4. Complete Movements & Kits STANDARD QUARTZ MOVEMENTS

4. Complete Movements & Kits  STANDARD QUARTZ MOVEMENTS
4. Complete Movements & Kits
4.
1.
Complete Movements & Kits
Quartz & Mechanical movements. Insertion & public movements.
STANDARD QUARTZ MOVEMENTS
Complete with fixing nut, hanger, washer etc. Takes standard I-shaft hands (5mm round hour & 2.8 x 3.5mm oval minute) Needs 10mm centre
hole. Requires AA battery.
STANDARD QUARTZ MOVEMENT: 12mm SHAFT Case 57mm wide X 52mm high. 17mm deep.
Hanger, rubber washer and brass nut to hold the movement to the dial supplied. Dial thickness, 0.25-3.5mm.
Sec. shaft, 0.8mm. Supplied with nut to hold the minute hand on, through which the second hand shaft
passes. If no second hand, blind nut may be used, pt no. 0615 000515
STANDARD QUARTZ MOVEMENT: 16mm SHAFT Case 57mm wide X 52mm high. 17mm deep.
Hanger, rubber washer and brass nut to hold the movement to the dial supplied. Dial thickness, 3.5-7mm.
Sec. shaft, 0.8mm. Supplied with nut to hold the minute hand on, through which the second hand shaft
passes. If no second hand, blind nut may be used, pt no. 0615 000515
STANDARD QUARTZ MOVEMENT: 21mm SHAFT Case 57mm wide X 52mm high. 17mm deep.
Hanger, rubber washer and brass nut to hold the movement to the dial supplied. Dial thickness, 7-11mm.
Sec. shaft, 0.8mm. Supplied with nut to hold the minute hand on, through which the second hand shaft
passes. If no second hand, blind nut may be used, pt no. 0615 000515
STANDARD QUARTZ MOVEMENT: 26mm SHAFT Case 57mm wide X 52mm high. 17mm deep.
Hanger, rubber washer and brass nut to hold the movement to the dial supplied. Max dial thickness, 14mm.
Sec. shaft, 0.8mm. Supplied with nut to hold the minute hand on, through which the second hand shaft
passes. If no second hand, blind nut may be used, pt no. 0615 000515
0473 000315
0473 000115
0473 000215
0473 000515
Price per unit in £ on 28/03/2016
1+
5+
Pack of 10
Pack of 100
£2.45
1+
5+
Pack of 10
Pack of 100
£2.45
1+
5+
Pack of 10
Pack of 100
£2.45
1+
5+
Pack of 10
Pack of 100
£5.55
£2.20
£2.08
£1.96
£2.20
£2.08
£1.96
£2.20
£2.08
£1.96
£4.99
£4.72
£4.44
tablebreak
HIGH TORQUE QUARTZ MOVEMENT
Price per unit in £ on 28/03/2016
HIGH TORQUE QUARTZ MOVEMENT For applications with longer than average hands, these have 0633 000115
more strength than standard movements. Maximum dial thickness, 7mm. AA battery required. Normal Ishift quartz hands fit the shafts.
1+
3+
Pack of 10
£5.39
£4.85
£3.77
tablebreak
24 HOUR MOVEMENTS
24 HOUR QUARTZ MOVEMENT Quartz, with 24 hour motion work suitable for dials numbered 1 24.
Price per unit in £ on 28/03/2016
1039 000115
£12.03
1+
tablebreak
CHIMING QUARTZ MOVEMENT
Price per unit in £ on 28/03/2016
CHIMING QUARTZ MOVEMENT Movement: 110mm wide, 28mm hand shaft, 105mm high
1045 000115
excluding hanger & pendulum support. Remote mounted speaker: 72mm wide, 58mm high, 22mm thick,
with 245mm lead wires. Adjustable pendulum length, max.300mm. May also be used without pendulum.
Requires 2 x 'C' batteries, not supplied.
Quartz movement with a choice of Westminster, 4x4 Westminster, 4x4 Ave Maria or Bim-Bam strike
modes. Include a volume control knob, a "night silent" (no chimes from 11pm to 5.45am) 24hour On or
Off'. The high quality sound is played through a small separate loudspeaker that can be mounted directly to
the case. Excellent sound reproduction. Pendulum facilities are included as standard (length from centre to
bottom, max 475mm), with brass bob and rod. Dials upto 13mm may be used. Full operating instructions
are supplied.
£77.50
1+
tablebreak
MINI QUARTZ MOVEMENT
Price per unit in £ on 28/03/2016
9.5mm shaft length
MINI QUARTZ MOVEMENT: SUPPLIED WITH A SECONDS HAND We sell hands specifically
1409 009515
designed for this movement: See chapter 6, ref. 1409 for suitable hands. Hour collet 3.4mm round. Minute
collet 1.9mm round. Case diameter 52mm. Depth 17mm. Dial hole required 8mm. Max dial thickness
3mm.
£21.95
1+
tablebreak
QUARTZ CUCKOO MOVEMENT
Complete quartz movement with speaker unit, bird with opening doors, dummy weight shells, hands and pendulum. Suitable case size 140 x
170 x 7.5mm. Hand shaft to pendulum tip 260mm. Requires 2 x D cells not supplied.
QUARTZ CUCKOO MOVEMENT Complete quartz movement with speaker unit, bird with opening
doors, dummy weight shells, hands and pendulum. Suitable case size 140 x 170 x 7.5mm. Hand shaft to
pendulum tip 260mm. Requires 2 x D cells not supplied.
1470 000115
Price per unit in £ on 28/03/2016
£74.30
1+
tablebreak
ACCESSORIES FOR QUARTZ MOVEMENTS
Price per unit in £ on 28/03/2016
RUBBER WASHERS FOR QUARTZ MOVEMENTS 25 extra rubber washers.
0644 002515
1+
£3.24
BLIND NUTS FOR QUARTZ MOVEMENTS 5 Blind I-shaft nuts for use when no second hand is
used.
0615 000515
1+
2+
Pack of 10
£1.50
£1.35
£1.27
tablebreak
© M&P 2014 ¦ Meadows & Passmore Ltd, 1 Ellen St, Brighton BN41 1EU Tel. 01273 421321 Fax. 01273 421322 ¦
4-1
4. Complete Movements & Kits
ANTI CLOCKWISE MOVEMENT
Price per unit in £ on 28/03/2016
ANTI CLOCKWISE MOVEMENT For novelty clocks. Similar to a standard unit, but runs anticlockwise. Maximum dial thickness, 7mm. AA battery required. I-shaft.
0567 000115
1+
0530 000115
1+
2+
£5.95
tablebreak
PENDULUM DRIVE UNIT
Price per unit in £ on 28/03/2016
PENDULUM DRIVE UNIT Fits on our standard quartz unit (not included), to turn it into a pendulum
movement. The pendulum has no bearing on the timekeeping. AA battery required. Rod length 250mm.
(320mm from hand shaft to bottom of bob) 55mm bob. Contained in black box, length 140mm, width
60mm.
£10.90
£8.72
tablebreak
VIENNA MOVEMENTS, SPRING DRIVEN
Striking on half hour & full hours, complete with 150mm dial, clock hands, grid pendulum with bob, 12cm spiral gong , mounting bracket and key. Depth incl. handshaft 90mm.
With silencing lever.
Call
1
2
3
HARVEY
on
0800 328 9435
maestrocard.jpg
M&P
Buy Online
@
Key Suppliers to
Clockmakers
www.m-p.co.uk
Price per unit in £ on 28/03/2016
1 SPRING WOUND VIENNA MOVEMENT B Pendulum length 25cm. Bob diameter 63mm. Pendulum swing 13cm.
0667 000215
2 SPRING WOUND VIENNA MOVEMENT D Pendulum length 37cm. Bob diameter 80mm. Pendulum swing 16.5cm.
0667 000415
3 VIENNA MOVEMENT 14 Day regulator movement, spring-driven with strike on wire gong at half and full hours. Complete 0667 000515
set with diameter 150mm dial, clock hands, grid pendulum with bob, wire gong (12cm diameter), mounting bracket and winding
key. With silencing lever. Pendulum length: 21.5cm. Bob Diameter: 63mm.
1+
£309.16
1+
£298.19
1+
£294.34
tablebreak
CUCKOO MOVEMENTS
Replacement units for cuckoo clocks. Complete with chains, weights, 240mm wooden pendulum, hand nut & washer. Half hour and full hour
striking. Hands, Dial & Gong not included.
CUCKOO MOVEMENT 1 DAY 275g weights. Weight drop 1720mm. Width 75mm Height 83mm. Hand 1006 300015
shaft to top of movement 42mm.
CUCKOO MOVEMENT 8 DAY 1500g weights. Weight drop 2570mm. Width 85mm. Height 93mm.
1006 080015
Hand shaft to top of movement 42mm.
Price per unit in £ on 28/03/2016
1+
£105.27
1+
£181.14
tablebreak
FRENCH CLOCK TRANSFORMATION KIT
FRENCH CLOCK TRANSFORMATION KIT
A kit to make use of old French clocks that have lost their cases. Using simple hand tools, you can make
use of a French movement that has lost its marble case and create an attractive mantle clock. The kit
includes reeded brass pillars, finials, studding etc. but not the dome or base as these depend on the model
of clock used. Full instructions supplied.
Price per unit in £ on 28/03/2016
0659 000115
1+
£57.09
tablebreak
8 DAY MOVEMENTS, SPRING DRIVEN
Time only. Suitable for dials up to 12mm thick. 8mm centre hole. Complete with polished brass pendulum and key. Pendulum length is from
hand shaft to tip of rod.
8 DAY MOVEMENT 135mm SPRING DRIVEN TYPE A 43mm Bob. Swing 90mm.
8 DAY MOVEMENT 270mm SPRING DRIVEN TYPE C 55mm Bob. Swing 120mm.
0761 135015
0761 273015
Price per unit in £ on 28/03/2016
1+
£93.35
1+
£110.90
tablebreak
19TH CENTURY MORBIER MOVEMENT
Copy of a typical 19c Morbier movement with iron cage and 4 pillars. Supplied with cord and weight hooks. Strikes half and hours on a cast
brass bell. Requires 4.2kg weight. Suitable wall bracket is part number 1085 000115.
19TH CENTURY MORBIER MOVEMENT ONLY A very good reproduction of the original
movement.
MORBIER MOVEMENT COMPLETE WITH SIDE PANELS AND HANDS. A very good
reproduction movement.
Price per unit in £ on 28/03/2016
1143 000115
1+
£323.97
1144 000215
1+
£345.97
0647 000215
0647 000415
1+
N/A
1+
N/A
tablebreak
MUSICAL BOX MOVEMENTS
Price per unit in £ on 28/03/2016
Approximately 52 x 44 x 21mm. Winder beneath the base.
MUSIC BOX MOVEMENT, 18 NOTE. Plays Lara's Theme.
MUSIC BOX MOVEMENT, 18 NOTE. Plays Fur Elise.
tablebreak
4-2
¦ Meadows & Passmore Ltd, 1 Ellen St, Brighton BN41 1EU Tel. 01273 421321 Fax. 01273 421322 ¦ © M&P 2014
4. Complete Movements & Kits
AMERICAN REPRODUCTION MOVEMENTS
Excellent reproductions of 19th century movements. All brass/steel construction.
Please note that as a typical American movement, you may need to make minor adjustments to the numerous striking wires, triggers etc when the movement has been fitted. It is
often necessary to adjust the count wheel and the fly on these units as they are easily put out of adjustment in transit.
These movements are manufactured in Asia, and we have great difficulty obtaining stock of consistent specifications. We do spot checks on the stock arriving, but cannot guarantee
that movements supplied will be exactly as described. However they are excellent value and with a little adjustment they make very authentic replacements for worn-out American
movements. Key, 8 day pendulum bob and suspension not included (unless specified).
You may require:
3.75mm key 0333 037518, 8 day bob 0233 030015, Suspension 0239 000115
1
2
Call
Harvey
3
24 Hours
Call
Harvey
our Automated
Sales line
Call Harvey
mastercard.jpg
for
Same day dispatch*
* Conditions apply
Price per unit in £ on 28/03/2016
1 AMERICAN STYLE STRIKING MOVEMENT Model C
0539 000415
Type: Time and Strike, Shaft to bottom of bob: 250mm, Escapement position: Front, Front plate to shaft tip: 27mm, Plate width:
92mm, Plate height: 135mm, Overal width inc wheels: 150mm, Overall height inc wheels: 150mm, Distance between winding
shaft centres: 80mm, Gap between plates: 35mm, Mounted onto back of case or on dial support: Back, Horizontal gap between
shaft & arbor centres: 33mm, Suitable 8 day bob part no: 0233 030015.
2 AMERICAN STYLE OPEN SPRING MOVEMENT Model D
0539 001315
Type: Time & Strike, Shaft to bottom of bob: 100mm, Escapement position: Rear, Front plate to shaft tip: 40mm, Plate width:
92mm, Plate height: 135mm, Overal width inc wheels: 150mm, Overall height inc wheels: 150mm, Distance between winding
shaft centres: 80mm, Gap between plates: 35mm, Mounted onto back of case or on dial support: Dia;, Horizontal gap between
shaft & arbor centres: 33mm.
3 AMERICAN STYLE OPEN SPRING MOVEMENT Model E
0539 001415
Type: Time & Strike, Shaft to bottom of bob: 300mm, Escapement position: Front, Front plate to shaft tip: 50mm, Plate width:
92mm, Plate height: 135mm, Overal width inc wheels: 150mm, Overall height inc wheels: 150mm, Distance between winding
shaft centres: 80mm, Gap between plates: 35mm, Mounted onto back of case or on dial support: Back, Horizontal gap between
shaft & arbor centres: 44mm, Suitable 8 day bob part no: 0233 030015.
1+
£54.55
1+
£50.26
1+
£50.35
tablebreak
INSERTION MOVEMENTS
For china and wooden cases. Quartz movements have second hands.
These normally fit into two types of case:
A. China or metal cases, generally with circular holes in the front and back surfaces. The inside is hollow.
B. Wooden cases, where a plain hole has been drilled right through the solid body.
Mechanical movements are unsuitable for solid cases, because the spring has to expand into the hollow body. If it is restricted by a solid case, the clock will stop long before the
spring has unwound. These movements are held in place simply by clamping the front bezel and the backplate together using screw threaded shafts and nuts. The case is
sandwiched between the two. The diameter of the front bezel and backplate are therefore important when selecting a suitable unit. To select a suitable movement, identify a model
that has a bezel large enough not to pass through the front hole.
Clearly the movement diameter must be less than the front hole or it cannot be inserted. Movement backplates on modern clocks are fairly small compared to some old china
clocks, and you may need to improvise if your case has a large hole in the back.
tablebreak
30 HOUR INSERTION MOVEMENTS
Suitable for hole depth of 32-45mm. European made.
v isacard.jpg
1
2
3
4
Call Harvey
Call
for
Postage free
delivery*
HARVEY
on
0800 328 9435
* Conditions apply
Price per unit in £ on 28/03/2016
1
2
3
4
30 HOUR INSERTION MOVEMENT 401 BRASS Bezel o/d 62mm. Hole o/d 55-60mm.
30 HOUR INSERTION MOVEMENT 402 BRASS Bezel o/d 65mm. Hole o/d 55-60mm.
30 HOUR INSERTION MOVEMENT 407 BRASS Bezel o/d 65mm. Hole o/d 55-60mm.
30 HOUR INSERTION MOVEMENT 408 BRASS Bezel o/d 65mm. Hole o/d 55-63mm.
0546 040113
0546 040213
0546 040713
0546 040813
1+
£27.17
1+
£27.17
1+
£27.17
1+
£27.17
tablebreak
QUARTZ INSERTION MOVEMENTS
A range of movements complete with dials, that can be fitted into hollow or solid cases. This range uses the LR1 battery - not included. See
battery section ref. 0349 000115
The range is fitted with centralised circular black plastic cased movements measuring 53mm outside diameter and 18mm thick. All feature
bezel, dial, hands, seconds hands, and movement and come ready to use. Suitable for china, metal and wooden cases, the hole will need to have
an outside diameter of at least 54mm wide, the bezel requires at least 5mm clearance, and each unit comes with 4 intergrated steel retaining
wires which can be trimmed as required.
No backplate is included, however we do sell small (68mm) and large (83mm) backplates to fit these movements, as detailed below.
maestrocard.jpg
M&P
1
2
3
4
Buy Online
@
Key Suppliers to
Clockmakers
www.m-p.co.uk
Price per unit in £ on 28/03/2016
1 QUARTZ INSERTION MOVEMENT Outside diameter 63mm, with black Arabic numerals and black baton style hands with
point. Brass bezel and white dial. Has 'Made in Germany' below bottom numeral.
2 QUARTZ INSERTION MOVEMENT Outside diameter 63mm, with black Roman numerals on a white lozenge. Black fancy
hands, Brass bezel and gilt dial. Has 'West Germany' below bottom numeral.
3 INSERTION MOVEMENT BACKPLATE KIT SMALL; 68mm Includes backplate, with two 40mm extending pillars and
two nuts.
4 INSERTION MOVEMENT BACKPLATE KIT LARGE; 83mm Includes backplate, with two 40mm extending pillars and
two nuts.
0546 142417
1+
£21.75
0546 142717
1+
£23.50
0546 150017
1+
£7.52
0546 160017
1+
£7.52
tablebreak
© M&P 2014 ¦ Meadows & Passmore Ltd, 1 Ellen St, Brighton BN41 1EU Tel. 01273 421321 Fax. 01273 421322 ¦
4-3
4. Complete Movements & Kits
MAINS SYNCHRONOUS MOVEMENT
Price per unit in £ on 28/03/2016
MAINS SYNCHRONOUS MOVEMENT 220v-240v 50Hz. 65mm x 30mm deep. Integral hanging
0645 002315
bracket. Standard hand fittings:- 5mm & 2.80mm x 3.5mm. Second hand facility. Case to shaft tip 23mm.
Max. dial thickness: 8mm. Suitable for our standard quartz hands.
1+
£25.17
SECOND HAND FOR SYNCHRONOUS MOVEMENT 130mm red.
1+
£3.85
0645 013018
tablebreak
MINIATURE PUBLIC CLOCK MOVEMENTS
Call
Harvey
1
24 Hours
Call
Harvey
our Automated
Sales line
mastercard.jpg
Call Harvey
Call Harvey
v isacard.jpg
for
Same day dispatch*
for
Postage free
delivery*
* Conditions apply
* Conditions apply
Price per unit in £ on 28/03/2016
1 MINIATURE PUBLIC CLOCK TRANSFORMER 240-24v 240v/24v transformer. One per movement is needed.
0760 000415
£26.50
1+
tablebreak
PUBLIC CLOCK MOVEMENTS
Call
1
2
3
4
HARVEY
on
0800 328 9435
maestrocard.jpg
M&P
Key Suppliers to
Clockmakers
Price per unit in £ on 28/03/2016
1 STANDARD PUBLIC CLOCK MOVEMENT, V20.
This movement is suitable for dials upto 12mm thick, with our hands up to 375mm, when colleted and counter-balanced. A
general purpose 240v 50Hz movement suitable for exterior clock dials and signs, when used with counter-balanced hands. It has
a conventional rear hand setting knob.
The non-ferrous construction is housed in a splashproof, dustproof case 150mm high x 80mm wide x 75mm deep. The 12mm
diameter shaft is 55mm long in total and is supplied complete with collets and dial centre fixing nuts.
2 EXTERIOR MOVEMENT INTERMEDIATE, V30.
This movement is suitable for dials upto 12mm thick, with our hands up to 410mm, when colleted and counter-balanced. A
general purpose 240v 50Hz movement suitable for exterior clock dials and signs, when used with counter-balanced hands. It has
a conventional rear hand setting knob.
The non-ferrous construction is housed in a splashproof, dustproof case 160mm high x 120mm wide x 140mm deep.
3 HEAVY DUTY 240v UNIT SYNCHRONOUS, V40.
This movement is suitable for dials upto 12mm thick, with our hands up to 530mm, when colleted and counter-balanced. Well
constructed 240v 50Hz movement suitable for exterior clock dials and signs, when used with counter-balanced hands. It has a
rear hand setting knob, and the hands can also be adjusted from the front. The non-ferrous construction is housed in a
splashproof, dustproof case 160mm high x 120mm wide x 140mm deep. The 1" / 25.4mm diameter shaft is 60mm long in total
and is supplied complete with collets and dial centre fixing nuts.
4 EXTENSION DRIVE FOR EXTERIOR MOVEMENT
These allow the above movements to be mounted behind a brick wall without affecting the accuracy of the timekeeping. 100mm
to 500mm available. Each one is made to suit, and fits directly onto the clock shafts.
1" / 25.4mm diameter shaft, up to 300mm in length
Shafts up to 1,000mm in length can be made. Please note that extension shafts cannot be fitted to our domestic movement.
0760 000815
1+
£259.06
0760 001215
1+
£342.72
0760 000515
1+
£429.81
0760 000915
1+
£145.83
tablebreak
FIXING KIT FOR EXTENSION DRIVE
FIXING KIT FOR EXTN. DRIVE This board with brass bush is fixed to the inner wall. It supports
movements with extended shafts, and allows the shaft position to be adjusted easily, to position the hands
as close as possible to the dial. 300mm square. 20mm thick.
Price per unit in £ on 28/03/2016
1188 000115
1+
£41.92
tablebreak
PUBLIC CLOCK RESYNCHRONISER
PUBLIC CLOCK RE-SYNCHRONISER
1189 000115
You can minimize the effect of power interruptions with this mains re-synchroniser. All breaks in the
power supply are timed. After a power cut of at least 15 seconds, the mains supply to the clock is switched
off for 12 hours less the accumulated time. This allows the clock to start again at the correct time.
Additional features include Summer/Winter (BST/GMT) adjustment at the press of a switch and clock
power control. It is also fitted with an internal battery that has a minimum life of 5 years and is trickled
charged from the mains. Up to four of our mains synchronous movements can be run from this unit.
Weight 800g. 180mm high, 230mm wide, 85mm deep.
Price per unit in £ on 28/03/2016
1+
£591.37
tablebreak
4-4
¦ Meadows & Passmore Ltd, 1 Ellen St, Brighton BN41 1EU Tel. 01273 421321 Fax. 01273 421322 ¦ © M&P 2014
4. Complete Movements & Kits
MASTER CLOCK CONTROLLER
Price per unit in £ on 28/03/2016
MASTER CLOCK CONTROLLER
1190 000115
Guarantee accuracy of a public clock by using the radio signals transmitted by MSF clock. This atomic
clock is very accurate and the signals cover an area up to 1000km from the MSF and can therefore be
picked up almost anywhere in the U.K. We cannot, of course, guarantee proper reception in every
geographic location. The transmitter sends out a British time signal which is monitored by the unit. At the
GMT/BST changes, the clock either stops for one hour or eleven hours. During power failures, the hands
will stop but the unit will continue to monitor the time using trickle charged batteries until power is
restored. When power is restored, the hands will remain stationary until they show the correct time. Will
operate up to four synchronous movements.
Weight 800g. 180mm high, 230mm wide, 85mm deep.
1+
£601.61
tablebreak
ROTARY PENDULUM DRIVES
Price per unit in £ on 28/03/2016
1195 526015
1+
£62.93
400 DAY ROTARY QUARTZ MOVEMENT Fully working rotary quartz movement which oscillates to 1195 040015
mimic many 400 day designs. Total height 85mm, width 58mm square. Runs on 1 "AA" battery which is
not included. This is for aesthetic purposes only and not a timekeeping device.
1+
£16.45
ROTARY PENDULUM DRIVE 52 x 60mm base, 20mm base height, 75mm total height, 50mm
pendulum height, 37mm pendulum width.
tablebreak
BLACKSTONE ANTI-CLOCKWISE CLOCK
Price per unit in £ on 28/03/2016
BLACKSTONE ANTI- CLOCKWISE CLOCK 190mm wide, 180mm print, 30mm deep.
0213 000115
Numbered and going anti-clockwise, the 'Blackstone' clock is an amusing and reliable timepiece; hang one
on the wall and see who notices!
Battery operated quartz wall clock.
Circular white plastic case with metal dial.
Often to be seen in bars, hotels and kitchens.
£17.39
1+
tablebreak
MOVEMENT AG
Price per unit in £ on 28/03/2016
1-DAY WEIGHT DRIVEN MOVEMENT Movement without strike or chime, fitted in a wooden box.
Complete with chain, wire pendulum, cast weight (250g), and clock hands (28/23mm). Pendulum length:
23cm. Centre hole diameter: 6mm min. Dial thickness: Upto 12mm.
1155 000115
1+
£50.77
tablebreak
© M&P 2014 ¦ Meadows & Passmore Ltd, 1 Ellen St, Brighton BN41 1EU Tel. 01273 421321 Fax. 01273 421322 ¦
4-5
Automated Sales Line
1,000'S OF CUSTOMERS NOW USE OUR AUTOMATED
SALES LINE BECAUSE THEY GET...
Same day despatch* ..................
Free postage & packing** ........
Free 0800 phone call .................
24 hour operation .....................
Price & availability info ...........
Technical data ...........................
Details on recent orders ..........
D
D
D
D
D
D
D
Call Harvey on
0800 328 9435
All backed up by our huge range of products, massive stocks and competitive prices.
HOW DO I USE IT?
Using your telephone keypad, simply dial 0800 328 9435 and select from the menu of options you will
hear.
You will need to identify yourself by keying in your customer number (not your old delivery point
code) and your secret pin. If you don’t know these, please call 01273 421321 during working hours.
Using your phone keypad, simply key in the part numbers or answers to the prompts. You’ll find the
system easy to use, and extremely friendly. If you have any problems, our trained staff are on hand to
help you during the working day.
Enter the part number.
You will hear the current price.
To use the system, you need a
modern telephone and your
CUSTOMER NO:
&
PIN:
Choose whether you want the
information faxed or posted. Enter
the part number (and your fax no.)
You will hear information about
your recent orders.
Prices
MENU
1: Price and availability
2: Technical info
3: Despatch information
4: Place a new order
5: Back-order info
Technical
Despatch
Orders
Backorders
Enter the part numbers and
quantities you wish to order.
Non account holders will be asked
for credit card details.
You will have the option of a faxed
confirmation.
You will hear information about
your back-orders.
Tips:
Hash is the ‘#’ key under the 9.
Be prepared. Write down all the
information you will need before
you call.
Use a tone telephone. If you hear
tones when you dial (not clicks)
then you have a tone phone. Many
telephones have a small switch on
the side to select DTMF tone
dialling. A pulse telephone will not
operate the system.
Write down the confirmation
number. You will hear this when
the order has been accepted.
*Call before 3pm on weekdays for same day despatch. **Free postage only applies to UK orders, and not to heavy or bulky items such as books, fluids, domes
etc. or very low value orders. Cannot be used in addition to other special discounts.
© M&P 2011
Meadows & Passmore Ltd. Brighton BN41 1EU Tel 01273 421321 Fax 01273 421322
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement