BL - Data Sheet

BL - Data Sheet
Data sheet
BL
Sheet No.: BL1.01 RevA
Date: October 2010
BL Hydraulic linear single-acting actuator
Description:
The BL actuator converts hydraulic energy into linear motion with thrust proportional to the
applied pressure. The BL has no external moving parts during operation and has a built-in
device for maintaining pressure at temperature variations. The BL is designed with built-in
crossover valve and is equipped with a direct visual position indicator. The BL actuator
can be operated in any kind of environment and can easily be adapted to all well-known
globe valves, and all models are prepared for direct built-on modular control functions.
Manufacture:
The BL actuators are manufactured in accordance with the guidelines for quality system
stated in the American standard ANSI/ASQC Z-1.15.
After assembly, each actuator is flushed to NAS 1638/10 standard and plugged. Flushing to
NAS 1648/7 standard can be performed on request.
Classification:
Meets the requirements from the major
classification and approval authorities
like:
Det Norske Veritas
Lloyd’s Register of Shipping
American Bureau of Shipping
Rina
Russian Register of Shipping
Bureau of Veritas
Germanischer Lloyd
U.S. Coast Guard
Main data:
www.Bettis.com
Temperature range:
-20˚C to +80˚C (-5˚F to +180˚F)
Housing:
GGG40
(Ductile Iron)
Piston:
GGG40
(Ductile Iron)
Output spindle:
Brass, other material on request
Indicator housing:
Brass MS 58
Intermediate flange:
St 52-3,
Coating:
Primer: Min 40 micron, type Hempel EE 13140
Top coat: Min 25 micron alkyd, orange RAL
2002
(Carbon Steel)
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
BL
Sheet No.: BL1.02 RevA
Date: October 2010
Main dimensions:
(Inches in parenthesis)
Technical data:
Working pressure:
135 bar (2000 psi)
Test pressure:
1.5 x working pressure
Burst test:
min. 675 bar
End closing thrust (spring): 17000-92500 N
Viscosity of hydraulic oil:
15 to 200 cSt
Dimensions:
Thrust
lbf
N
Weight
lb
Kg
Displacement
cu.in.
litres
Dimensions
inches
mm
Thrust at Thrust at
1550 psi 1950 psi
Dimensions Bottom View
Dimensions Front View
Model
Stroke
Weight Displace-
(108 bar) (135 bar)
ment
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
BL 65
3057
3822
0.64
10
1
2.44
0.35
13600
17000
16.25
4.5
0.021
62
9
BL 125
6295
7868
1.23
15
5
2.95
0.35
28000
35000
31.25
7
0.082
75
9
BL 250
16636
20795
2.46
53
26
4.65
0.55
74000
92500
62.5
24
0.428
118
14
3.15 1.87
80
47.5
-
-
-
-
3.07 1.97 2.05 2.83
78
50
52
72
2.76 3.31 3.07 2.83
70
84
78
72
1.36
1.42
34.5
36
1.67
1.65
42.5
42
2.91
2.83
74
72
2.99 0.67
76
17
3.54 0.75
90
19
5.51 0.91
140
23
0.59
6.02
6.22
-
3.15
0.79
0.36
1.32
15
153
158
-
80
20
9
33.5
0.79
7.44
7.95
1.77
3.84
0.98
0.36
1.32
20
189
1.38 11.77
35
299
202
45
97.5
25
9
33.5
12.64
3.15
6.10
1.97
0.36
1.32
321
80
155
50
9
33.5
U
0.87 2.48
22
63
0.87 2.48
22
63
0.87 2.48
22
63
*Higher torques on request - For lower pressure supply consult factory.
Standard features:
The BL actuator for intermediate positions and fail set operation of globe valves:
- Direct visual postion indication
- Unique and simple design with built-in
- Built-in device for maintaining pressure
crossover valve
at temperature variations
- Easy installation on intermediate flange
- Hydraullic on/off position indication
at globe valve
- Electrical on/off or continuous position
- Same unit for several valve sizes
indication IP 68
- Will operate in sea air as well as sea
- Connection block with fiter
water
- Pilot operated non-return valve
- No external moving parts during
- Release valve
operation
- Prepared for direct built-on modular
control functions or LPU
- Throttle valve
- Quick conncetion for emergency
operation with portable hand pump
- LPU mounting
- Epoxy coating
- On request special features as:
°Flushing valve built into the connection
block making it possible to flush the
system without disconnection of pipes
Note: Not Certified dimensional drawings. Such drawings are available on request. Contact factory with correct model designation and serial number.
Important: Due to Emerson’s continuing commitment to engineered product advancement, data presented herin is subject to change.
The contents of the publication are presented for information purposes only, and while effort has been made to ensure their accuracy,
they are not to be construed as warranties or guarantees, expresses or implied, regarding the products or services described herein or their use or applicability.
All sales are governed by our terms and conditions, which are available on request.
We reserve the right to modify or improve the designs or specifications of our products at any time without notice.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement