SignaMax Category 6A MT-Series Screened Patch Panels Installation instructions

Below you will find brief information for UTP Patch Panels 48458HD C6A, UTP Patch Panels 48458HD C6C, UTP Patch Panels 48458HD C6E. These panels are designed to be used in conjunction with Signamax premise connectivity systems. You can terminate keystone jacks both in an installed state and separately. They are compatible with 10-32 x 3/8 Philips pan head screws. They also come with a frame patching supplied mounting screws. You can install the panel in its intended possition in the equipment rack, cabinet or frame using supplied mounting screws.

PDF Download
Document
Signamax UTP Patch Panels Installation Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Field-configurable
  • Compatible with 10-32 x 3/8 Philips pan head screws
  • Frame patching supplied mounting screws
  • Keystone jack termination
  • Terminate keystone jacks both in an installed state and separately
  • Easy installation

Frequently asked questions

The UTP Patch Panels are compatible with 10-32 x 3/8 Philips pan head screws.

Yes, it comes with frame patching supplied mounting screws.

Yes, the UTP Patch Panel can be installed in the equipment rack, cabinet, or frame using the supplied mounting screws.

Yes, the UTP Patch Panels allow for keystone jack termination both in an installed state and separately.

Install the patch panel in its intended position in the equipment rack, cabinet, or frame using supplied mounting screws.

You will need an electrician's scissors or other cable cutting tool, cable jacket stripping tool, and a single-conductor termination tool with 110 cutting blade to install the UTP Patch Panels.
Preparing document for printing…
0%