Brother HL-1650/1670N Setup guide

Add to my manuals
2 Pages

advertisement

Brother HL-1650/1670N Setup guide | Manualzz

Laser Printer HL-1650/1670N

Quick Setup Guide

Read the "Safety Sheet" first to ensure that you use this printer safety.

Read this "Quick Setup Guide" before you set up the printer.

Before you can use the printer, you must set up the hardware and install the driver.

Identify the operating system on your computer (Windows ® 95 / 98 / Me, Windows NT ® 4.0,

Windows ® 2000 or Macintosh ® ).

The interface cable is not a standard accessory. Some computers have both a USB and a parallel port. Please purchase the appropriate interface cable for the interface you intend to use (parallel, USB or Network).

Follow the instructions in this guide for your operating system and interface.

Carton components

Carton components may differ from one country to another.

Save all packing materials and the printer carton. They should be used when shipping the printer.

CD-ROM Documents Printer

For all users

Step 1 Insert the CD-ROM into the CD-ROM drive

For Windows ® users only For Macintosh ® users only

1 Insert the CD-ROM into the CD-ROM drive.

The opening screen will appear automatically.

2 Select the language you want.

1 Insert the CD-ROM into the CD-ROM drive.

Drum unit assembly

(with toner cartridge included)

AC power cord

3 Click the Initial Setup icon. 4 You can view the Initial Setup instructions.

Step 2 Install the drum unit assembly

Front cover

Cover release button

3 Select the language you want.

2 Double-click the Initial Setup icon.

4 You can view the Initial Setup instructions.

What is included on the CD-ROM

You can get a variety of information from this CD-ROM.

LJ5025001 Printed in China

Windows ®

Macintosh ®

Initial setup

See the complete setup process from hardware setup to driver installation on a movie.

We recommend that you follow these instructions when you first setup the printer.

Install Software (only for

Windows ® )

You can install not only the printer driver but also the following utility items.

For all users

-Printer Driver

-Automatic E-mail Printing

For administrators

-BRAdmin Professional

-Network Printer Driver Wizard

-Network Print Software

-Storage Manager

Printer Driver Installer (only for Macintosh ® with USB)

BR-Script PPD Installer (only for Macintosh ® with Network)

Manual

View the Printer User's Guide,

Network User's Guide and other documentation.

Brother Solutions Center

Introduction to the Brother user support web page.

You can easily access it and receive the latest drivers and information for this printer.

Maintenance Tutorial

See the maintenance videos for this printer.

We recommend that you view the videos before getting started.

Make Disk Sets (only for

Windows ® )

©2000 Brother Industries, Ltd.

Windows ® and Windows NT ® are registered trademarks of Microsoft Corporation in the U.S. and other countries.

Macintosh ® and iMac ® are registered trademarks of Apple Computer, Inc.

All other brand and product names are trademarks or registered trademarks of their respective holders.

1 Press the cover release button, and then open the front cover.

2 Remove the protective part.

3 Unpack the drum unit assembly.

Rock it from side to side 5 or 6 times to distribute the toner evenly inside the assembly.

4 Install the drum unit assembly into the printer.

Step 3 Load paper into the paper cassette

Paper guide release lever

Universal guide release lever

Up to here

5 Close the front cover.

Paper cassette

1 Pull the paper cassette completely out of the printer.

2 While pressing the paper guide release lever, slide the adjusters to fit the paper size. Check that they fit correctly into the slots.

Note: For Legal or 8.5 x 13 in. paper, press the universal guide release lever as you extend the rear of the paper cassette.

3 Load paper into the paper cassette.

Check that the paper is flat in the tray and below the maximum paper mark.

4 Re-install the paper cassette into the printer.

Step 4 Print a test page

Extend the tray extension flap

O I

O I

READY

Data

Back

Reprint

Job cancel

Set

Go

PRINTING

Data

Back

Reprint

Job cancel

Set

Go

OFF ON

OFF ON

1 Make sure the printer power switch is off.

Connect the AC power cord to the printer.

Do not connect the interface cable.

2

Plug the AC power cord into an AC outlet.

Turn the power switch on.

3

After the printer has finished warming up, the READY message appears.

4 Press the Go switch. The printer prints a test page.

Check that the test page is printed correctly.

Note: When you want to set the control panel message language, refer to the control panel section on the reverse side of this sheet.

Continue to the reverse side.

Follow the instructions for your interface cable and operating system.

For

Parallel

interface cable users (For

Windows

® users only)

Step 5 Connect the printer to your PC & Install the printer driver

O I

OFF ON

3 Turn the printer power switch off. 1 Click "Connect the interface cable and install the printer driver / utilities".

2 Select the parallel interface cable.

4 Connect the interface cable to your PC, and then connect it to the printer.

O I

OFF ON

5 Turn the printer power switch on.

Note: If "Add New Hardware Wizard" appears, click the Cancel button.

6 Click the Next button.

7 Click the Finish button.

The setup is now complete.

For

USB

interface cable users (For

Windows

®

users only)

Step 5 Install the driver & Connect the printer to your PC

For

USB

interface cable users (For

Macintosh

®

users only)

Step 5 Install the Driver & Connect the Printer to your Macintosh

®

1 Double-click the Printer Driver Installer icon, and then follow the instructions on the screen.

O I

OFF ON

2 Make sure the printer power switch is on.

Note: When the "Add New Hardware

Wizard" appears on your PC, click the

Cancel button.

Note: Start installing the driver before you connect the USB interface cable to the printer. If you have already connected it, remove it.

1 Click "Connect the interface cable and install the printer driver / utilities".

O I

4 Click the OK button.

OFF ON

5 Make sure the printer power switch is on.

2 Select the USB cable.

6

3 Click the Next button.

Connect the USB interface cable to your PC, and then connect it to the printer.

For Windows

®

98/Me users: The setup is now complete.

For Windows

®

2000 users: Go to Step 6.

Step 6 Setting your PC printer port

(For Windows ® 2000 users only)

1 After your PC has restarted, click Start,

Setting and Printers.

2 Select the Brother HL-1650/1670N series (copy2) icon.

3 Click on the File menu, and then select Set as Default printer.

The setup is now complete.

For

Network

users

If you want to connect your printer using a Network cable, refer to the Quick Network Setup Guide.

After the administrator has made the required settings, install the driver referring to the "Installing the

Driver for Network users" section of the Quick Network Setup Guide.

For HL-1650 user: Install the optional Network board (NC-4100h) referring to Chapter 4 of the printer.

3 Connect the USB interface cable to your Macintosh

®

, and then connect it to the printer.

4 Open the Chooser from the Apple

®

menu on the

Macintosh

®

.

5 Click the HL-1650/1670N icon and select it.

The setup is now complete.

Control Panel

Data

Back

For more information, see Chapter

3 "CONTROL PANEL" in the User's

Guide.

Reprint

Job cancel

Set

Go

Data LED : Orange

On Data remains in the printer buffer.

Blinking Receiving or processing data.

Off No remaining data.

Switches

Go

Job Cancel

Reprint

Menu

Set

Back

Exit from the control panel menu, reprint settings and clear error messages.

Pause / Continue printing.

Stop and cancel the printer operation in progress.

Select the reprint menu.

Move forward and backward through menus.

Move forward and backward through selectable options.

Select the control panel menu.

Set the selected menus and the settings.

Go back one level in the menu structure.

Language Setting (Default setting is English)

1. Select the SETUP mode by pressing the

+

switch, and press the Set switch.

2. Check that the LANGUAGE message appears, and press the Set switch.

3. Choose your language by pressing the

+

or

-

switch, and press the Set switch. An asterisk mark (

*

) appears at the end of the display.

(You can return to the READY status by pressing the Go switch.)

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Laser
  • Printing colours: Black
  • A4 16 ppm
  • Duplex printing
  • LCD Built-in display
  • Total number of input trays: 1 Total input capacity: 250 sheets Total output capacity: 150 sheets
  • Internal memory: 8 MB 100 MHz

Related manuals

Download PDF

advertisement