Falco Street Furniture

Falco Street Furniture
A stylish range
of Street Furniture
Falco’s range of street furniture is a comprehensive collection
of high quality products for every environment. From stylish
co-ordinated ranges of street furniture to simple picnic seats, the
range is here to give architects, designers and specifiers inspiration
and choice.
The range covers; seating, litter bins, bollards, planters, barriers,
tree protection – the whole range of street furniture requirements.
The design led aspect of Falco street furniture enables it to
accentuate a scheme - from parks and recreation areas to urban
street scenes or from rural and marine locations to museums and
tourist sites.
If it’s materials you are focussed on then we have plenty to
offer – from FSC hardwood, stainless steel and cast iron through
to granite, aggregate or simple galvanised steel – you can find a
material or texture to link into almost any design concept. Plus
with a choice of 192 colours from the RAL register for many
products, matching schemes or corporate identities is
straightforward.
Design led products for
external environments
12
Falco Barnfield Close, Barnfield Ind. Estate, Leek Staffordshire ST13 5EG
T 01538 380080 F 01538 386421 E [email protected] W www.falco.co.uk
Falco street furniture is designed to be robust and vandal resistant - and with little need for maintenance, the products provide a very low cost of
ownership for many years.
We can also provide site surveys, CAD layouts and schematics, plus all product technical data sheets are available in PDF format to make
specifying easier.
Additionally there are whole chapters in the brochure dedicated to cycle parking and shelters, canopies and walkways, plus some striking centre
pieces to punctuate a square or piazza in the ‘Science Park’ range of play equipment ... and as always with Falco, if you’re not sure give us a call,
we understand the design process and we’re sure we can help.
QUESTIONS?
QUESTIONS?
Falco Barnfield Close, Barnfield Ind. Estate, Leek Staffordshire ST13 5EG
T 01538 380080 F 01538 386421 E [email protected] W www.falco.co.uk
13
S T R E E T F U R N I T U R E : FA L C O L I N E A
1
1
2
1
FA LC O L I N E A S E AT I N G
1
FA LC O L I N E A
Part code
Description
This bench with its innovative modern design, coupled with urban
31.522.121
FalcoLinea single sided bench with 2 supports,
robust looks, is available with and without backrests. Constructed
96.091.357
length 2071 mm
from FSC certified wooden slats with steel plate frame and supports,
concrete foot of 595x300x300 mm with
it’s aesthetics make it appealing to any urban environment.
embedded anchor rail
31.524.121
96.092.020
FalcoLinea single sided seat with 2 supports,
All steel plate is hot dipped galvanised, and can be polyester powder
length 1950 mm
coated in a choice of 192 standard RAL colours.
concrete foot dim. 600x300x200 mm with 2
The FalcoLinea’s base plate makes for ease of surface or below
stainless steel coach screws 8x60 mm,
ground fixing.
2 stainless steel rings M8 and 2 plugs M10
2
2
FA LC O L I N E A C H A I R
FA LC O L I N E A C H A I R
Part code
Description
The FalcoLinea chair has all the attributes of the bench, but enables
31.520.021
FalcoLinea chair with floorplate on MF, FSC wood
optimal flexibility in the use of the range.
96.092.020
concrete foot dim. 600x300x200 mm with 2
All parts are beautifully rounded to maintain great ergonomic, and
yet the range has a high degree of vandal resistance.
stainless steel coach screws 8x60 mm,
2 stainless steel rings M8 and 2 plugs M10
FA LC O L I N E A C O O R D I N AT E D P R O D U C T S
Litter bins page no. 84.
FalcoLinea bench, Part code 31.522.121
FalcoLinea chair, Part code 31.520.021
546
546
1805
14
450
470
150
200
861
2072
666
343
F LO W
F LO W
The Flow is one of Falco’s many wood based ranges and is notable
Part code
Description
for its distinctive sinuous and sculptured form. Based on a slatted
37.900.002*
single-sided, with back, 2000x1160x1310 mm
design, the Flow product range allows great flexibility for schemes
37.903.002*
single-sided, without back, 2000x710x430 mm
requiring natural hardwood materials and non-linear seating
37.906.002*
double-sided, without back, 2000x1160x430 mm
arrangements.
You can choose from 11 standard colours:
RAL 1007, daffodil yellow
RAL 3000, fire red
Flow provides unlimited option in terms of the length of the seating
RAL 3005, wine red
RAL 4004, violet bordeaux
run and the design line it creates. Its plasticity enables designers to
RAL 5013, cobalt blue
RAL 6009, pine green
RAL 6005, moss green
RAL 6029, mint green
RAL 7016, anthracite grey
RAL 9005, deep black
Falco street furniture products and can be used to create a perfectly
RAL 9007, grey aluminium
natural outdoor environment.
The Flow is available as a single or double sided bench or as a single
sided seat with a backrest. Manufactured from 40x40mm hardwood
slats with three supports every 2m for a linear run – the supports
can be powder coated. Seat is priced per metre, with a minimum
requirement of 2 metres.
Flow, Part code 37.900.002
1160
433
1310
1249
2000
S T R E E T F U R N I T U R E : F L O W S E AT
create flowing contours and curves, and seating which traces a path
around other objects. The Flow co-ordinates with a number of other
875
875
15
S T R E E T F U R N I T U R E : T R I A N G L E S E AT I N G
As a result, the aesthetics of the FalcoTriangle range are well suited
T R I A N G L E S E AT I N G
Part code
Description
to both modern urban locations or traditional rural settings,
34.515.011
seat with back, concrete supports
providing the architect with a very versatile range of products with
34.517.011
bench without back, concrete supports
which to create a distinctive outdoor environment.
34.516.011
seat with back, black supports
34.518.011
bench without back, black supports
T R I A N G L E S E AT I N G
The Triangle bench is a combination of strong and solid aggregate
uprights, maintenance free FSC hardwood slats and galvanised steel
TRIANGLE STREET FURNITURE
support brackets.
The Triangle range of products from Falco is a co-ordinated range
of street furniture characterised by its fresh eye catching design,
its functionality and its durability. The range consists of; shelters,
canopies, benches and seating, litter bins, bollards and cycle parking
systems.
The upright mounts can be manufactured in either a black polished
finish or in matt concrete. The seat and optional backrest are
manufactured from FSC hardwood. The remaining support and
fixing brackets are manufactured from hot dip galvanised steel
which can be additionally powder coated to complement the design
The range also benefits from the versatility of the material options
scheme.
available: a range of aggregates can be used to create either light
cream supports or heavier appearance darker mounts to contrast
with the hardwood slats. Similarly, the range can be made in either
stainless steel or powder coated in any of the 192 RAL colours.
The side uprights are supplied as standard with an extra 300mm to
aid below ground fixing. For surface fixing, this can be removed, and
we must be notified at time of ordering.
Triangle bench,
Part code 34.517.017 / 34.518.017
Triangle seat,
Part code 34.515.017 / 34.516.017
440
1500
1630
16
600
300
300
450
450
816
440
1500
1630
600
T R I A N G L E , S TA I N L E S S S T E E L
T R I A N G L E S TA I N L E S S S T E E L
The Triangle seat is an attractive bench and can be enhanced using
Part code
Description
stainless steel. A combination of strong solid bonded aggregate/
34.510.017
Triangle seat, with concrete supports
concrete, maintenance free stainless steel and galvanised steel
34.512.017
Triangle bench, with concrete supports
ave attractive pierced
support brackets. The seat and backrest have
34.511.017
Triangle seat, with natural stone supports
slits to enhance the bench’s appearance and are gently curved for
34.513.017
Triangle bench, with natural stone supports
comfort.
The other parts of the supporting structure are manufactured
man
from
galvanised steel which can be powder coated in any of the 192 RAL
T R I A N G L E C O O R D I N AT E D P R O D U C T S
The seats are mounted between the concrete elements using
Litter bins page no. 85.
special Falco caps. This is the final touch for a very attractive
Bollards page no. 118.
product. The concrete supports include an 300x600 mm element for
Shelters page no. 222 and 223.
in-ground installation.
Cycle parking page no. 168, 176, 177 and 178.
There are optional side supports in natural stone, in black granite.
Triangle bench,
Part code 34.512.017 / 34.513.017
Triangle seat,
Part code 34.510.017 / 34.511.017
1500
478
260
440
300
300
450
450
750
440
1530
1600
600
1530
1600
600
S T R E E T F U R N I T U R E : T R I A N G L E S E AT I N G
colours to complement the design scheme.
17
S T R E E T F U R N I T U R E : S C H WA B I N G A N D WA S S E R B U R G
2
1
1
The steel plates are hot dip galvanised to BS EN ISO 1461 and can
SC H WA B I N G
Part code
Description
be polyester powder coated in a choice of 192 standard RAL colours,
30.365.800
Schwabing bench with untreated Kambala Timber
with special colours available on request. The bench is available with
30.366.800
Schwabing bench with treated wooden slats
either Kambala or impregnated wooden slats. Designed for either
2
self supporting or below ground fix.
WA S S E R B U R G
Part code
Description
30.381.800
Wasserburg seat with back in untreated Kambala
30.382.800
Wasserburg seat with back in treated wooden slats
Design: Bartsch Design.
Timber
2
WA S S E R B U R G
The Wasserburg is another new seat design with stunning curves
and a rolling feel. An uncomplicated design engineered with steel
arcs to create a ripple effect using wooden slats. The seat is
manufactured using rolled steel plates for the legs and back supports
1
S C H WA B I N G
The Schwabing seat is an elegant new design from Falco with
and contoured hard wood slats for the seating area.
exceptional form. As usual, a simple design is often the most
The steel support elements are hot dip galvanised to BS EN ISO
evocative and the new Schwabing bench has a timeless look.
1461 and can be polyester powder coated in a choice of 192
The combination of robust steel plates and chunky wooden slats
standard RAL colours, with special colours available on request.
united in a light and effortless arrangement gives the bench a great
The seat is available with either Kambala or impregnated wooden
sculptural feel.
slats. Design for below ground fix.
Schwabing, Part code 30.365.800 / 30.366.800
Wasserburg, Part code 30.381.800 / 30.382.800
360
2000
1280
550
400
100
18
460
800
350
450
450
860
860
420
1
1
GERA BENCH
GER A BENCH
The Gera seats are another design led seating solution creating an
Part code
eye catching line. The design evokes an abstract flower form, by
30.325.800
Description
Gera bench with untreated Kambala parts, steel.
Powdercoated in Ral 7016, anthracite grey
using a very simple set of curves slightly offset to produce the
feeling of flower stems and the result is a seat which certainly invites
2
people to sit and rest.
Part code
Description
The seats are delivered in a standard colour of anthracite grey,
30.315.800
Gera chair with untreated Kambala sit parts
comparable to RAL 7016, though other colours are available on
3
request. The wooden slats are untreated Kambala as standard, but
Part code
Description
30.305.800
Gera leaning stool with untreated Kambala sit
again these can be ordered treated if required. The standard design
G E R A S TO O L
G E R A L E A N I N G S TO O L
parts
Andy Rayer. Total height 800 mm (lengthened side supports), height
above ground level 450 mm, 350 under ground level. Length 1320
mm, depth 450 mm.
2
GER A STOOL
The difference between the Gera bench and the Gera stool is the
3
GER A LEANING STOOL
This is an original variant of the Gera stool. The side supports have
width of 390 mm.
been stretched upward and sloped to create an Art Nouveau style
Design by Andy Rayer. Height 450 mm and depth 450 mm.
line rising up from the ground. Design by Andy Rayer.
bench, Part code 30.325.800
seat, Part code 30.315.800
leaning seat, Part code 30.315.000
360
STREET FURNITURE: GERA
is for a bolt down option using the metal base plates. Designed by
450
450
740
800
450
660
450
1
2
2
3
19
2
STREET FURNITURE: SINDELFINGEN AND HOCKENHEIM
1
1
The wooden parts of the seat are available as standard in untreated
SINDELFINGEN
Part code
Description
Kambala wood or optionally we can supply the wood impregnated.
30.371.000
Sindelfingen bench with untreated Kambala
Additionally using ‘thermo wood’ we have a further option.
30.372.000
Sindelfingen bench with thermic treated
Height 445mm, depth 380mm, length 1,805mm, designed for
wooden seat parts
below ground fix into a 1,000x800x500mm footing.
seat parts
2
HOCKENHEIM
Part code
Description
30.335.800
Hockenheim bench with untreated wooden
2
H O C K E N H E I M S E AT
The Hockenheim seat is a robust design with great character, able
Kambala seat-and backparts, steelparts
to make a real statement in an urban environment. The contrast
powdercoated in RAL 9006
30.336.800
between the tubular supports and the square slats linked by a ‘V’
Hockenheim bench treated wooden seat-
shaped support creates an incongruous juxtaposition of lines.
and backparts, steel parts powdercoated
in RAL 9006
Manufactured from steel and hardwood, the wooden slats of the
seat are available as standard in untreated Kambala wood or
optionally we can supply the wood impregnated.
1
SINDELFINGEN BENCH
A European style bench which brings a continental flavour to the
Additionally using ‘thermo wood’ we have a further option.
Falco portfolio. The Sindelfingen is an extraordinarily beautiful
The steelwork is galvanised and is delivered powder coated as
design imitating a ‘floating seat’, anchored only at one end.
standard in white aluminium, comparable to RAL 9006.
As a result the bench has a unique lightness about it whilst making
a sturdy statement. The bench is manufactured using robust welded
Designed G Kölz.
flat steel bar with 55mm wide wooden slats.
Height 790mm, length 2,000mm, depth 460mm, sit height 490mm.
Sindelfingen, Part code 30.371.000 / 30.372.000
Hockenheim, Part code 30.335.800 / 30.336.800
1805
460
1000
20
800
490
500
500
790
445
445
380
1
FA LC O W I N G
FA LC O W I N G I
Falco has designed two benches based on a symmetrical theme
Part code
creating a ‘wing-like’ effect. For indoor or outdoor use, both designs
31.060.121
Description
double bench FalcoWing I with FSC hardwood,
1 middle support with base plate at ground level,
are robust products and utilise with FSC hardwood slats supported
bench length 1950 mm, large 400 mm,
by steelwork. Both seats are 1,950mm long.
height 470 mm
FA LC O W I N G I
The FalcoWing I design is a squared off version manufactured from
31.060.700
10mm hot dip galvanised steel plate as a central supporting post.
96.091.357
The support also creates a central divide in the seat. Width 400mm,
2
sit height 469mm.
Part code
1
concrete foot 595x300x300 mm
FA LC O W I N G I I
FA LC O W I N G I I
Description
double bench FalcoWing II with FSC hardwood,
1 round middle support with base plate
The FalcoWing II design is a rounded version with a 220mm
300x300 mm at ground level, bench length
diameter central support with welded tubes either side to support
1950 mm, large 400 mm, height 450 mm
the wooden bench slats. This version creates a continuous bench
31.065.700
without interruption. Width 400mm, sit height 450mm.
additional charge for powercoating steel parts
in RAL
96.400.200
The mark of responsible forestry.
concrete foot 300x500x500 mm
CU-COC-008530
©1996 Forest Stewardship Council
FalcoWing I, Part code 31.060.121
FalcoWing II, Part code 31.065.121
1950
40
40
400
120 20
400
120
1950
S T R E E T F U R N I T U R E : FA L C O W I N G
31.065.121
2
additional charge for powercoating steel parts
in RAL
450
469
Ø76
Ø219
500
420
300
1
2
21
STREET FURNITURE: CIMA SERIES
1
2
1
CIMA BENCH
Part code
Description
CIMA
The Cima seat is a real creative product. It has a unique option in
37.720.800*
Cima bench, seat of hardwood slats,
that place/street names or any motif can be laser cut into the
steel construction powdercoated in RAL
steelwork of the leading edge.
37.720.810*
2
Cima bench with logo on front, seat of hardwood
The design of the seat makes it ideal for use in multiple banks or
slats, steel construction powdercoated in RAL
alternatively, interspersed with co-ordinating planters.
C I M A S E AT
The range comes in 11 standard RAL colours as shown.
Part code
Description
37.721.800*
Cima seat, seat and back of hardwood slats, steel
37.721.810*
construction powdercoated in RAL
1
CIMA BENCH
The Cima bench shows off the clean, minimalist lines of the range.
Cima seat with logo on front, seat and back of
It uses rigid rectangular steel side frames linked using hardwood
hardwood slats, steel construction powdercoated
slats across the bench and a joist front and back to provide support.
in RAL
Length 1,500mm, sit height 410mm, depth 400mm.
You can choose from 11 standard colours:
RAL 1007, daffodil yellow
2
RAL 3000, fire red
C I M A S E AT
The Cima seat uses the bench as a template, with the backrest rising
RAL 3005, wine red
RAL 4004, violet bordeaux
RAL 5013, cobalt blue
RAL 6009, pine green
out from the side profiles, again linked using hardwood slats. Length
RAL 6005, moss green
RAL 6029, mint green
1,500mm, height 674mm, depth 510mm.
RAL 7016, anthracite grey
RAL 9005, deep black
C I M A C O O R D I N AT E D P R O D U C T S
Litter bins page no. 86.
RAL 9007, grey aluminium
Bollards page no. 117.
Planters page no. 132.
Cima bench, Part code 37.720.800
Cima seat, Part code 37.721.800
1500
400
410
674
1500
510
22
1
1
AFRA
AFRA
This seat blends traditional hardwood slats, with a modern steel
Part code
frame, which enables it to be used in any urban environment.
37.780.800*
Description
Afra seat with back and seat in hardwood slats,
length 2040 mm, width 450 mm, galvanised and
powder coated in the RAL colours listed below
The steel frame is hot dipped galvanized and can be polyester
You can choose from 11 standard colours:
powder coated in a range of 11 RAL colours.
RAL 1007, daffodil yellow
The mark of responsible forestry.
CU-COC-008530
RAL 3005, wine red
RAL 4004, violet bordeaux
RAL 5013, cobalt blue
RAL 6009, pine green
RAL 6005, moss green
RAL 6029, mint green
RAL 7016, anthracite grey
RAL 9005, deep black
RAL 9007, grey aluminium
2
2
ASIA
The Asia seat is a design which is both elegant and regal looking.
ASIA
Part code
37.480.800
Description
Asia seat, with backrest and four arm rests,
With its long sweeping wooden backrest continuing to the ground,
with mahogany wood slats, galvanised and
the Asia seat has an oriental feel and looks perfectly at home when
powder coated in a standard RAL colour
placed in a position of importance within a design scheme.
The seat also has two central armrests to give it an individual look
back rest are both manufactured from mahogany mounted on
and use from the two individual space seats, encouraging people to
a robust steel frame which is galvanised and powder coated in a
sit together but with a comfort factor.
standard RAL colour.
The curved back and arm rest coupled with a flat sitting element
The seat is 1860mm long and 900mm high with a depth of 600mm.
make the seat a very comfortable piece of furniture. The seat and
Design: Alessandro Riberti, by Modo.
Afra, Part code 37.780.800
Asia, Part code 37.480.800
2040
655,3
100
100
423,2
793,2
926
427,4
S T R E E T F U R N I T U R E : A F R A A N D A S I A S E AT
©1996 Forest Stewardship Council
RAL 3000, fire red
600
1860
1
1
2
23
2
S T R E E T F U R N I T U R E : FA L C O R E L A X
2
1
1
The seating is made from FSC hardwood slats.
FA LC O R E L A X B E N C H
Part code
Description
The steelwork can be optionally polyester powder coated in any of
31.502.021
FalcoRelax single sided bench with 2 supports
the 192 colours of the RAL register.
31.502.700
additional charge for powdercoating
The mark of responsible forestry.
steel construction in a RAL colour
31.504.021
FalcoRelax single sided bench with 3 supports
CU-COC-008530
31.504.700
additional charge for powdercoating
©1996 Forest Stewardship Council
steel construction in a RAL colour
2
FA LC O R E L A X S E AT
Part code
Description
31.500.021
FalcoRelax single sided seat with 2 supports
31.500.700
additional charge for powdercoating
steel construction in a RAL colour
1
FA LC O R E L A X B E N C H
A very compact, neat and inviting bench design with beautiful lines.
A standard element is 2,080mm overall, with a it height of 584mm
and a width of 569mm, however a middle support can be added as
31.501.021
FalcoRelax single sided seat with 3 supports
31.501.700
additional charge for powdercoating
required.
steel construction in a RAL colour
2
FA LC O R E L A X S E AT
The FalcoRelax is probably one of the most relaxing seats for
FA LC O R E L A X
The FalcoRelax family of seating has real design character and
outdoor use.
depth. The blend of gentle curves from the legs up across the seat
The ‘warm to touch’ wood and contoured backrest make the seat
and back of the chair create a very harmonious design feel – and a
a joy to rest in. A standard element with two supports is 2,081mm
very relaxing seat! All the products in the range are manufactured
overall width, height 938mm, sit height 680mm, depth 721mm.
from robust steel plate, hot dip galvanised to BS EN ISO 1461.
Also available with a third middle support.
Part code 31.502.021
Part code 31.500.021
2081
1950
2081
1950
1880
584
480
480
680
938
569
160
24
721
820
820
1880
1
1
FA L C O R E L A X D O U B L E S I D E D S E AT
FA LC O R E L A X D O U B L E S I D E D S E AT
The FalcoRelax double sided seat adds another dimension to the
Part code
Description
product range. It is now possible to design a scheme in which the
31.506.021
FalcoRelax double sided seat with 2 supports
seating is flexible enough to accommodate any combination of
31.506.700
vistas. The double sided version of the seat is majestic and solid
additional charge for powdercoating
steel construction in a RAL colour
whilst retaining the elegance of the design.
2
Part code
Description
The seating is made from untreated FSC hardwood slats with
31.511.021
FalcoRelax long starter seat with 3 supports
31.511.700
additional charge for powdercoating
steelwork hot dip galvanised to BS EN ISO 1461 which can be
FA LCO R E L A X LO N G S E AT
optionally polyester powder coated in any of the 192 colours of the
steel construction in a RAL colour
is 2,081mm overall, height 1,028mm, sit height 680mm, width
1,608mm. Also available with a third middle support.
31.512.021
FalcoRelax long add-on seat with 2 supports
31.512.700
additional charge for powdercoating
S T R E E T F U R N I T U R E : FA L C O R E L A X
RAL register. A standard element of the double sided FalcoRelax
steel construction in a RAL colour
3
2
FA LC O R E L A X LO N G S E AT
The long seat was developed in response to the need for a stylish
bench which would hold its own in a grand park or large open space
FA LC O R E L A X C H A I R
Part code
Description
31.508.021
FalcoRelax chair with back with 2 supports
31.508.700
where smaller benches look overshadowed, hence a 3,000mm long
additional charge for powdercoating
steel construction in a RAL colour
seat (or more) can be created.
3
By using a ‘starter’ seat with ‘add-ons’ you can create your own
FA LC O R E L A X C H A I R
Relax as long as you wish; using a 2m starter (with 3 supports) with
To complete the range, the FalcoRelax is also available as a chair for
2m add-on (2 supports) . This can be done for single, with back and
individual seating where there is a need for creating space for each
double.
other. The chair is constructed in the same manner as the whole
range but with a width of 778mm.
Part code 31.506.021
Part code 31.508.021
938
1028
778
647
721
160
606
578
1608
1
3
2
25
S T R E E T F U R N I T U R E : A L B AT R O S S E R I E S
2A
2
1
1
A L B AT R O S S E AT ( C O N C R E T E )
Part code
Description
A L B AT R O S
The attractive Albatros range of seating is based on a laser cut side
37.800.008*
Albatros seat, with seat and back in steel rod
frame with a graceful theme resonant of a bird in flight.
37.801.004*
Albatros seat, with seat and back in impregnated
The products provide much choice with benches and seats with
37.802.002*
Pine
backrests in a variety of materials (stainless, wood, mesh and rod)
Albatros seat, with seat and back in varnished
with optional mounting arrangements.
hardwood
37.803.006*
Albatros seat, with seat and back in elliptical
tubing 60x30 mm
2
Overall dimensions: mm 2,350x710x760h. The seat and back are in
Description
37.810.108*
Albatros bench without back, seat in steel rod
37.811.104*
Albatros bench without back, seat in impregnated
Pine
37.812.102*
Albatros bench without back, seat in varnished
37.813.106*
Albatros bench without back, seat in elliptical
hardwood
tubing, 60x30mm
steel rod grid Ø8 mm or alternatively hardwood or Pine rectangular
seating boards with rounded edges measuring 1,800x55x35 mm.
The seating boards are individually fixed to the frame.
Available with hardwood boards, Pine, 8mm steel rods, or with
attractive rounded horizontal tubing. The illustration shows the
bench with a seating and back of 8mm steel rods.
2
You can choose from 11 standard colours:
RAL 1007, daffodil yellow
RAL 3000, fire red
RAL 3005, wine red
RAL 4004, violet bordeaux
RAL 5013, cobalt blue
RAL 6009, pine green
RAL 6005, moss green
RAL 6029, mint green
RAL 7016, anthracite grey
RAL 9005, deep black
RAL 9007, grey aluminium
A L B AT R O S B E N C H ( C O N C R E T E )
The bench comprises of two round concrete bases and a steel
reinforced 6mm thick frame. Length 1,815 mm. Overall
dimensions: mm 2350x540x440h. Available with hardwood or Pine
boards, 8mm steel rods, or with attractive rounded horizontal tubes.
The illustration 2A shows the bench with seating in hardwood.
N.B.
Albatros seat
710
A L B AT R O S S E AT ( C O N C R E T E )
The seat includes two round concrete bases and a steel reinforced
6mm thick frame. Length 1,815 mm.
A L B AT R O S B E N C H ( C O N C R E T E )
Part code
1
Also available curved in its’ length and with wall fixed seat.
Albatros bench
1815
440
760
1815
2350
26
540
2350
1
A L B AT R O S S E AT ( S T E E L T U B I N G )
The seat includes two base plates for surface fixing and a reinforced
1
A L B AT R O S S E AT ( S T E E L T U B I N G )
Part code
Description
6mm thick frame. Length 1,815 mm.
37.805.008*
Albatros seat in round 8mm steel rod
Overall dimensions: mm 1,925x710x760h.
37.806.004*
Albatros seat in impregnated Pine
37.807.002*
Albatros seat in varnished hardwood
Available with hardwood or Pine boards, 8mm steel rods, or with
37.808.006*
Albatros seat in elliptical tubes, 60x30mm
attractive rounded horizontal tubing. Photo 1 has seating and back
2
boards in hardwood.
Part code
Description
37.815.108*
Albatros bench without back, seat in round 8mm
A L B AT R O S B E N C H ( S T E E L T U B I N G )
2
steel rod
37.816.104*
reinforced 6mm thick frame. Length 1,925 mm.
pine
37.817.102*
Overall dimensions: mm 1,925x430x440h. Available with hardwood
or Pine boards, 8mm steel rods, or with attractive rounded horizon-
A L B AT R O S WA L L B E N C H
Part code
A L B AT R O S , WA L L B E N C H
This is the wall mounted version of the Albatros seat range, with a
beautiful adaptation without legs.
37.820.800*
Description
Albatros bench for wall assembly,
seat in 8 mm rod grid
37.822.800*
Requires a sturdy wall to bolt to.
Albatros bench without back, seat in elliptical
tubing 60x30mm
3
3
Albatros bench without back, seat in varnished
hardwood
37.818.106*
tal tubing. Photo 2A shows the bench with 8mm steel rods, photo
2B has seating in hardwood.
Albatros bench without back, seat in impregnated
Albatros bench for wall assembly, seat and back
out of varnished hardwood
4
4
A L B AT R O S , S TA I N L E S S S T E E L
An elegant seat leaning backwards.
With stainless steel side supports (quality 316). Available with
A L B AT R O S , S TA I N L E S S S T E E L
Part code
Description
05.807.000
Albatros seat, with back and seat in hardwood,
weigh 58 kg
hardwood slats (photo 4) or tubes 60x30 mm.
05.808.000
The side supports are laser cut and have oval base plates.
Albatros seat, with back and seat in tubes
60x30 mm, weigh 58 kg.
S T R E E T F U R N I T U R E : A L B AT R O S S E R I E S
A LBAT ROS B E N C H ( S T E E L T U B I N G )
The bench includes two base plates for surface fixing and a
Dimensions: 1815x760x710 mm.
* THERE ARE 11 STANDARD COLOURS AVAILABLE:
See details on opposite page.
4
1
2B
2A
3
27
S T R E E T F U R N I T U R E : TA U R U S S E R I E S
1
1
2
1
1
2
2
TAU R U S ( C O N C R E T E S U P P O R T S )
TAU R U S S E AT I N G
Part code
Description
The Taurus range is similar to the Albatros products (previous page)
37.840.800*
Taurus seat, seat and back in steel rod grid 8 mm
with a themed contoured design available in a number of variants
37.842.800*
Taurus seat, seat and back in varnished hardwood
and materials. Classic Italian design gives simplicity both depth and
37.843.800*
Taurus seat, seat and back in elliptical tubing of
quality. Available with concrete side supports or with bolt down base
60x30 mm
plates. A choice of RAL colours is also available.
37.850.800*
Taurus bench, seat in steel rod grid 8 mm
37.852.800*
Taurus bench, seat in varnished hardwood
37.853.800*
Taurus bench, seat in elliptical tubing of
TAU R U S ( C O N C R E T E S U P P O R T S )
Available as a seat or bench.
60x30 mm
The seat is supported by 2 lateral half-elliptical blocks in vibrated
2
1
concrete with rounded edges. The seat and back lateral supports
TAU R U S ( B A S E P L AT E S )
are in sheet steel 6 mm thick and laser cut. The body of the bench
Part code
Description
37.845.800*
Taurus seat, seat and back in round 8 mm steel rod
37.847.800*
Taurus seat, seat and back in varnished hardwood
37.855.800*
Taurus bench, seat in impregnated pinewood
37.857.800*
Taurus bench, seat in varnished hardwood
structure is manufactured from steel tubing to provide a sturdy
framework which is fastened to the concrete side supports.
Overall dimensions without back: 2,220x690x450mm sit height.
Overall dimensions with back: 2,220x690x740mm overall height.
You can choose from 11 standard colours:
RAL 1007, daffodil yellow
RAL 3000, fire red
2
TAU R U S ( B A S E P L AT E S )
Available as a seat or bench.
RAL 3005, wine red
RAL 4004, violet bordeaux
Seat with inverted U-shaped steel tubing supports to which are
RAL 5013, cobalt blue
RAL 6009, pine green
welded the supporting profiles for the seat and oval flanges for
RAL 6005, moss green
RAL 6029, mint green
surfacing mounting. Sides and flanges are in 6 mm thick, laser cut
RAL 7016, anthracite grey
RAL 9005, deep black
sheet steel.
RAL 9007, grey aluminium
Overall dimensions without back: 1,925x500x450mm sit height.
Overall dimensions with back: 1,925x640x770mm overall height.
Taurus, Part code 37.842.800
Taurus, Part code 37.845.800
1815
770
440
740
440
2050
2220
28
640
600
1815
1805
1925
FA N TA S Y S E AT I N G
The Fantasy seating range mirrors the Taurus range (previous page)
1
Part code
FA N TA S Y ( C O N C R E T E S U P P O R T S )
Description
but uses a tubular structure to create a harmonious rounded feel.
37.860.800*
Fantasy seat, with seat and back in steel rod
The tubing provides a lightweight feel to the seats whilst delivering a
37.861.880*
Fantasy seat, with seat and back in impregnated
Pine
robust structure suitable for any urban environment.
Available with concrete side supports or with bolt down base plates.
37.862.800*
hardwood
A choice of RAL colours is also available.
1
FA N TA S Y ( C O N C R E T E S U P P O R T S )
Manufactured from Ø35 mm and 2.5 mm thick steel tubing and of
fastened to the two trapezoidal shaped vibrated concrete side blocks
with rounded edges. Overall dimensions bench with back: mm
1,870x700x760h, without back: mm 1,870x700x425h. Available
with hardwood or Pine boards, 8mm steel rods, or with attractive
rounded horizontal tubing.
37.870.800*
Fantasy bench, seat in steel rod grid
37.871.800*
Fantasy bench, seat in impregnated Pine
37.872.800*
Fantasy bench, seat in varnished hardwood
2
FA N TA S Y ( B A S E P L AT E S )
Part code
Description
37.865.800*
Fantasy seat, with seat and back in steel rod
37.866.800*
Fantasy seat, with seat and back in impregnated
Pine
37.867.800*
Fantasy seat, with seat and back in varnished
hardwood
FA N TA S Y ( B A S E P L AT E S )
37.875.800*
Fantasy bench, with seat in rod grid 8 mm
sheet steel plates 4 mm thick. Designed for surface mounting. Overall
37.876.800*
Fantasy bench, with seat in impregnated Pine
dimensions bench with back: mm 1,870x700x760h, without back
37.877.800*
Fantasy bench, with seat in varnished hardwood
The seat has a steel tubular frame Ø 35 mm and 2.5 mm thick and
mm 1,870x585x450h. Available with hardwood or Pine boards,
8mm steel rods, or with attractive rounded horizontal tubing.
* THERE ARE 11 STANDARD COLOURS AVAILABLE:
See details on opposite page.
Fantasy (steel frame), Part code 37.865.800
Fantasy (concrete), Part code 37.860.800
1560
425
450
760
800
1560
700
1870
1
2
S T R E E T F U R N I T U R E : FA N TA S Y S E R I E S
non alloyed sheet steel plates 4 mm thick. The structure is
2
Fantasy seat, with seat and back in varnished
1760
585
1
2
1
2
29
S T R E E T F U R N I T U R E : FA L C O T R T I P L E
1A
1B
1A
FA LC OT R I P L E W I T H M E S H
FA LC O T R I P L E
Part code
Description
To create a futuristic and functional picnic set was the main idea
36.400.008
FalcoTriple seat, with seat and back of steel grid
behind this new Falco-series, consisting of a bench with or without
elements
back-rest and a table.
36.400.700
additional charge for powder-coating in RAL
36.402.008
FalcoTriple bench, with seat of steel grid elements
The end frames are laser cut to show the three leg form which gives
36.402.700
additional charge for powder-coating in RAL
the product its’ name. Between the side supports you find solid
36.404.008
FalcoTriple table, with table top of steel grid
mesh surfaces with grids of 76x15 mm. A comfortable seat which
elements
you can use any time of the year.
36.404.700
1B
additional charge for powder-coating in RAL
FA LC OT R I P L E W I T H WO O D S L AT S
Part code
36.410.011
Between the side support you find mesh surfaces with grids of
76x15 mm (photo 1A) or FSC certified hardwood slats of 120x40
Description
mm (photo 1B).
FalcoTriple seat, with seat and back of FSC
hardwood
36.410.700
1
additional charge for powder-coating steel
FA LC O T R I P L E B E N C H
Total width 1,846 mm, seat height 430 mm, total depth 579 mm.
construction in RAL
36.412.011
FalcoTriple bench, with seat of FSC hardwood
36.412.700
additional charge for powder-coating steel
36.414.011
FalcoTriple table, with table top of FSC hardwood
36.414.700
additional charge for powder-coating steel
The benches with back has a total height of 819 mm, without back
the total height is 440 mm.
construction in RAL
2
FA LC O T R I P L E TA B L E
Total width 1,846 mm, total height 715 mm, total depth 730 mm.
construction in RAL
430
715
811
FalcoTriple bench with back, Part code 36.402.008
695
FalcoRelax table, Part code 36.404.008
160
290
30
1800
1800
CRUDELIA
The Crudelia is a very elegantly designed seat seemingly from a
1
Part code
CRUDELIA ( S TE EL ROD)
Description
single piece of tube creating a ledge-like seat – a simple seat which
37.830.008
Crudelia seat in steel rod Ø8 mm, free standing,
seat length 1,880 mm
makes a statement. The Crudelia is available manufactured from
robust steel rods or in a warmer hardwood finish.
37.830.800*
Steelwork is available in a choice of 11 RAL colours.
37.839.000
1
2
CRUDELIA ( STEEL ROD)
additional charge for powdercoating framework
in a standard RAL colour*
anchoring base plate 435mm long
C R U D E L I A ( H A R DWO O D )
The seat frame is manufactured in steel tubing Ø 40 mm, 2.5 mm
Part code
thick, appropriately curved and welded in such a way as to produce
37.831.002
Crudelia seat in varnished hardwood, free
standing, seat length 1,880 mm
37.831.800*
Seat and back are in steel rod grid Ø 8 mm. Overall dimensions: mm
1,880x800x785 h. Indicative weight: 48 kg.
additional charge for powdercoating framework
in a standard RAL colour
37.839.000
anchoring base plate 435mm long
You can choose from 11 standard colours:
2
C R U D E L I A ( H A R DWO O D )
The seat and backrest are manufactured from hardwood slats
35x50mm shaped to fit the bench profile. Secured to bench via
hidden steel support brackets.
Overall dimensions, width 1,880mm, depth 800mm, height 785mm.
Indicative weight 42kg.
RAL 3005, wine red
RAL 4004, violet bordeaux
RAL 5013, cobalt blue
RAL 6009, pine green
RAL 6005, moss green
RAL 6029, mint green
RAL 7016, anthracite grey
RAL 9005, deep black
Crudelia, Part code 37.831.002
800
1880
785
1880
785
RAL 3000, fire red
RAL 9007, grey aluminium
Crudelia, Part code 37.830.008
800
RAL 1007, daffodil yellow
STREET FURNITURE: CRUDELIA
a solid structure, not subject to deformation.
Description
1
2
2
31
STREET FURNITURE: NEO BARCINO AND MUNICH
2
1
1
N E O B A RC I N O
1
Part code
Description
NEO BARCINO
The Neo Barcino seat is a functional bench which mixes a futuristic
38.100.800
Neo Barcino seat with coated bench supports and
arm rests with traditional wood slats. A new design to the Falco
woorden parts, length 1,800mm
portfolio, the Neo Barcino brings a fresh European feel and is ideal
38.105.800
Neo Barcino seat with coated bench supports and
for modern developments and locations whether public or private,
urban or country.
woorden parts, length 650mm
2
The robust steel armrests are rust resistant and the hardwood is
MUNICH
treated. Optionally the bench is availabie in FSC hardwood.
Part code
Description
30.351.800
Munich seat with untreated Kambala seating
30.352.800
and back parts
Available in 2 lengths: 650 and 1,800 mm. Height is 820mm with a
Munich seat with thermic treated wooden
sit height of 450mm. Depth is 715mm.
seating and back parts
Design by Joaquim Carandel for Fundicio Ductil Benito.
2
MUNICH
The Munich seat is designed with a feeling of weightlessness in
mind. The wood slats are supported from the main structure using
stainless steel brackets which make the seat look as if it is hovering
WW W . F A L C O . C O . U K
in mid-air – yet the design is very sturdy.
The wooden parts of the seat are manufactured from untreated
‘thermo’ wood, known for its unique characteristics. The bench is
delivered in flat pack form.
Neo Barcino, Part code 38.100.800 / 38.105.800
Munich, Part code 30.351.800 / 30.352.800
715
670
450
820
850
450
32
1
2
J E V E R S E AT
N AO S
A responsible detached design and yet has a fresh look. The mostly
The Naos ‘perch’ stool is a single seat which is both stylish and
horizontal line is breached by the economy savings through the slats
unobtrusive. Manufactured from cast iron, it has a sculptural feel
of thermo wood. This wood is especially fabricated to guarantee an
and is ideal for punctuating areas where a brief rest may be required.
extra long lifespan.
Additionally the top of the Naos stool is available in Iroko wood,
marble, granite or perforated steel so that it can be used inside or
Steel work is galvanised or optionally galvanised and powder coated.
out, to complement any number of design schemes.
Standard colour. Standard colour is anthracite grey, comparable with
Additionally a stainless steel ring defines its contact point with the
DB 703. With lengthened foot to concrete.
ground giving the Naos a ‘classy’ feel.
The cast iron is protected against rusting and powder coated in
length 1730 mm, depth 450 mm, sit height 450 mm.
silver, charcoal grey or metallic bronze.
STREET FURNITURE: JEVER AND NAOS
Height above ground level 810 mm, 350 mm below ground level,
The Naos is also available as a long bench plus there are a number
of other co-ordinated products such as the Pandora litter bin which
enable a co-ordinated street scene to be developed.
1
Jever, Part code 30.347.800
450
JEVER
Part code
Description
30.347.800
Jever seat with PAG-wooden sit and back parts,
steel parts powder coated with DB 703,
810
anthracite grey
450
2
N AO S
Part code
Description
37.460.800
Naos stool with cast iron footing and mahogany
seat. Base powder coated in RAL colour
350
37.461.800
Naos stool with cast iron footing and Vicenza
stone seat. Base powder coated in RAL colour
1
2
33
S T R E E T F U R N I T U R E : FA L C O B L O C
1
1
2
1
FA LC O B LO C B E N C H
Part code
Description
FA LC O B LO C R A N G E
The FalcoBloc range of products are very popular due to their
31.055.121
FalcoBloc bench without back, free standing
absolute simplicity of design and quality of construction. An
31.055.700
additional charge for powdercoating steel
incredibly sharp and neat design, the FalcoBloc is a versatile shape
construction in a RAL colour
and blends well into both modern and traditional settings.
31.056.121
31.056.700
FalcoBloc bench without back, with strip for
mounting on conrete
Manufactured from FSC certified hardwood and robust steel
additional charge for powdercoating steel
framework, hot dip galvanised to BS EN ISO 1461, the FalcoBloc
can be utilitarian in style or when powder coated in any of the 192
construction in a RAL colour
2
standard RAL colours, create a real dominant statement.
FA LC O B LO C S E AT
Part code
Description
31.059.121
FalcoBloc seat with back, with strip for
The framework is manufactured in 80mm square section and all the
products in the range can be supplied either free standing or with an
mounting on conrete
31.059.700
additional strip for bolting to a concrete base.
additional charge for powdercoating steel
construction in a RAL colour
31.058.121
31.058.700
1
FalcoBloc seat with back, free standing
FA LC O B LO C B E N C H
The FalcoBloc bench without a back is a really functional and
additional charge for powdercoating steel
versatile product: length 1,660mm, sit height 450mm, depth
construction in a RAL colour
430mm.
The mark of responsible forestry.
2
FA LC O B LO C S E AT
The FalcoBloc seat with a back provides that extra chunk of comfort:
CU-COC-008530
length 1,660mm, overall height 800mm, sit height 450mm, depth
©1996 Forest Stewardship Council
510mm.
FalcoBloc, Part code 31.056.121
FalcoBloc, Part code 31.058.121
80
34
1660
80
450
450
800
430
160
430
80
1660
80
510
1
1
FA LC O B LO C S T O O L
FA LC O B LO C S TO O L
The FalcoBloc stool is a neat shortened version of the FalcoBloc
Part code
Description
bench ideal for individual seating arrangements.
31.053.121
FalcoBloc stool without back, free standing
Length 600mm, sit height 450mm, depth 430mm.
31.053.700
additional charge for powdercoating steel
construction in a RAL colour
2
31.054.121
FA LC O B LO C TA B L E
The FalcoBloc table is a natural addition to the FalcoBloc range
providing the flexibility to create great patio areas for drinking or
mounting on conrete
31.054.700
snacking.
additional charge for powdercoating steel
construction in a RAL colour
Length 1,700mm, height 750mm, depth 725mm.
2
FA L C O B L O C P I C N I C TA B L E
The FalcoBloc picnic table is a great modern, stylish alternative to the
FA LC O B LO C TA B L E
Part code
Description
31.057.121
FalcoBloc table, free standing
31.057.700
additional charge for powdercoating steel
31.052.121
FalcoBloc table, with strip for mounting on conrete
31.052.700
additional charge for powdercoating steel
traditional all wood tables found in many parks and pubs in the UK.
Length 1,700mm, width overall 1,565mm.
construction in a RAL colour
The mark of responsible forestry.
construction in a RAL colour
CU-COC-008530
3
FA LC O B LO C P I C N I C TA B L E
©1996 Forest Stewardship Council
Part code
Description
31.040.121
FalcoBloc picnic table, free standing
31.040.221
FalcoBloc picnic table, with strip for mounting
on conrete
C O - O R D I N AT E D P R O D U C T S
31.040.700
Planters page no. 135.
additional charge for powdercoating steel
construction in a RAL colour
FalcoBloc, Part code 31.057.121
FalcoBloc, Part code 31.040.121
725
450
420
100
1700
750
725
750
100
1700
S T R E E T F U R N I T U R E : FA L C O B L O C
3
FalcoBloc stool without back, with strip for
357
725
3
1
2
35
2
S T R E E T F U R N I T U R E : FA L C O C U B E
1
1
FA LC O C U B E S TO O L
FA LC O C U B E
Part code
Description
The FalcoCube range of products make a real statement about
31.400.121
FalcoCube stool 480mm x 480mm
wood. Manufactured from substantial 80mm thick FSC certified
31.400.700
additional charge for powdercoating steel
hardwood, the FalcoBloc family is solid and refined.
construction in a RAL colour
A gentle scoop at the front of the seats gives the products a
2
defining profile and makes the functionality of the range
FA LC O C U B E C H A I R
complement the style.
Part code
Description
31.420.121
FalcoCube chair 480x570 mm
31.420.700
additional charge for powdercoating steel
Along with complementary planters and litter bins, the Falco range
of wood based products gives designers a real choice when wishing
construction of stool in a RAL colour
to use natural materials.
The framework is all hot dip galvanised steel and can be polyester
powder coated in any of the 192 RAL colours.
1
FA LC O C U B E S T O O L
The FalcoCube stool is a chunky and robust seat, dimensions: width
480mm, depth 480mm, sit height 470mm.
The mark of responsible forestry.
2
CU-COC-008530
FA LC O C U B E C H A I R
The FalcoCube chair is an extension of the FalcoCube stool.
©1996 Forest Stewardship Council
With the addition of a backrest we have provided and additional
level of comfort to the range.
Dimensions: width 480mm, depth 570mm, overall height 800mm.
Part code 31.400.121 and 31.420.221
Part code 31.400.121
90
190
480
480
36
470
470
800
480
1
FA L C O C U B E B E N C H S I N G L E S I D E D
The FalcoCube single sided bench is a development of the FalcoCube stool design, extending the theme to 1.2m. These are an
1
FA LC O C U B E B E N C H S I N G L E S I D E D
Part code
Description
31.405.121
FalcoCube bench single sided length 1,200mm,
depth 480mm
ideal product for precincts and shopping centres, creating a solid
statement and blending well with natural stone floors whilst offering
31.405.700
construction in a RAL colour
little to vandals.
Dimensions: length 1,200mm, sit height 470mm, depth 480mm.
2
additional charge for powdercoating steel
FA L C O C U B E B E N C H D O U B L E S I D E D
2
FA LC O C U B E B E N C H D O U B L E S I D E D
Part code
Description
31.410.121
FalcoCube bench double sided length 1,600mm,
The FalcoCube double sided version of the bench is an incredibly
semi secure street environments, for providing mass seating for
depth 740mm
31.410.700
additional charge for powdercoating steel
construction in a RAL colour
shoppers and pedestrians.
Dimensions: length 1,600mm, sit height 470mm, depth 740mm.
The mark of responsible forestry.
CU-COC-008530
©1996 Forest Stewardship Council
Part code 31.405.121
480
470
470
1200
S T R E E T F U R N I T U R E : FA L C O C U B E
solid and sturdy looking piece of furniture. Great for malls or for
Part code 31.410.121
740
470
470
1600
37
STREET FURNITURE: KOCHLIAS AND URBIS
2
1
1
1
KO C H L I A S
1
Part code
Description
KO C H L I A S
The Kochlias seat is a new product for the Falco range from the
37.710.800*
Kochlias seat, straight with hardwood slats,
Italian City Design collection. With classical lines and cast end
dims 1,980x880x810mm,
supports the seat has a great timeless feel.
powder coated in RAL colour
37.713.800*
Kochlias seat, round tubing,
The seat is available in two versions; as an exotic hard wood bench
dims 3,750x1,350x810mm,
or utilising round steel tubes for the seat and backrest.
powder coated in RAL colour
2
The cast supporting legs are manufactured from corrode resistant
URBIS
Part code
37.715.800*
37.716.800*
Description
aluminium. The seat and back are in exotic hard wood staves with
Urbis bench without back, with hardwood slats,
rectangular cross-section 50 x 40mm with rounded edges, or with
dims 1,800x450x450mm,
staves having curved cross-section 35mm thick or in profiled steel
powder coated in RAL colour
tubing staves Ø40mm.
Urbis seat with back, with hardwood slats,
dims 1,800x850x450mm,
powder coated in RAL colour
2
URBIS
Also from City Design, the Urbis seat also has a classical feel but
You can choose from 11 standard colours:
with clean lines, this is another new model in the Falco range.
RAL 1007, daffodil yellow
RAL 3000, fire red
The Urbis has a sleek design with nostalgic details.
RAL 3005, wine red
RAL 4004, violet bordeaux
RAL 5013, cobalt blue
RAL 6009, pine green
The backrest is slightly bent backwards for a pleasant seat and as
RAL 6005, moss green
RAL 6029, mint green
with most Falco seating, the Urbis also available as a bench without
RAL 7016, anthracite grey
RAL 9005, deep black
a backrest. The seat is equipped with two metal plates (one on each
support) for bolting to the ground.
RAL 9007, grey aluminium
Kochlias, Part code 37.713.800
Urbis without back, Part code 37.715.800
3750
38
1800
450
810
450
1
1
VA L E N T I N O
VA L E N T I N O
The Valentino seat is a well known European design, evoking the
Part code
Description
19th Century and the development of pubic parks and streetscapes.
37.730.004
Valentino seat with back, length 1700 mm,
The design is very robust with main seat supports in cast iron and
37.731.002
in impregnated pine
Valentino seat with back, length 1700 mm,
in treated hardwood
these are connected using wooden slats for the seat and backrest.
37.735.004
Valentino seat with back, length 2000 mm,
in impregnated pine
There are two main designs in the range – with or without arm rests.
37.736.002
The cast iron supports are coated black and the standard wood is
Valentino seat with back, length 2000 mm,
in treated hardwood
Iroko hardwood (pine also available). The seat is designed for bolt
37.736.202
Valentino seat with back and 2 armrests,
S T R E E T F U R N I T U R E : VA L E N T I N O A N D V I E N N A
down and requires assembly.
length 2000 mm, in treated hardwood
Dimensions: length 1,700mm or 2,000mm, sit height 420mm,
2
overall height 695mm.
Part code
VIENNA
Description
37.880.800*
Vienna seat, with pine wood slats,
37.881.800*
Vienna table with pine wood slats,
length 1,620 mm, powder coated in RAL colour
2
VIENNA
The Vienna seat is a nostalgic design with pine wood slats for the
seat, making a comfortable design for a park seat.
length 1,500mm, depth 710mm,
powder coated in RAL colour
It is available in a length of 1,620mm for approximately 3 people.
You can choose from 11 standard colours:
The seat supports/legs are manufactured from cast aluminium,
RAL 1007, daffodil yellow
RAL 3000, fire red
creating a lighter feel, which are coated in a standard colour.
RAL 3005, wine red
RAL 4004, violet bordeaux
RAL 5013, cobalt blue
RAL 6009, pine green
A table is also available for this design.
RAL 6005, moss green
RAL 6029, mint green
RAL 7016, anthracite grey
RAL 9005, deep black
RAL 9007, grey aluminium
Valentino, Part code 37.736.002
Vienna, Part code 37.880.800
660
600
1500
410
695
820
2000
1620
1
1
2
2
39
STREET FURNITURE: MONET
MONET
Part code
Description
M O N E T S E AT
The chic Monet seat evokes the floral brush strokes of the famous
37.725.800*
Monet seat, seat and back of aluminium,
French impressionist and is a great seat for parks, gardens and other
length 1300 mm, powdercoated in RAL
green areas. With a backrest as standard, the Monet seat enables a
Monet seat, seat and back of cast iron,
relaxing experience.
37.725.820*
length 1300 mm, powdercoated in RAL
37.726.800*
37.727.800*
Monet seat, with supports of aluminium,
The seat is formed so that there are two gently rounded waveforms
length 1300 mm, seat and back of hardwood slats,
at the knees and backrest. The Monet is available in three
powdercoated in RAL
versions, in aluminium or cast iron with floral motifs (780mm high)
Monet seat with supports of aluminium,
or elegantly equipped with hardwood slats on the seat and backrest
seat and back of hardwood slats, length 1800 mm,
(800mm high).
powdercoated in RAL
37.727.820
Monet seat with supports of cast iron,
The Monet is available in two lengths 1,300 or 1,800mm, with a sit
seat and back of hardwood slats, length 1800 mm,
height of 460mm. The standard colour is black, however there are
powdercoated in RAL
also other standard RAL colours available (see list).
You can choose from 11 standard colours:
RAL 1007, daffodil yellow
RAL 3000, fire red
RAL 3005, wine red
RAL 4004, violet bordeaux
M O N E T C O - O R D I N AT E D P R O D U C T S
RAL 5013, cobalt blue
RAL 6009, pine green
In addition to the Monet series of seating, planters, bollards and a
RAL 6005, moss green
RAL 6029, mint green
litter bin are also available, to create a co-ordinated street scene or
RAL 7016, anthracite grey
RAL 9005, deep black
park area.
RAL 9007, grey aluminium
Litter bins page no. 86.
Bollards page no. 116.
Planters page no. 132.
Monet, Part code 37.726.800
1300
635
460
[email protected]
40
1
FENICIA CONCEP T
F E N I C I A S E AT
The Fenicia range of street furniture is a modern and very flexible
Part code
design. Manufactured from galvanised and powder coated modular
37.470.800
Description
Fenicia seat with back, powdercoated in RAL,
per metre
steel elements, the Fenicia concept enables designers to create any
37.471.800
number of layouts and variations, especially when coupled with
Fenicia bench without back, powdercoated in RAL,
per metre
other co-ordinated products such as the Gemini litter bin.
2
1
F E N I C I A S E AT A N D B E N C H
The Fenicia seating system is composed of modular steel strips
FENICIA CHAIR
Part code
Description
37.475.800
Fenicia chair, powdercoated in RAL
formed into a natural seat shape. The steel strips are 40mm wide
The bench is sold per metre and we can define the shape you
01538 - 380080
require as a ‘made to measure’ product – just give us the curves and
we will produce a seat to suit.
Available with or without a backrest – as a seat - the rear of the
backrest has a Ø5mm steel rod to give the structure rigidity and the
whole structure is mounted below ground for solidity.
Fenicia
Dimensions: length per 1,000mm, height 770mm, sit height
440mm, depth 520mm (with backrest) 460mm (without backrest).
2
FENICIA CHAIR
The Fenicia chair is a standard product made up of six Fenicia steel
elements and makes a great single seat for strategic positioning in a
scheme.
The steel strips, which are galvanised and powder coated, are joined
STREET FURNITURE: FENICIA SERIES
and 10mm thick and are galvanised and powder coated as standard.
behind the backrest using Ø5mm steel rod for rigidity.
into the ground.
40
The whole structure is then mounted on a robust stud for mounting
520
2
1
1
41
1
STREET FURNITURE: ANGEL
2
2
1
A N G E L , S TA I N L E S S S T E E L
1
A N G E L , S TA I N L E S S S T E E L
Part code
Description
The Angel seat is a stylish and comfortable seat from our City Design
05.890.108
Angel seat with backrest
range. Produced wholly from stainless steel the seat is a shimmering
05.891.108
Angel bench without backrest
statement of quality and looks at home in any environment; old or
2
new, urban or landscape.
A N G E L , G A LVA N I S E D S T E E L
Part code
Description
37.890.800*
Angel seat with backrest, galvanised and
The seat is manufactured from Ø8mm stainless steel rods, welded to
a sub-frame, which in turn is mounted onto the main structure.
powder coated in RAL
37.891.800*
Angel bench without backrest, galvanised and
The seat can also be supplied with a backrest for a more relaxing
powder coated in RAL
experience and is designed to be bolted to a solid surface.
You can choose from 11 standard colours:
RAL 1007, daffodil yellow
RAL 3000, fire red
RAL 3005, wine red
RAL 4004, violet bordeaux
RAL 5013, cobalt blue
RAL 6009, pine green
RAL 6005, moss green
RAL 6029, mint green
RAL 7016, anthracite grey
RAL 9005, deep black
2
A N G E L , G A LVA N I S E D S T E E L
As an alternative, the Angel bench is also available in hot dip
galvanised steel and polyester powder coated in a choice of 11
standard RAL colours (see box).
RAL 9007, grey aluminium
Again, the seat can also be supplied with a backrest and is designed
to be bolted to a solid surface.
Angel, Part code 05.891.108 / 37.891.800
Angel, Part code 05.890.108 / 37.890.800
2000
150
616
1300
582
640
850
150
432
456
800
2000
850
42
350
1300
350
425
1
1
M O I R E S E AT I N G
MOIRE
The Moire seating system is a combination of great style and
Part code
Description
innovation in stainless steel or powder coated galvanised steel. It
05.490.000
Moire seat with backrest
has a light and flexible look that is supported by the solid presence
05.491.000
Moire seat with backrest and external curve
of the Vicenza stone pedestal. Thanks to the open structure of the
05.492.000
Moire seat with backrest and internal curve
design, the Moire performs remarkably well in large open areas, with
2
a very striking part of the Moire being the beautiful, bright Curved,
Part code
Description
high backrest.
05.495.000
Luna bench with inner lighting
LUNA
The Moire is also very modular, being manufactured from three
2
LU N A
curve and an internal curve. The Moire is constructed of stainless
The Luna bench makes an impact in two ways: it has a simple and
steel and supports of 5mm laser cut thick plate. The seating and
solid line, plus the addition of an integrated lighting system. The
backrest elements are manufactured from Ø10mm 304 stainless or
external structure is manufactured from perforated stainless steel
galvanised steel rods.
allowing the light to flood from the bench at night.
Dimensions: standard length 2,000mm, height 1,020mm, 680mm
Manufactured from 304 stainless, two fluorescent lamps exude a
deep. Designer: Allesandro Piaser.
ward light via Lexan Opalescent covers. The bench is secured to
STREET FURNITURE: MOIRE AND LUNA
standard elements (all with a backrest); a straight run, and external
the ground allowing the top to be removed for lamp changing and
access to the electrics. Dimesions: length 2,000mm, depth 500mm,
Part code 05.492.000
sit height 565mm.
Designer Marco Guerrazzi.
Part code
05.491.000
Luna, Part code 05.495.000
680
500
565
Part code
05.490.000
1020
Moire
2000
500
1
2
2
43
1
2
STREET FURNITURE: CAMILLA
3
4
4
1
CAMILL A BENCH
C A MILL A R ANGE
Part code
Description
The Camilla range of seating is an elegant family of products capable
37.760.800*
Camilla bench, seat out of round 8mm steel rod
of being situated in any environment – internal or external. There is
and powdercoated in RAL
a whole group of seats, tables and benches to create an integrated
37.764.800*
2
Camilla bench, seat out of varnished hardwood,
meeting place with public and private areas in the same style.
steel powdercoated in RAL
All models are available in Ø8mm round rod or varnished hardwood.
C A M I L L A S E AT
Available as freestanding or with anchor plate to bolt down using
M10 bolts.
Part code
Description
37.750.800*
Camilla seat with back in round 8 mm,
and powdercoated in RAL
37.754.800*
3
1
Camilla seat with back in varnished hardwood,
C A MILL A BENCH
A perfect simple bench seat with neatly round sitting area.
steel powdercoated in RAL
Dimensions:1,560mm long, sit height 420mm, depth 555mm.
C A M I L L A S E AT W I T H A R M R E S T S
2
Part code
Description
37.751.800*
Camilla seat with back and armrests, in 8 mm steel
rod and powdercoated in RAL
37.755.800*
Camilla seat with back and armrests, in
C A M I L L A S E AT
Standard steel Camilla seat with backrest with a park bench feel.
Dimensions: 1,560mm long, sit height 420mm, overall height
780mm, depth 565mm.
varnished hardwood, steel powdercoated in RAL
You can choose from 11 standard colours:
RAL 1007, daffodil yellow
RAL 3000, fire red
RAL 3005, wine red
RAL 4004, violet bordeaux
RAL 5013, cobalt blue
RAL 6009, pine green
RAL 6005, moss green
RAL 6029, mint green
RAL 7016, anthracite grey
RAL 9005, deep black
RAL 9007, grey aluminium
4
C A M I L L A S TA I N L E S S S T E E L
Part code
Description
05.375.000
Camilla seat of stainless steel
05.376.000
Camilla seat of stainless steel, seat of hardwood
3
C A M I L L A S E AT W I T H A R M R E S T S
The addition of armrests give this seat a more regal appearance for
a longer stay. Dimensions: 1,560mm long, sit height 420mm, overall
height 780mm, depth 565mm.
4
C A M I L L A S TA I N L E S S S T E E L
The Camilla seat is now available in 304 stainless steel with a
backrest and two arms either wholly stainless or with hardwood
slats. Dimensions: 1,560mm long, sit height 420mm, overall height
780mm, depth 565mm.
Camilla bench, Part code 37.760.8xx*
F I X I N G P L AT E F O R C A M I L L A
44
Description
37.759.000
anchor plate for Camilla bench
37.759.010
anchor plate for Camilla bench stainless
555
420
Part code
1560
1
1
C A MILL A PICNIC SET
CAMILLA PICNIC SET
Part code
Description
The seat and table top can be in either varnished hardwood or
37.793.800*
Camilla picnic set in impregnated pinewood
impregnated pine wood.
37.794.800*
Camilla picnic set in varnished hardwood
Dimensions: length 1,56mm, width 2,090mm (table
2
1,000x1,560mm), height 820mm.
Part code
Description
37.795.800*
Camilla table in impregnated pinewood
37.796.800*
Camilla table in varnished hardwood
The Camilla picnic set is an integrated table with two benches.
2
C A M I L L A TA B L E
A further element of the range is the Camilla table. Manufactured in
the same way as the rest of the family, the table is available in either
Dimensions: length 1,500mm, width 1,500mm, height 780mm.
3
CAMILLA CHAIR
Part code
Description
37.771.800*
Camilla chair in round 8 mm steel rod
37.772.800*
Camilla chair in impregnated pinewood
37.773.800*
Camilla chair in varnished hardwood
You can choose from 11 standard colours:
C A MILL A CHAIR
To complete the range a neat arm chair with sturdy backrest, ideal
RAL 1007, daffodil yellow
RAL 3000, fire red
on a patio or loggia where arrangements are the order of the day.
RAL 3005, wine red
RAL 4004, violet bordeaux
Available in round tube, hardwood or pine.
RAL 5013, cobalt blue
RAL 6009, pine green
Dimensions: width 660mm, depth 565mm, sit height 420mm,
RAL 6005, moss green
RAL 6029, mint green
overall height 780mm.
RAL 7016, anthracite grey
RAL 9005, deep black
RAL 9007, grey aluminium
Camilla chair, Part code 37.771.800
Camilla picnic set, Part code 37.79x.800
STREET FURNITURE: CAMILLA
varnished hardwood or impregnated pine wood.
3
C A M I L L A TA B L E
2090
565
1000 x 1560
780
820
660
1
2
3
3
45
STREET FURNITURE: NIAGRA
N I AG R A
N I AG R A
Part code
Description
Traditionally designed park seat manufactured to modern standards.
37.738.800*
Niagra seat, length 1,800 mm, with supports
With a reclined backrest, the Niagra seat is extremely relaxing and
powder coated in a standard RAL colour
ideal for open spaces and green areas where parents need a good sit
Niagra seat, length 2,400 mm, with supports
down!
37.739.800*
powder coated in a standard RAL colour
You can choose from 11 standard colours:
The seat comprises of a back supporting structure in laser cut 12 mm
RAL 1007, daffodil yellow
RAL 3000, fire red
thick steel and with a front and lower rim in flat steel section
RAL 3005, wine red
RAL 4004, violet bordeaux
measuring 80x5 mm. A flat steel plate measuring 80x3 mm is
RAL 5013, cobalt blue
RAL 6009, pine green
welded along the perimeter of seat and is necessary for the fastening
RAL 6005, moss green
RAL 6029, mint green
of the seating boards.
RAL 7016, anthracite grey
RAL 9005, deep black
RAL 9007, grey aluminium
The seat has hardwood seating boards with rounded corners,
measuring 40x40 mm positioned adjacent to each other to decrease
the spaces between each board to a minimum and therefore create
a pleasant continuation between seat and back.
WWW.FALCO.CO.UK
Overall dimensions:
Length 1,800-2,400 mm, height 840 mm, depth 760 mm.
840
Niagra, Part code 37.738.800
760
46
1800
1
1
M O N A R C H S I N G L E S I D E D S E AT
M O N A RC H S I N G L E S I D E D
The Monarch range takes the Niagra a stage further offering internal
Part code
Description
and external curves.
37.741.800*
Monarch seat, straight, height 810 mm,
length 1,800 mm
Single sided supported by strong steel back structures in 12 mm
thick laser cut steel. A steel plate measuring 80x3 mm is welded to
37.742.800*
Monarch seat, curvilinear, height 810 mm,
length 1,800 mm
the upper part supporting structure, and is required for the
37.744.800*
fastening of the seating boards. At the lower end of the back
Monarch seat, straight, height 810 mm,
length 2,400 mm
supporting structures are two rectangular steel plates measuring
200x120 mm and 12 mm thick.
37.745.800*
The seat has hardwood seating boards with rounded edges
37.747.800*
Monarch seat, curvilinear, height 810 mm,
length 2,400 mm
37.748.800*
Monarch seat, curvilinear, height 810 mm,
length 5,000 mm
therefore create a unique effect in merging the seat with the back.
2
M O N A RC H D O U B L E S I D E D
This model is available either straight (see picture) or curvilinear. The
Part code
Description
curvilinear model is available both with an external and internal
37.743.800*
Monarch seat, double sided length 1,800 mm
angle, and this is possible thanks to a particular method in the
37.746.800*
Monarch seat, double sided length 2,400 mm
seating board curving process.
37.749.800*
Monarch seat, double sided length 5,000 mm
2
M O N A R C H D O U B L E S I D E D S E AT
Specification as above but with the seating boards having a
* THERE ARE 11 STANDARD COLOURS AVAILABLE:
See details on opposite page.
continuous and flowing curvature.
Overall dimensions: height 810 mm, width 1,480 mm.
straight model
Part code 37.741.800* / 37.742.800*
curvilinear model
1800
1180
810
810
750
STREET FURNITURE: MONARCH
length 5,000 mm
measuring 40x40 mm and positioned next to one another so as to
decrease the spaces between each stave to a minimum and
Monarch seat, straight, height 810 mm,
1660
1
2
47
2
STREET FURNITURE: MARS AND VENUS
1
2
1
MARS
THE PLANETS
Part code
Description
The Mars and Venus benches are very attractive modular seating
37.740.800*
Mars bench without back, per metre
systems with a robust and distinctive frame design. Perfect for trails,
96.016.086
(minimum 2,000mm),
paths or promenades where a short breather is required before you
supports powder coated in RAL
continue your walk, or there’s a view well worth a stop.
concrete foot 300x300x200 mm (1 needed per
All steel parts are hot dip galvanised and polyester powder coated in
support)
2
a choice of 11 standard colours. Supports are designed to be bolted
VENUS
to a concrete pad or concrete feet are available. Price is per m.
Part code
Description
37.719.800*
Venus bench without back, per metre
1
(minimum 2,000mm),
96.016.086
MARS
supports powder coated in RAL
The Mars seat is a straight bench with laser cut trapezoidal supports
concrete foot 300x300x200 mm (1 needed per
12mm thick spaced 1,000mm apart.
Supports have pierced hole design. Seat is manufactured from 7
support)
Iroko hard wood slats.
*You can choose from 11 standard colours:
RAL 1007, daffodil yellow
RAL 3000, fire red
RAL 3005, wine red
RAL 4004, violet bordeaux
RAL 5013, cobalt blue
RAL 6009, pine green
RAL 6005, moss green
RAL 6029, mint green
RAL 7016, anthracite grey
RAL 9005, deep black
2
VENUS
The Venus seat is the curved sister of the Mars bench with identical
laser cut trapezoidal supports 12mm thick spaced 1,000mm apart.
Supports have pierced hole design.
Seat is manufactured from 7 Iroko hard wood slats.
RAL 9007, grey aluminium
Mars, Part code 37.740.800
420
50
470
40
40
1000
48
1000
FA LC O Z I N N I A
FA LC O Z I N N I A
The FalcoZinnia is a new design from Falco linked to the ‘design for
Part code
Description
all’ philosophy. The FalcoZinnia is primarily targeted at an older
31.800.000
FalcoZinnia starter or end support
audience, something which is reflected in the slightly higher seat
31.801.000
FalcoZinnia intermediate support
height and the radius in the backrest - both which improve seating
FalcoZinnia seat element with back support
comfort.
on the inside (external)
The naturally curved shape of the bench also helps groups of people
31.803.023
communicate, plus it also possible to position additional arms, to aid
rising from the seat. The seat offers space for approximately three
FalcoZinnia seat element with back support on the
outside (internal)
31.804.000
FalcoZinnia arm support
people.
The sit height of the bench is 470mm with a depth of 400mm.
continuous run can be created with a standard FalcoZinnia seating
The outside radius is 2,400mm and is approximately 45°.
elements of 45° and people can sit congregationally together
The arm supports are 45mm wide.
(internal radius) or with some privacy (external radius). The use of
intermediate supports enables the two variants to be connected
The FalcoZinnia is equipped with FSC certified hardwood slats, all
easily and the creation of many combinations and styles.
steelwork is hot dip galvanised to BS EN ISO1461 and can be
By using 8 seating element a complete circle is created.
powder coated in any of the 192 RAL colours.
FalcoZinnia, Part code 31.800.000
The mark of responsible forestry.
715
CU-COC-008530
©1996 Forest Stewardship Council
470
680
400
S T R E E T F U R N I T U R E : FA L C O Z I N N I A
The design offers both internal and external curves so that a
2000
49
S T R E E T F U R N I T U R E : FA L C O S Y S T E M S T E E L
FA LC O S Y S T E M S T E E L
FA LC O S Y S T E M S T E E L
Part code
Description
The FalcoSystem is the ultimate in flexible seating. A very simple yet
30.551.130
FalcoSystem bench without back, 90° element,
very effective seating system where you can contour your own line
diam. 2000 mm
to follow or highlight a natural or man-made curve. Available with
FalcoSystem bench without back, 60° element,
or without a backrest.
30.553.130
diam. 3000 mm
30.555.130
30.557.130
FalcoSystem bench without back, 45° element,
The system is manufactured from a cylindrical leg which is either
diam. 4000 mm
surface mounted or fixed below ground. This then supports the
FalcoSystem bench without back, 36° element,
sub-frame of the seat which is manufactured from pre-fabricated
diam. 5000 mm
elements. The seating is hardwearing Kambala hardwood fastened
30.561.130
FalcoSystem bench with back on outside,
to the sub-frame.
30.563.130
FalcoSystem bench with back on outside,
The overall dimensions of an element are 1,570mm. All steel parts
60° element, diam. 3000 mm
are all hot dip galvanised to BS EN ISO 1461. Backrest can be fitted
FalcoSystem bench with back on outside,
internally or externally. The curved seat elements are available in 4
45° element, diam. 4000 mm
standard dimensions: 90º, 60º, 45º, or 36º, giving standard
FalcoSystem bench with back on outside,
diameters of 2,000m, 3,000mm, 4,000mm or 5,000mm overall.
36° element, diam. 5000 mm
The seat and legs are delivered separately.
90° element, diam. 2000 mm
30.565.130
30.567.130
30.571.130
FalcoSystem bench with back on inside,
90° element, diam. 2000 mm
30.573.130
Part code 30.561.130
FalcoSystem bench with back on inside,
90°
60° element, diam. 3000 mm
30.575.130
FalcoSystem bench with back on inside,
45° element, diam. 4000 mm
30.577.130
FalcoSystem bench with back on inside,
0
45
36° element, diam. 5000 mm
30.550.030
FalcoSystem steel tubing Ø 100 mm, with foot
300
410
45
plate 180x180 mm, 300 mm below ground level
200
50
FA LC O S Y S T E M C O N C R E T E
FA LC O S Y S T E M C O N C R E T E
The FalcoSystem concrete version is similar to its sister range in steel
Part code
Description
but with concrete footings and supports. A great complementary
34.124.150
FalcoSystem round bench element 60° without
back, diameter 1950/2850 mm
range where a tougher looking product is required or where the
predominant material is aggregate or concrete. The range is also
34.125.070
FalcoSystem round seat element 60° with back
inside, diameter 1950/2850 mm
available with or without a backrest.
34.126.060
outside, diameter 1950/2850 mm
The concrete elements are cast as a single item and include the
fixing brackets. The seating elements are treated Kambala
34.131.150
34.132.070
FalcoSystem round seat element 60° with back
34.133.060
FalcoSystem round seat element 60° with back
outside, diameter 2550/3450 mm
450mm.
34.161.150
back, diameter 5150/6050 mm
For the curved elements, you can choose from 10 different radii
(inside and outside diameter respectively): 1,000/1,900mm (90º),
34.162.070
FalcoSystem round seat element 30° with back
inside, diameter 5150/6050 mm
1,550/2,450mm (60º), 3,150/4,050mm (45º), 3,850/4,750mm
34.163.060
(45º) and 6,150/7,050mm (30º).
FalcoSystem round bench element 30° without
FalcoSystem round seat element 30° with back
outside, diameter 5150/6050 mm
Hence there is creative freedom with almost unlimited possibilities.
34.291.070
FalcoSystem straight seat element with back,
length 1250 mm
Concrete elements require crane lifting and therefore access to site.
34.292.150
FalcoSystem straight bench element without back,
length 1600 mm
34.293.070
FalcoSystem straight seat element with back,
length 1600 mm
Part code 34.101.150
34.294.150
FalcoSystem straight bench element without back,
length 2000 mm
45
34.295.070
450
length 2000 mm
34.297.000
°
425
90
FalcoSystem straight seat element with back,
anchor set
S T R E E T F U R N I T U R E : FA L C O S Y S T E M C O N C R E T E
inside, diameter 2550/3450 mm
necessary when connecting multiple elements as the elements are
pre-mounted. Dimensions: sit height is 425mm and seat depth is
FalcoSystem round bench element 60° without
back, diameter 2550/3450 mm
hardwood. All elements can be connected to each other, when using
a single item then an additional anchor set is required, though not
FalcoSystem round seat element 60° with back
400
51
S T R E E T F U R N I T U R E : FA L C O C O R T E N
1A
1A
FA LC O C O R T E N
1
FA LC O C O R T E N
Part code
Description
The FalcoCorten is a new design of chair combining the rich textures
31.070.121
FalcoCorten chair
of corten steel with traditional FSC hardwood.
96.102.235
concrete foot 30x30x30 cm
Developed in the US and used on the famous Chicago Picasso
FalcoCorten table
sculpture, cor-ten is process of weathering steel to give it a rustic
31.075.121
iron-oxide like appearance.
Designed by Anita Ebbing, the FalcoCorten chair has a natural and
comfortable curve for a very relaxing sit.
01538-380080
The main structure of the chair is manufactured from corten steel
with the seat and backrest in hard wood slats so that it is robust,
durable and low maintenance to ensure maximum appeal for
many years.
N.B.
A table is now also available for this design - call
The seat is bolt down and we can supply an optional concrete foot if
Technical Sales for details (photo’s 1A).
required for asphalt or park surfaces.
FalcoCorten table, Part code 31.075.121
FalcoCorten chair, Part code 31.070.121
460
700
577
1060
484
750
904
22
700
1000
52
376
1
1
M O D U LO S E AT I N G S Y S T E M
M O D U LO S E AT I N G S Y S T E M
The Modulo seating system is an ingeniously designed modular
Part code
Description
seating system which enables any combination of curves and lines
37.700.800*
Modulo seating system with back support,
without supports, bench length 141,5cm,
(internal or external) to create the ultimate seating design.
3-seated, powdercoated in RAL
Available as a beautiful combination of stainless steel and wood or
37.701.800*
using steel rods for a more robust appearance.
Modulo seating system with back support,
without supports, bench length 81,5cm,
2-seated, powdercoated in RAL
This system is made up of different benches, with or without back,
37.702.800*
which makes an overall shown in the pictures. The seating and back
Modulo seating system without supports,
bench length 141,5cm, 3-seated,
are tubes about 8 mm. The seatings are connected to each other
37.703.800*
By these round elements are many versions possible, with corners
Modulo seating system without supports,
bench length 81,5cm, 2-seated,
from 0 until 60 degrees.
powdercoated in RAL
1
37.706.800*
M O D U LO, G A LVA N I S E D
Modulo bench support for seating system with
a welded base plate of round 250mm at ground
The bench supports are of tubes round 102 mm and have on the
level, powdercoated in RAL
upside a table sheet round 45 mm. The support are available with
37.707.800*
round foot plate or to concrete in.
Modulo support for seat element, for in-ground
fix, powdercoated in RAL
The bench elements are available in a length of 815 mm and 1415
You can choose from 11 standard colours:
mm. The back is always ca. 200 mm smaller. The Modulo requires
RAL 1007, daffodil yellow
RAL 3000, fire red
assembly following delivery.
RAL 3005, wine red
RAL 4004, violet bordeaux
1x Part code 37.700.800* + 2x Part code 37.706.800*
RAL 6009, pine green
RAL 6029, mint green
RAL 7016, anthracite grey
RAL 9005, deep black
RAL 9007, grey aluminium
630
1206
RAL 5013, cobalt blue
RAL 6005, moss green
2
M O D U LO, S TA I N L E S S S T E E L
In addition to the powder coated version the beautiful stainless steel
428
2120
STREET FURNITURE: MODULO
powdercoated in RAL
through round elements and create an extra seating or table.
Ø450
version with hardwood slats is a stunning addition to the range.
With naturally finished materials this version looks great in any
context.
1
2
1
53
1
3
S T R E E T F U R N I T U R E : FA L C O PA R K
3
2
2
1
FA LC O PA R K H A R DWO O D
1
FA LC O PA R K H A R DWO O D
Part code
Description
The FalcoPark is a heavy, solid traditional park bench made of
34.000.010
FalcoPark seat with backrest, below ground fix
wood and concrete. With a backrest as standard, the feet are
34.000.410
Optional concrete in red / brown, below ground
manufactured from solid concrete 100mm thick for rigidity and
34.001.020
FalcoPark seat with backrest, freestanding
strength.
34.001.410
Optional concrete in red / brown, freestanding
2
The wooden slats and backrest are manufactured from Kambala
hard wood 45mm thick. The bench is delivered in flat pack form for
FA LC O PA R K S T E E L M E S H
erection on site.
Part code
Description
34.501.018
FalcoPark seat in mesh, below ground fix
34.501.700
additional charge for powdercoating in RAL colour
34.502.018
FalcoPark seat in mesh, freestanding
for those areas where wood is not the required material. Available as
34.502.700
additional charge for powdercoating in RAL colour
a table, or bench with or without a backrest, the range has concrete
34.505.018
FalcoPark table in mesh, below ground fix
feet 85mm thick for rigidity.
34.505.700
additional charge for powdercoating in RAL colour
To give the products a fresh and modern look, the steel parts can be
3
2
FA LC O PA R K S T E E L M E S H
The FalcoPark bench is also available with a galvanised steel mesh
additionally polyester powder coated in any of the 192 RAL colours.
FA LC O PA R K TA B L E A N D B E N C H
All parts are delivered palletised.
Part code
Description
34.501.011
FalcoPark seat with backrest, below ground fix
34.502.011
FalcoPark bench, freestanding
34.505.011
FalcoPark table hardwood, below ground fix
Length 1,830mm.
3
FA L C O PA R K TA B L E A N D B E N C H
This simple and straightforward range also has a solid table and
bench without a back. A great unobtrusive design ideal for those
utilitarian areas where the provision of an eating area is required
The mark of responsible forestry.
using solid furniture.
CU-COC-008530
Using FSC certified hardwood, the table is 1,950mm long x 700mm
©1996 Forest Stewardship Council
wide.
Part code 34.000.010
Part code 34.501.018
1828
1950
190
390
700
1100
450
1095
40
819
190
460
54
250 100
1250
100 250
550
1292
FA LC O F O R E S T
FA LC O F O R E S T
The FalcoForest is a beautiful range of outdoor park furniture,
manufactured from solid Douglas Red Fir. The wood is vacuum
Part code
Description
32.600.004
FalcoForest with 2 seat and 2 back slats,
freestanding
impregnated with a preservative for a long life span. Perfect for
picnic areas and parks, the FalcoForest blends naturally with any
32.600.014
FalcoForest with 2 seat and 2 back slats,
below ground fix
green surroundings.
32.601.004
freestanding
The seats and table are 1,950mm long with 45mm thick slats. Plus
there are a wide range of options with this product group including
32.601.014
FalcoForest with 3 seat and 2 back slats,
below ground fix
different mounting possibilities.
32.601.004
Part code 32.601.004
FalcoForest with 3 seat and 2 back slats,
freestanding
32.601.014
FalcoForest with 3 seat and 2 back slats,
32.602.104
FalcoForest bench with 3 seat slats, freestanding
32.602.114
FalcoForest bench with 3 seat slats, below
ground fix
440
440
800
800
below ground fix
600
32.604.004
FalcoForest table with 4 table slats, freestanding
32.604.014
FalcoForest table with 4 table slats,
500
below ground fix
600
Part code 32.602.104
Part code 32.602.114
380
Part code 32.604.004
Part code 32.604.014
600
600
426
710
710
380
500
650
500
426
S T R E E T F U R N I T U R E : FA L C O F O R E S T
Part code 32.600.014
FalcoForest with 3 seat and 2 back slats,
415
650
55
2
S T R E E T F U R N I T U R E : FA L C O S WAY
1
2
1
FA LC O S WAY B E N C H
FA LC O S WAY
Part code
Description
FalcoSway is a range of seating which combines the utilitarian styles
31.050.121
FalcoSway bench with 2 hardwood slats
of park benches with a galvanised steel frame.
31.050.700
additional charge for powdercoating
In contrast to the FalcoPark and FalcoForest ranges, the FalcoSway
steel construction in a RAL colour
has a much lighter and more urban feel.
31.051.121
FalcoSway bench with 3 hardwood slats
31.051.700
additional charge for powdercoating
steel construction in a RAL colour
2
FA LC O S WAY B E N C H
The FalcoSway bench is one of the most economical products in
the Falco range. A simple and straightforward design the seat is still
FA LC O S WAY WA L L B E N C H
robust and functional. The chunky steel supports 40mm thick wood
Part code
Description
31.900.000
FalcoSway bench support, single
31.900.700
additional charge for powdercoating
slats are FSC certified hardwood and the all the steelwork is hot dip
steel construction in a RAL colour
31.980.001
1
FSC Hardwood slat 1,950x120x40mm untreated
galvanised to BS EN ISO 1461. Options include either 2 or 3 wooden
seat slats. The supports are 1,500mm apart and the bench overall
is 1,950mm long, the sit height is 430mm. Additionally the steel
elements can be polyester powder coated. To be assembled on site.
2
FA L C O S WAY WA L L B E N C H / S E AT
This is the wall mounted version of the FalcoSway range, where
The mark of responsible forestry.
floor mounting is not an option or wall mounting is preferred. The
CU-COC-008530
the same support simply mounted upside down. Manufactured from
©1996 Forest Stewardship Council
robust 60mm box section and FSC certified hardwood, the seats are
ingenious design allows for with or without a backrest – by using
1,950mm long. Again all steelwork is hot dip galvanised and can be
powder coated if required. Delivery is in parts.
FalcoSway wall bench with 1 back part
120
Part code 31.050.121
1950
1950
400
428
440
780
40
260
50
340
380
56
1500
275
1410
275
1
1
FA L C O S WAY S E AT S I N G L E
The FalcoSway seat is a simple design with two individual steel
supports. The bench is equipped with 3 hardwood sitting slats
FA LC O S WAY S E AT S I N G L E
Part code
Description
31.001.011
FalcoSway seat single backrest,
seat length 1,950mm, weight 50kg
40mm thick and a single wood backrest, all in FSC certified
hardwood.
31.001.700
The steel parts are hot dip galvanised and the seat is 1,950mm long
2
with a sit height of 450mm.
Part code
additional charge for powdercoating
steel construction in a RAL colour
FA LC O S WAY S E AT D O U B L E
Description
31.022.001
FalcoSway seat double backrest,
seat length 1,950mm, weight 60kg
2
additional charge for powdercoating
steel construction in a RAL colour
This is a more sturdy version of the seat with a backrest and an
angled seating area. Additionally the seat has two slats for the
31.025.001
backrest making it more substantial. The supporting structure is
31.025.700
manufactured from 50mm galvanised steel box section.
FalcoSway table with 6 FSC hardwood slats
additional charge for powdercoating
steel construction in a RAL colour
The double seat version is also available as a table,1,400mm x
730mm, using the same construction as the seat. The seat is
The mark of responsible forestry.
1,950mm long and all the wood slats are FSC certified hardwood,
CU-COC-008530
40mm thick.
©1996 Forest Stewardship Council
Part code 31.022.001
Part code 31.001.012
595
1950
1410
270
270
1950
S T R E E T F U R N I T U R E : FA L C O S WAY
31.022.700
FA L C O S WAY S E AT D O U B L E
40
441
400
793
1085
895
40
400
275
1400
275
400
200
650
1410
1
2
2
57
2
1
1
S T R E E T F U R N I T U R E : FA L C O S W I N G
4
3
1
FA LC O S W I N G S E AT
FA LC O S W I N G
Part code
Description
The FalcoSwing is a really beautifully designed product. This series of
31.762.001
FalcoSwing seat with back support,
benches from Falco is supplied in many variations, allowing a wide
seat made of untreated FSC certified wood
variety of arrangements.
31.763.101
31.76x.751
2
FalcoSwing extension seat with back support,
seat made of untreated FSC certified wood
All benches are supplied pre-assembled and feature a sturdy steel
additional charge for powdercoating steel
structure which is hot-dip galvanised.
construction in a RAL colour
The seats are made of FSC certified hardwood. The steel structure
FA LC O S W I N G B E N C H
Part code
Description
31.760.101
FalcoSwing bench without back support,
made of untreated FSC certified wood
31.761.101
FalcoSwing extension bench without back support,
made of untreated FSC certified wood
31.76x.7xx
additional charge for powdercoating steel
construction in a RAL colour
3
FA LC O S W I N G , S Q AU R E A R R A N G E M E N T
Part code
Description
31.764.101
FalcoSwing bench in a square arrangement,
can also be given a powdercoating in many standard RAL colours.
In theory, FalcoSwing benches can be placed anywhere. They can
resist all weathers and are also vandal-resistant because of the
absence of any visible nuts or bolts on the seat or back-rest.
Modular construction makes many arrangements possible:
free-standing benches with or without back support, free-standing
benches in a square arrangement or, if required, a hexagonal
arrangement.
The various components mean that any square or park can be
equipped with a swing bench, with or without back support.
4x3 seat components of untreated FSC hardwood
31.765.001
FalcoSwing seat with back in a square
arrangement, 4x3 seat components of untreated
FSC hardwood
31.76x700
additional charge for powdercoating steel
construction in a RAL colour
4
FA LC O S W I N G , H E X AG O N A L A R R A N G E M E N T
Part code
Description
31.766.101
FalcoSwing bench in a hexagonal arrangement,
Every FalcoSwing bench has a sit height of 430 mm. The height
of the round side or intermediate supports are 600 mm. A bench
including a backrest has a total height of 780 mm.
With a straight bench the length from support to support is 1,800
mm. The square version is 1,600x1,600 mm externally.
The hexagonal form has a maximum external width of 2,600 mm.
Please ask for more drawings.
6x3 seat components of untreated FSC hardwood
31.767.001
FalcoSwing seat with back support in a
The mark of responsible forestry.
hexagonal arrangement, 6x3 seat components of
31.76x700
untreated FSC hardwood, pre-assembled
CU-COC-008530
additional charge for powdercoating steel
©1996 Forest Stewardship Council
construction in a RAL colour
58
1
FA L C O S W I N G H E X AG O N A L TA B L E
1
FA LC O S W I N G H E X AG O N A L TA B L E
The FalcoSwing hexagonal table has been designed to match the
Part code
hexagonal FalcoSwing bench arrangement to create a perfect picnic
31.785.021
FalcoSwing hexagonal table without ashtray,
bolt down
experience. Designed with the same robust steel and FSC hardwood,
31.785.031
the table has an optional ashtray.
Description
FalcoSwing hexagonal table with ashtray,
below ground fix
Height 780mm from base plate or 795mm for below ground fix.
31.785.7x1
additional charge for powdercoating steel
construction in a RAL colour
2
FA LC O S W I N G S TA N D I N G TA B L E
Part code
Description
manufactured from FSC hardwood to blend with the seating range,
31.786.021
FalcoSwing standing table without ashtray,
31.786.031
FalcoSwing standing table without ashtray,
31.786.041
FalcoSwing standing table with ashtray, bolt down
31.786.051
FalcoSwing standing table with ashtray below
31.786.7x1
additional charge for powdercoating steel
with removable ashtray.
bolt down
With a galvanised steel frame, the table’s total height is 1,100mm
from base plate.
below ground fix
3
FA LC O S W I N G P I C N I C TA B L E
The FalcoSwing picnic table is an integral and table unit with 6 seats
ground fix
developed from the FalcoSwing range.
construction in a RAL colour
With optional integral ashtray, the bar table is ideal for families to
perch whilst having a snack. Strong and robust it can be placed in
cafes or remote woodland trails.
Height 1,125mm from base plate.
4
3
FA LC O S W I N G P I C N I C TA B L E
Part code
Description
31.788.021
FalcoSwing picnic table without ashtray and
31.788.721
additional charge for powdercoating steel
six integral seats
construction in a RAL colour
FA L C O S W I N G R E C TA N G U L A R TA B L E
To complete the set, here is a rectangular table in two sizes;
1500mm x 570mm or 1,950mm x 570mm.
The mark of responsible forestry.
4
FA LC O S W I N G R E C TA N G U L A R TA B L E
Part code
Description
31.780.001
FalcoSwing rectangular table 1,500mmx570mm
31.781.001
FalcoSwing rectangular table 1,950mmx570mm
31.78x.700
additional charge for powdercoating steel
S T R E E T F U R N I T U R E : FA L C O S W I N G
FA LC O S W I N G S TA N D I N G TA B L E
The FalcoSwing standing table is the standard hexagonal shape
2
construction in a RAL colour
CU-COC-008530
©1996 Forest Stewardship Council
3
1
2
1
4
59
2
S T R E E T F U R N I T U R E : FA L C O R U B O
1
1
1
FA LC O R U B O S E AT W I T H B AC K R E S T
1
FA LC O R U B O S E AT
Part code
Description
Attractively styled bench from the successful FalcoRubo series.
38.432.001
FalcoRubo with back support, seat with base plate
A combination of styling and sturdiness.
38.432.700
additional charge for powdercoating
38.438.001
steel construction in a RAL colour
Supports made of 60 mm tubing, hot-dip galvanised. Seat made of
FalcoRubo with back support, seat on 200x100
60 mm thick FSC certified hardwood.
mm base plate at least 150 mm below
The length is 2,010 mm.
ground level
38.438.700
additional charge for powdercoating
2
steel construction in a RAL colour
2
FA LC O R U B O S C H O O L B E N C H
A bench especially designed for secondary schools, which
FA LC O R U B O SC H O O L B E N C H
undoubtedly will also be used at bus stops, stations, neighbourhood
Part code
Description
38.450.002
FalcoRubo school bench, tube 47,5 mm, seat
38.450.700
additional charge for powdercoating
shopping centres etc.
with FSC certified hardwood planks 45x180 mm
Secondary schoolchildren like to sit a bit higher than normal in order
to be able to get a good view of the situation.
steel construction in a RAL colour
The school bench is made of thick-wall 47.5 mm tubing and curved
and welded into a single unit. Length 1,500 mm.
Seat is made of FSC certified hardwood.
The mark of responsible forestry.
CU-COC-008530
N.B.
Co-ordinating street furniture products also available.
©1996 Forest Stewardship Council
FalcoRubo seat, Part code 38.438.001
FalcoRubo School bench, Part code 38.450.002
1500
420
420
1950
60
160
320
150
440
800
750
300
1
1
FA LC O R U B O B E N C H
FA LC O R U B O B E N C H
The FalcoRubo series of park furniture was designed by the well
Part code
Description
known Dutch designer Ruud van den Bosch and the bench is a
38.411.001
FalcoRubo bench without back support, supports
with base plate 150 mm below ground level
lesson in simplicity. The supporting tubes have an effortless line
rising from the ground to a 90° angle to form the seat bracketry.
38.411.700
additional charge for powdercoating
steel construction in a RAL colour
The supports are manufactured from robust 60mm tube and the FSC
38.412.001
with 180x180x10 mm base plate at ground level
hardwood slats also from matching 60mm thick boards.
All steelwork is hot dip galvanised to BS EN ISO 1461 and can
38.412.700
2
FA LC O R U B O B E N C H W I T H B AC K R E S T
Part code
Description
38.401.001
FalcoRubo bench with back support, supports with
38.401.700
additional charge for powdercoating
simple bench, with the addition of two rising tubes and a backrest to
match the seat.
base plate 150 mm below ground level
steel construction in a RAL colour
3
FA L C O R U B O P I C N I C TA B L E
38.402.001
FalcoRubo bench with back support, supports with
38.402.700
additional charge for powdercoating
A graceful extension of the FalcoRubo design is this perfectly
180x180x10 mm base plate at ground level
proportioned picnic table and benches.
A simple sweeping curve coupled with routed wooden table slats
steel construction in a RAL colour
housed into the framework make the picnic table a beautiful modern
3
design.
Part code
Description
38.425.001
FalcoRubo picnic set supports of tube
N.B.
FA LC O R U B O P I C N I C TA B L E
Co-ordinating street furniture products also available.
round 60 mm, freestanding, width 1,660 mm
38.425.700
additional charge for powdercoating steel
S T R E E T F U R N I T U R E : FA L C O R U B O
FA L C O R U B O B E N C H W I T H B AC K R E S T
The FalcoRubo bench with backrest is a natural extension of the
additional charge for powdercoating steel
construction in a RAL colour
subsequently be powder coated in any of the 192 RAL colours.
2
FalcoRubo bench without back support, supports
construction in a RAL colour
FalcoRubo seat, Part code 38.401.001
870
315
440
The mark of responsible forestry.
150
CU-COC-008530
1950
©1996 Forest Stewardship Council
140
1
2
3
61
2
S T R E E T F U R N I T U R E : FA L C O N O R S K
3
1
1
FA LC O N O R S K S E AT
FA LC O N O R S K
Part code
Description
We are delighted to present the FalcoNorsk park furniture series,
38.000.001
FalcoNorsk seat with backrest,
a design which meets the latest requirements of today in terms of
2,000x650x800mm
design and quality. The products are a response to the increasing
additional charge for powdercoating
demand for modern park furniture for use in public areas, in urban,
steel construction in a RAL colour
rural and marine environments. The furniture blends well with
38.000.700
2
FA LC O N O R S K B E N C H
architecture from any period.
Part code
Description
38.005.001
FalcoNorsk bench without backrest,
The framework is manufactured from a robust welded construction
2,000x650x800mm
of Ø60mm tubular steel and finished using high quality hardwood
additional charge for powdercoating
slats from FSC certified sources. The furniture is designed for both
steel construction in a RAL colour
freestanding as well as bolt down – with an anchoring hole.
38.005.700
3
FA LC O N O R S K TA B L E
Part code
All steel work is hot dip galvanised to BS EN ISO 1461 and can be
Description
38.010.001
FalcoNorsk table, 2,000x920x650mm
38.010.700
additional charge for powdercoating
powder coated in any of the 192 RAL colours. The seat slats and
table top are manufactured from 40mm thick FSC hardwood.
steel construction in a RAL colour
4
FA LC O N O R S K A N C H O R I N G S L E E V E S
Part code
Description
38.098.000
anchoring sleeve for Ø60mm tube, with base plate
110x5mm, 150m below ground level
38.098.700
The mark of responsible forestry.
CU-COC-008530
©1996 Forest Stewardship Council
additional charge for powdercoating
steel construction in a RAL colour
1600
440
800
FalcoNorsk seat, Part code 38.000.0001
590
62
1940
A R P S E AT I N G S Y S T E M
A R P S E AT I N G S Y S T E M
Arp is a very stylish seating system from our partners at City Design
On request
in Italy. This is a truly design led product offering incredible style
You can choose from 8 standard colours:
coupled with sound ergonomics in terms of the sitting experience
RAL 9010, Pure White
RAL 6005, Moss Green
plus the usability of the design.
RAL 1007, Daffodil Yellow
RAL 5013, Cobalt Blue
RAL 3001, Signal Red
RAL 9007, Grey Aluminium
RAL xxxx, Acid Green
RAL 9005, Jet Black
Arp is a modular seating system ideal for any modern urban
environment – shopping centres and malls, airports, railway and
bus stations, conference centres, in fact any large modern scheme
where high quality mass seating is required in a different number of
The seating element is manufactured from hard wearing die-cast
aluminium and supported on robust steel framework. There are
both single and double sided options plus a really user friendly table
system to aid wheelchair users.
The Arp system is delivered powder coated in any of 8 standard RAL
colours.
Arp seating system
1800
350
760
1500
S T R E E T F U R N I T U R E : A R P S E AT I N G S Y S T E M
orientations and quantities.
1600
RAL 9010
RAL 1007
RAL 3001
Acid Green
RAL 6005
RAL 5013
RAL 9007
RAL 9005
63
2
S T R E E T F U R N I T U R E : FA L C O P E R F O
1
3
1
FA LC O P E R F O S I N G L E S E AT
FA LC O P E R F O S E R I E S
Part code
Description
FalcoPerfo is a very traditional Falco design and a stalwart of the
36.001.006
FalcoPerfo single-sided seat
Falco collection. Robust and utilitarian with a high resistance to
36.001.700
additional charge for powdercoating in
vandalism, the FalcoPerfo series fits anywhere.
a RAL colour
2
1
FA LC O P E R F O S I N G L E S E AT W I T H F SC S L AT S
Part code
Description
36.005.121
FalcoPerfo with FSC slats, single-sided seat
36.005.700
additional charge for powdercoating steel
Ø 38 mm with mild-steel strip. Seat made of 2 mm thick perforated
steel plate with 25x6 mm slotted holes in a zigzag formation.
The ideal bench for positioning in, for example, places which suffer
construction in a RAL colour
3
from vandalism.
FA LC O P E R F O D O U B L E S E AT
Part code
FA LC O P E R F O S I N G L E S E AT
These hot-dip galvanised park benches are made of a tubing frame
Dimensions: length 1,800 mm, width 760 mm, height 825 mm.
Description
36.030.006
FalcoPerfo double-sided seat
36.030.700
additional charge for powdercoating in
This alternative to the perforated seat uses the same side and
a RAL colour
supporting frames. Flat steel strips that are welded to the tubing
4
2
FA LC O P E R F O A N C H O R I N G S L E E V E S
FA L C O P E R F O S I N G L E S E AT W I T H F S C
of the side frames support the FSC certified hardwood slats of
Part code
Description
55x25 mm.
36.375.000
anchoring sleeve on 80x50 mm base plate,
The slats go smoothly in the frame work.
155 mm below ground level
3
36.375.010
anchoring sleeve on 80x50 mm base plate at
ground level
With this model two seats are welded onto two uprights with a
36.376.000
set of 4 anchoring corners
profiel of 80 mm in the middle. The uprights have a welded base
FA LC O P E R F O D O U B L E S E AT
plate of 300x300 mm on 150 mm below ground level.
FalcoPerfo single bench, art.nr. 36.001.006
The mark of responsible forestry.
CU-COC-008530
425
825
©1996 Forest Stewardship Council
770
64
1800
1
1
FA L C O P E R F O P I C N I C TA B L E
FA LC O P E R F O P I C N I C TA B L E
The picnic set seats 8 people and comprises of two benches without
Part code
Description
back support and a table.
36.051.006
FalcoPerfo picnic set for 8 persons
The picnic set is 1,800 mm long.
36.051.700
additional charge for powdercoating in
a RAL colour
A perforated steel plate is welded into the tubing frame.
2
This creates a completely contemporary unit.
Part code
2
FA LC O P E R F O B E N C H
A modest though functional seat solution you can have by choosing
FA LC O P E R F O B E N C H W I T H O U T B AC K
Description
36.054.106
FalcoPerfo bench without back, length 1,800 mm
36.054.700
additional charge for powdercoating in
a RAL colour
3
Together with a table and a bench with backrest you can create a
fine picnic set.
Also, look at the accompanying litter bin on page 93.
FA LC O P E R F O TA B L E
Part code
Description
36.056.006
FalcoPerfo table
36.056.700
additional charge for powdercoating in
S T R E E T F U R N I T U R E : FA L C O P E R F O
our perforated bench without backrest.
a RAL colour
3
FA LC O P E R F O TA B L E
In order to obtain a picnic set from loose parts we offer you this
4
table with a perforated steel surface.
Part code
Description
It goes well with the bench with and without backrest.
36.375.000
anchoring sleeve on 80x50 mm base plate,
FA LC O P E R F O A N C H O R I N G S L E E V E S
155 mm below ground level
The advantage of perforated steel is that rain or snow will fall
36.375.010
through easily so they are dry and usable quickly.
anchoring sleeve on 80x50 mm base plate at
ground level
Dimensions: 600mm width x 1800mm long.
36.376.000
750
FalcoPerfo bench without back,
FalcoPerfo table,
Part code 36.054.106
Part code 36.056.006
440
440
740
FalcoPerfo picnic table,
Part code 36.051.006
set of 4 anchoring corners
Ø38x2,5
350
600
1485
1
2
3
65
2
STREET FURNITURE: DESIGN 5000
1
D E S I G N 5 0 0 0 S E AT I N G S Y S T E M
D E S I G N 5 0 0 0 S E AT I N G S Y S T E M
Part code
Description
With the Design 5000 we have extended our range with multilateral
35.501.800*
seat for straight version
furniture with an attractive and timeless design.
35.511.800*
seat for inner circle, 30°
An important thought behind the design is the possibility to combine
35.521.800*
seat for outer circle, 30°
different variations to put in a row. Because of this you can
35.531.800*
arm rest
harmonize this product with the available environment.
35.541.800*
single-sided bench console
35.542.800*
double-sided bench console
35.551.800*
cross tie-bar without footing, for straight seat
35.552.800*
cross tie-bar with footing, for straight seat
35.561.800*
cross tie-bar for inner circle without footing
Because of the many possibilities the Design 5000 is presented as a
35.562.800*
cross tie-bar for inner circle with footing
modular system where every part is available separately.
35.571.800*
cross tie-bar for outer circle without footing
Because of the possible arm-rests between the seating elements you
35.572.800*
cross tie-bar for outer circle witht footing
create separate seats without losing the look of a bench with the
35.591.800*
cover cap for bench console
Design 5000.
35.595.800*
ground anchor as contra for footing
An arrangement with bench elements either in a straight or curved
line, single-sided or double-sided. With the Design 5000 almost
every wish can be fulfilled.
Even S-turns are no problem with Design 5000.
The Design 5000 can be used both indoors or outdoors. The steel
You can choose from 12 standard colours:
RAL 3003, ruby red
RAL 7032, pebble grey
RAL 3005, wine red
RAL 8019, grey brown
RAL 5000, violet blue
RAL 9005, jet black
RAL 5022, night blue
RAL 9010, pure white
RAL 6009, fir green
RAL 9006, white aluminium
RAL 7022, umbra grey
RAL 9007, grey aluminium
Design 5000, 3 seat for inner circle
parts are very well protected because of galvanisation and a powder
coating layer in a standard colour.
The whole construction is very robust with the flat steel sections
combined with formed wire of 4 mm, 5 mm and 6 mm respectively.
1350
850
470
2170
66
850
1
D E S I G N 5 0 0 0 S E AT I N G E L E M E N T S U P P O R T S
D E S I G N 5 0 0 0 S E AT I N G E L E M E N T S
With wall brackets you can fix the bench consoles to a wall.
Part code
Description
A traverse then is not necessary.
35.590.800*
wall bracket
To obtain a mobile version we can supply single- and double-sided
35.580.800*
mobile support for single-sided bench
footings.
35.581.800*
mobile support for double-sided bench
35.585.800*
mobile support for inner circle single-sided bench
35.586.800*
mobile support for outer circle single-sided bench
35.501.800
straight
35.511.800
inner
35.521.800
outer
You can choose from 12 standard colours:
400
570
RAL 8019, grey brown
RAL 5000, violet blue
RAL 9005, jet black
RAL 5022, night blue
RAL 9010, pure white
RAL 6009, fir green
RAL 9006, white aluminium
RAL 7022, umbra grey
RAL 9007, grey aluminium
700
420
800
420
460
RAL 3005, wine red
420
445
570
570
845
RAL 7032, pebble grey
2
35.551.800
straight
35.561.800
inner circle
35.531.800
arm rest
35.541.800
single-sided
35.571.800
outer circle
D E S I G N 5 0 0 0 TA B L E
To realise a nice picnic area you can choose the accompanying table,
round 490 mm.
35.542.800
double-sided
35.590.800
wall bracket
STREET FURNITURE: DESIGN 5000
500
RAL 3003, ruby red
35.595.800
ground anchor
450
60
2
1
1
67
S T R E E T F U R N I T U R E : S AT U R N A N D J U P I T E R
1
2
3
1
S AT U R N S E AT
Part code
Description
1
S AT U R N S E AT
The Saturn seat is another ‘group’ seat and available as a two or
35.712.800*
Saturn seat for 2 people, length 950mm
three seat unit. The seat design is similar to the Design 5000 series
free standing
but differs by having fixed elements, not modular. Arm-rests on the
35.722.800*
35.714.800*
Saturn seat for 3 people, length 1,450mm
side are also available from the Design 5000 series. There is also a
free standing
wall mounted version of the Saturn bench.
Saturn seat for 4 people, length 1,920mm
Manufactured from hardened flat bar steel, the Saturn furniture is
free standing
35.713.800*
35.723.800*
Saturn seat for 2 people, length 950mm
resistant to vandalism and additionally, rounded corners and mesh
installation with ground anchor
wire of 4, 5 or 6mm are used for the robust construction. The seats
Saturn seat for 3 people, length 1,450mm
are powder coated in a standard RAL colour.
installation with ground anchor
35.724.800*
Saturn seat for 4 people, length 1,920mm
installation with ground anchor
35.595.800*
2
Saturn seat ground anchor, for fixed installation
S AT U R N TA B L E
table using the same construction. The rectangular table is 1,112mm
long and 770mm wide.
S AT U R N TA B L E
Part code
Description
35.790.800*
Saturn table with 2 legs and base plate in RAL
3
2
To complement the Saturn seat we have developed a co-ordinating
J U P I T E R S E AT
3
J U P I T E R S E AT
The Jupiter seat is comprised of the same basic elements as the
Saturn described above. Again a very strong seat with hardened flat
Part code
Description
35.702.800*
Jupiter seat for 2 people, with arm rests,
bar steel, rounded corners and mesh wire of 4, 5 or 6mm are used
length 950mm
for the robust construction.
Jupiter seat for 3 people, with arm rests,
The sub-structure for this seat however consists of free standing
length 1,450mm
supports that also serve as arm-rests. Moreover, these supports give
Jupiter seat round anchor (note 2 required per
an extra design aspect to the model.
35.703.800*
35.730.000
bench), price each
You can choose from 12 standard colours:
68
This model is also often used for internal locations. If you do not
want it to be a free standing bench then we can offer you special
RAL 3003, ruby red
RAL 7032, pebble grey
RAL 3005, wine red
RAL 8019, grey brown
anchor parts for in-ground fixing.
RAL 5000, violet blue
RAL 9005, jet black
The Jupiter bench is available with two or three seats and has the
RAL 5022, night blue
RAL 9010, pure white
same advantages as the Saturn bench. The Seats are hot dipped
RAL 6009, fir green
RAL 9006, white aluminium
galvanised before powder coating in a standard RAL colour.
RAL 7022, umbra grey
RAL 9007, grey aluminium
On request we can also supply a single seat model.
S T R U C T U R E S E AT I N G
1
S T R U C T U R E S E AT I N G D E E P C U R V E
An appealing and highly practical public furniture range suitable
Part code
Description
for many locations. Combining a high degree of seat comfort, all
35.101.800*
Structure seat deep, no support powder coated
in RAL
weather practicality and attractive design, these seats offer an
alternative to the common bench.
35.122.800*
Structure seat deep, support SGD ½ (photo 1A)
powder coated
By combining seats in an easily communicative arrangement the
35.131.000
Structure seat deep, ground anchor
social aspects of public seating can be maintained. The entire range
35.125.800*
Structure seat deep, support wall mounted
price per pair
is stylish and modern and can be installed in any environment,
S T R UC T U R E S E AT I N G S H A L LO W C U RV E
construction.
Part code
Description
35.201.800*
Structure seat shallow, no support powder
coated in RAL
The range has two shaped seat shells: with a deep curve or with a
shallow curve. These ergonomically formed seats allow the user to
sit in a relaxed posture and provide easy access and comfort for the
35.223.800*
Structure seat shallow, support SGD 5/2
(photo 2A) powder coated
elderly and disabled, plus the form of the seat shells prevents sitting
You can choose from 12 standard colours:
on the backrest.
RAL 3003, ruby red
RAL 7032, pebble grey
RAL 3005, wine red
RAL 8019, grey brown
Additionally planners and architects have a wide variety of products
RAL 5000, violet blue
RAL 9005, jet black
to choose from. From small chairs with or without arm-rests, to
RAL 5022, night blue
RAL 9010, pure white
armchairs to the matching tables and waste paper baskets, individual
RAL 6009, fir green
RAL 9006, white aluminium
furnishings can be combined without any problem – the complete
RAL 7022, umbra grey
RAL 9007, grey aluminium
range is not shown here so please call for more information.
The Seats are hot dipped galvanised before powder coating in a
STREET FURNITURE: STRUCTURE
without influencing the character of the surrounding landscape or
2
standard RAL colour.
Alternatively there is a stainless steel range which can be in polished
or matt finish.
01538-380080
1A
2A
69
STREET FURNITURE: ERGOLAX AND ELEGANTO
2
2
1
1
Measurements (excluding arm-rest):
E RGOL A X
Part code
Description
Length 500 mm, depth 600 mm, height 800 mm, seat height 460
35.603.800*
Ergolax seat group, with 3 seats in wire mesh,
mm, length arm-rest 40 mm.
without armrests, below ground fix in RAL
Measurement of side platform:
Ergolax seat arm rest in RAL
Length 265 mm, depth 540 mm, height 460 mm.
35.660.800*
2
E L E G A N TO
Part code
Description
PAG-wood is a special synthetic resin-pressed wood (pressure
35.903.800*
Eleganto seat group, with 3 seats in wire mesh
500t) which combines the best attributes of wood and plastic. It is
and arm rests, below ground fix in RAL
extremely shock, vandal and weather resistant, even against burning
Eleganto seat group, with 3 seats in PAG-wood
from cigarettes. It is also non-absorbent and therefore, hygienic.
35.923.800*
35.900.800*
and arm rests, below ground fix in RAL
With regards to Arm-rests, they must be ordered with the seat and
Eleganto seat arm rest in RAL
cannot be added afterwards.
You can choose from 12 standard colours:
RAL 3003, ruby red
RAL 7032, pebble grey
RAL 3005, wine red
RAL 8019, grey brown
RAL 5000, violet blue
RAL 9005, jet black
RAL 5022, night blue
RAL 9010, pure white
RAL 6009, fir green
RAL 9006, white aluminium
RAL 7022, umbra grey
RAL 9007, grey aluminium
2
ELEGANTO
The seat is striking by its’ straight and elegant design. Its light tilt
backwards is an invitation for relaxed sitting and rising is easily
managed by people with restricted mobility due to arm-rests and the
440mm height of the seat.
The seat is framed by laser formed parts of 6mm thickness. The high
strength grid mesh of 15x15 mm, made out of 4, 5 and 6mm wire
thickness, is fully protected against rust by hot dipped galvanising
1
ERGOLA X
The seat is striking by its’ curvaceous, elegant design. It is ergonomi-
which provides a base for a quality polished surface.
Also available in PAG-wood.
cally and comfortably formed and invites you to relax.
Exit from the seat for less mobile people is easier due to its height of
460 mm and the supporting arm-rests. The seats are framed by laser
Measurements (excluding arm-rest):
formed parts of 6 mm thickness.
Length 500 mm, depth 600 mm, height 800 mm, seat height 440
mm, width arm-rest 40 mm.
The high strength grid mesh of 15x15 mm, made out of 4, 5 and
Measurement of side platform:
6mm wire thickness, fully protected against rust by hot dipped
Length 265 mm, depth 630 mm, height 440 mm.
galvanising which provides a base for a quality polished surface. The
final finish is a quality powder coating. Fixing of the seats on a stable
sub frame construction made of vertical tube.
70
1
E R G O L A X PA R K S E AT
In addition to the individual seating rows, the Ergolax range of
seating also includes a park seat, which is available in both wire
E R G O L A X S E AT W I T H W I R E M E S H
Part code
Description
35.754.800*
Ergolax seat in wire mesh, length 1,420mm,
with steel framework on base plates,
mesh or in PAG-wood. The steel framework is galvanised and
powder coated in RAL
powder coated in a standard RAL colour (see box) to create a
2
smooth finish. The seat is available in longer lengths on request and
E RG O L A X S E AT W I T H PAG - WO O D
Part code
is delivered un-assembled.
35.774.800*
Description
Ergolax seat in PAG-wood, length 1,420mm,
with steel framework on base plates,
The design has a curve at the front of seat for comfort and has 2
powder coated in RAL
arm rests, length 1,420mm.
You can choose from 12 standard colours:
RAL 7032, pebble grey
RAL 3005, wine red
RAL 8019, grey brown
The Ergolax seat comes as standard with wire mesh finish. The mesh
RAL 5000, violet blue
RAL 9005, jet black
size is 15mm x 15mm square and uses wire in 4, 5, and 6mm gauge
RAL 5022, night blue
RAL 9010, pure white
RAL 6009, fir green
RAL 9006, white aluminium
RAL 7022, umbra grey
RAL 9007, grey aluminium
1
E R G O L A X S E AT W I T H W I R E M E S H
for high stability.
The supporting side elements are manufactured from laser cut steel
with chamfered edges for safety.
The seat is available with oval base plates for bolting to concrete or
with an anchor for below ground fix.
2
Ergolax seat with wire mesh, Part code 37.754.800
E R G O L A X S E AT W I T H PAG - WO O D
This is the Ergolax seat with PAG-wood instead of mesh. PAG-wood
is a combination of; oak, synthetic material and resin bonded under
STREET FURNITURE: ERGOLAX
RAL 3003, ruby red
710
very high pressure. The result is material which exhibits the best
160
1423
qualities of each of the materials with the aesthetics of wood and
820
the strength of synthetics.
458
The material is has high impact resistance and resistant to burning
cigarettes, note it is 3 times heavier than oak. In addition PAG-wood
is hygienic in that it has no pores for dirt o food to become trapped
565
595
1367
1467
in. The seat can be delivered with an oval base plate or with an
anchor for below ground fix.
2
1
71
S T R E E T F U R N I T U R E : V O LT O A N D FA L C O F L I P
2
3
1
1
VO LTO S E AT
1
VO LT O S E AT
Part code
Description
The Volto seating system is a neat, clean design creating a very
35.862.800*
Volto seat, 2 seats with support and base plates
versatile range which will fit in any context where unobtrusive
35.863.800*
Volto seat, 3 seats with support and base plates
seating is required. Based on the ‘Structure’ series, the Volto is
35.864.800*
Volto seat, 4 seats with support and base plates
manufactured from round tube and 12mm square wire mesh.
35.865.800*
Volto seat, 5 seats with support and base plates
You can choose from 12 standard colours:
The seat is delivered as standard with base plates and can be
RAL 3003, ruby red
RAL 7032, pebble grey
mounted on a number of sub frames depending on the length of
RAL 3005, wine red
RAL 8019, grey brown
run required. Each seat is 420mm wide with a depth of 350mm.
RAL 5000, violet blue
RAL 9005, jet black
The seat is galvanised and powder coated as standard in any of the
RAL 5022, night blue
RAL 9010, pure white
following colours
RAL 6009, fir green
RAL 9006, white aluminium
RAL 7022, umbra grey
RAL 9007, grey aluminium
2
VO LTO S E AT S TA I N L E S S S T E E L
2
VO LT O S E AT S TA I N L E S S S T E E L
The Volto seat is also available in a stainless steel version. Edged in
Part code
Description
05.325.000
Volto seat, perforated stainless steel polished,
round steel tube, the seat is available in perforated steel as standard
40x60mm U profile
or 12mm square wire mesh as per the galvanised option. Each seat is
Volto seat, perforated stainless steel brushed,
supplied with a ‘U’ profile bracket for fixing to a support frame.
05.325.100
40x60mm U profile
05.326.000
Volto seat, perforated stainless steel polished,
50x60mm U profile
05.326.100
05.327.000
05.327.100
3
FA LC O F L I P
Volto seat, perforated stainless steel brushed,
The FalcoFlip is an useful combination of Volto Seat with a spring
50x60mm U profile
return mechanism - ideal for bus stops and temporary waiting areas
Volto seat, wall mounting bracket,
where space is an issue. When not in use, the seat sits vertical, it can
stainless steel polished
then be easily folded down for sitting and when the user leaves, the
Volto seat, wall mounting bracket,
seat automatically returns to the vertical position.
stainless steel matt
3
FA LC O F L I P
Part code
72
Manufactured in robust steel, the FalcoFlip is hot dip galvanised to
Description
BS EN ISO 1461 and can be powder coated in any of the 192 RAL
colours.
35.881.000
FalcoFlip seat, with return mechanism
35.881.700
additional price for powder coating in RAL
35.881.100
FalcoFlip seat, wall support for 1 seat
35.881.700
additional price for powder coating in RAL
35.882.100
FalcoFlip seat, wall support for 2 seats
35.882.700
additional price for powder coating in RAL
FA LC O P R I O
FA LC O P R I O S E AT I N G
The FalcoPrio range is a budget range of steel and mesh seating, but
Part code
Description
does not lose any of its robust and vandal proof nature. A highly
35.001.800*
FalcoPrio seat to mount on support
utilitarian range, the FalcoPrio is ideal for use where eating is a must
35.003.800*
FalcoPrio armrest
but design is secondary.
35.032.800*
FalcoPrio support for 2 seats, on base plates
35.033.800*
FalcoPrio support for 3 seats, on base plates
35.034.800*
FalcoPrio support for 4 seats, on base plates
Single seat or several seats combined are easily fixed to a sub-frame
You can choose from 12 standard colours:
of rectangle steel 40x60mm, with a column for in-ground fixing or
with a flange for surface mounting.
subsequently powder coated in any of the standard RAL colours (see
box opposite).
RAL 7032, pebble grey
RAL 3005, wine red
RAL 8019, grey brown
RAL 5000, violet blue
RAL 9005, jet black
RAL 5022, night blue
RAL 9010, pure white
RAL 6009, fir green
RAL 9006, white aluminium
RAL 7022, umbra grey
RAL 9007, grey aluminium
DIMENSIONS:
height:
850 mm
seat-height:
460 mm
depth:
650 mm
length:
460 mm
Part code 35.034.800
2040
45
241,5
450
S T R E E T F U R N I T U R E : FA L C O P R I O
All steel parts are hot dip galvanised to BS EN ISO 1461 and are
RAL 3003, ruby red
1557
73
STREET FURNITURE: TRIBUNE AND LUNAROSA
2
2
1
1
TRIBUNE
1
T R I B U N E S E AT
Part code
Description
The Tribune seat is a majestic design from our ‘Vasart’ range of
39.520.x00*
Tribune seat with seat-back
stone street furniture. A truly ‘statement making’ piece of furniture,
2
the Tribune with its refined stainless back rests and clad central
L U N A R O S A W I T H B AC K
column, has a commanding presence.
Part code
Description
39.500.x00*
LunaRosa seat with backrest of treated Iroko
39.501.x00*
LunaRosa bench without back
Supported on three Ø400mm cylindrical columns, the Tribune has
sweeping lines. Manufactured from a bonded marble aggregate and
synthetic staple, the seat has the aesthetics of marble combined with
There is a choice of 5 colours which are recognized by the
6th. figure of the Part code:
the functionality of solid granite.
xx.xxx.0xx = pink
xx.xxx.1xx = gray
Dimensions: length 4,000mm, width 750mm. Weight 1,550kg.
xx.xxx.2xx = green
xx.xxx.3xx = salt and pepper
2
LU N A R O S A
LunaRosa is another stylish aggregate seat to add flair and depth to
xx.xxx.5xx = yellow
a scheme. The LunaRosa bench consists of two cylindrical shaped
concrete pillars round 325 mm on which a curved seat (bench with
N.B.
back) or a straight seat (bench without back) is located.
expanded brochure showing
all of the “Vasart” range
of products, with some
great ideas for parks and
gardens - all for a copy!
The surface of the concrete pillars and seat is smooth, the round
EXTERNAL “VASART” FURNITURE
We have produced an
sides are bush-hammered. The bench stands independently.
Dimensions LunaRosa with back: length 2,100 mm, depth 900 mm,
height 900 mm, weight 385 kg.
Dimensions LunaRosa without back: length 2,100 mm, depth 500
mm, height 480 mm, weight 315 kg.
PARTNERS ON A JOURNEY TO URBAN CREATIVITY
C O - O R D I N AT E D P R O D U C T S
Litter bins page no. 105. Bollards page no. 130 and 131.
Planters page no. 136 and 137.
Tribune, Part code 39.520.x00
LunaRosa seat, Part code 39.500.x00
750
4000
900
480
900
60
325
74
1
1
ELBA
ELBA
A beautiful bench built from an ellipse and two cylinders in a
Part code
Description
timeless look. Because the division line between the two shapes
39.505.x00*
Elba bench
falls inside, the difference between seating and support elements is
2
emphasized even more. This bench will look great in urban zones as
Part code
Description
well as the green zones.
39.510.x00*
Rondine seat with back
39.515.x00*
Rondine bench without back
The concrete parts are made up a mix of cement, marble grit and
RONDINE
There is a choice of 5 colours which are recognized by the
6th. figure of the Part code:
of the smoothly finished exterior.
xx.xxx.0xx = pink
xx.xxx.1xx = gray
xx.xxx.2xx = green
xx.xxx.3xx = salt and pepper
Length 1750 mm, height 450 mm, width 550 mm. Weight 260 kg.
xx.xxx.5xx = yellow
2
RONDINE
The Rondine bench has sensuous flowing lines providing a stunning
N.B.
Co-ordinated products are available for these designs.
design. Available with or without back rest, the style would look at
home on any prestigious site.
The concrete parts are made up of a mix of cement, marble grit and
Rondine wit back, Part code 39.510.x00
the bench has a zinc armament.
Finished partly smooth and partly rough gives this bench extra
480
840
character.
Two versions differentiate in the presence of a back with a hollow
1900
flowing foot or in the absence of a back with a spherical flowing
foot.
Rondine without back, Part code 39.515.x00
450
480
Elba, Part code 39.505.x00
STREET FURNITURE: ELBA AND RONDINE
has a zinc armament. The bench has a friendly appearance because
1750
1900
1
1
2
75
S T R E E T F U R N I T U R E : FA L C O G R A N I T E
2
1
2
1
FA LC O G R A N I T E M O D U L A R B E N C H
FA LC O G R A N I T E B E N C H
Part code
Description
The FalcoGranite range comprises a complete co-ordinated range of
07.300.015
FalcoGranite bench, starter section, black granite
street furniture products, creating a cool and solid design statement.
07.305.015
FalcoGranite bench, intermediate section,
The FalcoGranite seating range is a modular series of chiselled
black granite
granite blocks with polished sitting surfaces.
2
FA LC O G R A N I T E R E C TA N G U L A R B E N C H
1
Part code
Description
07.310.015
FalcoGranite bench, length 1,500mm
FA L C O G R A N I T E M O D U L A R B E N C H
The modular FalcoGranite seat is a combination of starter and
intermediate 600mm square sections. This modular system enables
planners to create a group of seats of different shapes and sizes to
suit large or small schemes.
The blocks are coupled using stainless steel tubes The site height of
the seat is 450mm and there is 100mm gap between each module.
01538-380080
2
FA L C O G R A N I T E R E C TA N G U L A R B E N C H
The FalcoGranite bench is a solid slab of chiselled granite which
complements the modular seats. With the same polished surface,
the bench has the same sit height of 450mm and the same width of
600mm, but with a length of 1,500mm.
granite elements, 2x Part code 07.300.015 + 1x Part code 07.305.015 + 2x Part code 07.300.300
600
100
600
2000
76
100
600
600
1
VA S A R T
R I V I E R A S E AT
Part code
Description
street furniture. The range is manufactured from a reinforced
39.201.x06*
Riviera seat with back rest
bonded aggregate of marble grit and synthetic staples to give a
2
highly aesthetic group of products which have great functionality –
Part code
Description
call us for a full range Vasart brochure.
39.202.X06*
Riviera bench without back rest
The Riviera series is a part of the large ‘Vasart’ range of co-ordinated
3
1
R I V I E R A S E AT
The Riviera seats are a harmonious combination of geometric
elegance and functionality. A very solid seat, the Riviera is highly
Q UA R Z I N A S E AT
Part code
Description
39.204.x*00
Quarzina seat with back rest
4
Q UA R Z I N A B E N C H
Part code
Description
the seat. Dimensions: length 1,800mm, width 780mm sit height
39.205.x*00
Quarzina bench without back rest
480mm. Weight 695kg.
There is a choice of 5 colours which are recognized by the
6th. figure of the Part code:
partially bush hammered and there is a rainwater gutter integral to
2
RIVIERA BENCH
This is a flat bench version of the above seat, utilising the same
xx.xxx.0xx = pink
xx.xxx.1xx = gray
xx.xxx.2xx = green
xx.xxx.3xx = salt and pepper
xx.xxx.5xx = yellow
mounting feet and surface finish. A highly functional bench with
a high sit height. Dimensions: length 1,800mm, width 600mm, sit
4
height 500mm. Weight 470kg.
Q UA R Z I N A B E N C H
The Quarzina is also available without a back rest, representing a
3
sturdy park bench. Dimensions: length 1,800mm, width 700mm, sit
Q UA R Z I N A S E AT
The Quarzina seats are and elegant and modern alternative to the
height 450mm. Weight 260kg.
Riviera integrating wood with the Vasart aggregate. Again the
surfaces are partially bush hammered and the wood slats are
C O - O R D I N AT E D P R O D U C T S
manufactured from treated Iroko hardwood. Dimensions: length
Litter bins page no. 105. Bollards page no. 130 and 131.
1,800mm, width 700mm, sit height 450mm. Weight 330kg.
Planters page no. 136 and 137.
Riviera seat
Quarzina bench
780
200
450
820
1800
STREET FURNITURE: RIVIERA AND QUARZINA
vandal resistant whilst giving an urban area a real lift. Surfaces are
RIVIER A BENCH
1600
2
1
4
3
77
STREET FURNITURE: IN THE MOOD
1
2
E X A M P L E P H OTO 1 - P O U F
IN THE MOOD - CONCEP T
Description
‘In the Mood’ is unique - a totally modular system of architectural
1
seat top, 650x650x130mm, black
elements which are designed for the construction of bespoke
1
sub-frame, 650x650x85mm, grey
outdoor communal areas. This atmospheric range of seating and
4
short legs, 85x85x225mm, grey
table components designed by Buitenom, enables the user to find
Qty
a place to relax in a way which suits their mood. You can relax on
E X A M P L E P H OTO 2 – LO U N G E CO UC H
Description
a grand sofa, picnic on a table with colleagues or relax with your
1
backrest, 330x210x650mm, black
laptop on the corner couch.
2
seat top, 650x650x130mm, black
4
sub-frame, 650x1,300x85mm, grey
In the Mood is a kind of ‘DIY kit’. It is conceptual outdoor furniture
1
short legs, 85x85x225mm, grey
system manufactured solely from cut granite. Standard elements
Qty
give landscape architects numerous possibilities and combinations
E X A M P L E D R AW I N G 3 – C H A I R
Description
for creativity. The costs are low, foundations are not necessary and
1
backrest, 330x210x650mm, black
the design is vandal resistant.
1
seat top, 650x650x130mm, black
1
sub-frame, 650x650x85mm, grey
4
short legs, 85x85x225mm, grey
Qty
The granite elements are formed in standard dimensions as follows:
Drawing 3: In the Mood Chair
650
Low height
440mm (pouf, sit height)
Overall height
770mm (tables, seat back rest)
Width
650mm (all products)
Seat thickness
130mm (all products)
Sub-frame thickness
850mm (all products)
330
The possibilities are endless, but here we have assembled some
130
85
225
440
78
770
typical arrangements (see photos) which include: chair, couch,
lounge couch, corner couch, pouf, tables high and low (3 sizes: 325,
650 or 1,300mm long).
E X A M P L E P H OTO 1 – S Q UA R E TA B L E H I G H
IN THE MOOD - CONSTRUC TION
The ‘In the Mood’ concept has been designed with the urban
Qty
Description
landscape in mind; parks, city centres, squares, gardens, institutions
1
sub-frame, 650x650x85mm, grey
outdoors or indoors. Landscape architects, project developers, town
4
long legs, 85x85x685mm, grey
planners and other designers of the public space can display high
level of creative freedom. The only limitation of creativity is the limit
of the imagination.
In addition the range has a number of advantages, including being
maintenance free. The heavy construction prevents unwanted
E X A M P L E P H OTO 2 – LO N G TA B L E H I G H
Qty
Description
1
sub-frame, 650x1,300x85mm, grey
4
long legs, 85x85x685mm, grey
2
stretchers, 850x850x480mm, grey (optional)
E X A M P L E D R AW I N G 3 – S O FA
Qty
are not necessary, though concrete feet may be preferred to secure
2
backrest, 330x210x650mm, black
the table feet.
2
table top, 650x650x130mm, black
1
sub-frame, 650x1,300x85mm, grey
4
short legs, 85x85x225mm, grey
The standard colour combination is grey and black granite, but other
Description
colour possibilities of this product are available on request to create
interesting contrasts depending on quantities. The standard finish
consists of mat or shiny surface. In terms of manufacture,
components are pinned and glued to other elements to create a
solid and rigid structure.
Drawing 3: In the Mood Sofa
WWW.FALCO.C O . U K
440
770
1300
STREET FURNITURE: IN THE MOOD
moving and makes the installation vandal resistant, plus foundations
85
1
2
79
2
STREET FURNITURE: CYCAS
1
3
1
C YC A S A S H T R AY, C O P P E R TO P
1
C YC A S A S H T R AY
Part code
Description
The Cycas ashtray is a simple, yet stylish and discrete solution to the
33.624.000
Cycas ashtray, free standing
ever increasing problem of the disposal of cigarette butts. It is made
33.625.000
Cycas ashtray, extended tube for below ground
from 90mm diameter stainless steel tubing (grade 304) making it
installation
robust durable and easily maintainable.
33.626.000
2
Cycas ashtray, with base plate to bolt down
easy process. The top is also available in copper to give the unit a
Part code
Description
33.623.000
Cycas ashtray, stainless steel top
33.623.100
Cycas ashtray, copper top
3
The removable top enables emptying to become a, quick, clean and
C YC A S A S H T R AY, WA L L M O U N T E D
‘cigarette look ‘.
All Cycas’s have a clearly visible no smoking logo, and are available
C YC A S A S H T R AY, S TA I N L E S S S T E E L
free standing, bolt down with base plate, wall mounted or with an
Part code
Description
33.629.000
Cycas ashtray, free standing
33.627.000
Cycas ashtray, extended tube for below ground
extended tube for installation below ground.
installation
33.628.000
Cycas ashtray, with base plate to bolt down
Part code
33.624.000
Part code
33.625.000
Part code
33.626.000
Ø 300
Ø 90
Ø 150
Ø 90
Ø 90
Part code
33.629.000
Part code
33.627.000
Ø 300
Part code
33.628.000
Ø 150
Ø 90
Ø 90
Ø 90
80
900
900
1080
900
900
900
180
180
1080
900
890
Ø 90
Part code
33.623.000
1
1
M 2 A S H T R AY
M2
The M2 is a wall mounted ashtray, that is galvanised and powder
Part code
Description
coated and available in a choice of RAL colours the central cover
33.620.800*
no other
pic- powder coated
M2 ashtray,
wall mounted,
hole is in stainless steel. The unit has a capacity of 3 litres.
tures
of the
M2
*You can choose from
11 standard
colours:
All are supplied with the no smoking logo.
RAL 1007, daffodil yellow
RAL 3000, fire red
Extra product
onviolet bordeaux
RAL 4004,
RAL 5013, cobalt bluethis page?
RAL 6009, pine green
RAL 3005, wine red
2
T O W E R C O L U M N A S H T R AY
The Tower Column ashtray is a classic minimalist yet functional
RAL 6029, mint green
RAL 7016, anthracite grey
RAL 9005, deep black
The ashtray consists of a base Ø160mm supporting an Ø110mm
RAL 9007, grey aluminium
column both are manufactured from die-cast aluminium painted
2
with a polyester resin powder coating for outdoor use.
TO W E R A S H T R AY
Part code
Description
38.890.800
Tower Column Ashtray 860mm high
39.891.800
Tower Column Ashtray 1100mm high
The column is topped with an ashtray manufactured from grade
304 stainless steel, beaded and painted (or natural, upon request),
Ø245x50mm.
3
CENICERO
The Column ashtray is available in two heights, either 860mm or
Part code
Description
1100mm. The column is fixed to the ground by means of bolts and
33.522.000
CeniCero ashtray 120x120x355mm high,
dowels at three points on the bottom flange. Fischer fixing bolts and
wall mounted, powder coated in RAL 8016
dowels and white sand are included with the kit. Weight 2kg.
33.554.000
CeniCero ashtray 160x160x1000mm high,
with base plate for ground fixing,
There is also a wall mounted version available (not shown).
powder coating in RAL 8016
M2
Ø 150
3
C E N I C E R O A S H T R AY
Ø 150
The CeniCero is made of galvanized steel and available in two sizes,
355mm hight (120x120mm) to be fitted to the wall or 1000mm
165
hight (160x160mm) for ground fixing.
The stubbing plate area is made of 304 stainless steel, the whole
design is practical and helps to make it easy to empty and maintain.
180
STREET FURNITURE: M2, TOWER AND CENICERO
RAL 6005, moss green
design for outdoor use which blends with any urban landscape.
The no smoking logo is fixed to the front of the unit.
1
2
3
81
1
STREET FURNITURE: TEMPO AND ROTHMAN
1
2
1
1
T E M P O A S H T R AY
1
T E M P O A S H T R AY
Part code
Description
The Tempo is a rugged ashtray that can be offered as a stand alone
33.150.000
Tempo ashtray for wall and support installation
post mounted or wall mounted unit. It can also be added to the
additional price for powdercoating ashtray
rectangular and hexagonal range of litter bins to offer a litter and
in RAL
cigarette solution to most locations.
33.150.700
33.150.710
additional charge powdercoating litter bin in RAL
and holder in RAL
Access to allowing emptying is by use of a triangular key
33.153.000
Tempo ashtray on post ø 60 mm
Dimensions: 305x158x210 mm, net 245x158x153 mm.
33.154.000
Tempo ashtray on post ø 76 mm
33.157.000
Tempo ashtray support on flat steel plate
33.157.700
additional charge for powdercoating in RAL
33.391.000
triangular key
2
2
R O T H M A N A S H T R AY
A fine wall mounted ashtray available in a range of RAL colours with
a stainless steel perforated stubbing plate.
R OT H M A N A S H T R AY
The body of the ashtray is in galvanised steel. Emptying of the bin is
Part code
Description
33.159.000
Rothman ashtray for wall mounting
33.159.700
additional charge fo powdercoat in RAL colour
33.391.000
triangular key
done through the use of a triangular key.
Tempo
Rothman
203
Part code 33.150.000
160
310
150
863
160
500
Part code 33.157.000
121
315
82
280
FA LC O U LT I M O
FA LC O U LT I M O
The FalcoUltimo litter bin’s design is fresh and functional and has
Part code
been developed in association with the KVD Bureau in Amsterdam,
33.330.000
Description
FalcoUltimo litter bin ground fixed including
powder coating in 2 RAL Colours
Holland, their experiences and observations have influenced the
shape and operation of the litter bin.
It’s slim line profile is ideal in a world where the minimising of ‘street
clutter’ and ease of movement on our streets is becoming a
necessity.
S T R E E T F U R N I T U R E : FA L C O U LT I M O
For ease of emptying by the operator, the bin liner/body has
functional decorative banding that are used as aids to help grasp it
in the lifting and emptying process.
Capacity is approximately 55 litres.
FalcoUltimo
1050
1250
[email protected]
575
200
83
S T R E E T F U R N I T U R E : FA L C O L I N E A
FA LC O L I N E A
FA LC O L I N E A
Part code
Description
The FalcoLinea range mingles traditional materials with modern
31.528.021
FalcoLinea litter bin with FSC timber
design, and are ideally suited to any urban environment including
33.391.000
triangular key
Shopping Centres, Parks, Town Squares/Plaza’s and Corporate
Buildings.
FalcoLinea can offer an opportunity to relax in style and comfort and
enjoy the surroundings. The aesthetic choice and combination of the
FA LC O L I N E A C O O R D I N AT E D P R O D U C T S
Benches page no. 14.
natural colour of wood with hot dip galvanised steel, and if required
a powder coated finish in a choice of 192 standard RAL colours.
With it’s complementary range of products it is the complete answer
to any street scene.
1
The mark of responsible forestry.
FA LC O L I N E A L I T T E R B I N
The litterbin can be free standing or fixed to the ground or even
CU-COC-008530
have a concrete block attached to the base to add extra stability.
©1996 Forest Stewardship Council
Litter bin capacity is 80 litres.
Overall Height 753mm, width at the top 486mm, width at the
bottom 331mm,
Depth 546mm, with an opening of 190 x 240mm.
FalcoLinea
546
753
486
331
84
TRIANGLE
TRIANGLE
The Triangle range of products from Falco is a coordinated range
Part code
Description
of street furniture characterised by its fresh eye catching design, its
33.511.017
Triangle litter bin, free-standing, with stainless
functionality and its durability. The range consists of; shelters,
steel panels quality 316 between 2 natural stone
canopies, benches and seating, litter bins, bollards and cycle parking
elements (green/black), dimension 440x440 mm,
systems.
contents approx. 44 litres, weight 140 kg,
opening 180x180 mm, with internal container
The range also benefits from the versatility of the material options
available: a range of aggregates can be used to create either light
cream supports or heavier appearance darker mounts to contrast
T R I A N G L E C O O R D I N AT E D P R O D U C T S
Benches page no. 16 and 17.
stainless steel or powder coated in any of the 192 RAL colours.
Bollards page no. 118.
Cycle parking page no. 168, 176, 177 and 178.
The litter bin has a very useable open top design and is opened by
using a triangular key in the side door.
It can be supplied either freestanding or can be bolted down by
using expansion bolts as required by the surface to be fixed too.
Litter bin capacity is 44 litres.
Triangle
440
800
440
Shelters page no. 222 and 223.
STREET FURNITURE: TRIANGLE
with the hardwood slats. Similarly, the range can be made in either
85
1
1
STREET FURNITURE: MONET AND CIMA
2
2
1
MONET
1
MONET
Part code
Description
Part of a coordinated collection the main characteristics of the
33.600.800*
Monet litter bin, cast aluminium and powder
products are the delicate and essential figures.
coated
The floral relief and perforated texture give the surfaces a vibrant
Monet litter bin, cast iron and powder coated
sensation, where the formal and functional aspects fit together.
Part code
Description
The Monet collection, with its Impressionist echoes, gives elegance
33.634.800*
Cima litter bin with stainless steel ashtray
33.600.820*
2
CIMA
and personality to urban space.
The Monet Litter bin can be cast from aluminium, or iron, and
You can choose from 11 standard colours:
RAL 1007, daffodil yellow
RAL 3000, fire red
RAL 3005, wine red
RAL 4004, violet bordeaux
RAL 5013, cobalt blue
RAL 6009, pine green
RAL 6005, moss green
RAL 6029, mint green
RAL 7016, anthracite grey
RAL 9005, deep black
RAL 9007, grey aluminium
powder coated in range of RAL colours.
Options include the addition of an ashtray in the top.
Capacity is 110 litres.
2
CIMA
All elements of the Cima range use concave steel profiles. As a result
of the clean imagery and form’s the ‘design line’ is neutral enabling
the products to blend perfectly in both historical and contemporary
1
M O N E T C O O R D I N AT E D P R O D U C T S
Benches page no. 40.
Planters page no. 132. Bollards page no. 116.
contexts.
Cima is manufactured from sheet steel that is galvanised and
powder coated, it is opened by use of a triangular key to a side door.
Options include a choice of two types of ashtrays to the top of the
2
C I M A C O O R D I N AT E D P R O D U C T S
Benches page no. 22.
bin.
Capacity for the bin is 75litres.
Planters page no. 132. Bollards page no. 117.
Monet
Cima
Ø 500
86
620
850
950
110
Ø 406
1
1
A MBROSIANO
AMBROSIANO
An uncomplicated galvanised steel powder coated open topped litter
Part code
bin, but with a certain style due to it’s Italian design.
33.615.800*
2
Minimum quantity per order is 10 items.
Ambrosiano litter bin, open topped, capacity 80
litre, in standard RAL
A range of RAL colours enhance it’s adaptability to be used in varied
urban landscapes. Capacity 80 litres.
Description
GRANDELISEO
Part code
Description
33.629.800*
Grandeliseo litter bin, with covered top, capacity
110 litre, in standard RAL
2
RAL 1007, daffodil yellow
RAL 3000, fire red
street areas it is constructed form galvanised sheet steel and
RAL 3005, wine red
RAL 4004, violet bordeaux
available in 11 standard RAL colours.
RAL 5013, cobalt blue
RAL 6009, pine green
RAL 6005, moss green
RAL 6029, mint green
Each foot has a built in base plate for ease of installation onto
RAL 7016, anthracite grey
RAL 9005, deep black
concrete or similar hard surface. Capacity of 110 litres.
RAL 9007, grey aluminium
Minimum quantity per order is 10 items.
Ambrosiano
GrandEliseo
735,2
internal bin
650
850
1021
Ø480
Ø300
Ø400
155,9
503,2
155,9
STREET FURNITURE: AMBROSIANO AND GRANDELISEO
GR ANDELISEO
A slender elliptical large capacity litter bin ideal for plaza’s or narrow
You can choose from 11 standard colours:
1
1
2
87
STREET FURNITURE: ELISEO AND MAJESTIC
2
1A
1
1B
ELISEO
2
MAJESTIC
Part code
Description
A 45 litre capacity elliptical litter bin. It has a characteristic conical
05.342.000
Eliseo litter bin, roof and posts in stainless steel
shape, wider at the top and narrower at the bottom, and it is
33.630.800*
33.631.800*
2
Eliseo litter bin in stainless steel, posts
provided with fixed lid; the bottom of the bin is adequately aerated,
powdercoated in RAL
and the lid is roller levelled to avoid any rubbish being left on the
Eliseo litter bin, completely galvanized and
top. Both the bottom and lid are in sheet steel 30/10 mm thick; they
powdercoated in RAL
are held in position by two lateral oval hollow posts in steel 60x30
mm which also act as support.
MA JESTIC
Part code
Description
05.333.000
Majestic litter bin, roof and posts in stainless steel
33.633.800*
Majestic litter bin, completely galvanized and
powdercoated in RAL
You can choose from 11 standard colours:
RAL 1007, daffodil yellow
RAL 3000, fire red
RAL 3005, wine red
RAL 4004, violet bordeaux
RAL 5013, cobalt blue
RAL 6009, pine green
RAL 6005, moss green
RAL 6029, mint green
RAL 7016, anthracite grey
RAL 9005, deep black
The bin posts are fastened to the ground by means of a steel
terminal flange. The two perforated Sendzimir galvanised sheet steel
panels, 10/10 of a mm thick are roller levelled, polished and
provided with the stiffening ribs required; one of the two panels
opens and is provided with a lock.
N.B.
Eliseo
Eliseo (1B) and Majestic are also available in stainless steel.
650
RAL 9007, grey aluminium
1
ELISEO
530
260
A 45 litre capacity elliptical litter bin, provided with fixed lid.
The bottom and lid, appropriately roller levelled, are in sheet steel
30/10 mm thick.
are fastened to the ground by means of a steel terminal flange.
The two perforated Sendzimir galvanised sheet steel panels, 10/10
of a mm thick are roller levelled, polished and provided with the
stiffening ribs required: one of the two panels opens and is
provided with a lock.
88
910
The lid and bottom are held in position by two lateral oval hollow
posts in steel 60x30 mm which also act as supports. The bin posts
1
1
PA N D O R A
PA N D O R A
This strange and unique design for a litter bin has a base made in
Part code
steel with an aluminium lid with 3 openings.
33.900.800
Description
Pandora litter bin in steel and aluminium,
powder coated in standard RAL colour
A triangular key gives access to a ring for attachment of a plastic bag
33.902.800
or an option of a steel liner is possible.
Pandora litter bin in aluminium,
powder coated in standard RAL colour
All steel parts are galvanised and powder coated in a range of
2
DA R A
standard RAL colours, also can be powder coated in silver, metallic
Part code
Description
bronze or anthracite. An ashtray is an option.
33.920.800
Dara litter bin with built in ashtray
S T R E E T F U R N I T U R E : PA N D O R A A N D D A R A
Litter bin capacity is 75litres.
2
DA R A
The Dara waste bin is a contemporary product, based on a
userfriendly design and modern look. The curved top together with
the oval shape of the body provide a unique appearance on the
streets. The large door opening makes emptying easy.
An ashtray is built in as standard, the capacity of the litter bin is 100
litres.
Pandora
Dara
Ø 580
780
200
850
1000
390
530
1
2
1
89
2
1B
STREET FURNITURE: SCARABEO
1A
1
SC A R A B E O W I T H L I D
Part code
Description
SCAR ABEO
The side supports are vibrated concrete and have rounded corners;
33.670.800*
Scarabeo litter bin with lid, with concrete sides
the containing framework is in steel angular profiles and either
and steel rod grid 8 mm, contents 70 litres,
steel rods, hardwood, Pine or rectangular staves 55x35 mm with
33.685.800*
steel parts hot galvanized and powdercoated in
rounded edges.
RAL color
To change the bag, open either the top or the front of the container.
Scarabeo litter bin with lid, with concrete sides
Available in 70 or 140 litre sizes.
and steel rod grid 8 mm, contents 140 litres,
Galvanised and powder coated in a standard RAL colour.
steel parts hot galvanized and powdercoated in
1
RAL color
2
SC A R A B E O W I T H L I D A N D A S H T R AT
Dimensions 140 litres: 660x500x1,000 mm (photo 1B).
Part code
Description
33.672.800*
Scarabeo litter bin with lid and ashtray,
contents 70 litres, steel parts hot galvanized and
2
S C A R A B E O W I T H L I D A N D A S H T R AY
Dimensions 70 litres: 510x500x980 mm.
powdercoated in RAL color
Dimensions 140 litres: 660x500x1,000 mm.
with concrete sides and steel rod grid 8 mm,
33.687.800*
SC AR ABEO WITH LID
Dimensions 70 litres: 510x500x980 mm (photo 1A).
Scarabeo litter bin with lid and ashtray,
with concrete sides and steel rod grid 8 mm,
contents 140 litres, steel parts hot galvanized and
powdercoated in RAL color
You can choose from 11 standard colours:
RAL 1007, daffodil yellow
RAL 3000, fire red
RAL 3005, wine red
RAL 4004, violet bordeaux
RAL 5013, cobalt blue
RAL 6009, pine green
RAL 6005, moss green
RAL 6029, mint green
RAL 7016, anthracite grey
RAL 9005, deep black
Scarabeo, 140 litres
1000
RAL 9007, grey aluminium
660
90
1
M AC I N A
1
M AC I N A
A 150 litre litter bin with a modern “trunk-conical” line. The Macina
Part code
Description
model litter bin has been designed to facilitate the easy removal of
05.336.000
Macina litter bin of stainless steel 304 with holder
for refuse bin
rubbish by the operators.
05.338.000
Macina litter bin of stainless steel 304 with
concrete base of round 540 mm and holder
The container and lid are in galvanised sheet steel and cut using
for refuse bin
innovative laser technology (photo 1A). Also available in stainless
steel (photo 1B).
33.610.800*
Macina litter bin with holder for refuse bag,
The domed lid is round and is provided with a hole measuring
33.611.800*
Macina litter bin with holder for refuse bag
height 84 cm, powdercoated in RAL colour
and ashtray, height 86 cm, powdercoated in
without lifting the lid. The key to access the bin will be supplied
RAL colour
exclusively to the operators.
33.612.800*
Macina litter bin with concrete base of 540 mm,
with holder for refuse bag, height 920 mm,
powdercoated in RAL colour
It is also available with a bag holder in steel rod and suitable hooks
to fasten the bag itself. It is also available in a flanged version or
33.613.800*
Macina litter bin with concrete base of 540 mm,
with a semi-spherical concrete base. Additional charge for powder
with ashtray and holder for refuse bag,
coating steel framework in a standard RAL colour.
height 940 mm, powdercoated in RAL colour
You can choose from 11 standard colours:
2
PA L L M A L L
This steel waste with liner has a capacity of 45 or 90 litres. After the
RAL 1007, daffodil yellow
RAL 3000, fire red
RAL 3005, wine red
RAL 4004, violet bordeaux
RAL 5013, cobalt blue
RAL 6009, pine green
RAL 6005, moss green
RAL 6029, mint green
RAL 7016, anthracite grey
RAL 9005, deep black
RAL 9007, grey aluminium
lid is opened the liner can be removed and emptied. The bin has
2
been designed to be wall mounted.
Part code
Description
33.445.000
Pall Mall litter bin 45 litre capacity
33.445.700
additional charge for powder coating steel
With the lid closed it’s in built baffle system ensures that a fire
PA L L M A L L
cannot be sustained .
construction in RAL colour
33.446.000
33.446.700
Pall Mall litter bin 90 litre capacity
additional charge for powder coating steel
S T R E E T F U R N I T U R E : M A C I N A A N D PA L L M A L L
approximately Ø 150 mm, created to place the rubbish in the bin
construction in RAL colour
2
1A
1B
91
STREET FURNITURE: COROLLA AND FIORE
2
2
1
1
COROLL A
1
COROLLA
Part code
Description
A 90 litre capacity circular or 45 litre capacity semicircular litter bin
33.647.800*
Corolla litter bin with a round lid, diameter 600
constructed with shaped flat steel profiles 20x4 mm, welded at the
33.648.800*
33.649.000
mm, height 900 mm, support with flange,
top to a ring Ø 600 in steel rod diameter 10 mm and strengthened
steel parts powdercoated in RAL colour
with three intermediate rings Ø 400 in steel rod diameter 10 mm.
Corolla litter bin with a round lid and ashtray,
The internal container, round and extractable, is in galvanised sheet
diameter 600 mm, height 900 mm, support with
steel 8/10mm thick perforated at the bottom to discharge rain wa-
flange, steel parts powdercoated in RAL colour
ter. It is provided with an anti-theft safety chain.
concrete support for round litterbin Corolla,
The bin can be provided with a round lid in galvanised sheet steel,
dimensions 510x80 mm
2
complete with a rotation hinge to facilitate removal of the contents.
FIORE
Description
Furthermore, the lid can include an ashtray made of a round fixed
33.664.800*
Fiore litter bin 25 litres powder coated
part in sheet iron 10/10 mm. with rimmed border to avoid any
33.665.800*
Fiore litter bin 40 litres powder coated
sharp edges. A mobile part in perforated steel sheet is placed inside
33.666.800*
Fiore upright with anchor piece powder coated
the fixed part to allow the ash to pass down and at the same time
33.667.800*
Fiore upright with base plate powder coated
Part code
separate the cigarette butts that will remain on top. To facilitate its
emptying, the ashtray is provided with a handle in the centre.
You can choose from 11 standard colours:
RAL 1007, daffodil yellow
RAL 3000, fire red
RAL 3005, wine red
RAL 4004, violet bordeaux
RAL 5013, cobalt blue
RAL 6009, pine green
and painted with thermo-hardening polyester powder in RAL 9005
RAL 6005, moss green
RAL 6029, mint green
colour.
RAL 7016, anthracite grey
RAL 9005, deep black
The ashtray is hot galvanised in accordance with UNI regulations
2
FIORE
The Fiore is a modular waste bin designed in the shape of a flower.
RAL 9007, grey aluminium
It is made up of a beautiful elliptical upright of pressed aluminium.
Fiore, 2x Part code 33.664.800, 2x Part code 33.665.800
and 1x Part code 33.667.800
Up to 4 units can be placed on the upright, made up of 2 x 25 litres
and 2 x40 litres bins, giving a total capacity of 130 litres. The Fiore is
258
900
613
642
also available with 1 bin of 40 litres.
554
92
You have a choice of 11 standard powder coated RAL colours.
1
1
FA LC O P E R F O R O U N D
FA LC O P E R F O R O U N D
Part code
Description
slotted holes, welded all round internally onto the base plate for
33.870.010
FalcoPerfo Round litter bin on post to grout in
mounting on the post.
33.870.040
The cylindrical outer casing is made of perforated steel plate with
FalcoPerfo Round litter bin on post with welded
base plate diam. 200 mm at ground level
Hot-dip galvanised. Internal containers always made of galvanised
33.870.700
additioncal charge for powdercoating
in RAL colour
steel plate. Internal bin is 355 mm x height 545 mm.
You can take the inner bin out or you put a garbage bag in and
2
around the inner bin.
Part code
Description
33.850.010
FalcoPerfo Square litter bin on post to grout in
FA LC O P E R F O S Q UA R E
Made of perforated sheet steel. The square post and the perforated
33.850.700
additional charge for powdercoating in RAL colour
33.851.010
FalcoPerfo Square litter bin with lid, post to grout in
sheet are hot-dip galvanised. The post is suitable for a single or
33.851.700
additional charge for powdercoating in RAL colour
double bin and has to be grouted in.
33.860.010
FalcoPerfo Square double litter bin with lid, post to
grout in
All internal containers are made of galvanised steel plate.
33.860.700
additional charge for powdercoating in RAL colour
A hinged lid with handles is optional. The inner bin can be taken out
or a garbage bag can be put in and around it.
FA LC O P E R F O C O O R D I N AT E D P R O D U C T S
Benches page no. 65.
internal bin
Part code 33.860.010
600
655
195
400
200
170
385
Part code 33.870.010
S T R E E T F U R N I T U R E : FA L C O P E R F O
2
FA LC O P E R F O S Q UA R E
2
1
2
1
93
2
1
S T R E E T F U R N I T U R E : FA M I LY, Q U AT T R O Q U A R T I A N D FA L C O D I C E
3
1
3
1
FA M I LY
1
FA M I LY
Part code
Description
Modular large bin, cylindrical in shape in galvanised sheet 15/10
33.609.850
Family litter bin powder coated in 4 colours
mm thick.
(Yellow, Red, Blue and Green)
It is provided with a manual system to lift and move the
2
lid, in sheet steel 40/10, to facilitate the emptying of rubbish.
Q UAT T R O Q UA R T I
Part code
Description
05.340.000
Quattroquarti recycling litter bin in stainless steel
Every module has a capacity of 90 litres and it is distinguished by
304, drip covers powder coated
a specific colour for separate collection of rubbish.
3
FA LC O D I C E
Part code
Description
33.608.850
FalcoDice recycling bin, four openings,
stainless steel
2
Q UAT T R O Q UA R T I
Cylindrical recycling litter bin divided into 4 parts for different refuse
glass, plastic, paper and general rubbish, total capacity is 200 litres.
Every sector is distinguished by a different colour, and on the inside
individual refuse sack’s are attached to ring bag holders.
QuattroQuarti
The top part of the bin is closed by a convex lid, with a central
extractable ashtray.
All metal parts are in stainless steel, except drip covers which are in
galvanised and powder coated steel.
3
FA LC O D I C E
An amusingly designed recycling bin in the shape of a dice, this
should encourage young children to get used to using litter bins and
1100
make them more aware of recycling.
The 4 holes on the top are coloured to distinguish different rubbish
collection. The lid can be opened with a key
The structure of the bin is formed In aluminium with the sides in
stainless steel.
620
Minimum quantity per order is 10 pieces.
94
1
CLEAR
Sometimes the simplest solutions are the most obvious.
Clear is a simple and user friendly refuse collection system
CLEAR
Part code
Description
33.780.800*
Clear litter bin, anti-terrorism, triple for the
available as individual wall mounted or post mounted, open topped
different collection of rubbish with bag
or hooded sack holders or even as an ashtray system.
holder in aluminium and post
33.781.800*
Clear litter bin, anti-terrorism, triple for the
different collection of rubbish with bag
Post mounted versions are available also in double or triple system
holder in aluminium for wall mounting
to promote recycling.
33.782.800*
with bag holder in aluminium for wall mounting
Clear
hooded top
open topped
Clear litter bin, anti-terrorism, single RAL 6018,
ashtray
33.783.800*
Clear litter bin, anti-terrorism, single,
with bag holder in aluminium for wall mounting
33.784.800*
Clear litter bin, anti-terrorism, single RAL 6018,
with bag holder in aluminium and post
472
33.785.800*
Clear litter bin, anti-terrorism, single,
with bag holder in aluminium, lid and post
33.786.800*
Clear litter bin, double with post,
construction galvanised and powder coated
Clear post mounted
372
472
33.788.800*
ashtray, semicircular for Clear litter bin
33.789.800*
ashtray, round for Clear litter bin
33.790.800*
lid in die casting
2
CLEAR UP
Part code
Description
33.791.800*
Clear Up closed litter bin in steel, with bag holder
STREET FURNITURE: CLEAR
372
in aluminium and post, capacity 50 litres
990
You can choose from 11 standard colours:
RAL 1007, daffodil yellow
RAL 3000, fire red
RAL 3005, wine red
RAL 4004, violet bordeaux
RAL 5013, cobalt blue
RAL 6009, pine green
RAL 6005, moss green
RAL 6029, mint green
RAL 7016, anthracite grey
RAL 9005, deep black
RAL 9007, grey aluminium
1
1
1
2
95
S T R E E T F U R N I T U R E : R E C TA N G U L A R L I T T E R B I N
1A
1C
1B
1D
2
Photo 1A=Part code 33.105.050
Photo 1B=Part code 33.105.060
Photo 1C=Part code 33.107.010
Photo 1D=Part code 33.106.030
L I T T E R B I N , R E C TA N G U L A R
Part code
Description
33.105.0xx
Rectangular litter bin, 40 litres, open model, with
supports and steel bin
33.106.0xx
Rectangular litter bin, 40 litres, with ongoing
1
R E C TA N G U L A R L I T T E R B I N
Our bins distinguish themselves through:
*
easy function recognition
*
simplicity of use
*
shape
*
stable construction
*
neat finish without sharp edges
*
long term protection against corrosion due to hot-dip
supports and steel bin
33.101.1xx
galvanisation according to BS EN-ISO 1461
Rectangular litter bin, 40 litres, with ongoing
supports and aluminium bin
33.161.1xx
33.107.0xx
33.102.1xx
33.162.1xx
.
33.391.000
Versions according to last three figures of the art.no.:
Rectangular litter bin, 60 litres, with ongoing
.x10 =
to grout in
supports and aluminium bin
.x30 =
on base plate with concrete plate 600x600x100 mm
Rectangular litter bin, 40 litres, with square roof,
.x40 =
on base plate
supports and steel bin
.x50 =
for post installation
Rectangular litter bin, 40 litres, with square roof,
.x60 =
for wall installation
supports and aluminium bin
.x70 =
for post installation with clamp for round ø 60 mm
Rectangular litter bin, 60 litres, with square roof,
.x80 =
for post installation with steel band for round ø 60 mm
supports and aluminium bin
The litter bins are available in steel or aluminium. The aluminium
special triangular key
bins consist of 2 mm aluminium sheets. The steel bins have 1.75 mm
Part code 33.162.130
thick sheets.
The pin can be removed from its holder through unlocking it with a
310
special triangular key.
The hot-dip galvanised steel supports, steel bins and aluminium bins
350
420
can be powdercoated in a RAL colour for an additional charge. As
well as the superior appearance, the powdercoating also gives extra
protection against corrosion.
490
905
It is also possible to give the support one colour and the bin in
another colour!
280
2
100
600
96
R E C TA N G U L A R L I T T E R B I N W I T H A S H T R AY
The ashtray’s shown on photo 2 can be seen on page 82.
600
1
1
PEGASO
PEGASO
Modern rounded triangular shaped Litter Bin constructed from
Part code
Description
stainless steel for that contemporary feel and ease of maintenance.
33.905.800
Pegaso litter bin, 120 litres
The large side door is open by use of a triangular key.
2
Inside a steel ring is attached to fit refuse sacks too.
G A R B AG E B OX
Part code
Description
33.441.040
Garbagebox litter bin on base plates
33.445.030
Garbagebox litter bin on base plates mounted on
An ashtray is fitted to the top of the litter bin.
slab 600x600x100 mm
33.445.700
additional charge for powdercoating litter bin in
33.445.710
additional charge for powdercoating in two
RAL colour
2
colours; steel structure in RAL colour,
Utilitarian and robust. Dimension 565x565x1100 mm.
cladding in RAL colour
33.391.000
The box consists of a hot dip galvanized steel robust welded
3
construction. The front can be opened with a triangular key.
N.B.
triangular key
PRECINC T BIN
Part code
Description
This box goes well with our benches series 38.0,
33.002.564
Precinct litter bin with ashtray and liner
described on pages 60, 61 and 62.
33.002.564A
Precinct litter bin, spare liner
3
PRECINC T BIN
Combination litter and ash bin is available with galvanised liner or
sack ring all steel parts are galvanised and powder coated, the
Garbagebox
ashtray top is covered by a stainless steel triangulated top.
560
560
Liner is removed for easy emptying by use of a triangular key.
600
900
955
1150
Precinct bin
600
400
3
1
STREET FURNITURE: PEGASO, GARBAGEBOX AND PRECINCT BIN
G A R B AG E B O X
A bigger litter bin with gable roof for a content of 120 litres.
2
97
STREET FURNITURE: HEXAGONAL LITTER BIN
2
1
1
1
ALUMINIUM LIT TER BIN
1
H E X AG O N A L A LU M I N I U M 6 5 L I T R E S
Part code
Description
33.262.110
Hexagonal aluminium litter bin, contents 65 litres,
LIT TER BIN
A very robust and durable litter bin brought about by its engineered
with ongoing steel supports and hexagonal roof
and thoughtful construction. The sleek design ensures that rubbish
and ashtray to grout in
can be dropped from almost any angle.
Hexagonal aluminium litter bin, contents 65 litres,
The aluminum containers are produced from 2 mm aluminum plate,
with ongoing steel supports and hexagonal roof
and for ease of emptying the container can be removed in it’s
and ashtray, on base plate with concrete slab
entirety from the support cradle all of which is operated with the use
33.262.130
33.262.160
60x60x10 cm
of a triangular key. Capacity 65 litres.
Hexagonal aluminium litter bin, contents 65 litres,
A wall mounted unit is also available.
with ongoing steel supports and hexagonal roof
Optional ashtray unit is available to be fitted to the top of the bin.
and ashtray, for wall mounting
33.262.702
additional charge for powdercoating litter bin and
post / holder in RAL colour
2
A L U M I N I U M L I T T E R B I N , 110 L I T R E
Part code
Description
33.240.130
Hexagonal aluminium litter bin with hinged bin with
restriction, contents 110 litres, with steel posts and
roof and base plate on concrete slab 60x60x10 cm
33.240.700
2
H E X AG O N A L A LU M I N I U M 110 L I T R E S
LIT TER BIN
All the features of the Hexagonal 65 litres litter bin but with the
added advantage of a larger capacity of 110 litres, because of the
capacity the bin is ideal for locations where more waste is left or
where it is not possible to empty the bins so readily/often.
Part code 33.262.110
additional charge powdercoating litter bin in
RAL colour
additional charge powdercoating post / holder
370
33.240.701
in RAL colour
33.241.130
Hexagonal aluminium litter bin with clampring
370
450
for refuse bag and hinged bin with restriction,
contents 110 litres, with steel posts and roof
and base plate on concrete slab 60x60x10 cm
additional charge powdercoating post / holder
540
RAL colour
33.241.701
200
179
in RAL colour
98
900
additional charge powdercoating litter bin in
725
33.241.700
1
L I T T E R B I N , H E X AG O N A L
S T E E L L I T T E R B I N , H E X AG O N A L
Our bins distinguish themselves through:
Part code
Description
*
easy function recognition
33.207.020
Hexagonal steel litter bin, with ongoing steel
*
simplicity of use
*
shape
*
stable construction
*
neat finish without sharp edges
*
long term protection against corrosion due to hot-dip
supports and hexagonal roof, on base plate with
concrete slab 60x60x10 cm (photo 1A)
33.207.040
supports and hexagonal roof, on base plate
33.207.060
33.207.080
to grout in
on base plate with concrete plate 600x600x100 mm
.x40 =
on base plate
.x50 =
for post installation
.x60 =
for wall installation (photo 1D)
.x70 =
for post installation with clamp for round ø 60 mm
.x80 =
for post installation with steel band for round ø 60 mm
Hexagonal steel litter bin, with ongoing steel
supports and hexagonal roof, for post installation
with steel band (photo 1B)
33.207.700
additional charge for powder-coating litter bin
in RAL colour
33.207.702
additional charge for litter bin and post /
holder in RAL colour
S T E E L L I T T E R B I N W I T H A S H T R AY, H E X AG O N A L
Part code
Description
33.217.020
Hexagonal steel litter bin with ashtray, with
The litter bins are available in steel or aluminium. The aluminium
ongoing steel supports and hexagonal roof,
bins consist of 2 mm aluminium sheets. The steel bins have 1.75 mm
on base plate with concrete slab 60x60x10 cm
thick sheets.
The pin can be removed from its holder through unlocking it with a
(photo 1C)
33.217.040
special triangular key.
Hexagonal steel litter bin with ashtray, with
ongoing steel supports and hexagonal roof, on
base plate
The hot-dip galvanised steel supports, steel bins and aluminium bins
33.217.060
can be powdercoated in a RAL colour for an additional charge. As
well as a superior appearance the powdercoating also gives extra
protection against corrosion.
for wall mounting
33.207.700
It is also possible to give the support one colour and the bin in
another colour!
Hexagonal steel litter bin with ashtray, with
ongoing steel supports and hexagonal roof,
additional charge for powder-coating litter bin
in RAL colour
33.207.702
additional charge for litter bin and post /
STREET FURNITURE: HEXAGONAL LITTER BIN
Versions according to last three figures of the art.no.:
.x30 =
Hexagonal steel litter bin, with ongoing steel
supports and hexagonal roof, for wall mounting
galvanisation according to BS EN-ISO 1461
.x10 =
Hexagonal steel litter bin, with ongoing steel
holder in RAL colour
2
L I T T E R B I N -S I N G L E P O S T
33.391.000
triangular key
It is also possible to have four bins on one post. For example if you
want to separate garbage.
1B
1D
1C
1A
2
99
STREET FURNITURE: KOPENHAGEN, EUROLINE AND BOWLER
1
2
3
1
KO P E N H AG E N
Part code
Description
1
KO P E N H AG E N
Our Kopenhagen litter bin is a timeless bin that fits any
33.010.000
Kopenhagen litter bin for wall or post fixation
environment. Especially with a colour in RAL to your liking or that is
33.010.700
additional charge for powdercoating of itter bin
one with the back ground. A special triangular key opens the bottom
in RAL colour
to easily empty the bin and your hands do not get dirty! The bin has
33.055.340
post ø 60 mm, length 1500 mm
a width of 430 mm, a depth of 310 mm and a height of 685 mm.
33.055.341
set of clamping strips to go with post
The wall has a thickness of 1.5 mm. You can fix the Kopenhagen
33.055.700
additional charge for powdercoating of post
to the wall or to an optional post of Ø 60 mm and a length of 150
in RAL colour
mm. To fix the bin on the post you need clamping strips.
2
EUROLINE
Part code
Description
33.015.000
Euroline litter bin with tube frame
33.015.700
additional charge for powdercoating of litter bin
in RAL colour
33.015.710
go over the top. Through four side tubes of Ø 47.5 mm the bin is
clamped with help of bolts.
additional charge for powdercoating of tube
frame in RAL colour
3
2
EUROLINE
The same litter bin as above but then between two posts that also
BOWLER
Part code
Description
33.012.000
Bowler litter bin to go between posts
02.974.000
set of Bowler posts to mount litter bin,
3
BOWLER
Again the Kopenhagen bin but then between two Bowler posts. The
bin is clamped in the same way as the EuroLine.
The posts have a total length of 1500 mm and a diameter of 90 mm.
This bin goes well with the Bowler posts, barriers, guide rails,
benches and bicycle parking system.
round 90 mm, total height 1,500 mm
33.012.700
EuroLine
additional charge for powdercoating of litter bin
Bowler
711
in RAL colour
02.974.700
additional charge for powdercoating set of
posts in RAL colour
440
1500
special triangular key
1725
33.391.000
440
Ø60
WW W . F A L C O . C O . UK
Ø90
651
100
674
ROUND LIT TE R BIN
ROUND LIT TER BIN
Part code
Description
rectangle and hexagonal the new variant Round. It is a round bin
33.220.010
litter bin without hood, to grout in
which is available either with or without a hood to protect against
33.220.030
litter bin without hood, on base plate with concrete
A new litter bin to add to the series of bins utilizing basic shapes,
plate 600x600x100 mm
rain and birds.
33.220.040
litter bin without hood, on base plate
The ergonomic design of the round litter bin also gives it a great
33.220.060
litter bin without hood, for wall installation
modern feel, with the top cover blending into the upright supports.
33.230.010
litter bin with hood, to grout in
33.230.030
litter bin with hood, on base plate with concrete
33.230.040
litter bin with hood, on base plate
33.230.060
litter bin with hood, for wall installation
plate 600x600x100 mm
The bin and steel supports can be powder coated separately to give
As standard an ashtray is fitted. A triangular key is used to aid
33.220.700
additional charge for powdercoating litter bin
33.220.0x0 and 33.230.0x0 in RAL colour
removal of the liner for emptying.
33.220.702
Part code
33.220.040
additional charge for powdercoating litter bin and
steel support 33.220.0x0 and 33.230.0x0 in RAL
Part code
33.230.040
colour
33.220.703
additional charge for powdercoating litter bin
33.220.0x0 and 33.230.0x0 in RAL colour and
steel support in RAL colour
485
Ø330
triangular key
Ø330
908
908
485
33.391.000
STREET FURNITURE: ROUND LITTER BIN
a contrasting feel to the design.
WWW.FALCO.C O . U K
420
420
1A
1B
1C
101
2
3
S T R E E T F U R N I T U R E : PA C M A N , D I N O VA A N D D E X T E R
1
3
1
1
PAC M A N
Part code
Description
1
PAC M A N
A 32 litre capacity litter bin with lid made of recyclable high density
33.650.000
PacMan litter binn for mounting on post,
polyethylene in green or orange.
colour green
Its particular shape provides for the lid to fit into the lower part,
33.651.000
33.652.000
33.653.000
33.660.000
33.662.000
PacMan litter bin for mounting on post,
thus concealing the rubbish bag. Furthermore, the supporting post
colour orange
perfectly fits in with the profile of the bin.
PacMan litter bin with galvanised supporting post,
colour green
It is provided with a safety lock to secure the upper section. It can be
PacMan litter bin with galvanised wall bracket,
fastened to any support, post or wall. The support pole is
colour orange
squared and in steel 50x50 mm section and 1.5 mm in thickness.
post for PacMan litter bin, with 15 cm anchorparts,
It is available in the flanged or embedded version or even with a
height above ground with litter bin 1090mm
concrete base element.
post for PacMan litter bin, with concrete platebase,
Indicative weight: 4 kg. Overall dimensions: 377x326x635mm.
height with litter bin 1090mm
2
D I N OVA
Part code
Description
33.068.000
Dinova litter bin in Dark Green
33.068.220
Dinova litter bin by means of click system also later
ashtray to build in
33.068.030
Dinova sack holder
33.055.340
Dinova tube post round 60mm, total length
1500mm for litter bin
33.055.341
loose set of clamping strips for mounting of
litter bin to post
3
DEXTER
Part code
Description
33.050.000
Dexter plastic litter bin, colour bin ressembling
RAL 2002, orange
33.051.000
Dexter plastic litter bin, colour bin ressembling
RAL 6029, green
33.055.341
Dexter loose set of clamping strips for mounting of
litter bin to post
33.055.343
102
Dexter loose steel wall support for litter bin
2
D I N OVA
The Dinova has a modern and contemporary design which is low
maintenance and pleasant to the eye. It is made in HDDE plastic and
has a hood to protect from wind, birds and rodents.
Can be wall or post mounted and has a capacity of 50 litres.
Available in green, orange, blue and grey.
3
DEX TER
Capacity approximately 50 litres. Made from polyethylene or steel
(see page 103) and available in green or orange.
The litter bin has a floor flap at the bottom of the bin for easy, rapid
and hygienic emptying (key is provided).
Can be wall or post mounted.
1
1
LISTER
LISTER
Part code
Description
The Lister has an integrated ashtray at the edge of the rim, there is
33.890.010
Lister litter bin, to grout in
minimal fire hazard because the internal pipe runs independently to
33.890.700
A simple solid post mounted litter bin with a capacity of 50 litres.
additioncal charge for powdercoating
in RAL colour
the bottom of the bin.
33.391.000
triangular key
Can be powder coated on request and also can be produced without
2
the ashtray.
Part code
Description
33.055.000
Midas litter bin, emptying through ground lid,
2
M I DA S
with key
M I DA S
33.055.700
flap at base of bin for easy, quick and hygienic emptying (key is
supplied).
additional charge for powdercoating litter bin
in RAL colour
33.055.340
Dimensions: height 580mm above 390x230mm, 430x275mm.
tube post round 60mm, total length 150cm
for litter bin
Weight around 5.7 kg.
33.055.710
Also possibe in polyethylene (see page 102).
33.055.341
additional charge for powdercoating tube post
in RAL colour
litter bin to post
Midas, Part code 33.055.000
33.055.343
0
3
586
3
loose steel wall support for litter bin
200
10
50
loose set of clamping strips for mounting of
T U L I PA N O
Part code
Description
39.881.109
Tulipano litter bin without ashtray
39.882.109
Tulipano litter bin with ashtray
427
267
T U L I PA N O
Elegant and cylindrical litter bin, with conical base and a faceted
there is a second cylinder which forms a hollow space. This solution
capping and interior bag holder.
excludes any view of the sack inside.
Tulipano is made of three parts: pedestal, storage and closure cap.
The closure cap is inserted in the storage unit. The cap can be
The pedestal consists of a formed concrete as previously described.
supplied with an ashtray. Central body and cap are from cold rolled
The storage units is made of a cylinder (Ø 285 mm) and outside
steel band, thickness 15/10, painted with epoxy paint.
S T R E E T F U R N I T U R E : L I S T E R , M I D A S A N D T U L I PA N O
Steel waste with a capacity of 50 litres. Equipped with a lockable
1
2
3
103
S T R E E T F U R N I T U R E : FA L C O C U B E A N D PA R K
1
2
1
1
Part code
Description
1
FA LC O C U B E
The FalcoCube is distinguished by it’s blend of traditional timber and
33.450.008
FalcoCube litter bin, free standing
steel, this sleek design is complemented with a range of planters and
2
FA LC O C U B E
seating the Falco range of wood based products gives designers a
PA R K
real choice when wishing to use natural materials.
Part code
Description
33.400.301
Park litter bin in conical shape with slats of
Kambala 25x45mm, concrete socle and inner
bin galvanised
33.400.601
additonal charge wooden slats varnished in white
33.402.000
additional charge conical litter bin with lid
33.405.301
Park litter bin in straight shape with slats of
Kambala 30x50mm, concrete socle and inner
bin galvanised
33.405.601
The framework is all hot dip galvanised steel and can be polyester
powder coated in any of the 192 RAL colours.
2
PA R K
A traditional wooden bin ideal for park or leisure areas, the wooden
Kambala slats are fixed to galvanized steel rings for robustness. The
base is a substantial concrete pedestal.
The inner liner is also galvanised.
additonal charge wooden slats varnished in white
Capacity 54 litres. Height: 660mm.
01538-380080
FalcoCube
138
330
660
1040
Park, Part code 33.400.301
104
1
1
TRIBUNE
TRIBUNE
The litter bin comprises of two lateral supports of steel reinforcement
Part code
Description
in a cylindrical shape (radius 200 mm), with the upper part rounded
39.525.x00*
Tribune litter bin with container and dome of
brushed stainless steel, capacity 68 litre
with a central container in inox brushed stainless steel 316 aisi,
2
covered with a dome (radius 200 mm) of the same material.
C E S TO N E
Part code
Description
The container is provided with a lock. Finishing: supports are bush-
39.865.x00*
Cestone litter bin, capacity 136 litre
hammered on the outside and smooth inside.
39.867.000
incorporated stainless steel ashtray
39.868.000
sheet-zinc basket (it can be extracted)
N.B.
3
CESTONE
A practical design with a large capacity. This cylindrical bin has a
C E S TO N E Q UA D R ATO
Part code
Description
39.862.x00*
Cestone Quadrato litter bin, capacity 150 litre
There is a choice of 5 colours which are recognized by the
6th. figure of the Part code:
reinforced cover. A key lock is available on request.
A pull-out container in galvanised steel is optional. Weight 215 kg.
Capacity is 136 litres.
xx.xxx.0xx = pink
xx.xxx.1xx = grey
xx.xxx.2xx = green
xx.xxx.3xx = salt and pepper
xx.xxx.5xx = yellow
Possible cover colours: green, RAL 6005 or grey, RAL 7016.
A stainless steel ashtray in the cover can be supplied on request.
Cestone, Part code 39.865.x00
3
C E S T O N E Q UA D R AT O
Similar in design to the Cestone (described above) but in a
square shape. Available with pull-out container in galvanised steel or
with bag ring. Weight 310 kg, capacity 150 litres.
Possible cover colours: RAL 6005 moss green or RAL 7016
1080
anthracite grey.
C O - O R D I N AT E D P R O D U C T S
Benches page no. 75 and 77.
Planters page no. 137.
STREET FURNITURE: TRIBUNE AND CESTONE
2
The bin goes well with Tribune seat on page 74.
600
1
2
3
105
STREET FURNITURE: FROG
FROG
FROG
Part code
Description
The uncomplicated design of the Frog makes it a use anywhere bin
33.636.800*
Frog with integrated roof, basket of steel plate,
and is available either wall or post mounted and comes as standard
powdercoated in standard RAL colour
with a hood to protect against wind, birds and rodents.
Frog with steel basket holder with integrated roof,
Refuse sacks can be held in place by the optional thermo plastic sack
ashtray, powdercoated in standard
holder.
33.637.800*
RAL colour
33.639.000
33.641.000
support round 60 mm for mounting of litter bin
It is a great utilitarian product and very flexible in where it can be
Frog, total height 1200mm to grout in
used.
supports round 60 mm with concrete
platebase for mounting of litter bin Frog,
total height 1000mm
Frog, Part code 33.637.800 + 33.639.000
RAL 1007, daffodil yellow
RAL 3000, fire red
RAL 3005, wine red
RAL 4004, violet bordeaux
RAL 5013, cobalt blue
RAL 6009, pine green
RAL 6005, moss green
RAL 6029, mint green
RAL 7016, anthracite grey
RAL 9005, deep black
440
1200
635
RAL 9007, grey aluminium
Ø 325
You can choose from 11 standard colours:
200
01538-380080
106
1
1
D O G S TAT I O N
D O G S TAT I O N
The Dog Station is a combined unit for the dispensing of bags and
Part code
for the disposal dog of dog waste, it is practical, clean and hygenic
33.310.800*
and the lockable dispenser has space for as many 800-1000 waste
bags.
Description
Dog Station Bag Dispenser and waste bin
between uprights
33.312.800*
Dog Station Separate Dispenser and waste bin
between uprights
You can choose from 6 standard colours:
RAL 1018, zinc yellow
RAL 7016, anthracite grey
The dispenser is also available for installation on the wall or on a
RAL 5015, sky blue
RAL 9007, grey aluminium
pole.
2
RAL
6005, moss green
RAL 9016, traffic white
The Dog Station is available in 304 stainless steel quality, or
2
galvanized and powder coated in a standard RAL colour.
Part code
Description
33.320.800*
Clean Dog waste bin
CLEAN DOG
You can choose from 11 standard colours:
2
CLEAN DOG
The Clean Dog is a cylindrical open topped bin that is set at an angle
to make the depositing of dog waste easier it is galvanized and can
be powder coated.
The bin comes with the logo’s as shown on the pictures.
RAL 1007, daffodil yellow
RAL 3000, fire red
RAL 3005, wine red
RAL 4004, violet bordeaux
RAL 5013, cobalt blue
RAL 6009, pine green
RAL 6005, moss green
RAL 6029, mint green
RAL 7016, anthracite grey
RAL 9005, deep black
RAL 9007, grey aluminium
Clean Dog
584
774
785
Ø 460
Ø 450
S T R E E T F U R N I T U R E : D O G S TAT I O N A N D C L E A N D O G
The waste receptacle has a capacity of 35 litres and can be offered
as a stand alone unit.
2
1
1
2
107
STREET FURNITURE: ROUND STEEL BOLLARDS
1A
1B
ROUND STE EL BOLL ARD
ROUND STEEL BOLL ARD
Part code
With welded flat top, Ø 108 mm
The Falco Round steel bollards are increasingly being used as
02.800.160
Round steel bollard, height 1007mm from base
a sturdy and also attractive barrier.
plate 180x180mm
They can be used to protect facades and business entrances,
Round steel bollard, height 1007mm from base
pavements, pedestrian areas, along verges etc.
02.800.170
plate 300x300mm
Available in diameters of 108x3.6 mm and 219x4 mm, and in
02.801.000
Round steel bollard, height 1207mm
different lengths and with a welded flat top (Photo 1A) or welded
02.802.000
Round steel bollard, heigth 1507mm
round top with embedded ring (Photo 1B).
With welded flat top and embedded ring,
Ø 108 mm
The various ranges can be supplied with an extended tube for below
02.800.161
Round steel bollard, height 1076mm from base
ground installations or with a 180 x 180mm welded base plate on
plate 180x180mm
the 108 mm diameter and 300x300 mm on the 219 mm diameter
02.800.171
Round steel bollard, height 1076mm from base
for an additional charge.
02.801.151
Round steel bollard, height 1276mm
The bollards are made of top grade tubing, and are hot-dip
02.802.151
Round steel bollard, heigth 1576mm
galvanised in accordance with EN-ISO 1461 when they have been
With welded flat top, Ø 219 mm
processed.
plate 300x300mm
02.820.170
Round steel bollard, height 1014mm from base
welded flat top
plate 180x180mm
02.821.000
Round steel bollard, height 1214mm
02.822.000
Round steel bollard, heigth 1514mm
welded round top
with embedded ring
With welded flat top and embedded ring,
Ø 219 mm
02.820.171
Round steel bollard, height 1141mm from base
plate 300x300mm
02.821.151
Round steel bollard, height 1341mm
02.822.151
Round steel bollard, heigth 1641mm
N.B.
All bollards can be powder-coated in a standard RAL colour
for additional charge.
Bollard with welded flat top with base plate or to grout in,
is now also available in stainless steel. See page 110.
108
S Q UA R E S T E E L B O L L A R D
S Q UA R E S T E E L B O L L A R D
Part code
With welded flat top, 100x100x4 mm
02.830.160
Square steel bollard, height 1004mm from base
02.830.170
Square steel bollard, height 1004mm from base
barrier.
02.831.000
Square steel bollard, height 1204mm
Available in the cross-section dimensions 100 mm, 120 mm and 140
02.832.000
Square steel bollard, heigth 1504mm
The Falco Square steel bollards are primarily used to protect shop
windows and facades and pavements, pedestrian areas, along verges
plate 180x180mm
and at business entrances.
plate 300x300mm
The square bollards provide an attractive and, above all, sturdy
With welded flat top and embedded ring,
mm, and in different lengths with 2 kinds of flat tops (see below).
100x100x4 mm
plate 180x180mm
for an additional charge. On the bollard with 100 mm profile this is
180x180 mm or 300x300 mm, whilst from 120mm it is 300x300mm.
Square steel bollard, height 1080mm from base
02.830.172
Square steel bollard, height 1080mm from base
plate 300x300mm
welded flat top
welded flat top and
embedded ring
02.831.152
Square steel bollard, height 1280mm
02.832.152
Square steel bollard, heigth 1580mm
With welded flat top, 120x120x4 mm
02.860.170
Square steel bollard, height 1004mm from base
plate 180x180mm
02.861.000
Square steel bollard, height 1204mm
02.862.000
Square steel bollard, heigth 1504mm
With welded flat top and embedded ring,
120x120x4 mm
02.860.172
Square steel bollard, height 1080mm from base
plate 300x300mm
02.861.152
Square steel bollard, height 1280mm
02.862.152
Square steel bollard, heigth 1580mm
S Q UA R E S T E E L B O L L A R D
With welded flat top and embedded ring,
With welded flat top, 140x140x5 mm
02.840.170
Square steel bollard, height 1004mm from base
Square steel bollard, height 1080mm from base
02.841.000
Square steel bollard, height 1204mm
plate 300x300mm
02.842.000
Square steel bollard, heigth 1504mm
140x140x5 mm
02.840.172
02.841.152
Square steel bollard, height 1280mm
02.842.152
Square steel bollard, heigth 1580mm
plate 180x180mm
STREET FURNITURE: SQUARE STEEL BOLLARDS
The bollard can, of course, be equipped with a welded base plate
02.830.162
109
3
S T R E E T F U R N I T U R E : S TA I N L E S S S T E E L B O L L A R D S
2
1
1
S TA I N L E S S S T E E L B O L L A R D
1
S TA I N L E S S S T E E L B O L L A R D, Ø 8 9M M
Part code
Description
An elegant and slim post in stainless steel, quality 316.
05.420.010
Stainless steel bollard extended for below ground
With versions to grout in or to remove from base sleeve with
installation, Ø 89mm
triangular lock on cylinder. Its diameter is 89mm.
05.420.060
05.422.081
05.423.081
2
Stainless steel bollard with base plate, Ø 89mm
Stainless steel bollard, removable, length 820mm,
with quick fastening system and base sleeve,
2
S TA I N L E S S S T E E L B O LL A R D, Ø 20 5M M
Demarcation bollard ideal for Plaza’s or Squares or any other
Ø 89mm
pedestrianised areas, made from 316 grade stainless steel they will
Stainless steel removable bollard, cylinder lock,
stay looking good for many year. Diamter is 205mm.
including base sleeve, Ø 89mm
Reflective red or white tape can be added if required.
S TA I N L E S S S T E E L B O L L A R D
Part code
Description
05.400.600
Stainless steel bollard, fixed, total length 750mm,
3
TA Z I O B O L L A R D
Column bollard with a diameter of 60mm stainless steel with upper
Ø 205mm
terminal provided with an illuminated LED system. Slits are present
additional price for a 150mm wide red reflective
along the tubular structure ,these are lined internally with plastine
red tape
opaline piping to uniformly diffuse light.
additional price for a 150mm wide red reflective
It is available with extended tube for below ground installation or
white tape
with base plate.
05.490.000
05.491.000
3
Minimum quantity per order is 10 items.
TA Z I O
Part code
05.750.000
Description
Tazio bollard, extended for below ground
Part code 05.420.010
Part code 05.420.060
installation, Ø 60mm
05.750.010
Tazio bollard with base plate, Ø 60mm
750
800
20
820
Part code 05.400.600
400
Ø89
Ø205
110
Ø89
1
S TA I N L E S S S T E E L B O L L A R D Ø 4 8 M M
1
S TA I N L E S S S T E E L B O L L A R D, Ø 4 8 M M
A slender bollard with a diameter of 48mm in 304 grade stainless
Part code
Description
steel for installation below ground or with a base plate.
05.630.000
Stainless steel bollard, extended for below ground
installation, Ø 48mm
Ideal in an architectural environment such as parks and town
05.630.010
centres.
2
2
S TA I N L E S S S T E E L B O L L A R D Ø 102M M
A robust bollard with a diameter of 102 mm in 304 grade stainless
Part code
Description
05.680.160
Stainless steel bollard, with round base plate,
steel. This bollard gives both a visible and static deterrent.
Very suitable as a separation for pedestrians and vehicles, Plaza’s or
Stainless steel bollard, Ø 48mm, with base plate
S TA I N L E S S S T E E L B O L L A R D, Ø 10 2M M
Ø 102mm
05.682.080
Stainless steel bollard, removable, total length
1250mm, triangular quick opening system, without
base sleeve, Ø 102mm
Available with base plate, extended tube for below ground
05.682.180
installation or removable.
Stainless steel bollard, removable total length
1250mm, triangular quick opening system, with
base sleeve, Ø 102mm
05.682.200
W W W . F A L C O . C O.UK
cover for base sleeve of stainless steel bollard
05.68x.xxx
Part code 05.680.160
Part code 05.630.000
Part code 05.682.180
135
165
900
1250
1250
Ø48,3
RVS 304
S T R E E T F U R N I T U R E : S TA I N L E S S S T E E L B O L L A R D S
Squares etc.
2
1
2
2
111
STREET FURNITURE: BOWLER BOLLARDS
2
1
1
B O W L E R B O L L A R D, F I X E D
1
B OWLE R B O LL A R D, F I X E D
Part code
Description
The Bowler bollard is based on the traditional cannon design used
02.950.060
total length 820 mm from base plate 180x180 mm
extensively through out the UK and Europe.
02.950.700
additional charge for powdercoating in RAL colour
This versatile bollard is available in a wide range of versions, stainless
02.960.020
total length 1220 mm to grout in
steel, galvanized only or galvanized and powder coated in choice of
02.960.040
02.960.050
length 1220 mm from separate galvanised ground
192 standard RAL colours, these options can be supplied as an
plate 300x300 mm with 2 M8x16 bolts
extended tube version for below ground installation, with a base
length 1220 mm from welded ground plate
plate to surface fix or as a removable bollard (see page opposite).
300x300 mm
02.960.700
additional charge for powdercoating in RAL colour
If required brackets can be added to the bollard so chain linking can
02.960.701
additional charge for powdercoating in RAL 9010,
be used.
colour: white
The Bowler theme can be used through out a scheme by using the
additional charge for powdercoating in RAL 6012,
coordinated range of seating, litter bins, and guide rails.
02.960.703
colour: green
02.960.756
additional charge for white coating with 2 red
Part code
Available for mounting chains:
03.890.000
set of brackets, galvanised, for attaching chains,
Call our Technical Sales Staff for co-ordinated street furniture ideas.
bands
incl. stainless steel bolts
03.890.700
02.960.020
02.960.040
02.960.050
additional charge for powdercoating brackets in
RAL colour
03.891.000
set of brackets, galvanised and powdercoated
in RAL 9010, colour: white
set of brackets, galvanised and powdercoated
NB
See page 125 for chains
length 1250 mm to grout in
05.410.060
post on base plate 180x180 mm, length 820 mm
05.412.080
removable, length 820 mm, with quick fastening
05.413.080
removable, length 820 mm, with cylinder system
200
05.410.010
200
Description
1220
Part code
system
112
820
B O W L E R B O L L A R D, S TA I N L E S S S T E E L
400
2
1020
in RAL 6012, colour: green
1020
03.892.000
300
300
3
B O W L E R B O L L A R D, R E M OVA B L E
3
B O W L E R B O L L A R D, R E M OVA B L E
Part code
Triangular quick fastening system (photo 3A)
wide range of removable posts, available with 2 securing systems.
02.962.081
removable post with triangular quick fastening
Firstly, quick fastening. Ideal for those situations where the post
02.962.700
needs to be removed regularly and therefore quickly. When it is
02.962.756
Alongside the fixed posts the Falco Design Line Bowler also offers a
system, with base sleeve long 400mm
additional charge for white coating with 2 red
bands
replaced, the post clicks back into the fixing (photo 3A). Unlock with
the special Falco triangular key (art.no. 03.190.000).
additional charge for powdercoating in RAL colour
02.998.040
steel hot-dip galvanised base socket,
length 400mm
02.960.756
special triangular key
fastened and unfastened using the triangular key.
Part code
Triangular spindle fastening system (photo 3B)
02.962.091
removable post with triangular spindle fastening
02.962.700
additional charge for powdercoating in RAL colour
02.962.756
additional charge for white coating with 2 red
system, with base sleeve 400mm long
The quick fastening post is also available with a separate locking half
euro profile cylinder (included, photo 3C).
Highly suitable for those situations where the post only needs to be
removed occasionally.
bands
02.997.040
steel hot-dip galvanised base socket,
03.190.000
special triangular key
Part code
Cylinder lock system with 3 keys (photo 3C)
02.963.081
removable post with cylinder lock system system,
02.963.700
additional charge for powdercoating in RAL colour
The base sockets can be ordered separately.
02.962.081
length 400mm
02.962.091
02.963.081
keyed differently
1220
02.998.040
steel hot-dip galvanised base socket,
length 400 mm
400
400
400
additional charge for white coating with 2 red
bands
820
820
820
02.963.756
C O - O R D I N AT E D P R O D U C T S
Guide rails page no. 144 and 145.
Litter bin page no. 100.
Cycle parking system page no. 188.
3A
3B
S T R E E T F U R N I T U R E : B O W L E R B O L L A R D S , R E M O VA B L E
A threaded spindle (photo 3B) in the post allows the post to be
3C
113
STREET FURNITURE: CONICAL BOLLARDS
1
C O N I C A L B O L L A R D, F I X E D
1
CO N I C A L B O LL A R D
Part code
Description
A barrier post made of steel tubing with a diameter of 133/90x3
03.800.010
Conical fixed barrier post, total length 1050mm
mm. This series of barrier posts are fitted with a rounded steel top
03.800.020
Conical fixed barrier post, total length 1250mm
made of a single piece of flat steel with ring. Overall, it is therefore a
03.800.040
Conical fixed barrier post, total length 1250mm,
sturdy barrier post with an attractively finished rounded Bowler top.
with separate ground plate 300x300mm
03.800.060
03.800.700
Conical fixed barrier post, total length 820mm from
Usable in virtually any environment and for many purposes. We
welded base plate 300x300mm
produce these barrier posts in large quantities, making the price
additional price for powdercoating of post
particularly attractive.
03.800.010/020/040 in RAL colour
03.800.701
03.800.703
03.800.710
additional charge for powdercoating of post
Unlike so many imitations, these conical barrier posts are not made
03.800.010/020/040 in RAL 9010 - white
of welded steel plate; a special system is used to heat and
additional charge for powdercoating of post
regenerate the seamless tubing. The result is a much stronger post
03.800.010/020/040 in RAL 6012 - green
without a weld seam.
additional charge for powdercoating of post
03.800.050/060 in RAL
If required brackets can be added to the bollard so chain linking can
be used.
03.800.040
03.800.060
820
820
01538-380080
820
03.800.020
400
400
200
300
114
2
C O N I C A L B O L L A R D, R E M OVA B L E
2
C O N I C A L B O L L A R D, R E M OVA B L E
Part code
Triangular quick fastening system (photo 2A)
posts, available with 2 securing systems.
03.802.080
removable conical bollard with quick fastening
Firstly, quick fastening. Ideal for those situations where the post
03.802.700
Alongside the fixed posts we also offer a wide range of removable
triangular locking system, without base sleeve
colour
needs to be removed regularly and therefore quickly. When it is
replaced, the post clicks back into the fixing (photo 2A). Unlock with
additional price for powdercoating of post in RAL
03.802.701
additional charge for powdercoating post in white,
RAL 9010
the special Falco triangular key (art.no. 03.190.000).
03.802.703
additional charge for powdercoating post in green,
RAL 6012
For a the spindle fastening (photo 2B), a threaded spindle in the post
separate base sleeve with top plate for conical post
The quick fastening post is also available with a separate locking half
Part code
Triangular spindle fastening system (photo 2B)
euro profile cylinder with 3 keys (included, photo 2C).
03.802.090
removable conical bollard with spindle fastening
Highly suitable for those situations where the post only needs to be
03.802.700
with quick fastening system, length 400mm
triangular locking system, without base sleeve
additional charge for powdercoating post in RAL
colour
removed occasionally.
03.802.701
The base sockets can be ordered separately.
additional charge for powdercoating post in white,
RAL 9010
03.802.080 +
03.898.040
03.802.090 +
03.899.040
03.803.090
03.802.703
additional charge for powdercoating post in green,
RAL 6012
03.899.040
separate base sleeve with top plate for conical post
Part code
Cylinder lock system with 3 keys (photo 2C)
with spindle system, length 400mm
removable conical bollard with quick fastening
locking system for cylinder (included)
820
820
820
03.803.090
03.803.700
additional charge for powdercoating post in RAL
colour
03.803.701
additional charge for powdercoating post in white,
RAL 9010
400
400
03.803.703
additional charge for powdercoating post in green,
RAL 6012
03.898.040
separate base sleeve with top plate for conical post
with quick fastening system, length 400mm
2A
2B
S T R E E T F U R N I T U R E : C O N I C A L B O L L A R D S , R E M O VA B L E
allows the post to be fastened and unfastened using the triangular key.
03.898.040
2C
115
STREET FURNITURE: MONET
1
MONET BOLL ARD
1
MONET BOLL ARD
Part code
Description
The Monet bollard is part of a collection that has impressionist
04.902.800
Monet bollard, High Aluminium Bollard without
echoes and gives elegance and personality to urban spaces.
lighting
Subsequently the Monet bollard can be formed in cast iron or
Monet bollard, High Cast Iron Bollard without
aluminium and is available in two different heights both of which are
lighting
available with or without lighting.
04.903.800
04.902.816
Monet bollard, High Aluminium Bollard with
lighting
The shape is characterised by a column that widens on its
04.903.816
Monet bollard, High Cast Iron Bollard with lighting
downward journey, finished in black steel, other standard RAL
04.900.800
Monet bollard, Low Aluminium Bollard without
colours are available.
lighting
04.900.816
04.901.800
Monet bollard, Low Aluminium bollard with lighting
Monet bollard, Low Cast Iron Bollard without
detail are available on request.
lighting
04.901.816
The bollard can also have optional chain linking, or can be linked
with stainless steel tubing to create an elegant and stylish barrier
Monet bollard, Low Cast Iron bollard with lighting
C O - O R D I N AT E D P R O D U C T S
Benches page no. 40.
Litter bins page no. 86.
[email protected]
Planters page no. 132.
Monet high bollard
900
Monet low bollard
Ø108
116
Ø250
Ø250
420
Ø108
1
1
CIM A BOLL ARD
Cima is a ball shaped bollard with a flattened underside. Here under
fits an aluminum pole with round base plate supplied with 3 bolt
holes for ground fixing. The sphere is black coated while the pole
and the base plate are aluminium colored.
Total height is 330mm, height of the globe is 260mm and with a
diameter of 300mm. Nice detail is the optional obtainable LED
lightning inside the sphere which shines out from the underside.
CIMA BOLLARD
Part code
Description
04.905.800
Cima bollard, Aluminium
04.905.816
Cima bollard, Aluminium with lighting
04.906.800
Cima bollard, Cast Iron
04.906.816
Cima bollard, Iron with lighting
2
ÉLEGANCE BOLL ARD
Part code
Description
03.400.010
Élegance fixed barrier bollard, total length 1200mm
03.400.050
The light shines to the floor alongside the pole.
Élegance fixed barrier bollard, total length 1200mm
from welded ground plate 300x300mm
Élegance fixed barrier bollard, total length 900mm
from welded base plate 180x180mm
Benches page no. 22.
Litter bins page no. 86.
Planters page no. 132.
03.400.700
additional charge for powdercoating of post RAL
03.402.080
Élegance removable barrier bollard,p total length
900mm, locking with triangular quick fastening
2
É LE G A N C E B O LL A R D
Elegance is certainly a term which applies to this new post from
03.402.700
additional charge for powdercoating of post RAL
03.498.023
base sleeve, long 200 mm
03.190.000
triangular key
Falco. A svelte appearance thanks to the slim mid-part, and
The additional option of powder-coating means that the Elegance
attractively finished at the top with a slightly curved top.
barrier post can be used practically anywhere. Models with base
The post curves from 114 mm to 70 mm to 113 mm.
plate and welded base plate are also available.
Élegance
03.400.010 03.400.050 03.400.060
03.402.080
Another attractive addition to our range of posts, another style
1057
900
Cima
Ø300
330
260
900
900
1200
1200
900
innovation from Falco. Galvanised according to EN-ISO 1461.
STREET FURNITURE: CIMA AND ÉLEGANCE
03.400.060
C O - O R D I N AT E D P R O D U C T S
Ø114
2
1
2
117
STREET FURNITURE: TRIANGLE
1
TRIANGLE BOLLARD
1
TRIANGLE BOLL ARD
Part code
Removable barrier bollard, triangular key locking
The Triangle range of products from Falco is a co-ordinated range
02.232.070
Triangle bollard without base sleeve (long anchor)
of street furniture characterised by its fresh eye catching design,
02.232.270
Triangle bollard, coated white with 2 reflecting
strips, without base sleeve (long anchor)
02.232.700*
additional charge for powdercoating in RAL colour
02.232.701*
additional charge for powdercoating in RAL colour
03.191.043
base sleeve long 430 mm for
02.232.070/02.232.270 to grout in
its functionality and its durability. The range consists of; shelters,
canopies, benches and seating, litter bins, bollards and cycle parking
systems. The range also benefits from the versatility of the
material options available: a range of aggregates can be used to
create either light cream supports or heavier appearance darker
mounts to contrast with the hardwood slats. Similarly, the range can
be made in either stainless steel or powder coated in any of the 192
Part code
Folding barrier bollard, triangular key locking
02.246.010
Triangle bollard with anchor 150 mm to grout in
02.246.210
Triangle bollard, coated white with 2 reflecting
settings, providing the architect with a very versatile range of
RAL colours. As a result, the aesthetics of the FalcoTriangle range
are well suited to both modern urban locations or traditional rural
strips, with anchor 150 mm to grout in
products with which to create a distinctive outdoor environment.
02.246.700*
additional charge for powdercoating in RAL colour
The Triangle bollards are available in fixed, removable and folding
02.246.701*
additional charge for powdercoating in RAL colour
designs. The top of the bollards are all finished with the ‘Triangle
03.190.000
triangular key for 02.246.010/02.246.210
Finial’ which is made from aluminium, the body of the bollard is
Part code
Folding barrier bollard, cylinder locking system
formed from 70 x 70mm square steel tube which is galvanised and
02.247.060
Triangle bollard on hinging base
can optionally be powder coated in 192 standard RAL colours.
02.247.260
Triangle bollard, coated white with 2 reflecting
strips, on hinging base
03.990.000
03.990.010
C O - O R D I N AT E D P R O D U C T S
euro profile half-cylinder, key differently with 3
Benches page no. 16 and 17. Litter bins page no. 85. Shelters page
keys, length 39.5 mm, ordered with Falco product
no. 222 and 223. Cycle parking page no. 168, 176, 177 and 178.
euro profile half-cylinder, keyed alike with 3 keys,
02.232.070
02.246.010
02.247.060
02.250.000
strips, with 500 mm anchor to grout in
02.250.700*
additional charge for powdercoating in RAL colour
02.250.701*
additional charge for powdercoating in RAL colour
xx.xxx.700*
additional charge for bollard with Triangle finial
powdercoated in a RAL colour
xx.xxx.701*
additional charge for Triangle finial powdercoated
in a RAL colour
118
1400
Triangle bollard, coated white with 2 reflecting
920
02.250.200
920
Triangle bollard with 500 mm anchor to grout in
150
Fixed barrier bollard
02.250.000
430
Part code
920
length 39.5 mm, ordered with Falco product
1
1
S TA N D U P B O L L A R D
A distinctive combination of wood and steel to give this bollard a
noble and functional look.
This bollard will coordinate with both the FalcoCube and FalcoBloc
S TA N D U P B O L L A R D
Part code
Description
02.290.000
Stand Up bollard 80x80 mm, anchor piece 200 mm
02.290.060
Stand Up bollard 80x80 mm, base plate
180x180x10 mm
ranges of seating and litter bins.
02.290.700
additional charge for powdercoating in
a RAL colour
All steel parts are galvanized and can be supplied powder coated on
2
request in one of our 192 standard RAL colours.
The bollard can be surface fixed by means of a base plate or below
ground fixed with the anchor piece.
PL AZA BOLL ARD
Part code
Description
04.800.050
Plaza Bollard, corten and stainless steel
04.800.000
Plaza bollard, corten only
S T R E E T F U R N I T U R E : S TA N D U P A N D P L A Z A B O L L A R D
2
PL AZ A BOLL ARD
A beautiful and simple design for use throughout any urban
streetscape. Low maintenance bollard with high visual appeal,
constructed from cylindrical 130mm diameter Cor-ten steel tubing,
and topped off with 140mm diameter stainless steel cap.
The Plaza can be constructed from Cor-ten steel only if required.
Stand Up, Part code 02.290.000
92
Plaza, Part code 04.800.050
50
133
130
200
200
260
1000
800
912
hardwood
80
2
1
1
119
1
1
FA LC O F L AT L I N E B O L L A R D
FA LC O F L AT L I N E
Part code
Description
looking rigid structure fits into virtually any street. Constructed from
02.120.040
FalcoFlatline bollard, fixed, total length 1300mm
steel and galvanized it’s appeal and versatility can be added to by
02.120.700
additional charge for powdercoating in RAL colour
choosing one of our 192 standard powder coating RAL colours.
02.120.200
FalcoFlatline bollard, fixed, length 900mm, with
The trend towards tighter form continues and this innovative
base plate 200x100mm
02.120.720
Can be used alongside the FalcoBloc (pages 34 and 35) or
additional charge for powdercoating bollard
with base plate in RAL colour
FalcoCube (pages 36 and 37) as part of our range of coordinating
2
The FalcoFlatline is also available as cycle stand/leaning bracket
Part code
DO
(page 169).
04.940.800*
Description
Do bollard for below ground installation, total
length 1200 mm, powdercoated in standard
2
RAL colour
DO BOLL ARD
04.940.850*
The Do Bollard has a domed top that is elliptical with truncated cone
mm, powdercoated in standard RAL colour
shaped body all cast from aluminium with an average diameter of
70 mm.
3
The bollard can be supplied with eyebolts for the fastening of chains.
Part code
GRISOU
04.930.800*
It is available in a removable version, which includes a fixed element
Description
Grisou bollard for below ground installation,
total length 970 mm, powdercoated in standard
to be embedded in the ground.
RAL colour
Colour: micaceous grey.
04.931.800*
Grisou bollard with base plate, total length 800
04.932.800*
Grisou bollard, removable, length from surface
Overall dimensions: Ø80x1200 mm high (1000h above ground).
3
Do bollard, removable, length from surface 1000
mm, powdercoated in standard RAL colour
800 mm, powdercoated in standard RAL colour
GRISOU BOLL ARD
Overturned U shaped bollard formed from galvanised steel tubing
You can choose from 11 standard colours:
60 x 30mm section, provided with steel eyebolts for attaching chain
RAL 1007, daffodil yellow
link.
RAL 3005, wine red
RAL 4004, violet bordeaux
Grisou is available with a base plate for surface fixing, extended for
RAL 5013, cobalt blue
RAL 6009, pine green
RAL 3000, fire red
below ground installation or removable from a fixed base.
RAL 6005, moss green
RAL 6029, mint green
Overall dimensions are 200 x 60 x 800mm high.
RAL 7016, anthracite grey
RAL 9005, deep black
RAL 9007, grey aluminium
S T R E E T F U R N I T U R E : FA L C O F L AT L I N E , D O A N D G R I S O U
street furniture.
3
1
2
121
1
1
FA LC O F L AT L I N E B O L L A R D
FA LC O F L AT L I N E
Part code
Description
looking rigid structure fits into virtually any street. Constructed from
02.120.040
FalcoFlatline bollard, fixed, total length 1300mm
steel and galvanized it’s appeal and versatility can be added to by
02.120.700
additional charge for powdercoating in RAL colour
choosing one of our 192 standard powder coating RAL colours.
02.120.200
FalcoFlatline bollard, fixed, length 900mm, with
The trend towards tighter form continues and this innovative
base plate 200x100mm
02.120.720
Can be used alongside the FalcoBloc (pages 34 and 35) or
additional charge for powdercoating bollard
with base plate in RAL colour
FalcoCube (pages 36 and 37) as part of our range of coordinating
2
The FalcoFlatline is also available as cycle stand/leaning bracket
Part code
DO
(page 169).
04.940.800*
Description
Do bollard for below ground installation, total
length 1200 mm, powdercoated in standard
2
RAL colour
DO BOLL ARD
04.940.850*
The Do Bollard has a domed top that is elliptical with truncated cone
mm, powdercoated in standard RAL colour
shaped body all cast from aluminium with an average diameter of
70 mm.
3
The bollard can be supplied with eyebolts for the fastening of chains.
Part code
GRISOU
04.930.800*
It is available in a removable version, which includes a fixed element
Description
Grisou bollard for below ground installation,
total length 970 mm, powdercoated in standard
to be embedded in the ground.
RAL colour
Colour: micaceous grey.
04.931.800*
Grisou bollard with base plate, total length 800
04.932.800*
Grisou bollard, removable, length from surface
Overall dimensions: Ø80x1200 mm high (1000h above ground).
3
Do bollard, removable, length from surface 1000
mm, powdercoated in standard RAL colour
800 mm, powdercoated in standard RAL colour
GRISOU BOLL ARD
Overturned U shaped bollard formed from galvanised steel tubing
You can choose from 11 standard colours:
60 x 30mm section, provided with steel eyebolts for attaching chain
RAL 1007, daffodil yellow
link.
RAL 3005, wine red
RAL 4004, violet bordeaux
Grisou is available with a base plate for surface fixing, extended for
RAL 5013, cobalt blue
RAL 6009, pine green
RAL 3000, fire red
below ground installation or removable from a fixed base.
RAL 6005, moss green
RAL 6029, mint green
Overall dimensions are 200 x 60 x 800mm high.
RAL 7016, anthracite grey
RAL 9005, deep black
RAL 9007, grey aluminium
S T R E E T F U R N I T U R E : FA L C O F L AT L I N E , D O A N D G R I S O U
street furniture.
3
1
2
121
1
S T R E E T F U R N I T U R E : FA L C O G R A N I T E
2
2
1
FA LC O G R A N I T E B O L L A R D
1
FA LC O G R A N I T E B O L L A R D
Part code
Description
Smooth and clean lined demarcation bollard offering a
07.021.015
FalcoGranite bollard in smooth/chiseled,
Mediterranean feel for Town Squares, Plaza’s , or any
black granite
pedestrianised areas, also offers the opportunity to be used as
2
seating if required.
FA LC O G R A N I T E PAW N
Part code
Description
07.020.015
FalcoGranite pawn, polished, black granite
Overall height is 450 mm.
The square block (300x300x300 mm) can be sunk below the
boulder.
FA LC O G R A N I T E P R O D U C T S
Falco can now offer a range of granite products this has been
influenced by a growing trend towards natural/organic look
products from solid materials such as concrete or stone.
2
FA LC O G R A N I T E PAW N
A round granite sphere offering timeless appeal to any location.
Overall diameter of 600mm.
The advantages that can be obtained from the use of these
materials are their stability, strength against vandalism, and very low
maintenance costs. The granite was already proved successful as an
The sphere rests on a square area with the dimensions
600x600x75mm that can be sunk below the boulder.
element in our Triangle range.
[email protected]
Bollard, Part code 07.021.015
Pawn, Part code 07.020.015
Ø 250
650
635
450
10x45°
75
200
10x45°
600
300
122
1
1
MOON BOLL ARD
The Moon is especially suitable as a demarcation of pedestrianised
areas, and deposition along sidewalks and quays. It can be used
MOON
Part code
Description
04.915.000
Moon bollard of cast iron, height 40cm,
diameter 300mm, weight 31 kilo
as an alternative to rows of bollards and adds a beautification to a
townscape.
2
SFERA
Moon is formed from cast iron as standard black RAL 9005.
Part code
Description
The Moon is 300 mm round and has a total height including the
39.808.x00*
Sfera bollard, engraved
base of 420 mm.
39.808.x08*
Sfera bollard, sandblasted
39.808.x09*
Sfera bollard, smooth
39.840.000
SFER A BOLL ARD
anchor tube to be anchored below the sphere
and after fixation to be poured with concrete,
A striking sphere which is not only useful for demarcation but also
length 600mm
embellishment of a streetscape.
The ball can have eye bolts added to enable chain link to be used.
There is a choice of 5 colours which are recognized by the
6th. figure of the Part code:
It is available in 3 finishes engraved, textured or smooth, the base of
xx.xxx.0xx = pink
xx.xxx.1xx = grey
the ball is flat.
xx.xxx.2xx = green
xx.xxx.3xx = salt and pepper
The Sfera has a diameter of 450 mm and 400 mm high,
xx.xxx.5xx = yellow
Moon, Part code 04.915.000
Sfera, Part code 39.808.x0x
Ø450
400
420
Ø300
STREET FURNITURE: MOON AND SFERA
2
1
2
123
STREET FURNITURE: CHAIN BOLLARDS
1
3
2
1
CHAIN BOLLARD
1
Part code
Description
C H A I N B O LL A R D 110 0M M
A simple 60 mm round steel chain post with two welded eyes and
02.460.102
Chain bollard, fixed, total length 1100mm
a plastic cap. Height 1100 mm including 300 mm below ground
02.460.700
additional charge for powdercoating of post RAL
anchor element.
2
CHAIN BOLLARD
2
Part code
Description
03.150.000
Chain bollard, total length 1500mm
C H A I N B O L L A R D 15 0 0 M M
An attractive and secure chain post with a tubing diameter of 60
03.150.700
additional charge for powdercoating of post RAL
mm. Fitted as standard with two welded chain eyes at 180°.
03.150.200
Chain bollard, total length 1500mm,
Height above ground 1200mm.
in white 2K coating and 2 reflecting red bands
3
This chain post is available both in simple hot-dip galvanised finish,
MOBILE CHAIN BOLL ARD
Part code
Description
or hot-dip galvanised and coated white. Equipped with 2 red
02.466.000
Chain bollard, movable steel, with container feet
reflecting bands for good visibility. Other RAL colours are, of course,
300x300x100mm with two handles
also an option.
02.466.700
additional charge for powdercoating of post RAL
Part code
02.460.102
Part code
03.150.000
Part code
02.466.000
3
MOBILE CHAIN BOLL ARD
An ideal solution for a temporary demarcation.
The post has a diameter of 60 mm and is provided with welded tray
of 300x300x100 mm.
The tray can be filled with sand or cement.
Ø60
With the welded handlebars you can move the post around.
900
900
1200
60
Ø60
100
WWW.FA LC O.CO . U K
124
300
210
200
300
1
1
CHAINS
All options listed in part box opposite.
CHAINS
Part code
Description
03.905.002
steel, electrogalvanised chain coated in red and
white, colourchange every 50 cm, thickness of link
2
C Y L I N D E R LO C K S
Falco supplies euro profile cylinders including three keys to the
6 mm
standard of DIN. According to DIN 18252, RAL 1811, with 6 pins.
03.906.000
steel ship chain, thickness of link 6 mm
These are quality locks which fit the Falco products.
03.906.006
plastic chain red/white, thickness of link 6 mm
03.908.000
steel chain link thickness 8 mm
03.908.700
additional charge of powdercoating chain
The keys cannot be reproduced without us supplying the blind key!
03.908.000 in RAL colour
seperate steel connection link
In addition to tough cylinder locks we also have available padlocks
03.906.101
separate steel S-hook
of the same quality. Suitable for the U-lok bicycle support, chains,
03.906.103
separate steel S-hook coated in red
demarcation posts etc.
03.906.201
separate steel pinch connecting link
03.906.405
separate stainless steel carbine hook dimension
3
PA D LO C K S
60x6 mm
The lock bode is 50 mm with a solid ring and three keys.
2
C Y L I N D E R LO C K S
Part code
Description
03.990.000
half europrofile cylinder, keyed differently with 3
FILM
keys, ordered directly with Falco product
Call our sales department for prices.
03.990.009
separate extra key for half Europrofile cylinder,
keyed differently
03.990.010
half Europrofile cylinder, keyed alike with 3 keys,
03.990.019
separate extra key for half Europrofile cylinder,
DID NOT FIND IT?
ordered directly with Falco product
Could not find what you were looking for?
Please ask us.
keyed alike
In this catalogue only standard items are shown.
3
But there is more!
Part code
PA D LO C K S
03.993.000
Description
brass padlock with 50 mm case, keyed differently,
STREET FURNITURE: CHAINS AND LOCKS
03.908.020
with 3 keys
03.993.010
brass padlock with 50 mm case, keyed alike,
with 3 keys
1
2
3
1
1
125
3
S T R E E T F U R N I T U R E : S E N T RY B O L L A R D
2
1
1
S E N T R Y B O L L A R D, F I X E D
1
S E N T R Y B O L L A R D, F I X E D
Part code
Description
The 70 x 70 x 3mm Sentry bollard is used frequently as a barrier
03.130.010
Sentry bollard, fixed, total length 1100mm
along pavements, verges, street corners and many other varied
03.130.210
Sentry bollard, fixed, total length 1150mm,
locations. Supplied as standard hot dip galvanized or hot dip
in white 2K coating with 2 reflecting red bands
2
S E N T R Y B O L L A R D, F O L D - D O W N
Part code
Description
03.126.200
Sentry bollard with anchor part 300mm,
03.126.260
03.127.200
03.129.200
S E N T R Y B O L L A R D, F O L D D O W N
The Sentry fold-down bollard has various fastening options:
Sentry bollard with base plate for concrete floor,
*
Unlocking with a separately ordered triangular key in a
in white coating and 2 red bands
non-standard size. When placed upright, the bollard clicks
Sentry bollard, cylinder lock, with anchor part
into the lock automatically.
*
Sentry bollard, cylinder lock, with base plate for
Unlocking with a separately ordered half euro profile cylinder
with 3 keys. You can also use your own half euro profile
concrete floor, in white coating and 2 red bands
cylinder. When placed upright, the bollard has to be locked with
Sentry bollard, padlock system, with anchor piece,
the key.
coated white with 2 red reflecting bands
03.129.260
2
in white coating and 2 red band
300mm, in white coating and 2 red bands
03.127.260
galvanized and powder coated in white with 2 red reflective bands.
Height is 900mm.
Sentry bollard, padlock system, ground-mounting
*
Unlocking and locking with your own padlock or with the sturdy
Falco padlock with 3 keys (order separately).
base plate, coated white with 2 red reflecting bands
All models are hot-dip galvanised or hot-dip galvanised and coated
03.190.000
triangular key
white and equipped with 2 red reflecting bands. The base plate is
03.990.000
half euro profile cylinder, keyed differently
made of steel and is extremely stable. The hinge is well-protected
03.990.010
half euro profile cylinder, keyed alike
from the wheels of vehicles by the base plate.
03.993.100
brass padlock, keyed differently
The dimensions of the post are 70x70 mm. Available with an anchor
03.993.110
brass padlock, keyed alike
piece to embed in a concrete base or with a base plate with holes for
3
S E N T R Y B O L L A R D, R E M OVA B L E
Part code
Description
03.102.070
Sentry bollard with anchor piece
mounting on the ground.
Sentry bollard, coated white with 2 red reflecting
3
S E N T R Y B O L L A R D, R E M OVA B L E
Ideal barrier bollard for all situations where the bollard needs to be
bands, with anchor piece
removed quickly and easily with the triangular key to be ordered
03.102.700
additional charge for powdercoating in RAL colour
separately. No key or similar is required in order to return the
03.190.000
triangular key
bollard. When returned, the post clicks into the lock.
03.191.043
separate square base sleeve
03.194.000
lockable cover
03.102.270
The Sentry bollard is made of 70x70 mm profile and is 900 mm
high. Order base socket art.no. 03.191.043 separately. This bollard
is hot-dip galvanised or hot-dip galvanised and coated white and
equipped with 2 red reflecting bands.
126
1
1
B LO C K I N G B O L L A R D
B LO C K I N G B O L L A R D
Part code
Description
accessibility need to be combined. The blocking bollards are used as
02.420.000
Blocking bollard, height 900 mm
protection and demarcation in industry. The bollards are 110 mm
02.420.700
An excellent solution for those situations where security and
Additional charge for powder coating in a
RAL colour
square and removable. They can be locked with a padlock (not
included). When they have been removed, a lid covers the base
02.420.100
socket. Height 900 mm above ground, total 1200 mm.
2
Loose base socket, length 300 mm
T E L E SC O P I C B O L L A R D
Part code
Description
Equipped with 2 sturdy handles for easy handling. An additional
02.220.000
Square telescopic bollard, with a reflecting film
loose base socket is ideal for storing the removed bollard safety and
03.190.000
Triangular key
2
TELESCOPIC BOLL ARD
The square 90x90 mm telescopic bollard is easy to operate with a
special key unlocking after opening a small cap. On installation the
top is virtually level with the ground.
The base sleeve is round and 140 mm with a flange at the top. The
height of the bollard above ground level is 900 mm.
Furthermore the steel is hot-dip galvanized and provided with a
telescopic post
Part code 02.220.000
reflecting film in red and white. The base sleeve has to be concreted
900
in at site.
900
blocking post
Part code 02.420.000
310
1110
109
140
STREET FURNITURE: BLOCKING AND TELESCOPIC BOLLARD
neatly.
1
1
2
2
2
127
1
STREET FURNITURE: HYDRA AND DEDRA BOLLARD
1
1
2
1
HYDRA BOLLARD
1
HYDR A BOLL ARD
Part code
Description
A familiar sight in many towns and villages for years. The fastening
02.472.000
Hydra bollard, height above ground level 900mm
with a threaded spindle allows the Hydrabollard to be fixed securely.
02.472.700
additional charge for powdercoating of post
Particularly suitable for situations where the bollard has to be
in RAL colour
removed occasionally. Made of circular 76mm tubing and 900mm
02.472.200
Hydra bollard, height above ground level
high. Base socket ordered separately.
03.190.000
triangular key
Available both powder-coated in white with red bands and just
02.479.100
loose base sleeve length 500mm
hot-dip galvanised. Unlocking and locking is only possible with the
02.479.200
cover for base sleeve
Falco triangular key.
900mm, white with 2 red reflecting bands
2
DEDRA BOLLARD
Part code
2
Description
02.980.000
Dedra bollard, fixed, total length 1130mm
02.980.060
Dedra bollard, fixed, lenth 900mm from base
plate 180x180mm
DEDR A BOLL ARD
A functional demarcation bollard for every situation to guide or hold
back traffic. This hot dip galvanised bollard has a diameter of 76 mm
and a plastic cap, with a length of 1100 mm to install below ground,
or 900 mm from base plate (180x180mm).
02.980.700
additional charge for powdercoating of post
02.980.756
additional charge for powdercoating in RAL
in RAL colour
As an option, the bollard can be powdercoated in a standard RAL
colour or provided with a white coating and two red reflective tapes.
9010, colour: white, with 2 reflecting red bands
Hydra,
Part code
02.472.200
Dedra,
Part code 02.980.000
Dedra,
Part code 02.980.060
900
900
Ø76
900
Hydra,
Part code
02.472.000
200
Ø76
Ø76
140
180
128
1
3
S E N T I N E L 1 B O L L A R D, F I X E D
S E N T I N E L B O L L A R D, R E M OVA B L E
The circular steel barrier posts are particularly effective.
The attractive, circular posts with a diameter of 83 mm are very
In addition, they are also good to look at, thanks to the neat finish.
popular with County Councils and Businesses.
The tubing diameter is 60 mm.
Combined with the fixed version (see above) this series of posts
Height above ground 920 mm. Available with concrete bases of
offers an excellent solution to your access control problems.
various dimensions.
The removable post is unlocked with the special triangular key (art.
The post is hot-dip galvanised or hot-dip galvanised and coated
no. 03.190.000). Order base socket art.no. 03.291.043 separately.
white and provided with 2 wide red reflecting bands.
The additional option of powder-coating in a standard RAL colour
means you have a practical and eye-pleasing solution to your access
2
control problem within reach.
S E N T I N E L 2 B O L L A R D, F I X E D
in many towns and villages because of the simple but robust design
1
and excellent in-ground element. Standard length above ground is
Part code
S E N T I N E L 1 B O L L A R D, F I X E D
Description
800 mm. The anchor piece is 430 mm long.
03.140.010
Sentinel 1 fixed bollard, totale length 1100mm
This post comes hot-dip galvanised as standard, but is -of course-
03.140.210
also available coated in a standard RAL colour for an additional
2
charge.
Part code
03.140.010
Part code
03.220.020
Sentinel 1 fixed bollard, totale length 1100mm,
in white 2K coating with 2 reflecting red bands
Part code
03.222.020
S E N T I N E L 2 B O L L A R D, F I X E D
Part code
Description
03.220.020
Sentinel 2 fixed post, total length 1200mm
03.220.700
additional charge for powdercoating post in RAL
colour
S E N T I N E L B O L L A R D, R E M OVA B L E
Part code
Description
03.222.020
Sentinel removable bollard with triangular locking
system, total length 1030mm
800
1000
920
3
03.222.640
additional charge for powdercoating in white,
200
200
180
with 2 red reflecting bands
03.222.700
additional charge powdercoating post in RAL colour
03.190.000
special triangular key
03.291.041
separate round base sleeve, length 410mm
03.292.000
additional charge for fixation of combined white
STREET FURNITURE: SENTINEL BOLLARDS
The attractive circular 83mm diameter posts have already been used
and red reflecting band onto post
1
3
2
129
1
STREET FURNITURE: DEVIOTORE AND MIGNON BOLLARD
1
2
1
D E V I OTO R E
CONCRETE BOLL ARDS
Part code
Description
Falco delivers five different models of concrete bollards. Every
39.800.x00*
Deviotore bollard, engraved
model has its own specific design, but with the same purpose, to
2
protect pedestrian precincts or to determine public or private areas.
MIGNON
Part code
39.806.x00*
The bollards are available with different surface treatments.
Description
Mignon bollard, diameter 400mm,
height 400mm, engraved
39.806.x08*
Mignon bollard, diameter 400mm,
height 400mm, sandblasted
39.806.x09*
Mignon bollard, diameter 400mm,
height 400mm, smooth
39.807.x00*
Mignon bollard, diameter 500mm,
height 500mm, engraved
39.807.x08*
Mignon bollard, diameter 500mm,
height 500mm, sandblasted
39.807.x09*
Mignon bollard, diameter 500mm,
height 500mm, smooth
There is a choice of 5 colours which are recognized by the
6th. figure of the Part code:
xx.xxx.0xx = pink
xx.xxx.1xx = grey
xx.xxx.2xx = green
xx.xxx.3xx = salt and pepper
All models are equipped with eye-bolts for easy transportation
which can be removed after placing
1
D E V I AT O R E
Elegance in the protection or demarcation of pedestrian precincts
and of public or private areas.
Balanced design with refinement. Smooth base diameter 440 mm
and total height 680 mm, weight 45 kg.
2
MIGNON
The domed top Mignon is conspicuous and may be used as a
parking barrier or in pedestrian areas.
Available in two versions: height 400 mm, Ø 400 mm, weight
90 kg and height 500 mm, Ø 500 mm, weight 190 kg.
xx.xxx.5xx = yellow
Deviatore, Part code 39.800.x00
Mignon, Part code 39.806.x00
400
680
Ø 400
Ø 440
130
1
PUFFO
Both a bollard and somewhere to sit (the top is smooth) the
cylindrical bollard has a leading edge chamfered at 45 °.
1
PUFFO
Part code
Description
39.801.x*08
Puffo bollard, diameter 400 mm, height 500 mm,
weight 115 kg, sandblasted
With galvanised eye-bolts for movement or linking chain.
39.802.x*08
Available in two versions: height 500 mm, Ø 400 mm, weight
115 kg or height 500 mm, Ø 500 mm, weight 136 kg.
2
PA R M A
Part code
2
PA R M A
Description
39.805.x*00
39.805.x*08
Parma bollard, diameter 400 mm,
39.805.x*09
Parma bollard, diameter 400 mm,
height 700 mm, smooth
On request the Parma is also available without the 50 mm anchor so
3
that it can be movable (weight 160 kg).
Part code
C YC LO P S I S
Description
The standard Parma has a total height of 700 mm inclusive of the 50
39.740.x*00
Cyclopis bollard, elliptical shape, 530x500x320
mm anchor, a diameter of 400 mm and a weight of 165 kg.
mm (hxwxd)
39.741.x*00
3
C YC LO P S I S
The bollard for pedestrian precinct. Its elliptical shape and
Cyclopis bollard, round shape, 530x500x500 mm
(hxwxd)
composition offer a very agreeable and function alternative to other
There is a choice of 5 colours which are recognized by the
6th. figure of the Part code:
commonplace solutions.
xx.xxx.0xx = pink
xx.xxx.1xx = grey
xx.xxx.2xx = green
xx.xxx.3xx = salt and pepper
It has a rectangular base 300x220x30 mm and has eye-bolts for
xx.xxx.5xx = yellow
movement. Installation is achieved by the use of a threaded base
fixed at an insert at the base of the bollard at 200 mm.
WWW.FA LC O.CO.U K
S T R E E T F U R N I T U R E : P U F F O , PA R M A A N D C Y C L O P S I S B O L L A R D S
height 700 mm, sandblasted
anchor with diameter of 350 mm. At the base an opening is incorporated for an anchor to facilitate permanent fixing.
Parma bollard, diameter 400 mm,
height 700mm, bush hammered
The Parma is available in smooth or sandblasted finish and is
cylindrical of shape with a domed top. The lower part has a 50 mm
Puffo bollard, diameter 500 mm, height 500 mm,
weight 136 kg, sandblasted
1
2
3
131
1
S T R E E T F U R N I T U R E : M O N E T, C I M A A N D D A R A P L A N T E R S
2
3
2
1
MONET PL ANTER
Part code
Description
1
MONET
Part of a coordinated collection the main characteristics of the
32.760.800*
Monet Aluminium planter Height 935 mm
products are the delicate and essential figures.
32.760.820*
Monet Cast Iron planter Height 935 mm
The floral relief and perforated texture give the surfaces a vibrant
32.761.800*
Monet Aluminium planter Height 2300 mm
sensation, where the formal and functional aspects fit together.
32.761.820*
Monet Cast iron planter Height 2300 mm
The Monet planters are part of a collection that has impressionist
32.762.800*
Monet Aluminium planter Height 550 mm
echoes and gives elegance and personality to urban spaces.
32.762.820*
Monet Cast iron planter Height 550 mm
They are formed from cast iron or aluminium and are available in
2
three different heights and three designs.
CIMA PL ANTER
Part code
Description
32.773.800*
Cima Round planter 406 mm
32.774.800*
Cima Round planter 609 mm
32.775.800*
Cima Round planter 960 mm
32.776.800*
Cima Rectangular planter 1000 x 400 mm
You can choose from 11 standard colours:
RAL 1007, daffodil yellow
C O - O R D I N AT E D P R O D U C T S
Benches page no. 40.
Litter bins page no. 86.
Bollards page no. 116.
2
CIMA
RAL 3000, fire red
All elements of the Cima range use concave steel profiles. As a result
RAL 3005, wine red
RAL 4004, violet bordeaux
of the clean imagery and form’s the ‘design line’ is neutral enabling
RAL 5013, cobalt blue
RAL 6009, pine green
the products to blend perfectly in both historical and
RAL 6005, moss green
RAL 6029, mint green
contemporary contexts.
RAL 7016, anthracite grey
RAL 9005, deep black
The Cima planters are available in a rectangular and round
RAL 9007, grey aluminium
3
implementation.
DA R A P L A N T E R
Part code
Description
32.780.800
Dara planter powder coated in RAL 8019
C O - O R D I N AT E D P R O D U C T S
Benches page no. 22.
Litter bins page no. 86.
Bollards page no. 117.
[email protected]
3
DA R A
The Dara is an exceptional planter, the upper part is based on a
square which moves downwards into a circle it rests on the four
small feet. All four sides are perforated at regular intervals with a 9
squares pattern.
Height: 500 mm, length and width 745 mm, Ø 745 mm. Standard
powder coating in RAL 8019 greybrown.
132
1
1
IONA PLANTER
A stunningly beautiful planter for an impressive statement.
Circular planter in low maintenance Cor-ten steel available as a
IONA
Part code
Description
32.710.000
Iona planter concave, in corten steel Ø1500mm x
550mm high
concave (drawing) or convex (photo) shaped versions.
32.711.000
The hole in the top is in the shape of a figure eight.
Iona planter convex, in corten steel Ø1500mm x
800mm high
2
2
C ARINA PLANTER
Stainless steel triangular sectioned planter with arched sides made
up of three 100 x100mm support pillars and rounded and conical
CARINA
Part code
Description
05.913.000
Carina planter, upper part in Mogano wood,
height 500mm
telescoping.
3
3
ECO PLANTER
Stainless steel planter with truncated cone clover design, upper
ECO
Part code
Description
05.912.000
Eco planter, upper part in Mogano wood,
height 450mm
frame finished with Mogano wood.
Iona
Part code 32.710.000
Carina
Part code 05.913.000
Eco
Part code 05.912.000
860
960
1500
860
450
500
500
900
570
3
STREET FURNITURE: IONA, CARINA AND ECO PLANTERS
The upper frame is finished in Mogano wood.
1
2
3
1
2
133
1
STREET FURNITURE: BOOMBAK AND COLOGNE PLANTERS
2
1
1
Part code
Description
1
BOOMBAK
The Boombak is an ideal solution to planting in pedestrian areas,
32.200.000
Boombak planter, round 950mm, height 550mm
streets, squares, or even on flat roofs.
32.210.000
Boombak planter, round 1150mm, height 670mm
32.220.000
Boombak planter, round 1310mm, height 800mm
The outside of the planter is enhanced with hardwood slating and
32.230.000
Boombak planter, round 1750mm, height 800mm
can be which is attached to a galvanized steel liner/frame.
32.222.000
round bench for mounting onto planter 32.220.000
To enhance it’s usability seating can be added around the planter.
32.232.000
round bench for mounting onto planter 32.230.000
There are four sizes available in the range.
2
BOOMBAK
P L A N T E R C O LO G N E
Part code
32.720.004
Description
Cologne planter, dimension 1000x1000mm,
height 405mm
32.721.004
Cologne planter, dimension 1000x1000mm,
height 495mm
Cologne planter, dimension 800x800mm,
2
shapes and is constructed from beams of timber for ruggedness and
durability.
Boombak,
Part code 32.200.000
height 405mm
32.726.004
C O LO G N E P L A N T E R
The Cologne planter is available in rectangular, square or hexagonal
Ø950
Cologne planter, dimension 800x800mm,
Cologne planter, dimension 500x1000mm,
height 405mm
32.731.004
550
height 495mm
32.730.004
Cologne planter, dimension 500x1000mm,
height 495mm
32.735.004
height 405mm
32.736.004
Ø880
Cologne planter, hexagonal, diameter 800mm,
Cologne planter, hexagonal, diameter 800mm,
Boombak,
Part code 32.230.000
Ø1750
height 495mm
32.740.004
Cologne planter, hexagonal, diameter 1000mm,
Cologne planter, hexagonal, diameter 1000mm,
height 495mm
32.746.004
800
height 405mm
32.741.004
Cologne planter, hexagonal, diameter 1200mm,
height 495mm
32.747.004
Cologne planter, hexagonal, diameter 1200mm,
height 585mm
134
Ø1666
1
FA LC O B LO C P L A N T E R S
FA LC O B LO C W I T H WO O D
This range of planters is available in three different versions. The
Part code
Description
standard size for all is 1000 x 1000 mm with a height of 600 mm.
32.708.016
FalcoBloc planter with hardwood
They fit perfectly with the FalcoBloc seating (pages 34 and 35).
32.708.700
additional framework powder coating In RAL
2
FA LC O B LO C W I T H S T E E L
All versions are constructed with a galvanised box steel framework
Part code
Description
and are equipped with a galvanized steel plate liner. Other sizes are
32.707.016
FalcoBloc planter with galvanized frame and
available upon request.
powder coated perforated steel side walls in RAL
32.707.700
3
FA LC O B LO C WO O D E N P L A N T E R
This implementation has been carried out with wooden slats, they
parts are 95 mm wide and 19 mm thick. The slats are all perfectly
combined with either the galvanized steel framework or as an option
Part code
Description
32.705.016
FalcoBloc planter with stainless steel side walls
32.705.700
additional framework powder coating in RAL
galvanized and powder coated.
2
FA LC O B LO C S T E E L P L A N T E R
As the name suggests it is identical in design to the wooden planter,
the only exception being the four wooden side walls are replaced
with perforated sheet steel for a raw industrial look.
Part code 32.708.016
1000
These panels can be left galvanized only or blended in with the Local
Authority colours by powder coating in 1 of our 192 standard RAL
840
Perforations are 8mm square.
1000
colours.
3
FA L C O B L O C S TA I N L E S S S T E E L P L A N T E R
All details are as above in the steel planter except that the 4 side
walls are in 316 grade stainless steel.
Benches page no. 34 and 35.
600
C O - O R D I N AT E D P R O D U C T S
S T R E E T F U R N I T U R E : FA L C O B L O C P L A N T E R S
1
additional framework powder coating in RAL
FA LC O B LO C W I T H S TA I N L E S S S T E E L
1
2
1A
135
3
1
2
1
DIAMANTE
Part code
Description
1
DIAMANTE
Hexagonal modules for interlocking layouts and with bases for
39.350.x00*
Diamante planter, total length 1560mm,
different heights.
capacity 235 litre
2
The inside is circular, diameter 920 mm and is water resistant with
SMERALDO
eye bolts included for movement. It is available with a plinth of 200
Part code
Description
39.320.x00*
Smeraldo Cilinder planter, diameter 500mm,
height 480mm, capacity 48 litre, weight 61 kilo
39.321.x00*
Smeraldo Cilinder planter, diameter 600mm,
height 560mm, contents 94 liters
39.322.x00*
Smeraldo Cilinder planter, diameter 600mm,
height 830mm, capacity 136 litre
39.323.x00*
Smeraldo Cilinder planter, diameter 800mm,
height 400mm, capacity 115 litre
39.324.x00*
height 650mm, capacity 210 litre
39.325.x00*
Smeraldo Cilinder planter, diameter 900mm,
height 800mm, capacity 352 litre
39.326.x00*
Smeraldo Cilinder planter, diameter 1000mm,
height 400mm, capacity 191 litre
39.327.x00*
Smeraldo Cilinder planter, diameter 1100mm,
height 410mm, capacity 211 litre
3
essential lines, the Smeraldo offers a wide choice for the urban
environment.
The inside is water resistant and is complete with eyebolts for
movement.
3
LU N A R O S A
The Lunarosa planter looks to be made up of three chambers, the
outside surface has a rough finish with a smooth decorative recess
of 65mm.
The planter is available in two different sizes. The smaller version
500mm high, 600mm wide and 1000mm long, the larger version is
600mm high, 800mm wide, long and 1350mm long.
Also, look at the accompanying bench on page 74.
LUNAROSA
Part code
Description
39.355.x00*
Lunarosa planter, height 500mm,
39.356.x00*
2
SMER ALDO
Available in a range of dimensions and distinguished by round and
Smeraldo Cilinder planter, diameter 800mm,
capacity 210 litre
Lunarosa planter, height 600mm,
capacity 335 litre
There is a choice of 5 colours which are recognized by the
6th. figure of the Part code:
N.B.
We have produced an
expanded brochure showing
all of the “Vasart” range
of products, with some
xx.xxx.0xx = pink
xx.xxx.1xx = grey
great ideas for parks and
xx.xxx.2xx = green
xx.xxx.3xx = salt and pepper
gardens - all for a copy!
xx.xxx.5xx = yellow
136
mm to change the hexagonal height.
EXTERNAL “VASART” FURNITURE
STREET FURNITURE: DIAMANTE, SMERALDO AND LUNAROSA PLANTERS
3
PARTNERS ON A JOURNEY TO URBAN CREATIVITY
1
1
Q UA R Z O
Characterised by features in smooth bas-relief with smooth edges
and rounded end walls.
Q UA R Z O
Part code
Description
39.310.x00*
Quarzo planter, length 1500mm, width 600mm,
height 550mm, capacity 265 litre,
Quarzo planter, thanks to its different sizes and its thickness, is
weight 460 kilo
suitable for furnishing by forming demarcations, or defining
39.311.x00*
pedestrian or special areas.
Quarzo planter, length 1200mm, width 600mm,
height 550mm, capacity 206 litre,
weight 397 kilo
It is excellent as a plant container, thanks to its’ wall thickness, which
39.312.x00*
protect roots from the outside climate.
height 550mm, capacity 127 litre,
With a bridging bench every Quarzo planter can be combined with
weight 283 kilo
39.317.x00*
Quarzo Cilinder planter, diameter 1100mm,
height 550mm, capacity 312 litre,
T O PA Z I O
weight 394 kilo
A traditionally dimensioned planter design for public and private
spaces. The inside is water resistant and eye bolts are included for
39.318.x00*
Quarzo Cilinder planter, diameter 800mm,
height 550mm, capacity 141 litre,
movement.
weight 290 kilo
There are a wide number of sizes to suit each environment.
39.380.x00*
Central planter Quarzo, dimension 1200x1200x
870mm, capacity 859 litre, weight 840 kilo
2
Quarzo, Part code 39.318.x00
TO PA Z I O
Part code
Description
39.330.x00*
Topazio planter, length 400mm, width 400mm,
39.331.x00*
Topazio planter, length 600mm, width 400mm,
height 450mm, capacity 32 litre, weight 68 kilo
height 450mm, capacity 52 litre, weight 90 kilo
39.332.x00*
Topazio planter, length 80 cm, width 400mm,
height 450mm, capacity 73 litre, weight 104 kilo
39.334.x00*
800
800
Topazio planter, length 120 cm, width 400mm,
height 450mm, capacity 115 litre, weight 157 kilo
550
There is a choice of 5 colours which are recognized by the
6th. figure of the Part code:
xx.xxx.0xx = pink
xx.xxx.1xx = grey
xx.xxx.2xx = green
xx.xxx.3xx = salt and pepper
xx.xxx.5xx = yellow
S T R E E T F U R N I T U R E : Q U A R Z O A N D T O PA Z I O P L A N T E R S
a seating area.
2
Quarzo planter, length 800mm, width 600mm,
1
2
137
STREET FURNITURE: TREE PROTECTORS
3
1
2
1
G UA R D I A N
Part code
Description
1
G UA R D I A N
These sturdy tree protectors are available galvanized and can be
32.010.000
Guardian, diameter 350/800mm
powder coated on request in a range of standard RAL colours. It is
32.010.100
Guardian, diameter 350/800mm with fixing
composed of 2 half’s and bolted together with stainless steel bolts.
staves/bolts
32.010.700
additional charge for powder coating in RAL
32.020.000
Guardian, diameter 350/600mm
32.020.700
additional charge for powder coating in RAL
2
Height: 1800mm. Suitable for mounting onto tree grilles
2
DEFENDER
DEFENDER
Part code
Description
Ideal protection for climbing plants or trees, the Defender is a
32.050.000
Defender, height 1100mm,
perfect solution for plants that are being established against walls.
diameter 350/800mm
It can be supplied galvanized only or galvanized and powder coated
32.050.700
additional charge for powder coating in RAL
in a range of standard RAL colours.
32.051.000
Defender, height 1800mm,
diameter 350/800mm
32.051.700
additional charge for powder coating in RAL
32.052.000
Defender, height 1200mm,
diameter 300/470mm
32.052.700
additional charge for powder coating in RAL
32.053.000
Defender, height 1100mm,
diameter 300/470mm
32.053.700
3
additional charge for powder coating in RAL
SICURO
Three heights are available 1100mm, 12000mm and 1800mm.
3
SICURO
Vertical tree guard made of two steel piping curved elements with
diameter 20 mm, and upper extremities blocked by a black and flat
ABS cap, shaped in a semicircular way with the extremities set for
assembly with screws and self-locking nut in stainless steel.
Fastening to the ground is possible thanks to welded and punched
Part code
Description
32.498.800*
Sicuro tree protector, height 1300mm,
steel plates anchored to the ground by means of M8 electro
galvanized dowels or log bolts.
powdercoated in RAL colour
32.499.800*
Sicuro tree protector, height 1800mm,
Overall dimensions low Sicuro: 535 x 1,300 mm.
powdercoated in RAL colour
Overall dimensions high Sicuro: 535 x 1,800 mm.
You can choose from 11 standard colours:
RAL 1007, daffodil yellow
RAL 3005, wine red
RAL 4004, violet bordeaux
RAL 5013, cobalt blue
RAL 6009, pine green
RAL 6005, moss green
RAL 6029, mint green
RAL 7016, anthracite grey
RAL 9005, deep black
RAL 9007, grey aluminium
138
RAL 3000, fire red
1
1
DIANA TREE GRILLE
DIANA
Plants protecting grid with a central hole of 300 mm in diameter,
Part code
Description
made of 2 rectangles of electro forged grid, available with 20x2mm,
32.263.000
Diana tree grille, 800 x 700mm
25x2 mm or 30x2 mm mesh.
32.263.100
steel frame 800 x 700mm
The border of the grid has a plate 20x2 mm thick and a rod
32.264.000
Diana tree grille, 1100 x 1100mm
measuring 5 mm in diameter.
32.264.100
steel frame 1100 x 1100 mm
32.265.000
Diana tree grille, 1500 x 1500mm
The two grids lean on an angular perimeter steel section framework
32.265.100
steel frame 1500 x 1500mm
acting as support.
2
ROUND TREE GRILLE
Circular traditional tree grille made from 30mm thick cast iron in four
Part code
Description
32.252.000
Round tree grille
3
parts with radial design.
Comes with galvanised inlay frame and irrigation cap.
The Round can be either bitumen dipping varnished or powder
coated on request.
STREET FURNITURE: TREE GRILLES
2
ROUND
TRADITION
Part code
Description
32.250.000
Tradition tree grille Radial, with iron frame
32.250.100
Tradition tree grille Round, with iron frame
Outer diameter 1270mm. Inner diameter 600mm.
3
TR ADITION TREE GRILLE
Square traditional tree grille made from 30mm thick cast iron in four
Tradition, Part code 32.250.100
1250
625
parts with round or radial design. On photo 3 you see radial.
625
On the drawing beside you see the round design.
625
Comes with galvanised inlay frame and irrigation cap.
The Round can be either bitumen dipping varnished or powder
Ø6
coated on request.
1250
00
625
Dim. 1270 x 1270mm. Inner diameter 600mm.
[email protected]K
1
2
3
139
1
2
S T R E E T F U R N I T U R E : FA L C O R U B O P R O T E C T O R S
1
2
1
1
Part code
Description
1
FA LC O R U B O P R O T E C T O R
These are formed from 60mm galvanized steel tubing.
38.480.000
FalcoRubo protector, square, 2-part
They are supplied as standard to be concreted in below ground,
38.481.000
FalcoRubo protector, U-model, 1-part
alternatively a 2 part anchor set can be supplied to enable the units
38.482.000
FalcoRubo protector, circular, 2-part
to be fitted into flower beds or similar soil types.
38.483.000
FalcoRubo protector, semi-circular, 1-part
38.484.000
FalcoRubo protector, rhomboid, 2-part
Height above ground 430mm.
38.485.000
FalcoRubo protector, V-model, 1-part
Available in a 3-different models.
38.48x.700
additional charge for powdercoating in RAL colour
38.488.000
anchor set of bended steel plate 400 mm long,
2
FA LC O R U B O
FA L C O R U B O G U I D E R A I L
height 152 mm, width 82 mm with mounting holes
The FalcoRubo guide rails are a handy solution for the protection of
and stainless steel bolts, per set
lawns and gardens, and the demarcation of parking spaces.
They are formed from 60x2 mm galvanized tubing if required they
FA LC O R U B O G U I D E R A I L
can be powder coated in 1 of 192 standard RAL colours.
Part code
Description
38.490.000
FalcoRubo guide rail, length 750mm
38.491.000
FalcoRubo guide rail, length 900mm
38.492.000
FalcoRubo guide rail, length 1200mm
38.493.000
FalcoRubo guide rail, length 1500mm
The height above ground 430mm.
WWW.FA LC O.CO. U K
38.494.000
FalcoRubo guide rail, length 1800mm
38.494.700
additional charge for powdercoating in RAL colour
Part code
38.480.000
750
140
2
Part code
38.481.000
750
Part code
38.482.000
750
Part code
38.483.000
750
Part code
38.484.000
750
Part code
38.485.000
750
1
1
FA LC OA R M O R
The FalcoArmor is a straightforward tree protector composed of two
galvanized flat steel rings of 50x6 mm, they are connected to 3 x 42
FA LC OA R M O R
Part code
Description
31.210.000
FalcoArmor tripod tree protector diameter 450mm,
total height 1200mm
mm galvanized steel tubes by stainless steel bolts. These uprights are
1200mm high and are buried into soil surrounding trees or plants, or
31.210.700
additional charge for powdercoating in RAL colour
can be concreted in for other applications.
2
FA LC OA RC
All galvanized steel parts can be powder coated in a range of 192
Part code
Description
standard RAL colours.
31.205.000
FalcoArc barrier of tubing 60mm, total height
1300mm, width at the base 920mm
2
31.205.700
FA LC OA R C
additional charge for powdercoating in RAL colour
S T R E E T F U R N I T U R E : FA L C O A R M O R A N D FA L C O A R C P R O T E C T O R S
The FalcoArc is derived by bending 60mm galvanized steel tubing
into a triangular profile, it is an ideal protection system for walls,
plants or buildings against parking cars.
Overall height is 1300mm, concreted into the ground.
All galvanized steel parts can be powder coated in a range of 192
standard RAL colours.
FalcoArmor, Part code 31.210.000
WWW.FA LC O.CO.U K
FalcoArc, Part code 31.205.000
=50x6
800
Ø 450
150
500
1200 / 1500
Ø 60
920
2
1
141
S T R E E T F U R N I T U R E : FA L C O R A N G E R A N D FA L C O R I N G P R O T E C T O R S
1
2
1
1
FA LC O R A N G E R
1
FA LC O R A N G E R
Part code
Description
The FalcoRanger semi-circle protector is formed from heavy duty
31.270.000
FalcoRanger semi-circular heavy duty barrier,
102mm galvanized steel tubing. It has a radius of 550mm with an
width 1100mm c.t.c. height 1650mm
overall height of 1650mm of which 800mm is buried below ground
additional charge for powdercoating in RAL colour
or concreted in. It is and ideal protector for trees or columns against
31.270.700
2
cars, vans and trucks.
FA LC O R I N G
All galvanized steel parts can be powder coated from a range of 192
Part code
Description
31.220.000
FalcoRing barrier diameter 1000mm,
standard RAL colours.
including 4 anchorsticks
31.220.700
additional charge for powdercoating in RAL colour
2
FA LC O R I N G
The FalcoRing comes in two parts and is constructed from 60mm
galvanised steel tubing with a diameter of 1000mm it has 4 uprights
whose overall height is 750mm of which 200mm is buried below
ground or concreted in.
All galvanised steel parts can be powder coated from a range of 192
standard RAL colours.
FalcoRanger, Part code 31.270.000
FalcoRing, Part code 31.220.000
547
150
90
°
800
25°
1000
Ø 12
200
800
550
Ø 102
800
1094
142
1
1
FA LC O P I LO T
The FalcoPilot is a functional and yet extremely effective guide rail,
manufactured from 42mm galvanised steel tubing that can be on
FA LC O P I LOT
Part code
Description
02.100.000
FalcoPilot guide rail with intermediary tube,
02.101.000
FalcoPilot guide rail with intermediary tube,
02.102.000
FalcoPilot guide rail with intermediary tube,
02.103.000
FalcoPilot guide rail with intermediary tube,
02.104.000
FalcoPilot guide rail with intermediary tube,
02.105.000
FalcoPilot guide rail with intermediary tube,
02.106.000
FalcoPilot guide rail with intermediary tube,
02.10x.700
additional charge for powdercoating in RAL colour
width 1200mm, total height 1100mm
request powder coated in a range of 192 standard colour ranges.
width 1500mm, total height 1100mm
Uses for the FalcoPilot are many and varied, it is available either with
extended tubes for below ground installation or with welded base
width 1800mm, total height 1100mm
plates, a removable version is also available.
2
width 2100mm, total height 1100mm
FA LC O P I LO T C O N T I N U O U S
width 2400mm, total height 1100mm
Made from 48mm galvanised steel tubing that can be powder
coated on request in range of 192 standard RAL colours.
width 2700mm, total height 1100mm
The system has start and end uprights, and intermediate, corner and
width 3000mm, total height 1100mm
T-uprights, which provide optimum flexibility.
2
FA LC O P I LOT C O N T I N I U O U S
2 loose straight tubing elements,
FalcoPilot
1200
400
1200
2300/2600
between uprights
02.146.001
FalcoPilot with two vertical struts, length 1100mm
02.146.002
FalcoPilot with two vertical struts, length 1400mm
02.146.003
FalcoPilot with two vertical struts, length 1700mm
02.146.004
FalcoPilot with two vertical struts, length 2000mm
02.146.005
FalcoPilot with two vertical struts, length 2300mm
02.146.006
FalcoPilot with two vertical struts, length 2600mm
02.146.007
FalcoPilot with two vertical struts, length 2900mm
02.146.70x
additional charge for powdercoating in RAL colour
4000
1500/1800
2000
Part code
800
1200
S T R E E T F U R N I T U R E : FA L C O P I L O T
For all types of demarcation and trolley bays etc.
1200
1
1
1
2
2
2
143
STREET FURNITURE: BOWLER GUIDE BARRIERS
BOWLE R GUIDE BARRIE R
BOWLER GUIDE BARRIER WITH
Part code
Description
02.970.000
start/end upright for straight tubing elements
Part of the Bowler coordinated range other products available
02.970.020
intermediate upright for straight tubing elements
seating, litter bins and bollards.
02.970.040
T-upright for straight tubing elements for 3
expansions
Connecting guide barriers with straight cross-bars. On these
02.970.060
corner upright for straight tubing elements
connecting guide barriers the uprights are linked by two straight
02.970.700
STR AIGHT ELEMENTS
additional charge for powdercoating upright
tubes. The centre to centre distance of the posts depends on the
in RAL colour
intermediary piece. The posts stand 1020 mm above ground level,
2 loose straight tubing elements,
with a 380 mm anchor part or 100x200 mm base plate.
Part code
between uprights
02.146.001
with two vertical struts, length 1100 mm
One end of the 47.5 mm diameter cross bar is welded to the post
02.146.002
with two vertical struts, length 1400 mm
and sticks out for 200 mm from the heart of the post. An aluminim
02.146.003
with two vertical struts, length 1700 mm
coupling piece takes care of the fixation for the tubing elements.
02.146.004
with two vertical struts, length 2000 mm
02.146.005
with two vertical struts, length 2300 mm
02.146.006
with two vertical struts, length 2600 mm
02.146.007
with two vertical struts, length 2900 mm
02.146.70x
additional charge for powdercoating in RAL colour
C O - O R D I N AT E D P R O D U C T S
Bollards page no. 112 and 113.
Litter bin page no. 100.
Cycle parking system no. 188.
Bowler guide barrier
1400
1800
144
400
1400
1800
200
900
1400
200
380
900
350
start/end
uprights
intermediate
T-
corner
1
1
BOWLER CROSS GUIDE R AIL
Part of the Bowler coordinated range other products available
seating, litter bins and bollards.
BOWLER CROSS GUIDE R AIL
Part code
Description
02.925.007
barrier fence with St. Andrew’s cross,
posts c.t.c. 1200 mm
The St. Andrew’s cross of tubes 30x20x2 mm is welded between a
lower and upper tube of 40x40x2 mm.
The side posts have a 200 mm anchor part or a 180x180x10 mm
02.925.700
additional charge for powdercoating in RAL colour
02.926.000
barrier fence with St. Andrew’s cross,
posts c.t.c. 1500 mm
base plate.
The low picture in blue shows a special with intermediate posts!
02.926.700
2
additional charge for powdercoating in RAL colour
B O W L E R C U RV E D G U I D E R A I L
Description
On these connecting guide barriers, the uprights are connected with
start/end post, total length 1050 mm
curved tubing with a diameter of 60x2 mm, bevelled at the bottom.
02.930.700
additional charge for powdercoating in RAL colour
The height of the post above ground level is 820 mm. Shown on the
02.931.010
intermediary post, total length 1050 mm
picture with base plates, with anchor piece in the description.
02.931.700
additional charge for powdercoating in RAL colour
02.932.010
T-post, total length 1050 mm
02.932.700
additional charge for powdercoating in RAL colour
02.933.010
corner post, total length 1050 mm
02.933.700
additional charge for powdercoating in RAL colour
02.938.012
curved tubing element to go between posts,
02.938.712
additional charge for powdercoating in RAL colour
02.938.015
curved tubing element to go between posts,
02.938.715
additional charge for powdercoating in RAL colour
02.938.018
curved tubing element to go between posts,
02.938.718
additional charge for powdercoating in RAL colour
B O W L E R C U RV E D G U I D E R A I L
You can have an anchor piece of 200 or 400 mm, or a base plate of
200x6 mm. Between the post and the curved tubing there are two
aluminium couplings.
length c.t.c. 1200 mm
start/end
uprights
intermediary
T-
corner
length c.t.c. 1500 mm
1020
length c.t.c. 1800 mm
STREET FURNITURE: BOWLER GUIDE RAILS
Part code
02.930.010
2
1
2
1
2
145
STREET FURNITURE: GUIDE RAIL
GUIDE RAIL
GUIDE R AIL
Part code
Description
Guide rails protect pedestrians, cars, cyclists, shop windows, facades,
02.540.000
guide rail, tubing diameter 47,5 mm,
warehouse racks, machines and much more.
length 900mm, total height 1250mm
Guide rails are always clearly a barrier, add in addition to protection
additional charge for powdercoating in RAL colour
also ensure effective routing of pedestrians, bicycles and cars.
02.540.700
guide rail, tubing diameter 47,5 mm,
The Falco guide rails are made of top grade ungalvanised tubing.
length 1200mm, total height 1250mm
Once all working such as cutting, drilling and bending is completed,
02.541.700
additional charge for powdercoating in RAL colour
the rails are hot-dip galvanised in accordance with EN-ISO 1461.
02.542.000
guide rail, tubing diameter 47,5 mm,
The rails are available in 3 tubing diameters, namely 47.5 mm, 60.3
length 1500mm, total height 1250mm
mm and 76.1 mm (page 147), and in 7 standard lengths.
02.541.000
02.542.700
02.543.000
additional charge for powdercoating in RAL colour
guide rail, tubing diameter 47,5 mm,
All guide rails are now also available with an extra cross-bar.
length 1800mm, total height 1250mm
The tubing diameter is thereby the same as the guide rail on
02.543.700
additional charge for powdercoating in RAL colour
Ø 47.5 mm and Ø 60.3 mm. On the Ø 76.1 mm rails the cross-bar
02.560.000
guide rail, tubing diameter 60,3 mm,
has a diameter of 60 mm.
length 900mm, total height 1250mm
02.560.700
additional charge for powdercoating in RAL colour
Call our product specialists to find our price and delivery time.
02.561.000
guide rail, tubing diameter 60,3 mm,
Naturally the guide rails can be powdercoated in a standard RAL
length 1200mm, total height 1250mm
colour after hot-dip galvanising for a small additional charge.
additional charge for powdercoating in RAL colour
Another option with base plates is also available.
02.561.700
02.562.000
guide rail, tubing diameter 60,3 mm,
length 1500mm, total height 1250mm
02.562.700
02.563.000
additional charge for powdercoating in RAL colour
guide rail, tubing diameter 60,3 mm,
length 1800mm, total height 1250mm
Now also available in stainless steel with a diameter
of 48.3 mm and 60.3 mm. Please ring for prices.
Part code 02.561.000
additional charge for powdercoating in RAL colour
350
900
02.563.700
N.B.
1200
146
1
1
GUIDE R AIL
These guide rails are offered with a diameter of 76.1 mm in
galvanized steel tubing, can be powder coated in any of 192
GUIDE RAIL
Part code
Description
02.570.000
guide rail, tubing diameter 76.1 mm,
length 900mm, total height 1250mm
standard RAL colours.
02.571.000
Available in 8 standard lengths as listed.
guide rail, tubing diameter 76.1 mm,
length 1200mm, total height 1250mm
02.572.000
length 1500mm, total height 1250mm
2
BASE SLEEVE
All the guide rails can be offered in a removable form, without any
guide rail, tubing diameter 76.1 mm,
02.573.000
guide rail, tubing diameter 76.1 mm,
length 1800mm, total height 1250mm
further modifications to the rails and with simple tools.
02.574.000
guide rail, tubing diameter 76.1 mm,
guide rail, tubing diameter 76.1 mm,
length 2400mm, total height 1250mm
02.576.000
[email protected]
guide rail, tubing diameter 76.1 mm,
length 2700mm, total height 1250mm
02.577.000
guide rail, tubing diameter 76.1 mm,
length 3000mm, total height 1250mm
02.57x.700
2
BA SE SLE EVE WITH COMPRE SSION FIXING
Part code
Description
02.305.000
length 200 mm, for tubing Ø 41.5 mm
02.315.000
length 200 mm, for tubing Ø 47.5 mm
02.325.000
length 200 mm, for tubing Ø 60.3 mm
02.335.000
length 200 mm, for tubing Ø 76.1 mm
02.306.000
length 500 mm, for tubing Ø 41.5 mm
02.316.000
length 500 mm, for tubing Ø 47.5 mm
02.326.000
length 500 mm, for tubing Ø 60.3 mm
02.336.000
length 500 mm, for tubing Ø 76.1 mm
350
900
Part code 02.570.000
additional charge for powdercoating in RAL colour
STREET FURNITURE: GUIDE RAIL
length 2100mm, total height 1250mm
02.575.000
900
1
2
1
2
1
147
1
STREET FURNITURE: BARRIERS
2
2
3
R OTAT I N G B A R R I E R S
Part code
Description
R O TAT I N G B A R R I E R
The barriers that can be turned away are available in lengths of
03.361.000
rotating barrier, length 1500mm, with 1 traverse
1000, 1500, 2000 and 2500 mm.
03.361.700
additional charge for powdercoating in RAL colour
The height above ground is 900 mm. The uprights are 70x70 mm
03.361.200
rotating barrier, length 1500mm, with 1 traverse,
and the traverse 60x40 mm. One of the uprights is provided with a
coated in white with red tapes
quick fastening system and triangular key.
03.362.000
rotating barrier, length 2000mm, with 1 traverse
03.362.700
additional charge for powdercoating in RAL colour
03.362.200
rotating barrier, length 2000mm, with 1 traverse,
coated in white with red tapes
03.363.000
rotating barrier, length 2500mm, with 1 traverse
03.363.700
additional charge for powdercoating in RAL colour
03.363.200
rotating barrier, length 2500mm, with 1 traverse,
coated in white with red tapes
03.371.000
rotating barrier, length 1500mm, with 2 traverses
03.371.700
additional charge for powdercoating in RAL colour
03.371.200
rotating barrier, length 1500mm, with 2 traverses,
coated in white with red tapes
03.372.000
rotating barrier, length 2000mm, with 2 traverse
03.372.700
additional charge for powdercoating in RAL colour
03.372.200
rotating barrier, length 2000mm, with 2 traverse,
03.373.000
rotating barrier, length 2500mm, with 2 traverse
03.373.700
additional charge for powdercoating in RAL colour
03.373.200
rotating barrier, length 2500mm, with 2 traverse,
coated in white with red tapes
coated in white with red tapes
148
03.190.000
triangular key
03.191.043
separate square base sleeve, length 430mm
The barriers are hot dip galvanised and can be powder-coated in a
RAL colour. White coating with red reflective tape is often wanted
because of its visibility.
The base sleeves (450mm long) to receive the uprights can be
grouted in. You need an extra base sleeve for a second fixation point
when f.e. the barrier is open for a longer period. You can have one
or two traverses.
Part code 03.372.2000
2000
PROTEC TION BARRIER
Ideal in areas where protection of vulnerable and not to mention
valuable/costly plant and machinery and buildings walls is vital.
P R OT E C T I O N B A R R I E R
Part code
02.790.000
protection profile barrier out of folded steel sheets
thick 3mm, length 2500mm
The Protection barrier offers extensive defense against all types of
vehicles including cars, vans, lorries and fork lift trucks.
Description
02.790.700
additional charge for powdercoating in RAL colour
02.794.000
protection profile barrier out of folded steel sheets
thick 3mm, length 2000mm
The barrier is supplied as standard in galvanised steel, but can be
powder coated on request to match surrounding buildings in a
02.794.700
additional charge for powdercoating in RAL colour
choice of 192 standard RAL colours.
02.796.000
steel intermediate post for protection profile barrier,
total length 1000mm
02.796.010
steel end post for protection profile barrier,
total length 1000mm
or with base plates.
02.796.020
steel corner post for protection profile barrier,
total length 1000mm
02.796.700
additional charge for powdercoating post
in RAL colour
01538-380080
10
740
Part code 02.790.000
STREET FURNITURE: BARRIERS
It can be supplied with extended supports for below ground fixing
149
1A
STREET FURNITURE: BARRIERS
1A
1B
1B
GUIDE TUBE
TUBE BARRIER
Part code
Description
Since it’s launch the Tube Barrier has been extensively used by our
02.680.230
Tube barrier, length 1500mm, height 200mm
customers through out Europe. The fine form and the solid-looking
02.680.700
additional charge for powdercoating in RAL colour
protection offers and stylish and simple solution to all areas.
02.681.230
Tube barrier, length 1500mm, height 900mm
Originally designed as a project specific product we are pleased to
02.681.700
additional charge for powdercoating in RAL colour
02.682.230
Tube barrier, length 2000mm, height 200mm
02.682.700
additional charge for powdercoating in RAL colour
02.686.230
Tube barrier, length 2000mm, height 900mm
02.686.700
additional charge for powdercoating in RAL colour
now offer it as part of our standard range.
The Tube Barrier is made up of a galvanised steel tube of 219mm
diameter welded to 2 uprights available in heights of 200mm
(photo’s 1A) or 900mm (photo’s 1B).
It can be supplied with extended supports for below ground
installation or with base plates.
W W W . F A L C O . C O .UK
Part code 02.680.230
Part code 02.686.230
2000
1500
250
900
Ø76,1
1500
200
Ø76,1
250
150
1000
250
250
GUIDE TUBE BARRIE R
GUIDE TUBE BARRIER
For heavier protection against unwanted vehicle access, the con-
Part code
Description
struction consists of a round 193.7mm traverse welded
02.690.000
guide tube on 2 supports to grout in, length
3000 mm, total height 800 mm
to round supports 90 mm. The tube ends are closed and the
02.690.214
standard length is 3000 mm.
guide tube on 2 supports, length 3000 mm,
height 600 mm from welded base plates
180x180 mm
Available for below ground installation in two heights: 600 and
02.690.700
750 mm or with base plates.
02.691.000
guide tube on 2 supports to grout in, length
3000 mm, total height 950 mm
The tube barrier can be powder coated in one of 192 standard RAL
02.691.214
steel tube on 2 supports, length 3000 mm,
height 750 mm from welded base plates
180x180 mm
02.691.700
additional charge for powdercoating in RAL colour
Part code 02.690.000
3000
600
closed
closed
STREET FURNITURE: BARRIERS
colours.
additional charge for powdercoating in RAL colour
350
950
Ø90
2100
151
S T R E E T F U R N I T U R E : PA R K I N G S PA C E P O S T
2
2
1
1
PA R K I N G S PAC E P O S T
1
PA R K I N G S PAC E P O S T
Part code
Description
Simple post with panel for Logo or Text, constructed from
02.480.000
parking space reservation post
galvanised steel and powder coated on request in a choice of 192
02.480.700
additional charge for powdercoating frame
standard colours.
in a RAL colour
Extended supports for below ground installation.
2
R E S E RVAT I O N F R A M E
Part code
2
Description
02.613.000
tube frame for art.no. 02.616.000
02.613.700
additional charge for powdercoating frame
in a RAL colour
02.616.000
steel plate to mount inside frame
02.616.700
additional charge for powdercoating frame
R E S E RVAT I O N F R A M E
The Reservation frame is constructed from 48mm galvanised steel
tubing and a galvanised steel plate 550 x 120mm it can be powder
coated on request in a choice of 192 standard colours.
Height above ground is 800mm. Should be supplied powder coated
to maintain good adhesion for added text.
in a RAL colour
02.617.099
additional charge for text on powder-coated plate
02.616.000 _________ (colour) letters;
text _______________
Part code 02.480.000
Part code 02.613.000 + 02.616.000
600
Part code
02.616.000
800
110
520
Ø 47,5x2
480
556
152
610
600
400
Part code
02.613.000
PA R K I N G C L I C K B A R S
PA R K I N G C L I C K B A R S
The Falco parking bar has been an excellent solution for many years.
At 950 mm wide and 450 mm high, the bar ensures that your
Part code
Description
02.622.000
Parking click bar, hot-dip galvanised, varying
02.622.050
Parking click bar, hot-dip galvanised, same
combination cylinder, weight approx. 8 kg
parking space is always available.
Supplied complete with a half euro profile cylinder with 3 keys. You
combination cylinder, weight approx. 8 kg
thereby have the choice of cylinders keyed differently or alike.
The cylinder is protected by a rubber piece.
02.622.101
prefab concrete slab, for parking click bar
Handily packaged in a box with a drilling template for fixation on a
02.622.700
additional charge for powdercoating parking
click bar in a RAL colour
concrete surface. The bar can be colour powder-coated in a standard
02.622.160
RAL colour for an additional charge.
totally disappears when down. You then do not trip over and the
bar is not damaged when run over.
The slab weight 295 kg and has the bolts included.
A set of 4 red reflecting bands makes the bar more noticable in
upright position.
Part code 02.622.000
460
950
STREET FURNITURE: CLICK BARS
Optionalley you can choose a prefab concrete slab in which the bar
set of 4 red reflecting bands, 50 mm wide, applied
325
1042
153
STREET FURNITURE: TURNSTILE BARRIERS
anti
clockwise
FA LC O T U R N S T I L E
clockwise
FA LC O T U R N S T I L E
Part code
Description
A simple and attractively priced turnstile.
03.020.000
turnstile, height 1000 mm
Supplied as standard with a diameter of 1200 mm and a height of
03.020.700
additional charge for powdercoating in
1000, 1250, 1500 or 2000 mm. Positioning is simple, thanks to the
a RAL colour
welded steel 300x300x10 mm base plate.
03.021.000
turnstile, height 1250 mm
03.021.700
additional charge for powdercoating in
The pillar is stable with a tubing diameter of 90 mm.
a RAL colour
The tubing of the wings is Ø 41.5x2 mm.
03.022.000
turnstile, height 1500 mm
03.022.700
additional charge for powdercoating in
To force passers-by to go one way there are the rotation restricters
‘clockwise’ or ‘anti-clockwise’.
a RAL colour
03.023.000
03.023.700
turnstile, height 2000 mm
additional charge for powdercoating in
N.B.
a RAL colour
03.024.000
To be combined with the FalcoPilot guide rails of
page 143.
additional charge for rotation
restricter 4x90 degrees anti-clockwise
03.025.000
additional charge for rotation
restricter 4x90 degrees clockwise
Part code 03.020.000
Part code 03.021.000
Part code 03.022.000
Part code03.023.000
1200
1200
1650
1200
154
2000
350
1150
1500
1250
350
350
350
1000
650
900
1200
1
1
SWING BARRIER
Swing barriers are often used in conjunction with the Kissing gate,
particularly in those situations where vehicles still need occasional
S WING BARRIE R
Part code
Description
02.911.000
steel swing barrier, total height above
02.911.700
additional charge for powdercoating
ground level 900 mm
access for maintenance.
swing barrier in a RAL colour
The swing barrier can be secured with your own padlock.
2
Net clearance 3000 mm.
K I S S I N G G AT E
Part code
N.B.
Description
steel Kissing gate comprising:
Also available in shorter lengths on request.
post, crossbar and bolt, hot-dip galvanised
additional charge for powdercoating
STREET FURNITURE: SWING BARRIER
02.901.700
Swing barrier, Part code 02.911.000
Kissing gate in a RAL colour
50
2
K I S S I N G G AT E
Alongside the impeding role played by guide rails, it is also often
900
200
Ø89
3064
1100
Ø60
desirable to prevent access by bicycles and mopeds. To this end,
Falco has been supplying the Kissing gate for many years.
Wherever cyclists and moped riders improperly use ‘rat runs’, they
can now be barred with the Kissing gate, as a result of which
3203
pedestrians can once again use these pedestrian paths unimpeded
and with a sense of security.
Kissing gate, Part code 02.901.000
Pushchairs, prams and wheelchairs can all pass through the gate.
Bicycles and mopeds cannot. Operation is simple: a pram is pushed
into the gate, is turned, the crossbar is moved and the pram can
pass through the gate.
1620
740
Not all prams and wheelchairs can pass through
400
N.B.
900
the gate with a 750 mm gap.
200
Ask the sales department about the possibilities.
1
2
2
155
STREET FURNITURE: BARRIERS
M A N UA L B A R R I E R
Part code
Description
M A N UA L B A R R I E R
The barriers are used a great deal on market squares, leisure sites,
06.040.100
manual barrier, 4 metres clear width
service roads, industrial sites, camp sites and in forests. On the one
06.040.751
manual barrier, 4 metres clear width, barrier in
hand as security, and on the other, to prevent or control access.
white powdercoating with red horizontal film
06.050.100
manual barrier, 5 metres clear width
06.050.751
manual barrier, 5 metres clear width, barrier in
white powdercoating with red horizontal film
06.060.100
manual barrier, 6 metres clear width
06.060.751
manual barrier, 6 metres clear width, barrier in
white powdercoating with red horizontal film
06.070.100
manual barrier, 7 metres clear width
06.070.751
manual barrier, 7 metres clear width, barrier in
white powdercoating with red horizontal film
06.080.000
latching post on base plate 200x100x8 mm
06.080.700
additional price for powdercoating of post in
RAL colour
06.085.000
aluminium hinge post mounted under barrier
03.993.000
brass padlock with 50 mm case, keyed differently,
The pillar is made of 100x60 mm steel tubular section and fitted
with 300x300 base plates with anchor bolt holes at a centre to
centre distance of 200 mm for M16 anchor bolts. The barrier is
made of anodised F22 aluminium, specially octagonally profiled.
The barrier revolves on a stainless steel axis with a diameter of 30
mm. All the steel elements are hot-dip galvanised.
These barriers can be locked with a padlock in both open and closed
position. The barriers can also be coated white, and are then
furnished with red film in the centre of the barrier along the full
length on both sides.
All barriers are produced with a counterweight and friction clutch.
This has been a tried and tested system for optimum ease of use for
many years.
with 3 keys
manual barrier
clear width 5 metres
Part code 06.050.100
100
Part code 06.085.000
156
1000
950
M A N UA L S W I V E L T U R N S T I L E
M A N UA L S W I V E L B A R R I E R
Comprising a hot-dip galvanised pillar and an aluminium octagonal
barrier.
Part code
Description
06.130.000
manual swivel barrier, length 3 metres
06.130.751
manual swivel barrier, length 3 metres, in white
powdercoating with red horizontal film
In a closed position the barrier has to be locked with a padlock at
the latching post. With another latching post you can also lock the
06.140.000
manual swivel barrier, length 4 metres
barrier in the open position. This post also has a base plate to fix
06.140.751
manual swivel barrier, length 4 metres, in white
powdercoating with red horizontal film
below ground level.
06.150.000
manual swivel barrier, length 5 metres
06.150.751
manual swivel barrier, length 5 metres, in white
manual swivel barrier, length 6 metres
06.160.751
manual swivel barrier, length 6 metres, in white
W W W . F A L C O . C O .UK
powdercoating with red horizontal film
06.170.000
06.170.751
manual swivel barrier, length 7 metres
manual swivel barrier, length 7 metres, in white
powdercoating with red horizontal film
06.114.000
03.993.000
latching post with padlock facility
brass padlock with 50 mm case, keyed differently,
STREET FURNITURE:
powdercoating with red horizontal film
06.160.000
with 3 keys
1000
4750
4190
MANUAL SWIVEL BARRIER
manual swivel barrier, length 4 metres
480
157
STREET FURNITURE: BARRIERS
R AISE D BARRIE R
Part code
Description
R AISED BARRIER
This system consists of 2 types of pillar with “catchers”. Uprights
06.180.024
column 120x120mm, total length column 2400mm
made of square steel tubular sections, with base plate.
06.173.000
crossbar, length 3000mm
06.173.756
crossbar, length 3000mm, powdercoated in RAL
The aluminium barrier is 140x90 mm. On both sides of the barrier
the text: “MAX. HEADROOM ... CM”, in adhesive letters.
9010 - white with red reflecting square films
06.174.000
06.174.756
Letter height 50 mm, colour black.
crossbar, length 4000mm
crossbar, length 4000mm, powdercoated in RAL
The uprights are available in 120x120 mm or 140x140 mm
9010 - white with red reflecting square films
06.175.000
crossbar, length 5000mm
06.175.756
crossbar, length 5000mm, powdercoated in RAL
depending on the overal height.
Base plates of 300x300x10 mm are welded under the uprights for
fixation 250 mm below ground level.
9010 - white with red reflecting square films
06.176.000
06.176.756
crossbar, length 6000mm
crossbar, length 6000mm, powdercoated in RAL
9010 - white with red reflecting square films
2x Part code 06.180.024 + 1x Part code 06.174.000
4000
2150
2000
profile 140x90
250
120x120
158
1
A LU M I N I U M F L AG P O L E
1
A L U M I N I U M F L AG P O L E Ø 6 0 M M
Part code
Description
08.006.2x0
Aluminium Flagpole Ø 60mm, length 6 metres
profile. Flagpoles with a length above ground of 4, 5, 6 and 7
08.007.2x0
Aluminium Flagpole Ø 60mm, length 7 metres
meters are supplied with a diameter of 60 mm, while the 7 and 8
08.820.060
Fixing Sleeve with base plate for Ø 60mm
meters are available with a 90 mm diameter. The top finial is
08.820.061
Fixing sleeve with concrete foot for Ø 60mm
supplied as standard in black.
08.822.060
Tilting base with anchor plate for Ø 60mm
08.822.061
Tilting base with concrete foot for Ø 60mm
The Falco aluminium flagpoles is supplied in many different versions
and models . They are constructed from an extruded Aluminium
Available in a white-coated aluminum or plain finish.
Anchoring can be with a socket or with a tilting base, these can be
1
A L U M I N I U M F L AG P O L E Ø 9 0 M M
Description
08.207.2x0
Aluminium Flagpole Ø 90mm, length 7 metres
08.208.2x0
Aluminium Flagpole Ø 90mm, length 8 metres
The flagpoles with a diameter of 90 mm are also available with a
08.820.090
Fixing Sleeve with base plate for Ø 90mm
internal housing for use in public space where the flagpole may
08.820.091
Fixing sleeve with concrete foot for Ø 90mm
attract attention for vandalism, the cord runs through the interior
08.822.090
Tilting base with anchor plate for Ø 90mm
of the mast and is only accessible with a key in the side of the mast.
08.822.091
Tilting base with concrete foot for Ø 90mm
The cord height can be adjusted through this flap.
2
2
3
A N T I VA N DA L I S M M E C H A N I S M
F L AG P O L E W I T H B A N N E R H O L D E R
We can now offer flagpoles with a banner holder, the extender is
available in either a 60mm or 90 mm diameter and is equipped with
a wear-resistant, double ball bearing system.
The mast is available with a tilting arrangement.
A N T I VA N DA L I S M M E C H A N I S M
Part code
Description
08.200.005
For Ø 90mm Flagpole
3
F L AG P O L E W I T H B A N N E R H O L D E R
Part code
Description
08.200.025
Banner Holder for Ø 60mm & Ø 90mm
STREET FURNITURE: FLAGPOLES
Part code
supplied with a concrete foot or embedded into a block.
159
STREET FURNITURE: FLAGPOLES
A L U M I N I U M F L AG P O L E
Part code
Description
A LU M I N I U M F L AG P O L E
The conical aluminum flagpoles are ideal if you hang out a flag
08.407.215
Conical Aluminium Flagpole powder coated,
regularly and not for just one off occasions or anniversaries.
08.407.255
Conical Aluminium Flagpole non powder coated,
This classic style mast has a slim design and fits into any
7 metres Ø 114 - 60mm
environment. Thanks to the special production process, this flagpole
Conical Aluminium Flagpole powder coated,
is manufactured to a very high quality, so making intensive use not a
8 metres Ø 114 - 60mm
problem. Standard with orange finial, and black nylon cleat and cord
08.408.255
Conical Aluminium Flagpole non powder coated,
guider.
08.409.215
Conical Aluminium Flagpole powder coated,
The conical mast is available in the following lengths: 5, 6, 7, 8, 9,
7 metres Ø 114 – 60mm
08.408.215
8 metres Ø 114 - 60mm
9 metres Ø 114 – 60mm
10 and 12 meters. For the assembly we advise the tilting system
08.409.255
Conical Aluminium Flagpole non powder coated,
which is available for a quick system.
08.822.100
Tilting base plate for Ø 114mm Flagpole
Available in both a clear anodized implementation and white coated
08.410.215
Conical Aluminium Flagpole powder coated,
finish.
08.410.255
Conical Aluminium Flagpole non powder coated,
08.822.135
Tilting base plate for Ø 135mm Flagpole
08.412.215
Conical Aluminium Flagpole powder coated,
9 metres Ø 114 - 60mm
10 metres Ø 135 – 60mm
10 metres Ø 135 - 60mm
12 metres Ø 145 – 60mm
08.412.255
Conical Aluminium Flagpole non powder coated,
12 metres Ø 145 - 60mm
08.822.145
160
Tilting base plate for Ø 145mm Flagpole
1
1
FA LC O R O T O M A S T
FA LC O R OTO M A S T
The Falco Rotomast is new to the range and is formed from strong
Part code
Description
profiled aluminium with a diameter of 90 mm and is equipped with
08.426.215
Aluminium Rotomast Ø90mm with 360º rotating
an right angled extension bar or banner holder that rotates 360°.
banner holder 6 metres with orange finial
08.427.215
The banner holder can swivel smoothly with the wind direction,
but it also ensures that the flag/banner stays clearly visible. An
Aluminium Rotomast Ø90mm with 360º rotating
banner holder 7 metres with orange finial
08.428.215
Aluminium Rotomast Ø90mm with 360º rotating
lowered to change the banner.
08.429.215
Aluminium Rotomast Ø90mm with 360º rotating
With the use of polyurethane rings as a counterweight it ensures the
08.822.090
advantage with the Rotomast is that the mast does not need to be
banner holder 8 metres with orange finial
banner holder 9 metres with orange finial
plate for Ø 90mm
The masts are coated in white.
2
2
C O N I C A L P O LY E S T E R F L AG P O L E
A mast made from a modern material (Polyester) a Traditional form.
The properties reinforced Polyester, means the mast is flexible,
lightweight and very hard wearing.
C O N I C A L P O LY E S T E R F L AG P O L E
Part code
Description
08.456.215
6 metre long, diameter 100 – 65mm
08.457.215
7 metre long, diameter 100 – 65mm
08.458.215
8 metre long, diameter 100 – 65mm
08.459.215
9 metre long, diameter 100 – 65mm
08.460.215
10 metre long, diameter 135 – 65mm
The flagpole comes as standard with an orange finial, frog cleat and
08.462.215
12 metre long, diameter 135 – 65mm
cord all parts are with non-corroding. The flagpole comes with 5
08.826.000
Tilting base for flagpoles up to 9 metres
metres of cord with core. We advise the use of the tilting base. The
08.827.000
Tilting base for flagpoles 10 – 12 metres
Falco polyester flagpoles are available from 5 meters to a length of
no more than 18 meters.
STREET FURNITURE: FLAGPOLES
flag is always tight along the mast.
Aluminium Rotomast with tilting base with anchor
The standard masts are white. But is also available in almost all RAL
and PMS pantone colours.
The masts are coloured during the production process and are also
UV-resistant coated The flagpoles are manufactured to the standard
set out in BS 6096.
1
2
1
161
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement