- No category
advertisement
WinCT (Windows Communication Tools) Ver. 5.12 28/03/2016 for Windows 10 Windows 8.1 / Windows 7 / Windows Vista
English edition
CD-ROM for windows
Copyright (c) 1998 A&D Company limited.
Setup text
==================================================================
=========
WinCT (Windows Communication Tools)
---------------------------------------------------------------------------
WinCT is a program for transmitting data from an A&D balance to a computer.
Below are instructions for installation and use of WinCT.
==================================================================
=========
1. System Requirements
---------------------------------------------------------------------------
Computer OS Microsoft Windows 10 Windows 8.1 / Windows 7 / Windows
Vista
RS-232C 1port
- If the computer has no COM port, a Serial/USB converter is
available as an accessory to add a COM port on the computer.
A cable will also be attached for the connection with a balance.
The balance's RS-232C has 25 pins -> Model No. AX-USB-25P-EX
The balance's RS-232C has 9 pins -> Model No. AX-USB-9P-EX
Balance An A&D balance with an RS-232C interface
Cable An RS-232C cable
CAUTION
- Use an English version of Windows for proper operation of WinCT.
- If WinCT is operated on Windows except for an English version, the
computer may show incorrect characters of data which is already stored
before installing WinCT.
- Back up your important data in the computer before installing WinCT.
==================================================================
=========
2. Installation Instructions
---------------------------------------------------------------------------
Step 1 If a previous version of WinCT is installed on the computer, uninstall the previous version of WinCT.
Step 2 Close all open applications in Windows.
Step 3 Install WinCT.
Run WinCT_Setup.msi.
Step 4 Install WinCT following the instructions on the screen.
==================================================================
=========
3. Starting WinCT
---------------------------------------------------------------------------
Select either RsCom or RsKey or RsWeight from the START menu. The default menu address is [Start] - [program] - [A&D WinCT]. You will find the instruction manual in the Readme file under [A&D WinCT].
RsCom This window is able to transmit the weighing date using a text
file format to a computer. This window also transmits commands
for operating an A&D balance.
RsKey Weighing data is imported directly into an application, such as
MS Excel. However, this window cannot be used to send commands
to a balance.
RsWeight The weighing data can be retrieved from the balance and displayed
in graph form on the monitor screen in real-time. Maximum, minimum,
average,standard deviation and coefficient of variation values of
data can be calculated and displayed.
CAUTION
- WinCT is a program for balances that use the A&D format. A&D does not
guarantee performance or compatibility when other manufacture's balances
are used with WinCT.
- If you have problems or questions about compatibility with third party
software, contact the manufactures for information.
==================================================================
=========
4.License Agreement and Limited Warranty
---------------------------------------------------------------------------
- WinCT is subject to change without notice and does not represent a
commitment by A&D to support earlier versions or to make changes to
support non standard computers.
- WinCT is intended for the transmission of the weighing data from an A&D
balance to a PC, and command transmission for controlling the balance.
- Under copyright laws, the WinCT program may not be copied, in whole or
part, without the consent of A&D, except as specified in the license
agreement.
- WinCT should only be installed on the hard disk or peripheral storage
devices of a computer connected to an A&D balance.
- A&D bears no liability for direct, indirect, special, incidental, or
consequential damages resulting from any defect in the WinCT program or
the readme file, even when advised of the possibility of such damage.
- A&D is not responsible or liable for the loss of any programs and/or
data stored in the computer on which WinCT was installed, including the
costs of recovering said lost programs or data.
Microsoft, Windows, Excel and Word are trademarks or registered trademarks of Microsoft Corporation.
==================================================================
=========
5. Uninstall Instructions
---------------------------------------------------------------------------
Use the "Add/Remove Programs" icon in the control panel to remove this program from your computer.
==================================================================
=========
End of Setup Text
==================================================================
=========
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project