolby Digital surround sound audio signal. When the player is connected to an AV component that has a built-in Dolby Digital decoder, select

[Dolby Digital]. This player can also convert the Dolby Digital signal to a digital Linear PCM signal, the same digital signal output from a CD. Select [Dolby Digital

3 PCM] when you have made connections to an amplifier or receiver with a

Dolby Pro Logic decoder or a Digital Analog Converter (DAC).

Audio Video1 V2 Language General

Audio DRC — Off

Dolby Digital Out —

DTS Out

96kHz PCM Out —

MPEG Out —

Dolby Digital

Dolby Digital

3 PCM

96kHz

3 48kHz

MPEG

3 PCM

Change Dolby Digital output mode

Move

SETUP

Exit

Settings: Dolby Digital (Factory setting)

Dolby Digital

3 PCM

SN 29343149 DV-L5E

DTS Out

This player is capable of outputting DTS digital audio for DVDs recorded in DTS. When this player is connected to an AV component that has a built-in DTS decoder, select [DTS]. If your system is not equipped to decode DTS, select [Off]. Refer to the operating instructions supplied with your audio components if you are unsure about compatibility with DTS.

Audio Video1 V2 Language

General

Audio DRC — Off

Dolby Digital Out — Dolby Digital

DTS Out — Off

96kHz PCM Out DTS

MPEG Out

MPEG

3 PCM

Change DTS output mode

Move SETUP

Exit

Settings: Off (Factory setting)

DTS

Note

If you have made digital audio connections to component(s) not equipped to decode the DTS digital bitstream, be sure to select [Off].

If a DTS signal is output without decoding, the output is digital noise that could potentially cause damage to your speakers.

96 kHz PCM Out

This player is capable of outputting digital signals with a sampling frequency of 96 kHz. If you have made connections to a component capable of processing this signal rate, select

[96 kHz] for the signal to be output as is. As some components are incapable of processing digital signal input with sampling rates of 96 kHz, selecting [96 kHz

3 48 kHz] compresses the signal to a standard signal with a sampling rate of 48 kHz.

Audio Video1 V2 Language

General

Audio DRC — Off

Dolby Digital Out — Dolby Digital

DTS Out — Off

96kHz PCM Out —

MPEG Out

96kHz

3 48kHz

96kHz

Change 96kHz output mode

Move SETUP Exit

Settings: 96 kHz

3 48 kHz (Factory setting )

96 kHz

Note

On DVDs that contain copy protection, the 96 kHz signal may only be output from the analog audio jacks.

MPEG Out

This player is capable of outputting the MPEG digital bitstream. When the player is connected to an AV component that has a built-in MPEG decoder, select the [MPEG] setting.

Otherwise, select [MPEG

3 PCM] to convert the digital signal to the PCM signal, the digital signal output from a CD.

Audio Video1 V2 Language

General

Audio DRC —

Dolby Digital Out —

DTS Out —

96kHz PCM Out —

Off

Dolby Digital

Off

MPEG

MPEG Out — MPEG

3 PCM

Change MPEG audio output mode

Move

SETUP

Exit

Settings: MPEG

MPEG

3 PCM (Factory setting)

Digital Out

Expert

Depending on your preferences and the type of connections made, you may opt not to have the digital audio signal output at all. When this setting is set to [Off] there is no signal output from the digital audio output jacks.

Make changes to the [Digital Out] setting in the Setup screen

Audio menu in the [Expert] menu mode (page 39).

Audio Video1 V2 Language General

Audio DRC —

Dolby Digital Out —

Off

Dolby Digital

DTS Out

96kHz PCM Out

MPEG Out

Digital Out —

Off

96kHz

3 48kHz

MPEG

3 PCM

On

Off

Move SETUP Exit

Settings: On (Digital bitstream is output) (Factory setting)

Off (Digital bitstream is not output)

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

SN 29343149 DV-L5E

41

Adjusting Audio and Video Settings

Setting the TV Screen Size

The width-to-height ratio of conventional TVs is 4:3, while the width-to-height ratio of wide screen and high-definition TVs is

16:9. This width-to-height ratio is called the aspect ratio.

When viewing software recorded in different aspect ratios, the image’s height to width ratio can be switched to match the TV or monitor being used.

Make changes to the TV screen size in the [TV Screen] setting in the Setup screen Video 1 menu. Please note that changes to the [TV Screen] setting cannot be made when a disc is playing. Stop playback of the disc before attempting to make any changes.

Audio Video1 V2 Language General

TV Screen — 4:3(Letter Box)

4:3(Pan&Scan)

16:9(Wide)

Select your display preference

Move SETUP Exit

Settings: 4:3 (Letter Box)

4:3 (Pan & Scan)

16:9 (Wide) (Factory setting)

Notes

• If [Standard (4:3)] is selected in the Setup Navigator screen, [4:3

(Letter Box)] is selected on this screen. If you prefer the pan&scan format, change the settings on this screen.

• Whether the aspect can be switched or not depends on the disc.

Please refer to the information written on the disc jacket, etc.

• Some discs may not include the screen format selected in the [TV

Screen] setting. When this occurs, the standard TV screen format available on the disc is automatically selected.

Differences in screen sizes and DVD

formats

The number of screen size formats currently available can be somewhat confusing. If set incorrectly, the video presentation may not appear as it should. The following diagrams and descriptions are intended to help you set your TV screen size in a way that will allow you to fully enjoy the digital video of

DVD.

The settings in the [TV Screen] setting are perhaps most applicable when the DVD you are watching is programmed in the wide screen format. If you have a standard TV, select either [4:3 (Letter Box)] or [4:3 (Pan & Scan)] based on your personal preference. If you have a wide screen TV, select

[16:9 (Wide)].

When viewing a wide screen TV or monitor

DVD screen size format

Setting and Appearance

Wide screen format DVD

Please note that there are some wide screen letter box formats that place black bars at the top and bottom of the screen. This is not a malfunction.

“Wide” setting

Standard screen format DVD

When viewing a standard screen format DVD on a wide screen

TV, black bars may be automatically placed at the side of the screen to adjust to the

DVD format.

“Wide” setting

Standard screen format DVD

(unnatural stretched effect)

If you are viewing a standard screen format DVD on a wide screen TV, the picture may appear ‘stretched’ on the screen. To remedy this condition, change your wide screen TV to display a standard

(4:3) screen. Refer to the instructions supplied with your wide screen TV or monitor for more information.

“Wide” setting

When viewing a standard size TV or monitor

DVD screen size format Setting and Appearance

Wide screen format DVD

The Letter box presentation places black bars at the top and bottom portions of the screen to provide the full wide screen presentation of a movie on a standard TV (4:3 aspect ratio).

“Letter Box” setting

Wide screen format DVD

The Pan & Scan presentation crops both sides of the wide screen presentation to use the full standard TV screen.

“Pan & Scan” setting

Standard screen format DVD

If you have a standard TV, the standard screen format will be presented regardless of the setting.

Any setting

Wide screen format DVD

(unnatural squeezed effect)

If you are viewing a wide screen format DVD on a standard TV and the [TV Screen] setting is set to [16:9 (Wide)], the picture may appear ‘squeezed’ on the screen. To remedy this condition, select either [4:3

(Letter Box)] or [4:3 (Pan &

Scan)].

“Wide” setting

SN 29343149 DV-L5E

Setting the Video 1 Options

Switching the S-Video Output

Expert

You can Switch the kind of S-Video signal output from the S-

Video outputs. If you connected your TV with an S-Video cord, in rare cases the TV picture may appear stretched. In this case switch the output from [S2] to [S1].

Make changes in the [S-Video Out] in the Setup screen Video

1 menu in the [Expert] menu mode (page 39).

Audio Video1 V2

Language General

TV Screen — 16:9(Wide)

S-Video Out — S1

Screen Saver

S2

Move SETUP Exit

Settings: S1

S2 (Factory Setting)

Turning the Screen Saver On and Off

Expert

As a protective function against residual images on the TV screen or monitor, a phenomenon referred to as “screen burn”, the screen saver appears when the same screen has been displayed for a length of time. By default, the screen saver is turned on. However, the screen saver function can be turned on and off at your discretion.

Make changes to the [Screen Saver] setting in the Setup screen Video 1 menu in the [Expert] menu mode (page 39).

Audio Video1 V2

Language General

TV Screen — 16:9(Wide)

S-Video Out — S2

Screen Saver — On

Off

Move SETUP Exit

Settings: On (Factory setting)

Off

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

SN 29343149 DV-L5E

43

Adjusting Audio and Video Settings

Adjusting the Video Quality

You can either select a preprogrammed setting designed to match certain program types or make adjustments to match your own preferences and save them in the player’s memory.

Make changes to the [Video Adjust] setting in the Setup screen Video 2 menu.

Adjusting the picture quality settings

– To create your own setting (1)

1 Use the cursor button (

3) to select [Start] then press

ENTER.

Audio V1 Video2

Language General

Background — Gray

Video Adjust — Start

Picture Quality Controls

Move

SETUP

Exit

Selecting a preprogrammed setting

1 Use the cursor button (

3) to select [Start] then press

ENTER.

Video Memory Select

Video Setup

2 Use the cursor button (

∞) to select [Video Setup] then press ENTER.

Video Memory Select

Video Setup

3 Use the cursor buttons (

2/3) to select the setting to [On] or

[Off].

Video Memory Select

Video Setup

2 Press ENTER.

Standard

Memory 1

Cinema

Memory 2

Animation

Memory 3

Standard (Factory Setting)

Presents the video with no effect added.

Cinema

Delivers a cinema-like picture.

Animation

Provides images with bright clear colors.

Memory 1, Memory 2, and Memory 3

These are user programmable settings. See ‘Adjusting the picture quality settings’ on pages 44 and 45 for more information.

3 Use the cursor buttons (

2/3/5/∞) to select one of the preprogrammed picture quality settings.

If there is a DVD or Video CD playing, the effects of each setting can be viewed while it is highlighted on the screen. This may be useful in selecting an appropriate setting.

4 Press ENTER.

The new selection is set.

Notes

• Each picture quality setting is defined by a number of individual settings, described in ‘Adjusting the picture quality settings’ on pages 44 and 45.

• Depending on the disc and the TV/monitor, you may not see the effect clearly.

Fine Focus

Move

ENTER

On

Select

Off

DISPLAY Check

4 Use the cursor buttons (

5/∞) to select the setting to adjust.

You can adjust any or all of the following picture quality factors:

Fine Focus

Switch on to reveal greater detail (higher resolution) in the picture.

Contrast

Adjusts the contrast of the elements in the picture.

Sharpness

Adjusts the sharpness of the mid-frequency (less detailed) elements in the picture. (This setting is only effective when [Fine

Focus] is [On].)

Chroma Level

Adjusts how saturated colours appear.

Hue

Adjusts the overall colour balance between red and green. (This is only effective when the player is connected using the VIDEO

OUT or S-VIDEO OUT jacks.)

SN 29343149 DV-L5E

5 Use the cursor buttons (

2/3) to adjust the settings.

Adjust these while a disc is playing to see the effect of changes immediately.

6 Repeat steps 4 and 5 to make adjustments to other settings.

If you would like to save the settings in the player’s memory, be sure to select either [1], [2], or [3] in the [Memory] setting to establish which memory location to save the new settings in.

Please note that if you select a location where settings have already been saved, the old settings will be replaced by the new ones.

Adjusting the picture quality settings

– To create your own setting (2)

1 Use the cursor button (

3) to select [Start] then press

ENTER.

Memory

Move

ENTER

Off 1 2 3

Select

DISPLAY

Check

7 When you are finished making adjustments, press ENTER to establish the new settings.

Video Memory Select

Video Setup

2 Use the cursor button (

∞) to select [Video Setup] and press

ENTER.

3 Press DISPLAY.

Fine Focus

Contrast

Sharpness

Chroma Level

Hue

Memory

On Off min soft min

max

fine

max green red

Off 1 2 3

4 Use the cursor buttons (

5/∞) to select the setting and use the cursor buttons (

2/3) to adjust the settings.

Adjust these while a disc is playing to see the effect of changes immediately.

5 To memorize the setting, select Memory 1, 2, 3, then press

ENTER.

The previous setting will be erased.

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

SN 29343149 DV-L5E

45

Adjusting Audio and Video Settings

Setting the Video 2 Options

Changing the Background of the Screen

You can select a background to appear when the player is in the stop mode.

Make changes to the [Background] setting in the Setup screen

Video 2 menu.

Audio V1 Video2

Language General

Background — Gray

Video Adjust — Black

Adjust picture quality

Move

Settings: Gray

Black

SETUP Exit

Selecting the Type of Paused Image to

Display

Expert

This function lets you view a clear still-image when DVD playback is paused.

Make changes in the [Still Picture] setting in the Setup screen

Video 2 menu in the [Expert] menu mode (page 39).

Audio V1 Video2

Language General

Background — Gray t

Video Adjust —

Still Picture — Field

On Screen Display

Angle Indicator

Frame

Auto

Move

SETUP

Exit

Settings: Field (Picture shake will be eliminated during a paused picture.)

Frame (Select to obtain higher picture quality.)

Auto (Selects [Field] or [Frame] automatically according to the disc.) (Factory setting)

Setting the Position of the On-screen

Display

Expert

When watching conventional software on a wide screen TV, the operation display is at the very top of the screen, and may be difficult to see. Changing the position of the display lets you see operation indicators clearly even on a wide screen TV.

Alternatively, you can choose to turn them off completely with the [Off] setting.

Make changes in the [On Screen Display] in the Setup screen

Video 2 menu in the [Expert] menu mode (page 39).

Audio V1 Video2

Language General

Background — Gray

Video Adjust

Still Picture — Auto

On Screen Display

Angle Indicator

— Position-Wide

Position-Normal

Off

Move SETUP Exit

Settings: Position-Wide

Position-Normal (Factory setting)

Off

Note

This setting is only effective with DVDs that contain a 4:3 aspect ratio video presentation.

Turning the angle indicator on and off

Expert

When a picture recorded in different angles is played back is displayed on the screen. This setting lets you see clearly whether the playback picture is recorded in multiple angles or not.

Turn the angle indicator on or off in the [Angle Indicator] setting in the Setup screen Video 2 menu in the [Expert] menu mode (page 39).

Audio V1 Video2

Language General

Background — Gray

Video Adjust

Still Picture

On Screen Display

Angle Indicator

— Position-Normal

Auto

On

Off

Move

SETUP

Exit

Settings: On ( is displayed) (Factory setting)

Off (Not Displayed)

Note

Even when the [Angle Indicator] setting is set to [Off], the indicator in the display panel of the player lights during multi-angle playback. Therefore, it is possible to know when the multi-angle function can be used without having to display the icon on the screen.

SN 29343149 DV-L5E

Setting the Language Options

DVDs have the capacity to contain a great deal of audio information, which includes the ability to hold up to 8 different language tracks and subtitle information in as many as 32 different languages. This section outlines the variety of audio language and subtitle options available with this player.

Please note that if you have completed the Setup Navigator, the audio and subtitle language options have automatically been set in accordance with the [OSD Language] (the language that appears on the screen).

Note

DVDs differ in content and do not all contain multiple language or subtitle information. Therefore making settings in this section may have no effect on some DVDs.

Setting the On-screen Display (OSD)

Language

This setting is used to establish the language that operation indicators and on-screen messages and operations display.

Change this setting in the Setup screen Language menu [OSD

Language] setting.

Audio Video1 V2 Language General

OSD Language —

Audio Language

Subtitle Language

Auto Language

English français

Deutsch

Italiano

Español

Select the On Screen Language

Move SETUP Exit

Settings: English (Factory setting)

français

Deutsch

Italiano

Español

Asian models only

English (Factory setting)

Notes

• The menu settings may be different from those shown above.

• The [OSD Language] setting is factory set to [English]. If you want English to be displayed, it is not necessary to adjust this setting.

Selecting an audio language preference

The audio language that you normally listen to can be selected from the various audio languages on a DVD. Even when the audio language is changed during playback by pressing AUDIO, the language selected at this setting will be selected as the default when the DVD is changed.

Make changes to the [Audio Language] setting in the Setup screen Language menu.

You cannot make this setting with a disc playing.

Audio Video1 V2 Language

General

OSD Language

Audio Language

Subtitle Language

Auto Language

English

French

German

Italian

Spanish

Other

Setup audio language

Move

SETUP

Exit

Settings: English (Factory setting)

French

German

Italian

Spanish

Other (For details on how to select other languages, see ‘When [Other] is selected’ on page

49.)

Asian models only

English (Factory setting)

Chinese

Other

Note

The menu settings may be different from those shown above.

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

SN 29343149 DV-L5E

47

Adjusting Audio and Video Settings

Setting the Language Options

Selecting a subtitle language preference

The subtitle language that you will normally display can be selected from the subtitles programmed on a disc. Even when the subtitle language is changed during playback by pressing

SUBTITLE, the language selected at this setting will be selected when the disc is changed.

Make changes to the [Subtitle Language] setting in the Setup screen Language menu.

You cannot make this setting with a disc playing.

Audio Video1 V2 Language General

OSD Language

Audio Language

Subtitle Language —

Auto Language

English

French

German

Italian

Spanish

Other

Setup disc's subtitle language

Move

SETUP

Exit

Settings: English (Factory setting)

French

German

Italian

Spanish

Other (For details on how to select other languages, see ‘When [Other] is selected’ on page 49.)

Asian models only

English (Factory setting)

Chinese

Other

Note

The menu settings may be different from those shown above.

Setting Auto Language to control subtitle

and audio language based on program content

When the Auto Language function is used, foreign movies are shown with the original audio soundtrack and subtitles in the language selected in the [Subtitle Language] menu option.

Domestic films are shown with the original audio soundtrack and no subtitles. (This setting may not be effective with all

DVD discs.)

Make changes to the [Auto Language] setting in the Setup screen Language menu.

You cannot make this setting with a disc playing.

Audio Video1 V2 Language General

OSD Language —

Audio Language —

Subtitle Language —

Auto Language —

English

English

English

On

Off

Play dialog, etc. in original language

Subtitle ON with foreign audio

Move

SETUP

Exit

Settings: On (Factory setting)

Off

Note

The Auto Language function operates only when this function is set to [On], and the language set for the [Audio Language] and [Subtitle Language] settings is the same.

Selecting a DVD menu language preference

Expert

In addition to containing different audio languages, DVD may also contain menu screens in different languages as well.

Setting a DVD language preference, sets the selected language as a default when DVDs with menu information in that language are encountered.

Selecting [w/ Subtitle Language] automatically assigns the language selected in the [Subtitle Language] setting.

Make changes to the [DVD Language] setting in the Setup screen Language menu in the [Expert] menu mode (page 39).

You cannot make this setting with a disc playing.

Audio Video1 V2 Language

OSD Language

Audio Language

Subtitle Language

Auto Language

DVD Language

Subtitle Display

Subtitle Off

General w/ Subtitle Language

English

French

German

Italian

Spanish

Other

Move SETUP Exit

Settings: w/ Subtitle Language (Factory setting)

English

French

German

Italian

Spanish

Other (For details on how to select other languages, see ‘When [Other] is selected’ on page

49.)

Asian models only

w/ Subtitle Language (Factory setting)

English

Chinese

Other

Notes

• The menu settings may look different from the one shown above.

• If this function is not effective, the languages that can be selected may also be selected in the DVD menu. Press MENU to open the

DVD menu and make your selection accordingly.

SN 29343149 DV-L5E

Selecting subtitles, assist subtitles or no

subtitles

Expert

Use this function to turn the subtitles on or off. Additionally, some DVDs provide assist subtitles that provide additional explanations of scenes in addition to the standard subtitles for viewers who are hard of hearing. Select [Assist Subtitle] to display these subtitles on DVDs where this function is offered.

Make changes to the [Subtitle Display] setting in the Setup screen Language menu in the [Expert] menu mode (page 39).

You cannot make this setting with a disc playing.

Audio Video1 V2 Language

General

OSD Language —

Audio Language

Subtitle Language

Auto Language

DVD Language

Subtitle Display

Subtitle Off

English

English

English

On

On

Off

Assist Subtitle

Move SETUP Exit

Settings: On (Factory setting)

Off

Assist Subtitle

Notes

• If there is no subtitle information recorded on the DVD, no subtitles are displayed even if this function is set to [On].

• This setting serves as a default as whether or not to display subtitles. Even if this option is set to [Off], subtitles can be displayed by pressing SUBTITLE. Similarly, if this option is set to

[On], the subtitles can be turned off by pressing SUBTITLE and then CLEAR.

Forcing subtitles to be displayed

Expert

Even when the subtitles are turned off, some DVDs will nevertheless display them on the screen. This setting allows you to select the language of the subtitles to be displayed with this type of DVD.

Select [With Audio] to display the subtitles in the same language as the currently selected Audio Language. Select

[Selected Subtitle] to display the subtitles in the language set in the [Subtitle Language] setting.

Make changes to the [Subtitle Off] setting in the Setup screen

Language menu in the [Expert] menu mode (page 39).

You cannot make this setting with a disc playing.

Audio Video1 V2 Language General

OSD Language —

Audio Language —

Subtitle Language —

Auto Language —

DVD Language —

Subtitle Display

Subtitle Off —

English

English

English

On

English

With Audio

Selected Subtitle

Move

SETUP

Exit

Settings: With Audio

Selected Subtitle (Factory setting)

When [Other] is selected

When you want to select one of the 136 languages as the main audio language, follow the steps below when the following screen appears.

A language code list can be found on page 50.

Audio Video1 V2 Language General

OSD Language

Audio Language

Subtitle Language

Auto Language

English

French

German

Italian

Spanish

Other

Setup audio language

Move

ENTER

Select

SETUP

Exit

1 Use the cursor buttons to select [Other] and press ENTER.

The language selection screen appears.

Audio Video1

V2

Audio Language

List of Language

Language General

Code (0~2) ja: Japanese

1 0 0 1

Setup audio language

–/+

Move

SETUP

Select

RETURN

ENTER

Return

Exit

2 Use the cursor buttons (

2/3) to select either “List of

Languages” or “Code”.

3 If you select “List of Languages”, use the cursor buttons

(

5/∞) to select the language.

For languages which are only shown as a code, please refer to

‘Language Code List’ on page 50.

List of Languages ja: Japanese

If you select “Code”, use the cursor buttons (

5/∞) to input the numbers of the input code.

Use the cursor buttons (

2/3) to change the position of the cursor. You can also use the number buttons to enter the code.

Code (0~2)

1 0 0 1

4 Press ENTER to set the new language.

To exit the screen without making any changes, press RETURN.

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

SN 29343149 DV-L5E

49

Adjusting Audio and Video Settings

Language Code List

Language codes are used when setting the audio and subtitle language preferences (page 47, 48).

Language

Japanese (ja)

English (en)

French (fr)

German (de)

Italian (it)

Spanish (es)

Chinese (zh)

Dutch (nl)

Portuguese (pt)

Swedish (sv)

Russian (ru)

Korean (ko)

Greek (el)

Afar (aa)

Abkhazian (ab)

Afrikaans (af)

Amharic (am)

Arabic (ar)

Assamese (as)

Aymara (ay)

Azerbaijani (az)

Bashkir (ba)

Byelorussian (be)

Bulgarian (bg)

Bihari (bh)

Bislama (bi)

Bengali (bn)

Tibetan (bo)

Breton (br)

Catalan (ca)

Corsican (co)

Czech (cs)

Welsh (cy)

Danish (da)

Bhutani (dz)

Esperanto (eo)

Estonian (et)

Basque (eu)

Persian (fa)

Finnish (fi)

Fiji (fj)

Faroese (fo)

Frisian (fy)

Irish (ga)

Scots-Gaelic (gd)

Galician (gl)

Guarani (gn)

Input-code

0208

0209

0214

0215

0218

0301

0315

0319

0113

0118

0119

0125

0126

0201

0205

0207

1620

1922

1821

1115

0512

0101

0102

0106

1001

0514

0618

0405

0920

0519

2608

1412

0610

0615

0625

0701

0704

0712

0714

0325

0401

0426

0515

0520

0521

0601

0609

Input-code

1215

1220

1222

1307

1309

1311

1312

1314

1112

1113

1114

1119

1121

1125

1201

1214

0911

0914

0919

0923

1009

1023

1101

1111

0721

0801

0809

0818

0821

0825

0901

0905

1503

1513

1518

1601

1612

1619

1721

1315

1318

1319

1320

1325

1401

1405

1415

Language

Gujarati (gu)

Hausa (ha)

Hindi (hi)

Croatian (hr)

Hungarian (hu)

Armenian (hy)

Interlingua (ia)

Interlingue (ie)

Inupiak (ik)

Indonesian (in)

Icelandic (is)

Hebrew (iw)

Yiddish (ji)

Javanese (jw)

Georgian (ka)

Kazakh (kk)

Greenlandic (kl)

Cambodian (km)

Kannada (kn)

Kashmiri (ks)

Kurdish (ku)

Kirghiz (ky)

Latin (la)

Lingala (ln)

Laothian (lo)

Lithuanian (lt)

Latvian (lv)

Malagasy (mg)

Maori (mi)

Macedonian (mk)

Malayalam (ml)

Mongolian (mn)

Moldavian (mo)

Marathi (mr)

Malay (ms)

Maltese (mt)

Burmese (my)

Nauru (na)

Nepali (ne)

Norwegian (no)

Occitan (oc)

Oromo (om)

Oriya (or)

Panjabi (pa)

Polish (pl)

Pashto, Pushto (ps)

Quechua (qu)

Language

Siswati (ss)

Sesotho (st)

Sundanese (su)

Swahili (sw)

Tamil (ta)

Telugu (te)

Tajik (tg)

Thai (th)

Tigrinya (ti)

Turkmen (tk)

Tagalog (tl)

Setswana (tn)

Tonga (to)

Turkish (tr)

Tsonga (ts)

Tatar (tt)

Rhaeto-Romance (rm)

Kirundi (rn)

Romanian (ro)

Kinyarwanda (rw)

Sanskrit (sa)

Sindhi (sd)

Sangho (sg)

Serbo-Croatian (sh)

Sinhalese (si)

Slovak (sk)

Slovenian (sl)

Samoan (sm)

Shona (sn)

Somali (so)

Albanian (sq)

Serbian (sr)

Twi (tw)

Ukrainian (uk)

Urdu (ur)

Uzbek (uz)

Vietnamese (vi)

Volapük (vo)

Wolof (wo)

Xhosa (xh)

Yoruba (yo)

Zulu (zu)

Input-code

2009

2011

2012

2014

2015

2018

2019

2020

1919

1920

1921

1923

2001

2005

2007

2008

2023

2111

2118

2126

2209

2215

2315

2408

2515

2621

1909

1911

1912

1913

1914

1915

1917

1918

1813

1814

1815

1823

1901

1904

1907

1908

SN 29343149 DV-L5E

Setting the Parental Lock Level

This player lets you set the Parental Lock if the DVD has a parental lock level recorded on it. With Parental Lock capable discs, you can block access to material you feel is inappropriate for your children. Refer to the DVD disc jacket and the accompanying documentation to see if a particular disc contains a parental lock level.

Make changes to the [Parental Lock] setting in the Setup screen General menu. Please note that changes to the

Parental Lock level cannot be made when a disc is playing.

Stop playback of the disc before attempting to make any changes.

You cannot select [Level] or [Country Code] until you have registered a password. Select [Password] to register a new password. See ‘Entering the password’ on the this page for how to register a new password.

Audio Video1 V2 Language General

Setup Menu Mode — Basic

Setup Navigator

Parental Lock — Password

Level

Country Code

Setup viewing restrictions

Move SETUP Exit

Settings: Password

(For information, refer to ‘Entering the Password’ on the this page.)

Level

(For information, refer to ‘Setting the Parental Lock

Level’ on the following page.)

Country Code

(For information, refer to ‘Setting the Country Code’ on the following page.)

When a DVD with a set Parental Lock level is loaded

Playback cannot be started until the code number has been correctly input by using the cursor buttons (

2/3/5/∞) or the number buttons, and ENTER has been pressed.

Entering the Password

When you select either [Level] or [Country Code], it is necessary to register the password (4-digit code number).

You’ll be asked to confirm your existing password before registering a new one. Use the following steps at any time you are asked to enter or confirm your password.

1 Use the cursor buttons (

5/∞) or the number buttons to select a number between 0 and 9.

You can also use the number buttons to enter the numbers directly. When entering your password for the first time, or changing it, you will be asked to reenter your password. When using the number buttons to confirm the password, the numbers appear as asterisks, and the cursor advances automatically to the next position.

Audio Video1 V2 Language General

Parental Lock: Register Code Number

Enter 4—Digit Code

+/–

Move

RETURN

ENTER

Return

Exit

2 Use the cursor buttons (

2/3) to move the cursor to a different position in the password.

When all four numbers of the passoword have been entered,

ENTER appears on the screen.

Audio Video1 V2 Language General

Parental Lock: Register Code Number

1 0 1 9

ENTER

Enter 4—Digit Code

+/–

Move

RETURN

SETUP

Return

Exit

3 Press ENTER to set the password.

The password is entered.

Notes

• Be sure not to forget your password. If you should forget it, reset the system, and enter a new password. To reset the system, see

‘Resetting the Player to System Settings’ (page 54). Please note that this procedure resets the system, and clears all saved settings, not just the password.

• Some discs lock out violent scenes. Refer to instruction notes on discs.

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

SN 29343149 DV-L5E

51

Adjusting Audio and Video Settings

Setting the Parental Lock Level

Setting the Parental Lock Level

Change the Parental Lock level to a higher or lower level according to the settings printed on the DVD disc jacket or accompanying documentation. If you use the Condition

Memory function to save the settings for a particular disc, the

Parental Lock level is saved as well. Because it is saved in memory, Parental Lock levels can be set for individual discs according to their content rather than a set level for all DVDs.

1 Select [Level] in the [Parental Lock] setting and press

ENTER.

The screen changes to the password input screen. You cannot select [Level] until you have registered a password. To enter the password, refer to ‘Entering the Password’ on the previous page.

Audio Video1 V2 Language

Parental Lock: Level Change

General

Level 1 2 3

Setup Parental Lock

4 5 6 7 8 Off

Move

ENTER

Select

RETURN

SETUP

Return

Exit

2 Use the cursor buttons (

2/3) to adjust the Parental Lock

Level.

The lock icons appear “unlocked” up to the selected level to indicate that access is available.

3 Press ENTER to set the new level.

The new Parental Lock level is set and the screen returns to the

General menu screen. To go back to the General menu screen without making any changes, press RETURN.

Changing the Password

Change your password whenever you feel it is necessary.

However, if you forget your existing password, you cannot enter this screen to change it.

1 Select [Password Change] in the [Parental Lock] setting and press ENTER.

The screen changes to the password input screen. To enter the password, refer to ‘Entering the Password’ on the previous page.

2 Use the cursor buttons (

2/3/5/∞) or the number buttons to enter the new password.

3 When the new password has been entered, press ENTER.

The new password is set and the screen returns to the General menu screen. To go back to the General menu screen without making any changes, press RETURN.

Setting the Country Code

Change your Country Code whenever you feel it is necessary.

However, if you forget your existing password, you cannot enter this screen to change it.

1 Select [Country Code] in the [Parental Lock] setting and press ENTER.

The screen changes to the password input screen. To enter the password, refer to ‘Entering the Password’ on the previous page.

The Country Code selection screen appear.

Audio Video1 V2

Country Code

List of Codes

Language General

Code (0~2) us

2 1 1 9

Setup Country Code

+/–

Move

ENTER

Select

RETURN

SETUP

Return

Exit

2 Use the cursor buttons (

2/3) to select either “List of

Codes” or “Code”.

3 If you select “List of Codes”, use the cursor buttons (

5/∞) to select the country.

For country codes which are only shown as a code, please refer to ‘Country Code List’ on page 53.

List of Codes us

If you select “Code”, use the cursor buttons (

5/∞) to input the numbers of the input code.

Use the cursor buttons (

2/3) to change the position of the cursor. You can also use the number buttons to enter the code.

Code (0~2)

2 1 1 9

4 Press ENTER to set the new Country Code.

To exit the screen without making any changes, press RETURN.

SN 29343149 DV-L5E

Country Code List

Country

ARGENTINA

AUSTRALIA

AUSTRIA

BELGIUM

BRAZIL

CANADA

CHILE

CHINA

DENMARK

FINLAND

FRANCE

GERMANY

HONG KONG

INDIA

INDONESIA

ITALY

JAPAN

KOREA, REPUBLIC OF

MALAYSIA

MEXICO

NETHERLANDS

NEW ZEALAND

NORWAY

PAKISTAN

PHILIPPINES

PORTUGAL

RUSSIAN FEDERATION

SINGAPORE

SPAIN

SWEDEN

SWITZERLAND

TAIWAN, PROVINCE

OF CHINA

THAILAND

UNITED KINGDOM

UNITED STATES OF

AMERICA

Input-code Country-code

1608

1620

1821

1907

0519

1905

0308

2023

1016

1118

1325

1324

1412

1426

1415

1611

0411

0609

0618

0405

0811

0914

0904

0920

0118

0121

0120

0205

0218

0301

0312

0314 es se ch tw ph pt ru sg nl nz no pk jp kr my mx hk in id it dk fi fr de br ca cl cn ar au at be

2008

0702

2119 th gb us

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

SN 29343149 DV-L5E

53

Adjusting Audio and Video Settings

2/3/5/

ON

TV

ON / STANDBY

STANDBY

ANGLE AUDIO

OPEN / CLOSE

SUBTITLE

LAST M COND. M DIMMER DISPLAY

TOP MENU MENU

CH -

VOL +

ENTER

VOL -

CH +

RETURN SETUP

TV/ VCR

PAUSE STOP

FR FF

PLAY

DOWN UP

1 2 3

STEP/ SLOW

+

4

7

5

8

+10 0

RANDOM REPEAT

6

-

FUNCTION M

9

SEARCH CLEAR

A-B PROGRAM

REMOTE CONTROLLER RC449 DV

DVD TV

ENTER

SETUP

FUNCTION M

Memorizing settings (Function

Memory)

Up to 5 settings can be memorized.

1

SETUP

Press SETUP.

The Setup screen appears.

2

Use the cursor buttons (

2/3) to

select the menu you want.

3

4

FUNCTION M

Use the cursor buttons (

5/) to

select the setting to be memorized.

As each menu is selected with the cursor, the settings appear below the menu heading.

Press FUNCTION M.

“FM” will appear on the screen, and the setting will be memorized.

To clear the Function Memory

Press FUNCTION M. again

Note

Some settings cannot be memorized.

Recalling memorized settings

1

FUNCTION M

2

3

ENTER

Press FUNCTION M.

Only memorized settings are displayed.

Use the cursor buttons (

5/) to

select the menu to be recalled.

Press ENTER.

Resetting the Player to System Settings

To reset the player, press and hold

7 on the front panel

when pressing STANDBY/ON to turn the unit from standby to on .

All program memory, saved settings from functions such as

Video Memory, Last Memory and Condition Memory are cleared, TV System is reset to AUTO and all Setup screen menus are returned to factory settings.

SN 29343149 DV-L5E

Pre-programming remote controller

ON

STANDBY

VOL +/–

CH +/–

Number buttons

DVD/TV

ON

TV

ON / STANDBY

STANDBY

ANGLE AUDIO

OPEN / CLOSE

SUBTITLE

LAST M COND. M DIMMER DISPLAY

TOP MENU MENU

CH -

RETURN

TV/ VCR

PAUSE STOP

VOL +

ENTER

VOL -

FR FF

CH +

SETUP

PLAY

DOWN UP

1 2 3

STEP/ SLOW

+

4

7

5

8

+10 0

RANDOM REPEAT

6

-

FUNCTION M

9

SEARCH CLEAR

A-B PROGRAM

REMOTE CONTROLLER RC449 DV

DVD TV

ENTER

Learning a pre-programming code

You can make RC-449DV remote controller to operate a TV from other brand than Onkyo by storing the pre-programming code of the brand in the RC-449DV.

1

DVD TV

Set the DVD/TV switch to TV.

Controlling a TV

1

DVD TV

2

3

4

STANDBY

Find the 2-digit number for the brand name of the component that you want to operate in the table on page 56.

Turn on the TV that you want to operate.

While holding down the STANDBY button on the RC-449DV that you want to program, press the ENTER button, and then release both buttons.

ENTER

2

ON

3

Set the DVD/TV switch to TV.

Press the ON button to turn on the device.

Press the desired operation button.

CH+ : Changes the TV channel upward.

CH– : Changes the TV channel downward.

TV VOL+ : Increases the TV volume.

TV VOL– : Decrease the TV volume.

TV/VCR : Switches the TV/VCR inputs.

5

1

4

7

+10

8

0

2

5

3

6

9

Within 30 seconds, enter the 2-digit code number.

6

Press some operation buttons for the component that you want to operate to check if the system operates properly.

If the system operates properly, the code is correct. If the component does not operate properly, return to step 3.

Notes

• With some brand’s components, some buttons may not work correctly.

• If more than one code is given in the table, try the code one by one until you reach the code for your component (i.e. if the first code does not work, then try the next).

• The code can be retained by changing the batteries within 1 minute. If the code is lost, store the pre-programming code again.

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

55

SN 29343149 DV-L5E

Pre-programming remote controller

Pre-programming Code List

Brand

KTV

LXI

MAGNAVOX

MITSUBISHI

NEC

PANASONIC

PHILCO

PHILIPS

PIONEER

PORTLAND

PROSCAN

QUASAR

RADIO SHACK

RCA

SAMSUNG

SANYO

ADMIRAL

AOC

BELL & HOWELL

BROKSONIC

CRAIG

CROSLEX

CURTIS MATHIS

DAEWOO

DAYTRON

EMERSON

FISHER

GE

GOLDSTAR

HITACHI

JC PENNEY

JVC

SCOTT

SHARP

SIGNATURE 2000

SONY

SYLVANIA

SYMPHONIC

TOSHIBA

VIDTECH

WARDS

YAMAHA

ZENITH

Code

04, 08

02, 13, 14

01, 02

30

04, 09

08

02, 10

04, 20

04, 13, 14

02, 23

01, 31

01-03

04

01, 02

04

05-08

09

04, 08, 10

04, 11, 12

13

04-08, 13, 14

15

03, 04, 16-18

04, 13, 19

04, 13, 20, 21

03, 04, 17, 19

22

04, 08, 13

03, 09, 10, 15

04, 09, 13

04, 23

04

16-18, 24

04, 09, 13

09

10, 18, 25

04, 26

03

17, 18

03, 04, 08, 23

03, 04, 17, 26-28

04, 13, 29

15

SN 29343149 DV-L5E

Others

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service. Refer also to the respective instruction manuals of the connected components and TV.

Symptoms

The DVD Player doesn’t switch on.

Causes

• The mains lead is disconnected.

Remedies

• Check the connection of the mains lead.

Pages

15

The disc tray comes back out automatically, shortly after the disc tray is closed.

The DVD Player does not start playback.

The playback picture is occasionally distorted.

Brightness is unstable or noise is visible on the playback picture.

The picture from the DVD

Player doesn’t appear on the TV screen.

Settings are canceled.

Playback doesn’t follow the course of the disc’s programs.

The buttons on the remote controller and DVD Player do not operate.

mark appears on screen.

mark appears on screen.

When making changes in the Setup screen menus,

is displayed.

Some settings in the Setup

Menu do not appear.

• The main power is set to OFF.

• There is external noise in the computer circuits of the DVD Player.

• The AC fuse is blown.

• The disc is not placed properly on the disc tray.

• The disc is dirty or warped.

• Region number does not conform with this unit.

• Turn on the main power.

• Switch off the main power, then switch it on again. If not recovered, disconnect the mains lead, then connect it again.

• Contact your nearest ONKYO service center.

• Use the disc tray guide to align the disc.

• No disc is inserted.

• An unplayable disc is inserted.

• The disc is placed upside down.

• The disc is not placed within the disc tray guide.

• The disc is dirty.

• The parental lock function is activated.

• The disc is dirty.

• It is in fast forward or fast reverse playback.

• Copy protection is activated.

• Refer to ‘Notes on Discs’.

• If the region number on the disc does not match the number on the player, the disc cannot be used

• Insert a disc. (Check that “DVD,” “VCD,” or “CD” is lit in the DVD Player’s display.)

• Check the playable discs.

• Place the disc with the playback side down.

• Place the disc within the proper guide on the disc tray.

• Eject the disc and clean it.

• Deactivate the parental lock function or change the parental lock level.

• Eject the disc and clean it.

• Sometimes a small amount of picture distortion may appear. This is not a malfunction.

• Connect the DVD Player directly to the

TV. Avoid connecting the DVD Player to the TV through a VCR.

• Set the TV to the DVD Player’s input.

• The TV is not set to receive the output signals from the DVD Player.

• The DVD Player is not properly connected.

• When the power is turned off by power failure or by unplugging the power cord, settings will be canceled.

• The DVD Player is in repeat playback mode, memory playback mode, or random playback mode, etc.

• Power supply fluctuations or other abnormalities such as static electricity may interrupt correct operation.

• The selected function does not operate for that disc.

• The operation is prohibited by the player.

• There is a Video CD, CD or MP3 loaded in the player and the setting that was changed only applies to DVD performance.

• The [Setup Menu Mode] is set to [Basic].

• Check the connections to the DVD Player.

• Before unplugging the power cord, press

STANDBY/ON and check that “--OFF--” disappears in the display.

• Resume normal playback.

• Switch off the main power, then switch it on again. If not recovered, disconnect the mains lead, then connect it again.

• The setting will be effective the next time a DVD is loaded.

Set the [Setup Menu Mode] to [Expert].

15

19

5

4

19

5

19

19

6

51-53

6

13

13

26-31

15

39

39

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

SN 29343149 DV-L5E

57

Troubleshooting

Symptoms

No sound is reproduced.

The screen is stretched or aspect does not change.

The disc containing the

MP3 tracks won’t play.

Some MP3 tracks appear to be missing from a disc.

The buttons on the DVD

Player operates but the buttons on the remote controller do not operate.

Causes

• The Setup screen Audio menu [96 kHz

PCM Out] setting is set to [96 kHz].

• The multi aspect setting is not appropriate.

• The TV is connected with an S-video cord.

• The disc is not ISO 9660 compatible.

• Files are not MPEG1 Audio Layer 3 format, 44.1 or 48 kHz, fixed bit-rate.

• The track name does not end in “.mp3” or

“.MP3”.

Remedies

• Either connect using the analog outputs, or set [96kHz PCM Out] in the Audio menu to [96kHz

3 48 kHz].

• Set [Digital Out] to [On].

• The Setup screen Audio menu [Digital

Out] is set to [Off].

• A wrong sound signal conversion method is selected.

• The pause mode is engaged.

• The volume level of TV or amplifier is set to minimum.

• The DVD or CD is recorded in DTS audio.

• Check the current sound signal conversion method, and select the right setting.

• Press

3 or 8 to exit the pause mode.

• Increase the volume level.

• DTS audio is only output from the digital output jacks. Connect the digital output on the player to the digital input on a receiver or amplifier with a built in DTS decoder to hear DTS audio.

• Change the aspect setting in the [TV

Screen] setting in the Setup screen Video

1 menu to the screen type most appropriate to the TV or monitor you are using.

• If you connected your TV with an S-Video cord, in rare cases the TV picture may appear stretched. In this case switch the output from [S2] to [S1]

• Check the disc.

• Check the file format.

• More than 251 folders and tracks are recorded on a disc.

• A multi-session disc is inserted.

• This system will not recognize file that does not end in ".mp3" or ".MP3" as an

MP3 track. Change the track name.

• This player only recognizes the first 250 folders and tracks on a disc. If there are more folders/tracks than this, you will not be able to play them.

• This player is not compatible with multisession discs. If the disc is multi-session, you will only be able to play tracks recorded onto the first session.

• Insert new batteries.

• No batteries are inserted in the remote controller.

• The batteries are worn out.

• The remote controller is not pointed at the remote sensor of the DVD Player.

• The remote controller is too far from the

DVD Player

• Replace with new batteries.

• Point the remote controller at the remote sensor of the DVD Player.

• Operate the remote controller within 5 m

Pages

41

41

40, 41

23

14

42

43

5

5

5

5

5

9

9

9

9

Because the unit contains a microcomputer to provide advanced functions, it may malfunction due to external noise or static electricity. If this happens, press the POWER switch on the unit and then press it again after about five seconds.

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

58

SN 29343149 DV-L5E

Specifications

DVD Player

Power supply

Power consumption

Weight

External dimensions

Signal system

Regional restriction code

Laser

Frequency range (digital audio)

Signal-to-noise ratio (digital audio)

Audio dynamic range (digital audio)

Harmonic distortion (digital audio)

Wow and flutter

Operating conditions

USA and Canadian models: AC 120 V, 60 Hz

Other models: AC 100–240 V, 50/60 Hz

USA and Canadian models: 13 W

Other models: 12 W

3.7 kg, 8.2 lbs.

USA and Canadian models: 435

× 81 × 353.5 mm (W/H/D), 17-1/8" × 3-3/16" × 13-15/16"

Chinese models: 435

× 81 × 361 mm (W/H/D)

Other models: 435

× 81 × 359 mm (W/H/D)

USA and Canadian models: NTSC

Other models: PAL/3.58/NTSC

USA and Canadian area:

South-east Asian area:

Australian and South American area: 4

PRC: 6

1

3

Semiconductor laser, wavelength 650 nm

DVD linear sound: 48 kHz sampling 4 Hz to 22 kHz

96 kHz sampling 4 Hz to 44 kHz

Audio CD: 4 Hz to 20 kHz

More than 100 dB

More than 96 dB

Less than 0.015 %

Below measurable level (less than ±0.001 % (W.PEAK))

Temperature: 5

°C to 35°C (41°F to 95°F), Operation status: Horizontal

Outputs

Video output

S-video output

Component video output

Audio output (digital output Optical)

Audio output (digital output Coaxial)

Audio output (2-Channel Audio)

1.0 V (p-p), 75

Ω, negative sync., pin jack × 1

(Y) 1.0 V (p-p), 75

Ω, negative sync., Mini DIN 4-pin × 1

(C) 0.286 V (p-p), 75

(Y) 1.0 V (p-p), 75

Ω, negative sync., pin jack × 1

(P

B

)/(P

R

) 0.7 V (p-p), 75

Ω, pin jack × 2

–22.5 dBm

× 1

0.5 V (p-p), 75

Ω, pin jack × 1

2.0 V (rms), 470

Ω, pin jack (L, R, MONO) × 1

Specifications and features are subject to change without notice.

Downloaded From DvDPlayer-Manual.com Onkyo Manuals

SN 29343149 DV-L5E

59

Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN

Tel: 072-831-8111 Fax: 072-833-5222

http://www.onkyo-intl.com

ONKYO U.S.A. CORPORATION

18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.

Tel: 201-785-2600 Fax: 201-785-2650 http://www.onkyousa.com

ONKYO EUROPE ELECTRONICS GmbH

Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY

Tel:

+49-8142-4401-0 Fax: +49-8142-4401-555 http://www.onkyo.net

ONKYO CHINA LIMITED

Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung,

N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039

http://www.onkyochina.com

HOMEPAGE

http://www.onkyo.co.jp/

W0107-1

E

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project