HotLok Blanking Panels with Temperature Strip Applications Features

HotLok Blanking Panels with Temperature Strip Applications Features
HotLok® Blanking Panels with Temperature Strip
Part Numbers
Black 1U - 10035
Black 2U - 10038
1U Blanking Panel - Part No. 10035
2U Blanking Panel - Part No. 10038
The HotLok® Blanking Panel is a snap-in blanking panel
that seals the rack 29% better than the nearest competitor and helps you identify hot spots within minutes of
installation. The cabinet temperatures are indicated
in color-coded ranges, depending on location of temperature strip panel. The state-of-the-art technology,
designed for both 1U and 2U openings, controls airflow
for optimized cooling effectiveness and is Upsite’s latest
green solution for energy savings and reducing the carbon
footprint of data centers.
Cantilevered sealing vanes eliminate the gap between adjoining Blanking Panels or with installed equipment
Tool-free, snap-in installation requires no additional parts
or components for installation
Easy-pull removal for any EIA-310-E standard openings using
ergonomically designed finger grips
1U Panels stack 10 high and 2U Panels stack 20 high for easy
storage and ready availability
Upsite® Temperature Strip color-coded temperature ranges
indicates potential hot spots by color based on ASHRAE
HotLok® Blanking Panels with Temperature Strips are a
prerequisite to all cooling configurations best practices
including hot and cold aisle containment
Both 1U and 2U configured versions achieve the following:
Reduce hot spots and bypass airflow by preventing equipment exhaust air or hot-aisle air from migrating to the
conditioned air-intake stream at the front of the cabinet
Deliver lower temperature conditioned air to the upper
one-third of the cabinet, typically the hottest area and
most prone to equipment failure
Control airflow to save energy by adjusting cooling unit
Identify temperatures within a particular range, accurate
to within +/- 1° C:
Use 1U and 2U versions on cabinets with standard 19-inch
rail widths (483 millimeter) or with any standard EIA-310-E
Use to determine the temperature at that position in the
cabinet or install throughout to determine the range of
temperatures from the top to the bottom of the cabinets
Use in a Hot and Cold Aisle layout for low or high heat
density cabinets
Use in existing cabinets for optimization and standardization
P/N 60091 RevA © 2012
Part No. 10035 - 1U - Overall size (length x height)
19” x 1.75”
482.5 x 44.45mm
Part No. 10038 - 2U - Overall size (length x height)
19” x 3.5”
482.5 x 89mm
Reading the Temperature Strip
Frame Materials
The liquid crystal material in the Upsite® Temperature
Strip shows temperatures in ranges of green, brown, and
blue. The actual temperature is indicated when the liquid
crystal material is green. If green is not visible on the
Temperature Strip, the actual temperature will be the
number between the brown and blue colors.
Black – ABS (Acrylonitrile Butadiene Styrene)
1U Product Image
The colored range indicators denote the following:
Blue: Optimal Operating Range based on recommendations
as updated in ASHRAE’s 2008 Environmental Guidelines for
Datacom Equipment
Yellow: Acceptable Operating Range based on equipment
manufacturers’ recommendations for Class 1 IT equipment
Red: Outside acceptable operating range—indicates a
definite hotspot above 90°F (32°C) or potential for condensation below 59°F (15°C), either of which may result in
equipment failure
Patented Rack Sealing System
U.S. design patent number D577,360 and multiple International design patents. U.S. and International utility
patents pending
Winner of the Best Product Award
in the Infrastructure category.
Designer & Manufacturer
(888) 982-7800
2U Product Image
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF